<?xml version="1.0" encoding="utf-8"?>
<!-- Copyright (C) 2012 The Android Open Source Project

     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
     You may obtain a copy of the License at

          http://www.apache.org/licenses/LICENSE-2.0

     Unless required by applicable law or agreed to in writing, software
     distributed under the License is distributed on an "AS IS" BASIS,
     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
     See the License for the specific language governing permissions and
     limitations under the License.
-->
<metadata xmlns="http://schemas.android.com/service/camera/metadata/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://schemas.android.com/service/camera/metadata/ metadata_properties.xsd">

  <tags>
    <tag id="BC">
        Needed for backwards compatibility with old Java API
    </tag>
    <tag id="V1">
        New features for first camera 2 release (API1)
    </tag>
    <tag id="RAW">
        Needed for useful RAW image processing and DNG file support
    </tag>
    <tag id="HAL2">
        Entry is only used by camera device legacy HAL 2.x
    </tag>
    <tag id="FULL">
        Entry is required for full hardware level devices, and optional for other hardware levels
    </tag>
    <tag id="DEPTH">
        Entry is required for the depth capability.
    </tag>
    <tag id="REPROC">
        Entry is required for the YUV or PRIVATE reprocessing capability.
    </tag>
    <tag id="LOGICALCAMERA">
        Entry is required for logical multi-camera capability.
    </tag>
    <tag id="FUTURE">
        Entry is  under-specified and is not required for now. This is for book-keeping purpose,
        do not implement or use it, it may be revised for future.
    </tag>
  </tags>

  <types>
    <typedef name="pairFloatFloat">
      <language name="java">android.util.Pair&lt;Float,Float&gt;</language>
    </typedef>
    <typedef name="pairDoubleDouble">
      <language name="java">android.util.Pair&lt;Double,Double&gt;</language>
    </typedef>
    <typedef name="rectangle">
      <language name="java">android.graphics.Rect</language>
    </typedef>
    <typedef name="size">
      <language name="java">android.util.Size</language>
    </typedef>
    <typedef name="string">
      <language name="java">String</language>
    </typedef>
    <typedef name="boolean">
      <language name="java">boolean</language>
    </typedef>
    <typedef name="imageFormat">
      <language name="java">int</language>
    </typedef>
    <typedef name="streamConfigurationMap">
      <language name="java">android.hardware.camera2.params.StreamConfigurationMap</language>
    </typedef>
    <typedef name="streamConfiguration">
      <language name="java">android.hardware.camera2.params.StreamConfiguration</language>
    </typedef>
    <typedef name="streamConfigurationDuration">
      <language name="java">android.hardware.camera2.params.StreamConfigurationDuration</language>
    </typedef>
    <typedef name="face">
      <language name="java">android.hardware.camera2.params.Face</language>
    </typedef>
    <typedef name="meteringRectangle">
      <language name="java">android.hardware.camera2.params.MeteringRectangle</language>
    </typedef>
    <typedef name="rangeFloat">
      <language name="java">android.util.Range&lt;Float&gt;</language>
    </typedef>
    <typedef name="rangeInt">
      <language name="java">android.util.Range&lt;Integer&gt;</language>
    </typedef>
    <typedef name="rangeLong">
      <language name="java">android.util.Range&lt;Long&gt;</language>
    </typedef>
    <typedef name="colorSpaceTransform">
      <language name="java">android.hardware.camera2.params.ColorSpaceTransform</language>
    </typedef>
    <typedef name="rggbChannelVector">
      <language name="java">android.hardware.camera2.params.RggbChannelVector</language>
    </typedef>
    <typedef name="blackLevelPattern">
      <language name="java">android.hardware.camera2.params.BlackLevelPattern</language>
    </typedef>
    <typedef name="enumList">
      <language name="java">int</language>
    </typedef>
    <typedef name="sizeF">
      <language name="java">android.util.SizeF</language>
    </typedef>
    <typedef name="point">
      <language name="java">android.graphics.Point</language>
    </typedef>
    <typedef name="tonemapCurve">
      <language name="java">android.hardware.camera2.params.TonemapCurve</language>
    </typedef>
    <typedef name="lensShadingMap">
      <language name="java">android.hardware.camera2.params.LensShadingMap</language>
    </typedef>
    <typedef name="location">
      <language name="java">android.location.Location</language>
    </typedef>
    <typedef name="highSpeedVideoConfiguration">
      <language name="java">android.hardware.camera2.params.HighSpeedVideoConfiguration</language>
    </typedef>
    <typedef name="reprocessFormatsMap">
      <language name="java">android.hardware.camera2.params.ReprocessFormatsMap</language>
    </typedef>
    <typedef name="oisSample">
      <language name="java">android.hardware.camera2.params.OisSample</language>
    </typedef>
  </types>

  <namespace name="android">
    <section name="colorCorrection">
      <controls>
        <entry name="mode" type="byte" visibility="public" enum="true" hwlevel="full">
          <enum>
            <value>TRANSFORM_MATRIX
              <notes>Use the android.colorCorrection.transform matrix
                and android.colorCorrection.gains to do color conversion.

                All advanced white balance adjustments (not specified
                by our white balance pipeline) must be disabled.

                If AWB is enabled with `android.control.awbMode != OFF`, then
                TRANSFORM_MATRIX is ignored. The camera device will override
                this value to either FAST or HIGH_QUALITY.
              </notes>
            </value>
            <value>FAST
              <notes>Color correction processing must not slow down
              capture rate relative to sensor raw output.

              Advanced white balance adjustments above and beyond
              the specified white balance pipeline may be applied.

              If AWB is enabled with `android.control.awbMode != OFF`, then
              the camera device uses the last frame's AWB values
              (or defaults if AWB has never been run).
            </notes>
            </value>
            <value>HIGH_QUALITY
              <notes>Color correction processing operates at improved
              quality but the capture rate might be reduced (relative to sensor
              raw output rate)

              Advanced white balance adjustments above and beyond
              the specified white balance pipeline may be applied.

              If AWB is enabled with `android.control.awbMode != OFF`, then
              the camera device uses the last frame's AWB values
              (or defaults if AWB has never been run).
            </notes>
            </value>
          </enum>

          <description>
          The mode control selects how the image data is converted from the
          sensor's native color into linear sRGB color.
          </description>
          <details>
          When auto-white balance (AWB) is enabled with android.control.awbMode, this
          control is overridden by the AWB routine. When AWB is disabled, the
          application controls how the color mapping is performed.

          We define the expected processing pipeline below. For consistency
          across devices, this is always the case with TRANSFORM_MATRIX.

          When either FULL or HIGH_QUALITY is used, the camera device may
          do additional processing but android.colorCorrection.gains and
          android.colorCorrection.transform will still be provided by the
          camera device (in the results) and be roughly correct.

          Switching to TRANSFORM_MATRIX and using the data provided from
          FAST or HIGH_QUALITY will yield a picture with the same white point
          as what was produced by the camera device in the earlier frame.

          The expected processing pipeline is as follows:

          ![White balance processing pipeline](android.colorCorrection.mode/processing_pipeline.png)

          The white balance is encoded by two values, a 4-channel white-balance
          gain vector (applied in the Bayer domain), and a 3x3 color transform
          matrix (applied after demosaic).

          The 4-channel white-balance gains are defined as:

              android.colorCorrection.gains = [ R G_even G_odd B ]

          where `G_even` is the gain for green pixels on even rows of the
          output, and `G_odd` is the gain for green pixels on the odd rows.
          These may be identical for a given camera device implementation; if
          the camera device does not support a separate gain for even/odd green
          channels, it will use the `G_even` value, and write `G_odd` equal to
          `G_even` in the output result metadata.

          The matrices for color transforms are defined as a 9-entry vector:

              android.colorCorrection.transform = [ I0 I1 I2 I3 I4 I5 I6 I7 I8 ]

          which define a transform from input sensor colors, `P_in = [ r g b ]`,
          to output linear sRGB, `P_out = [ r' g' b' ]`,

          with colors as follows:

              r' = I0r + I1g + I2b
              g' = I3r + I4g + I5b
              b' = I6r + I7g + I8b

          Both the input and output value ranges must match. Overflow/underflow
          values are clipped to fit within the range.
          </details>
          <hal_details>
          HAL must support both FAST and HIGH_QUALITY if color correction control is available
          on the camera device, but the underlying implementation can be the same for both modes.
          That is, if the highest quality implementation on the camera device does not slow down
          capture rate, then FAST and HIGH_QUALITY should generate the same output.
          </hal_details>
        </entry>
        <entry name="transform" type="rational" visibility="public"
               type_notes="3x3 rational matrix in row-major order"
               container="array" typedef="colorSpaceTransform" hwlevel="full">
          <array>
            <size>3</size>
            <size>3</size>
          </array>
          <description>A color transform matrix to use to transform
          from sensor RGB color space to output linear sRGB color space.
          </description>
          <units>Unitless scale factors</units>
          <details>This matrix is either set by the camera device when the request
          android.colorCorrection.mode is not TRANSFORM_MATRIX, or
          directly by the application in the request when the
          android.colorCorrection.mode is TRANSFORM_MATRIX.

          In the latter case, the camera device may round the matrix to account
          for precision issues; the final rounded matrix should be reported back
          in this matrix result metadata. The transform should keep the magnitude
          of the output color values within `[0, 1.0]` (assuming input color
          values is within the normalized range `[0, 1.0]`), or clipping may occur.

          The valid range of each matrix element varies on different devices, but
          values within [-1.5, 3.0] are guaranteed not to be clipped.
          </details>
        </entry>
        <entry name="gains" type="float" visibility="public"
               type_notes="A 1D array of floats for 4 color channel gains"
               container="array" typedef="rggbChannelVector" hwlevel="full">
          <array>
            <size>4</size>
          </array>
          <description>Gains applying to Bayer raw color channels for
          white-balance.</description>
          <units>Unitless gain factors</units>
          <details>
          These per-channel gains are either set by the camera device
          when the request android.colorCorrection.mode is not
          TRANSFORM_MATRIX, or directly by the application in the
          request when the android.colorCorrection.mode is
          TRANSFORM_MATRIX.

          The gains in the result metadata are the gains actually
          applied by the camera device to the current frame.

          The valid range of gains varies on different devices, but gains
          between [1.0, 3.0] are guaranteed not to be clipped. Even if a given
          device allows gains below 1.0, this is usually not recommended because
          this can create color artifacts.
          </details>
          <hal_details>
          The 4-channel white-balance gains are defined in
          the order of `[R G_even G_odd B]`, where `G_even` is the gain
          for green pixels on even rows of the output, and `G_odd`
          is the gain for green pixels on the odd rows.

          If a HAL does not support a separate gain for even/odd green
          channels, it must use the `G_even` value, and write
          `G_odd` equal to `G_even` in the output result metadata.
          </hal_details>
        </entry>
        <entry name="aberrationMode" type="byte" visibility="public" enum="true" hwlevel="legacy">
          <enum>
            <value>OFF
              <notes>
                No aberration correction is applied.
              </notes>
            </value>
            <value>FAST
              <notes>
                Aberration correction will not slow down capture rate
                relative to sensor raw output.
            </notes>
            </value>
            <value>HIGH_QUALITY
              <notes>
                Aberration correction operates at improved quality but the capture rate might be
                reduced (relative to sensor raw output rate)
            </notes>
            </value>
          </enum>
          <description>
            Mode of operation for the chromatic aberration correction algorithm.
          </description>
          <range>android.colorCorrection.availableAberrationModes</range>
          <details>
            Chromatic (color) aberration is caused by the fact that different wavelengths of light
            can not focus on the same point after exiting from the lens. This metadata defines
            the high level control of chromatic aberration correction algorithm, which aims to
            minimize the chromatic artifacts that may occur along the object boundaries in an
            image.

            FAST/HIGH_QUALITY both mean that camera device determined aberration
            correction will be applied. HIGH_QUALITY mode indicates that the camera device will
            use the highest-quality aberration correction algorithms, even if it slows down
            capture rate. FAST means the camera device will not slow down capture rate when
            applying aberration correction.

            LEGACY devices will always be in FAST mode.
          </details>
        </entry>
      </controls>
      <dynamic>
        <clone entry="android.colorCorrection.mode" kind="controls">
        </clone>
        <clone entry="android.colorCorrection.transform" kind="controls">
        </clone>
        <clone entry="android.colorCorrection.gains" kind="controls">
        </clone>
        <clone entry="android.colorCorrection.aberrationMode" kind="controls">
        </clone>
      </dynamic>
      <static>
        <entry name="availableAberrationModes" type="byte" visibility="public"
        type_notes="list of enums" container="array" typedef="enumList" hwlevel="legacy">
          <array>
            <size>n</size>
          </array>
          <description>
            List of aberration correction modes for android.colorCorrection.aberrationMode that are
            supported by this camera device.
          </description>
          <range>Any value listed in android.colorCorrection.aberrationMode</range>
          <details>
            This key lists the valid modes for android.colorCorrection.aberrationMode.  If no
            aberration correction modes are available for a device, this list will solely include
            OFF mode. All camera devices will support either OFF or FAST mode.

            Camera devices that support the MANUAL_POST_PROCESSING capability will always list
            OFF mode. This includes all FULL level devices.

            LEGACY devices will always only support FAST mode.
          </details>
          <hal_details>
            HAL must support both FAST and HIGH_QUALITY if chromatic aberration control is available
            on the camera device, but the underlying implementation can be the same for both modes.
            That is, if the highest quality implementation on the camera device does not slow down
            capture rate, then FAST and HIGH_QUALITY will generate the same output.
          </hal_details>
          <tag id="V1" />
        </entry>
      </static>
    </section>
    <section name="control">
      <controls>
        <entry name="aeAntibandingMode" type="byte" visibility="public"
               enum="true" hwlevel="legacy">
          <enum>
            <value>OFF
              <notes>
                The camera device will not adjust exposure duration to
                avoid banding problems.
              </notes>
            </value>
            <value>50HZ
              <notes>
                The camera device will adjust exposure duration to
                avoid banding problems with 50Hz illumination sources.
              </notes>
            </value>
            <value>60HZ
              <notes>
                The camera device will adjust exposure duration to
                avoid banding problems with 60Hz illumination
                sources.
              </notes>
            </value>
            <value>AUTO
              <notes>
                The camera device will automatically adapt its
                antibanding routine to the current illumination
                condition. This is the default mode if AUTO is
                available on given camera device.
              </notes>
            </value>
          </enum>
          <description>
            The desired setting for the camera device's auto-exposure
            algorithm's antibanding compensation.
          </description>
          <range>
            android.control.aeAvailableAntibandingModes
          </range>
          <details>
            Some kinds of lighting fixtures, such as some fluorescent
            lights, flicker at the rate of the power supply frequency
            (60Hz or 50Hz, depending on country). While this is
            typically not noticeable to a person, it can be visible to
            a camera device. If a camera sets its exposure time to the
            wrong value, the flicker may become visible in the
            viewfinder as flicker or in a final captured image, as a
            set of variable-brightness bands across the image.

            Therefore, the auto-exposure routines of camera devices
            include antibanding routines that ensure that the chosen
            exposure value will not cause such banding. The choice of
            exposure time depends on the rate of flicker, which the
            camera device can detect automatically, or the expected
            rate can be selected by the application using this
            control.

            A given camera device may not support all of the possible
            options for the antibanding mode. The
            android.control.aeAvailableAntibandingModes key contains
            the available modes for a given camera device.

            AUTO mode is the default if it is available on given
            camera device. When AUTO mode is not available, the
            default will be either 50HZ or 60HZ, and both 50HZ
            and 60HZ will be available.

            If manual exposure control is enabled (by setting
            android.control.aeMode or android.control.mode to OFF),
            then this setting has no effect, and the application must
            ensure it selects exposure times that do not cause banding
            issues. The android.statistics.sceneFlicker key can assist
            the application in this.
          </details>
          <hal_details>
            For all capture request templates, this field must be set
            to AUTO if AUTO mode is available. If AUTO is not available,
            the default must be either 50HZ or 60HZ, and both 50HZ and
            60HZ must be available.

            If manual exposure control is enabled (by setting
            android.control.aeMode or android.control.mode to OFF),
            then the exposure values provided by the application must not be
            adjusted for antibanding.
          </hal_details>
          <tag id="BC" />
        </entry>
        <entry name="aeExposureCompensation" type="int32" visibility="public" hwlevel="legacy">
          <description>Adjustment to auto-exposure (AE) target image
          brightness.</description>
          <units>Compensation steps</units>
          <range>android.control.aeCompensationRange</range>
          <details>
          The adjustment is measured as a count of steps, with the
          step size defined by android.control.aeCompensationStep and the
          allowed range by android.control.aeCompensationRange.

          For example, if the exposure value (EV) step is 0.333, '6'
          will mean an exposure compensation of +2 EV; -3 will mean an
          exposure compensation of -1 EV. One EV represents a doubling
          of image brightness. Note that this control will only be
          effective if android.control.aeMode `!=` OFF. This control
          will take effect even when android.control.aeLock `== true`.

          In the event of exposure compensation value being changed, camera device
          may take several frames to reach the newly requested exposure target.
          During that time, android.control.aeState field will be in the SEARCHING
          state. Once the new exposure target is reached, android.control.aeState will
          change from SEARCHING to either CONVERGED, LOCKED (if AE lock is enabled), or
          FLASH_REQUIRED (if the scene is too dark for still capture).
          </details>
          <tag id="BC" />
        </entry>
        <entry name="aeLock" type="byte" visibility="public" enum="true"
               typedef="boolean" hwlevel="legacy">
          <enum>
            <value>OFF
            <notes>Auto-exposure lock is disabled; the AE algorithm
            is free to update its parameters.</notes></value>
            <value>ON
            <notes>Auto-exposure lock is enabled; the AE algorithm
            must not update the exposure and sensitivity parameters
            while the lock is active.

            android.control.aeExposureCompensation setting changes
            will still take effect while auto-exposure is locked.

            Some rare LEGACY devices may not support
            this, in which case the value will always be overridden to OFF.
            </notes></value>
          </enum>
          <description>Whether auto-exposure (AE) is currently locked to its latest
          calculated values.</description>
          <details>
          When set to `true` (ON), the AE algorithm is locked to its latest parameters,
          and will not change exposure settings until the lock is set to `false` (OFF).

          Note that even when AE is locked, the flash may be fired if
          the android.control.aeMode is ON_AUTO_FLASH /
          ON_ALWAYS_FLASH / ON_AUTO_FLASH_REDEYE.

          When android.control.aeExposureCompensation is changed, even if the AE lock
          is ON, the camera device will still adjust its exposure value.

          If AE precapture is triggered (see android.control.aePrecaptureTrigger)
          when AE is already locked, the camera device will not change the exposure time
          (android.sensor.exposureTime) and sensitivity (android.sensor.sensitivity)
          parameters. The flash may be fired if the android.control.aeMode
          is ON_AUTO_FLASH/ON_AUTO_FLASH_REDEYE and the scene is too dark. If the
          android.control.aeMode is ON_ALWAYS_FLASH, the scene may become overexposed.
          Similarly, AE precapture trigger CANCEL has no effect when AE is already locked.

          When an AE precapture sequence is triggered, AE unlock will not be able to unlock
          the AE if AE is locked by the camera device internally during precapture metering
          sequence In other words, submitting requests with AE unlock has no effect for an
          ongoing precapture metering sequence. Otherwise, the precapture metering sequence
          will never succeed in a sequence of preview requests where AE lock is always set
          to `false`.

          Since the camera device has a pipeline of in-flight requests, the settings that
          get locked do not necessarily correspond to the settings that were present in the
          latest capture result received from the camera device, since additional captures
          and AE updates may have occurred even before the result was sent out. If an
          application is switching between automatic and manual control and wishes to eliminate
          any flicker during the switch, the following procedure is recommended:

            1. Starting in auto-AE mode:
            2. Lock AE
            3. Wait for the first result to be output that has the AE locked
            4. Copy exposure settings from that result into a request, set the request to manual AE
            5. Submit the capture request, proceed to run manual AE as desired.

          See android.control.aeState for AE lock related state transition details.
          </details>
          <tag id="BC" />
        </entry>
        <entry name="aeMode" type="byte" visibility="public" enum="true" hwlevel="legacy">
          <enum>
            <value>OFF
              <notes>
                The camera device's autoexposure routine is disabled.

                The application-selected android.sensor.exposureTime,
                android.sensor.sensitivity and
                android.sensor.frameDuration are used by the camera
                device, along with android.flash.* fields, if there's
                a flash unit for this camera device.

                Note that auto-white balance (AWB) and auto-focus (AF)
                behavior is device dependent when AE is in OFF mode.
                To have consistent behavior across different devices,
                it is recommended to either set AWB and AF to OFF mode
                or lock AWB and AF before setting AE to OFF.
                See android.control.awbMode, android.control.afMode,
                android.control.awbLock, and android.control.afTrigger
                for more details.

                LEGACY devices do not support the OFF mode and will
                override attempts to use this value to ON.
              </notes>
            </value>
            <value>ON
              <notes>
                The camera device's autoexposure routine is active,
                with no flash control.

                The application's values for
                android.sensor.exposureTime,
                android.sensor.sensitivity, and
                android.sensor.frameDuration are ignored. The
                application has control over the various
                android.flash.* fields.
              </notes>
            </value>
            <value>ON_AUTO_FLASH
              <notes>
                Like ON, except that the camera device also controls
                the camera's flash unit, firing it in low-light
                conditions.

                The flash may be fired during a precapture sequence
                (triggered by android.control.aePrecaptureTrigger) and
                may be fired for captures for which the
                android.control.captureIntent field is set to
                STILL_CAPTURE
              </notes>
            </value>
            <value>ON_ALWAYS_FLASH
              <notes>
                Like ON, except that the camera device also controls
                the camera's flash unit, always firing it for still
                captures.

                The flash may be fired during a precapture sequence
                (triggered by android.control.aePrecaptureTrigger) and
                will always be fired for captures for which the
                android.control.captureIntent field is set to
                STILL_CAPTURE
              </notes>
            </value>
            <value>ON_AUTO_FLASH_REDEYE
              <notes>
                Like ON_AUTO_FLASH, but with automatic red eye
                reduction.

                If deemed necessary by the camera device, a red eye
                reduction flash will fire during the precapture
                sequence.
              </notes>
            </value>
            <value hal_version="3.3">ON_EXTERNAL_FLASH
              <notes>
                An external flash has been turned on.

                It informs the camera device that an external flash has been turned on, and that
                metering (and continuous focus if active) should be quickly recaculated to account
                for the external flash. Otherwise, this mode acts like ON.

                When the external flash is turned off, AE mode should be changed to one of the
                other available AE modes.

                If the camera device supports AE external flash mode, android.control.aeState must
                be FLASH_REQUIRED after the camera device finishes AE scan and it's too dark without
                flash.
              </notes>
            </value>
          </enum>
          <description>The desired mode for the camera device's
          auto-exposure routine.</description>
          <range>android.control.aeAvailableModes</range>
          <details>
            This control is only effective if android.control.mode is
            AUTO.

            When set to any of the ON modes, the camera device's
            auto-exposure routine is enabled, overriding the
            application's selected exposure time, sensor sensitivity,
            and frame duration (android.sensor.exposureTime,
            android.sensor.sensitivity, and
            android.sensor.frameDuration). If one of the FLASH modes
            is selected, the camera device's flash unit controls are
            also overridden.

            The FLASH modes are only available if the camera device
            has a flash unit (android.flash.info.available is `true`).

            If flash TORCH mode is desired, this field must be set to
            ON or OFF, and android.flash.mode set to TORCH.

            When set to any of the ON modes, the values chosen by the
            camera device auto-exposure routine for the overridden
            fields for a given capture will be available in its
            CaptureResult.
          </details>
          <tag id="BC" />
        </entry>
        <entry name="aeRegions" type="int32" visibility="public"
            optional="true" container="array" typedef="meteringRectangle">
          <array>
            <size>5</size>
            <size>area_count</size>
          </array>
          <description>List of metering areas to use for auto-exposure adjustment.</description>
          <units>Pixel coordinates within android.sensor.info.activeArraySize</units>
          <range>Coordinates must be between `[(0,0), (width, height))` of
          android.sensor.info.activeArraySize</range>
          <details>
              Not available if android.control.maxRegionsAe is 0.
              Otherwise will always be present.

              The maximum number of regions supported by the device is determined by the value
              of android.control.maxRegionsAe.

              The coordinate system is based on the active pixel array,
              with (0,0) being the top-left pixel in the active pixel array, and
              (android.sensor.info.activeArraySize.width - 1,
              android.sensor.info.activeArraySize.height - 1) being the
              bottom-right pixel in the active pixel array.

              The weight must be within `[0, 1000]`, and represents a weight
              for every pixel in the area. This means that a large metering area
              with the same weight as a smaller area will have more effect in
              the metering result. Metering areas can partially overlap and the
              camera device will add the weights in the overlap region.

              The weights are relative to weights of other exposure metering regions, so if only one
              region is used, all non-zero weights will have the same effect. A region with 0
              weight is ignored.

              If all regions have 0 weight, then no specific metering area needs to be used by the
              camera device.

              If the metering region is outside the used android.scaler.cropRegion returned in
              capture result metadata, the camera device will ignore the sections outside the crop
              region and output only the intersection rectangle as the metering region in the result
              metadata.  If the region is entirely outside the crop region, it will be ignored and
              not reported in the result metadata.
          </details>
          <ndk_details>
              The data representation is `int[5 * area_count]`.
              Every five elements represent a metering region of `(xmin, ymin, xmax, ymax, weight)`.
              The rectangle is defined to be inclusive on xmin and ymin, but exclusive on xmax and
              ymax.
          </ndk_details>
          <hal_details>
              The HAL level representation of MeteringRectangle[] is a
              int[5 * area_count].
              Every five elements represent a metering region of
              (xmin, ymin, xmax, ymax, weight).
              The rectangle is defined to be inclusive on xmin and ymin, but
              exclusive on xmax and ymax.
          </hal_details>
          <tag id="BC" />
        </entry>
        <entry name="aeTargetFpsRange" type="int32" visibility="public"
               container="array" typedef="rangeInt" hwlevel="legacy">
          <array>
            <size>2</size>
          </array>
          <description>Range over which the auto-exposure routine can
          adjust the capture frame rate to maintain good
          exposure.</description>
          <units>Frames per second (FPS)</units>
          <range>Any of the entries in android.control.aeAvailableTargetFpsRanges</range>
          <details>Only constrains auto-exposure (AE) algorithm, not
          manual control of android.sensor.exposureTime and
          android.sensor.frameDuration.</details>
          <tag id="BC" />
        </entry>
        <entry name="aePrecaptureTrigger" type="byte" visibility="public"
               enum="true" hwlevel="limited">
          <enum>
            <value>IDLE
              <notes>The trigger is idle.</notes>
            </value>
            <value>START
              <notes>The precapture metering sequence will be started
              by the camera device.

              The exact effect of the precapture trigger depends on
              the current AE mode and state.</notes>
            </value>
            <value>CANCEL
              <notes>The camera device will cancel any currently active or completed
              precapture metering sequence, the auto-exposure routine will return to its
              initial state.</notes>
            </value>
          </enum>
          <description>Whether the camera device will trigger a precapture
          metering sequence when it processes this request.</description>
          <details>This entry is normally set to IDLE, or is not
          included at all in the request settings. When included and
          set to START, the camera device will trigger the auto-exposure (AE)
          precapture metering sequence.

          When set to CANCEL, the camera device will cancel any active
          precapture metering trigger, and return to its initial AE state.
          If a precapture metering sequence is already completed, and the camera
          device has implicitly locked the AE for subsequent still capture, the
          CANCEL trigger will unlock the AE and return to its initial AE state.

          The precapture sequence should be triggered before starting a
          high-quality still capture for final metering decisions to
          be made, and for firing pre-capture flash pulses to estimate
          scene brightness and required final capture flash power, when
          the flash is enabled.

          Normally, this entry should be set to START for only a
          single request, and the application should wait until the
          sequence completes before starting a new one.

          When a precapture metering sequence is finished, the camera device
          may lock the auto-exposure routine internally to be able to accurately expose the
          subsequent still capture image (`android.control.captureIntent == STILL_CAPTURE`).
          For this case, the AE may not resume normal scan if no subsequent still capture is
          submitted. To ensure that the AE routine restarts normal scan, the application should
          submit a request with `android.control.aeLock == true`, followed by a request
          with `android.control.aeLock == false`, if the application decides not to submit a
          still capture request after the precapture sequence completes. Alternatively, for
          API level 23 or newer devices, the CANCEL can be used to unlock the camera device
          internally locked AE if the application doesn't submit a still capture request after
          the AE precapture trigger. Note that, the CANCEL was added in API level 23, and must not
          be used in devices that have earlier API levels.

          The exact effect of auto-exposure (AE) precapture trigger
          depends on the current AE mode and state; see
          android.control.aeState for AE precapture state transition
          details.

          On LEGACY-level devices, the precapture trigger is not supported;
          capturing a high-resolution JPEG image will automatically trigger a
          precapture sequence before the high-resolution capture, including
          potentially firing a pre-capture flash.

          Using the precapture trigger and the auto-focus trigger android.control.afTrigger
          simultaneously is allowed. However, since these triggers often require cooperation between
          the auto-focus and auto-exposure routines (for example, the may need to be enabled for a
          focus sweep), the camera device may delay acting on a later trigger until the previous
          trigger has been fully handled. This may lead to longer intervals between the trigger and
          changes to android.control.aeState indicating the start of the precapture sequence, for
          example.

          If both the precapture and the auto-focus trigger are activated on the same request, then
          the camera device will complete them in the optimal order for that device.
          </details>
          <hal_details>
          The HAL must support triggering the AE precapture trigger while an AF trigger is active
          (and vice versa), or at the same time as the AF trigger.  It is acceptable for the HAL to
          treat these as two consecutive triggers, for example handling the AF trigger and then the
          AE trigger.  Or the HAL may choose to optimize the case with both triggers fired at once,
          to minimize the latency for converging both focus and exposure/flash usage.
          </hal_details>
          <tag id="BC" />
        </entry>
        <entry name="afMode" type="byte" visibility="public" enum="true"
               hwlevel="legacy">
          <enum>
            <value>OFF
            <notes>The auto-focus routine does not control the lens;
            android.lens.focusDistance is controlled by the
            application.</notes></value>
            <value>AUTO
            <notes>Basic automatic focus mode.

            In this mode, the lens does not move unless
            the autofocus trigger action is called. When that trigger
            is activated, AF will transition to ACTIVE_SCAN, then to
            the outcome of the scan (FOCUSED or NOT_FOCUSED).

            Always supported if lens is not fixed focus.

            Use android.lens.info.minimumFocusDistance to determine if lens
            is fixed-focus.

            Triggering AF_CANCEL resets the lens position to default,
            and sets the AF state to INACTIVE.</notes></value>
            <value>MACRO
            <notes>Close-up focusing mode.

            In this mode, the lens does not move unless the
            autofocus trigger action is called. When that trigger is
            activated, AF will transition to ACTIVE_SCAN, then to
            the outcome of the scan (FOCUSED or NOT_FOCUSED). This
            mode is optimized for focusing on objects very close to
            the camera.

            When that trigger is activated, AF will transition to
            ACTIVE_SCAN, then to the outcome of the scan (FOCUSED or
            NOT_FOCUSED). Triggering cancel AF resets the lens
            position to default, and sets the AF state to
            INACTIVE.</notes></value>
            <value>CONTINUOUS_VIDEO
            <notes>In this mode, the AF algorithm modifies the lens
            position continually to attempt to provide a
            constantly-in-focus image stream.

            The focusing behavior should be suitable for good quality
            video recording; typically this means slower focus
            movement and no overshoots. When the AF trigger is not
            involved, the AF algorithm should start in INACTIVE state,
            and then transition into PASSIVE_SCAN and PASSIVE_FOCUSED
            states as appropriate. When the AF trigger is activated,
            the algorithm should immediately transition into
            AF_FOCUSED or AF_NOT_FOCUSED as appropriate, and lock the
            lens position until a cancel AF trigger is received.

            Once cancel is received, the algorithm should transition
            back to INACTIVE and resume passive scan. Note that this
            behavior is not identical to CONTINUOUS_PICTURE, since an
            ongoing PASSIVE_SCAN must immediately be
            canceled.</notes></value>
            <value>CONTINUOUS_PICTURE
            <notes>In this mode, the AF algorithm modifies the lens
            position continually to attempt to provide a
            constantly-in-focus image stream.

            The focusing behavior should be suitable for still image
            capture; typically this means focusing as fast as
            possible. When the AF trigger is not involved, the AF
            algorithm should start in INACTIVE state, and then
            transition into PASSIVE_SCAN and PASSIVE_FOCUSED states as
            appropriate as it attempts to maintain focus. When the AF
            trigger is activated, the algorithm should finish its
            PASSIVE_SCAN if active, and then transition into
            AF_FOCUSED or AF_NOT_FOCUSED as appropriate, and lock the
            lens position until a cancel AF trigger is received.

            When the AF cancel trigger is activated, the algorithm
            should transition back to INACTIVE and then act as if it
            has just been started.</notes></value>
            <value>EDOF
            <notes>Extended depth of field (digital focus) mode.

            The camera device will produce images with an extended
            depth of field automatically; no special focusing
            operations need to be done before taking a picture.

            AF triggers are ignored, and the AF state will always be
            INACTIVE.</notes></value>
          </enum>
          <description>Whether auto-focus (AF) is currently enabled, and what
          mode it is set to.</description>
          <range>android.control.afAvailableModes</range>
          <details>Only effective if android.control.mode = AUTO and the lens is not fixed focus
          (i.e. `android.lens.info.minimumFocusDistance &gt; 0`). Also note that
          when android.control.aeMode is OFF, the behavior of AF is device
          dependent. It is recommended to lock AF by using android.control.afTrigger before
          setting android.control.aeMode to OFF, or set AF mode to OFF when AE is OFF.

          If the lens is controlled by the camera device auto-focus algorithm,
          the camera device will report the current AF status in android.control.afState
          in result metadata.</details>
          <hal_details>
          When afMode is AUTO or MACRO, the lens must not move until an AF trigger is sent in a
          request (android.control.afTrigger `==` START). After an AF trigger, the afState will end
          up with either FOCUSED_LOCKED or NOT_FOCUSED_LOCKED state (see
          android.control.afState for detailed state transitions), which indicates that the lens is
          locked and will not move. If camera movement (e.g. tilting camera) causes the lens to move
          after the lens is locked, the HAL must compensate this movement appropriately such that
          the same focal plane remains in focus.

          When afMode is one of the continuous auto focus modes, the HAL is free to start a AF
          scan whenever it's not locked. When the lens is locked after an AF trigger
          (see android.control.afState for detailed state transitions), the HAL should maintain the
          same lock behavior as above.

          When afMode is OFF, the application controls focus manually. The accuracy of the
          focus distance control depends on the android.lens.info.focusDistanceCalibration.
          However, the lens must not move regardless of the camera movement for any focus distance
          manual control.

          To put this in concrete terms, if the camera has lens elements which may move based on
          camera orientation or motion (e.g. due to gravity), then the HAL must drive the lens to
          remain in a fixed position invariant to the camera's orientation or motion, for example,
          by using accelerometer measurements in the lens control logic. This is a typical issue
          that will arise on camera modules with open-loop VCMs.
          </hal_details>
          <tag id="BC" />
        </entry>
        <entry name="afRegions" type="int32" visibility="public"
               optional="true" container="array" typedef="meteringRectangle">
          <array>
            <size>5</size>
            <size>area_count</size>
          </array>
          <description>List of metering areas to use for auto-focus.</description>
          <units>Pixel coordinates within android.sensor.info.activeArraySize</units>
          <range>Coordinates must be between `[(0,0), (width, height))` of
          android.sensor.info.activeArraySize</range>
          <details>
              Not available if android.control.maxRegionsAf is 0.
              Otherwise will always be present.

              The maximum number of focus areas supported by the device is determined by the value
              of android.control.maxRegionsAf.

              The coordinate system is based on the active pixel array,
              with (0,0) being the top-left pixel in the active pixel array, and
              (android.sensor.info.activeArraySize.width - 1,
              android.sensor.info.activeArraySize.height - 1) being the
              bottom-right pixel in the active pixel array.

              The weight must be within `[0, 1000]`, and represents a weight
              for every pixel in the area. This means that a large metering area
              with the same weight as a smaller area will have more effect in
              the metering result. Metering areas can partially overlap and the
              camera device will add the weights in the overlap region.

              The weights are relative to weights of other metering regions, so if only one region
              is used, all non-zero weights will have the same effect. A region with 0 weight is
              ignored.

              If all regions have 0 weight, then no specific metering area needs to be used by the
              camera device. The capture result will either be a zero weight region as well, or
              the region selected by the camera device as the focus area of interest.

              If the metering region is outside the used android.scaler.cropRegion returned in
              capture result metadata, the camera device will ignore the sections outside the crop
              region and output only the intersection rectangle as the metering region in the result
              metadata. If the region is entirely outside the crop region, it will be ignored and
              not reported in the result metadata.
          </details>
          <ndk_details>
              The data representation is `int[5 * area_count]`.
              Every five elements represent a metering region of `(xmin, ymin, xmax, ymax, weight)`.
              The rectangle is defined to be inclusive on xmin and ymin, but exclusive on xmax and
              ymax.
          </ndk_details>
          <hal_details>
              The HAL level representation of MeteringRectangle[] is a
              int[5 * area_count].
              Every five elements represent a metering region of
              (xmin, ymin, xmax, ymax, weight).
              The rectangle is defined to be inclusive on xmin and ymin, but
              exclusive on xmax and ymax.
          </hal_details>
          <tag id="BC" />
        </entry>
        <entry name="afTrigger" type="byte" visibility="public" enum="true"
               hwlevel="legacy">
          <enum>
            <value>IDLE
              <notes>The trigger is idle.</notes>
            </value>
            <value>START
              <notes>Autofocus will trigger now.</notes>
            </value>
            <value>CANCEL
              <notes>Autofocus will return to its initial
              state, and cancel any currently active trigger.</notes>
            </value>
          </enum>
          <description>
          Whether the camera device will trigger autofocus for this request.
          </description>
          <details>This entry is normally set to IDLE, or is not
          included at all in the request settings.

          When included and set to START, the camera device will trigger the
          autofocus algorithm. If autofocus is disabled, this trigger has no effect.

          When set to CANCEL, the camera device will cancel any active trigger,
          and return to its initial AF state.

          Generally, applications should set this entry to START or CANCEL for only a
          single capture, and then return it to IDLE (or not set at all). Specifying
          START for multiple captures in a row means restarting the AF operation over
          and over again.

          See android.control.afState for what the trigger means for each AF mode.

          Using the autofocus trigger and the precapture trigger android.control.aePrecaptureTrigger
          simultaneously is allowed. However, since these triggers often require cooperation between
          the auto-focus and auto-exposure routines (for example, the may need to be enabled for a
          focus sweep), the camera device may delay acting on a later trigger until the previous
          trigger has been fully handled. This may lead to longer intervals between the trigger and
          changes to android.control.afState, for example.
          </details>
          <hal_details>
          The HAL must support triggering the AF trigger while an AE precapture trigger is active
          (and vice versa), or at the same time as the AE trigger.  It is acceptable for the HAL to
          treat these as two consecutive triggers, for example handling the AF trigger and then the
          AE trigger.  Or the HAL may choose to optimize the case with both triggers fired at once,
          to minimize the latency for converging both focus and exposure/flash usage.
          </hal_details>
          <tag id="BC" />
        </entry>
        <entry name="awbLock" type="byte" visibility="public" enum="true"
               typedef="boolean" hwlevel="legacy">
          <enum>
            <value>OFF
            <notes>Auto-white balance lock is disabled; the AWB
            algorithm is free to update its parameters if in AUTO
            mode.</notes></value>
            <value>ON
            <notes>Auto-white balance lock is enabled; the AWB
            algorithm will not update its parameters while the lock
            is active.</notes></value>
          </enum>
          <description>Whether auto-white balance (AWB) is currently locked to its
          latest calculated values.</description>
          <details>
          When set to `true` (ON), the AWB algorithm is locked to its latest parameters,
          and will not change color balance settings until the lock is set to `false` (OFF).

          Since the camera device has a pipeline of in-flight requests, the settings that
          get locked do not necessarily correspond to the settings that were present in the
          latest capture result received from the camera device, since additional captures
          and AWB updates may have occurred even before the result was sent out. If an
          application is switching between automatic and manual control and wishes to eliminate
          any flicker during the switch, the following procedure is recommended:

            1. Starting in auto-AWB mode:
            2. Lock AWB
            3. Wait for the first result to be output that has the AWB locked
            4. Copy AWB settings from that result into a request, set the request to manual AWB
            5. Submit the capture request, proceed to run manual AWB as desired.

          Note that AWB lock is only meaningful when
          android.control.awbMode is in the AUTO mode; in other modes,
          AWB is already fixed to a specific setting.

          Some LEGACY devices may not support ON; the value is then overridden to OFF.
          </details>
          <tag id="BC" />
        </entry>
        <entry name="awbMode" type="byte" visibility="public" enum="true"
               hwlevel="legacy">
          <enum>
            <value>OFF
            <notes>
            The camera device's auto-white balance routine is disabled.

            The application-selected color transform matrix
            (android.colorCorrection.transform) and gains
            (android.colorCorrection.gains) are used by the camera
            device for manual white balance control.
            </notes>
            </value>
            <value>AUTO
            <notes>
            The camera device's auto-white balance routine is active.

            The application's values for android.colorCorrection.transform
            and android.colorCorrection.gains are ignored.
            For devices that support the MANUAL_POST_PROCESSING capability, the
            values used by the camera device for the transform and gains
            will be available in the capture result for this request.
            </notes>
            </value>
            <value>INCANDESCENT
            <notes>
            The camera device's auto-white balance routine is disabled;
            the camera device uses incandescent light as the assumed scene
            illumination for white balance.

            While the exact white balance transforms are up to the
            camera device, they will approximately match the CIE
            standard illuminant A.

            The application's values for android.colorCorrection.transform
            and android.colorCorrection.gains are ignored.
            For devices that support the MANUAL_POST_PROCESSING capability, the
            values used by the camera device for the transform and gains
            will be available in the capture result for this request.
            </notes>
            </value>
            <value>FLUORESCENT
            <notes>
            The camera device's auto-white balance routine is disabled;
            the camera device uses fluorescent light as the assumed scene
            illumination for white balance.

            While the exact white balance transforms are up to the
            camera device, they will approximately match the CIE
            standard illuminant F2.

            The application's values for android.colorCorrection.transform
            and android.colorCorrection.gains are ignored.
            For devices that support the MANUAL_POST_PROCESSING capability, the
            values used by the camera device for the transform and gains
            will be available in the capture result for this request.
            </notes>
            </value>
            <value>WARM_FLUORESCENT
            <notes>
            The camera device's auto-white balance routine is disabled;
            the camera device uses warm fluorescent light as the assumed scene
            illumination for white balance.

            While the exact white balance transforms are up to the
            camera device, they will approximately match the CIE
            standard illuminant F4.

            The application's values for android.colorCorrection.transform
            and android.colorCorrection.gains are ignored.
            For devices that support the MANUAL_POST_PROCESSING capability, the
            values used by the camera device for the transform and gains
            will be available in the capture result for this request.
            </notes>
            </value>
            <value>DAYLIGHT
            <notes>
            The camera device's auto-white balance routine is disabled;
            the camera device uses daylight light as the assumed scene
            illumination for white balance.

            While the exact white balance transforms are up to the
            camera device, they will approximately match the CIE
            standard illuminant D65.

            The application's values for android.colorCorrection.transform
            and android.colorCorrection.gains are ignored.
            For devices that support the MANUAL_POST_PROCESSING capability, the
            values used by the camera device for the transform and gains
            will be available in the capture result for this request.
            </notes>
            </value>
            <value>CLOUDY_DAYLIGHT
            <notes>
            The camera device's auto-white balance routine is disabled;
            the camera device uses cloudy daylight light as the assumed scene
            illumination for white balance.

            The application's values for android.colorCorrection.transform
            and android.colorCorrection.gains are ignored.
            For devices that support the MANUAL_POST_PROCESSING capability, the
            values used by the camera device for the transform and gains
            will be available in the capture result for this request.
            </notes>
            </value>
            <value>TWILIGHT
            <notes>
            The camera device's auto-white balance routine is disabled;
            the camera device uses twilight light as the assumed scene
            illumination for white balance.

            The application's values for android.colorCorrection.transform
            and android.colorCorrection.gains are ignored.
            For devices that support the MANUAL_POST_PROCESSING capability, the
            values used by the camera device for the transform and gains
            will be available in the capture result for this request.
            </notes>
            </value>
            <value>SHADE
            <notes>
            The camera device's auto-white balance routine is disabled;
            the camera device uses shade light as the assumed scene
            illumination for white balance.

            The application's values for android.colorCorrection.transform
            and android.colorCorrection.gains are ignored.
            For devices that support the MANUAL_POST_PROCESSING capability, the
            values used by the camera device for the transform and gains
            will be available in the capture result for this request.
            </notes>
            </value>
          </enum>
          <description>Whether auto-white balance (AWB) is currently setting the color
          transform fields, and what its illumination target
          is.</description>
          <range>android.control.awbAvailableModes</range>
          <details>
          This control is only effective if android.control.mode is AUTO.

          When set to the ON mode, the camera device's auto-white balance
          routine is enabled, overriding the application's selected
          android.colorCorrection.transform, android.colorCorrection.gains and
          android.colorCorrection.mode. Note that when android.control.aeMode
          is OFF, the behavior of AWB is device dependent. It is recommened to
          also set AWB mode to OFF or lock AWB by using android.control.awbLock before
          setting AE mode to OFF.

          When set to the OFF mode, the camera device's auto-white balance
          routine is disabled. The application manually controls the white
          balance by android.colorCorrection.transform, android.colorCorrection.gains
          and android.colorCorrection.mode.

          When set to any other modes, the camera device's auto-white
          balance routine is disabled. The camera device uses each
          particular illumination target for white balance
          adjustment. The application's values for
          android.colorCorrection.transform,
          android.colorCorrection.gains and
          android.colorCorrection.mode are ignored.
          </details>
          <tag id="BC" />
        </entry>
        <entry name="awbRegions" type="int32" visibility="public"
               optional="true" container="array" typedef="meteringRectangle">
          <array>
            <size>5</size>
            <size>area_count</size>
          </array>
          <description>List of metering areas to use for auto-white-balance illuminant
          estimation.</description>
          <units>Pixel coordinates within android.sensor.info.activeArraySize</units>
          <range>Coordinates must be between `[(0,0), (width, height))` of
          android.sensor.info.activeArraySize</range>
          <details>
              Not available if android.control.maxRegionsAwb is 0.
              Otherwise will always be present.

              The maximum number of regions supported by the device is determined by the value
              of android.control.maxRegionsAwb.

