| /* |
| * Copyright (C) 2015 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "Utils.h" |
| |
| #include "Process.h" |
| #include "sehandle.h" |
| |
| #include <android-base/file.h> |
| #include <android-base/logging.h> |
| #include <android-base/properties.h> |
| #include <android-base/strings.h> |
| #include <android-base/stringprintf.h> |
| #include <cutils/fs.h> |
| #include <logwrap/logwrap.h> |
| #include <private/android_filesystem_config.h> |
| |
| #include <mutex> |
| #include <dirent.h> |
| #include <fcntl.h> |
| #include <linux/fs.h> |
| #include <stdlib.h> |
| #include <sys/mount.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <sys/sysmacros.h> |
| #include <sys/wait.h> |
| #include <sys/statvfs.h> |
| |
| #ifndef UMOUNT_NOFOLLOW |
| #define UMOUNT_NOFOLLOW 0x00000008 /* Don't follow symlink on umount */ |
| #endif |
| |
| using android::base::ReadFileToString; |
| using android::base::StringPrintf; |
| |
| namespace android { |
| namespace vold { |
| |
| security_context_t sBlkidContext = nullptr; |
| security_context_t sBlkidUntrustedContext = nullptr; |
| security_context_t sFsckContext = nullptr; |
| security_context_t sFsckUntrustedContext = nullptr; |
| |
| bool sSleepOnUnmount = true; |
| |
| static const char* kBlkidPath = "/system/bin/blkid"; |
| static const char* kKeyPath = "/data/misc/vold"; |
| |
| static const char* kProcFilesystems = "/proc/filesystems"; |
| |
| // Lock used to protect process-level SELinux changes from racing with each |
| // other between multiple threads. |
| static std::mutex kSecurityLock; |
| |
| status_t CreateDeviceNode(const std::string& path, dev_t dev) { |
| std::lock_guard<std::mutex> lock(kSecurityLock); |
| const char* cpath = path.c_str(); |
| status_t res = 0; |
| |
| char* secontext = nullptr; |
| if (sehandle) { |
| if (!selabel_lookup(sehandle, &secontext, cpath, S_IFBLK)) { |
| setfscreatecon(secontext); |
| } |
| } |
| |
| mode_t mode = 0660 | S_IFBLK; |
| if (mknod(cpath, mode, dev) < 0) { |
| if (errno != EEXIST) { |
| PLOG(ERROR) << "Failed to create device node for " << major(dev) |
| << ":" << minor(dev) << " at " << path; |
| res = -errno; |
| } |
| } |
| |
| if (secontext) { |
| setfscreatecon(nullptr); |
| freecon(secontext); |
| } |
| |
| return res; |
| } |
| |
| status_t DestroyDeviceNode(const std::string& path) { |
| const char* cpath = path.c_str(); |
| if (TEMP_FAILURE_RETRY(unlink(cpath))) { |
| return -errno; |
| } else { |
| return OK; |
| } |
| } |
| |
| status_t PrepareDir(const std::string& path, mode_t mode, uid_t uid, gid_t gid) { |
| std::lock_guard<std::mutex> lock(kSecurityLock); |
| const char* cpath = path.c_str(); |
| |
| char* secontext = nullptr; |
| if (sehandle) { |
| if (!selabel_lookup(sehandle, &secontext, cpath, S_IFDIR)) { |
| setfscreatecon(secontext); |
| } |
| } |
| |
| int res = fs_prepare_dir(cpath, mode, uid, gid); |
| |
| if (secontext) { |
| setfscreatecon(nullptr); |
| freecon(secontext); |
| } |
| |
| if (res == 0) { |
| return OK; |
| } else { |
| return -errno; |
| } |
| } |
| |
| status_t ForceUnmount(const std::string& path) { |
| const char* cpath = path.c_str(); |
| if (!umount2(cpath, UMOUNT_NOFOLLOW) || errno == EINVAL || errno == ENOENT) { |
| return OK; |
| } |
| // Apps might still be handling eject request, so wait before |
| // we start sending signals |
