| /* |
| * Copyright (C) 2012 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /****************************************************************************** |
| * |
| * The original Work has been changed by NXP. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| * Copyright 2018-2019 NXP |
| * |
| ******************************************************************************/ |
| |
| /* |
| * Tag-reading, tag-writing operations. |
| */ |
| #include "NfcTag.h" |
| |
| #include <android-base/stringprintf.h> |
| #include <base/logging.h> |
| #include <nativehelper/ScopedLocalRef.h> |
| #include <nativehelper/ScopedPrimitiveArray.h> |
| |
| #include "JavaClassConstants.h" |
| #include "nfc_brcm_defs.h" |
| #include "nfc_config.h" |
| #include "phNxpExtns.h" |
| #include "rw_int.h" |
| |
| using android::base::StringPrintf; |
| |
| extern bool nfc_debug_enabled; |
| |
| #if (NXP_EXTNS == TRUE) |
| static void deleteglobaldata(JNIEnv* e); |
| static jobjectArray techActBytes1; |
| int selectedId = 0; |
| static jobjectArray techPollBytes2; |
| #endif |
| |
| /******************************************************************************* |
| ** |
| ** Function: NfcTag |
| ** |
| ** Description: Initialize member variables. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| NfcTag::NfcTag() |
| : mNumTechList(0), |
| #if (NXP_EXTNS == TRUE) |
| mNumDiscNtf (0), |
| mNumDiscTechList (0), |
| mTechListIndex (0), |
| mIsMultiProtocolTag(false), |
| mCashbeeDetected(false), |
| #endif |
| mTechnologyTimeoutsTable(MAX_NUM_TECHNOLOGY), |
| mNativeData(NULL), |
| mIsActivated(false), |
| mActivationState(Idle), |
| mProtocol(NFC_PROTOCOL_UNKNOWN), |
| mtT1tMaxMessageSize(0), |
| mReadCompletedStatus(NFA_STATUS_OK), |
| mLastKovioUidLen(0), |
| mNdefDetectionTimedOut(false), |
| mIsDynamicTagId(false), |
| mPresenceCheckAlgorithm(NFA_RW_PRES_CHK_DEFAULT), |
| mIsFelicaLite(false) { |
| memset(mTechList, 0, sizeof(mTechList)); |
| memset(mTechHandles, 0, sizeof(mTechHandles)); |
| memset(mTechLibNfcTypes, 0, sizeof(mTechLibNfcTypes)); |
| memset(mTechParams, 0, sizeof(mTechParams)); |
| memset(mLastKovioUid, 0, NFC_KOVIO_MAX_LEN); |
| #if (NXP_EXTNS == TRUE) |
| memset(&mActivationParams_t, 0, sizeof(activationParams_t)); |
| #endif |
| memset (&mLastKovioTime, 0, sizeof(timespec)); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: getInstance |
| ** |
| ** Description: Get a reference to the singleton NfcTag object. |
| ** |
| ** Returns: Reference to NfcTag object. |
| ** |
| *******************************************************************************/ |
| NfcTag& NfcTag::getInstance() { |
| static NfcTag tag; |
| return tag; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: initialize |
| ** |
| ** Description: Reset member variables. |
| ** native: Native data. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void NfcTag::initialize(nfc_jni_native_data* native) { |
| mNativeData = native; |
| mIsActivated = false; |
| mActivationState = Idle; |
| mProtocol = NFC_PROTOCOL_UNKNOWN; |
| mNumTechList = 0; |
| #if (NXP_EXTNS == TRUE) |
| mNumDiscNtf = 0; |
| mNumDiscTechList = 0; |
| mTechListIndex = 0; |
| #endif |
| mtT1tMaxMessageSize = 0; |
| mReadCompletedStatus = NFA_STATUS_OK; |
| resetTechnologies(); |
| if (NfcConfig::hasKey(NAME_PRESENCE_CHECK_ALGORITHM)) |
| mPresenceCheckAlgorithm = |
| NfcConfig::getUnsigned(NAME_PRESENCE_CHECK_ALGORITHM); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: abort |
| ** |
| ** Description: Unblock all operations. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void NfcTag::abort() { |
| SyncEventGuard g(mReadCompleteEvent); |
| mReadCompleteEvent.notifyOne(); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: getActivationState |
| ** |
| ** Description: What is the current state: Idle, Sleep, or Activated. |
| ** |
| ** Returns: Idle, Sleep, or Activated. |
| ** |
| *******************************************************************************/ |
| NfcTag::ActivationState NfcTag::getActivationState() { |
| return mActivationState; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: setDeactivationState |
| ** |
| ** Description: Set the current state: Idle or Sleep. |
| ** deactivated: state of deactivation. |
| ** |
| ** Returns: None. |
| ** |
| *******************************************************************************/ |
| void NfcTag::setDeactivationState(tNFA_DEACTIVATED& deactivated) { |
| static const char fn[] = "NfcTag::setDeactivationState"; |
| mActivationState = Idle; |
| mNdefDetectionTimedOut = false; |
| if (deactivated.type == NFA_DEACTIVATE_TYPE_SLEEP) mActivationState = Sleep; |
| DLOG_IF(INFO, nfc_debug_enabled) |
| << StringPrintf("%s: state=%u", fn, mActivationState); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: setActivationState |
| ** |
| ** Description: Set the current state to Active. |
| ** |
| ** Returns: None. |
| ** |
| *******************************************************************************/ |
| void NfcTag::setActivationState() { |
| static const char fn[] = "NfcTag::setActivationState"; |
| mNdefDetectionTimedOut = false; |
| mActivationState = Active; |
| DLOG_IF(INFO, nfc_debug_enabled) |
| << StringPrintf("%s: state=%u", fn, mActivationState); |
| } |
| #if (NXP_EXTNS == TRUE) |
| /******************************************************************************* |
| ** |
| ** Function: resetActivationState |
| ** |
| ** Description: Set the state to InActive due tag lost. |
| ** |
| ** Returns: None. |
| ** |
| *******************************************************************************/ |
| void NfcTag::resetActivationState() { |
| static const char fn[] = "NfcTag::resetActivationState"; |
| mActivationState = InActive; |
| DLOG_IF(INFO, nfc_debug_enabled) |
| << StringPrintf("%s: state=%u", fn, mActivationState); |
| } |
| #endif |
| /******************************************************************************* |
| ** |
| ** Function: isActivated |
| ** |
| ** Description: Is tag activated? |
| ** |
| ** Returns: True if tag is activated. |
| ** |
| *******************************************************************************/ |
| bool NfcTag::isActivated() { return mIsActivated; } |
| |
| /******************************************************************************* |
| ** |
| ** Function: getProtocol |
| ** |
| ** Description: Get the protocol of the current tag. |
| ** |
| ** Returns: Protocol number. |
| ** |
| *******************************************************************************/ |
| tNFC_PROTOCOL NfcTag::getProtocol() { return mProtocol; } |
| |
| /******************************************************************************* |
| ** |
| ** Function TimeDiff |
| ** |
| ** Description Computes time difference in milliseconds. |
| ** |
| ** Returns Time difference in milliseconds |
| ** |
| *******************************************************************************/ |
| uint32_t TimeDiff(timespec start, timespec end) { |
| timespec temp; |
| if ((end.tv_nsec - start.tv_nsec) < 0) { |
| temp.tv_sec = end.tv_sec - start.tv_sec - 1; |
| temp.tv_nsec = 1000000000 + end.tv_nsec - start.tv_nsec; |
| } else { |
| temp.tv_sec = end.tv_sec - start.tv_sec; |
| temp.tv_nsec = end.tv_nsec - start.tv_nsec; |
| } |
| |
| return (temp.tv_sec * 1000) + (temp.tv_nsec / 1000000); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: IsSameKovio |
| ** |
| ** Description: Checks if tag activate is the same (UID) Kovio tag |
| *previously |
| ** activated. This is needed due to a problem with some Kovio |
| ** tags re-activating multiple times. |
| ** activationData: data from activation. |
| ** |
| ** Returns: true if the activation is from the same tag previously |
| ** activated, false otherwise |
| ** |
| *******************************************************************************/ |
| bool NfcTag::IsSameKovio(tNFA_ACTIVATED& activationData) { |
| static const char fn[] = "NfcTag::IsSameKovio"; |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: enter", fn); |
| tNFC_ACTIVATE_DEVT& rfDetail = activationData.activate_ntf; |
| |
| if (rfDetail.protocol != NFC_PROTOCOL_KOVIO) return false; |
| |
| memcpy(&(mTechParams[0]), &(rfDetail.rf_tech_param), |