              The coordinate system is based on the active pixel array,
              with (0,0) being the top-left pixel in the active pixel array, and
              (android.sensor.info.activeArraySize.width - 1,
              android.sensor.info.activeArraySize.height - 1) being the
              bottom-right pixel in the active pixel array.

              The weight must range from 0 to 1000, and represents a weight
              for every pixel in the area. This means that a large metering area
              with the same weight as a smaller area will have more effect in
              the metering result. Metering areas can partially overlap and the
              camera device will add the weights in the overlap region.

              The weights are relative to weights of other white balance metering regions, so if
              only one region is used, all non-zero weights will have the same effect. A region with
              0 weight is ignored.

              If all regions have 0 weight, then no specific metering area needs to be used by the
              camera device.

              If the metering region is outside the used android.scaler.cropRegion returned in
              capture result metadata, the camera device will ignore the sections outside the crop
              region and output only the intersection rectangle as the metering region in the result
              metadata.  If the region is entirely outside the crop region, it will be ignored and
              not reported in the result metadata.
          </details>
          <ndk_details>
              The data representation is `int[5 * area_count]`.
              Every five elements represent a metering region of `(xmin, ymin, xmax, ymax, weight)`.
              The rectangle is defined to be inclusive on xmin and ymin, but exclusive on xmax and
              ymax.
          </ndk_details>
          <hal_details>
              The HAL level representation of MeteringRectangle[] is a
              int[5 * area_count].
              Every five elements represent a metering region of
              (xmin, ymin, xmax, ymax, weight).
              The rectangle is defined to be inclusive on xmin and ymin, but
              exclusive on xmax and ymax.
          </hal_details>
          <tag id="BC" />
        </entry>
        <entry name="captureIntent" type="byte" visibility="public" enum="true"
               hwlevel="legacy">
          <enum>
            <value>CUSTOM
            <notes>The goal of this request doesn't fall into the other
            categories. The camera device will default to preview-like
            behavior.</notes></value>
            <value>PREVIEW
            <notes>This request is for a preview-like use case.

            The precapture trigger may be used to start off a metering
            w/flash sequence.
            </notes></value>
            <value>STILL_CAPTURE
            <notes>This request is for a still capture-type
            use case.

            If the flash unit is under automatic control, it may fire as needed.
            </notes></value>
            <value>VIDEO_RECORD
            <notes>This request is for a video recording
            use case.</notes></value>
            <value>VIDEO_SNAPSHOT
            <notes>This request is for a video snapshot (still
            image while recording video) use case.

            The camera device should take the highest-quality image
            possible (given the other settings) without disrupting the
            frame rate of video recording.  </notes></value>
            <value>ZERO_SHUTTER_LAG
            <notes>This request is for a ZSL usecase; the
            application will stream full-resolution images and
            reprocess one or several later for a final
            capture.
            </notes></value>
            <value>MANUAL
            <notes>This request is for manual capture use case where
            the applications want to directly control the capture parameters.

            For example, the application may wish to manually control
            android.sensor.exposureTime, android.sensor.sensitivity, etc.
            </notes></value>
            <value hal_version="3.3">MOTION_TRACKING
            <notes>This request is for a motion tracking use case, where
            the application will use camera and inertial sensor data to
            locate and track objects in the world.

            The camera device auto-exposure routine will limit the exposure time
            of the camera to no more than 20 milliseconds, to minimize motion blur.
            </notes></value>
          </enum>
          <description>Information to the camera device 3A (auto-exposure,
          auto-focus, auto-white balance) routines about the purpose
          of this capture, to help the camera device to decide optimal 3A
          strategy.</description>
          <details>This control (except for MANUAL) is only effective if
          `android.control.mode != OFF` and any 3A routine is active.

          All intents are supported by all devices, except that:
            * ZERO_SHUTTER_LAG will be supported if android.request.availableCapabilities contains
          PRIVATE_REPROCESSING or YUV_REPROCESSING.
            * MANUAL will be supported if android.request.availableCapabilities contains
          MANUAL_SENSOR.
            * MOTION_TRACKING will be supported if android.request.availableCapabilities contains
          MOTION_TRACKING.
          </details>
          <tag id="BC" />
        </entry>
        <entry name="effectMode" type="byte" visibility="public" enum="true"
               hwlevel="legacy">
          <enum>
            <value>OFF
              <notes>
              No color effect will be applied.
              </notes>
            </value>
            <value optional="true">MONO
              <notes>
              A "monocolor" effect where the image is mapped into
              a single color.

              This will typically be grayscale.
              </notes>
            </value>
            <value optional="true">NEGATIVE
              <notes>
              A "photo-negative" effect where the image's colors
              are inverted.
              </notes>
            </value>
            <value optional="true">SOLARIZE
              <notes>
              A "solarisation" effect (Sabattier effect) where the
              image is wholly or partially reversed in
              tone.
              </notes>
            </value>
            <value optional="true">SEPIA
              <notes>
              A "sepia" effect where the image is mapped into warm
              gray, red, and brown tones.
              </notes>
            </value>
            <value optional="true">POSTERIZE
              <notes>
              A "posterization" effect where the image uses
              discrete regions of tone rather than a continuous
              gradient of tones.
              </notes>
            </value>
            <value optional="true">WHITEBOARD
              <notes>
              A "whiteboard" effect where the image is typically displayed
              as regions of white, with black or grey details.
              </notes>
            </value>
            <value optional="true">BLACKBOARD
              <notes>
              A "blackboard" effect where the image is typically displayed
              as regions of black, with white or grey details.
              </notes>
            </value>
            <value optional="true">AQUA
              <notes>
              An "aqua" effect where a blue hue is added to the image.
              </notes>
            </value>
          </enum>
          <description>A special color effect to apply.</description>
          <range>android.control.availableEffects</range>
          <details>
          When this mode is set, a color effect will be applied
          to images produced by the camera device. The interpretation
          and implementation of these color effects is left to the
          implementor of the camera device, and should not be
          depended on to be consistent (or present) across all
          devices.
          </details>
          <tag id="BC" />
        </entry>
        <entry name="mode" type="byte" visibility="public" enum="true"
               hwlevel="legacy">
          <enum>
            <value>OFF
            <notes>Full application control of pipeline.

            All control by the device's metering and focusing (3A)
            routines is disabled, and no other settings in
            android.control.* have any effect, except that
            android.control.captureIntent may be used by the camera
            device to select post-processing values for processing
            blocks that do not allow for manual control, or are not
            exposed by the camera API.

            However, the camera device's 3A routines may continue to
            collect statistics and update their internal state so that
            when control is switched to AUTO mode, good control values
            can be immediately applied.
            </notes></value>
            <value>AUTO
            <notes>Use settings for each individual 3A routine.

            Manual control of capture parameters is disabled. All
            controls in android.control.* besides sceneMode take
            effect.</notes></value>
            <value optional="true">USE_SCENE_MODE
            <notes>Use a specific scene mode.

            Enabling this disables control.aeMode, control.awbMode and
            control.afMode controls; the camera device will ignore
            those settings while USE_SCENE_MODE is active (except for
            FACE_PRIORITY scene mode). Other control entries are still active.
            This setting can only be used if scene mode is supported (i.e.
            android.control.availableSceneModes
            contain some modes other than DISABLED).</notes></value>
            <value optional="true">OFF_KEEP_STATE
            <notes>Same as OFF mode, except that this capture will not be
            used by camera device background auto-exposure, auto-white balance and
            auto-focus algorithms (3A) to update their statistics.

            Specifically, the 3A routines are locked to the last
            values set from a request with AUTO, OFF, or
            USE_SCENE_MODE, and any statistics or state updates
            collected from manual captures with OFF_KEEP_STATE will be
            discarded by the camera device.
            </notes></value>
          </enum>
          <description>Overall mode of 3A (auto-exposure, auto-white-balance, auto-focus) control
          routines.</description>
          <range>android.control.availableModes</range>
          <details>
          This is a top-level 3A control switch. When set to OFF, all 3A control
          by the camera device is disabled. The application must set the fields for
          capture parameters itself.

          When set to AUTO, the individual algorithm controls in
          android.control.* are in effect, such as android.control.afMode.

          When set to USE_SCENE_MODE, the individual controls in
          android.control.* are mostly disabled, and the camera device
          implements one of the scene mode settings (such as ACTION,
          SUNSET, or PARTY) as it wishes. The camera device scene mode
          3A settings are provided by {@link
          android.hardware.camera2.CaptureResult|ACameraCaptureSession_captureCallback_result
          capture results}.

          When set to OFF_KEEP_STATE, it is similar to OFF mode, the only difference
          is that this frame will not be used by camera device background 3A statistics
          update, as if this frame is never captured. This mode can be used in the scenario
          where the application doesn't want a 3A manual control capture to affect
          the subsequent auto 3A capture results.
          </details>
          <tag id="BC" />
        </entry>
        <entry name="sceneMode" type="byte" visibility="public" enum="true"
               hwlevel="legacy">
          <enum>
            <value id="0">DISABLED
              <notes>
              Indicates that no scene modes are set for a given capture request.
              </notes>
            </value>
            <value>FACE_PRIORITY
              <notes>If face detection support exists, use face
              detection data for auto-focus, auto-white balance, and
              auto-exposure routines.

              If face detection statistics are disabled
              (i.e. android.statistics.faceDetectMode is set to OFF),
              this should still operate correctly (but will not return
              face detection statistics to the framework).

              Unlike the other scene modes, android.control.aeMode,
              android.control.awbMode, and android.control.afMode
              remain active when FACE_PRIORITY is set.
              </notes>
            </value>
            <value optional="true">ACTION
              <notes>
              Optimized for photos of quickly moving objects.

              Similar to SPORTS.
              </notes>
            </value>
            <value optional="true">PORTRAIT
              <notes>
              Optimized for still photos of people.
              </notes>
            </value>
            <value optional="true">LANDSCAPE
              <notes>
              Optimized for photos of distant macroscopic objects.
              </notes>
            </value>
            <value optional="true">NIGHT
              <notes>
              Optimized for low-light settings.
              </notes>
            </value>
            <value optional="true">NIGHT_PORTRAIT
              <notes>
              Optimized for still photos of people in low-light
              settings.
              </notes>
            </value>
            <value optional="true">THEATRE
              <notes>
              Optimized for dim, indoor settings where flash must
              remain off.
              </notes>
            </value>
            <value optional="true">BEACH
              <notes>
              Optimized for bright, outdoor beach settings.
              </notes>
            </value>
            <value optional="true">SNOW
              <notes>
              Optimized for bright, outdoor settings containing snow.
              </notes>
            </value>
            <value optional="true">SUNSET
              <notes>
              Optimized for scenes of the setting sun.
              </notes>
            </value>
            <value optional="true">STEADYPHOTO
              <notes>
              Optimized to avoid blurry photos due to small amounts of
              device motion (for example: due to hand shake).
              </notes>
            </value>
            <value optional="true">FIREWORKS
              <notes>
              Optimized for nighttime photos of fireworks.
              </notes>
            </value>
            <value optional="true">SPORTS
              <notes>
              Optimized for photos of quickly moving people.

              Similar to ACTION.
              </notes>
            </value>
            <value optional="true">PARTY
              <notes>
              Optimized for dim, indoor settings with multiple moving
              people.
              </notes>
            </value>
            <value optional="true">CANDLELIGHT
              <notes>
              Optimized for dim settings where the main light source
              is a flame.
              </notes>
            </value>
            <value optional="true">BARCODE
              <notes>
              Optimized for accurately capturing a photo of barcode
              for use by camera applications that wish to read the
              barcode value.
              </notes>
            </value>
            <value deprecated="true" optional="true" ndk_hidden="true">HIGH_SPEED_VIDEO
              <notes>
              This is deprecated, please use {@link
              android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession}
              and {@link
              android.hardware.camera2.CameraConstrainedHighSpeedCaptureSession#createHighSpeedRequestList}
              for high speed video recording.

              Optimized for high speed video recording (frame rate >=60fps) use case.

              The supported high speed video sizes and fps ranges are specified in
              android.control.availableHighSpeedVideoConfigurations. To get desired
              output frame rates, the application is only allowed to select video size
              and fps range combinations listed in this static metadata. The fps range
              can be control via android.control.aeTargetFpsRange.

              In this mode, the camera device will override aeMode, awbMode, and afMode to
              ON, ON, and CONTINUOUS_VIDEO, respectively. All post-processing block mode
              controls will be overridden to be FAST. Therefore, no manual control of capture
              and post-processing parameters is possible. All other controls operate the
              same as when android.control.mode == AUTO. This means that all other
              android.control.* fields continue to work, such as

              * android.control.aeTargetFpsRange
              * android.control.aeExposureCompensation
              * android.control.aeLock
              * android.control.awbLock
              * android.control.effectMode
              * android.control.aeRegions
              * android.control.afRegions
              * android.control.awbRegions
              * android.control.afTrigger
              * android.control.aePrecaptureTrigger

              Outside of android.control.*, the following controls will work:

              * android.flash.mode (automatic flash for still capture will not work since aeMode is ON)
              * android.lens.opticalStabilizationMode (if it is supported)
              * android.scaler.cropRegion
              * android.statistics.faceDetectMode

              For high speed recording use case, the actual maximum supported frame rate may
              be lower than what camera can output, depending on the destination Surfaces for
              the image data. For example, if the destination surface is from video encoder,
              the application need check if the video encoder is capable of supporting the
              high frame rate for a given video size, or it will end up with lower recording
              frame rate. If the destination surface is from preview window, the preview frame
              rate will be bounded by the screen refresh rate.

              The camera device will only support up to 2 output high speed streams
              (processed non-stalling format defined in android.request.maxNumOutputStreams)
              in this mode. This control will be effective only if all of below conditions are true:

              * The application created no more than maxNumHighSpeedStreams processed non-stalling
              format output streams, where maxNumHighSpeedStreams is calculated as
              min(2, android.request.maxNumOutputStreams[Processed (but not-stalling)]).
              * The stream sizes are selected from the sizes reported by
              android.control.availableHighSpeedVideoConfigurations.
              * No processed non-stalling or raw streams are configured.

              When above conditions are NOT satistied, the controls of this mode and
              android.control.aeTargetFpsRange will be ignored by the camera device,
              the camera device will fall back to android.control.mode `==` AUTO,
              and the returned capture result metadata will give the fps range choosen
              by the camera device.

              Switching into or out of this mode may trigger some camera ISP/sensor
              reconfigurations, which may introduce extra latency. It is recommended that
              the application avoids unnecessary scene mode switch as much as possible.
              </notes>
            </value>
            <value optional="true">HDR
              <notes>
              Turn on a device-specific high dynamic range (HDR) mode.

              In this scene mode, the camera device captures images
              that keep a larger range of scene illumination levels
              visible in the final image. For example, when taking a
              picture of a object in front of a bright window, both
              the object and the scene through the window may be
              visible when using HDR mode, while in normal AUTO mode,
              one or the other may be poorly exposed. As a tradeoff,
              HDR mode generally takes much longer to capture a single
              image, has no user control, and may have other artifacts
              depending on the HDR method used.

              Therefore, HDR captures operate at a much slower rate
              than regular captures.

              In this mode, on LIMITED or FULL devices, when a request
              is made with a android.control.captureIntent of
              STILL_CAPTURE, the camera device will capture an image
              using a high dynamic range capture technique.  On LEGACY
              devices, captures that target a JPEG-format output will
              be captured with HDR, and the capture intent is not
              relevant.

              The HDR capture may involve the device capturing a burst
              of images internally and combining them into one, or it
              may involve the device using specialized high dynamic
              range capture hardware. In all cases, a single image is
              produced in response to a capture request submitted
              while in HDR mode.

              Since substantial post-processing is generally needed to
              produce an HDR image, only YUV, PRIVATE, and JPEG
              outputs are supported for LIMITED/FULL device HDR
              captures, and only JPEG outputs are supported for LEGACY
              HDR captures. Using a RAW output for HDR capture is not
              supported.

              Some devices may also support always-on HDR, which
              applies HDR processing at full frame rate.  For these
              devices, intents other than STILL_CAPTURE will also
              produce an HDR output with no frame rate impact compared
              to normal operation, though the quality may be lower
              than for STILL_CAPTURE intents.

              If SCENE_MODE_HDR is used with unsupported output types
              or capture intents, the images captured will be as if
              the SCENE_MODE was not enabled at all.
              </notes>
            </value>
            <value optional="true" hidden="true">FACE_PRIORITY_LOW_LIGHT
              <notes>Same as FACE_PRIORITY scene mode, except that the camera
              device will choose higher sensitivity values (android.sensor.sensitivity)
              under low light conditions.

              The camera device may be tuned to expose the images in a reduced
              sensitivity range to produce the best quality images. For example,
              if the android.sensor.info.sensitivityRange gives range of [100, 1600],
              the camera device auto-exposure routine tuning process may limit the actual
              exposure sensitivity range to [100, 1200] to ensure that the noise level isn't
              exessive in order to preserve the image quality. Under this situation, the image under
              low light may be under-exposed when the sensor max exposure time (bounded by the
              android.control.aeTargetFpsRange when android.control.aeMode is one of the
              ON_* modes) and effective max sensitivity are reached. This scene mode allows the
              camera device auto-exposure routine to increase the sensitivity up to the max
              sensitivity specified by android.sensor.info.sensitivityRange when the scene is too
              dark and the max exposure time is reached. The captured images may be noisier
              compared with the images captured in normal FACE_PRIORITY mode; therefore, it is
              recommended that the application only use this scene mode when it is capable of
              reducing the noise level of the captured images.

              Unlike the other scene modes, android.control.aeMode,
              android.control.awbMode, and android.control.afMode
              remain active when FACE_PRIORITY_LOW_LIGHT is set.
              </notes>
            </value>
            <value optional="true" hidden="true" id="100">DEVICE_CUSTOM_START
              <notes>
                Scene mode values within the range of
                `[DEVICE_CUSTOM_START, DEVICE_CUSTOM_END]` are reserved for device specific
                customized scene modes.
              </notes>
            </value>
            <value optional="true" hidden="true" id="127">DEVICE_CUSTOM_END
              <notes>
                Scene mode values within the range of
                `[DEVICE_CUSTOM_START, DEVICE_CUSTOM_END]` are reserved for device specific
                customized scene modes.
              </notes>
            </value>
          </enum>
          <description>
          Control for which scene mode is currently active.
          </description>
          <range>android.control.availableSceneModes</range>
          <details>
          Scene modes are custom camera modes optimized for a certain set of conditions and
          capture settings.

          This is the mode that that is active when
          `android.control.mode == USE_SCENE_MODE`. Aside from FACE_PRIORITY, these modes will
          disable android.control.aeMode, android.control.awbMode, and android.control.afMode
          while in use.

          The interpretation and implementation of these scene modes is left
          to the implementor of the camera device. Their behavior will not be
          consistent across all devices, and any given device may only implement
          a subset of these modes.
          </details>
          <hal_details>
          HAL implementations that include scene modes are expected to provide
          the per-scene settings to use for android.control.aeMode,
          android.control.awbMode, and android.control.afMode in
          android.control.sceneModeOverrides.

          For HIGH_SPEED_VIDEO mode, if it is included in android.control.availableSceneModes, the
          HAL must list supported video size and fps range in
          android.control.availableHighSpeedVideoConfigurations. For a given size, e.g.  1280x720,
          if the HAL has two different sensor configurations for normal streaming mode and high
          speed streaming, when this scene mode is set/reset in a sequence of capture requests, the
          HAL may have to switch between different sensor modes.  This mode is deprecated in legacy
          HAL3.3, to support high speed video recording, please implement
          android.control.availableHighSpeedVideoConfigurations and CONSTRAINED_HIGH_SPEED_VIDEO
          capbility defined in android.request.availableCapabilities.
          </hal_details>
          <tag id="BC" />
        </entry>
        <entry name="videoStabilizationMode" type="byte" visibility="public"
               enum="true" hwlevel="legacy">
          <enum>
            <value>OFF
            <notes>
              Video stabilization is disabled.
            </notes></value>
            <value>ON
            <notes>
              Video stabilization is enabled.
            </notes></value>
          </enum>
          <description>Whether video stabilization is
          active.</description>
          <details>
          Video stabilization automatically warps images from
          the camera in order to stabilize motion between consecutive frames.

          If enabled, video stabilization can modify the
          android.scaler.cropRegion to keep the video stream stabilized.

          Switching between different video stabilization modes may take several
          frames to initialize, the camera device will report the current mode
          in capture result metadata. For example, When "ON" mode is requested,
          the video stabilization modes in the first several capture results may
          still be "OFF", and it will become "ON" when the initialization is
          done.

          In addition, not all recording sizes or frame rates may be supported for
          stabilization by a device that reports stabilization support. It is guaranteed
          that an output targeting a MediaRecorder or MediaCodec will be stabilized if
          the recording resolution is less than or equal to 1920 x 1080 (width less than
          or equal to 1920, height less than or equal to 1080), and the recording
          frame rate is less than or equal to 30fps.  At other sizes, the CaptureResult
          android.control.videoStabilizationMode field will return
          OFF if the recording output is not stabilized, or if there are no output
          Surface types that can be stabilized.

          If a camera device supports both this mode and OIS
          (android.lens.opticalStabilizationMode), turning both modes on may
          produce undesirable interaction, so it is recommended not to enable
          both at the same time.
          </details>
          <tag id="BC" />
        </entry>
      </controls>
      <static>
        <entry name="aeAvailableAntibandingModes" type="byte" visibility="public"
               type_notes="list of enums" container="array" typedef="enumList"
               hwlevel="legacy">
          <array>
            <size>n</size>
          </array>
          <description>
            List of auto-exposure antibanding modes for android.control.aeAntibandingMode that are
            supported by this camera device.
          </description>
          <range>Any value listed in android.control.aeAntibandingMode</range>
          <details>
            Not all of the auto-exposure anti-banding modes may be
            supported by a given camera device. This field lists the
            valid anti-banding modes that the application may request
            for this camera device with the
            android.control.aeAntibandingMode control.
          </details>
          <tag id="BC" />
        </entry>
        <entry name="aeAvailableModes" type="byte" visibility="public"
               type_notes="list of enums" container="array" typedef="enumList"
               hwlevel="legacy">
          <array>
            <size>n</size>
          </array>
          <description>
            List of auto-exposure modes for android.control.aeMode that are supported by this camera
            device.
          </description>
          <range>Any value listed in android.control.aeMode</range>
          <details>
            Not all the auto-exposure modes may be supported by a
            given camera device, especially if no flash unit is
            available. This entry lists the valid modes for
            android.control.aeMode for this camera device.

            All camera devices support ON, and all camera devices with flash
            units support ON_AUTO_FLASH and ON_ALWAYS_FLASH.

            FULL mode camera devices always support OFF mode,
            which enables application control of camera exposure time,
            sensitivity, and frame duration.

            LEGACY mode camera devices never support OFF mode.
            LIMITED mode devices support OFF if they support the MANUAL_SENSOR
            capability.
          </details>
          <tag id="BC" />
        </entry>
        <entry name="aeAvailableTargetFpsRanges" type="int32" visibility="public"
               type_notes="list of pairs of frame rates"
               container="array" typedef="rangeInt"
               hwlevel="legacy">
          <array>
            <size>2</size>
            <size>n</size>
          </array>
          <description>List of frame rate ranges for android.control.aeTargetFpsRange supported by
          this camera device.</description>
          <units>Frames per second (FPS)</units>
          <details>
          For devices at the LEGACY level or above:

          * For constant-framerate recording, for each normal
          {@link android.media.CamcorderProfile CamcorderProfile}, that is, a
          {@link android.media.CamcorderProfile CamcorderProfile} that has
          {@link android.media.CamcorderProfile#quality quality} in
          the range [{@link android.media.CamcorderProfile#QUALITY_LOW QUALITY_LOW},
          {@link android.media.CamcorderProfile#QUALITY_2160P QUALITY_2160P}], if the profile is
          supported by the device and has
          {@link android.media.CamcorderProfile#videoFrameRate videoFrameRate} `x`, this list will
          always include (`x`,`x`).

          * Also, a camera device must either not support any
          {@link android.media.CamcorderProfile CamcorderProfile},
          or support at least one
          normal {@link android.media.CamcorderProfile CamcorderProfile} that has
          {@link android.media.CamcorderProfile#videoFrameRate videoFrameRate} `x` &gt;= 24.

          For devices at the LIMITED level or above:

          * For YUV_420_888 burst capture use case, this list will always include (`min`, `max`)
          and (`max`, `max`) where `min` &lt;= 15 and `max` = the maximum output frame rate of the
          maximum YUV_420_888 output size.
          </details>
          <tag id="BC" />
        </entry>
        <entry name="aeCompensationRange" type="int32" visibility="public"
               container="array" typedef="rangeInt"
               hwlevel="legacy">
          <array>
            <size>2</size>
          </array>
          <description>Maximum and minimum exposure compensation values for
          android.control.aeExposureCompensation, in counts of android.control.aeCompensationStep,
          that are supported by this camera device.</description>
          <range>
            Range [0,0] indicates that exposure compensation is not supported.

            For LIMITED and FULL devices, range must follow below requirements if exposure
            compensation is supported (`range != [0, 0]`):

            `Min.exposure compensation * android.control.aeCompensationStep &lt;= -2 EV`

            `Max.exposure compensation * android.control.aeCompensationStep &gt;= 2 EV`

            LEGACY devices may support a smaller range than this.
          </range>
          <tag id="BC" />
        </entry>
        <entry name="aeCompensationStep" type="rational" visibility="public"
               hwlevel="legacy">
          <description>Smallest step by which the exposure compensation
          can be changed.</description>
          <units>Exposure Value (EV)</units>
          <details>
          This is the unit for android.control.aeExposureCompensation. For example, if this key has
          a value of `1/2`, then a setting of `-2` for android.control.aeExposureCompensation means
          that the target EV offset for the auto-exposure routine is -1 EV.

          One unit of EV compensation changes the brightness of the captured image by a factor
          of two. +1 EV doubles the image brightness, while -1 EV halves the image brightness.
          </details>
          <hal_details>
            This must be less than or equal to 1/2.
          </hal_details>
          <tag id="BC" />
        </entry>
        <entry name="afAvailableModes" type="byte" visibility="public"
               type_notes="List of enums" container="array" typedef="enumList"
               hwlevel="legacy">
          <array>
            <size>n</size>
          </array>
          <description>
          List of auto-focus (AF) modes for android.control.afMode that are
          supported by this camera device.
          </description>
          <range>Any value listed in android.control.afMode</range>
          <details>
          Not all the auto-focus modes may be supported by a
          given camera device. This entry lists the valid modes for
          android.control.afMode for this camera device.

          All LIMITED and FULL mode camera devices will support OFF mode, and all
          camera devices with adjustable focuser units
          (`android.lens.info.minimumFocusDistance &gt; 0`) will support AUTO mode.

          LEGACY devices will support OFF mode only if they support
          focusing to infinity (by also setting android.lens.focusDistance to
          `0.0f`).
          </details>
          <tag id="BC" />
        </entry>
        <entry name="availableEffects" type="byte" visibility="public"
               type_notes="List of enums (android.control.effectMode)." container="array"
               typedef="enumList" hwlevel="legacy">
          <array>
            <size>n</size>
          </array>
          <description>
          List of color effects for android.control.effectMode that are supported by this camera
          device.
          </description>
          <range>Any value listed in android.control.effectMode</range>
          <details>
          This list contains the color effect modes that can be applied to
          images produced by the camera device.
          Implementations are not expected to be consistent across all devices.
          If no color effect modes are available for a device, this will only list
          OFF.

          A color effect will only be applied if
          android.control.mode != OFF.  OFF is always included in this list.

          This control has no effect on the operation of other control routines such
          as auto-exposure, white balance, or focus.
          </details>
          <tag id="BC" />
        </entry>
        <entry name="availableSceneModes" type="byte" visibility="public"
               type_notes="List of enums (android.control.sceneMode)."
               container="array" typedef="enumList" hwlevel="legacy">
          <array>
            <size>n</size>
          </array>
          <description>
          List of scene modes for android.control.sceneMode that are supported by this camera
          device.
          </description>
          <range>Any value listed in android.control.sceneMode</range>
          <details>
          This list contains scene modes that can be set for the camera device.
          Only scene modes that have been fully implemented for the
          camera device may be included here. Implementations are not expected
          to be consistent across all devices.

          If no scene modes are supported by the camera device, this
          will be set to DISABLED. Otherwise DISABLED will not be listed.

          FACE_PRIORITY is always listed if face detection is
          supported (i.e.`android.statistics.info.maxFaceCount &gt;
          0`).
          </details>
          <tag id="BC" />
        </entry>
        <entry name="availableVideoStabilizationModes" type="byte"
               visibility="public" type_notes="List of enums." container="array"
               typedef="enumList" hwlevel="legacy">
          <array>
            <size>n</size>
          </array>
          <description>
          List of video stabilization modes for android.control.videoStabilizationMode
          that are supported by this camera device.
          </description>
          <range>Any value listed in android.control.videoStabilizationMode</range>
          <details>
          OFF will always be listed.
          </details>
          <tag id="BC" />
        </entry>
        <entry name="awbAvailableModes" type="byte" visibility="public"
               type_notes="List of enums"
               container="array" typedef="enumList" hwlevel="legacy">
          <array>
            <size>n</size>
          </array>
          <description>
          List of auto-white-balance modes for android.control.awbMode that are supported by this
          camera device.
          </description>
          <range>Any value listed in android.control.awbMode</range>
          <details>
          Not all the auto-white-balance modes may be supported by a
          given camera device. This entry lists the valid modes for
          android.control.awbMode for this camera device.

          All camera devices will support ON mode.

          Camera devices that support the MANUAL_POST_PROCESSING capability will always support OFF
          mode, which enables application control of white balance, by using
          android.colorCorrection.transform and android.colorCorrection.gains
          (android.colorCorrection.mode must be set to TRANSFORM_MATRIX). This includes all FULL
          mode camera devices.
          </details>
          <tag id="BC" />
        </entry>
        <entry name="maxRegions" type="int32" visibility="ndk_public"
               container="array" hwlevel="legacy">
          <array>
            <size>3</size>
          </array>
          <description>
          List of the maximum number of regions that can be used for metering in
          auto-exposure (AE), auto-white balance (AWB), and auto-focus (AF);
          this corresponds to the the maximum number of elements in
          android.control.aeRegions, android.control.awbRegions,
          and android.control.afRegions.
          </description>
          <range>
          Value must be &amp;gt;= 0 for each element. For full-capability devices
          this value must be &amp;gt;= 1 for AE and AF. The order of the elements is:
          `(AE, AWB, AF)`.</range>
          <tag id="BC" />
        </entry>
        <entry name="maxRegionsAe" type="int32" visibility="java_public"
               synthetic="true" hwlevel="legacy">
          <description>
          The maximum number of metering regions that can be used by the auto-exposure (AE)
          routine.
          </description>
          <range>Value will be &amp;gt;= 0. For FULL-capability devices, this
          value will be &amp;gt;= 1.
          </range>
          <details>
          This corresponds to the the maximum allowed number of elements in
          android.control.aeRegions.
          </details>
          <hal_details>This entry is private to the framework. Fill in
          maxRegions to have this entry be automatically populated.
          </hal_details>
        </entry>
        <entry name="maxRegionsAwb" type="int32" visibility="java_public"
               synthetic="true" hwlevel="legacy">
          <description>
          The maximum number of metering regions that can be used by the auto-white balance (AWB)
          routine.
          </description>
          <range>Value will be &amp;gt;= 0.
          </range>
          <details>
          This corresponds to the the maximum allowed number of elements in
          android.control.awbRegions.
          </details>
          <hal_details>This entry is private to the framework. Fill in
          maxRegions to have this entry be automatically populated.
          </hal_details>
        </entry>
        <entry name="maxRegionsAf" type="int32" visibility="java_public"
               synthetic="true" hwlevel="legacy">
          <description>
          The maximum number of metering regions that can be used by the auto-focus (AF) routine.
          </description>
          <range>Value will be &amp;gt;= 0. For FULL-capability devices, this
          value will be &amp;gt;= 1.
          </range>
          <details>
          This corresponds to the the maximum allowed number of elements in
          android.control.afRegions.
          </details>
          <hal_details>This entry is private to the framework. Fill in
          maxRegions to have this entry be automatically populated.
          </hal_details>
        </entry>
        <entry name="sceneModeOverrides" type="byte" visibility="system"
               container="array" hwlevel="limited">
          <array>
            <size>3</size>
            <size>length(availableSceneModes)</size>
          </array>
          <description>
          Ordered list of auto-exposure, auto-white balance, and auto-focus
          settings to use with each available scene mode.
          </description>
          <range>
          For each available scene mode, the list must contain three
          entries containing the android.control.aeMode,
          android.control.awbMode, and android.control.afMode values used
          by the camera device. The entry order is `(aeMode, awbMode, afMode)`
          where aeMode has the lowest index position.
          </range>
          <details>
          When a scene mode is enabled, the camera device is expected
          to override android.control.aeMode, android.control.awbMode,
          and android.control.afMode with its preferred settings for
          that scene mode.

          The order of this list matches that of availableSceneModes,
          with 3 entries for each mode.  The overrides listed
          for FACE_PRIORITY and FACE_PRIORITY_LOW_LIGHT (if supported) are ignored,
          since for that mode the application-set android.control.aeMode,
          android.control.awbMode, and android.control.afMode values are
          used instead, matching the behavior when android.control.mode
          is set to AUTO. It is recommended that the FACE_PRIORITY and
          FACE_PRIORITY_LOW_LIGHT (if supported) overrides should be set to 0.

          For example, if availableSceneModes contains
          `(FACE_PRIORITY, ACTION, NIGHT)`,  then the camera framework
          expects sceneModeOverrides to have 9 entries formatted like:
          `(0, 0, 0, ON_AUTO_FLASH, AUTO, CONTINUOUS_PICTURE,
          ON_AUTO_FLASH, INCANDESCENT, AUTO)`.
          </details>
          <hal_details>
          To maintain backward compatibility, this list will be made available
          in the static metadata of the camera service.  The camera service will
          use these values to set android.control.aeMode,
          android.control.awbMode, and android.control.afMode when using a scene
          mode other than FACE_PRIORITY and FACE_PRIORITY_LOW_LIGHT (if supported).
          </hal_details>
          <tag id="BC" />
        </entry>
      </static>
      <dynamic>
        <entry name="aePrecaptureId" type="int32" visibility="system" deprecated="true">
          <description>The ID sent with the latest
          CAMERA2_TRIGGER_PRECAPTURE_METERING call</description>
          <deprecation_description>
            Removed in camera HAL v3
          </deprecation_description>
          <details>Must be 0 if no
          CAMERA2_TRIGGER_PRECAPTURE_METERING trigger received yet
          by HAL. Always updated even if AE algorithm ignores the
          trigger</details>
        </entry>
        <clone entry="android.control.aeAntibandingMode" kind="controls">
        </clone>
        <clone entry="android.control.aeExposureCompensation" kind="controls">
        </clone>
        <clone entry="android.control.aeLock" kind="controls">
        </clone>
        <clone entry="android.control.aeMode" kind="controls">
        </clone>
        <clone entry="android.control.aeRegions" kind="controls">
        </clone>
        <clone entry="android.control.aeTargetFpsRange" kind="controls">
        </clone>
        <clone entry="android.control.aePrecaptureTrigger" kind="controls">
        </clone>
        <entry name="aeState" type="byte" visibility="public" enum="true"
               hwlevel="limited">
          <enum>
            <value>INACTIVE
            <notes>AE is off or recently reset.

            When a camera device is opened, it starts in
            this state. This is a transient state, the camera device may skip reporting
            this state in capture result.</notes></value>
            <value>SEARCHING
            <notes>AE doesn't yet have a good set of control values
            for the current scene.

            This is a transient state, the camera device may skip
            reporting this state in capture result.</notes></value>
            <value>CONVERGED
            <notes>AE has a good set of control values for the
            current scene.</notes></value>
            <value>LOCKED
            <notes>AE has been locked.</notes></value>
            <value>FLASH_REQUIRED
            <notes>AE has a good set of control values, but flash
            needs to be fired for good quality still
            capture.</notes></value>
            <value>PRECAPTURE
            <notes>AE has been asked to do a precapture sequence
            and is currently executing it.

            Precapture can be triggered through setting
            android.control.aePrecaptureTrigger to START. Currently
            active and completed (if it causes camera device internal AE lock) precapture
            metering sequence can be canceled through setting
            android.control.aePrecaptureTrigger to CANCEL.

            Once PRECAPTURE completes, AE will transition to CONVERGED
            or FLASH_REQUIRED as appropriate. This is a transient
            state, the camera device may skip reporting this state in
            capture result.</notes></value>
          </enum>
          <description>Current state of the auto-exposure (AE) algorithm.</description>
          <details>Switching between or enabling AE modes (android.control.aeMode) always
          resets the AE state to INACTIVE. Similarly, switching between android.control.mode,
          or android.control.sceneMode if `android.control.mode == USE_SCENE_MODE` resets all
          the algorithm states to INACTIVE.

          The camera device can do several state transitions between two results, if it is
          allowed by the state transition table. For example: INACTIVE may never actually be
          seen in a result.

          The state in the result is the state for this image (in sync with this image): if
          AE state becomes CONVERGED, then the image data associated with this result should
          be good to use.

          Below are state transition tables for different AE modes.

            State       | Transition Cause | New State | Notes
          :------------:|:----------------:|:---------:|:-----------------------:
          INACTIVE      |                  | INACTIVE  | Camera device auto exposure algorithm is disabled

          When android.control.aeMode is AE_MODE_ON*:

            State        | Transition Cause                             | New State      | Notes
          :-------------:|:--------------------------------------------:|:--------------:|:-----------------:
          INACTIVE       | Camera device initiates AE scan              | SEARCHING      | Values changing
          INACTIVE       | android.control.aeLock is ON                 | LOCKED         | Values locked
          SEARCHING      | Camera device finishes AE scan               | CONVERGED      | Good values, not changing
          SEARCHING      | Camera device finishes AE scan               | FLASH_REQUIRED | Converged but too dark w/o flash
          SEARCHING      | android.control.aeLock is ON                 | LOCKED         | Values locked
          CONVERGED      | Camera device initiates AE scan              | SEARCHING      | Values changing
          CONVERGED      | android.control.aeLock is ON                 | LOCKED         | Values locked
          FLASH_REQUIRED | Camera device initiates AE scan              | SEARCHING      | Values changing
          FLASH_REQUIRED | android.control.aeLock is ON                 | LOCKED         | Values locked
          LOCKED         | android.control.aeLock is OFF                | SEARCHING      | Values not good after unlock
          LOCKED         | android.control.aeLock is OFF                | CONVERGED      | Values good after unlock
          LOCKED         | android.control.aeLock is OFF                | FLASH_REQUIRED | Exposure good, but too dark
          PRECAPTURE     | Sequence done. android.control.aeLock is OFF | CONVERGED      | Ready for high-quality capture
          PRECAPTURE     | Sequence done. android.control.aeLock is ON  | LOCKED         | Ready for high-quality capture
          LOCKED         | aeLock is ON and aePrecaptureTrigger is START | LOCKED        | Precapture trigger is ignored when AE is already locked
          LOCKED         | aeLock is ON and aePrecaptureTrigger is CANCEL| LOCKED        | Precapture trigger is ignored when AE is already locked
          Any state (excluding LOCKED) | android.control.aePrecaptureTrigger is START | PRECAPTURE     | Start AE precapture metering sequence
          Any state (excluding LOCKED) | android.control.aePrecaptureTrigger is CANCEL| INACTIVE       | Currently active precapture metering sequence is canceled

          If the camera device supports AE external flash mode (ON_EXTERNAL_FLASH is included in
          android.control.aeAvailableModes), android.control.aeState must be FLASH_REQUIRED after
          the camera device finishes AE scan and it's too dark without flash.

          For the above table, the camera device may skip reporting any state changes that happen
          without application intervention (i.e. mode switch, trigger, locking). Any state that
          can be skipped in that manner is called a transient state.

          For example, for above AE modes (AE_MODE_ON*), in addition to the state transitions
          listed in above table, it is also legal for the camera device to skip one or more
          transient states between two results. See below table for examples:

            State        | Transition Cause                                            | New State      | Notes
          :-------------:|:-----------------------------------------------------------:|:--------------:|:-----------------:
          INACTIVE       | Camera device finished AE scan                              | CONVERGED      | Values are already good, transient states are skipped by camera device.
          Any state (excluding LOCKED) | android.control.aePrecaptureTrigger is START, sequence done | FLASH_REQUIRED | Converged but too dark w/o flash after a precapture sequence, transient states are skipped by camera device.
          Any state (excluding LOCKED) | android.control.aePrecaptureTrigger is START, sequence done | CONVERGED      | Converged after a precapture sequence, transient states are skipped by camera device.
          Any state (excluding LOCKED) | android.control.aePrecaptureTrigger is CANCEL, converged    | FLASH_REQUIRED | Converged but too dark w/o flash after a precapture sequence is canceled, transient states are skipped by camera device.
          Any state (excluding LOCKED) | android.control.aePrecaptureTrigger is CANCEL, converged    | CONVERGED      | Converged after a precapture sequenceis canceled, transient states are skipped by camera device.
          CONVERGED      | Camera device finished AE scan                              | FLASH_REQUIRED | Converged but too dark w/o flash after a new scan, transient states are skipped by camera device.
          FLASH_REQUIRED | Camera device finished AE scan                              | CONVERGED      | Converged after a new scan, transient states are skipped by camera device.
          </details>
        </entry>
        <clone entry="android.control.afMode" kind="controls">
        </clone>
        <clone entry="android.control.afRegions" kind="controls">
        </clone>
        <clone entry="android.control.afTrigger" kind="controls">
        </clone>
        <entry name="afState" type="byte" visibility="public" enum="true"
               hwlevel="legacy">
          <enum>
            <value>INACTIVE
            <notes>AF is off or has not yet tried to scan/been asked
            to scan.

            When a camera device is opened, it starts in this
            state. This is a transient state, the camera device may
            skip reporting this state in capture
            result.</notes></value>
            <value>PASSIVE_SCAN
            <notes>AF is currently performing an AF scan initiated the
            camera device in a continuous autofocus mode.

            Only used by CONTINUOUS_* AF modes. This is a transient
            state, the camera device may skip reporting this state in
            capture result.</notes></value>
            <value>PASSIVE_FOCUSED
            <notes>AF currently believes it is in focus, but may
            restart scanning at any time.

            Only used by CONTINUOUS_* AF modes. This is a transient
            state, the camera device may skip reporting this state in
            capture result.</notes></value>
            <value>ACTIVE_SCAN
            <notes>AF is performing an AF scan because it was
            triggered by AF trigger.

            Only used by AUTO or MACRO AF modes. This is a transient
            state, the camera device may skip reporting this state in
            capture result.</notes></value>
            <value>FOCUSED_LOCKED
            <notes>AF believes it is focused correctly and has locked
            focus.

            This state is reached only after an explicit START AF trigger has been
            sent (android.control.afTrigger), when good focus has been obtained.

            The lens will remain stationary until the AF mode (android.control.afMode) is changed or
            a new AF trigger is sent to the camera device (android.control.afTrigger).
            </notes></value>
            <value>NOT_FOCUSED_LOCKED
            <notes>AF has failed to focus successfully and has locked
            focus.

            This state is reached only after an explicit START AF trigger has been
            sent (android.control.afTrigger), when good focus cannot be obtained.

            The lens will remain stationary until the AF mode (android.control.afMode) is changed or
            a new AF trigger is sent to the camera device (android.control.afTrigger).
            </notes></value>
            <value>PASSIVE_UNFOCUSED
            <notes>AF finished a passive scan without finding focus,
            and may restart scanning at any time.

            Only used by CONTINUOUS_* AF modes. This is a transient state, the camera
            device may skip reporting this state in capture result.

            LEGACY camera devices do not support this state. When a passive
            scan has finished, it will always go to PASSIVE_FOCUSED.
            </notes></value>
          </enum>
          <description>Current state of auto-focus (AF) algorithm.</description>
          <details>
          Switching between or enabling AF modes (android.control.afMode) always
          resets the AF state to INACTIVE. Similarly, switching between android.control.mode,
          or android.control.sceneMode if `android.control.mode == USE_SCENE_MODE` resets all
          the algorithm states to INACTIVE.

          The camera device can do several state transitions between two results, if it is
          allowed by the state transition table. For example: INACTIVE may never actually be
          seen in a result.

          The state in the result is the state for this image (in sync with this image): if
          AF state becomes FOCUSED, then the image data associated with this result should
          be sharp.

          Below are state transition tables for different AF modes.

          When android.control.afMode is AF_MODE_OFF or AF_MODE_EDOF:

            State       | Transition Cause | New State | Notes
          :------------:|:----------------:|:---------:|:-----------:
          INACTIVE      |                  | INACTIVE  | Never changes

          When android.control.afMode is AF_MODE_AUTO or AF_MODE_MACRO:

            State            | Transition Cause | New State          | Notes
          :-----------------:|:----------------:|:------------------:|:--------------:
          INACTIVE           | AF_TRIGGER       | ACTIVE_SCAN        | Start AF sweep, Lens now moving
          ACTIVE_SCAN        | AF sweep done    | FOCUSED_LOCKED     | Focused, Lens now locked
          ACTIVE_SCAN        | AF sweep done    | NOT_FOCUSED_LOCKED | Not focused, Lens now locked
          ACTIVE_SCAN        | AF_CANCEL        | INACTIVE           | Cancel/reset AF, Lens now locked
          FOCUSED_LOCKED     | AF_CANCEL        | INACTIVE           | Cancel/reset AF
          FOCUSED_LOCKED     | AF_TRIGGER       | ACTIVE_SCAN        | Start new sweep, Lens now moving
          NOT_FOCUSED_LOCKED | AF_CANCEL        | INACTIVE           | Cancel/reset AF
          NOT_FOCUSED_LOCKED | AF_TRIGGER       | ACTIVE_SCAN        | Start new sweep, Lens now moving
          Any state          | Mode change      | INACTIVE           |

          For the above table, the camera device may skip reporting any state changes that happen
          without application intervention (i.e. mode switch, trigger, locking). Any state that
          can be skipped in that manner is called a transient state.

          For example, for these AF modes (AF_MODE_AUTO and AF_MODE_MACRO), in addition to the
          state transitions listed in above table, it is also legal for the camera device to skip
          one or more transient states between two results. See below table for examples:

            State            | Transition Cause | New State          | Notes
          :-----------------:|:----------------:|:------------------:|:--------------:
          INACTIVE           | AF_TRIGGER       | FOCUSED_LOCKED     | Focus is already good or good after a scan, lens is now locked.
          INACTIVE           | AF_TRIGGER       | NOT_FOCUSED_LOCKED | Focus failed after a scan, lens is now locked.
          FOCUSED_LOCKED     | AF_TRIGGER       | FOCUSED_LOCKED     | Focus is already good or good after a scan, lens is now locked.
          NOT_FOCUSED_LOCKED | AF_TRIGGER       | FOCUSED_LOCKED     | Focus is good after a scan, lens is not locked.