| if (sSleepOnUnmount) sleep(5); |
| |
| KillProcessesWithOpenFiles(path, SIGINT); |
| if (sSleepOnUnmount) sleep(5); |
| if (!umount2(cpath, UMOUNT_NOFOLLOW) || errno == EINVAL || errno == ENOENT) { |
| return OK; |
| } |
| |
| KillProcessesWithOpenFiles(path, SIGTERM); |
| if (sSleepOnUnmount) sleep(5); |
| if (!umount2(cpath, UMOUNT_NOFOLLOW) || errno == EINVAL || errno == ENOENT) { |
| return OK; |
| } |
| |
| KillProcessesWithOpenFiles(path, SIGKILL); |
| if (sSleepOnUnmount) sleep(5); |
| if (!umount2(cpath, UMOUNT_NOFOLLOW) || errno == EINVAL || errno == ENOENT) { |
| return OK; |
| } |
| |
| return -errno; |
| } |
| |
| status_t KillProcessesUsingPath(const std::string& path) { |
| if (KillProcessesWithOpenFiles(path, SIGINT) == 0) { |
| return OK; |
| } |
| if (sSleepOnUnmount) sleep(5); |
| |
| if (KillProcessesWithOpenFiles(path, SIGTERM) == 0) { |
| return OK; |
| } |
| if (sSleepOnUnmount) sleep(5); |
| |
| if (KillProcessesWithOpenFiles(path, SIGKILL) == 0) { |
| return OK; |
| } |
| if (sSleepOnUnmount) sleep(5); |
| |
| // Send SIGKILL a second time to determine if we've |
| // actually killed everyone with open files |
| if (KillProcessesWithOpenFiles(path, SIGKILL) == 0) { |
| return OK; |
| } |
| PLOG(ERROR) << "Failed to kill processes using " << path; |
| return -EBUSY; |
| } |
| |
| status_t BindMount(const std::string& source, const std::string& target) { |
| if (::mount(source.c_str(), target.c_str(), "", MS_BIND, NULL)) { |
| PLOG(ERROR) << "Failed to bind mount " << source << " to " << target; |
| return -errno; |
| } |
| return OK; |
| } |
| |
| bool FindValue(const std::string& raw, const std::string& key, std::string* value) { |
| auto qual = key + "=\""; |
| auto start = raw.find(qual); |
| if (start > 0 && raw[start - 1] != ' ') { |
| start = raw.find(qual, start + 1); |
| } |
| |
| if (start == std::string::npos) return false; |
| start += qual.length(); |
| |
| auto end = raw.find("\"", start); |
| if (end == std::string::npos) return false; |
| |
| *value = raw.substr(start, end - start); |
| return true; |
| } |
| |
| static status_t readMetadata(const std::string& path, std::string* fsType, |
| std::string* fsUuid, std::string* fsLabel, bool untrusted) { |
| fsType->clear(); |
| fsUuid->clear(); |
| fsLabel->clear(); |
| |
| std::vector<std::string> cmd; |
| cmd.push_back(kBlkidPath); |
| cmd.push_back("-c"); |
| cmd.push_back("/dev/null"); |
| cmd.push_back("-s"); |
| cmd.push_back("TYPE"); |
| cmd.push_back("-s"); |
| cmd.push_back("UUID"); |
| cmd.push_back("-s"); |
| cmd.push_back("LABEL"); |
| cmd.push_back(path); |
| |
| std::vector<std::string> output; |
| status_t res = ForkExecvp(cmd, output, untrusted ? sBlkidUntrustedContext : sBlkidContext); |
| if (res != OK) { |
| LOG(WARNING) << "blkid failed to identify " << path; |
| return res; |
| } |
| |
| for (const auto& line : output) { |
| // Extract values from blkid output, if defined |
| FindValue(line, "TYPE", fsType); |
| FindValue(line, "UUID", fsUuid); |
| FindValue(line, "LABEL", fsLabel); |
| } |
| |
| return OK; |
| } |
| |
| status_t ReadMetadata(const std::string& path, std::string* fsType, |
| std::string* fsUuid, std::string* fsLabel) { |
| return readMetadata(path, fsType, fsUuid, fsLabel, false); |
| } |
| |
| status_t ReadMetadataUntrusted(const std::string& path, std::string* fsType, |
