| # We can build either as part of a standalone Kernel build or as |
| # an external module. Determine which mechanism is being used |
| ifeq ($(MODNAME),) |
| KERNEL_BUILD := 1 |
| else |
| KERNEL_BUILD := 0 |
| endif |
| |
| ifeq ($(KERNEL_BUILD), 1) |
| # These are configurable via Kconfig for kernel-based builds |
| # Need to explicitly configure for Android-based builds |
| AUDIO_BLD_DIR := $(shell pwd)/kernel/msm-4.19 |
| AUDIO_ROOT := $(AUDIO_BLD_DIR)/techpack/audio |
| endif |
| |
| ifeq ($(KERNEL_BUILD), 0) |
| ifeq ($(CONFIG_ARCH_SM8150), y) |
| ifdef CONFIG_SND_SOC_SA8155 |
| include $(AUDIO_ROOT)/config/sa8155auto.conf |
| INCS += -include $(AUDIO_ROOT)/config/sa8155autoconf.h |
| else |
| include $(AUDIO_ROOT)/config/sm8150auto.conf |
| INCS += -include $(AUDIO_ROOT)/config/sm8150autoconf.h |
| endif |
| endif |
| ifeq ($(CONFIG_ARCH_SM6150), y) |
| ifdef CONFIG_SND_SOC_SA6155 |
| include $(AUDIO_ROOT)/config/sa6155auto.conf |
| INCS += -include $(AUDIO_ROOT)/config/sa6155autoconf.h |
| else |
| include $(AUDIO_ROOT)/config/sm6150auto.conf |
| INCS += -include $(AUDIO_ROOT)/config/sm6150autoconf.h |
| endif |
| endif |
| ifeq ($(CONFIG_ARCH_TRINKET), y) |
| include $(AUDIO_ROOT)/config/sm6150auto.conf |
| INCS += -include $(AUDIO_ROOT)/config/sm6150autoconf.h |
| endif |
| ifeq ($(CONFIG_ARCH_KONA), y) |
| include $(AUDIO_ROOT)/config/konaauto.conf |
| INCS += -include $(AUDIO_ROOT)/config/konaautoconf.h |
| endif |
| ifeq ($(CONFIG_ARCH_LITO), y) |
| include $(AUDIO_ROOT)/config/litoauto.conf |
| INCS += -include $(AUDIO_ROOT)/config/litoautoconf.h |
| endif |
| ifeq ($(CONFIG_ARCH_BENGAL), y) |
| include $(AUDIO_ROOT)/config/bengalauto.conf |
| INCS += -include $(AUDIO_ROOT)/config/bengalautoconf.h |
| endif |
| ifeq ($(CONFIG_ARCH_SDMSHRIKE), y) |
| ifdef CONFIG_SND_SOC_SA8155 |
| include $(AUDIO_ROOT)/config/sa8155auto.conf |
| INCS += -include $(AUDIO_ROOT)/config/sa8155autoconf.h |
| else |
| include $(AUDIO_ROOT)/config/sm8150auto.conf |
| INCS += -include $(AUDIO_ROOT)/config/sm8150autoconf.h |
| endif |
| endif |
| ifeq ($(CONFIG_ARCH_QCS405), y) |
| include $(AUDIO_ROOT)/config/qcs405auto.conf |
| INCS += -include $(AUDIO_ROOT)/config/qcs405autoconf.h |
| endif |
| ifeq ($(CONFIG_QTI_GVM), y) |
| include $(AUDIO_ROOT)/config/gvmauto.conf |
| INCS += -include $(AUDIO_ROOT)/config/gvmautoconf.h |
| endif |
| ifeq ($(CONFIG_ARCH_SDM660), y) |
| include $(AUDIO_ROOT)/config/sdm660auto.conf |
| INCS += -include $(AUDIO_ROOT)/config/sdm660autoconf.h |
| endif |
| endif |
| |
| # As per target team, build is done as follows: |
| # Defconfig : build with default flags |
| # Slub : defconfig + CONFIG_SLUB_DEBUG := y + |
| # CONFIG_SLUB_DEBUG_ON := y + CONFIG_PAGE_POISONING := y |
| # Perf : Using appropriate msmXXXX-perf_defconfig |
| # |
| # Shipment builds (user variants) should not have any debug feature |
| # enabled. This is identified using 'TARGET_BUILD_VARIANT'. Slub builds |
| # are identified using the CONFIG_SLUB_DEBUG_ON configuration. Since |
