| # We can build either as part of a standalone Kernel build or as |
| # an external module. Determine which mechanism is being used |
| ifeq ($(MODNAME), ) |
| KERNEL_BUILD := 1 |
| else |
| KERNEL_BUILD := 0 |
| endif |
| |
| ifeq ($(KERNEL_BUILD), 1) |
| # These are configurable via Kconfig for kernel-based builds |
| # Need to explicitly configure for Android-based builds |
| AUDIO_BLD_DIR := $(shell pwd)/kernel/msm-4.19 |
| AUDIO_ROOT := $(AUDIO_BLD_DIR)/techpack/audio |
| endif |
| |
| ifeq ($(KERNEL_BUILD), 0) |
| ifeq ($(CONFIG_ARCH_SM6150), y) |
| ifdef CONFIG_SND_SOC_SA6155 |
| include $(AUDIO_ROOT)/config/sa6155auto.conf |
| INCS += -include $(AUDIO_ROOT)/config/sa6155autoconf.h |
| else |
| include $(AUDIO_ROOT)/config/sm6150auto.conf |
| INCS += -include $(AUDIO_ROOT)/config/sm6150autoconf.h |
| endif |
| endif |
| ifeq ($(CONFIG_ARCH_TRINKET), y) |
| include $(AUDIO_ROOT)/config/sm6150auto.conf |
| INCS += -include $(AUDIO_ROOT)/config/sm6150autoconf.h |
| endif |
| ifeq ($(CONFIG_ARCH_KONA), y) |
| include $(AUDIO_ROOT)/config/konaauto.conf |
| INCS += -include $(AUDIO_ROOT)/config/konaautoconf.h |
| endif |
| ifeq ($(CONFIG_ARCH_LITO), y) |
| include $(AUDIO_ROOT)/config/litoauto.conf |
| INCS += -include $(AUDIO_ROOT)/config/litoautoconf.h |
| endif |
| ifeq ($(CONFIG_ARCH_BENGAL), y) |
| include $(AUDIO_ROOT)/config/bengalauto.conf |
| INCS += -include $(AUDIO_ROOT)/config/bengalautoconf.h |
| endif |
| ifeq ($(CONFIG_ARCH_SM8150), y) |
| ifdef CONFIG_SND_SOC_SA8155 |
| include $(AUDIO_ROOT)/config/sa8155auto.conf |
| INCS += -include $(AUDIO_ROOT)/config/sa8155autoconf.h |
| else |
| include $(AUDIO_ROOT)/config/sm8150auto.conf |
| INCS += -include $(AUDIO_ROOT)/config/sm8150autoconf.h |
| endif |
| endif |
| ifeq ($(CONFIG_ARCH_SDMSHRIKE), y) |
| ifdef CONFIG_SND_SOC_SA8155 |
| include $(AUDIO_ROOT)/config/sa8155auto.conf |
| INCS += -include $(AUDIO_ROOT)/config/sa8155autoconf.h |
| else |
| include $(AUDIO_ROOT)/config/sm8150auto.conf |
| INCS += -include $(AUDIO_ROOT)/config/sm8150autoconf.h |
| endif |
| endif |
| ifeq ($(CONFIG_ARCH_QCS405), y) |
| include $(AUDIO_ROOT)/config/qcs405auto.conf |
| INCS += -include $(AUDIO_ROOT)/config/qcs405autoconf.h |
| endif |
| ifeq ($(CONFIG_QTI_GVM), y) |
| include $(AUDIO_ROOT)/config/gvmauto.conf |
| INCS += -include $(AUDIO_ROOT)/config/gvmautoconf.h |
| endif |
| ifeq ($(CONFIG_ARCH_SDM660), y) |
| include $(AUDIO_ROOT)/config/sdm660auto.conf |
| INCS += -include $(AUDIO_ROOT)/config/sdm660autoconf.h |
| endif |
| endif |
| |
| |
| |
| # As per target team, build is done as follows: |
