| /* |
| * Copyright 2006, The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <arpa/inet.h> |
| #include <dirent.h> |
| #include <elf.h> |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <pthread.h> |
| #include <signal.h> |
| #include <stdarg.h> |
| #include <stdio.h> |
| #include <sys/poll.h> |
| #include <sys/prctl.h> |
| #include <sys/ptrace.h> |
| #include <sys/socket.h> |
| #include <sys/stat.h> |
| #include <sys/types.h> |
| #include <sys/wait.h> |
| #include <sys/un.h> |
| #include <time.h> |
| |
| #include <memory> |
| #include <set> |
| #include <string> |
| |
| #include <selinux/android.h> |
| |
| #include <log/logger.h> |
| |
| #include <android-base/file.h> |
| #include <android-base/unique_fd.h> |
| #include <cutils/debugger.h> |
| #include <cutils/properties.h> |
| #include <cutils/sockets.h> |
| |
| #include <linux/input.h> |
| |
| #include <private/android_filesystem_config.h> |
| |
| #include <debuggerd/client.h> |
| |
| #include "backtrace.h" |
| #include "getevent.h" |
| #include "signal_sender.h" |
| #include "tombstone.h" |
| #include "utility.h" |
| |
| // If the 32 bit executable is compiled on a 64 bit system, |
| // use the 32 bit socket name. |
| #if defined(TARGET_IS_64_BIT) && !defined(__LP64__) |
| #define SOCKET_NAME DEBUGGER32_SOCKET_NAME |
| #else |
| #define SOCKET_NAME DEBUGGER_SOCKET_NAME |
| #endif |
| |
| struct debugger_request_t { |
| debugger_action_t action; |
| pid_t pid, tid; |
| uid_t uid, gid; |
| uintptr_t abort_msg_address; |
| }; |
| |
| static void wait_for_user_action(const debugger_request_t& request) { |
| // Explain how to attach the debugger. |
| ALOGI("***********************************************************\n" |
| "* Process %d has been suspended while crashing.\n" |
| "* To attach gdbserver and start gdb, run this on the host:\n" |
| "*\n" |
| "* gdbclient.py -p %d\n" |
| "*\n" |
| "* Wait for gdb to start, then press the VOLUME DOWN key\n" |
| "* to let the process continue crashing.\n" |
| "***********************************************************", |
| request.pid, request.tid); |
| |
| // Wait for VOLUME DOWN. |
| while (true) { |
| input_event e; |
| if (get_event(&e, -1) == 0) { |
| if (e.type == EV_KEY && e.code == KEY_VOLUMEDOWN && e.value == 0) { |
| break; |
| } |
| } |
| } |
| |
| ALOGI("debuggerd resuming process %d", request.pid); |
| } |
| |
| static int get_process_info(pid_t tid, pid_t* out_pid, uid_t* out_uid, uid_t* out_gid) { |
| char path[64]; |
| snprintf(path, sizeof(path), "/proc/%d/status", tid); |
| |
| FILE* fp = fopen(path, "r"); |
| if (!fp) { |
| return -1; |
| } |
| |
| int fields = 0; |
| char line[1024]; |
| while (fgets(line, sizeof(line), fp)) { |
| size_t len = strlen(line); |
| if (len > 6 && !memcmp(line, "Tgid:\t", 6)) { |
| *out_pid = atoi(line + 6); |
| fields |= 1; |
| } else if (len > 5 && !memcmp(line, "Uid:\t", 5)) { |
| *out_uid = atoi(line + 5); |
| fields |= 2; |
| } else if (len > 5 && !memcmp(line, "Gid:\t", 5)) { |
| *out_gid = atoi(line + 5); |
| fields |= 4; |
| } |
| } |
| fclose(fp); |
| return fields == 7 ? 0 : -1; |
| } |
| |
| /* |
| * Corresponds with debugger_action_t enum type in |
| * include/cutils/debugger.h. |
| */ |
| static const char *debuggerd_perms[] = { |
| NULL, /* crash is only used on self, no check applied */ |
| "dump_tombstone", |
| "dump_backtrace" |
| }; |
| |
| static int audit_callback(void* data, security_class_t /* cls */, char* buf, size_t len) |
| { |
| struct debugger_request_t* req = reinterpret_cast<debugger_request_t*>(data); |
| |
| if (!req) { |
| ALOGE("No debuggerd request audit data"); |
| return 0; |
| } |
| |
| snprintf(buf, len, "pid=%d uid=%d gid=%d", req->pid, req->uid, req->gid); |