          When android.control.afMode is AF_MODE_CONTINUOUS_VIDEO:

            State            | Transition Cause                    | New State          | Notes
          :-----------------:|:-----------------------------------:|:------------------:|:--------------:
          INACTIVE           | Camera device initiates new scan    | PASSIVE_SCAN       | Start AF scan, Lens now moving
          INACTIVE           | AF_TRIGGER                          | NOT_FOCUSED_LOCKED | AF state query, Lens now locked
          PASSIVE_SCAN       | Camera device completes current scan| PASSIVE_FOCUSED    | End AF scan, Lens now locked
          PASSIVE_SCAN       | Camera device fails current scan    | PASSIVE_UNFOCUSED  | End AF scan, Lens now locked
          PASSIVE_SCAN       | AF_TRIGGER                          | FOCUSED_LOCKED     | Immediate transition, if focus is good. Lens now locked
          PASSIVE_SCAN       | AF_TRIGGER                          | NOT_FOCUSED_LOCKED | Immediate transition, if focus is bad. Lens now locked
          PASSIVE_SCAN       | AF_CANCEL                           | INACTIVE           | Reset lens position, Lens now locked
          PASSIVE_FOCUSED    | Camera device initiates new scan    | PASSIVE_SCAN       | Start AF scan, Lens now moving
          PASSIVE_UNFOCUSED  | Camera device initiates new scan    | PASSIVE_SCAN       | Start AF scan, Lens now moving
          PASSIVE_FOCUSED    | AF_TRIGGER                          | FOCUSED_LOCKED     | Immediate transition, lens now locked
          PASSIVE_UNFOCUSED  | AF_TRIGGER                          | NOT_FOCUSED_LOCKED | Immediate transition, lens now locked
          FOCUSED_LOCKED     | AF_TRIGGER                          | FOCUSED_LOCKED     | No effect
          FOCUSED_LOCKED     | AF_CANCEL                           | INACTIVE           | Restart AF scan
          NOT_FOCUSED_LOCKED | AF_TRIGGER                          | NOT_FOCUSED_LOCKED | No effect
          NOT_FOCUSED_LOCKED | AF_CANCEL                           | INACTIVE           | Restart AF scan

          When android.control.afMode is AF_MODE_CONTINUOUS_PICTURE:

            State            | Transition Cause                     | New State          | Notes
          :-----------------:|:------------------------------------:|:------------------:|:--------------:
          INACTIVE           | Camera device initiates new scan     | PASSIVE_SCAN       | Start AF scan, Lens now moving
          INACTIVE           | AF_TRIGGER                           | NOT_FOCUSED_LOCKED | AF state query, Lens now locked
          PASSIVE_SCAN       | Camera device completes current scan | PASSIVE_FOCUSED    | End AF scan, Lens now locked
          PASSIVE_SCAN       | Camera device fails current scan     | PASSIVE_UNFOCUSED  | End AF scan, Lens now locked
          PASSIVE_SCAN       | AF_TRIGGER                           | FOCUSED_LOCKED     | Eventual transition once the focus is good. Lens now locked
          PASSIVE_SCAN       | AF_TRIGGER                           | NOT_FOCUSED_LOCKED | Eventual transition if cannot find focus. Lens now locked
          PASSIVE_SCAN       | AF_CANCEL                            | INACTIVE           | Reset lens position, Lens now locked
          PASSIVE_FOCUSED    | Camera device initiates new scan     | PASSIVE_SCAN       | Start AF scan, Lens now moving
          PASSIVE_UNFOCUSED  | Camera device initiates new scan     | PASSIVE_SCAN       | Start AF scan, Lens now moving
          PASSIVE_FOCUSED    | AF_TRIGGER                           | FOCUSED_LOCKED     | Immediate trans. Lens now locked
          PASSIVE_UNFOCUSED  | AF_TRIGGER                           | NOT_FOCUSED_LOCKED | Immediate trans. Lens now locked
          FOCUSED_LOCKED     | AF_TRIGGER                           | FOCUSED_LOCKED     | No effect
          FOCUSED_LOCKED     | AF_CANCEL                            | INACTIVE           | Restart AF scan
          NOT_FOCUSED_LOCKED | AF_TRIGGER                           | NOT_FOCUSED_LOCKED | No effect
          NOT_FOCUSED_LOCKED | AF_CANCEL                            | INACTIVE           | Restart AF scan

          When switch between AF_MODE_CONTINUOUS_* (CAF modes) and AF_MODE_AUTO/AF_MODE_MACRO
          (AUTO modes), the initial INACTIVE or PASSIVE_SCAN states may be skipped by the
          camera device. When a trigger is included in a mode switch request, the trigger
          will be evaluated in the context of the new mode in the request.
          See below table for examples:

            State      | Transition Cause                       | New State                                | Notes
          :-----------:|:--------------------------------------:|:----------------------------------------:|:--------------:
          any state    | CAF-->AUTO mode switch                 | INACTIVE                                 | Mode switch without trigger, initial state must be INACTIVE
          any state    | CAF-->AUTO mode switch with AF_TRIGGER | trigger-reachable states from INACTIVE   | Mode switch with trigger, INACTIVE is skipped
          any state    | AUTO-->CAF mode switch                 | passively reachable states from INACTIVE | Mode switch without trigger, passive transient state is skipped
          </details>
        </entry>
        <entry name="afTriggerId" type="int32" visibility="system" deprecated="true">
          <description>The ID sent with the latest
          CAMERA2_TRIGGER_AUTOFOCUS call</description>
          <deprecation_description>
            Removed in camera HAL v3
          </deprecation_description>
          <details>Must be 0 if no CAMERA2_TRIGGER_AUTOFOCUS trigger
          received yet by HAL. Always updated even if AF algorithm
          ignores the trigger</details>
        </entry>
        <clone entry="android.control.awbLock" kind="controls">
        </clone>
        <clone entry="android.control.awbMode" kind="controls">
        </clone>
        <clone entry="android.control.awbRegions" kind="controls">
        </clone>
        <clone entry="android.control.captureIntent" kind="controls">
        </clone>
        <entry name="awbState" type="byte" visibility="public" enum="true"
               hwlevel="limited">
          <enum>
            <value>INACTIVE
            <notes>AWB is not in auto mode, or has not yet started metering.

            When a camera device is opened, it starts in this
            state. This is a transient state, the camera device may
            skip reporting this state in capture
            result.</notes></value>
            <value>SEARCHING
            <notes>AWB doesn't yet have a good set of control
            values for the current scene.

            This is a transient state, the camera device
            may skip reporting this state in capture result.</notes></value>
            <value>CONVERGED
            <notes>AWB has a good set of control values for the
            current scene.</notes></value>
            <value>LOCKED
            <notes>AWB has been locked.
            </notes></value>
          </enum>
          <description>Current state of auto-white balance (AWB) algorithm.</description>
          <details>Switching between or enabling AWB modes (android.control.awbMode) always
          resets the AWB state to INACTIVE. Similarly, switching between android.control.mode,
          or android.control.sceneMode if `android.control.mode == USE_SCENE_MODE` resets all
          the algorithm states to INACTIVE.

          The camera device can do several state transitions between two results, if it is
          allowed by the state transition table. So INACTIVE may never actually be seen in
          a result.

          The state in the result is the state for this image (in sync with this image): if
          AWB state becomes CONVERGED, then the image data associated with this result should
          be good to use.

          Below are state transition tables for different AWB modes.

          When `android.control.awbMode != AWB_MODE_AUTO`:

            State       | Transition Cause | New State | Notes
          :------------:|:----------------:|:---------:|:-----------------------:
          INACTIVE      |                  |INACTIVE   |Camera device auto white balance algorithm is disabled

          When android.control.awbMode is AWB_MODE_AUTO:

            State        | Transition Cause                 | New State     | Notes
          :-------------:|:--------------------------------:|:-------------:|:-----------------:
          INACTIVE       | Camera device initiates AWB scan | SEARCHING     | Values changing
          INACTIVE       | android.control.awbLock is ON    | LOCKED        | Values locked
          SEARCHING      | Camera device finishes AWB scan  | CONVERGED     | Good values, not changing
          SEARCHING      | android.control.awbLock is ON    | LOCKED        | Values locked
          CONVERGED      | Camera device initiates AWB scan | SEARCHING     | Values changing
          CONVERGED      | android.control.awbLock is ON    | LOCKED        | Values locked
          LOCKED         | android.control.awbLock is OFF   | SEARCHING     | Values not good after unlock

          For the above table, the camera device may skip reporting any state changes that happen
          without application intervention (i.e. mode switch, trigger, locking). Any state that
          can be skipped in that manner is called a transient state.

          For example, for this AWB mode (AWB_MODE_AUTO), in addition to the state transitions
          listed in above table, it is also legal for the camera device to skip one or more
          transient states between two results. See below table for examples:

            State        | Transition Cause                 | New State     | Notes
          :-------------:|:--------------------------------:|:-------------:|:-----------------:
          INACTIVE       | Camera device finished AWB scan  | CONVERGED     | Values are already good, transient states are skipped by camera device.
          LOCKED         | android.control.awbLock is OFF   | CONVERGED     | Values good after unlock, transient states are skipped by camera device.
          </details>
        </entry>
        <clone entry="android.control.effectMode" kind="controls">
        </clone>
        <clone entry="android.control.mode" kind="controls">
        </clone>
        <clone entry="android.control.sceneMode" kind="controls">
        </clone>
        <clone entry="android.control.videoStabilizationMode" kind="controls">
        </clone>
      </dynamic>
      <static>
        <entry name="availableHighSpeedVideoConfigurations" type="int32" visibility="hidden"
               container="array" typedef="highSpeedVideoConfiguration" hwlevel="limited">
          <array>
            <size>5</size>
            <size>n</size>
          </array>
          <description>
          List of available high speed video size, fps range and max batch size configurations
          supported by the camera device, in the format of (width, height, fps_min, fps_max, batch_size_max).
          </description>
          <range>
          For each configuration, the fps_max &amp;gt;= 120fps.
          </range>
          <details>
          When CONSTRAINED_HIGH_SPEED_VIDEO is supported in android.request.availableCapabilities,
          this metadata will list the supported high speed video size, fps range and max batch size
          configurations. All the sizes listed in this configuration will be a subset of the sizes
          reported by {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputSizes}
          for processed non-stalling formats.

          For the high speed video use case, the application must
          select the video size and fps range from this metadata to configure the recording and
          preview streams and setup the recording requests. For example, if the application intends
          to do high speed recording, it can select the maximum size reported by this metadata to
          configure output streams. Once the size is selected, application can filter this metadata
          by selected size and get the supported fps ranges, and use these fps ranges to setup the
          recording requests. Note that for the use case of multiple output streams, application
          must select one unique size from this metadata to use (e.g., preview and recording streams
          must have the same size). Otherwise, the high speed capture session creation will fail.

          The min and max fps will be multiple times of 30fps.

          High speed video streaming extends significant performance pressue to camera hardware,
          to achieve efficient high speed streaming, the camera device may have to aggregate
          multiple frames together and send to camera device for processing where the request
          controls are same for all the frames in this batch. Max batch size indicates
          the max possible number of frames the camera device will group together for this high
          speed stream configuration. This max batch size will be used to generate a high speed
          recording request list by
          {@link android.hardware.camera2.CameraConstrainedHighSpeedCaptureSession#createHighSpeedRequestList}.
          The max batch size for each configuration will satisfy below conditions:

          * Each max batch size will be a divisor of its corresponding fps_max / 30. For example,
          if max_fps is 300, max batch size will only be 1, 2, 5, or 10.
          * The camera device may choose smaller internal batch size for each configuration, but
          the actual batch size will be a divisor of max batch size. For example, if the max batch
          size is 8, the actual batch size used by camera device will only be 1, 2, 4, or 8.
          * The max batch size in each configuration entry must be no larger than 32.

          The camera device doesn't have to support batch mode to achieve high speed video recording,
          in such case, batch_size_max will be reported as 1 in each configuration entry.

          This fps ranges in this configuration list can only be used to create requests
          that are submitted to a high speed camera capture session created by
          {@link android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession}.
          The fps ranges reported in this metadata must not be used to setup capture requests for
          normal capture session, or it will cause request error.
          </details>
          <hal_details>
          All the sizes listed in this configuration will be a subset of the sizes reported by
          android.scaler.availableStreamConfigurations for processed non-stalling output formats.
          Note that for all high speed video configurations, HAL must be able to support a minimum
          of two streams, though the application might choose to configure just one stream.

          The HAL may support multiple sensor modes for high speed outputs, for example, 120fps
          sensor mode and 120fps recording, 240fps sensor mode for 240fps recording. The application
          usually starts preview first, then starts recording. To avoid sensor mode switch caused
          stutter when starting recording as much as possible, the application may want to ensure
          the same sensor mode is used for preview and recording. Therefore, The HAL must advertise
          the variable fps range [30, fps_max] for each fixed fps range in this configuration list.
          For example, if the HAL advertises [120, 120] and [240, 240], the HAL must also advertise
          [30, 120] and [30, 240] for each configuration. In doing so, if the application intends to
          do 120fps recording, it can select [30, 120] to start preview, and [120, 120] to start
          recording. For these variable fps ranges, it's up to the HAL to decide the actual fps
          values that are suitable for smooth preview streaming. If the HAL sees different max_fps
          values that fall into different sensor modes in a sequence of requests, the HAL must
          switch the sensor mode as quick as possible to minimize the mode switch caused stutter.
          </hal_details>
          <tag id="V1" />
        </entry>
        <entry name="aeLockAvailable" type="byte" visibility="public" enum="true"
               typedef="boolean" hwlevel="legacy">
          <enum>
            <value>FALSE</value>
            <value>TRUE</value>
          </enum>
          <description>Whether the camera device supports android.control.aeLock</description>
          <details>
              Devices with MANUAL_SENSOR capability or BURST_CAPTURE capability will always
              list `true`. This includes FULL devices.
          </details>
          <tag id="BC"/>
        </entry>
        <entry name="awbLockAvailable" type="byte" visibility="public" enum="true"
               typedef="boolean" hwlevel="legacy">
          <enum>
            <value>FALSE</value>
            <value>TRUE</value>
          </enum>
          <description>Whether the camera device supports android.control.awbLock</description>
          <details>
              Devices with MANUAL_POST_PROCESSING capability or BURST_CAPTURE capability will
              always list `true`. This includes FULL devices.
          </details>
          <tag id="BC"/>
        </entry>
        <entry name="availableModes" type="byte" visibility="public"
            type_notes="List of enums (android.control.mode)." container="array"
            typedef="enumList" hwlevel="legacy">
          <array>
            <size>n</size>
          </array>
          <description>
          List of control modes for android.control.mode that are supported by this camera
          device.
          </description>
          <range>Any value listed in android.control.mode</range>
          <details>
              This list contains control modes that can be set for the camera device.
              LEGACY mode devices will always support AUTO mode. LIMITED and FULL
              devices will always support OFF, AUTO modes.
          </details>
        </entry>
        <entry name="postRawSensitivityBoostRange" type="int32" visibility="public"
            type_notes="Range of supported post RAW sensitivitiy boosts"
            container="array" typedef="rangeInt">
          <array>
            <size>2</size>
          </array>
          <description>Range of boosts for android.control.postRawSensitivityBoost supported
            by this camera device.
          </description>
          <units>ISO arithmetic units, the same as android.sensor.sensitivity</units>
          <details>
            Devices support post RAW sensitivity boost  will advertise
            android.control.postRawSensitivityBoost key for controling
            post RAW sensitivity boost.

            This key will be `null` for devices that do not support any RAW format
            outputs. For devices that do support RAW format outputs, this key will always
            present, and if a device does not support post RAW sensitivity boost, it will
            list `(100, 100)` in this key.
          </details>
          <hal_details>
             This key is added in legacy HAL3.4. For legacy HAL3.3 or earlier devices, camera
             framework will generate this key as `(100, 100)` if device supports any of RAW output
             formats.  All legacy HAL3.4 and above devices should list this key if device supports
             any of RAW output formats.
          </hal_details>
        </entry>
      </static>
      <controls>
        <entry name="postRawSensitivityBoost" type="int32" visibility="public">
          <description>The amount of additional sensitivity boost applied to output images
             after RAW sensor data is captured.
          </description>
          <units>ISO arithmetic units, the same as android.sensor.sensitivity</units>
          <range>android.control.postRawSensitivityBoostRange</range>
          <details>
          Some camera devices support additional digital sensitivity boosting in the
          camera processing pipeline after sensor RAW image is captured.
          Such a boost will be applied to YUV/JPEG format output images but will not
          have effect on RAW output formats like RAW_SENSOR, RAW10, RAW12 or RAW_OPAQUE.

          This key will be `null` for devices that do not support any RAW format
          outputs. For devices that do support RAW format outputs, this key will always
          present, and if a device does not support post RAW sensitivity boost, it will
          list `100` in this key.

          If the camera device cannot apply the exact boost requested, it will reduce the
          boost to the nearest supported value.
          The final boost value used will be available in the output capture result.

          For devices that support post RAW sensitivity boost, the YUV/JPEG output images
          of such device will have the total sensitivity of
          `android.sensor.sensitivity * android.control.postRawSensitivityBoost / 100`
          The sensitivity of RAW format images will always be `android.sensor.sensitivity`

          This control is only effective if android.control.aeMode or android.control.mode is set to
          OFF; otherwise the auto-exposure algorithm will override this value.
          </details>
        </entry>
      </controls>
      <dynamic>
        <clone entry="android.control.postRawSensitivityBoost" kind="controls">
        </clone>
      </dynamic>
      <controls>
        <entry name="enableZsl" type="byte" visibility="public" enum="true" typedef="boolean">
          <enum>
            <value>FALSE
            <notes>Requests with android.control.captureIntent == STILL_CAPTURE must be captured
              after previous requests.</notes></value>
            <value>TRUE
            <notes>Requests with android.control.captureIntent == STILL_CAPTURE may or may not be
              captured before previous requests.</notes></value>
          </enum>
          <description>Allow camera device to enable zero-shutter-lag mode for requests with
            android.control.captureIntent == STILL_CAPTURE.
          </description>
          <details>
          If enableZsl is `true`, the camera device may enable zero-shutter-lag mode for requests with
          STILL_CAPTURE capture intent. The camera device may use images captured in the past to
          produce output images for a zero-shutter-lag request. The result metadata including the
          android.sensor.timestamp reflects the source frames used to produce output images.
          Therefore, the contents of the output images and the result metadata may be out of order
          compared to previous regular requests. enableZsl does not affect requests with other
          capture intents.

          For example, when requests are submitted in the following order:
            Request A: enableZsl is ON, android.control.captureIntent is PREVIEW
            Request B: enableZsl is ON, android.control.captureIntent is STILL_CAPTURE

          The output images for request B may have contents captured before the output images for
          request A, and the result metadata for request B may be older than the result metadata for
          request A.

          Note that when enableZsl is `true`, it is not guaranteed to get output images captured in
          the past for requests with STILL_CAPTURE capture intent.

          For applications targeting SDK versions O and newer, the value of enableZsl in
          TEMPLATE_STILL_CAPTURE template may be `true`. The value in other templates is always
          `false` if present.

          For applications targeting SDK versions older than O, the value of enableZsl in all
          capture templates is always `false` if present.

          For application-operated ZSL, use CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG template.
          </details>
          <hal_details>
          It is valid for HAL to produce regular output images for requests with STILL_CAPTURE
          capture intent.
          </hal_details>
        </entry>
      </controls>
      <dynamic>
        <clone entry="android.control.enableZsl" kind="controls">
        </clone>
        <entry name="afSceneChange" type="byte" visibility="public" enum="true" hal_version="3.3">
          <enum>
            <value>NOT_DETECTED
            <notes>Scene change is not detected within the AF region(s).</notes></value>
            <value>DETECTED
            <notes>Scene change is detected within the AF region(s).</notes></value>
          </enum>
          <description>Whether a significant scene change is detected within the currently-set AF
          region(s).</description>
          <details>When the camera focus routine detects a change in the scene it is looking at,
          such as a large shift in camera viewpoint, significant motion in the scene, or a
          significant illumination change, this value will be set to DETECTED for a single capture
          result. Otherwise the value will be NOT_DETECTED. The threshold for detection is similar
          to what would trigger a new passive focus scan to begin in CONTINUOUS autofocus modes.

          This key will be available if the camera device advertises this key via {@link
          android.hardware.camera2.CameraCharacteristics#getAvailableCaptureResultKeys|ACAMERA_REQUEST_AVAILABLE_RESULT_KEYS}.
          </details>
        </entry>
      </dynamic>
    </section>
    <section name="demosaic">
      <controls>
        <entry name="mode" type="byte" enum="true">
          <enum>
            <value>FAST
            <notes>Minimal or no slowdown of frame rate compared to
            Bayer RAW output.</notes></value>
            <value>HIGH_QUALITY
            <notes>Improved processing quality but the frame rate might be slowed down
            relative to raw output.</notes></value>
          </enum>
          <description>Controls the quality of the demosaicing
          processing.</description>
          <tag id="FUTURE" />
        </entry>
      </controls>
    </section>
    <section name="edge">
      <controls>
        <entry name="mode" type="byte" visibility="public" enum="true" hwlevel="full">
          <enum>
            <value>OFF
            <notes>No edge enhancement is applied.</notes></value>
            <value>FAST
            <notes>Apply edge enhancement at a quality level that does not slow down frame rate
            relative to sensor output. It may be the same as OFF if edge enhancement will
            slow down frame rate relative to sensor.</notes></value>
            <value>HIGH_QUALITY
            <notes>Apply high-quality edge enhancement, at a cost of possibly reduced output frame rate.
            </notes></value>
            <value optional="true">ZERO_SHUTTER_LAG <notes>Edge enhancement is applied at different
            levels for different output streams, based on resolution. Streams at maximum recording
            resolution (see {@link
            android.hardware.camera2.CameraDevice#createCaptureSession|ACameraDevice_createCaptureSession})
            or below have edge enhancement applied, while higher-resolution streams have no edge
            enhancement applied. The level of edge enhancement for low-resolution streams is tuned
            so that frame rate is not impacted, and the quality is equal to or better than FAST
            (since it is only applied to lower-resolution outputs, quality may improve from FAST).

            This mode is intended to be used by applications operating in a zero-shutter-lag mode
            with YUV or PRIVATE reprocessing, where the application continuously captures
            high-resolution intermediate buffers into a circular buffer, from which a final image is
            produced via reprocessing when a user takes a picture.  For such a use case, the
            high-resolution buffers must not have edge enhancement applied to maximize efficiency of
            preview and to avoid double-applying enhancement when reprocessed, while low-resolution
            buffers (used for recording or preview, generally) need edge enhancement applied for
            reasonable preview quality.

            This mode is guaranteed to be supported by devices that support either the
            YUV_REPROCESSING or PRIVATE_REPROCESSING capabilities
            (android.request.availableCapabilities lists either of those capabilities) and it will
            be the default mode for CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG template.
            </notes></value>
          </enum>
          <description>Operation mode for edge
          enhancement.</description>
          <range>android.edge.availableEdgeModes</range>
          <details>Edge enhancement improves sharpness and details in the captured image. OFF means
          no enhancement will be applied by the camera device.

          FAST/HIGH_QUALITY both mean camera device determined enhancement
          will be applied. HIGH_QUALITY mode indicates that the
          camera device will use the highest-quality enhancement algorithms,
          even if it slows down capture rate. FAST means the camera device will
          not slow down capture rate when applying edge enhancement. FAST may be the same as OFF if
          edge enhancement will slow down capture rate. Every output stream will have a similar
          amount of enhancement applied.

          ZERO_SHUTTER_LAG is meant to be used by applications that maintain a continuous circular
          buffer of high-resolution images during preview and reprocess image(s) from that buffer
          into a final capture when triggered by the user. In this mode, the camera device applies
          edge enhancement to low-resolution streams (below maximum recording resolution) to
          maximize preview quality, but does not apply edge enhancement to high-resolution streams,
          since those will be reprocessed later if necessary.

          For YUV_REPROCESSING, these FAST/HIGH_QUALITY modes both mean that the camera
          device will apply FAST/HIGH_QUALITY YUV-domain edge enhancement, respectively.
          The camera device may adjust its internal edge enhancement parameters for best
          image quality based on the android.reprocess.effectiveExposureFactor, if it is set.
          </details>
          <hal_details>
          For YUV_REPROCESSING The HAL can use android.reprocess.effectiveExposureFactor to
          adjust the internal edge enhancement reduction parameters appropriately to get the best
          quality images.
          </hal_details>
          <tag id="V1" />
          <tag id="REPROC" />
        </entry>
        <entry name="strength" type="byte">
          <description>Control the amount of edge enhancement
          applied to the images</description>
          <units>1-10; 10 is maximum sharpening</units>
          <tag id="FUTURE" />
        </entry>
      </controls>
      <static>
        <entry name="availableEdgeModes" type="byte" visibility="public"
               type_notes="list of enums" container="array" typedef="enumList"
               hwlevel="full">
          <array>
            <size>n</size>
          </array>
          <description>
          List of edge enhancement modes for android.edge.mode that are supported by this camera
          device.
          </description>
          <range>Any value listed in android.edge.mode</range>
          <details>
          Full-capability camera devices must always support OFF; camera devices that support
          YUV_REPROCESSING or PRIVATE_REPROCESSING will list ZERO_SHUTTER_LAG; all devices will
          list FAST.
          </details>
          <hal_details>
          HAL must support both FAST and HIGH_QUALITY if edge enhancement control is available
          on the camera device, but the underlying implementation can be the same for both modes.
          That is, if the highest quality implementation on the camera device does not slow down
          capture rate, then FAST and HIGH_QUALITY will generate the same output.
          </hal_details>
          <tag id="V1" />
          <tag id="REPROC" />
        </entry>
      </static>
      <dynamic>
        <clone entry="android.edge.mode" kind="controls">
          <tag id="V1" />
          <tag id="REPROC" />
        </clone>
      </dynamic>
    </section>
    <section name="flash">
      <controls>
        <entry name="firingPower" type="byte">
          <description>Power for flash firing/torch</description>
          <units>10 is max power; 0 is no flash. Linear</units>
          <range>0 - 10</range>
          <details>Power for snapshot may use a different scale than
          for torch mode. Only one entry for torch mode will be
          used</details>
          <tag id="FUTURE" />
        </entry>
        <entry name="firingTime" type="int64">
          <description>Firing time of flash relative to start of
          exposure</description>
          <units>nanoseconds</units>
          <range>0-(exposure time-flash duration)</range>
          <details>Clamped to (0, exposure time - flash
          duration).</details>
          <tag id="FUTURE" />
        </entry>
        <entry name="mode" type="byte" visibility="public" enum="true" hwlevel="legacy">
          <enum>
            <value>OFF
              <notes>
              Do not fire the flash for this capture.
              </notes>
            </value>
            <value>SINGLE
              <notes>
              If the flash is available and charged, fire flash
              for this capture.
              </notes>
            </value>
            <value>TORCH
              <notes>
              Transition flash to continuously on.
              </notes>
            </value>
          </enum>
          <description>The desired mode for for the camera device's flash control.</description>
          <details>
          This control is only effective when flash unit is available
          (`android.flash.info.available == true`).

          When this control is used, the android.control.aeMode must be set to ON or OFF.
          Otherwise, the camera device auto-exposure related flash control (ON_AUTO_FLASH,
          ON_ALWAYS_FLASH, or ON_AUTO_FLASH_REDEYE) will override this control.

          When set to OFF, the camera device will not fire flash for this capture.

          When set to SINGLE, the camera device will fire flash regardless of the camera
          device's auto-exposure routine's result. When used in still capture case, this
          control should be used along with auto-exposure (AE) precapture metering sequence
          (android.control.aePrecaptureTrigger), otherwise, the image may be incorrectly exposed.

          When set to TORCH, the flash will be on continuously. This mode can be used
          for use cases such as preview, auto-focus assist, still capture, or video recording.

          The flash status will be reported by android.flash.state in the capture result metadata.
          </details>
          <tag id="BC" />
        </entry>
      </controls>
      <static>
        <namespace name="info">
          <entry name="available" type="byte" visibility="public" enum="true"
                 typedef="boolean" hwlevel="legacy">
            <enum>
              <value>FALSE</value>
              <value>TRUE</value>
            </enum>
            <description>Whether this camera device has a
            flash unit.</description>
            <details>
            Will be `false` if no flash is available.

            If there is no flash unit, none of the flash controls do
            anything.</details>
            <tag id="BC" />
          </entry>
          <entry name="chargeDuration" type="int64">
            <description>Time taken before flash can fire
            again</description>
            <units>nanoseconds</units>
            <range>0-1e9</range>
            <details>1 second too long/too short for recharge? Should
            this be power-dependent?</details>
            <tag id="FUTURE" />
          </entry>
        </namespace>
        <entry name="colorTemperature" type="byte">
          <description>The x,y whitepoint of the
          flash</description>
          <units>pair of floats</units>
          <range>0-1 for both</range>
          <tag id="FUTURE" />
        </entry>
        <entry name="maxEnergy" type="byte">
          <description>Max energy output of the flash for a full
          power single flash</description>
          <units>lumen-seconds</units>
          <range>&amp;gt;= 0</range>
          <tag id="FUTURE" />
        </entry>
      </static>
      <dynamic>
        <clone entry="android.flash.firingPower" kind="controls">
        </clone>
        <clone entry="android.flash.firingTime" kind="controls">
        </clone>
        <clone entry="android.flash.mode" kind="controls"></clone>
        <entry name="state" type="byte" visibility="public" enum="true"
               hwlevel="limited">
          <enum>
            <value>UNAVAILABLE
            <notes>No flash on camera.</notes></value>
            <value>CHARGING
            <notes>Flash is charging and cannot be fired.</notes></value>
            <value>READY
            <notes>Flash is ready to fire.</notes></value>
            <value>FIRED
            <notes>Flash fired for this capture.</notes></value>
            <value>PARTIAL
            <notes>Flash partially illuminated this frame.

            This is usually due to the next or previous frame having
            the flash fire, and the flash spilling into this capture
            due to hardware limitations.</notes></value>
          </enum>
          <description>Current state of the flash
          unit.</description>
          <details>
          When the camera device doesn't have flash unit
          (i.e. `android.flash.info.available == false`), this state will always be UNAVAILABLE.
          Other states indicate the current flash status.

          In certain conditions, this will be available on LEGACY devices:

           * Flash-less cameras always return UNAVAILABLE.
           * Using android.control.aeMode `==` ON_ALWAYS_FLASH
             will always return FIRED.
           * Using android.flash.mode `==` TORCH
             will always return FIRED.

          In all other conditions the state will not be available on
          LEGACY devices (i.e. it will be `null`).
          </details>
        </entry>
      </dynamic>
    </section>
    <section name="hotPixel">
      <controls>
        <entry name="mode" type="byte" visibility="public" enum="true">
          <enum>
            <value>OFF
              <notes>
              No hot pixel correction is applied.

              The frame rate must not be reduced relative to sensor raw output
              for this option.

              The hotpixel map may be returned in android.statistics.hotPixelMap.
              </notes>
            </value>
            <value>FAST
              <notes>
              Hot pixel correction is applied, without reducing frame
              rate relative to sensor raw output.

              The hotpixel map may be returned in android.statistics.hotPixelMap.
              </notes>
            </value>
            <value>HIGH_QUALITY
              <notes>
              High-quality hot pixel correction is applied, at a cost
              of possibly reduced frame rate relative to sensor raw output.

              The hotpixel map may be returned in android.statistics.hotPixelMap.
              </notes>
            </value>
          </enum>
          <description>
          Operational mode for hot pixel correction.
          </description>
          <range>android.hotPixel.availableHotPixelModes</range>
          <details>
          Hotpixel correction interpolates out, or otherwise removes, pixels
          that do not accurately measure the incoming light (i.e. pixels that
          are stuck at an arbitrary value or are oversensitive).
          </details>
          <tag id="V1" />
          <tag id="RAW" />
        </entry>
      </controls>
      <static>
        <entry name="availableHotPixelModes" type="byte" visibility="public"
          type_notes="list of enums" container="array" typedef="enumList">
          <array>
            <size>n</size>
          </array>
          <description>
          List of hot pixel correction modes for android.hotPixel.mode that are supported by this
          camera device.
          </description>
          <range>Any value listed in android.hotPixel.mode</range>
          <details>
          FULL mode camera devices will always support FAST.
          </details>
          <hal_details>
          To avoid performance issues, there will be significantly fewer hot
          pixels than actual pixels on the camera sensor.
          HAL must support both FAST and HIGH_QUALITY if hot pixel correction control is available
          on the camera device, but the underlying implementation can be the same for both modes.
          That is, if the highest quality implementation on the camera device does not slow down
          capture rate, then FAST and HIGH_QUALITY will generate the same output.
          </hal_details>
          <tag id="V1" />
          <tag id="RAW" />
        </entry>
      </static>
      <dynamic>
        <clone entry="android.hotPixel.mode" kind="controls">
          <tag id="V1" />
          <tag id="RAW" />
        </clone>
      </dynamic>
    </section>
    <section name="jpeg">
      <controls>
        <entry name="gpsLocation" type="byte" visibility="java_public" synthetic="true"
        typedef="location" hwlevel="legacy">
          <description>
          A location object to use when generating image GPS metadata.
          </description>
          <details>
          Setting a location object in a request will include the GPS coordinates of the location
          into any JPEG images captured based on the request. These coordinates can then be
          viewed by anyone who receives the JPEG image.
          </details>
        </entry>
        <entry name="gpsCoordinates" type="double" visibility="ndk_public"
        type_notes="latitude, longitude, altitude. First two in degrees, the third in meters"
        container="array" hwlevel="legacy">
          <array>
            <size>3</size>
          </array>
          <description>GPS coordinates to include in output JPEG
          EXIF.</description>
          <range>(-180 - 180], [-90,90], [-inf, inf]</range>
          <tag id="BC" />
        </entry>
        <entry name="gpsProcessingMethod" type="byte" visibility="ndk_public"
               typedef="string" hwlevel="legacy">
          <description>32 characters describing GPS algorithm to
          include in EXIF.</description>
          <units>UTF-8 null-terminated string</units>
          <tag id="BC" />
        </entry>
        <entry name="gpsTimestamp" type="int64" visibility="ndk_public" hwlevel="legacy">
          <description>Time GPS fix was made to include in
          EXIF.</description>
          <units>UTC in seconds since January 1, 1970</units>
          <tag id="BC" />
        </entry>
        <entry name="orientation" type="int32" visibility="public" hwlevel="legacy">
          <description>The orientation for a JPEG image.</description>
          <units>Degrees in multiples of 90</units>
          <range>0, 90, 180, 270</range>
          <details>
          The clockwise rotation angle in degrees, relative to the orientation
          to the camera, that the JPEG picture needs to be rotated by, to be viewed
          upright.

          Camera devices may either encode this value into the JPEG EXIF header, or
          rotate the image data to match this orientation. When the image data is rotated,
          the thumbnail data will also be rotated.

          Note that this orientation is relative to the orientation of the camera sensor, given
          by android.sensor.orientation.

          To translate from the device orientation given by the Android sensor APIs for camera
          sensors which are not EXTERNAL, the following sample code may be used:

              private int getJpegOrientation(CameraCharacteristics c, int deviceOrientation) {
                  if (deviceOrientation == android.view.OrientationEventListener.ORIENTATION_UNKNOWN) return 0;
                  int sensorOrientation = c.get(CameraCharacteristics.SENSOR_ORIENTATION);

                  // Round device orientation to a multiple of 90
                  deviceOrientation = (deviceOrientation + 45) / 90 * 90;

                  // Reverse device orientation for front-facing cameras
                  boolean facingFront = c.get(CameraCharacteristics.LENS_FACING) == CameraCharacteristics.LENS_FACING_FRONT;
                  if (facingFront) deviceOrientation = -deviceOrientation;

                  // Calculate desired JPEG orientation relative to camera orientation to make
                  // the image upright relative to the device orientation
                  int jpegOrientation = (sensorOrientation + deviceOrientation + 360) % 360;

                  return jpegOrientation;
              }

          For EXTERNAL cameras the sensor orientation will always be set to 0 and the facing will
          also be set to EXTERNAL. The above code is not relevant in such case.
          </details>
          <tag id="BC" />
        </entry>
        <entry name="quality" type="byte" visibility="public" hwlevel="legacy">
          <description>Compression quality of the final JPEG
          image.</description>
          <range>1-100; larger is higher quality</range>
          <details>85-95 is typical usage range.</details>
          <tag id="BC" />
        </entry>
        <entry name="thumbnailQuality" type="byte" visibility="public" hwlevel="legacy">
          <description>Compression quality of JPEG
          thumbnail.</description>
          <range>1-100; larger is higher quality</range>
          <tag id="BC" />
        </entry>
        <entry name="thumbnailSize" type="int32" visibility="public"
        container="array" typedef="size" hwlevel="legacy">
          <array>
            <size>2</size>
          </array>
          <description>Resolution of embedded JPEG thumbnail.</description>
          <range>android.jpeg.availableThumbnailSizes</range>
          <details>When set to (0, 0) value, the JPEG EXIF will not contain thumbnail,
          but the captured JPEG will still be a valid image.

          For best results, when issuing a request for a JPEG image, the thumbnail size selected
          should have the same aspect ratio as the main JPEG output.

          If the thumbnail image aspect ratio differs from the JPEG primary image aspect
          ratio, the camera device creates the thumbnail by cropping it from the primary image.
          For example, if the primary image has 4:3 aspect ratio, the thumbnail image has
          16:9 aspect ratio, the primary image will be cropped vertically (letterbox) to
          generate the thumbnail image. The thumbnail image will always have a smaller Field
          Of View (FOV) than the primary image when aspect ratios differ.

          When an android.jpeg.orientation of non-zero degree is requested,
          the camera device will handle thumbnail rotation in one of the following ways:

          * Set the {@link android.media.ExifInterface#TAG_ORIENTATION EXIF orientation flag}
            and keep jpeg and thumbnail image data unrotated.
          * Rotate the jpeg and thumbnail image data and not set
            {@link android.media.ExifInterface#TAG_ORIENTATION EXIF orientation flag}. In this
            case, LIMITED or FULL hardware level devices will report rotated thumnail size in
            capture result, so the width and height will be interchanged if 90 or 270 degree
            orientation is requested. LEGACY device will always report unrotated thumbnail
            size.
          </details>
          <hal_details>
          The HAL must not squeeze or stretch the downscaled primary image to generate thumbnail.
          The cropping must be done on the primary jpeg image rather than the sensor active array.
          The stream cropping rule specified by "S5. Cropping" in camera3.h doesn't apply to the
          thumbnail image cropping.
          </hal_details>
          <tag id="BC" />
        </entry>
      </controls>
      <static>
        <entry name="availableThumbnailSizes" type="int32" visibility="public"
        container="array" typedef="size" hwlevel="legacy">
          <array>
            <size>2</size>
            <size>n</size>
          </array>
          <description>List of JPEG thumbnail sizes for android.jpeg.thumbnailSize supported by this
          camera device.</description>
          <details>
          This list will include at least one non-zero resolution, plus `(0,0)` for indicating no
          thumbnail should be generated.

          Below condiditions will be satisfied for this size list:

          * The sizes will be sorted by increasing pixel area (width x height).
          If several resolutions have the same area, they will be sorted by increasing width.
          * The aspect ratio of the largest thumbnail size will be same as the
          aspect ratio of largest JPEG output size in android.scaler.availableStreamConfigurations.
          The largest size is defined as the size that has the largest pixel area
          in a given size list.
          * Each output JPEG size in android.scaler.availableStreamConfigurations will have at least
          one corresponding size that has the same aspect ratio in availableThumbnailSizes,
          and vice versa.
          * All non-`(0, 0)` sizes will have non-zero widths and heights.</details>
          <tag id="BC" />
        </entry>
        <entry name="maxSize" type="int32" visibility="system">
          <description>Maximum size in bytes for the compressed
          JPEG buffer</description>
          <range>Must be large enough to fit any JPEG produced by
          the camera</range>
          <details>This is used for sizing the gralloc buffers for
          JPEG</details>
        </entry>
      </static>
      <dynamic>
        <clone entry="android.jpeg.gpsLocation" kind="controls">
        </clone>
        <clone entry="android.jpeg.gpsCoordinates" kind="controls">
        </clone>
        <clone entry="android.jpeg.gpsProcessingMethod"
        kind="controls"></clone>
        <clone entry="android.jpeg.gpsTimestamp" kind="controls">
        </clone>
        <clone entry="android.jpeg.orientation" kind="controls">
        </clone>
        <clone entry="android.jpeg.quality" kind="controls">
        </clone>
        <entry name="size" type="int32">
          <description>The size of the compressed JPEG image, in
          bytes</description>
          <range>&amp;gt;= 0</range>
          <details>If no JPEG output is produced for the request,
          this must be 0.

          Otherwise, this describes the real size of the compressed
          JPEG image placed in the output stream.  More specifically,
          if android.jpeg.maxSize = 1000000, and a specific capture
          has android.jpeg.size = 500000, then the output buffer from
          the JPEG stream will be 1000000 bytes, of which the first
          500000 make up the real data.</details>
          <tag id="FUTURE" />
        </entry>
        <clone entry="android.jpeg.thumbnailQuality"
        kind="controls"></clone>
        <clone entry="android.jpeg.thumbnailSize" kind="controls">
        </clone>
      </dynamic>
    </section>
    <section name="lens">
      <controls>
        <entry name="aperture" type="float" visibility="public" hwlevel="full">
          <description>The desired lens aperture size, as a ratio of lens focal length to the
          effective aperture diameter.</description>
          <units>The f-number (f/N)</units>
          <range>android.lens.info.availableApertures</range>
          <details>Setting this value is only supported on the camera devices that have a variable
          aperture lens.

          When this is supported and android.control.aeMode is OFF,
          this can be set along with android.sensor.exposureTime,
          android.sensor.sensitivity, and android.sensor.frameDuration
          to achieve manual exposure control.

          The requested aperture value may take several frames to reach the
          requested value; the camera device will report the current (intermediate)
          aperture size in capture result metadata while the aperture is changing.
          While the aperture is still changing, android.lens.state will be set to MOVING.

          When this is supported and android.control.aeMode is one of
          the ON modes, this will be overridden by the camera device
          auto-exposure algorithm, the overridden values are then provided
          back to the user in the corresponding result.</details>
          <tag id="V1" />
        </entry>
        <entry name="filterDensity" type="float" visibility="public" hwlevel="full">
          <description>
          The desired setting for the lens neutral density filter(s).
          </description>
          <units>Exposure Value (EV)</units>
          <range>android.lens.info.availableFilterDensities</range>
          <details>
          This control will not be supported on most camera devices.

          Lens filters are typically used to lower the amount of light the
          sensor is exposed to (measured in steps of EV). As used here, an EV
          step is the standard logarithmic representation, which are
          non-negative, and inversely proportional to the amount of light
          hitting the sensor.  For example, setting this to 0 would result
          in no reduction of the incoming light, and setting this to 2 would
          mean that the filter is set to reduce incoming light by two stops
          (allowing 1/4 of the prior amount of light to the sensor).

          It may take several frames before the lens filter density changes
          to the requested value. While the filter density is still changing,
          android.lens.state will be set to MOVING.
          </details>
          <tag id="V1" />
        </entry>
        <entry name="focalLength" type="float" visibility="public" hwlevel="legacy">
          <description>
          The desired lens focal length; used for optical zoom.
          </description>
          <units>Millimeters</units>
          <range>android.lens.info.availableFocalLengths</range>
          <details>
          This setting controls the physical focal length of the camera
          device's lens. Changing the focal length changes the field of
          view of the camera device, and is usually used for optical zoom.

          Like android.lens.focusDistance and android.lens.aperture, this
          setting won't be applied instantaneously, and it may take several
          frames before the lens can change to the requested focal length.
          While the focal length is still changing, android.lens.state will
          be set to MOVING.

          Optical zoom will not be supported on most devices.
          </details>
          <tag id="V1" />
        </entry>
        <entry name="focusDistance" type="float" visibility="public" hwlevel="full">
          <description>Desired distance to plane of sharpest focus,
          measured from frontmost surface of the lens.</description>
          <units>See android.lens.info.focusDistanceCalibration for details</units>
          <range>&amp;gt;= 0</range>
          <details>
          This control can be used for setting manual focus, on devices that support
          the MANUAL_SENSOR capability and have a variable-focus lens (see
          android.lens.info.minimumFocusDistance).

          A value of `0.0f` means infinity focus. The value set will be clamped to
          `[0.0f, android.lens.info.minimumFocusDistance]`.

          Like android.lens.focalLength, this setting won't be applied
          instantaneously, and it may take several frames before the lens
          can move to the requested focus distance. While the lens is still moving,
          android.lens.state will be set to MOVING.

          LEGACY devices support at most setting this to `0.0f`
          for infinity focus.
          </details>
          <tag id="BC" />
          <tag id="V1" />
        </entry>
        <entry name="opticalStabilizationMode" type="byte" visibility="public"
        enum="true" hwlevel="limited">
          <enum>
            <value>OFF
              <notes>Optical stabilization is unavailable.</notes>
            </value>
            <value optional="true">ON
              <notes>Optical stabilization is enabled.</notes>
            </value>
          </enum>
          <description>
          Sets whether the camera device uses optical image stabilization (OIS)
          when capturing images.
          </description>
          <range>android.lens.info.availableOpticalStabilization</range>
          <details>
          OIS is used to compensate for motion blur due to small
          movements of the camera during capture. Unlike digital image
          stabilization (android.control.videoStabilizationMode), OIS
          makes use of mechanical elements to stabilize the camera
          sensor, and thus allows for longer exposure times before
          camera shake becomes apparent.

          Switching between different optical stabilization modes may take several
          frames to initialize, the camera device will report the current mode in
          capture result metadata. For example, When "ON" mode is requested, the
          optical stabilization modes in the first several capture results may still
          be "OFF", and it will become "ON" when the initialization is done.

          If a camera device supports both OIS and digital image stabilization
          (android.control.videoStabilizationMode), turning both modes on may produce undesirable
          interaction, so it is recommended not to enable both at the same time.

          Not all devices will support OIS; see
          android.lens.info.availableOpticalStabilization for
          available controls.
          </details>
          <tag id="V1" />
        </entry>
      </controls>
      <static>
        <namespace name="info">
          <entry name="availableApertures" type="float" visibility="public"
          container="array" hwlevel="full">
            <array>
              <size>n</size>
            </array>
            <description>List of aperture size values for android.lens.aperture that are
            supported by this camera device.</description>
            <units>The aperture f-number</units>
            <details>If the camera device doesn't support a variable lens aperture,
            this list will contain only one value, which is the fixed aperture size.

