| // |
| // Copyright (C) 2015 The Android Open Source Project |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // |
| |
| #include "update_engine/payload_generator/delta_diff_utils.h" |
| |
| #include <algorithm> |
| #include <string> |
| #include <vector> |
| |
| #include <base/files/scoped_file.h> |
| #include <base/format_macros.h> |
| #include <base/strings/stringprintf.h> |
| #include <gtest/gtest.h> |
| |
| #include "update_engine/common/test_utils.h" |
| #include "update_engine/common/utils.h" |
| #include "update_engine/payload_generator/delta_diff_generator.h" |
| #include "update_engine/payload_generator/extent_ranges.h" |
| #include "update_engine/payload_generator/extent_utils.h" |
| #include "update_engine/payload_generator/fake_filesystem.h" |
| |
| using std::string; |
| using std::vector; |
| |
| namespace chromeos_update_engine { |
| |
| namespace { |
| |
| // Writes the |data| in the blocks specified by |extents| on the partition |
| // |part_path|. The |data| size could be smaller than the size of the blocks |
| // passed. |
| bool WriteExtents(const string& part_path, |
| const vector<Extent>& extents, |
| off_t block_size, |
| const brillo::Blob& data) { |
| uint64_t offset = 0; |
| base::ScopedFILE fp(fopen(part_path.c_str(), "r+")); |
| TEST_AND_RETURN_FALSE(fp.get()); |
| |
| for (const Extent& extent : extents) { |
| if (offset >= data.size()) |
| break; |
| TEST_AND_RETURN_FALSE( |
| fseek(fp.get(), extent.start_block() * block_size, SEEK_SET) == 0); |
| uint64_t to_write = std::min(extent.num_blocks() * block_size, |
| data.size() - offset); |
| TEST_AND_RETURN_FALSE( |
| fwrite(data.data() + offset, 1, to_write, fp.get()) == to_write); |
| offset += extent.num_blocks() * block_size; |
| } |
| return true; |
| } |
| |
| // Create a fake filesystem of the given |size| and initialize the partition |
| // holding it in the PartitionConfig |part|. |
| void CreatePartition(PartitionConfig* part, const string& pattern, |
| uint64_t block_size, off_t size) { |
| int fd = -1; |
| ASSERT_TRUE(utils::MakeTempFile(pattern.c_str(), &part->path, &fd)); |
| ASSERT_EQ(0, ftruncate(fd, size)); |
| ASSERT_EQ(0, close(fd)); |
| part->fs_interface.reset(new FakeFilesystem(block_size, size / block_size)); |
| part->size = size; |
| } |
| |
| // Writes to the |partition| path blocks such they are all different and they |
| // include the tag passed in |tag|, making them also different to any other |
| // block on a partition initialized with this function with a different tag. |
| // The |block_size| should be a divisor of the partition size. |
| // Returns whether the function succeeded writing the partition. |
| bool InitializePartitionWithUniqueBlocks(const PartitionConfig& part, |
| uint64_t block_size, |
| uint64_t tag) { |
| TEST_AND_RETURN_FALSE(part.size % block_size == 0); |
| size_t num_blocks = part.size / block_size; |
| brillo::Blob file_data(part.size); |
| for (size_t i = 0; i < num_blocks; ++i) { |
| string prefix = base::StringPrintf( |
| "block tag 0x%.16" PRIx64 ", block number %16" PRIuS " ", tag, i); |
| brillo::Blob block_data(prefix.begin(), prefix.end()); |
| TEST_AND_RETURN_FALSE(prefix.size() <= block_size); |
| block_data.resize(block_size, 'X'); |
| std::copy(block_data.begin(), block_data.end(), |
| file_data.begin() + i * block_size); |
| } |
| return test_utils::WriteFileVector(part.path, file_data); |
| } |
| |
| } // namespace |
| |
| class DeltaDiffUtilsTest : public ::testing::Test { |
| protected: |
| const uint64_t kDefaultBlockCount = 128; |
