Snapshot 7ddd630e136a035ba463c427285c5c3e9f199ee0
Change-Id: If08c7b905da667dd9e5110231e4592842b634006
diff --git a/src/include/bt_target.h b/src/include/bt_target.h
new file mode 100644
index 0000000..d873a20
--- /dev/null
+++ b/src/include/bt_target.h
@@ -0,0 +1,4048 @@
+/******************************************************************************
+ *
+ * Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************/
+#ifndef BT_TARGET_H
+#define BT_TARGET_H
+
+#include "data_types.h"
+
+#ifdef BUILDCFG
+#include "buildcfg.h"
+#endif
+
+/* Include common GKI definitions used by this platform */
+#include "gki_target.h"
+
+#include "bt_types.h" /* This must be defined AFTER buildcfg.h */
+#include "dyn_mem.h" /* defines static and/or dynamic memory for components */
+
+/* #define BYPASS_AVDATATRACE */
+
+/******************************************************************************
+**
+** Platform-Specific
+**
+******************************************************************************/
+
+/* set to FALSE unless using Zeevo */
+#ifndef ZEEVO_CTRL_DEFINED
+#define ZEEVO_CTRL_DEFINED FALSE
+#endif
+
+/* Supporting GPS shared transport */
+#ifndef GPS_INCLUDED
+#define GPS_INCLUDED TRUE
+#endif
+
+/* API macros for simulator */
+
+#define BTAPI
+
+#ifndef BTE_BSE_WRAPPER
+#ifdef BTE_SIM_APP
+#undef BTAPI
+#define BTAPI __declspec(dllexport)
+#endif
+#endif
+
+#define BT_API BTAPI
+#define BTU_API BTAPI
+#define A2D_API BTAPI
+#define VDP_API BTAPI
+#define AVDT_API BTAPI
+#define AVCT_API BTAPI
+#define AVRC_API BTAPI
+#define BIP_API BTAPI
+#define BNEP_API BTAPI
+#define BPP_API BTAPI
+#define BTM_API BTAPI
+#define CTP_API BTAPI
+#define DUN_API BTAPI
+#define FTP_API BTAPI
+#define GAP_API BTAPI
+#define GOEP_API BTAPI
+#define HCI_API BTAPI
+#define HCRP_API BTAPI
+#define HID_API BTAPI
+#define HFP_API BTAPI
+#define HSP2_API BTAPI
+#define ICP_API BTAPI
+#define L2C_API BTAPI
+#define OBX_API BTAPI
+#define OPP_API BTAPI
+#define PAN_API BTAPI
+#define RFC_API BTAPI
+#define RPC_API BTAPI
+#define SDP_API BTAPI
+#define SPP_API BTAPI
+#define TCS_API BTAPI
+#define XML_API BTAPI
+#define BTA_API BTAPI
+#define SBC_API BTAPI
+#define LPM_API BTAPI
+#define AMP_API BTAPI
+#define MCE_API BTAPI
+#define MCA_API BTAPI
+#define GATT_API BTAPI
+#define SMP_API BTAPI
+
+
+/******************************************************************************
+**
+** GKI Buffer Pools
+**
+******************************************************************************/
+
+/* Receives HCI events from the lower-layer. */
+#ifndef HCI_CMD_POOL_ID
+#define HCI_CMD_POOL_ID GKI_POOL_ID_2
+#endif
+
+#ifndef HCI_CMD_POOL_BUF_SIZE
+#define HCI_CMD_POOL_BUF_SIZE GKI_BUF2_SIZE
+#endif
+
+/* Receives ACL data packets from thelower-layer. */
+#ifndef HCI_ACL_POOL_ID
+#define HCI_ACL_POOL_ID GKI_POOL_ID_3
+#endif
+
+#ifndef HCI_ACL_POOL_BUF_SIZE
+#define HCI_ACL_POOL_BUF_SIZE GKI_BUF3_SIZE
+#endif
+
+/* Maximum number of buffers available for ACL receive data. */
+#ifndef HCI_ACL_BUF_MAX
+#define HCI_ACL_BUF_MAX GKI_BUF3_MAX
+#endif
+
+/* Receives SCO data packets from the lower-layer. */
+#ifndef HCI_SCO_POOL_ID
+#define HCI_SCO_POOL_ID GKI_POOL_ID_6
+#endif
+
+/* Not used. */
+#ifndef HCI_DATA_DESCR_POOL_ID
+#define HCI_DATA_DESCR_POOL_ID GKI_POOL_ID_0
+#endif
+
+/* Sends SDP data packets. */
+#ifndef SDP_POOL_ID
+#define SDP_POOL_ID GKI_POOL_ID_2
+#endif
+
+/* Sends RFCOMM command packets. */
+#ifndef RFCOMM_CMD_POOL_ID
+#define RFCOMM_CMD_POOL_ID GKI_POOL_ID_2
+#endif
+
+#ifndef RFCOMM_CMD_POOL_BUF_SIZE
+#define RFCOMM_CMD_POOL_BUF_SIZE GKI_BUF2_SIZE
+#endif
+
+/* Sends RFCOMM data packets. */
+#ifndef RFCOMM_DATA_POOL_ID
+#define RFCOMM_DATA_POOL_ID GKI_POOL_ID_3
+#endif
+
+#ifndef RFCOMM_DATA_POOL_BUF_SIZE
+#define RFCOMM_DATA_POOL_BUF_SIZE GKI_BUF3_SIZE
+#endif
+
+/* Sends L2CAP packets to the peer and HCI messages to the controller. */
+#ifndef L2CAP_CMD_POOL_ID
+#define L2CAP_CMD_POOL_ID GKI_POOL_ID_2
+#endif
+
+/* Sends L2CAP segmented packets in ERTM mode */
+#ifndef L2CAP_FCR_TX_POOL_ID
+#define L2CAP_FCR_TX_POOL_ID HCI_ACL_POOL_ID
+#endif
+
+/* Receives L2CAP segmented packets in ERTM mode */
+#ifndef L2CAP_FCR_RX_POOL_ID
+#define L2CAP_FCR_RX_POOL_ID HCI_ACL_POOL_ID
+#endif
+
+/* Used by BTM when it sends HCI commands to the controller. */
+#ifndef BTM_CMD_POOL_ID
+#define BTM_CMD_POOL_ID GKI_POOL_ID_2
+#endif
+
+/* Sends TCS messages. */
+#ifndef TCS_MSG_POOL_ID
+#define TCS_MSG_POOL_ID GKI_POOL_ID_2
+#endif
+
+#ifndef OBX_CMD_POOL_SIZE
+#define OBX_CMD_POOL_SIZE GKI_BUF2_SIZE
+#endif
+
+#ifndef OBX_LRG_DATA_POOL_SIZE
+#define OBX_LRG_DATA_POOL_SIZE GKI_BUF4_SIZE
+#endif
+
+#ifndef OBX_LRG_DATA_POOL_ID
+#define OBX_LRG_DATA_POOL_ID GKI_POOL_ID_4
+#endif
+
+/* Used for CTP discovery database. */
+#ifndef CTP_SDP_DB_POOL_ID
+#define CTP_SDP_DB_POOL_ID GKI_POOL_ID_3
+#endif
+
+/* Used for CTP data exchange feature. */
+#ifndef CTP_DATA_EXCHG_POOL_ID
+#define CTP_DATA_EXCHG_POOL_ID GKI_POOL_ID_2
+#endif
+
+/* Used to send data to L2CAP. */
+#ifndef GAP_DATA_POOL_ID
+#define GAP_DATA_POOL_ID GKI_POOL_ID_3
+#endif
+
+/* Used for SPP inquiry and discovery databases. */
+#ifndef SPP_DB_POOL_ID
+#define SPP_DB_POOL_ID GKI_POOL_ID_3
+#endif
+
+#ifndef SPP_DB_SIZE
+#define SPP_DB_SIZE GKI_BUF3_SIZE
+#endif
+
+/* HCRP protocol and internal commands. */
+#ifndef HCRP_CMD_POOL_ID
+#define HCRP_CMD_POOL_ID GKI_POOL_ID_2
+#endif
+
+#ifndef HCRP_CMD_POOL_SIZE
+#define HCRP_CMD_POOL_SIZE GKI_BUF2_SIZE
+#endif
+
+#ifndef BIP_EVT_POOL_SIZE
+#define BIP_EVT_POOL_SIZE GKI_BUF3_SIZE
+#endif
+
+#ifndef BIP_DB_SIZE
+#define BIP_DB_SIZE GKI_BUF3_SIZE
+#endif
+
+
+/* BNEP data and protocol messages. */
+#ifndef BNEP_POOL_ID
+#define BNEP_POOL_ID GKI_POOL_ID_3
+#endif
+
+/* RPC pool for temporary trace message buffers. */
+#ifndef RPC_SCRATCH_POOL_ID
+#define RPC_SCRATCH_POOL_ID GKI_POOL_ID_2
+#endif
+
+/* RPC scratch buffer size (not related to RPC_SCRATCH_POOL_ID) */
+#ifndef RPC_SCRATCH_BUF_SIZE
+#define RPC_SCRATCH_BUF_SIZE GKI_BUF3_SIZE
+#endif
+
+/* RPC pool for protocol messages */
+#ifndef RPC_MSG_POOL_ID
+#define RPC_MSG_POOL_ID GKI_POOL_ID_3
+#endif
+
+#ifndef RPC_MSG_POOL_SIZE
+#define RPC_MSG_POOL_SIZE GKI_BUF3_SIZE
+#endif
+
+/* AVDTP pool for protocol messages */
+#ifndef AVDT_CMD_POOL_ID
+#define AVDT_CMD_POOL_ID GKI_POOL_ID_2
+#endif
+
+/* AVDTP pool size for media packets in case of fragmentation */
+#ifndef AVDT_DATA_POOL_SIZE
+#define AVDT_DATA_POOL_SIZE GKI_BUF3_SIZE
+#endif
+
+#ifndef PAN_POOL_ID
+#define PAN_POOL_ID GKI_POOL_ID_3
+#endif
+
+/* UNV pool for read/write serialization */
+#ifndef UNV_MSG_POOL_ID
+#define UNV_MSG_POOL_ID GKI_POOL_ID_2
+#endif
+
+#ifndef UNV_MSG_POOL_SIZE
+#define UNV_MSG_POOL_SIZE GKI_BUF2_SIZE
+#endif
+
+/* AVCTP pool for protocol messages */
+#ifndef AVCT_CMD_POOL_ID
+#define AVCT_CMD_POOL_ID GKI_POOL_ID_1
+#endif
+
+#ifndef AVCT_META_CMD_POOL_ID
+#define AVCT_META_CMD_POOL_ID GKI_POOL_ID_2
+#endif
+
+/* AVRCP pool for protocol messages */
+#ifndef AVRC_CMD_POOL_ID
+#define AVRC_CMD_POOL_ID GKI_POOL_ID_1
+#endif
+
+/* AVRCP pool size for protocol messages */
+#ifndef AVRC_CMD_POOL_SIZE
+#define AVRC_CMD_POOL_SIZE GKI_BUF1_SIZE
+#endif
+
+/* AVRCP Metadata pool for protocol messages */
+#ifndef AVRC_META_CMD_POOL_ID
+#define AVRC_META_CMD_POOL_ID GKI_POOL_ID_2
+#endif
+
+/* AVRCP Metadata pool size for protocol messages */
+#ifndef AVRC_META_CMD_POOL_SIZE
+#define AVRC_META_CMD_POOL_SIZE GKI_BUF2_SIZE
+#endif
+
+
+/* AVRCP buffer size for browsing channel messages */
+#ifndef AVRC_BROWSE_POOL_SIZE
+#define AVRC_BROWSE_POOL_SIZE GKI_MAX_BUF_SIZE
+#endif
+
+/* HDP buffer size for the Pulse Oximeter */
+#ifndef BTA_HL_LRG_DATA_POOL_SIZE
+#define BTA_HL_LRG_DATA_POOL_SIZE GKI_BUF7_SIZE
+#endif
+
+#ifndef BTA_HL_LRG_DATA_POOL_ID
+#define BTA_HL_LRG_DATA_POOL_ID GKI_POOL_ID_7
+#endif
+
+/* GATT Server Database pool ID */
+#ifndef GATT_DB_POOL_ID
+#define GATT_DB_POOL_ID GKI_POOL_ID_8
+#endif
+
+
+/******************************************************************************
+**
+** Lower Layer Interface
+**
+******************************************************************************/
+
+/* Sends ACL data received over HCI to the upper stack. */
+#ifndef HCI_ACL_DATA_TO_UPPER
+#define HCI_ACL_DATA_TO_UPPER(p) {((BT_HDR *)p)->event = BT_EVT_TO_BTU_HCI_ACL; GKI_send_msg (BTU_TASK, BTU_HCI_RCV_MBOX, p);}
+#endif
+
+/* Sends SCO data received over HCI to the upper stack. */
+#ifndef HCI_SCO_DATA_TO_UPPER
+#define HCI_SCO_DATA_TO_UPPER(p) {((BT_HDR *)p)->event = BT_EVT_TO_BTU_HCI_SCO; GKI_send_msg (BTU_TASK, BTU_HCI_RCV_MBOX, p);}
+#endif
+
+/* Sends an HCI event received over HCI to theupper stack. */
+#ifndef HCI_EVT_TO_UPPER
+#define HCI_EVT_TO_UPPER(p) {((BT_HDR *)p)->event = BT_EVT_TO_BTU_HCI_EVT; GKI_send_msg (BTU_TASK, BTU_HCI_RCV_MBOX, p);}
+#endif
+
+/* HCI 4 wire power management protocol. */
+#ifndef HCILL_INCLUDED
+#define HCILL_INCLUDED FALSE
+#endif
+
+/* Macro for allocating buffer for HCI commands */
+#ifndef HCI_GET_CMD_BUF
+#if (!defined(HCI_USE_VARIABLE_SIZE_CMD_BUF) || (HCI_USE_VARIABLE_SIZE_CMD_BUF == FALSE))
+/* Allocate fixed-size buffer from HCI_CMD_POOL (default case) */
+#define HCI_GET_CMD_BUF(paramlen) ((BT_HDR *)GKI_getpoolbuf (HCI_CMD_POOL_ID))
+#else
+/* Allocate smallest possible buffer (for platforms with limited RAM) */
+#define HCI_GET_CMD_BUF(paramlen) ((BT_HDR *)GKI_getbuf ((UINT16)(BT_HDR_SIZE + HCIC_PREAMBLE_SIZE + (paramlen))))
+#endif
+#endif /* HCI_GET_CMD_BUF */
+
+/******************************************************************************
+**
+** HCI Services (H4)
+**
+******************************************************************************/
+#ifndef HCISU_H4_INCLUDED
+#define HCISU_H4_INCLUDED FALSE
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+BT_API extern void bte_ncisu_send (BT_HDR *p_pkt, UINT16 event);
+BT_API extern void bte_hcisu_send (BT_HDR *p_msg, UINT16 event);
+#if (HCISU_H4_INCLUDED == TRUE)
+BT_API extern void bte_hcisu_lp_allow_bt_device_sleep (void);
+BT_API extern void bte_hcisu_lp_wakeup_host (void);
+BT_API extern void bte_hcisu_lp_h4ibss_evt(UINT8 *p, UINT8 evt_len);
+#endif
+
+/* HCILL API for the applications */
+typedef void (tHCILL_SLEEP_ACK)(void);
+BT_API extern void HCILL_GoToSleep( tHCILL_SLEEP_ACK *sl_ack_fn);
+typedef void (tHCILL_STATE_CBACK)(BOOLEAN is_sleep);
+BT_API extern void HCILL_RegState( tHCILL_STATE_CBACK *p_cback);
+#ifdef __cplusplus
+}
+#endif
+
+/* Sends ACL data received from the upper stack to the BD/EDR HCI transport. */
+#ifndef HCI_ACL_DATA_TO_LOWER
+#define HCI_ACL_DATA_TO_LOWER(p) bte_hcisu_send((BT_HDR *)(p), BT_EVT_TO_LM_HCI_ACL);
+#endif
+
+#ifndef HCI_BLE_ACL_DATA_TO_LOWER
+#define HCI_BLE_ACL_DATA_TO_LOWER(p) bte_hcisu_send((BT_HDR *)(p), (UINT16)(BT_EVT_TO_LM_HCI_ACL|LOCAL_BLE_CONTROLLER_ID));
+#endif
+
+/* Sends ACL data received from the upper stack to the AMP HCI transport. */
+#ifndef HCI_AMP_DATA_TO_LOWER
+#define HCI_AMP_DATA_TO_LOWER(p,x) bte_hcisu_send((BT_HDR *)(p), (UINT16)(BT_EVT_TO_LM_HCI_ACL|((UINT16)(x))));
+#endif
+
+/* Sends SCO data received from the upper stack to the HCI transport. */
+#ifndef HCI_SCO_DATA_TO_LOWER
+#define HCI_SCO_DATA_TO_LOWER(p) bte_hcisu_send((BT_HDR *)(p), BT_EVT_TO_LM_HCI_SCO);
+#endif
+
+/* Sends an HCI command received from the upper stack to the BD/EDR HCI transport. */
+#ifndef HCI_CMD_TO_LOWER
+#define HCI_CMD_TO_LOWER(p) bte_hcisu_send((BT_HDR *)(p), BT_EVT_TO_LM_HCI_CMD);
+#endif
+
+/* Sends an HCI command received from the upper stack to the AMP HCI transport. */
+#ifndef HCI_CMD_TO_AMP
+#define HCI_CMD_TO_AMP(x,p) bte_hcisu_send((BT_HDR *)(p), (UINT16)(BT_EVT_TO_LM_HCI_CMD|((UINT16)(x))));
+#endif
+
+/* Sends an LM Diagnosic command received from the upper stack to the HCI transport. */
+#ifndef HCI_LM_DIAG_TO_LOWER
+#define HCI_LM_DIAG_TO_LOWER(p) bte_hcisu_send((BT_HDR *)(p), BT_EVT_TO_LM_DIAG);
+#endif
+
+/* Send HCISU a message to allow BT sleep */
+#ifndef HCI_LP_ALLOW_BT_DEVICE_SLEEP
+#if (HCISU_H4_INCLUDED == TRUE)
+#define HCI_LP_ALLOW_BT_DEVICE_SLEEP() bte_hcisu_lp_allow_bt_device_sleep()
+#else
+#define HCI_LP_ALLOW_BT_DEVICE_SLEEP() HCILP_AllowBTDeviceSleep()
+#endif
+#endif
+
+/* Send HCISU a message to wakeup host */
+#ifndef HCI_LP_WAKEUP_HOST
+#if (HCISU_H4_INCLUDED == TRUE)
+#define HCI_LP_WAKEUP_HOST() bte_hcisu_lp_wakeup_host()
+#else
+#define HCI_LP_WAKEUP_HOST() HCILP_WakeupHost()
+#endif
+#endif
+
+/* Send HCISU the received H4IBSS event from controller */
+#ifndef HCI_LP_RCV_H4IBSS_EVT
+#if (HCISU_H4_INCLUDED == TRUE)
