blob: 8343d212805fa2dc475eaea1df7def3322a10f86 [file] [log] [blame]
#!/usr/bin/env python
# -*- coding: utf-8 -*-
#
# Copyright (C) 2015 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
"""payload_info: Show information about an update payload."""
from __future__ import absolute_import
from __future__ import print_function
import argparse
import sys
import textwrap
from six.moves import range
import update_payload
MAJOR_PAYLOAD_VERSION_BRILLO = 2
def DisplayValue(key, value):
"""Print out a key, value pair with values left-aligned."""
if value != None:
print('%-*s %s' % (28, key + ':', value))
else:
raise ValueError('Cannot display an empty value.')
def DisplayHexData(data, indent=0):
"""Print out binary data as a hex values."""
for off in range(0, len(data), 16):
chunk = bytearray(data[off:off + 16])
print(' ' * indent +
' '.join('%.2x' % c for c in chunk) +
' ' * (16 - len(chunk)) +
' | ' +
''.join(chr(c) if 32 <= c < 127 else '.' for c in chunk))
class PayloadCommand(object):
"""Show basic information about an update payload.
This command parses an update payload and displays information from
its header and manifest.
"""
def __init__(self, options):
self.options = options
self.payload = None
def _DisplayHeader(self):
"""Show information from the payload header."""
header = self.payload.header
DisplayValue('Payload version', header.version)
DisplayValue('Manifest length', header.manifest_len)
def _DisplayManifest(self):
"""Show information from the payload manifest."""
manifest = self.payload.manifest
DisplayValue('Number of partitions', len(manifest.partitions))
for partition in manifest.partitions:
DisplayValue(' Number of "%s" ops' % partition.partition_name,
len(partition.operations))
for partition in manifest.partitions:
DisplayValue(" Timestamp for " +
partition.partition_name, partition.version)
for partition in manifest.partitions:
DisplayValue(" COW Size for " +
partition.partition_name, partition.estimate_cow_size)
DisplayValue('Block size', manifest.block_size)
DisplayValue('Minor version', manifest.minor_version)
def _DisplaySignatures(self):
"""Show information about the signatures from the manifest."""
header = self.payload.header
if header.metadata_signature_len:
offset = header.size + header.manifest_len
DisplayValue('Metadata signatures blob',
'file_offset=%d (%d bytes)' %
(offset, header.metadata_signature_len))
# pylint: disable=invalid-unary-operand-type
signatures_blob = self.payload.ReadDataBlob(
-header.metadata_signature_len,
header.metadata_signature_len)
self._DisplaySignaturesBlob('Metadata', signatures_blob)
else:
print('No metadata signatures stored in the payload')
manifest = self.payload.manifest
if manifest.HasField('signatures_offset'):
signature_msg = 'blob_offset=%d' % manifest.signatures_offset
if manifest.signatures_size:
signature_msg += ' (%d bytes)' % manifest.signatures_size
DisplayValue('Payload signatures blob', signature_msg)
signatures_blob = self.payload.ReadDataBlob(manifest.signatures_offset,
manifest.signatures_size)
self._DisplaySignaturesBlob('Payload', signatures_blob)
else:
print('No payload signatures stored in the payload')
@staticmethod
def _DisplaySignaturesBlob(signature_name, signatures_blob):
"""Show information about the signatures blob."""
signatures = update_payload.update_metadata_pb2.Signatures()
signatures.ParseFromString(signatures_blob)
print('%s signatures: (%d entries)' %
(signature_name, len(signatures.signatures)))
for signature in signatures.signatures:
print(' version=%s, hex_data: (%d bytes)' %
(signature.version if signature.HasField('version') else None,
len(signature.data)))
DisplayHexData(signature.data, indent=4)
def _DisplayOps(self, name, operations):
"""Show information about the install operations from the manifest.
The list shown includes operation type, data offset, data length, source
extents, source length, destination extents, and destinations length.
Args:
name: The name you want displayed above the operation table.
operations: The operations object that you want to display information
about.
"""
def _DisplayExtents(extents, name):
"""Show information about extents."""
num_blocks = sum([ext.num_blocks for ext in extents])
ext_str = ' '.join(
'(%s,%s)' % (ext.start_block, ext.num_blocks) for ext in extents)
# Make extent list wrap around at 80 chars.
ext_str = '\n '.join(textwrap.wrap(ext_str, 74))
extent_plural = 's' if len(extents) > 1 else ''
block_plural = 's' if num_blocks > 1 else ''
print(' %s: %d extent%s (%d block%s)' %
(name, len(extents), extent_plural, num_blocks, block_plural))
print(' %s' % ext_str)
op_dict = update_payload.common.OpType.NAMES
print('%s:' % name)
for op_count, op in enumerate(operations):
print(' %d: %s' % (op_count, op_dict[op.type]))
if op.HasField('data_offset'):
print(' Data offset: %s' % op.data_offset)
if op.HasField('data_length'):
print(' Data length: %s' % op.data_length)
if op.src_extents:
_DisplayExtents(op.src_extents, 'Source')
if op.dst_extents:
_DisplayExtents(op.dst_extents, 'Destination')
def _GetStats(self, manifest):
"""Returns various statistics about a payload file.
Returns a dictionary containing the number of blocks read during payload
application, the number of blocks written, and the number of seeks done
when writing during operation application.
"""
read_blocks = 0
written_blocks = 0
num_write_seeks = 0
for partition in manifest.partitions:
last_ext = None
for curr_op in partition.operations:
read_blocks += sum([ext.num_blocks for ext in curr_op.src_extents])
written_blocks += sum([ext.num_blocks for ext in curr_op.dst_extents])
for curr_ext in curr_op.dst_extents:
# See if the extent is contiguous with the last extent seen.
if last_ext and (curr_ext.start_block !=
last_ext.start_block + last_ext.num_blocks):
num_write_seeks += 1
last_ext = curr_ext
# Old and new partitions are read once during verification.
read_blocks += partition.old_partition_info.size // manifest.block_size
read_blocks += partition.new_partition_info.size // manifest.block_size
stats = {'read_blocks': read_blocks,
'written_blocks': written_blocks,
'num_write_seeks': num_write_seeks}
return stats
def _DisplayStats(self, manifest):
stats = self._GetStats(manifest)
DisplayValue('Blocks read', stats['read_blocks'])
DisplayValue('Blocks written', stats['written_blocks'])
DisplayValue('Seeks when writing', stats['num_write_seeks'])
def Run(self):
"""Parse the update payload and display information from it."""
self.payload = update_payload.Payload(self.options.payload_file)
self.payload.Init()
self._DisplayHeader()
self._DisplayManifest()
if self.options.signatures:
self._DisplaySignatures()
if self.options.stats:
self._DisplayStats(self.payload.manifest)
if self.options.list_ops:
print()
for partition in self.payload.manifest.partitions:
self._DisplayOps('%s install operations' % partition.partition_name,
partition.operations)
def main():
parser = argparse.ArgumentParser(
description='Show information about an update payload.')
parser.add_argument('payload_file', type=argparse.FileType('rb'),
help='The update payload file.')
parser.add_argument('--list_ops', default=False, action='store_true',
help='List the install operations and their extents.')
parser.add_argument('--stats', default=False, action='store_true',
help='Show information about overall input/output.')
parser.add_argument('--signatures', default=False, action='store_true',
help='Show signatures stored in the payload.')
args = parser.parse_args()
PayloadCommand(args).Run()
if __name__ == '__main__':
sys.exit(main())