| |
| void SetUp() override { |
| CreatePartition(&old_part_, "DeltaDiffUtilsTest-old_part-XXXXXX", |
| block_size_, block_size_ * kDefaultBlockCount); |
| CreatePartition(&new_part_, "DeltaDiffUtilsTest-old_part-XXXXXX", |
| block_size_, block_size_ * kDefaultBlockCount); |
| ASSERT_TRUE(utils::MakeTempFile("DeltaDiffUtilsTest-blob-XXXXXX", |
| &blob_path_, |
| &blob_fd_)); |
| } |
| |
| void TearDown() override { |
| unlink(old_part_.path.c_str()); |
| unlink(new_part_.path.c_str()); |
| if (blob_fd_ != -1) |
| close(blob_fd_); |
| unlink(blob_path_.c_str()); |
| } |
| |
| // Helper function to call DeltaMovedAndZeroBlocks() using this class' data |
| // members. This simply avoid repeating all the arguments that never change. |
| bool RunDeltaMovedAndZeroBlocks(ssize_t chunk_blocks, |
| bool src_ops_allowed) { |
| BlobFileWriter blob_file(blob_fd_, &blob_size_); |
| return diff_utils::DeltaMovedAndZeroBlocks( |
| &aops_, |
| old_part_.path, |
| new_part_.path, |
| old_part_.size / block_size_, |
| new_part_.size / block_size_, |
| chunk_blocks, |
| src_ops_allowed, |
| &blob_file, |
| &old_visited_blocks_, |
| &new_visited_blocks_); |
| } |
| |
| // Old and new temporary partitions used in the tests. These are initialized |
| // with |
| PartitionConfig old_part_{"part"}; |
| PartitionConfig new_part_{"part"}; |
| |
| // The file holding the output blob from the various diff utils functions. |
| string blob_path_; |
| int blob_fd_{-1}; |
| off_t blob_size_{0}; |
| |
| size_t block_size_{kBlockSize}; |
| |
| // Default input/output arguments used when calling DeltaMovedAndZeroBlocks(). |
| vector<AnnotatedOperation> aops_; |
| ExtentRanges old_visited_blocks_; |
| ExtentRanges new_visited_blocks_; |
| }; |
| |
| TEST_F(DeltaDiffUtilsTest, MoveSmallTest) { |
| brillo::Blob data_blob(block_size_); |
| test_utils::FillWithData(&data_blob); |
| |
| // The old file is on a different block than the new one. |
| vector<Extent> old_extents = { ExtentForRange(11, 1) }; |
| vector<Extent> new_extents = { ExtentForRange(1, 1) }; |
| |
| EXPECT_TRUE(WriteExtents(old_part_.path, old_extents, kBlockSize, data_blob)); |
| EXPECT_TRUE(WriteExtents(new_part_.path, new_extents, kBlockSize, data_blob)); |
| |
| brillo::Blob data; |
| InstallOperation op; |
| EXPECT_TRUE(diff_utils::ReadExtentsToDiff( |
| old_part_.path, |
| new_part_.path, |
| old_extents, |
| new_extents, |
| true, // bsdiff_allowed |
| &data, |
| &op, |
| false)); // src_ops_allowed |
| EXPECT_TRUE(data.empty()); |
| |
| EXPECT_TRUE(op.has_type()); |
| EXPECT_EQ(InstallOperation::MOVE, op.type()); |
| EXPECT_FALSE(op.has_data_offset()); |
| EXPECT_FALSE(op.has_data_length()); |
| EXPECT_EQ(1, op.src_extents_size()); |
| EXPECT_EQ(kBlockSize, op.src_length()); |
| EXPECT_EQ(1, op.dst_extents_size()); |
| EXPECT_EQ(kBlockSize, op.dst_length()); |
| EXPECT_EQ(BlocksInExtents(op.src_extents()), |
| BlocksInExtents(op.dst_extents())); |
| EXPECT_EQ(1, BlocksInExtents(op.dst_extents())); |
| } |
| |
| TEST_F(DeltaDiffUtilsTest, MoveWithSameBlock) { |
| // Setup the old/new files so that it has immobile chunks; we make sure to |
| // utilize all sub-cases of such chunks: blocks 21--22 induce a split (src) |
| // and complete removal (dst), whereas blocks 24--25 induce trimming of the |
| // tail (src) and head (dst) of extents. The final block (29) is used for |
| // ensuring we properly account for the number of bytes removed in cases where |
| // the last block is partly filled. The detailed configuration: |
| // |