| sizeof(rfDetail.rf_tech_param)); |
| if (mTechParams[0].mode != NFC_DISCOVERY_TYPE_POLL_KOVIO) return false; |
| |
| struct timespec now; |
| clock_gettime(CLOCK_REALTIME, &now); |
| |
| bool rVal = false; |
| if (mTechParams[0].param.pk.uid_len == mLastKovioUidLen) { |
| if (memcmp(mLastKovioUid, &mTechParams[0].param.pk.uid, |
| mTechParams[0].param.pk.uid_len) == 0) { |
| // same tag |
| if (TimeDiff(mLastKovioTime, now) < 500) { |
| // same tag within 500 ms, ignore activation |
| rVal = true; |
| } |
| } |
| } |
| |
| // save Kovio tag info |
| if (!rVal) { |
| if ((mLastKovioUidLen = mTechParams[0].param.pk.uid_len) > |
| NFC_KOVIO_MAX_LEN) |
| mLastKovioUidLen = NFC_KOVIO_MAX_LEN; |
| memcpy(mLastKovioUid, mTechParams[0].param.pk.uid, mLastKovioUidLen); |
| } |
| mLastKovioTime = now; |
| DLOG_IF(INFO, nfc_debug_enabled) |
| << StringPrintf("%s: exit, is same Kovio=%d", fn, rVal); |
| return rVal; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: discoverTechnologies |
| ** |
| ** Description: Discover the technologies that NFC service needs by |
| *interpreting |
| ** the data structures from the stack. |
| ** activationData: data from activation. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void NfcTag::discoverTechnologies(tNFA_ACTIVATED& activationData) { |
| static const char fn[] = "NfcTag::discoverTechnologies (activation)"; |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: enter", fn); |
| tNFC_ACTIVATE_DEVT& rfDetail = activationData.activate_ntf; |
| #if (NXP_EXTNS == TRUE) |
| mNumTechList = mTechListIndex; |
| #else |
| mNumTechList = 0; |
| #endif |
| |
| mTechHandles[mNumTechList] = rfDetail.rf_disc_id; |
| mTechLibNfcTypes[mNumTechList] = rfDetail.protocol; |
| |
| // save the stack's data structure for interpretation later |
| memcpy(&(mTechParams[mNumTechList]), &(rfDetail.rf_tech_param), |
| sizeof(rfDetail.rf_tech_param)); |
| |
| if (NFC_PROTOCOL_T1T == rfDetail.protocol) { |
| mTechList[mNumTechList] = |
| TARGET_TYPE_ISO14443_3A; // is TagTechnology.NFC_A by Java API |
| } else if (NFC_PROTOCOL_T2T == rfDetail.protocol) { |
| mTechList[mNumTechList] = |
| TARGET_TYPE_ISO14443_3A; // is TagTechnology.NFC_A by Java API |
| // could be MifFare UL or Classic or Kovio |
| { |
| // need to look at first byte of uid to find Manufacture Byte |
| tNFC_RF_TECH_PARAMS tech_params; |
| memcpy(&tech_params, &(rfDetail.rf_tech_param), |
| sizeof(rfDetail.rf_tech_param)); |
| |
| if ((tech_params.param.pa.nfcid1[0] == 0x04 && |
| rfDetail.rf_tech_param.param.pa.sel_rsp == 0) || |
| rfDetail.rf_tech_param.param.pa.sel_rsp == 0x18 || |
| rfDetail.rf_tech_param.param.pa.sel_rsp == 0x08) { |
| if (rfDetail.rf_tech_param.param.pa.sel_rsp == 0) { |
| mNumTechList++; |
| mTechHandles[mNumTechList] = rfDetail.rf_disc_id; |
| mTechLibNfcTypes[mNumTechList] = rfDetail.protocol; |
| // save the stack's data structure for interpretation later |
| memcpy(&(mTechParams[mNumTechList]), &(rfDetail.rf_tech_param), |
| sizeof(rfDetail.rf_tech_param)); |
| mTechList[mNumTechList] = |
| TARGET_TYPE_MIFARE_UL; // is TagTechnology.MIFARE_ULTRALIGHT by |
| // Java API |
| } |
| } |
| } |
| } |
| #if (NXP_EXTNS == TRUE) |
| else if(NFC_PROTOCOL_T3BT == rfDetail.protocol) { |
| mTechHandles [mNumTechList] = rfDetail.rf_disc_id; |
| mTechLibNfcTypes [mNumTechList] = rfDetail.protocol; |
| mTechList [mNumTechList] = TARGET_TYPE_ISO14443_3B; //is TagTechnology.NFC_B by Java API |
| //save the stack's data structure for interpretation later |
| memcpy (&(mTechParams[mNumTechList]), &(rfDetail.rf_tech_param), sizeof(rfDetail.rf_tech_param)); |
| } |
| #endif |
| else if (NFC_PROTOCOL_T3T == rfDetail.protocol) { |
| uint8_t xx = 0; |
| |
| mTechList[mNumTechList] = TARGET_TYPE_FELICA; |
| |
| // see if it is Felica Lite. |
| while (xx < activationData.params.t3t.num_system_codes) { |
| if (activationData.params.t3t.p_system_codes[xx++] == |
| T3T_SYSTEM_CODE_FELICA_LITE) { |
| mIsFelicaLite = true; |
| break; |
| } |
| } |
| } else if (NFC_PROTOCOL_ISO_DEP == rfDetail.protocol) { |
| // type-4 tag uses technology ISO-DEP and technology A or B |
| mTechList[mNumTechList] = |
| TARGET_TYPE_ISO14443_4; // is TagTechnology.ISO_DEP by Java API |
| #if (NXP_EXTNS == TRUE) |
| if((rfDetail.rf_tech_param.mode == NFC_DISCOVERY_TYPE_POLL_A) || |
| (rfDetail.rf_tech_param.mode == NFC_DISCOVERY_TYPE_POLL_A_ACTIVE)) { |
| double fc = 13560000; |
| uint8_t fwi = rfDetail.intf_param.intf_param.pa_iso.fwi; |
| if ((int8_t)fwi >= MIN_FWI && fwi <= MAX_FWI) { |
| double fwt = (((1 << fwi) * 256 * 16) / fc) * 1000; |
| double iso_timeout = RETRY_COUNT*fwt; |
| if (iso_timeout < MIN_TRANSCEIVE_TIMEOUT_IN_MILLISEC) |
| iso_timeout = MIN_TRANSCEIVE_TIMEOUT_IN_MILLISEC; |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf( |
| "Setting the Xceive timeout = %f, fwi = %0#x, fwt = %f", iso_timeout, fwi, fwt); |
| setTransceiveTimeout(mTechList[mNumTechList], iso_timeout); |
| } |
| } |
| #endif |
| if ((rfDetail.rf_tech_param.mode == NFC_DISCOVERY_TYPE_POLL_A) || |
| (rfDetail.rf_tech_param.mode == NFC_DISCOVERY_TYPE_POLL_A_ACTIVE) || |
| (rfDetail.rf_tech_param.mode == NFC_DISCOVERY_TYPE_LISTEN_A) || |
| (rfDetail.rf_tech_param.mode == NFC_DISCOVERY_TYPE_LISTEN_A_ACTIVE)) { |
| mNumTechList++; |
| mTechHandles[mNumTechList] = rfDetail.rf_disc_id; |
| mTechLibNfcTypes[mNumTechList] = rfDetail.protocol; |
| mTechList[mNumTechList] = |
| TARGET_TYPE_ISO14443_3A; // is TagTechnology.NFC_A by Java API |
| // save the stack's data structure for interpretation later |
| memcpy(&(mTechParams[mNumTechList]), &(rfDetail.rf_tech_param), |
| sizeof(rfDetail.rf_tech_param)); |
| } else if ((rfDetail.rf_tech_param.mode == NFC_DISCOVERY_TYPE_POLL_B) || |
| (rfDetail.rf_tech_param.mode == |
| NFC_DISCOVERY_TYPE_POLL_B_PRIME) || |
| (rfDetail.rf_tech_param.mode == NFC_DISCOVERY_TYPE_LISTEN_B) || |
| (rfDetail.rf_tech_param.mode == |
| NFC_DISCOVERY_TYPE_LISTEN_B_PRIME)) { |
| mNumTechList++; |
| mTechHandles[mNumTechList] = rfDetail.rf_disc_id; |
| mTechLibNfcTypes[mNumTechList] = rfDetail.protocol; |
| mTechList[mNumTechList] = |
| TARGET_TYPE_ISO14443_3B; // is TagTechnology.NFC_B by Java API |
| // save the stack's data structure for interpretation later |
| memcpy(&(mTechParams[mNumTechList]), &(rfDetail.rf_tech_param), |
| sizeof(rfDetail.rf_tech_param)); |
| } |
| } else if (NFC_PROTOCOL_T5T == rfDetail.protocol) { |
| // is TagTechnology.NFC_V by Java API |
| mTechList[mNumTechList] = TARGET_TYPE_V; |
| } else if (NFC_PROTOCOL_KOVIO == rfDetail.protocol) { |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: Kovio", fn); |
| mTechList[mNumTechList] = TARGET_TYPE_KOVIO_BARCODE; |
| } else if (NFC_PROTOCOL_MIFARE == rfDetail.protocol) { |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: Mifare Classic", fn); |
| EXTNS_MfcInit(activationData); |
| mTechList[mNumTechList] = |
| TARGET_TYPE_ISO14443_3A; // is TagTechnology.NFC_A by Java API |
| mNumTechList++; |
| mTechHandles[mNumTechList] = rfDetail.rf_disc_id; |
| mTechLibNfcTypes[mNumTechList] = rfDetail.protocol; |
| // save the stack's data structure for interpretation later |
| memcpy(&(mTechParams[mNumTechList]), &(rfDetail.rf_tech_param), |
| sizeof(rfDetail.rf_tech_param)); |
| mTechList[mNumTechList] = |
| TARGET_TYPE_MIFARE_CLASSIC; // is TagTechnology.MIFARE_CLASSIC by Java |
| // API |
| } else { |
| LOG(ERROR) << StringPrintf("%s: unknown protocol ????", fn); |
| mTechList[mNumTechList] = TARGET_TYPE_UNKNOWN; |
| } |
| |
| mNumTechList++; |
| for (int i = 0; i < mNumTechList; i++) { |
| DLOG_IF(INFO, nfc_debug_enabled) |
| << StringPrintf("%s: index=%d; tech=%d; handle=%d; nfc type=%d", fn, i, |
| mTechList[i], mTechHandles[i], mTechLibNfcTypes[i]); |
| } |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: exit", fn); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: discoverTechnologies |
| ** |
| ** Description: Discover the technologies that NFC service needs by |
| *interpreting |
| ** the data structures from the stack. |
| ** discoveryData: data from discovery events(s). |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void NfcTag::discoverTechnologies(tNFA_DISC_RESULT& discoveryData) { |
| static const char fn[] = "NfcTag::discoverTechnologies (discovery)"; |
