| // |
| // Copyright (C) 2011 The Android Open Source Project |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // |
| |
| #include "update_engine/payload_consumer/download_action.h" |
| |
| #include <errno.h> |
| |
| #include <algorithm> |
| #include <string> |
| #include <vector> |
| |
| #include <base/files/file_path.h> |
| #include <base/strings/stringprintf.h> |
| |
| #include "update_engine/common/action_pipe.h" |
| #include "update_engine/common/boot_control_interface.h" |
| #include "update_engine/common/utils.h" |
| #include "update_engine/omaha_request_params.h" |
| #include "update_engine/p2p_manager.h" |
| #include "update_engine/payload_state_interface.h" |
| |
| using base::FilePath; |
| using std::string; |
| using std::vector; |
| |
| namespace chromeos_update_engine { |
| |
| DownloadAction::DownloadAction(PrefsInterface* prefs, |
| SystemState* system_state, |
| HttpFetcher* http_fetcher) |
| : prefs_(prefs), |
| system_state_(system_state), |
| http_fetcher_(http_fetcher), |
| writer_(nullptr), |
| code_(ErrorCode::kSuccess), |
| delegate_(nullptr), |
| bytes_received_(0), |
| p2p_sharing_fd_(-1), |
| p2p_visible_(true) {} |
| |
| DownloadAction::~DownloadAction() {} |
| |
| void DownloadAction::CloseP2PSharingFd(bool delete_p2p_file) { |
| if (p2p_sharing_fd_ != -1) { |
| if (close(p2p_sharing_fd_) != 0) { |
| PLOG(ERROR) << "Error closing p2p sharing fd"; |
| } |
| p2p_sharing_fd_ = -1; |
| } |
| |
| if (delete_p2p_file) { |
| FilePath path = |
| system_state_->p2p_manager()->FileGetPath(p2p_file_id_); |
| if (unlink(path.value().c_str()) != 0) { |
| PLOG(ERROR) << "Error deleting p2p file " << path.value(); |
| } else { |
| LOG(INFO) << "Deleted p2p file " << path.value(); |
| } |
| } |
| |
| // Don't use p2p from this point onwards. |
| p2p_file_id_.clear(); |
| } |
| |
| bool DownloadAction::SetupP2PSharingFd() { |
| P2PManager *p2p_manager = system_state_->p2p_manager(); |
| |
| if (!p2p_manager->FileShare(p2p_file_id_, install_plan_.payload_size)) { |
| LOG(ERROR) << "Unable to share file via p2p"; |
| CloseP2PSharingFd(true); // delete p2p file |
| return false; |
| } |
| |
| // File has already been created (and allocated, xattrs been |
| // populated etc.) by FileShare() so just open it for writing. |
| FilePath path = p2p_manager->FileGetPath(p2p_file_id_); |
| p2p_sharing_fd_ = open(path.value().c_str(), O_WRONLY); |
| if (p2p_sharing_fd_ == -1) { |
| PLOG(ERROR) << "Error opening file " << path.value(); |
| CloseP2PSharingFd(true); // Delete p2p file. |
| return false; |
| } |
| |
| // Ensure file to share is world-readable, otherwise |
| // p2p-server and p2p-http-server can't access it. |
| // |
| // (Q: Why doesn't the file have mode 0644 already? A: Because |
| // the process-wide umask is set to 0700 in main.cc.) |
| if (fchmod(p2p_sharing_fd_, 0644) != 0) { |
| PLOG(ERROR) << "Error setting mode 0644 on " << path.value(); |
| CloseP2PSharingFd(true); // Delete p2p file. |
| return false; |
| } |
| |
| // All good. |
| LOG(INFO) << "Writing payload contents to " << path.value(); |
| p2p_manager->FileGetVisible(p2p_file_id_, &p2p_visible_); |
| return true; |
| } |
| |
| void DownloadAction::WriteToP2PFile(const void* data, |
| size_t length, |
| off_t file_offset) { |
| if (p2p_sharing_fd_ == -1) { |
| if (!SetupP2PSharingFd()) |
| return; |
| } |
| |
| // Check that the file is at least |file_offset| bytes long - if |
| // it's not something is wrong and we must immediately delete the |
| // file to avoid propagating this problem to other peers. |