| // Old: [ 20 21 22 23 24 25 ] [ 28 29 ] |
| // New: [ 18 ] [ 21 22 ] [ 20 ] [ 24 25 26 ] [ 29 ] |
| // Same: ^^ ^^ ^^ ^^ ^^ |
| vector<Extent> old_extents = { |
| ExtentForRange(20, 6), |
| ExtentForRange(28, 2) }; |
| vector<Extent> new_extents = { |
| ExtentForRange(18, 1), |
| ExtentForRange(21, 2), |
| ExtentForRange(20, 1), |
| ExtentForRange(24, 3), |
| ExtentForRange(29, 1) }; |
| |
| uint64_t num_blocks = BlocksInExtents(old_extents); |
| EXPECT_EQ(num_blocks, BlocksInExtents(new_extents)); |
| |
| // The size of the data should match the total number of blocks. Each block |
| // has a different content. |
| brillo::Blob file_data; |
| for (uint64_t i = 0; i < num_blocks; ++i) { |
| file_data.resize(file_data.size() + kBlockSize, 'a' + i); |
| } |
| |
| EXPECT_TRUE(WriteExtents(old_part_.path, old_extents, kBlockSize, file_data)); |
| EXPECT_TRUE(WriteExtents(new_part_.path, new_extents, kBlockSize, file_data)); |
| |
| brillo::Blob data; |
| InstallOperation op; |
| EXPECT_TRUE(diff_utils::ReadExtentsToDiff( |
| old_part_.path, |
| new_part_.path, |
| old_extents, |
| new_extents, |
| true, // bsdiff_allowed |
| &data, |
| &op, |
| false)); // src_ops_allowed |
| |
| EXPECT_TRUE(data.empty()); |
| |
| EXPECT_TRUE(op.has_type()); |
| EXPECT_EQ(InstallOperation::MOVE, op.type()); |
| EXPECT_FALSE(op.has_data_offset()); |
| EXPECT_FALSE(op.has_data_length()); |
| |
| // The expected old and new extents that actually moved. See comment above. |
| old_extents = { |
| ExtentForRange(20, 1), |
| ExtentForRange(23, 1), |
| ExtentForRange(28, 1) }; |
| new_extents = { |
| ExtentForRange(18, 1), |
| ExtentForRange(20, 1), |
| ExtentForRange(26, 1) }; |
| num_blocks = BlocksInExtents(old_extents); |
| |
| EXPECT_EQ(num_blocks * kBlockSize, op.src_length()); |
| EXPECT_EQ(num_blocks * kBlockSize, op.dst_length()); |
| |
| EXPECT_EQ(old_extents.size(), op.src_extents_size()); |
| for (int i = 0; i < op.src_extents_size(); i++) { |
| EXPECT_EQ(old_extents[i].start_block(), op.src_extents(i).start_block()) |
| << "i == " << i; |
| EXPECT_EQ(old_extents[i].num_blocks(), op.src_extents(i).num_blocks()) |
| << "i == " << i; |
| } |
| |
| EXPECT_EQ(new_extents.size(), op.dst_extents_size()); |
| for (int i = 0; i < op.dst_extents_size(); i++) { |
| EXPECT_EQ(new_extents[i].start_block(), op.dst_extents(i).start_block()) |
| << "i == " << i; |
| EXPECT_EQ(new_extents[i].num_blocks(), op.dst_extents(i).num_blocks()) |
| << "i == " << i; |
| } |
| } |
| |
| TEST_F(DeltaDiffUtilsTest, BsdiffSmallTest) { |
| // Test a BSDIFF operation from block 1 to block 2. |
| brillo::Blob data_blob(kBlockSize); |
| test_utils::FillWithData(&data_blob); |
| |
| // The old file is on a different block than the new one. |
| vector<Extent> old_extents = { ExtentForRange(1, 1) }; |
| vector<Extent> new_extents = { ExtentForRange(2, 1) }; |
| |
| EXPECT_TRUE(WriteExtents(old_part_.path, old_extents, kBlockSize, data_blob)); |
| // Modify one byte in the new file. |
| data_blob[0]++; |
| EXPECT_TRUE(WriteExtents(new_part_.path, new_extents, kBlockSize, data_blob)); |
| |
| brillo::Blob data; |
| InstallOperation op; |
| EXPECT_TRUE(diff_utils::ReadExtentsToDiff( |
| old_part_.path, |
| new_part_.path, |
| old_extents, |
| new_extents, |
| true, // bsdiff_allowed |
| &data, |
| &op, |
| false)); // src_ops_allowed |
| |
| EXPECT_FALSE(data.empty()); |
| |
| EXPECT_TRUE(op.has_type()); |
| EXPECT_EQ(InstallOperation::BSDIFF, op.type()); |
| EXPECT_FALSE(op.has_data_offset()); |
| EXPECT_FALSE(op.has_data_length()); |