| tNFC_RESULT_DEVT& discovery_ntf = discoveryData.discovery_ntf; |
| |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf( |
| "%s: enter: rf disc. id=%u; protocol=%u, mNumTechList=%u", fn, |
| discovery_ntf.rf_disc_id, discovery_ntf.protocol, mNumTechList); |
| if (mNumTechList >= MAX_NUM_TECHNOLOGY) { |
| LOG(ERROR) << StringPrintf("%s: exceed max=%d", fn, MAX_NUM_TECHNOLOGY); |
| goto TheEnd; |
| } |
| mTechHandles[mNumTechList] = discovery_ntf.rf_disc_id; |
| mTechLibNfcTypes[mNumTechList] = discovery_ntf.protocol; |
| |
| // save the stack's data structure for interpretation later |
| memcpy(&(mTechParams[mNumTechList]), &(discovery_ntf.rf_tech_param), |
| sizeof(discovery_ntf.rf_tech_param)); |
| |
| if (NFC_PROTOCOL_T1T == discovery_ntf.protocol) { |
| mTechList[mNumTechList] = |
| TARGET_TYPE_ISO14443_3A; // is TagTechnology.NFC_A by Java API |
| } else if (NFC_PROTOCOL_T2T == discovery_ntf.protocol) { |
| mTechList[mNumTechList] = |
| TARGET_TYPE_ISO14443_3A; // is TagTechnology.NFC_A by Java API |
| // type-2 tags are identical to Mifare Ultralight, so Ultralight is also |
| // discovered |
| if ((discovery_ntf.rf_tech_param.param.pa.sel_rsp == 0) && |
| (mNumTechList < (MAX_NUM_TECHNOLOGY - 1))) { |
| // Mifare Ultralight |
| mNumTechList++; |
| mTechHandles[mNumTechList] = discovery_ntf.rf_disc_id; |
| mTechLibNfcTypes[mNumTechList] = discovery_ntf.protocol; |
| mTechList[mNumTechList] = |
| TARGET_TYPE_MIFARE_UL; // is TagTechnology.MIFARE_ULTRALIGHT by Java |
| // API |
| } |
| |
| // save the stack's data structure for interpretation later |
| memcpy(&(mTechParams[mNumTechList]), &(discovery_ntf.rf_tech_param), |
| sizeof(discovery_ntf.rf_tech_param)); |
| } else if (NFC_PROTOCOL_T3T == discovery_ntf.protocol) { |
| mTechList[mNumTechList] = TARGET_TYPE_FELICA; |
| } else if (NFC_PROTOCOL_ISO_DEP == discovery_ntf.protocol) { |
| // type-4 tag uses technology ISO-DEP and technology A or B |
| mTechList[mNumTechList] = |
| TARGET_TYPE_ISO14443_4; // is TagTechnology.ISO_DEP by Java API |
| if ((discovery_ntf.rf_tech_param.mode == NFC_DISCOVERY_TYPE_POLL_A) || |
| (discovery_ntf.rf_tech_param.mode == |
| NFC_DISCOVERY_TYPE_POLL_A_ACTIVE) || |
| (discovery_ntf.rf_tech_param.mode == NFC_DISCOVERY_TYPE_LISTEN_A) || |
| (discovery_ntf.rf_tech_param.mode == |
| NFC_DISCOVERY_TYPE_LISTEN_A_ACTIVE)) { |
| if (mNumTechList < (MAX_NUM_TECHNOLOGY - 1)) { |
| mNumTechList++; |
| mTechHandles[mNumTechList] = discovery_ntf.rf_disc_id; |
| mTechLibNfcTypes[mNumTechList] = discovery_ntf.protocol; |
| mTechList[mNumTechList] = |
| TARGET_TYPE_ISO14443_3A; // is TagTechnology.NFC_A by Java API |
| // save the stack's data structure for interpretation later |
| memcpy(&(mTechParams[mNumTechList]), &(discovery_ntf.rf_tech_param), |
| sizeof(discovery_ntf.rf_tech_param)); |
| } |
| } else if ((discovery_ntf.rf_tech_param.mode == |
| NFC_DISCOVERY_TYPE_POLL_B) || |
| (discovery_ntf.rf_tech_param.mode == |
| NFC_DISCOVERY_TYPE_POLL_B_PRIME) || |
| (discovery_ntf.rf_tech_param.mode == |
| NFC_DISCOVERY_TYPE_LISTEN_B) || |
| (discovery_ntf.rf_tech_param.mode == |
| NFC_DISCOVERY_TYPE_LISTEN_B_PRIME)) { |
| if (mNumTechList < (MAX_NUM_TECHNOLOGY - 1)) { |
| mNumTechList++; |
| mTechHandles[mNumTechList] = discovery_ntf.rf_disc_id; |
| mTechLibNfcTypes[mNumTechList] = discovery_ntf.protocol; |
| mTechList[mNumTechList] = |
| TARGET_TYPE_ISO14443_3B; // is TagTechnology.NFC_B by Java API |
| // save the stack's data structure for interpretation later |
| memcpy(&(mTechParams[mNumTechList]), &(discovery_ntf.rf_tech_param), |
| sizeof(discovery_ntf.rf_tech_param)); |
| } |
| } |
| } else if (NFC_PROTOCOL_T5T == discovery_ntf.protocol) { |
| // is TagTechnology.NFC_V by Java API |
| mTechList[mNumTechList] = TARGET_TYPE_V; |
| } else if (NFC_PROTOCOL_MIFARE == discovery_ntf.protocol) { |
| mTechList[mNumTechList] = TARGET_TYPE_MIFARE_CLASSIC; |
| if (mNumTechList < (MAX_NUM_TECHNOLOGY - 1)) { |
| mNumTechList++; |
| mTechHandles[mNumTechList] = discovery_ntf.rf_disc_id; |
| mTechLibNfcTypes[mNumTechList] = discovery_ntf.protocol; |
| mTechList[mNumTechList] = TARGET_TYPE_ISO14443_3A; |
| // save the stack's data structure for interpretation later |
| memcpy(&(mTechParams[mNumTechList]), &(discovery_ntf.rf_tech_param), |
| sizeof(discovery_ntf.rf_tech_param)); |
| } |
| } else { |
| LOG(ERROR) << StringPrintf("%s: unknown protocol ????", fn); |
| mTechList[mNumTechList] = TARGET_TYPE_UNKNOWN; |
| } |
| |
| mNumTechList++; |
| if (discovery_ntf.more != NCI_DISCOVER_NTF_MORE) { |
| for (int i = 0; i < mNumTechList; i++) { |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf( |
| "%s: index=%d; tech=%d; handle=%d; nfc type=%d", fn, i, mTechList[i], |
| mTechHandles[i], mTechLibNfcTypes[i]); |
| } |
| } |
| #if (NXP_EXTNS == TRUE) |
| mNumDiscTechList = mNumTechList; |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s; mNumDiscTechList=%x", fn, mNumDiscTechList); |
| #endif |
| |
| TheEnd: |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: exit", fn); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: createNativeNfcTag |
| ** |
| ** Description: Create a brand new Java NativeNfcTag object; |
| ** fill the objects's member variables with data; |
| ** notify NFC service; |
| ** activationData: data from activation. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void NfcTag::createNativeNfcTag(tNFA_ACTIVATED& activationData) { |
| static const char fn[] = "NfcTag::createNativeNfcTag"; |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: enter", fn); |
| |
| JNIEnv* e = NULL; |
| ScopedAttach attach(mNativeData->vm, &e); |
| if (e == NULL) { |
| LOG(ERROR) << StringPrintf("%s: jni env is null", fn); |
| return; |
| } |
| |
| ScopedLocalRef<jclass> tag_cls(e, |
| e->GetObjectClass(mNativeData->cached_NfcTag)); |
| if (e->ExceptionCheck()) { |
| e->ExceptionClear(); |
| LOG(ERROR) << StringPrintf("%s: failed to get class", fn); |
| return; |
| } |
| |
| // create a new Java NativeNfcTag object |
| jmethodID ctor = e->GetMethodID(tag_cls.get(), "<init>", "()V"); |
| ScopedLocalRef<jobject> tag(e, e->NewObject(tag_cls.get(), ctor)); |
| |
| // fill NativeNfcTag's mProtocols, mTechList, mTechHandles, mTechLibNfcTypes |
| fillNativeNfcTagMembers1(e, tag_cls.get(), tag.get()); |
| |
| // fill NativeNfcTag's members: mHandle, mConnectedTechnology |
| fillNativeNfcTagMembers2(e, tag_cls.get(), tag.get(), activationData); |
| |
| // fill NativeNfcTag's members: mTechPollBytes |
| fillNativeNfcTagMembers3(e, tag_cls.get(), tag.get(), activationData); |
| |
| // fill NativeNfcTag's members: mTechActBytes |
| fillNativeNfcTagMembers4(e, tag_cls.get(), tag.get(), activationData); |
| |
| // fill NativeNfcTag's members: mUid |
| fillNativeNfcTagMembers5(e, tag_cls.get(), tag.get(), activationData); |
| |
| if (mNativeData->tag != NULL) { |
| e->DeleteGlobalRef(mNativeData->tag); |
| } |
| mNativeData->tag = e->NewGlobalRef(tag.get()); |
| |
| // notify NFC service about this new tag |
| #if (NXP_EXTNS == TRUE) |
| DLOG_IF(ERROR, nfc_debug_enabled) << StringPrintf("%s; mNumDiscNtf=%x", fn,mNumDiscNtf); |
| if(!mNumDiscNtf || NfcTag::getInstance().checkNextValidProtocol() == -1) { |
| mNumDiscNtf = 0; |
| DLOG_IF(INFO, nfc_debug_enabled) |
| << StringPrintf("%s: try notify nfc service", fn); |
| storeActivationParams(); |
| e->CallVoidMethod(mNativeData->manager, android::gCachedNfcManagerNotifyNdefMessageListeners, |
| tag.get()); |
| #else |
| DLOG_IF(INFO, nfc_debug_enabled) |
| << StringPrintf("%s: try notify nfc service", fn); |
| |
| e->CallVoidMethod(mNativeData->manager, |
| android::gCachedNfcManagerNotifyNdefMessageListeners, |
| tag.get()); |
| #endif |
| if (e->ExceptionCheck()) { |
| e->ExceptionClear(); |
| LOG(ERROR) << StringPrintf("%s: fail notify nfc service", fn); |
| } |
| #if (NXP_EXTNS == TRUE) |
| deleteglobaldata(e); |
| } else { |
| DLOG_IF(ERROR, nfc_debug_enabled) << StringPrintf("%s: Selecting next tag", fn); |
| } |
| #endif |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: exit", fn); |
| } |
| |
| #if (NXP_EXTNS == TRUE) |
| /******************************************************************************* |
| ** |
| ** Function: isCashBeeActivated |
| ** |
| ** Description: checks if cashbee tag is detected |
