| #!/usr/bin/env python |
| # Copyright (C) 2015 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| """Record the event logs during boot and output them to a file. |
| |
| This script repeats the record of each event log during Android boot specified |
| times. By default, interval between measurements is adjusted in such a way that |
| CPUs are cooled down sufficiently to avoid boot time slowdown caused by CPU |
| thermal throttling. The result is output in a tab-separated value format. |
| |
| Examples: |
| |
| Repeat measurements 10 times. Interval between iterations is adjusted based on |
| CPU temperature of the device. |
| |
| $ ./perfboot.py --iterations=10 |
| |
| Repeat measurements 20 times. 60 seconds interval is taken between each |
| iteration. |
| |
| $ ./perfboot.py --iterations=20 --interval=60 |
| |
| Repeat measurements 20 times, show verbose output, output the result to |
| data.tsv, and read event tags from eventtags.txt. |
| |
| $ ./perfboot.py --iterations=30 -v --output=data.tsv --tags=eventtags.txt |
| """ |
| |
| import argparse |
| import atexit |
| import cStringIO |
| import glob |
| import inspect |
| import logging |
| import math |
| import os |
| import re |
| import subprocess |
| import sys |
| import threading |
| import time |
| |
| sys.path.append(os.path.dirname(os.path.dirname(__file__))) |
| import adb |
| |
| # The default event tags to record. |
| _DEFAULT_EVENT_TAGS = [ |
| 'boot_progress_start', |
| 'boot_progress_preload_start', |
| 'boot_progress_preload_end', |
| 'boot_progress_system_run', |
| 'boot_progress_pms_start', |
| 'boot_progress_pms_system_scan_start', |
| 'boot_progress_pms_data_scan_start', |
| 'boot_progress_pms_scan_end', |
| 'boot_progress_pms_ready', |
| 'boot_progress_ams_ready', |
| 'boot_progress_enable_screen', |
| 'sf_stop_bootanim', |
| 'wm_boot_animation_done', |
| ] |
| |
| |
| class IntervalAdjuster(object): |
| """A helper class to take suffficient interval between iterations.""" |
| |
| # CPU temperature values per product used to decide interval |
| _CPU_COOL_DOWN_THRESHOLDS = { |
| 'flo': 40, |
| 'flounder': 40000, |
| 'razor': 40, |
| 'volantis': 40000, |
| } |
| # The interval between CPU temperature checks |
| _CPU_COOL_DOWN_WAIT_INTERVAL = 10 |
| # The wait time used when the value of _CPU_COOL_DOWN_THRESHOLDS for |
| # the product is not defined. |
| _CPU_COOL_DOWN_WAIT_TIME_DEFAULT = 120 |
| |
| def __init__(self, interval, device): |
| self._interval = interval |
| self._device = device |
| self._temp_paths = device.shell( |
| ['ls', '/sys/class/thermal/thermal_zone*/temp']).splitlines() |
| self._product = device.get_prop('ro.build.product') |
| self._waited = False |
| |
| def wait(self): |
| """Waits certain amount of time for CPUs cool-down.""" |
| if self._interval is None: |
| self._wait_cpu_cool_down(self._product, self._temp_paths) |
| else: |
| if self._waited: |
| print 'Waiting for %d seconds' % self._interval |
| time.sleep(self._interval) |
| self._waited = True |
| |
| def _get_cpu_temp(self, threshold): |
| max_temp = 0 |
| for temp_path in self._temp_paths: |
| temp = int(self._device.shell(['cat', temp_path]).rstrip()) |
| max_temp = max(max_temp, temp) |
| if temp >= threshold: |
| return temp |
| return max_temp |
| |
| def _wait_cpu_cool_down(self, product, temp_paths): |
| threshold = IntervalAdjuster._CPU_COOL_DOWN_THRESHOLDS.get( |
| self._product) |
| if threshold is None: |
| print 'No CPU temperature threshold is set for ' + self._product |
| print ('Just wait %d seconds' % |
| IntervalAdjuster._CPU_COOL_DOWN_WAIT_TIME_DEFAULT) |
| time.sleep(IntervalAdjuster._CPU_COOL_DOWN_WAIT_TIME_DEFAULT) |