+#define HCI_LP_RCV_H4IBSS_EVT(p1, p2) bte_hcisu_lp_h4ibss_evt((UINT8*)(p1), (UINT8)(p2))
+#else
+#define HCI_LP_RCV_H4IBSS_EVT(p1, p2) h4ibss_sleep_mode_evt((UINT8*)(p1), (UINT8)(p2))
+#endif
+#endif
+
+/* If nonzero, the upper-layer sends at most this number of HCI commands to the lower-layer. */
+#ifndef HCI_MAX_SIMUL_CMDS
+#define HCI_MAX_SIMUL_CMDS 0
+#endif
+
+/* Timeout for receiving response to HCI command */
+#ifndef BTU_CMD_CMPL_TIMEOUT
+#define BTU_CMD_CMPL_TIMEOUT 8
+#endif
+
+/* If TRUE, BTU task will check HCISU again when HCI command timer expires */
+#ifndef BTU_CMD_CMPL_TOUT_DOUBLE_CHECK
+#define BTU_CMD_CMPL_TOUT_DOUBLE_CHECK FALSE
+#endif
+
+/* If TRUE, stack is compiled to include MM dual stack functionality */
+#ifndef BTU_DUAL_STACK_MM_INCLUDED
+#define BTU_DUAL_STACK_MM_INCLUDED FALSE
+#endif
+
+/* If TRUE, stack is compiled to support Embedded Lite Stack in BT chip */
+#ifndef BTU_DUAL_STACK_BTC_INCLUDED
+#define BTU_DUAL_STACK_BTC_INCLUDED FALSE
+#endif
+
+/* If TRUE, stack is compiled to support Embedded Lite Stack for AV SNK in BT chip */
+#ifndef BTU_BTC_SNK_INCLUDED
+#define BTU_BTC_SNK_INCLUDED FALSE
+#endif
+
+/* If TRUE, stack is compiled as Lite Stack in Multimedia chip */
+/* If FALSE, stack is compiled as Full Stack in Baseband chip */
+#ifndef BTU_STACK_LITE_ENABLED
+#define BTU_STACK_LITE_ENABLED FALSE
+#endif
+
+/* Transport pause time (BT slot(0.625ms) unit) when switching between BB and MM */
+/* FW is using a tick which is 20 slot unit so if timeout is between 0 to 20 slot */
+/* then actual timeout would be 0 to 12.5ms because it could be beteen ticks. */
+/* if timeout is between 20 to 40 slot then actual timeout would be 12.5 to 25ms */
+#ifndef BTU_DUAL_TRANSPORT_PAUSE_TIME
+#define BTU_DUAL_TRANSPORT_PAUSE_TIME 40
+#endif
+
+/* if UART baudrate is different between BB and MM, it will be updated during switching */
+#ifndef BTU_DUAL_TRANSPORT_BB_BAUDRATE
+#define BTU_DUAL_TRANSPORT_BB_BAUDRATE 115200
+#endif
+
+#ifndef BTU_DUAL_TRANSPORT_MM_BAUDRATE
+#define BTU_DUAL_TRANSPORT_MM_BAUDRATE 921600
+#endif
+
+/* If TRUE, stack is compiled to include the multi-av feature (A2DP packets are duplicated inside controller) */
+#ifndef BTU_MULTI_AV_INCLUDED
+#define BTU_MULTI_AV_INCLUDED FALSE
+#endif
+
+/* Use 2 second for low-resolution systems, override to 1 for high-resolution systems */
+#ifndef BT_1SEC_TIMEOUT
+#define BT_1SEC_TIMEOUT (2)
+#endif
+
+/* Quick Timer */
+/* if L2CAP_FCR_INCLUDED is TRUE then it should have 100 millisecond resolution */
+/* if HCILP_INCLUDED is TRUE then it should have 100 millisecond resolution */
+/* if SLIP_INCLUDED is TRUE then it should have 10 millisecond resolution */
+/* if BCM2045_USE_DELAY is FALSE then it should have 10 millisecond resolution */
+/* if none of them is included then QUICK_TIMER_TICKS_PER_SEC is set to 0 to exclude quick timer */
+#ifndef QUICK_TIMER_TICKS_PER_SEC
+#define QUICK_TIMER_TICKS_PER_SEC 100 /* 10ms timer */
+#endif
+
+/******************************************************************************
+**
+** BTM
+**
+******************************************************************************/
+/* if set to TRUE, stack will automatically send an HCI reset at start-up. To be
+set to FALSE for advanced start-up / shut-down procedures using USER_HW_ENABLE_API
+and USER_HW_DISABLE_API macros */
+#ifndef BTM_AUTOMATIC_HCI_RESET
+#define BTM_AUTOMATIC_HCI_RESET TRUE
+#endif
+
+/* Include BTM Discovery database and code. */
+#ifndef BTM_DISCOVERY_INCLUDED
+#define BTM_DISCOVERY_INCLUDED TRUE
+#endif
+
+/* Include inquiry code. */
+#ifndef BTM_INQUIRY_INCLUDED
+#define BTM_INQUIRY_INCLUDED TRUE
+#endif
+
+/* Cancel Inquiry on incoming SSP - Work around code for a FW issue (CQ#167446). */
+#ifndef BTM_NO_SSP_ON_INQUIRY
+#define BTM_NO_SSP_ON_INQUIRY FALSE
+#endif
+
+/* Include periodic inquiry code (used when BTM_INQUIRY_INCLUDED is TRUE). */
+#ifndef BTM_PERIODIC_INQ_INCLUDED
+#define BTM_PERIODIC_INQ_INCLUDED TRUE
+#endif
+
+/* Include security authorization code */
+#ifndef BTM_AUTHORIZATION_INCLUDED
+#define BTM_AUTHORIZATION_INCLUDED TRUE
+#endif
+
+/* Include the implemenation needed by Pre-Lisbon controller (2.0_EDR or older) */
+#ifndef BTM_PRE_LISBON_INCLUDED
+#define BTM_PRE_LISBON_INCLUDED TRUE
+#endif
+
+
+/* Includes SCO if TRUE */
+#ifndef BTM_SCO_INCLUDED
+#define BTM_SCO_INCLUDED TRUE /* TRUE includes SCO code */
+#endif
+
+/* Includes SCO if TRUE */
+#ifndef BTM_SCO_HCI_INCLUDED
+#define BTM_SCO_HCI_INCLUDED FALSE /* TRUE includes SCO over HCI code */
+#endif
+
+/* Includes WBS if TRUE */
+#ifndef BTM_WBS_INCLUDED
+#define BTM_WBS_INCLUDED FALSE /* TRUE includes WBS code */
+#endif
+
+/* Includes PCM2 support if TRUE */
+#ifndef BTM_PCM2_INCLUDED
+#define BTM_PCM2_INCLUDED FALSE
+#endif
+
+/* If FALSE, AFH channel automatically adjusted based on AMP channel in use */
+/* Set TRUE, if want to bypass AFH channel automatic adjustment and use */
+/* BTA_DM_API_SET_AFH_CHANNELS_ API */
+
+#ifndef BTM_BYPASS_AMP_AUTO_AFH
+#define BTM_BYPASS_AMP_AUTO_AFH FALSE
+#endif
+
+
+/**************************
+** Initial SCO TX credit
+*************************/
+/* max TX SCO data packet size */
+#ifndef BTM_SCO_DATA_SIZE_MAX
+#define BTM_SCO_DATA_SIZE_MAX 240
+#endif
+
+/* maximum BTM buffering capacity */
+#ifndef BTM_SCO_MAX_BUF_CAP
+#define BTM_SCO_MAX_BUF_CAP (BTM_SCO_INIT_XMIT_CREDIT * 4)
+#endif
+
+/* The size in bytes of the BTM inquiry database. */
+#ifndef BTM_INQ_DB_SIZE
+#define BTM_INQ_DB_SIZE 12
+#endif
+
+/* This is set to enable automatic periodic inquiry at startup. */
+#ifndef BTM_ENABLE_AUTO_INQUIRY
+#define BTM_ENABLE_AUTO_INQUIRY FALSE
+#endif
+
+/* This is set to always try to acquire the remote device name. */
+#ifndef BTM_INQ_GET_REMOTE_NAME
+#define BTM_INQ_GET_REMOTE_NAME FALSE
+#endif
+
+/* The inquiry duration in 1.28 second units when auto inquiry is enabled. */
+#ifndef BTM_DEFAULT_INQ_DUR
+#define BTM_DEFAULT_INQ_DUR 5
+#endif
+
+/* The inquiry mode when auto inquiry is enabled. */
+#ifndef BTM_DEFAULT_INQ_MODE
+#define BTM_DEFAULT_INQ_MODE BTM_GENERAL_INQUIRY
+#endif
+
+/* The default periodic inquiry maximum delay when auto inquiry is enabled, in 1.28 second units. */
+#ifndef BTM_DEFAULT_INQ_MAX_DELAY
+#define BTM_DEFAULT_INQ_MAX_DELAY 30
+#endif
+
+/* The default periodic inquiry minimum delay when auto inquiry is enabled, in 1.28 second units. */
+#ifndef BTM_DEFAULT_INQ_MIN_DELAY
+#define BTM_DEFAULT_INQ_MIN_DELAY 20
+#endif
+
+/* The maximum age of entries in inquiry database in seconds ('0' disables feature). */
+#ifndef BTM_INQ_MAX_AGE
+#define BTM_INQ_MAX_AGE 0
+#endif
+
+/* The maximum age of entries in inquiry database based on inquiry response failure ('0' disables feature). */
+#ifndef BTM_INQ_AGE_BY_COUNT
+#define BTM_INQ_AGE_BY_COUNT 0
+#endif
+
+/* TRUE if controller does not support inquiry event filtering. */
+#ifndef BTM_BYPASS_EVENT_FILTERING
+#define BTM_BYPASS_EVENT_FILTERING FALSE
+#endif
+
+/* TRUE if inquiry filtering is desired from BTM. */
+#ifndef BTM_USE_INQ_RESULTS_FILTER
+#define BTM_USE_INQ_RESULTS_FILTER TRUE
+#endif
+
+/* The default scan mode */
+#ifndef BTM_DEFAULT_SCAN_TYPE
+#define BTM_DEFAULT_SCAN_TYPE BTM_SCAN_TYPE_INTERLACED
+#endif
+
+/* Should connections to unknown devices be allowed when not discoverable? */
+#ifndef BTM_ALLOW_CONN_IF_NONDISCOVER
+#define BTM_ALLOW_CONN_IF_NONDISCOVER FALSE
+#endif
+
+/* When connectable mode is set to TRUE, the device will respond to paging. */
+#ifndef BTM_IS_CONNECTABLE
+#define BTM_IS_CONNECTABLE FALSE
+#endif
+
+/* Sets the Page_Scan_Window: the length of time that the device is performing a page scan. */
+#ifndef BTM_DEFAULT_CONN_WINDOW
+#define BTM_DEFAULT_CONN_WINDOW 0x0012
+#endif
+
+/* Sets the Page_Scan_Activity: the interval between the start of two consecutive page scans. */
+#ifndef BTM_DEFAULT_CONN_INTERVAL
+#define BTM_DEFAULT_CONN_INTERVAL 0x0800
+#endif
+
+/* This is set to automatically perform inquiry scan on startup. */
+#ifndef BTM_IS_DISCOVERABLE
+#define BTM_IS_DISCOVERABLE FALSE
+#endif
+
+/* When automatic inquiry scan is enabled, this sets the discovery mode. */
+#ifndef BTM_DEFAULT_DISC_MODE
+#define BTM_DEFAULT_DISC_MODE BTM_GENERAL_DISCOVERABLE
+#endif
+
+/* When automatic inquiry scan is enabled, this sets the inquiry scan window. */
+#ifndef BTM_DEFAULT_DISC_WINDOW
+#define BTM_DEFAULT_DISC_WINDOW 0x0012
+#endif
+
+/* When automatic inquiry scan is enabled, this sets the inquiry scan interval. */
+#ifndef BTM_DEFAULT_DISC_INTERVAL
+#define BTM_DEFAULT_DISC_INTERVAL 0x0800
+#endif
+
+/* Sets the period, in seconds, to automatically perform service discovery. */
+#ifndef BTM_AUTO_DISCOVERY_PERIOD
+#define BTM_AUTO_DISCOVERY_PERIOD 0
+#endif
+
+/* The size in bytes of the BTM discovery database (if discovery is included). */
+#ifndef BTM_DISCOVERY_DB_SIZE
+#define BTM_DISCOVERY_DB_SIZE 4000
+#endif
+
+/* Number of milliseconds to delay BTU task startup upon device initialization. */
+#ifndef BTU_STARTUP_DELAY
+#define BTU_STARTUP_DELAY 0
+#endif
+
+/* Whether BTA is included in BTU task. */
+#ifndef BTU_BTA_INCLUDED
+#define BTU_BTA_INCLUDED FALSE
+#endif
+
+/* Number of seconds to wait to send an HCI Reset command upon device initialization. */
+#ifndef BTM_FIRST_RESET_DELAY
+#define BTM_FIRST_RESET_DELAY 0
+#endif
+
+/* The number of seconds to wait for controller module to reset after issuing an HCI Reset command. */
+#ifndef BTM_AFTER_RESET_TIMEOUT
+#define BTM_AFTER_RESET_TIMEOUT 0
+#endif
+
+/* The default class of device. */
+#ifndef BTM_INIT_CLASS_OF_DEVICE
+#define BTM_INIT_CLASS_OF_DEVICE "\x00\x1F\x00"
+#endif
+
+/* The number of SCO links. */
+#ifndef BTM_MAX_SCO_LINKS
+#define BTM_MAX_SCO_LINKS 3
+#endif
+
+/* The preferred type of SCO links (2-eSCO, 0-SCO). */
+#ifndef BTM_DEFAULT_SCO_MODE
+#define BTM_DEFAULT_SCO_MODE 2
+#endif
+
+/* The number of security records for peer devices. */
+#ifndef BTM_SEC_MAX_DEVICE_RECORDS
+#define BTM_SEC_MAX_DEVICE_RECORDS 8
+#endif
+
+/* The number of security records for services. */
+#ifndef BTM_SEC_MAX_SERVICE_RECORDS
+#define BTM_SEC_MAX_SERVICE_RECORDS 24
+#endif
+
+/* If True, force a retrieval of remote device name for each bond in case it's changed */
+#ifndef BTM_SEC_FORCE_RNR_FOR_DBOND
+#define BTM_SEC_FORCE_RNR_FOR_DBOND TRUE
+#endif
+
+/* Maximum device name length used in btm database. */
+#ifndef BTM_MAX_REM_BD_NAME_LEN
+#define BTM_MAX_REM_BD_NAME_LEN 20
+#endif
+
+/* Maximum local device name length stored btm database.
+ '0' disables storage of the local name in BTM */
+#ifndef BTM_MAX_LOC_BD_NAME_LEN
+#define BTM_MAX_LOC_BD_NAME_LEN 31
+#endif
+
+/* TRUE if default string is used, FALSE if device name is set in the application */
+#ifndef BTM_USE_DEF_LOCAL_NAME
+#define BTM_USE_DEF_LOCAL_NAME FALSE
+#endif
+
+/* Fixed Default String (Ignored if BTM_USE_DEF_LOCAL_NAME is FALSE) */
+#ifndef BTM_DEF_LOCAL_NAME
+#define BTM_DEF_LOCAL_NAME ""
+#endif
+
+/* Maximum service name stored with security authorization (0 if not needed) */
+#ifndef BTM_SEC_SERVICE_NAME_LEN
+#define BTM_SEC_SERVICE_NAME_LEN BT_MAX_SERVICE_NAME_LEN
+#endif
+
+/* Maximum number of pending security callback */
+#ifndef BTM_SEC_MAX_CALLBACKS
+#define BTM_SEC_MAX_CALLBACKS 7
+#endif
+
+/* Maximum length of the service name. */
+#ifndef BT_MAX_SERVICE_NAME_LEN
+#define BT_MAX_SERVICE_NAME_LEN 21
+#endif
+
+/* ACL buffer size in HCI Host Buffer Size command. */
+#ifndef BTM_ACL_BUF_SIZE
+#define BTM_ACL_BUF_SIZE 0
+#endif
+
+/* This is set to use the BTM power manager. */
+#ifndef BTM_PWR_MGR_INCLUDED
+#define BTM_PWR_MGR_INCLUDED TRUE
+#endif
+
+/* The maximum number of clients that can register with the power manager. */
+#ifndef BTM_MAX_PM_RECORDS
+#define BTM_MAX_PM_RECORDS 2
+#endif
+
+/* This is set to show debug trace messages for the power manager. */
+#ifndef BTM_PM_DEBUG
+#define BTM_PM_DEBUG FALSE
+#endif
+
+/* This is set to TRUE if link is to be unparked due to BTM_CreateSCO API. */
+#ifndef BTM_SCO_WAKE_PARKED_LINK
+#define BTM_SCO_WAKE_PARKED_LINK TRUE
+#endif
+
+/* May be set to the the name of a function used for vendor specific chip initialization */
+#ifndef BTM_APP_DEV_INIT
+/* #define BTM_APP_DEV_INIT myInitFunction() */
+#endif
+
+/* This is set to TRUE if the busy level change event is desired. (replace ACL change event) */
+#ifndef BTM_BUSY_LEVEL_CHANGE_INCLUDED
+#define BTM_BUSY_LEVEL_CHANGE_INCLUDED TRUE
+#endif
+
+/* If the user does not respond to security process requests within this many seconds,
+ * a negative response would be sent automatically.
