Asish Bhattacharya | 8e2277f | 2017-07-20 18:31:55 +0530 | [diff] [blame] | 1 | /* Copyright (c) 2012-2017, The Linux Foundation. All rights reserved. |
| 2 | * |
| 3 | * This program is free software; you can redistribute it and/or modify |
| 4 | * it under the terms of the GNU General Public License version 2 and |
| 5 | * only version 2 as published by the Free Software Foundation. |
| 6 | * |
| 7 | * This program is distributed in the hope that it will be useful, |
| 8 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 9 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 10 | * GNU General Public License for more details. |
| 11 | */ |
| 12 | |
| 13 | |
| 14 | #ifndef _APR_AUDIO_V2_H_ |
| 15 | #define _APR_AUDIO_V2_H_ |
| 16 | |
Laxminath Kasam | 605b42f | 2017-08-01 22:02:15 +0530 | [diff] [blame] | 17 | #include <ipc/apr.h> |
Asish Bhattacharya | 8e2277f | 2017-07-20 18:31:55 +0530 | [diff] [blame] | 18 | #include <linux/msm_audio.h> |
| 19 | |
| 20 | /* size of header needed for passing data out of band */ |
| 21 | #define APR_CMD_OB_HDR_SZ 12 |
| 22 | |
| 23 | /* size of header needed for getting data */ |
| 24 | #define APR_CMD_GET_HDR_SZ 16 |
| 25 | |
| 26 | struct param_outband { |
| 27 | size_t size; |
| 28 | void *kvaddr; |
| 29 | phys_addr_t paddr; |
| 30 | }; |
| 31 | |
| 32 | #define ADSP_ADM_VERSION 0x00070000 |
| 33 | |
| 34 | #define ADM_CMD_SHARED_MEM_MAP_REGIONS 0x00010322 |
| 35 | #define ADM_CMDRSP_SHARED_MEM_MAP_REGIONS 0x00010323 |
| 36 | #define ADM_CMD_SHARED_MEM_UNMAP_REGIONS 0x00010324 |
| 37 | |
| 38 | #define ADM_CMD_MATRIX_MAP_ROUTINGS_V5 0x00010325 |
| 39 | #define ADM_CMD_STREAM_DEVICE_MAP_ROUTINGS_V5 0x0001033D |
| 40 | /* Enumeration for an audio Rx matrix ID.*/ |
| 41 | #define ADM_MATRIX_ID_AUDIO_RX 0 |
| 42 | |
| 43 | #define ADM_MATRIX_ID_AUDIO_TX 1 |
| 44 | |
| 45 | #define ADM_MATRIX_ID_COMPRESSED_AUDIO_RX 2 |
| 46 | |
| 47 | #define ADM_MATRIX_ID_COMPRESSED_AUDIO_TX 3 |
| 48 | |
| 49 | #define ADM_MATRIX_ID_LISTEN_TX 4 |
| 50 | /* Enumeration for an audio Tx matrix ID.*/ |
| 51 | #define ADM_MATRIX_ID_AUDIOX 1 |
| 52 | |
| 53 | #define ADM_MAX_COPPS 5 |
| 54 | |
| 55 | /* make sure this matches with msm_audio_calibration */ |
| 56 | #define SP_V2_NUM_MAX_SPKR 2 |
| 57 | |
| 58 | /* Session map node structure. |
| 59 | * Immediately following this structure are num_copps |
| 60 | * entries of COPP IDs. The COPP IDs are 16 bits, so |
| 61 | * there might be a padding 16-bit field if num_copps |
| 62 | * is odd. |
| 63 | */ |
| 64 | struct adm_session_map_node_v5 { |
| 65 | u16 session_id; |
| 66 | /* Handle of the ASM session to be routed. Supported values: 1 |
| 67 | * to 8. |
| 68 | */ |
| 69 | |
| 70 | |
| 71 | u16 num_copps; |
| 72 | /* Number of COPPs to which this session is to be routed. |
| 73 | * Supported values: 0 < num_copps <= ADM_MAX_COPPS. |
| 74 | */ |
| 75 | } __packed; |
| 76 | |
| 77 | /* Payload of the #ADM_CMD_MATRIX_MAP_ROUTINGS_V5 command. |
| 78 | * Immediately following this structure are num_sessions of the session map |
| 79 | * node payload (adm_session_map_node_v5). |
| 80 | */ |
| 81 | |
| 82 | struct adm_cmd_matrix_map_routings_v5 { |
| 83 | struct apr_hdr hdr; |
| 84 | |
| 85 | u32 matrix_id; |
| 86 | /* Specifies whether the matrix ID is Audio Rx (0) or Audio Tx |
| 87 | * (1). Use the ADM_MATRIX_ID_AUDIO_RX or ADM_MATRIX_ID_AUDIOX |
| 88 | * macros to set this field. |
| 89 | */ |
| 90 | u32 num_sessions; |
| 91 | /* Number of sessions being updated by this command (optional). */ |
| 92 | } __packed; |
| 93 | |
| 94 | /* This command allows a client to open a COPP/Voice Proc. TX module |
| 95 | * and sets up the device session: Matrix -> COPP -> AFE on the RX |
| 96 | * and AFE -> COPP -> Matrix on the TX. This enables PCM data to |
| 97 | * be transferred to/from the endpoint (AFEPortID). |
| 98 | * |
| 99 | * @return |
| 100 | * #ADM_CMDRSP_DEVICE_OPEN_V5 with the resulting status and COPP ID. |
| 101 | */ |
| 102 | #define ADM_CMD_DEVICE_OPEN_V5 0x00010326 |
| 103 | |
| 104 | /* This command allows a client to open a COPP/Voice Proc the |
| 105 | * way as ADM_CMD_DEVICE_OPEN_V5 but supports multiple endpoint2 |
| 106 | * channels. |
| 107 | * |
| 108 | * @return |
| 109 | * #ADM_CMDRSP_DEVICE_OPEN_V6 with the resulting status and |
| 110 | * COPP ID. |
| 111 | */ |
| 112 | #define ADM_CMD_DEVICE_OPEN_V6 0x00010356 |
| 113 | |
| 114 | /* Definition for a low latency stream session. */ |
| 115 | #define ADM_LOW_LATENCY_DEVICE_SESSION 0x2000 |
| 116 | |
| 117 | /* Definition for a ultra low latency stream session. */ |
| 118 | #define ADM_ULTRA_LOW_LATENCY_DEVICE_SESSION 0x4000 |
| 119 | |
| 120 | /* Definition for a ultra low latency with Post Processing stream session. */ |
| 121 | #define ADM_ULL_POST_PROCESSING_DEVICE_SESSION 0x8000 |
| 122 | |
| 123 | /* Definition for a legacy device session. */ |
| 124 | #define ADM_LEGACY_DEVICE_SESSION 0 |
| 125 | |
| 126 | /* Indicates that endpoint_id_2 is to be ignored.*/ |
| 127 | #define ADM_CMD_COPP_OPEN_END_POINT_ID_2_IGNORE 0xFFFF |
| 128 | |
| 129 | #define ADM_CMD_COPP_OPEN_MODE_OF_OPERATION_RX_PATH_COPP 1 |
| 130 | |
| 131 | #define ADM_CMD_COPP_OPEN_MODE_OF_OPERATIONX_PATH_LIVE_COPP 2 |
| 132 | |
| 133 | #define ADM_CMD_COPP_OPEN_MODE_OF_OPERATIONX_PATH_NON_LIVE_COPP 3 |
| 134 | |
| 135 | /* Indicates that an audio COPP is to send/receive a mono PCM |
| 136 | * stream to/from |
| 137 | * END_POINT_ID_1. |
| 138 | */ |
| 139 | #define ADM_CMD_COPP_OPEN_CHANNEL_CONFIG_MONO 1 |
| 140 | |
| 141 | /* Indicates that an audio COPP is to send/receive a |
| 142 | * stereo PCM stream to/from END_POINT_ID_1. |
| 143 | */ |
| 144 | #define ADM_CMD_COPP_OPEN_CHANNEL_CONFIG_STEREO 2 |
| 145 | |
| 146 | /* Sample rate is 8000 Hz.*/ |
| 147 | #define ADM_CMD_COPP_OPEN_SAMPLE_RATE_8K 8000 |
| 148 | |
| 149 | /* Sample rate is 16000 Hz.*/ |
| 150 | #define ADM_CMD_COPP_OPEN_SAMPLE_RATE_16K 16000 |
| 151 | |
| 152 | /* Sample rate is 48000 Hz.*/ |
| 153 | #define ADM_CMD_COPP_OPEN_SAMPLE_RATE_48K 48000 |
| 154 | |
| 155 | /* Definition for a COPP live input flag bitmask.*/ |
| 156 | #define ADM_BIT_MASK_COPP_LIVE_INPUT_FLAG (0x0001U) |
| 157 | |
| 158 | /* Definition for a COPP live shift value bitmask.*/ |
| 159 | #define ADM_SHIFT_COPP_LIVE_INPUT_FLAG 0 |
| 160 | |
| 161 | /* Definition for the COPP ID bitmask.*/ |
| 162 | #define ADM_BIT_MASK_COPP_ID (0x0000FFFFUL) |
| 163 | |
| 164 | /* Definition for the COPP ID shift value.*/ |
| 165 | #define ADM_SHIFT_COPP_ID 0 |
| 166 | |
| 167 | /* Definition for the service ID bitmask.*/ |
| 168 | #define ADM_BIT_MASK_SERVICE_ID (0x00FF0000UL) |
| 169 | |
| 170 | /* Definition for the service ID shift value.*/ |
| 171 | #define ADM_SHIFT_SERVICE_ID 16 |
| 172 | |
| 173 | /* Definition for the domain ID bitmask.*/ |
| 174 | #define ADM_BIT_MASK_DOMAIN_ID (0xFF000000UL) |
| 175 | |
| 176 | /* Definition for the domain ID shift value.*/ |
| 177 | #define ADM_SHIFT_DOMAIN_ID 24 |
| 178 | |
| 179 | /* ADM device open command payload of the |
| 180 | * #ADM_CMD_DEVICE_OPEN_V5 command. |
| 181 | */ |
| 182 | struct adm_cmd_device_open_v5 { |
| 183 | struct apr_hdr hdr; |
| 184 | u16 flags; |
| 185 | /* Reserved for future use. Clients must set this field |
| 186 | * to zero. |
| 187 | */ |
| 188 | |
| 189 | u16 mode_of_operation; |
| 190 | /* Specifies whether the COPP must be opened on the Tx or Rx |
| 191 | * path. Use the ADM_CMD_COPP_OPEN_MODE_OF_OPERATION_* macros for |
| 192 | * supported values and interpretation. |
| 193 | * Supported values: |
| 194 | * - 0x1 -- Rx path COPP |
| 195 | * - 0x2 -- Tx path live COPP |
| 196 | * - 0x3 -- Tx path nonlive COPP |
| 197 | * Live connections cause sample discarding in the Tx device |
| 198 | * matrix if the destination output ports do not pull them |
| 199 | * fast enough. Nonlive connections queue the samples |
| 200 | * indefinitely. |
| 201 | */ |
| 202 | |
| 203 | u16 endpoint_id_1; |
| 204 | /* Logical and physical endpoint ID of the audio path. |
| 205 | * If the ID is a voice processor Tx block, it receives near |
| 206 | * samples. Supported values: Any pseudoport, AFE Rx port, |
| 207 | * or AFE Tx port For a list of valid IDs, refer to |
| 208 | * @xhyperref{Q4,[Q4]}. |
| 209 | * Q4 = Hexagon Multimedia: AFE Interface Specification |
| 210 | */ |
| 211 | |
| 212 | u16 endpoint_id_2; |
| 213 | /* Logical and physical endpoint ID 2 for a voice processor |
| 214 | * Tx block. |
| 215 | * This is not applicable to audio COPP. |
| 216 | * Supported values: |
| 217 | * - AFE Rx port |
| 218 | * - 0xFFFF -- Endpoint 2 is unavailable and the voice |
| 219 | * processor Tx |
| 220 | * block ignores this endpoint |
| 221 | * When the voice processor Tx block is created on the audio |
| 222 | * record path, |
| 223 | * it can receive far-end samples from an AFE Rx port if the |
| 224 | * voice call |
| 225 | * is active. The ID of the AFE port is provided in this |
| 226 | * field. |
| 227 | * For a list of valid IDs, refer @xhyperref{Q4,[Q4]}. |
| 228 | */ |
| 229 | |
| 230 | u32 topology_id; |
| 231 | /* Audio COPP topology ID; 32-bit GUID. */ |
| 232 | |
| 233 | u16 dev_num_channel; |
| 234 | /* Number of channels the audio COPP sends to/receives from |
| 235 | * the endpoint. |
| 236 | * Supported values: 1 to 8. |
| 237 | * The value is ignored for the voice processor Tx block, |
| 238 | * where channel |
| 239 | * configuration is derived from the topology ID. |
| 240 | */ |
| 241 | |
| 242 | u16 bit_width; |
| 243 | /* Bit width (in bits) that the audio COPP sends to/receives |
| 244 | * from the |
| 245 | * endpoint. The value is ignored for the voice processing |
| 246 | * Tx block, |
| 247 | * where the PCM width is 16 bits. |
| 248 | */ |
| 249 | |
| 250 | u32 sample_rate; |
| 251 | /* Sampling rate at which the audio COPP/voice processor |
| 252 | * Tx block |
| 253 | * interfaces with the endpoint. |
| 254 | * Supported values for voice processor Tx: 8000, 16000, |
| 255 | * 48000 Hz |
| 256 | * Supported values for audio COPP: >0 and <=192 kHz |
| 257 | */ |
| 258 | |
| 259 | u8 dev_channel_mapping[8]; |
| 260 | /* Array of channel mapping of buffers that the audio COPP |
| 261 | * sends to the endpoint. Channel[i] mapping describes channel |
| 262 | * I inside the buffer, where 0 < i < dev_num_channel. |
| 263 | * This value is relevant only for an audio Rx COPP. |
| 264 | * For the voice processor block and Tx audio block, this field |
| 265 | * is set to zero and is ignored. |
| 266 | */ |
| 267 | } __packed; |
| 268 | |
| 269 | /* ADM device open command payload of the |
| 270 | * #ADM_CMD_DEVICE_OPEN_V6 command. |
| 271 | */ |
| 272 | struct adm_cmd_device_open_v6 { |
| 273 | struct apr_hdr hdr; |
| 274 | u16 flags; |
| 275 | /* Reserved for future use. Clients must set this field |
| 276 | * to zero. |
| 277 | */ |
| 278 | |
| 279 | u16 mode_of_operation; |
| 280 | /* Specifies whether the COPP must be opened on the Tx or Rx |
| 281 | * path. Use the ADM_CMD_COPP_OPEN_MODE_OF_OPERATION_* macros for |
| 282 | * supported values and interpretation. |
| 283 | * Supported values: |
| 284 | * - 0x1 -- Rx path COPP |
| 285 | * - 0x2 -- Tx path live COPP |
| 286 | * - 0x3 -- Tx path nonlive COPP |
| 287 | * Live connections cause sample discarding in the Tx device |
| 288 | * matrix if the destination output ports do not pull them |
| 289 | * fast enough. Nonlive connections queue the samples |
| 290 | * indefinitely. |
| 291 | */ |
| 292 | |
| 293 | u16 endpoint_id_1; |
| 294 | /* Logical and physical endpoint ID of the audio path. |
| 295 | * If the ID is a voice processor Tx block, it receives near |
| 296 | * samples. Supported values: Any pseudoport, AFE Rx port, |
| 297 | * or AFE Tx port For a list of valid IDs, refer to |
| 298 | * @xhyperref{Q4,[Q4]}. |
| 299 | * Q4 = Hexagon Multimedia: AFE Interface Specification |
| 300 | */ |
| 301 | |
| 302 | u16 endpoint_id_2; |
| 303 | /* Logical and physical endpoint ID 2 for a voice processor |
| 304 | * Tx block. |
| 305 | * This is not applicable to audio COPP. |
| 306 | * Supported values: |
| 307 | * - AFE Rx port |
| 308 | * - 0xFFFF -- Endpoint 2 is unavailable and the voice |
| 309 | * processor Tx |
| 310 | * block ignores this endpoint |
| 311 | * When the voice processor Tx block is created on the audio |
| 312 | * record path, |
| 313 | * it can receive far-end samples from an AFE Rx port if the |
| 314 | * voice call |
| 315 | * is active. The ID of the AFE port is provided in this |
| 316 | * field. |
| 317 | * For a list of valid IDs, refer @xhyperref{Q4,[Q4]}. |
| 318 | */ |
| 319 | |
| 320 | u32 topology_id; |
| 321 | /* Audio COPP topology ID; 32-bit GUID. */ |
| 322 | |
| 323 | u16 dev_num_channel; |
| 324 | /* Number of channels the audio COPP sends to/receives from |
| 325 | * the endpoint. |
| 326 | * Supported values: 1 to 8. |
| 327 | * The value is ignored for the voice processor Tx block, |
| 328 | * where channel |
| 329 | * configuration is derived from the topology ID. |
| 330 | */ |
| 331 | |
| 332 | u16 bit_width; |
| 333 | /* Bit width (in bits) that the audio COPP sends to/receives |
| 334 | * from the |
| 335 | * endpoint. The value is ignored for the voice processing |
| 336 | * Tx block, |
| 337 | * where the PCM width is 16 bits. |
| 338 | */ |
| 339 | |
| 340 | u32 sample_rate; |
| 341 | /* Sampling rate at which the audio COPP/voice processor |
| 342 | * Tx block |
| 343 | * interfaces with the endpoint. |
| 344 | * Supported values for voice processor Tx: 8000, 16000, |
| 345 | * 48000 Hz |
| 346 | * Supported values for audio COPP: >0 and <=192 kHz |
| 347 | */ |
| 348 | |
| 349 | u8 dev_channel_mapping[8]; |
| 350 | /* Array of channel mapping of buffers that the audio COPP |
| 351 | * sends to the endpoint. Channel[i] mapping describes channel |
| 352 | * I inside the buffer, where 0 < i < dev_num_channel. |
| 353 | * This value is relevant only for an audio Rx COPP. |
| 354 | * For the voice processor block and Tx audio block, this field |
| 355 | * is set to zero and is ignored. |
| 356 | */ |
| 357 | |
| 358 | u16 dev_num_channel_eid2; |
| 359 | /* Number of channels the voice processor block sends |
| 360 | * to/receives from the endpoint2. |
| 361 | * Supported values: 1 to 8. |
| 362 | * The value is ignored for audio COPP or if endpoint_id_2 is |
| 363 | * set to 0xFFFF. |
| 364 | */ |
| 365 | |
| 366 | u16 bit_width_eid2; |
| 367 | /* Bit width (in bits) that the voice processor sends |
| 368 | * to/receives from the endpoint2. |
| 369 | * Supported values: 16 and 24. |
| 370 | * The value is ignored for audio COPP or if endpoint_id_2 is |
| 371 | * set to 0xFFFF. |
| 372 | */ |
| 373 | |
| 374 | u32 sample_rate_eid2; |
| 375 | /* Sampling rate at which the voice processor Tx block |
| 376 | * interfaces with the endpoint2. |
| 377 | * Supported values for Tx voice processor: >0 and <=384 kHz |
| 378 | * The value is ignored for audio COPP or if endpoint_id_2 is |
| 379 | * set to 0xFFFF. |
| 380 | */ |
| 381 | |
| 382 | u8 dev_channel_mapping_eid2[8]; |
| 383 | /* Array of channel mapping of buffers that the voice processor |
| 384 | * sends to the endpoint. Channel[i] mapping describes channel |
| 385 | * I inside the buffer, where 0 < i < dev_num_channel. |
| 386 | * This value is relevant only for the Tx voice processor. |
| 387 | * The values are ignored for audio COPP or if endpoint_id_2 is |
| 388 | * set to 0xFFFF. |
| 389 | */ |
| 390 | } __packed; |
| 391 | |
| 392 | /* |
| 393 | * This command allows the client to close a COPP and disconnect |
| 394 | * the device session. |
| 395 | */ |
| 396 | #define ADM_CMD_DEVICE_CLOSE_V5 0x00010327 |
| 397 | |
| 398 | /* Sets one or more parameters to a COPP. */ |
| 399 | #define ADM_CMD_SET_PP_PARAMS_V5 0x00010328 |
| 400 | |
| 401 | /* Payload of the #ADM_CMD_SET_PP_PARAMS_V5 command. |
| 402 | * If the data_payload_addr_lsw and data_payload_addr_msw element |
| 403 | * are NULL, a series of adm_param_datastructures immediately |
| 404 | * follows, whose total size is data_payload_size bytes. |
| 405 | */ |
| 406 | struct adm_cmd_set_pp_params_v5 { |
| 407 | struct apr_hdr hdr; |
| 408 | u32 payload_addr_lsw; |
| 409 | /* LSW of parameter data payload address. */ |
| 410 | u32 payload_addr_msw; |
| 411 | /* MSW of parameter data payload address. */ |
| 412 | |
| 413 | u32 mem_map_handle; |
| 414 | /* Memory map handle returned by ADM_CMD_SHARED_MEM_MAP_REGIONS |
| 415 | * command |
| 416 | * |
| 417 | * If mem_map_handle is zero implies the message is in |
| 418 | * the payload |
| 419 | */ |
| 420 | |
| 421 | u32 payload_size; |
| 422 | /* Size in bytes of the variable payload accompanying this |
| 423 | * message or |
| 424 | * in shared memory. This is used for parsing the parameter |
| 425 | * payload. |
| 426 | */ |
| 427 | } __packed; |
| 428 | |
| 429 | /* Payload format for COPP parameter data. |
| 430 | * Immediately following this structure are param_size bytes |
| 431 | * of parameter |
| 432 | * data. |
| 433 | */ |
| 434 | struct adm_param_data_v5 { |
| 435 | u32 module_id; |
| 436 | /* Unique ID of the module. */ |
| 437 | u32 param_id; |
| 438 | /* Unique ID of the parameter. */ |
| 439 | u16 param_size; |
| 440 | /* Data size of the param_id/module_id combination. |
| 441 | * This value is a |
| 442 | * multiple of 4 bytes. |
| 443 | */ |
| 444 | u16 reserved; |
| 445 | /* Reserved for future enhancements. |
| 446 | * This field must be set to zero. |
| 447 | */ |
| 448 | } __packed; |
| 449 | |
| 450 | #define ASM_STREAM_CMD_REGISTER_PP_EVENTS 0x00013213 |
| 451 | #define ASM_STREAM_PP_EVENT 0x00013214 |
| 452 | #define ASM_STREAM_CMD_REGISTER_IEC_61937_FMT_UPDATE 0x13333 |
| 453 | #define ASM_IEC_61937_MEDIA_FMT_EVENT 0x13334 |
| 454 | |
| 455 | #define DSP_STREAM_CMD "ADSP Stream Cmd" |
| 456 | #define DSP_STREAM_CALLBACK "ADSP Stream Callback Event" |
| 457 | #define DSP_STREAM_CALLBACK_QUEUE_SIZE 1024 |
| 458 | |
| 459 | struct dsp_stream_callback_list { |
| 460 | struct list_head list; |
| 461 | struct msm_adsp_event_data event; |
| 462 | }; |
| 463 | |
| 464 | struct dsp_stream_callback_prtd { |
| 465 | uint16_t event_count; |
| 466 | struct list_head event_queue; |
| 467 | spinlock_t prtd_spin_lock; |
| 468 | }; |
| 469 | |
| 470 | /* set customized mixing on matrix mixer */ |
| 471 | #define ADM_CMD_SET_PSPD_MTMX_STRTR_PARAMS_V5 0x00010344 |
| 472 | struct adm_cmd_set_pspd_mtmx_strtr_params_v5 { |
| 473 | struct apr_hdr hdr; |
| 474 | /* LSW of parameter data payload address.*/ |
| 475 | u32 payload_addr_lsw; |
| 476 | /* MSW of parameter data payload address.*/ |
| 477 | u32 payload_addr_msw; |
| 478 | /* Memory map handle returned by ADM_CMD_SHARED_MEM_MAP_REGIONS */ |
| 479 | /* command. If mem_map_handle is zero implies the message is in */ |
| 480 | /* the payload */ |
| 481 | u32 mem_map_handle; |
| 482 | /* Size in bytes of the variable payload accompanying this */ |
| 483 | /* message or in shared memory. This is used for parsing the */ |
| 484 | /* parameter payload. */ |
| 485 | u32 payload_size; |
| 486 | u16 direction; |
| 487 | u16 sessionid; |
| 488 | u16 deviceid; |
| 489 | u16 reserved; |
| 490 | } __packed; |
| 491 | |
| 492 | /* Defined specifically for in-band use, includes params */ |
| 493 | struct adm_cmd_set_pp_params_inband_v5 { |
| 494 | struct apr_hdr hdr; |
| 495 | /* LSW of parameter data payload address.*/ |
| 496 | u32 payload_addr_lsw; |
| 497 | /* MSW of parameter data payload address.*/ |
| 498 | u32 payload_addr_msw; |
| 499 | /* Memory map handle returned by ADM_CMD_SHARED_MEM_MAP_REGIONS */ |