| EXPECT_EQ(1, op.src_extents_size()); |
| EXPECT_EQ(kBlockSize, op.src_length()); |
| EXPECT_EQ(1, op.dst_extents_size()); |
| EXPECT_EQ(kBlockSize, op.dst_length()); |
| EXPECT_EQ(BlocksInExtents(op.src_extents()), |
| BlocksInExtents(op.dst_extents())); |
| EXPECT_EQ(1, BlocksInExtents(op.dst_extents())); |
| } |
| |
| TEST_F(DeltaDiffUtilsTest, BsdiffNotAllowedTest) { |
| // Same setup as the previous test, but this time BSDIFF operations are not |
| // allowed. |
| brillo::Blob data_blob(kBlockSize); |
| test_utils::FillWithData(&data_blob); |
| |
| // The old file is on a different block than the new one. |
| vector<Extent> old_extents = { ExtentForRange(1, 1) }; |
| vector<Extent> new_extents = { ExtentForRange(2, 1) }; |
| |
| EXPECT_TRUE(WriteExtents(old_part_.path, old_extents, kBlockSize, data_blob)); |
| // Modify one byte in the new file. |
| data_blob[0]++; |
| EXPECT_TRUE(WriteExtents(new_part_.path, new_extents, kBlockSize, data_blob)); |
| |
| brillo::Blob data; |
| InstallOperation op; |
| EXPECT_TRUE(diff_utils::ReadExtentsToDiff( |
| old_part_.path, |
| new_part_.path, |
| old_extents, |
| new_extents, |
| false, // bsdiff_allowed |
| &data, |
| &op, |
| false)); // src_ops_allowed |
| |
| EXPECT_FALSE(data.empty()); |
| |
| // The point of this test is that we don't use BSDIFF the way the above |
| // did. The rest of the details are to be caught in other tests. |
| EXPECT_TRUE(op.has_type()); |
| EXPECT_NE(InstallOperation::BSDIFF, op.type()); |
| } |
| |
| TEST_F(DeltaDiffUtilsTest, BsdiffNotAllowedMoveTest) { |
| brillo::Blob data_blob(kBlockSize); |
| test_utils::FillWithData(&data_blob); |
| |
| // The old file is on a different block than the new one. |
| vector<Extent> old_extents = { ExtentForRange(1, 1) }; |
| vector<Extent> new_extents = { ExtentForRange(2, 1) }; |
| |
| EXPECT_TRUE(WriteExtents(old_part_.path, old_extents, kBlockSize, data_blob)); |
| EXPECT_TRUE(WriteExtents(new_part_.path, new_extents, kBlockSize, data_blob)); |
| |
| brillo::Blob data; |
| InstallOperation op; |
| EXPECT_TRUE(diff_utils::ReadExtentsToDiff( |
| old_part_.path, |
| new_part_.path, |
| old_extents, |
| new_extents, |
| false, // bsdiff_allowed |
| &data, |
| &op, |
| false)); // src_ops_allowed |
| |
| EXPECT_TRUE(data.empty()); |
| |
| // The point of this test is that we can still use a MOVE for a file |
| // that is blacklisted. |
| EXPECT_TRUE(op.has_type()); |
| EXPECT_EQ(InstallOperation::MOVE, op.type()); |
| } |
| |
| TEST_F(DeltaDiffUtilsTest, ReplaceSmallTest) { |
| // The old file is on a different block than the new one. |
| vector<Extent> old_extents = { ExtentForRange(1, 1) }; |
| vector<Extent> new_extents = { ExtentForRange(2, 1) }; |
| |
| // Make a blob that's just 1's that will compress well. |
| brillo::Blob ones(kBlockSize, 1); |
| |
| // Make a blob with random data that won't compress well. |
| brillo::Blob random_data; |
| std::mt19937 gen(12345); |
| std::uniform_int_distribution<uint8_t> dis(0, 255); |
| for (uint32_t i = 0; i < kBlockSize; i++) { |
| random_data.push_back(dis(gen)); |
| } |
| |
| for (int i = 0; i < 2; i++) { |
| brillo::Blob data_to_test = i == 0 ? random_data : ones; |
| // The old_extents will be initialized with 0. |
| EXPECT_TRUE(WriteExtents(new_part_.path, new_extents, kBlockSize, |
| data_to_test)); |
| |
| brillo::Blob data; |
| InstallOperation op; |
| EXPECT_TRUE(diff_utils::ReadExtentsToDiff( |
| old_part_.path, |
| new_part_.path, |
| old_extents, |
| new_extents, |
| true, // bsdiff_allowed |
| &data, |
| &op, |