| // |
| // How can this happen? It could be that we're resuming an update |
| // after a system crash... in this case, it could be that |
| // |
| // 1. the p2p file didn't get properly synced to stable storage; or |
| // 2. the file was deleted at bootup (it's in /var/cache after all); or |
| // 3. other reasons |
| off_t p2p_size = utils::FileSize(p2p_sharing_fd_); |
| if (p2p_size < 0) { |
| PLOG(ERROR) << "Error getting file status for p2p file"; |
| CloseP2PSharingFd(true); // Delete p2p file. |
| return; |
| } |
| if (p2p_size < file_offset) { |
| LOG(ERROR) << "Wanting to write to file offset " << file_offset |
| << " but existing p2p file is only " << p2p_size |
| << " bytes."; |
| CloseP2PSharingFd(true); // Delete p2p file. |
| return; |
| } |
| |
| off_t cur_file_offset = lseek(p2p_sharing_fd_, file_offset, SEEK_SET); |
| if (cur_file_offset != static_cast<off_t>(file_offset)) { |
| PLOG(ERROR) << "Error seeking to position " |
| << file_offset << " in p2p file"; |
| CloseP2PSharingFd(true); // Delete p2p file. |
| } else { |
| // OK, seeking worked, now write the data |
| ssize_t bytes_written = write(p2p_sharing_fd_, data, length); |
| if (bytes_written != static_cast<ssize_t>(length)) { |
| PLOG(ERROR) << "Error writing " |
| << length << " bytes at file offset " |
| << file_offset << " in p2p file"; |
| CloseP2PSharingFd(true); // Delete p2p file. |
| } |
| } |
| } |
| |
| void DownloadAction::PerformAction() { |
| http_fetcher_->set_delegate(this); |
| |
| // Get the InstallPlan and read it |
| CHECK(HasInputObject()); |
| install_plan_ = GetInputObject(); |
| bytes_received_ = 0; |
| |
| install_plan_.Dump(); |
| |
| LOG(INFO) << "Marking new slot as unbootable"; |
| if (!system_state_->boot_control()->MarkSlotUnbootable( |
| install_plan_.target_slot)) { |
| LOG(WARNING) << "Unable to mark new slot " |
| << BootControlInterface::SlotName(install_plan_.target_slot) |
| << ". Proceeding with the update anyway."; |
| } |
| |
| if (writer_) { |
| LOG(INFO) << "Using writer for test."; |
| } else { |
| delta_performer_.reset(new DeltaPerformer(prefs_, |
| system_state_->boot_control(), |
| system_state_->hardware(), |
| delegate_, |
| &install_plan_)); |
| writer_ = delta_performer_.get(); |
| } |
| download_active_= true; |
| |
| if (system_state_ != nullptr) { |
| const PayloadStateInterface* payload_state = system_state_->payload_state(); |
| string file_id = utils::CalculateP2PFileId(install_plan_.payload_hash, |
| install_plan_.payload_size); |
| if (payload_state->GetUsingP2PForSharing()) { |
| // If we're sharing the update, store the file_id to convey |
| // that we should write to the file. |
| p2p_file_id_ = file_id; |
| LOG(INFO) << "p2p file id: " << p2p_file_id_; |
| } else { |
| // Even if we're not sharing the update, it could be that |
| // there's a partial file from a previous attempt with the same |
| // hash. If this is the case, we NEED to clean it up otherwise |
| // we're essentially timing out other peers downloading from us |
| // (since we're never going to complete the file). |
| FilePath path = system_state_->p2p_manager()->FileGetPath(file_id); |
| if (!path.empty()) { |
| if (unlink(path.value().c_str()) != 0) { |
| PLOG(ERROR) << "Error deleting p2p file " << path.value(); |
| } else { |
| LOG(INFO) << "Deleting partial p2p file " << path.value() |
| << " since we're not using p2p to share."; |
| } |
| } |
| } |
| |
| // Tweak timeouts on the HTTP fetcher if we're downloading from a |
| // local peer. |