| return 0; |
| } |
| |
| static bool selinux_action_allowed(int s, debugger_request_t* request) |
| { |
| char *scon = NULL, *tcon = NULL; |
| const char *tclass = "debuggerd"; |
| const char *perm; |
| bool allowed = false; |
| |
| if (request->action <= 0 || request->action >= (sizeof(debuggerd_perms)/sizeof(debuggerd_perms[0]))) { |
| ALOGE("SELinux: No permission defined for debugger action %d", request->action); |
| return false; |
| } |
| |
| perm = debuggerd_perms[request->action]; |
| |
| if (getpeercon(s, &scon) < 0) { |
| ALOGE("Cannot get peer context from socket\n"); |
| goto out; |
| } |
| |
| if (getpidcon(request->tid, &tcon) < 0) { |
| ALOGE("Cannot get context for tid %d\n", request->tid); |
| goto out; |
| } |
| |
| allowed = (selinux_check_access(scon, tcon, tclass, perm, reinterpret_cast<void*>(request)) == 0); |
| |
| out: |
| freecon(scon); |
| freecon(tcon); |
| return allowed; |
| } |
| |
| static bool pid_contains_tid(pid_t pid, pid_t tid) { |
| char task_path[PATH_MAX]; |
| if (snprintf(task_path, PATH_MAX, "/proc/%d/task/%d", pid, tid) >= PATH_MAX) { |
| ALOGE("debuggerd: task path overflow (pid = %d, tid = %d)\n", pid, tid); |
| exit(1); |
| } |
| |
| return access(task_path, F_OK) == 0; |
| } |
| |
| static int read_request(int fd, debugger_request_t* out_request) { |
| ucred cr; |
| socklen_t len = sizeof(cr); |
| int status = getsockopt(fd, SOL_SOCKET, SO_PEERCRED, &cr, &len); |
| if (status != 0) { |
| ALOGE("cannot get credentials"); |
| return -1; |
| } |
| |
| ALOGV("reading tid"); |
| pollfd pollfds[1]; |
| pollfds[0].fd = fd; |
| pollfds[0].events = POLLIN; |
| pollfds[0].revents = 0; |
| status = TEMP_FAILURE_RETRY(poll(pollfds, 1, 3000)); |
| if (status != 1) { |
| ALOGE("timed out reading tid (from pid=%d uid=%d)\n", cr.pid, cr.uid); |
| return -1; |
| } |
| |
| debugger_msg_t msg; |
| memset(&msg, 0, sizeof(msg)); |
| status = TEMP_FAILURE_RETRY(read(fd, &msg, sizeof(msg))); |
| if (status < 0) { |
| ALOGE("read failure? %s (pid=%d uid=%d)\n", strerror(errno), cr.pid, cr.uid); |
| return -1; |
| } |
| if (status != sizeof(debugger_msg_t)) { |
| ALOGE("invalid crash request of size %d (from pid=%d uid=%d)\n", status, cr.pid, cr.uid); |
| return -1; |
| } |
| |
| out_request->action = static_cast<debugger_action_t>(msg.action); |
| out_request->tid = msg.tid; |
| out_request->pid = cr.pid; |
| out_request->uid = cr.uid; |
| out_request->gid = cr.gid; |
| out_request->abort_msg_address = msg.abort_msg_address; |
| |
| if (msg.action == DEBUGGER_ACTION_CRASH) { |
| // Ensure that the tid reported by the crashing process is valid. |
| // This check needs to happen again after ptracing the requested thread to prevent a race. |
| if (!pid_contains_tid(out_request->pid, out_request->tid)) { |
| ALOGE("tid %d does not exist in pid %d. ignoring debug request\n", out_request->tid, |
| out_request->pid); |
| return -1; |
| } |
| } else if (cr.uid == 0 || (cr.uid == AID_SYSTEM && msg.action == DEBUGGER_ACTION_DUMP_BACKTRACE)) { |
| // Only root or system can ask us to attach to any process and dump it explicitly. |
| // However, system is only allowed to collect backtraces but cannot dump tombstones. |
| status = get_process_info(out_request->tid, &out_request->pid, |
| &out_request->uid, &out_request->gid); |
| if (status < 0) { |
| ALOGE("tid %d does not exist. ignoring explicit dump request\n", out_request->tid); |
| return -1; |
| } |
| |
| if (!selinux_action_allowed(fd, out_request)) |
| return -1; |
| } else { |
| // No one else is allowed to dump arbitrary processes. |
| return -1; |
| } |
| return 0; |
| } |
| |
| static int activity_manager_connect() { |
