| /* |
| * Copyright (C) 2013 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define _GNU_SOURCE 1 |
| #include <errno.h> |
| #include <stdint.h> |
| #include <string.h> |
| #include <sys/param.h> |
| #include <sys/ptrace.h> |
| #include <sys/types.h> |
| #include <ucontext.h> |
| #include <unistd.h> |
| |
| #include <string> |
| |
| #include <backtrace/Backtrace.h> |
| #include <backtrace/BacktraceMap.h> |
| |
| #include "BacktraceCurrent.h" |
| #include "BacktraceLog.h" |
| #include "ThreadEntry.h" |
| #include "thread_utils.h" |
| |
| bool BacktraceCurrent::ReadWord(uintptr_t ptr, word_t* out_value) { |
| if (!VerifyReadWordArgs(ptr, out_value)) { |
| return false; |
| } |
| |
| backtrace_map_t map; |
| FillInMap(ptr, &map); |
| if (BacktraceMap::IsValid(map) && map.flags & PROT_READ) { |
| *out_value = *reinterpret_cast<word_t*>(ptr); |
| return true; |
| } else { |
| BACK_LOGW("pointer %p not in a readable map", reinterpret_cast<void*>(ptr)); |
| *out_value = static_cast<word_t>(-1); |
| return false; |
| } |
| } |
| |
| size_t BacktraceCurrent::Read(uintptr_t addr, uint8_t* buffer, size_t bytes) { |
| backtrace_map_t map; |
| FillInMap(addr, &map); |
| if (!BacktraceMap::IsValid(map) || !(map.flags & PROT_READ)) { |
| return 0; |
| } |
| bytes = MIN(map.end - addr, bytes); |
| memcpy(buffer, reinterpret_cast<uint8_t*>(addr), bytes); |
| return bytes; |
| } |
| |
| bool BacktraceCurrent::Unwind(size_t num_ignore_frames, ucontext_t* ucontext) { |
| if (GetMap() == nullptr) { |
| // Without a map object, we can't do anything. |
| return false; |
| } |
| |
| if (ucontext) { |
| return UnwindFromContext(num_ignore_frames, ucontext); |
| } |
| |
| if (Tid() != gettid()) { |
| return UnwindThread(num_ignore_frames); |
| } |
| |
| return UnwindFromContext(num_ignore_frames, nullptr); |
| } |
| |
| bool BacktraceCurrent::DiscardFrame(const backtrace_frame_data_t& frame) { |
| if (BacktraceMap::IsValid(frame.map)) { |
| const std::string library = basename(frame.map.name.c_str()); |
| if (library == "libunwind.so" || library == "libbacktrace.so") { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| static pthread_mutex_t g_sigaction_mutex = PTHREAD_MUTEX_INITIALIZER; |
| |
| static void SignalLogOnly(int, siginfo_t*, void*) { |
| BACK_LOGE("pid %d, tid %d: Received a spurious signal %d\n", getpid(), gettid(), THREAD_SIGNAL); |
| } |
| |
| static void SignalHandler(int, siginfo_t*, void* sigcontext) { |
| ThreadEntry* entry = ThreadEntry::Get(getpid(), gettid(), false); |
| if (!entry) { |
| BACK_LOGE("pid %d, tid %d entry not found", getpid(), gettid()); |
| return; |
| } |
| |
| entry->CopyUcontextFromSigcontext(sigcontext); |
| |
| // Indicate the ucontext is now valid. |
| entry->Wake(); |
| |
| // Pause the thread until the unwind is complete. This avoids having |
| // the thread run ahead causing problems. |
| // The number indicates that we are waiting for the second Wake() call |
| // overall which is made by the thread requesting an unwind. |
| if (entry->Wait(2)) { |
| // Do not remove the entry here because that can result in a deadlock |
| // if the code cannot properly send a signal to the thread under test. |
| entry->Wake(); |
| } else { |
| // At this point, it is possible that entry has been freed, so just exit. |
| BACK_LOGE("Timed out waiting for unwind thread to indicate it completed."); |
| } |
| } |
| |
| bool BacktraceCurrent::UnwindThread(size_t num_ignore_frames) { |
| // Prevent multiple threads trying to set the trigger action on different |
| // threads at the same time. |
| pthread_mutex_lock(&g_sigaction_mutex); |
| |
| ThreadEntry* entry = ThreadEntry::Get(Pid(), Tid()); |
| entry->Lock(); |
| |
| struct sigaction act, oldact; |
| memset(&act, 0, sizeof(act)); |
| act.sa_sigaction = SignalHandler; |
| act.sa_flags = SA_RESTART | SA_SIGINFO | SA_ONSTACK; |
| sigemptyset(&act.sa_mask); |
| if (sigaction(THREAD_SIGNAL, &act, &oldact) != 0) { |
| BACK_LOGE("sigaction failed: %s", strerror(errno)); |
| ThreadEntry::Remove(entry); |
| pthread_mutex_unlock(&g_sigaction_mutex); |
| return false; |
| } |
| |
| if (tgkill(Pid(), Tid(), THREAD_SIGNAL) != 0) { |
| BACK_LOGE("tgkill %d failed: %s", Tid(), strerror(errno)); |
| sigaction(THREAD_SIGNAL, &oldact, nullptr); |
| ThreadEntry::Remove(entry); |
| pthread_mutex_unlock(&g_sigaction_mutex); |
| return false; |
| } |
| |
| // Wait for the thread to get the ucontext. The number indicates |
| // that we are waiting for the first Wake() call made by the thread. |
| bool wait_completed = entry->Wait(1); |
| |
| if (!wait_completed && oldact.sa_sigaction == nullptr) { |
| // If the wait failed, it could be that the signal could not be delivered |
| // within the timeout. Add a signal handler that's simply going to log |
| // something so that we don't crash if the signal eventually gets |
| // delivered. Only do this if there isn't already an action set up. |
| memset(&act, 0, sizeof(act)); |
| act.sa_sigaction = SignalLogOnly; |
| act.sa_flags = SA_RESTART | SA_SIGINFO | SA_ONSTACK; |
| sigemptyset(&act.sa_mask); |
| sigaction(THREAD_SIGNAL, &act, nullptr); |
| } else { |
| sigaction(THREAD_SIGNAL, &oldact, nullptr); |
| } |
| // After the thread has received the signal, allow other unwinders to |
| // continue. |
| pthread_mutex_unlock(&g_sigaction_mutex); |
| |
| bool unwind_done = false; |
| if (wait_completed) { |
| unwind_done = UnwindFromContext(num_ignore_frames, entry->GetUcontext()); |
| |
| // Tell the signal handler to exit and release the entry. |
| entry->Wake(); |
| |
| // Wait for the thread to indicate it is done with the ThreadEntry. |
| if (!entry->Wait(3)) { |
| // Send a warning, but do not mark as a failure to unwind. |
| BACK_LOGW("Timed out waiting for signal handler to indicate it finished."); |
| } |
| } else { |
| BACK_LOGE("Timed out waiting for signal handler to get ucontext data."); |
| } |
| |
| ThreadEntry::Remove(entry); |
| |
| return unwind_done; |
| } |