| # Defconfig : build with default flags |
| # Slub : defconfig + CONFIG_SLUB_DEBUG := y + |
| # CONFIG_SLUB_DEBUG_ON := y + CONFIG_PAGE_POISONING := y |
| # Perf : Using appropriate msmXXXX-perf_defconfig |
| # |
| # Shipment builds (user variants) should not have any debug feature |
| # enabled. This is identified using 'TARGET_BUILD_VARIANT'. Slub builds |
| # are identified using the CONFIG_SLUB_DEBUG_ON configuration. Since |
| # there is no other way to identify defconfig builds, QTI internal |
| # representation of perf builds (identified using the string 'perf'), |
| # is used to identify if the build is a slub or defconfig one. This |
| # way no critical debug feature will be enabled for perf and shipment |
| # builds. Other OEMs are also protected using the TARGET_BUILD_VARIANT |
| # config. |
| |
| ############ UAPI ############ |
| UAPI_DIR := uapi |
| UAPI_INC := -I$(AUDIO_ROOT)/include/$(UAPI_DIR) |
| |
| ############ COMMON ############ |
| COMMON_DIR := include |
| COMMON_INC := -I$(AUDIO_ROOT)/$(COMMON_DIR) |
| |
| ############ QDSP6V2 ############ |
| |
| ifdef CONFIG_SND_SOC_MSM_QDSP6V2_INTF |
| Q6_OBJS += msm-audio-event-notify.o |
| Q6_OBJS += audio_calibration.o |
| Q6_OBJS += audio_cal_utils.o |
| Q6_OBJS += q6adm.o |
| Q6_OBJS += q6afe.o |
| Q6_OBJS += q6asm.o |
| Q6_OBJS += q6audio-v2.o |
| Q6_OBJS += q6voice.o |
| Q6_OBJS += q6core.o |
| Q6_OBJS += q6common.o |
| Q6_OBJS += rtac.o |
| Q6_OBJS += q6lsm.o |
| Q6_OBJS += adsp_err.o |
| Q6_OBJS += msm_audio_ion.o |
| Q6_OBJS += avtimer.o |
| Q6_OBJS += q6_init.o |
| endif |
| |
| ifdef CONFIG_SND_SOC_MSM_QDSP6V2_VM |
| Q6_OBJS += msm-audio-event-notify.o |
| Q6_OBJS += audio_calibration.o |
| Q6_OBJS += audio_cal_utils.o |
| Q6_OBJS += q6adm.o |
| Q6_OBJS += q6afe.o |
| Q6_OBJS += q6asm.o |
| Q6_OBJS += q6audio-v2.o |
| Q6_OBJS += q6voice.o |
| Q6_OBJS += q6core.o |
| Q6_OBJS += q6common.o |
| Q6_OBJS += rtac.o |
| Q6_OBJS += q6lsm.o |
| Q6_OBJS += adsp_err.o |
| Q6_OBJS += msm_audio_ion_vm.o |
| Q6_OBJS += avtimer.o |
| Q6_OBJS += q6_init.o |
| endif |
| |
| ifdef CONFIG_XT_LOGGING |
| Q6_OBJS += sp_params.o |
| endif |
| |
| ifdef CONFIG_WCD9XXX_CODEC_CORE |
| Q6_OBJS += audio_slimslave.o |
| endif |
| |
| ifdef CONFIG_DTS_SRS_TM |
| Q6_OBJS += msm-dts-srs-tm-config.o |
| endif |
| |
| ifdef CONFIG_AFE_HWDEP |
| Q6_OBJS += q6afecal-hwdep.o |
| endif |
| |
| ifdef CONFIG_MSM_ADSP_LOADER |
| ADSP_LOADER_OBJS += adsp-loader.o |
| endif |
| |
| ifdef CONFIG_MSM_QDSP6_PDR |
| QDSP6_PDR_OBJS += audio_pdr.o |
| endif |
| |
| ifdef CONFIG_MSM_QDSP6_NOTIFIER |