| android::base::unique_fd amfd(socket(PF_UNIX, SOCK_STREAM, 0)); |
| if (amfd.get() < -1) { |
| ALOGE("debuggerd: Unable to connect to activity manager (socket failed: %s)", strerror(errno)); |
| return -1; |
| } |
| |
| struct sockaddr_un address; |
| memset(&address, 0, sizeof(address)); |
| address.sun_family = AF_UNIX; |
| // The path used here must match the value defined in NativeCrashListener.java. |
| strncpy(address.sun_path, "/data/system/ndebugsocket", sizeof(address.sun_path)); |
| if (TEMP_FAILURE_RETRY(connect(amfd.get(), reinterpret_cast<struct sockaddr*>(&address), |
| sizeof(address))) == -1) { |
| ALOGE("debuggerd: Unable to connect to activity manager (connect failed: %s)", strerror(errno)); |
| return -1; |
| } |
| |
| struct timeval tv; |
| memset(&tv, 0, sizeof(tv)); |
| tv.tv_sec = 1; // tight leash |
| if (setsockopt(amfd.get(), SOL_SOCKET, SO_SNDTIMEO, &tv, sizeof(tv)) == -1) { |
| ALOGE("debuggerd: Unable to connect to activity manager (setsockopt SO_SNDTIMEO failed: %s)", |
| strerror(errno)); |
| return -1; |
| } |
| |
| tv.tv_sec = 3; // 3 seconds on handshake read |
| if (setsockopt(amfd.get(), SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv)) == -1) { |
| ALOGE("debuggerd: Unable to connect to activity manager (setsockopt SO_RCVTIMEO failed: %s)", |
| strerror(errno)); |
| return -1; |
| } |
| |
| return amfd.release(); |
| } |
| |
| static void activity_manager_write(int pid, int signal, int amfd, const std::string& amfd_data) { |
| if (amfd == -1) { |
| return; |
| } |
| |
| // Activity Manager protocol: binary 32-bit network-byte-order ints for the |
| // pid and signal number, followed by the raw text of the dump, culminating |
| // in a zero byte that marks end-of-data. |
| uint32_t datum = htonl(pid); |
| if (!android::base::WriteFully(amfd, &datum, 4)) { |
| ALOGE("AM pid write failed: %s\n", strerror(errno)); |
| return; |
| } |
| datum = htonl(signal); |
| if (!android::base::WriteFully(amfd, &datum, 4)) { |
| ALOGE("AM signal write failed: %s\n", strerror(errno)); |
| return; |
| } |
| |
| if (!android::base::WriteFully(amfd, amfd_data.c_str(), amfd_data.size())) { |
| ALOGE("AM data write failed: %s\n", strerror(errno)); |
| return; |
| } |
| |
| // Send EOD to the Activity Manager, then wait for its ack to avoid racing |
| // ahead and killing the target out from under it. |
| uint8_t eodMarker = 0; |
| if (!android::base::WriteFully(amfd, &eodMarker, 1)) { |
| ALOGE("AM eod write failed: %s\n", strerror(errno)); |
| return; |
| } |
| // 3 sec timeout reading the ack; we're fine if the read fails. |
| android::base::ReadFully(amfd, &eodMarker, 1); |
| } |
| |
| static bool should_attach_gdb(const debugger_request_t& request) { |
| if (request.action == DEBUGGER_ACTION_CRASH) { |
| return property_get_bool("debug.debuggerd.wait_for_gdb", false); |
| } |
| return false; |
| } |
| |
| #if defined(__LP64__) |
| static bool is32bit(pid_t tid) { |
| char* exeline; |
| if (asprintf(&exeline, "/proc/%d/exe", tid) == -1) { |
| return false; |
| } |
| int fd = TEMP_FAILURE_RETRY(open(exeline, O_RDONLY | O_CLOEXEC)); |
| int saved_errno = errno; |
| free(exeline); |
| if (fd == -1) { |
| ALOGW("Failed to open /proc/%d/exe %s", tid, strerror(saved_errno)); |
| return false; |
| } |
| |
| char ehdr[EI_NIDENT]; |
| ssize_t bytes = TEMP_FAILURE_RETRY(read(fd, &ehdr, sizeof(ehdr))); |
| close(fd); |
| if (bytes != (ssize_t) sizeof(ehdr) || memcmp(ELFMAG, ehdr, SELFMAG) != 0) { |
| return false; |
| } |
| if (ehdr[EI_CLASS] == ELFCLASS32) { |
| return true; |
| } |
| return false; |
| } |
| |
| static void redirect_to_32(int fd, debugger_request_t* request) { |
| debugger_msg_t msg; |