| ** |
| ** Returns: True if tag is activated. |
| ** |
| *******************************************************************************/ |
| bool NfcTag::isCashBeeActivated() { return mCashbeeDetected; } |
| |
| /******************************************************************************* |
| ** |
| ** Function: deleteglobaldata |
| ** |
| ** Description: Deletes the global data reference after notifying to service |
| ** e: JVM environment. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| static void deleteglobaldata(JNIEnv* e) { |
| static const char fn [] = "deleteglobaldata"; |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: enter", fn); |
| if( techActBytes1 != NULL) { |
| e->DeleteGlobalRef(techActBytes1); |
| } |
| if(techPollBytes2 != NULL) { |
| e->DeleteGlobalRef(techPollBytes2); |
| } |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: exit", fn); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: storeActivationParams |
| ** |
| ** Description: stores tag activation parameters for backup |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void NfcTag::storeActivationParams() { |
| static const char fn [] = "NfcTag::storeActivationParams"; |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s", fn); |
| mActivationParams_t.mTechParams = mTechParams[0].mode; |
| mActivationParams_t.mTechLibNfcTypes = mTechLibNfcTypes [0]; |
| } |
| #endif |
| |
| /******************************************************************************* |
| ** |
| ** Function: fillNativeNfcTagMembers1 |
| ** |
| ** Description: Fill NativeNfcTag's members: mProtocols, mTechList, |
| *mTechHandles, mTechLibNfcTypes. |
| ** e: JVM environment. |
| ** tag_cls: Java NativeNfcTag class. |
| ** tag: Java NativeNfcTag object. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void NfcTag::fillNativeNfcTagMembers1(JNIEnv* e, jclass tag_cls, jobject tag) { |
| static const char fn[] = "NfcTag::fillNativeNfcTagMembers1"; |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s", fn); |
| |
| // create objects that represent NativeNfcTag's member variables |
| ScopedLocalRef<jintArray> techList(e, e->NewIntArray(mNumTechList)); |
| ScopedLocalRef<jintArray> handleList(e, e->NewIntArray(mNumTechList)); |
| ScopedLocalRef<jintArray> typeList(e, e->NewIntArray(mNumTechList)); |
| |
| { |
| ScopedIntArrayRW technologies(e, techList.get()); |
| ScopedIntArrayRW handles(e, handleList.get()); |
| ScopedIntArrayRW types(e, typeList.get()); |
| for (int i = 0; i < mNumTechList; i++) { |
| mNativeData->tProtocols[i] = mTechLibNfcTypes[i]; |
| mNativeData->handles[i] = mTechHandles[i]; |
| technologies[i] = mTechList[i]; |
| handles[i] = mTechHandles[i]; |
| types[i] = mTechLibNfcTypes[i]; |
| } |
| } |
| |
| jfieldID f = NULL; |
| |
| f = e->GetFieldID(tag_cls, "mTechList", "[I"); |
| e->SetObjectField(tag, f, techList.get()); |
| |
| f = e->GetFieldID(tag_cls, "mTechHandles", "[I"); |
| e->SetObjectField(tag, f, handleList.get()); |
| |
| f = e->GetFieldID(tag_cls, "mTechLibNfcTypes", "[I"); |
| e->SetObjectField(tag, f, typeList.get()); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: fillNativeNfcTagMembers2 |
| ** |
| ** Description: Fill NativeNfcTag's members: mConnectedTechIndex or |
| *mConnectedTechnology. |
| ** The original Google's implementation is in |
| *set_target_pollBytes( |
| ** in com_android_nfc_NativeNfcTag.cpp; |
| ** e: JVM environment. |
| ** tag_cls: Java NativeNfcTag class. |
| ** tag: Java NativeNfcTag object. |
| ** activationData: data from activation. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void NfcTag::fillNativeNfcTagMembers2(JNIEnv* e, jclass tag_cls, jobject tag, |
| tNFA_ACTIVATED& /*activationData*/) { |
| static const char fn[] = "NfcTag::fillNativeNfcTagMembers2"; |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s", fn); |
| jfieldID f = e->GetFieldID(tag_cls, "mConnectedTechIndex", "I"); |
| e->SetIntField(tag, f, (jint)0); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: fillNativeNfcTagMembers3 |
| ** |
| ** Description: Fill NativeNfcTag's members: mTechPollBytes. |
| ** The original Google's implementation is in |
| *set_target_pollBytes( |
| ** in com_android_nfc_NativeNfcTag.cpp; |
| ** e: JVM environment. |
| ** tag_cls: Java NativeNfcTag class. |
| ** tag: Java NativeNfcTag object. |
| ** activationData: data from activation. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void NfcTag::fillNativeNfcTagMembers3(JNIEnv* e, jclass tag_cls, jobject tag, |
| tNFA_ACTIVATED& activationData) { |
| static const char fn[] = "NfcTag::fillNativeNfcTagMembers3"; |
| ScopedLocalRef<jbyteArray> pollBytes(e, e->NewByteArray(0)); |
| ScopedLocalRef<jclass> byteArrayClass(e, e->GetObjectClass(pollBytes.get())); |
| ScopedLocalRef<jobjectArray> techPollBytes( |
| e, e->NewObjectArray(mNumTechList, byteArrayClass.get(), 0)); |
| int len = 0; |
| #if (NXP_EXTNS == TRUE) |
| jobject obj1; |
| if(mTechListIndex == 0) { |
| techPollBytes2= reinterpret_cast<jobjectArray>(e->NewGlobalRef(techPollBytes.get())); |
| } else { |
| for(int j=0;j<mTechListIndex;j++) { |
| obj1 = e->GetObjectArrayElement(techPollBytes2,j); |
| e->SetObjectArrayElement(techPollBytes.get(),j,obj1); |
| } |
| } |
| |
| for (int i = mTechListIndex; i < mNumTechList; i++) { |
| #else |
| for (int i = 0; i < mNumTechList; i++) { |
| #endif |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf( |
| "%s: index=%d; rf tech params mode=%u", fn, i, mTechParams[i].mode); |
| if (NFC_DISCOVERY_TYPE_POLL_A == mTechParams[i].mode || |
| NFC_DISCOVERY_TYPE_POLL_A_ACTIVE == mTechParams[i].mode || |
| NFC_DISCOVERY_TYPE_LISTEN_A == mTechParams[i].mode || |
| NFC_DISCOVERY_TYPE_LISTEN_A_ACTIVE == mTechParams[i].mode) { |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: tech A", fn); |
| pollBytes.reset(e->NewByteArray(2)); |
| e->SetByteArrayRegion(pollBytes.get(), 0, 2, |
| (jbyte*)mTechParams[i].param.pa.sens_res); |
| } else if (NFC_DISCOVERY_TYPE_POLL_B == mTechParams[i].mode || |
| NFC_DISCOVERY_TYPE_POLL_B_PRIME == mTechParams[i].mode || |
| NFC_DISCOVERY_TYPE_LISTEN_B == mTechParams[i].mode || |
| NFC_DISCOVERY_TYPE_LISTEN_B_PRIME == mTechParams[i].mode) { |
| if (mTechList[i] == |
| TARGET_TYPE_ISO14443_3B) // is TagTechnology.NFC_B by Java API |
| { |
| /***************** |
| see NFC Forum Digital Protocol specification; section 5.6.2; |
| in SENSB_RES response, byte 6 through 9 is Application Data, byte 10-12 |
| or 13 is Protocol Info; used by public API: NfcB.getApplicationData(), |
| NfcB.getProtocolInfo(); |
| *****************/ |
| DLOG_IF(INFO, nfc_debug_enabled) |
| << StringPrintf("%s: tech B; TARGET_TYPE_ISO14443_3B", fn); |
| len = mTechParams[i].param.pb.sensb_res_len; |
| len = len - 4; // subtract 4 bytes for NFCID0 at byte 2 through 5 |
| pollBytes.reset(e->NewByteArray(len)); |
| e->SetByteArrayRegion(pollBytes.get(), 0, len, |
| (jbyte*)(mTechParams[i].param.pb.sensb_res + 4)); |
| } else { |
| pollBytes.reset(e->NewByteArray(0)); |
| } |
| } else if (NFC_DISCOVERY_TYPE_POLL_F == mTechParams[i].mode || |
| NFC_DISCOVERY_TYPE_POLL_F_ACTIVE == mTechParams[i].mode || |
| NFC_DISCOVERY_TYPE_LISTEN_F == mTechParams[i].mode || |
| NFC_DISCOVERY_TYPE_LISTEN_F_ACTIVE == mTechParams[i].mode) { |
| /**************** |
| see NFC Forum Type 3 Tag Operation Specification; sections 2.3.2, 2.3.1.2; |
| see NFC Forum Digital Protocol Specification; sections 6.6.2; |
| PMm: manufacture parameter; 8 bytes; |
| System Code: 2 bytes; |
| ****************/ |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: tech F", fn); |
| uint8_t result[10]; // return result to NFC service |
| memset(result, 0, sizeof(result)); |
| len = 10; |
| |
| /**** |
| for (int ii = 0; ii < mTechParams [i].param.pf.sensf_res_len; ii++) |
| { |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: tech F, |
| sendf_res[%d]=%d (0x%x)", fn, ii, mTechParams |
| [i].param.pf.sensf_res[ii],mTechParams [i].param.pf.sensf_res[ii]); |
| } |
| ***/ |
| memcpy(result, mTechParams[i].param.pf.sensf_res + 8, 8); // copy PMm |
| if (activationData.params.t3t.num_system_codes > |
| 0) // copy the first System Code |
| { |
| uint16_t systemCode = *(activationData.params.t3t.p_system_codes); |
| result[8] = (uint8_t)(systemCode >> 8); |