| return |
| while True: |
| temp = self._get_cpu_temp(threshold) |
| if temp < threshold: |
| logging.info('Current CPU temperature %s' % temp) |
| return |
| print 'Waiting until CPU temperature (%d) falls below %d' % ( |
| temp, threshold) |
| time.sleep(IntervalAdjuster._CPU_COOL_DOWN_WAIT_INTERVAL) |
| |
| |
| class WatchdogTimer(object): |
| """A timer that makes is_timedout() return true in |timeout| seconds.""" |
| def __init__(self, timeout): |
| self._timedout = False |
| |
| def notify_timeout(): |
| self._timedout = True |
| self._timer = threading.Timer(timeout, notify_timeout) |
| self._timer.daemon = True |
| self._timer.start() |
| |
| def is_timedout(self): |
| return self._timedout |
| |
| def cancel(self): |
| self._timer.cancel() |
| |
| |
| def readlines_unbuffered(proc): |
| """Read lines from |proc|'s standard out without buffering.""" |
| while True: |
| buf = [] |
| c = proc.stdout.read(1) |
| if c == '' and proc.poll() is not None: |
| break |
| while c != '\n': |
| if c == '' and proc.poll() is not None: |
| break |
| buf.append(c) |
| c = proc.stdout.read(1) |
| yield ''.join(buf) |
| |
| |
| def disable_dropbox(device): |
| """Removes the files created by Dropbox and avoids creating the files.""" |
| device.root() |
| device.wait() |
| device.shell(['rm', '-rf', '/system/data/dropbox']) |
| original_dropbox_max_files = device.shell( |
| ['settings', 'get', 'global', 'dropbox_max_files']).rstrip() |
| device.shell(['settings', 'put', 'global', 'dropbox_max_files', '0']) |
| return original_dropbox_max_files |
| |
| |
| def restore_dropbox(device, original_dropbox_max_files): |
| """Restores the dropbox_max_files setting.""" |
| device.root() |
| device.wait() |
| if original_dropbox_max_files == 'null': |
| device.shell(['settings', 'delete', 'global', 'dropbox_max_files']) |
| else: |
| device.shell(['settings', 'put', 'global', 'dropbox_max_files', |
| original_dropbox_max_files]) |
| |
| |
| def init_perf(device, output, record_list, tags): |
| device.wait() |
| build_type = device.get_prop('ro.build.type') |
| original_dropbox_max_files = None |
| if build_type != 'user': |
| # Workaround for Dropbox issue (http://b/20890386). |
| original_dropbox_max_files = disable_dropbox(device) |
| |
| def cleanup(): |
| try: |
| if record_list: |
| print_summary(record_list, tags[-1]) |
| output_results(output, record_list, tags) |
| if original_dropbox_max_files is not None: |
| restore_dropbox(device, original_dropbox_max_files) |
| except (subprocess.CalledProcessError, RuntimeError): |
| pass |
| atexit.register(cleanup) |
| |
| |
| def check_dm_verity_settings(device): |
| device.wait() |
| for partition in ['system', 'vendor']: |
| verity_mode = device.get_prop('partition.%s.verified' % partition) |
| if verity_mode is None: |
| logging.warning('dm-verity is not enabled for /%s. Did you run ' |
| 'adb disable-verity? That may skew the result.', |
| partition) |
| |
| |
| def read_event_tags(tags_file): |
| """Reads event tags from |tags_file|.""" |
| if not tags_file: |
| return _DEFAULT_EVENT_TAGS |
| tags = [] |
| with open(tags_file) as f: |
| for line in f: |
| if '#' in line: |
| line = line[:line.find('#')] |
| line = line.strip() |
| if line: |
| tags.append(line) |
| return tags |
| |
| |
| def make_event_tags_re(tags): |
| """Makes a regular expression object that matches event logs of |tags|.""" |
| return re.compile(r'(?P<pid>[0-9]+) +[0-9]+ I (?P<tag>%s): (?P<time>\d+)' % |
| '|'.join(tags)) |
| |
| |
| def filter_event_tags(tags, device): |
| """Drop unknown tags not listed in device's event-log-tags file.""" |