| 500 | /* command. If mem_map_handle is zero implies the message is in */ |
| 501 | /* the payload */ |
| 502 | u32 mem_map_handle; |
| 503 | /* Size in bytes of the variable payload accompanying this */ |
| 504 | /* message or in shared memory. This is used for parsing the */ |
| 505 | /* parameter payload. */ |
| 506 | u32 payload_size; |
| 507 | /* Parameters passed for in band payload */ |
| 508 | struct adm_param_data_v5 params; |
| 509 | } __packed; |
| 510 | |
| 511 | /* Returns the status and COPP ID to an #ADM_CMD_DEVICE_OPEN_V5 command. |
| 512 | */ |
| 513 | #define ADM_CMDRSP_DEVICE_OPEN_V5 0x00010329 |
| 514 | |
| 515 | /* Payload of the #ADM_CMDRSP_DEVICE_OPEN_V5 message, |
| 516 | * which returns the |
| 517 | * status and COPP ID to an #ADM_CMD_DEVICE_OPEN_V5 command. |
| 518 | */ |
| 519 | struct adm_cmd_rsp_device_open_v5 { |
| 520 | u32 status; |
| 521 | /* Status message (error code).*/ |
| 522 | |
| 523 | u16 copp_id; |
| 524 | /* COPP ID: Supported values: 0 <= copp_id < ADM_MAX_COPPS*/ |
| 525 | |
| 526 | u16 reserved; |
| 527 | /* Reserved. This field must be set to zero.*/ |
| 528 | } __packed; |
| 529 | |
| 530 | /* Returns the status and COPP ID to an #ADM_CMD_DEVICE_OPEN_V6 command. */ |
| 531 | #define ADM_CMDRSP_DEVICE_OPEN_V6 0x00010357 |
| 532 | |
| 533 | /* Payload of the #ADM_CMDRSP_DEVICE_OPEN_V6 message, |
| 534 | * which returns the |
| 535 | * status and COPP ID to an #ADM_CMD_DEVICE_OPEN_V6 command |
| 536 | * is the exact same as ADM_CMDRSP_DEVICE_OPEN_V5. |
| 537 | */ |
| 538 | |
| 539 | /* This command allows a query of one COPP parameter. */ |
| 540 | #define ADM_CMD_GET_PP_PARAMS_V5 0x0001032A |
| 541 | |
| 542 | /* Payload an #ADM_CMD_GET_PP_PARAMS_V5 command. */ |
| 543 | struct adm_cmd_get_pp_params_v5 { |
| 544 | struct apr_hdr hdr; |
| 545 | u32 data_payload_addr_lsw; |
| 546 | /* LSW of parameter data payload address.*/ |
| 547 | |
| 548 | u32 data_payload_addr_msw; |
| 549 | /* MSW of parameter data payload address.*/ |
| 550 | |
| 551 | /* If the mem_map_handle is non zero, |
| 552 | * on ACK, the ParamData payloads begin at |
| 553 | * the address specified (out-of-band). |
| 554 | */ |
| 555 | |
| 556 | u32 mem_map_handle; |
| 557 | /* Memory map handle returned |
| 558 | * by ADM_CMD_SHARED_MEM_MAP_REGIONS command. |
| 559 | * If the mem_map_handle is 0, it implies that |
| 560 | * the ACK's payload will contain the ParamData (in-band). |
| 561 | */ |
| 562 | |
| 563 | u32 module_id; |
| 564 | /* Unique ID of the module. */ |
| 565 | |
| 566 | u32 param_id; |
| 567 | /* Unique ID of the parameter. */ |
| 568 | |
| 569 | u16 param_max_size; |
| 570 | /* Maximum data size of the parameter |
| 571 | *ID/module ID combination. This |
| 572 | * field is a multiple of 4 bytes. |
| 573 | */ |
| 574 | u16 reserved; |
| 575 | /* Reserved for future enhancements. |
| 576 | * This field must be set to zero. |
| 577 | */ |
| 578 | } __packed; |
| 579 | |
| 580 | /* Returns parameter values |
| 581 | * in response to an #ADM_CMD_GET_PP_PARAMS_V5 command. |
| 582 | */ |
| 583 | #define ADM_CMDRSP_GET_PP_PARAMS_V5 0x0001032B |
| 584 | |
| 585 | /* Payload of the #ADM_CMDRSP_GET_PP_PARAMS_V5 message, |
| 586 | * which returns parameter values in response |
| 587 | * to an #ADM_CMD_GET_PP_PARAMS_V5 command. |
| 588 | * Immediately following this |
| 589 | * structure is the adm_param_data_v5 |
| 590 | * structure containing the pre/postprocessing |
| 591 | * parameter data. For an in-band |
| 592 | * scenario, the variable payload depends |
| 593 | * on the size of the parameter. |
| 594 | */ |
| 595 | struct adm_cmd_rsp_get_pp_params_v5 { |
| 596 | u32 status; |
| 597 | /* Status message (error code).*/ |
| 598 | } __packed; |
| 599 | |
| 600 | /* Structure for holding soft stepping volume parameters. */ |
| 601 | |
| 602 | /* |
| 603 | * Payload of the #ASM_PARAM_ID_SOFT_VOL_STEPPING_PARAMETERS |
| 604 | * parameters used by the Volume Control module. |
| 605 | */ |
| 606 | |
| 607 | struct audproc_softvolume_params { |
| 608 | u32 period; |
| 609 | u32 step; |
| 610 | u32 rampingcurve; |
| 611 | } __packed; |
| 612 | |
| 613 | /* |
| 614 | * ID of the Media Format Converter (MFC) module. |
| 615 | * This module supports the following parameter IDs: |
| 616 | * #AUDPROC_PARAM_ID_MFC_OUTPUT_MEDIA_FORMAT |
| 617 | * #AUDPROC_CHMIXER_PARAM_ID_COEFF |
| 618 | */ |
| 619 | #define AUDPROC_MODULE_ID_MFC 0x00010912 |
| 620 | |
| 621 | /* ID of the Output Media Format parameters used by AUDPROC_MODULE_ID_MFC. |
| 622 | * |
| 623 | */ |
| 624 | #define AUDPROC_PARAM_ID_MFC_OUTPUT_MEDIA_FORMAT 0x00010913 |
| 625 | |
| 626 | |
| 627 | struct audproc_mfc_output_media_fmt { |
| 628 | struct adm_cmd_set_pp_params_v5 params; |
| 629 | struct adm_param_data_v5 data; |
| 630 | uint32_t sampling_rate; |
| 631 | uint16_t bits_per_sample; |
| 632 | uint16_t num_channels; |
| 633 | uint16_t channel_type[8]; |
| 634 | } __packed; |
| 635 | |
| 636 | struct audproc_volume_ctrl_master_gain { |
| 637 | struct adm_cmd_set_pp_params_v5 params; |
| 638 | struct adm_param_data_v5 data; |
| 639 | /* Linear gain in Q13 format. */ |
| 640 | uint16_t master_gain; |
| 641 | /* Clients must set this field to zero. */ |
| 642 | uint16_t reserved; |
| 643 | } __packed; |
| 644 | |
| 645 | struct audproc_soft_step_volume_params { |
| 646 | struct adm_cmd_set_pp_params_v5 params; |
| 647 | struct adm_param_data_v5 data; |
| 648 | /* |
| 649 | * Period in milliseconds. |
| 650 | * Supported values: 0 to 15000 |
| 651 | */ |
| 652 | uint32_t period; |
| 653 | /* |
| 654 | * Step in microseconds. |
| 655 | * Supported values: 0 to 15000000 |
| 656 | */ |
| 657 | uint32_t step; |
| 658 | /* |
| 659 | * Ramping curve type. |
| 660 | * Supported values: |
| 661 | * - #AUDPROC_PARAM_SVC_RAMPINGCURVE_LINEAR |
| 662 | * - #AUDPROC_PARAM_SVC_RAMPINGCURVE_EXP |
| 663 | * - #AUDPROC_PARAM_SVC_RAMPINGCURVE_LOG |
| 664 | */ |
| 665 | uint32_t ramping_curve; |
| 666 | } __packed; |
| 667 | |
| 668 | struct audproc_enable_param_t { |
| 669 | struct adm_cmd_set_pp_params_inband_v5 pp_params; |
| 670 | /* |
| 671 | * Specifies whether the Audio processing module is enabled. |
| 672 | * This parameter is generic/common parameter to configure or |
| 673 | * determine the state of any audio processing module. |
| 674 | |
| 675 | * @values 0 : Disable 1: Enable |
| 676 | */ |
| 677 | uint32_t enable; |
| 678 | }; |
| 679 | |
| 680 | /* |
| 681 | * Allows a client to control the gains on various session-to-COPP paths. |
| 682 | */ |
| 683 | #define ADM_CMD_MATRIX_RAMP_GAINS_V5 0x0001032C |
| 684 | |
| 685 | /* Indicates that the target gain in the |
| 686 | * current adm_session_copp_gain_v5 |
| 687 | * structure is to be applied to all |
| 688 | * the session-to-COPP paths that exist for |
| 689 | * the specified session. |
| 690 | */ |
| 691 | #define ADM_CMD_MATRIX_RAMP_GAINS_COPP_ID_ALL_CONNECTED_COPPS 0xFFFF |
| 692 | |
| 693 | /* Indicates that the target gain is |
| 694 | * to be immediately applied to the |
| 695 | * specified session-to-COPP path, |
| 696 | * without a ramping fashion. |
| 697 | */ |
| 698 | #define ADM_CMD_MATRIX_RAMP_GAINS_RAMP_DURATION_IMMEDIATE 0x0000 |
| 699 | |
| 700 | /* Enumeration for a linear ramping curve.*/ |
| 701 | #define ADM_CMD_MATRIX_RAMP_GAINS_RAMP_CURVE_LINEAR 0x0000 |
| 702 | |
| 703 | /* Payload of the #ADM_CMD_MATRIX_RAMP_GAINS_V5 command. |
| 704 | * Immediately following this structure are num_gains of the |
| 705 | * adm_session_copp_gain_v5structure. |
| 706 | */ |
| 707 | struct adm_cmd_matrix_ramp_gains_v5 { |
| 708 | u32 matrix_id; |
| 709 | /* Specifies whether the matrix ID is Audio Rx (0) or Audio Tx (1). |
| 710 | * Use the ADM_MATRIX_ID_AUDIO_RX or ADM_MATRIX_ID_AUDIOX |
| 711 | * macros to set this field. |
| 712 | */ |
| 713 | |
| 714 | u16 num_gains; |
| 715 | /* Number of gains being applied. */ |
| 716 | |
| 717 | u16 reserved_for_align; |
| 718 | /* Reserved. This field must be set to zero.*/ |
| 719 | } __packed; |
| 720 | |
| 721 | /* Session-to-COPP path gain structure, used by the |
| 722 | * #ADM_CMD_MATRIX_RAMP_GAINS_V5 command. |
| 723 | * This structure specifies the target |
| 724 | * gain (per channel) that must be applied |
| 725 | * to a particular session-to-COPP path in |
| 726 | * the audio matrix. The structure can |
| 727 | * also be used to apply the gain globally |
| 728 | * to all session-to-COPP paths that |
| 729 | * exist for the given session. |
| 730 | * The aDSP uses device channel mapping to |
| 731 | * determine which channel gains to |
| 732 | * use from this command. For example, |
| 733 | * if the device is configured as stereo, |
| 734 | * the aDSP uses only target_gain_ch_1 and |
| 735 | * target_gain_ch_2, and it ignores |
| 736 | * the others. |
| 737 | */ |
| 738 | struct adm_session_copp_gain_v5 { |
| 739 | u16 session_id; |
| 740 | /* Handle of the ASM session. |
| 741 | * Supported values: 1 to 8. |
| 742 | */ |
| 743 | |
| 744 | u16 copp_id; |
| 745 | /* Handle of the COPP. Gain will be applied on the Session ID |
| 746 | * COPP ID path. |
| 747 | */ |
| 748 | |
| 749 | u16 ramp_duration; |
| 750 | /* Duration (in milliseconds) of the ramp over |
| 751 | * which target gains are |
| 752 | * to be applied. Use |
| 753 | * #ADM_CMD_MATRIX_RAMP_GAINS_RAMP_DURATION_IMMEDIATE |
| 754 | * to indicate that gain must be applied immediately. |
| 755 | */ |
| 756 | |
| 757 | u16 step_duration; |
| 758 | /* Duration (in milliseconds) of each step in the ramp. |
| 759 | * This parameter is ignored if ramp_duration is equal to |
| 760 | * #ADM_CMD_MATRIX_RAMP_GAINS_RAMP_DURATION_IMMEDIATE. |
| 761 | * Supported value: 1 |
| 762 | */ |
| 763 | |
| 764 | u16 ramp_curve; |
| 765 | /* Type of ramping curve. |
| 766 | * Supported value: #ADM_CMD_MATRIX_RAMP_GAINS_RAMP_CURVE_LINEAR |
| 767 | */ |
| 768 | |
| 769 | u16 reserved_for_align; |
| 770 | /* Reserved. This field must be set to zero. */ |
| 771 | |
| 772 | u16 target_gain_ch_1; |
| 773 | /* Target linear gain for channel 1 in Q13 format; */ |
| 774 | |
| 775 | u16 target_gain_ch_2; |
| 776 | /* Target linear gain for channel 2 in Q13 format; */ |
| 777 | |
| 778 | u16 target_gain_ch_3; |
| 779 | /* Target linear gain for channel 3 in Q13 format; */ |
| 780 | |
| 781 | u16 target_gain_ch_4; |
| 782 | /* Target linear gain for channel 4 in Q13 format; */ |
| 783 | |
| 784 | u16 target_gain_ch_5; |
| 785 | /* Target linear gain for channel 5 in Q13 format; */ |
| 786 | |
| 787 | u16 target_gain_ch_6; |
| 788 | /* Target linear gain for channel 6 in Q13 format; */ |
| 789 | |
| 790 | u16 target_gain_ch_7; |
| 791 | /* Target linear gain for channel 7 in Q13 format; */ |
| 792 | |
| 793 | u16 target_gain_ch_8; |
| 794 | /* Target linear gain for channel 8 in Q13 format; */ |
| 795 | } __packed; |
| 796 | |
| 797 | /* Allows to set mute/unmute on various session-to-COPP paths. |
| 798 | * For every session-to-COPP path (stream-device interconnection), |
| 799 | * mute/unmute can be set individually on the output channels. |
| 800 | */ |
| 801 | #define ADM_CMD_MATRIX_MUTE_V5 0x0001032D |
| 802 | |
| 803 | /* Indicates that mute/unmute in the |
| 804 | * current adm_session_copp_mute_v5structure |
| 805 | * is to be applied to all the session-to-COPP |
| 806 | * paths that exist for the specified session. |
| 807 | */ |
| 808 | #define ADM_CMD_MATRIX_MUTE_COPP_ID_ALL_CONNECTED_COPPS 0xFFFF |
| 809 | |
| 810 | /* Payload of the #ADM_CMD_MATRIX_MUTE_V5 command*/ |
| 811 | struct adm_cmd_matrix_mute_v5 { |
| 812 | u32 matrix_id; |
| 813 | /* Specifies whether the matrix ID is Audio Rx (0) or Audio Tx (1). |
| 814 | * Use the ADM_MATRIX_ID_AUDIO_RX or ADM_MATRIX_ID_AUDIOX |
| 815 | * macros to set this field. |
| 816 | */ |
| 817 | |
| 818 | u16 session_id; |
| 819 | /* Handle of the ASM session. |
| 820 | * Supported values: 1 to 8. |
| 821 | */ |
| 822 | |
| 823 | u16 copp_id; |
| 824 | /* Handle of the COPP. |
| 825 | * Use ADM_CMD_MATRIX_MUTE_COPP_ID_ALL_CONNECTED_COPPS |
| 826 | * to indicate that mute/unmute must be applied to |
| 827 | * all the COPPs connected to session_id. |
| 828 | * Supported values: |
| 829 | * - 0xFFFF -- Apply mute/unmute to all connected COPPs |
| 830 | * - Other values -- Valid COPP ID |
| 831 | */ |
| 832 | |
| 833 | u8 mute_flag_ch_1; |
| 834 | /* Mute flag for channel 1 is set to unmute (0) or mute (1). */ |
| 835 | |
| 836 | u8 mute_flag_ch_2; |
| 837 | /* Mute flag for channel 2 is set to unmute (0) or mute (1). */ |
| 838 | |
| 839 | u8 mute_flag_ch_3; |
| 840 | /* Mute flag for channel 3 is set to unmute (0) or mute (1). */ |
| 841 | |
| 842 | u8 mute_flag_ch_4; |
| 843 | /* Mute flag for channel 4 is set to unmute (0) or mute (1). */ |
| 844 | |
| 845 | u8 mute_flag_ch_5; |
| 846 | /* Mute flag for channel 5 is set to unmute (0) or mute (1). */ |
| 847 | |
| 848 | u8 mute_flag_ch_6; |
| 849 | /* Mute flag for channel 6 is set to unmute (0) or mute (1). */ |
| 850 | |
| 851 | u8 mute_flag_ch_7; |
| 852 | /* Mute flag for channel 7 is set to unmute (0) or mute (1). */ |
| 853 | |
| 854 | u8 mute_flag_ch_8; |
| 855 | /* Mute flag for channel 8 is set to unmute (0) or mute (1). */ |
| 856 | |
| 857 | u16 ramp_duration; |
| 858 | /* Period (in milliseconds) over which the soft mute/unmute will be |
| 859 | * applied. |
| 860 | * Supported values: 0 (Default) to 0xFFFF |
| 861 | * The default of 0 means mute/unmute will be applied immediately. |
| 862 | */ |
| 863 | |
| 864 | u16 reserved_for_align; |
| 865 | /* Clients must set this field to zero.*/ |
| 866 | } __packed; |
| 867 | |
| 868 | #define ASM_PARAM_ID_AAC_STEREO_MIX_COEFF_SELECTION_FLAG_V2 (0x00010DD8) |
| 869 | |
| 870 | struct asm_aac_stereo_mix_coeff_selection_param_v2 { |
| 871 | struct apr_hdr hdr; |
| 872 | u32 param_id; |
| 873 | u32 param_size; |
| 874 | u32 aac_stereo_mix_coeff_flag; |
| 875 | } __packed; |
| 876 | |
| 877 | /* Allows a client to connect the desired stream to |
| 878 | * the desired AFE port through the stream router |
| 879 | * |
| 880 | * This command allows the client to connect specified session to |
| 881 | * specified AFE port. This is used for compressed streams only |
| 882 | * opened using the #ASM_STREAM_CMD_OPEN_WRITE_COMPRESSED or |
| 883 | * #ASM_STREAM_CMD_OPEN_READ_COMPRESSED command. |
| 884 | * |
| 885 | * @prerequisites |
| 886 | * Session ID and AFE Port ID must be valid. |
| 887 | * #ASM_STREAM_CMD_OPEN_WRITE_COMPRESSED or |
| 888 | * #ASM_STREAM_CMD_OPEN_READ_COMPRESSED |
| 889 | * must have been called on this session. |
| 890 | */ |
| 891 | |
| 892 | #define ADM_CMD_CONNECT_AFE_PORT_V5 0x0001032E |
| 893 | #define ADM_CMD_DISCONNECT_AFE_PORT_V5 0x0001032F |
| 894 | /* Enumeration for the Rx stream router ID.*/ |
| 895 | #define ADM_STRTR_ID_RX 0 |
| 896 | /* Enumeration for the Tx stream router ID.*/ |
| 897 | #define ADM_STRTR_IDX 1 |
| 898 | |
| 899 | /* Payload of the #ADM_CMD_CONNECT_AFE_PORT_V5 command.*/ |
| 900 | struct adm_cmd_connect_afe_port_v5 { |
| 901 | struct apr_hdr hdr; |
| 902 | u8 mode; |
| 903 | /* ID of the stream router (RX/TX). Use the |
| 904 | * ADM_STRTR_ID_RX or ADM_STRTR_IDX macros |
| 905 | * to set this field. |
| 906 | */ |
| 907 | |
| 908 | u8 session_id; |
| 909 | /* Session ID of the stream to connect */ |
| 910 | |
| 911 | u16 afe_port_id; |
| 912 | /* Port ID of the AFE port to connect to.*/ |
| 913 | u32 num_channels; |
| 914 | /* Number of device channels |
| 915 | * Supported values: 2(Audio Sample Packet), |
| 916 | * 8 (HBR Audio Stream Sample Packet) |
| 917 | */ |
| 918 | |
| 919 | u32 sampling_rate; |
| 920 | /* Device sampling rate |
| 921 | * Supported values: Any |
| 922 | */ |
| 923 | } __packed; |
| 924 | |
| 925 | |
| 926 | /* adsp_adm_api.h */ |
| 927 | |
| 928 | |
| 929 | /* Port ID. Update afe_get_port_index |
| 930 | * when a new port is added here. |
| 931 | */ |
| 932 | #define PRIMARY_I2S_RX 0 |
| 933 | #define PRIMARY_I2S_TX 1 |
| 934 | #define SECONDARY_I2S_RX 4 |
| 935 | #define SECONDARY_I2S_TX 5 |
| 936 | #define MI2S_RX 6 |
| 937 | #define MI2S_TX 7 |
| 938 | #define HDMI_RX 8 |
| 939 | #define RSVD_2 9 |
| 940 | #define RSVD_3 10 |
| 941 | #define DIGI_MIC_TX 11 |
| 942 | #define VOICE2_PLAYBACK_TX 0x8002 |
| 943 | #define VOICE_RECORD_RX 0x8003 |
| 944 | #define VOICE_RECORD_TX 0x8004 |
| 945 | #define VOICE_PLAYBACK_TX 0x8005 |
| 946 | |
| 947 | /* Slimbus Multi channel port id pool */ |
| 948 | #define SLIMBUS_0_RX 0x4000 |
| 949 | #define SLIMBUS_0_TX 0x4001 |
| 950 | #define SLIMBUS_1_RX 0x4002 |
| 951 | #define SLIMBUS_1_TX 0x4003 |
| 952 | #define SLIMBUS_2_RX 0x4004 |
| 953 | #define SLIMBUS_2_TX 0x4005 |
| 954 | #define SLIMBUS_3_RX 0x4006 |
| 955 | #define SLIMBUS_3_TX 0x4007 |
| 956 | #define SLIMBUS_4_RX 0x4008 |
| 957 | #define SLIMBUS_4_TX 0x4009 |
| 958 | #define SLIMBUS_5_RX 0x400a |
| 959 | #define SLIMBUS_5_TX 0x400b |
| 960 | #define SLIMBUS_6_RX 0x400c |
| 961 | #define SLIMBUS_6_TX 0x400d |
| 962 | #define SLIMBUS_7_RX 0x400e |
| 963 | #define SLIMBUS_7_TX 0x400f |
| 964 | #define SLIMBUS_8_RX 0x4010 |
| 965 | #define SLIMBUS_8_TX 0x4011 |
| 966 | #define SLIMBUS_PORT_LAST SLIMBUS_8_TX |
| 967 | #define INT_BT_SCO_RX 0x3000 |
| 968 | #define INT_BT_SCO_TX 0x3001 |
| 969 | #define INT_BT_A2DP_RX 0x3002 |
| 970 | #define INT_FM_RX 0x3004 |
| 971 | #define INT_FM_TX 0x3005 |
| 972 | #define RT_PROXY_PORT_001_RX 0x2000 |
| 973 | #define RT_PROXY_PORT_001_TX 0x2001 |
| 974 | #define DISPLAY_PORT_RX 0x6020 |
| 975 | |
| 976 | #define AFE_PORT_INVALID 0xFFFF |
| 977 | #define SLIMBUS_INVALID AFE_PORT_INVALID |
| 978 | |
| 979 | #define AFE_PORT_CMD_START 0x000100ca |
| 980 | |
| 981 | #define AFE_EVENT_RTPORT_START 0 |
| 982 | #define AFE_EVENT_RTPORT_STOP 1 |
| 983 | #define AFE_EVENT_RTPORT_LOW_WM 2 |
| 984 | #define AFE_EVENT_RTPORT_HI_WM 3 |
| 985 | |
| 986 | #define ADSP_AFE_VERSION 0x00200000 |
| 987 | |
| 988 | /* Size of the range of port IDs for the audio interface. */ |
| 989 | #define AFE_PORT_ID_AUDIO_IF_PORT_RANGE_SIZE 0xF |
| 990 | |
| 991 | /* Size of the range of port IDs for internal BT-FM ports. */ |
| 992 | #define AFE_PORT_ID_INTERNAL_BT_FM_RANGE_SIZE 0x6 |
| 993 | |
| 994 | /* Size of the range of port IDs for SLIMbus<sup>® |
| 995 | * </sup> multichannel |
| 996 | * ports. |
| 997 | */ |
| 998 | #define AFE_PORT_ID_SLIMBUS_RANGE_SIZE 0xA |
| 999 | |
| 1000 | /* Size of the range of port IDs for real-time proxy ports. */ |
| 1001 | #define AFE_PORT_ID_RT_PROXY_PORT_RANGE_SIZE 0x2 |
| 1002 | |
| 1003 | /* Size of the range of port IDs for pseudoports. */ |
| 1004 | #define AFE_PORT_ID_PSEUDOPORT_RANGE_SIZE 0x5 |
| 1005 | |
| 1006 | /* Start of the range of port IDs for the audio interface. */ |
| 1007 | #define AFE_PORT_ID_AUDIO_IF_PORT_RANGE_START 0x1000 |
| 1008 | |
| 1009 | /* End of the range of port IDs for the audio interface. */ |
| 1010 | #define AFE_PORT_ID_AUDIO_IF_PORT_RANGE_END \ |
| 1011 | (AFE_PORT_ID_AUDIO_IF_PORT_RANGE_START +\ |
| 1012 | AFE_PORT_ID_AUDIO_IF_PORT_RANGE_SIZE - 1) |
| 1013 | |
| 1014 | /* Start of the range of port IDs for real-time proxy ports. */ |
| 1015 | #define AFE_PORT_ID_RT_PROXY_PORT_RANGE_START 0x2000 |
| 1016 | |
| 1017 | /* End of the range of port IDs for real-time proxy ports. */ |
| 1018 | #define AFE_PORT_ID_RT_PROXY_PORT_RANGE_END \ |
| 1019 | (AFE_PORT_ID_RT_PROXY_PORT_RANGE_START +\ |
| 1020 | AFE_PORT_ID_RT_PROXY_PORT_RANGE_SIZE-1) |
| 1021 | |
| 1022 | /* Start of the range of port IDs for internal BT-FM devices. */ |
| 1023 | #define AFE_PORT_ID_INTERNAL_BT_FM_RANGE_START 0x3000 |