| memset(&msg, 0, sizeof(msg)); |
| msg.tid = request->tid; |
| msg.action = request->action; |
| |
| int sock_fd = socket_local_client(DEBUGGER32_SOCKET_NAME, ANDROID_SOCKET_NAMESPACE_ABSTRACT, |
| SOCK_STREAM | SOCK_CLOEXEC); |
| if (sock_fd < 0) { |
| ALOGE("Failed to connect to debuggerd32: %s", strerror(errno)); |
| return; |
| } |
| |
| if (TEMP_FAILURE_RETRY(write(sock_fd, &msg, sizeof(msg))) != (ssize_t) sizeof(msg)) { |
| ALOGE("Failed to write request to debuggerd32 socket: %s", strerror(errno)); |
| close(sock_fd); |
| return; |
| } |
| |
| char ack; |
| if (TEMP_FAILURE_RETRY(read(sock_fd, &ack, 1)) == -1) { |
| ALOGE("Failed to read ack from debuggerd32 socket: %s", strerror(errno)); |
| close(sock_fd); |
| return; |
| } |
| |
| char buffer[1024]; |
| ssize_t bytes_read; |
| while ((bytes_read = TEMP_FAILURE_RETRY(read(sock_fd, buffer, sizeof(buffer)))) > 0) { |
| ssize_t bytes_to_send = bytes_read; |
| ssize_t bytes_written; |
| do { |
| bytes_written = TEMP_FAILURE_RETRY(write(fd, buffer + bytes_read - bytes_to_send, |
| bytes_to_send)); |
| if (bytes_written == -1) { |
| if (errno == EAGAIN) { |
| // Retry the write. |
| continue; |
| } |
| ALOGE("Error while writing data to fd: %s", strerror(errno)); |
| break; |
| } |
| bytes_to_send -= bytes_written; |
| } while (bytes_written != 0 && bytes_to_send > 0); |
| if (bytes_to_send != 0) { |
| ALOGE("Failed to write all data to fd: read %zd, sent %zd", bytes_read, bytes_to_send); |
| break; |
| } |
| } |
| close(sock_fd); |
| } |
| #endif |
| |
| // Attach to a thread, and verify that it's still a member of the given process |
| static bool ptrace_attach_thread(pid_t pid, pid_t tid) { |
| if (ptrace(PTRACE_ATTACH, tid, 0, 0) != 0) { |
| return false; |
| } |
| |
| // Make sure that the task we attached to is actually part of the pid we're dumping. |
| if (!pid_contains_tid(pid, tid)) { |
| if (ptrace(PTRACE_DETACH, tid, 0, 0) != 0) { |
| ALOGE("debuggerd: failed to detach from thread '%d'", tid); |
| exit(1); |
| } |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static void ptrace_siblings(pid_t pid, pid_t main_tid, std::set<pid_t>& tids) { |
| char task_path[PATH_MAX]; |
| |
| if (snprintf(task_path, PATH_MAX, "/proc/%d/task", pid) >= PATH_MAX) { |
| ALOGE("debuggerd: task path overflow (pid = %d)\n", pid); |
| abort(); |
| } |
| |
| std::unique_ptr<DIR, int (*)(DIR*)> d(opendir(task_path), closedir); |
| |
| // Bail early if the task directory cannot be opened. |
| if (!d) { |
| ALOGE("debuggerd: failed to open /proc/%d/task: %s", pid, strerror(errno)); |
| return; |
| } |
| |
| struct dirent* de; |
| while ((de = readdir(d.get())) != NULL) { |
| // Ignore "." and "..". |
| if (!strcmp(de->d_name, ".") || !strcmp(de->d_name, "..")) { |
| continue; |
| } |
| |
| char* end; |
| pid_t tid = strtoul(de->d_name, &end, 10); |
| if (*end) { |
| continue; |
| } |
| |
| if (tid == main_tid) { |
| continue; |
| } |
| |
| if (!ptrace_attach_thread(pid, tid)) { |
| ALOGE("debuggerd: ptrace attach to %d failed: %s", tid, strerror(errno)); |
| continue; |
| } |
| |
| tids.insert(tid); |
| } |
| } |
| |
| static bool perform_dump(const debugger_request_t& request, int fd, int tombstone_fd, |
| BacktraceMap* backtrace_map, const std::set<pid_t>& siblings, |
| int* crash_signal, std::string* amfd_data) { |
| if (TEMP_FAILURE_RETRY(write(fd, "\0", 1)) != 1) { |
| ALOGE("debuggerd: failed to respond to client: %s\n", strerror(errno)); |
| return false; |
| } |
| |
| while (true) { |
| // wait_for_signal waits for forever, but the watchdog process will kill us |
| // if it takes too long. |
| int signal = wait_for_signal(request.tid); |
| switch (signal) { |
| case -1: |