            If the camera device supports a variable aperture, the aperture values
            in this list will be sorted in ascending order.</details>
            <tag id="V1" />
          </entry>
          <entry name="availableFilterDensities" type="float" visibility="public"
          container="array" hwlevel="full">
            <array>
              <size>n</size>
            </array>
            <description>
            List of neutral density filter values for
            android.lens.filterDensity that are supported by this camera device.
            </description>
            <units>Exposure value (EV)</units>
            <range>
            Values are &amp;gt;= 0
            </range>
            <details>
            If a neutral density filter is not supported by this camera device,
            this list will contain only 0. Otherwise, this list will include every
            filter density supported by the camera device, in ascending order.
            </details>
            <tag id="V1" />
          </entry>
          <entry name="availableFocalLengths" type="float" visibility="public"
          type_notes="The list of available focal lengths"
          container="array" hwlevel="legacy">
            <array>
              <size>n</size>
            </array>
            <description>
            List of focal lengths for android.lens.focalLength that are supported by this camera
            device.
            </description>
            <units>Millimeters</units>
            <range>
            Values are &amp;gt; 0
            </range>
            <details>
            If optical zoom is not supported, this list will only contain
            a single value corresponding to the fixed focal length of the
            device. Otherwise, this list will include every focal length supported
            by the camera device, in ascending order.
            </details>
            <tag id="BC" />
            <tag id="V1" />
          </entry>
          <entry name="availableOpticalStabilization" type="byte"
          visibility="public" type_notes="list of enums" container="array"
          typedef="enumList" hwlevel="limited">
            <array>
              <size>n</size>
            </array>
            <description>
            List of optical image stabilization (OIS) modes for
            android.lens.opticalStabilizationMode that are supported by this camera device.
            </description>
            <range>Any value listed in android.lens.opticalStabilizationMode</range>
            <details>
            If OIS is not supported by a given camera device, this list will
            contain only OFF.
            </details>
            <tag id="V1" />
          </entry>
          <entry name="hyperfocalDistance" type="float" visibility="public" optional="true"
                 hwlevel="limited">
            <description>Hyperfocal distance for this lens.</description>
            <units>See android.lens.info.focusDistanceCalibration for details</units>
            <range>If lens is fixed focus, &amp;gt;= 0. If lens has focuser unit, the value is
            within `(0.0f, android.lens.info.minimumFocusDistance]`</range>
            <details>
            If the lens is not fixed focus, the camera device will report this
            field when android.lens.info.focusDistanceCalibration is APPROXIMATE or CALIBRATED.
            </details>
          </entry>
          <entry name="minimumFocusDistance" type="float" visibility="public" optional="true"
                 hwlevel="limited">
            <description>Shortest distance from frontmost surface
            of the lens that can be brought into sharp focus.</description>
            <units>See android.lens.info.focusDistanceCalibration for details</units>
            <range>&amp;gt;= 0</range>
            <details>If the lens is fixed-focus, this will be
            0.</details>
            <hal_details>Mandatory for FULL devices; LIMITED devices
            must always set this value to 0 for fixed-focus; and may omit
            the minimum focus distance otherwise.

            This field is also mandatory for all devices advertising
            the MANUAL_SENSOR capability.</hal_details>
            <tag id="V1" />
          </entry>
          <entry name="shadingMapSize" type="int32" visibility="ndk_public"
                 type_notes="width and height (N, M) of lens shading map provided by the camera device."
                 container="array" typedef="size" hwlevel="full">
            <array>
              <size>2</size>
            </array>
            <description>Dimensions of lens shading map.</description>
            <range>Both values &amp;gt;= 1</range>
            <details>
            The map should be on the order of 30-40 rows and columns, and
            must be smaller than 64x64.
            </details>
            <tag id="V1" />
          </entry>
          <entry name="focusDistanceCalibration" type="byte" visibility="public"
                 enum="true" hwlevel="limited">
            <enum>
              <value>UNCALIBRATED
                <notes>
                The lens focus distance is not accurate, and the units used for
                android.lens.focusDistance do not correspond to any physical units.

                Setting the lens to the same focus distance on separate occasions may
                result in a different real focus distance, depending on factors such
                as the orientation of the device, the age of the focusing mechanism,
                and the device temperature. The focus distance value will still be
                in the range of `[0, android.lens.info.minimumFocusDistance]`, where 0
                represents the farthest focus.
                </notes>
              </value>
              <value>APPROXIMATE
                <notes>
                The lens focus distance is measured in diopters.

                However, setting the lens to the same focus distance
                on separate occasions may result in a different real
                focus distance, depending on factors such as the
                orientation of the device, the age of the focusing
                mechanism, and the device temperature.
                </notes>
              </value>
              <value>CALIBRATED
                <notes>
                The lens focus distance is measured in diopters, and
                is calibrated.

                The lens mechanism is calibrated so that setting the
                same focus distance is repeatable on multiple
                occasions with good accuracy, and the focus distance
                corresponds to the real physical distance to the plane
                of best focus.
                </notes>
              </value>
            </enum>
            <description>The lens focus distance calibration quality.</description>
            <details>
            The lens focus distance calibration quality determines the reliability of
            focus related metadata entries, i.e. android.lens.focusDistance,
            android.lens.focusRange, android.lens.info.hyperfocalDistance, and
            android.lens.info.minimumFocusDistance.

            APPROXIMATE and CALIBRATED devices report the focus metadata in
            units of diopters (1/meter), so `0.0f` represents focusing at infinity,
            and increasing positive numbers represent focusing closer and closer
            to the camera device. The focus distance control also uses diopters
            on these devices.

            UNCALIBRATED devices do not use units that are directly comparable
            to any real physical measurement, but `0.0f` still represents farthest
            focus, and android.lens.info.minimumFocusDistance represents the
            nearest focus the device can achieve.
            </details>
            <hal_details>
            For devices advertise APPROXIMATE quality or higher, diopters 0 (infinity
            focus) must work. When autofocus is disabled (android.control.afMode == OFF)
            and the lens focus distance is set to 0 diopters
            (android.lens.focusDistance == 0), the lens will move to focus at infinity
            and is stably focused at infinity even if the device tilts. It may take the
            lens some time to move; during the move the lens state should be MOVING and
            the output diopter value should be changing toward 0.
            </hal_details>
          <tag id="V1" />
        </entry>
        </namespace>
        <entry name="facing" type="byte" visibility="public" enum="true" hwlevel="legacy">
          <enum>
            <value>FRONT
            <notes>
              The camera device faces the same direction as the device's screen.
            </notes></value>
            <value>BACK
            <notes>
              The camera device faces the opposite direction as the device's screen.
            </notes></value>
            <value>EXTERNAL
            <notes>
              The camera device is an external camera, and has no fixed facing relative to the
              device's screen.
            </notes></value>
          </enum>
          <description>Direction the camera faces relative to
          device screen.</description>
        </entry>
        <entry name="poseRotation" type="float" visibility="public"
               container="array">
          <array>
            <size>4</size>
          </array>
          <description>
            The orientation of the camera relative to the sensor
            coordinate system.
          </description>
          <units>
            Quaternion coefficients
          </units>
          <details>
            The four coefficients that describe the quaternion
            rotation from the Android sensor coordinate system to a
            camera-aligned coordinate system where the X-axis is
            aligned with the long side of the image sensor, the Y-axis
            is aligned with the short side of the image sensor, and
            the Z-axis is aligned with the optical axis of the sensor.

            To convert from the quaternion coefficients `(x,y,z,w)`
            to the axis of rotation `(a_x, a_y, a_z)` and rotation
            amount `theta`, the following formulas can be used:

                 theta = 2 * acos(w)
                a_x = x / sin(theta/2)
                a_y = y / sin(theta/2)
                a_z = z / sin(theta/2)

            To create a 3x3 rotation matrix that applies the rotation
            defined by this quaternion, the following matrix can be
            used:

                R = [ 1 - 2y^2 - 2z^2,       2xy - 2zw,       2xz + 2yw,
                           2xy + 2zw, 1 - 2x^2 - 2z^2,       2yz - 2xw,
                           2xz - 2yw,       2yz + 2xw, 1 - 2x^2 - 2y^2 ]

             This matrix can then be used to apply the rotation to a
             column vector point with

               `p' = Rp`

             where `p` is in the device sensor coordinate system, and
             `p'` is in the camera-oriented coordinate system.
          </details>
          <tag id="DEPTH" />
        </entry>
        <entry name="poseTranslation" type="float" visibility="public"
               container="array">
          <array>
            <size>3</size>
          </array>
          <description>Position of the camera optical center.</description>
          <units>Meters</units>
          <details>
            The position of the camera device's lens optical center,
            as a three-dimensional vector `(x,y,z)`.

            Prior to Android P, or when android.lens.poseReference is PRIMARY_CAMERA, this position
            is relative to the optical center of the largest camera device facing in the same
            direction as this camera, in the {@link android.hardware.SensorEvent Android sensor
            coordinate axes}. Note that only the axis definitions are shared with the sensor
            coordinate system, but not the origin.

            If this device is the largest or only camera device with a given facing, then this
            position will be `(0, 0, 0)`; a camera device with a lens optical center located 3 cm
            from the main sensor along the +X axis (to the right from the user's perspective) will
            report `(0.03, 0, 0)`.

            To transform a pixel coordinates between two cameras facing the same direction, first
            the source camera android.lens.distortion must be corrected for.  Then the source
            camera android.lens.intrinsicCalibration needs to be applied, followed by the
            android.lens.poseRotation of the source camera, the translation of the source camera
            relative to the destination camera, the android.lens.poseRotation of the destination
            camera, and finally the inverse of android.lens.intrinsicCalibration of the destination
            camera. This obtains a radial-distortion-free coordinate in the destination camera pixel
            coordinates.

            To compare this against a real image from the destination camera, the destination camera
            image then needs to be corrected for radial distortion before comparison or sampling.

            When android.lens.poseReference is GYROSCOPE, then this position is relative to
            the center of the primary gyroscope on the device.
          </details>
          <tag id="DEPTH" />
        </entry>
      </static>
      <dynamic>
        <clone entry="android.lens.aperture" kind="controls">
          <tag id="V1" />
        </clone>
        <clone entry="android.lens.filterDensity" kind="controls">
          <tag id="V1" />
        </clone>
        <clone entry="android.lens.focalLength" kind="controls">
          <tag id="BC" />
        </clone>
        <clone entry="android.lens.focusDistance" kind="controls">
          <details>Should be zero for fixed-focus cameras</details>
          <tag id="BC" />
        </clone>
        <entry name="focusRange" type="float" visibility="public"
        type_notes="Range of scene distances that are in focus"
        container="array" typedef="pairFloatFloat" hwlevel="limited">
          <array>
            <size>2</size>
          </array>
          <description>The range of scene distances that are in
          sharp focus (depth of field).</description>
          <units>A pair of focus distances in diopters: (near,
          far); see android.lens.info.focusDistanceCalibration for details.</units>
          <range>&amp;gt;=0</range>
          <details>If variable focus not supported, can still report
          fixed depth of field range</details>
          <tag id="BC" />
        </entry>
        <clone entry="android.lens.opticalStabilizationMode"
        kind="controls">
          <tag id="V1" />
        </clone>
        <entry name="state" type="byte" visibility="public" enum="true" hwlevel="limited">
          <enum>
            <value>STATIONARY
              <notes>
              The lens parameters (android.lens.focalLength, android.lens.focusDistance,
              android.lens.filterDensity and android.lens.aperture) are not changing.
              </notes>
            </value>
            <value>MOVING
              <notes>
              One or several of the lens parameters
              (android.lens.focalLength, android.lens.focusDistance,
              android.lens.filterDensity or android.lens.aperture) is
              currently changing.
              </notes>
            </value>
          </enum>
          <description>Current lens status.</description>
          <details>
          For lens parameters android.lens.focalLength, android.lens.focusDistance,
          android.lens.filterDensity and android.lens.aperture, when changes are requested,
          they may take several frames to reach the requested values. This state indicates
          the current status of the lens parameters.

          When the state is STATIONARY, the lens parameters are not changing. This could be
          either because the parameters are all fixed, or because the lens has had enough
          time to reach the most recently-requested values.
          If all these lens parameters are not changable for a camera device, as listed below:

          * Fixed focus (`android.lens.info.minimumFocusDistance == 0`), which means
          android.lens.focusDistance parameter will always be 0.
          * Fixed focal length (android.lens.info.availableFocalLengths contains single value),
          which means the optical zoom is not supported.
          * No ND filter (android.lens.info.availableFilterDensities contains only 0).
          * Fixed aperture (android.lens.info.availableApertures contains single value).

          Then this state will always be STATIONARY.

          When the state is MOVING, it indicates that at least one of the lens parameters
          is changing.
          </details>
          <tag id="V1" />
        </entry>
        <clone entry="android.lens.poseRotation" kind="static">
        </clone>
        <clone entry="android.lens.poseTranslation" kind="static">
        </clone>
      </dynamic>
      <static>
        <entry name="intrinsicCalibration" type="float" visibility="public"
               container="array">
          <array>
            <size>5</size>
          </array>
          <description>
            The parameters for this camera device's intrinsic
            calibration.
          </description>
          <units>
            Pixels in the
            android.sensor.info.preCorrectionActiveArraySize
            coordinate system.
          </units>
          <details>
            The five calibration parameters that describe the
            transform from camera-centric 3D coordinates to sensor
            pixel coordinates:

                [f_x, f_y, c_x, c_y, s]

            Where `f_x` and `f_y` are the horizontal and vertical
            focal lengths, `[c_x, c_y]` is the position of the optical
            axis, and `s` is a skew parameter for the sensor plane not
            being aligned with the lens plane.

            These are typically used within a transformation matrix K:

                K = [ f_x,   s, c_x,
                       0, f_y, c_y,
                       0    0,   1 ]

            which can then be combined with the camera pose rotation
            `R` and translation `t` (android.lens.poseRotation and
            android.lens.poseTranslation, respective) to calculate the
            complete transform from world coordinates to pixel
            coordinates:

                P = [ K 0   * [ R t
                     0 1 ]     0 1 ]

            and with `p_w` being a point in the world coordinate system
            and `p_s` being a point in the camera active pixel array
            coordinate system, and with the mapping including the
            homogeneous division by z:

                 p_h = (x_h, y_h, z_h) = P p_w
                p_s = p_h / z_h

            so `[x_s, y_s]` is the pixel coordinates of the world
            point, `z_s = 1`, and `w_s` is a measurement of disparity
            (depth) in pixel coordinates.

            Note that the coordinate system for this transform is the
            android.sensor.info.preCorrectionActiveArraySize system,
            where `(0,0)` is the top-left of the
            preCorrectionActiveArraySize rectangle. Once the pose and
            intrinsic calibration transforms have been applied to a
            world point, then the android.lens.distortion
            transform needs to be applied, and the result adjusted to
            be in the android.sensor.info.activeArraySize coordinate
            system (where `(0, 0)` is the top-left of the
            activeArraySize rectangle), to determine the final pixel
            coordinate of the world point for processed (non-RAW)
            output buffers.
          </details>
          <tag id="DEPTH" />
        </entry>
        <entry name="radialDistortion" type="float" visibility="public"
               deprecated="true" container="array">
          <array>
            <size>6</size>
          </array>
          <description>
            The correction coefficients to correct for this camera device's
            radial and tangential lens distortion.
          </description>
          <deprecation_description>
            This field was inconsistently defined in terms of its
            normalization. Use android.lens.distortion instead.
          </deprecation_description>
          <units>
            Unitless coefficients.
          </units>
          <details>
            Four radial distortion coefficients `[kappa_0, kappa_1, kappa_2,
            kappa_3]` and two tangential distortion coefficients
            `[kappa_4, kappa_5]` that can be used to correct the
            lens's geometric distortion with the mapping equations:

                 x_c = x_i * ( kappa_0 + kappa_1 * r^2 + kappa_2 * r^4 + kappa_3 * r^6 ) +
                       kappa_4 * (2 * x_i * y_i) + kappa_5 * ( r^2 + 2 * x_i^2 )
                 y_c = y_i * ( kappa_0 + kappa_1 * r^2 + kappa_2 * r^4 + kappa_3 * r^6 ) +
                       kappa_5 * (2 * x_i * y_i) + kappa_4 * ( r^2 + 2 * y_i^2 )

            Here, `[x_c, y_c]` are the coordinates to sample in the
            input image that correspond to the pixel values in the
            corrected image at the coordinate `[x_i, y_i]`:

                 correctedImage(x_i, y_i) = sample_at(x_c, y_c, inputImage)

            The pixel coordinates are defined in a normalized
            coordinate system related to the
            android.lens.intrinsicCalibration calibration fields.
            Both `[x_i, y_i]` and `[x_c, y_c]` have `(0,0)` at the
            lens optical center `[c_x, c_y]`. The maximum magnitudes
            of both x and y coordinates are normalized to be 1 at the
            edge further from the optical center, so the range
            for both dimensions is `-1 &lt;= x &lt;= 1`.

            Finally, `r` represents the radial distance from the
            optical center, `r^2 = x_i^2 + y_i^2`, and its magnitude
            is therefore no larger than `|r| &lt;= sqrt(2)`.

            The distortion model used is the Brown-Conrady model.
          </details>
          <tag id="DEPTH" />
        </entry>
      </static>
      <dynamic>
        <clone entry="android.lens.intrinsicCalibration" kind="static">
        </clone>
        <clone entry="android.lens.radialDistortion" kind="static">
        </clone>
      </dynamic>
      <static>
        <entry name="poseReference" type="byte" visibility="public" enum="true" hal_version="3.3">
          <enum>
            <value>PRIMARY_CAMERA
            <notes>The value of android.lens.poseTranslation is relative to the optical center of
            the largest camera device facing the same direction as this camera.

            This is the default value for API levels before Android P.
            </notes>
            </value>
            <value>GYROSCOPE
            <notes>The value of android.lens.poseTranslation is relative to the position of the
            primary gyroscope of this Android device.
            </notes>
            </value>
          </enum>
          <description>
            The origin for android.lens.poseTranslation.
          </description>
          <details>
            Different calibration methods and use cases can produce better or worse results
            depending on the selected coordinate origin.
          </details>
        </entry>
        <entry name="distortion" type="float" visibility="public" container="array"
               hal_version="3.3">
          <array>
            <size>5</size>
          </array>
          <description>
            The correction coefficients to correct for this camera device's
            radial and tangential lens distortion.

            Replaces the deprecated android.lens.radialDistortion field, which was
            inconsistently defined.
          </description>
          <units>
            Unitless coefficients.
          </units>
          <details>
            Three radial distortion coefficients `[kappa_1, kappa_2,
            kappa_3]` and two tangential distortion coefficients
            `[kappa_4, kappa_5]` that can be used to correct the
            lens's geometric distortion with the mapping equations:

                 x_c = x_i * ( 1 + kappa_1 * r^2 + kappa_2 * r^4 + kappa_3 * r^6 ) +
                       kappa_4 * (2 * x_i * y_i) + kappa_5 * ( r^2 + 2 * x_i^2 )
                 y_c = y_i * ( 1 + kappa_1 * r^2 + kappa_2 * r^4 + kappa_3 * r^6 ) +
                       kappa_5 * (2 * x_i * y_i) + kappa_4 * ( r^2 + 2 * y_i^2 )

            Here, `[x_c, y_c]` are the coordinates to sample in the
            input image that correspond to the pixel values in the
            corrected image at the coordinate `[x_i, y_i]`:

                 correctedImage(x_i, y_i) = sample_at(x_c, y_c, inputImage)

            The pixel coordinates are defined in a coordinate system
            related to the android.lens.intrinsicCalibration
            calibration fields; see that entry for details of the mapping stages.
            Both `[x_i, y_i]` and `[x_c, y_c]`
            have `(0,0)` at the lens optical center `[c_x, c_y]`, and
            the range of the coordinates depends on the focal length
            terms of the intrinsic calibration.

            Finally, `r` represents the radial distance from the
            optical center, `r^2 = x_i^2 + y_i^2`.

            The distortion model used is the Brown-Conrady model.
          </details>
          <tag id="DEPTH" />
        </entry>
      </static>
      <dynamic>
        <clone entry="android.lens.distortion" kind="static">
        </clone>
      </dynamic>
    </section>
    <section name="noiseReduction">
      <controls>
        <entry name="mode" type="byte" visibility="public" enum="true" hwlevel="full">
          <enum>
            <value>OFF
            <notes>No noise reduction is applied.</notes></value>
            <value>FAST
            <notes>Noise reduction is applied without reducing frame rate relative to sensor
            output. It may be the same as OFF if noise reduction will reduce frame rate
            relative to sensor.</notes></value>
            <value>HIGH_QUALITY
            <notes>High-quality noise reduction is applied, at the cost of possibly reduced frame
            rate relative to sensor output.</notes></value>
            <value optional="true">MINIMAL
            <notes>MINIMAL noise reduction is applied without reducing frame rate relative to
            sensor output. </notes></value>
            <value optional="true">ZERO_SHUTTER_LAG

            <notes>Noise reduction is applied at different levels for different output streams,
            based on resolution. Streams at maximum recording resolution (see {@link
            android.hardware.camera2.CameraDevice#createCaptureSession|ACameraDevice_createCaptureSession})
            or below have noise reduction applied, while higher-resolution streams have MINIMAL (if
            supported) or no noise reduction applied (if MINIMAL is not supported.) The degree of
            noise reduction for low-resolution streams is tuned so that frame rate is not impacted,
            and the quality is equal to or better than FAST (since it is only applied to
            lower-resolution outputs, quality may improve from FAST).

            This mode is intended to be used by applications operating in a zero-shutter-lag mode
            with YUV or PRIVATE reprocessing, where the application continuously captures
            high-resolution intermediate buffers into a circular buffer, from which a final image is
            produced via reprocessing when a user takes a picture.  For such a use case, the
            high-resolution buffers must not have noise reduction applied to maximize efficiency of
            preview and to avoid over-applying noise filtering when reprocessing, while
            low-resolution buffers (used for recording or preview, generally) need noise reduction
            applied for reasonable preview quality.

            This mode is guaranteed to be supported by devices that support either the
            YUV_REPROCESSING or PRIVATE_REPROCESSING capabilities
            (android.request.availableCapabilities lists either of those capabilities) and it will
            be the default mode for CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG template.
            </notes></value>
          </enum>
          <description>Mode of operation for the noise reduction algorithm.</description>
          <range>android.noiseReduction.availableNoiseReductionModes</range>
          <details>The noise reduction algorithm attempts to improve image quality by removing
          excessive noise added by the capture process, especially in dark conditions.

          OFF means no noise reduction will be applied by the camera device, for both raw and
          YUV domain.

          MINIMAL means that only sensor raw domain basic noise reduction is enabled ,to remove
          demosaicing or other processing artifacts. For YUV_REPROCESSING, MINIMAL is same as OFF.
          This mode is optional, may not be support by all devices. The application should check
          android.noiseReduction.availableNoiseReductionModes before using it.

          FAST/HIGH_QUALITY both mean camera device determined noise filtering
          will be applied. HIGH_QUALITY mode indicates that the camera device
          will use the highest-quality noise filtering algorithms,
          even if it slows down capture rate. FAST means the camera device will not
          slow down capture rate when applying noise filtering. FAST may be the same as MINIMAL if
          MINIMAL is listed, or the same as OFF if any noise filtering will slow down capture rate.
          Every output stream will have a similar amount of enhancement applied.

          ZERO_SHUTTER_LAG is meant to be used by applications that maintain a continuous circular
          buffer of high-resolution images during preview and reprocess image(s) from that buffer
          into a final capture when triggered by the user. In this mode, the camera device applies
          noise reduction to low-resolution streams (below maximum recording resolution) to maximize
          preview quality, but does not apply noise reduction to high-resolution streams, since
          those will be reprocessed later if necessary.

          For YUV_REPROCESSING, these FAST/HIGH_QUALITY modes both mean that the camera device
          will apply FAST/HIGH_QUALITY YUV domain noise reduction, respectively. The camera device
          may adjust the noise reduction parameters for best image quality based on the
          android.reprocess.effectiveExposureFactor if it is set.
          </details>
          <hal_details>
          For YUV_REPROCESSING The HAL can use android.reprocess.effectiveExposureFactor to
          adjust the internal noise reduction parameters appropriately to get the best quality
          images.
          </hal_details>
          <tag id="V1" />
          <tag id="REPROC" />
        </entry>
        <entry name="strength" type="byte">
          <description>Control the amount of noise reduction
          applied to the images</description>
          <units>1-10; 10 is max noise reduction</units>
          <range>1 - 10</range>
          <tag id="FUTURE" />
        </entry>
      </controls>
      <static>
        <entry name="availableNoiseReductionModes" type="byte" visibility="public"
        type_notes="list of enums" container="array" typedef="enumList" hwlevel="limited">
          <array>
            <size>n</size>
          </array>
          <description>
          List of noise reduction modes for android.noiseReduction.mode that are supported
          by this camera device.
          </description>
          <range>Any value listed in android.noiseReduction.mode</range>
          <details>
          Full-capability camera devices will always support OFF and FAST.

          Camera devices that support YUV_REPROCESSING or PRIVATE_REPROCESSING will support
          ZERO_SHUTTER_LAG.

          Legacy-capability camera devices will only support FAST mode.
          </details>
          <hal_details>
          HAL must support both FAST and HIGH_QUALITY if noise reduction control is available
          on the camera device, but the underlying implementation can be the same for both modes.
          That is, if the highest quality implementation on the camera device does not slow down
          capture rate, then FAST and HIGH_QUALITY will generate the same output.
          </hal_details>
          <tag id="V1" />
          <tag id="REPROC" />
        </entry>
      </static>
      <dynamic>
        <clone entry="android.noiseReduction.mode" kind="controls">
          <tag id="V1" />
          <tag id="REPROC" />
        </clone>
      </dynamic>
    </section>
    <section name="quirks">
      <static>
        <entry name="meteringCropRegion" type="byte" visibility="system" deprecated="true" optional="true">
          <description>If set to 1, the camera service does not
          scale 'normalized' coordinates with respect to the crop
          region. This applies to metering input (a{e,f,wb}Region
          and output (face rectangles).</description>
          <deprecation_description>
          Not used in HALv3 or newer
          </deprecation_description>
          <details>Normalized coordinates refer to those in the
          (-1000,1000) range mentioned in the
          android.hardware.Camera API.

          HAL implementations should instead always use and emit
          sensor array-relative coordinates for all region data. Does
          not need to be listed in static metadata. Support will be
          removed in future versions of camera service.</details>
        </entry>
        <entry name="triggerAfWithAuto" type="byte" visibility="system" deprecated="true" optional="true">
          <description>If set to 1, then the camera service always
          switches to FOCUS_MODE_AUTO before issuing a AF
          trigger.</description>
          <deprecation_description>
          Not used in HALv3 or newer
          </deprecation_description>
          <details>HAL implementations should implement AF trigger
          modes for AUTO, MACRO, CONTINUOUS_FOCUS, and
          CONTINUOUS_PICTURE modes instead of using this flag. Does
          not need to be listed in static metadata. Support will be
          removed in future versions of camera service</details>
        </entry>
        <entry name="useZslFormat" type="byte" visibility="system" deprecated="true" optional="true">
          <description>If set to 1, the camera service uses
          CAMERA2_PIXEL_FORMAT_ZSL instead of
          HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED for the zero
          shutter lag stream</description>
          <deprecation_description>
          Not used in HALv3 or newer
          </deprecation_description>
          <details>HAL implementations should use gralloc usage flags
          to determine that a stream will be used for
          zero-shutter-lag, instead of relying on an explicit
          format setting. Does not need to be listed in static
          metadata. Support will be removed in future versions of
          camera service.</details>
        </entry>
        <entry name="usePartialResult" type="byte" visibility="hidden" deprecated="true" optional="true">
          <description>
          If set to 1, the HAL will always split result
          metadata for a single capture into multiple buffers,
          returned using multiple process_capture_result calls.
          </description>
          <deprecation_description>
          Not used in HALv3 or newer; replaced by better partials mechanism
          </deprecation_description>
          <details>
          Does not need to be listed in static
          metadata. Support for partial results will be reworked in
          future versions of camera service. This quirk will stop
          working at that point; DO NOT USE without careful
          consideration of future support.
          </details>
          <hal_details>
          Refer to `camera3_capture_result::partial_result`
          for information on how to implement partial results.
          </hal_details>
        </entry>
      </static>
      <dynamic>
        <entry name="partialResult" type="byte" visibility="hidden" deprecated="true" optional="true" enum="true" typedef="boolean">
          <enum>
            <value>FINAL
            <notes>The last or only metadata result buffer
            for this capture.</notes>
            </value>
            <value>PARTIAL
            <notes>A partial buffer of result metadata for this
            capture. More result buffers for this capture will be sent
            by the camera device, the last of which will be marked
            FINAL.</notes>
            </value>
          </enum>
          <description>
          Whether a result given to the framework is the
          final one for the capture, or only a partial that contains a
          subset of the full set of dynamic metadata
          values.</description>
          <deprecation_description>
          Not used in HALv3 or newer
          </deprecation_description>
          <range>Optional. Default value is FINAL.</range>
          <details>
          The entries in the result metadata buffers for a
          single capture may not overlap, except for this entry. The
          FINAL buffers must retain FIFO ordering relative to the
          requests that generate them, so the FINAL buffer for frame 3 must
          always be sent to the framework after the FINAL buffer for frame 2, and
          before the FINAL buffer for frame 4. PARTIAL buffers may be returned
          in any order relative to other frames, but all PARTIAL buffers for a given
          capture must arrive before the FINAL buffer for that capture. This entry may
          only be used by the camera device if quirks.usePartialResult is set to 1.
          </details>
          <hal_details>
          Refer to `camera3_capture_result::partial_result`
          for information on how to implement partial results.
          </hal_details>
        </entry>
      </dynamic>
    </section>
    <section name="request">
      <controls>
        <entry name="frameCount" type="int32" visibility="system" deprecated="true">
          <description>A frame counter set by the framework. Must
          be maintained unchanged in output frame. This value monotonically
          increases with every new result (that is, each new result has a unique
          frameCount value).
          </description>
          <deprecation_description>
          Not used in HALv3 or newer
          </deprecation_description>
          <units>incrementing integer</units>
          <range>Any int.</range>
        </entry>
        <entry name="id" type="int32" visibility="hidden">
          <description>An application-specified ID for the current
          request. Must be maintained unchanged in output
          frame</description>
          <units>arbitrary integer assigned by application</units>
          <range>Any int</range>
          <tag id="V1" />
        </entry>
        <entry name="inputStreams" type="int32" visibility="system" deprecated="true"
               container="array">
          <array>
            <size>n</size>
          </array>
          <description>List which camera reprocess stream is used
          for the source of reprocessing data.</description>
          <deprecation_description>
          Not used in HALv3 or newer
          </deprecation_description>
          <units>List of camera reprocess stream IDs</units>
          <range>
          Typically, only one entry allowed, must be a valid reprocess stream ID.
          </range>
          <details>Only meaningful when android.request.type ==
          REPROCESS. Ignored otherwise</details>
          <tag id="HAL2" />
        </entry>
        <entry name="metadataMode" type="byte" visibility="system"
               enum="true">
          <enum>
            <value>NONE
            <notes>No metadata should be produced on output, except
            for application-bound buffer data. If no
            application-bound streams exist, no frame should be
            placed in the output frame queue. If such streams
            exist, a frame should be placed on the output queue
            with null metadata but with the necessary output buffer
            information. Timestamp information should still be
            included with any output stream buffers</notes></value>
            <value>FULL
            <notes>All metadata should be produced. Statistics will
            only be produced if they are separately
            enabled</notes></value>
          </enum>
          <description>How much metadata to produce on
          output</description>
          <tag id="FUTURE" />
        </entry>
        <entry name="outputStreams" type="int32" visibility="system" deprecated="true"
               container="array">
          <array>
            <size>n</size>
          </array>
          <description>Lists which camera output streams image data
          from this capture must be sent to</description>
          <deprecation_description>
          Not used in HALv3 or newer
          </deprecation_description>
          <units>List of camera stream IDs</units>
          <range>List must only include streams that have been
          created</range>
          <details>If no output streams are listed, then the image
          data should simply be discarded. The image data must
          still be captured for metadata and statistics production,
          and the lens and flash must operate as requested.</details>
          <tag id="HAL2" />
        </entry>
        <entry name="type" type="byte" visibility="system" deprecated="true" enum="true">
          <enum>
            <value>CAPTURE
            <notes>Capture a new image from the imaging hardware,
            and process it according to the
            settings</notes></value>
            <value>REPROCESS
            <notes>Process previously captured data; the
            android.request.inputStreams parameter determines the
            source reprocessing stream. TODO: Mark dynamic metadata
            needed for reprocessing with [RP]</notes></value>
          </enum>
          <description>The type of the request; either CAPTURE or
          REPROCESS. For legacy HAL3, this tag is redundant.
          </description>
          <deprecation_description>
          Not used in HALv3 or newer
          </deprecation_description>
          <tag id="HAL2" />
        </entry>
      </controls>
      <static>
        <entry name="maxNumOutputStreams" type="int32" visibility="ndk_public"
               container="array" hwlevel="legacy">
          <array>
            <size>3</size>
          </array>
          <description>The maximum numbers of different types of output streams
          that can be configured and used simultaneously by a camera device.
          </description>
          <range>
          For processed (and stalling) format streams, &amp;gt;= 1.

          For Raw format (either stalling or non-stalling) streams, &amp;gt;= 0.

          For processed (but not stalling) format streams, &amp;gt;= 3
          for FULL mode devices (`android.info.supportedHardwareLevel == FULL`);
          &amp;gt;= 2 for LIMITED mode devices (`android.info.supportedHardwareLevel == LIMITED`).
          </range>
          <details>
          This is a 3 element tuple that contains the max number of output simultaneous
          streams for raw sensor, processed (but not stalling), and processed (and stalling)
          formats respectively. For example, assuming that JPEG is typically a processed and
          stalling stream, if max raw sensor format output stream number is 1, max YUV streams
          number is 3, and max JPEG stream number is 2, then this tuple should be `(1, 3, 2)`.

          This lists the upper bound of the number of output streams supported by
          the camera device. Using more streams simultaneously may require more hardware and
          CPU resources that will consume more power. The image format for an output stream can
          be any supported format provided by android.scaler.availableStreamConfigurations.
          The formats defined in android.scaler.availableStreamConfigurations can be catergorized
          into the 3 stream types as below:

          * Processed (but stalling): any non-RAW format with a stallDurations &amp;gt; 0.
            Typically {@link android.graphics.ImageFormat#JPEG|AIMAGE_FORMAT_JPEG JPEG format}.
          * Raw formats: {@link android.graphics.ImageFormat#RAW_SENSOR|AIMAGE_FORMAT_RAW16
            RAW_SENSOR}, {@link android.graphics.ImageFormat#RAW10|AIMAGE_FORMAT_RAW10 RAW10}, or
            {@link android.graphics.ImageFormat#RAW12|AIMAGE_FORMAT_RAW12 RAW12}.
          * Processed (but not-stalling): any non-RAW format without a stall duration.  Typically
            {@link android.graphics.ImageFormat#YUV_420_888|AIMAGE_FORMAT_YUV_420_888 YUV_420_888},
            {@link android.graphics.ImageFormat#NV21 NV21}, or {@link
            android.graphics.ImageFormat#YV12 YV12}.
          </details>
          <tag id="BC" />
        </entry>
        <entry name="maxNumOutputRaw" type="int32" visibility="java_public" synthetic="true"
               hwlevel="legacy">
          <description>The maximum numbers of different types of output streams
          that can be configured and used simultaneously by a camera device
          for any `RAW` formats.
          </description>
          <range>
          &amp;gt;= 0
          </range>
          <details>
          This value contains the max number of output simultaneous
          streams from the raw sensor.

          This lists the upper bound of the number of output streams supported by
          the camera device. Using more streams simultaneously may require more hardware and
          CPU resources that will consume more power. The image format for this kind of an output stream can
          be any `RAW` and supported format provided by android.scaler.streamConfigurationMap.

          In particular, a `RAW` format is typically one of:

          * {@link android.graphics.ImageFormat#RAW_SENSOR|AIMAGE_FORMAT_RAW16 RAW_SENSOR}
          * {@link android.graphics.ImageFormat#RAW10|AIMAGE_FORMAT_RAW10 RAW10}
          * {@link android.graphics.ImageFormat#RAW12|AIMAGE_FORMAT_RAW12 RAW12}

          LEGACY mode devices (android.info.supportedHardwareLevel `==` LEGACY)
          never support raw streams.
          </details>
        </entry>
        <entry name="maxNumOutputProc" type="int32" visibility="java_public" synthetic="true"
               hwlevel="legacy">
          <description>The maximum numbers of different types of output streams
          that can be configured and used simultaneously by a camera device
          for any processed (but not-stalling) formats.
          </description>
          <range>
          &amp;gt;= 3
          for FULL mode devices (`android.info.supportedHardwareLevel == FULL`);
          &amp;gt;= 2 for LIMITED mode devices (`android.info.supportedHardwareLevel == LIMITED`).
          </range>
          <details>
          This value contains the max number of output simultaneous
          streams for any processed (but not-stalling) formats.

          This lists the upper bound of the number of output streams supported by
          the camera device. Using more streams simultaneously may require more hardware and
          CPU resources that will consume more power. The image format for this kind of an output stream can
          be any non-`RAW` and supported format provided by android.scaler.streamConfigurationMap.

          Processed (but not-stalling) is defined as any non-RAW format without a stall duration.
          Typically:

          * {@link android.graphics.ImageFormat#YUV_420_888|AIMAGE_FORMAT_YUV_420_888 YUV_420_888}
          * {@link android.graphics.ImageFormat#NV21 NV21}
          * {@link android.graphics.ImageFormat#YV12 YV12}
          * Implementation-defined formats, i.e. {@link
            android.hardware.camera2.params.StreamConfigurationMap#isOutputSupportedFor(Class)}

          For full guarantees, query {@link
          android.hardware.camera2.params.StreamConfigurationMap#getOutputStallDuration} with a
          processed format -- it will return 0 for a non-stalling stream.

          LEGACY devices will support at least 2 processing/non-stalling streams.
          </details>
        </entry>
        <entry name="maxNumOutputProcStalling" type="int32" visibility="java_public" synthetic="true"
               hwlevel="legacy">
          <description>The maximum numbers of different types of output streams
          that can be configured and used simultaneously by a camera device
          for any processed (and stalling) formats.
          </description>
          <range>
          &amp;gt;= 1
          </range>
          <details>
          This value contains the max number of output simultaneous
          streams for any processed (but not-stalling) formats.

          This lists the upper bound of the number of output streams supported by
          the camera device. Using more streams simultaneously may require more hardware and
          CPU resources that will consume more power. The image format for this kind of an output stream can
          be any non-`RAW` and supported format provided by android.scaler.streamConfigurationMap.

          A processed and stalling format is defined as any non-RAW format with a stallDurations
          &amp;gt; 0.  Typically only the {@link
          android.graphics.ImageFormat#JPEG|AIMAGE_FORMAT_JPEG JPEG format} is a stalling format.

          For full guarantees, query {@link
          android.hardware.camera2.params.StreamConfigurationMap#getOutputStallDuration} with a
          processed format -- it will return a non-0 value for a stalling stream.

          LEGACY devices will support up to 1 processing/stalling stream.
          </details>
        </entry>
        <entry name="maxNumReprocessStreams" type="int32" visibility="system"
        deprecated="true" container="array">
          <array>
            <size>1</size>
          </array>
          <description>How many reprocessing streams of any type
          can be allocated at the same time.</description>
          <deprecation_description>
          Not used in HALv3 or newer
          </deprecation_description>
          <range>&amp;gt;= 0</range>
          <details>
          Only used by HAL2.x.

          When set to 0, it means no reprocess stream is supported.
          </details>
          <tag id="HAL2" />
        </entry>
        <entry name="maxNumInputStreams" type="int32" visibility="java_public" hwlevel="full">
          <description>
          The maximum numbers of any type of input streams
          that can be configured and used simultaneously by a camera device.
          </description>
          <range>
          0 or 1.
          </range>
          <details>When set to 0, it means no input stream is supported.

          The image format for a input stream can be any supported format returned by {@link
          android.hardware.camera2.params.StreamConfigurationMap#getInputFormats}. When using an
          input stream, there must be at least one output stream configured to to receive the
          reprocessed images.

          When an input stream and some output streams are used in a reprocessing request,
          only the input buffer will be used to produce these output stream buffers, and a
          new sensor image will not be captured.

          For example, for Zero Shutter Lag (ZSL) still capture use case, the input
          stream image format will be PRIVATE, the associated output stream image format
          should be JPEG.
          </details>
          <hal_details>
          For the reprocessing flow and controls, see
          hardware/libhardware/include/hardware/camera3.h Section 10 for more details.
          </hal_details>
          <tag id="REPROC" />
        </entry>
      </static>
      <dynamic>
        <entry name="frameCount" type="int32" visibility="hidden" deprecated="true">
          <description>A frame counter set by the framework. This value monotonically
          increases with every new result (that is, each new result has a unique
          frameCount value).</description>
          <deprecation_description>
          Not used in HALv3 or newer
          </deprecation_description>
          <units>count of frames</units>
          <range>&amp;gt; 0</range>
          <details>Reset on release()</details>
        </entry>
        <clone entry="android.request.id" kind="controls"></clone>
        <clone entry="android.request.metadataMode"
        kind="controls"></clone>
        <clone entry="android.request.outputStreams"
        kind="controls"></clone>
        <entry name="pipelineDepth" type="byte" visibility="public" hwlevel="legacy">
          <description>Specifies the number of pipeline stages the frame went
          through from when it was exposed to when the final completed result
          was available to the framework.</description>
          <range>&amp;lt;= android.request.pipelineMaxDepth</range>
          <details>Depending on what settings are used in the request, and
          what streams are configured, the data may undergo less processing,
          and some pipeline stages skipped.

          See android.request.pipelineMaxDepth for more details.
          </details>
          <hal_details>
          This value must always represent the accurate count of how many
          pipeline stages were actually used.
          </hal_details>
        </entry>
      </dynamic>
      <static>
        <entry name="pipelineMaxDepth" type="byte" visibility="public" hwlevel="legacy">
          <description>Specifies the number of maximum pipeline stages a frame
          has to go through from when it's exposed to when it's available
          to the framework.</description>
          <details>A typical minimum value for this is 2 (one stage to expose,
          one stage to readout) from the sensor. The ISP then usually adds
          its own stages to do custom HW processing. Further stages may be
          added by SW processing.

          Depending on what settings are used (e.g. YUV, JPEG) and what
          processing is enabled (e.g. face detection), the actual pipeline
          depth (specified by android.request.pipelineDepth) may be less than
          the max pipeline depth.

          A pipeline depth of X stages is equivalent to a pipeline latency of
          X frame intervals.

          This value will normally be 8 or less, however, for high speed capture session,
          the max pipeline depth will be up to 8 x size of high speed capture request list.
          </details>
          <hal_details>
          This value should be 4 or less, expect for the high speed recording session, where the
          max batch sizes may be larger than 1.
          </hal_details>
        </entry>
        <entry name="partialResultCount" type="int32" visibility="public" optional="true">
          <description>Defines how many sub-components
          a result will be composed of.
          </description>
          <range>&amp;gt;= 1</range>
          <details>In order to combat the pipeline latency, partial results
          may be delivered to the application layer from the camera device as
          soon as they are available.

          Optional; defaults to 1. A value of 1 means that partial
          results are not supported, and only the final TotalCaptureResult will
          be produced by the camera device.

          A typical use case for this might be: after requesting an
          auto-focus (AF) lock the new AF state might be available 50%
          of the way through the pipeline.  The camera device could
          then immediately dispatch this state via a partial result to
          the application, and the rest of the metadata via later
          partial results.
          </details>
        </entry>
        <entry name="availableCapabilities" type="byte" visibility="public"
          enum="true" container="array" hwlevel="legacy">
          <array>
            <size>n</size>
          </array>
          <enum>
            <value>BACKWARD_COMPATIBLE
              <notes>The minimal set of capabilities that every camera
                device (regardless of android.info.supportedHardwareLevel)
                supports.

                This capability is listed by all normal devices, and
                indicates that the camera device has a feature set
                that's comparable to the baseline requirements for the
                older android.hardware.Camera API.

                Devices with the DEPTH_OUTPUT capability might not list this
                capability, indicating that they support only depth measurement,
                not standard color output.
              </notes>
            </value>
            <value optional="true">MANUAL_SENSOR
              <notes>
              The camera device can be manually controlled (3A algorithms such
              as auto-exposure, and auto-focus can be bypassed).
              The camera device supports basic manual control of the sensor image
              acquisition related stages. This means the following controls are
              guaranteed to be supported:

              * Manual frame duration control
                  * android.sensor.frameDuration
                  * android.sensor.info.maxFrameDuration
              * Manual exposure control
                  * android.sensor.exposureTime
                  * android.sensor.info.exposureTimeRange
              * Manual sensitivity control
                  * android.sensor.sensitivity
                  * android.sensor.info.sensitivityRange
              * Manual lens control (if the lens is adjustable)
                  * android.lens.*
              * Manual flash control (if a flash unit is present)
                  * android.flash.*
              * Manual black level locking
                  * android.blackLevel.lock
              * Auto exposure lock
                  * android.control.aeLock

              If any of the above 3A algorithms are enabled, then the camera
              device will accurately report the values applied by 3A in the
              result.

              A given camera device may also support additional manual sensor controls,
              but this capability only covers the above list of controls.

              If this is supported, android.scaler.streamConfigurationMap will
              additionally return a min frame duration that is greater than
              zero for each supported size-format combination.
              </notes>
            </value>
            <value optional="true">MANUAL_POST_PROCESSING
              <notes>
              The camera device post-processing stages can be manually controlled.
              The camera device supports basic manual control of the image post-processing
              stages. This means the following controls are guaranteed to be supported:

              * Manual tonemap control
                  * android.tonemap.curve
                  * android.tonemap.mode
                  * android.tonemap.maxCurvePoints
                  * android.tonemap.gamma
                  * android.tonemap.presetCurve

              * Manual white balance control
                  * android.colorCorrection.transform
                  * android.colorCorrection.gains
              * Manual lens shading map control
                    * android.shading.mode
                    * android.statistics.lensShadingMapMode
                    * android.statistics.lensShadingMap
                    * android.lens.info.shadingMapSize
              * Manual aberration correction control (if aberration correction is supported)
                    * android.colorCorrection.aberrationMode
                    * android.colorCorrection.availableAberrationModes
              * Auto white balance lock
                    * android.control.awbLock

              If auto white balance is enabled, then the camera device
              will accurately report the values applied by AWB in the result.