| false)); // src_ops_allowed |
| EXPECT_FALSE(data.empty()); |
| |
| EXPECT_TRUE(op.has_type()); |
| const InstallOperation_Type expected_type = |
| (i == 0 ? InstallOperation::REPLACE : InstallOperation::REPLACE_BZ); |
| EXPECT_EQ(expected_type, op.type()); |
| EXPECT_FALSE(op.has_data_offset()); |
| EXPECT_FALSE(op.has_data_length()); |
| EXPECT_EQ(0, op.src_extents_size()); |
| EXPECT_FALSE(op.has_src_length()); |
| EXPECT_EQ(1, op.dst_extents_size()); |
| EXPECT_EQ(data_to_test.size(), op.dst_length()); |
| EXPECT_EQ(1, BlocksInExtents(op.dst_extents())); |
| } |
| } |
| |
| TEST_F(DeltaDiffUtilsTest, SourceCopyTest) { |
| // Makes sure SOURCE_COPY operations are emitted whenever src_ops_allowed |
| // is true. It is the same setup as MoveSmallTest, which checks that |
| // the operation is well-formed. |
| brillo::Blob data_blob(kBlockSize); |
| test_utils::FillWithData(&data_blob); |
| |
| // The old file is on a different block than the new one. |
| vector<Extent> old_extents = { ExtentForRange(11, 1) }; |
| vector<Extent> new_extents = { ExtentForRange(1, 1) }; |
| |
| EXPECT_TRUE(WriteExtents(old_part_.path, old_extents, kBlockSize, data_blob)); |
| EXPECT_TRUE(WriteExtents(new_part_.path, new_extents, kBlockSize, data_blob)); |
| |
| brillo::Blob data; |
| InstallOperation op; |
| EXPECT_TRUE(diff_utils::ReadExtentsToDiff( |
| old_part_.path, |
| new_part_.path, |
| old_extents, |
| new_extents, |
| true, // bsdiff_allowed |
| &data, |
| &op, |
| true)); // src_ops_allowed |
| EXPECT_TRUE(data.empty()); |
| |
| EXPECT_TRUE(op.has_type()); |
| EXPECT_EQ(InstallOperation::SOURCE_COPY, op.type()); |
| } |
| |
| TEST_F(DeltaDiffUtilsTest, SourceBsdiffTest) { |
| // Makes sure SOURCE_BSDIFF operations are emitted whenever src_ops_allowed |
| // is true. It is the same setup as BsdiffSmallTest, which checks |
| // that the operation is well-formed. |
| brillo::Blob data_blob(kBlockSize); |
| test_utils::FillWithData(&data_blob); |
| |
| // The old file is on a different block than the new one. |
| vector<Extent> old_extents = { ExtentForRange(1, 1) }; |
| vector<Extent> new_extents = { ExtentForRange(2, 1) }; |
| |
| EXPECT_TRUE(WriteExtents(old_part_.path, old_extents, kBlockSize, data_blob)); |
| // Modify one byte in the new file. |
| data_blob[0]++; |
| EXPECT_TRUE(WriteExtents(new_part_.path, new_extents, kBlockSize, data_blob)); |
| |
| brillo::Blob data; |
| InstallOperation op; |
| EXPECT_TRUE(diff_utils::ReadExtentsToDiff( |
| old_part_.path, |
| new_part_.path, |
| old_extents, |
| new_extents, |
| true, // bsdiff_allowed |
| &data, |
| &op, |
| true)); // src_ops_allowed |
| |
| EXPECT_FALSE(data.empty()); |
| EXPECT_TRUE(op.has_type()); |
| EXPECT_EQ(InstallOperation::SOURCE_BSDIFF, op.type()); |
| } |
| |
| TEST_F(DeltaDiffUtilsTest, IsNoopOperationTest) { |
| InstallOperation op; |
| op.set_type(InstallOperation::REPLACE_BZ); |
| EXPECT_FALSE(diff_utils::IsNoopOperation(op)); |
| op.set_type(InstallOperation::MOVE); |
| EXPECT_TRUE(diff_utils::IsNoopOperation(op)); |
| *(op.add_src_extents()) = ExtentForRange(3, 2); |
| *(op.add_dst_extents()) = ExtentForRange(3, 2); |
| EXPECT_TRUE(diff_utils::IsNoopOperation(op)); |
| *(op.add_src_extents()) = ExtentForRange(7, 5); |
| *(op.add_dst_extents()) = ExtentForRange(7, 5); |
| EXPECT_TRUE(diff_utils::IsNoopOperation(op)); |
| *(op.add_src_extents()) = ExtentForRange(20, 2); |
| *(op.add_dst_extents()) = ExtentForRange(20, 1); |
| *(op.add_dst_extents()) = ExtentForRange(21, 1); |
| EXPECT_TRUE(diff_utils::IsNoopOperation(op)); |