| # there is no other way to identify defconfig builds, QTI internal |
| # representation of perf builds (identified using the string 'perf'), |
| # is used to identify if the build is a slub or defconfig one. This |
| # way no critical debug feature will be enabled for perf and shipment |
| # builds. Other OEMs are also protected using the TARGET_BUILD_VARIANT |
| # config. |
| |
| ############ UAPI ############ |
| UAPI_DIR := uapi |
| UAPI_INC := -I$(AUDIO_ROOT)/include/$(UAPI_DIR) |
| |
| ############ COMMON ############ |
| COMMON_DIR := include |
| COMMON_INC := -I$(AUDIO_ROOT)/$(COMMON_DIR) |
| |
| ############ ASoC Drivers ############ |
| |
| # for SM8150 sound card driver |
| ifdef CONFIG_SND_SOC_SM8150 |
| MACHINE_OBJS += sm8150.o |
| MACHINE_OBJS += machine_815x_init.o |
| endif |
| |
| # for SM6150 sound card driver |
| ifdef CONFIG_SND_SOC_SM6150 |
| MACHINE_OBJS += sm6150.o |
| MACHINE_OBJS += machine_615x_init.o |
| endif |
| |
| # For sa6155 sound card driver |
| ifdef CONFIG_SND_SOC_SA6155 |
| MACHINE_OBJS += sa6155.o |
| endif |
| |
| # for qcs405 sound card driver |
| ifdef CONFIG_SND_SOC_QCS405 |
| MACHINE_OBJS += qcs405.o |
| endif |
| |
| # for KONA sound card driver |
| ifdef CONFIG_SND_SOC_KONA |
| MACHINE_OBJS += kona.o |
| endif |
| |
| ifdef CONFIG_SND_SOC_LITO |
| MACHINE_OBJS += kona.o |
| endif |
| |
| # for BENGAL sound card driver |
| ifdef CONFIG_SND_SOC_BENGAL |
| MACHINE_OBJS += bengal.o |
| endif |
| |
| # for sa8155 sound card driver |
| ifdef CONFIG_SND_SOC_SA8155 |
| MACHINE_OBJS += sa8155.o |
| endif |
| |
| # for SDM6xx sound card driver |
| ifdef CONFIG_SND_SOC_SDM660 |
| MACHINE_OBJS += sdm660-common.o |
| endif |
| |
| # for SDM6xx sound card driver |
| ifdef CONFIG_SND_SOC_INT_CODEC |
| MACHINE_OBJS += sdm660-internal.o |
| endif |
| |
| # for SDM6xx sound card driver |
| ifdef CONFIG_SND_SOC_EXT_CODEC |
| MACHINE_OBJS += sdm660-external.o |
| MACHINE_OBJS += sdm660-ext-dai-links.o |
| endif |
| |
| ifdef CONFIG_SND_SOC_CPE |
| CPE_LSM_OBJS += msm-cpe-lsm.o |
| endif |
| |
| ifdef CONFIG_SND_SOC_QDSP6V2 |
| PLATFORM_OBJS += msm-audio-effects-q6-v2.o |
| PLATFORM_OBJS += msm-compress-q6-v2.o |
| PLATFORM_OBJS += msm-dai-fe.o |
| PLATFORM_OBJS += msm-dai-q6-hdmi-v2.o |
| PLATFORM_OBJS += msm-dai-q6-v2.o |
| PLATFORM_OBJS += msm-dai-stub-v2.o |
| PLATFORM_OBJS += msm-lsm-client.o |
| PLATFORM_OBJS += msm-pcm-afe-v2.o |
| PLATFORM_OBJS += msm-pcm-dtmf-v2.o |
| PLATFORM_OBJS += msm-pcm-hostless.o |
| PLATFORM_OBJS += msm-pcm-host-voice-v2.o |
| PLATFORM_OBJS += msm-pcm-loopback-v2.o |
| PLATFORM_OBJS += msm-pcm-q6-noirq.o |
| PLATFORM_OBJS += msm-pcm-q6-v2.o |
| PLATFORM_OBJS += msm-pcm-routing-v2.o |
| PLATFORM_OBJS += msm-pcm-voice-v2.o |
| PLATFORM_OBJS += msm-pcm-voip-v2.o |
| PLATFORM_OBJS += msm-transcode-loopback-q6-v2.o |
| PLATFORM_OBJS += platform_init.o |
| endif |
| ifdef CONFIG_WCD9XXX_CODEC_CORE |
| PLATFORM_OBJS += msm-dai-slim.o |
| endif |
| ifdef CONFIG_DOLBY_DS2 |