| result[9] = (uint8_t)systemCode; |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf( |
| "%s: tech F; sys code=0x%X 0x%X", fn, result[8], result[9]); |
| } |
| pollBytes.reset(e->NewByteArray(len)); |
| e->SetByteArrayRegion(pollBytes.get(), 0, len, (jbyte*)result); |
| } else if (NFC_DISCOVERY_TYPE_POLL_V == mTechParams[i].mode || |
| NFC_DISCOVERY_TYPE_LISTEN_ISO15693 == mTechParams[i].mode) { |
| DLOG_IF(INFO, nfc_debug_enabled) |
| << StringPrintf("%s: tech iso 15693", fn); |
| // iso 15693 response flags: 1 octet |
| // iso 15693 Data Structure Format Identifier (DSF ID): 1 octet |
| // used by public API: NfcV.getDsfId(), NfcV.getResponseFlags(); |
| uint8_t data[2] = {activationData.params.i93.afi, |
| activationData.params.i93.dsfid}; |
| pollBytes.reset(e->NewByteArray(2)); |
| e->SetByteArrayRegion(pollBytes.get(), 0, 2, (jbyte*)data); |
| } else { |
| LOG(ERROR) << StringPrintf("%s: tech unknown ????", fn); |
| pollBytes.reset(e->NewByteArray(0)); |
| } // switch: every type of technology |
| e->SetObjectArrayElement(techPollBytes.get(), i, pollBytes.get()); |
| } // for: every technology in the array |
| #if (NXP_EXTNS == TRUE) |
| if (techPollBytes2 != NULL && mTechListIndex != 0 ) { |
| e->DeleteGlobalRef(techPollBytes2); |
| techPollBytes2= reinterpret_cast<jobjectArray>(e->NewGlobalRef(techPollBytes.get())); |
| } |
| #endif |
| jfieldID f = e->GetFieldID(tag_cls, "mTechPollBytes", "[[B"); |
| e->SetObjectField(tag, f, techPollBytes.get()); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: fillNativeNfcTagMembers4 |
| ** |
| ** Description: Fill NativeNfcTag's members: mTechActBytes. |
| ** The original Google's implementation is in |
| *set_target_activationBytes() |
| ** in com_android_nfc_NativeNfcTag.cpp; |
| ** e: JVM environment. |
| ** tag_cls: Java NativeNfcTag class. |
| ** tag: Java NativeNfcTag object. |
| ** activationData: data from activation. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void NfcTag::fillNativeNfcTagMembers4(JNIEnv* e, jclass tag_cls, jobject tag, |
| tNFA_ACTIVATED& activationData) { |
| static const char fn[] = "NfcTag::fillNativeNfcTagMembers4"; |
| ScopedLocalRef<jbyteArray> actBytes(e, e->NewByteArray(0)); |
| ScopedLocalRef<jclass> byteArrayClass(e, e->GetObjectClass(actBytes.get())); |
| ScopedLocalRef<jobjectArray> techActBytes( |
| e, e->NewObjectArray(mNumTechList, byteArrayClass.get(), 0)); |
| |
| #if (NXP_EXTNS == TRUE) |
| //merging sak for combi tag |
| if(activationData.activate_ntf.protocol & (NFC_PROTOCOL_T1T|NFC_PROTOCOL_T2T|NFC_PROTOCOL_MIFARE|NFC_PROTOCOL_ISO_DEP)) { |
| uint8_t merge_sak = 0; |
| for (int i = 0; i < mNumTechList; i++) { |
| merge_sak = (merge_sak | mTechParams [i].param.pa.sel_rsp); |
| } |
| for (int i = 0; i < mNumTechList; i++) { |
| mTechParams [i].param.pa.sel_rsp = merge_sak; |
| actBytes.reset(e->NewByteArray(1)); |
| e->SetByteArrayRegion(actBytes.get(), 0, 1, (jbyte*) &mTechParams [i].param.pa.sel_rsp); |
| e->SetObjectArrayElement(techActBytes.get(), i, actBytes.get()); |
| } |
| } |
| |
| for (int i = mTechListIndex; i < mNumTechList; i++) { |
| #else |
| for (int i = 0; i < mNumTechList; i++) { |
| #endif |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: index=%d", fn, i); |
| if (NFC_PROTOCOL_T1T == mTechLibNfcTypes[i] || |
| NFC_PROTOCOL_T2T == mTechLibNfcTypes[i]) { |
| if (mTechLibNfcTypes[i] == NFC_PROTOCOL_T1T) |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: T1T; tech A", fn); |
| else if (mTechLibNfcTypes[i] == NFC_PROTOCOL_T2T) |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: T2T; tech A", fn); |
| actBytes.reset(e->NewByteArray(1)); |
| e->SetByteArrayRegion(actBytes.get(), 0, 1, |
| (jbyte*)&mTechParams[i].param.pa.sel_rsp); |
| } else if (NFC_PROTOCOL_T3T == mTechLibNfcTypes[i]) { |
| // felica |
| DLOG_IF(INFO, nfc_debug_enabled) |
| << StringPrintf("%s: T3T; felica; tech F", fn); |
| // really, there is no data |
| actBytes.reset(e->NewByteArray(0)); |
| } else if (NFC_PROTOCOL_MIFARE == mTechLibNfcTypes[i]) { |
| DLOG_IF(INFO, nfc_debug_enabled) |
| << StringPrintf("%s: Mifare Classic; tech A", fn); |
| actBytes.reset(e->NewByteArray(1)); |
| e->SetByteArrayRegion(actBytes.get(), 0, 1, |
| (jbyte*)&mTechParams[i].param.pa.sel_rsp); |
| } |
| #if (NXP_EXTNS == TRUE) |
| else if (NFC_PROTOCOL_T3BT == mTechLibNfcTypes[i]) { |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: tech T3BT; chinaId card", fn); |
| actBytes.reset(e->NewByteArray(0)); |
| } |
| #endif |
| else if (NFC_PROTOCOL_ISO_DEP == mTechLibNfcTypes[i]) { |
| // t4t |
| if (mTechList[i] == |
| TARGET_TYPE_ISO14443_4) // is TagTechnology.ISO_DEP by Java API |
| { |
| if ((mTechParams[i].mode == NFC_DISCOVERY_TYPE_POLL_A) || |
| (mTechParams[i].mode == NFC_DISCOVERY_TYPE_POLL_A_ACTIVE) || |
| (mTechParams[i].mode == NFC_DISCOVERY_TYPE_LISTEN_A) || |
| (mTechParams[i].mode == NFC_DISCOVERY_TYPE_LISTEN_A_ACTIVE)) { |
| // see NFC Forum Digital Protocol specification, section 11.6.2, "RATS |
| // Response"; search for "historical bytes"; copy historical bytes |
| // into Java object; the public API, IsoDep.getHistoricalBytes(), |
| // returns this data; |
| if (activationData.activate_ntf.intf_param.type == |
| NFC_INTERFACE_ISO_DEP) { |
| tNFC_INTF_PA_ISO_DEP& pa_iso = |
| activationData.activate_ntf.intf_param.intf_param.pa_iso; |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf( |
| "%s: T4T; ISO_DEP for tech A; copy historical bytes; len=%u", |
| fn, pa_iso.his_byte_len); |
| actBytes.reset(e->NewByteArray(pa_iso.his_byte_len)); |
| if (pa_iso.his_byte_len > 0) |
| e->SetByteArrayRegion(actBytes.get(), 0, pa_iso.his_byte_len, |
| (jbyte*)(pa_iso.his_byte)); |
| } else { |
| LOG(ERROR) << StringPrintf( |
| "%s: T4T; ISO_DEP for tech A; wrong interface=%u", fn, |
| activationData.activate_ntf.intf_param.type); |
| actBytes.reset(e->NewByteArray(0)); |
| } |
| } else if ((mTechParams[i].mode == NFC_DISCOVERY_TYPE_POLL_B) || |
| (mTechParams[i].mode == NFC_DISCOVERY_TYPE_POLL_B_PRIME) || |
| (mTechParams[i].mode == NFC_DISCOVERY_TYPE_LISTEN_B) || |
| (mTechParams[i].mode == NFC_DISCOVERY_TYPE_LISTEN_B_PRIME)) { |
| // see NFC Forum Digital Protocol specification, section 12.6.2, |
| // "ATTRIB Response"; copy higher-layer response bytes into Java |
| // object; the public API, IsoDep.getHiLayerResponse(), returns this |
| // data; |
| if (activationData.activate_ntf.intf_param.type == |
| NFC_INTERFACE_ISO_DEP) { |
| tNFC_INTF_PB_ISO_DEP& pb_iso = |
| activationData.activate_ntf.intf_param.intf_param.pb_iso; |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf( |
| "%s: T4T; ISO_DEP for tech B; copy response bytes; len=%u", fn, |
| pb_iso.hi_info_len); |
| actBytes.reset(e->NewByteArray(pb_iso.hi_info_len)); |
| if (pb_iso.hi_info_len > 0) |
| e->SetByteArrayRegion(actBytes.get(), 0, pb_iso.hi_info_len, |
| (jbyte*)(pb_iso.hi_info)); |
| } else { |
| LOG(ERROR) << StringPrintf( |
| "%s: T4T; ISO_DEP for tech B; wrong interface=%u", fn, |
| activationData.activate_ntf.intf_param.type); |
| actBytes.reset(e->NewByteArray(0)); |
| } |
| } |
| } else if (mTechList[i] == |
| TARGET_TYPE_ISO14443_3A) // is TagTechnology.NFC_A by Java API |
| { |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: T4T; tech A", fn); |
| actBytes.reset(e->NewByteArray(1)); |
| e->SetByteArrayRegion(actBytes.get(), 0, 1, |
| (jbyte*)&mTechParams[i].param.pa.sel_rsp); |
| } else { |
| actBytes.reset(e->NewByteArray(0)); |
| } |
| } // case NFC_PROTOCOL_ISO_DEP: //t4t |
| else if (NFC_PROTOCOL_T5T == mTechLibNfcTypes[i]) { |
| DLOG_IF(INFO, nfc_debug_enabled) |
| << StringPrintf("%s: tech iso 15693", fn); |
| // iso 15693 response flags: 1 octet |
| // iso 15693 Data Structure Format Identifier (DSF ID): 1 octet |
| // used by public API: NfcV.getDsfId(), NfcV.getResponseFlags(); |
| uint8_t data[2] = {activationData.params.i93.afi, |
| activationData.params.i93.dsfid}; |
| actBytes.reset(e->NewByteArray(2)); |
| e->SetByteArrayRegion(actBytes.get(), 0, 2, (jbyte*)data); |
| } else { |
| DLOG_IF(INFO, nfc_debug_enabled) |
| << StringPrintf("%s: tech unknown ????", fn); |
| actBytes.reset(e->NewByteArray(0)); |
| } |
| e->SetObjectArrayElement(techActBytes.get(), i, actBytes.get()); |
