blob: b2c2a72331deb50bad9e27d1e555f12d04fb7870 [file] [log] [blame]
# We can build either as part of a standalone Kernel build or as
# an external module. Determine which mechanism is being used
ifeq ($(MODNAME),)
KERNEL_BUILD := 1
else
KERNEL_BUILD := 0
endif
TARGET_KERNEL_VERSION := 4.9
# These are configurable via Kconfig for kernel-based builds
# Need to explicitly configure for Android-based builds
ifeq ($(CONFIG_ARCH_SDM845), y)
TARGET_KERNEL_VERSION := 4.9
endif
ifeq ($(CONFIG_ARCH_SDM670), y)
TARGET_KERNEL_VERSION := 4.9
endif
ifeq ($(CONFIG_ARCH_SDM450), y)
TARGET_KERNEL_VERSION := 4.9
endif
ifeq ($(CONFIG_ARCH_SDM439), y)
TARGET_KERNEL_VERSION := 4.9
endif
ifeq ($(CONFIG_ARCH_MSM8909), y)
TARGET_KERNEL_VERSION := 4.9
endif
ifeq ($(CONFIG_ARCH_MSM8917), y)
TARGET_KERNEL_VERSION := 4.9
endif
KDIR := $(TOP)/kernel/msm-$(TARGET_KERNEL_VERSION)
ifeq ($(KERNEL_BUILD), 1)
AUDIO_ROOT := $(KDIR)/techpack/audio
endif
ifeq ($(KERNEL_BUILD), 0)
ifeq ($(CONFIG_ARCH_SDM845), y)
include $(AUDIO_ROOT)/config/sdm845auto.conf
export
INCS += -include $(AUDIO_ROOT)/config/sdm845autoconf.h
endif
ifeq ($(CONFIG_ARCH_SDM670), y)
include $(AUDIO_ROOT)/config/sdm710auto.conf
export
INCS += -include $(AUDIO_ROOT)/config/sdm710autoconf.h
endif
ifeq ($(CONFIG_ARCH_SDM450), y)
include $(AUDIO_ROOT)/config/sdm450auto.conf
export
INCS += -include $(AUDIO_ROOT)/config/sdm450autoconf.h
endif
ifeq ($(CONFIG_ARCH_SDM439), y)
include $(AUDIO_ROOT)/config/sdm450auto.conf
export
INCS += -include $(AUDIO_ROOT)/config/sdm450autoconf.h
endif
ifeq ($(CONFIG_ARCH_MSM8909), y)
include $(AUDIO_ROOT)/config/msm8909auto.conf
export
INCS += -include $(AUDIO_ROOT)/config/msm8909autoconf.h
endif
ifeq ($(CONFIG_ARCH_MSM8917), y)
include $(AUDIO_ROOT)/config/sdm450auto.conf
export
INCS += -include $(AUDIO_ROOT)/config/sdm450autoconf.h
endif
endif
# As per target team, build is done as follows:
# Defconfig : build with default flags
# Slub : defconfig + CONFIG_SLUB_DEBUG := y +
# CONFIG_SLUB_DEBUG_ON := y + CONFIG_PAGE_POISONING := y
# Perf : Using appropriate msmXXXX-perf_defconfig
#
# Shipment builds (user variants) should not have any debug feature
# enabled. This is identified using 'TARGET_BUILD_VARIANT'. Slub builds
# are identified using the CONFIG_SLUB_DEBUG_ON configuration. Since
# there is no other way to identify defconfig builds, QTI internal
# representation of perf builds (identified using the string 'perf'),
# is used to identify if the build is a slub or defconfig one. This
# way no critical debug feature will be enabled for perf and shipment
# builds. Other OEMs are also protected using the TARGET_BUILD_VARIANT
# config.
############ UAPI ############
UAPI_DIR := uapi
UAPI_INC := -I$(AUDIO_ROOT)/include/$(UAPI_DIR)
############ COMMON ############
COMMON_DIR := include
COMMON_INC := -I$(AUDIO_ROOT)/$(COMMON_DIR)
############ IPC ############
ifdef CONFIG_MSM_QDSP6_APRV2
APRV_GLINK += apr.o
APRV_GLINK += apr_v2.o
APRV_GLINK += apr_tal.o
APRV_GLINK += apr_dummy.o
endif
ifdef CONFIG_MSM_QDSP6_APRV3
APRV_GLINK += apr.o
APRV_GLINK += apr_v3.o
APRV_GLINK += apr_tal.o
APRV_GLINK += apr_dummy.o
endif
ifdef CONFIG_MSM_QDSP6_APRV2_GLINK
APRV_GLINK += apr.o
APRV_GLINK += apr_v2.o
APRV_GLINK += apr_tal_glink.o
APRV_GLINK += apr_dummy.o
endif
ifdef CONFIG_MSM_QDSP6_APRV3_GLINK
APRV_GLINK += apr.o
APRV_GLINK += apr_v3.o
APRV_GLINK += apr_tal_glink.o
APRV_GLINK += apr_dummy.o
endif
ifeq ($(CONFIG_ARCH_MSM8909), $(CONFIG_MSM_BGCOM))
ifdef CONFIG_MSM_BG_GLINK
BG_GLINK += bg_glink.o
endif
endif
ifdef CONFIG_WCD_DSP_GLINK
WDSP_GLINK += wcd-dsp-glink.o
endif
LINUX_INC += -Iinclude/linux
INCS += $(COMMON_INC) \
$(UAPI_INC)
EXTRA_CFLAGS += $(INCS)
CDEFINES += -DANI_LITTLE_BYTE_ENDIAN \
-DANI_LITTLE_BIT_ENDIAN \
-DDOT11F_LITTLE_ENDIAN_HOST \
-DANI_COMPILER_TYPE_GCC \
-DANI_OS_TYPE_ANDROID=6 \
-DPTT_SOCK_SVC_ENABLE \
-Wall\
-Werror\
-D__linux__
KBUILD_CPPFLAGS += $(CDEFINES)
ifeq ($(KERNEL_BUILD), 0)
HEADER_INSTALL_DIR := $(TOP)/kernel/msm-$(TARGET_KERNEL_VERSION)/scripts
UAPI_OUT := $(OUT)/obj/vendor/qcom/opensource/audio-kernel/include