| *(op.add_src_extents()) = ExtentForRange(24, 1); |
| *(op.add_dst_extents()) = ExtentForRange(25, 1); |
| EXPECT_FALSE(diff_utils::IsNoopOperation(op)); |
| } |
| |
| TEST_F(DeltaDiffUtilsTest, FilterNoopOperations) { |
| AnnotatedOperation aop1; |
| aop1.op.set_type(InstallOperation::REPLACE_BZ); |
| *(aop1.op.add_dst_extents()) = ExtentForRange(3, 2); |
| aop1.name = "aop1"; |
| |
| AnnotatedOperation aop2 = aop1; |
| aop2.name = "aop2"; |
| |
| AnnotatedOperation noop; |
| noop.op.set_type(InstallOperation::MOVE); |
| *(noop.op.add_src_extents()) = ExtentForRange(3, 2); |
| *(noop.op.add_dst_extents()) = ExtentForRange(3, 2); |
| noop.name = "noop"; |
| |
| vector<AnnotatedOperation> ops = {noop, aop1, noop, noop, aop2, noop}; |
| diff_utils::FilterNoopOperations(&ops); |
| EXPECT_EQ(2u, ops.size()); |
| EXPECT_EQ("aop1", ops[0].name); |
| EXPECT_EQ("aop2", ops[1].name); |
| } |
| |
| // Test the simple case where all the blocks are different and no new blocks are |
| // zeroed. |
| TEST_F(DeltaDiffUtilsTest, NoZeroedOrUniqueBlocksDetected) { |
| InitializePartitionWithUniqueBlocks(old_part_, block_size_, 5); |
| InitializePartitionWithUniqueBlocks(new_part_, block_size_, 42); |
| |
| EXPECT_TRUE(RunDeltaMovedAndZeroBlocks(-1, // chunk_blocks |
| false)); // src_ops_allowed |
| |
| EXPECT_EQ(0, old_visited_blocks_.blocks()); |
| EXPECT_EQ(0, new_visited_blocks_.blocks()); |
| EXPECT_EQ(0, blob_size_); |
| EXPECT_TRUE(aops_.empty()); |
| } |
| |
| // Test that when the partitions have identical blocks in the same positions no |
| // MOVE operation is performed and all the blocks are handled. |
| TEST_F(DeltaDiffUtilsTest, IdenticalPartitionsDontMove) { |
| InitializePartitionWithUniqueBlocks(old_part_, block_size_, 42); |
| InitializePartitionWithUniqueBlocks(new_part_, block_size_, 42); |
| |
| // Mark some of the blocks as already visited. |
| vector<Extent> already_visited = {ExtentForRange(5, 10), |
| ExtentForRange(25, 10)}; |
| old_visited_blocks_.AddExtents(already_visited); |
| new_visited_blocks_.AddExtents(already_visited); |
| |
| // Most of the blocks rest in the same place, but there's no need for MOVE |
| // operations on those blocks. |
| EXPECT_TRUE(RunDeltaMovedAndZeroBlocks(-1, // chunk_blocks |
| false)); // src_ops_allowed |
| |
| EXPECT_EQ(kDefaultBlockCount, old_visited_blocks_.blocks()); |
| EXPECT_EQ(kDefaultBlockCount, new_visited_blocks_.blocks()); |
| EXPECT_EQ(0, blob_size_); |
| EXPECT_TRUE(aops_.empty()); |
| } |
| |
| // Test that when the partitions have identical blocks in the same positions |
| // MOVE operation is performed and all the blocks are handled. |
| TEST_F(DeltaDiffUtilsTest, IdenticalBlocksAreCopiedFromSource) { |
| // We use a smaller partition for this test. |
| old_part_.size = kBlockSize * 50; |
| new_part_.size = kBlockSize * 50; |
| |
| InitializePartitionWithUniqueBlocks(old_part_, block_size_, 42); |
| InitializePartitionWithUniqueBlocks(new_part_, block_size_, 42); |
| |
| // Mark some of the blocks as already visited. |
| vector<Extent> already_visited = {ExtentForRange(5, 5), |
| ExtentForRange(25, 7)}; |
| old_visited_blocks_.AddExtents(already_visited); |
| new_visited_blocks_.AddExtents(already_visited); |
| |
| // Override some of the old blocks with different data. |
| vector<Extent> different_blocks = {ExtentForRange(40, 5)}; |
| EXPECT_TRUE(WriteExtents(old_part_.path, different_blocks, kBlockSize, |
| brillo::Blob(5 * kBlockSize, 'a'))); |
| |
| EXPECT_TRUE(RunDeltaMovedAndZeroBlocks(10, // chunk_blocks |