+ * It's recommended to use a value between 30 and OBX_TIMEOUT_VALUE
+ * 30 is LMP response timeout value */
+#ifndef BTM_SEC_TIMEOUT_VALUE
+#define BTM_SEC_TIMEOUT_VALUE 35
+#endif
+
+/* Maximum number of callbacks that can be registered using BTM_RegisterForVSEvents */
+#ifndef BTM_MAX_VSE_CALLBACKS
+#define BTM_MAX_VSE_CALLBACKS 3
+#endif
+
+/* Number of streams for dual stack */
+#ifndef BTM_SYNC_INFO_NUM_STR
+#define BTM_SYNC_INFO_NUM_STR 2
+#endif
+
+/* Number of streams for dual stack in BT Controller */
+#ifndef BTM_SYNC_INFO_NUM_STR_BTC
+#define BTM_SYNC_INFO_NUM_STR_BTC 2
+#endif
+
+/******************************************
+** Lisbon Features
+*******************************************/
+/* This is set to TRUE if the server Extended Inquiry Response feature is desired. */
+/* server sends EIR to client */
+#ifndef BTM_EIR_SERVER_INCLUDED
+#define BTM_EIR_SERVER_INCLUDED TRUE
+#endif
+
+/* This is set to TRUE if the client Extended Inquiry Response feature is desired. */
+/* client inquiry to server */
+#ifndef BTM_EIR_CLIENT_INCLUDED
+#define BTM_EIR_CLIENT_INCLUDED TRUE
+#endif
+
+/* This is set to TRUE if the FEC is required for EIR packet. */
+#ifndef BTM_EIR_DEFAULT_FEC_REQUIRED
+#define BTM_EIR_DEFAULT_FEC_REQUIRED TRUE
+#endif
+
+/* User defined UUID look up table */
+#ifndef BTM_EIR_UUID_LKUP_TBL
+#endif
+
+/* The IO capability of the local device (for Simple Pairing) */
+#ifndef BTM_LOCAL_IO_CAPS
+#define BTM_LOCAL_IO_CAPS BTM_IO_CAP_IO
+#endif
+
+/* The default MITM Protection Requirement (for Simple Pairing)
+ * Possible values are BTM_AUTH_SP_YES or BTM_AUTH_SP_NO */
+#ifndef BTM_DEFAULT_AUTH_REQ
+#define BTM_DEFAULT_AUTH_REQ BTM_AUTH_SP_NO
+#endif
+
+/* The default MITM Protection Requirement for dedicated bonding using Simple Pairing
+ * Possible values are BTM_AUTH_AP_YES or BTM_AUTH_AP_NO */
+#ifndef BTM_DEFAULT_DD_AUTH_REQ
+#define BTM_DEFAULT_DD_AUTH_REQ BTM_AUTH_AP_YES
+#endif
+
+/* Include Out-of-Band implementation for Simple Pairing */
+#ifndef BTM_OOB_INCLUDED
+#define BTM_OOB_INCLUDED TRUE
+#endif
+
+/* TRUE to include Sniff Subrating */
+#ifndef BTM_SSR_INCLUDED
+#define BTM_SSR_INCLUDED TRUE
+#endif
+
+/*************************
+** End of Lisbon Features
+**************************/
+
+/* Used for conformance testing ONLY */
+#ifndef BTM_BLE_CONFORMANCE_TESTING
+#define BTM_BLE_CONFORMANCE_TESTING FALSE
+#endif
+
+
+/******************************************************************************
+**
+** L2CAP
+**
+******************************************************************************/
+
+/* Flow control and retransmission mode */
+
+#ifndef L2CAP_FCR_INCLUDED
+#define L2CAP_FCR_INCLUDED FALSE
+#endif
+
+/* The maximum number of simultaneous links that L2CAP can support. */
+#ifndef MAX_L2CAP_LINKS
+#define MAX_L2CAP_LINKS 4
+#endif
+
+/* The maximum number of simultaneous channels that L2CAP can support. */
+#ifndef MAX_L2CAP_CHANNELS
+#define MAX_L2CAP_CHANNELS 10
+#endif
+
+/* The maximum number of simultaneous applications that can register with L2CAP. */
+#ifndef MAX_L2CAP_CLIENTS
+#define MAX_L2CAP_CLIENTS 8
+#endif
+
+/* The number of seconds of link inactivity before a link is disconnected. */
+#ifndef L2CAP_LINK_INACTIVITY_TOUT
+#define L2CAP_LINK_INACTIVITY_TOUT 3
+#endif
+
+/* The number of seconds of link inactivity after bonding before a link is disconnected. */
+#ifndef L2CAP_BONDING_TIMEOUT
+#define L2CAP_BONDING_TIMEOUT 3
+#endif
+
+/* The time from the HCI connection complete to disconnect if no channel is established. */
+#ifndef L2CAP_LINK_STARTUP_TOUT
+#define L2CAP_LINK_STARTUP_TOUT 60
+#endif
+
+/* The L2CAP MTU; must be in accord with the HCI ACL pool size. */
+#ifndef L2CAP_MTU_SIZE
+#define L2CAP_MTU_SIZE 1691
+#endif
+
+/* The L2CAP MPS over Bluetooth; must be in accord with the FCR tx pool size and ACL down buffer size. */
+#ifndef L2CAP_MPS_OVER_BR_EDR
+#define L2CAP_MPS_OVER_BR_EDR 1010
+#endif
+
+/* The L2CAP MPS over AMP; must be in accord with the FCR tx pool size and ACL down buffer size. */
+#ifndef L2CAP_MPS_OVER_AMP
+#define L2CAP_MPS_OVER_AMP 1480
+#endif
+
+/* This is set to enable host flow control. */
+#ifndef L2CAP_HOST_FLOW_CTRL
+#define L2CAP_HOST_FLOW_CTRL FALSE
+#endif
+
+/* If host flow control enabled, this is the number of buffers the controller can have unacknowledged. */
+#ifndef L2CAP_HOST_FC_ACL_BUFS
+#define L2CAP_HOST_FC_ACL_BUFS 20
+#endif
+
+/* The percentage of the queue size allowed before a congestion event is sent to the L2CAP client (typically 120%). */
+#ifndef L2CAP_FWD_CONG_THRESH
+#define L2CAP_FWD_CONG_THRESH 120
+#endif
+
+/* This is set to enable L2CAP to take the ACL link out of park mode when ACL data is to be sent. */
+#ifndef L2CAP_WAKE_PARKED_LINK
+#define L2CAP_WAKE_PARKED_LINK TRUE
+#endif
+
+/* Whether link wants to be the master or the slave. */
+#ifndef L2CAP_DESIRED_LINK_ROLE
+#define L2CAP_DESIRED_LINK_ROLE HCI_ROLE_SLAVE
+#endif
+
+/* Include Non-Flushable Packet Boundary Flag feature of Lisbon */
+#ifndef L2CAP_NON_FLUSHABLE_PB_INCLUDED
+#define L2CAP_NON_FLUSHABLE_PB_INCLUDED TRUE
+#endif
+
+/* max queued Multi-AV packets per link including controller */
+#ifndef L2CAP_MULTI_AV_TOTAL_QUEUED_BUF
+#define L2CAP_MULTI_AV_TOTAL_QUEUED_BUF 6
+#endif
+
+/* max links supported by Multi-AV feature */
+#ifndef L2CAP_MAX_MULTI_AV_CID
+#define L2CAP_MAX_MULTI_AV_CID 5
+#endif
+
+/* Minimum number of ACL credit for high priority link */
+#ifndef L2CAP_HIGH_PRI_MIN_XMIT_QUOTA
+#define L2CAP_HIGH_PRI_MIN_XMIT_QUOTA 4
+#endif
+
+/* used for monitoring HCI ACL credit management */
+#ifndef L2CAP_HCI_FLOW_CONTROL_DEBUG
+#define L2CAP_HCI_FLOW_CONTROL_DEBUG TRUE
+#endif
+
+/* Used for calculating transmit buffers off of */
+#ifndef L2CAP_NUM_XMIT_BUFFS
+#define L2CAP_NUM_XMIT_BUFFS HCI_ACL_BUF_MAX
+#endif
+
+/* Unicast Connectionless Data */
+#ifndef L2CAP_UCD_INCLUDED
+#define L2CAP_UCD_INCLUDED FALSE
+#endif
+
+/* Unicast Connectionless Data MTU */
+#ifndef L2CAP_UCD_MTU
+#define L2CAP_UCD_MTU L2CAP_MTU_SIZE
+#endif
+
+/* Unicast Connectionless Data Idle Timeout */
+#ifndef L2CAP_UCD_IDLE_TIMEOUT
+#define L2CAP_UCD_IDLE_TIMEOUT 2
+#endif
+
+/* Unicast Connectionless Data Idle Timeout */
+#ifndef L2CAP_UCD_CH_PRIORITY
+#define L2CAP_UCD_CH_PRIORITY L2CAP_CHNL_PRIORITY_MEDIUM
+#endif
+
+/* Max clients on Unicast Connectionless Data */
+#ifndef L2CAP_MAX_UCD_CLIENTS
+#define L2CAP_MAX_UCD_CLIENTS 5
+#endif
+
+/* Used for features using fixed channels; set to zero if no fixed channels supported (AMP, BLE, etc.) */
+/* Excluding L2CAP signaling channel and UCD */
+#ifndef L2CAP_NUM_FIXED_CHNLS
+#define L2CAP_NUM_FIXED_CHNLS 4
+#endif
+
+/* First fixed channel supported; 3 if AMP supported */
+#ifndef L2CAP_FIRST_FIXED_CHNL
+#define L2CAP_FIRST_FIXED_CHNL 3
+#endif
+
+#ifndef L2CAP_LAST_FIXED_CHNL
+#define L2CAP_LAST_FIXED_CHNL (L2CAP_FIRST_FIXED_CHNL + L2CAP_NUM_FIXED_CHNLS - 1)
+#endif
+
+/* Round Robin service channels in link */
+#ifndef L2CAP_ROUND_ROBIN_CHANNEL_SERVICE
+#define L2CAP_ROUND_ROBIN_CHANNEL_SERVICE TRUE
+#endif
+
+/* Reconfig after move channel between BR/EDR and AMP */
+#ifndef L2CAP_MOVE_CH_RECONFIG_INCLUDED
+#define L2CAP_MOVE_CH_RECONFIG_INCLUDED FALSE
+#endif
+
+/* Initiate reconfig after move channel between BR/EDR and AMP */
+#ifndef L2CAP_MOVE_CH_RECONFIG_INTITIATOR
+#define L2CAP_MOVE_CH_RECONFIG_INTITIATOR FALSE
+#endif
+
+/* Adjust our monitor timeout in ms plus peer's processing time on class 2 AMP controller */
+#ifndef L2CAP_AMP_ADJUST_MONITOR_TOUT
+#define L2CAP_AMP_ADJUST_MONITOR_TOUT 500
+#endif
+
+/* Adjust our retrans timeout in ms plus peer's processing time on class 2 AMP controller */
+#ifndef L2CAP_AMP_ADJUST_RETRANS_TOUT
+#define L2CAP_AMP_ADJUST_RETRANS_TOUT 500
+#endif
+
+/* Default local device's processing time (ms) */
+#ifndef L2CAP_AMP_PROCESSING_TIME
+#define L2CAP_AMP_PROCESSING_TIME 500
+#endif
+
+/* Used for calculating transmit buffers off of */
+#ifndef L2CAP_NUM_XMIT_BUFFS
+#define L2CAP_NUM_XMIT_BUFFS HCI_ACL_BUF_MAX
+#endif
+
+/* Used for features using fixed channels; set to zero if no fixed channels supported (AMP, BLE, etc.) */
+#ifndef L2CAP_NUM_FIXED_CHNLS
+#define L2CAP_NUM_FIXED_CHNLS 1
+#endif
+
+/* First fixed channel supported; 3 if AMP supported */
+#ifndef L2CAP_FIRST_FIXED_CHNL
+#define L2CAP_FIRST_FIXED_CHNL 3
+#endif
+
+#ifndef L2CAP_LAST_FIXED_CHNL
+#define L2CAP_LAST_FIXED_CHNL (L2CAP_FIRST_FIXED_CHNL + L2CAP_NUM_FIXED_CHNLS - 1)
+#endif
+
+/* used for monitoring eL2CAP data flow */
+#ifndef L2CAP_ERTM_STATS
+#define L2CAP_ERTM_STATS FALSE
+#endif
+
+/* USED FOR FCR TEST ONLY: When TRUE generates bad tx and rx packets */
+#ifndef L2CAP_CORRUPT_ERTM_PKTS
+#define L2CAP_CORRUPT_ERTM_PKTS FALSE
+#endif
+
+/* Used for conformance testing ONLY: When TRUE lets scriptwrapper overwrite info response */
+#ifndef L2CAP_CONFORMANCE_TESTING
+#define L2CAP_CONFORMANCE_TESTING FALSE
+#endif
+
+/******************************************************************************
+**
+** AMP
+**
+******************************************************************************/
+
+#ifndef AMP_INCLUDED
+#define AMP_INCLUDED FALSE
+#endif
+
+/* TRUE if AMP includes debug functionality. */
+#ifndef AMP_DEBUG
+#define AMP_DEBUG FALSE
+#endif
+
+/* Maximum number of simultaneous remote AMP Hosts in system */
+#ifndef AMP_MAX_REMOTE_HOSTS
+#define AMP_MAX_REMOTE_HOSTS MAX_L2CAP_LINKS
+#endif
+
+/* Maximum number of simultaneous remote AMP controllers in system (BR/EDR excluded) */
+#ifndef AMP_MAX_REMOTE_CTRLS
+#define AMP_MAX_REMOTE_CTRLS 2
+#endif
+
+/* Maximum number of UUIDs per remote AMP host */
+#ifndef AMP_MAX_UUIDS_PER_REM_HOST
+#define AMP_MAX_UUIDS_PER_REM_HOST 4
+#endif
+
+/* Maximum number of simultaneous local AMP controllers in system (BR/EDR excluded) */
+#ifndef AMP_MAX_LOCAL_CTRLS
+#define AMP_MAX_LOCAL_CTRLS 1
+#endif
+
+/* Maximum number of simultaneous Physical Links in system */
+#ifndef AMP_MAX_PHYS_LINKS
+#define AMP_MAX_PHYS_LINKS 1
+#endif
+
+/* The maximum number of simultaneous AMP logical links that L2CAP can support. */
+#ifndef AMP_MAX_L2C_LOG_LINKS
+#define AMP_MAX_L2C_LOG_LINKS (MAX_L2CAP_LINKS * 2)
+#endif
+
+/* The number of seconds of link inactivity on AMP fixed channel before the ACL is disconnected. */
+#ifndef AMP_L2C_INACTIVITY_TIMER
+#define AMP_L2C_INACTIVITY_TIMER 7
+#endif
+
+#ifndef AMP_NUM_ALWAYS_PRESENT_LOC_CTRLRS
+#define AMP_NUM_ALWAYS_PRESENT_LOC_CTRLRS AMP_MAX_LOCAL_CTRLS
+#endif
+
+/* If this is non-zero value then l2cap overwrites total ACL credit on AMP. */
+/* This temporarily needs until number in dhd driver is finalized */
+#ifndef AMP_TOTAL_NUM_BLOCKS
+#define AMP_TOTAL_NUM_BLOCKS 0
+#endif
+
+/****************************
+** AMP Autoswitch Constants
+*****************************/
+/* AMP physical link inactivity timeout
+** This is started when the last logical channel got disconnected */
+#ifndef AMP_PHYS_LINK_INACT_DISC_TOUT
+#define AMP_PHYS_LINK_INACT_DISC_TOUT 20
+#endif
+
+/* interval between the moments to check if auto-switch ready connections
+** on this AMP controller have to be moved to BR/EDR and if yes - to
+** start to move the connections */
+#ifndef AMP_AS_TOUT_ON_AMP
+#define AMP_AS_TOUT_ON_AMP 1
+#endif
+
+/* on timeout all auto-switch ready connections
+** have to be moved from BR/EDR to AMP */
+#ifndef AMP_AS_TOUT_ON_BR_EDR
+#define AMP_AS_TOUT_ON_BR_EDR 1
+#endif
+
+/* min time to stay on BR/EDR after auto-switch from AMP
+** (during this time conditions to switch from BR/EDR to
+** AMP are ignored) */
+#ifndef AMP_AS_TOUT_NO_MOVE_TO_AMP
+#define AMP_AS_TOUT_NO_MOVE_TO_AMP 4
+#endif
+
+/* TRUE means that "tout to check throughput on BR/EDR"
+** is restarted after "no move to AMP" timer expires,
+** i.e. move from BR/EDR will start not earlier than
+** AMP_AS_TOUT_NO_MOVE_TO_AMP + AMP_AS_TOUT_ON_BR_EDR
+** FALSE means that "tout no move to AMP" and "tout
+** to check throughput on BR/EDR" run in parallel, i.e.
+** connections can be moved from BR/EDR any moment after
+** "tout no move to AMP" expires. */
+#ifndef AMP_AS_TOUT_ON_BR_EDR_AFTER_NO_MOVE_TO_AMP
+#define AMP_AS_TOUT_ON_BR_EDR_AFTER_NO_MOVE_TO_AMP TRUE
+#endif
+
+/* Until the number of packets sent to L2CAP is <= than this
+** value preparations for auto-switch BR/EDR->AMP do not start.