| 1024 | |
| 1025 | /* End of the range of port IDs for internal BT-FM devices. */ |
| 1026 | #define AFE_PORT_ID_INTERNAL_BT_FM_RANGE_END \ |
| 1027 | (AFE_PORT_ID_INTERNAL_BT_FM_RANGE_START +\ |
| 1028 | AFE_PORT_ID_INTERNAL_BT_FM_RANGE_SIZE-1) |
| 1029 | |
| 1030 | /* Start of the range of port IDs for SLIMbus devices. */ |
| 1031 | #define AFE_PORT_ID_SLIMBUS_RANGE_START 0x4000 |
| 1032 | |
| 1033 | /* End of the range of port IDs for SLIMbus devices. */ |
| 1034 | #define AFE_PORT_ID_SLIMBUS_RANGE_END \ |
| 1035 | (AFE_PORT_ID_SLIMBUS_RANGE_START +\ |
| 1036 | AFE_PORT_ID_SLIMBUS_RANGE_SIZE-1) |
| 1037 | |
| 1038 | /* Start of the range of port IDs for pseudoports. */ |
| 1039 | #define AFE_PORT_ID_PSEUDOPORT_RANGE_START 0x8001 |
| 1040 | |
| 1041 | /* End of the range of port IDs for pseudoports. */ |
| 1042 | #define AFE_PORT_ID_PSEUDOPORT_RANGE_END \ |
| 1043 | (AFE_PORT_ID_PSEUDOPORT_RANGE_START +\ |
| 1044 | AFE_PORT_ID_PSEUDOPORT_RANGE_SIZE-1) |
| 1045 | |
| 1046 | /* Start of the range of port IDs for TDM devices. */ |
| 1047 | #define AFE_PORT_ID_TDM_PORT_RANGE_START 0x9000 |
| 1048 | |
| 1049 | /* End of the range of port IDs for TDM devices. */ |
| 1050 | #define AFE_PORT_ID_TDM_PORT_RANGE_END \ |
| 1051 | (AFE_PORT_ID_TDM_PORT_RANGE_START+0x40-1) |
| 1052 | |
| 1053 | /* Size of the range of port IDs for TDM ports. */ |
| 1054 | #define AFE_PORT_ID_TDM_PORT_RANGE_SIZE \ |
| 1055 | (AFE_PORT_ID_TDM_PORT_RANGE_END - \ |
| 1056 | AFE_PORT_ID_TDM_PORT_RANGE_START+1) |
| 1057 | |
| 1058 | #define AFE_PORT_ID_PRIMARY_MI2S_RX 0x1000 |
| 1059 | #define AFE_PORT_ID_PRIMARY_MI2S_TX 0x1001 |
| 1060 | #define AFE_PORT_ID_SECONDARY_MI2S_RX 0x1002 |
| 1061 | #define AFE_PORT_ID_SECONDARY_MI2S_TX 0x1003 |
| 1062 | #define AFE_PORT_ID_TERTIARY_MI2S_RX 0x1004 |
| 1063 | #define AFE_PORT_ID_TERTIARY_MI2S_TX 0x1005 |
| 1064 | #define AFE_PORT_ID_QUATERNARY_MI2S_RX 0x1006 |
| 1065 | #define AFE_PORT_ID_QUATERNARY_MI2S_TX 0x1007 |
| 1066 | #define AUDIO_PORT_ID_I2S_RX 0x1008 |
| 1067 | #define AFE_PORT_ID_DIGITAL_MIC_TX 0x1009 |
| 1068 | #define AFE_PORT_ID_PRIMARY_PCM_RX 0x100A |
| 1069 | #define AFE_PORT_ID_PRIMARY_PCM_TX 0x100B |
| 1070 | #define AFE_PORT_ID_SECONDARY_PCM_RX 0x100C |
| 1071 | #define AFE_PORT_ID_SECONDARY_PCM_TX 0x100D |
| 1072 | #define AFE_PORT_ID_MULTICHAN_HDMI_RX 0x100E |
| 1073 | #define AFE_PORT_ID_SECONDARY_MI2S_RX_SD1 0x1010 |
| 1074 | #define AFE_PORT_ID_TERTIARY_PCM_RX 0x1012 |
| 1075 | #define AFE_PORT_ID_TERTIARY_PCM_TX 0x1013 |
| 1076 | #define AFE_PORT_ID_QUATERNARY_PCM_RX 0x1014 |
| 1077 | #define AFE_PORT_ID_QUATERNARY_PCM_TX 0x1015 |
| 1078 | #define AFE_PORT_ID_QUINARY_MI2S_RX 0x1016 |
| 1079 | #define AFE_PORT_ID_QUINARY_MI2S_TX 0x1017 |
| 1080 | /* ID of the senary MI2S Rx port. */ |
| 1081 | #define AFE_PORT_ID_SENARY_MI2S_RX 0x1018 |
| 1082 | /* ID of the senary MI2S Tx port. */ |
| 1083 | #define AFE_PORT_ID_SENARY_MI2S_TX 0x1019 |
| 1084 | /* ID of the Internal 0 MI2S Rx port */ |
| 1085 | #define AFE_PORT_ID_INT0_MI2S_RX 0x102E |
| 1086 | /* ID of the Internal 0 MI2S Tx port */ |
| 1087 | #define AFE_PORT_ID_INT0_MI2S_TX 0x102F |
| 1088 | /* ID of the Internal 1 MI2S Rx port */ |
| 1089 | #define AFE_PORT_ID_INT1_MI2S_RX 0x1030 |
| 1090 | /* ID of the Internal 1 MI2S Tx port */ |
| 1091 | #define AFE_PORT_ID_INT1_MI2S_TX 0x1031 |
| 1092 | /* ID of the Internal 2 MI2S Rx port */ |
| 1093 | #define AFE_PORT_ID_INT2_MI2S_RX 0x1032 |
| 1094 | /* ID of the Internal 2 MI2S Tx port */ |
| 1095 | #define AFE_PORT_ID_INT2_MI2S_TX 0x1033 |
| 1096 | /* ID of the Internal 3 MI2S Rx port */ |
| 1097 | #define AFE_PORT_ID_INT3_MI2S_RX 0x1034 |
| 1098 | /* ID of the Internal 3 MI2S Tx port */ |
| 1099 | #define AFE_PORT_ID_INT3_MI2S_TX 0x1035 |
| 1100 | /* ID of the Internal 4 MI2S Rx port */ |
| 1101 | #define AFE_PORT_ID_INT4_MI2S_RX 0x1036 |
| 1102 | /* ID of the Internal 4 MI2S Tx port */ |
| 1103 | #define AFE_PORT_ID_INT4_MI2S_TX 0x1037 |
| 1104 | /* ID of the Internal 5 MI2S Rx port */ |
| 1105 | #define AFE_PORT_ID_INT5_MI2S_RX 0x1038 |
| 1106 | /* ID of the Internal 5 MI2S Tx port */ |
| 1107 | #define AFE_PORT_ID_INT5_MI2S_TX 0x1039 |
| 1108 | /* ID of the Internal 6 MI2S Rx port */ |
| 1109 | #define AFE_PORT_ID_INT6_MI2S_RX 0x103A |
| 1110 | /* ID of the Internal 6 MI2S Tx port */ |
| 1111 | #define AFE_PORT_ID_INT6_MI2S_TX 0x103B |
| 1112 | #define AFE_PORT_ID_SPDIF_RX 0x5000 |
| 1113 | #define AFE_PORT_ID_RT_PROXY_PORT_001_RX 0x2000 |
| 1114 | #define AFE_PORT_ID_RT_PROXY_PORT_001_TX 0x2001 |
| 1115 | #define AFE_PORT_ID_INTERNAL_BT_SCO_RX 0x3000 |
| 1116 | #define AFE_PORT_ID_INTERNAL_BT_SCO_TX 0x3001 |
| 1117 | #define AFE_PORT_ID_INTERNAL_BT_A2DP_RX 0x3002 |
| 1118 | #define AFE_PORT_ID_INTERNAL_FM_RX 0x3004 |
| 1119 | #define AFE_PORT_ID_INTERNAL_FM_TX 0x3005 |
| 1120 | /* SLIMbus Rx port on channel 0. */ |
| 1121 | #define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_RX 0x4000 |
| 1122 | /* SLIMbus Tx port on channel 0. */ |
| 1123 | #define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_TX 0x4001 |
| 1124 | /* SLIMbus Rx port on channel 1. */ |
| 1125 | #define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_RX 0x4002 |
| 1126 | /* SLIMbus Tx port on channel 1. */ |
| 1127 | #define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_TX 0x4003 |
| 1128 | /* SLIMbus Rx port on channel 2. */ |
| 1129 | #define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_RX 0x4004 |
| 1130 | /* SLIMbus Tx port on channel 2. */ |
| 1131 | #define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_TX 0x4005 |
| 1132 | /* SLIMbus Rx port on channel 3. */ |
| 1133 | #define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_3_RX 0x4006 |
| 1134 | /* SLIMbus Tx port on channel 3. */ |
| 1135 | #define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_3_TX 0x4007 |
| 1136 | /* SLIMbus Rx port on channel 4. */ |
| 1137 | #define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_4_RX 0x4008 |
| 1138 | /* SLIMbus Tx port on channel 4. */ |
| 1139 | #define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_4_TX 0x4009 |
| 1140 | /* SLIMbus Rx port on channel 5. */ |
| 1141 | #define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_RX 0x400a |
| 1142 | /* SLIMbus Tx port on channel 5. */ |
| 1143 | #define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_TX 0x400b |
| 1144 | /* SLIMbus Rx port on channel 6. */ |
| 1145 | #define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_RX 0x400c |
| 1146 | /* SLIMbus Tx port on channel 6. */ |
| 1147 | #define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_TX 0x400d |
| 1148 | /* SLIMbus Rx port on channel 7. */ |
| 1149 | #define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_7_RX 0x400e |
| 1150 | /* SLIMbus Tx port on channel 7. */ |
| 1151 | #define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_7_TX 0x400f |
| 1152 | /* SLIMbus Rx port on channel 8. */ |
| 1153 | #define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_8_RX 0x4010 |
| 1154 | /* SLIMbus Tx port on channel 8. */ |
| 1155 | #define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_8_TX 0x4011 |
| 1156 | /* AFE Rx port for audio over Display port */ |
| 1157 | #define AFE_PORT_ID_HDMI_OVER_DP_RX 0x6020 |
| 1158 | /*USB AFE port */ |
| 1159 | #define AFE_PORT_ID_USB_RX 0x7000 |
| 1160 | #define AFE_PORT_ID_USB_TX 0x7001 |
| 1161 | |
| 1162 | /* Generic pseudoport 1. */ |
| 1163 | #define AFE_PORT_ID_PSEUDOPORT_01 0x8001 |
| 1164 | /* Generic pseudoport 2. */ |
| 1165 | #define AFE_PORT_ID_PSEUDOPORT_02 0x8002 |
| 1166 | |
| 1167 | /* @xreflabel{hdr:AfePortIdPrimaryAuxPcmTx} |
| 1168 | * Primary Aux PCM Tx port ID. |
| 1169 | */ |
| 1170 | #define AFE_PORT_ID_PRIMARY_PCM_TX 0x100B |
| 1171 | /* Pseudoport that corresponds to the voice Rx path. |
| 1172 | * For recording, the voice Rx path samples are written to this |
| 1173 | * port and consumed by the audio path. |
| 1174 | */ |
| 1175 | |
| 1176 | #define AFE_PORT_ID_VOICE_RECORD_RX 0x8003 |
| 1177 | |
| 1178 | /* Pseudoport that corresponds to the voice Tx path. |
| 1179 | * For recording, the voice Tx path samples are written to this |
| 1180 | * port and consumed by the audio path. |
| 1181 | */ |
| 1182 | |
| 1183 | #define AFE_PORT_ID_VOICE_RECORD_TX 0x8004 |
| 1184 | /* Pseudoport that corresponds to in-call voice delivery samples. |
| 1185 | * During in-call audio delivery, the audio path delivers samples |
| 1186 | * to this port from where the voice path delivers them on the |
| 1187 | * Rx path. |
| 1188 | */ |
| 1189 | #define AFE_PORT_ID_VOICE2_PLAYBACK_TX 0x8002 |
| 1190 | #define AFE_PORT_ID_VOICE_PLAYBACK_TX 0x8005 |
| 1191 | |
| 1192 | #define AFE_PORT_ID_PRIMARY_TDM_RX \ |
| 1193 | (AFE_PORT_ID_TDM_PORT_RANGE_START + 0x00) |
| 1194 | #define AFE_PORT_ID_PRIMARY_TDM_RX_1 \ |
| 1195 | (AFE_PORT_ID_PRIMARY_TDM_RX + 0x02) |
| 1196 | #define AFE_PORT_ID_PRIMARY_TDM_RX_2 \ |
| 1197 | (AFE_PORT_ID_PRIMARY_TDM_RX + 0x04) |
| 1198 | #define AFE_PORT_ID_PRIMARY_TDM_RX_3 \ |
| 1199 | (AFE_PORT_ID_PRIMARY_TDM_RX + 0x06) |
| 1200 | #define AFE_PORT_ID_PRIMARY_TDM_RX_4 \ |
| 1201 | (AFE_PORT_ID_PRIMARY_TDM_RX + 0x08) |
| 1202 | #define AFE_PORT_ID_PRIMARY_TDM_RX_5 \ |
| 1203 | (AFE_PORT_ID_PRIMARY_TDM_RX + 0x0A) |
| 1204 | #define AFE_PORT_ID_PRIMARY_TDM_RX_6 \ |
| 1205 | (AFE_PORT_ID_PRIMARY_TDM_RX + 0x0C) |
| 1206 | #define AFE_PORT_ID_PRIMARY_TDM_RX_7 \ |
| 1207 | (AFE_PORT_ID_PRIMARY_TDM_RX + 0x0E) |
| 1208 | |
| 1209 | #define AFE_PORT_ID_PRIMARY_TDM_TX \ |
| 1210 | (AFE_PORT_ID_TDM_PORT_RANGE_START + 0x01) |
| 1211 | #define AFE_PORT_ID_PRIMARY_TDM_TX_1 \ |
| 1212 | (AFE_PORT_ID_PRIMARY_TDM_TX + 0x02) |
| 1213 | #define AFE_PORT_ID_PRIMARY_TDM_TX_2 \ |
| 1214 | (AFE_PORT_ID_PRIMARY_TDM_TX + 0x04) |
| 1215 | #define AFE_PORT_ID_PRIMARY_TDM_TX_3 \ |
| 1216 | (AFE_PORT_ID_PRIMARY_TDM_TX + 0x06) |
| 1217 | #define AFE_PORT_ID_PRIMARY_TDM_TX_4 \ |
| 1218 | (AFE_PORT_ID_PRIMARY_TDM_TX + 0x08) |
| 1219 | #define AFE_PORT_ID_PRIMARY_TDM_TX_5 \ |
| 1220 | (AFE_PORT_ID_PRIMARY_TDM_TX + 0x0A) |
| 1221 | #define AFE_PORT_ID_PRIMARY_TDM_TX_6 \ |
| 1222 | (AFE_PORT_ID_PRIMARY_TDM_TX + 0x0C) |
| 1223 | #define AFE_PORT_ID_PRIMARY_TDM_TX_7 \ |
| 1224 | (AFE_PORT_ID_PRIMARY_TDM_TX + 0x0E) |
| 1225 | |
| 1226 | #define AFE_PORT_ID_SECONDARY_TDM_RX \ |
| 1227 | (AFE_PORT_ID_TDM_PORT_RANGE_START + 0x10) |
| 1228 | #define AFE_PORT_ID_SECONDARY_TDM_RX_1 \ |
| 1229 | (AFE_PORT_ID_SECONDARY_TDM_RX + 0x02) |
| 1230 | #define AFE_PORT_ID_SECONDARY_TDM_RX_2 \ |
| 1231 | (AFE_PORT_ID_SECONDARY_TDM_RX + 0x04) |
| 1232 | #define AFE_PORT_ID_SECONDARY_TDM_RX_3 \ |
| 1233 | (AFE_PORT_ID_SECONDARY_TDM_RX + 0x06) |
| 1234 | #define AFE_PORT_ID_SECONDARY_TDM_RX_4 \ |
| 1235 | (AFE_PORT_ID_SECONDARY_TDM_RX + 0x08) |
| 1236 | #define AFE_PORT_ID_SECONDARY_TDM_RX_5 \ |
| 1237 | (AFE_PORT_ID_SECONDARY_TDM_RX + 0x0A) |
| 1238 | #define AFE_PORT_ID_SECONDARY_TDM_RX_6 \ |
| 1239 | (AFE_PORT_ID_SECONDARY_TDM_RX + 0x0C) |
| 1240 | #define AFE_PORT_ID_SECONDARY_TDM_RX_7 \ |
| 1241 | (AFE_PORT_ID_SECONDARY_TDM_RX + 0x0E) |
| 1242 | |
| 1243 | #define AFE_PORT_ID_SECONDARY_TDM_TX \ |
| 1244 | (AFE_PORT_ID_TDM_PORT_RANGE_START + 0x11) |
| 1245 | #define AFE_PORT_ID_SECONDARY_TDM_TX_1 \ |
| 1246 | (AFE_PORT_ID_SECONDARY_TDM_TX + 0x02) |
| 1247 | #define AFE_PORT_ID_SECONDARY_TDM_TX_2 \ |
| 1248 | (AFE_PORT_ID_SECONDARY_TDM_TX + 0x04) |
| 1249 | #define AFE_PORT_ID_SECONDARY_TDM_TX_3 \ |
| 1250 | (AFE_PORT_ID_SECONDARY_TDM_TX + 0x06) |
| 1251 | #define AFE_PORT_ID_SECONDARY_TDM_TX_4 \ |
| 1252 | (AFE_PORT_ID_SECONDARY_TDM_TX + 0x08) |
| 1253 | #define AFE_PORT_ID_SECONDARY_TDM_TX_5 \ |
| 1254 | (AFE_PORT_ID_SECONDARY_TDM_TX + 0x0A) |
| 1255 | #define AFE_PORT_ID_SECONDARY_TDM_TX_6 \ |
| 1256 | (AFE_PORT_ID_SECONDARY_TDM_TX + 0x0C) |
| 1257 | #define AFE_PORT_ID_SECONDARY_TDM_TX_7 \ |
| 1258 | (AFE_PORT_ID_SECONDARY_TDM_TX + 0x0E) |
| 1259 | |
| 1260 | #define AFE_PORT_ID_TERTIARY_TDM_RX \ |
| 1261 | (AFE_PORT_ID_TDM_PORT_RANGE_START + 0x20) |
| 1262 | #define AFE_PORT_ID_TERTIARY_TDM_RX_1 \ |
| 1263 | (AFE_PORT_ID_TERTIARY_TDM_RX + 0x02) |
| 1264 | #define AFE_PORT_ID_TERTIARY_TDM_RX_2 \ |
| 1265 | (AFE_PORT_ID_TERTIARY_TDM_RX + 0x04) |
| 1266 | #define AFE_PORT_ID_TERTIARY_TDM_RX_3 \ |
| 1267 | (AFE_PORT_ID_TERTIARY_TDM_RX + 0x06) |
| 1268 | #define AFE_PORT_ID_TERTIARY_TDM_RX_4 \ |
| 1269 | (AFE_PORT_ID_TERTIARY_TDM_RX + 0x08) |
| 1270 | #define AFE_PORT_ID_TERTIARY_TDM_RX_5 \ |
| 1271 | (AFE_PORT_ID_TERTIARY_TDM_RX + 0x0A) |
| 1272 | #define AFE_PORT_ID_TERTIARY_TDM_RX_6 \ |
| 1273 | (AFE_PORT_ID_TERTIARY_TDM_RX + 0x0C) |
| 1274 | #define AFE_PORT_ID_TERTIARY_TDM_RX_7 \ |
| 1275 | (AFE_PORT_ID_TERTIARY_TDM_RX + 0x0E) |
| 1276 | |
| 1277 | #define AFE_PORT_ID_TERTIARY_TDM_TX \ |
| 1278 | (AFE_PORT_ID_TDM_PORT_RANGE_START + 0x21) |
| 1279 | #define AFE_PORT_ID_TERTIARY_TDM_TX_1 \ |
| 1280 | (AFE_PORT_ID_TERTIARY_TDM_TX + 0x02) |
| 1281 | #define AFE_PORT_ID_TERTIARY_TDM_TX_2 \ |
| 1282 | (AFE_PORT_ID_TERTIARY_TDM_TX + 0x04) |
| 1283 | #define AFE_PORT_ID_TERTIARY_TDM_TX_3 \ |
| 1284 | (AFE_PORT_ID_TERTIARY_TDM_TX + 0x06) |
| 1285 | #define AFE_PORT_ID_TERTIARY_TDM_TX_4 \ |
| 1286 | (AFE_PORT_ID_TERTIARY_TDM_TX + 0x08) |
| 1287 | #define AFE_PORT_ID_TERTIARY_TDM_TX_5 \ |
| 1288 | (AFE_PORT_ID_TERTIARY_TDM_TX + 0x0A) |
| 1289 | #define AFE_PORT_ID_TERTIARY_TDM_TX_6 \ |
| 1290 | (AFE_PORT_ID_TERTIARY_TDM_TX + 0x0C) |
| 1291 | #define AFE_PORT_ID_TERTIARY_TDM_TX_7 \ |
| 1292 | (AFE_PORT_ID_TERTIARY_TDM_TX + 0x0E) |
| 1293 | |
| 1294 | #define AFE_PORT_ID_QUATERNARY_TDM_RX \ |
| 1295 | (AFE_PORT_ID_TDM_PORT_RANGE_START + 0x30) |
| 1296 | #define AFE_PORT_ID_QUATERNARY_TDM_RX_1 \ |
| 1297 | (AFE_PORT_ID_QUATERNARY_TDM_RX + 0x02) |
| 1298 | #define AFE_PORT_ID_QUATERNARY_TDM_RX_2 \ |
| 1299 | (AFE_PORT_ID_QUATERNARY_TDM_RX + 0x04) |
| 1300 | #define AFE_PORT_ID_QUATERNARY_TDM_RX_3 \ |
| 1301 | (AFE_PORT_ID_QUATERNARY_TDM_RX + 0x06) |
| 1302 | #define AFE_PORT_ID_QUATERNARY_TDM_RX_4 \ |
| 1303 | (AFE_PORT_ID_QUATERNARY_TDM_RX + 0x08) |
| 1304 | #define AFE_PORT_ID_QUATERNARY_TDM_RX_5 \ |
| 1305 | (AFE_PORT_ID_QUATERNARY_TDM_RX + 0x0A) |
| 1306 | #define AFE_PORT_ID_QUATERNARY_TDM_RX_6 \ |
| 1307 | (AFE_PORT_ID_QUATERNARY_TDM_RX + 0x0C) |
| 1308 | #define AFE_PORT_ID_QUATERNARY_TDM_RX_7 \ |
| 1309 | (AFE_PORT_ID_QUATERNARY_TDM_RX + 0x0E) |
| 1310 | |
| 1311 | #define AFE_PORT_ID_QUATERNARY_TDM_TX \ |
| 1312 | (AFE_PORT_ID_TDM_PORT_RANGE_START + 0x31) |
| 1313 | #define AFE_PORT_ID_QUATERNARY_TDM_TX_1 \ |
| 1314 | (AFE_PORT_ID_QUATERNARY_TDM_TX + 0x02) |
| 1315 | #define AFE_PORT_ID_QUATERNARY_TDM_TX_2 \ |
| 1316 | (AFE_PORT_ID_QUATERNARY_TDM_TX + 0x04) |
| 1317 | #define AFE_PORT_ID_QUATERNARY_TDM_TX_3 \ |
| 1318 | (AFE_PORT_ID_QUATERNARY_TDM_TX + 0x06) |
| 1319 | #define AFE_PORT_ID_QUATERNARY_TDM_TX_4 \ |
| 1320 | (AFE_PORT_ID_QUATERNARY_TDM_TX + 0x08) |
| 1321 | #define AFE_PORT_ID_QUATERNARY_TDM_TX_5 \ |
| 1322 | (AFE_PORT_ID_QUATERNARY_TDM_TX + 0x0A) |
| 1323 | #define AFE_PORT_ID_QUATERNARY_TDM_TX_6 \ |
| 1324 | (AFE_PORT_ID_QUATERNARY_TDM_TX + 0x0C) |
| 1325 | #define AFE_PORT_ID_QUATERNARY_TDM_TX_7 \ |
| 1326 | (AFE_PORT_ID_QUATERNARY_TDM_TX + 0x0E) |
| 1327 | |
| 1328 | #define AFE_PORT_ID_INVALID 0xFFFF |
| 1329 | |
| 1330 | #define AAC_ENC_MODE_AAC_LC 0x02 |
| 1331 | #define AAC_ENC_MODE_AAC_P 0x05 |
| 1332 | #define AAC_ENC_MODE_EAAC_P 0x1D |
| 1333 | |
| 1334 | #define AFE_PSEUDOPORT_CMD_START 0x000100cf |
| 1335 | struct afe_pseudoport_start_command { |
| 1336 | struct apr_hdr hdr; |
| 1337 | u16 port_id; /* Pseudo Port 1 = 0x8000 */ |
| 1338 | /* Pseudo Port 2 = 0x8001 */ |
| 1339 | /* Pseudo Port 3 = 0x8002 */ |
| 1340 | u16 timing; /* FTRT = 0 , AVTimer = 1, */ |
| 1341 | } __packed; |
| 1342 | |
| 1343 | #define AFE_PSEUDOPORT_CMD_STOP 0x000100d0 |
| 1344 | struct afe_pseudoport_stop_command { |
| 1345 | struct apr_hdr hdr; |
| 1346 | u16 port_id; /* Pseudo Port 1 = 0x8000 */ |
| 1347 | /* Pseudo Port 2 = 0x8001 */ |
| 1348 | /* Pseudo Port 3 = 0x8002 */ |
| 1349 | u16 reserved; |
| 1350 | } __packed; |
| 1351 | |
| 1352 | |
| 1353 | #define AFE_MODULE_SIDETONE_IIR_FILTER 0x00010202 |
| 1354 | #define AFE_PARAM_ID_ENABLE 0x00010203 |
| 1355 | |
| 1356 | /* Payload of the #AFE_PARAM_ID_ENABLE |
| 1357 | * parameter, which enables or |
| 1358 | * disables any module. |
| 1359 | * The fixed size of this structure is four bytes. |
| 1360 | */ |
| 1361 | |
| 1362 | struct afe_mod_enable_param { |
| 1363 | u16 enable; |
| 1364 | /* Enables (1) or disables (0) the module. */ |
| 1365 | |
| 1366 | u16 reserved; |
| 1367 | /* This field must be set to zero. */ |
| 1368 | } __packed; |
| 1369 | |
| 1370 | /* ID of the configuration parameter used by the |
| 1371 | * #AFE_MODULE_SIDETONE_IIR_FILTER module. |
| 1372 | */ |
| 1373 | #define AFE_PARAM_ID_SIDETONE_IIR_FILTER_CONFIG 0x00010204 |
| 1374 | #define MAX_SIDETONE_IIR_DATA_SIZE 224 |
| 1375 | #define MAX_NO_IIR_FILTER_STAGE 10 |
| 1376 | |
| 1377 | struct afe_sidetone_iir_filter_config_params { |
| 1378 | u16 num_biquad_stages; |
| 1379 | /* Number of stages. |
| 1380 | * Supported values: Minimum of 5 and maximum of 10 |
| 1381 | */ |
| 1382 | |
| 1383 | u16 pregain; |
| 1384 | /* Pregain for the compensating filter response. |
| 1385 | * Supported values: Any number in Q13 format |
| 1386 | */ |
| 1387 | uint8_t iir_config[MAX_SIDETONE_IIR_DATA_SIZE]; |
| 1388 | } __packed; |
| 1389 | |
| 1390 | #define AFE_MODULE_LOOPBACK 0x00010205 |
| 1391 | #define AFE_PARAM_ID_LOOPBACK_GAIN_PER_PATH 0x00010206 |
| 1392 | |
| 1393 | /* Payload of the #AFE_PARAM_ID_LOOPBACK_GAIN_PER_PATH parameter, |
| 1394 | * which gets/sets loopback gain of a port to an Rx port. |
| 1395 | * The Tx port ID of the loopback is part of the set_param command. |
| 1396 | */ |
| 1397 | |
| 1398 | /* Payload of the #AFE_PORT_CMD_SET_PARAM_V2 command's |
| 1399 | * configuration/calibration settings for the AFE port. |
| 1400 | */ |
| 1401 | struct afe_port_cmd_set_param_v2 { |
| 1402 | u16 port_id; |
| 1403 | /* Port interface and direction (Rx or Tx) to start. */ |
| 1404 | |
| 1405 | u16 payload_size; |
| 1406 | /* Actual size of the payload in bytes. |
| 1407 | * This is used for parsing the parameter payload. |
| 1408 | * Supported values: > 0 |
| 1409 | */ |
| 1410 | |
| 1411 | u32 payload_address_lsw; |
| 1412 | /* LSW of 64 bit Payload address. |
| 1413 | * Address should be 32-byte, |
| 1414 | * 4kbyte aligned and must be contiguous memory. |
| 1415 | */ |
| 1416 | |
| 1417 | u32 payload_address_msw; |
| 1418 | /* MSW of 64 bit Payload address. |
| 1419 | * In case of 32-bit shared memory address, |
| 1420 | * this field must be set to zero. |
| 1421 | * In case of 36-bit shared memory address, |
| 1422 | * bit-4 to bit-31 must be set to zero. |
| 1423 | * Address should be 32-byte, 4kbyte aligned |
| 1424 | * and must be contiguous memory. |
| 1425 | */ |
| 1426 | |
| 1427 | u32 mem_map_handle; |
| 1428 | /* Memory map handle returned by |
| 1429 | * AFE_SERVICE_CMD_SHARED_MEM_MAP_REGIONS commands. |
| 1430 | * Supported Values: |
| 1431 | * - NULL -- Message. The parameter data is in-band. |
| 1432 | * - Non-NULL -- The parameter data is Out-band.Pointer to |
| 1433 | * the physical address |
| 1434 | * in shared memory of the payload data. |
| 1435 | * An optional field is available if parameter |
| 1436 | * data is in-band: |
| 1437 | * afe_param_data_v2 param_data[...]. |
| 1438 | * For detailed payload content, see the |
| 1439 | * afe_port_param_data_v2 structure. |
| 1440 | */ |
| 1441 | } __packed; |
| 1442 | |