| if (payload_state->GetUsingP2PForDownloading() && |
| payload_state->GetP2PUrl() == install_plan_.download_url) { |
| LOG(INFO) << "Tweaking HTTP fetcher since we're downloading via p2p"; |
| http_fetcher_->set_low_speed_limit(kDownloadP2PLowSpeedLimitBps, |
| kDownloadP2PLowSpeedTimeSeconds); |
| http_fetcher_->set_max_retry_count(kDownloadP2PMaxRetryCount); |
| http_fetcher_->set_connect_timeout(kDownloadP2PConnectTimeoutSeconds); |
| } |
| } |
| |
| http_fetcher_->BeginTransfer(install_plan_.download_url); |
| } |
| |
| void DownloadAction::TerminateProcessing() { |
| if (writer_) { |
| writer_->Close(); |
| writer_ = nullptr; |
| } |
| download_active_= false; |
| CloseP2PSharingFd(false); // Keep p2p file. |
| // Terminates the transfer. The action is terminated, if necessary, when the |
| // TransferTerminated callback is received. |
| http_fetcher_->TerminateTransfer(); |
| } |
| |
| void DownloadAction::SeekToOffset(off_t offset) { |
| bytes_received_ = offset; |
| } |
| |
| void DownloadAction::ReceivedBytes(HttpFetcher* fetcher, |
| const void* bytes, |
| size_t length) { |
| // Note that bytes_received_ is the current offset. |
| if (!p2p_file_id_.empty()) { |
| WriteToP2PFile(bytes, length, bytes_received_); |
| } |
| |
| bytes_received_ += length; |
| if (delegate_ && download_active_) { |
| delegate_->BytesReceived( |
| length, bytes_received_, install_plan_.payload_size); |
| } |
| if (writer_ && !writer_->Write(bytes, length, &code_)) { |
| LOG(ERROR) << "Error " << code_ << " in DeltaPerformer's Write method when " |
| << "processing the received payload -- Terminating processing"; |
| // Delete p2p file, if applicable. |
| if (!p2p_file_id_.empty()) |
| CloseP2PSharingFd(true); |
| // Don't tell the action processor that the action is complete until we get |
| // the TransferTerminated callback. Otherwise, this and the HTTP fetcher |
| // objects may get destroyed before all callbacks are complete. |
| TerminateProcessing(); |
| return; |
| } |
| |
| // Call p2p_manager_->FileMakeVisible() when we've successfully |
| // verified the manifest! |
| if (!p2p_visible_ && |
| delta_performer_.get() && delta_performer_->IsManifestValid()) { |
| LOG(INFO) << "Manifest has been validated. Making p2p file visible."; |
| system_state_->p2p_manager()->FileMakeVisible(p2p_file_id_); |
| p2p_visible_ = true; |
| } |
| } |
| |
| void DownloadAction::TransferComplete(HttpFetcher* fetcher, bool successful) { |
| if (writer_) { |
| LOG_IF(WARNING, writer_->Close() != 0) << "Error closing the writer."; |
| writer_ = nullptr; |
| } |
| download_active_= false; |
| ErrorCode code = |
| successful ? ErrorCode::kSuccess : ErrorCode::kDownloadTransferError; |
| if (code == ErrorCode::kSuccess && delta_performer_.get()) { |
| code = delta_performer_->VerifyPayload(install_plan_.payload_hash, |
| install_plan_.payload_size); |
| if (code != ErrorCode::kSuccess) { |
| LOG(ERROR) << "Download of " << install_plan_.download_url |
| << " failed due to payload verification error."; |
| // Delete p2p file, if applicable. |
| if (!p2p_file_id_.empty()) |
| CloseP2PSharingFd(true); |
| } |
| } |
| |
| // Write the path to the output pipe if we're successful. |
| if (code == ErrorCode::kSuccess && HasOutputPipe()) |
| SetOutputObject(install_plan_); |
| processor_->ActionComplete(this, code); |
| } |
| |
| void DownloadAction::TransferTerminated(HttpFetcher *fetcher) { |
| if (code_ != ErrorCode::kSuccess) { |
| processor_->ActionComplete(this, code_); |
| } |
| } |
| |
| } // namespace chromeos_update_engine |