| device.wait() |
| supported_tags = set() |
| for l in device.shell(['cat', '/system/etc/event-log-tags']).splitlines(): |
| tokens = l.split(' ') |
| if len(tokens) >= 2: |
| supported_tags.add(tokens[1]) |
| filtered = [] |
| for tag in tags: |
| if tag in supported_tags: |
| filtered.append(tag) |
| else: |
| logging.warning('Unknown tag \'%s\'. Ignoring...', tag) |
| return filtered |
| |
| |
| def get_values(record, tag): |
| """Gets values that matches |tag| from |record|.""" |
| keys = [key for key in record.keys() if key[0] == tag] |
| return [record[k] for k in sorted(keys)] |
| |
| |
| def get_last_value(record, tag): |
| """Gets the last value that matches |tag| from |record|.""" |
| values = get_values(record, tag) |
| if not values: |
| return 0 |
| return values[-1] |
| |
| |
| def output_results(filename, record_list, tags): |
| """Outputs |record_list| into |filename| in a TSV format.""" |
| # First, count the number of the values of each tag. |
| # This is for dealing with events that occur multiple times. |
| # For instance, boot_progress_preload_start and boot_progress_preload_end |
| # are recorded twice on 64-bit system. One is for 64-bit zygote process |
| # and the other is for 32-bit zygote process. |
| values_counter = {} |
| for record in record_list: |
| for tag in tags: |
| # Some record might lack values for some tags due to unanticipated |
| # problems (e.g. timeout), so take the maximum count among all the |
| # record. |
| values_counter[tag] = max(values_counter.get(tag, 1), |
| len(get_values(record, tag))) |
| |
| # Then creates labels for the data. If there are multiple values for one |
| # tag, labels for these values are numbered except the first one as |
| # follows: |
| # |
| # event_tag event_tag2 event_tag3 |
| # |
| # The corresponding values are sorted in an ascending order of PID. |
| labels = [] |
| for tag in tags: |
| for i in range(1, values_counter[tag] + 1): |
| labels.append('%s%s' % (tag, '' if i == 1 else str(i))) |
| |
| # Finally write the data into the file. |
| with open(filename, 'w') as f: |
| f.write('\t'.join(labels) + '\n') |
| for record in record_list: |
| line = cStringIO.StringIO() |
| invalid_line = False |
| for i, tag in enumerate(tags): |
| if i != 0: |
| line.write('\t') |
| values = get_values(record, tag) |
| if len(values) < values_counter[tag]: |
| invalid_line = True |
| # Fill invalid record with 0 |
| values += [0] * (values_counter[tag] - len(values)) |
| line.write('\t'.join(str(t) for t in values)) |
| if invalid_line: |
| logging.error('Invalid record found: ' + line.getvalue()) |
| line.write('\n') |
| f.write(line.getvalue()) |
| print 'Wrote: ' + filename |
| |
| |
| def median(data): |
| """Calculates the median value from |data|.""" |
| data = sorted(data) |
| n = len(data) |
| if n % 2 == 1: |
| return data[n / 2] |
| else: |
| n2 = n / 2 |
| return (data[n2 - 1] + data[n2]) / 2.0 |
| |
| |
| def mean(data): |
| """Calculates the mean value from |data|.""" |
| return float(sum(data)) / len(data) |
| |
| |
| def stddev(data): |
| """Calculates the standard deviation value from |value|.""" |
| m = mean(data) |
| return math.sqrt(sum((x - m) ** 2 for x in data) / len(data)) |
| |
| |
| def print_summary(record_list, end_tag): |
| """Prints the summary of |record_list|.""" |
| # Filter out invalid data. |
| end_times = [get_last_value(record, end_tag) for record in record_list |
| if get_last_value(record, end_tag) != 0] |
| print 'mean: ', mean(end_times) |
| print 'median:', median(end_times) |
| print 'standard deviation:', stddev(end_times) |
| |
| |