| 1443 | #define AFE_PORT_CMD_SET_PARAM_V2 0x000100EF |
| 1444 | |
| 1445 | struct afe_port_param_data_v2 { |
| 1446 | u32 module_id; |
| 1447 | /* ID of the module to be configured. |
| 1448 | * Supported values: Valid module ID |
| 1449 | */ |
| 1450 | |
| 1451 | u32 param_id; |
| 1452 | /* ID of the parameter corresponding to the supported parameters |
| 1453 | * for the module ID. |
| 1454 | * Supported values: Valid parameter ID |
| 1455 | */ |
| 1456 | |
| 1457 | u16 param_size; |
| 1458 | /* Actual size of the data for the |
| 1459 | * module_id/param_id pair. The size is a |
| 1460 | * multiple of four bytes. |
| 1461 | * Supported values: > 0 |
| 1462 | */ |
| 1463 | |
| 1464 | u16 reserved; |
| 1465 | /* This field must be set to zero. |
| 1466 | */ |
| 1467 | } __packed; |
| 1468 | |
| 1469 | struct afe_loopback_gain_per_path_param { |
| 1470 | struct apr_hdr hdr; |
| 1471 | struct afe_port_cmd_set_param_v2 param; |
| 1472 | struct afe_port_param_data_v2 pdata; |
| 1473 | u16 rx_port_id; |
| 1474 | /* Rx port of the loopback. */ |
| 1475 | |
| 1476 | u16 gain; |
| 1477 | /* Loopback gain per path of the port. |
| 1478 | * Supported values: Any number in Q13 format |
| 1479 | */ |
| 1480 | } __packed; |
| 1481 | |
| 1482 | /* Parameter ID used to configure and enable/disable the |
| 1483 | * loopback path. The difference with respect to the existing |
| 1484 | * API, AFE_PORT_CMD_LOOPBACK, is that it allows Rx port to be |
| 1485 | * configured as source port in loopback path. Port-id in |
| 1486 | * AFE_PORT_CMD_SET_PARAM cmd is the source port which can be |
| 1487 | * Tx or Rx port. In addition, we can configure the type of |
| 1488 | * routing mode to handle different use cases. |
| 1489 | */ |
| 1490 | #define AFE_PARAM_ID_LOOPBACK_CONFIG 0x0001020B |
| 1491 | #define AFE_API_VERSION_LOOPBACK_CONFIG 0x1 |
| 1492 | |
| 1493 | enum afe_loopback_routing_mode { |
| 1494 | LB_MODE_DEFAULT = 1, |
| 1495 | /* Regular loopback from source to destination port */ |
| 1496 | LB_MODE_SIDETONE, |
| 1497 | /* Sidetone feed from Tx source to Rx destination port */ |
| 1498 | LB_MODE_EC_REF_VOICE_AUDIO, |
| 1499 | /* Echo canceller reference, voice + audio + DTMF */ |
| 1500 | LB_MODE_EC_REF_VOICE |
| 1501 | /* Echo canceller reference, voice alone */ |
| 1502 | } __packed; |
| 1503 | |
| 1504 | /* Payload of the #AFE_PARAM_ID_LOOPBACK_CONFIG , |
| 1505 | * which enables/disables one AFE loopback. |
| 1506 | */ |
| 1507 | struct afe_loopback_cfg_v1 { |
| 1508 | struct apr_hdr hdr; |
| 1509 | struct afe_port_cmd_set_param_v2 param; |
| 1510 | struct afe_port_param_data_v2 pdata; |
| 1511 | u32 loopback_cfg_minor_version; |
| 1512 | /* Minor version used for tracking the version of the RMC module |
| 1513 | * configuration interface. |
| 1514 | * Supported values: #AFE_API_VERSION_LOOPBACK_CONFIG |
| 1515 | */ |
| 1516 | u16 dst_port_id; |
| 1517 | /* Destination Port Id. */ |
| 1518 | u16 routing_mode; |
| 1519 | /* Specifies data path type from src to dest port. |
| 1520 | * Supported values: |
| 1521 | * #LB_MODE_DEFAULT |
| 1522 | * #LB_MODE_SIDETONE |
| 1523 | * #LB_MODE_EC_REF_VOICE_AUDIO |
| 1524 | * #LB_MODE_EC_REF_VOICE_A |
| 1525 | * #LB_MODE_EC_REF_VOICE |
| 1526 | */ |
| 1527 | |
| 1528 | u16 enable; |
| 1529 | /* Specifies whether to enable (1) or |
| 1530 | * disable (0) an AFE loopback. |
| 1531 | */ |
| 1532 | u16 reserved; |
| 1533 | /* Reserved for 32-bit alignment. This field must be set to 0. |
| 1534 | */ |
| 1535 | |
| 1536 | } __packed; |
| 1537 | |
| 1538 | struct afe_loopback_sidetone_gain { |
| 1539 | u16 rx_port_id; |
| 1540 | u16 gain; |
| 1541 | } __packed; |
| 1542 | |
| 1543 | struct loopback_cfg_data { |
| 1544 | u32 loopback_cfg_minor_version; |
| 1545 | /* Minor version used for tracking the version of the RMC module |
| 1546 | * configuration interface. |
| 1547 | * Supported values: #AFE_API_VERSION_LOOPBACK_CONFIG |
| 1548 | */ |
| 1549 | u16 dst_port_id; |
| 1550 | /* Destination Port Id. */ |
| 1551 | u16 routing_mode; |
| 1552 | /* Specifies data path type from src to dest port. |
| 1553 | * Supported values: |
| 1554 | * #LB_MODE_DEFAULT |
| 1555 | * #LB_MODE_SIDETONE |
| 1556 | * #LB_MODE_EC_REF_VOICE_AUDIO |
| 1557 | * #LB_MODE_EC_REF_VOICE_A |
| 1558 | * #LB_MODE_EC_REF_VOICE |
| 1559 | */ |
| 1560 | |
| 1561 | u16 enable; |
| 1562 | /* Specifies whether to enable (1) or |
| 1563 | * disable (0) an AFE loopback. |
| 1564 | */ |
| 1565 | u16 reserved; |
| 1566 | /* Reserved for 32-bit alignment. This field must be set to 0. |
| 1567 | */ |
| 1568 | } __packed; |
| 1569 | |
| 1570 | struct afe_st_loopback_cfg_v1 { |
| 1571 | struct apr_hdr hdr; |
| 1572 | struct afe_port_cmd_set_param_v2 param; |
| 1573 | struct afe_port_param_data_v2 gain_pdata; |
| 1574 | struct afe_loopback_sidetone_gain gain_data; |
| 1575 | struct afe_port_param_data_v2 cfg_pdata; |
| 1576 | struct loopback_cfg_data cfg_data; |
| 1577 | } __packed; |
| 1578 | |
| 1579 | struct afe_loopback_iir_cfg_v2 { |
| 1580 | struct apr_hdr hdr; |
| 1581 | struct afe_port_cmd_set_param_v2 param; |
| 1582 | struct afe_port_param_data_v2 st_iir_enable_pdata; |
| 1583 | struct afe_mod_enable_param st_iir_mode_enable_data; |
| 1584 | struct afe_port_param_data_v2 st_iir_filter_config_pdata; |
| 1585 | struct afe_sidetone_iir_filter_config_params st_iir_filter_config_data; |
| 1586 | } __packed; |
| 1587 | #define AFE_MODULE_SPEAKER_PROTECTION 0x00010209 |
| 1588 | #define AFE_PARAM_ID_SPKR_PROT_CONFIG 0x0001020a |
| 1589 | #define AFE_API_VERSION_SPKR_PROT_CONFIG 0x1 |
| 1590 | #define AFE_SPKR_PROT_EXCURSIONF_LEN 512 |
| 1591 | struct afe_spkr_prot_cfg_param_v1 { |
| 1592 | u32 spkr_prot_minor_version; |
| 1593 | /* |
| 1594 | * Minor version used for tracking the version of the |
| 1595 | * speaker protection module configuration interface. |
| 1596 | * Supported values: #AFE_API_VERSION_SPKR_PROT_CONFIG |
| 1597 | */ |
| 1598 | |
| 1599 | int16_t win_size; |
| 1600 | /* Analysis and synthesis window size (nWinSize). |
| 1601 | * Supported values: 1024, 512, 256 samples |
| 1602 | */ |
| 1603 | |
| 1604 | int16_t margin; |
| 1605 | /* Allowable margin for excursion prediction, |
| 1606 | * in L16Q15 format. This is a |
| 1607 | * control parameter to allow |
| 1608 | * for overestimation of peak excursion. |
| 1609 | */ |
| 1610 | |
| 1611 | int16_t spkr_exc_limit; |
| 1612 | /* Speaker excursion limit, in L16Q15 format.*/ |
| 1613 | |
| 1614 | int16_t spkr_resonance_freq; |
| 1615 | /* Resonance frequency of the speaker; used |
| 1616 | * to define a frequency range |
| 1617 | * for signal modification. |
| 1618 | * |
| 1619 | * Supported values: 0 to 2000 Hz |
| 1620 | */ |
| 1621 | |
| 1622 | int16_t limhresh; |
| 1623 | /* Threshold of the hard limiter; used to |
| 1624 | * prevent overshooting beyond a |
| 1625 | * signal level that was set by the limiter |
| 1626 | * prior to speaker protection. |
| 1627 | * Supported values: 0 to 32767 |
| 1628 | */ |
| 1629 | |
| 1630 | int16_t hpf_cut_off_freq; |
| 1631 | /* High pass filter cutoff frequency. |
| 1632 | * Supported values: 100, 200, 300 Hz |
| 1633 | */ |
| 1634 | |
| 1635 | int16_t hpf_enable; |
| 1636 | /* Specifies whether the high pass filter |
| 1637 | * is enabled (0) or disabled (1). |
| 1638 | */ |
| 1639 | |
| 1640 | int16_t reserved; |
| 1641 | /* This field must be set to zero. */ |
| 1642 | |
| 1643 | int32_t amp_gain; |
| 1644 | /* Amplifier gain in L32Q15 format. |
| 1645 | * This is the RMS voltage at the |
| 1646 | * loudspeaker when a 0dBFS tone |
| 1647 | * is played in the digital domain. |
| 1648 | */ |
| 1649 | |
| 1650 | int16_t excursionf[AFE_SPKR_PROT_EXCURSIONF_LEN]; |
| 1651 | /* Array of the excursion transfer function. |
| 1652 | * The peak excursion of the |
| 1653 | * loudspeaker diaphragm is |
| 1654 | * measured in millimeters for 1 Vrms Sine |
| 1655 | * tone at all FFT bin frequencies. |
| 1656 | * Supported values: Q15 format |
| 1657 | */ |
| 1658 | } __packed; |
| 1659 | |
| 1660 | |
| 1661 | #define AFE_SERVICE_CMD_REGISTER_RT_PORT_DRIVER 0x000100E0 |
| 1662 | |
| 1663 | /* Payload of the #AFE_SERVICE_CMD_REGISTER_RT_PORT_DRIVER |
| 1664 | * command, which registers a real-time port driver |
| 1665 | * with the AFE service. |
| 1666 | */ |
| 1667 | struct afe_service_cmd_register_rt_port_driver { |
| 1668 | struct apr_hdr hdr; |
| 1669 | u16 port_id; |
| 1670 | /* Port ID with which the real-time driver exchanges data |
| 1671 | * (registers for events). |
| 1672 | * Supported values: #AFE_PORT_ID_RT_PROXY_PORT_RANGE_START to |
| 1673 | * #AFE_PORT_ID_RT_PROXY_PORT_RANGE_END |
| 1674 | */ |
| 1675 | |
| 1676 | u16 reserved; |
| 1677 | /* This field must be set to zero. */ |
| 1678 | } __packed; |
| 1679 | |
| 1680 | #define AFE_SERVICE_CMD_UNREGISTER_RT_PORT_DRIVER 0x000100E1 |
| 1681 | |
| 1682 | /* Payload of the #AFE_SERVICE_CMD_UNREGISTER_RT_PORT_DRIVER |
| 1683 | * command, which unregisters a real-time port driver from |
| 1684 | * the AFE service. |
| 1685 | */ |
| 1686 | struct afe_service_cmd_unregister_rt_port_driver { |
| 1687 | struct apr_hdr hdr; |
| 1688 | u16 port_id; |
| 1689 | /* Port ID from which the real-time |
| 1690 | * driver unregisters for events. |
| 1691 | * Supported values: #AFE_PORT_ID_RT_PROXY_PORT_RANGE_START to |
| 1692 | * #AFE_PORT_ID_RT_PROXY_PORT_RANGE_END |
| 1693 | */ |
| 1694 | |
| 1695 | u16 reserved; |
| 1696 | /* This field must be set to zero. */ |
| 1697 | } __packed; |
| 1698 | |
| 1699 | #define AFE_EVENT_RT_PROXY_PORT_STATUS 0x00010105 |
| 1700 | #define AFE_EVENTYPE_RT_PROXY_PORT_START 0 |
| 1701 | #define AFE_EVENTYPE_RT_PROXY_PORT_STOP 1 |
| 1702 | #define AFE_EVENTYPE_RT_PROXY_PORT_LOW_WATER_MARK 2 |
| 1703 | #define AFE_EVENTYPE_RT_PROXY_PORT_HIGH_WATER_MARK 3 |
| 1704 | #define AFE_EVENTYPE_RT_PROXY_PORT_INVALID 0xFFFF |
| 1705 | |
| 1706 | /* Payload of the #AFE_EVENT_RT_PROXY_PORT_STATUS |
| 1707 | * message, which sends an event from the AFE service |
| 1708 | * to a registered client. |
| 1709 | */ |
| 1710 | struct afe_event_rt_proxy_port_status { |
| 1711 | u16 port_id; |
| 1712 | /* Port ID to which the event is sent. |
| 1713 | * Supported values: #AFE_PORT_ID_RT_PROXY_PORT_RANGE_START to |
| 1714 | * #AFE_PORT_ID_RT_PROXY_PORT_RANGE_END |
| 1715 | */ |
| 1716 | |
| 1717 | u16 eventype; |
| 1718 | /* Type of event. |
| 1719 | * Supported values: |
| 1720 | * - #AFE_EVENTYPE_RT_PROXY_PORT_START |
| 1721 | * - #AFE_EVENTYPE_RT_PROXY_PORT_STOP |
| 1722 | * - #AFE_EVENTYPE_RT_PROXY_PORT_LOW_WATER_MARK |
| 1723 | * - #AFE_EVENTYPE_RT_PROXY_PORT_HIGH_WATER_MARK |
| 1724 | */ |
| 1725 | } __packed; |
| 1726 | |
| 1727 | #define AFE_PORT_DATA_CMD_RT_PROXY_PORT_WRITE_V2 0x000100ED |
| 1728 | |
| 1729 | struct afe_port_data_cmd_rt_proxy_port_write_v2 { |
| 1730 | struct apr_hdr hdr; |
| 1731 | u16 port_id; |
| 1732 | /* Tx (mic) proxy port ID with which the real-time |
| 1733 | * driver exchanges data. |
| 1734 | * Supported values: #AFE_PORT_ID_RT_PROXY_PORT_RANGE_START to |
| 1735 | * #AFE_PORT_ID_RT_PROXY_PORT_RANGE_END |
| 1736 | */ |
| 1737 | |
| 1738 | u16 reserved; |
| 1739 | /* This field must be set to zero. */ |
| 1740 | |
| 1741 | u32 buffer_address_lsw; |
| 1742 | /* LSW Address of the buffer containing the |
| 1743 | * data from the real-time source |
| 1744 | * device on a client. |
| 1745 | */ |
| 1746 | |
| 1747 | u32 buffer_address_msw; |
| 1748 | /* MSW Address of the buffer containing the |
| 1749 | * data from the real-time source |
| 1750 | * device on a client. |
| 1751 | */ |
| 1752 | |
| 1753 | u32 mem_map_handle; |
| 1754 | /* A memory map handle encapsulating shared memory |
| 1755 | * attributes is returned if |
| 1756 | * AFE_SERVICE_CMD_SHARED_MEM_MAP_REGIONS |
| 1757 | * command is successful. |
| 1758 | * Supported Values: |
| 1759 | * - Any 32 bit value |
| 1760 | */ |
| 1761 | |
| 1762 | u32 available_bytes; |
| 1763 | /* Number of valid bytes available |
| 1764 | * in the buffer (including all |
| 1765 | * channels: number of bytes per |
| 1766 | * channel = availableBytesumChannels). |
| 1767 | * Supported values: > 0 |
| 1768 | * |
| 1769 | * This field must be equal to the frame |
| 1770 | * size specified in the #AFE_PORT_AUDIO_IF_CONFIG |
| 1771 | * command that was sent to configure this |
| 1772 | * port. |
| 1773 | */ |
| 1774 | } __packed; |
| 1775 | |
| 1776 | #define AFE_PORT_DATA_CMD_RT_PROXY_PORT_READ_V2 0x000100EE |
| 1777 | |
| 1778 | /* Payload of the |
| 1779 | * #AFE_PORT_DATA_CMD_RT_PROXY_PORT_READ_V2 command, which |
| 1780 | * delivers an empty buffer to the AFE service. On |
| 1781 | * acknowledgment, data is filled in the buffer. |
| 1782 | */ |
| 1783 | struct afe_port_data_cmd_rt_proxy_port_read_v2 { |
| 1784 | struct apr_hdr hdr; |
| 1785 | u16 port_id; |
| 1786 | /* Rx proxy port ID with which the real-time |
| 1787 | * driver exchanges data. |
| 1788 | * Supported values: #AFE_PORT_ID_RT_PROXY_PORT_RANGE_START to |
| 1789 | * #AFE_PORT_ID_RT_PROXY_PORT_RANGE_END |
| 1790 | * (This must be an Rx (speaker) port.) |
| 1791 | */ |
| 1792 | |
| 1793 | u16 reserved; |
| 1794 | /* This field must be set to zero. */ |
| 1795 | |
| 1796 | u32 buffer_address_lsw; |
| 1797 | /* LSW Address of the buffer containing the data sent from the AFE |
| 1798 | * service to a real-time sink device on the client. |
| 1799 | */ |
| 1800 | |
| 1801 | |
| 1802 | u32 buffer_address_msw; |
| 1803 | /* MSW Address of the buffer containing the data sent from the AFE |
| 1804 | * service to a real-time sink device on the client. |
| 1805 | */ |
| 1806 | |
| 1807 | u32 mem_map_handle; |
| 1808 | /* A memory map handle encapsulating shared memory attributes is |
| 1809 | * returned if AFE_SERVICE_CMD_SHARED_MEM_MAP_REGIONS command is |
| 1810 | * successful. |
| 1811 | * Supported Values: |
| 1812 | * - Any 32 bit value |
| 1813 | */ |
| 1814 | |
| 1815 | u32 available_bytes; |
| 1816 | /* Number of valid bytes available in the buffer (including all |
| 1817 | * channels). |
| 1818 | * Supported values: > 0 |
| 1819 | * This field must be equal to the frame size specified in the |
| 1820 | * #AFE_PORT_AUDIO_IF_CONFIG command that was sent to configure |
| 1821 | * this port. |
| 1822 | */ |
| 1823 | } __packed; |
| 1824 | |
| 1825 | /* This module ID is related to device configuring like I2S,PCM, |
| 1826 | * HDMI, SLIMBus etc. This module supports following parameter ids. |
| 1827 | * - #AFE_PARAM_ID_I2S_CONFIG |
| 1828 | * - #AFE_PARAM_ID_PCM_CONFIG |
| 1829 | * - #AFE_PARAM_ID_DIGI_MIC_CONFIG |
| 1830 | * - #AFE_PARAM_ID_HDMI_CONFIG |
| 1831 | * - #AFE_PARAM_ID_INTERNAL_BT_FM_CONFIG |
| 1832 | * - #AFE_PARAM_ID_SLIMBUS_CONFIG |
| 1833 | * - #AFE_PARAM_ID_RT_PROXY_CONFIG |
| 1834 | */ |
| 1835 | |
| 1836 | #define AFE_MODULE_AUDIO_DEV_INTERFACE 0x0001020C |
| 1837 | #define AFE_PORT_SAMPLE_RATE_8K 8000 |
| 1838 | #define AFE_PORT_SAMPLE_RATE_16K 16000 |
| 1839 | #define AFE_PORT_SAMPLE_RATE_48K 48000 |
| 1840 | #define AFE_PORT_SAMPLE_RATE_96K 96000 |
| 1841 | #define AFE_PORT_SAMPLE_RATE_176P4K 176400 |
| 1842 | #define AFE_PORT_SAMPLE_RATE_192K 192000 |
| 1843 | #define AFE_PORT_SAMPLE_RATE_352P8K 352800 |
| 1844 | #define AFE_LINEAR_PCM_DATA 0x0 |
| 1845 | #define AFE_NON_LINEAR_DATA 0x1 |
| 1846 | #define AFE_LINEAR_PCM_DATA_PACKED_60958 0x2 |
| 1847 | #define AFE_NON_LINEAR_DATA_PACKED_60958 0x3 |
| 1848 | #define AFE_GENERIC_COMPRESSED 0x8 |
| 1849 | |
| 1850 | /* This param id is used to configure I2S interface */ |
| 1851 | #define AFE_PARAM_ID_I2S_CONFIG 0x0001020D |
| 1852 | #define AFE_API_VERSION_I2S_CONFIG 0x1 |
| 1853 | /* Enumeration for setting the I2S configuration |
| 1854 | * channel_mode parameter to |
| 1855 | * serial data wire number 1-3 (SD3). |
| 1856 | */ |
| 1857 | #define AFE_PORT_I2S_SD0 0x1 |
| 1858 | #define AFE_PORT_I2S_SD1 0x2 |
| 1859 | #define AFE_PORT_I2S_SD2 0x3 |
| 1860 | #define AFE_PORT_I2S_SD3 0x4 |
| 1861 | #define AFE_PORT_I2S_QUAD01 0x5 |
| 1862 | #define AFE_PORT_I2S_QUAD23 0x6 |
| 1863 | #define AFE_PORT_I2S_6CHS 0x7 |
| 1864 | #define AFE_PORT_I2S_8CHS 0x8 |
| 1865 | #define AFE_PORT_I2S_MONO 0x0 |
| 1866 | #define AFE_PORT_I2S_STEREO 0x1 |
| 1867 | #define AFE_PORT_CONFIG_I2S_WS_SRC_EXTERNAL 0x0 |
| 1868 | #define AFE_PORT_CONFIG_I2S_WS_SRC_INTERNAL 0x1 |
| 1869 | |
| 1870 | /* Payload of the #AFE_PARAM_ID_I2S_CONFIG |
| 1871 | * command's (I2S configuration |
| 1872 | * parameter). |
| 1873 | */ |
| 1874 | struct afe_param_id_i2s_cfg { |
| 1875 | u32 i2s_cfg_minor_version; |
| 1876 | /* Minor version used for tracking the version of the I2S |
| 1877 | * configuration interface. |
| 1878 | * Supported values: #AFE_API_VERSION_I2S_CONFIG |
| 1879 | */ |
| 1880 | |
| 1881 | u16 bit_width; |
| 1882 | /* Bit width of the sample. |
| 1883 | * Supported values: 16, 24 |
| 1884 | */ |
| 1885 | |
| 1886 | u16 channel_mode; |
| 1887 | /* I2S lines and multichannel operation. |
| 1888 | * Supported values: |
| 1889 | * - #AFE_PORT_I2S_SD0 |
| 1890 | * - #AFE_PORT_I2S_SD1 |
| 1891 | * - #AFE_PORT_I2S_SD2 |
| 1892 | * - #AFE_PORT_I2S_SD3 |
| 1893 | * - #AFE_PORT_I2S_QUAD01 |
| 1894 | * - #AFE_PORT_I2S_QUAD23 |
| 1895 | * - #AFE_PORT_I2S_6CHS |
| 1896 | * - #AFE_PORT_I2S_8CHS |
| 1897 | */ |
| 1898 | |
| 1899 | u16 mono_stereo; |
| 1900 | /* Specifies mono or stereo. This applies only when |
| 1901 | * a single I2S line is used. |
| 1902 | * Supported values: |
| 1903 | * - #AFE_PORT_I2S_MONO |
| 1904 | * - #AFE_PORT_I2S_STEREO |
| 1905 | */ |
| 1906 | |
| 1907 | u16 ws_src; |
| 1908 | /* Word select source: internal or external. |
| 1909 | * Supported values: |
| 1910 | * - #AFE_PORT_CONFIG_I2S_WS_SRC_EXTERNAL |
| 1911 | * - #AFE_PORT_CONFIG_I2S_WS_SRC_INTERNAL |
| 1912 | */ |
| 1913 | |
| 1914 | u32 sample_rate; |
| 1915 | /* Sampling rate of the port. |
| 1916 | * Supported values: |
| 1917 | * - #AFE_PORT_SAMPLE_RATE_8K |
| 1918 | * - #AFE_PORT_SAMPLE_RATE_16K |
| 1919 | * - #AFE_PORT_SAMPLE_RATE_48K |
| 1920 | * - #AFE_PORT_SAMPLE_RATE_96K |
| 1921 | * - #AFE_PORT_SAMPLE_RATE_192K |
| 1922 | */ |
| 1923 | |
| 1924 | u16 data_format; |
| 1925 | /* data format |
| 1926 | * Supported values: |
| 1927 | * - #LINEAR_PCM_DATA |
| 1928 | * - #NON_LINEAR_DATA |
| 1929 | * - #LINEAR_PCM_DATA_PACKED_IN_60958 |
| 1930 | * - #NON_LINEAR_DATA_PACKED_IN_60958 |
| 1931 | */ |
| 1932 | u16 reserved; |
| 1933 | /* This field must be set to zero. */ |
| 1934 | } __packed; |
| 1935 | |
| 1936 | /* |
| 1937 | * This param id is used to configure PCM interface |
| 1938 | */ |
| 1939 | |
| 1940 | #define AFE_API_VERSION_SPDIF_CONFIG 0x1 |
| 1941 | #define AFE_API_VERSION_SPDIF_CH_STATUS_CONFIG 0x1 |
| 1942 | #define AFE_API_VERSION_SPDIF_CLK_CONFIG 0x1 |
| 1943 | #define AFE_CH_STATUS_A 1 |
| 1944 | #define AFE_CH_STATUS_B 2 |
| 1945 | |
| 1946 | #define AFE_PARAM_ID_SPDIF_CONFIG 0x00010244 |
| 1947 | #define AFE_PARAM_ID_CH_STATUS_CONFIG 0x00010245 |
| 1948 | #define AFE_PARAM_ID_SPDIF_CLK_CONFIG 0x00010246 |
| 1949 | |
| 1950 | #define AFE_PORT_CLK_ROOT_LPAPLL 0x3 |
| 1951 | #define AFE_PORT_CLK_ROOT_LPAQ6PLL 0x4 |
| 1952 | |
| 1953 | struct afe_param_id_spdif_cfg { |
| 1954 | /* Minor version used for tracking the version of the SPDIF |
| 1955 | * configuration interface. |
| 1956 | * Supported values: #AFE_API_VERSION_SPDIF_CONFIG |
| 1957 | */ |
| 1958 | u32 spdif_cfg_minor_version; |
| 1959 | |
| 1960 | /* Sampling rate of the port. |
| 1961 | * Supported values: |
| 1962 | * - #AFE_PORT_SAMPLE_RATE_22_05K |
| 1963 | * - #AFE_PORT_SAMPLE_RATE_32K |
| 1964 | * - #AFE_PORT_SAMPLE_RATE_44_1K |
| 1965 | * - #AFE_PORT_SAMPLE_RATE_48K |