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/linux/ $(AUDIO_ROOT)/include/uapi/linux/ avtimer.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/linux/ $(AUDIO_ROOT)/include/uapi/linux/ msm_audio.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/linux/ $(AUDIO_ROOT)/include/uapi/linux/ msm_audio_aac.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/linux/ $(AUDIO_ROOT)/include/uapi/linux/ msm_audio_ac3.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/linux/ $(AUDIO_ROOT)/include/uapi/linux/ msm_audio_alac.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/linux/ $(AUDIO_ROOT)/include/uapi/linux/ msm_audio_amrnb.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/linux/ $(AUDIO_ROOT)/include/uapi/linux/ msm_audio_amrwb.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/linux/ $(AUDIO_ROOT)/include/uapi/linux/ msm_audio_amrwbplus.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/linux/ $(AUDIO_ROOT)/include/uapi/linux/ msm_audio_ape.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/linux/ $(AUDIO_ROOT)/include/uapi/linux/ msm_audio_calibration.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/linux/ $(AUDIO_ROOT)/include/uapi/linux/ msm_audio_g711_dec.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/linux/ $(AUDIO_ROOT)/include/uapi/linux/ msm_audio_g711.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/linux/ $(AUDIO_ROOT)/include/uapi/linux/ msm_audio_mvs.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/linux/ $(AUDIO_ROOT)/include/uapi/linux/ msm_audio_qcp.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/linux/ $(AUDIO_ROOT)/include/uapi/linux/ msm_audio_sbc.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/linux/ $(AUDIO_ROOT)/include/uapi/linux/ msm_audio_voicememo.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/linux/ $(AUDIO_ROOT)/include/uapi/linux/ msm_audio_wma.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/linux/ $(AUDIO_ROOT)/include/uapi/linux/ msm_audio_wmapro.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/sound/ $(AUDIO_ROOT)/include/uapi/sound/ audio_effects.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/sound/ $(AUDIO_ROOT)/include/uapi/sound/ audio_slimslave.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/sound/ $(AUDIO_ROOT)/include/uapi/sound/ devdep_params.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/sound/ $(AUDIO_ROOT)/include/uapi/sound/ lsm_params.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/sound/ $(AUDIO_ROOT)/include/uapi/sound/ msmcal-hwdep.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/sound/ $(AUDIO_ROOT)/include/uapi/sound/ voice_params.h;)
$(shell $(HEADER_INSTALL_DIR)/headers_install.sh $(UAPI_OUT)/sound/ $(AUDIO_ROOT)/include/uapi/sound/ wcd-dsp-glink.h;)
KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/dsp/Module.symvers
endif
# Currently, for versions of gcc which support it, the kernel Makefile
# is disabling the maybe-uninitialized warning. Re-enable it for the
# AUDIO driver. Note that we must use EXTRA_CFLAGS here so that it
# will override the kernel settings.
ifeq ($(call cc-option-yn, -Wmaybe-uninitialized),y)
EXTRA_CFLAGS += -Wmaybe-uninitialized
endif
#EXTRA_CFLAGS += -Wmissing-prototypes
ifeq ($(call cc-option-yn, -Wheader-guard),y)
EXTRA_CFLAGS += -Wheader-guard
endif
# If the module name is not "wlan", then the define MULTI_IF_NAME to be the
# same a the QCA CHIP name. The host driver will then append MULTI_IF_NAME to
# any string that must be unique for all instances of the driver on the system.
# This allows multiple instances of the driver with different module names.
# If the module name is wlan, leave MULTI_IF_NAME undefined and the code will
# treat the driver as the primary driver.
ifneq ($(MODNAME), qdsp6v2)
CHIP_NAME ?= $(MODNAME)
CDEFINES += -DMULTI_IF_NAME=\"$(CHIP_NAME)\"
endif
# Module information used by KBuild framework
obj-$(CONFIG_MSM_QDSP6_APRV2) += apr_dlkm.o
obj-$(CONFIG_MSM_QDSP6_APRV3) += apr_dlkm.o
obj-$(CONFIG_MSM_QDSP6_APRV2_GLINK) += apr_dlkm.o
obj-$(CONFIG_MSM_QDSP6_APRV3_GLINK) += apr_dlkm.o
apr_dlkm-y := $(APRV_GLINK)
ifeq ($(CONFIG_ARCH_MSM8909), $(CONFIG_MSM_BGCOM))
obj-$(CONFIG_MSM_BG_GLINK) += bg_glink_dlkm.o
bg_glink_dlkm-y := $(BG_GLINK)
endif
obj-$(CONFIG_WCD_DSP_GLINK) += wglink_dlkm.o
wglink_dlkm-y := $(WDSP_GLINK)
# inject some build related information
CDEFINES += -DBUILD_TIMESTAMP=\"$(shell date -u +'%Y-%m-%dT%H:%M:%SZ')\"