+** If the number of packets sent to L2CAP falls to this
+** value preparations for auto-switch BR/EDR->AMP stop. */
+#ifndef AMP_AS_THRESHOLD_ON_BR_EDR
+#define AMP_AS_THRESHOLD_ON_BR_EDR 3
+#endif
+
+/* the number of counters used to collect throughput data
+** on AMP controller. Check for auto-switch conditions starts
+** AMP_AMP_AS_COUNT_ARRAY_SIZE * AMP_AS_TOUT_ON_AMP
+** sec after the first auto-switch ready connection is moved
+** to this controller */
+#ifndef AMP_AMP_AS_COUNT_ARRAY_SIZE
+#define AMP_AMP_AS_COUNT_ARRAY_SIZE 10
+#endif
+
+/* meaning: flow spec modify is never sent to controller
+** best effort logical link is created with all
+** parameters sent to unknown...*/
+#ifndef AMP_SIMPLISTIC_AGGREGATION
+#define AMP_SIMPLISTIC_AGGREGATION TRUE
+#endif
+
+/* meaning: auto-switch ready connections start move
+** BR/EDR->AMP after throughput to remote host passes
+** some threshold in bytes (as opposite to move that
+** starts if during some time the number of UNACKED
+** L2CAP packets to remote host stays bigger than some
+** threshold) */
+#ifndef AMP_AUTO_SW_TO_AMP_BY_THROUGHPUT
+#define AMP_AUTO_SW_TO_AMP_BY_THROUGHPUT TRUE
+#endif
+
+/* the number of counters used to collect throughput data
+** on BR/EDR controller. Check for auto-switch conditions starts
+** AMP_BR_EDR_AS_COUNT_ARRAY_SIZE * AMP_AS_TOUT_ON_BR_EDR
+** sec after the first auto-switch ready connection is moved
+** to this controller */
+#ifndef AMP_BR_EDR_AS_COUNT_ARRAY_SIZE
+#define AMP_BR_EDR_AS_COUNT_ARRAY_SIZE 7
+#endif
+
+/* if it takes more than this amount of time to transfer object on BR/EDR
+** application(BTA) will initiate to AMP connection. */
+#ifndef AMP_AS_TRANSFER_TIME_ON_BR_EDR
+#define AMP_AS_TRANSFER_TIME_ON_BR_EDR 5
+#endif
+
+
+#ifndef AMP_RFC_TEST
+#define AMP_RFC_TEST FALSE
+#endif
+
+#ifndef TIMER_PARAM_TYPE
+#ifdef WIN2000
+#define TIMER_PARAM_TYPE void *
+#else
+#define TIMER_PARAM_TYPE UINT32
+#endif
+#endif
+
+/******************************************************************************
+**
+** BLE
+**
+******************************************************************************/
+
+#ifndef BLE_INCLUDED
+#define BLE_INCLUDED FALSE
+#endif
+
+#ifndef LOCAL_BLE_CONTROLLER_ID
+#define LOCAL_BLE_CONTROLLER_ID (AMP_MAX_LOCAL_CTRLS + 1)
+#endif
+
+/******************************************************************************
+**
+** ATT/GATT Protocol/Profile Settings
+**
+******************************************************************************/
+#ifndef ATT_INCLUDED
+#define ATT_INCLUDED FALSE
+#endif
+
+#ifndef ATT_DEBUG
+#define ATT_DEBUG FALSE
+#endif
+
+#ifndef GATT_SERVER_ENABLED
+#define GATT_SERVER_ENABLED FALSE
+#endif
+
+#ifndef GATT_CLIENT_ENABLED
+#define GATT_CLIENT_ENABLED FALSE
+#endif
+
+#ifndef GATT_MAX_SR_PROFILES
+#define GATT_MAX_SR_PROFILES 32 /* max is 32 */
+#endif
+
+#ifndef GATT_MAX_APPS
+#define GATT_MAX_APPS 10 /* note: 2 apps used internally GATT and GAP */
+#endif
+
+#ifndef GATT_MAX_PHY_CHANNEL
+#define GATT_MAX_PHY_CHANNEL 4
+#endif
+
+/* Used for conformance testing ONLY */
+#ifndef GATT_CONFORMANCE_TESTING
+#define GATT_CONFORMANCE_TESTING FALSE
+#endif
+
+/* number of background connection device allowence, ideally to be the same as WL size
+*/
+#ifndef GATT_MAX_BG_CONN_DEV
+#define GATT_MAX_BG_CONN_DEV 32
+#endif
+
+/******************************************************************************
+**
+** SMP
+**
+******************************************************************************/
+#ifndef SMP_INCLUDED
+#define SMP_INCLUDED FALSE
+#endif
+
+#ifndef SMP_DEBUG
+#define SMP_DEBUG FALSE
+#endif
+
+#ifndef SMP_DEFAULT_AUTH_REQ
+#define SMP_DEFAULT_AUTH_REQ SMP_AUTH_NB_ENC_ONLY
+#endif
+
+#ifndef SMP_MAX_ENC_KEY_SIZE
+#define SMP_MAX_ENC_KEY_SIZE 16
+#endif
+
+#ifndef SMP_MIN_ENC_KEY_SIZE
+#define SMP_MIN_ENC_KEY_SIZE 7
+#endif
+
+/* Used for conformance testing ONLY */
+#ifndef SMP_CONFORMANCE_TESTING
+#define SMP_CONFORMANCE_TESTING FALSE
+#endif
+
+/******************************************************************************
+**
+** SDP
+**
+******************************************************************************/
+
+/* This is set to enable SDP server functionality. */
+#ifndef SDP_SERVER_ENABLED
+#define SDP_SERVER_ENABLED TRUE
+#endif
+
+/* The maximum number of SDP records the server can support. */
+#ifndef SDP_MAX_RECORDS
+#define SDP_MAX_RECORDS 20
+#endif
+
+/* The maximum number of attributes in each record. */
+#ifndef SDP_MAX_REC_ATTR
+#if defined(HID_DEV_INCLUDED) && (HID_DEV_INCLUDED==TRUE)
+#define SDP_MAX_REC_ATTR 25
+#else
+#define SDP_MAX_REC_ATTR 13
+#endif
+#endif
+
+#ifndef SDP_MAX_PAD_LEN
+#define SDP_MAX_PAD_LEN 350
+#endif
+
+/* The maximum length, in bytes, of an attribute. */
+#ifndef SDP_MAX_ATTR_LEN
+#if defined(HID_DEV_INCLUDED) && (HID_DEV_INCLUDED==TRUE)
+#define SDP_MAX_ATTR_LEN 80
+#else
+#define SDP_MAX_ATTR_LEN 100
+#endif
+#endif
+
+/* The maximum number of attribute filters supported by SDP databases. */
+#ifndef SDP_MAX_ATTR_FILTERS
+#define SDP_MAX_ATTR_FILTERS 12
+#endif
+
+/* The maximum number of UUID filters supported by SDP databases. */
+#ifndef SDP_MAX_UUID_FILTERS
+#define SDP_MAX_UUID_FILTERS 3
+#endif
+
+/* This is set to enable SDP client functionality. */
+#ifndef SDP_CLIENT_ENABLED
+#define SDP_CLIENT_ENABLED TRUE
+#endif
+
+/* The maximum number of record handles retrieved in a search. */
+#ifndef SDP_MAX_DISC_SERVER_RECS
+#define SDP_MAX_DISC_SERVER_RECS 21
+#endif
+
+/* The size of a scratchpad buffer, in bytes, for storing the response to an attribute request. */
+#ifndef SDP_MAX_LIST_BYTE_COUNT
+#define SDP_MAX_LIST_BYTE_COUNT 1000
+#endif
+
+/* The maximum number of parameters in an SDP protocol element. */
+#ifndef SDP_MAX_PROTOCOL_PARAMS
+#define SDP_MAX_PROTOCOL_PARAMS 2
+#endif
+
+/* The maximum number of simultaneous client and server connections. */
+#ifndef SDP_MAX_CONNECTIONS
+#define SDP_MAX_CONNECTIONS 4
+#endif
+
+/* The MTU size for the L2CAP configuration. */
+#ifndef SDP_MTU_SIZE
+#define SDP_MTU_SIZE 256
+#endif
+
+/* The flush timeout for the L2CAP configuration. */
+#ifndef SDP_FLUSH_TO
+#define SDP_FLUSH_TO 0xFFFF
+#endif
+
+/* The name for security authorization. */
+#ifndef SDP_SERVICE_NAME
+#define SDP_SERVICE_NAME "Service Discovery"
+#endif
+
+/* The security level for BTM. */
+#ifndef SDP_SECURITY_LEVEL
+#define SDP_SECURITY_LEVEL BTM_SEC_NONE
+#endif
+
+/* Device identification feature. */
+#ifndef SDP_DI_INCLUDED
+#define SDP_DI_INCLUDED FALSE
+#endif
+
+/******************************************************************************
+**
+** RFCOMM
+**
+******************************************************************************/
+
+#ifndef RFCOMM_INCLUDED
+#define RFCOMM_INCLUDED FALSE
+#endif
+
+/* The maximum number of ports supported. */
+#ifndef MAX_RFC_PORTS
+#define MAX_RFC_PORTS 5
+#endif
+
+/* The maximum simultaneous links to different devices. */
+#ifndef MAX_BD_CONNECTIONS
+#define MAX_BD_CONNECTIONS 1
+#endif
+
+/* The port receive queue low watermark level, in bytes. */
+#ifndef PORT_RX_LOW_WM
+#define PORT_RX_LOW_WM 5000
+#endif
+
+/* The port receive queue high watermark level, in bytes. */
+#ifndef PORT_RX_HIGH_WM
+#define PORT_RX_HIGH_WM 8000
+#endif
+
+/* The port receive queue critical watermark level, in bytes. */
+#ifndef PORT_RX_CRITICAL_WM
+#define PORT_RX_CRITICAL_WM 12000
+#endif
+
+/* The port receive queue low watermark level, in number of buffers. */
+#ifndef PORT_RX_BUF_LOW_WM
+#define PORT_RX_BUF_LOW_WM 8
+#endif
+
+/* The port receive queue high watermark level, in number of buffers. */
+#ifndef PORT_RX_BUF_HIGH_WM
+#define PORT_RX_BUF_HIGH_WM 16
+#endif
+
+/* The port receive queue critical watermark level, in number of buffers. */
+#ifndef PORT_RX_BUF_CRITICAL_WM
+#define PORT_RX_BUF_CRITICAL_WM 22
+#endif
+
+/* The port transmit queue high watermark level, in bytes. */
+#ifndef PORT_TX_HIGH_WM
+#define PORT_TX_HIGH_WM 8000
+#endif
+
+/* The port transmit queue critical watermark level, in bytes. */
+#ifndef PORT_TX_CRITICAL_WM
+#define PORT_TX_CRITICAL_WM 10000
+#endif
+
+/* The port transmit queue high watermark level, in number of buffers. */
+#ifndef PORT_TX_BUF_HIGH_WM
+#define PORT_TX_BUF_HIGH_WM 16
+#endif
+
+/* The port transmit queue high watermark level, in number of buffers. */
+#ifndef PORT_TX_BUF_CRITICAL_WM
+#define PORT_TX_BUF_CRITICAL_WM 22
+#endif
+
+/* The RFCOMM multiplexer preferred flow control mechanism. */
+#ifndef PORT_FC_DEFAULT
+#define PORT_FC_DEFAULT PORT_FC_CREDIT
+#endif
+
+/* The maximum number of credits receiver sends to peer when using credit-based flow control. */
+#ifndef PORT_CREDIT_RX_MAX
+#define PORT_CREDIT_RX_MAX 16
+#endif
+
+/* The credit low watermark level. */
+#ifndef PORT_CREDIT_RX_LOW
+#define PORT_CREDIT_RX_LOW 8
+#endif
+
+/* Test code allowing l2cap FEC on RFCOMM.*/
+#ifndef PORT_ENABLE_L2CAP_FCR_TEST
+#define PORT_ENABLE_L2CAP_FCR_TEST FALSE
+#endif
+
+/* if application like BTA, Java or script test engine is running on other than BTU thread, */
+/* PORT_SCHEDULE_LOCK shall be defined as GKI_sched_lock() or GKI_disable() */
+#ifndef PORT_SCHEDULE_LOCK
+#define PORT_SCHEDULE_LOCK GKI_disable()
+#endif
+
+/* if application like BTA, Java or script test engine is running on other than BTU thread, */
+/* PORT_SCHEDULE_LOCK shall be defined as GKI_sched_unlock() or GKI_enable() */
+#ifndef PORT_SCHEDULE_UNLOCK
+#define PORT_SCHEDULE_UNLOCK GKI_enable()
+#endif
+
+/******************************************************************************
+**
+** TCS
+**
+******************************************************************************/
+
+#ifndef TCS_INCLUDED
+#define TCS_INCLUDED FALSE
+#endif
+
+/* If set to TRUE, gives lean TCS state machine configuration. */
+#ifndef TCS_LEAN
+#define TCS_LEAN FALSE
+#endif
+
+/* To include/exclude point-to-multipoint broadcast SETUP configuration. */
+#ifndef TCS_BCST_SETUP_INCLUDED
+#define TCS_BCST_SETUP_INCLUDED TRUE
+#endif
+
+/* To include/exclude supplementary services. */
+#ifndef TCS_SUPP_SVCS_INCLUDED
+#define TCS_SUPP_SVCS_INCLUDED TRUE
+#endif
+
+/* To include/exclude WUG master role. */
+#ifndef TCS_WUG_MASTER_INCLUDED
+#define TCS_WUG_MASTER_INCLUDED TRUE
+#endif
+
+/* To include/exclude WUG member role. */
+#ifndef TCS_WUG_MEMBER_INCLUDED
+#define TCS_WUG_MEMBER_INCLUDED TRUE
+#endif
+
+/* Maximum number of WUG members. */
+#ifndef TCS_MAX_WUG_MEMBERS
+#define TCS_MAX_WUG_MEMBERS 7
+#endif
+
+/* Widcomm specific acknowledgement message to ensure fast and robust operation of WUG FIMA procedure. */
+#ifndef TCS_WUG_LISTEN_ACPT_ACK_INCLUDED
+#define TCS_WUG_LISTEN_ACPT_ACK_INCLUDED TRUE
+#endif
+
+/* The number of simultaneous calls supported. */
+#ifndef TCS_MAX_NUM_SIMUL_CALLS
+#define TCS_MAX_NUM_SIMUL_CALLS 3
+#endif
+
+/* The number of devices the device can connect to. */
+#ifndef TCS_MAX_NUM_ACL_CONNS
+#define TCS_MAX_NUM_ACL_CONNS 7
+#endif
+
+/* The maximum length, in bytes, of the company specific information element. */
+#ifndef TCS_MAX_CO_SPEC_LEN
+#define TCS_MAX_CO_SPEC_LEN 40
+#endif
+
+/* The maximum length, in bytes, of the audio control information element . */
+#ifndef TCS_MAX_AUDIO_CTL_LEN
+#define TCS_MAX_AUDIO_CTL_LEN 40
+#endif
+
+/* (Dis)allow EDR ESCO */
+#ifndef TCS_AUDIO_USE_ESCO_EDR
+#define TCS_AUDIO_USE_ESCO_EDR FALSE
+#endif
+
+/******************************************************************************
+**
+** OBX
+**
+******************************************************************************/
+#ifndef OBX_INCLUDED
+#define OBX_INCLUDED FALSE
+#endif
+
+#ifndef OBX_CLIENT_INCLUDED
+#define OBX_CLIENT_INCLUDED TRUE
+#endif
+
+#ifndef OBX_SERVER_INCLUDED
+#define OBX_SERVER_INCLUDED TRUE
+#endif
+
+/* TRUE to include OBEX authentication/MD5 code */
+#ifndef OBX_MD5_INCLUDED
+#define OBX_MD5_INCLUDED TRUE
+#endif
+
+/* TRUE to include OBEX authentication/MD5 test code */
+#ifndef OBX_MD5_TEST_INCLUDED
+#define OBX_MD5_TEST_INCLUDED FALSE
+#endif
+
+/* TRUE to include OBEX 1.4 enhancement (including Obex Over L2CAP) */
+#ifndef OBX_14_INCLUDED
+#define OBX_14_INCLUDED FALSE
+#endif
+/* MD5 code is required to use OBEX 1.4 features (Reliable session) */
+#if (OBX_MD5_INCLUDED == FALSE)
+#undef OBX_14_INCLUDED
+#define OBX_14_INCLUDED FALSE
+#endif
+
+/* L2CAP FCR/eRTM mode is required to use OBEX Over L2CAP */
+#if (L2CAP_FCR_INCLUDED == FALSE)
+#undef OBX_14_INCLUDED
+#define OBX_14_INCLUDED FALSE
+#endif
+
+/* The timeout value (in seconds) for reliable sessions to remain in suspend. 0xFFFFFFFF for no timeout event. */
+#ifndef OBX_SESS_TIMEOUT_VALUE
+#define OBX_SESS_TIMEOUT_VALUE 600
+#endif
+
+/* The idle timeout value. 0 for no timeout event. */
+#ifndef OBX_TIMEOUT_VALUE
+#define OBX_TIMEOUT_VALUE 60
+#endif
+
+/* Timeout value used for disconnect */
+#ifndef OBX_DISC_TOUT_VALUE
+#define OBX_DISC_TOUT_VALUE 5
+#endif
+
+/* The maximum number of registered servers. */
+#ifndef OBX_NUM_SERVERS
+#define OBX_NUM_SERVERS 12
+#endif
+
+/* The maximum number of sessions per registered server. */
+#ifndef OBX_MAX_SR_SESSION
+#define OBX_MAX_SR_SESSION 4
+#endif
+
+/* The maximum number of sessions for all registered servers.
+ * (must be equal or bigger than OBX_NUM_SERVERS) */
+#ifndef OBX_NUM_SR_SESSIONS
+#define OBX_NUM_SR_SESSIONS 26
+#endif
+
+/* The maximum number of sessions per registered server.
+ * must be less than MAX_BD_CONNECTIONS */
+#ifndef OBX_MAX_SR_SESSION
+#define OBX_MAX_SR_SESSION 4
+#endif
+
+/* The maximum number of suspended sessions per registered servers. */
+#ifndef OBX_MAX_SUSPEND_SESSIONS
+#define OBX_MAX_SUSPEND_SESSIONS 4
+#endif
+
+/* The maximum number of active clients. */
+#ifndef OBX_NUM_CLIENTS
+#define OBX_NUM_CLIENTS 8
+#endif
+
+/* The maximum length of OBEX target header.*/
+#ifndef OBX_MAX_TARGET_LEN
+#define OBX_MAX_TARGET_LEN 16
+#endif
+
+/* The maximum length of authentication challenge realm.*/
+#ifndef OBX_MAX_REALM_LEN
+#define OBX_MAX_REALM_LEN 30
+#endif
+
+/* The maximum of GKI buffer queued at OBX before flow control L2CAP */
+#ifndef OBX_MAX_RX_QUEUE_COUNT
+#define OBX_MAX_RX_QUEUE_COUNT 3
+#endif
+
+/* This option is application when OBX_14_INCLUDED=TRUE
+ Pool ID where to reassemble the SDU.
+ This Pool will allow buffers to be used that are larger than
+ the L2CAP_MAX_MTU. */
+#ifndef OBX_USER_RX_POOL_ID
+#define OBX_USER_RX_POOL_ID OBX_LRG_DATA_POOL_ID
+#endif
+
+/* This option is application when OBX_14_INCLUDED=TRUE
+ Pool ID where to hold the SDU.
+ This Pool will allow buffers to be used that are larger than
+ the L2CAP_MAX_MTU. */
+#ifndef OBX_USER_TX_POOL_ID
+#define OBX_USER_TX_POOL_ID OBX_LRG_DATA_POOL_ID
+#endif
+
+/* This option is application when OBX_14_INCLUDED=TRUE
+GKI Buffer Pool ID used to hold MPS segments during SDU reassembly
+*/
+#ifndef OBX_FCR_RX_POOL_ID
+#define OBX_FCR_RX_POOL_ID HCI_ACL_POOL_ID
+#endif
+
+/* This option is application when OBX_14_INCLUDED=TRUE
+GKI Buffer Pool ID used to hold MPS segments used in (re)transmissions.
+L2CAP_DEFAULT_ERM_POOL_ID is specified to use the HCI ACL data pool.
+Note: This pool needs to have enough buffers to hold two times the window size negotiated
+ in the L2CA_SetFCROptions (2 * tx_win_size) to allow for retransmissions.
+ The size of each buffer must be able to hold the maximum MPS segment size passed in
+ L2CA_SetFCROptions plus BT_HDR (8) + HCI preamble (4) + L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec).
+*/
+#ifndef OBX_FCR_TX_POOL_ID
+#define OBX_FCR_TX_POOL_ID HCI_ACL_POOL_ID
+#endif
+
+/* This option is application when OBX_14_INCLUDED=TRUE
+Size of the transmission window when using enhanced retransmission mode. Not used
+in basic and streaming modes. Range: 1 - 63
+This is used when AMP_INCLUDED == FALSE
+*/
+#ifndef OBX_FCR_OPT_TX_WINDOW_SIZE_BR_EDR
+#define OBX_FCR_OPT_TX_WINDOW_SIZE_BR_EDR 20
+#endif
+
+/* This option is application when OBX_14_INCLUDED=TRUE
+Size of the transmission window when using enhanced retransmission mode. Not used
+in basic and streaming modes. Range: 1 - 63
+This is used when AMP_INCLUDED == TRUE
+*/
+#ifndef OBX_FCR_OPT_TX_WINDOW_SIZE_AMP
+#define OBX_FCR_OPT_TX_WINDOW_SIZE_AMP 45
+#endif
+
+/* This option is application when OBX_14_INCLUDED=TRUE
+Number of transmission attempts for a single I-Frame before taking
+Down the connection. Used In ERTM mode only. Value is Ignored in basic and
+Streaming modes.
+Range: 0, 1-0xFF
+0 - infinite retransmissions
+1 - single transmission
+*/
+#ifndef OBX_FCR_OPT_MAX_TX_B4_DISCNT
+#define OBX_FCR_OPT_MAX_TX_B4_DISCNT 20
+#endif
+
+/* This option is application when OBX_14_INCLUDED=TRUE
+Retransmission Timeout
+Range: Minimum 2000 (2 secs) on BR/EDR when supporting PBF.
+ */
+#ifndef OBX_FCR_OPT_RETX_TOUT
+#define OBX_FCR_OPT_RETX_TOUT 2000
+#endif
+
+/* This option is application when OBX_14_INCLUDED=TRUE
+Monitor Timeout
+Range: Minimum 12000 (12 secs) on BR/EDR when supporting PBF.
