blob: d00d57959460e827c175465681d4fb80bb6a9ae5 [file] [log] [blame]
William Roberts29d238d2013-02-08 09:45:26 +09001/*
2 * Copyright 2012, Samsung Telecommunications of America
3 * Copyright (C) 2014 The Android Open Source Project
4 *
5 * Licensed under the Apache License, Version 2.0 (the "License");
6 * you may not use this file except in compliance with the License.
7 * You may obtain a copy of the License at
8 *
9 * http://www.apache.org/licenses/LICENSE-2.0
10 *
11 * Unless required by applicable law or agreed to in writing, software
12 * distributed under the License is distributed on an "AS IS" BASIS,
13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 * See the License for the specific language governing permissions and
15 * limitations under the License.
16 *
17 * Written by William Roberts <w.roberts@sta.samsung.com>
18 *
19 */
20
21#include <errno.h>
22#include <string.h>
23#include <unistd.h>
24
25#define LOG_TAG "libaudit"
26#include <log/log.h>
27
28#include "libaudit.h"
29
30/**
31 * Waits for an ack from the kernel
32 * @param fd
33 * The netlink socket fd
34 * @param seq
35 * The current sequence number were acking on
36 * @return
37 * This function returns 0 on success, else -errno.
38 */
39static int get_ack(int fd, int16_t seq)
40{
41 int rc;
42 struct audit_message rep;
43
44 /* Sanity check, this is an internal interface this shouldn't happen */
45 if (fd < 0) {
46 return -EINVAL;
47 }
48
49 rc = audit_get_reply(fd, &rep, GET_REPLY_BLOCKING, MSG_PEEK);
50 if (rc < 0) {
51 return rc;
52 }
53
54 if (rep.nlh.nlmsg_type == NLMSG_ERROR) {
55 audit_get_reply(fd, &rep, GET_REPLY_BLOCKING, 0);
56 rc = ((struct nlmsgerr *)rep.data)->error;
57 if (rc) {
58 return -rc;
59 }
60 }
61
62 if ((int16_t)rep.nlh.nlmsg_seq != seq) {
63 SLOGW("Expected sequence number between user space and kernel space is out of skew, "
64 "expected %u got %u", seq, rep.nlh.nlmsg_seq);
65 }
66
67 return 0;
68}
69
70/**
71 *
72 * @param fd
73 * The netlink socket fd
74 * @param type
75 * The type of netlink message
76 * @param data
77 * The data to send
78 * @param size
79 * The length of the data in bytes
80 * @return
81 * This function returns a positive sequence number on success, else -errno.
82 */
83static int audit_send(int fd, int type, const void *data, size_t size)
84{
85 int rc;
86 static int16_t sequence = 0;
87 struct audit_message req;
88 struct sockaddr_nl addr;
89
90 memset(&req, 0, sizeof(req));
91 memset(&addr, 0, sizeof(addr));
92
93 /* We always send netlink messaged */
94 addr.nl_family = AF_NETLINK;
95
96 /* Set up the netlink headers */
97 req.nlh.nlmsg_type = type;
98 req.nlh.nlmsg_len = NLMSG_SPACE(size);
99 req.nlh.nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK;
100
101 /*
102 * Check for a valid fd, even though sendto would catch this, its easier
103 * to always blindly increment the sequence number
104 */
105 if (fd < 0) {
106 return -EBADF;
107 }
108
109 /* Ensure the message is not too big */
110 if (NLMSG_SPACE(size) > MAX_AUDIT_MESSAGE_LENGTH) {
111 SLOGE("netlink message is too large");
112 return -EINVAL;
113 }
114
115 /* Only memcpy in the data if it was specified */
116 if (size && data) {
117 memcpy(NLMSG_DATA(&req.nlh), data, size);
118 }
119
120 /*
121 * Only increment the sequence number on a guarantee
122 * you will send it to the kernel.
123 *
124 * Also, the sequence is defined as a u32 in the kernel
125 * struct. Using an int here might not work on 32/64 bit splits. A
126 * signed 64 bit value can overflow a u32..but a u32
127 * might not fit in the response, so we need to use s32.
128 * Which is still kind of hackish since int could be 16 bits
129 * in size. The only safe type to use here is a signed 16
130 * bit value.