| 1966 | * - #AFE_PORT_SAMPLE_RATE_96K |
| 1967 | * - #AFE_PORT_SAMPLE_RATE_176_4K |
| 1968 | * - #AFE_PORT_SAMPLE_RATE_192K |
| 1969 | */ |
| 1970 | u32 sample_rate; |
| 1971 | |
| 1972 | /* data format |
| 1973 | * Supported values: |
| 1974 | * - #AFE_LINEAR_PCM_DATA |
| 1975 | * - #AFE_NON_LINEAR_DATA |
| 1976 | */ |
| 1977 | u16 data_format; |
| 1978 | /* Number of channels supported by the port |
| 1979 | * - PCM - 1, Compressed Case - 2 |
| 1980 | */ |
| 1981 | u16 num_channels; |
| 1982 | /* Bit width of the sample. |
| 1983 | * Supported values: 16, 24 |
| 1984 | */ |
| 1985 | u16 bit_width; |
| 1986 | /* This field must be set to zero. */ |
| 1987 | u16 reserved; |
| 1988 | } __packed; |
| 1989 | |
| 1990 | struct afe_param_id_spdif_ch_status_cfg { |
| 1991 | u32 ch_status_cfg_minor_version; |
| 1992 | /* Minor version used for tracking the version of channel |
| 1993 | * status configuration. Current supported version is 1 |
| 1994 | */ |
| 1995 | |
| 1996 | u32 status_type; |
| 1997 | /* Indicate if the channel status is for channel A or B |
| 1998 | * Supported values: |
| 1999 | * - #AFE_CH_STATUS_A |
| 2000 | * - #AFE_CH_STATUS_B |
| 2001 | */ |
| 2002 | |
| 2003 | u8 status_bits[24]; |
| 2004 | /* Channel status - 192 bits for channel |
| 2005 | * Byte ordering as defined by IEC60958-3 |
| 2006 | */ |
| 2007 | |
| 2008 | u8 status_mask[24]; |
| 2009 | /* Channel status with mask bits 1 will be applied. |
| 2010 | * Byte ordering as defined by IEC60958-3 |
| 2011 | */ |
| 2012 | } __packed; |
| 2013 | |
| 2014 | struct afe_param_id_spdif_clk_cfg { |
| 2015 | u32 clk_cfg_minor_version; |
| 2016 | /* Minor version used for tracking the version of SPDIF |
| 2017 | * interface clock configuration. Current supported version |
| 2018 | * is 1 |
| 2019 | */ |
| 2020 | |
| 2021 | u32 clk_value; |
| 2022 | /* Specifies the clock frequency in Hz to set |
| 2023 | * Supported values: |
| 2024 | * 0 - Disable the clock |
| 2025 | * 2 (byphase) * 32 (60958 subframe size) * sampling rate * 2 |
| 2026 | * (channels A and B) |
| 2027 | */ |
| 2028 | |
| 2029 | u32 clk_root; |
| 2030 | /* Specifies SPDIF root clk source |
| 2031 | * Supported Values: |
| 2032 | * - #AFE_PORT_CLK_ROOT_LPAPLL |
| 2033 | * - #AFE_PORT_CLK_ROOT_LPAQ6PLL |
| 2034 | */ |
| 2035 | } __packed; |
| 2036 | |
| 2037 | struct afe_spdif_clk_config_command { |
| 2038 | struct apr_hdr hdr; |
| 2039 | struct afe_port_cmd_set_param_v2 param; |
| 2040 | struct afe_port_param_data_v2 pdata; |
| 2041 | struct afe_param_id_spdif_clk_cfg clk_cfg; |
| 2042 | } __packed; |
| 2043 | |
| 2044 | struct afe_spdif_chstatus_config_command { |
| 2045 | struct apr_hdr hdr; |
| 2046 | struct afe_port_cmd_set_param_v2 param; |
| 2047 | struct afe_port_param_data_v2 pdata; |
| 2048 | struct afe_param_id_spdif_ch_status_cfg ch_status; |
| 2049 | } __packed; |
| 2050 | |
| 2051 | struct afe_spdif_port_config { |
| 2052 | struct afe_param_id_spdif_cfg cfg; |
| 2053 | struct afe_param_id_spdif_ch_status_cfg ch_status; |
| 2054 | } __packed; |
| 2055 | |
| 2056 | #define AFE_PARAM_ID_PCM_CONFIG 0x0001020E |
| 2057 | #define AFE_API_VERSION_PCM_CONFIG 0x1 |
| 2058 | /* Enumeration for the auxiliary PCM synchronization signal |
| 2059 | * provided by an external source. |
| 2060 | */ |
| 2061 | |
| 2062 | #define AFE_PORT_PCM_SYNC_SRC_EXTERNAL 0x0 |
| 2063 | /* Enumeration for the auxiliary PCM synchronization signal |
| 2064 | * provided by an internal source. |
| 2065 | */ |
| 2066 | #define AFE_PORT_PCM_SYNC_SRC_INTERNAL 0x1 |
| 2067 | /* Enumeration for the PCM configuration aux_mode parameter, |
| 2068 | * which configures the auxiliary PCM interface to use |
| 2069 | * short synchronization. |
| 2070 | */ |
| 2071 | #define AFE_PORT_PCM_AUX_MODE_PCM 0x0 |
| 2072 | /* |
| 2073 | * Enumeration for the PCM configuration aux_mode parameter, |
| 2074 | * which configures the auxiliary PCM interface to use long |
| 2075 | * synchronization. |
| 2076 | */ |
| 2077 | #define AFE_PORT_PCM_AUX_MODE_AUX 0x1 |
| 2078 | /* |
| 2079 | * Enumeration for setting the PCM configuration frame to 8. |
| 2080 | */ |
| 2081 | #define AFE_PORT_PCM_BITS_PER_FRAME_8 0x0 |
| 2082 | /* |
| 2083 | * Enumeration for setting the PCM configuration frame to 16. |
| 2084 | */ |
| 2085 | #define AFE_PORT_PCM_BITS_PER_FRAME_16 0x1 |
| 2086 | |
| 2087 | /* Enumeration for setting the PCM configuration frame to 32.*/ |
| 2088 | #define AFE_PORT_PCM_BITS_PER_FRAME_32 0x2 |
| 2089 | |
| 2090 | /* Enumeration for setting the PCM configuration frame to 64.*/ |
| 2091 | #define AFE_PORT_PCM_BITS_PER_FRAME_64 0x3 |
| 2092 | |
| 2093 | /* Enumeration for setting the PCM configuration frame to 128.*/ |
| 2094 | #define AFE_PORT_PCM_BITS_PER_FRAME_128 0x4 |
| 2095 | |
| 2096 | /* Enumeration for setting the PCM configuration frame to 256.*/ |
| 2097 | #define AFE_PORT_PCM_BITS_PER_FRAME_256 0x5 |
| 2098 | |
| 2099 | /* Enumeration for setting the PCM configuration |
| 2100 | * quantype parameter to A-law with no padding. |
| 2101 | */ |
| 2102 | #define AFE_PORT_PCM_ALAW_NOPADDING 0x0 |
| 2103 | |
| 2104 | /* Enumeration for setting the PCM configuration quantype |
| 2105 | * parameter to mu-law with no padding. |
| 2106 | */ |
| 2107 | #define AFE_PORT_PCM_MULAW_NOPADDING 0x1 |
| 2108 | /* Enumeration for setting the PCM configuration quantype |
| 2109 | * parameter to linear with no padding. |
| 2110 | */ |
| 2111 | #define AFE_PORT_PCM_LINEAR_NOPADDING 0x2 |
| 2112 | /* Enumeration for setting the PCM configuration quantype |
| 2113 | * parameter to A-law with padding. |
| 2114 | */ |
| 2115 | #define AFE_PORT_PCM_ALAW_PADDING 0x3 |
| 2116 | /* Enumeration for setting the PCM configuration quantype |
| 2117 | * parameter to mu-law with padding. |
| 2118 | */ |
| 2119 | #define AFE_PORT_PCM_MULAW_PADDING 0x4 |
| 2120 | /* Enumeration for setting the PCM configuration quantype |
| 2121 | * parameter to linear with padding. |
| 2122 | */ |
| 2123 | #define AFE_PORT_PCM_LINEAR_PADDING 0x5 |
| 2124 | /* Enumeration for disabling the PCM configuration |
| 2125 | * ctrl_data_out_enable parameter. |
| 2126 | * The PCM block is the only master. |
| 2127 | */ |
| 2128 | #define AFE_PORT_PCM_CTRL_DATA_OE_DISABLE 0x0 |
| 2129 | /* |
| 2130 | * Enumeration for enabling the PCM configuration |
| 2131 | * ctrl_data_out_enable parameter. The PCM block shares |
| 2132 | * the signal with other masters. |
| 2133 | */ |
| 2134 | #define AFE_PORT_PCM_CTRL_DATA_OE_ENABLE 0x1 |
| 2135 | |
| 2136 | /* Payload of the #AFE_PARAM_ID_PCM_CONFIG command's |
| 2137 | * (PCM configuration parameter). |
| 2138 | */ |
| 2139 | |
| 2140 | struct afe_param_id_pcm_cfg { |
| 2141 | u32 pcm_cfg_minor_version; |
| 2142 | /* Minor version used for tracking the version of the AUX PCM |
| 2143 | * configuration interface. |
| 2144 | * Supported values: #AFE_API_VERSION_PCM_CONFIG |
| 2145 | */ |
| 2146 | |
| 2147 | u16 aux_mode; |
| 2148 | /* PCM synchronization setting. |
| 2149 | * Supported values: |
| 2150 | * - #AFE_PORT_PCM_AUX_MODE_PCM |
| 2151 | * - #AFE_PORT_PCM_AUX_MODE_AUX |
| 2152 | */ |
| 2153 | |
| 2154 | u16 sync_src; |
| 2155 | /* Synchronization source. |
| 2156 | * Supported values: |
| 2157 | * - #AFE_PORT_PCM_SYNC_SRC_EXTERNAL |
| 2158 | * - #AFE_PORT_PCM_SYNC_SRC_INTERNAL |
| 2159 | */ |
| 2160 | |
| 2161 | u16 frame_setting; |
| 2162 | /* Number of bits per frame. |
| 2163 | * Supported values: |
| 2164 | * - #AFE_PORT_PCM_BITS_PER_FRAME_8 |
| 2165 | * - #AFE_PORT_PCM_BITS_PER_FRAME_16 |
| 2166 | * - #AFE_PORT_PCM_BITS_PER_FRAME_32 |
| 2167 | * - #AFE_PORT_PCM_BITS_PER_FRAME_64 |
| 2168 | * - #AFE_PORT_PCM_BITS_PER_FRAME_128 |
| 2169 | * - #AFE_PORT_PCM_BITS_PER_FRAME_256 |
| 2170 | */ |
| 2171 | |
| 2172 | u16 quantype; |
| 2173 | /* PCM quantization type. |
| 2174 | * Supported values: |
| 2175 | * - #AFE_PORT_PCM_ALAW_NOPADDING |
| 2176 | * - #AFE_PORT_PCM_MULAW_NOPADDING |
| 2177 | * - #AFE_PORT_PCM_LINEAR_NOPADDING |
| 2178 | * - #AFE_PORT_PCM_ALAW_PADDING |
| 2179 | * - #AFE_PORT_PCM_MULAW_PADDING |
| 2180 | * - #AFE_PORT_PCM_LINEAR_PADDING |
| 2181 | */ |
| 2182 | |
| 2183 | u16 ctrl_data_out_enable; |
| 2184 | /* Specifies whether the PCM block shares the data-out |
| 2185 | * signal to the drive with other masters. |
| 2186 | * Supported values: |
| 2187 | * - #AFE_PORT_PCM_CTRL_DATA_OE_DISABLE |
| 2188 | * - #AFE_PORT_PCM_CTRL_DATA_OE_ENABLE |
| 2189 | */ |
| 2190 | u16 reserved; |
| 2191 | /* This field must be set to zero. */ |
| 2192 | |
| 2193 | u32 sample_rate; |
| 2194 | /* Sampling rate of the port. |
| 2195 | * Supported values: |
| 2196 | * - #AFE_PORT_SAMPLE_RATE_8K |
| 2197 | * - #AFE_PORT_SAMPLE_RATE_16K |
| 2198 | */ |
| 2199 | |
| 2200 | u16 bit_width; |
| 2201 | /* Bit width of the sample. |
| 2202 | * Supported values: 16 |
| 2203 | */ |
| 2204 | |
| 2205 | u16 num_channels; |
| 2206 | /* Number of channels. |
| 2207 | * Supported values: 1 to 4 |
| 2208 | */ |
| 2209 | |
| 2210 | u16 slot_number_mapping[4]; |
| 2211 | /* Specifies the slot number for the each channel in |
| 2212 | * multi channel scenario. |
| 2213 | * Supported values: 1 to 32 |
| 2214 | */ |
| 2215 | } __packed; |
| 2216 | |
| 2217 | /* |
| 2218 | * This param id is used to configure DIGI MIC interface |
| 2219 | */ |
| 2220 | #define AFE_PARAM_ID_DIGI_MIC_CONFIG 0x0001020F |
| 2221 | /* This version information is used to handle the new |
| 2222 | * additions to the config interface in future in backward |
| 2223 | * compatible manner. |
| 2224 | */ |
| 2225 | #define AFE_API_VERSION_DIGI_MIC_CONFIG 0x1 |
| 2226 | |
| 2227 | /* Enumeration for setting the digital mic configuration |
| 2228 | * channel_mode parameter to left 0. |
| 2229 | */ |
| 2230 | |
| 2231 | #define AFE_PORT_DIGI_MIC_MODE_LEFT0 0x1 |
| 2232 | |
| 2233 | /*Enumeration for setting the digital mic configuration |
| 2234 | * channel_mode parameter to right 0. |
| 2235 | */ |
| 2236 | |
| 2237 | |
| 2238 | #define AFE_PORT_DIGI_MIC_MODE_RIGHT0 0x2 |
| 2239 | |
| 2240 | /* Enumeration for setting the digital mic configuration |
| 2241 | * channel_mode parameter to left 1. |
| 2242 | */ |
| 2243 | |
| 2244 | #define AFE_PORT_DIGI_MIC_MODE_LEFT1 0x3 |
| 2245 | |
| 2246 | /* Enumeration for setting the digital mic configuration |
| 2247 | * channel_mode parameter to right 1. |
| 2248 | */ |
| 2249 | |
| 2250 | #define AFE_PORT_DIGI_MIC_MODE_RIGHT1 0x4 |
| 2251 | |
| 2252 | /* Enumeration for setting the digital mic configuration |
| 2253 | * channel_mode parameter to stereo 0. |
| 2254 | */ |
| 2255 | #define AFE_PORT_DIGI_MIC_MODE_STEREO0 0x5 |
| 2256 | |
| 2257 | /* Enumeration for setting the digital mic configuration |
| 2258 | * channel_mode parameter to stereo 1. |
| 2259 | */ |
| 2260 | |
| 2261 | |
| 2262 | #define AFE_PORT_DIGI_MIC_MODE_STEREO1 0x6 |
| 2263 | |
| 2264 | /* Enumeration for setting the digital mic configuration |
| 2265 | * channel_mode parameter to quad. |
| 2266 | */ |
| 2267 | |
| 2268 | #define AFE_PORT_DIGI_MIC_MODE_QUAD 0x7 |
| 2269 | |
| 2270 | /* Payload of the #AFE_PARAM_ID_DIGI_MIC_CONFIG command's |
| 2271 | * (DIGI MIC configuration |
| 2272 | * parameter). |
| 2273 | */ |
| 2274 | struct afe_param_id_digi_mic_cfg { |
| 2275 | u32 digi_mic_cfg_minor_version; |
| 2276 | /* Minor version used for tracking the version of the DIGI Mic |
| 2277 | * configuration interface. |
| 2278 | * Supported values: #AFE_API_VERSION_DIGI_MIC_CONFIG |
| 2279 | */ |
| 2280 | |
| 2281 | u16 bit_width; |
| 2282 | /* Bit width of the sample. |
| 2283 | * Supported values: 16 |
| 2284 | */ |
| 2285 | |
| 2286 | u16 channel_mode; |
| 2287 | /* Digital mic and multichannel operation. |
| 2288 | * Supported values: |
| 2289 | * - #AFE_PORT_DIGI_MIC_MODE_LEFT0 |
| 2290 | * - #AFE_PORT_DIGI_MIC_MODE_RIGHT0 |
| 2291 | * - #AFE_PORT_DIGI_MIC_MODE_LEFT1 |
| 2292 | * - #AFE_PORT_DIGI_MIC_MODE_RIGHT1 |
| 2293 | * - #AFE_PORT_DIGI_MIC_MODE_STEREO0 |
| 2294 | * - #AFE_PORT_DIGI_MIC_MODE_STEREO1 |
| 2295 | * - #AFE_PORT_DIGI_MIC_MODE_QUAD |
| 2296 | */ |
| 2297 | |
| 2298 | u32 sample_rate; |
| 2299 | /* Sampling rate of the port. |
| 2300 | * Supported values: |
| 2301 | * - #AFE_PORT_SAMPLE_RATE_8K |
| 2302 | * - #AFE_PORT_SAMPLE_RATE_16K |
| 2303 | * - #AFE_PORT_SAMPLE_RATE_48K |
| 2304 | */ |
| 2305 | } __packed; |
| 2306 | |
| 2307 | /* This param id is used to configure HDMI interface */ |
| 2308 | #define AFE_PARAM_ID_HDMI_CONFIG 0x00010210 |
| 2309 | |
| 2310 | /* This version information is used to handle the new |
| 2311 | * additions to the config interface in future in backward |
| 2312 | * compatible manner. |
| 2313 | */ |
| 2314 | #define AFE_API_VERSION_HDMI_CONFIG 0x1 |
| 2315 | |
| 2316 | /* Payload of the #AFE_PARAM_ID_HDMI_CONFIG command, |
| 2317 | * which configures a multichannel HDMI audio interface. |
| 2318 | */ |
| 2319 | struct afe_param_id_hdmi_multi_chan_audio_cfg { |
| 2320 | u32 hdmi_cfg_minor_version; |
| 2321 | /* Minor version used for tracking the version of the HDMI |
| 2322 | * configuration interface. |
| 2323 | * Supported values: #AFE_API_VERSION_HDMI_CONFIG |
| 2324 | */ |
| 2325 | |
| 2326 | u16 datatype; |
| 2327 | /* data type |
| 2328 | * Supported values: |
| 2329 | * - #LINEAR_PCM_DATA |
| 2330 | * - #NON_LINEAR_DATA |
| 2331 | * - #LINEAR_PCM_DATA_PACKED_IN_60958 |
| 2332 | * - #NON_LINEAR_DATA_PACKED_IN_60958 |
| 2333 | */ |
| 2334 | |
| 2335 | u16 channel_allocation; |
| 2336 | /* HDMI channel allocation information for programming an HDMI |
| 2337 | * frame. The default is 0 (Stereo). |
| 2338 | * |
| 2339 | * This information is defined in the HDMI standard, CEA 861-D |
| 2340 | * (refer to @xhyperref{S1,[S1]}). The number of channels is also |
| 2341 | * inferred from this parameter. |
| 2342 | */ |
| 2343 | |
| 2344 | |
| 2345 | u32 sample_rate; |
| 2346 | /* Sampling rate of the port. |
| 2347 | * Supported values: |
| 2348 | * - #AFE_PORT_SAMPLE_RATE_8K |
| 2349 | * - #AFE_PORT_SAMPLE_RATE_16K |
| 2350 | * - #AFE_PORT_SAMPLE_RATE_48K |
| 2351 | * - #AFE_PORT_SAMPLE_RATE_96K |
| 2352 | * - 22050, 44100, 176400 for compressed streams |
| 2353 | */ |
| 2354 | |
| 2355 | u16 bit_width; |
| 2356 | /* Bit width of the sample. |
| 2357 | * Supported values: 16, 24 |
| 2358 | */ |
| 2359 | u16 reserved; |
| 2360 | /* This field must be set to zero. */ |
| 2361 | } __packed; |
| 2362 | |
| 2363 | /* This param id is used to configure BT or FM(RIVA) interface */ |
| 2364 | #define AFE_PARAM_ID_INTERNAL_BT_FM_CONFIG 0x00010211 |
| 2365 | |
| 2366 | /* This version information is used to handle the new |
| 2367 | * additions to the config interface in future in backward |
| 2368 | * compatible manner. |
| 2369 | */ |
| 2370 | #define AFE_API_VERSION_INTERNAL_BT_FM_CONFIG 0x1 |
| 2371 | |
| 2372 | /* Payload of the #AFE_PARAM_ID_INTERNAL_BT_FM_CONFIG |
| 2373 | * command's BT voice/BT audio/FM configuration parameter. |
| 2374 | */ |
| 2375 | struct afe_param_id_internal_bt_fm_cfg { |
| 2376 | u32 bt_fm_cfg_minor_version; |
| 2377 | /* Minor version used for tracking the version of the BT and FM |
| 2378 | * configuration interface. |
| 2379 | * Supported values: #AFE_API_VERSION_INTERNAL_BT_FM_CONFIG |
| 2380 | */ |
| 2381 | |
| 2382 | u16 num_channels; |
| 2383 | /* Number of channels. |
| 2384 | * Supported values: 1 to 2 |
| 2385 | */ |
| 2386 | |
| 2387 | u16 bit_width; |
| 2388 | /* Bit width of the sample. |
| 2389 | * Supported values: 16 |
| 2390 | */ |
| 2391 | |
| 2392 | u32 sample_rate; |
| 2393 | /* Sampling rate of the port. |
| 2394 | * Supported values: |
| 2395 | * - #AFE_PORT_SAMPLE_RATE_8K (only for BTSCO) |
| 2396 | * - #AFE_PORT_SAMPLE_RATE_16K (only for BTSCO) |
| 2397 | * - #AFE_PORT_SAMPLE_RATE_48K (FM and A2DP) |
| 2398 | */ |
| 2399 | } __packed; |
| 2400 | |
| 2401 | /* This param id is used to configure SLIMBUS interface using |
| 2402 | * shared channel approach. |
| 2403 | */ |
| 2404 | |
| 2405 | |
| 2406 | #define AFE_PARAM_ID_SLIMBUS_CONFIG 0x00010212 |
| 2407 | |
| 2408 | /* This version information is used to handle the new |
| 2409 | * additions to the config interface in future in backward |
| 2410 | * compatible manner. |
| 2411 | */ |
| 2412 | #define AFE_API_VERSION_SLIMBUS_CONFIG 0x1 |
| 2413 | |
| 2414 | /* Enumeration for setting SLIMbus device ID 1. */ |
| 2415 | #define AFE_SLIMBUS_DEVICE_1 0x0 |
| 2416 | |
| 2417 | /* Enumeration for setting SLIMbus device ID 2. */ |
| 2418 | #define AFE_SLIMBUS_DEVICE_2 0x1 |
| 2419 | |
| 2420 | /* Enumeration for setting the SLIMbus data formats. */ |
| 2421 | #define AFE_SB_DATA_FORMAT_NOT_INDICATED 0x0 |
| 2422 | |
| 2423 | /* Enumeration for setting the maximum number of streams per |
| 2424 | * device. |
| 2425 | */ |
| 2426 | |
| 2427 | #define AFE_PORT_MAX_AUDIO_CHAN_CNT 0x8 |
| 2428 | |
| 2429 | /* Payload of the #AFE_PORT_CMD_SLIMBUS_CONFIG command's SLIMbus |
| 2430 | * port configuration parameter. |
| 2431 | */ |
| 2432 | |
| 2433 | struct afe_param_id_slimbus_cfg { |
| 2434 | u32 sb_cfg_minor_version; |
| 2435 | /* Minor version used for tracking the version of the SLIMBUS |
| 2436 | * configuration interface. |
| 2437 | * Supported values: #AFE_API_VERSION_SLIMBUS_CONFIG |
| 2438 | */ |
| 2439 | |
| 2440 | u16 slimbus_dev_id; |
| 2441 | /* SLIMbus hardware device ID, which is required to handle |
| 2442 | * multiple SLIMbus hardware blocks. |
| 2443 | * Supported values: - #AFE_SLIMBUS_DEVICE_1 - #AFE_SLIMBUS_DEVICE_2 |
| 2444 | */ |
| 2445 | |
| 2446 | |
| 2447 | u16 bit_width; |
| 2448 | /* Bit width of the sample. |
| 2449 | * Supported values: 16, 24 |
| 2450 | */ |
| 2451 | |
| 2452 | u16 data_format; |
| 2453 | /* Data format supported by the SLIMbus hardware. The default is |
| 2454 | * 0 (#AFE_SB_DATA_FORMAT_NOT_INDICATED), which indicates the |
| 2455 | * hardware does not perform any format conversions before the data |
| 2456 | * transfer. |
| 2457 | */ |
| 2458 | |
| 2459 | |
| 2460 | u16 num_channels; |
| 2461 | /* Number of channels. |
| 2462 | * Supported values: 1 to #AFE_PORT_MAX_AUDIO_CHAN_CNT |
| 2463 | */ |
| 2464 | |
| 2465 | u8 shared_ch_mapping[AFE_PORT_MAX_AUDIO_CHAN_CNT]; |
| 2466 | /* Mapping of shared channel IDs (128 to 255) to which the |
| 2467 | * master port is to be connected. |
| 2468 | * Shared_channel_mapping[i] represents the shared channel assigned |
| 2469 | * for audio channel i in multichannel audio data. |
| 2470 | */ |
| 2471 | |
| 2472 | u32 sample_rate; |
| 2473 | /* Sampling rate of the port. |
| 2474 | * Supported values: |
| 2475 | * - #AFE_PORT_SAMPLE_RATE_8K |
| 2476 | * - #AFE_PORT_SAMPLE_RATE_16K |
| 2477 | * - #AFE_PORT_SAMPLE_RATE_48K |
| 2478 | * - #AFE_PORT_SAMPLE_RATE_96K |
| 2479 | * - #AFE_PORT_SAMPLE_RATE_192K |
| 2480 | */ |
| 2481 | } __packed; |
| 2482 | |
| 2483 | |
| 2484 | /* ID of the parameter used by AFE_PARAM_ID_USB_AUDIO_DEV_PARAMS to configure |
| 2485 | * USB audio device parameter. It should be used with |
| 2486 | * AFE_MODULE_AUDIO_DEV_INTERFACE |
| 2487 | */ |
| 2488 | #define AFE_PARAM_ID_USB_AUDIO_DEV_PARAMS 0x000102A5 |
| 2489 | |
| 2490 | |
| 2491 | /* ID of the parameter used to set the endianness value for the |
| 2492 | * USB audio device. It should be used with |
| 2493 | * AFE_MODULE_AUDIO_DEV_INTERFACE |
| 2494 | */ |
| 2495 | #define AFE_PARAM_ID_USB_AUDIO_DEV_LPCM_FMT 0x000102AA |
| 2496 | |
| 2497 | /* Minor version used for tracking USB audio configuration */ |
| 2498 | #define AFE_API_MINIOR_VERSION_USB_AUDIO_CONFIG 0x1 |
| 2499 | |
| 2500 | /* Payload of the AFE_PARAM_ID_USB_AUDIO_DEV_PARAMS parameter used by |