+*/
+#ifndef OBX_FCR_OPT_MONITOR_TOUT
+#define OBX_FCR_OPT_MONITOR_TOUT 12000
+#endif
+
+/******************************************************************************
+**
+** BNEP
+**
+******************************************************************************/
+
+#ifndef BNEP_INCLUDED
+#define BNEP_INCLUDED FALSE
+#endif
+
+/* Protocol filtering is an optional feature. Bydefault it will be turned on */
+#ifndef BNEP_SUPPORTS_PROT_FILTERS
+#define BNEP_SUPPORTS_PROT_FILTERS TRUE
+#endif
+
+/* Multicast filtering is an optional feature. Bydefault it will be turned on */
+#ifndef BNEP_SUPPORTS_MULTI_FILTERS
+#define BNEP_SUPPORTS_MULTI_FILTERS TRUE
+#endif
+
+/* BNEP status API call is used mainly to get the L2CAP handle */
+#ifndef BNEP_SUPPORTS_STATUS_API
+#define BNEP_SUPPORTS_STATUS_API TRUE
+#endif
+
+/* This is just a debug function */
+#ifndef BNEP_SUPPORTS_DEBUG_DUMP
+#define BNEP_SUPPORTS_DEBUG_DUMP TRUE
+#endif
+
+#ifndef BNEP_SUPPORTS_ALL_UUID_LENGTHS
+#define BNEP_SUPPORTS_ALL_UUID_LENGTHS TRUE /* Otherwise it will support only 16bit UUIDs */
+#endif
+
+/*
+** When BNEP connection changes roles after the connection is established
+** we will do an authentication check again on the new role
+*/
+#ifndef BNEP_DO_AUTH_FOR_ROLE_SWITCH
+#define BNEP_DO_AUTH_FOR_ROLE_SWITCH TRUE
+#endif
+
+
+/* Maximum number of protocol filters supported. */
+#ifndef BNEP_MAX_PROT_FILTERS
+#define BNEP_MAX_PROT_FILTERS 5
+#endif
+
+/* Maximum number of multicast filters supported. */
+#ifndef BNEP_MAX_MULTI_FILTERS
+#define BNEP_MAX_MULTI_FILTERS 5
+#endif
+
+/* Minimum MTU size. */
+#ifndef BNEP_MIN_MTU_SIZE
+#define BNEP_MIN_MTU_SIZE L2CAP_MTU_SIZE
+#endif
+
+/* Preferred MTU size. */
+#ifndef BNEP_MTU_SIZE
+#define BNEP_MTU_SIZE BNEP_MIN_MTU_SIZE
+#endif
+
+/* Maximum size of user data, in bytes. */
+#ifndef BNEP_MAX_USER_DATA_SIZE
+#define BNEP_MAX_USER_DATA_SIZE 1500
+#endif
+
+/* Maximum number of buffers allowed in transmit data queue. */
+#ifndef BNEP_MAX_XMITQ_DEPTH
+#define BNEP_MAX_XMITQ_DEPTH 20
+#endif
+
+/* Maximum number BNEP of connections supported. */
+#ifndef BNEP_MAX_CONNECTIONS
+#define BNEP_MAX_CONNECTIONS 7
+#endif
+
+
+/******************************************************************************
+**
+** AVDTP
+**
+******************************************************************************/
+
+#ifndef AVDT_INCLUDED
+#define AVDT_INCLUDED FALSE
+#endif
+
+/* Include reporting capability in AVDTP */
+#ifndef AVDT_REPORTING
+#define AVDT_REPORTING TRUE
+#endif
+
+/* Include multiplexing capability in AVDTP */
+#ifndef AVDT_MULTIPLEXING
+#define AVDT_MULTIPLEXING TRUE
+#endif
+
+/* Number of simultaneous links to different peer devices. */
+#ifndef AVDT_NUM_LINKS
+#define AVDT_NUM_LINKS 2
+#endif
+
+/* Number of simultaneous stream endpoints. */
+#ifndef AVDT_NUM_SEPS
+#define AVDT_NUM_SEPS 3
+#endif
+
+/* Number of transport channels setup per media stream(audio or video) */
+#ifndef AVDT_NUM_CHANNELS
+
+#if AVDT_REPORTING == TRUE
+/* signaling, media and reporting channels */
+#define AVDT_NUM_CHANNELS 3
+#else
+/* signaling and media channels */
+#define AVDT_NUM_CHANNELS 2
+#endif
+
+#endif
+
+/* Number of transport channels setup by AVDT for all media streams
+ * AVDT_NUM_CHANNELS * Number of simultaneous streams.
+ */
+#ifndef AVDT_NUM_TC_TBL
+#define AVDT_NUM_TC_TBL 6
+#endif
+
+
+/* Maximum size in bytes of the codec capabilities information element. */
+#ifndef AVDT_CODEC_SIZE
+#define AVDT_CODEC_SIZE 10
+#endif
+
+/* Maximum size in bytes of the content protection information element. */
+#ifndef AVDT_PROTECT_SIZE
+#define AVDT_PROTECT_SIZE 90
+#endif
+
+/* Maximum number of GKI buffers in the fragment queue (for video frames).
+ * Must be less than the number of buffers in the buffer pool of size AVDT_DATA_POOL_SIZE */
+#ifndef AVDT_MAX_FRAG_COUNT
+#define AVDT_MAX_FRAG_COUNT 15
+#endif
+
+/******************************************************************************
+**
+** PAN
+**
+******************************************************************************/
+
+#ifndef PAN_INCLUDED
+#define PAN_INCLUDED FALSE
+#endif
+
+/* This will enable the PANU role */
+#ifndef PAN_SUPPORTS_ROLE_PANU
+#define PAN_SUPPORTS_ROLE_PANU TRUE
+#endif
+
+/* This will enable the GN role */
+#ifndef PAN_SUPPORTS_ROLE_GN
+#define PAN_SUPPORTS_ROLE_GN TRUE
+#endif
+
+/* This will enable the NAP role */
+#ifndef PAN_SUPPORTS_ROLE_NAP
+#define PAN_SUPPORTS_ROLE_NAP TRUE
+#endif
+
+/* This is just for debugging purposes */
+#ifndef PAN_SUPPORTS_DEBUG_DUMP
+#define PAN_SUPPORTS_DEBUG_DUMP TRUE
+#endif
+
+
+/* Maximum number of PAN connections allowed */
+#ifndef MAX_PAN_CONNS
+#define MAX_PAN_CONNS 7
+#endif
+
+/* Default service name for NAP role */
+#ifndef PAN_NAP_DEFAULT_SERVICE_NAME
+#define PAN_NAP_DEFAULT_SERVICE_NAME "Network Access Point Service"
+#endif
+
+/* Default service name for GN role */
+#ifndef PAN_GN_DEFAULT_SERVICE_NAME
+#define PAN_GN_DEFAULT_SERVICE_NAME "Group Network Service"
+#endif
+
+/* Default service name for PANU role */
+#ifndef PAN_PANU_DEFAULT_SERVICE_NAME
+#define PAN_PANU_DEFAULT_SERVICE_NAME "PAN User Service"
+#endif
+
+/* Default description for NAP role service */
+#ifndef PAN_NAP_DEFAULT_DESCRIPTION
+#define PAN_NAP_DEFAULT_DESCRIPTION "Public NAP"
+#endif
+
+/* Default description for GN role service */
+#ifndef PAN_GN_DEFAULT_DESCRIPTION
+#define PAN_GN_DEFAULT_DESCRIPTION "Widcomm GN"
+#endif
+
+/* Default description for PANU role service */
+#ifndef PAN_PANU_DEFAULT_DESCRIPTION
+#define PAN_PANU_DEFAULT_DESCRIPTION "Laptop's PANU"
+#endif
+
+/* Default Security level for PANU role. */
+#ifndef PAN_PANU_SECURITY_LEVEL
+#define PAN_PANU_SECURITY_LEVEL 0
+#endif
+
+/* Default Security level for GN role. */
+#ifndef PAN_GN_SECURITY_LEVEL
+#define PAN_GN_SECURITY_LEVEL 0
+#endif
+
+/* Default Security level for NAP role. */
+#ifndef PAN_NAP_SECURITY_LEVEL
+#define PAN_NAP_SECURITY_LEVEL 0
+#endif
+
+
+
+
+/******************************************************************************
+**
+** GAP
+**
+******************************************************************************/
+
+#ifndef GAP_INCLUDED
+#define GAP_INCLUDED FALSE
+#endif
+
+/* This is set to enable use of GAP L2CAP connections. */
+#ifndef GAP_CONN_INCLUDED
+#define GAP_CONN_INCLUDED TRUE
+#endif
+
+/* This is set to enable posting event for data write */
+#ifndef GAP_CONN_POST_EVT_INCLUDED
+#define GAP_CONN_POST_EVT_INCLUDED FALSE
+#endif
+
+/* The maximum number of simultaneous GAP L2CAP connections. */
+#ifndef GAP_MAX_CONNECTIONS
+#define GAP_MAX_CONNECTIONS 8
+#endif
+
+/******************************************************************************
+**
+** CTP
+**
+******************************************************************************/
+
+#ifndef CTP_INCLUDED
+#define CTP_INCLUDED FALSE
+#endif
+
+/* To include CTP gateway functionality or not. */
+#ifndef CTP_GW_INCLUDED
+#define CTP_GW_INCLUDED TRUE
+#endif
+
+/* The number of terminals supported. */
+#ifndef CTP_MAX_NUM_TLS
+#define CTP_MAX_NUM_TLS 7
+#endif
+
+/* If the controller can not support sniff mode when the SCO is up, set this to FALSE. */
+#ifndef CTP_USE_SNIFF_ON_SCO
+#define CTP_USE_SNIFF_ON_SCO FALSE
+#endif
+
+/* When ACL link between TL and GW is idle for more than this amount of seconds, the ACL may be put to low power mode. */
+#ifndef CTP_TL_IDLE_TIMEOUT
+#define CTP_TL_IDLE_TIMEOUT 90
+#endif
+
+/* To include CTP terminal functionality or not. */
+#ifndef CTP_TL_INCLUDED
+#define CTP_TL_INCLUDED TRUE
+#endif
+
+/* To include CTP device discovery functionality or not. */
+#ifndef CTP_DISCOVERY_INCLUDED
+#define CTP_DISCOVERY_INCLUDED TRUE
+#endif
+
+/* set to TRUE for controllers that do not support multi-point */
+#ifndef CTP_TL_WAIT_DISC
+#define CTP_TL_WAIT_DISC TRUE
+#endif
+
+/* The CTP inquiry database size. */
+#ifndef CTP_INQ_DB_SIZE
+#define CTP_INQ_DB_SIZE CTP_DISC_REC_SIZE
+#endif
+
+/* The CTP discovery record size. */
+#ifndef CTP_DISC_REC_SIZE
+#define CTP_DISC_REC_SIZE 60
+#endif
+
+/* CTP TL would try to re-establish L2CAP channel after channel is disconnected for this amount of seconds. */
+#ifndef CTP_GUARD_LINK_LOST
+#define CTP_GUARD_LINK_LOST 1
+#endif
+
+/* The link policy bitmap. */
+#ifndef CTP_DEFAULT_LINK_POLICY
+#define CTP_DEFAULT_LINK_POLICY 0x000F
+#endif
+
+/* The minimum period interval used for the sniff and park modes. */
+#ifndef CTP_DEF_LOWPWR_MIN_PERIOD
+#define CTP_DEF_LOWPWR_MIN_PERIOD 0x100
+#endif
+
+/* The maximum period interval used for the sniff and park modes. */
+#ifndef CTP_DEF_LOWPWR_MAX_PERIOD
+#define CTP_DEF_LOWPWR_MAX_PERIOD 0x1E0
+#endif
+
+/* The number of baseband receive slot sniff attempts. */
+#ifndef CTP_DEF_LOWPWR_ATTEMPT
+#define CTP_DEF_LOWPWR_ATTEMPT 0x200
+#endif
+
+/* The number of baseband receive slots for sniff timeout. */
+#ifndef CTP_DEF_LOWPWR_TIMEOUT
+#define CTP_DEF_LOWPWR_TIMEOUT 0x200
+#endif
+
+/* This is set if CTP is to use park mode. */
+#ifndef CTP_PARK_INCLUDED
+#define CTP_PARK_INCLUDED TRUE
+#endif
+
+/* This is set if CTP is to use sniff mode. */
+#ifndef CTP_SNIFF_INCLUDED
+#define CTP_SNIFF_INCLUDED TRUE
+#endif
+
+/* To include CTP data exchange functionality or not. */
+#ifndef CTP_DATA_EXCHG_FEATURE
+#define CTP_DATA_EXCHG_FEATURE FALSE
+#endif
+
+/* To include CTP GW intercom functionality or not. */
+#ifndef CTP_GW_INTERCOM_FEATURE
+#define CTP_GW_INTERCOM_FEATURE FALSE
+#endif
+
+/* The MTU size for L2CAP channel. */
+#ifndef CTP_MTU_SIZE
+#define CTP_MTU_SIZE 200
+#endif
+
+/* The L2CAP PSM for the data exchange feature. */
+#ifndef CTP_DATA_EXCHG_PSM
+#define CTP_DATA_EXCHG_PSM 13
+#endif
+
+/* The flush timeout for L2CAP channels. */
+#ifndef CTP_FLUSH_TO
+#define CTP_FLUSH_TO 0xFFFF
+#endif
+
+/* The default service name for CTP. */
+#ifndef CTP_DEFAULT_SERVICE_NAME
+#define CTP_DEFAULT_SERVICE_NAME "Cordless Telephony"
+#endif
+
+/* The CTP security level. */
+#ifndef CTP_SECURITY_LEVEL
+#define CTP_SECURITY_LEVEL (BTM_SEC_IN_AUTHORIZE | BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_ENCRYPT)
+#endif
+
+/* The number of lines to the external network. */
+#ifndef CTP_MAX_LINES
+#define CTP_MAX_LINES 1
+#endif
+
+/* Test if the number of resources in TCS is consistent with CTP setting. */
+#ifndef CTP_TEST_FULL_TCS
+#define CTP_TEST_FULL_TCS TRUE
+#endif
+
+/* The default inquiry mode. */
+#ifndef CTP_DEFAULT_INQUIRY_MODE
+#define CTP_DEFAULT_INQUIRY_MODE BTM_GENERAL_INQUIRY
+#endif
+
+/* The default inquiry duration. */
+#ifndef CTP_DEFAULT_INQ_DURATION
+#define CTP_DEFAULT_INQ_DURATION 4
+#endif
+
+/* The maximum number of inquiry responses. */
+#ifndef CTP_DEFAULT_INQ_MAX_RESP
+#define CTP_DEFAULT_INQ_MAX_RESP 3
+#endif
+
+/* When TL does not create another L2CAP channel within this period of time GW declares that it's "Connected Limited". */
+#ifndef CTP_TL_CONN_TIMEOUT
+#define CTP_TL_CONN_TIMEOUT 5
+#endif
+
+/* The delay for ACL to completely disconnect (for intercom) before sending the connect request to GW. */
+#ifndef CTP_RECONNECT_DELAY
+#define CTP_RECONNECT_DELAY 5
+#endif
+
+/* How many times to retry connection when it has failed. */
+#ifndef CTP_RETRY_ON_CONN_ERR
+#define CTP_RETRY_ON_CONN_ERR 5
+#endif
+
+/******************************************************************************
+**
+** ICP
+**
+******************************************************************************/
+
+#ifndef ICP_INCLUDED
+#define ICP_INCLUDED FALSE
+#endif
+
+/* The ICP default MTU. */
+#ifndef ICP_MTU_SIZE
+#define ICP_MTU_SIZE 100
+#endif
+
+/* The ICP security level. */
+#ifndef ICP_SECURITY_LEVEL
+#define ICP_SECURITY_LEVEL BTM_SEC_NONE
+#endif
+
+/* The default service name for ICP. */
+#ifndef ICP_DEFAULT_SERVICE_NAME
+#define ICP_DEFAULT_SERVICE_NAME "Intercom"
+#endif
+
+/* The flush timeout for L2CAP channels. */
+#ifndef ICP_FLUSH_TO
+#define ICP_FLUSH_TO 0xFFFF
+#endif
+
+/******************************************************************************
+**
+** SPP
+**
+******************************************************************************/
+
+#ifndef SPP_INCLUDED
+#define SPP_INCLUDED FALSE
+#endif
+
+/* The SPP default MTU. */
+#ifndef SPP_DEFAULT_MTU
+#define SPP_DEFAULT_MTU 127
+#endif
+
+/* The interval, in seconds, that a client tries to reconnect to a service. */
+#ifndef SPP_RETRY_CONN_INTERVAL
+#define SPP_RETRY_CONN_INTERVAL 1
+#endif
+
+/* The SPP discoverable mode: limited or general. */
+#ifndef SPP_DISCOVERABLE_MODE
+#define SPP_DISCOVERABLE_MODE BTM_GENERAL_DISCOVERABLE
+#endif
+
+/* The maximum number of inquiry results returned in by inquiry procedure. */
+#ifndef SPP_DEF_INQ_MAX_RESP
+#define SPP_DEF_INQ_MAX_RESP 10
+#endif
+
+/* The SPP discovery record size. */
+#ifndef SPP_DISC_REC_SIZE
+#define SPP_DISC_REC_SIZE 60
+#endif
+
+#ifndef SPP_MAX_RECS_PER_DEVICE
+#define SPP_MAX_RECS_PER_DEVICE (SPP_DB_SIZE / SPP_DISC_REC_SIZE)
+#endif
+
+/* Inquiry duration in 1.28 second units. */
+#ifndef SPP_DEF_INQ_DURATION
+#define SPP_DEF_INQ_DURATION 9
+#endif
+
+/* keep the raw data received from SDP server in database. */
+#ifndef SDP_RAW_DATA_INCLUDED
+#define SDP_RAW_DATA_INCLUDED FALSE
+#endif
+
+/* TRUE, to allow JV to create L2CAP connection on SDP PSM. */
+#ifndef SDP_FOR_JV_INCLUDED
+#define SDP_FOR_JV_INCLUDED FALSE
+#endif
+
+/* Inquiry duration in 1.28 second units. */
+#ifndef SDP_DEBUG
+#define SDP_DEBUG TRUE
+#endif
+
+/******************************************************************************
+**
+** HSP2, HFP
+**
+******************************************************************************/
+
+#ifndef HSP2_INCLUDED
+#define HSP2_INCLUDED FALSE
+#endif
+
+/* Include the ability to perform inquiry for peer devices. */
+#ifndef HSP2_INQUIRY_INCLUDED
+#define HSP2_INQUIRY_INCLUDED TRUE
+#endif
+
+/* Include Audio Gateway specific code. */
+#ifndef HSP2_AG_INCLUDED
+#define HSP2_AG_INCLUDED TRUE
+#endif
+
+/* Include Headset Specific Code. */
+#ifndef HSP2_HS_INCLUDED
+#define HSP2_HS_INCLUDED TRUE
+#endif
+