              A given camera device may also support additional post-processing
              controls, but this capability only covers the above list of controls.
              </notes>
            </value>
            <value optional="true">RAW
              <notes>
              The camera device supports outputting RAW buffers and
              metadata for interpreting them.

              Devices supporting the RAW capability allow both for
              saving DNG files, and for direct application processing of
              raw sensor images.

              * RAW_SENSOR is supported as an output format.
              * The maximum available resolution for RAW_SENSOR streams
                will match either the value in
                android.sensor.info.pixelArraySize or
                android.sensor.info.preCorrectionActiveArraySize.
              * All DNG-related optional metadata entries are provided
                by the camera device.
              </notes>
            </value>
            <value optional="true" ndk_hidden="true">PRIVATE_REPROCESSING
              <notes>
              The camera device supports the Zero Shutter Lag reprocessing use case.

              * One input stream is supported, that is, `android.request.maxNumInputStreams == 1`.
              * {@link android.graphics.ImageFormat#PRIVATE} is supported as an output/input format,
                that is, {@link android.graphics.ImageFormat#PRIVATE} is included in the lists of
                formats returned by {@link
                android.hardware.camera2.params.StreamConfigurationMap#getInputFormats} and {@link
                android.hardware.camera2.params.StreamConfigurationMap#getOutputFormats}.
              * {@link android.hardware.camera2.params.StreamConfigurationMap#getValidOutputFormatsForInput}
                returns non empty int[] for each supported input format returned by {@link
                android.hardware.camera2.params.StreamConfigurationMap#getInputFormats}.
              * Each size returned by {@link
                android.hardware.camera2.params.StreamConfigurationMap#getInputSizes
                getInputSizes(ImageFormat.PRIVATE)} is also included in {@link
                android.hardware.camera2.params.StreamConfigurationMap#getOutputSizes
                getOutputSizes(ImageFormat.PRIVATE)}
              * Using {@link android.graphics.ImageFormat#PRIVATE} does not cause a frame rate drop
                relative to the sensor's maximum capture rate (at that resolution).
              * {@link android.graphics.ImageFormat#PRIVATE} will be reprocessable into both
                {@link android.graphics.ImageFormat#YUV_420_888} and
                {@link android.graphics.ImageFormat#JPEG} formats.
              * The maximum available resolution for PRIVATE streams
                (both input/output) will match the maximum available
                resolution of JPEG streams.
              * Static metadata android.reprocess.maxCaptureStall.
              * Only below controls are effective for reprocessing requests and
                will be present in capture results, other controls in reprocess
                requests will be ignored by the camera device.
                    * android.jpeg.*
                    * android.noiseReduction.mode
                    * android.edge.mode
              * android.noiseReduction.availableNoiseReductionModes and
                android.edge.availableEdgeModes will both list ZERO_SHUTTER_LAG as a supported mode.
              </notes>
            </value>
            <value optional="true">READ_SENSOR_SETTINGS
              <notes>
              The camera device supports accurately reporting the sensor settings for many of
              the sensor controls while the built-in 3A algorithm is running.  This allows
              reporting of sensor settings even when these settings cannot be manually changed.

              The values reported for the following controls are guaranteed to be available
              in the CaptureResult, including when 3A is enabled:

              * Exposure control
                  * android.sensor.exposureTime
              * Sensitivity control
                  * android.sensor.sensitivity
              * Lens controls (if the lens is adjustable)
                  * android.lens.focusDistance
                  * android.lens.aperture

              This capability is a subset of the MANUAL_SENSOR control capability, and will
              always be included if the MANUAL_SENSOR capability is available.
              </notes>
            </value>
            <value optional="true">BURST_CAPTURE
              <notes>
              The camera device supports capturing high-resolution images at &gt;= 20 frames per
              second, in at least the uncompressed YUV format, when post-processing settings are set
              to FAST. Additionally, maximum-resolution images can be captured at &gt;= 10 frames
              per second.  Here, 'high resolution' means at least 8 megapixels, or the maximum
              resolution of the device, whichever is smaller.
              </notes>
              <sdk_notes>
              More specifically, this means that a size matching the camera device's active array
              size is listed as a supported size for the {@link
              android.graphics.ImageFormat#YUV_420_888} format in either {@link
              android.hardware.camera2.params.StreamConfigurationMap#getOutputSizes} or {@link
              android.hardware.camera2.params.StreamConfigurationMap#getHighResolutionOutputSizes},
              with a minimum frame duration for that format and size of either &lt;= 1/20 s, or
              &lt;= 1/10 s, respectively; and the android.control.aeAvailableTargetFpsRanges entry
              lists at least one FPS range where the minimum FPS is &gt;= 1 / minimumFrameDuration
              for the maximum-size YUV_420_888 format.  If that maximum size is listed in {@link
              android.hardware.camera2.params.StreamConfigurationMap#getHighResolutionOutputSizes},
              then the list of resolutions for YUV_420_888 from {@link
              android.hardware.camera2.params.StreamConfigurationMap#getOutputSizes} contains at
              least one resolution &gt;= 8 megapixels, with a minimum frame duration of &lt;= 1/20
              s.

              If the device supports the {@link
              android.graphics.ImageFormat#RAW10|AIMAGE_FORMAT_RAW10}, {@link
              android.graphics.ImageFormat#RAW12|AIMAGE_FORMAT_RAW12}, then those can also be
              captured at the same rate as the maximum-size YUV_420_888 resolution is.

              If the device supports the PRIVATE_REPROCESSING capability, then the same guarantees
              as for the YUV_420_888 format also apply to the {@link
              android.graphics.ImageFormat#PRIVATE} format.

              In addition, the android.sync.maxLatency field is guaranted to have a value between 0
              and 4, inclusive. android.control.aeLockAvailable and android.control.awbLockAvailable
              are also guaranteed to be `true` so burst capture with these two locks ON yields
              consistent image output.
              </sdk_notes>
              <ndk_notes>
              More specifically, this means that at least one output {@link
              android.graphics.ImageFormat#YUV_420_888|AIMAGE_FORMAT_YUV_420_888} size listed in
              {@link
              android.hardware.camera2.params.StreamConfigurationMap|ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS}
              is larger or equal to the 'high resolution' defined above, and can be captured at at
              least 20 fps.  For the largest {@link
              android.graphics.ImageFormat#YUV_420_888|AIMAGE_FORMAT_YUV_420_888} size listed in
              {@link
              android.hardware.camera2.params.StreamConfigurationMap|ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS},
              camera device can capture this size for at least 10 frames per second.  Also the
              android.control.aeAvailableTargetFpsRanges entry lists at least one FPS range where
              the minimum FPS is &gt;= 1 / minimumFrameDuration for the largest YUV_420_888 size.

              If the device supports the {@link
              android.graphics.ImageFormat#RAW10|AIMAGE_FORMAT_RAW10}, {@link
              android.graphics.ImageFormat#RAW12|AIMAGE_FORMAT_RAW12}, then those can also be
              captured at the same rate as the maximum-size YUV_420_888 resolution is.

              In addition, the android.sync.maxLatency field is guaranted to have a value between 0
              and 4, inclusive. android.control.aeLockAvailable and android.control.awbLockAvailable
              are also guaranteed to be `true` so burst capture with these two locks ON yields
              consistent image output.
              </ndk_notes>
            </value>
            <value optional="true" ndk_hidden="true">YUV_REPROCESSING
              <notes>
              The camera device supports the YUV_420_888 reprocessing use case, similar as
              PRIVATE_REPROCESSING, This capability requires the camera device to support the
              following:

              * One input stream is supported, that is, `android.request.maxNumInputStreams == 1`.
              * {@link android.graphics.ImageFormat#YUV_420_888} is supported as an output/input
                format, that is, YUV_420_888 is included in the lists of formats returned by {@link
                android.hardware.camera2.params.StreamConfigurationMap#getInputFormats} and {@link
                android.hardware.camera2.params.StreamConfigurationMap#getOutputFormats}.
              * {@link
                android.hardware.camera2.params.StreamConfigurationMap#getValidOutputFormatsForInput}
                returns non-empty int[] for each supported input format returned by {@link
                android.hardware.camera2.params.StreamConfigurationMap#getInputFormats}.
              * Each size returned by {@link
                android.hardware.camera2.params.StreamConfigurationMap#getInputSizes
                getInputSizes(YUV_420_888)} is also included in {@link
                android.hardware.camera2.params.StreamConfigurationMap#getOutputSizes
                getOutputSizes(YUV_420_888)}
              * Using {@link android.graphics.ImageFormat#YUV_420_888} does not cause a frame rate
                drop relative to the sensor's maximum capture rate (at that resolution).
              * {@link android.graphics.ImageFormat#YUV_420_888} will be reprocessable into both
                {@link android.graphics.ImageFormat#YUV_420_888} and {@link
                android.graphics.ImageFormat#JPEG} formats.
              * The maximum available resolution for {@link
                android.graphics.ImageFormat#YUV_420_888} streams (both input/output) will match the
                maximum available resolution of {@link android.graphics.ImageFormat#JPEG} streams.
              * Static metadata android.reprocess.maxCaptureStall.
              * Only the below controls are effective for reprocessing requests and will be present
                in capture results. The reprocess requests are from the original capture results
                that are associated with the intermediate {@link
                android.graphics.ImageFormat#YUV_420_888} output buffers.  All other controls in the
                reprocess requests will be ignored by the camera device.
                    * android.jpeg.*
                    * android.noiseReduction.mode
                    * android.edge.mode
                    * android.reprocess.effectiveExposureFactor
              * android.noiseReduction.availableNoiseReductionModes and
                android.edge.availableEdgeModes will both list ZERO_SHUTTER_LAG as a supported mode.
              </notes>
            </value>
            <value optional="true">DEPTH_OUTPUT
              <notes>
              The camera device can produce depth measurements from its field of view.

              This capability requires the camera device to support the following:

              * {@link android.graphics.ImageFormat#DEPTH16|AIMAGE_FORMAT_DEPTH16} is supported as
                an output format.
              * {@link
                android.graphics.ImageFormat#DEPTH_POINT_CLOUD|AIMAGE_FORMAT_DEPTH_POINT_CLOUD} is
                optionally supported as an output format.
              * This camera device, and all camera devices with the same android.lens.facing, will
                list the following calibration metadata entries in both {@link
                android.hardware.camera2.CameraCharacteristics|ACameraManager_getCameraCharacteristics}
                and {@link
                android.hardware.camera2.CaptureResult|ACameraCaptureSession_captureCallback_result}:
                  - android.lens.poseTranslation
                  - android.lens.poseRotation
                  - android.lens.intrinsicCalibration
                  - android.lens.distortion
              * The android.depth.depthIsExclusive entry is listed by this device.
              * As of Android P, the android.lens.poseReference entry is listed by this device.
              * A LIMITED camera with only the DEPTH_OUTPUT capability does not have to support
                normal YUV_420_888, JPEG, and PRIV-format outputs. It only has to support the DEPTH16
                format.

              Generally, depth output operates at a slower frame rate than standard color capture,
              so the DEPTH16 and DEPTH_POINT_CLOUD formats will commonly have a stall duration that
              should be accounted for (see {@link
              android.hardware.camera2.params.StreamConfigurationMap#getOutputStallDuration|ACAMERA_DEPTH_AVAILABLE_DEPTH_STALL_DURATIONS}).
              On a device that supports both depth and color-based output, to enable smooth preview,
              using a repeating burst is recommended, where a depth-output target is only included
              once every N frames, where N is the ratio between preview output rate and depth output
              rate, including depth stall time.
              </notes>
            </value>
            <value optional="true" ndk_hidden="true">CONSTRAINED_HIGH_SPEED_VIDEO
              <notes>
              The device supports constrained high speed video recording (frame rate >=120fps) use
              case. The camera device will support high speed capture session created by {@link
              android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession}, which
              only accepts high speed request lists created by {@link
              android.hardware.camera2.CameraConstrainedHighSpeedCaptureSession#createHighSpeedRequestList}.

              A camera device can still support high speed video streaming by advertising the high
              speed FPS ranges in android.control.aeAvailableTargetFpsRanges. For this case, all
              normal capture request per frame control and synchronization requirements will apply
              to the high speed fps ranges, the same as all other fps ranges. This capability
              describes the capability of a specialized operating mode with many limitations (see
              below), which is only targeted at high speed video recording.

              The supported high speed video sizes and fps ranges are specified in {@link
              android.hardware.camera2.params.StreamConfigurationMap#getHighSpeedVideoFpsRanges}.
              To get desired output frame rates, the application is only allowed to select video
              size and FPS range combinations provided by {@link
              android.hardware.camera2.params.StreamConfigurationMap#getHighSpeedVideoSizes}.  The
              fps range can be controlled via android.control.aeTargetFpsRange.

              In this capability, the camera device will override aeMode, awbMode, and afMode to
              ON, AUTO, and CONTINUOUS_VIDEO, respectively. All post-processing block mode
              controls will be overridden to be FAST. Therefore, no manual control of capture
              and post-processing parameters is possible. All other controls operate the
              same as when android.control.mode == AUTO. This means that all other
              android.control.* fields continue to work, such as

              * android.control.aeTargetFpsRange
              * android.control.aeExposureCompensation
              * android.control.aeLock
              * android.control.awbLock
              * android.control.effectMode
              * android.control.aeRegions
              * android.control.afRegions
              * android.control.awbRegions
              * android.control.afTrigger
              * android.control.aePrecaptureTrigger

              Outside of android.control.*, the following controls will work:

              * android.flash.mode (TORCH mode only, automatic flash for still capture will not
              work since aeMode is ON)
              * android.lens.opticalStabilizationMode (if it is supported)
              * android.scaler.cropRegion
              * android.statistics.faceDetectMode (if it is supported)

              For high speed recording use case, the actual maximum supported frame rate may
              be lower than what camera can output, depending on the destination Surfaces for
              the image data. For example, if the destination surface is from video encoder,
              the application need check if the video encoder is capable of supporting the
              high frame rate for a given video size, or it will end up with lower recording
              frame rate. If the destination surface is from preview window, the actual preview frame
              rate will be bounded by the screen refresh rate.

              The camera device will only support up to 2 high speed simultaneous output surfaces
              (preview and recording surfaces) in this mode. Above controls will be effective only
              if all of below conditions are true:

              * The application creates a camera capture session with no more than 2 surfaces via
              {@link
              android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession}. The
              targeted surfaces must be preview surface (either from {@link
              android.view.SurfaceView} or {@link android.graphics.SurfaceTexture}) or recording
              surface(either from {@link android.media.MediaRecorder#getSurface} or {@link
              android.media.MediaCodec#createInputSurface}).
              * The stream sizes are selected from the sizes reported by
              {@link android.hardware.camera2.params.StreamConfigurationMap#getHighSpeedVideoSizes}.
              * The FPS ranges are selected from {@link
              android.hardware.camera2.params.StreamConfigurationMap#getHighSpeedVideoFpsRanges}.

              When above conditions are NOT satistied,
              {@link android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession}
              will fail.

              Switching to a FPS range that has different maximum FPS may trigger some camera device
              reconfigurations, which may introduce extra latency. It is recommended that
              the application avoids unnecessary maximum target FPS changes as much as possible
              during high speed streaming.
              </notes>
            </value>
            <value optional="true" hal_version="3.3" >MOTION_TRACKING
              <notes>
              The camera device supports the MOTION_TRACKING value for
              android.control.captureIntent, which limits maximum exposure time to 20 ms.

              This limits the motion blur of capture images, resulting in better image tracking
              results for use cases such as image stabilization or augmented reality.
              </notes>
            </value>
            <value optional="true" hal_version="3.3">LOGICAL_MULTI_CAMERA
              <notes>
              The camera device is a logical camera backed by two or more physical cameras that are
              also exposed to the application.

              Camera application shouldn't assume that there are at most 1 rear camera and 1 front
              camera in the system. For an application that switches between front and back cameras,
              the recommendation is to switch between the first rear camera and the first front
              camera in the list of supported camera devices.

              This capability requires the camera device to support the following:

              * This camera device must list the following static metadata entries in {@link
                android.hardware.camera2.CameraCharacteristics}:
                  - android.logicalMultiCamera.physicalIds
                  - android.logicalMultiCamera.sensorSyncType
              * The underlying physical cameras' static metadata must list the following entries,
                so that the application can correlate pixels from the physical streams:
                  - android.lens.poseReference
                  - android.lens.poseRotation
                  - android.lens.poseTranslation
                  - android.lens.intrinsicCalibration
                  - android.lens.distortion
              * The SENSOR_INFO_TIMESTAMP_SOURCE of the logical device and physical devices must be
                the same.
              * The logical camera device must be LIMITED or higher device.

              Both the logical camera device and its underlying physical devices support the
              mandatory stream combinations required for their device levels.

              Additionally, for each guaranteed stream combination, the logical camera supports:

              * For each guaranteed stream combination, the logical camera supports replacing one
                logical {@link android.graphics.ImageFormat#YUV_420_888|AIMAGE_FORMAT_YUV_420_888 YUV_420_888}
                or raw stream with two physical streams of the same size and format, each from a
                separate physical camera, given that the size and format are supported by both
                physical cameras.
              * If the logical camera doesn't advertise RAW capability, but the underlying physical
                cameras do, the logical camera will support guaranteed stream combinations for RAW
                capability, except that the RAW streams will be physical streams, each from a separate
                physical camera. This is usually the case when the physical cameras have different
                sensor sizes.

              Using physical streams in place of a logical stream of the same size and format will
              not slow down the frame rate of the capture, as long as the minimum frame duration
              of the physical and logical streams are the same.
              </notes>
            </value>
            <value optional="true" hal_version="3.3" >MONOCHROME
              <notes>
              The camera device is a monochrome camera that doesn't contain a color filter array,
              and the pixel values on U and V planes are all 128.
              </notes>
            </value>

          </enum>
          <description>List of capabilities that this camera device
          advertises as fully supporting.</description>
          <details>
          A capability is a contract that the camera device makes in order
          to be able to satisfy one or more use cases.

          Listing a capability guarantees that the whole set of features
          required to support a common use will all be available.

          Using a subset of the functionality provided by an unsupported
          capability may be possible on a specific camera device implementation;
          to do this query each of android.request.availableRequestKeys,
          android.request.availableResultKeys,
          android.request.availableCharacteristicsKeys.

          The following capabilities are guaranteed to be available on
          android.info.supportedHardwareLevel `==` FULL devices:

          * MANUAL_SENSOR
          * MANUAL_POST_PROCESSING

          Other capabilities may be available on either FULL or LIMITED
          devices, but the application should query this key to be sure.
          </details>
          <hal_details>
          Additional constraint details per-capability will be available
          in the Compatibility Test Suite.

          Minimum baseline requirements required for the
          BACKWARD_COMPATIBLE capability are not explicitly listed.
          Instead refer to "BC" tags and the camera CTS tests in the
          android.hardware.camera2.cts package.

          Listed controls that can be either request or result (e.g.
          android.sensor.exposureTime) must be available both in the
          request and the result in order to be considered to be
          capability-compliant.

          For example, if the HAL claims to support MANUAL control,
          then exposure time must be configurable via the request _and_
          the actual exposure applied must be available via
          the result.

          If MANUAL_SENSOR is omitted, the HAL may choose to omit the
          android.scaler.availableMinFrameDurations static property entirely.

          For PRIVATE_REPROCESSING and YUV_REPROCESSING capabilities, see
          hardware/libhardware/include/hardware/camera3.h Section 10 for more information.

          Devices that support the MANUAL_SENSOR capability must support the
          CAMERA3_TEMPLATE_MANUAL template defined in camera3.h.

          Devices that support the PRIVATE_REPROCESSING capability or the
          YUV_REPROCESSING capability must support the
          CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG template defined in camera3.h.

          For DEPTH_OUTPUT, the depth-format keys
          android.depth.availableDepthStreamConfigurations,
          android.depth.availableDepthMinFrameDurations,
          android.depth.availableDepthStallDurations must be available, in
          addition to the other keys explicitly mentioned in the DEPTH_OUTPUT
          enum notes. The entry android.depth.maxDepthSamples must be available
          if the DEPTH_POINT_CLOUD format is supported (HAL pixel format BLOB, dataspace
          DEPTH).

          For a camera device with LOGICAL_MULTI_CAMERA capability, it should operate in the
          same way as a physical camera device based on its hardware level and capabilities.
          It's recommended that its feature set is superset of that of individual physical cameras.

          * In camera1 API, to maintain application compatibility, for each {logical_camera_id,
          physical_camera_1_id, physical_camera_2_id, ...} combination, where logical_camera_id
          is composed of physical_camera_N_id, camera framework will only advertise one camera id
          (within the combination) that is frontmost in the HAL published camera id list.

          * Camera HAL is strongly recommended to advertise camera devices with best feature,
          power, performance, and latency tradeoffs at the front of the camera id list.

          For MONOCHROME, the camera device must also advertise BACKWARD_COMPATIBLE capability, and
          it is exclusive of both RAW and MANUAL_POST_PROCESSING capabilities:

          * To maintain backward compatibility, the camera device must support all
          BACKWARD_COMPATIBLE required keys. The android.control.awbAvailableModes key only contains
          AUTO, and android.control.awbState are either CONVERGED or LOCKED depending on
          android.control.awbLock.

          * A monochrome device doesn't need to advertise DNG related optional metadata tags.

          * android.colorCorrection.mode, android.colorCorrection.transform, and
          android.colorCorrection.gains are not applicable. So the camera device cannot
          be a FULL device. However, the HAL can still advertise other individual capabilites.

          * If the device supports tonemap control, only android.tonemap.curveRed is used.
          CurveGreen and curveBlue are no-ops.
          </hal_details>
        </entry>
        <entry name="availableRequestKeys" type="int32" visibility="ndk_public"
               container="array" hwlevel="legacy">
          <array>
            <size>n</size>
          </array>
          <description>A list of all keys that the camera device has available
          to use with {@link android.hardware.camera2.CaptureRequest|ACaptureRequest}.</description>

          <details>Attempting to set a key into a CaptureRequest that is not
          listed here will result in an invalid request and will be rejected
          by the camera device.

          This field can be used to query the feature set of a camera device
          at a more granular level than capabilities. This is especially
          important for optional keys that are not listed under any capability
          in android.request.availableCapabilities.
          </details>
          <hal_details>
          Vendor tags can be listed here. Vendor tag metadata should also
          use the extensions C api (refer to camera3.h for more details).

          Setting/getting vendor tags will be checked against the metadata
          vendor extensions API and not against this field.

          The HAL must not consume any request tags that are not listed either
          here or in the vendor tag list.

          The public camera2 API will always make the vendor tags visible
          via
          {@link android.hardware.camera2.CameraCharacteristics#getAvailableCaptureRequestKeys}.
          </hal_details>
        </entry>
        <entry name="availableResultKeys" type="int32" visibility="ndk_public"
               container="array" hwlevel="legacy">
          <array>
            <size>n</size>
          </array>
          <description>A list of all keys that the camera device has available to use with {@link
          android.hardware.camera2.CaptureResult|ACameraCaptureSession_captureCallback_result}.
          </description>

          <details>Attempting to get a key from a CaptureResult that is not
          listed here will always return a `null` value. Getting a key from
          a CaptureResult that is listed here will generally never return a `null`
          value.

          The following keys may return `null` unless they are enabled:

          * android.statistics.lensShadingMap (non-null iff android.statistics.lensShadingMapMode == ON)

          (Those sometimes-null keys will nevertheless be listed here
          if they are available.)

          This field can be used to query the feature set of a camera device
          at a more granular level than capabilities. This is especially
          important for optional keys that are not listed under any capability
          in android.request.availableCapabilities.
          </details>
          <hal_details>
          Tags listed here must always have an entry in the result metadata,
          even if that size is 0 elements. Only array-type tags (e.g. lists,
          matrices, strings) are allowed to have 0 elements.

          Vendor tags can be listed here. Vendor tag metadata should also
          use the extensions C api (refer to camera3.h for more details).

          Setting/getting vendor tags will be checked against the metadata
          vendor extensions API and not against this field.

          The HAL must not produce any result tags that are not listed either
          here or in the vendor tag list.

          The public camera2 API will always make the vendor tags visible via {@link
          android.hardware.camera2.CameraCharacteristics#getAvailableCaptureResultKeys}.
          </hal_details>
        </entry>
        <entry name="availableCharacteristicsKeys" type="int32" visibility="ndk_public"
               container="array" hwlevel="legacy">
          <array>
            <size>n</size>
          </array>
          <description>A list of all keys that the camera device has available to use with {@link
          android.hardware.camera2.CameraCharacteristics|ACameraManager_getCameraCharacteristics}.
          </description>
          <details>This entry follows the same rules as
          android.request.availableResultKeys (except that it applies for
          CameraCharacteristics instead of CaptureResult). See above for more
          details.
          </details>
          <hal_details>
          Keys listed here must always have an entry in the static info metadata,
          even if that size is 0 elements. Only array-type tags (e.g. lists,
          matrices, strings) are allowed to have 0 elements.

          Vendor tags can listed here. Vendor tag metadata should also use
          the extensions C api (refer to camera3.h for more details).

          Setting/getting vendor tags will be checked against the metadata
          vendor extensions API and not against this field.

          The HAL must not have any tags in its static info that are not listed
          either here or in the vendor tag list.

          The public camera2 API will always make the vendor tags visible
          via {@link android.hardware.camera2.CameraCharacteristics#getKeys}.
          </hal_details>
        </entry>
        <entry name="availableSessionKeys" type="int32" visibility="ndk_public"
               container="array" hwlevel="legacy" hal_version="3.3">
          <array>
            <size>n</size>
          </array>
          <description>A subset of the available request keys that the camera device
          can pass as part of the capture session initialization.</description>

          <details> This is a subset of android.request.availableRequestKeys which
          contains a list of keys that are difficult to apply per-frame and
          can result in unexpected delays when modified during the capture session
          lifetime. Typical examples include parameters that require a
          time-consuming hardware re-configuration or internal camera pipeline
          change. For performance reasons we advise clients to pass their initial
          values as part of
          {@link SessionConfiguration#setSessionParameters|ACameraDevice_createCaptureSessionWithSessionParameters}.
          Once the camera capture session is enabled it is also recommended to avoid
          changing them from their initial values set in
          {@link SessionConfiguration#setSessionParameters|ACameraDevice_createCaptureSessionWithSessionParameters}.
          Control over session parameters can still be exerted in capture requests
          but clients should be aware and expect delays during their application.
          An example usage scenario could look like this:

          * The camera client starts by quering the session parameter key list via
            {@link android.hardware.camera2.CameraCharacteristics#getAvailableSessionKeys|ACameraManager_getCameraCharacteristics}.
          * Before triggering the capture session create sequence, a capture request
            must be built via
            {@link CameraDevice#createCaptureRequest|ACameraDevice_createCaptureRequest}
            using an appropriate template matching the particular use case.
          * The client should go over the list of session parameters and check
            whether some of the keys listed matches with the parameters that
            they intend to modify as part of the first capture request.
          * If there is no such match, the capture request can be  passed
            unmodified to
            {@link SessionConfiguration#setSessionParameters|ACameraDevice_createCaptureSessionWithSessionParameters}.
          * If matches do exist, the client should update the respective values
            and pass the request to
            {@link SessionConfiguration#setSessionParameters|ACameraDevice_createCaptureSessionWithSessionParameters}.
          * After the capture session initialization completes the session parameter
            key list can continue to serve as reference when posting or updating
            further requests. As mentioned above further changes to session
            parameters should ideally be avoided, if updates are necessary
            however clients could expect a delay/glitch during the
            parameter switch.

          </details>
          <hal_details>
          If android.control.aeTargetFpsRange is part of the session parameters and constrained high
          speed mode is enabled, then only modifications of the maximum framerate value will be
          monitored by the framework and can trigger camera re-configuration. For more information
          about framerate ranges during constrained high speed sessions see
          {@link android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession}.
          Vendor tags can be listed here. Vendor tag metadata should also
          use the extensions C api (refer to
          android.hardware.camera.device.V3_4.StreamConfiguration.sessionParams for more details).

          Setting/getting vendor tags will be checked against the metadata
          vendor extensions API and not against this field.

          The HAL must not consume any request tags in the session parameters that
          are not listed either here or in the vendor tag list.

          The public camera2 API will always make the vendor tags visible
          via
          {@link android.hardware.camera2.CameraCharacteristics#getAvailableSessionKeys}.
          </hal_details>
        </entry>
        <entry name="availablePhysicalCameraRequestKeys" type="int32" visibility="hidden"
               container="array" hwlevel="limited" hal_version="3.3">
          <array>
            <size>n</size>
          </array>
          <description>A subset of the available request keys that can be overriden for
          physical devices backing a logical multi-camera.</description>
          <details>
          This is a subset of android.request.availableRequestKeys which contains a list
          of keys that can be overriden using {@link CaptureRequest.Builder#setPhysicalCameraKey}.
          The respective value of such request key can be obtained by calling
          {@link CaptureRequest.Builder#getPhysicalCameraKey}. Capture requests that contain
          individual physical device requests must be built via
          {@link android.hardware.camera2.CameraDevice#createCaptureRequest(int, Set)}.
          </details>
          <hal_details>
          Vendor tags can be listed here. Vendor tag metadata should also
          use the extensions C api (refer to
          android.hardware.camera.device.V3_4.CaptureRequest.physicalCameraSettings for more
          details).

          Setting/getting vendor tags will be checked against the metadata
          vendor extensions API and not against this field.

          The HAL must not consume any request tags in the session parameters that
          are not listed either here or in the vendor tag list.

          There should be no overlap between this set of keys and the available session keys
          {@link android.hardware.camera2.CameraCharacteristics#getAvailableSessionKeys} along
          with any other controls that can have impact on the dual-camera sync.

          The public camera2 API will always make the vendor tags visible
          via
          {@link android.hardware.camera2.CameraCharacteristics#getAvailablePhysicalCameraRequestKeys}.
          </hal_details>
        </entry>
      </static>
    </section>
    <section name="scaler">
      <controls>
        <entry name="cropRegion" type="int32" visibility="public"
               container="array" typedef="rectangle" hwlevel="legacy">
          <array>
            <size>4</size>
          </array>
          <description>The desired region of the sensor to read out for this capture.</description>
          <units>Pixel coordinates relative to
          android.sensor.info.activeArraySize</units>
          <details>
            This control can be used to implement digital zoom.

            The crop region coordinate system is based off
            android.sensor.info.activeArraySize, with `(0, 0)` being the
            top-left corner of the sensor active array.

            Output streams use this rectangle to produce their output,
            cropping to a smaller region if necessary to maintain the
            stream's aspect ratio, then scaling the sensor input to
            match the output's configured resolution.

            The crop region is applied after the RAW to other color
            space (e.g. YUV) conversion. Since raw streams
            (e.g. RAW16) don't have the conversion stage, they are not
            croppable. The crop region will be ignored by raw streams.

            For non-raw streams, any additional per-stream cropping will
            be done to maximize the final pixel area of the stream.

            For example, if the crop region is set to a 4:3 aspect
            ratio, then 4:3 streams will use the exact crop
            region. 16:9 streams will further crop vertically
            (letterbox).

            Conversely, if the crop region is set to a 16:9, then 4:3
            outputs will crop horizontally (pillarbox), and 16:9
            streams will match exactly. These additional crops will
            be centered within the crop region.

            The width and height of the crop region cannot
            be set to be smaller than
            `floor( activeArraySize.width / android.scaler.availableMaxDigitalZoom )` and
            `floor( activeArraySize.height / android.scaler.availableMaxDigitalZoom )`, respectively.

            The camera device may adjust the crop region to account
            for rounding and other hardware requirements; the final
            crop region used will be included in the output capture
            result.
          </details>
          <ndk_details>
            The data representation is int[4], which maps to (left, top, width, height).
          </ndk_details>
          <hal_details>
            The output streams must maintain square pixels at all
            times, no matter what the relative aspect ratios of the
            crop region and the stream are.  Negative values for
            corner are allowed for raw output if full pixel array is
            larger than active pixel array. Width and height may be
            rounded to nearest larger supportable width, especially
            for raw output, where only a few fixed scales may be
            possible.

            For a set of output streams configured, if the sensor output is cropped to a smaller
            size than active array size, the HAL need follow below cropping rules:

            * The HAL need handle the cropRegion as if the sensor crop size is the effective active
            array size.More specifically, the HAL must transform the request cropRegion from
            android.sensor.info.activeArraySize to the sensor cropped pixel area size in this way:
                1. Translate the requested cropRegion w.r.t., the left top corner of the sensor
                cropped pixel area by (tx, ty),
                where `tx = sensorCrop.top * (sensorCrop.height / activeArraySize.height)`
                and `tx = sensorCrop.left * (sensorCrop.width / activeArraySize.width)`. The
                (sensorCrop.top, sensorCrop.left) is the coordinate based off the
                android.sensor.info.activeArraySize.
                2. Scale the width and height of requested cropRegion with scaling factor of
                sensorCrop.width/activeArraySize.width and sensorCrop.height/activeArraySize.height
                respectively.
            Once this new cropRegion is calculated, the HAL must use this region to crop the image
            with regard to the sensor crop size (effective active array size). The HAL still need
            follow the general cropping rule for this new cropRegion and effective active
            array size.

            * The HAL must report the cropRegion with regard to android.sensor.info.activeArraySize.
            The HAL need convert the new cropRegion generated above w.r.t., full active array size.
            The reported cropRegion may be slightly different with the requested cropRegion since
            the HAL may adjust the crop region to account for rounding, conversion error, or other
            hardware limitations.

            HAL2.x uses only (x, y, width)
          </hal_details>
          <tag id="BC" />
        </entry>
      </controls>
      <static>
        <entry name="availableFormats" type="int32"
        visibility="hidden" deprecated="true" enum="true"
        container="array" typedef="imageFormat">
          <array>
            <size>n</size>
          </array>
          <enum>
            <value optional="true" id="0x20">RAW16
              <notes>
              RAW16 is a standard, cross-platform format for raw image
              buffers with 16-bit pixels.

              Buffers of this format are typically expected to have a
              Bayer Color Filter Array (CFA) layout, which is given in
              android.sensor.info.colorFilterArrangement. Sensors with
              CFAs that are not representable by a format in
              android.sensor.info.colorFilterArrangement should not
              use this format.

              Buffers of this format will also follow the constraints given for
              RAW_OPAQUE buffers, but with relaxed performance constraints.

              This format is intended to give users access to the full contents
              of the buffers coming directly from the image sensor prior to any
              cropping or scaling operations, and all coordinate systems for
              metadata used for this format are relative to the size of the
              active region of the image sensor before any geometric distortion
              correction has been applied (i.e.
              android.sensor.info.preCorrectionActiveArraySize). Supported
              dimensions for this format are limited to the full dimensions of
              the sensor (e.g. either android.sensor.info.pixelArraySize or
              android.sensor.info.preCorrectionActiveArraySize will be the
              only supported output size).

              See android.scaler.availableInputOutputFormatsMap for
              the full set of performance guarantees.
              </notes>
            </value>
            <value optional="true" id="0x24">RAW_OPAQUE
              <notes>
              RAW_OPAQUE (or
              {@link android.graphics.ImageFormat#RAW_PRIVATE RAW_PRIVATE}
              as referred in public API) is a format for raw image buffers
              coming from an image sensor.

              The actual structure of buffers of this format is
              platform-specific, but must follow several constraints:

              1. No image post-processing operations may have been applied to
              buffers of this type. These buffers contain raw image data coming
              directly from the image sensor.
              1. If a buffer of this format is passed to the camera device for
              reprocessing, the resulting images will be identical to the images
              produced if the buffer had come directly from the sensor and was
              processed with the same settings.

              The intended use for this format is to allow access to the native
              raw format buffers coming directly from the camera sensor without
              any additional conversions or decrease in framerate.

              See android.scaler.availableInputOutputFormatsMap for the full set of
              performance guarantees.
              </notes>
            </value>
            <value optional="true" id="0x32315659">YV12
              <notes>YCrCb 4:2:0 Planar</notes>
            </value>
            <value optional="true" id="0x11">YCrCb_420_SP
              <notes>NV21</notes>
            </value>
            <value id="0x22">IMPLEMENTATION_DEFINED
              <notes>System internal format, not application-accessible</notes>
            </value>
            <value id="0x23">YCbCr_420_888
              <notes>Flexible YUV420 Format</notes>
            </value>
            <value id="0x21">BLOB
              <notes>JPEG format</notes>
            </value>
          </enum>
          <description>The list of image formats that are supported by this
          camera device for output streams.</description>
          <deprecation_description>
          Not used in HALv3 or newer
          </deprecation_description>
          <details>
          All camera devices will support JPEG and YUV_420_888 formats.

          When set to YUV_420_888, application can access the YUV420 data directly.
          </details>
          <hal_details>
          These format values are from HAL_PIXEL_FORMAT_* in
          system/core/include/system/graphics.h.

          When IMPLEMENTATION_DEFINED is used, the platform
          gralloc module will select a format based on the usage flags provided
          by the camera HAL device and the other endpoint of the stream. It is
          usually used by preview and recording streams, where the application doesn't
          need access the image data.

          YCbCr_420_888 format must be supported by the HAL. When an image stream
          needs CPU/application direct access, this format will be used.

          The BLOB format must be supported by the HAL. This is used for the JPEG stream.

          A RAW_OPAQUE buffer should contain only pixel data. It is strongly
          recommended that any information used by the camera device when
          processing images is fully expressed by the result metadata
          for that image buffer.
          </hal_details>
          <tag id="BC" />
        </entry>
        <entry name="availableJpegMinDurations" type="int64" visibility="hidden" deprecated="true"
        container="array">
          <array>
            <size>n</size>
          </array>
          <description>The minimum frame duration that is supported
          for each resolution in android.scaler.availableJpegSizes.
          </description>
          <deprecation_description>
          Not used in HALv3 or newer
          </deprecation_description>
          <units>Nanoseconds</units>
          <range>TODO: Remove property.</range>
          <details>
          This corresponds to the minimum steady-state frame duration when only
          that JPEG stream is active and captured in a burst, with all
          processing (typically in android.*.mode) set to FAST.

          When multiple streams are configured, the minimum
          frame duration will be &amp;gt;= max(individual stream min
          durations)</details>
          <tag id="BC" />
        </entry>
        <entry name="availableJpegSizes" type="int32" visibility="hidden"
        deprecated="true" container="array" typedef="size">
          <array>
            <size>n</size>
            <size>2</size>
          </array>
          <description>The JPEG resolutions that are supported by this camera device.</description>
          <deprecation_description>
          Not used in HALv3 or newer
          </deprecation_description>
          <range>TODO: Remove property.</range>
          <details>
          The resolutions are listed as `(width, height)` pairs. All camera devices will support
          sensor maximum resolution (defined by android.sensor.info.activeArraySize).
          </details>
          <hal_details>
          The HAL must include sensor maximum resolution
          (defined by android.sensor.info.activeArraySize),
          and should include half/quarter of sensor maximum resolution.
          </hal_details>
          <tag id="BC" />
        </entry>
        <entry name="availableMaxDigitalZoom" type="float" visibility="public"
              hwlevel="legacy">
          <description>The maximum ratio between both active area width
          and crop region width, and active area height and
          crop region height, for android.scaler.cropRegion.
          </description>
          <units>Zoom scale factor</units>
          <range>&amp;gt;=1</range>
          <details>
          This represents the maximum amount of zooming possible by
          the camera device, or equivalently, the minimum cropping
          window size.

          Crop regions that have a width or height that is smaller
          than this ratio allows will be rounded up to the minimum
          allowed size by the camera device.
          </details>
          <tag id="BC" />
        </entry>
        <entry name="availableProcessedMinDurations" type="int64" visibility="hidden" deprecated="true"
        container="array">
          <array>
            <size>n</size>
          </array>
          <description>For each available processed output size (defined in
          android.scaler.availableProcessedSizes), this property lists the
          minimum supportable frame duration for that size.
          </description>
          <deprecation_description>
          Not used in HALv3 or newer
          </deprecation_description>
          <units>Nanoseconds</units>
          <details>
          This should correspond to the frame duration when only that processed
          stream is active, with all processing (typically in android.*.mode)
          set to FAST.

          When multiple streams are configured, the minimum frame duration will
          be &amp;gt;= max(individual stream min durations).
          </details>
          <tag id="BC" />
        </entry>
        <entry name="availableProcessedSizes" type="int32" visibility="hidden"
        deprecated="true" container="array" typedef="size">
          <array>
            <size>n</size>
            <size>2</size>
          </array>
          <description>The resolutions available for use with
          processed output streams, such as YV12, NV12, and
          platform opaque YUV/RGB streams to the GPU or video
          encoders.</description>
          <deprecation_description>
          Not used in HALv3 or newer
          </deprecation_description>
          <details>
          The resolutions are listed as `(width, height)` pairs.

          For a given use case, the actual maximum supported resolution
          may be lower than what is listed here, depending on the destination
          Surface for the image data. For example, for recording video,
          the video encoder chosen may have a maximum size limit (e.g. 1080p)
          smaller than what the camera (e.g. maximum resolution is 3264x2448)
          can provide.

          Please reference the documentation for the image data destination to
          check if it limits the maximum size for image data.
          </details>
          <hal_details>
          For FULL capability devices (`android.info.supportedHardwareLevel == FULL`),
          the HAL must include all JPEG sizes listed in android.scaler.availableJpegSizes
          and each below resolution if it is smaller than or equal to the sensor
          maximum resolution (if they are not listed in JPEG sizes already):

          * 240p (320 x 240)
          * 480p (640 x 480)
          * 720p (1280 x 720)
          * 1080p (1920 x 1080)

          For LIMITED capability devices (`android.info.supportedHardwareLevel == LIMITED`),
          the HAL only has to list up to the maximum video size supported by the devices.
          </hal_details>
          <tag id="BC" />
        </entry>
        <entry name="availableRawMinDurations" type="int64" deprecated="true"
        container="array">
          <array>
            <size>n</size>
          </array>
          <description>
          For each available raw output size (defined in
          android.scaler.availableRawSizes), this property lists the minimum
          supportable frame duration for that size.
          </description>
          <deprecation_description>
          Not used in HALv3 or newer
          </deprecation_description>
          <units>Nanoseconds</units>
          <details>
          Should correspond to the frame duration when only the raw stream is
          active.

          When multiple streams are configured, the minimum
          frame duration will be &amp;gt;= max(individual stream min
          durations)</details>
          <tag id="BC" />
        </entry>
        <entry name="availableRawSizes" type="int32" deprecated="true"
        container="array" typedef="size">
          <array>
            <size>n</size>
            <size>2</size>
          </array>
          <description>The resolutions available for use with raw
          sensor output streams, listed as width,
          height</description>
          <deprecation_description>
          Not used in HALv3 or newer
          </deprecation_description>
        </entry>
      </static>
      <dynamic>
        <clone entry="android.scaler.cropRegion" kind="controls">
        </clone>
      </dynamic>
      <static>
        <entry name="availableInputOutputFormatsMap" type="int32" visibility="hidden"
          typedef="reprocessFormatsMap">
          <description>The mapping of image formats that are supported by this
          camera device for input streams, to their corresponding output formats.
          </description>
          <details>
          All camera devices with at least 1
          android.request.maxNumInputStreams will have at least one
          available input format.

          The camera device will support the following map of formats,
          if its dependent capability (android.request.availableCapabilities) is supported:

            Input Format                                    | Output Format                                     | Capability
          :-------------------------------------------------|:--------------------------------------------------|:----------
          {@link android.graphics.ImageFormat#PRIVATE}      | {@link android.graphics.ImageFormat#JPEG}         | PRIVATE_REPROCESSING
          {@link android.graphics.ImageFormat#PRIVATE}      | {@link android.graphics.ImageFormat#YUV_420_888}  | PRIVATE_REPROCESSING
          {@link android.graphics.ImageFormat#YUV_420_888}  | {@link android.graphics.ImageFormat#JPEG}         | YUV_REPROCESSING
          {@link android.graphics.ImageFormat#YUV_420_888}  | {@link android.graphics.ImageFormat#YUV_420_888}  | YUV_REPROCESSING

          PRIVATE refers to a device-internal format that is not directly application-visible.  A
          PRIVATE input surface can be acquired by {@link android.media.ImageReader#newInstance}
          with {@link android.graphics.ImageFormat#PRIVATE} as the format.

          For a PRIVATE_REPROCESSING-capable camera device, using the PRIVATE format as either input
          or output will never hurt maximum frame rate (i.e.  {@link
          android.hardware.camera2.params.StreamConfigurationMap#getOutputStallDuration
          getOutputStallDuration(ImageFormat.PRIVATE, size)} is always 0),

          Attempting to configure an input stream with output streams not
          listed as available in this map is not valid.
          </details>
          <hal_details>
          For the formats, see `system/core/include/system/graphics.h` for a definition
          of the image format enumerations. The PRIVATE format refers to the
          HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED format. The HAL could determine
          the actual format by using the gralloc usage flags.
          For ZSL use case in particular, the HAL could choose appropriate format (partially
          processed YUV or RAW based format) by checking the format and GRALLOC_USAGE_HW_CAMERA_ZSL.
          See camera3.h for more details.

          This value is encoded as a variable-size array-of-arrays.
          The inner array always contains `[format, length, ...]` where
          `...` has `length` elements. An inner array is followed by another
          inner array if the total metadata entry size hasn't yet been exceeded.

          A code sample to read/write this encoding (with a device that
          supports reprocessing IMPLEMENTATION_DEFINED to YUV_420_888, and JPEG,
          and reprocessing YUV_420_888 to YUV_420_888 and JPEG):

              // reading
              int32_t* contents = &amp;entry.i32[0];
              for (size_t i = 0; i &lt; entry.count; ) {
                  int32_t format = contents[i++];
                  int32_t length = contents[i++];
                  int32_t output_formats[length];
                  memcpy(&amp;output_formats[0], &amp;contents[i],
                         length * sizeof(int32_t));
                  i += length;
              }

              // writing (static example, PRIVATE_REPROCESSING + YUV_REPROCESSING)
              int32_t[] contents = {
                IMPLEMENTATION_DEFINED, 2, YUV_420_888, BLOB,
                YUV_420_888, 2, YUV_420_888, BLOB,
              };
              update_camera_metadata_entry(metadata, index, &amp;contents[0],
                    sizeof(contents)/sizeof(contents[0]), &amp;updated_entry);

          If the HAL claims to support any of the capabilities listed in the
          above details, then it must also support all the input-output
          combinations listed for that capability. It can optionally support
          additional formats if it so chooses.
          </hal_details>
          <tag id="REPROC" />
        </entry>
        <entry name="availableStreamConfigurations" type="int32" visibility="ndk_public"
               enum="true" container="array" typedef="streamConfiguration" hwlevel="legacy">
          <array>
            <size>n</size>
            <size>4</size>
          </array>
          <enum>
            <value>OUTPUT</value>
            <value>INPUT</value>
          </enum>
          <description>The available stream configurations that this
          camera device supports
          (i.e. format, width, height, output/input stream).
          </description>
          <details>
          The configurations are listed as `(format, width, height, input?)`
          tuples.