| std::string* fsUuid, std::string* fsLabel) { |
| return readMetadata(path, fsType, fsUuid, fsLabel, true); |
| } |
| |
| status_t ForkExecvp(const std::vector<std::string>& args) { |
| return ForkExecvp(args, nullptr); |
| } |
| |
| status_t ForkExecvp(const std::vector<std::string>& args, security_context_t context) { |
| std::lock_guard<std::mutex> lock(kSecurityLock); |
| size_t argc = args.size(); |
| char** argv = (char**) calloc(argc, sizeof(char*)); |
| for (size_t i = 0; i < argc; i++) { |
| argv[i] = (char*) args[i].c_str(); |
| if (i == 0) { |
| LOG(VERBOSE) << args[i]; |
| } else { |
| LOG(VERBOSE) << " " << args[i]; |
| } |
| } |
| |
| if (context) { |
| if (setexeccon(context)) { |
| LOG(ERROR) << "Failed to setexeccon"; |
| abort(); |
| } |
| } |
| status_t res = android_fork_execvp(argc, argv, NULL, false, true); |
| if (context) { |
| if (setexeccon(nullptr)) { |
| LOG(ERROR) << "Failed to setexeccon"; |
| abort(); |
| } |
| } |
| |
| free(argv); |
| return res; |
| } |
| |
| status_t ForkExecvp(const std::vector<std::string>& args, |
| std::vector<std::string>& output) { |
| return ForkExecvp(args, output, nullptr); |
| } |
| |
| status_t ForkExecvp(const std::vector<std::string>& args, |
| std::vector<std::string>& output, security_context_t context) { |
| std::lock_guard<std::mutex> lock(kSecurityLock); |
| std::string cmd; |
| for (size_t i = 0; i < args.size(); i++) { |
| cmd += args[i] + " "; |
| if (i == 0) { |
| LOG(VERBOSE) << args[i]; |
| } else { |
| LOG(VERBOSE) << " " << args[i]; |
| } |
| } |
| output.clear(); |
| |
| if (context) { |
| if (setexeccon(context)) { |
| LOG(ERROR) << "Failed to setexeccon"; |
| abort(); |
| } |
| } |
| FILE* fp = popen(cmd.c_str(), "r"); // NOLINT |
| if (context) { |
| if (setexeccon(nullptr)) { |
| LOG(ERROR) << "Failed to setexeccon"; |
| abort(); |
| } |
| } |
| |
| if (!fp) { |
| PLOG(ERROR) << "Failed to popen " << cmd; |
| return -errno; |
| } |
| char line[1024]; |
| while (fgets(line, sizeof(line), fp) != nullptr) { |
| LOG(VERBOSE) << line; |
| output.push_back(std::string(line)); |
| } |
| if (pclose(fp) != 0) { |
| PLOG(ERROR) << "Failed to pclose " << cmd; |
| return -errno; |
| } |
| |
| return OK; |
| } |
| |
| pid_t ForkExecvpAsync(const std::vector<std::string>& args) { |
| size_t argc = args.size(); |
| char** argv = (char**) calloc(argc + 1, sizeof(char*)); |
| for (size_t i = 0; i < argc; i++) { |
| argv[i] = (char*) args[i].c_str(); |
| if (i == 0) { |
| LOG(VERBOSE) << args[i]; |
| } else { |
| LOG(VERBOSE) << " " << args[i]; |
| } |
| } |
| |
| pid_t pid = fork(); |
| if (pid == 0) { |
| close(STDIN_FILENO); |
| close(STDOUT_FILENO); |
| close(STDERR_FILENO); |
| |
| if (execvp(argv[0], argv)) { |
| PLOG(ERROR) << "Failed to exec"; |
| } |
| |
| _exit(1); |
| } |
| |
| if (pid == -1) { |
| PLOG(ERROR) << "Failed to exec"; |
| } |
| |
| free(argv); |
| return pid; |
| } |
| |
| status_t ReadRandomBytes(size_t bytes, std::string& out) { |
| out.resize(bytes); |
| return ReadRandomBytes(bytes, &out[0]); |
| } |
| |
| status_t ReadRandomBytes(size_t bytes, char* buf) { |
| int fd = TEMP_FAILURE_RETRY(open("/dev/urandom", O_RDONLY | O_CLOEXEC | O_NOFOLLOW)); |
| if (fd == -1) { |
| return -errno; |
| } |
| |
| size_t n; |
| while ((n = TEMP_FAILURE_RETRY(read(fd, &buf[0], bytes))) > 0) { |
| bytes -= n; |
| buf += n; |
| } |
| close(fd); |