| } // for: every technology in the array |
| #if (NXP_EXTNS == TRUE) |
| if (techActBytes1 != NULL && mTechListIndex !=0 ) { |
| e->DeleteGlobalRef(techActBytes1); |
| techActBytes1 = reinterpret_cast<jobjectArray>(e->NewGlobalRef(techActBytes.get())); |
| } |
| #endif |
| jfieldID f = e->GetFieldID(tag_cls, "mTechActBytes", "[[B"); |
| e->SetObjectField(tag, f, techActBytes.get()); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: fillNativeNfcTagMembers5 |
| ** |
| ** Description: Fill NativeNfcTag's members: mUid. |
| ** The original Google's implementation is in |
| *nfc_jni_Discovery_notification_callback() |
| ** in com_android_nfc_NativeNfcManager.cpp; |
| ** e: JVM environment. |
| ** tag_cls: Java NativeNfcTag class. |
| ** tag: Java NativeNfcTag object. |
| ** activationData: data from activation. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void NfcTag::fillNativeNfcTagMembers5(JNIEnv* e, jclass tag_cls, jobject tag, |
| tNFA_ACTIVATED& activationData) { |
| static const char fn[] = "NfcTag::fillNativeNfcTagMembers5"; |
| int len = 0; |
| ScopedLocalRef<jbyteArray> uid(e, NULL); |
| |
| if (NFC_DISCOVERY_TYPE_POLL_KOVIO == mTechParams[0].mode) { |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: Kovio", fn); |
| len = mTechParams[0].param.pk.uid_len; |
| uid.reset(e->NewByteArray(len)); |
| e->SetByteArrayRegion(uid.get(), 0, len, |
| (jbyte*)&mTechParams[0].param.pk.uid); |
| } else if (NFC_DISCOVERY_TYPE_POLL_A == mTechParams[0].mode || |
| NFC_DISCOVERY_TYPE_POLL_A_ACTIVE == mTechParams[0].mode || |
| NFC_DISCOVERY_TYPE_LISTEN_A == mTechParams[0].mode || |
| NFC_DISCOVERY_TYPE_LISTEN_A_ACTIVE == mTechParams[0].mode) { |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: tech A", fn); |
| len = mTechParams[0].param.pa.nfcid1_len; |
| uid.reset(e->NewByteArray(len)); |
| e->SetByteArrayRegion(uid.get(), 0, len, |
| (jbyte*)&mTechParams[0].param.pa.nfcid1); |
| // a tag's NFCID1 can change dynamically at each activation; |
| // only the first byte (0x08) is constant; a dynamic NFCID1's length |
| // must be 4 bytes (see NFC Digitial Protocol, |
| // section 4.7.2 SDD_RES Response, Requirements 20). |
| mIsDynamicTagId = (mTechParams[0].param.pa.nfcid1_len == 4) && |
| (mTechParams[0].param.pa.nfcid1[0] == 0x08); |
| } else if (NFC_DISCOVERY_TYPE_POLL_B == mTechParams[0].mode || |
| NFC_DISCOVERY_TYPE_POLL_B_PRIME == mTechParams[0].mode || |
| NFC_DISCOVERY_TYPE_LISTEN_B == mTechParams[0].mode || |
| NFC_DISCOVERY_TYPE_LISTEN_B_PRIME == mTechParams[0].mode) { |
| #if (NXP_EXTNS == TRUE) |
| if(activationData.activate_ntf.protocol != NFA_PROTOCOL_T3BT) { |
| #endif |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: tech B", fn); |
| uid.reset(e->NewByteArray(NFC_NFCID0_MAX_LEN)); |
| e->SetByteArrayRegion(uid.get(), 0, NFC_NFCID0_MAX_LEN, |
| (jbyte*)&mTechParams[0].param.pb.nfcid0); |
| #if (NXP_EXTNS == TRUE) |
| } else { |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: chinaId card", fn); |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: pipi_id[0]=%x", fn, mTechParams [0].param.pb.pupiid[0]); |
| uid.reset(e->NewByteArray(NFC_PUPIID_MAX_LEN)); |
| e->SetByteArrayRegion(uid.get(), 0, NFC_PUPIID_MAX_LEN, |
| (jbyte*) &mTechParams [0].param.pb.pupiid); |
| } |
| #endif |
| } else if (NFC_DISCOVERY_TYPE_POLL_F == mTechParams[0].mode || |
| NFC_DISCOVERY_TYPE_POLL_F_ACTIVE == mTechParams[0].mode || |
| NFC_DISCOVERY_TYPE_LISTEN_F == mTechParams[0].mode || |
| NFC_DISCOVERY_TYPE_LISTEN_F_ACTIVE == mTechParams[0].mode) { |
| uid.reset(e->NewByteArray(NFC_NFCID2_LEN)); |
| e->SetByteArrayRegion(uid.get(), 0, NFC_NFCID2_LEN, |
| (jbyte*)&mTechParams[0].param.pf.nfcid2); |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: tech F", fn); |
| } else if (NFC_DISCOVERY_TYPE_POLL_V == mTechParams[0].mode || |
| NFC_DISCOVERY_TYPE_LISTEN_ISO15693 == mTechParams[0].mode) { |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: tech iso 15693", fn); |
| jbyte data[I93_UID_BYTE_LEN]; // 8 bytes |
| for (int i = 0; i < I93_UID_BYTE_LEN; ++i) // reverse the ID |
| data[i] = activationData.params.i93.uid[I93_UID_BYTE_LEN - i - 1]; |
| uid.reset(e->NewByteArray(I93_UID_BYTE_LEN)); |
| e->SetByteArrayRegion(uid.get(), 0, I93_UID_BYTE_LEN, data); |
| } else { |
| LOG(ERROR) << StringPrintf("%s: tech unknown ????", fn); |
| uid.reset(e->NewByteArray(0)); |
| } |
| jfieldID f = e->GetFieldID(tag_cls, "mUid", "[B"); |
| e->SetObjectField(tag, f, uid.get()); |
| #if (NXP_EXTNS == TRUE) |
| mTechListIndex = mNumTechList; |
| if(!mNumDiscNtf) |
| mTechListIndex = 0; |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s;mTechListIndex=%x",fn,mTechListIndex); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: isP2pDiscovered |
| ** |
| ** Description: Does the peer support P2P? |
| ** |
| ** Returns: True if the peer supports P2P. |
| ** |
| *******************************************************************************/ |
| bool NfcTag::isP2pDiscovered() { |
| static const char fn[] = "NfcTag::isP2pDiscovered"; |
| bool retval = false; |
| |
| for (int i = 0; i < mNumTechList; i++) { |
| if (mTechLibNfcTypes[i] == NFA_PROTOCOL_NFC_DEP) { |
| // if remote device supports P2P |
| DLOG_IF(INFO, nfc_debug_enabled) |
| << StringPrintf("%s: discovered P2P", fn); |
| retval = true; |
| break; |
| } |
| } |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: return=%u", fn, retval); |
| return retval; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: selectP2p |
| ** |
| ** Description: Select the preferred P2P technology if there is a choice. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void NfcTag::selectP2p() { |
| static const char fn[] = "NfcTag::selectP2p"; |
| uint8_t rfDiscoveryId = 0; |
| |
| for (int i = 0; i < mNumTechList; i++) { |
| // if remote device does not support P2P, just skip it |
| if (mTechLibNfcTypes[i] != NFA_PROTOCOL_NFC_DEP) continue; |
| |
| // if remote device supports tech F; |
| // tech F is preferred because it is faster than tech A |
| if ((mTechParams[i].mode == NFC_DISCOVERY_TYPE_POLL_F) || |
| (mTechParams[i].mode == NFC_DISCOVERY_TYPE_POLL_F_ACTIVE)) { |
| rfDiscoveryId = mTechHandles[i]; |
| break; // no need to search further |
| } else if ((mTechParams[i].mode == NFC_DISCOVERY_TYPE_POLL_A) || |
| (mTechParams[i].mode == NFC_DISCOVERY_TYPE_POLL_A_ACTIVE)) { |
| // only choose tech A if tech F is unavailable |
| if (rfDiscoveryId == 0) rfDiscoveryId = mTechHandles[i]; |
| } |
| } |
| |
| if (rfDiscoveryId > 0) { |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf( |
| "%s: select P2P; target rf discov id=0x%X", fn, rfDiscoveryId); |
| tNFA_STATUS stat = |
| NFA_Select(rfDiscoveryId, NFA_PROTOCOL_NFC_DEP, NFA_INTERFACE_NFC_DEP); |
| if (stat != NFA_STATUS_OK) |
| LOG(ERROR) << StringPrintf("%s: fail select P2P; error=0x%X", fn, stat); |
| } else |
| LOG(ERROR) << StringPrintf("%s: cannot find P2P", fn); |
| resetTechnologies(); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: resetTechnologies |
| ** |
| ** Description: Clear all data related to the technology, protocol of the |
| ** tag. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void NfcTag::resetTechnologies() { |
| static const char fn[] = "NfcTag::resetTechnologies"; |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s", fn); |
| mNumTechList = 0; |
| #if (NXP_EXTNS == TRUE) |
| mTechListIndex = 0; |
| #endif |
| memset(mTechList, 0, sizeof(mTechList)); |
| memset(mTechHandles, 0, sizeof(mTechHandles)); |
| memset(mTechLibNfcTypes, 0, sizeof(mTechLibNfcTypes)); |
| memset(mTechParams, 0, sizeof(mTechParams)); |
| mIsDynamicTagId = false; |
| mIsFelicaLite = false; |
| resetAllTransceiveTimeouts(); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: selectFirstTag |
| ** |
| ** Description: When multiple tags are discovered, just select the first one |
| *to activate. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void NfcTag::selectFirstTag() { |
| static const char fn[] = "NfcTag::selectFirstTag"; |
| int foundIdx = -1; |
| tNFA_INTF_TYPE rf_intf = NFA_INTERFACE_FRAME; |
| |
| for (int i = 0; i < mNumTechList; i++) { |
| DLOG_IF(INFO, nfc_debug_enabled) |
| << StringPrintf("%s: nfa target idx=%d h=0x%X; protocol=0x%X", fn, i, |
| mTechHandles[i], mTechLibNfcTypes[i]); |