          For a given use case, the actual maximum supported resolution
          may be lower than what is listed here, depending on the destination
          Surface for the image data. For example, for recording video,
          the video encoder chosen may have a maximum size limit (e.g. 1080p)
          smaller than what the camera (e.g. maximum resolution is 3264x2448)
          can provide.

          Please reference the documentation for the image data destination to
          check if it limits the maximum size for image data.

          Not all output formats may be supported in a configuration with
          an input stream of a particular format. For more details, see
          android.scaler.availableInputOutputFormatsMap.

          The following table describes the minimum required output stream
          configurations based on the hardware level
          (android.info.supportedHardwareLevel):

          Format         | Size                                         | Hardware Level | Notes
          :-------------:|:--------------------------------------------:|:--------------:|:--------------:
          JPEG           | android.sensor.info.activeArraySize          | Any            |
          JPEG           | 1920x1080 (1080p)                            | Any            | if 1080p &lt;= activeArraySize
          JPEG           | 1280x720 (720)                               | Any            | if 720p &lt;= activeArraySize
          JPEG           | 640x480 (480p)                               | Any            | if 480p &lt;= activeArraySize
          JPEG           | 320x240 (240p)                               | Any            | if 240p &lt;= activeArraySize
          YUV_420_888    | all output sizes available for JPEG          | FULL           |
          YUV_420_888    | all output sizes available for JPEG, up to the maximum video size | LIMITED        |
          IMPLEMENTATION_DEFINED | same as YUV_420_888                  | Any            |

          Refer to android.request.availableCapabilities for additional
          mandatory stream configurations on a per-capability basis.
          </details>
          <hal_details>
          It is recommended (but not mandatory) to also include half/quarter
          of sensor maximum resolution for JPEG formats (regardless of hardware
          level).

          (The following is a rewording of the above required table):

          For JPEG format, the sizes may be restricted by below conditions:

          * The HAL may choose the aspect ratio of each Jpeg size to be one of well known ones
          (e.g. 4:3, 16:9, 3:2 etc.). If the sensor maximum resolution
          (defined by android.sensor.info.activeArraySize) has an aspect ratio other than these,
          it does not have to be included in the supported JPEG sizes.
          * Some hardware JPEG encoders may have pixel boundary alignment requirements, such as
          the dimensions being a multiple of 16.

          Therefore, the maximum JPEG size may be smaller than sensor maximum resolution.
          However, the largest JPEG size must be as close as possible to the sensor maximum
          resolution given above constraints. It is required that after aspect ratio adjustments,
          additional size reduction due to other issues must be less than 3% in area. For example,
          if the sensor maximum resolution is 3280x2464, if the maximum JPEG size has aspect
          ratio 4:3, the JPEG encoder alignment requirement is 16, the maximum JPEG size will be
          3264x2448.

          For FULL capability devices (`android.info.supportedHardwareLevel == FULL`),
          the HAL must include all YUV_420_888 sizes that have JPEG sizes listed
          here as output streams.

          It must also include each below resolution if it is smaller than or
          equal to the sensor maximum resolution (for both YUV_420_888 and JPEG
          formats), as output streams:

          * 240p (320 x 240)
          * 480p (640 x 480)
          * 720p (1280 x 720)
          * 1080p (1920 x 1080)

          For LIMITED capability devices
          (`android.info.supportedHardwareLevel == LIMITED`),
          the HAL only has to list up to the maximum video size
          supported by the device.

          Regardless of hardware level, every output resolution available for
          YUV_420_888 must also be available for IMPLEMENTATION_DEFINED.

          This supercedes the following fields, which are now deprecated:

          * availableFormats
          * available[Processed,Raw,Jpeg]Sizes
          </hal_details>
        </entry>
        <entry name="availableMinFrameDurations" type="int64" visibility="ndk_public"
               container="array" typedef="streamConfigurationDuration" hwlevel="legacy">
          <array>
            <size>4</size>
            <size>n</size>
          </array>
          <description>This lists the minimum frame duration for each
          format/size combination.
          </description>
          <units>(format, width, height, ns) x n</units>
          <details>
          This should correspond to the frame duration when only that
          stream is active, with all processing (typically in android.*.mode)
          set to either OFF or FAST.

          When multiple streams are used in a request, the minimum frame
          duration will be max(individual stream min durations).

          The minimum frame duration of a stream (of a particular format, size)
          is the same regardless of whether the stream is input or output.

          See android.sensor.frameDuration and
          android.scaler.availableStallDurations for more details about
          calculating the max frame rate.
          </details>
          <tag id="V1" />
        </entry>
        <entry name="availableStallDurations" type="int64" visibility="ndk_public"
               container="array" typedef="streamConfigurationDuration" hwlevel="legacy">
          <array>
            <size>4</size>
            <size>n</size>
          </array>
          <description>This lists the maximum stall duration for each
          output format/size combination.
          </description>
          <units>(format, width, height, ns) x n</units>
          <details>
          A stall duration is how much extra time would get added
          to the normal minimum frame duration for a repeating request
          that has streams with non-zero stall.

          For example, consider JPEG captures which have the following
          characteristics:

          * JPEG streams act like processed YUV streams in requests for which
          they are not included; in requests in which they are directly
          referenced, they act as JPEG streams. This is because supporting a
          JPEG stream requires the underlying YUV data to always be ready for
          use by a JPEG encoder, but the encoder will only be used (and impact
          frame duration) on requests that actually reference a JPEG stream.
          * The JPEG processor can run concurrently to the rest of the camera
          pipeline, but cannot process more than 1 capture at a time.

          In other words, using a repeating YUV request would result
          in a steady frame rate (let's say it's 30 FPS). If a single
          JPEG request is submitted periodically, the frame rate will stay
          at 30 FPS (as long as we wait for the previous JPEG to return each
          time). If we try to submit a repeating YUV + JPEG request, then
          the frame rate will drop from 30 FPS.

          In general, submitting a new request with a non-0 stall time
          stream will _not_ cause a frame rate drop unless there are still
          outstanding buffers for that stream from previous requests.

          Submitting a repeating request with streams (call this `S`)
          is the same as setting the minimum frame duration from
          the normal minimum frame duration corresponding to `S`, added with
          the maximum stall duration for `S`.

          If interleaving requests with and without a stall duration,
          a request will stall by the maximum of the remaining times
          for each can-stall stream with outstanding buffers.

          This means that a stalling request will not have an exposure start
          until the stall has completed.

          This should correspond to the stall duration when only that stream is
          active, with all processing (typically in android.*.mode) set to FAST
          or OFF. Setting any of the processing modes to HIGH_QUALITY
          effectively results in an indeterminate stall duration for all
          streams in a request (the regular stall calculation rules are
          ignored).

          The following formats may always have a stall duration:

          * {@link android.graphics.ImageFormat#JPEG|AIMAGE_FORMAT_JPEG}
          * {@link android.graphics.ImageFormat#RAW_SENSOR|AIMAGE_FORMAT_RAW16}

          The following formats will never have a stall duration:

          * {@link android.graphics.ImageFormat#YUV_420_888|AIMAGE_FORMAT_YUV_420_888}
          * {@link android.graphics.ImageFormat#RAW10|AIMAGE_FORMAT_RAW10}
          * {@link android.graphics.ImageFormat#RAW12|AIMAGE_FORMAT_RAW12}

          All other formats may or may not have an allowed stall duration on
          a per-capability basis; refer to android.request.availableCapabilities
          for more details.

          See android.sensor.frameDuration for more information about
          calculating the max frame rate (absent stalls).
          </details>
          <hal_details>
          If possible, it is recommended that all non-JPEG formats
          (such as RAW16) should not have a stall duration. RAW10, RAW12, RAW_OPAQUE
          and IMPLEMENTATION_DEFINED must not have stall durations.
          </hal_details>
          <tag id="V1" />
        </entry>
        <entry name="streamConfigurationMap" type="int32" visibility="java_public"
               synthetic="true" typedef="streamConfigurationMap"
               hwlevel="legacy">
          <description>The available stream configurations that this
          camera device supports; also includes the minimum frame durations
          and the stall durations for each format/size combination.
          </description>
          <details>
          All camera devices will support sensor maximum resolution (defined by
          android.sensor.info.activeArraySize) for the JPEG format.

          For a given use case, the actual maximum supported resolution
          may be lower than what is listed here, depending on the destination
          Surface for the image data. For example, for recording video,
          the video encoder chosen may have a maximum size limit (e.g. 1080p)
          smaller than what the camera (e.g. maximum resolution is 3264x2448)
          can provide.

          Please reference the documentation for the image data destination to
          check if it limits the maximum size for image data.

          The following table describes the minimum required output stream
          configurations based on the hardware level
          (android.info.supportedHardwareLevel):

          Format                                             | Size                                         | Hardware Level | Notes
          :-------------------------------------------------:|:--------------------------------------------:|:--------------:|:--------------:
          {@link android.graphics.ImageFormat#JPEG}          | android.sensor.info.activeArraySize (*1)     | Any            |
          {@link android.graphics.ImageFormat#JPEG}          | 1920x1080 (1080p)                            | Any            | if 1080p &lt;= activeArraySize
          {@link android.graphics.ImageFormat#JPEG}          | 1280x720 (720p)                               | Any            | if 720p &lt;= activeArraySize
          {@link android.graphics.ImageFormat#JPEG}          | 640x480 (480p)                               | Any            | if 480p &lt;= activeArraySize
          {@link android.graphics.ImageFormat#JPEG}          | 320x240 (240p)                               | Any            | if 240p &lt;= activeArraySize
          {@link android.graphics.ImageFormat#YUV_420_888}   | all output sizes available for JPEG          | FULL           |
          {@link android.graphics.ImageFormat#YUV_420_888}   | all output sizes available for JPEG, up to the maximum video size | LIMITED        |
          {@link android.graphics.ImageFormat#PRIVATE}       | same as YUV_420_888                          | Any            |

          Refer to android.request.availableCapabilities and {@link
          android.hardware.camera2.CameraDevice#createCaptureSession} for additional mandatory
          stream configurations on a per-capability basis.

          *1: For JPEG format, the sizes may be restricted by below conditions:

          * The HAL may choose the aspect ratio of each Jpeg size to be one of well known ones
          (e.g. 4:3, 16:9, 3:2 etc.). If the sensor maximum resolution
          (defined by android.sensor.info.activeArraySize) has an aspect ratio other than these,
          it does not have to be included in the supported JPEG sizes.
          * Some hardware JPEG encoders may have pixel boundary alignment requirements, such as
          the dimensions being a multiple of 16.
          Therefore, the maximum JPEG size may be smaller than sensor maximum resolution.
          However, the largest JPEG size will be as close as possible to the sensor maximum
          resolution given above constraints. It is required that after aspect ratio adjustments,
          additional size reduction due to other issues must be less than 3% in area. For example,
          if the sensor maximum resolution is 3280x2464, if the maximum JPEG size has aspect
          ratio 4:3, and the JPEG encoder alignment requirement is 16, the maximum JPEG size will be
          3264x2448.
          </details>
          <hal_details>
          Do not set this property directly
          (it is synthetic and will not be available at the HAL layer);
          set the android.scaler.availableStreamConfigurations instead.

          Not all output formats may be supported in a configuration with
          an input stream of a particular format. For more details, see
          android.scaler.availableInputOutputFormatsMap.

          It is recommended (but not mandatory) to also include half/quarter
          of sensor maximum resolution for JPEG formats (regardless of hardware
          level).

          (The following is a rewording of the above required table):

          The HAL must include sensor maximum resolution (defined by
          android.sensor.info.activeArraySize).

          For FULL capability devices (`android.info.supportedHardwareLevel == FULL`),
          the HAL must include all YUV_420_888 sizes that have JPEG sizes listed
          here as output streams.

          It must also include each below resolution if it is smaller than or
          equal to the sensor maximum resolution (for both YUV_420_888 and JPEG
          formats), as output streams:

          * 240p (320 x 240)
          * 480p (640 x 480)
          * 720p (1280 x 720)
          * 1080p (1920 x 1080)

          For LIMITED capability devices
          (`android.info.supportedHardwareLevel == LIMITED`),
          the HAL only has to list up to the maximum video size
          supported by the device.

          Regardless of hardware level, every output resolution available for
          YUV_420_888 must also be available for IMPLEMENTATION_DEFINED.

          This supercedes the following fields, which are now deprecated:

          * availableFormats
          * available[Processed,Raw,Jpeg]Sizes
          </hal_details>
        </entry>
        <entry name="croppingType" type="byte" visibility="public" enum="true"
               hwlevel="legacy">
          <enum>
            <value>CENTER_ONLY
              <notes>
                The camera device only supports centered crop regions.
              </notes>
            </value>
            <value>FREEFORM
              <notes>
                The camera device supports arbitrarily chosen crop regions.
              </notes>
            </value>
          </enum>
          <description>The crop type that this camera device supports.</description>
          <details>
          When passing a non-centered crop region (android.scaler.cropRegion) to a camera
          device that only supports CENTER_ONLY cropping, the camera device will move the
          crop region to the center of the sensor active array (android.sensor.info.activeArraySize)
          and keep the crop region width and height unchanged. The camera device will return the
          final used crop region in metadata result android.scaler.cropRegion.

          Camera devices that support FREEFORM cropping will support any crop region that
          is inside of the active array. The camera device will apply the same crop region and
          return the final used crop region in capture result metadata android.scaler.cropRegion.

          LEGACY capability devices will only support CENTER_ONLY cropping.
          </details>
        </entry>
      </static>
    </section>
    <section name="sensor">
      <controls>
        <entry name="exposureTime" type="int64" visibility="public" hwlevel="full">
          <description>Duration each pixel is exposed to
          light.</description>
          <units>Nanoseconds</units>
          <range>android.sensor.info.exposureTimeRange</range>
          <details>If the sensor can't expose this exact duration, it will shorten the
          duration exposed to the nearest possible value (rather than expose longer).
          The final exposure time used will be available in the output capture result.

          This control is only effective if android.control.aeMode or android.control.mode is set to
          OFF; otherwise the auto-exposure algorithm will override this value.
          </details>
          <tag id="V1" />
        </entry>
        <entry name="frameDuration" type="int64" visibility="public" hwlevel="full">
          <description>Duration from start of frame exposure to
          start of next frame exposure.</description>
          <units>Nanoseconds</units>
          <range>See android.sensor.info.maxFrameDuration, {@link
          android.hardware.camera2.params.StreamConfigurationMap|ACAMERA_SCALER_AVAILABLE_MIN_FRAME_DURATIONS}.
          The duration is capped to `max(duration, exposureTime + overhead)`.</range>
          <details>
          The maximum frame rate that can be supported by a camera subsystem is
          a function of many factors:

          * Requested resolutions of output image streams
          * Availability of binning / skipping modes on the imager
          * The bandwidth of the imager interface
          * The bandwidth of the various ISP processing blocks

          Since these factors can vary greatly between different ISPs and
          sensors, the camera abstraction tries to represent the bandwidth
          restrictions with as simple a model as possible.

          The model presented has the following characteristics:

          * The image sensor is always configured to output the smallest
          resolution possible given the application's requested output stream
          sizes.  The smallest resolution is defined as being at least as large
          as the largest requested output stream size; the camera pipeline must
          never digitally upsample sensor data when the crop region covers the
          whole sensor. In general, this means that if only small output stream
          resolutions are configured, the sensor can provide a higher frame
          rate.
          * Since any request may use any or all the currently configured
          output streams, the sensor and ISP must be configured to support
          scaling a single capture to all the streams at the same time.  This
          means the camera pipeline must be ready to produce the largest
          requested output size without any delay.  Therefore, the overall
          frame rate of a given configured stream set is governed only by the
          largest requested stream resolution.
          * Using more than one output stream in a request does not affect the
          frame duration.
          * Certain format-streams may need to do additional background processing
          before data is consumed/produced by that stream. These processors
          can run concurrently to the rest of the camera pipeline, but
          cannot process more than 1 capture at a time.

          The necessary information for the application, given the model above, is provided via
          {@link
          android.hardware.camera2.params.StreamConfigurationMap#getOutputMinFrameDuration|ACAMERA_SCALER_AVAILABLE_MIN_FRAME_DURATIONS}.
          These are used to determine the maximum frame rate / minimum frame duration that is
          possible for a given stream configuration.

          Specifically, the application can use the following rules to
          determine the minimum frame duration it can request from the camera
          device:

          1. Let the set of currently configured input/output streams be called `S`.
          1. Find the minimum frame durations for each stream in `S`, by looking it up in {@link
          android.hardware.camera2.params.StreamConfigurationMap#getOutputMinFrameDuration|ACAMERA_SCALER_AVAILABLE_MIN_FRAME_DURATIONS}
          (with its respective size/format). Let this set of frame durations be called `F`.
          1. For any given request `R`, the minimum frame duration allowed for `R` is the maximum
          out of all values in `F`. Let the streams used in `R` be called `S_r`.

          If none of the streams in `S_r` have a stall time (listed in {@link
          android.hardware.camera2.params.StreamConfigurationMap#getOutputStallDuration|ACAMERA_SCALER_AVAILABLE_STALL_DURATIONS}
          using its respective size/format), then the frame duration in `F` determines the steady
          state frame rate that the application will get if it uses `R` as a repeating request. Let
          this special kind of request be called `Rsimple`.

          A repeating request `Rsimple` can be _occasionally_ interleaved by a single capture of a
          new request `Rstall` (which has at least one in-use stream with a non-0 stall time) and if
          `Rstall` has the same minimum frame duration this will not cause a frame rate loss if all
          buffers from the previous `Rstall` have already been delivered.

          For more details about stalling, see {@link
          android.hardware.camera2.params.StreamConfigurationMap#getOutputStallDuration|ACAMERA_SCALER_AVAILABLE_STALL_DURATIONS}.

          This control is only effective if android.control.aeMode or android.control.mode is set to
          OFF; otherwise the auto-exposure algorithm will override this value.
          </details>
          <hal_details>
          For more details about stalling, see
          android.scaler.availableStallDurations.
          </hal_details>
          <tag id="V1" />
        </entry>
        <entry name="sensitivity" type="int32" visibility="public" hwlevel="full">
          <description>The amount of gain applied to sensor data
          before processing.</description>
          <units>ISO arithmetic units</units>
          <range>android.sensor.info.sensitivityRange</range>
          <details>
          The sensitivity is the standard ISO sensitivity value,
          as defined in ISO 12232:2006.

          The sensitivity must be within android.sensor.info.sensitivityRange, and
          if if it less than android.sensor.maxAnalogSensitivity, the camera device
          is guaranteed to use only analog amplification for applying the gain.

          If the camera device cannot apply the exact sensitivity
          requested, it will reduce the gain to the nearest supported
          value. The final sensitivity used will be available in the
          output capture result.

          This control is only effective if android.control.aeMode or android.control.mode is set to
          OFF; otherwise the auto-exposure algorithm will override this value.
          </details>
          <hal_details>ISO 12232:2006 REI method is acceptable.</hal_details>
          <tag id="V1" />
        </entry>
      </controls>
      <static>
        <namespace name="info">
          <entry name="activeArraySize" type="int32" visibility="public"
          type_notes="Four ints defining the active pixel rectangle"
          container="array" typedef="rectangle" hwlevel="legacy">
            <array>
              <size>4</size>
            </array>
            <description>
            The area of the image sensor which corresponds to active pixels after any geometric
            distortion correction has been applied.
            </description>
            <units>Pixel coordinates on the image sensor</units>
            <details>
            This is the rectangle representing the size of the active region of the sensor (i.e.
            the region that actually receives light from the scene) after any geometric correction
            has been applied, and should be treated as the maximum size in pixels of any of the
            image output formats aside from the raw formats.

            This rectangle is defined relative to the full pixel array; (0,0) is the top-left of
            the full pixel array, and the size of the full pixel array is given by
            android.sensor.info.pixelArraySize.

            The coordinate system for most other keys that list pixel coordinates, including
            android.scaler.cropRegion, is defined relative to the active array rectangle given in
            this field, with `(0, 0)` being the top-left of this rectangle.

            The active array may be smaller than the full pixel array, since the full array may
            include black calibration pixels or other inactive regions, and geometric correction
            resulting in scaling or cropping may have been applied.
            </details>
            <ndk_details>
            The data representation is `int[4]`, which maps to `(left, top, width, height)`.
            </ndk_details>
            <hal_details>
            This array contains `(xmin, ymin, width, height)`. The `(xmin, ymin)` must be
            &amp;gt;= `(0,0)`.
            The `(width, height)` must be &amp;lt;= `android.sensor.info.pixelArraySize`.
            </hal_details>
            <tag id="RAW" />
          </entry>
          <entry name="sensitivityRange" type="int32" visibility="public"
          type_notes="Range of supported sensitivities"
          container="array" typedef="rangeInt"
          hwlevel="full">
            <array>
              <size>2</size>
            </array>
            <description>Range of sensitivities for android.sensor.sensitivity supported by this
            camera device.</description>
            <range>Min &lt;= 100, Max &amp;gt;= 800</range>
            <details>
              The values are the standard ISO sensitivity values,
              as defined in ISO 12232:2006.
            </details>

            <tag id="BC" />
            <tag id="V1" />
          </entry>
          <entry name="colorFilterArrangement" type="byte" visibility="public" enum="true"
            hwlevel="full">
            <enum>
              <value>RGGB</value>
              <value>GRBG</value>
              <value>GBRG</value>
              <value>BGGR</value>
              <value>RGB
              <notes>Sensor is not Bayer; output has 3 16-bit
              values for each pixel, instead of just 1 16-bit value
              per pixel.</notes></value>
            </enum>
            <description>The arrangement of color filters on sensor;
            represents the colors in the top-left 2x2 section of
            the sensor, in reading order.</description>
            <tag id="RAW" />
          </entry>
          <entry name="exposureTimeRange" type="int64" visibility="public"
                 type_notes="nanoseconds" container="array" typedef="rangeLong"
                 hwlevel="full">
            <array>
              <size>2</size>
            </array>
            <description>The range of image exposure times for android.sensor.exposureTime supported
            by this camera device.
            </description>
            <units>Nanoseconds</units>
            <range>The minimum exposure time will be less than 100 us. For FULL
            capability devices (android.info.supportedHardwareLevel == FULL),
            the maximum exposure time will be greater than 100ms.</range>
            <hal_details>For FULL capability devices (android.info.supportedHardwareLevel == FULL),
            The maximum of the range SHOULD be at least 1 second (1e9), MUST be at least
            100ms.
            </hal_details>
            <tag id="V1" />
          </entry>
          <entry name="maxFrameDuration" type="int64" visibility="public"
                 hwlevel="full">
            <description>The maximum possible frame duration (minimum frame rate) for
            android.sensor.frameDuration that is supported this camera device.</description>
            <units>Nanoseconds</units>
            <range>For FULL capability devices
            (android.info.supportedHardwareLevel == FULL), at least 100ms.
            </range>
            <details>Attempting to use frame durations beyond the maximum will result in the frame
            duration being clipped to the maximum. See that control for a full definition of frame
            durations.

            Refer to {@link
            android.hardware.camera2.params.StreamConfigurationMap#getOutputMinFrameDuration|ACAMERA_SCALER_AVAILABLE_MIN_FRAME_DURATIONS}
            for the minimum frame duration values.
            </details>
            <hal_details>
            For FULL capability devices (android.info.supportedHardwareLevel == FULL),
            The maximum of the range SHOULD be at least
            1 second (1e9), MUST be at least 100ms (100e6).

            android.sensor.info.maxFrameDuration must be greater or
            equal to the android.sensor.info.exposureTimeRange max
            value (since exposure time overrides frame duration).

            Available minimum frame durations for JPEG must be no greater
            than that of the YUV_420_888/IMPLEMENTATION_DEFINED
            minimum frame durations (for that respective size).

            Since JPEG processing is considered offline and can take longer than
            a single uncompressed capture, refer to
            android.scaler.availableStallDurations
            for details about encoding this scenario.
            </hal_details>
            <tag id="V1" />
          </entry>
          <entry name="physicalSize" type="float" visibility="public"
          type_notes="width x height"
          container="array" typedef="sizeF" hwlevel="legacy">
            <array>
              <size>2</size>
            </array>
            <description>The physical dimensions of the full pixel
            array.</description>
            <units>Millimeters</units>
            <details>This is the physical size of the sensor pixel
            array defined by android.sensor.info.pixelArraySize.
            </details>
            <hal_details>Needed for FOV calculation for old API</hal_details>
            <tag id="V1" />
            <tag id="BC" />
          </entry>
          <entry name="pixelArraySize" type="int32" visibility="public"
          container="array" typedef="size" hwlevel="legacy">
            <array>
              <size>2</size>
            </array>
            <description>Dimensions of the full pixel array, possibly
            including black calibration pixels.</description>
            <units>Pixels</units>
            <details>The pixel count of the full pixel array of the image sensor, which covers
            android.sensor.info.physicalSize area.  This represents the full pixel dimensions of
            the raw buffers produced by this sensor.

            If a camera device supports raw sensor formats, either this or
            android.sensor.info.preCorrectionActiveArraySize is the maximum dimensions for the raw
            output formats listed in {@link
            android.hardware.camera2.params.StreamConfigurationMap|ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS}
            (this depends on whether or not the image sensor returns buffers containing pixels that
            are not part of the active array region for blacklevel calibration or other purposes).

            Some parts of the full pixel array may not receive light from the scene,
            or be otherwise inactive.  The android.sensor.info.preCorrectionActiveArraySize key
            defines the rectangle of active pixels that will be included in processed image
            formats.
            </details>
            <tag id="RAW" />
            <tag id="BC" />
          </entry>
          <entry name="whiteLevel" type="int32" visibility="public">
            <description>
            Maximum raw value output by sensor.
            </description>
            <range>&amp;gt; 255 (8-bit output)</range>
            <details>
            This specifies the fully-saturated encoding level for the raw
            sample values from the sensor.  This is typically caused by the
            sensor becoming highly non-linear or clipping. The minimum for
            each channel is specified by the offset in the
            android.sensor.blackLevelPattern key.

            The white level is typically determined either by sensor bit depth
            (8-14 bits is expected), or by the point where the sensor response
            becomes too non-linear to be useful.  The default value for this is
            maximum representable value for a 16-bit raw sample (2^16 - 1).

            The white level values of captured images may vary for different
            capture settings (e.g., android.sensor.sensitivity). This key
            represents a coarse approximation for such case. It is recommended
            to use android.sensor.dynamicWhiteLevel for captures when supported
            by the camera device, which provides more accurate white level values.
            </details>
            <hal_details>
            The full bit depth of the sensor must be available in the raw data,
            so the value for linear sensors should not be significantly lower
            than maximum raw value supported, i.e. 2^(sensor bits per pixel).
            </hal_details>
            <tag id="RAW" />
          </entry>
          <entry name="timestampSource" type="byte" visibility="public"
                 enum="true" hwlevel="legacy">
            <enum>
              <value>UNKNOWN
                <notes>
                Timestamps from android.sensor.timestamp are in nanoseconds and monotonic,
                but can not be compared to timestamps from other subsystems
                (e.g. accelerometer, gyro etc.), or other instances of the same or different
                camera devices in the same system. Timestamps between streams and results for
                a single camera instance are comparable, and the timestamps for all buffers
                and the result metadata generated by a single capture are identical.
                </notes>
              </value>
              <value>REALTIME
                <notes>
                Timestamps from android.sensor.timestamp are in the same timebase as
                {@link android.os.SystemClock#elapsedRealtimeNanos},
                and they can be compared to other timestamps using that base.
                </notes>
              </value>
            </enum>
            <description>The time base source for sensor capture start timestamps.</description>
            <details>
            The timestamps provided for captures are always in nanoseconds and monotonic, but
            may not based on a time source that can be compared to other system time sources.

            This characteristic defines the source for the timestamps, and therefore whether they
            can be compared against other system time sources/timestamps.
            </details>
            <hal_details>
            For camera devices implement UNKNOWN, the camera framework expects that the timestamp
            source to be SYSTEM_TIME_MONOTONIC. For camera devices implement REALTIME, the camera
            framework expects that the timestamp source to be SYSTEM_TIME_BOOTTIME. See
            system/core/include/utils/Timers.h for the definition of SYSTEM_TIME_MONOTONIC and
            SYSTEM_TIME_BOOTTIME. Note that HAL must follow above expectation; otherwise video
            recording might suffer unexpected behavior.

            Also, camera devices which implement REALTIME must pass the ITS sensor fusion test which
            tests the alignment between camera timestamps and gyro sensor timestamps.
            </hal_details>
          <tag id="V1" />
        </entry>
        <entry name="lensShadingApplied" type="byte" visibility="public" enum="true"
               typedef="boolean">
          <enum>
            <value>FALSE</value>
            <value>TRUE</value>
          </enum>
          <description>Whether the RAW images output from this camera device are subject to
          lens shading correction.</description>
          <details>
          If TRUE, all images produced by the camera device in the RAW image formats will
          have lens shading correction already applied to it. If FALSE, the images will
          not be adjusted for lens shading correction.
          See android.request.maxNumOutputRaw for a list of RAW image formats.

          This key will be `null` for all devices do not report this information.
          Devices with RAW capability will always report this information in this key.
          </details>
        </entry>
        <entry name="preCorrectionActiveArraySize" type="int32" visibility="public"
          type_notes="Four ints defining the active pixel rectangle" container="array"
          typedef="rectangle" hwlevel="legacy">
            <array>
              <size>4</size>
            </array>
            <description>
            The area of the image sensor which corresponds to active pixels prior to the
            application of any geometric distortion correction.
            </description>
            <units>Pixel coordinates on the image sensor</units>
            <details>
            This is the rectangle representing the size of the active region of the sensor (i.e.
            the region that actually receives light from the scene) before any geometric correction
            has been applied, and should be treated as the active region rectangle for any of the
            raw formats.  All metadata associated with raw processing (e.g. the lens shading
            correction map, and radial distortion fields) treats the top, left of this rectangle as
            the origin, (0,0).

            The size of this region determines the maximum field of view and the maximum number of
            pixels that an image from this sensor can contain, prior to the application of
            geometric distortion correction. The effective maximum pixel dimensions of a
            post-distortion-corrected image is given by the android.sensor.info.activeArraySize
            field, and the effective maximum field of view for a post-distortion-corrected image
            can be calculated by applying the geometric distortion correction fields to this
            rectangle, and cropping to the rectangle given in android.sensor.info.activeArraySize.

            E.g. to calculate position of a pixel, (x,y), in a processed YUV output image with the
            dimensions in android.sensor.info.activeArraySize given the position of a pixel,
            (x', y'), in the raw pixel array with dimensions give in
            android.sensor.info.pixelArraySize:

            1. Choose a pixel (x', y') within the active array region of the raw buffer given in
            android.sensor.info.preCorrectionActiveArraySize, otherwise this pixel is considered
            to be outside of the FOV, and will not be shown in the processed output image.
            1. Apply geometric distortion correction to get the post-distortion pixel coordinate,
            (x_i, y_i). When applying geometric correction metadata, note that metadata for raw
            buffers is defined relative to the top, left of the
            android.sensor.info.preCorrectionActiveArraySize rectangle.
            1. If the resulting corrected pixel coordinate is within the region given in
            android.sensor.info.activeArraySize, then the position of this pixel in the
            processed output image buffer is `(x_i - activeArray.left, y_i - activeArray.top)`,
            when the top, left coordinate of that buffer is treated as (0, 0).

            Thus, for pixel x',y' = (25, 25) on a sensor where android.sensor.info.pixelArraySize
            is (100,100), android.sensor.info.preCorrectionActiveArraySize is (10, 10, 100, 100),
            android.sensor.info.activeArraySize is (20, 20, 80, 80), and the geometric distortion
            correction doesn't change the pixel coordinate, the resulting pixel selected in
            pixel coordinates would be x,y = (25, 25) relative to the top,left of the raw buffer
            with dimensions given in android.sensor.info.pixelArraySize, and would be (5, 5)
            relative to the top,left of post-processed YUV output buffer with dimensions given in
            android.sensor.info.activeArraySize.

            The currently supported fields that correct for geometric distortion are:

            1. android.lens.distortion.

            If all of the geometric distortion fields are no-ops, this rectangle will be the same
            as the post-distortion-corrected rectangle given in
            android.sensor.info.activeArraySize.

            This rectangle is defined relative to the full pixel array; (0,0) is the top-left of
            the full pixel array, and the size of the full pixel array is given by
            android.sensor.info.pixelArraySize.

            The pre-correction active array may be smaller than the full pixel array, since the
            full array may include black calibration pixels or other inactive regions.
            </details>
            <ndk_details>
            The data representation is `int[4]`, which maps to `(left, top, width, height)`.
            </ndk_details>
            <hal_details>
            This array contains `(xmin, ymin, width, height)`. The `(xmin, ymin)` must be
            &amp;gt;= `(0,0)`.
            The `(width, height)` must be &amp;lt;= `android.sensor.info.pixelArraySize`.

            If omitted by the HAL implementation, the camera framework will assume that this is
            the same as the post-correction active array region given in
            android.sensor.info.activeArraySize.
            </hal_details>
            <tag id="RAW" />
          </entry>
        </namespace>
        <entry name="referenceIlluminant1" type="byte" visibility="public"
               enum="true">
          <enum>
            <value id="1">DAYLIGHT</value>
            <value id="2">FLUORESCENT</value>
            <value id="3">TUNGSTEN
              <notes>Incandescent light</notes>
            </value>
            <value id="4">FLASH</value>
            <value id="9">FINE_WEATHER</value>
            <value id="10">CLOUDY_WEATHER</value>
            <value id="11">SHADE</value>
            <value id="12">DAYLIGHT_FLUORESCENT
              <notes>D 5700 - 7100K</notes>
            </value>
            <value id="13">DAY_WHITE_FLUORESCENT
              <notes>N 4600 - 5400K</notes>
            </value>
            <value id="14">COOL_WHITE_FLUORESCENT
              <notes>W 3900 - 4500K</notes>
            </value>
            <value id="15">WHITE_FLUORESCENT
              <notes>WW 3200 - 3700K</notes>
            </value>
            <value id="17">STANDARD_A</value>
            <value id="18">STANDARD_B</value>
            <value id="19">STANDARD_C</value>
            <value id="20">D55</value>
            <value id="21">D65</value>
            <value id="22">D75</value>
            <value id="23">D50</value>
            <value id="24">ISO_STUDIO_TUNGSTEN</value>
          </enum>
          <description>
          The standard reference illuminant used as the scene light source when
          calculating the android.sensor.colorTransform1,
          android.sensor.calibrationTransform1, and
          android.sensor.forwardMatrix1 matrices.
          </description>
          <details>
          The values in this key correspond to the values defined for the
          EXIF LightSource tag. These illuminants are standard light sources
          that are often used calibrating camera devices.

          If this key is present, then android.sensor.colorTransform1,
          android.sensor.calibrationTransform1, and
          android.sensor.forwardMatrix1 will also be present.

          Some devices may choose to provide a second set of calibration
          information for improved quality, including
          android.sensor.referenceIlluminant2 and its corresponding matrices.
          </details>
          <hal_details>
          The first reference illuminant (android.sensor.referenceIlluminant1)
          and corresponding matrices must be present to support the RAW capability
          and DNG output.

          When producing raw images with a color profile that has only been
          calibrated against a single light source, it is valid to omit
          android.sensor.referenceIlluminant2 along with the
          android.sensor.colorTransform2, android.sensor.calibrationTransform2,
          and android.sensor.forwardMatrix2 matrices.

          If only android.sensor.referenceIlluminant1 is included, it should be
          chosen so that it is representative of typical scene lighting.  In
          general, D50 or DAYLIGHT will be chosen for this case.

          If both android.sensor.referenceIlluminant1 and
          android.sensor.referenceIlluminant2 are included, they should be
          chosen to represent the typical range of scene lighting conditions.
          In general, low color temperature illuminant such as Standard-A will
          be chosen for the first reference illuminant and a higher color
          temperature illuminant such as D65 will be chosen for the second
          reference illuminant.
          </hal_details>
          <tag id="RAW" />
        </entry>
        <entry name="referenceIlluminant2" type="byte" visibility="public">
          <description>
          The standard reference illuminant used as the scene light source when
          calculating the android.sensor.colorTransform2,
          android.sensor.calibrationTransform2, and
          android.sensor.forwardMatrix2 matrices.
          </description>
          <range>Any value listed in android.sensor.referenceIlluminant1</range>
          <details>
          See android.sensor.referenceIlluminant1 for more details.

          If this key is present, then android.sensor.colorTransform2,
          android.sensor.calibrationTransform2, and
          android.sensor.forwardMatrix2 will also be present.
          </details>
          <tag id="RAW" />
        </entry>
        <entry name="calibrationTransform1" type="rational"
        visibility="public" optional="true"
        type_notes="3x3 matrix in row-major-order" container="array"
        typedef="colorSpaceTransform">
          <array>
            <size>3</size>
            <size>3</size>
          </array>
          <description>
          A per-device calibration transform matrix that maps from the
          reference sensor colorspace to the actual device sensor colorspace.
          </description>
          <details>
          This matrix is used to correct for per-device variations in the
          sensor colorspace, and is used for processing raw buffer data.

          The matrix is expressed as a 3x3 matrix in row-major-order, and
          contains a per-device calibration transform that maps colors
          from reference sensor color space (i.e. the "golden module"
          colorspace) into this camera device's native sensor color
          space under the first reference illuminant
          (android.sensor.referenceIlluminant1).
          </details>
          <tag id="RAW" />
        </entry>
        <entry name="calibrationTransform2" type="rational"
        visibility="public" optional="true"
        type_notes="3x3 matrix in row-major-order" container="array"
        typedef="colorSpaceTransform">
          <array>
            <size>3</size>
            <size>3</size>
          </array>
          <description>
          A per-device calibration transform matrix that maps from the
          reference sensor colorspace to the actual device sensor colorspace
          (this is the colorspace of the raw buffer data).
          </description>
          <details>
          This matrix is used to correct for per-device variations in the
          sensor colorspace, and is used for processing raw buffer data.

          The matrix is expressed as a 3x3 matrix in row-major-order, and
          contains a per-device calibration transform that maps colors
          from reference sensor color space (i.e. the "golden module"
          colorspace) into this camera device's native sensor color
          space under the second reference illuminant
          (android.sensor.referenceIlluminant2).

          This matrix will only be present if the second reference
          illuminant is present.
          </details>
          <tag id="RAW" />
        </entry>
        <entry name="colorTransform1" type="rational"
        visibility="public" optional="true"
        type_notes="3x3 matrix in row-major-order" container="array"
        typedef="colorSpaceTransform">
          <array>
            <size>3</size>
            <size>3</size>
          </array>
          <description>
          A matrix that transforms color values from CIE XYZ color space to
          reference sensor color space.
          </description>
          <details>
          This matrix is used to convert from the standard CIE XYZ color
          space to the reference sensor colorspace, and is used when processing
          raw buffer data.

          The matrix is expressed as a 3x3 matrix in row-major-order, and
          contains a color transform matrix that maps colors from the CIE
          XYZ color space to the reference sensor color space (i.e. the
          "golden module" colorspace) under the first reference illuminant
          (android.sensor.referenceIlluminant1).

          The white points chosen in both the reference sensor color space
          and the CIE XYZ colorspace when calculating this transform will
          match the standard white point for the first reference illuminant
          (i.e. no chromatic adaptation will be applied by this transform).
          </details>
          <tag id="RAW" />
        </entry>
        <entry name="colorTransform2" type="rational"
        visibility="public" optional="true"
        type_notes="3x3 matrix in row-major-order" container="array"
        typedef="colorSpaceTransform">
          <array>
            <size>3</size>
            <size>3</size>
          </array>
          <description>
          A matrix that transforms color values from CIE XYZ color space to
          reference sensor color space.
          </description>
          <details>
          This matrix is used to convert from the standard CIE XYZ color
          space to the reference sensor colorspace, and is used when processing
          raw buffer data.

          The matrix is expressed as a 3x3 matrix in row-major-order, and
          contains a color transform matrix that maps colors from the CIE
          XYZ color space to the reference sensor color space (i.e. the
          "golden module" colorspace) under the second reference illuminant
          (android.sensor.referenceIlluminant2).

          The white points chosen in both the reference sensor color space
          and the CIE XYZ colorspace when calculating this transform will
          match the standard white point for the second reference illuminant
          (i.e. no chromatic adaptation will be applied by this transform).

          This matrix will only be present if the second reference
          illuminant is present.
          </details>
          <tag id="RAW" />
        </entry>
        <entry name="forwardMatrix1" type="rational"
        visibility="public" optional="true"
        type_notes="3x3 matrix in row-major-order" container="array"
        typedef="colorSpaceTransform">
          <array>
            <size>3</size>
            <size>3</size>
          </array>
          <description>
          A matrix that transforms white balanced camera colors from the reference
          sensor colorspace to the CIE XYZ colorspace with a D50 whitepoint.
          </description>
          <details>
          This matrix is used to convert to the standard CIE XYZ colorspace, and
          is used when processing raw buffer data.

          This matrix is expressed as a 3x3 matrix in row-major-order, and contains
          a color transform matrix that maps white balanced colors from the
          reference sensor color space to the CIE XYZ color space with a D50 white
          point.

          Under the first reference illuminant (android.sensor.referenceIlluminant1)
          this matrix is chosen so that the standard white point for this reference
          illuminant in the reference sensor colorspace is mapped to D50 in the
          CIE XYZ colorspace.
          </details>
          <tag id="RAW" />
        </entry>
        <entry name="forwardMatrix2" type="rational"
        visibility="public" optional="true"
        type_notes="3x3 matrix in row-major-order" container="array"
        typedef="colorSpaceTransform">
          <array>
            <size>3</size>
            <size>3</size>
          </array>
          <description>
          A matrix that transforms white balanced camera colors from the reference
          sensor colorspace to the CIE XYZ colorspace with a D50 whitepoint.
          </description>
          <details>
          This matrix is used to convert to the standard CIE XYZ colorspace, and
          is used when processing raw buffer data.

          This matrix is expressed as a 3x3 matrix in row-major-order, and contains
          a color transform matrix that maps white balanced colors from the
          reference sensor color space to the CIE XYZ color space with a D50 white
          point.

          Under the second reference illuminant (android.sensor.referenceIlluminant2)
          this matrix is chosen so that the standard white point for this reference
          illuminant in the reference sensor colorspace is mapped to D50 in the
          CIE XYZ colorspace.

          This matrix will only be present if the second reference
          illuminant is present.
          </details>
          <tag id="RAW" />
        </entry>
        <entry name="baseGainFactor" type="rational"
        optional="true">
          <description>Gain factor from electrons to raw units when
          ISO=100</description>
          <tag id="FUTURE" />
        </entry>
        <entry name="blackLevelPattern" type="int32" visibility="public"
        optional="true" type_notes="2x2 raw count block" container="array"
        typedef="blackLevelPattern">
          <array>
            <size>4</size>
          </array>
          <description>
          A fixed black level offset for each of the color filter arrangement
          (CFA) mosaic channels.
          </description>
          <range>&amp;gt;= 0 for each.</range>
          <details>
          This key specifies the zero light value for each of the CFA mosaic
          channels in the camera sensor.  The maximal value output by the
          sensor is represented by the value in android.sensor.info.whiteLevel.

          The values are given in the same order as channels listed for the CFA
          layout key (see android.sensor.info.colorFilterArrangement), i.e. the
          nth value given corresponds to the black level offset for the nth
          color channel listed in the CFA.

          The black level values of captured images may vary for different
          capture settings (e.g., android.sensor.sensitivity). This key
          represents a coarse approximation for such case. It is recommended to
          use android.sensor.dynamicBlackLevel or use pixels from
          android.sensor.opticalBlackRegions directly for captures when
          supported by the camera device, which provides more accurate black
          level values. For raw capture in particular, it is recommended to use
          pixels from android.sensor.opticalBlackRegions to calculate black
          level values for each frame.
          </details>
          <hal_details>
          The values are given in row-column scan order, with the first value
          corresponding to the element of the CFA in row=0, column=0.
          </hal_details>
          <tag id="RAW" />
        </entry>
        <entry name="maxAnalogSensitivity" type="int32" visibility="public"
               optional="true" hwlevel="full">
          <description>Maximum sensitivity that is implemented
          purely through analog gain.</description>
          <details>For android.sensor.sensitivity values less than or
          equal to this, all applied gain must be analog. For
          values above this, the gain applied can be a mix of analog and
          digital.</details>
          <tag id="V1" />
          <tag id="FULL" />
        </entry>
        <entry name="orientation" type="int32" visibility="public"
               hwlevel="legacy">
          <description>Clockwise angle through which the output image needs to be rotated to be
          upright on the device screen in its native orientation.
          </description>
          <units>Degrees of clockwise rotation; always a multiple of
          90</units>
          <range>0, 90, 180, 270</range>
          <details>
          Also defines the direction of rolling shutter readout, which is from top to bottom in
          the sensor's coordinate system.
          </details>
          <tag id="BC" />
        </entry>
        <entry name="profileHueSatMapDimensions" type="int32"
        visibility="system" optional="true"
        type_notes="Number of samples for hue, saturation, and value"
        container="array">
          <array>
            <size>3</size>
          </array>
          <description>
          The number of input samples for each dimension of
          android.sensor.profileHueSatMap.
          </description>
          <range>
          Hue &amp;gt;= 1,
          Saturation &amp;gt;= 2,
          Value &amp;gt;= 1
          </range>
          <details>
          The number of input samples for the hue, saturation, and value
          dimension of android.sensor.profileHueSatMap. The order of the
          dimensions given is hue, saturation, value; where hue is the 0th
          element.
          </details>
          <tag id="RAW" />
        </entry>
      </static>
      <dynamic>
        <clone entry="android.sensor.exposureTime" kind="controls">
        </clone>
        <clone entry="android.sensor.frameDuration"
        kind="controls"></clone>
        <clone entry="android.sensor.sensitivity" kind="controls">
        </clone>
        <entry name="timestamp" type="int64" visibility="public"
               hwlevel="legacy">
          <description>Time at start of exposure of first
          row of the image sensor active array, in nanoseconds.</description>
          <units>Nanoseconds</units>
          <range>&amp;gt; 0</range>
          <details>The timestamps are also included in all image
          buffers produced for the same capture, and will be identical
          on all the outputs.

          When android.sensor.info.timestampSource `==` UNKNOWN,
          the timestamps measure time since an unspecified starting point,
          and are monotonically increasing. They can be compared with the
          timestamps for other captures from the same camera device, but are
          not guaranteed to be comparable to any other time source.

          When android.sensor.info.timestampSource `==` REALTIME, the
          timestamps measure time in the same timebase as {@link
          android.os.SystemClock#elapsedRealtimeNanos}, and they can
          be compared to other timestamps from other subsystems that
          are using that base.