| PLATFORM_OBJS += msm-ds2-dap-config.o |
| endif |
| ifdef CONFIG_DOLBY_LICENSE |
| PLATFORM_OBJS += msm-ds2-dap-config.o |
| endif |
| ifdef CONFIG_SND_HWDEP_ROUTING |
| PLATFORM_OBJS += msm-pcm-routing-devdep.o |
| endif |
| ifdef CONFIG_QTI_PP |
| PLATFORM_OBJS += msm-qti-pp-config.o |
| endif |
| |
| LINUX_INC += -Iinclude/linux |
| |
| INCS += $(COMMON_INC) \ |
| $(UAPI_INC) |
| |
| EXTRA_CFLAGS += $(INCS) |
| |
| CDEFINES += -DANI_LITTLE_BYTE_ENDIAN \ |
| -DANI_LITTLE_BIT_ENDIAN \ |
| -DDOT11F_LITTLE_ENDIAN_HOST \ |
| -DANI_COMPILER_TYPE_GCC \ |
| -DANI_OS_TYPE_ANDROID=6 \ |
| -DPTT_SOCK_SVC_ENABLE \ |
| -Wall\ |
| -D__linux__ |
| |
| KBUILD_CPPFLAGS += $(CDEFINES) |
| |
| # Currently, for versions of gcc which support it, the kernel Makefile |
| # is disabling the maybe-uninitialized warning. Re-enable it for the |
| # AUDIO driver. Note that we must use EXTRA_CFLAGS here so that it |
| # will override the kernel settings. |
| ifeq ($(call cc-option-yn, -Wmaybe-uninitialized),y) |
| EXTRA_CFLAGS += -Wmaybe-uninitialized |
| endif |
| #EXTRA_CFLAGS += -Wmissing-prototypes |
| |
| ifeq ($(call cc-option-yn, -Wheader-guard),y) |
| EXTRA_CFLAGS += -Wheader-guard |
| endif |
| |
| ifeq ($(KERNEL_BUILD), 0) |
| KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/dsp/Module.symvers |
| KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/asoc/codecs/Module.symvers |
| KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/asoc/codecs/wcd934x/Module.symvers |
| KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/asoc/codecs/wcd937x/Module.symvers |
| KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/asoc/codecs/sdm660_cdc/Module.symvers |
| KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/asoc/codecs/msm_sdw/Module.symvers |
| endif |
| ifeq ($(KERNEL_BUILD), 1) |
| obj-y += codecs/ |
| endif |
| # Module information used by KBuild framework |
| obj-$(CONFIG_SND_SOC_QDSP6V2) += platform_dlkm.o |
| platform_dlkm-y := $(PLATFORM_OBJS) |
| |
| obj-$(CONFIG_SND_SOC_SM8150) += machine_dlkm.o |
| machine_dlkm-y := $(MACHINE_OBJS) |
| |
| obj-$(CONFIG_SND_SOC_SM6150) += machine_dlkm.o |
| machine_dlkm-y := $(MACHINE_OBJS) |
| |
| obj-$(CONFIG_SND_SOC_SA6155) += machine_dlkm.o |
| machine_dlkm-y := $(MACHINE_OBJS) |
| |
| obj-$(CONFIG_SND_SOC_QCS405) += machine_dlkm.o |
| machine_dlkm-y := $(MACHINE_OBJS) |
| |
| obj-$(CONFIG_SND_SOC_KONA) += machine_dlkm.o |
| machine_dlkm-y := $(MACHINE_OBJS) |
| |
| obj-$(CONFIG_SND_SOC_LITO) += machine_dlkm.o |
| machine_dlkm-y := $(MACHINE_OBJS) |
| |
| obj-$(CONFIG_SND_SOC_BENGAL) += machine_dlkm.o |
| machine_dlkm-y := $(MACHINE_OBJS) |
| |
| obj-$(CONFIG_SND_SOC_SA8155) += machine_dlkm.o |
| machine_dlkm-y := $(MACHINE_OBJS) |
| |
| obj-$(CONFIG_SND_SOC_EXT_CODEC) += machine_dlkm.o |
| machine_dlkm-y := $(MACHINE_OBJS) |
| |
| obj-$(CONFIG_SND_SOC_INT_CODEC) += machine_dlkm.o |
| machine_dlkm-y := $(MACHINE_OBJS) |
| |
| obj-$(CONFIG_SND_SOC_CPE) += cpe_lsm_dlkm.o |
| cpe_lsm_dlkm-y := $(CPE_LSM_OBJS) |