| if (mTechLibNfcTypes[i] != NFA_PROTOCOL_NFC_DEP) { |
| #if (NXP_EXTNS == TRUE) |
| selectedId = i; |
| #endif |
| foundIdx = i; |
| break; |
| } |
| } |
| |
| if (foundIdx != -1) { |
| if (mTechLibNfcTypes[foundIdx] == NFA_PROTOCOL_ISO_DEP) { |
| rf_intf = NFA_INTERFACE_ISO_DEP; |
| } else if (mTechLibNfcTypes[foundIdx] == NFC_PROTOCOL_MIFARE) { |
| rf_intf = NFA_INTERFACE_MIFARE; |
| } else |
| rf_intf = NFA_INTERFACE_FRAME; |
| |
| tNFA_STATUS stat = |
| NFA_Select(mTechHandles[foundIdx], mTechLibNfcTypes[foundIdx], rf_intf); |
| if (stat != NFA_STATUS_OK) |
| LOG(ERROR) << StringPrintf("%s: fail select; error=0x%X", fn, stat); |
| } else |
| LOG(ERROR) << StringPrintf("%s: only found NFC-DEP technology.", fn); |
| } |
| |
| #if (NXP_EXTNS == TRUE) |
| /******************************************************************************* |
| ** |
| ** Function: checkNextValidProtocol |
| ** |
| ** Description: When multiple tags are discovered, check next valid protocol |
| ** |
| ** Returns: id |
| ** |
| *******************************************************************************/ |
| int NfcTag::checkNextValidProtocol(void) { |
| static const char fn [] = "NfcTag::checkNextValidProtocol"; |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: enter, mNumDiscTechList=%x", |
| fn, mNumDiscTechList); |
| int foundIdx = -1; |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: enter,selectedId=%x", |
| fn, selectedId); |
| for (int i = 0; i < mNumDiscTechList; i++) { |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf( |
| "%s: nfa target idx=%d h=0x%X; protocol=0x%X", fn, i, mTechHandles [i], |
| mTechLibNfcTypes [i]); |
| if ((mTechHandles[selectedId] != mTechHandles [i]) && |
| (mTechLibNfcTypes[i] != NFA_PROTOCOL_NFC_DEP)) { |
| foundIdx = i; |
| break; |
| } |
| } |
| return foundIdx; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: selectNextTag |
| ** |
| ** Description: When multiple tags are discovered, selects the next tag to |
| ** activate. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void NfcTag::selectNextTag () { |
| static const char fn [] = "NfcTag::selectNextTag"; |
| int foundIdx = -1; |
| tNFA_INTF_TYPE rf_intf = NFA_INTERFACE_FRAME; |
| tNFA_STATUS stat = NFA_STATUS_FAILED; |
| |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: enter, mNumDiscTechList=%x", |
| fn, mNumDiscTechList); |
| for (int i = 0; i < mNumDiscTechList; i++) { |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: nfa target idx=%dh=0x%X; protocol=0x%X", |
| fn, i, mTechHandles [i], mTechLibNfcTypes [i]); |
| if ((mTechHandles[selectedId] != mTechHandles [i]) && |
| (mTechLibNfcTypes[i] != NFA_PROTOCOL_NFC_DEP)) { |
| selectedId = i; |
| foundIdx = i; |
| break; |
| } |
| } |
| |
| if (foundIdx != -1) { |
| if (mTechLibNfcTypes [foundIdx] == NFA_PROTOCOL_ISO_DEP) { |
| rf_intf = NFA_INTERFACE_ISO_DEP; |
| } else if(mTechLibNfcTypes [foundIdx] == NFC_PROTOCOL_MIFARE) { |
| rf_intf = NFA_INTERFACE_MIFARE; |
| } else { |
| rf_intf = NFA_INTERFACE_FRAME; |
| } |
| |
| stat = NFA_Select (mTechHandles [foundIdx], mTechLibNfcTypes [foundIdx], rf_intf); |
| if (stat == NFA_STATUS_OK) { |
| DLOG_IF(ERROR, nfc_debug_enabled) << StringPrintf("%s: stat=%x; wait for activated ntf", fn, stat); |
| } else { |
| DLOG_IF(ERROR, nfc_debug_enabled) << StringPrintf("%s: fail select; error=0x%X", fn, stat); |
| } |
| } else { |
| DLOG_IF(ERROR, nfc_debug_enabled) << StringPrintf("%s: only found NFC-DEP technology.", fn); |
| } |
| } |
| #endif |
| |
| /******************************************************************************* |
| ** |
| ** Function: getT1tMaxMessageSize |
| ** |
| ** Description: Get the maximum size (octet) that a T1T can store. |
| ** |
| ** Returns: Maximum size in octets. |
| ** |
| *******************************************************************************/ |
| int NfcTag::getT1tMaxMessageSize() { |
| static const char fn[] = "NfcTag::getT1tMaxMessageSize"; |
| |
| if (mProtocol != NFC_PROTOCOL_T1T) { |
| LOG(ERROR) << StringPrintf("%s: wrong protocol %u", fn, mProtocol); |
| return 0; |
| } |
| return mtT1tMaxMessageSize; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: calculateT1tMaxMessageSize |
| ** |
| ** Description: Calculate type-1 tag's max message size based on header ROM |
| *bytes. |
| ** activate: reference to activation data. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void NfcTag::calculateT1tMaxMessageSize(tNFA_ACTIVATED& activate) { |
| static const char fn[] = "NfcTag::calculateT1tMaxMessageSize"; |
| |
| // make sure the tag is type-1 |
| if (activate.activate_ntf.protocol != NFC_PROTOCOL_T1T) { |
| mtT1tMaxMessageSize = 0; |
| return; |
| } |
| |
| // examine the first byte of header ROM bytes |
| switch (activate.params.t1t.hr[0]) { |
| case RW_T1T_IS_TOPAZ96: |
| mtT1tMaxMessageSize = 90; |
| break; |
| case RW_T1T_IS_TOPAZ512: |
| mtT1tMaxMessageSize = 462; |
| break; |
| default: |
| LOG(ERROR) << StringPrintf("%s: unknown T1T HR0=%u", fn, |
| activate.params.t1t.hr[0]); |
| mtT1tMaxMessageSize = 0; |
| break; |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: isMifareUltralight |
| ** |
| ** Description: Whether the currently activated tag is Mifare Ultralight. |
| ** |
| ** Returns: True if tag is Mifare Ultralight. |
| ** |
| *******************************************************************************/ |
| bool NfcTag::isMifareUltralight() { |
| static const char fn[] = "NfcTag::isMifareUltralight"; |
| bool retval = false; |
| |
| for (int i = 0; i < mNumTechList; i++) { |
| if (mTechParams[i].mode == NFC_DISCOVERY_TYPE_POLL_A) { |
| // see NFC Digital Protocol, section 4.6.3 (SENS_RES); section 4.8.2 |
| // (SEL_RES). see "MF0ICU1 Functional specification MIFARE Ultralight", |
| // Rev. 3.4 - 4 February 2008, section 6.7. |
| if ((mTechParams[i].param.pa.sens_res[0] == 0x44) && |
| (mTechParams[i].param.pa.sens_res[1] == 0) && |
| ((mTechParams[i].param.pa.sel_rsp == 0) || |
| (mTechParams[i].param.pa.sel_rsp == 0x04)) && |
| (mTechParams[i].param.pa.nfcid1[0] == 0x04)) { |
| retval = true; |
| } |
| break; |
| } |
| } |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: return=%u", fn, retval); |
| return retval; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: isMifareDESFire |
| ** |
| ** Description: Whether the currently activated tag is Mifare DESFire. |
| ** |
| ** Returns: True if tag is Mifare DESFire. |
| ** |
| *******************************************************************************/ |
| bool NfcTag::isMifareDESFire() { |
| static const char fn[] = "NfcTag::isMifareDESFire"; |
| bool retval = false; |
| |
| for (int i = 0; i < mNumTechList; i++) { |
| if ((mTechParams[i].mode == NFC_DISCOVERY_TYPE_POLL_A) || |
| (mTechParams[i].mode == NFC_DISCOVERY_TYPE_LISTEN_A) || |
| (mTechParams[i].mode == NFC_DISCOVERY_TYPE_LISTEN_A_ACTIVE)) { |
| /* DESfire has one sak byte and 2 ATQA bytes */ |
| if ((mTechParams[i].param.pa.sens_res[0] == 0x44) && |
| (mTechParams[i].param.pa.sens_res[1] == 0x03) && |
| (mTechParams[i].param.pa.sel_rsp == 0x20)) { |
| retval = true; |
| } |
| break; |
| } |
| } |
| |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: return=%u", fn, retval); |
| return retval; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: isFelicaLite |
| ** |
| ** Description: Whether the currently activated tag is Felica Lite. |
| ** |
| ** Returns: True if tag is Felica Lite. |
| ** |
| *******************************************************************************/ |
| |
| bool NfcTag::isFelicaLite() { return mIsFelicaLite; } |
| |
| /******************************************************************************* |
| ** |
| ** Function: isT2tNackResponse |
| ** |
| ** Description: Whether the response is a T2T NACK response. |
| ** See NFC Digital Protocol Technical Specification |
| *(2010-11-17). |
| ** Chapter 9 (Type 2 Tag Platform), section 9.6 (READ). |
| ** response: buffer contains T2T response. |
| ** responseLen: length of the response. |
| ** |
| ** Returns: True if the response is NACK |
| ** |
| *******************************************************************************/ |
| bool NfcTag::isT2tNackResponse(const uint8_t* response, uint32_t responseLen) { |