| def do_iteration(device, interval_adjuster, event_tags_re, end_tag): |
| """Measures the boot time once.""" |
| device.wait() |
| interval_adjuster.wait() |
| device.reboot() |
| print 'Rebooted the device' |
| record = {} |
| booted = False |
| while not booted: |
| device.wait() |
| # Stop the iteration if it does not finish within 120 seconds. |
| timeout = 120 |
| t = WatchdogTimer(timeout) |
| p = subprocess.Popen( |
| ['adb', 'logcat', '-b', 'events', '-v', 'threadtime'], |
| stdout=subprocess.PIPE) |
| for line in readlines_unbuffered(p): |
| if t.is_timedout(): |
| print '*** Timed out ***' |
| return record |
| m = event_tags_re.search(line) |
| if not m: |
| continue |
| tag = m.group('tag') |
| event_time = int(m.group('time')) |
| pid = m.group('pid') |
| record[(tag, pid)] = event_time |
| print 'Event log recorded: %s (%s) - %d ms' % ( |
| tag, pid, event_time) |
| if tag == end_tag: |
| booted = True |
| t.cancel() |
| break |
| return record |
| |
| |
| def parse_args(): |
| """Parses the command line arguments.""" |
| parser = argparse.ArgumentParser( |
| description=inspect.getdoc(sys.modules[__name__]), |
| formatter_class=argparse.RawDescriptionHelpFormatter) |
| parser.add_argument('--iterations', type=int, default=5, |
| help='Number of times to repeat boot measurements.') |
| parser.add_argument('--interval', type=int, |
| help=('Duration between iterations. If this is not ' |
| 'set explicitly, durations are determined ' |
| 'adaptively based on CPUs temperature.')) |
| parser.add_argument('-o', '--output', help='File name of output data.') |
| parser.add_argument('-v', '--verbose', action='store_true', |
| help='Show verbose output.') |
| parser.add_argument('-s', '--serial', default=os.getenv('ANDROID_SERIAL'), |
| help='Adb device serial number.') |
| parser.add_argument('-t', '--tags', help='Specify the filename from which ' |
| 'event tags are read. Every line contains one event ' |
| 'tag and the last event tag is used to detect that ' |
| 'the device has finished booting unless --end-tag is ' |
| 'specified.') |
| parser.add_argument('--end-tag', help='An event tag on which the script ' |
| 'stops measuring the boot time.') |
| parser.add_argument('--apk-dir', help='Specify the directory which contains ' |
| 'APK files to be installed before measuring boot time.') |
| return parser.parse_args() |
| |
| |
| def install_apks(device, apk_dir): |
| for apk in glob.glob(os.path.join(apk_dir, '*.apk')): |
| print 'Installing: ' + apk |
| device.install(apk, replace=True) |
| |
| |
| def main(): |
| args = parse_args() |
| if args.verbose: |
| logging.getLogger().setLevel(logging.INFO) |
| |
| device = adb.get_device(args.serial) |
| |
| if not args.output: |
| device.wait() |
| args.output = 'perf-%s-%s.tsv' % ( |
| device.get_prop('ro.build.flavor'), |
| device.get_prop('ro.build.version.incremental')) |
| check_dm_verity_settings(device) |
| |
| if args.apk_dir: |
| install_apks(device, args.apk_dir) |
| |
| record_list = [] |
| event_tags = filter_event_tags(read_event_tags(args.tags), device) |
| end_tag = args.end_tag or event_tags[-1] |
| if end_tag not in event_tags: |
| sys.exit('%s is not a valid tag.' % end_tag) |
| event_tags = event_tags[0 : event_tags.index(end_tag) + 1] |
| init_perf(device, args.output, record_list, event_tags) |
| interval_adjuster = IntervalAdjuster(args.interval, device) |
| event_tags_re = make_event_tags_re(event_tags) |
| |
| for i in range(args.iterations): |
| print 'Run #%d ' % i |
| record = do_iteration( |
| device, interval_adjuster, event_tags_re, end_tag) |
| record_list.append(record) |
| |
| |
| if __name__ == '__main__': |
| main() |