| true)); // src_ops_allowed |
| |
| ExtentRanges expected_ranges; |
| expected_ranges.AddExtent(ExtentForRange(0, 50)); |
| expected_ranges.SubtractExtents(different_blocks); |
| |
| EXPECT_EQ(expected_ranges.extent_set(), old_visited_blocks_.extent_set()); |
| EXPECT_EQ(expected_ranges.extent_set(), new_visited_blocks_.extent_set()); |
| EXPECT_EQ(0, blob_size_); |
| |
| // We expect all the blocks that we didn't override with |different_blocks| |
| // and that we didn't mark as visited in |already_visited| to match and have a |
| // SOURCE_COPY operation chunked at 10 blocks. |
| vector<Extent> expected_op_extents = { |
| ExtentForRange(0, 5), |
| ExtentForRange(10, 10), |
| ExtentForRange(20, 5), |
| ExtentForRange(32, 8), |
| ExtentForRange(45, 5), |
| }; |
| |
| EXPECT_EQ(expected_op_extents.size(), aops_.size()); |
| for (size_t i = 0; i < aops_.size() && i < expected_op_extents.size(); ++i) { |
| SCOPED_TRACE(base::StringPrintf("Failed on operation number %" PRIuS, i)); |
| const AnnotatedOperation& aop = aops_[i]; |
| EXPECT_EQ(InstallOperation::SOURCE_COPY, aop.op.type()); |
| EXPECT_EQ(1, aop.op.src_extents_size()); |
| EXPECT_EQ(expected_op_extents[i], aop.op.src_extents(0)); |
| EXPECT_EQ(1, aop.op.dst_extents_size()); |
| EXPECT_EQ(expected_op_extents[i], aop.op.dst_extents(0)); |
| } |
| } |
| |
| TEST_F(DeltaDiffUtilsTest, IdenticalBlocksAreCopiedInOder) { |
| // We use a smaller partition for this test. |
| old_part_.size = block_size_ * 50; |
| new_part_.size = block_size_ * 50; |
| |
| // Create two identical partitions with 5 copies of the same unique "file". |
| brillo::Blob file_data(block_size_ * 10, 'a'); |
| for (size_t offset = 0; offset < file_data.size(); offset += block_size_) |
| file_data[offset] = 'a' + offset / block_size_; |
| |
| brillo::Blob partition_data(old_part_.size); |
| for (size_t offset = 0; offset < partition_data.size(); |
| offset += file_data.size()) { |
| std::copy(file_data.begin(), file_data.end(), |
| partition_data.begin() + offset); |
| } |
| EXPECT_TRUE(test_utils::WriteFileVector(old_part_.path, partition_data)); |
| EXPECT_TRUE(test_utils::WriteFileVector(new_part_.path, partition_data)); |
| |
| EXPECT_TRUE(RunDeltaMovedAndZeroBlocks(-1, // chunk_blocks |
| true)); // src_ops_allowed |
| |
| // There should be only one SOURCE_COPY, for the whole partition and the |
| // source extents should cover only the first copy of the source file since |
| // we prefer to re-read files (maybe cached) instead of continue reading the |
| // rest of the partition. |
| EXPECT_EQ(1, aops_.size()); |
| const AnnotatedOperation& aop = aops_[0]; |
| EXPECT_EQ(InstallOperation::SOURCE_COPY, aop.op.type()); |
| EXPECT_EQ(5, aop.op.src_extents_size()); |
| for (int i = 0; i < aop.op.src_extents_size(); ++i) { |
| EXPECT_EQ(ExtentForRange(0, 10), aop.op.src_extents(i)); |
| } |
| |
| EXPECT_EQ(1, aop.op.dst_extents_size()); |
| EXPECT_EQ(ExtentForRange(0, 50), aop.op.dst_extents(0)); |
| |
| EXPECT_EQ(0, blob_size_); |
| } |
| |
| // Test that all blocks with zeros are handled separately using REPLACE_BZ |
| // operations unless they are not moved. |
| TEST_F(DeltaDiffUtilsTest, ZeroBlocksUseReplaceBz) { |
| InitializePartitionWithUniqueBlocks(old_part_, block_size_, 42); |
| InitializePartitionWithUniqueBlocks(new_part_, block_size_, 5); |
| |
| // We set four ranges of blocks with zeros: a single block, a range that fits |
| // in the chunk size, a range that doesn't and finally a range of zeros that |
| // was also zeros in the old image. |