| 2501 | * AFE_MODULE_AUDIO_DEV_INTERFACE. |
| 2502 | */ |
| 2503 | struct afe_param_id_usb_audio_dev_params { |
| 2504 | /* Minor version used for tracking USB audio device parameter. |
| 2505 | * Supported values: AFE_API_MINIOR_VERSION_USB_AUDIO_CONFIG |
| 2506 | */ |
| 2507 | u32 cfg_minor_version; |
| 2508 | /* Token of actual end USB aduio device */ |
| 2509 | u32 dev_token; |
| 2510 | } __packed; |
| 2511 | |
| 2512 | struct afe_param_id_usb_audio_dev_lpcm_fmt { |
| 2513 | /* Minor version used for tracking USB audio device parameter. |
| 2514 | * Supported values: AFE_API_MINIOR_VERSION_USB_AUDIO_CONFIG |
| 2515 | */ |
| 2516 | u32 cfg_minor_version; |
| 2517 | /* Endianness of actual end USB audio device */ |
| 2518 | u32 endian; |
| 2519 | } __packed; |
| 2520 | |
| 2521 | /* ID of the parameter used by AFE_PARAM_ID_USB_AUDIO_CONFIG to configure |
| 2522 | * USB audio interface. It should be used with AFE_MODULE_AUDIO_DEV_INTERFACE |
| 2523 | */ |
| 2524 | #define AFE_PARAM_ID_USB_AUDIO_CONFIG 0x000102A4 |
| 2525 | |
| 2526 | /* Payload of the AFE_PARAM_ID_USB_AUDIO_CONFIG parameter used by |
| 2527 | * AFE_MODULE_AUDIO_DEV_INTERFACE. |
| 2528 | */ |
| 2529 | struct afe_param_id_usb_audio_cfg { |
| 2530 | /* Minor version used for tracking USB audio device configuration. |
| 2531 | * Supported values: AFE_API_MINIOR_VERSION_USB_AUDIO_CONFIG |
| 2532 | */ |
| 2533 | u32 cfg_minor_version; |
| 2534 | /* Sampling rate of the port. |
| 2535 | * Supported values: |
| 2536 | * - AFE_PORT_SAMPLE_RATE_8K |
| 2537 | * - AFE_PORT_SAMPLE_RATE_11025 |
| 2538 | * - AFE_PORT_SAMPLE_RATE_12K |
| 2539 | * - AFE_PORT_SAMPLE_RATE_16K |
| 2540 | * - AFE_PORT_SAMPLE_RATE_22050 |
| 2541 | * - AFE_PORT_SAMPLE_RATE_24K |
| 2542 | * - AFE_PORT_SAMPLE_RATE_32K |
| 2543 | * - AFE_PORT_SAMPLE_RATE_44P1K |
| 2544 | * - AFE_PORT_SAMPLE_RATE_48K |
| 2545 | * - AFE_PORT_SAMPLE_RATE_96K |
| 2546 | * - AFE_PORT_SAMPLE_RATE_192K |
| 2547 | */ |
| 2548 | u32 sample_rate; |
| 2549 | /* Bit width of the sample. |
| 2550 | * Supported values: 16, 24 |
| 2551 | */ |
| 2552 | u16 bit_width; |
| 2553 | /* Number of channels. |
| 2554 | * Supported values: 1 and 2 |
| 2555 | */ |
| 2556 | u16 num_channels; |
| 2557 | /* Data format supported by the USB. The supported value is |
| 2558 | * 0 (#AFE_USB_AUDIO_DATA_FORMAT_LINEAR_PCM). |
| 2559 | */ |
| 2560 | u16 data_format; |
| 2561 | /* this field must be 0 */ |
| 2562 | u16 reserved; |
| 2563 | /* device token of actual end USB aduio device */ |
| 2564 | u32 dev_token; |
| 2565 | /* endianness of this interface */ |
| 2566 | u32 endian; |
| 2567 | } __packed; |
| 2568 | |
| 2569 | struct afe_usb_audio_dev_param_command { |
| 2570 | struct apr_hdr hdr; |
| 2571 | struct afe_port_cmd_set_param_v2 param; |
| 2572 | struct afe_port_param_data_v2 pdata; |
| 2573 | union { |
| 2574 | struct afe_param_id_usb_audio_dev_params usb_dev; |
| 2575 | struct afe_param_id_usb_audio_dev_lpcm_fmt lpcm_fmt; |
| 2576 | }; |
| 2577 | } __packed; |
| 2578 | |
| 2579 | /* This param id is used to configure Real Time Proxy interface. */ |
| 2580 | #define AFE_PARAM_ID_RT_PROXY_CONFIG 0x00010213 |
| 2581 | |
| 2582 | /* This version information is used to handle the new |
| 2583 | * additions to the config interface in future in backward |
| 2584 | * compatible manner. |
| 2585 | */ |
| 2586 | #define AFE_API_VERSION_RT_PROXY_CONFIG 0x1 |
| 2587 | |
| 2588 | /* Payload of the #AFE_PARAM_ID_RT_PROXY_CONFIG |
| 2589 | * command (real-time proxy port configuration parameter). |
| 2590 | */ |
| 2591 | struct afe_param_id_rt_proxy_port_cfg { |
| 2592 | u32 rt_proxy_cfg_minor_version; |
| 2593 | /* Minor version used for tracking the version of rt-proxy |
| 2594 | * config interface. |
| 2595 | */ |
| 2596 | |
| 2597 | u16 bit_width; |
| 2598 | /* Bit width of the sample. |
| 2599 | * Supported values: 16 |
| 2600 | */ |
| 2601 | |
| 2602 | u16 interleaved; |
| 2603 | /* Specifies whether the data exchanged between the AFE |
| 2604 | * interface and real-time port is interleaved. |
| 2605 | * Supported values: - 0 -- Non-interleaved (samples from each |
| 2606 | * channel are contiguous in the buffer) - 1 -- Interleaved |
| 2607 | * (corresponding samples from each input channel are interleaved |
| 2608 | * within the buffer) |
| 2609 | */ |
| 2610 | |
| 2611 | |
| 2612 | u16 frame_size; |
| 2613 | /* Size of the frames that are used for PCM exchanges with this |
| 2614 | * port. |
| 2615 | * Supported values: > 0, in bytes |
| 2616 | * For example, 5 ms buffers of 16 bits and 16 kHz stereo samples |
| 2617 | * is 5 ms * 16 samples/ms * 2 bytes/sample * 2 channels = 320 |
| 2618 | * bytes. |
| 2619 | */ |
| 2620 | u16 jitter_allowance; |
| 2621 | /* Configures the amount of jitter that the port will allow. |
| 2622 | * Supported values: > 0 |
| 2623 | * For example, if +/-10 ms of jitter is anticipated in the timing |
| 2624 | * of sending frames to the port, and the configuration is 16 kHz |
| 2625 | * mono with 16-bit samples, this field is 10 ms * 16 samples/ms * 2 |
| 2626 | * bytes/sample = 320. |
| 2627 | */ |
| 2628 | |
| 2629 | u16 low_water_mark; |
| 2630 | /* Low watermark in bytes (including all channels). |
| 2631 | * Supported values: |
| 2632 | * - 0 -- Do not send any low watermark events |
| 2633 | * - > 0 -- Low watermark for triggering an event |
| 2634 | * If the number of bytes in an internal circular buffer is lower |
| 2635 | * than this low_water_mark parameter, a LOW_WATER_MARK event is |
| 2636 | * sent to applications (via the #AFE_EVENT_RT_PROXY_PORT_STATUS |
| 2637 | * event). |
| 2638 | * Use of watermark events is optional for debugging purposes. |
| 2639 | */ |
| 2640 | |
| 2641 | u16 high_water_mark; |
| 2642 | /* High watermark in bytes (including all channels). |
| 2643 | * Supported values: |
| 2644 | * - 0 -- Do not send any high watermark events |
| 2645 | * - > 0 -- High watermark for triggering an event |
| 2646 | * If the number of bytes in an internal circular buffer exceeds |
| 2647 | * TOTAL_CIRC_BUF_SIZE minus high_water_mark, a high watermark event |
| 2648 | * is sent to applications (via the #AFE_EVENT_RT_PROXY_PORT_STATUS |
| 2649 | * event). |
| 2650 | * The use of watermark events is optional and for debugging |
| 2651 | * purposes. |
| 2652 | */ |
| 2653 | |
| 2654 | |
| 2655 | u32 sample_rate; |
| 2656 | /* Sampling rate of the port. |
| 2657 | * Supported values: |
| 2658 | * - #AFE_PORT_SAMPLE_RATE_8K |
| 2659 | * - #AFE_PORT_SAMPLE_RATE_16K |
| 2660 | * - #AFE_PORT_SAMPLE_RATE_48K |
| 2661 | */ |
| 2662 | |
| 2663 | u16 num_channels; |
| 2664 | /* Number of channels. |
| 2665 | * Supported values: 1 to #AFE_PORT_MAX_AUDIO_CHAN_CNT |
| 2666 | */ |
| 2667 | |
| 2668 | u16 reserved; |
| 2669 | /* For 32 bit alignment. */ |
| 2670 | } __packed; |
| 2671 | |
| 2672 | |
| 2673 | /* This param id is used to configure the Pseudoport interface */ |
| 2674 | |
| 2675 | #define AFE_PARAM_ID_PSEUDO_PORT_CONFIG 0x00010219 |
| 2676 | |
| 2677 | /* Version information used to handle future additions to the configuration |
| 2678 | * interface (for backward compatibility). |
| 2679 | */ |
| 2680 | #define AFE_API_VERSION_PSEUDO_PORT_CONFIG 0x1 |
| 2681 | |
| 2682 | /* Enumeration for setting the timing_mode parameter to faster than real |
| 2683 | * time. |
| 2684 | */ |
| 2685 | #define AFE_PSEUDOPORT_TIMING_MODE_FTRT 0x0 |
| 2686 | |
| 2687 | /* Enumeration for setting the timing_mode parameter to real time using |
| 2688 | * timers. |
| 2689 | */ |
| 2690 | #define AFE_PSEUDOPORT_TIMING_MODE_TIMER 0x1 |
| 2691 | |
| 2692 | /* Payload of the AFE_PARAM_ID_PSEUDO_PORT_CONFIG parameter used by |
| 2693 | * AFE_MODULE_AUDIO_DEV_INTERFACE. |
| 2694 | */ |
| 2695 | struct afe_param_id_pseudo_port_cfg { |
| 2696 | u32 pseud_port_cfg_minor_version; |
| 2697 | /* |
| 2698 | * Minor version used for tracking the version of the pseudoport |
| 2699 | * configuration interface. |
| 2700 | */ |
| 2701 | |
| 2702 | u16 bit_width; |
| 2703 | /* Bit width of the sample at values 16, 24 */ |
| 2704 | |
| 2705 | u16 num_channels; |
| 2706 | /* Number of channels at values 1 to 8 */ |
| 2707 | |
| 2708 | u16 data_format; |
| 2709 | /* Non-linear data format supported by the pseudoport (for future use). |
| 2710 | * At values #AFE_LINEAR_PCM_DATA |
| 2711 | */ |
| 2712 | |
| 2713 | u16 timing_mode; |
| 2714 | /* Indicates whether the pseudoport synchronizes to the clock or |
| 2715 | * operates faster than real time. |
| 2716 | * at values |
| 2717 | * - #AFE_PSEUDOPORT_TIMING_MODE_FTRT |
| 2718 | * - #AFE_PSEUDOPORT_TIMING_MODE_TIMER @tablebulletend |
| 2719 | */ |
| 2720 | |
| 2721 | u32 sample_rate; |
| 2722 | /* Sample rate at which the pseudoport will run. |
| 2723 | * at values |
| 2724 | * - #AFE_PORT_SAMPLE_RATE_8K |
| 2725 | * - #AFE_PORT_SAMPLE_RATE_32K |
| 2726 | * - #AFE_PORT_SAMPLE_RATE_48K |
| 2727 | * - #AFE_PORT_SAMPLE_RATE_96K |
| 2728 | * - #AFE_PORT_SAMPLE_RATE_192K @tablebulletend |
| 2729 | */ |
| 2730 | } __packed; |
| 2731 | |
| 2732 | #define AFE_PARAM_ID_TDM_CONFIG 0x0001029D |
| 2733 | |
| 2734 | #define AFE_API_VERSION_TDM_CONFIG 1 |
| 2735 | |
| 2736 | #define AFE_PORT_TDM_SHORT_SYNC_BIT_MODE 0 |
| 2737 | #define AFE_PORT_TDM_LONG_SYNC_MODE 1 |
| 2738 | #define AFE_PORT_TDM_SHORT_SYNC_SLOT_MODE 2 |
| 2739 | |
| 2740 | #define AFE_PORT_TDM_SYNC_SRC_EXTERNAL 0 |
| 2741 | #define AFE_PORT_TDM_SYNC_SRC_INTERNAL 1 |
| 2742 | |
| 2743 | #define AFE_PORT_TDM_CTRL_DATA_OE_DISABLE 0 |
| 2744 | #define AFE_PORT_TDM_CTRL_DATA_OE_ENABLE 1 |
| 2745 | |
| 2746 | #define AFE_PORT_TDM_SYNC_NORMAL 0 |
| 2747 | #define AFE_PORT_TDM_SYNC_INVERT 1 |
| 2748 | |
| 2749 | #define AFE_PORT_TDM_DATA_DELAY_0_BCLK_CYCLE 0 |
| 2750 | #define AFE_PORT_TDM_DATA_DELAY_1_BCLK_CYCLE 1 |
| 2751 | #define AFE_PORT_TDM_DATA_DELAY_2_BCLK_CYCLE 2 |
| 2752 | |
| 2753 | /* Payload of the AFE_PARAM_ID_TDM_CONFIG parameter used by |
| 2754 | * AFE_MODULE_AUDIO_DEV_INTERFACE. |
| 2755 | */ |
| 2756 | struct afe_param_id_tdm_cfg { |
| 2757 | u32 tdm_cfg_minor_version; |
| 2758 | /* < Minor version used to track TDM configuration. |
| 2759 | * @values #AFE_API_VERSION_TDM_CONFIG |
| 2760 | */ |
| 2761 | |
| 2762 | u32 num_channels; |
| 2763 | /* < Number of enabled slots for TDM frame. |
| 2764 | * @values 1 to 8 |
| 2765 | */ |
| 2766 | |
| 2767 | u32 sample_rate; |
| 2768 | /* < Sampling rate of the port. |
| 2769 | * @values |
| 2770 | * - #AFE_PORT_SAMPLE_RATE_8K |
| 2771 | * - #AFE_PORT_SAMPLE_RATE_16K |
| 2772 | * - #AFE_PORT_SAMPLE_RATE_24K |
| 2773 | * - #AFE_PORT_SAMPLE_RATE_32K |
| 2774 | * - #AFE_PORT_SAMPLE_RATE_48K |
| 2775 | * - #AFE_PORT_SAMPLE_RATE_176P4K |
| 2776 | * - #AFE_PORT_SAMPLE_RATE_352P8K @tablebulletend |
| 2777 | */ |
| 2778 | |
| 2779 | u32 bit_width; |
| 2780 | /* < Bit width of the sample. |
| 2781 | * @values 16, 24 |
| 2782 | */ |
| 2783 | |
| 2784 | u16 data_format; |
| 2785 | /* < Data format: linear ,compressed, generic compresssed |
| 2786 | * @values |
| 2787 | * - #AFE_LINEAR_PCM_DATA |
| 2788 | * - #AFE_NON_LINEAR_DATA |
| 2789 | * - #AFE_GENERIC_COMPRESSED |
| 2790 | */ |
| 2791 | |
| 2792 | u16 sync_mode; |
| 2793 | /* < TDM synchronization setting. |
| 2794 | * @values (short, long, slot) sync mode |
| 2795 | * - #AFE_PORT_TDM_SHORT_SYNC_BIT_MODE |
| 2796 | * - #AFE_PORT_TDM_LONG_SYNC_MODE |
| 2797 | * - #AFE_PORT_TDM_SHORT_SYNC_SLOT_MODE @tablebulletend |
| 2798 | */ |
| 2799 | |
| 2800 | u16 sync_src; |
| 2801 | /* < Synchronization source. |
| 2802 | * @values |
| 2803 | * - #AFE_PORT_TDM_SYNC_SRC_EXTERNAL |
| 2804 | * - #AFE_PORT_TDM_SYNC_SRC_INTERNAL @tablebulletend |
| 2805 | */ |
| 2806 | |
| 2807 | u16 nslots_per_frame; |
| 2808 | /* < Number of slots per frame. Typical : 1, 2, 4, 8, 16, 32. |
| 2809 | * @values 1 - 32 |
| 2810 | */ |
| 2811 | |
| 2812 | u16 ctrl_data_out_enable; |
| 2813 | /* < Specifies whether the TDM block shares the data-out signal to the |
| 2814 | * drive with other masters. |
| 2815 | * @values |
| 2816 | * - #AFE_PORT_TDM_CTRL_DATA_OE_DISABLE |
| 2817 | * - #AFE_PORT_TDM_CTRL_DATA_OE_ENABLE @tablebulletend |
| 2818 | */ |
| 2819 | |
| 2820 | u16 ctrl_invert_sync_pulse; |
| 2821 | /* < Specifies whether to invert the sync or not. |
| 2822 | * @values |
| 2823 | * - #AFE_PORT_TDM_SYNC_NORMAL |
| 2824 | * - #AFE_PORT_TDM_SYNC_INVERT @tablebulletend |
| 2825 | */ |
| 2826 | |
| 2827 | u16 ctrl_sync_data_delay; |
| 2828 | /* < Specifies the number of bit clock to delay data with respect to |
| 2829 | * sync edge. |
| 2830 | * @values |
| 2831 | * - #AFE_PORT_TDM_DATA_DELAY_0_BCLK_CYCLE |
| 2832 | * - #AFE_PORT_TDM_DATA_DELAY_1_BCLK_CYCLE |
| 2833 | * - #AFE_PORT_TDM_DATA_DELAY_2_BCLK_CYCLE @tablebulletend |
| 2834 | */ |
| 2835 | |
| 2836 | u16 slot_width; |
| 2837 | /* < Slot width of the slot in a TDM frame. (slot_width >= bit_width) |
| 2838 | * have to be satisfied. |
| 2839 | * @values 16, 24, 32 |
| 2840 | */ |
| 2841 | |
| 2842 | u32 slot_mask; |
| 2843 | /* < Position of active slots. When that bit is set, |
| 2844 | * that paricular slot is active. |
| 2845 | * Number of active slots can be inferred by number of |
| 2846 | * bits set in the mask. Only 8 individual bits can be enabled. |
| 2847 | * Bits 0..31 corresponding to slot 0..31 |
| 2848 | * @values 1 to 2^32 - 1 |
| 2849 | */ |
| 2850 | } __packed; |
| 2851 | |
| 2852 | /* ID of Time Divsion Multiplexing (TDM) module, |
| 2853 | * which is used for configuring the AFE TDM. |
| 2854 | * |
| 2855 | * This module supports following parameter IDs: |
| 2856 | * - #AFE_PORT_TDM_SLOT_CONFIG |
| 2857 | * |
| 2858 | * To configure the TDM interface, the client must use the |
| 2859 | * #AFE_PORT_CMD_SET_PARAM command, and fill the module ID with the |
| 2860 | * respective parameter IDs as listed above. |
| 2861 | */ |
| 2862 | |
| 2863 | #define AFE_MODULE_TDM 0x0001028A |
| 2864 | |
| 2865 | /* ID of the parameter used by #AFE_MODULE_TDM to configure |
| 2866 | * the TDM slot mapping. #AFE_PORT_CMD_SET_PARAM can use this parameter ID. |
| 2867 | */ |
| 2868 | #define AFE_PARAM_ID_PORT_SLOT_MAPPING_CONFIG 0x00010297 |
| 2869 | |
| 2870 | /* Version information used to handle future additions to slot mapping |
| 2871 | * configuration (for backward compatibility). |
| 2872 | */ |
| 2873 | #define AFE_API_VERSION_SLOT_MAPPING_CONFIG 0x1 |
| 2874 | |
| 2875 | /* Data align type */ |
| 2876 | #define AFE_SLOT_MAPPING_DATA_ALIGN_MSB 0 |
| 2877 | #define AFE_SLOT_MAPPING_DATA_ALIGN_LSB 1 |
| 2878 | |
| 2879 | #define AFE_SLOT_MAPPING_OFFSET_INVALID 0xFFFF |
| 2880 | |
| 2881 | /* Payload of the AFE_PARAM_ID_PORT_SLOT_MAPPING_CONFIG |
| 2882 | * command's TDM configuration parameter. |
| 2883 | */ |
| 2884 | struct afe_param_id_slot_mapping_cfg { |
| 2885 | u32 minor_version; |
| 2886 | /* < Minor version used for tracking TDM slot configuration. |
| 2887 | * @values #AFE_API_VERSION_TDM_SLOT_CONFIG |
| 2888 | */ |
| 2889 | |
| 2890 | u16 num_channel; |
| 2891 | /* < number of channel of the audio sample. |
| 2892 | * @values 1, 2, 4, 6, 8 @tablebulletend |
| 2893 | */ |
| 2894 | |
| 2895 | u16 bitwidth; |
| 2896 | /* < Slot bit width for each channel |
| 2897 | * @values 16, 24, 32 |
| 2898 | */ |
| 2899 | |
| 2900 | u32 data_align_type; |
| 2901 | /* < indicate how data packed from slot_offset for 32 slot bit width |
| 2902 | * in case of sample bit width is 24. |
| 2903 | * @values |
| 2904 | * #AFE_SLOT_MAPPING_DATA_ALIGN_MSB |
| 2905 | * #AFE_SLOT_MAPPING_DATA_ALIGN_LSB |
| 2906 | */ |
| 2907 | |
| 2908 | u16 offset[AFE_PORT_MAX_AUDIO_CHAN_CNT]; |
| 2909 | /* < Array of the slot mapping start offset in bytes for this frame. |
| 2910 | * The bytes is counted from 0. The 0 is mapped to the 1st byte |
| 2911 | * in or out of the digital serial data line this sub-frame belong to. |
| 2912 | * slot_offset[] setting is per-channel based. |
| 2913 | * The max num of channel supported is 8. |
| 2914 | * The valid offset value must always be continuly placed in from |
| 2915 | * index 0. |
| 2916 | * Set offset as AFE_SLOT_MAPPING_OFFSET_INVALID for not used arrays. |
| 2917 | * If "slot_bitwidth_per_channel" is 32 and "sample_bitwidth" is 24, |
| 2918 | * "data_align_type" is used to indicate how 24 bit sample data in |
| 2919 | * aligning with 32 bit slot width per-channel. |
| 2920 | * @values, in byte |
| 2921 | */ |
| 2922 | } __packed; |
| 2923 | |
| 2924 | /* ID of the parameter used by #AFE_MODULE_TDM to configure |
| 2925 | * the customer TDM header. #AFE_PORT_CMD_SET_PARAM can use this parameter ID. |
| 2926 | */ |
| 2927 | #define AFE_PARAM_ID_CUSTOM_TDM_HEADER_CONFIG 0x00010298 |
| 2928 | |
| 2929 | /* Version information used to handle future additions to custom TDM header |
| 2930 | * configuration (for backward compatibility). |
| 2931 | */ |
| 2932 | #define AFE_API_VERSION_CUSTOM_TDM_HEADER_CONFIG 0x1 |
| 2933 | |
| 2934 | #define AFE_CUSTOM_TDM_HEADER_TYPE_INVALID 0x0 |
| 2935 | #define AFE_CUSTOM_TDM_HEADER_TYPE_DEFAULT 0x1 |
| 2936 | #define AFE_CUSTOM_TDM_HEADER_TYPE_ENTERTAINMENT_MOST 0x2 |
| 2937 | |
| 2938 | #define AFE_CUSTOM_TDM_HEADER_MAX_CNT 0x8 |
| 2939 | |
| 2940 | /* Payload of the AFE_PARAM_ID_CUSTOM_TDM_HEADER_CONFIG parameter ID */ |
| 2941 | struct afe_param_id_custom_tdm_header_cfg { |
| 2942 | u32 minor_version; |
| 2943 | /* < Minor version used for tracking custom TDM header configuration. |
| 2944 | * @values #AFE_API_VERSION_CUSTOM_TDM_HEADER_CONFIG |
| 2945 | */ |
| 2946 | |
| 2947 | u16 start_offset; |
| 2948 | /* < the slot mapping start offset in bytes from this sub-frame |
| 2949 | * The bytes is counted from 0. The 0 is mapped to the 1st byte in or |
| 2950 | * out of the digital serial data line this sub-frame belong to. |
| 2951 | * @values, in byte, |
| 2952 | * supported values are 0, 4, 8 |
| 2953 | */ |
| 2954 | |
| 2955 | u16 header_width; |
| 2956 | /* < the header width per-frame followed. |
| 2957 | * 2 bytes for MOST/TDM case |
| 2958 | * @values, in byte |
| 2959 | * supported value is 2 |
| 2960 | */ |
| 2961 | |
| 2962 | u16 header_type; |
| 2963 | /* < Indicate what kind of custom TDM header it is. |
| 2964 | * @values #AFE_CUSTOM_TDM_HEADER_TYPE_INVALID = 0 |
| 2965 | * #AFE_CUSTOM_TDM_HEADER_TYPE_DEFAULT = 1 (for AAN channel per MOST) |
| 2966 | * #AFE_CUSTOM_TDM_HEADER_TYPE_ENTERTAINMENT_MOST = 2 |
| 2967 | * (for entertainment channel, which will overwrite |
| 2968 | * AFE_API_VERSION_TDM_SAD_HEADER_TYPE_DEFAULT per MOST) |
| 2969 | */ |
| 2970 | |
| 2971 | u16 num_frame_repeat; |
| 2972 | /* < num of header followed. |
| 2973 | * @values, supported value is 8 |
| 2974 | */ |
| 2975 | u16 header[AFE_CUSTOM_TDM_HEADER_MAX_CNT]; |
| 2976 | /* < SAD header for MOST/TDM case is followed as payload as below. |
| 2977 | * The size of followed SAD header in bytes is num_of_frame_repeat * |
| 2978 | * header_width_per_frame, which is 2 * 8 = 16 bytes here. |
| 2979 | * the supported payload format is in uint16_t as below |
| 2980 | * uint16_t header0; SyncHi 0x3C Info[4] - CodecType -> 0x3C00 |
| 2981 | * uint16_t header1; SyncLo 0xB2 Info[5] - SampleWidth -> 0xB218 |
| 2982 | * uint16_t header2; DTCP Info Info[6] - unused -> 0x0 |
| 2983 | * uint16_t header3; Extension Info[7] - ASAD-Value -> 0xC0 |
| 2984 | * uint16_t header4; Reserved Info[0] - Num of bytes following -> 0x7 |
| 2985 | * uint16_t header5; Reserved Info[1] - Media Type -> 0x0 |
| 2986 | * uint16_t header6; Reserved Info[2] - Bitrate[kbps] - High Byte -> 0x0 |
| 2987 | * uint16_t header7; Reserved Info[3] - Bitrate[kbps] - Low Byte -> 0x0 |
| 2988 | */ |
