Audio: DLKM support for all audio modules
Switch to DLKM for all audio kernel modules.
Change-Id: I6a96023a21f655f873531af9ace81f2b01eb0f58
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
diff --git a/dsp/Kbuild b/dsp/Kbuild
new file mode 100644
index 0000000..8772085
--- /dev/null
+++ b/dsp/Kbuild
@@ -0,0 +1,149 @@
+# We can build either as part of a standalone Kernel build or as
+# an external module. Determine which mechanism is being used
+KERNEL_BUILD := 0
+
+
+ifeq ($(KERNEL_BUILD), 0)
+ # These are configurable via Kconfig for kernel-based builds
+ # Need to explicitly configure for Android-based builds
+ ifeq ($(CONFIG_ARCH_SDM845), y)
+ include $(AUDIO_ROOT)/config/sdm845auto.conf
+ export
+ endif
+ ifeq ($(CONFIG_ARCH_SDM670), y)
+ include $(AUDIO_ROOT)/config/sdm670auto.conf
+ export
+ endif
+endif
+
+
+# As per target team, build is done as follows:
+# Defconfig : build with default flags
+# Slub : defconfig + CONFIG_SLUB_DEBUG := y +
+# CONFIG_SLUB_DEBUG_ON := y + CONFIG_PAGE_POISONING := y
+# Perf : Using appropriate msmXXXX-perf_defconfig
+#
+# Shipment builds (user variants) should not have any debug feature
+# enabled. This is identified using 'TARGET_BUILD_VARIANT'. Slub builds
+# are identified using the CONFIG_SLUB_DEBUG_ON configuration. Since
+# there is no other way to identify defconfig builds, QTI internal
+# representation of perf builds (identified using the string 'perf'),
+# is used to identify if the build is a slub or defconfig one. This
+# way no critical debug feature will be enabled for perf and shipment
+# builds. Other OEMs are also protected using the TARGET_BUILD_VARIANT
+# config.
+
+############ UAPI ############
+UAPI_DIR := uapi
+UAPI_INC := -I$(AUDIO_ROOT)/include/$(UAPI_DIR)
+
+############ COMMON ############
+COMMON_DIR := include
+COMMON_INC := -I$(AUDIO_ROOT)/$(COMMON_DIR)
+
+############ QDSP6V2 ############
+
+ifeq ($(CONFIG_SND_SOC_MSM_QDSP6V2_INTF), m)
+ Q6_OBJS += audio_calibration.o
+ Q6_OBJS += audio_cal_utils.o
+ Q6_OBJS += msm-dts-srs-tm-config.o
+ Q6_OBJS += q6adm.o
+ Q6_OBJS += q6afe.o
+ Q6_OBJS += q6asm.o
+ Q6_OBJS += q6audio-v2.o
+ Q6_OBJS += q6voice.o
+ Q6_OBJS += q6core.o
+ Q6_OBJS += rtac.o
+ Q6_OBJS += q6lsm.o
+ Q6_OBJS += audio_slimslave.o
+ Q6_OBJS += adsp_err.o
+ Q6_OBJS += msm_audio_ion.o
+ Q6_OBJS += avtimer.o
+ Q6_OBJS += q6_init.o
+endif
+ifeq ($(CONFIG_MSM_ADSP_LOADER), m)
+ADSP_LOADER_OBJS += adsp-loader.o
+endif
+
+ifeq ($(CONFIG_MSM_QDSP6_NOTIFIER), m)
+QDSP6_NOTIFIER_OBJS += audio_notifier.o audio_ssr.o
+endif
+
+ifeq ($(CONFIG_MSM_QDSP6_PDR), m)
+QDSP6_PDR_OBJS += audio_pdr.o
+endif
+
+ifeq ($(CONFIG_MSM_ULTRASOUND), m)
+USF_OBJS += usf.o usfcdev.o q6usm.o
+endif
+
+LINUX_INC += -Iinclude/linux
+
+INCS := $(COMMON_INC) \
+ $(UAPI_INC)
+
+ifeq ($(CONFIG_ARCH_SDM845), y)
+INCS += -include $(AUDIO_ROOT)/config/sdm845autoconf.h
+endif
+ifeq ($(CONFIG_ARCH_SDM670), y)
+INCS += -include $(AUDIO_ROOT)/config/sdm670autoconf.h
+endif
+
+EXTRA_CFLAGS += $(INCS)
+
+
+CDEFINES += -DANI_LITTLE_BYTE_ENDIAN \
+ -DANI_LITTLE_BIT_ENDIAN \
+ -DDOT11F_LITTLE_ENDIAN_HOST \
+ -DANI_COMPILER_TYPE_GCC \
+ -DANI_OS_TYPE_ANDROID=6 \
+ -DPTT_SOCK_SVC_ENABLE \
+ -Wall\
+ -Werror\
+ -D__linux__
+
+KBUILD_CPPFLAGS += $(CDEFINES)
+
+# Currently, for versions of gcc which support it, the kernel Makefile
+# is disabling the maybe-uninitialized warning. Re-enable it for the
+# AUDIO driver. Note that we must use EXTRA_CFLAGS here so that it
+# will override the kernel settings.
+ifeq ($(call cc-option-yn, -Wmaybe-uninitialized),y)
+EXTRA_CFLAGS += -Wmaybe-uninitialized
+endif
+#EXTRA_CFLAGS += -Wmissing-prototypes
+
+ifeq ($(call cc-option-yn, -Wheader-guard),y)
+EXTRA_CFLAGS += -Wheader-guard
+endif
+
+# If the module name is not "wlan", then the define MULTI_IF_NAME to be the
+# same a the QCA CHIP name. The host driver will then append MULTI_IF_NAME to
+# any string that must be unique for all instances of the driver on the system.
+# This allows multiple instances of the driver with different module names.
+# If the module name is wlan, leave MULTI_IF_NAME undefined and the code will
+# treat the driver as the primary driver.
+ifneq ($(MODNAME), qdsp6v2)
+CHIP_NAME ?= $(MODNAME)
+CDEFINES += -DMULTI_IF_NAME=\"$(CHIP_NAME)\"
+endif
+
+KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/ipc/Module.symvers
+
+obj-$(CONFIG_SND_SOC_MSM_QDSP6V2_INTF) += q6_dlkm.o
+q6_dlkm-y := $(Q6_OBJS)
+
+obj-$(CONFIG_MSM_ULTRASOUND) += usf_dlkm.o
+usf_dlkm-y := $(USF_OBJS)
+
+obj-$(CONFIG_MSM_ADSP_LOADER) += adsp_loader_dlkm.o
+adsp_loader_dlkm-y := $(ADSP_LOADER_OBJS)
+
+obj-$(CONFIG_MSM_QDSP6_NOTIFIER) += q6_notifier_dlkm.o
+q6_notifier_dlkm-y := $(QDSP6_NOTIFIER_OBJS)
+
+obj-$(CONFIG_MSM_QDSP6_PDR) += q6_pdr_dlkm.o
+q6_pdr_dlkm-y := $(QDSP6_PDR_OBJS)
+
+# inject some build related information
+DEFINES += -DBUILD_TIMESTAMP=\"$(shell date -u +'%Y-%m-%dT%H:%M:%SZ')\"