| ALOGE("debuggerd: timed out waiting for signal"); |
| return false; |
| |
| case SIGSTOP: |
| if (request.action == DEBUGGER_ACTION_DUMP_TOMBSTONE) { |
| ALOGV("debuggerd: stopped -- dumping to tombstone"); |
| engrave_tombstone(tombstone_fd, backtrace_map, request.pid, request.tid, siblings, |
| request.abort_msg_address, amfd_data); |
| } else if (request.action == DEBUGGER_ACTION_DUMP_BACKTRACE) { |
| ALOGV("debuggerd: stopped -- dumping to fd"); |
| dump_backtrace(fd, backtrace_map, request.pid, request.tid, siblings, nullptr); |
| } else { |
| ALOGV("debuggerd: stopped -- continuing"); |
| if (ptrace(PTRACE_CONT, request.tid, 0, 0) != 0) { |
| ALOGE("debuggerd: ptrace continue failed: %s", strerror(errno)); |
| return false; |
| } |
| continue; // loop again |
| } |
| break; |
| |
| case SIGABRT: |
| case SIGBUS: |
| case SIGFPE: |
| case SIGILL: |
| case SIGSEGV: |
| #ifdef SIGSTKFLT |
| case SIGSTKFLT: |
| #endif |
| case SIGSYS: |
| case SIGTRAP: |
| ALOGV("stopped -- fatal signal\n"); |
| *crash_signal = signal; |
| engrave_tombstone(tombstone_fd, backtrace_map, request.pid, request.tid, siblings, |
| request.abort_msg_address, amfd_data); |
| break; |
| |
| default: |
| ALOGE("debuggerd: process stopped due to unexpected signal %d\n", signal); |
| break; |
| } |
| break; |
| } |
| |
| return true; |
| } |
| |
| static bool drop_privileges() { |
| // AID_LOG: for reading the logs data associated with the crashing process. |
| // AID_READPROC: for reading /proc/<PID>/{comm,cmdline}. |
| gid_t groups[] = { AID_DEBUGGERD, AID_LOG, AID_READPROC }; |
| if (setgroups(sizeof(groups)/sizeof(groups[0]), groups) != 0) { |
| ALOGE("debuggerd: failed to setgroups: %s", strerror(errno)); |
| return false; |
| } |
| |
| if (setresgid(AID_DEBUGGERD, AID_DEBUGGERD, AID_DEBUGGERD) != 0) { |
| ALOGE("debuggerd: failed to setresgid: %s", strerror(errno)); |
| return false; |
| } |
| |
| if (setresuid(AID_DEBUGGERD, AID_DEBUGGERD, AID_DEBUGGERD) != 0) { |
| ALOGE("debuggerd: failed to setresuid: %s", strerror(errno)); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static void worker_process(int fd, debugger_request_t& request) { |
| // Open the tombstone file if we need it. |
| std::string tombstone_path; |
| int tombstone_fd = -1; |
| switch (request.action) { |
| case DEBUGGER_ACTION_DUMP_TOMBSTONE: |
| case DEBUGGER_ACTION_CRASH: |
| tombstone_fd = open_tombstone(&tombstone_path); |
| if (tombstone_fd == -1) { |
| ALOGE("debuggerd: failed to open tombstone file: %s\n", strerror(errno)); |
| exit(1); |
| } |
| break; |
| |
| case DEBUGGER_ACTION_DUMP_BACKTRACE: |
| break; |
| |
| default: |
| ALOGE("debuggerd: unexpected request action: %d", request.action); |
| exit(1); |
| } |
| |
| // At this point, the thread that made the request is blocked in |
| // a read() call. If the thread has crashed, then this gives us |
| // time to PTRACE_ATTACH to it before it has a chance to really fault. |
| // |
| // The PTRACE_ATTACH sends a SIGSTOP to the target process, but it |
| // won't necessarily have stopped by the time ptrace() returns. (We |
| // currently assume it does.) We write to the file descriptor to |
| // ensure that it can run as soon as we call PTRACE_CONT below. |
| // See details in client/debuggerd_client.cpp, in function |
| // debugger_signal_handler(). |
| |
| // Attach to the target process. |
| if (!ptrace_attach_thread(request.pid, request.tid)) { |
| ALOGE("debuggerd: ptrace attach failed: %s", strerror(errno)); |
| exit(1); |
| } |
| |
| // DEBUGGER_ACTION_CRASH requests can come from arbitrary processes and the tid field in the |
| // request is sent from the other side. If an attacker can cause a process to be spawned with the |