131 */
132 req.nlh.nlmsg_seq = ++sequence;
133
134 /* While failing and its due to interrupts */
135
136 rc = TEMP_FAILURE_RETRY(sendto(fd, &req, req.nlh.nlmsg_len, 0,
137 (struct sockaddr*) &addr, sizeof(addr)));
138
139 /* Not all the bytes were sent */
140 if (rc < 0) {
141 rc = -errno;
142 SLOGE("Error sending data over the netlink socket: %s", strerror(-errno));
143 goto out;
144 } else if ((uint32_t) rc != req.nlh.nlmsg_len) {
145 rc = -EPROTO;
146 goto out;
147 }
148
149 /* We sent all the bytes, get the ack */
150 rc = get_ack(fd, sequence);
151
152 /* If the ack failed, return the error, else return the sequence number */
153 rc = (rc == 0) ? (int) sequence : rc;
154
155out:
156 /* Don't let sequence roll to negative */
157 if (sequence < 0) {
158 SLOGW("Auditd to Kernel sequence number has rolled over");
159 sequence = 0;
160 }
161
162 return rc;
163}
164
Nick Kralevichc234a1b2014-11-19 13:33:22 -0800165int audit_setup(int fd, uint32_t pid)
William Roberts29d238d2013-02-08 09:45:26 +0900166{
167 int rc;
168 struct audit_message rep;
169 struct audit_status status;
170
171 memset(&status, 0, sizeof(status));
172
173 /*
174 * In order to set the auditd PID we send an audit message over the netlink
175 * socket with the pid field of the status struct set to our current pid,
176 * and the the mask set to AUDIT_STATUS_PID
177 */
178 status.pid = pid;
Nick Kralevichc234a1b2014-11-19 13:33:22 -0800179 status.mask = AUDIT_STATUS_PID | AUDIT_STATUS_RATE_LIMIT;
Nick Kralevich9667a662015-05-09 12:36:18 -0700180 status.rate_limit = 20; // audit entries per second
William Roberts29d238d2013-02-08 09:45:26 +0900181
182 /* Let the kernel know this pid will be registering for audit events */
183 rc = audit_send(fd, AUDIT_SET, &status, sizeof(status));
184 if (rc < 0) {
185 SLOGE("Could net set pid for audit events, error: %s", strerror(-rc));
186 return rc;
187 }
188
189 /*
190 * In a request where we need to wait for a response, wait for the message
191 * and discard it. This message confirms and sync's us with the kernel.
Nick Kralevichc234a1b2014-11-19 13:33:22 -0800192 * This daemon is now registered as the audit logger.
193 *
194 * TODO
195 * If the daemon dies and restarts the message didn't come back,
196 * so I went to non-blocking and it seemed to fix the bug.
197 * Need to investigate further.
William Roberts29d238d2013-02-08 09:45:26 +0900198 */
Nick Kralevichc234a1b2014-11-19 13:33:22 -0800199 audit_get_reply(fd, &rep, GET_REPLY_NONBLOCKING, 0);
William Roberts29d238d2013-02-08 09:45:26 +0900200
201 return 0;
202}
203
204int audit_open()
205{
Nick Kralevichc234a1b2014-11-19 13:33:22 -0800206 return socket(PF_NETLINK, SOCK_RAW | SOCK_CLOEXEC, NETLINK_AUDIT);
William Roberts29d238d2013-02-08 09:45:26 +0900207}
208
209int audit_get_reply(int fd, struct audit_message *rep, reply_t block, int peek)
210{
211 ssize_t len;
212 int flags;
213 int rc = 0;
214
215 struct sockaddr_nl nladdr;
216 socklen_t nladdrlen = sizeof(nladdr);
217
218 if (fd < 0) {
219 return -EBADF;
220 }
221
222 /* Set up the flags for recv from */
223 flags = (block == GET_REPLY_NONBLOCKING) ? MSG_DONTWAIT : 0;
224 flags |= peek;
225
226 /*
227 * Get the data from the netlink socket but on error we need to be carefull,
228 * the interface shows that EINTR can never be returned, other errors,
229 * however, can be returned.
230 */
231 len = TEMP_FAILURE_RETRY(recvfrom(fd, rep, sizeof(*rep), flags,
232 (struct sockaddr*) &nladdr, &nladdrlen));
233
234 /*
235 * EAGAIN should be re-tried until success or another error manifests.
236 */
237 if (len < 0) {
238 rc = -errno;
239 if (block == GET_REPLY_NONBLOCKING && rc == -EAGAIN) {
240 /* If request is non blocking and errno is EAGAIN, just return 0 */
241 return 0;
242 }
243 SLOGE("Error receiving from netlink socket, error: %s", strerror(-rc));
244 return rc;
245 }
246
247 if (nladdrlen != sizeof(nladdr)) {
248 SLOGE("Protocol fault, error: %s", strerror(EPROTO));
249 return -EPROTO;
250 }
251
252 /* Make sure the netlink message was not spoof'd */
253 if (nladdr.nl_pid) {
254 SLOGE("Invalid netlink pid received, expected 0 got: %d", nladdr.nl_pid);
255 return -EINVAL;
256 }
257
258 /* Check if the reply from the kernel was ok */
259 if (!NLMSG_OK(&rep->nlh, (size_t)len)) {
260 rc = (len == sizeof(*rep)) ? -EFBIG : -EBADE;
261 SLOGE("Bad kernel response %s", strerror(-rc));
262 }
263
264 return rc;
265}
266
267void audit_close(int fd)
268{
269 int rc = close(fd);
270 if (rc < 0) {
271 SLOGE("Attempting to close invalid fd %d, error: %s", fd, strerror(errno));
272 }
273 return;
274}