| static const char fn[] = "NfcTag::isT2tNackResponse"; |
| bool isNack = false; |
| |
| if (responseLen == 1) { |
| if (response[0] == 0xA) |
| isNack = false; // an ACK response, so definitely not a NACK |
| else |
| isNack = true; // assume every value is a NACK |
| } |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: return %u", fn, isNack); |
| return isNack; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: isNdefDetectionTimedOut |
| ** |
| ** Description: Whether NDEF-detection algorithm timed out. |
| ** |
| ** Returns: True if NDEF-detection algorithm timed out. |
| ** |
| *******************************************************************************/ |
| bool NfcTag::isNdefDetectionTimedOut() { return mNdefDetectionTimedOut; } |
| |
| /******************************************************************************* |
| ** |
| ** Function: connectionEventHandler |
| ** |
| ** Description: Handle connection-related events. |
| ** event: event code. |
| ** data: pointer to event data. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void NfcTag::connectionEventHandler(uint8_t event, tNFA_CONN_EVT_DATA* data) { |
| static const char fn[] = "NfcTag::connectionEventHandler"; |
| |
| switch (event) { |
| case NFA_DISC_RESULT_EVT: { |
| tNFA_DISC_RESULT& disc_result = data->disc_result; |
| if (disc_result.status == NFA_STATUS_OK) { |
| discoverTechnologies(disc_result); |
| } |
| } break; |
| |
| case NFA_ACTIVATED_EVT: |
| // Only do tag detection if we are polling and it is not 'EE Direct RF' |
| // activation (which may happen when we are activated as a tag). |
| if (data->activated.activate_ntf.rf_tech_param.mode < |
| NCI_DISCOVERY_TYPE_LISTEN_A && |
| data->activated.activate_ntf.intf_param.type != |
| NFC_INTERFACE_EE_DIRECT_RF) { |
| tNFA_ACTIVATED& activated = data->activated; |
| if (IsSameKovio(activated)) break; |
| mIsActivated = true; |
| mProtocol = activated.activate_ntf.protocol; |
| calculateT1tMaxMessageSize(activated); |
| discoverTechnologies(activated); |
| createNativeNfcTag(activated); |
| } |
| break; |
| |
| case NFA_DEACTIVATED_EVT: |
| mIsActivated = false; |
| mProtocol = NFC_PROTOCOL_UNKNOWN; |
| resetTechnologies(); |
| break; |
| |
| case NFA_READ_CPLT_EVT: { |
| SyncEventGuard g(mReadCompleteEvent); |
| mReadCompletedStatus = data->status; |
| mNdefDetectionTimedOut = data->status != NFA_STATUS_OK; |
| if (mNdefDetectionTimedOut) |
| LOG(ERROR) << StringPrintf("%s: NDEF detection timed out", fn); |
| mReadCompleteEvent.notifyOne(); |
| } break; |
| |
| case NFA_NDEF_DETECT_EVT: { |
| tNFA_NDEF_DETECT& ndef_detect = data->ndef_detect; |
| mNdefDetectionTimedOut = ndef_detect.status == NFA_STATUS_TIMEOUT; |
| if (mNdefDetectionTimedOut) |
| LOG(ERROR) << StringPrintf("%s: NDEF detection timed out", fn); |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function setActive |
| ** |
| ** Description Sets the active state for the object |
| ** |
| ** Returns None. |
| ** |
| *******************************************************************************/ |
| void NfcTag::setActive(bool active) { mIsActivated = active; } |
| |
| /******************************************************************************* |
| ** |
| ** Function: isDynamicTagId |
| ** |
| ** Description: Whether a tag has a dynamic tag ID. |
| ** |
| ** Returns: True if ID is dynamic. |
| ** |
| *******************************************************************************/ |
| bool NfcTag::isDynamicTagId() { |
| return mIsDynamicTagId && |
| (mTechList[0] == TARGET_TYPE_ISO14443_4) && // type-4 tag |
| (mTechList[1] == TARGET_TYPE_ISO14443_3A); // tech A |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: resetAllTransceiveTimeouts |
| ** |
| ** Description: Reset all timeouts for all technologies to default values. |
| ** |
| ** Returns: none |
| ** |
| *******************************************************************************/ |
| void NfcTag::resetAllTransceiveTimeouts() { |
| mTechnologyTimeoutsTable[TARGET_TYPE_ISO14443_3A] = 618; // NfcA |
| mTechnologyTimeoutsTable[TARGET_TYPE_ISO14443_3B] = 1000; // NfcB |
| mTechnologyTimeoutsTable[TARGET_TYPE_ISO14443_4] = 618; // ISO-DEP |
| mTechnologyTimeoutsTable[TARGET_TYPE_FELICA] = 255; // Felica |
| mTechnologyTimeoutsTable[TARGET_TYPE_V] = 1000; // NfcV |
| mTechnologyTimeoutsTable[TARGET_TYPE_NDEF] = 1000; |
| mTechnologyTimeoutsTable[TARGET_TYPE_NDEF_FORMATABLE] = 1000; |
| mTechnologyTimeoutsTable[TARGET_TYPE_MIFARE_CLASSIC] = 618; // MifareClassic |
| mTechnologyTimeoutsTable[TARGET_TYPE_MIFARE_UL] = 618; // MifareUltralight |
| mTechnologyTimeoutsTable[TARGET_TYPE_KOVIO_BARCODE] = 1000; // NfcBarcode |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: getTransceiveTimeout |
| ** |
| ** Description: Get the timeout value for one technology. |
| ** techId: one of the values in TARGET_TYPE_* defined in |
| *NfcJniUtil.h |
| ** |
| ** Returns: Timeout value in millisecond. |
| ** |
| *******************************************************************************/ |
| int NfcTag::getTransceiveTimeout(int techId) { |
| static const char fn[] = "NfcTag::getTransceiveTimeout"; |
| int retval = 1000; |
| if ((techId > 0) && (techId < (int)mTechnologyTimeoutsTable.size())) |
| retval = mTechnologyTimeoutsTable[techId]; |
| else |
| LOG(ERROR) << StringPrintf("%s: invalid tech=%d", fn, techId); |
| return retval; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: setTransceiveTimeout |
| ** |
| ** Description: Set the timeout value for one technology. |
| ** techId: one of the values in TARGET_TYPE_* defined in |
| *NfcJniUtil.h |
| ** timeout: timeout value in millisecond. |
| ** |
| ** Returns: Timeout value. |
| ** |
| *******************************************************************************/ |
| void NfcTag::setTransceiveTimeout(int techId, int timeout) { |
| static const char fn[] = "NfcTag::setTransceiveTimeout"; |
| if ((techId >= 0) && (techId < (int)mTechnologyTimeoutsTable.size())) |
| mTechnologyTimeoutsTable[techId] = timeout; |
| else |
| LOG(ERROR) << StringPrintf("%s: invalid tech=%d", fn, techId); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: getPresenceCheckAlgorithm |
| ** |
| ** Description: Get presence-check algorithm from .conf file. |
| ** |
| ** Returns: Presence-check algorithm. |
| ** |
| *******************************************************************************/ |
| tNFA_RW_PRES_CHK_OPTION NfcTag::getPresenceCheckAlgorithm() { |
| return mPresenceCheckAlgorithm; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: isInfineonMyDMove |
| ** |
| ** Description: Whether the currently activated tag is Infineon My-D Move. |
| ** |
| ** Returns: True if tag is Infineon My-D Move. |
| ** |
| *******************************************************************************/ |
| bool NfcTag::isInfineonMyDMove() { |
| static const char fn[] = "NfcTag::isInfineonMyDMove"; |
| bool retval = false; |
| |
| for (int i = 0; i < mNumTechList; i++) { |
| if (mTechParams[i].mode == NFC_DISCOVERY_TYPE_POLL_A) { |
| // see Infineon my-d move, my-d move NFC, SLE 66R01P, SLE 66R01PN, |
| // Short Product Information, 2011-11-24, section 3.5 |
| if (mTechParams[i].param.pa.nfcid1[0] == 0x05) { |
| uint8_t highNibble = mTechParams[i].param.pa.nfcid1[1] & 0xF0; |
| if (highNibble == 0x30) retval = true; |
| } |
| break; |
| } |
| } |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: return=%u", fn, retval); |
| return retval; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: isKovioType2Tag |
| ** |
| ** Description: Whether the currently activated tag is Kovio Type-2 tag. |
| ** |
| ** Returns: True if tag is Kovio Type-2 tag. |
| ** |
| *******************************************************************************/ |
| bool NfcTag::isKovioType2Tag() { |
| static const char fn[] = "NfcTag::isKovioType2Tag"; |
| bool retval = false; |
| |
| for (int i = 0; i < mNumTechList; i++) { |
| if (mTechParams[i].mode == NFC_DISCOVERY_TYPE_POLL_A) { |
| // Kovio 2Kb RFID Tag, Functional Specification, |
| // March 2, 2012, v2.0, section 8.3. |
| if (mTechParams[i].param.pa.nfcid1[0] == 0x37) retval = true; |
| break; |
| } |
| } |
| DLOG_IF(INFO, nfc_debug_enabled) << StringPrintf("%s: return=%u", fn, retval); |
| return retval; |
| } |