| vector<Extent> new_zeros = { |
| ExtentForRange(10, 1), |
| ExtentForRange(20, 4), |
| // The last range is split since the old image has zeros in part of it. |
| ExtentForRange(30, 20), |
| }; |
| brillo::Blob zeros_data(BlocksInExtents(new_zeros) * block_size_, '\0'); |
| EXPECT_TRUE(WriteExtents(new_part_.path, new_zeros, block_size_, zeros_data)); |
| |
| vector<Extent> old_zeros = vector<Extent>{ExtentForRange(43, 7)}; |
| EXPECT_TRUE(WriteExtents(old_part_.path, old_zeros, block_size_, zeros_data)); |
| |
| EXPECT_TRUE(RunDeltaMovedAndZeroBlocks(5, // chunk_blocks |
| false)); // src_ops_allowed |
| |
| // Zeroed blocks from old_visited_blocks_ were copied over, so me actually |
| // use them regardless of the trivial MOVE operation not being emitted. |
| EXPECT_EQ(old_zeros, |
| old_visited_blocks_.GetExtentsForBlockCount( |
| old_visited_blocks_.blocks())); |
| |
| // All the new zeroed blocks should be used, part with REPLACE_BZ and part |
| // trivial MOVE operations (not included). |
| EXPECT_EQ(new_zeros, |
| new_visited_blocks_.GetExtentsForBlockCount( |
| new_visited_blocks_.blocks())); |
| |
| vector<Extent> expected_op_extents = { |
| ExtentForRange(10, 1), |
| ExtentForRange(20, 4), |
| // This range should be split. |
| ExtentForRange(30, 5), |
| ExtentForRange(35, 5), |
| ExtentForRange(40, 3), |
| }; |
| |
| EXPECT_EQ(expected_op_extents.size(), aops_.size()); |
| for (size_t i = 0; i < aops_.size() && i < expected_op_extents.size(); ++i) { |
| SCOPED_TRACE(base::StringPrintf("Failed on operation number %" PRIuS, i)); |
| const AnnotatedOperation& aop = aops_[i]; |
| EXPECT_EQ(InstallOperation::REPLACE_BZ, aop.op.type()); |
| EXPECT_EQ(0, aop.op.src_extents_size()); |
| EXPECT_EQ(1, aop.op.dst_extents_size()); |
| EXPECT_EQ(expected_op_extents[i], aop.op.dst_extents(0)); |
| } |
| EXPECT_NE(0, blob_size_); |
| } |
| |
| TEST_F(DeltaDiffUtilsTest, ShuffledBlocksAreTracked) { |
| vector<uint64_t> permutation = {0, 1, 5, 6, 7, 2, 3, 4, 9, 10, 11, 12, 8}; |
| vector<Extent> perm_extents; |
| for (uint64_t x : permutation) |
| AppendBlockToExtents(&perm_extents, x); |
| |
| // We use a smaller partition for this test. |
| old_part_.size = block_size_ * permutation.size(); |
| new_part_.size = block_size_ * permutation.size(); |
| InitializePartitionWithUniqueBlocks(new_part_, block_size_, 123); |
| |
| // We initialize the old_part_ with the blocks from new_part but in the |
| // |permutation| order. Block i in the old_part_ will contain the same data |
| // as block permutation[i] in the new_part_. |
| brillo::Blob new_contents; |
| EXPECT_TRUE(utils::ReadFile(new_part_.path, &new_contents)); |
| EXPECT_TRUE(WriteExtents(old_part_.path, perm_extents, block_size_, |
| new_contents)); |
| |
| EXPECT_TRUE(RunDeltaMovedAndZeroBlocks(-1, // chunk_blocks |
| true)); // src_ops_allowed |
| |
| EXPECT_EQ(permutation.size(), old_visited_blocks_.blocks()); |
| EXPECT_EQ(permutation.size(), new_visited_blocks_.blocks()); |
| |
| // There should be only one SOURCE_COPY, with a complicate list of extents. |
| EXPECT_EQ(1, aops_.size()); |
| const AnnotatedOperation& aop = aops_[0]; |
| EXPECT_EQ(InstallOperation::SOURCE_COPY, aop.op.type()); |
| vector<Extent> aop_src_extents; |
| ExtentsToVector(aop.op.src_extents(), &aop_src_extents); |
| EXPECT_EQ(perm_extents, aop_src_extents); |
| |
| EXPECT_EQ(1, aop.op.dst_extents_size()); |
| EXPECT_EQ(ExtentForRange(0, permutation.size()), aop.op.dst_extents(0)); |
| |
| EXPECT_EQ(0, blob_size_); |
| } |
| |
| } // namespace chromeos_update_engine |