          For reprocessing, the timestamp will match the start of exposure of
          the input image, i.e. {@link CaptureResult#SENSOR_TIMESTAMP the
          timestamp} in the TotalCaptureResult that was used to create the
          reprocess capture request.
          </details>
          <hal_details>
          All timestamps must be in reference to the kernel's
          CLOCK_BOOTTIME monotonic clock, which properly accounts for
          time spent asleep. This allows for synchronization with
          sensors that continue to operate while the system is
          otherwise asleep.

          If android.sensor.info.timestampSource `==` REALTIME,
          The timestamp must be synchronized with the timestamps from other
          sensor subsystems that are using the same timebase.

          For reprocessing, the input image's start of exposure can be looked up
          with android.sensor.timestamp from the metadata included in the
          capture request.
          </hal_details>
          <tag id="BC" />
        </entry>
        <entry name="temperature" type="float"
        optional="true">
          <description>The temperature of the sensor, sampled at the time
          exposure began for this frame.

          The thermal diode being queried should be inside the sensor PCB, or
          somewhere close to it.
          </description>

          <units>Celsius</units>
          <range>Optional. This value is missing if no temperature is available.</range>
          <tag id="FUTURE" />
        </entry>
        <entry name="neutralColorPoint" type="rational" visibility="public"
        optional="true" container="array">
          <array>
            <size>3</size>
          </array>
          <description>
          The estimated camera neutral color in the native sensor colorspace at
          the time of capture.
          </description>
          <details>
          This value gives the neutral color point encoded as an RGB value in the
          native sensor color space.  The neutral color point indicates the
          currently estimated white point of the scene illumination.  It can be
          used to interpolate between the provided color transforms when
          processing raw sensor data.

          The order of the values is R, G, B; where R is in the lowest index.
          </details>
          <tag id="RAW" />
        </entry>
        <entry name="noiseProfile" type="double" visibility="public"
        optional="true" type_notes="Pairs of noise model coefficients"
        container="array" typedef="pairDoubleDouble">
          <array>
            <size>2</size>
            <size>CFA Channels</size>
          </array>
          <description>
          Noise model coefficients for each CFA mosaic channel.
          </description>
          <details>
          This key contains two noise model coefficients for each CFA channel
          corresponding to the sensor amplification (S) and sensor readout
          noise (O).  These are given as pairs of coefficients for each channel
          in the same order as channels listed for the CFA layout key
          (see android.sensor.info.colorFilterArrangement).  This is
          represented as an array of Pair&amp;lt;Double, Double&amp;gt;, where
          the first member of the Pair at index n is the S coefficient and the
          second member is the O coefficient for the nth color channel in the CFA.

          These coefficients are used in a two parameter noise model to describe
          the amount of noise present in the image for each CFA channel.  The
          noise model used here is:

          N(x) = sqrt(Sx + O)

          Where x represents the recorded signal of a CFA channel normalized to
          the range [0, 1], and S and O are the noise model coeffiecients for
          that channel.

          A more detailed description of the noise model can be found in the
          Adobe DNG specification for the NoiseProfile tag.
          </details>
          <hal_details>
          For a CFA layout of RGGB, the list of coefficients would be given as
          an array of doubles S0,O0,S1,O1,..., where S0 and O0 are the coefficients
          for the red channel, S1 and O1 are the coefficients for the first green
          channel, etc.
          </hal_details>
          <tag id="RAW" />
        </entry>
        <entry name="profileHueSatMap" type="float"
        visibility="system" optional="true"
        type_notes="Mapping for hue, saturation, and value"
        container="array">
          <array>
            <size>hue_samples</size>
            <size>saturation_samples</size>
            <size>value_samples</size>
            <size>3</size>
          </array>
          <description>
          A mapping containing a hue shift, saturation scale, and value scale
          for each pixel.
          </description>
          <units>
          The hue shift is given in degrees; saturation and value scale factors are
          unitless and are between 0 and 1 inclusive
          </units>
          <details>
          hue_samples, saturation_samples, and value_samples are given in
          android.sensor.profileHueSatMapDimensions.

          Each entry of this map contains three floats corresponding to the
          hue shift, saturation scale, and value scale, respectively; where the
          hue shift has the lowest index. The map entries are stored in the key
          in nested loop order, with the value divisions in the outer loop, the
          hue divisions in the middle loop, and the saturation divisions in the
          inner loop. All zero input saturation entries are required to have a
          value scale factor of 1.0.
          </details>
          <tag id="RAW" />
        </entry>
        <entry name="profileToneCurve" type="float"
        visibility="system" optional="true"
        type_notes="Samples defining a spline for a tone-mapping curve"
        container="array">
          <array>
            <size>samples</size>
            <size>2</size>
          </array>
          <description>
          A list of x,y samples defining a tone-mapping curve for gamma adjustment.
          </description>
          <range>
          Each sample has an input range of `[0, 1]` and an output range of
          `[0, 1]`.  The first sample is required to be `(0, 0)`, and the last
          sample is required to be `(1, 1)`.
          </range>
          <details>
          This key contains a default tone curve that can be applied while
          processing the image as a starting point for user adjustments.
          The curve is specified as a list of value pairs in linear gamma.
          The curve is interpolated using a cubic spline.
          </details>
          <tag id="RAW" />
        </entry>
        <entry name="greenSplit" type="float" visibility="public" optional="true">
          <description>
          The worst-case divergence between Bayer green channels.
          </description>
          <range>
          &amp;gt;= 0
          </range>
          <details>
          This value is an estimate of the worst case split between the
          Bayer green channels in the red and blue rows in the sensor color
          filter array.

          The green split is calculated as follows:

          1. A 5x5 pixel (or larger) window W within the active sensor array is
          chosen. The term 'pixel' here is taken to mean a group of 4 Bayer
          mosaic channels (R, Gr, Gb, B).  The location and size of the window
          chosen is implementation defined, and should be chosen to provide a
          green split estimate that is both representative of the entire image
          for this camera sensor, and can be calculated quickly.
          1. The arithmetic mean of the green channels from the red
          rows (mean_Gr) within W is computed.
          1. The arithmetic mean of the green channels from the blue
          rows (mean_Gb) within W is computed.
          1. The maximum ratio R of the two means is computed as follows:
          `R = max((mean_Gr + 1)/(mean_Gb + 1), (mean_Gb + 1)/(mean_Gr + 1))`

          The ratio R is the green split divergence reported for this property,
          which represents how much the green channels differ in the mosaic
          pattern.  This value is typically used to determine the treatment of
          the green mosaic channels when demosaicing.

          The green split value can be roughly interpreted as follows:

          * R &amp;lt; 1.03 is a negligible split (&amp;lt;3% divergence).
          * 1.20 &amp;lt;= R &amp;gt;= 1.03 will require some software
          correction to avoid demosaic errors (3-20% divergence).
          * R &amp;gt; 1.20 will require strong software correction to produce
          a usuable image (&amp;gt;20% divergence).
          </details>
          <hal_details>
          The green split given may be a static value based on prior
          characterization of the camera sensor using the green split
          calculation method given here over a large, representative, sample
          set of images.  Other methods of calculation that produce equivalent
          results, and can be interpreted in the same manner, may be used.
          </hal_details>
          <tag id="RAW" />
        </entry>
      </dynamic>
      <controls>
        <entry name="testPatternData" type="int32" visibility="public" optional="true" container="array">
          <array>
            <size>4</size>
          </array>
          <description>
            A pixel `[R, G_even, G_odd, B]` that supplies the test pattern
            when android.sensor.testPatternMode is SOLID_COLOR.
          </description>
          <details>
          Each color channel is treated as an unsigned 32-bit integer.
          The camera device then uses the most significant X bits
          that correspond to how many bits are in its Bayer raw sensor
          output.

          For example, a sensor with RAW10 Bayer output would use the
          10 most significant bits from each color channel.
          </details>
          <hal_details>
          </hal_details>
        </entry>
        <entry name="testPatternMode" type="int32" visibility="public" optional="true"
          enum="true">
          <enum>
            <value>OFF
              <notes>No test pattern mode is used, and the camera
              device returns captures from the image sensor.

              This is the default if the key is not set.</notes>
            </value>
            <value>SOLID_COLOR
              <notes>
              Each pixel in `[R, G_even, G_odd, B]` is replaced by its
              respective color channel provided in
              android.sensor.testPatternData.

              For example:

                  android.testPatternData = [0, 0xFFFFFFFF, 0xFFFFFFFF, 0]

              All green pixels are 100% green. All red/blue pixels are black.

                  android.testPatternData = [0xFFFFFFFF, 0, 0xFFFFFFFF, 0]

              All red pixels are 100% red. Only the odd green pixels
              are 100% green. All blue pixels are 100% black.
              </notes>
            </value>
            <value>COLOR_BARS
              <notes>
              All pixel data is replaced with an 8-bar color pattern.

              The vertical bars (left-to-right) are as follows:

              * 100% white
              * yellow
              * cyan
              * green
              * magenta
              * red
              * blue
              * black

              In general the image would look like the following:

                 W Y C G M R B K
                 W Y C G M R B K
                 W Y C G M R B K
                 W Y C G M R B K
                 W Y C G M R B K
                 . . . . . . . .
                 . . . . . . . .
                 . . . . . . . .

                 (B = Blue, K = Black)

             Each bar should take up 1/8 of the sensor pixel array width.
             When this is not possible, the bar size should be rounded
             down to the nearest integer and the pattern can repeat
             on the right side.

             Each bar's height must always take up the full sensor
             pixel array height.

             Each pixel in this test pattern must be set to either
             0% intensity or 100% intensity.
             </notes>
            </value>
            <value>COLOR_BARS_FADE_TO_GRAY
              <notes>
              The test pattern is similar to COLOR_BARS, except that
              each bar should start at its specified color at the top,
              and fade to gray at the bottom.

              Furthermore each bar is further subdivided into a left and
              right half. The left half should have a smooth gradient,
              and the right half should have a quantized gradient.

              In particular, the right half's should consist of blocks of the
              same color for 1/16th active sensor pixel array width.

              The least significant bits in the quantized gradient should
              be copied from the most significant bits of the smooth gradient.

              The height of each bar should always be a multiple of 128.
              When this is not the case, the pattern should repeat at the bottom
              of the image.
              </notes>
            </value>
            <value>PN9
              <notes>
              All pixel data is replaced by a pseudo-random sequence
              generated from a PN9 512-bit sequence (typically implemented
              in hardware with a linear feedback shift register).

              The generator should be reset at the beginning of each frame,
              and thus each subsequent raw frame with this test pattern should
              be exactly the same as the last.
              </notes>
            </value>
            <value id="256">CUSTOM1
              <notes>The first custom test pattern. All custom patterns that are
              available only on this camera device are at least this numeric
              value.

              All of the custom test patterns will be static
              (that is the raw image must not vary from frame to frame).
              </notes>
            </value>
          </enum>
          <description>When enabled, the sensor sends a test pattern instead of
          doing a real exposure from the camera.
          </description>
          <range>android.sensor.availableTestPatternModes</range>
          <details>
          When a test pattern is enabled, all manual sensor controls specified
          by android.sensor.* will be ignored. All other controls should
          work as normal.

          For example, if manual flash is enabled, flash firing should still
          occur (and that the test pattern remain unmodified, since the flash
          would not actually affect it).

          Defaults to OFF.
          </details>
          <hal_details>
          All test patterns are specified in the Bayer domain.

          The HAL may choose to substitute test patterns from the sensor
          with test patterns from on-device memory. In that case, it should be
          indistinguishable to the ISP whether the data came from the
          sensor interconnect bus (such as CSI2) or memory.
          </hal_details>
        </entry>
      </controls>
      <dynamic>
        <clone entry="android.sensor.testPatternData" kind="controls">
        </clone>
        <clone entry="android.sensor.testPatternMode" kind="controls">
        </clone>
      </dynamic>
      <static>
        <entry name="availableTestPatternModes" type="int32" visibility="public" optional="true"
          type_notes="list of enums" container="array">
          <array>
            <size>n</size>
          </array>
          <description>List of sensor test pattern modes for android.sensor.testPatternMode
          supported by this camera device.
          </description>
          <range>Any value listed in android.sensor.testPatternMode</range>
          <details>
            Defaults to OFF, and always includes OFF if defined.
          </details>
          <hal_details>
            All custom modes must be >= CUSTOM1.
          </hal_details>
        </entry>
      </static>
      <dynamic>
        <entry name="rollingShutterSkew" type="int64" visibility="public" hwlevel="limited">
          <description>Duration between the start of first row exposure
          and the start of last row exposure.</description>
          <units>Nanoseconds</units>
          <range> &amp;gt;= 0 and &amp;lt;
          {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputMinFrameDuration}.</range>
          <details>
          This is the exposure time skew between the first and last
          row exposure start times. The first row and the last row are
          the first and last rows inside of the
          android.sensor.info.activeArraySize.

          For typical camera sensors that use rolling shutters, this is also equivalent
          to the frame readout time.
          </details>
          <hal_details>
          The HAL must report `0` if the sensor is using global shutter, where all pixels begin
          exposure at the same time.
          </hal_details>
          <tag id="V1" />
        </entry>
      </dynamic>
      <static>
        <entry name="opticalBlackRegions" type="int32" visibility="public" optional="true"
          container="array" typedef="rectangle">
          <array>
            <size>4</size>
            <size>num_regions</size>
          </array>
          <description>List of disjoint rectangles indicating the sensor
          optically shielded black pixel regions.
          </description>
          <details>
            In most camera sensors, the active array is surrounded by some
            optically shielded pixel areas. By blocking light, these pixels
            provides a reliable black reference for black level compensation
            in active array region.

            This key provides a list of disjoint rectangles specifying the
            regions of optically shielded (with metal shield) black pixel
            regions if the camera device is capable of reading out these black
            pixels in the output raw images. In comparison to the fixed black
            level values reported by android.sensor.blackLevelPattern, this key
            may provide a more accurate way for the application to calculate
            black level of each captured raw images.

            When this key is reported, the android.sensor.dynamicBlackLevel and
            android.sensor.dynamicWhiteLevel will also be reported.
          </details>
          <ndk_details>
            The data representation is `int[4]`, which maps to `(left, top, width, height)`.
          </ndk_details>
          <hal_details>
            This array contains (xmin, ymin, width, height). The (xmin, ymin)
            must be &amp;gt;= (0,0) and &amp;lt;=
            android.sensor.info.pixelArraySize. The (width, height) must be
            &amp;lt;= android.sensor.info.pixelArraySize. Each region must be
            outside the region reported by
            android.sensor.info.preCorrectionActiveArraySize.

            The HAL must report minimal number of disjoint regions for the
            optically shielded back pixel regions. For example, if a region can
            be covered by one rectangle, the HAL must not split this region into
            multiple rectangles.
          </hal_details>
        </entry>
      </static>
      <dynamic>
        <entry name="dynamicBlackLevel" type="float" visibility="public"
        optional="true" type_notes="2x2 raw count block" container="array">
          <array>
            <size>4</size>
          </array>
          <description>
          A per-frame dynamic black level offset for each of the color filter
          arrangement (CFA) mosaic channels.
          </description>
          <range>&amp;gt;= 0 for each.</range>
          <details>
          Camera sensor black levels may vary dramatically for different
          capture settings (e.g. android.sensor.sensitivity). The fixed black
          level reported by android.sensor.blackLevelPattern may be too
          inaccurate to represent the actual value on a per-frame basis. The
          camera device internal pipeline relies on reliable black level values
          to process the raw images appropriately. To get the best image
          quality, the camera device may choose to estimate the per frame black
          level values either based on optically shielded black regions
          (android.sensor.opticalBlackRegions) or its internal model.

          This key reports the camera device estimated per-frame zero light
          value for each of the CFA mosaic channels in the camera sensor. The
          android.sensor.blackLevelPattern may only represent a coarse
          approximation of the actual black level values. This value is the
          black level used in camera device internal image processing pipeline
          and generally more accurate than the fixed black level values.
          However, since they are estimated values by the camera device, they
          may not be as accurate as the black level values calculated from the
          optical black pixels reported by android.sensor.opticalBlackRegions.

          The values are given in the same order as channels listed for the CFA
          layout key (see android.sensor.info.colorFilterArrangement), i.e. the
          nth value given corresponds to the black level offset for the nth
          color channel listed in the CFA.

          This key will be available if android.sensor.opticalBlackRegions is available or the
          camera device advertises this key via {@link
          android.hardware.camera2.CameraCharacteristics#getAvailableCaptureResultKeys|ACAMERA_REQUEST_AVAILABLE_RESULT_KEYS}.
          </details>
          <hal_details>
          The values are given in row-column scan order, with the first value
          corresponding to the element of the CFA in row=0, column=0.
          </hal_details>
          <tag id="RAW" />
        </entry>
        <entry name="dynamicWhiteLevel" type="int32" visibility="public"
        optional="true" >
          <description>
          Maximum raw value output by sensor for this frame.
          </description>
          <range> &amp;gt;= 0</range>
          <details>
          Since the android.sensor.blackLevelPattern may change for different
          capture settings (e.g., android.sensor.sensitivity), the white
          level will change accordingly. This key is similar to
          android.sensor.info.whiteLevel, but specifies the camera device
          estimated white level for each frame.

          This key will be available if android.sensor.opticalBlackRegions is
          available or the camera device advertises this key via
          {@link android.hardware.camera2.CameraCharacteristics#getAvailableCaptureRequestKeys|ACAMERA_REQUEST_AVAILABLE_RESULT_KEYS}.
          </details>
          <hal_details>
          The full bit depth of the sensor must be available in the raw data,
          so the value for linear sensors should not be significantly lower
          than maximum raw value supported, i.e. 2^(sensor bits per pixel).
          </hal_details>
          <tag id="RAW" />
        </entry>
      </dynamic>
      <static>
        <entry name="opaqueRawSize" type="int32" visibility="system" container="array">
          <array>
            <size>n</size>
            <size>3</size>
          </array>
          <description>Size in bytes for all the listed opaque RAW buffer sizes</description>
          <range>Must be large enough to fit the opaque RAW of corresponding size produced by
          the camera</range>
          <details>
          This configurations are listed as `(width, height, size_in_bytes)` tuples.
          This is used for sizing the gralloc buffers for opaque RAW buffers.
          All RAW_OPAQUE output stream configuration listed in
          android.scaler.availableStreamConfigurations will have a corresponding tuple in
          this key.
          </details>
          <hal_details>
          This key is added in legacy HAL3.4.

          For legacy HAL3.4 or above: devices advertising RAW_OPAQUE format output must list this
          key.  For legacy HAL3.3 or earlier devices: if RAW_OPAQUE ouput is advertised, camera
          framework will derive this key by assuming each pixel takes two bytes and no padding bytes
          between rows.
          </hal_details>
        </entry>
      </static>
    </section>
    <section name="shading">
      <controls>
        <entry name="mode" type="byte" visibility="public" enum="true" hwlevel="full">
          <enum>
            <value>OFF
            <notes>No lens shading correction is applied.</notes></value>
            <value>FAST
            <notes>Apply lens shading corrections, without slowing
            frame rate relative to sensor raw output</notes></value>
            <value>HIGH_QUALITY
            <notes>Apply high-quality lens shading correction, at the
            cost of possibly reduced frame rate.</notes></value>
          </enum>
          <description>Quality of lens shading correction applied
          to the image data.</description>
          <range>android.shading.availableModes</range>
          <details>
          When set to OFF mode, no lens shading correction will be applied by the
          camera device, and an identity lens shading map data will be provided
          if `android.statistics.lensShadingMapMode == ON`. For example, for lens
          shading map with size of `[ 4, 3 ]`,
          the output android.statistics.lensShadingCorrectionMap for this case will be an identity
          map shown below:

              [ 1.0, 1.0, 1.0, 1.0,  1.0, 1.0, 1.0, 1.0,
               1.0, 1.0, 1.0, 1.0,  1.0, 1.0, 1.0, 1.0,
               1.0, 1.0, 1.0, 1.0,  1.0, 1.0, 1.0, 1.0,
               1.0, 1.0, 1.0, 1.0,  1.0, 1.0, 1.0, 1.0,
               1.0, 1.0, 1.0, 1.0,  1.0, 1.0, 1.0, 1.0,
               1.0, 1.0, 1.0, 1.0,  1.0, 1.0, 1.0, 1.0 ]

          When set to other modes, lens shading correction will be applied by the camera
          device. Applications can request lens shading map data by setting
          android.statistics.lensShadingMapMode to ON, and then the camera device will provide lens
          shading map data in android.statistics.lensShadingCorrectionMap; the returned shading map
          data will be the one applied by the camera device for this capture request.

          The shading map data may depend on the auto-exposure (AE) and AWB statistics, therefore
          the reliability of the map data may be affected by the AE and AWB algorithms. When AE and
          AWB are in AUTO modes(android.control.aeMode `!=` OFF and android.control.awbMode `!=`
          OFF), to get best results, it is recommended that the applications wait for the AE and AWB
          to be converged before using the returned shading map data.
          </details>
        </entry>
        <entry name="strength" type="byte">
          <description>Control the amount of shading correction
          applied to the images</description>
          <units>unitless: 1-10; 10 is full shading
          compensation</units>
          <tag id="FUTURE" />
        </entry>
      </controls>
      <dynamic>
        <clone entry="android.shading.mode" kind="controls">
        </clone>
      </dynamic>
      <static>
        <entry name="availableModes" type="byte" visibility="public"
            type_notes="List of enums (android.shading.mode)." container="array"
            typedef="enumList" hwlevel="legacy">
          <array>
            <size>n</size>
          </array>
          <description>
          List of lens shading modes for android.shading.mode that are supported by this camera device.
          </description>
          <range>Any value listed in android.shading.mode</range>
          <details>
              This list contains lens shading modes that can be set for the camera device.
              Camera devices that support the MANUAL_POST_PROCESSING capability will always
              list OFF and FAST mode. This includes all FULL level devices.
              LEGACY devices will always only support FAST mode.
          </details>
          <hal_details>
            HAL must support both FAST and HIGH_QUALITY if lens shading correction control is
            available on the camera device, but the underlying implementation can be the same for
            both modes. That is, if the highest quality implementation on the camera device does not
            slow down capture rate, then FAST and HIGH_QUALITY will generate the same output.
          </hal_details>
        </entry>
      </static>
    </section>
    <section name="statistics">
      <controls>
        <entry name="faceDetectMode" type="byte" visibility="public" enum="true"
               hwlevel="legacy">
          <enum>
            <value>OFF
            <notes>Do not include face detection statistics in capture
            results.</notes></value>
            <value optional="true">SIMPLE
            <notes>Return face rectangle and confidence values only.
            </notes></value>
            <value optional="true">FULL
            <notes>Return all face
            metadata.

            In this mode, face rectangles, scores, landmarks, and face IDs are all valid.
            </notes></value>
          </enum>
          <description>Operating mode for the face detector
          unit.</description>
          <range>android.statistics.info.availableFaceDetectModes</range>
          <details>Whether face detection is enabled, and whether it
          should output just the basic fields or the full set of
          fields.</details>
          <hal_details>
            SIMPLE mode must fill in android.statistics.faceRectangles and
            android.statistics.faceScores.
            FULL mode must also fill in android.statistics.faceIds, and
            android.statistics.faceLandmarks.
          </hal_details>
          <tag id="BC" />
        </entry>
        <entry name="histogramMode" type="byte" enum="true" typedef="boolean">
          <enum>
            <value>OFF</value>
            <value>ON</value>
          </enum>
          <description>Operating mode for histogram
          generation</description>
          <tag id="FUTURE" />
        </entry>
        <entry name="sharpnessMapMode" type="byte" enum="true" typedef="boolean">
          <enum>
            <value>OFF</value>
            <value>ON</value>
          </enum>
          <description>Operating mode for sharpness map
          generation</description>
          <tag id="FUTURE" />
        </entry>
        <entry name="hotPixelMapMode" type="byte" visibility="public" enum="true"
        typedef="boolean">
          <enum>
            <value>OFF
            <notes>Hot pixel map production is disabled.
            </notes></value>
            <value>ON
            <notes>Hot pixel map production is enabled.
            </notes></value>
          </enum>
          <description>
          Operating mode for hot pixel map generation.
          </description>
          <range>android.statistics.info.availableHotPixelMapModes</range>
          <details>
          If set to `true`, a hot pixel map is returned in android.statistics.hotPixelMap.
          If set to `false`, no hot pixel map will be returned.
          </details>
          <tag id="V1" />
          <tag id="RAW" />
        </entry>
      </controls>
      <static>
        <namespace name="info">
          <entry name="availableFaceDetectModes" type="byte"
                 visibility="public"
                 type_notes="List of enums from android.statistics.faceDetectMode"
                 container="array"
                 typedef="enumList"
                 hwlevel="legacy">
            <array>
              <size>n</size>
            </array>
            <description>List of face detection modes for android.statistics.faceDetectMode that are
            supported by this camera device.
            </description>
            <range>Any value listed in android.statistics.faceDetectMode</range>
            <details>OFF is always supported.
            </details>
          </entry>
          <entry name="histogramBucketCount" type="int32">
            <description>Number of histogram buckets
            supported</description>
            <range>&amp;gt;= 64</range>
            <tag id="FUTURE" />
          </entry>
          <entry name="maxFaceCount" type="int32" visibility="public" hwlevel="legacy">
            <description>The maximum number of simultaneously detectable
            faces.</description>
            <range>0 for cameras without available face detection; otherwise:
            `&gt;=4` for LIMITED or FULL hwlevel devices or
            `&gt;0` for LEGACY devices.</range>
            <tag id="BC" />
          </entry>
          <entry name="maxHistogramCount" type="int32">
            <description>Maximum value possible for a histogram
            bucket</description>
            <tag id="FUTURE" />
          </entry>
          <entry name="maxSharpnessMapValue" type="int32">
            <description>Maximum value possible for a sharpness map
            region.</description>
            <tag id="FUTURE" />
          </entry>
          <entry name="sharpnessMapSize" type="int32"
          type_notes="width x height" container="array" typedef="size">
            <array>
              <size>2</size>
            </array>
            <description>Dimensions of the sharpness
            map</description>
            <range>Must be at least 32 x 32</range>
            <tag id="FUTURE" />
          </entry>
          <entry name="availableHotPixelMapModes" type="byte" visibility="public"
                 type_notes="list of enums" container="array" typedef="boolean">
            <array>
              <size>n</size>
            </array>
            <description>
            List of hot pixel map output modes for android.statistics.hotPixelMapMode that are
            supported by this camera device.
            </description>
            <range>Any value listed in android.statistics.hotPixelMapMode</range>
            <details>
            If no hotpixel map output is available for this camera device, this will contain only
            `false`.

            ON is always supported on devices with the RAW capability.
            </details>
            <tag id="V1" />
            <tag id="RAW" />
          </entry>
          <entry name="availableLensShadingMapModes" type="byte" visibility="public"
                 type_notes="list of enums" container="array" typedef="enumList">
            <array>
              <size>n</size>
            </array>
            <description>
            List of lens shading map output modes for android.statistics.lensShadingMapMode that
            are supported by this camera device.
            </description>
            <range>Any value listed in android.statistics.lensShadingMapMode</range>
            <details>
            If no lens shading map output is available for this camera device, this key will
            contain only OFF.

            ON is always supported on devices with the RAW capability.
            LEGACY mode devices will always only support OFF.
            </details>
          </entry>
          <entry name="availableOisDataModes" type="byte" visibility="public"
                 type_notes="list of enums" container="array" typedef="enumList" hal_version="3.3">
            <array>
              <size>n</size>
            </array>
            <description>
            List of OIS data output modes for android.statistics.oisDataMode that
            are supported by this camera device.
            </description>
            <range>Any value listed in android.statistics.oisDataMode</range>
            <details>
            If no OIS data output is available for this camera device, this key will
            contain only OFF.
            </details>
          </entry>
        </namespace>
      </static>
      <dynamic>
        <clone entry="android.statistics.faceDetectMode"
               kind="controls"></clone>
        <entry name="faceIds" type="int32" visibility="ndk_public"
               container="array" hwlevel="legacy">
          <array>
            <size>n</size>
          </array>
          <description>List of unique IDs for detected faces.</description>
          <details>
          Each detected face is given a unique ID that is valid for as long as the face is visible
          to the camera device.  A face that leaves the field of view and later returns may be
          assigned a new ID.

          Only available if android.statistics.faceDetectMode == FULL</details>
          <tag id="BC" />
        </entry>
        <entry name="faceLandmarks" type="int32" visibility="ndk_public"
               type_notes="(leftEyeX, leftEyeY, rightEyeX, rightEyeY, mouthX, mouthY)"
               container="array" hwlevel="legacy">
          <array>
            <size>n</size>
            <size>6</size>
          </array>
          <description>List of landmarks for detected
          faces.</description>
          <details>
            The coordinate system is that of android.sensor.info.activeArraySize, with
            `(0, 0)` being the top-left pixel of the active array.

            Only available if android.statistics.faceDetectMode == FULL</details>
          <tag id="BC" />
        </entry>
        <entry name="faceRectangles" type="int32" visibility="ndk_public"
               type_notes="(xmin, ymin, xmax, ymax). (0,0) is top-left of active pixel area"
               container="array" typedef="rectangle" hwlevel="legacy">
          <array>
            <size>n</size>
            <size>4</size>
          </array>
          <description>List of the bounding rectangles for detected
          faces.</description>
          <details>
            The coordinate system is that of android.sensor.info.activeArraySize, with
            `(0, 0)` being the top-left pixel of the active array.

            Only available if android.statistics.faceDetectMode != OFF</details>
          <ndk_details>
            The data representation is `int[4]`, which maps to `(left, top, width, height)`.
          </ndk_details>
          <tag id="BC" />
        </entry>
        <entry name="faceScores" type="byte" visibility="ndk_public"
               container="array" hwlevel="legacy">
          <array>
            <size>n</size>
          </array>
          <description>List of the face confidence scores for
          detected faces</description>
          <range>1-100</range>
          <details>Only available if android.statistics.faceDetectMode != OFF.
          </details>
          <hal_details>
          The value should be meaningful (for example, setting 100 at
          all times is illegal).</hal_details>
          <tag id="BC" />
        </entry>
        <entry name="faces" type="int32" visibility="java_public" synthetic="true"
               container="array" typedef="face" hwlevel="legacy">
          <array>
            <size>n</size>
          </array>
          <description>List of the faces detected through camera face detection
          in this capture.</description>
          <details>
          Only available if android.statistics.faceDetectMode `!=` OFF.
          </details>
        </entry>
        <entry name="histogram" type="int32"
        type_notes="count of pixels for each color channel that fall into each histogram bucket, scaled to be between 0 and maxHistogramCount"
        container="array">
          <array>
            <size>n</size>
            <size>3</size>
          </array>
          <description>A 3-channel histogram based on the raw
          sensor data</description>
          <details>The k'th bucket (0-based) covers the input range
          (with w = android.sensor.info.whiteLevel) of [ k * w/N,
          (k + 1) * w / N ). If only a monochrome sharpness map is
          supported, all channels should have the same data</details>
          <tag id="FUTURE" />
        </entry>
        <clone entry="android.statistics.histogramMode"
        kind="controls"></clone>
        <entry name="sharpnessMap" type="int32"
        type_notes="estimated sharpness for each region of the input image. Normalized to be between 0 and maxSharpnessMapValue. Higher values mean sharper (better focused)"
        container="array">
          <array>
            <size>n</size>
            <size>m</size>
            <size>3</size>
          </array>
          <description>A 3-channel sharpness map, based on the raw
          sensor data</description>
          <details>If only a monochrome sharpness map is supported,
          all channels should have the same data</details>
          <tag id="FUTURE" />
        </entry>
        <clone entry="android.statistics.sharpnessMapMode"
               kind="controls"></clone>
        <entry name="lensShadingCorrectionMap" type="byte" visibility="java_public"
               typedef="lensShadingMap" hwlevel="full">
          <description>The shading map is a low-resolution floating-point map
          that lists the coefficients used to correct for vignetting, for each
          Bayer color channel.</description>
          <range>Each gain factor is &amp;gt;= 1</range>
          <details>
          The map provided here is the same map that is used by the camera device to
          correct both color shading and vignetting for output non-RAW images.

          When there is no lens shading correction applied to RAW
          output images (android.sensor.info.lensShadingApplied `==`
          false), this map is the complete lens shading correction
          map; when there is some lens shading correction applied to
          the RAW output image (android.sensor.info.lensShadingApplied
          `==` true), this map reports the remaining lens shading
          correction map that needs to be applied to get shading
          corrected images that match the camera device's output for
          non-RAW formats.

          For a complete shading correction map, the least shaded
          section of the image will have a gain factor of 1; all
          other sections will have gains above 1.

          When android.colorCorrection.mode = TRANSFORM_MATRIX, the map
          will take into account the colorCorrection settings.

          The shading map is for the entire active pixel array, and is not
          affected by the crop region specified in the request. Each shading map
          entry is the value of the shading compensation map over a specific
          pixel on the sensor.  Specifically, with a (N x M) resolution shading
          map, and an active pixel array size (W x H), shading map entry
          (x,y) ϵ (0 ... N-1, 0 ... M-1) is the value of the shading map at
          pixel ( ((W-1)/(N-1)) * x, ((H-1)/(M-1)) * y) for the four color channels.
          The map is assumed to be bilinearly interpolated between the sample points.

          The channel order is [R, Geven, Godd, B], where Geven is the green
          channel for the even rows of a Bayer pattern, and Godd is the odd rows.
          The shading map is stored in a fully interleaved format.

          The shading map will generally have on the order of 30-40 rows and columns,
          and will be smaller than 64x64.

          As an example, given a very small map defined as:

              width,height = [ 4, 3 ]
              values =
              [ 1.3, 1.2, 1.15, 1.2,  1.2, 1.2, 1.15, 1.2,
                  1.1, 1.2, 1.2, 1.2,  1.3, 1.2, 1.3, 1.3,
                1.2, 1.2, 1.25, 1.1,  1.1, 1.1, 1.1, 1.0,
                  1.0, 1.0, 1.0, 1.0,  1.2, 1.3, 1.25, 1.2,
                1.3, 1.2, 1.2, 1.3,   1.2, 1.15, 1.1, 1.2,
                  1.2, 1.1, 1.0, 1.2,  1.3, 1.15, 1.2, 1.3 ]

          The low-resolution scaling map images for each channel are
          (displayed using nearest-neighbor interpolation):

          ![Red lens shading map](android.statistics.lensShadingMap/red_shading.png)
          ![Green (even rows) lens shading map](android.statistics.lensShadingMap/green_e_shading.png)
          ![Green (odd rows) lens shading map](android.statistics.lensShadingMap/green_o_shading.png)
          ![Blue lens shading map](android.statistics.lensShadingMap/blue_shading.png)

          As a visualization only, inverting the full-color map to recover an
          image of a gray wall (using bicubic interpolation for visual quality) as captured by the sensor gives:

          ![Image of a uniform white wall (inverse shading map)](android.statistics.lensShadingMap/inv_shading.png)
          </details>
        </entry>
        <entry name="lensShadingMap" type="float" visibility="ndk_public"
               type_notes="2D array of float gain factors per channel to correct lens shading"
               container="array" hwlevel="full">
          <array>
            <size>4</size>
            <size>n</size>
            <size>m</size>
          </array>
          <description>The shading map is a low-resolution floating-point map
          that lists the coefficients used to correct for vignetting and color shading,
          for each Bayer color channel of RAW image data.</description>
          <range>Each gain factor is &amp;gt;= 1</range>
          <details>
          The map provided here is the same map that is used by the camera device to
          correct both color shading and vignetting for output non-RAW images.

          When there is no lens shading correction applied to RAW
          output images (android.sensor.info.lensShadingApplied `==`
          false), this map is the complete lens shading correction
          map; when there is some lens shading correction applied to
          the RAW output image (android.sensor.info.lensShadingApplied
          `==` true), this map reports the remaining lens shading
          correction map that needs to be applied to get shading
          corrected images that match the camera device's output for
          non-RAW formats.

          For a complete shading correction map, the least shaded
          section of the image will have a gain factor of 1; all
          other sections will have gains above 1.

          When android.colorCorrection.mode = TRANSFORM_MATRIX, the map
          will take into account the colorCorrection settings.

          The shading map is for the entire active pixel array, and is not
          affected by the crop region specified in the request. Each shading map
          entry is the value of the shading compensation map over a specific
          pixel on the sensor.  Specifically, with a (N x M) resolution shading
          map, and an active pixel array size (W x H), shading map entry
          (x,y) ϵ (0 ... N-1, 0 ... M-1) is the value of the shading map at
          pixel ( ((W-1)/(N-1)) * x, ((H-1)/(M-1)) * y) for the four color channels.
          The map is assumed to be bilinearly interpolated between the sample points.

          The channel order is [R, Geven, Godd, B], where Geven is the green
          channel for the even rows of a Bayer pattern, and Godd is the odd rows.
          The shading map is stored in a fully interleaved format, and its size
          is provided in the camera static metadata by android.lens.info.shadingMapSize.

          The shading map will generally have on the order of 30-40 rows and columns,
          and will be smaller than 64x64.

          As an example, given a very small map defined as:

              android.lens.info.shadingMapSize = [ 4, 3 ]
              android.statistics.lensShadingMap =
              [ 1.3, 1.2, 1.15, 1.2,  1.2, 1.2, 1.15, 1.2,
                  1.1, 1.2, 1.2, 1.2,  1.3, 1.2, 1.3, 1.3,
                1.2, 1.2, 1.25, 1.1,  1.1, 1.1, 1.1, 1.0,
                  1.0, 1.0, 1.0, 1.0,  1.2, 1.3, 1.25, 1.2,
                1.3, 1.2, 1.2, 1.3,   1.2, 1.15, 1.1, 1.2,
                  1.2, 1.1, 1.0, 1.2,  1.3, 1.15, 1.2, 1.3 ]

          The low-resolution scaling map images for each channel are
          (displayed using nearest-neighbor interpolation):

          ![Red lens shading map](android.statistics.lensShadingMap/red_shading.png)
          ![Green (even rows) lens shading map](android.statistics.lensShadingMap/green_e_shading.png)
          ![Green (odd rows) lens shading map](android.statistics.lensShadingMap/green_o_shading.png)
          ![Blue lens shading map](android.statistics.lensShadingMap/blue_shading.png)

          As a visualization only, inverting the full-color map to recover an
          image of a gray wall (using bicubic interpolation for visual quality)
          as captured by the sensor gives:

          ![Image of a uniform white wall (inverse shading map)](android.statistics.lensShadingMap/inv_shading.png)

          Note that the RAW image data might be subject to lens shading
          correction not reported on this map. Query
          android.sensor.info.lensShadingApplied to see if RAW image data has subject
          to lens shading correction. If android.sensor.info.lensShadingApplied
          is TRUE, the RAW image data is subject to partial or full lens shading
          correction. In the case full lens shading correction is applied to RAW
          images, the gain factor map reported in this key will contain all 1.0 gains.
          In other words, the map reported in this key is the remaining lens shading
          that needs to be applied on the RAW image to get images without lens shading
          artifacts. See android.request.maxNumOutputRaw for a list of RAW image
          formats.
          </details>
          <hal_details>
          The lens shading map calculation may depend on exposure and white balance statistics.
          When AE and AWB are in AUTO modes
          (android.control.aeMode `!=` OFF and android.control.awbMode `!=` OFF), the HAL
          may have all the information it need to generate most accurate lens shading map. When
          AE or AWB are in manual mode
          (android.control.aeMode `==` OFF or android.control.awbMode `==` OFF), the shading map
          may be adversely impacted by manual exposure or white balance parameters. To avoid
          generating unreliable shading map data, the HAL may choose to lock the shading map with
          the latest known good map generated when the AE and AWB are in AUTO modes.
          </hal_details>
        </entry>
        <entry name="predictedColorGains" type="float"
               visibility="hidden"
               deprecated="true"
               optional="true"
               type_notes="A 1D array of floats for 4 color channel gains"
               container="array">
          <array>
            <size>4</size>
          </array>
          <description>The best-fit color channel gains calculated
          by the camera device's statistics units for the current output frame.
          </description>
          <deprecation_description>
          Never fully implemented or specified; do not use
          </deprecation_description>
          <details>
          This may be different than the gains used for this frame,
          since statistics processing on data from a new frame
          typically completes after the transform has already been
          applied to that frame.

          The 4 channel gains are defined in Bayer domain,
          see android.colorCorrection.gains for details.

          This value should always be calculated by the auto-white balance (AWB) block,
          regardless of the android.control.* current values.
          </details>
        </entry>
        <entry name="predictedColorTransform" type="rational"
               visibility="hidden"
               deprecated="true"
               optional="true"
               type_notes="3x3 rational matrix in row-major order"
               container="array">
          <array>
            <size>3</size>
            <size>3</size>
          </array>
          <description>The best-fit color transform matrix estimate
          calculated by the camera device's statistics units for the current
          output frame.</description>
          <deprecation_description>
          Never fully implemented or specified; do not use
          </deprecation_description>
          <details>The camera device will provide the estimate from its
          statistics unit on the white balance transforms to use
          for the next frame. These are the values the camera device believes
          are the best fit for the current output frame. This may
          be different than the transform used for this frame, since
          statistics processing on data from a new frame typically
          completes after the transform has already been applied to
          that frame.

          These estimates must be provided for all frames, even if
          capture settings and color transforms are set by the application.

          This value should always be calculated by the auto-white balance (AWB) block,
          regardless of the android.control.* current values.
          </details>
        </entry>
        <entry name="sceneFlicker" type="byte" visibility="public" enum="true"
               hwlevel="full">
          <enum>
            <value>NONE
            <notes>The camera device does not detect any flickering illumination
            in the current scene.</notes></value>
            <value>50HZ
            <notes>The camera device detects illumination flickering at 50Hz
            in the current scene.</notes></value>
            <value>60HZ
            <notes>The camera device detects illumination flickering at 60Hz
            in the current scene.</notes></value>
          </enum>
          <description>The camera device estimated scene illumination lighting
          frequency.</description>
          <details>
          Many light sources, such as most fluorescent lights, flicker at a rate
          that depends on the local utility power standards. This flicker must be
          accounted for by auto-exposure routines to avoid artifacts in captured images.
          The camera device uses this entry to tell the application what the scene
          illuminant frequency is.

          When manual exposure control is enabled
          (`android.control.aeMode == OFF` or `android.control.mode ==
          OFF`), the android.control.aeAntibandingMode doesn't perform
          antibanding, and the application can ensure it selects
          exposure times that do not cause banding issues by looking
          into this metadata field. See
          android.control.aeAntibandingMode for more details.

          Reports NONE if there doesn't appear to be flickering illumination.
          </details>
        </entry>
        <clone entry="android.statistics.hotPixelMapMode" kind="controls">
        </clone>
        <entry name="hotPixelMap" type="int32" visibility="public"
        type_notes="list of coordinates based on android.sensor.pixelArraySize"
        container="array" typedef="point">
          <array>
            <size>2</size>
            <size>n</size>
          </array>
          <description>
          List of `(x, y)` coordinates of hot/defective pixels on the sensor.
          </description>
          <range>
          n &lt;= number of pixels on the sensor.
          The `(x, y)` coordinates must be bounded by
          android.sensor.info.pixelArraySize.
          </range>
          <details>
          A coordinate `(x, y)` must lie between `(0, 0)`, and
          `(width - 1, height - 1)` (inclusive), which are the top-left and
          bottom-right of the pixel array, respectively. The width and
          height dimensions are given in android.sensor.info.pixelArraySize.
          This may include hot pixels that lie outside of the active array
          bounds given by android.sensor.info.activeArraySize.
          </details>
          <hal_details>
          A hotpixel map contains the coordinates of pixels on the camera
          sensor that do report valid values (usually due to defects in
          the camera sensor). This includes pixels that are stuck at certain
          values, or have a response that does not accuractly encode the
          incoming light from the scene.

          To avoid performance issues, there should be significantly fewer hot
          pixels than actual pixels on the camera sensor.
          </hal_details>
          <tag id="V1" />
          <tag id="RAW" />
        </entry>
      </dynamic>
      <controls>
        <entry name="lensShadingMapMode" type="byte" visibility="public" enum="true" hwlevel="full">
          <enum>
            <value>OFF
            <notes>Do not include a lens shading map in the capture result.</notes></value>
            <value>ON
            <notes>Include a lens shading map in the capture result.</notes></value>
          </enum>
          <description>Whether the camera device will output the lens
          shading map in output result metadata.</description>
          <range>android.statistics.info.availableLensShadingMapModes</range>
          <details>When set to ON,
          android.statistics.lensShadingMap will be provided in
          the output result metadata.

          ON is always supported on devices with the RAW capability.
          </details>
          <tag id="RAW" />
        </entry>
      </controls>
      <dynamic>
        <clone entry="android.statistics.lensShadingMapMode" kind="controls">
        </clone>
      </dynamic>
      <controls>
        <entry name="oisDataMode" type="byte" visibility="public" enum="true" hal_version="3.3">
          <enum>
            <value>OFF
            <notes>Do not include OIS data in the capture result.</notes></value>
            <value>ON
            <notes>Include OIS data in the capture result.</notes>
            <sdk_notes>android.statistics.oisSamples provides OIS sample data in the
            output result metadata.
            </sdk_notes>
            <ndk_notes>android.statistics.oisTimestamps, android.statistics.oisXShifts,
            and android.statistics.oisYShifts provide OIS data in the output result metadata.
            </ndk_notes>
            </value>
          </enum>
          <description>A control for selecting whether OIS position information is included in output
          result metadata.</description>
          <range>android.statistics.info.availableOisDataModes</range>
        </entry>
      </controls>
      <dynamic>
        <clone entry="android.statistics.oisDataMode" kind="controls">
        </clone>
        <entry name="oisTimestamps" type="int64" visibility="ndk_public" container="array" hal_version="3.3">
          <array>
            <size>n</size>
          </array>
          <description>
          An array of timestamps of OIS samples, in nanoseconds.
          </description>
          <units>nanoseconds</units>
          <details>
          The array contains the timestamps of OIS samples. The timestamps are in the same
          timebase as and comparable to android.sensor.timestamp.
          </details>
        </entry>
        <entry name="oisXShifts" type="float" visibility="ndk_public" container="array" hal_version="3.3">
          <array>
            <size>n</size>
          </array>
          <description>
          An array of shifts of OIS samples, in x direction.
          </description>
          <units>Pixels in active array.</units>
          <details>
          The array contains the amount of shifts in x direction, in pixels, based on OIS samples.
          A positive value is a shift from left to right in active array coordinate system. For
          example, if the optical center is (1000, 500) in active array coordinates, a shift of
          (3, 0) puts the new optical center at (1003, 500).