| // pid of their process, they could trick debuggerd into dumping that process by exiting after |
| // sending the request. Validate the trusted request.uid/gid to defend against this. |
| if (request.action == DEBUGGER_ACTION_CRASH) { |
| pid_t pid; |
| uid_t uid; |
| gid_t gid; |
| if (get_process_info(request.tid, &pid, &uid, &gid) != 0) { |
| ALOGE("debuggerd: failed to get process info for tid '%d'", request.tid); |
| exit(1); |
| } |
| |
| if (pid != request.pid || uid != request.uid || gid != request.gid) { |
| ALOGE( |
| "debuggerd: attached task %d does not match request: " |
| "expected pid=%d,uid=%d,gid=%d, actual pid=%d,uid=%d,gid=%d", |
| request.tid, request.pid, request.uid, request.gid, pid, uid, gid); |
| exit(1); |
| } |
| } |
| |
| // Don't attach to the sibling threads if we want to attach gdb. |
| // Supposedly, it makes the process less reliable. |
| bool attach_gdb = should_attach_gdb(request); |
| if (attach_gdb) { |
| // Open all of the input devices we need to listen for VOLUMEDOWN before dropping privileges. |
| if (init_getevent() != 0) { |
| ALOGE("debuggerd: failed to initialize input device, not waiting for gdb"); |
| attach_gdb = false; |
| } |
| |
| } |
| |
| std::set<pid_t> siblings; |
| if (!attach_gdb) { |
| ptrace_siblings(request.pid, request.tid, siblings); |
| } |
| |
| // Generate the backtrace map before dropping privileges. |
| std::unique_ptr<BacktraceMap> backtrace_map(BacktraceMap::Create(request.pid)); |
| |
| int amfd = -1; |
| std::unique_ptr<std::string> amfd_data; |
| if (request.action == DEBUGGER_ACTION_CRASH) { |
| // Connect to the activity manager before dropping privileges. |
| amfd = activity_manager_connect(); |
| amfd_data.reset(new std::string); |
| } |
| |
| bool succeeded = false; |
| |
| // Now that we've done everything that requires privileges, we can drop them. |
| if (!drop_privileges()) { |
| ALOGE("debuggerd: failed to drop privileges, exiting"); |
| _exit(1); |
| } |
| |
| int crash_signal = SIGKILL; |
| succeeded = perform_dump(request, fd, tombstone_fd, backtrace_map.get(), siblings, |
| &crash_signal, amfd_data.get()); |
| if (succeeded) { |
| if (request.action == DEBUGGER_ACTION_DUMP_TOMBSTONE) { |
| if (!tombstone_path.empty()) { |
| android::base::WriteFully(fd, tombstone_path.c_str(), tombstone_path.length()); |
| } |
| } |
| } |
| |
| if (attach_gdb) { |
| // Tell the signal process to send SIGSTOP to the target. |
| if (!send_signal(request.pid, 0, SIGSTOP)) { |
| ALOGE("debuggerd: failed to stop process for gdb attach: %s", strerror(errno)); |
| attach_gdb = false; |
| } |
| } |
| |
| if (!attach_gdb) { |
| // Tell the Activity Manager about the crashing process. If we are |
| // waiting for gdb to attach, do not send this or Activity Manager |
| // might kill the process before anyone can attach. |
| activity_manager_write(request.pid, crash_signal, amfd, *amfd_data.get()); |
| } |
| |
| if (ptrace(PTRACE_DETACH, request.tid, 0, 0) != 0) { |
| ALOGE("debuggerd: ptrace detach from %d failed: %s", request.tid, strerror(errno)); |
| } |
| |
| for (pid_t sibling : siblings) { |
| ptrace(PTRACE_DETACH, sibling, 0, 0); |
| } |
| |
| // Send the signal back to the process if it crashed and we're not waiting for gdb. |
| if (!attach_gdb && request.action == DEBUGGER_ACTION_CRASH) { |
| if (!send_signal(request.pid, request.tid, crash_signal)) { |
| ALOGE("debuggerd: failed to kill process %d: %s", request.pid, strerror(errno)); |
| } |
| } |
| |
| // Wait for gdb, if requested. |
| if (attach_gdb) { |
| wait_for_user_action(request); |
| |
| // Now tell the activity manager about this process. |
| activity_manager_write(request.pid, crash_signal, amfd, *amfd_data.get()); |