| 2989 | } __packed; |
| 2990 | |
| 2991 | struct afe_slot_mapping_config_command { |
| 2992 | struct apr_hdr hdr; |
| 2993 | struct afe_port_cmd_set_param_v2 param; |
| 2994 | struct afe_port_param_data_v2 pdata; |
| 2995 | struct afe_param_id_slot_mapping_cfg slot_mapping; |
| 2996 | } __packed; |
| 2997 | |
| 2998 | struct afe_custom_tdm_header_config_command { |
| 2999 | struct apr_hdr hdr; |
| 3000 | struct afe_port_cmd_set_param_v2 param; |
| 3001 | struct afe_port_param_data_v2 pdata; |
| 3002 | struct afe_param_id_custom_tdm_header_cfg custom_tdm_header; |
| 3003 | } __packed; |
| 3004 | |
| 3005 | struct afe_tdm_port_config { |
| 3006 | struct afe_param_id_tdm_cfg tdm; |
| 3007 | struct afe_param_id_slot_mapping_cfg slot_mapping; |
| 3008 | struct afe_param_id_custom_tdm_header_cfg custom_tdm_header; |
| 3009 | } __packed; |
| 3010 | |
| 3011 | #define AFE_PARAM_ID_DEVICE_HW_DELAY 0x00010243 |
| 3012 | #define AFE_API_VERSION_DEVICE_HW_DELAY 0x1 |
| 3013 | |
| 3014 | struct afe_param_id_device_hw_delay_cfg { |
| 3015 | uint32_t device_hw_delay_minor_version; |
| 3016 | uint32_t delay_in_us; |
| 3017 | } __packed; |
| 3018 | |
| 3019 | #define AFE_PARAM_ID_SET_TOPOLOGY 0x0001025A |
| 3020 | #define AFE_API_VERSION_TOPOLOGY_V1 0x1 |
| 3021 | |
| 3022 | struct afe_param_id_set_topology_cfg { |
| 3023 | /* |
| 3024 | * Minor version used for tracking afe topology id configuration. |
| 3025 | * @values #AFE_API_VERSION_TOPOLOGY_V1 |
| 3026 | */ |
| 3027 | u32 minor_version; |
| 3028 | /* |
| 3029 | * Id of the topology for the afe session. |
| 3030 | * @values Any valid AFE topology ID |
| 3031 | */ |
| 3032 | u32 topology_id; |
| 3033 | } __packed; |
| 3034 | |
| 3035 | |
| 3036 | /* |
| 3037 | * Generic encoder module ID. |
| 3038 | * This module supports the following parameter IDs: |
| 3039 | * #AVS_ENCODER_PARAM_ID_ENC_FMT_ID (cannot be set run time) |
| 3040 | * #AVS_ENCODER_PARAM_ID_ENC_CFG_BLK (may be set run time) |
| 3041 | * #AVS_ENCODER_PARAM_ID_ENC_BITRATE (may be set run time) |
| 3042 | * #AVS_ENCODER_PARAM_ID_PACKETIZER_ID (cannot be set run time) |
| 3043 | * Opcode - AVS_MODULE_ID_ENCODER |
| 3044 | * AFE Command AFE_PORT_CMD_SET_PARAM_V2 supports this module ID. |
| 3045 | */ |
| 3046 | #define AFE_MODULE_ID_ENCODER 0x00013229 |
| 3047 | |
| 3048 | /* Macro for defining the packetizer ID: COP. */ |
| 3049 | #define AFE_MODULE_ID_PACKETIZER_COP 0x0001322A |
| 3050 | |
| 3051 | /* |
| 3052 | * Packetizer type parameter for the #AVS_MODULE_ID_ENCODER module. |
| 3053 | * This parameter cannot be set runtime. |
| 3054 | */ |
| 3055 | #define AFE_ENCODER_PARAM_ID_PACKETIZER_ID 0x0001322E |
| 3056 | |
| 3057 | /* |
| 3058 | * Encoder config block parameter for the #AVS_MODULE_ID_ENCODER module. |
| 3059 | * This parameter may be set runtime. |
| 3060 | */ |
| 3061 | #define AFE_ENCODER_PARAM_ID_ENC_CFG_BLK 0x0001322C |
| 3062 | |
| 3063 | /* |
| 3064 | * Encoder format ID parameter for the #AVS_MODULE_ID_ENCODER module. |
| 3065 | * This parameter cannot be set runtime. |
| 3066 | */ |
| 3067 | #define AFE_ENCODER_PARAM_ID_ENC_FMT_ID 0x0001322B |
| 3068 | |
| 3069 | /* |
| 3070 | * Data format to send compressed data |
| 3071 | * is transmitted/received over Slimbus lines. |
| 3072 | */ |
| 3073 | #define AFE_SB_DATA_FORMAT_GENERIC_COMPRESSED 0x3 |
| 3074 | |
| 3075 | /* |
| 3076 | * ID for AFE port module. This will be used to define port properties. |
| 3077 | * This module supports following parameter IDs: |
| 3078 | * #AFE_PARAM_ID_PORT_MEDIA_TYPE |
| 3079 | * To configure the port property, the client must use the |
| 3080 | * #AFE_PORT_CMD_SET_PARAM_V2 command, |
| 3081 | * and fill the module ID with the respective parameter IDs as listed above. |
| 3082 | * @apr_hdr_fields |
| 3083 | * Opcode -- AFE_MODULE_PORT |
| 3084 | */ |
| 3085 | #define AFE_MODULE_PORT 0x000102a6 |
| 3086 | |
| 3087 | /* |
| 3088 | * ID of the parameter used by #AFE_MODULE_PORT to set the port media type. |
| 3089 | * parameter ID is currently supported using#AFE_PORT_CMD_SET_PARAM_V2 command. |
| 3090 | */ |
| 3091 | #define AFE_PARAM_ID_PORT_MEDIA_TYPE 0x000102a7 |
| 3092 | |
| 3093 | /* |
| 3094 | * Macros for defining the "data_format" field in the |
| 3095 | * #AFE_PARAM_ID_PORT_MEDIA_TYPE |
| 3096 | */ |
| 3097 | #define AFE_PORT_DATA_FORMAT_PCM 0x0 |
| 3098 | #define AFE_PORT_DATA_FORMAT_GENERIC_COMPRESSED 0x1 |
| 3099 | |
| 3100 | /* |
| 3101 | * Macro for defining the "minor_version" field in the |
| 3102 | * #AFE_PARAM_ID_PORT_MEDIA_TYPE |
| 3103 | */ |
| 3104 | #define AFE_API_VERSION_PORT_MEDIA_TYPE 0x1 |
| 3105 | |
| 3106 | #define ASM_MEDIA_FMT_NONE 0x0 |
| 3107 | |
| 3108 | /* |
| 3109 | * Media format ID for SBC encode configuration. |
| 3110 | * @par SBC encode configuration (asm_sbc_enc_cfg_t) |
| 3111 | * @table{weak__asm__sbc__enc__cfg__t} |
| 3112 | */ |
| 3113 | #define ASM_MEDIA_FMT_SBC 0x00010BF2 |
| 3114 | |
| 3115 | /* SBC channel Mono mode.*/ |
| 3116 | #define ASM_MEDIA_FMT_SBC_CHANNEL_MODE_MONO 1 |
| 3117 | |
| 3118 | /* SBC channel Stereo mode. */ |
| 3119 | #define ASM_MEDIA_FMT_SBC_CHANNEL_MODE_STEREO 2 |
| 3120 | |
| 3121 | /* SBC channel Dual Mono mode. */ |
| 3122 | #define ASM_MEDIA_FMT_SBC_CHANNEL_MODE_DUAL_MONO 8 |
| 3123 | |
| 3124 | /* SBC channel Joint Stereo mode. */ |
| 3125 | #define ASM_MEDIA_FMT_SBC_CHANNEL_MODE_JOINT_STEREO 9 |
| 3126 | |
| 3127 | /* SBC bit allocation method = loudness. */ |
| 3128 | #define ASM_MEDIA_FMT_SBC_ALLOCATION_METHOD_LOUDNESS 0 |
| 3129 | |
| 3130 | /* SBC bit allocation method = SNR. */ |
| 3131 | #define ASM_MEDIA_FMT_SBC_ALLOCATION_METHOD_SNR 1 |
| 3132 | |
| 3133 | |
| 3134 | /* |
| 3135 | * Payload of the SBC encoder configuration parameters in the |
| 3136 | * #ASM_MEDIA_FMT_SBC media format. |
| 3137 | */ |
| 3138 | struct asm_sbc_enc_cfg_t { |
| 3139 | /* |
| 3140 | * Number of subbands. |
| 3141 | * @values 4, 8 |
| 3142 | */ |
| 3143 | uint32_t num_subbands; |
| 3144 | |
| 3145 | /* |
| 3146 | * Size of the encoded block in samples. |
| 3147 | * @values 4, 8, 12, 16 |
| 3148 | */ |
| 3149 | uint32_t blk_len; |
| 3150 | |
| 3151 | /* |
| 3152 | * Mode used to allocate bits between channels. |
| 3153 | * @values |
| 3154 | * 0 (Native mode) |
| 3155 | * #ASM_MEDIA_FMT_SBC_CHANNEL_MODE_MONO |
| 3156 | * #ASM_MEDIA_FMT_SBC_CHANNEL_MODE_STEREO |
| 3157 | * #ASM_MEDIA_FMT_SBC_CHANNEL_MODE_DUAL_MONO |
| 3158 | * #ASM_MEDIA_FMT_SBC_CHANNEL_MODE_JOINT_STEREO |
| 3159 | * Native mode indicates that encoding must be performed with the number |
| 3160 | * of channels at the input. |
| 3161 | * If postprocessing outputs one-channel data, Mono mode is used. If |
| 3162 | * postprocessing outputs two-channel data, Stereo mode is used. |
| 3163 | * The number of channels must not change during encoding. |
| 3164 | */ |
| 3165 | uint32_t channel_mode; |
| 3166 | |
| 3167 | /* |
| 3168 | * Encoder bit allocation method. |
| 3169 | * @values |
| 3170 | * #ASM_MEDIA_FMT_SBC_ALLOCATION_METHOD_LOUDNESS |
| 3171 | * #ASM_MEDIA_FMT_SBC_ALLOCATION_METHOD_SNR @tablebulletend |
| 3172 | */ |
| 3173 | uint32_t alloc_method; |
| 3174 | |
| 3175 | /* |
| 3176 | * Number of encoded bits per second. |
| 3177 | * @values |
| 3178 | * Mono channel -- Maximum of 320 kbps |
| 3179 | * Stereo channel -- Maximum of 512 kbps @tablebulletend |
| 3180 | */ |
| 3181 | uint32_t bit_rate; |
| 3182 | |
| 3183 | /* |
| 3184 | * Number of samples per second. |
| 3185 | * @values 0 (Native mode), 16000, 32000, 44100, 48000 Hz |
| 3186 | * Native mode indicates that encoding must be performed with the |
| 3187 | * sampling rate at the input. |
| 3188 | * The sampling rate must not change during encoding. |
| 3189 | */ |
| 3190 | uint32_t sample_rate; |
| 3191 | }; |
| 3192 | |
| 3193 | #define ASM_MEDIA_FMT_AAC_AOT_LC 2 |
| 3194 | #define ASM_MEDIA_FMT_AAC_AOT_SBR 5 |
| 3195 | #define ASM_MEDIA_FMT_AAC_AOT_PS 29 |
| 3196 | #define ASM_MEDIA_FMT_AAC_FORMAT_FLAG_ADTS 0 |
| 3197 | #define ASM_MEDIA_FMT_AAC_FORMAT_FLAG_RAW 3 |
| 3198 | |
| 3199 | struct asm_aac_enc_cfg_v2_t { |
| 3200 | |
| 3201 | /* Encoding rate in bits per second.*/ |
| 3202 | uint32_t bit_rate; |
| 3203 | |
| 3204 | /* |
| 3205 | * Encoding mode. |
| 3206 | * Supported values: |
| 3207 | * #ASM_MEDIA_FMT_AAC_AOT_LC |
| 3208 | * #ASM_MEDIA_FMT_AAC_AOT_SBR |
| 3209 | * #ASM_MEDIA_FMT_AAC_AOT_PS |
| 3210 | */ |
| 3211 | uint32_t enc_mode; |
| 3212 | |
| 3213 | /* |
| 3214 | * AAC format flag. |
| 3215 | * Supported values: |
| 3216 | * #ASM_MEDIA_FMT_AAC_FORMAT_FLAG_ADTS |
| 3217 | * #ASM_MEDIA_FMT_AAC_FORMAT_FLAG_RAW |
| 3218 | */ |
| 3219 | uint16_t aac_fmt_flag; |
| 3220 | |
| 3221 | /* |
| 3222 | * Number of channels to encode. |
| 3223 | * Supported values: |
| 3224 | * 0 - Native mode |
| 3225 | * 1 - Mono |
| 3226 | * 2 - Stereo |
| 3227 | * Other values are not supported. |
| 3228 | * @note1hang The eAAC+ encoder mode supports only stereo. |
| 3229 | * Native mode indicates that encoding must be performed with the |
| 3230 | * number of channels at the input. |
| 3231 | * The number of channels must not change during encoding. |
| 3232 | */ |
| 3233 | uint16_t channel_cfg; |
| 3234 | |
| 3235 | /* |
| 3236 | * Number of samples per second. |
| 3237 | * Supported values: - 0 -- Native mode - For other values, |
| 3238 | * Native mode indicates that encoding must be performed with the |
| 3239 | * sampling rate at the input. |
| 3240 | * The sampling rate must not change during encoding. |
| 3241 | */ |
| 3242 | uint32_t sample_rate; |
| 3243 | } __packed; |
| 3244 | |
| 3245 | /* FMT ID for apt-X Classic */ |
| 3246 | #define ASM_MEDIA_FMT_APTX 0x000131ff |
| 3247 | |
| 3248 | /* FMT ID for apt-X HD */ |
| 3249 | #define ASM_MEDIA_FMT_APTX_HD 0x00013200 |
| 3250 | |
| 3251 | #define PCM_CHANNEL_L 1 |
| 3252 | #define PCM_CHANNEL_R 2 |
| 3253 | #define PCM_CHANNEL_C 3 |
| 3254 | |
| 3255 | struct asm_custom_enc_cfg_aptx_t { |
| 3256 | uint32_t sample_rate; |
| 3257 | /* Mono or stereo */ |
| 3258 | uint16_t num_channels; |
| 3259 | uint16_t reserved; |
| 3260 | /* num_ch == 1, then PCM_CHANNEL_C, |
| 3261 | * num_ch == 2, then {PCM_CHANNEL_L, PCM_CHANNEL_R} |
| 3262 | */ |
| 3263 | uint8_t channel_mapping[8]; |
| 3264 | uint32_t custom_size; |
| 3265 | } __packed; |
| 3266 | |
| 3267 | struct afe_enc_fmt_id_param_t { |
| 3268 | /* |
| 3269 | * Supported values: |
| 3270 | * #ASM_MEDIA_FMT_SBC |
| 3271 | * #ASM_MEDIA_FMT_AAC_V2 |
| 3272 | * Any OpenDSP supported values |
| 3273 | */ |
| 3274 | uint32_t fmt_id; |
| 3275 | } __packed; |
| 3276 | |
| 3277 | struct afe_port_media_type_t { |
| 3278 | /* |
| 3279 | * Minor version |
| 3280 | * @values #AFE_API_VERSION_PORT_MEDIA_TYPE. |
| 3281 | */ |
| 3282 | uint32_t minor_version; |
| 3283 | |
| 3284 | /* |
| 3285 | * Sampling rate of the port. |
| 3286 | * @values |
| 3287 | * #AFE_PORT_SAMPLE_RATE_8K |
| 3288 | * #AFE_PORT_SAMPLE_RATE_11_025K |
| 3289 | * #AFE_PORT_SAMPLE_RATE_12K |
| 3290 | * #AFE_PORT_SAMPLE_RATE_16K |
| 3291 | * #AFE_PORT_SAMPLE_RATE_22_05K |
| 3292 | * #AFE_PORT_SAMPLE_RATE_24K |
| 3293 | * #AFE_PORT_SAMPLE_RATE_32K |
| 3294 | * #AFE_PORT_SAMPLE_RATE_44_1K |
| 3295 | * #AFE_PORT_SAMPLE_RATE_48K |
| 3296 | * #AFE_PORT_SAMPLE_RATE_88_2K |
| 3297 | * #AFE_PORT_SAMPLE_RATE_96K |
| 3298 | * #AFE_PORT_SAMPLE_RATE_176_4K |
| 3299 | * #AFE_PORT_SAMPLE_RATE_192K |
| 3300 | * #AFE_PORT_SAMPLE_RATE_352_8K |
| 3301 | * #AFE_PORT_SAMPLE_RATE_384K |
| 3302 | */ |
| 3303 | uint32_t sample_rate; |
| 3304 | |
| 3305 | /* |
| 3306 | * Bit width of the sample. |
| 3307 | * @values 16, 24 |
| 3308 | */ |
| 3309 | uint16_t bit_width; |
| 3310 | |
| 3311 | /* |
| 3312 | * Number of channels. |
| 3313 | * @values 1 to #AFE_PORT_MAX_AUDIO_CHAN_CNT |
| 3314 | */ |
| 3315 | uint16_t num_channels; |
| 3316 | |
| 3317 | /* |
| 3318 | * Data format supported by this port. |
| 3319 | * If the port media type and device media type are different, |
| 3320 | * it signifies a encoding/decoding use case |
| 3321 | * @values |
| 3322 | * #AFE_PORT_DATA_FORMAT_PCM |
| 3323 | * #AFE_PORT_DATA_FORMAT_GENERIC_COMPRESSED |
| 3324 | */ |
| 3325 | uint16_t data_format; |
| 3326 | |
| 3327 | /*This field must be set to zero.*/ |
| 3328 | uint16_t reserved; |
| 3329 | } __packed; |
| 3330 | |
| 3331 | union afe_enc_config_data { |
| 3332 | struct asm_sbc_enc_cfg_t sbc_config; |
| 3333 | struct asm_aac_enc_cfg_v2_t aac_config; |
| 3334 | struct asm_custom_enc_cfg_aptx_t aptx_config; |
| 3335 | }; |
| 3336 | |
| 3337 | struct afe_enc_config { |
| 3338 | u32 format; |
| 3339 | union afe_enc_config_data data; |
| 3340 | }; |
| 3341 | |
| 3342 | struct afe_enc_cfg_blk_param_t { |
| 3343 | uint32_t enc_cfg_blk_size; |
| 3344 | /* |
| 3345 | *Size of the encoder configuration block that follows this member |
| 3346 | */ |
| 3347 | union afe_enc_config_data enc_blk_config; |
| 3348 | }; |
| 3349 | |
| 3350 | /* |
| 3351 | * Payload of the AVS_ENCODER_PARAM_ID_PACKETIZER_ID parameter. |
| 3352 | */ |
| 3353 | struct avs_enc_packetizer_id_param_t { |
| 3354 | /* |
| 3355 | * Supported values: |
| 3356 | * #AVS_MODULE_ID_PACKETIZER_COP |
| 3357 | * Any OpenDSP supported values |
| 3358 | */ |
| 3359 | uint32_t enc_packetizer_id; |
| 3360 | }; |
| 3361 | |
| 3362 | union afe_port_config { |
| 3363 | struct afe_param_id_pcm_cfg pcm; |
| 3364 | struct afe_param_id_i2s_cfg i2s; |
| 3365 | struct afe_param_id_hdmi_multi_chan_audio_cfg hdmi_multi_ch; |
| 3366 | struct afe_param_id_slimbus_cfg slim_sch; |
| 3367 | struct afe_param_id_rt_proxy_port_cfg rtproxy; |
| 3368 | struct afe_param_id_internal_bt_fm_cfg int_bt_fm; |
| 3369 | struct afe_param_id_pseudo_port_cfg pseudo_port; |
| 3370 | struct afe_param_id_device_hw_delay_cfg hw_delay; |
| 3371 | struct afe_param_id_spdif_cfg spdif; |
| 3372 | struct afe_param_id_set_topology_cfg topology; |
| 3373 | struct afe_param_id_tdm_cfg tdm; |
| 3374 | struct afe_param_id_usb_audio_cfg usb_audio; |
| 3375 | struct afe_enc_fmt_id_param_t enc_fmt; |
| 3376 | struct afe_port_media_type_t media_type; |
| 3377 | struct afe_enc_cfg_blk_param_t enc_blk_param; |
| 3378 | struct avs_enc_packetizer_id_param_t enc_pkt_id_param; |
| 3379 | } __packed; |
| 3380 | |
| 3381 | struct afe_audioif_config_command_no_payload { |
| 3382 | struct apr_hdr hdr; |
| 3383 | struct afe_port_cmd_set_param_v2 param; |
| 3384 | } __packed; |
| 3385 | |
| 3386 | struct afe_audioif_config_command { |
| 3387 | struct apr_hdr hdr; |
| 3388 | struct afe_port_cmd_set_param_v2 param; |
| 3389 | struct afe_port_param_data_v2 pdata; |
| 3390 | union afe_port_config port; |
| 3391 | } __packed; |
| 3392 | |
| 3393 | #define AFE_PORT_CMD_DEVICE_START 0x000100E5 |
| 3394 | |
| 3395 | /* Payload of the #AFE_PORT_CMD_DEVICE_START.*/ |
| 3396 | struct afe_port_cmd_device_start { |
| 3397 | struct apr_hdr hdr; |
| 3398 | u16 port_id; |
| 3399 | /* Port interface and direction (Rx or Tx) to start. An even |
| 3400 | * number represents the Rx direction, and an odd number represents |
| 3401 | * the Tx direction. |
| 3402 | */ |
| 3403 | |
| 3404 | |
| 3405 | u16 reserved; |
| 3406 | /* Reserved for 32-bit alignment. This field must be set to 0.*/ |
| 3407 | |
| 3408 | } __packed; |
| 3409 | |
| 3410 | #define AFE_PORT_CMD_DEVICE_STOP 0x000100E6 |
| 3411 | |
| 3412 | /* Payload of the #AFE_PORT_CMD_DEVICE_STOP. */ |
| 3413 | struct afe_port_cmd_device_stop { |
| 3414 | struct apr_hdr hdr; |
| 3415 | u16 port_id; |
| 3416 | /* Port interface and direction (Rx or Tx) to start. An even |
| 3417 | * number represents the Rx direction, and an odd number represents |
| 3418 | * the Tx direction. |
| 3419 | */ |
| 3420 | |
| 3421 | u16 reserved; |
| 3422 | /* Reserved for 32-bit alignment. This field must be set to 0.*/ |
| 3423 | } __packed; |
| 3424 | |
| 3425 | #define AFE_SERVICE_CMD_SHARED_MEM_MAP_REGIONS 0x000100EA |
| 3426 | |
| 3427 | /* Memory map regions command payload used by the |
| 3428 | * #AFE_SERVICE_CMD_SHARED_MEM_MAP_REGIONS . |
| 3429 | * This structure allows clients to map multiple shared memory |
| 3430 | * regions in a single command. Following this structure are |
| 3431 | * num_regions of afe_service_shared_map_region_payload. |
| 3432 | */ |
| 3433 | struct afe_service_cmd_shared_mem_map_regions { |
| 3434 | struct apr_hdr hdr; |
| 3435 | u16 mem_pool_id; |
| 3436 | /* Type of memory on which this memory region is mapped. |
| 3437 | * Supported values: |
| 3438 | * - #ADSP_MEMORY_MAP_EBI_POOL |
| 3439 | * - #ADSP_MEMORY_MAP_SMI_POOL |
| 3440 | * - #ADSP_MEMORY_MAP_SHMEM8_4K_POOL |
| 3441 | * - Other values are reserved |
| 3442 | * |
| 3443 | * The memory pool ID implicitly defines the characteristics of the |
| 3444 | * memory. Characteristics may include alignment type, permissions, |
| 3445 | * etc. |
| 3446 | * |
| 3447 | * ADSP_MEMORY_MAP_EBI_POOL is External Buffer Interface type memory |
| 3448 | * ADSP_MEMORY_MAP_SMI_POOL is Shared Memory Interface type memory |
| 3449 | * ADSP_MEMORY_MAP_SHMEM8_4K_POOL is shared memory, byte |
| 3450 | * addressable, and 4 KB aligned. |
| 3451 | */ |
| 3452 | |
| 3453 | |
| 3454 | u16 num_regions; |
| 3455 | /* Number of regions to map. |
| 3456 | * Supported values: |
| 3457 | * - Any value greater than zero |
| 3458 | */ |
| 3459 | |
| 3460 | u32 property_flag; |
| 3461 | /* Configures one common property for all the regions in the |
| 3462 | * payload. |
| 3463 | * |
| 3464 | * Supported values: - 0x00000000 to 0x00000001 |
| 3465 | * |
| 3466 | * b0 - bit 0 indicates physical or virtual mapping 0 Shared memory |
| 3467 | * address provided in afe_service_shared_map_region_payloadis a |
| 3468 | * physical address. The shared memory needs to be mapped( hardware |
| 3469 | * TLB entry) and a software entry needs to be added for internal |
| 3470 | * book keeping. |
| 3471 | * |
| 3472 | * 1 Shared memory address provided in |
| 3473 | * afe_service_shared_map_region_payloadis a virtual address. The |
| 3474 | * shared memory must not be mapped (since hardware TLB entry is |
| 3475 | * already available) but a software entry needs to be added for |
| 3476 | * internal book keeping. This can be useful if two services with in |
| 3477 | * ADSP is communicating via APR. They can now directly communicate |
| 3478 | * via the Virtual address instead of Physical address. The virtual |
| 3479 | * regions must be contiguous. num_regions must be 1 in this case. |
| 3480 | * |
| 3481 | * b31-b1 - reserved bits. must be set to zero |
| 3482 | */ |
| 3483 | |
| 3484 | |
| 3485 | } __packed; |
| 3486 | /* Map region payload used by the |
| 3487 | * afe_service_shared_map_region_payloadstructure. |
| 3488 | */ |
| 3489 | struct afe_service_shared_map_region_payload { |
| 3490 | u32 shm_addr_lsw; |
| 3491 | /* least significant word of starting address in the memory |
| 3492 | * region to map. It must be contiguous memory, and it must be 4 KB |
| 3493 | * aligned. |
| 3494 | * Supported values: - Any 32 bit value |
| 3495 | */ |
| 3496 | |
| 3497 | |
| 3498 | u32 shm_addr_msw; |
| 3499 | /* most significant word of startng address in the memory region |
| 3500 | * to map. For 32 bit shared memory address, this field must be set |
| 3501 | * to zero. For 36 bit shared memory address, bit31 to bit 4 must be |
| 3502 | * set to zero |
| 3503 | * |
| 3504 | * Supported values: - For 32 bit shared memory address, this field |
| 3505 | * must be set to zero. - For 36 bit shared memory address, bit31 to |
| 3506 | * bit 4 must be set to zero - For 64 bit shared memory address, any |
| 3507 | * 32 bit value |
| 3508 | */ |
| 3509 | |
| 3510 | |