| |
| if (bytes == 0) { |
| return OK; |
| } else { |
| return -EIO; |
| } |
| } |
| |
| status_t GenerateRandomUuid(std::string& out) { |
| status_t res = ReadRandomBytes(16, out); |
| if (res == OK) { |
| out[6] &= 0x0f; /* clear version */ |
| out[6] |= 0x40; /* set to version 4 */ |
| out[8] &= 0x3f; /* clear variant */ |
| out[8] |= 0x80; /* set to IETF variant */ |
| } |
| return res; |
| } |
| |
| status_t HexToStr(const std::string& hex, std::string& str) { |
| str.clear(); |
| bool even = true; |
| char cur = 0; |
| for (size_t i = 0; i < hex.size(); i++) { |
| int val = 0; |
| switch (hex[i]) { |
| case ' ': case '-': case ':': continue; |
| case 'f': case 'F': val = 15; break; |
| case 'e': case 'E': val = 14; break; |
| case 'd': case 'D': val = 13; break; |
| case 'c': case 'C': val = 12; break; |
| case 'b': case 'B': val = 11; break; |
| case 'a': case 'A': val = 10; break; |
| case '9': val = 9; break; |
| case '8': val = 8; break; |
| case '7': val = 7; break; |
| case '6': val = 6; break; |
| case '5': val = 5; break; |
| case '4': val = 4; break; |
| case '3': val = 3; break; |
| case '2': val = 2; break; |
| case '1': val = 1; break; |
| case '0': val = 0; break; |
| default: return -EINVAL; |
| } |
| |
| if (even) { |
| cur = val << 4; |
| } else { |
| cur += val; |
| str.push_back(cur); |
| cur = 0; |
| } |
| even = !even; |
| } |
| return even ? OK : -EINVAL; |
| } |
| |
| static const char* kLookup = "0123456789abcdef"; |
| |
| status_t StrToHex(const std::string& str, std::string& hex) { |
| hex.clear(); |
| for (size_t i = 0; i < str.size(); i++) { |
| hex.push_back(kLookup[(str[i] & 0xF0) >> 4]); |
| hex.push_back(kLookup[str[i] & 0x0F]); |
| } |
| return OK; |
| } |
| |
| status_t StrToHex(const KeyBuffer& str, KeyBuffer& hex) { |
| hex.clear(); |
| for (size_t i = 0; i < str.size(); i++) { |
| hex.push_back(kLookup[(str.data()[i] & 0xF0) >> 4]); |
| hex.push_back(kLookup[str.data()[i] & 0x0F]); |
| } |
| return OK; |
| } |
| |
| status_t NormalizeHex(const std::string& in, std::string& out) { |
| std::string tmp; |
| if (HexToStr(in, tmp)) { |
| return -EINVAL; |
| } |
| return StrToHex(tmp, out); |
| } |
| |
| uint64_t GetFreeBytes(const std::string& path) { |
| struct statvfs sb; |
| if (statvfs(path.c_str(), &sb) == 0) { |
| return (uint64_t) sb.f_bavail * sb.f_frsize; |
| } else { |
| return -1; |
| } |
| } |
| |
| // TODO: borrowed from frameworks/native/libs/diskusage/ which should |
| // eventually be migrated into system/ |
| static int64_t stat_size(struct stat *s) { |
| int64_t blksize = s->st_blksize; |
| // count actual blocks used instead of nominal file size |
| int64_t size = s->st_blocks * 512; |
| |
| if (blksize) { |
| /* round up to filesystem block size */ |
| size = (size + blksize - 1) & (~(blksize - 1)); |
| } |
| |
| return size; |
| } |
| |
| // TODO: borrowed from frameworks/native/libs/diskusage/ which should |
| // eventually be migrated into system/ |
| int64_t calculate_dir_size(int dfd) { |
| int64_t size = 0; |
| struct stat s; |
| DIR *d; |
| struct dirent *de; |
| |
| d = fdopendir(dfd); |
| if (d == NULL) { |
| close(dfd); |
| return 0; |
| } |
| |
| while ((de = readdir(d))) { |
| const char *name = de->d_name; |
| if (fstatat(dfd, name, &s, AT_SYMLINK_NOFOLLOW) == 0) { |
| size += stat_size(&s); |
| } |
| if (de->d_type == DT_DIR) { |