| QDSP6_NOTIFIER_OBJS += audio_notifier.o audio_ssr.o |
| endif |
| |
| ifdef CONFIG_MSM_ULTRASOUND |
| USF_OBJS += usf.o usfcdev.o q6usm.o |
| endif |
| |
| ifdef CONFIG_MSM_MDF |
| Q6_OBJS += msm_mdf.o |
| endif |
| |
| ifdef CONFIG_VOICE_MHI |
| Q6_OBJS += voice_mhi.o |
| endif |
| |
| ifdef CONFIG_DIGITAL_CDC_RSC_MGR |
| Q6_OBJS += digital-cdc-rsc-mgr.o |
| endif |
| |
| LINUX_INC += -Iinclude/linux |
| |
| INCS += $(COMMON_INC) \ |
| $(UAPI_INC) |
| |
| EXTRA_CFLAGS += $(INCS) |
| |
| |
| CDEFINES += -DANI_LITTLE_BYTE_ENDIAN \ |
| -DANI_LITTLE_BIT_ENDIAN \ |
| -DDOT11F_LITTLE_ENDIAN_HOST \ |
| -DANI_COMPILER_TYPE_GCC \ |
| -DANI_OS_TYPE_ANDROID=6 \ |
| -DPTT_SOCK_SVC_ENABLE \ |
| -Wall\ |
| -D__linux__ |
| |
| KBUILD_CPPFLAGS += $(CDEFINES) |
| |
| # Currently, for versions of gcc which support it, the kernel Makefile |
| # is disabling the maybe-uninitialized warning. Re-enable it for the |
| # AUDIO driver. Note that we must use EXTRA_CFLAGS here so that it |
| # will override the kernel settings. |
| ifeq ($(call cc-option-yn, -Wmaybe-uninitialized),y) |
| EXTRA_CFLAGS += -Wmaybe-uninitialized |
| endif |
| #EXTRA_CFLAGS += -Wmissing-prototypes |
| |
| ifeq ($(call cc-option-yn, -Wheader-guard),y) |
| EXTRA_CFLAGS += -Wheader-guard |
| endif |
| |
| # If the module name is not "wlan", then the define MULTI_IF_NAME to be the |
| # same a the QCA CHIP name. The host driver will then append MULTI_IF_NAME to |
| # any string that must be unique for all instances of the driver on the system. |
| # This allows multiple instances of the driver with different module names. |
| # If the module name is wlan, leave MULTI_IF_NAME undefined and the code will |
| # treat the driver as the primary driver. |
| ifneq ($(MODNAME), qdsp6v2) |
| CHIP_NAME ?= $(MODNAME) |
| CDEFINES += -DMULTI_IF_NAME=\"$(CHIP_NAME)\" |
| endif |
| |
| ifeq ($(KERNEL_BUILD), 0) |
| KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/ipc/Module.symvers |
| endif |
| |
| ifeq ($(KERNEL_BUILD), 1) |
| obj-y += codecs/ |
| endif |
| |
| obj-$(CONFIG_SND_SOC_MSM_QDSP6V2_INTF) += q6_dlkm.o |
| q6_dlkm-y := $(Q6_OBJS) |
| |
| obj-$(CONFIG_SND_SOC_MSM_QDSP6V2_VM) += q6_dlkm.o |
| q6_dlkm-y := $(Q6_OBJS) |
| |
| obj-$(CONFIG_MSM_ULTRASOUND) += usf_dlkm.o |
| usf_dlkm-y := $(USF_OBJS) |
| |
| obj-$(CONFIG_MSM_ADSP_LOADER) += adsp_loader_dlkm.o |
| adsp_loader_dlkm-y := $(ADSP_LOADER_OBJS) |
| |
| obj-$(CONFIG_MSM_QDSP6_PDR) += q6_pdr_dlkm.o |
| q6_pdr_dlkm-y := $(QDSP6_PDR_OBJS) |
| |
| obj-$(CONFIG_MSM_QDSP6_NOTIFIER) += q6_notifier_dlkm.o |
| q6_notifier_dlkm-y := $(QDSP6_NOTIFIER_OBJS) |