+/* Include the ability to open an SCO connection for In-Band Ringing. */
+#ifndef HSP2_IB_RING_INCLUDED
+#define HSP2_IB_RING_INCLUDED TRUE
+#endif
+
+/* Include the ability to repeat a ring. */
+#ifndef HSP2_AG_REPEAT_RING
+#define HSP2_AG_REPEAT_RING TRUE
+#endif
+
+#ifndef HSP2_APP_CLOSES_ON_CKPD
+#define HSP2_APP_CLOSES_ON_CKPD FALSE
+#endif
+
+
+/* Include the ability to park a connection. */
+#ifndef HSP2_PARK_INCLUDED
+#define HSP2_PARK_INCLUDED TRUE
+#endif
+
+/* Include HSP State Machine debug trace messages. */
+#ifndef HSP2_FSM_DEBUG
+#define HSP2_FSM_DEBUG TRUE
+#endif
+
+/* The Module's Inquiry Scan Window. */
+#ifndef HSP2_INQ_SCAN_WINDOW
+#define HSP2_INQ_SCAN_WINDOW 0
+#endif
+
+/* The Module's Inquiry Scan Interval. */
+#ifndef HSP2_INQ_SCAN_INTERVAL
+#define HSP2_INQ_SCAN_INTERVAL 0
+#endif
+
+/* The Module's Page Scan Interval. */
+#ifndef HSP2_PAGE_SCAN_INTERVAL
+#define HSP2_PAGE_SCAN_INTERVAL 0
+#endif
+
+/* The Module's Page Scan Window. */
+#ifndef HSP2_PAGE_SCAN_WINDOW
+#define HSP2_PAGE_SCAN_WINDOW 0
+#endif
+
+/* The Park Mode's Minimum Beacon Period. */
+#ifndef HSP2_BEACON_MIN_PERIOD
+#define HSP2_BEACON_MIN_PERIOD 450
+#endif
+
+/* The Park Mode's Maximum Beacon Period. */
+#ifndef HSP2_BEACON_MAX_PERIOD
+#define HSP2_BEACON_MAX_PERIOD 500
+#endif
+
+/* The duration of the inquiry in seconds. */
+#ifndef HSP2_INQ_DURATION
+#define HSP2_INQ_DURATION 4
+#endif
+
+/* Maximum number of peer responses during an inquiry. */
+#ifndef HSP2_INQ_MAX_NUM_RESPS
+#define HSP2_INQ_MAX_NUM_RESPS 3
+#endif
+
+/* Maximum number of times to retry an inquiry prior to failure. */
+#ifndef HSP2_MAX_INQ_RETRY
+#define HSP2_MAX_INQ_RETRY 6
+#endif
+
+/* Maximum number of times to retry an RFCOMM connection prior to failure. */
+#ifndef HSP2_MAX_CONN_RETRY
+#define HSP2_MAX_CONN_RETRY 3
+#endif
+
+/* If the connect request failed for authentication reasons, do not retry */
+#ifndef HSP2_NO_RETRY_ON_AUTH_FAIL
+#define HSP2_NO_RETRY_ON_AUTH_FAIL TRUE
+#endif
+
+/* Maximum number of characters in an HSP2 device name. */
+#ifndef HSP2_MAX_NAME_LEN
+#define HSP2_MAX_NAME_LEN 32
+#endif
+
+/* The minimum speaker and/or microphone gain setting. */
+#ifndef HSP2_MIN_GAIN
+#define HSP2_MIN_GAIN 0
+#endif
+
+/* The maximum speaker and/or microphone setting. */
+#ifndef HSP2_MAX_GAIN
+#define HSP2_MAX_GAIN 15
+#endif
+
+/* The default value to send on an AT+CKPD. */
+#ifndef HSP2_KEYPRESS_DEFAULT
+#define HSP2_KEYPRESS_DEFAULT 200
+#endif
+
+/* Maximum amount a data that can be received per RFCOMM frame. */
+#ifndef HSP2_MAX_RFC_READ_LEN
+#define HSP2_MAX_RFC_READ_LEN 128
+#endif
+
+/* The time in seconds to wait for completion of a partial AT command or response from the peer. */
+#ifndef HSP2_AT_TO_INTERVAL
+#define HSP2_AT_TO_INTERVAL 30
+#endif
+
+/* The time to wait before repeating a ring to a peer Headset. */
+#ifndef HSP2_REPEAT_RING_TO
+#define HSP2_REPEAT_RING_TO 4
+#endif
+
+/* Time to wait for a response for an AT command */
+#ifndef HSP2_AT_RSP_TO
+#define HSP2_AT_RSP_TO 20
+#endif
+
+/* SCO packet type(s) to use (bitmask: see spec), 0 - device default (recommended) */
+#ifndef HSP2_SCO_PKT_TYPES
+#define HSP2_SCO_PKT_TYPES ((UINT16)0x0000)
+#endif
+
+/* The default settings of the SCO voice link. */
+#ifndef HSP2_DEFAULT_VOICE_SETTINGS
+#define HSP2_DEFAULT_VOICE_SETTINGS (HCI_INP_CODING_LINEAR | HCI_INP_DATA_FMT_2S_COMPLEMENT | HCI_INP_SAMPLE_SIZE_16BIT | HCI_AIR_CODING_FORMAT_CVSD)
+#endif
+
+#ifndef HSP2_MAX_AT_CMD_LENGTH
+#define HSP2_MAX_AT_CMD_LENGTH 16
+#endif
+
+#ifndef HSP2_MAX_AT_VAL_LENGTH
+#if (defined(HFP_INCLUDED) && HFP_INCLUDED == TRUE)
+#define HSP2_MAX_AT_VAL_LENGTH 310
+#else
+#define HSP2_MAX_AT_VAL_LENGTH 5
+#endif
+#endif
+
+
+#ifndef HSP2_SDP_DB_SIZE
+#define HSP2_SDP_DB_SIZE 300
+#endif
+
+
+/******************************************************************************
+**
+** HFP
+**
+******************************************************************************/
+
+#ifndef HFP_INCLUDED
+#define HFP_INCLUDED FALSE
+#endif
+
+/* Include Audio Gateway specific code. */
+#ifndef HFP_AG_INCLUDED
+#define HFP_AG_INCLUDED TRUE
+#endif
+
+/* Include Hand Free Specific Code. */
+#ifndef HFP_HF_INCLUDED
+#define HFP_HF_INCLUDED TRUE
+#endif
+
+/* Use AT interface instead of full blown API */
+#ifndef AT_INTERFACE
+#define AT_INTERFACE FALSE
+#endif
+
+/* HFP Manages SCO establishement for various procedures */
+#ifndef HFP_SCO_MGMT_INCLUDED
+#define HFP_SCO_MGMT_INCLUDED TRUE
+#endif
+
+/* CCAP compliant features and behavior desired */
+#ifndef CCAP_COMPLIANCE
+#define CCAP_COMPLIANCE TRUE
+#endif
+
+/* Caller ID string, part of +CLIP result code */
+#ifndef HFP_MAX_CLIP_INFO
+#define HFP_MAX_CLIP_INFO 45
+#endif
+
+#ifndef HFP_RPT_PEER_INFO_INCLUDED
+#define HFP_RPT_PEER_INFO_INCLUDED TRUE /* Reporting of peer features enabled */
+#endif
+
+/******************************************************************************
+**
+** HID
+**
+******************************************************************************/
+
+/* HID Device Role Included */
+#ifndef HID_DEV_INCLUDED
+#define HID_DEV_INCLUDED FALSE
+#endif
+
+#ifndef HID_DEV_PM_INCLUDED
+#define HID_DEV_PM_INCLUDED TRUE
+#endif
+
+/* The HID Device is a virtual cable */
+#ifndef HID_DEV_VIRTUAL_CABLE
+#define HID_DEV_VIRTUAL_CABLE TRUE
+#endif
+
+/* The HID device initiates the reconnections */
+#ifndef HID_DEV_RECONN_INITIATE
+#define HID_DEV_RECONN_INITIATE TRUE
+#endif
+
+/* THe HID device is normally connectable */
+#ifndef HID_DEV_NORMALLY_CONN
+#define HID_DEV_NORMALLY_CONN FALSE
+#endif
+
+/* The device is battery powered */
+#ifndef HID_DEV_BATTERY_POW
+#define HID_DEV_BATTERY_POW TRUE
+#endif
+
+/* Device is capable of waking up the host */
+#ifndef HID_DEV_REMOTE_WAKE
+#define HID_DEV_REMOTE_WAKE TRUE
+#endif
+
+/* Device needs host to close SDP channel after SDP is over */
+#ifndef HID_DEV_SDP_DISABLE
+#define HID_DEV_SDP_DISABLE TRUE
+#endif
+
+#ifndef HID_DEV_MTU_SIZE
+#define HID_DEV_MTU_SIZE 64
+#endif
+
+#ifndef HID_DEV_FLUSH_TO
+#define HID_DEV_FLUSH_TO 0xffff
+#endif
+
+#ifndef HID_DEV_PAGE_SCAN_WIN
+#define HID_DEV_PAGE_SCAN_WIN (0)
+#endif
+
+#ifndef HID_DEV_PAGE_SCAN_INT
+#define HID_DEV_PAGE_SCAN_INT (0)
+#endif
+
+#ifndef HID_DEV_MAX_CONN_RETRY
+#define HID_DEV_MAX_CONN_RETRY (15)
+#endif
+
+#ifndef HID_DEV_REPAGE_WIN
+#define HID_DEV_REPAGE_WIN (1)
+#endif
+
+#ifndef HID_DEV_SVC_NAME
+#define HID_DEV_SVC_NAME "HID"
+#endif
+
+#ifndef HID_DEV_SVC_DESCR
+#define HID_DEV_SVC_DESCR "3-button mouse and keyboard"
+#endif
+
+#ifndef HID_DEV_PROVIDER_NAME
+#define HID_DEV_PROVIDER_NAME "Widcomm"
+#endif
+
+#ifndef HID_DEV_REL_NUM
+#define HID_DEV_REL_NUM 0x0100
+#endif
+
+#ifndef HID_DEV_PARSER_VER
+#define HID_DEV_PARSER_VER 0x0111
+#endif
+
+#ifndef HID_DEV_SUBCLASS
+#define HID_DEV_SUBCLASS COD_MINOR_POINTING
+#endif
+
+#ifndef HID_DEV_COUNTRY_CODE
+#define HID_DEV_COUNTRY_CODE 0x33
+#endif
+
+#ifndef HID_DEV_SUP_TOUT
+#define HID_DEV_SUP_TOUT 0x8000
+#endif
+
+#ifndef HID_DEV_NUM_LANGS
+#define HID_DEV_NUM_LANGS 1
+#endif
+
+#ifndef HID_DEV_INACT_TIMEOUT
+#define HID_DEV_INACT_TIMEOUT 60
+#endif
+
+#ifndef HID_DEV_BUSY_MODE_PARAMS
+#define HID_DEV_BUSY_MODE_PARAMS { 320, 160, 10, 20, HCI_MODE_ACTIVE }
+#endif
+
+#ifndef HID_DEV_IDLE_MODE_PARAMS
+#define HID_DEV_IDLE_MODE_PARAMS { 320, 160, 10, 20, HCI_MODE_SNIFF }
+#endif
+
+#ifndef HID_DEV_SUSP_MODE_PARAMS
+#define HID_DEV_SUSP_MODE_PARAMS { 640, 320, 0, 0, HCI_MODE_PARK }
+#endif
+
+#ifndef HID_DEV_MAX_DESCRIPTOR_SIZE
+#define HID_DEV_MAX_DESCRIPTOR_SIZE 128 /* Max descriptor size */
+#endif
+
+#ifndef HID_DEV_LANGUAGELIST
+#define HID_DEV_LANGUAGELIST {0x35, 0x06, 0x09, 0x04, 0x09, 0x09, 0x01, 0x00}
+#endif
+
+#ifndef HID_DEV_LINK_SUPERVISION_TO
+#define HID_DEV_LINK_SUPERVISION_TO 0x8000
+#endif
+
+#ifndef HID_CONTROL_POOL_ID
+#define HID_CONTROL_POOL_ID 2
+#endif
+
+#ifndef HID_INTERRUPT_POOL_ID
+#define HID_INTERRUPT_POOL_ID 2
+#endif
+
+#ifndef UCD_HID_INCLUDED
+#define UCD_HID_INCLUDED FALSE
+#endif
+
+#ifndef BRR_HID_INCLUDED
+#define BRR_HID_INCLUDED FALSE
+#endif
+
+/*************************************************************************
+** Definitions for Both HID-Host & Device
+*/
+#ifndef HID_MAX_SVC_NAME_LEN
+#define HID_MAX_SVC_NAME_LEN 32
+#endif
+
+#ifndef HID_MAX_SVC_DESCR_LEN
+#define HID_MAX_SVC_DESCR_LEN 32
+#endif
+
+#ifndef HID_MAX_PROV_NAME_LEN
+#define HID_MAX_PROV_NAME_LEN 32
+#endif
+
+/*************************************************************************
+** Definitions for HID-Host
+*/
+#ifndef HID_HOST_INCLUDED
+#define HID_HOST_INCLUDED FALSE
+#endif
+
+#ifndef HID_HOST_MAX_DEVICES
+#define HID_HOST_MAX_DEVICES 7
+#endif
+
+#ifndef HID_HOST_MTU
+#define HID_HOST_MTU 640
+#endif
+
+#ifndef HID_HOST_FLUSH_TO
+#define HID_HOST_FLUSH_TO 0xffff
+#endif
+
+#ifndef HID_HOST_MAX_CONN_RETRY
+#define HID_HOST_MAX_CONN_RETRY (15)
+#endif
+
+#ifndef HID_HOST_REPAGE_WIN
+#define HID_HOST_REPAGE_WIN (2)
+#endif
+
+
+/******************************************************************************
+**
+** DUN and FAX
+**
+******************************************************************************/
+
+#ifndef DUN_INCLUDED
+#define DUN_INCLUDED FALSE
+#endif
+
+
+/******************************************************************************
+**
+** GOEP
+**
+******************************************************************************/
+
+#ifndef GOEP_INCLUDED
+#define GOEP_INCLUDED FALSE
+#endif
+
+/* This is set to enable GOEP non-blocking file system access functions. */
+#ifndef GOEP_FS_INCLUDED
+#define GOEP_FS_INCLUDED TRUE
+#endif
+
+/* GOEP authentication key size. */
+#ifndef GOEP_MAX_AUTH_KEY_SIZE
+#define GOEP_MAX_AUTH_KEY_SIZE 16
+#endif
+
+/* Maximum size of the realm authentication string. */
+#ifndef GOEP_MAX_AUTH_REALM_SIZE
+#define GOEP_MAX_AUTH_REALM_SIZE 16
+#endif
+
+/* Realm Character Set */
+#ifndef GOEP_REALM_CHARSET
+#define GOEP_REALM_CHARSET 0 /* ASCII */
+#endif
+
+/* This is set to the maximum length of path name allowed in the system (_MAX_PATH). */
+#ifndef GOEP_MAX_PATH_SIZE
+#define GOEP_MAX_PATH_SIZE 255
+#endif
+
+/* Specifies whether or not client's user id is required during obex authentication */
+#ifndef GOEP_SERVER_USERID_REQUIRED
+#define GOEP_SERVER_USERID_REQUIRED FALSE
+#endif
+
+/* This is set to the maximum length of file name allowed in the system (_MAX_FNAME). */
+#ifndef GOEP_MAX_FILE_SIZE
+#define GOEP_MAX_FILE_SIZE 128
+#endif
+
+/* Character used as path separator */
+#ifndef GOEP_PATH_SEPARATOR
+#define GOEP_PATH_SEPARATOR ((char) 0x5c) /* 0x2f ('/'), or 0x5c ('\') */
+#endif
+
+/******************************************************************************
+**
+** OPP
+**
+******************************************************************************/
+
+#ifndef OPP_INCLUDED
+#define OPP_INCLUDED FALSE
+#endif
+
+/* This is set to enable OPP client capabilities. */
+#ifndef OPP_CLIENT_INCLUDED
+#define OPP_CLIENT_INCLUDED FALSE
+#endif
+
+/* This is set to enable OPP server capabilities. */
+#ifndef OPP_SERVER_INCLUDED
+#define OPP_SERVER_INCLUDED FALSE
+#endif
+
+/* if the optional formating functions are to be included or not */
+#ifndef OPP_FORMAT_INCLUDED
+#define OPP_FORMAT_INCLUDED FALSE
+#endif
+
+/* Maximum number of client sessions allowed by server */
+#ifndef OPP_MAX_SRVR_SESS
+#define OPP_MAX_SRVR_SESS 3
+#endif
+
+/******************************************************************************
+**
+** FTP
+**
+******************************************************************************/
+
+#ifndef FTP_INCLUDED
+#define FTP_INCLUDED FALSE
+#endif
+
+/* This is set to enable FTP client capabilities. */
+#ifndef FTP_CLIENT_INCLUDED
+#define FTP_CLIENT_INCLUDED TRUE
+#endif
+
+/* This is set to enable FTP server capabilities. */
+#ifndef FTP_SERVER_INCLUDED
+#define FTP_SERVER_INCLUDED TRUE
+#endif
+
+/******************************************************************************
+**
+** XML Parser
+**
+******************************************************************************/
+
+#ifndef XML_STACK_SIZE
+#define XML_STACK_SIZE 7
+#endif
+
+/******************************************************************************
+**
+** BPP Printer
+**
+******************************************************************************/
+#ifndef BPP_DEBUG
+#define BPP_DEBUG FALSE
+#endif
+
+#ifndef BPP_INCLUDED
+#define BPP_INCLUDED FALSE
+#endif
+
+#ifndef BPP_SND_INCLUDED
+#define BPP_SND_INCLUDED FALSE
+#endif
+
+/* Maximum number of senders allowed to connect simultaneously
+** The maximum is 6 or (OBX_NUM_SERVERS / 2), whichever is smaller
+*/
+#ifndef BPP_PR_MAX_CON
+#define BPP_PR_MAX_CON 3
+#endif
+
+/* Service Name. maximum length: 248
+#ifndef BPP_SERVICE_NAME
+#define BPP_SERVICE_NAME "Basic Printing"
+#endif
+ */
+/* Document Format Supported. ASCII comma-delimited list of MIME type:version string
+#ifndef BPP_DOC_FORMAT_SUPPORTED
+#define BPP_DOC_FORMAT_SUPPORTED "application/vnd.pwg-xhtml-print:1.0,application/vnd.hp-PCL:5E,application/PDF"
+#endif
+
+#ifndef BPP_DOC_FORMAT_SUPPORTED_LEN
+#define BPP_DOC_FORMAT_SUPPORTED_LEN 77
+#endif
+ */
+/* Character repertoires.
+#ifndef BPP_CHARACTER_REPERTOIRES
+#define BPP_CHARACTER_REPERTOIRES {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01}
+#endif
+ */
+/* XHTML formats.
+#ifndef BPP_XHTML_PRINT_FORMATS
+#define BPP_XHTML_PRINT_FORMATS "image/gif:89A,image/jpeg"
+#endif
+
+#ifndef BPP_XHTML_PRINT_FORMATS_LEN
+#define BPP_XHTML_PRINT_FORMATS_LEN 24
+#endif
+ */
+/* Color supported.
+#ifndef BPP_COLOR_SUPORTED
+#define BPP_COLOR_SUPORTED FALSE
+#endif
+ */
+/* 1284 ID string. First 2 bytes are the length.
+#ifndef BPP_1284ID
+#define BPP_1284ID "\x00\x48MANUFACTURER:ACME Manufacturing;COMMAND SET:PCL,MPL;MODEL:LaserBeam \?;"
+#endif
+
+#ifndef BPP_1284ID_LEN
+#define BPP_1284ID_LEN 72
+#endif
+ */
+/* Printer name.
+#ifndef BPP_PRINTER_NAME
+#define BPP_PRINTER_NAME "My Printer"
+#endif
+
+#ifndef BPP_PRINTER_NAME_LEN
+#define BPP_PRINTER_NAME_LEN 10
+#endif
+ */
+
+/* Printer location.