| int subfd; |
| |
| /* always skip "." and ".." */ |
| if (name[0] == '.') { |
| if (name[1] == 0) |
| continue; |
| if ((name[1] == '.') && (name[2] == 0)) |
| continue; |
| } |
| |
| subfd = openat(dfd, name, O_RDONLY | O_DIRECTORY | O_CLOEXEC); |
| if (subfd >= 0) { |
| size += calculate_dir_size(subfd); |
| } |
| } |
| } |
| closedir(d); |
| return size; |
| } |
| |
| uint64_t GetTreeBytes(const std::string& path) { |
| int dirfd = open(path.c_str(), O_RDONLY | O_DIRECTORY | O_CLOEXEC); |
| if (dirfd < 0) { |
| PLOG(WARNING) << "Failed to open " << path; |
| return -1; |
| } else { |
| return calculate_dir_size(dirfd); |
| } |
| } |
| |
| bool IsFilesystemSupported(const std::string& fsType) { |
| std::string supported; |
| if (!ReadFileToString(kProcFilesystems, &supported)) { |
| PLOG(ERROR) << "Failed to read supported filesystems"; |
| return false; |
| } |
| return supported.find(fsType + "\n") != std::string::npos; |
| } |
| |
| status_t WipeBlockDevice(const std::string& path) { |
| status_t res = -1; |
| const char* c_path = path.c_str(); |
| unsigned long nr_sec = 0; |
| unsigned long long range[2]; |
| |
| int fd = TEMP_FAILURE_RETRY(open(c_path, O_RDWR | O_CLOEXEC)); |
| if (fd == -1) { |
| PLOG(ERROR) << "Failed to open " << path; |
| goto done; |
| } |
| |
| if ((ioctl(fd, BLKGETSIZE, &nr_sec)) == -1) { |
| PLOG(ERROR) << "Failed to determine size of " << path; |
| goto done; |
| } |
| |
| range[0] = 0; |
| range[1] = (unsigned long long) nr_sec * 512; |
| |
| LOG(INFO) << "About to discard " << range[1] << " on " << path; |
| if (ioctl(fd, BLKDISCARD, &range) == 0) { |
| LOG(INFO) << "Discard success on " << path; |
| res = 0; |
| } else { |
| PLOG(ERROR) << "Discard failure on " << path; |
| } |
| |
| done: |
| close(fd); |
| return res; |
| } |
| |
| static bool isValidFilename(const std::string& name) { |
| if (name.empty() || (name == ".") || (name == "..") |
| || (name.find('/') != std::string::npos)) { |
| return false; |
| } else { |
| return true; |
| } |
| } |
| |
| std::string BuildKeyPath(const std::string& partGuid) { |
| return StringPrintf("%s/expand_%s.key", kKeyPath, partGuid.c_str()); |
| } |
| |
| std::string BuildDataSystemLegacyPath(userid_t userId) { |
| return StringPrintf("%s/system/users/%u", BuildDataPath("").c_str(), userId); |
| } |
| |
| std::string BuildDataSystemCePath(userid_t userId) { |
| return StringPrintf("%s/system_ce/%u", BuildDataPath("").c_str(), userId); |
| } |
| |
| std::string BuildDataSystemDePath(userid_t userId) { |
| return StringPrintf("%s/system_de/%u", BuildDataPath("").c_str(), userId); |
| } |
| |
| std::string BuildDataMiscLegacyPath(userid_t userId) { |
| return StringPrintf("%s/misc/user/%u", BuildDataPath("").c_str(), userId); |
| } |
| |
| std::string BuildDataMiscCePath(userid_t userId) { |
| return StringPrintf("%s/misc_ce/%u", BuildDataPath("").c_str(), userId); |
| } |
| |
| std::string BuildDataMiscDePath(userid_t userId) { |
| return StringPrintf("%s/misc_de/%u", BuildDataPath("").c_str(), userId); |
| } |
| |
| // Keep in sync with installd (frameworks/native/cmds/installd/utils.h) |
| std::string BuildDataProfilesDePath(userid_t userId) { |
| return StringPrintf("%s/misc/profiles/cur/%u", BuildDataPath("").c_str(), userId); |
| } |
| |
| std::string BuildDataVendorCePath(userid_t userId) { |