| |
| // Tell the signal process to send SIGCONT to the target. |
| if (!send_signal(request.pid, 0, SIGCONT)) { |
| ALOGE("debuggerd: failed to resume process %d: %s", request.pid, strerror(errno)); |
| } |
| |
| uninit_getevent(); |
| } |
| |
| close(amfd); |
| |
| exit(!succeeded); |
| } |
| |
| static void monitor_worker_process(int child_pid, const debugger_request_t& request) { |
| struct timespec timeout = {.tv_sec = 10, .tv_nsec = 0 }; |
| if (should_attach_gdb(request)) { |
| // If wait_for_gdb is enabled, set the timeout to something large. |
| timeout.tv_sec = INT_MAX; |
| } |
| |
| sigset_t signal_set; |
| sigemptyset(&signal_set); |
| sigaddset(&signal_set, SIGCHLD); |
| |
| bool kill_worker = false; |
| bool kill_target = false; |
| bool kill_self = false; |
| |
| int status; |
| siginfo_t siginfo; |
| int signal = TEMP_FAILURE_RETRY(sigtimedwait(&signal_set, &siginfo, &timeout)); |
| if (signal == SIGCHLD) { |
| pid_t rc = waitpid(-1, &status, WNOHANG | WUNTRACED); |
| if (rc != child_pid) { |
| ALOGE("debuggerd: waitpid returned unexpected pid (%d), committing murder-suicide", rc); |
| |
| if (WIFEXITED(status)) { |
| ALOGW("debuggerd: pid %d exited with status %d", rc, WEXITSTATUS(status)); |
| } else if (WIFSIGNALED(status)) { |
| ALOGW("debuggerd: pid %d received signal %d", rc, WTERMSIG(status)); |
| } else if (WIFSTOPPED(status)) { |
| ALOGW("debuggerd: pid %d stopped by signal %d", rc, WSTOPSIG(status)); |
| } else if (WIFCONTINUED(status)) { |
| ALOGW("debuggerd: pid %d continued", rc); |
| } |
| |
| kill_worker = true; |
| kill_target = true; |
| kill_self = true; |
| } else if (WIFSIGNALED(status)) { |
| ALOGE("debuggerd: worker process %d terminated due to signal %d", child_pid, WTERMSIG(status)); |
| kill_worker = false; |
| kill_target = true; |
| } else if (WIFSTOPPED(status)) { |
| ALOGE("debuggerd: worker process %d stopped due to signal %d", child_pid, WSTOPSIG(status)); |
| kill_worker = true; |
| kill_target = true; |
| } |
| } else { |
| ALOGE("debuggerd: worker process %d timed out", child_pid); |
| kill_worker = true; |
| kill_target = true; |
| } |
| |
| if (kill_worker) { |
| // Something bad happened, kill the worker. |
| if (kill(child_pid, SIGKILL) != 0) { |
| ALOGE("debuggerd: failed to kill worker process %d: %s", child_pid, strerror(errno)); |
| } else { |
| waitpid(child_pid, &status, 0); |
| } |
| } |
| |
| int exit_signal = SIGCONT; |
| if (kill_target && request.action == DEBUGGER_ACTION_CRASH) { |
| ALOGE("debuggerd: killing target %d", request.pid); |
| exit_signal = SIGKILL; |
| } else { |
| ALOGW("debuggerd: resuming target %d", request.pid); |
| } |
| |
| if (kill(request.pid, exit_signal) != 0) { |
| ALOGE("debuggerd: failed to send signal %d to target: %s", exit_signal, strerror(errno)); |
| } |
| |
| if (kill_self) { |
| stop_signal_sender(); |
| _exit(1); |
| } |
| } |
| |
| static void handle_request(int fd) { |
| ALOGV("handle_request(%d)\n", fd); |
| |
| android::base::unique_fd closer(fd); |
| debugger_request_t request; |
| memset(&request, 0, sizeof(request)); |
| int status = read_request(fd, &request); |
| if (status != 0) { |
| return; |
| } |
| |
| ALOGW("debuggerd: handling request: pid=%d uid=%d gid=%d tid=%d\n", request.pid, request.uid, |
| request.gid, request.tid); |
| |
| #if defined(__LP64__) |
| // On 64 bit systems, requests to dump 32 bit and 64 bit tids come |
| // to the 64 bit debuggerd. If the process is a 32 bit executable, |
| // redirect the request to the 32 bit debuggerd. |
| if (is32bit(request.tid)) { |
| // Only dump backtrace and dump tombstone requests can be redirected. |