+#ifndef BPP_PRINTER_LOCATION
+#define BPP_PRINTER_LOCATION "Hotel Lobby"
+#endif
+
+#ifndef BPP_PRINTER_LOCATION_LEN
+#define BPP_PRINTER_LOCATION_LEN 11
+#endif
+ */
+/* Duplex printing supported.
+#ifndef BPP_DUPLEX_SUPPORTED
+#define BPP_DUPLEX_SUPPORTED TRUE
+#endif
+ */
+
+/* Media types supported.
+#ifndef BPP_MEDIA_TYPES_SUPPORTED
+#define BPP_MEDIA_TYPES_SUPPORTED "stationary,continuous-long,photographic-high-gloss,cardstock"
+#endif
+
+#ifndef BPP_MEDIA_TYPES_SUPPORTED_LEN
+#define BPP_MEDIA_TYPES_SUPPORTED_LEN 60
+#endif
+ */
+/* Maximum media with supported.
+#ifndef BPP_MAX_MEDIA_WIDTH
+#define BPP_MAX_MEDIA_WIDTH 205
+#endif
+ */
+/* Maximum media length supported.
+#ifndef BPP_MAX_MEDIA_LENGTH
+#define BPP_MAX_MEDIA_LENGTH 285
+#endif
+ */
+/* the maximum string len for the media size of medium loaded */
+#ifndef BPP_MEDIA_SIZE_LEN
+#define BPP_MEDIA_SIZE_LEN 33
+#endif
+
+/* Debug Trace the SOAP object, if TRUE */
+#ifndef BPP_TRACE_XML
+#define BPP_TRACE_XML TRUE
+#endif
+
+/* in case that the SOAP object does not all come in one OBEX packet,
+ * this size of data may be kept in the BPP control block for continuing parsing.
+ * The maximum is the size of the biggest GKI buffer (GKI_MAX_BUF_SIZE) */
+#ifndef BPP_SOAP_KEEP_SIZE
+#define BPP_SOAP_KEEP_SIZE 200
+#endif
+
+
+/******************************************************************************
+**
+** BIP
+**
+******************************************************************************/
+#ifndef BIP_INCLUDED
+#define BIP_INCLUDED FALSE
+#endif
+
+/* TRUE to include imaging initiator */
+#ifndef BIP_INITR_INCLUDED
+#define BIP_INITR_INCLUDED FALSE
+#endif
+
+/* TRUE to include imaging responder */
+#ifndef BIP_RSPDR_INCLUDED
+#define BIP_RSPDR_INCLUDED FALSE
+#endif
+
+/* TRUE to include image push feature */
+#ifndef BIP_PUSH_INCLUDED
+#define BIP_PUSH_INCLUDED TRUE
+#endif
+
+/* TRUE to include image pull feature */
+#ifndef BIP_PULL_INCLUDED
+#define BIP_PULL_INCLUDED TRUE
+#endif
+
+/* TRUE to include advanced image printing feature */
+#ifndef BIP_PRINTING_INCLUDED
+#define BIP_PRINTING_INCLUDED TRUE
+#endif
+
+/* TRUE to include automatic archive feature */
+#ifndef BIP_ARCHIVE_INCLUDED
+#define BIP_ARCHIVE_INCLUDED TRUE
+#endif
+
+/* TRUE to include remote camera feature */
+#ifndef BIP_CAMERA_INCLUDED
+#define BIP_CAMERA_INCLUDED TRUE
+#endif
+
+/* TRUE to include remote display feature */
+#ifndef BIP_DISPLAY_INCLUDED
+#define BIP_DISPLAY_INCLUDED TRUE
+#endif
+
+/* TRUE to include sanity check code for API functions */
+#ifndef BIP_SANITY_CHECKS
+#define BIP_SANITY_CHECKS TRUE
+#endif
+
+/* TRUE to show the received XML object in trace for conformance tests */
+#ifndef BIP_TRACE_XML
+#define BIP_TRACE_XML TRUE
+#endif
+
+/* in case that the received XML object is not complete, the XML parser state machine needs
+ * to keep a copy of the data from the last '<'
+ * This macro specifies the maximun amount of data for this purpose */
+#ifndef BIP_XML_CARRY_OVER_LEN
+#define BIP_XML_CARRY_OVER_LEN 100
+#endif
+
+/* minimum 4, maximum is 255. The value should be set to the maximum size of encoding string + 1. JPEG2000.
+ * If vendor specific format is supported, it might be bigger than 9 */
+#ifndef BIP_IMG_ENCODE_SIZE
+#define BIP_IMG_ENCODE_SIZE 9
+#endif
+
+/* MIME type: text/plain */
+#ifndef BIP_TYPE_SIZE
+#define BIP_TYPE_SIZE 20
+#endif
+
+/* example: iso-8895-1 */
+#ifndef BIP_CHARSET_SIZE
+#define BIP_CHARSET_SIZE 10
+#endif
+
+/* friendly name */
+#ifndef BIP_FNAME_SIZE
+#define BIP_FNAME_SIZE 20
+#endif
+
+/* service name */
+#ifndef BIP_SNAME_SIZE
+#define BIP_SNAME_SIZE 60
+#endif
+
+/* temporary storage file name(for file system access, may include path) */
+#ifndef BIP_TEMP_NAME_SIZE
+#define BIP_TEMP_NAME_SIZE 200
+#endif
+
+/* image file name */
+#ifndef BIP_IMG_NAME_SIZE
+#define BIP_IMG_NAME_SIZE 200
+#endif
+
+/* attachment file name */
+#ifndef BIP_ATT_NAME_SIZE
+#define BIP_ATT_NAME_SIZE 200
+#endif
+
+/* object (image, attachment, thumbnail) file name (may be used for file system) */
+#ifndef BIP_OBJ_NAME_SIZE
+#define BIP_OBJ_NAME_SIZE 200
+#endif
+
+
+
+/******************************************************************************
+**
+** HCRP
+**
+******************************************************************************/
+
+#ifndef HCRP_INCLUDED
+#define HCRP_INCLUDED FALSE
+#endif
+
+/* This is set to enable server. */
+#ifndef HCRP_SERVER_INCLUDED
+#define HCRP_SERVER_INCLUDED FALSE
+#endif
+
+/* This is set to enable client. */
+#ifndef HCRP_CLIENT_INCLUDED
+#define HCRP_CLIENT_INCLUDED FALSE
+#endif
+
+/* TRUE enables the notification option of the profile. */
+#ifndef HCRP_NOTIFICATION_INCLUDED
+#define HCRP_NOTIFICATION_INCLUDED TRUE
+#endif
+
+/* TRUE enables the vendor specific option of the profile. */
+#ifndef HCRP_VENDOR_SPEC_INCLUDED
+#define HCRP_VENDOR_SPEC_INCLUDED TRUE
+#endif
+
+/* TRUE enables state machine traces. */
+#ifndef HCRP_FSM_DEBUG
+#define HCRP_FSM_DEBUG FALSE
+#endif
+
+/* TRUE enables protocol message traces. */
+#ifndef HCRP_PROTO_DEBUG
+#define HCRP_PROTO_DEBUG FALSE
+#endif
+
+/* Maximum length used to store the service name (Minimum 1). */
+#ifndef HCRP_MAX_SERVICE_NAME_LEN
+#define HCRP_MAX_SERVICE_NAME_LEN 32
+#endif
+
+/* Maximum length used to store the device name (Minimum 1). */
+#ifndef HCRP_MAX_DEVICE_NAME_LEN
+#define HCRP_MAX_DEVICE_NAME_LEN 32
+#endif
+
+/* Maximum length of device location (Minimum 1) */
+#ifndef HCRP_MAX_DEVICE_LOC_LEN
+#define HCRP_MAX_DEVICE_LOC_LEN 32
+#endif
+
+/* Maximum length used to store the friendly name (Minimum 1). */
+#ifndef HCRP_MAX_FRIENDLY_NAME_LEN
+#define HCRP_MAX_FRIENDLY_NAME_LEN 32
+#endif
+
+/* Maximum length used to store the 1284 id string (Minimum 2 byte length field). */
+#ifndef HCRP_MAX_SDP_1284_ID_LEN
+#define HCRP_MAX_SDP_1284_ID_LEN 128
+#endif
+
+/* Maximum length for parameters to be processed for vendor specific commands. */
+#ifndef HCRP_MAX_VEND_SPEC_LEN
+#define HCRP_MAX_VEND_SPEC_LEN 4
+#endif
+
+/* Number of seconds to wait for 2nd GAP to open. */
+#ifndef HCRP_OPEN_CHAN_TOUT
+#define HCRP_OPEN_CHAN_TOUT 5
+#endif
+
+/* Number of seconds to wait for 2nd GAP to close. */
+#ifndef HCRP_CLOSE_CHAN_TOUT
+#define HCRP_CLOSE_CHAN_TOUT 3
+#endif
+
+/* Number of seconds to wait for the application to respond to a protocol request. */
+#ifndef HCRP_APPL_RSP_TOUT
+#define HCRP_APPL_RSP_TOUT 5
+#endif
+
+/* Number of seconds to wait for the peer device to respond to a protocol request. */
+#ifndef HCRP_CMD_RSP_TOUT
+#define HCRP_CMD_RSP_TOUT 7
+#endif
+
+/* Number of seconds between subsequent credit requests to the server when the send watermark has been exceeded. */
+#ifndef HCRP_CREDIT_REQ_UPDATES
+#define HCRP_CREDIT_REQ_UPDATES 1
+#endif
+
+/* Maximum number of results to return in a HCRP_FindServices search. */
+#ifndef HCRP_MAX_SEARCH_RESULTS
+#define HCRP_MAX_SEARCH_RESULTS 1
+#endif
+
+/* Maximum number of bytes to be reserved for searching for the client's notification record. */
+#ifndef HCRP_MAX_NOTIF_DISC_BUF
+#define HCRP_MAX_NOTIF_DISC_BUF 300
+#endif
+
+/* Maximum number of clients the server will allow to be registered for notifications. */
+#ifndef HCRP_MAX_NOTIF_CLIENTS
+#define HCRP_MAX_NOTIF_CLIENTS 3
+#endif
+
+/* Spec says minimum of two notification retries. */
+#ifndef HCRP_NOTIF_NUM_RETRIES
+#define HCRP_NOTIF_NUM_RETRIES 4
+#endif
+
+/*************************************************************************
+** Definitions for Multi-Client Server HCRP
+** Note: Many of the above HCRP definitions are also used
+** Maximum number of clients allowed to connect simultaneously
+** Must be less than ((GAP_MAX_CONNECTIONS - 1) / 2)
+*/
+#ifndef HCRPM_MAX_CLIENTS
+#define HCRPM_MAX_CLIENTS 3
+#endif
+
+
+/******************************************************************************
+**
+** PAN
+**
+******************************************************************************/
+
+#ifndef PAN_INCLUDED
+#define PAN_INCLUDED FALSE
+#endif
+
+
+/******************************************************************************
+**
+** SAP
+**
+******************************************************************************/
+
+#ifndef SAP_SERVER_INCLUDED
+#define SAP_SERVER_INCLUDED FALSE
+#endif
+
+
+/*************************************************************************
+ * A2DP Definitions
+ */
+#ifndef A2D_INCLUDED
+#define A2D_INCLUDED FALSE
+#endif
+
+/* TRUE to include SBC utility functions */
+#ifndef A2D_SBC_INCLUDED
+#define A2D_SBC_INCLUDED A2D_INCLUDED
+#endif
+
+/* TRUE to include MPEG-1,2 (mp3) utility functions */
+#ifndef A2D_M12_INCLUDED
+#define A2D_M12_INCLUDED A2D_INCLUDED
+#endif
+
+/* TRUE to include MPEG-2,4 (aac) utility functions */
+#ifndef A2D_M24_INCLUDED
+#define A2D_M24_INCLUDED A2D_INCLUDED
+#endif
+
+/*************************************************************************
+ * VDP Definitions
+ */
+#ifndef VDP_INCLUDED
+#define VDP_INCLUDED FALSE
+#endif
+
+/******************************************************************************
+**
+** AVCTP
+**
+******************************************************************************/
+
+#ifndef AVCT_INCLUDED
+#define AVCT_INCLUDED FALSE
+#endif
+
+/* Number of simultaneous ACL links to different peer devices. */
+#ifndef AVCT_NUM_LINKS
+#define AVCT_NUM_LINKS 2
+#endif
+
+/* Number of simultaneous AVCTP connections. */
+#ifndef AVCT_NUM_CONN
+#define AVCT_NUM_CONN 3
+#endif
+
+/* TRUE to support the browsing channel. */
+#ifndef AVCT_BROWSE_INCLUDED
+#define AVCT_BROWSE_INCLUDED TRUE
+#endif
+
+#if ((L2CAP_FCR_INCLUDED == FALSE) && (AVCT_BROWSE_INCLUDED == TRUE))
+#undef AVCT_BROWSE_INCLUDED
+#define AVCT_BROWSE_INCLUDED FALSE
+#endif
+
+/* Pool ID where to reassemble the SDU.
+ This Pool allows buffers to be used that are larger than
+ the L2CAP_MAX_MTU. */
+#ifndef AVCT_BR_USER_RX_POOL_ID
+#define AVCT_BR_USER_RX_POOL_ID HCI_ACL_POOL_ID
+#endif
+
+/* Pool ID where to hold the SDU.
+ This Pool allows buffers to be used that are larger than
+ the L2CAP_MAX_MTU. */
+#ifndef AVCT_BR_USER_TX_POOL_ID
+#define AVCT_BR_USER_TX_POOL_ID HCI_ACL_POOL_ID
+#endif
+
+/*
+GKI Buffer Pool ID used to hold MPS segments during SDU reassembly
+*/
+#ifndef AVCT_BR_FCR_RX_POOL_ID
+#define AVCT_BR_FCR_RX_POOL_ID HCI_ACL_POOL_ID
+#endif
+
+/*
+GKI Buffer Pool ID used to hold MPS segments used in (re)transmissions.
+L2CAP_DEFAULT_ERM_POOL_ID is specified to use the HCI ACL data pool.
+Note: This pool needs to have enough buffers to hold two times the window size negotiated
+ in the tL2CAP_FCR_OPTIONS (2 * tx_win_size) to allow for retransmissions.
+ The size of each buffer must be able to hold the maximum MPS segment size passed in
+ tL2CAP_FCR_OPTIONS plus BT_HDR (8) + HCI preamble (4) + L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec).
+*/
+#ifndef AVCT_BR_FCR_TX_POOL_ID
+#define AVCT_BR_FCR_TX_POOL_ID HCI_ACL_POOL_ID
+#endif
+
+/* AVCTP Browsing channel FCR Option:
+Size of the transmission window when using enhanced retransmission mode. Not used
+in basic and streaming modes. Range: 1 - 63
+*/
+#ifndef AVCT_BR_FCR_OPT_TX_WINDOW_SIZE
+#define AVCT_BR_FCR_OPT_TX_WINDOW_SIZE 10
+#endif
+
+/* AVCTP Browsing channel FCR Option:
+Number of transmission attempts for a single I-Frame before taking
+Down the connection. Used In ERTM mode only. Value is Ignored in basic and
+Streaming modes.
+Range: 0, 1-0xFF
+0 - infinite retransmissions
+1 - single transmission
+*/
+#ifndef AVCT_BR_FCR_OPT_MAX_TX_B4_DISCNT
+#define AVCT_BR_FCR_OPT_MAX_TX_B4_DISCNT 20
+#endif
+
+/* AVCTP Browsing channel FCR Option: Retransmission Timeout
+The AVRCP specification set a value in the range of 300 - 2000 ms
+Timeout (in msecs) to detect Lost I-Frames. Only used in Enhanced retransmission mode.
+Range: Minimum 2000 (2 secs) when supporting PBF.
+ */
+#ifndef AVCT_BR_FCR_OPT_RETX_TOUT
+#define AVCT_BR_FCR_OPT_RETX_TOUT 2000
+#endif
+
+/* AVCTP Browsing channel FCR Option: Monitor Timeout
+The AVRCP specification set a value in the range of 300 - 2000 ms
+Timeout (in msecs) to detect Lost S-Frames. Only used in Enhanced retransmission mode.
+Range: Minimum 12000 (12 secs) when supporting PBF.
+*/
+#ifndef AVCT_BR_FCR_OPT_MONITOR_TOUT
+#define AVCT_BR_FCR_OPT_MONITOR_TOUT 12000
+#endif
+
+/******************************************************************************
+**
+** AVRCP
+**
+******************************************************************************/
+
+#ifndef AVRC_INCLUDED
+#define AVRC_INCLUDED FALSE
+#endif
+
+/* TRUE to support AVRCP 1.3 - Metadata. */
+#ifndef AVRC_METADATA_INCLUDED
+#define AVRC_METADATA_INCLUDED TRUE
+#endif
+
+/* TRUE to support AVRCP 1.4 - Advanced Control. */
+#ifndef AVRC_ADV_CTRL_INCLUDED
+#define AVRC_ADV_CTRL_INCLUDED TRUE
+#endif
+
+/******************************************************************************
+**
+** MCAP
+**
+******************************************************************************/
+#ifndef MCA_INCLUDED
+#define MCA_INCLUDED FALSE
+#endif
+
+/* TRUE to support Clock Synchronization OpCodes */
+#ifndef MCA_SYNC_INCLUDED
+#define MCA_SYNC_INCLUDED FALSE
+#endif
+
+/* The MTU size for the L2CAP configuration on control channel. 48 is the minimal */
+#ifndef MCA_CTRL_MTU
+#define MCA_CTRL_MTU 60
+#endif
+
+/* The maximum number of registered MCAP instances. */
+#ifndef MCA_NUM_REGS
+#define MCA_NUM_REGS 3
+#endif
+
+/* The maximum number of control channels (to difference devices) per registered MCAP instances. */
+#ifndef MCA_NUM_LINKS
+#define MCA_NUM_LINKS 3
+#endif
+
+/* The maximum number of MDEP (including HDP echo) per registered MCAP instances. */
+#ifndef MCA_NUM_DEPS
+#define MCA_NUM_DEPS 3
+#endif
+
+/* The maximum number of MDL link per control channel. */
+#ifndef MCA_NUM_MDLS
+#define MCA_NUM_MDLS 4
+#endif
+
+/* Pool ID where to reassemble the SDU. */
+#ifndef MCA_USER_RX_POOL_ID
+#define MCA_USER_RX_POOL_ID HCI_ACL_POOL_ID
+#endif
+
+/* Pool ID where to hold the SDU. */
+#ifndef MCA_USER_TX_POOL_ID
+#define MCA_USER_TX_POOL_ID HCI_ACL_POOL_ID
+#endif
+
+/*
+GKI Buffer Pool ID used to hold MPS segments during SDU reassembly
+*/
+#ifndef MCA_FCR_RX_POOL_ID
+#define MCA_FCR_RX_POOL_ID HCI_ACL_POOL_ID
+#endif
+
+/*
+GKI Buffer Pool ID used to hold MPS segments used in (re)transmissions.
+L2CAP_DEFAULT_ERM_POOL_ID is specified to use the HCI ACL data pool.
+Note: This pool needs to have enough buffers to hold two times the window size negotiated
+ in the tL2CAP_FCR_OPTIONS (2 * tx_win_size) to allow for retransmissions.
+ The size of each buffer must be able to hold the maximum MPS segment size passed in
+ tL2CAP_FCR_OPTIONS plus BT_HDR (8) + HCI preamble (4) + L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec).