          The number of shifts must match the number of timestamps in
          android.statistics.oisTimestamps.
          </details>
        </entry>
        <entry name="oisYShifts" type="float" visibility="ndk_public" container="array" hal_version="3.3">
          <array>
            <size>n</size>
          </array>
          <description>
          An array of shifts of OIS samples, in y direction.
          </description>
          <units>Pixels in active array.</units>
          <details>
          The array contains the amount of shifts in y direction, in pixels, based on OIS samples.
          A positive value is a shift from top to bottom in active array coordinate system. For
          example, if the optical center is (1000, 500) in active array coordinates, a shift of
          (0, 5) puts the new optical center at (1000, 505).

          The number of shifts must match the number of timestamps in
          android.statistics.oisTimestamps.
          </details>
        </entry>
        <entry name="oisSamples" type="float" visibility="java_public" synthetic="true"
               container="array" typedef="oisSample" hal_version="3.3">
          <array>
            <size>n</size>
          </array>
          <description>
          An array of OIS samples.
          </description>
          <details>
          Each OIS sample contains the timestamp and the amount of shifts in x and y direction,
          in pixels, of the OIS sample.

          A positive value for a shift in x direction is a shift from left to right in active array
          coordinate system. For example, if the optical center is (1000, 500) in active array
          coordinates, a shift of (3, 0) puts the new optical center at (1003, 500).

          A positive value for a shift in y direction is a shift from top to bottom in active array
          coordinate system. For example, if the optical center is (1000, 500) in active array
          coordinates, a shift of (0, 5) puts the new optical center at (1000, 505).
          </details>
        </entry>
      </dynamic>
    </section>
    <section name="tonemap">
      <controls>
        <entry name="curveBlue" type="float" visibility="ndk_public"
        type_notes="1D array of float pairs (P_IN, P_OUT). The maximum number of pairs is specified by android.tonemap.maxCurvePoints."
        container="array" hwlevel="full">
          <array>
            <size>n</size>
            <size>2</size>
          </array>
          <description>Tonemapping / contrast / gamma curve for the blue
          channel, to use when android.tonemap.mode is
          CONTRAST_CURVE.</description>
          <details>See android.tonemap.curveRed for more details.</details>
        </entry>
        <entry name="curveGreen" type="float" visibility="ndk_public"
        type_notes="1D array of float pairs (P_IN, P_OUT). The maximum number of pairs is specified by android.tonemap.maxCurvePoints."
        container="array" hwlevel="full">
          <array>
            <size>n</size>
            <size>2</size>
          </array>
          <description>Tonemapping / contrast / gamma curve for the green
          channel, to use when android.tonemap.mode is
          CONTRAST_CURVE.</description>
          <details>See android.tonemap.curveRed for more details.</details>
        </entry>
        <entry name="curveRed" type="float" visibility="ndk_public"
        type_notes="1D array of float pairs (P_IN, P_OUT). The maximum number of pairs is specified by android.tonemap.maxCurvePoints."
        container="array" hwlevel="full">
          <array>
            <size>n</size>
            <size>2</size>
          </array>
          <description>Tonemapping / contrast / gamma curve for the red
          channel, to use when android.tonemap.mode is
          CONTRAST_CURVE.</description>
          <range>0-1 on both input and output coordinates, normalized
          as a floating-point value such that 0 == black and 1 == white.
          </range>
          <details>
          Each channel's curve is defined by an array of control points:

              android.tonemap.curveRed =
                [ P0in, P0out, P1in, P1out, P2in, P2out, P3in, P3out, ..., PNin, PNout ]
              2 &lt;= N &lt;= android.tonemap.maxCurvePoints

          These are sorted in order of increasing `Pin`; it is
          required that input values 0.0 and 1.0 are included in the list to
          define a complete mapping. For input values between control points,
          the camera device must linearly interpolate between the control
          points.

          Each curve can have an independent number of points, and the number
          of points can be less than max (that is, the request doesn't have to
          always provide a curve with number of points equivalent to
          android.tonemap.maxCurvePoints).

          For devices with MONOCHROME capability, only red channel is used. Green and blue channels
          are ignored.

          A few examples, and their corresponding graphical mappings; these
          only specify the red channel and the precision is limited to 4
          digits, for conciseness.

          Linear mapping:

              android.tonemap.curveRed = [ 0, 0, 1.0, 1.0 ]

          ![Linear mapping curve](android.tonemap.curveRed/linear_tonemap.png)

          Invert mapping:

              android.tonemap.curveRed = [ 0, 1.0, 1.0, 0 ]

          ![Inverting mapping curve](android.tonemap.curveRed/inverse_tonemap.png)

          Gamma 1/2.2 mapping, with 16 control points:

              android.tonemap.curveRed = [
                0.0000, 0.0000, 0.0667, 0.2920, 0.1333, 0.4002, 0.2000, 0.4812,
                0.2667, 0.5484, 0.3333, 0.6069, 0.4000, 0.6594, 0.4667, 0.7072,
                0.5333, 0.7515, 0.6000, 0.7928, 0.6667, 0.8317, 0.7333, 0.8685,
                0.8000, 0.9035, 0.8667, 0.9370, 0.9333, 0.9691, 1.0000, 1.0000 ]

          ![Gamma = 1/2.2 tonemapping curve](android.tonemap.curveRed/gamma_tonemap.png)

          Standard sRGB gamma mapping, per IEC 61966-2-1:1999, with 16 control points:

              android.tonemap.curveRed = [
                0.0000, 0.0000, 0.0667, 0.2864, 0.1333, 0.4007, 0.2000, 0.4845,
                0.2667, 0.5532, 0.3333, 0.6125, 0.4000, 0.6652, 0.4667, 0.7130,
                0.5333, 0.7569, 0.6000, 0.7977, 0.6667, 0.8360, 0.7333, 0.8721,
                0.8000, 0.9063, 0.8667, 0.9389, 0.9333, 0.9701, 1.0000, 1.0000 ]

          ![sRGB tonemapping curve](android.tonemap.curveRed/srgb_tonemap.png)
        </details>
        <hal_details>
          For good quality of mapping, at least 128 control points are
          preferred.

          A typical use case of this would be a gamma-1/2.2 curve, with as many
          control points used as are available.
        </hal_details>
        </entry>
        <entry name="curve" type="float" visibility="java_public" synthetic="true"
               typedef="tonemapCurve"
               hwlevel="full">
          <description>Tonemapping / contrast / gamma curve to use when android.tonemap.mode
          is CONTRAST_CURVE.</description>
          <details>
          The tonemapCurve consist of three curves for each of red, green, and blue
          channels respectively. The following example uses the red channel as an
          example. The same logic applies to green and blue channel.
          Each channel's curve is defined by an array of control points:

              curveRed =
                [ P0(in, out), P1(in, out), P2(in, out), P3(in, out), ..., PN(in, out) ]
              2 &lt;= N &lt;= android.tonemap.maxCurvePoints

          These are sorted in order of increasing `Pin`; it is always
          guaranteed that input values 0.0 and 1.0 are included in the list to
          define a complete mapping. For input values between control points,
          the camera device must linearly interpolate between the control
          points.

          Each curve can have an independent number of points, and the number
          of points can be less than max (that is, the request doesn't have to
          always provide a curve with number of points equivalent to
          android.tonemap.maxCurvePoints).

          For devices with MONOCHROME capability, only red channel is used. Green and blue channels
          are ignored.

          A few examples, and their corresponding graphical mappings; these
          only specify the red channel and the precision is limited to 4
          digits, for conciseness.

          Linear mapping:

              curveRed = [ (0, 0), (1.0, 1.0) ]

          ![Linear mapping curve](android.tonemap.curveRed/linear_tonemap.png)

          Invert mapping:

              curveRed = [ (0, 1.0), (1.0, 0) ]

          ![Inverting mapping curve](android.tonemap.curveRed/inverse_tonemap.png)

          Gamma 1/2.2 mapping, with 16 control points:

              curveRed = [
                (0.0000, 0.0000), (0.0667, 0.2920), (0.1333, 0.4002), (0.2000, 0.4812),
                (0.2667, 0.5484), (0.3333, 0.6069), (0.4000, 0.6594), (0.4667, 0.7072),
                (0.5333, 0.7515), (0.6000, 0.7928), (0.6667, 0.8317), (0.7333, 0.8685),
                (0.8000, 0.9035), (0.8667, 0.9370), (0.9333, 0.9691), (1.0000, 1.0000) ]

          ![Gamma = 1/2.2 tonemapping curve](android.tonemap.curveRed/gamma_tonemap.png)

          Standard sRGB gamma mapping, per IEC 61966-2-1:1999, with 16 control points:

              curveRed = [
                (0.0000, 0.0000), (0.0667, 0.2864), (0.1333, 0.4007), (0.2000, 0.4845),
                (0.2667, 0.5532), (0.3333, 0.6125), (0.4000, 0.6652), (0.4667, 0.7130),
                (0.5333, 0.7569), (0.6000, 0.7977), (0.6667, 0.8360), (0.7333, 0.8721),
                (0.8000, 0.9063), (0.8667, 0.9389), (0.9333, 0.9701), (1.0000, 1.0000) ]

          ![sRGB tonemapping curve](android.tonemap.curveRed/srgb_tonemap.png)
        </details>
        <hal_details>
            This entry is created by the framework from the curveRed, curveGreen and
            curveBlue entries.
        </hal_details>
        </entry>
        <entry name="mode" type="byte" visibility="public" enum="true"
               hwlevel="full">
          <enum>
            <value>CONTRAST_CURVE
              <notes>Use the tone mapping curve specified in
              the android.tonemap.curve* entries.

              All color enhancement and tonemapping must be disabled, except
              for applying the tonemapping curve specified by
              android.tonemap.curve.

              Must not slow down frame rate relative to raw
              sensor output.
              </notes>
            </value>
            <value>FAST
              <notes>
              Advanced gamma mapping and color enhancement may be applied, without
              reducing frame rate compared to raw sensor output.
              </notes>
            </value>
            <value>HIGH_QUALITY
              <notes>
              High-quality gamma mapping and color enhancement will be applied, at
              the cost of possibly reduced frame rate compared to raw sensor output.
              </notes>
            </value>
            <value>GAMMA_VALUE
              <notes>
              Use the gamma value specified in android.tonemap.gamma to peform
              tonemapping.

              All color enhancement and tonemapping must be disabled, except
              for applying the tonemapping curve specified by android.tonemap.gamma.

              Must not slow down frame rate relative to raw sensor output.
              </notes>
            </value>
            <value>PRESET_CURVE
              <notes>
              Use the preset tonemapping curve specified in
              android.tonemap.presetCurve to peform tonemapping.

              All color enhancement and tonemapping must be disabled, except
              for applying the tonemapping curve specified by
              android.tonemap.presetCurve.

              Must not slow down frame rate relative to raw sensor output.
              </notes>
            </value>
          </enum>
          <description>High-level global contrast/gamma/tonemapping control.
          </description>
          <range>android.tonemap.availableToneMapModes</range>
          <details>
          When switching to an application-defined contrast curve by setting
          android.tonemap.mode to CONTRAST_CURVE, the curve is defined
          per-channel with a set of `(in, out)` points that specify the
          mapping from input high-bit-depth pixel value to the output
          low-bit-depth value.  Since the actual pixel ranges of both input
          and output may change depending on the camera pipeline, the values
          are specified by normalized floating-point numbers.

          More-complex color mapping operations such as 3D color look-up
          tables, selective chroma enhancement, or other non-linear color
          transforms will be disabled when android.tonemap.mode is
          CONTRAST_CURVE.

          When using either FAST or HIGH_QUALITY, the camera device will
          emit its own tonemap curve in android.tonemap.curve.
          These values are always available, and as close as possible to the
          actually used nonlinear/nonglobal transforms.

          If a request is sent with CONTRAST_CURVE with the camera device's
          provided curve in FAST or HIGH_QUALITY, the image's tonemap will be
          roughly the same.</details>
        </entry>
      </controls>
      <static>
        <entry name="maxCurvePoints" type="int32" visibility="public"
               hwlevel="full">
          <description>Maximum number of supported points in the
            tonemap curve that can be used for android.tonemap.curve.
          </description>
          <details>
          If the actual number of points provided by the application (in android.tonemap.curve*) is
          less than this maximum, the camera device will resample the curve to its internal
          representation, using linear interpolation.

          The output curves in the result metadata may have a different number
          of points than the input curves, and will represent the actual
          hardware curves used as closely as possible when linearly interpolated.
          </details>
          <hal_details>
          This value must be at least 64. This should be at least 128.
          </hal_details>
        </entry>
        <entry name="availableToneMapModes" type="byte" visibility="public"
        type_notes="list of enums" container="array" typedef="enumList" hwlevel="full">
          <array>
            <size>n</size>
          </array>
          <description>
          List of tonemapping modes for android.tonemap.mode that are supported by this camera
          device.
          </description>
          <range>Any value listed in android.tonemap.mode</range>
          <details>
          Camera devices that support the MANUAL_POST_PROCESSING capability will always contain
          at least one of below mode combinations:

          * CONTRAST_CURVE, FAST and HIGH_QUALITY
          * GAMMA_VALUE, PRESET_CURVE, FAST and HIGH_QUALITY

          This includes all FULL level devices.
          </details>
          <hal_details>
            HAL must support both FAST and HIGH_QUALITY if automatic tonemap control is available
            on the camera device, but the underlying implementation can be the same for both modes.
            That is, if the highest quality implementation on the camera device does not slow down
            capture rate, then FAST and HIGH_QUALITY will generate the same output.
          </hal_details>
        </entry>
      </static>
      <dynamic>
        <clone entry="android.tonemap.curveBlue" kind="controls">
        </clone>
        <clone entry="android.tonemap.curveGreen" kind="controls">
        </clone>
        <clone entry="android.tonemap.curveRed" kind="controls">
        </clone>
        <clone entry="android.tonemap.curve" kind="controls">
        </clone>
        <clone entry="android.tonemap.mode" kind="controls">
        </clone>
      </dynamic>
      <controls>
        <entry name="gamma" type="float" visibility="public">
          <description> Tonemapping curve to use when android.tonemap.mode is
          GAMMA_VALUE
          </description>
          <details>
          The tonemap curve will be defined the following formula:
          * OUT = pow(IN, 1.0 / gamma)
          where IN and OUT is the input pixel value scaled to range [0.0, 1.0],
          pow is the power function and gamma is the gamma value specified by this
          key.

          The same curve will be applied to all color channels. The camera device
          may clip the input gamma value to its supported range. The actual applied
          value will be returned in capture result.

          The valid range of gamma value varies on different devices, but values
          within [1.0, 5.0] are guaranteed not to be clipped.
          </details>
        </entry>
        <entry name="presetCurve" type="byte" visibility="public" enum="true">
          <enum>
            <value>SRGB
              <notes>Tonemapping curve is defined by sRGB</notes>
            </value>
            <value>REC709
              <notes>Tonemapping curve is defined by ITU-R BT.709</notes>
            </value>
          </enum>
          <description> Tonemapping curve to use when android.tonemap.mode is
          PRESET_CURVE
          </description>
          <details>
          The tonemap curve will be defined by specified standard.

          sRGB (approximated by 16 control points):

          ![sRGB tonemapping curve](android.tonemap.curveRed/srgb_tonemap.png)

          Rec. 709 (approximated by 16 control points):

          ![Rec. 709 tonemapping curve](android.tonemap.curveRed/rec709_tonemap.png)

          Note that above figures show a 16 control points approximation of preset
          curves. Camera devices may apply a different approximation to the curve.
          </details>
        </entry>
      </controls>
      <dynamic>
        <clone entry="android.tonemap.gamma" kind="controls">
        </clone>
        <clone entry="android.tonemap.presetCurve" kind="controls">
        </clone>
      </dynamic>
    </section>
    <section name="led">
      <controls>
        <entry name="transmit" type="byte" visibility="hidden" optional="true"
               enum="true" typedef="boolean">
          <enum>
            <value>OFF</value>
            <value>ON</value>
          </enum>
          <description>This LED is nominally used to indicate to the user
          that the camera is powered on and may be streaming images back to the
          Application Processor. In certain rare circumstances, the OS may
          disable this when video is processed locally and not transmitted to
          any untrusted applications.

          In particular, the LED *must* always be on when the data could be
          transmitted off the device. The LED *should* always be on whenever
          data is stored locally on the device.

          The LED *may* be off if a trusted application is using the data that
          doesn't violate the above rules.
          </description>
        </entry>
      </controls>
      <dynamic>
        <clone entry="android.led.transmit" kind="controls"></clone>
      </dynamic>
      <static>
        <entry name="availableLeds" type="byte" visibility="hidden" optional="true"
               enum="true"
               container="array">
          <array>
            <size>n</size>
          </array>
          <enum>
            <value>TRANSMIT
              <notes>android.led.transmit control is used.</notes>
            </value>
          </enum>
          <description>A list of camera LEDs that are available on this system.
          </description>
        </entry>
      </static>
    </section>
    <section name="info">
      <static>
        <entry name="supportedHardwareLevel" type="byte" visibility="public"
               enum="true" hwlevel="legacy">
          <enum>
            <value>
              LIMITED
              <notes>
              This camera device does not have enough capabilities to qualify as a `FULL` device or
              better.

              Only the stream configurations listed in the `LEGACY` and `LIMITED` tables in the
              {@link android.hardware.camera2.CameraDevice#createCaptureSession|ACameraDevice_createCaptureSession
              createCaptureSession} documentation are guaranteed to be supported.

              All `LIMITED` devices support the `BACKWARDS_COMPATIBLE` capability, indicating basic
              support for color image capture. The only exception is that the device may
              alternatively support only the `DEPTH_OUTPUT` capability, if it can only output depth
              measurements and not color images.

              `LIMITED` devices and above require the use of android.control.aePrecaptureTrigger
              to lock exposure metering (and calculate flash power, for cameras with flash) before
              capturing a high-quality still image.

              A `LIMITED` device that only lists the `BACKWARDS_COMPATIBLE` capability is only
              required to support full-automatic operation and post-processing (`OFF` is not
              supported for android.control.aeMode, android.control.afMode, or
              android.control.awbMode)

              Additional capabilities may optionally be supported by a `LIMITED`-level device, and
              can be checked for in android.request.availableCapabilities.
              </notes>
            </value>
            <value>
              FULL
              <notes>
              This camera device is capable of supporting advanced imaging applications.

              The stream configurations listed in the `FULL`, `LEGACY` and `LIMITED` tables in the
              {@link android.hardware.camera2.CameraDevice#createCaptureSession|ACameraDevice_createCaptureSession
              createCaptureSession} documentation are guaranteed to be supported.

              A `FULL` device will support below capabilities:

              * `BURST_CAPTURE` capability (android.request.availableCapabilities contains
                `BURST_CAPTURE`)
              * Per frame control (android.sync.maxLatency `==` PER_FRAME_CONTROL)
              * Manual sensor control (android.request.availableCapabilities contains `MANUAL_SENSOR`)
              * Manual post-processing control (android.request.availableCapabilities contains
                `MANUAL_POST_PROCESSING`)
              * The required exposure time range defined in android.sensor.info.exposureTimeRange
              * The required maxFrameDuration defined in android.sensor.info.maxFrameDuration

              Note:
              Pre-API level 23, FULL devices also supported arbitrary cropping region
              (android.scaler.croppingType `== FREEFORM`); this requirement was relaxed in API level
              23, and `FULL` devices may only support `CENTERED` cropping.
              </notes>
            </value>
            <value>
              LEGACY
              <notes>
              This camera device is running in backward compatibility mode.

              Only the stream configurations listed in the `LEGACY` table in the {@link
              android.hardware.camera2.CameraDevice#createCaptureSession|ACameraDevice_createCaptureSession
              createCaptureSession} documentation are supported.

              A `LEGACY` device does not support per-frame control, manual sensor control, manual
              post-processing, arbitrary cropping regions, and has relaxed performance constraints.
              No additional capabilities beyond `BACKWARD_COMPATIBLE` will ever be listed by a
              `LEGACY` device in android.request.availableCapabilities.

              In addition, the android.control.aePrecaptureTrigger is not functional on `LEGACY`
              devices. Instead, every request that includes a JPEG-format output target is treated
              as triggering a still capture, internally executing a precapture trigger.  This may
              fire the flash for flash power metering during precapture, and then fire the flash
              for the final capture, if a flash is available on the device and the AE mode is set to
              enable the flash.
              </notes>
            </value>
            <value>
              3
              <notes>
              This camera device is capable of YUV reprocessing and RAW data capture, in addition to
              FULL-level capabilities.

              The stream configurations listed in the `LEVEL_3`, `RAW`, `FULL`, `LEGACY` and
              `LIMITED` tables in the {@link
              android.hardware.camera2.CameraDevice#createCaptureSession|ACameraDevice_createCaptureSession
              createCaptureSession} documentation are guaranteed to be supported.

              The following additional capabilities are guaranteed to be supported:

              * `YUV_REPROCESSING` capability (android.request.availableCapabilities contains
                `YUV_REPROCESSING`)
              * `RAW` capability (android.request.availableCapabilities contains
                `RAW`)
              </notes>
            </value>
            <value hal_version="3.3">
              EXTERNAL
              <notes>
              This camera device is backed by an external camera connected to this Android device.

              The device has capability identical to a LIMITED level device, with the following
              exceptions:

              * The device may not report lens/sensor related information such as
                  - android.lens.focalLength
                  - android.lens.info.hyperfocalDistance
                  - android.sensor.info.physicalSize
                  - android.sensor.info.whiteLevel
                  - android.sensor.blackLevelPattern
                  - android.sensor.info.colorFilterArrangement
                  - android.sensor.rollingShutterSkew
              * The device will report 0 for android.sensor.orientation
              * The device has less guarantee on stable framerate, as the framerate partly depends
                on the external camera being used.
              </notes>
            </value>
          </enum>
          <description>
          Generally classifies the overall set of the camera device functionality.
          </description>
          <details>
          The supported hardware level is a high-level description of the camera device's
          capabilities, summarizing several capabilities into one field.  Each level adds additional
          features to the previous one, and is always a strict superset of the previous level.
          The ordering is `LEGACY &lt; LIMITED &lt; FULL &lt; LEVEL_3`.

          Starting from `LEVEL_3`, the level enumerations are guaranteed to be in increasing
          numerical value as well. To check if a given device is at least at a given hardware level,
          the following code snippet can be used:

              // Returns true if the device supports the required hardware level, or better.
              boolean isHardwareLevelSupported(CameraCharacteristics c, int requiredLevel) {
                  int deviceLevel = c.get(CameraCharacteristics.INFO_SUPPORTED_HARDWARE_LEVEL);
                  if (deviceLevel == CameraCharacteristics.INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY) {
                      return requiredLevel == deviceLevel;
                  }
                  // deviceLevel is not LEGACY, can use numerical sort
                  return requiredLevel &lt;= deviceLevel;
              }

          At a high level, the levels are:

          * `LEGACY` devices operate in a backwards-compatibility mode for older
            Android devices, and have very limited capabilities.
          * `LIMITED` devices represent the
            baseline feature set, and may also include additional capabilities that are
            subsets of `FULL`.
          * `FULL` devices additionally support per-frame manual control of sensor, flash, lens and
            post-processing settings, and image capture at a high rate.
          * `LEVEL_3` devices additionally support YUV reprocessing and RAW image capture, along
            with additional output stream configurations.

          See the individual level enums for full descriptions of the supported capabilities.  The
          android.request.availableCapabilities entry describes the device's capabilities at a
          finer-grain level, if needed. In addition, many controls have their available settings or
          ranges defined in individual entries from {@link
          android.hardware.camera2.CameraCharacteristics|ACameraManager_getCameraCharacteristics}.

          Some features are not part of any particular hardware level or capability and must be
          queried separately. These include:

          * Calibrated timestamps (android.sensor.info.timestampSource `==` REALTIME)
          * Precision lens control (android.lens.info.focusDistanceCalibration `==` CALIBRATED)
          * Face detection (android.statistics.info.availableFaceDetectModes)
          * Optical or electrical image stabilization
            (android.lens.info.availableOpticalStabilization,
             android.control.availableVideoStabilizationModes)

          </details>
          <hal_details>
          A camera HALv3 device can implement one of three possible operational modes; LIMITED,
          FULL, and LEVEL_3.

          FULL support or better is expected from new higher-end devices. Limited
          mode has hardware requirements roughly in line with those for a camera HAL device v1
          implementation, and is expected from older or inexpensive devices. Each level is a strict
          superset of the previous level, and they share the same essential operational flow.

          For full details refer to "S3. Operational Modes" in camera3.h

          Camera HAL3+ must not implement LEGACY mode. It is there for backwards compatibility in
          the `android.hardware.camera2` user-facing API only on legacy HALv1 devices, and is
          implemented by the camera framework code.

          EXTERNAL level devices have lower peformance bar in CTS since the peformance might depend
          on the external camera being used and is not fully controlled by the device manufacturer.
          The ITS test suite is exempted for the same reason.
          </hal_details>
        </entry>
        <entry name="version" type="byte" visibility="public" typedef="string" hal_version="3.3">
          <description>
              A short string for manufacturer version information about the camera device, such as
              ISP hardware, sensors, etc.
          </description>
          <details>
              This can be used in {@link android.media.ExifInterface#TAG_IMAGE_DESCRIPTION TAG_IMAGE_DESCRIPTION}
              in jpeg EXIF. This key may be absent if no version information is available on the
              device.
          </details>
          <hal_details>
              The string must consist of only alphanumeric characters, punctuation, and
              whitespace, i.e. it must match regular expression "[\p{Alnum}\p{Punct}\p{Space}]*".
              It must not exceed 256 characters.
          </hal_details>
        </entry>
      </static>
    </section>
    <section name="blackLevel">
      <controls>
        <entry name="lock" type="byte" visibility="public" enum="true"
               typedef="boolean" hwlevel="full">
          <enum>
            <value>OFF</value>
            <value>ON</value>
          </enum>
          <description> Whether black-level compensation is locked
          to its current values, or is free to vary.</description>
          <details>When set to `true` (ON), the values used for black-level
          compensation will not change until the lock is set to
          `false` (OFF).

          Since changes to certain capture parameters (such as
          exposure time) may require resetting of black level
          compensation, the camera device must report whether setting
          the black level lock was successful in the output result
          metadata.

          For example, if a sequence of requests is as follows:

          * Request 1: Exposure = 10ms, Black level lock = OFF
          * Request 2: Exposure = 10ms, Black level lock = ON
          * Request 3: Exposure = 10ms, Black level lock = ON
          * Request 4: Exposure = 20ms, Black level lock = ON
          * Request 5: Exposure = 20ms, Black level lock = ON
          * Request 6: Exposure = 20ms, Black level lock = ON

          And the exposure change in Request 4 requires the camera
          device to reset the black level offsets, then the output
          result metadata is expected to be:

          * Result 1: Exposure = 10ms, Black level lock = OFF
          * Result 2: Exposure = 10ms, Black level lock = ON
          * Result 3: Exposure = 10ms, Black level lock = ON
          * Result 4: Exposure = 20ms, Black level lock = OFF
          * Result 5: Exposure = 20ms, Black level lock = ON
          * Result 6: Exposure = 20ms, Black level lock = ON

          This indicates to the application that on frame 4, black
          levels were reset due to exposure value changes, and pixel
          values may not be consistent across captures.

          The camera device will maintain the lock to the extent
          possible, only overriding the lock to OFF when changes to
          other request parameters require a black level recalculation
          or reset.
          </details>
          <hal_details>
          If for some reason black level locking is no longer possible
          (for example, the analog gain has changed, which forces
          black level offsets to be recalculated), then the HAL must
          override this request (and it must report 'OFF' when this
          does happen) until the next capture for which locking is
          possible again.</hal_details>
          <tag id="HAL2" />
        </entry>
      </controls>
      <dynamic>
        <clone entry="android.blackLevel.lock"
          kind="controls">
          <details>
            Whether the black level offset was locked for this frame.  Should be
            ON if android.blackLevel.lock was ON in the capture request, unless
            a change in other capture settings forced the camera device to
            perform a black level reset.
          </details>
        </clone>
      </dynamic>
    </section>
    <section name="sync">
      <dynamic>
        <entry name="frameNumber" type="int64" visibility="ndk_public"
               enum="true" hwlevel="legacy">
          <enum>
            <value id="-1">CONVERGING
              <notes>
              The current result is not yet fully synchronized to any request.

              Synchronization is in progress, and reading metadata from this
              result may include a mix of data that have taken effect since the
              last synchronization time.

              In some future result, within android.sync.maxLatency frames,
              this value will update to the actual frame number frame number
              the result is guaranteed to be synchronized to (as long as the
              request settings remain constant).
            </notes>
            </value>
            <value id="-2">UNKNOWN
              <notes>
              The current result's synchronization status is unknown.

              The result may have already converged, or it may be in
              progress.  Reading from this result may include some mix
              of settings from past requests.

              After a settings change, the new settings will eventually all
              take effect for the output buffers and results. However, this
              value will not change when that happens. Altering settings
              rapidly may provide outcomes using mixes of settings from recent
              requests.

              This value is intended primarily for backwards compatibility with
              the older camera implementations (for android.hardware.Camera).
            </notes>
            </value>
          </enum>
          <description>The frame number corresponding to the last request
          with which the output result (metadata + buffers) has been fully
          synchronized.</description>
          <range>Either a non-negative value corresponding to a
          `frame_number`, or one of the two enums (CONVERGING / UNKNOWN).
          </range>
          <details>
          When a request is submitted to the camera device, there is usually a
          delay of several frames before the controls get applied. A camera
          device may either choose to account for this delay by implementing a
          pipeline and carefully submit well-timed atomic control updates, or
          it may start streaming control changes that span over several frame
          boundaries.

          In the latter case, whenever a request's settings change relative to
          the previous submitted request, the full set of changes may take
          multiple frame durations to fully take effect. Some settings may
          take effect sooner (in less frame durations) than others.

          While a set of control changes are being propagated, this value
          will be CONVERGING.

          Once it is fully known that a set of control changes have been
          finished propagating, and the resulting updated control settings
          have been read back by the camera device, this value will be set
          to a non-negative frame number (corresponding to the request to
          which the results have synchronized to).

          Older camera device implementations may not have a way to detect
          when all camera controls have been applied, and will always set this
          value to UNKNOWN.

          FULL capability devices will always have this value set to the
          frame number of the request corresponding to this result.

          _Further details_:

          * Whenever a request differs from the last request, any future
          results not yet returned may have this value set to CONVERGING (this
          could include any in-progress captures not yet returned by the camera
          device, for more details see pipeline considerations below).
          * Submitting a series of multiple requests that differ from the
          previous request (e.g. r1, r2, r3 s.t. r1 != r2 != r3)
          moves the new synchronization frame to the last non-repeating
          request (using the smallest frame number from the contiguous list of
          repeating requests).
          * Submitting the same request repeatedly will not change this value
          to CONVERGING, if it was already a non-negative value.
          * When this value changes to non-negative, that means that all of the
          metadata controls from the request have been applied, all of the
          metadata controls from the camera device have been read to the
          updated values (into the result), and all of the graphics buffers
          corresponding to this result are also synchronized to the request.

          _Pipeline considerations_:

          Submitting a request with updated controls relative to the previously
          submitted requests may also invalidate the synchronization state
          of all the results corresponding to currently in-flight requests.

          In other words, results for this current request and up to
          android.request.pipelineMaxDepth prior requests may have their
          android.sync.frameNumber change to CONVERGING.
          </details>
          <hal_details>
          Using UNKNOWN here is illegal unless android.sync.maxLatency
          is also UNKNOWN.

          FULL capability devices should simply set this value to the
          `frame_number` of the request this result corresponds to.
          </hal_details>
          <tag id="V1" />
        </entry>
      </dynamic>
      <static>
        <entry name="maxLatency" type="int32" visibility="public" enum="true"
               hwlevel="legacy">
          <enum>
            <value id="0">PER_FRAME_CONTROL
              <notes>
              Every frame has the requests immediately applied.

              Changing controls over multiple requests one after another will
              produce results that have those controls applied atomically
              each frame.

              All FULL capability devices will have this as their maxLatency.
              </notes>
            </value>
            <value id="-1">UNKNOWN
              <notes>
              Each new frame has some subset (potentially the entire set)
              of the past requests applied to the camera settings.

              By submitting a series of identical requests, the camera device
              will eventually have the camera settings applied, but it is
              unknown when that exact point will be.

              All LEGACY capability devices will have this as their maxLatency.
              </notes>
            </value>
          </enum>
          <description>
          The maximum number of frames that can occur after a request
          (different than the previous) has been submitted, and before the
          result's state becomes synchronized.
          </description>
          <units>Frame counts</units>
          <range>A positive value, PER_FRAME_CONTROL, or UNKNOWN.</range>
          <details>
          This defines the maximum distance (in number of metadata results),
          between the frame number of the request that has new controls to apply
          and the frame number of the result that has all the controls applied.

          In other words this acts as an upper boundary for how many frames
          must occur before the camera device knows for a fact that the new
          submitted camera settings have been applied in outgoing frames.
          </details>
          <hal_details>
          For example if maxLatency was 2,

              initial request = X (repeating)
              request1 = X
              request2 = Y
              request3 = Y
              request4 = Y

              where requestN has frameNumber N, and the first of the repeating
              initial request's has frameNumber F (and F &lt; 1).

              initial result = X' + { android.sync.frameNumber == F }
              result1 = X' + { android.sync.frameNumber == F }
              result2 = X' + { android.sync.frameNumber == CONVERGING }
              result3 = X' + { android.sync.frameNumber == CONVERGING }
              result4 = X' + { android.sync.frameNumber == 2 }

              where resultN has frameNumber N.

          Since `result4` has a `frameNumber == 4` and
          `android.sync.frameNumber == 2`, the distance is clearly
          `4 - 2 = 2`.

          Use `frame_count` from camera3_request_t instead of
          android.request.frameCount or
          `{@link android.hardware.camera2.CaptureResult#getFrameNumber}`.

          LIMITED devices are strongly encouraged to use a non-negative
          value. If UNKNOWN is used here then app developers do not have a way
          to know when sensor settings have been applied.
          </hal_details>
          <tag id="V1" />
        </entry>
      </static>
    </section>
    <section name="reprocess">
      <controls>
        <entry name="effectiveExposureFactor" type="float" visibility="java_public" hwlevel="limited">
            <description>
            The amount of exposure time increase factor applied to the original output
            frame by the application processing before sending for reprocessing.
            </description>
            <units>Relative exposure time increase factor.</units>
            <range> &amp;gt;= 1.0</range>
            <details>
            This is optional, and will be supported if the camera device supports YUV_REPROCESSING
            capability (android.request.availableCapabilities contains YUV_REPROCESSING).

            For some YUV reprocessing use cases, the application may choose to filter the original
            output frames to effectively reduce the noise to the same level as a frame that was
            captured with longer exposure time. To be more specific, assuming the original captured
            images were captured with a sensitivity of S and an exposure time of T, the model in
            the camera device is that the amount of noise in the image would be approximately what
            would be expected if the original capture parameters had been a sensitivity of
            S/effectiveExposureFactor and an exposure time of T*effectiveExposureFactor, rather
            than S and T respectively. If the captured images were processed by the application
            before being sent for reprocessing, then the application may have used image processing
            algorithms and/or multi-frame image fusion to reduce the noise in the
            application-processed images (input images). By using the effectiveExposureFactor
            control, the application can communicate to the camera device the actual noise level
            improvement in the application-processed image. With this information, the camera
            device can select appropriate noise reduction and edge enhancement parameters to avoid
            excessive noise reduction (android.noiseReduction.mode) and insufficient edge
            enhancement (android.edge.mode) being applied to the reprocessed frames.

            For example, for multi-frame image fusion use case, the application may fuse
            multiple output frames together to a final frame for reprocessing. When N image are
            fused into 1 image for reprocessing, the exposure time increase factor could be up to
            square root of N (based on a simple photon shot noise model). The camera device will
            adjust the reprocessing noise reduction and edge enhancement parameters accordingly to
            produce the best quality images.

            This is relative factor, 1.0 indicates the application hasn't processed the input
            buffer in a way that affects its effective exposure time.

            This control is only effective for YUV reprocessing capture request. For noise
            reduction reprocessing, it is only effective when `android.noiseReduction.mode != OFF`.
            Similarly, for edge enhancement reprocessing, it is only effective when
            `android.edge.mode != OFF`.
            </details>
          <tag id="REPROC" />
        </entry>
      </controls>
      <dynamic>
      <clone entry="android.reprocess.effectiveExposureFactor" kind="controls">
      </clone>
      </dynamic>
      <static>
        <entry name="maxCaptureStall" type="int32" visibility="java_public" hwlevel="limited">
          <description>
          The maximal camera capture pipeline stall (in unit of frame count) introduced by a
          reprocess capture request.
          </description>
          <units>Number of frames.</units>
          <range> &amp;lt;= 4</range>
          <details>
          The key describes the maximal interference that one reprocess (input) request
          can introduce to the camera simultaneous streaming of regular (output) capture
          requests, including repeating requests.

          When a reprocessing capture request is submitted while a camera output repeating request
          (e.g. preview) is being served by the camera device, it may preempt the camera capture
          pipeline for at least one frame duration so that the camera device is unable to process
          the following capture request in time for the next sensor start of exposure boundary.
          When this happens, the application may observe a capture time gap (longer than one frame
          duration) between adjacent capture output frames, which usually exhibits as preview
          glitch if the repeating request output targets include a preview surface. This key gives
          the worst-case number of frame stall introduced by one reprocess request with any kind of
          formats/sizes combination.

          If this key reports 0, it means a reprocess request doesn't introduce any glitch to the
          ongoing camera repeating request outputs, as if this reprocess request is never issued.

          This key is supported if the camera device supports PRIVATE or YUV reprocessing (
          i.e. android.request.availableCapabilities contains PRIVATE_REPROCESSING or
          YUV_REPROCESSING).
          </details>
          <tag id="REPROC" />
        </entry>
      </static>
    </section>
    <section name="depth">
      <static>
        <entry name="maxDepthSamples" type="int32" visibility="system" hwlevel="limited">
          <description>Maximum number of points that a depth point cloud may contain.
          </description>
          <details>
            If a camera device supports outputting depth range data in the form of a depth point
            cloud ({@link android.graphics.ImageFormat#DEPTH_POINT_CLOUD}), this is the maximum
            number of points an output buffer may contain.

            Any given buffer may contain between 0 and maxDepthSamples points, inclusive.
            If output in the depth point cloud format is not supported, this entry will
            not be defined.
          </details>
          <tag id="DEPTH" />
        </entry>
        <entry name="availableDepthStreamConfigurations" type="int32" visibility="ndk_public"
               enum="true" container="array" typedef="streamConfiguration" hwlevel="limited">
          <array>
            <size>n</size>
            <size>4</size>
          </array>
          <enum>
            <value>OUTPUT</value>
            <value>INPUT</value>
          </enum>
          <description>The available depth dataspace stream
          configurations that this camera device supports
          (i.e. format, width, height, output/input stream).
          </description>
          <details>
            These are output stream configurations for use with
            dataSpace HAL_DATASPACE_DEPTH. The configurations are
            listed as `(format, width, height, input?)` tuples.

            Only devices that support depth output for at least
            the HAL_PIXEL_FORMAT_Y16 dense depth map may include
            this entry.

            A device that also supports the HAL_PIXEL_FORMAT_BLOB
            sparse depth point cloud must report a single entry for
            the format in this list as `(HAL_PIXEL_FORMAT_BLOB,
            android.depth.maxDepthSamples, 1, OUTPUT)` in addition to
            the entries for HAL_PIXEL_FORMAT_Y16.
          </details>
          <tag id="DEPTH" />
        </entry>
        <entry name="availableDepthMinFrameDurations" type="int64" visibility="ndk_public"
               container="array" typedef="streamConfigurationDuration" hwlevel="limited">
          <array>
            <size>4</size>
            <size>n</size>
          </array>
          <description>This lists the minimum frame duration for each
          format/size combination for depth output formats.
          </description>
          <units>(format, width, height, ns) x n</units>
          <details>
          This should correspond to the frame duration when only that
          stream is active, with all processing (typically in android.*.mode)
          set to either OFF or FAST.

          When multiple streams are used in a request, the minimum frame
          duration will be max(individual stream min durations).

          The minimum frame duration of a stream (of a particular format, size)
          is the same regardless of whether the stream is input or output.

          See android.sensor.frameDuration and
          android.scaler.availableStallDurations for more details about
          calculating the max frame rate.
          </details>
          <tag id="DEPTH" />
        </entry>
        <entry name="availableDepthStallDurations" type="int64" visibility="ndk_public"
               container="array" typedef="streamConfigurationDuration" hwlevel="limited">
          <array>
            <size>4</size>
            <size>n</size>
          </array>
          <description>This lists the maximum stall duration for each
          output format/size combination for depth streams.
          </description>
          <units>(format, width, height, ns) x n</units>
          <details>
          A stall duration is how much extra time would get added
          to the normal minimum frame duration for a repeating request
          that has streams with non-zero stall.

          This functions similarly to
          android.scaler.availableStallDurations for depth
          streams.

          All depth output stream formats may have a nonzero stall
          duration.
          </details>
          <tag id="DEPTH" />
        </entry>
        <entry name="depthIsExclusive" type="byte" visibility="public"
               enum="true" typedef="boolean" hwlevel="limited">
          <enum>
            <value>FALSE</value>
            <value>TRUE</value>
          </enum>
          <description>Indicates whether a capture request may target both a
          DEPTH16 / DEPTH_POINT_CLOUD output, and normal color outputs (such as
          YUV_420_888, JPEG, or RAW) simultaneously.
          </description>
          <details>
          If TRUE, including both depth and color outputs in a single
          capture request is not supported. An application must interleave color
          and depth requests.  If FALSE, a single request can target both types
          of output.

          Typically, this restriction exists on camera devices that
          need to emit a specific pattern or wavelength of light to
          measure depth values, which causes the color image to be
          corrupted during depth measurement.
          </details>
        </entry>
      </static>
    </section>
    <section name="logicalMultiCamera">
      <static>
        <entry name="physicalIds" type="byte" visibility="hidden"
               container="array" hwlevel="limited" hal_version="3.3">
          <array>
            <size>n</size>
          </array>
          <description>String containing the ids of the underlying physical cameras.
          </description>
          <units>UTF-8 null-terminated string</units>
          <details>
            For a logical camera, this is concatenation of all underlying physical camera ids.
            The null terminator for physical camera id must be preserved so that the whole string
            can be tokenized using '\0' to generate list of physical camera ids.

            For example, if the physical camera ids of the logical camera are "2" and "3", the
            value of this tag will be ['2', '\0', '3', '\0'].

            The number of physical camera ids must be no less than 2.
          </details>
          <tag id="LOGICALCAMERA" />
        </entry>
        <entry name="sensorSyncType" type="byte" visibility="public"
               enum="true" hwlevel="limited" hal_version="3.3">
          <enum>
            <value>APPROXIMATE
              <notes>
              A software mechanism is used to synchronize between the physical cameras. As a result,
              the timestamp of an image from a physical stream is only an approximation of the
              image sensor start-of-exposure time.
              </notes>
            </value>
            <value>CALIBRATED
              <notes>
              The camera device supports frame timestamp synchronization at the hardware level,
              and the timestamp of a physical stream image accurately reflects its
              start-of-exposure time.
              </notes>
            </value>
          </enum>
          <description>The accuracy of frame timestamp synchronization between physical cameras</description>
          <details>
          The accuracy of the frame timestamp synchronization determines the physical cameras'
          ability to start exposure at the same time. If the sensorSyncType is CALIBRATED,
          the physical camera sensors usually run in master-slave mode so that their shutter
          time is synchronized. For APPROXIMATE sensorSyncType, the camera sensors usually run in
          master-master mode, and there could be offset between their start of exposure.

          In both cases, all images generated for a particular capture request still carry the same
          timestamps, so that they can be used to look up the matching frame number and
          onCaptureStarted callback.
          </details>
          <tag id="LOGICALCAMERA" />
        </entry>
      </static>
    </section>
    <section name="distortionCorrection">
      <controls>
        <entry name="mode" type="byte" visibility="public" enum="true" hal_version="3.3">
          <enum>
            <value>OFF
            <notes>No distortion correction is applied.</notes></value>
            <value>FAST <notes>Lens distortion correction is applied without reducing frame rate
            relative to sensor output. It may be the same as OFF if distortion correction would
            reduce frame rate relative to sensor.</notes></value>
            <value>HIGH_QUALITY <notes>High-quality distortion correction is applied, at the cost of
            possibly reduced frame rate relative to sensor output.</notes></value>
          </enum>
          <description>Mode of operation for the lens distortion correction block.</description>
          <range>android.distortionCorrection.availableModes</range>
          <details>The lens distortion correction block attempts to improve image quality by fixing
          radial, tangential, or other geometric aberrations in the camera device's optics.  If
          available, the android.lens.distortion field documents the lens's distortion parameters.

          OFF means no distortion correction is done.

          FAST/HIGH_QUALITY both mean camera device determined distortion correction will be
          applied. HIGH_QUALITY mode indicates that the camera device will use the highest-quality
          correction algorithms, even if it slows down capture rate. FAST means the camera device
          will not slow down capture rate when applying correction. FAST may be the same as OFF if
          any correction at all would slow down capture rate.  Every output stream will have a
          similar amount of enhancement applied.

          The correction only applies to processed outputs such as YUV, JPEG, or DEPTH16; it is not
          applied to any RAW output.  Metadata coordinates such as face rectangles or metering
          regions are also not affected by correction.

          Applications enabling distortion correction need to pay extra attention when converting
          image coordinates between corrected output buffers and the sensor array. For example, if
          the app supports tap-to-focus and enables correction, it then has to apply the distortion
          model described in android.lens.distortion to the image buffer tap coordinates to properly
          calculate the tap position on the sensor active array to be used with
          android.control.afRegions. The same applies in reverse to detected face rectangles if
          they need to be drawn on top of the corrected output buffers.
          </details>
        </entry>
      </controls>
      <static>
        <entry name="availableModes" type="byte" visibility="public"
        type_notes="list of enums" container="array" typedef="enumList" hal_version="3.3">
          <array>
            <size>n</size>
          </array>
          <description>
          List of distortion correction modes for android.distortionCorrection.mode that are
          supported by this camera device.
          </description>
          <range>Any value listed in android.distortionCorrection.mode</range>
          <details>
            No device is required to support this API; such devices will always list only 'OFF'.
            All devices that support this API will list both FAST and HIGH_QUALITY.
          </details>
          <hal_details>
          HAL must support both FAST and HIGH_QUALITY if distortion correction is available
          on the camera device, but the underlying implementation can be the same for both modes.
          That is, if the highest quality implementation on the camera device does not slow down
          capture rate, then FAST and HIGH_QUALITY will generate the same output.
          </hal_details>
          <tag id="V1" />
          <tag id="REPROC" />
        </entry>
      </static>
      <dynamic>
        <clone entry="android.distortionCorrection.mode" kind="controls" hal_version="3.3">
        </clone>
      </dynamic>
    </section>
  </namespace>
</metadata>