| if (request.action == DEBUGGER_ACTION_DUMP_BACKTRACE || |
| request.action == DEBUGGER_ACTION_DUMP_TOMBSTONE) { |
| redirect_to_32(fd, &request); |
| } else { |
| ALOGE("debuggerd: Not allowed to redirect action %d to 32 bit debuggerd\n", request.action); |
| } |
| return; |
| } |
| #endif |
| |
| // Fork a child to handle the rest of the request. |
| pid_t fork_pid = fork(); |
| if (fork_pid == -1) { |
| ALOGE("debuggerd: failed to fork: %s\n", strerror(errno)); |
| } else if (fork_pid == 0) { |
| worker_process(fd, request); |
| } else { |
| monitor_worker_process(fork_pid, request); |
| } |
| } |
| |
| static int do_server() { |
| // debuggerd crashes can't be reported to debuggerd. |
| // Reset all of the crash handlers. |
| signal(SIGABRT, SIG_DFL); |
| signal(SIGBUS, SIG_DFL); |
| signal(SIGFPE, SIG_DFL); |
| signal(SIGILL, SIG_DFL); |
| signal(SIGSEGV, SIG_DFL); |
| #ifdef SIGSTKFLT |
| signal(SIGSTKFLT, SIG_DFL); |
| #endif |
| signal(SIGTRAP, SIG_DFL); |
| |
| // Ignore failed writes to closed sockets |
| signal(SIGPIPE, SIG_IGN); |
| |
| // Block SIGCHLD so we can sigtimedwait for it. |
| sigset_t sigchld; |
| sigemptyset(&sigchld); |
| sigaddset(&sigchld, SIGCHLD); |
| sigprocmask(SIG_SETMASK, &sigchld, nullptr); |
| |
| int s = socket_local_server(SOCKET_NAME, ANDROID_SOCKET_NAMESPACE_ABSTRACT, |
| SOCK_STREAM | SOCK_CLOEXEC); |
| if (s == -1) return 1; |
| |
| // Fork a process that stays root, and listens on a pipe to pause and resume the target. |
| if (!start_signal_sender()) { |
| ALOGE("debuggerd: failed to fork signal sender"); |
| return 1; |
| } |
| |
| ALOGI("debuggerd: starting\n"); |
| |
| for (;;) { |
| ALOGV("waiting for connection\n"); |
| int fd = accept4(s, nullptr, nullptr, SOCK_CLOEXEC | SOCK_NONBLOCK); |
| if (fd == -1) { |
| ALOGE("accept failed: %s\n", strerror(errno)); |
| continue; |
| } |
| |
| handle_request(fd); |
| } |
| return 0; |
| } |
| |
| static int do_explicit_dump(pid_t tid, bool dump_backtrace) { |
| fprintf(stdout, "Sending request to dump task %d...\n", tid); |
| fflush(stdout); |
| |
| // TODO: we could have better error reporting if debuggerd sent an error string back. |
| if (dump_backtrace) { |
| if (dump_backtrace_to_file(tid, fileno(stdout)) < 0) { |
| fputs("Error dumping backtrace (check logcat).\n", stderr); |
| return 1; |
| } |
| } else { |
| char tombstone_path[PATH_MAX]; |
| if (dump_tombstone(tid, tombstone_path, sizeof(tombstone_path)) < 0) { |
| fputs("Error dumping tombstone (check logcat).\n", stderr); |
| return 1; |
| } |
| fprintf(stderr, "Tombstone written to: %s\n", tombstone_path); |
| } |
| return 0; |
| } |
| |
| static int usage() { |
| fputs("usage: debuggerd [-b] [<tid>]\n" |
| "\n" |
| "Given a thread id, sends a request to debuggerd to dump that thread.\n" |
| "Otherwise, starts the debuggerd server.\n" |
| "\n" |
| "-b\tdump backtrace to console, otherwise generate tombstone\n", stderr); |
| return EXIT_FAILURE; |
| } |
| |
| int main(int argc, char** argv) { |
| union selinux_callback cb; |
| if (argc == 1) { |
| cb.func_audit = audit_callback; |
| selinux_set_callback(SELINUX_CB_AUDIT, cb); |
| cb.func_log = selinux_log_callback; |
| selinux_set_callback(SELINUX_CB_LOG, cb); |
| return do_server(); |
| } |
| |
| bool dump_backtrace = false; |
| pid_t tid = 0; |
| for (int i = 1; i < argc; i++) { |
| if (!strcmp(argv[i], "-b")) { |
| dump_backtrace = true; |
| } else if (tid != 0 || (tid = atoi(argv[i])) == 0) { |
| // Only one tid is allowed. (And 0 isn't a valid tid.) |
| // atoi(3) returns 0 on failure to parse, so this catches anything else too. |
| return usage(); |
| } |
| } |
| return (tid != 0) ? do_explicit_dump(tid, dump_backtrace) : usage(); |
| } |