+*/
+#ifndef MCA_FCR_TX_POOL_ID
+#define MCA_FCR_TX_POOL_ID HCI_ACL_POOL_ID
+#endif
+
+/* MCAP control channel FCR Option:
+Size of the transmission window when using enhanced retransmission mode.
+1 is defined by HDP specification for control channel.
+*/
+#ifndef MCA_FCR_OPT_TX_WINDOW_SIZE
+#define MCA_FCR_OPT_TX_WINDOW_SIZE 1
+#endif
+
+/* MCAP control channel FCR Option:
+Number of transmission attempts for a single I-Frame before taking
+Down the connection. Used In ERTM mode only. Value is Ignored in basic and
+Streaming modes.
+Range: 0, 1-0xFF
+0 - infinite retransmissions
+1 - single transmission
+*/
+#ifndef MCA_FCR_OPT_MAX_TX_B4_DISCNT
+#define MCA_FCR_OPT_MAX_TX_B4_DISCNT 20
+#endif
+
+/* MCAP control channel FCR Option: Retransmission Timeout
+The AVRCP specification set a value in the range of 300 - 2000 ms
+Timeout (in msecs) to detect Lost I-Frames. Only used in Enhanced retransmission mode.
+Range: Minimum 2000 (2 secs) when supporting PBF.
+ */
+#ifndef MCA_FCR_OPT_RETX_TOUT
+#define MCA_FCR_OPT_RETX_TOUT 2000
+#endif
+
+/* MCAP control channel FCR Option: Monitor Timeout
+The AVRCP specification set a value in the range of 300 - 2000 ms
+Timeout (in msecs) to detect Lost S-Frames. Only used in Enhanced retransmission mode.
+Range: Minimum 12000 (12 secs) when supporting PBF.
+*/
+#ifndef MCA_FCR_OPT_MONITOR_TOUT
+#define MCA_FCR_OPT_MONITOR_TOUT 12000
+#endif
+
+/* MCAP control channel FCR Option: Maximum PDU payload size.
+The maximum number of payload octets that the local device can receive in a single PDU.
+*/
+#ifndef MCA_FCR_OPT_MPS_SIZE
+#define MCA_FCR_OPT_MPS_SIZE 1000
+#endif
+
+/* Shared transport */
+#ifndef NFC_SHARED_TRANSPORT_ENABLED
+#define NFC_SHARED_TRANSPORT_ENABLED FALSE
+#endif
+
+/******************************************************************************
+**
+** SER
+**
+******************************************************************************/
+
+#ifndef SER_INCLUDED
+#define SER_INCLUDED FALSE
+#endif
+
+/* Task which runs the serial application. */
+#ifndef SER_TASK
+#define SER_TASK BTE_APPL_TASK
+#endif
+
+/* Mailbox used by serial application. */
+#ifndef SER_MBOX
+#define SER_MBOX TASK_MBOX_1
+#endif
+
+/* Mailbox mask. */
+#ifndef SER_MBOX_MASK
+#define SER_MBOX_MASK TASK_MBOX_1_EVT_MASK
+#endif
+
+/* TX path application event. */
+#ifndef SER_TX_PATH_APPL_EVT
+#define SER_TX_PATH_APPL_EVT EVENT_MASK(APPL_EVT_3)
+#endif
+
+/* RX path application event. */
+#ifndef SER_RX_PATH_APPL_EVT
+#define SER_RX_PATH_APPL_EVT EVENT_MASK(APPL_EVT_4)
+#endif
+
+/******************************************************************************
+**
+** HCI Services
+**
+******************************************************************************/
+/* Event mask reserved for handling HCIS events HCISU_TASK */
+#ifndef HCISU_EVT_MASK
+#define HCISU_EVT_MASK EVENT_MASK(APPL_EVT_0)
+#endif
+
+/* MBox reserved for handling HCIS events HCISU_TASK */
+#ifndef HCISU_MBOX
+#define HCISU_MBOX TASK_MBOX_2
+#endif
+
+/* MBox event mask reserved for handling HCIS events HCISU_TASK */
+#ifndef HCISU_MBOX_EVT_MASK
+#define HCISU_MBOX_EVT_MASK TASK_MBOX_2_EVT_MASK
+#endif
+
+/* Timer reserved for handling HCIS events HCISU_TASK */
+#ifndef HCISU_TIMER
+#define HCISU_TIMER TIMER_2
+#endif
+
+/* Timer event mask reserved for handling HCIS events HCISU_TASK */
+#ifndef HCISU_TIMER_EVT_MASK
+#define HCISU_TIMER_EVT_MASK TIMER_2_EVT_MASK
+#endif
+
+/******************************************************************************
+**
+** HCI UART
+**
+******************************************************************************/
+#ifndef BAUDRATE_UPDATE_ENCODED_INCLUDED
+#define BAUDRATE_UPDATE_ENCODED_INCLUDED FALSE
+#endif
+
+/******************************************************************************
+**
+** HCI Services (H5 3 wired uart), H4 plus SLIP enabled
+**
+******************************************************************************/
+#ifndef SLIP_INCLUDED
+#define SLIP_INCLUDED TRUE
+#endif
+
+#ifndef SLIP_STATIS_INCLUDED
+#define SLIP_STATIS_INCLUDED TRUE
+#endif
+
+#ifndef SLIP_SW_FLOW_CTRL
+#define SLIP_SW_FLOW_CTRL TRUE
+#endif
+
+#ifndef BT_TRACE_SLIP
+#define BT_TRACE_SLIP FALSE
+#endif
+
+#ifndef SLIP_HOST_SLIDING_WINDOW_SIZE
+#define SLIP_HOST_SLIDING_WINDOW_SIZE 7
+#endif
+
+#ifndef SLIP_MAX_RETRANSMIT
+#define SLIP_MAX_RETRANSMIT 10
+#endif
+
+/* time (in ms) interval between WAKEUP messages */
+#ifndef SLIP_WAKEUP_INTERVAL
+#define SLIP_WAKEUP_INTERVAL 10
+#endif
+
+/* max trial to send WAKEUP messages up to 255 */
+#ifndef SLIP_MAX_WAKEUP_TRIAL
+#define SLIP_MAX_WAKEUP_TRIAL 10
+#endif
+
+/*
+The H5 work around sequence will be:
+
+1. controller sends CONFIG with configuration field. (This is not spec compliance.
+ Controller shall not have configuration field. This initiates work around.)
+2. host ignore the configuration field.
+3. Host sends CONFIG with configuration field.
+4. controller reponse CONFIG_RESPONSE with configuration field. This shall be the
+ final configuration both FW and STACK use. (spec compliance).
+5. Host copied the configuration field over and sent CONFIG_RESPONSE with this
+ configuration field (workaround)
+*/
+
+#ifndef SLIP_CONFIG_FIELD_WORK_AROUND_INCLUDED
+#define SLIP_CONFIG_FIELD_WORK_AROUND_INCLUDED TRUE
+#endif
+
+/******************************************************************************
+**
+** Sleep Mode (Low Power Mode)
+**
+******************************************************************************/
+#ifndef HCILP_INCLUDED
+#define HCILP_INCLUDED TRUE
+#endif
+
+/* sleep mode
+
+ 0: disable
+ 1: UART with Host wake/BT wake out of band signals
+ 4: H4IBSS, UART with in band signal without Host/BT wake
+ 9: H5 with in band signal of SLIP without Host/BT wake
+*/
+#ifndef HCILP_SLEEP_MODE
+#define HCILP_SLEEP_MODE (0)
+#endif
+
+/* Host Stack Idle Threshold in 300ms or 25ms, it depends on controller
+
+ In sleep mode 1, this is the number of firmware loops executed with no activity
+ before the Host wake line is deasserted. Activity includes HCI traffic excluding
+ certain sleep mode commands and the presence of SCO connections if the
+ "Allow Host Sleep During SCO" flag is not set to 1. Each count of this
+ parameter is roughly equivalent to 300ms or 25ms.
+
+ Not applicable for sleep mode 4(H4IBSS) and 9(H5)
+*/
+#ifndef HCILP_IDLE_THRESHOLD
+#define HCILP_IDLE_THRESHOLD (1)
+#endif
+
+/* Host Controller Idle Threshold in 300ms or 25ms, it depends on controller
+
+ This is the number of firmware loops executed with no activity before the HC is
+ considered idle. Depending on the mode, HC may then attempt to sleep.
+ Activity includes HCI traffic excluding certain sleep mode commands and
+ the presence of ACL/SCO connections.
+
+ Not applicable for sleep mode 4(H4IBSS)
+*/
+#ifndef HCILP_HC_IDLE_THRESHOLD
+#define HCILP_HC_IDLE_THRESHOLD (1)
+#endif
+
+/* GPIO for BT_WAKE signal */
+/* Not applicable for sleep mode 4(H4IBSS) and 9(H5) */
+#ifndef HCILP_BT_WAKE_GPIO
+#define HCILP_BT_WAKE_GPIO UPIO_GENERAL1
+#endif
+
+/* GPIO for HOST_WAKE signal */
+/* Not applicable for sleep mode 4(H4IBSS) and 9(H5) */
+#ifndef HCILP_HOST_WAKE_GPIO
+#define HCILP_HOST_WAKE_GPIO UPIO_GENERAL2
+#endif
+
+/* BT_WAKE Polarity - 0=Active Low, 1= Active High */
+/* Not applicable for sleep mode 4(H4IBSS) and 9(H5) */
+#ifndef HCILP_BT_WAKE_POLARITY
+#define HCILP_BT_WAKE_POLARITY 0
+#endif
+
+/* HOST_WAKE Polarity - 0=Active Low, 1= Active High */
+/* Not applicable for sleep mode 4(H4IBSS) and 9(H5) */
+#ifndef HCILP_HOST_WAKE_POLARITY
+#define HCILP_HOST_WAKE_POLARITY 0
+#endif
+
+/* HCILP_ALLOW_HOST_SLEEP_DURING_SCO
+
+ When this flag is set to 0, the host is not allowed to sleep while
+ an SCO is active. In sleep mode 1, the device will keep the host
+ wake line asserted while an SCO is active.
+ When this flag is set to 1, the host can sleep while an SCO is active.
+ This flag should only be set to 1 if SCO traffic is directed to the PCM interface.
+
+ Not applicable for sleep mode 4(H4IBSS) and 9(H5)
+*/
+#ifndef HCILP_ALLOW_HOST_SLEEP_DURING_SCO
+#define HCILP_ALLOW_HOST_SLEEP_DURING_SCO 1
+#endif
+
+/* HCILP_COMBINE_SLEEP_MODE_AND_LPM
+
+ In Mode 0, always set byte 7 to 0. In sleep mode 1, device always
+ requires permission to sleep between scans / periodic inquiries regardless
+ of the setting of this byte. In sleep mode 1, if byte is set, device must
+ have "permission" to sleep during the low power modes of sniff, hold, and park.
+ If byte is not set, device can sleep without permission during these modes.
+ Permission to sleep in Mode 1 is obtained if the BT_WAKE signal is not asserted.
+
+ Not applicable for sleep mode 4(H4IBSS) and 9(H5)
+*/
+#ifndef HCILP_COMBINE_SLEEP_MODE_AND_LPM
+#define HCILP_COMBINE_SLEEP_MODE_AND_LPM 1
+#endif
+
+/* HCILP_ENABLE_UART_TXD_TRI_STATE
+
+ When set to 0, the device will not tristate its UART TX line before going to sleep.
+ When set to 1, the device will tristate its UART TX line before going to sleep.
+
+ Not applicable for sleep mode 4(H4IBSS) and 9(H5)
+*/
+#ifndef HCILP_ENABLE_UART_TXD_TRI_STATE
+#define HCILP_ENABLE_UART_TXD_TRI_STATE 0
+#endif
+
+/* HCILP_PULSED_HOST_WAKE
+
+ Not applicable for sleep mode 4(H4IBSS) and 9(H5)
+*/
+#ifndef HCILP_PULSED_HOST_WAKE
+#define HCILP_PULSED_HOST_WAKE 0
+#endif
+
+/* HCILP_SLEEP_GUARD_TIME
+
+ Only for sleep mode 4(H4IBSS)
+ Time in 12.5ms between starting to monitor controller's CTS and raising its RTS
+*/
+#ifndef HCILP_SLEEP_GUARD_TIME
+#define HCILP_SLEEP_GUARD_TIME 5
+#endif
+
+/* HCILP_WAKEUP_GUARD_TIME
+
+ Only for sleep mode 4(H4IBSS)
+ Time in 12.5ms between starting to monitor controller's CTS and lowering its RTS
+*/
+#ifndef HCILP_WAKEUP_GUARD_TIME
+#define HCILP_WAKEUP_GUARD_TIME 5
+#endif
+
+/* HCILP_TXD_CONFIG
+
+ Only for sleep mode 4(H4IBSS)
+ 0: controller's TXD stays low in sleep mode
+ 1: controller's TXD stays high in sleep mode (default)
+*/
+#ifndef HCILP_TXD_CONFIG
+#define HCILP_TXD_CONFIG 1
+#endif
+
+/* HCILP_BT_WAKE_IDLE_TIMEOUT
+
+ host's idle time in ms before initiating sleep procedure
+*/
+#ifndef HCILP_BT_WAKE_IDLE_TIMEOUT
+#define HCILP_BT_WAKE_IDLE_TIMEOUT 50
+#endif
+
+#ifndef H4IBSS_INCLUDED
+#define H4IBSS_INCLUDED TRUE
+#endif
+
+/* display H4IBSS state and event in text */
+#ifndef H4IBSS_DEBUG
+#define H4IBSS_DEBUG TRUE
+#endif
+
+/* time interval before going into sleep after having sent or received SLEEP_REQ_ACK */
+/* Valid range is 20 - 50 ms */
+#ifndef H4IBSS_SLEEP_GUARD_TIME
+#define H4IBSS_SLEEP_GUARD_TIME (40)
+#endif
+
+/* timeout(msec) to wait for response of sleep request */
+#ifndef H4IBSS_SLEEP_REQ_RESP_TIME
+#define H4IBSS_SLEEP_REQ_RESP_TIME (50)
+#endif
+
+/******************************************************************************
+**
+** RPC
+**
+******************************************************************************/
+
+#ifndef RPC_INCLUDED
+#define RPC_INCLUDED FALSE
+#endif
+
+/* RPCT task mailbox ID for messages coming from rpcgen code. */
+#ifndef RPCT_MBOX
+#define RPCT_MBOX TASK_MBOX_0
+#endif
+
+/* RPCT task event for mailbox. */
+#ifndef RPCT_RPC_MBOX_EVT
+#define RPCT_RPC_MBOX_EVT TASK_MBOX_0_EVT_MASK
+#endif
+
+/* RPCT task event from driver indicating RX data is ready. */
+#ifndef RPCT_RX_READY_EVT
+#define RPCT_RX_READY_EVT APPL_EVT_0
+#endif
+
+/* RPCT task event from driver indicating data TX is done. */
+#ifndef RPCT_TX_DONE_EVT
+#define RPCT_TX_DONE_EVT APPL_EVT_1
+#endif
+
+/* RPCT task event indicating data is in the circular buffer. */
+#ifndef RPCT_UCBUF_EVT
+#define RPCT_UCBUF_EVT APPL_EVT_2
+#endif
+
+/* Task ID of RPCGEN task. */
+#ifndef RPCGEN_TASK
+#define RPCGEN_TASK BTU_TASK
+#endif
+
+/* RPCGEN task event for messages coming from RPCT. */
+#ifndef RPCGEN_MSG_EVT
+#define RPCGEN_MSG_EVT TASK_MBOX_1_EVT_MASK
+#endif
+
+#ifndef RPCGEN_MSG_MBOX
+#define RPCGEN_MSG_MBOX TASK_MBOX_1
+#endif
+
+/* Size of circular buffer used to store diagnostic messages. */
+#ifndef RPCT_UCBUF_SIZE
+#define RPCT_UCBUF_SIZE 2000
+#endif
+
+/******************************************************************************
+**
+** SAP - Sample ICP and HSP applications
+**
+******************************************************************************/
+
+#ifndef SAP_INCLUDED
+#define SAP_INCLUDED FALSE
+#endif
+
+#ifndef ICA_INCLUDED
+#define ICA_INCLUDED FALSE
+#endif
+
+#ifndef HSA_HS_INCLUDED
+#define HSA_HS_INCLUDED FALSE
+#endif
+
+#ifndef HSA_AG_INCLUDED
+#define HSA_AG_INCLUDED FALSE
+#endif
+
+#ifndef MMI_INCLUDED
+#define MMI_INCLUDED FALSE
+#endif
+
+/* MMI task event from driver indicating RX data is ready. */
+#ifndef MMI_RX_READY_EVT
+#define MMI_RX_READY_EVT APPL_EVT_0
+#endif
+
+/******************************************************************************
+**
+** APPL - Application Task
+**
+******************************************************************************/
+/* When TRUE indicates that an application task is to be run */
+#ifndef APPL_INCLUDED
+#define APPL_INCLUDED FALSE
+#endif
+
+/* When TRUE remote terminal code included (RPC MUST be included) */
+#ifndef RSI_INCLUDED
+#define RSI_INCLUDED FALSE
+#endif
+
+
+
+#define L2CAP_FEATURE_REQ_ID 73
+#define L2CAP_FEATURE_RSP_ID 173
+
+
+#define L2CAP_ENHANCED_FEATURES 0
+
+
+
+/* Use gki_delay for patch ram */
+#ifndef BCM2045_USE_DELAY
+#if ( SLIP_INCLUDED == TRUE )
+/* H5 need to be initialized after sending download mini driver HCI command */
+#define BCM2045_USE_DELAY FALSE
+#else
+#define BCM2045_USE_DELAY TRUE
+#endif
+#endif
+
+/******************************************************************************
+**
+** BTA
+**
+******************************************************************************/
+/* BTA EIR canned UUID list (default is dynamic) */
+#ifndef BTA_EIR_CANNED_UUID_LIST
+#define BTA_EIR_CANNED_UUID_LIST FALSE
+#endif
+
+/* Number of supported customer UUID in EIR */
+#ifndef BTA_EIR_SERVER_NUM_CUSTOM_UUID
+#define BTA_EIR_SERVER_NUM_CUSTOM_UUID 8
+#endif
+
+/******************************************************************************
+**
+** BTE
+**
+******************************************************************************/
+#ifndef BTE_PLATFORM_IDLE
+#define BTE_PLATFORM_IDLE
+#endif
+
+#ifndef BTE_IDLE_TASK_INCLUDED
+#define BTE_IDLE_TASK_INCLUDED TRUE
+#endif
+
+#ifndef BTE_PLATFORM_INITHW
+#define BTE_PLATFORM_INITHW
+#endif
+
+#ifndef BTE_BTA_CODE_INCLUDED
+#define BTE_BTA_CODE_INCLUDED FALSE
+#endif
+
+
+/******************************************************************************
+**
+** BTTRC
+**
+******************************************************************************/
+/* Whether to parse and display traces-> Platform specific implementation */
+#ifndef BTTRC_DISP
+#define BTTRC_DISP BTTRC_DispOnInsight
+#endif
+
+/******************************************************************************
+**
+** Tracing: Include trace header file here.
+**
+******************************************************************************/
+
+#include "bt_trace.h"
+
+#endif /* BT_TARGET_H */
+