| return StringPrintf("%s/vendor_ce/%u", BuildDataPath("").c_str(), userId); |
| } |
| |
| std::string BuildDataVendorDePath(userid_t userId) { |
| return StringPrintf("%s/vendor_de/%u", BuildDataPath("").c_str(), userId); |
| } |
| |
| std::string BuildDataPath(const std::string& volumeUuid) { |
| // TODO: unify with installd path generation logic |
| if (volumeUuid.empty()) { |
| return "/data"; |
| } else { |
| CHECK(isValidFilename(volumeUuid)); |
| return StringPrintf("/mnt/expand/%s", volumeUuid.c_str()); |
| } |
| } |
| |
| std::string BuildDataMediaCePath(const std::string& volumeUuid, userid_t userId) { |
| // TODO: unify with installd path generation logic |
| std::string data(BuildDataPath(volumeUuid)); |
| return StringPrintf("%s/media/%u", data.c_str(), userId); |
| } |
| |
| std::string BuildDataUserCePath(const std::string& volumeUuid, userid_t userId) { |
| // TODO: unify with installd path generation logic |
| std::string data(BuildDataPath(volumeUuid)); |
| if (volumeUuid.empty() && userId == 0) { |
| std::string legacy = StringPrintf("%s/data", data.c_str()); |
| struct stat sb; |
| if (lstat(legacy.c_str(), &sb) == 0 && S_ISDIR(sb.st_mode)) { |
| /* /data/data is dir, return /data/data for legacy system */ |
| return legacy; |
| } |
| } |
| return StringPrintf("%s/user/%u", data.c_str(), userId); |
| } |
| |
| std::string BuildDataUserDePath(const std::string& volumeUuid, userid_t userId) { |
| // TODO: unify with installd path generation logic |
| std::string data(BuildDataPath(volumeUuid)); |
| return StringPrintf("%s/user_de/%u", data.c_str(), userId); |
| } |
| |
| dev_t GetDevice(const std::string& path) { |
| struct stat sb; |
| if (stat(path.c_str(), &sb)) { |
| PLOG(WARNING) << "Failed to stat " << path; |
| return 0; |
| } else { |
| return sb.st_dev; |
| } |
| } |
| |
| status_t RestoreconRecursive(const std::string& path) { |
| LOG(VERBOSE) << "Starting restorecon of " << path; |
| |
| static constexpr const char* kRestoreconString = "selinux.restorecon_recursive"; |
| |
| android::base::SetProperty(kRestoreconString, ""); |
| android::base::SetProperty(kRestoreconString, path); |
| |
| android::base::WaitForProperty(kRestoreconString, path); |
| |
| LOG(VERBOSE) << "Finished restorecon of " << path; |
| return OK; |
| } |
| |
| bool Readlinkat(int dirfd, const std::string& path, std::string* result) { |
| // Shamelessly borrowed from android::base::Readlink() |
| result->clear(); |
| |
| // Most Linux file systems (ext2 and ext4, say) limit symbolic links to |
| // 4095 bytes. Since we'll copy out into the string anyway, it doesn't |
| // waste memory to just start there. We add 1 so that we can recognize |
| // whether it actually fit (rather than being truncated to 4095). |
| std::vector<char> buf(4095 + 1); |
| while (true) { |
| ssize_t size = readlinkat(dirfd, path.c_str(), &buf[0], buf.size()); |
| // Unrecoverable error? |
| if (size == -1) |
| return false; |
| // It fit! (If size == buf.size(), it may have been truncated.) |
| if (static_cast<size_t>(size) < buf.size()) { |
| result->assign(&buf[0], size); |
| return true; |
| } |
| // Double our buffer and try again. |
| buf.resize(buf.size() * 2); |
| } |
| } |
| |
| bool IsRunningInEmulator() { |
| return android::base::GetBoolProperty("ro.kernel.qemu", false); |
| } |
| |
| } // namespace vold |
| } // namespace android |