| 3511 | u32 mem_size_bytes; |
| 3512 | /* Number of bytes in the region. The aDSP will always map the |
| 3513 | * regions as virtual contiguous memory, but the memory size must be |
| 3514 | * in multiples of 4 KB to avoid gaps in the virtually contiguous |
| 3515 | * mapped memory. |
| 3516 | * |
| 3517 | * Supported values: - multiples of 4KB |
| 3518 | */ |
| 3519 | |
| 3520 | } __packed; |
| 3521 | |
| 3522 | #define AFE_SERVICE_CMDRSP_SHARED_MEM_MAP_REGIONS 0x000100EB |
| 3523 | struct afe_service_cmdrsp_shared_mem_map_regions { |
| 3524 | u32 mem_map_handle; |
| 3525 | /* A memory map handle encapsulating shared memory attributes is |
| 3526 | * returned iff AFE_SERVICE_CMD_SHARED_MEM_MAP_REGIONS command is |
| 3527 | * successful. In the case of failure , a generic APR error response |
| 3528 | * is returned to the client. |
| 3529 | * |
| 3530 | * Supported Values: - Any 32 bit value |
| 3531 | */ |
| 3532 | |
| 3533 | } __packed; |
| 3534 | #define AFE_SERVICE_CMD_SHARED_MEM_UNMAP_REGIONS 0x000100EC |
| 3535 | /* Memory unmap regions command payload used by the |
| 3536 | * #AFE_SERVICE_CMD_SHARED_MEM_UNMAP_REGIONS |
| 3537 | * |
| 3538 | * This structure allows clients to unmap multiple shared memory |
| 3539 | * regions in a single command. |
| 3540 | */ |
| 3541 | |
| 3542 | |
| 3543 | struct afe_service_cmd_shared_mem_unmap_regions { |
| 3544 | struct apr_hdr hdr; |
| 3545 | u32 mem_map_handle; |
| 3546 | /* memory map handle returned by |
| 3547 | * AFE_SERVICE_CMD_SHARED_MEM_MAP_REGIONS commands |
| 3548 | * |
| 3549 | * Supported Values: |
| 3550 | * - Any 32 bit value |
| 3551 | */ |
| 3552 | } __packed; |
| 3553 | |
| 3554 | #define AFE_PORT_CMD_GET_PARAM_V2 0x000100F0 |
| 3555 | |
| 3556 | /* Payload of the #AFE_PORT_CMD_GET_PARAM_V2 command, |
| 3557 | * which queries for one post/preprocessing parameter of a |
| 3558 | * stream. |
| 3559 | */ |
| 3560 | struct afe_port_cmd_get_param_v2 { |
| 3561 | u16 port_id; |
| 3562 | /* Port interface and direction (Rx or Tx) to start. */ |
| 3563 | |
| 3564 | u16 payload_size; |
| 3565 | /* Maximum data size of the parameter ID/module ID combination. |
| 3566 | * This is a multiple of four bytes |
| 3567 | * Supported values: > 0 |
| 3568 | */ |
| 3569 | |
| 3570 | u32 payload_address_lsw; |
| 3571 | /* LSW of 64 bit Payload address. Address should be 32-byte, |
| 3572 | * 4kbyte aligned and must be contig memory. |
| 3573 | */ |
| 3574 | |
| 3575 | |
| 3576 | u32 payload_address_msw; |
| 3577 | /* MSW of 64 bit Payload address. In case of 32-bit shared |
| 3578 | * memory address, this field must be set to zero. In case of 36-bit |
| 3579 | * shared memory address, bit-4 to bit-31 must be set to zero. |
| 3580 | * Address should be 32-byte, 4kbyte aligned and must be contiguous |
| 3581 | * memory. |
| 3582 | */ |
| 3583 | |
| 3584 | u32 mem_map_handle; |
| 3585 | /* Memory map handle returned by |
| 3586 | * AFE_SERVICE_CMD_SHARED_MEM_MAP_REGIONS commands. |
| 3587 | * Supported Values: - NULL -- Message. The parameter data is |
| 3588 | * in-band. - Non-NULL -- The parameter data is Out-band.Pointer to |
| 3589 | * - the physical address in shared memory of the payload data. |
| 3590 | * For detailed payload content, see the afe_port_param_data_v2 |
| 3591 | * structure |
| 3592 | */ |
| 3593 | |
| 3594 | |
| 3595 | u32 module_id; |
| 3596 | /* ID of the module to be queried. |
| 3597 | * Supported values: Valid module ID |
| 3598 | */ |
| 3599 | |
| 3600 | u32 param_id; |
| 3601 | /* ID of the parameter to be queried. |
| 3602 | * Supported values: Valid parameter ID |
| 3603 | */ |
| 3604 | } __packed; |
| 3605 | |
| 3606 | #define AFE_PORT_CMDRSP_GET_PARAM_V2 0x00010106 |
| 3607 | |
| 3608 | /* Payload of the #AFE_PORT_CMDRSP_GET_PARAM_V2 message, which |
| 3609 | * responds to an #AFE_PORT_CMD_GET_PARAM_V2 command. |
| 3610 | * |
| 3611 | * Immediately following this structure is the parameters structure |
| 3612 | * (afe_port_param_data) containing the response(acknowledgment) |
| 3613 | * parameter payload. This payload is included for an in-band |
| 3614 | * scenario. For an address/shared memory-based set parameter, this |
| 3615 | * payload is not needed. |
| 3616 | */ |
| 3617 | |
| 3618 | |
| 3619 | struct afe_port_cmdrsp_get_param_v2 { |
| 3620 | u32 status; |
| 3621 | } __packed; |
| 3622 | |
| 3623 | #define AFE_PARAM_ID_LPASS_CORE_SHARED_CLOCK_CONFIG 0x0001028C |
| 3624 | #define AFE_API_VERSION_LPASS_CORE_SHARED_CLK_CONFIG 0x1 |
| 3625 | |
| 3626 | /* Payload of the AFE_PARAM_ID_LPASS_CORE_SHARED_CLOCK_CONFIG parameter used by |
| 3627 | * AFE_MODULE_AUDIO_DEV_INTERFACE. |
| 3628 | */ |
| 3629 | struct afe_param_id_lpass_core_shared_clk_cfg { |
| 3630 | u32 lpass_core_shared_clk_cfg_minor_version; |
| 3631 | /* |
| 3632 | * Minor version used for lpass core shared clock configuration |
| 3633 | * Supported value: AFE_API_VERSION_LPASS_CORE_SHARED_CLK_CONFIG |
| 3634 | */ |
| 3635 | u32 enable; |
| 3636 | /* |
| 3637 | * Specifies whether the lpass core shared clock is |
| 3638 | * enabled (1) or disabled (0). |
| 3639 | */ |
| 3640 | } __packed; |
| 3641 | |
| 3642 | struct afe_lpass_core_shared_clk_config_command { |
| 3643 | struct apr_hdr hdr; |
| 3644 | struct afe_port_cmd_set_param_v2 param; |
| 3645 | struct afe_port_param_data_v2 pdata; |
| 3646 | struct afe_param_id_lpass_core_shared_clk_cfg clk_cfg; |
| 3647 | } __packed; |
| 3648 | |
| 3649 | /* adsp_afe_service_commands.h */ |
| 3650 | |
| 3651 | #define ADSP_MEMORY_MAP_EBI_POOL 0 |
| 3652 | |
| 3653 | #define ADSP_MEMORY_MAP_SMI_POOL 1 |
| 3654 | #define ADSP_MEMORY_MAP_IMEM_POOL 2 |
| 3655 | #define ADSP_MEMORY_MAP_SHMEM8_4K_POOL 3 |
| 3656 | |
| 3657 | /* Definition of virtual memory flag */ |
| 3658 | #define ADSP_MEMORY_MAP_VIRTUAL_MEMORY 1 |
| 3659 | |
| 3660 | /* Definition of physical memory flag */ |
| 3661 | #define ADSP_MEMORY_MAP_PHYSICAL_MEMORY 0 |
| 3662 | |
| 3663 | #define NULL_POPP_TOPOLOGY 0x00010C68 |
| 3664 | #define NULL_COPP_TOPOLOGY 0x00010312 |
| 3665 | #define DEFAULT_COPP_TOPOLOGY 0x00010314 |
| 3666 | #define DEFAULT_POPP_TOPOLOGY 0x00010BE4 |
| 3667 | #define COMPRESSED_PASSTHROUGH_DEFAULT_TOPOLOGY 0x0001076B |
| 3668 | #define COMPRESSED_PASSTHROUGH_NONE_TOPOLOGY 0x00010774 |
Laxminath Kasam | 8f7ccc2 | 2017-08-28 17:35:04 +0530 | [diff] [blame] | 3669 | #define VPM_TX_SM_ECNS_V2_COPP_TOPOLOGY 0x00010F89 |
Asish Bhattacharya | 8e2277f | 2017-07-20 18:31:55 +0530 | [diff] [blame] | 3670 | #define VPM_TX_DM_FLUENCE_COPP_TOPOLOGY 0x00010F72 |
| 3671 | #define VPM_TX_QMIC_FLUENCE_COPP_TOPOLOGY 0x00010F75 |
| 3672 | #define VPM_TX_DM_RFECNS_COPP_TOPOLOGY 0x00010F86 |
| 3673 | #define ADM_CMD_COPP_OPEN_TOPOLOGY_ID_DTS_HPX 0x10015002 |
| 3674 | #define ADM_CMD_COPP_OPEN_TOPOLOGY_ID_AUDIOSPHERE 0x10028000 |
| 3675 | |
| 3676 | /* Memory map regions command payload used by the |
| 3677 | * #ASM_CMD_SHARED_MEM_MAP_REGIONS ,#ADM_CMD_SHARED_MEM_MAP_REGIONS |
| 3678 | * commands. |
| 3679 | * |
| 3680 | * This structure allows clients to map multiple shared memory |
| 3681 | * regions in a single command. Following this structure are |
| 3682 | * num_regions of avs_shared_map_region_payload. |
| 3683 | */ |
| 3684 | |
| 3685 | |
| 3686 | struct avs_cmd_shared_mem_map_regions { |
| 3687 | struct apr_hdr hdr; |
| 3688 | u16 mem_pool_id; |
| 3689 | /* Type of memory on which this memory region is mapped. |
| 3690 | * |
| 3691 | * Supported values: - #ADSP_MEMORY_MAP_EBI_POOL - |
| 3692 | * #ADSP_MEMORY_MAP_SMI_POOL - #ADSP_MEMORY_MAP_IMEM_POOL |
| 3693 | * (unsupported) - #ADSP_MEMORY_MAP_SHMEM8_4K_POOL - Other values |
| 3694 | * are reserved |
| 3695 | * |
| 3696 | * The memory ID implicitly defines the characteristics of the |
| 3697 | * memory. Characteristics may include alignment type, permissions, |
| 3698 | * etc. |
| 3699 | * |
| 3700 | * SHMEM8_4K is shared memory, byte addressable, and 4 KB aligned. |
| 3701 | */ |
| 3702 | |
| 3703 | |
| 3704 | u16 num_regions; |
| 3705 | /* Number of regions to map.*/ |
| 3706 | |
| 3707 | u32 property_flag; |
| 3708 | /* Configures one common property for all the regions in the |
| 3709 | * payload. No two regions in the same memory map regions cmd can |
| 3710 | * have differnt property. Supported values: - 0x00000000 to |
| 3711 | * 0x00000001 |
| 3712 | * |
| 3713 | * b0 - bit 0 indicates physical or virtual mapping 0 shared memory |
| 3714 | * address provided in avs_shared_map_regions_payload is physical |
| 3715 | * address. The shared memory needs to be mapped( hardware TLB |
| 3716 | * entry) |
| 3717 | * |
| 3718 | * and a software entry needs to be added for internal book keeping. |
| 3719 | * |
| 3720 | * 1 Shared memory address provided in MayPayload[usRegions] is |
| 3721 | * virtual address. The shared memory must not be mapped (since |
| 3722 | * hardware TLB entry is already available) but a software entry |
| 3723 | * needs to be added for internal book keeping. This can be useful |
| 3724 | * if two services with in ADSP is communicating via APR. They can |
| 3725 | * now directly communicate via the Virtual address instead of |
| 3726 | * Physical address. The virtual regions must be contiguous. |
| 3727 | * |
| 3728 | * b31-b1 - reserved bits. must be set to zero |
| 3729 | */ |
| 3730 | |
| 3731 | } __packed; |
| 3732 | |
| 3733 | struct avs_shared_map_region_payload { |
| 3734 | u32 shm_addr_lsw; |
| 3735 | /* least significant word of shared memory address of the memory |
| 3736 | * region to map. It must be contiguous memory, and it must be 4 KB |
| 3737 | * aligned. |
| 3738 | */ |
| 3739 | |
| 3740 | u32 shm_addr_msw; |
| 3741 | /* most significant word of shared memory address of the memory |
| 3742 | * region to map. For 32 bit shared memory address, this field must |
| 3743 | * tbe set to zero. For 36 bit shared memory address, bit31 to bit 4 |
| 3744 | * must be set to zero |
| 3745 | */ |
| 3746 | |
| 3747 | u32 mem_size_bytes; |
| 3748 | /* Number of bytes in the region. |
| 3749 | * |
| 3750 | * The aDSP will always map the regions as virtual contiguous |
| 3751 | * memory, but the memory size must be in multiples of 4 KB to avoid |
| 3752 | * gaps in the virtually contiguous mapped memory. |
| 3753 | */ |
| 3754 | |
| 3755 | } __packed; |
| 3756 | |
| 3757 | struct avs_cmd_shared_mem_unmap_regions { |
| 3758 | struct apr_hdr hdr; |
| 3759 | u32 mem_map_handle; |
| 3760 | /* memory map handle returned by ASM_CMD_SHARED_MEM_MAP_REGIONS |
| 3761 | * , ADM_CMD_SHARED_MEM_MAP_REGIONS, commands |
| 3762 | */ |
| 3763 | |
| 3764 | } __packed; |
| 3765 | |
| 3766 | /* Memory map command response payload used by the |
| 3767 | * #ASM_CMDRSP_SHARED_MEM_MAP_REGIONS |
| 3768 | * ,#ADM_CMDRSP_SHARED_MEM_MAP_REGIONS |
| 3769 | */ |
| 3770 | |
| 3771 | |
| 3772 | struct avs_cmdrsp_shared_mem_map_regions { |
| 3773 | u32 mem_map_handle; |
| 3774 | /* A memory map handle encapsulating shared memory attributes is |
| 3775 | * returned |
| 3776 | */ |
| 3777 | |
| 3778 | } __packed; |
| 3779 | |
| 3780 | /*adsp_audio_memmap_api.h*/ |
| 3781 | |
| 3782 | /* ASM related data structures */ |
| 3783 | struct asm_wma_cfg { |
| 3784 | u16 format_tag; |
| 3785 | u16 ch_cfg; |
| 3786 | u32 sample_rate; |
| 3787 | u32 avg_bytes_per_sec; |
| 3788 | u16 block_align; |
| 3789 | u16 valid_bits_per_sample; |
| 3790 | u32 ch_mask; |
| 3791 | u16 encode_opt; |
| 3792 | u16 adv_encode_opt; |
| 3793 | u32 adv_encode_opt2; |
| 3794 | u32 drc_peak_ref; |
| 3795 | u32 drc_peak_target; |
| 3796 | u32 drc_ave_ref; |
| 3797 | u32 drc_ave_target; |
| 3798 | } __packed; |
| 3799 | |
| 3800 | struct asm_wmapro_cfg { |
| 3801 | u16 format_tag; |
| 3802 | u16 ch_cfg; |
| 3803 | u32 sample_rate; |
| 3804 | u32 avg_bytes_per_sec; |
| 3805 | u16 block_align; |
| 3806 | u16 valid_bits_per_sample; |
| 3807 | u32 ch_mask; |
| 3808 | u16 encode_opt; |
| 3809 | u16 adv_encode_opt; |
| 3810 | u32 adv_encode_opt2; |
| 3811 | u32 drc_peak_ref; |
| 3812 | u32 drc_peak_target; |
| 3813 | u32 drc_ave_ref; |
| 3814 | u32 drc_ave_target; |
| 3815 | } __packed; |
| 3816 | |
| 3817 | struct asm_aac_cfg { |
| 3818 | u16 format; |
| 3819 | u16 aot; |
| 3820 | u16 ep_config; |
| 3821 | u16 section_data_resilience; |
| 3822 | u16 scalefactor_data_resilience; |
| 3823 | u16 spectral_data_resilience; |
| 3824 | u16 ch_cfg; |
| 3825 | u16 reserved; |
| 3826 | u32 sample_rate; |
| 3827 | } __packed; |
| 3828 | |
| 3829 | struct asm_amrwbplus_cfg { |
| 3830 | u32 size_bytes; |
| 3831 | u32 version; |
| 3832 | u32 num_channels; |
| 3833 | u32 amr_band_mode; |
| 3834 | u32 amr_dtx_mode; |
| 3835 | u32 amr_frame_fmt; |
| 3836 | u32 amr_lsf_idx; |
| 3837 | } __packed; |
| 3838 | |
| 3839 | struct asm_flac_cfg { |
| 3840 | u32 sample_rate; |
| 3841 | u32 ext_sample_rate; |
| 3842 | u32 min_frame_size; |
| 3843 | u32 max_frame_size; |
| 3844 | u16 stream_info_present; |
| 3845 | u16 min_blk_size; |
| 3846 | u16 max_blk_size; |
| 3847 | u16 ch_cfg; |
| 3848 | u16 sample_size; |
| 3849 | u16 md5_sum; |
| 3850 | }; |
| 3851 | |
| 3852 | struct asm_alac_cfg { |
| 3853 | u32 frame_length; |
| 3854 | u8 compatible_version; |
| 3855 | u8 bit_depth; |
| 3856 | u8 pb; |
| 3857 | u8 mb; |
| 3858 | u8 kb; |
| 3859 | u8 num_channels; |
| 3860 | u16 max_run; |
| 3861 | u32 max_frame_bytes; |
| 3862 | u32 avg_bit_rate; |
| 3863 | u32 sample_rate; |
| 3864 | u32 channel_layout_tag; |
| 3865 | }; |
| 3866 | |
| 3867 | struct asm_g711_dec_cfg { |
| 3868 | u32 sample_rate; |
| 3869 | }; |
| 3870 | |
| 3871 | struct asm_vorbis_cfg { |
| 3872 | u32 bit_stream_fmt; |
| 3873 | }; |
| 3874 | |
| 3875 | struct asm_ape_cfg { |
| 3876 | u16 compatible_version; |
| 3877 | u16 compression_level; |
| 3878 | u32 format_flags; |
| 3879 | u32 blocks_per_frame; |
| 3880 | u32 final_frame_blocks; |
| 3881 | u32 total_frames; |
| 3882 | u16 bits_per_sample; |
| 3883 | u16 num_channels; |
| 3884 | u32 sample_rate; |
| 3885 | u32 seek_table_present; |
| 3886 | }; |
| 3887 | |
| 3888 | struct asm_dsd_cfg { |
| 3889 | u16 num_version; |
| 3890 | u16 is_bitwise_big_endian; |
| 3891 | u16 dsd_channel_block_size; |
| 3892 | u16 num_channels; |
| 3893 | u8 channel_mapping[8]; |
| 3894 | u32 dsd_data_rate; |
| 3895 | }; |
| 3896 | |
| 3897 | struct asm_softpause_params { |
| 3898 | u32 enable; |
| 3899 | u32 period; |
| 3900 | u32 step; |
| 3901 | u32 rampingcurve; |
| 3902 | } __packed; |
| 3903 | |
| 3904 | struct asm_softvolume_params { |
| 3905 | u32 period; |
| 3906 | u32 step; |
| 3907 | u32 rampingcurve; |
| 3908 | } __packed; |
| 3909 | |
| 3910 | #define ASM_END_POINT_DEVICE_MATRIX 0 |
| 3911 | |
| 3912 | #define PCM_CHANNEL_NULL 0 |
| 3913 | |
| 3914 | /* Front left channel. */ |
| 3915 | #define PCM_CHANNEL_FL 1 |
| 3916 | |
| 3917 | /* Front right channel. */ |
| 3918 | #define PCM_CHANNEL_FR 2 |
| 3919 | |
| 3920 | /* Front center channel. */ |
| 3921 | #define PCM_CHANNEL_FC 3 |
| 3922 | |
| 3923 | /* Left surround channel.*/ |
| 3924 | #define PCM_CHANNEL_LS 4 |
| 3925 | |
| 3926 | /* Right surround channel.*/ |
| 3927 | #define PCM_CHANNEL_RS 5 |
| 3928 | |
| 3929 | /* Low frequency effect channel. */ |
| 3930 | #define PCM_CHANNEL_LFE 6 |
| 3931 | |
| 3932 | /* Center surround channel; Rear center channel. */ |
| 3933 | #define PCM_CHANNEL_CS 7 |
| 3934 | |
| 3935 | /* Left back channel; Rear left channel. */ |
| 3936 | #define PCM_CHANNEL_LB 8 |
| 3937 | |
| 3938 | /* Right back channel; Rear right channel. */ |
| 3939 | #define PCM_CHANNEL_RB 9 |
| 3940 | |
| 3941 | /* Top surround channel. */ |
| 3942 | #define PCM_CHANNELS 10 |
| 3943 | |
| 3944 | /* Center vertical height channel.*/ |
| 3945 | #define PCM_CHANNEL_CVH 11 |
| 3946 | |
| 3947 | /* Mono surround channel.*/ |
| 3948 | #define PCM_CHANNEL_MS 12 |
| 3949 | |
| 3950 | /* Front left of center. */ |
| 3951 | #define PCM_CHANNEL_FLC 13 |
| 3952 | |
| 3953 | /* Front right of center. */ |
| 3954 | #define PCM_CHANNEL_FRC 14 |
| 3955 | |
| 3956 | /* Rear left of center. */ |
| 3957 | #define PCM_CHANNEL_RLC 15 |
| 3958 | |
| 3959 | /* Rear right of center. */ |
| 3960 | #define PCM_CHANNEL_RRC 16 |
| 3961 | |
| 3962 | #define PCM_FORMAT_MAX_NUM_CHANNEL 8 |
| 3963 | |
| 3964 | #define ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V2 0x00010DA5 |
| 3965 | |
| 3966 | #define ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V3 0x00010DDC |
| 3967 | |
| 3968 | #define ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V4 0x0001320C |
| 3969 | |
| 3970 | #define ASM_MEDIA_FMT_EVRCB_FS 0x00010BEF |
| 3971 | |
| 3972 | #define ASM_MEDIA_FMT_EVRCWB_FS 0x00010BF0 |
| 3973 | |
| 3974 | #define ASM_MEDIA_FMT_GENERIC_COMPRESSED 0x00013212 |
| 3975 | |
| 3976 | #define ASM_MAX_EQ_BANDS 12 |
| 3977 | |
| 3978 | #define ASM_DATA_CMD_MEDIA_FMT_UPDATE_V2 0x00010D98 |
| 3979 | |
| 3980 | struct asm_data_cmd_media_fmt_update_v2 { |
| 3981 | u32 fmt_blk_size; |
| 3982 | /* Media format block size in bytes.*/ |
| 3983 | } __packed; |
| 3984 | |
| 3985 | struct asm_generic_compressed_fmt_blk_t { |
| 3986 | struct apr_hdr hdr; |
| 3987 | struct asm_data_cmd_media_fmt_update_v2 fmt_blk; |
| 3988 | |
| 3989 | /* |
| 3990 | * Channel mapping array of bitstream output. |
| 3991 | * Channel[i] mapping describes channel i inside the buffer, where |
| 3992 | * i < num_channels. All valid used channels must be |
| 3993 | * present at the beginning of the array. |
| 3994 | */ |
| 3995 | uint8_t channel_mapping[8]; |
| 3996 | |
| 3997 | /* |
| 3998 | * Number of channels of the incoming bitstream. |
| 3999 | * Supported values: 1,2,3,4,5,6,7,8 |
| 4000 | */ |
| 4001 | uint16_t num_channels; |
| 4002 | |
| 4003 | /* |
| 4004 | * Nominal bits per sample value of the incoming bitstream. |
| 4005 | * Supported values: 16, 32 |
| 4006 | */ |
| 4007 | uint16_t bits_per_sample; |
| 4008 | |
| 4009 | /* |
| 4010 | * Nominal sampling rate of the incoming bitstream. |
| 4011 | * Supported values: 8000, 11025, 16000, 22050, 24000, 32000, |
| 4012 | * 44100, 48000, 88200, 96000, 176400, 192000, |
| 4013 | * 352800, 384000 |
| 4014 | */ |
| 4015 | uint32_t sampling_rate; |
| 4016 | |
| 4017 | } __packed; |
| 4018 | |
| 4019 | |
| 4020 | /* Command to send sample rate & channels for IEC61937 (compressed) or IEC60958 |
| 4021 | * (pcm) streams. Both audio standards use the same format and are used for |
| 4022 | * HDMI or SPDIF. |
| 4023 | */ |
| 4024 | #define ASM_DATA_CMD_IEC_60958_MEDIA_FMT 0x0001321E |
| 4025 | |
| 4026 | struct asm_iec_compressed_fmt_blk_t { |
| 4027 | struct apr_hdr hdr; |
| 4028 | |
| 4029 | /* |
| 4030 | * Nominal sampling rate of the incoming bitstream. |
| 4031 | * Supported values: 8000, 11025, 16000, 22050, 24000, 32000, |
| 4032 | * 44100, 48000, 88200, 96000, 176400, 192000, |
| 4033 | * 352800, 384000 |
| 4034 | */ |
| 4035 | uint32_t sampling_rate; |
| 4036 | |
| 4037 | /* |
| 4038 | * Number of channels of the incoming bitstream. |
| 4039 | * Supported values: 1,2,3,4,5,6,7,8 |
| 4040 | */ |
| 4041 | uint32_t num_channels; |
| 4042 | |
| 4043 | } __packed; |
| 4044 | |
| 4045 | struct asm_multi_channel_pcm_fmt_blk_v2 { |
| 4046 | struct apr_hdr hdr; |
| 4047 | struct asm_data_cmd_media_fmt_update_v2 fmt_blk; |
| 4048 | |
| 4049 | u16 num_channels; |
| 4050 | /* Number of channels. Supported values: 1 to 8 */ |
| 4051 | u16 bits_per_sample; |
| 4052 | /* Number of bits per sample per channel. * Supported values: |
| 4053 | * 16, 24 * When used for playback, the client must send 24-bit |
| 4054 | * samples packed in 32-bit words. The 24-bit samples must be placed |
| 4055 | * in the most significant 24 bits of the 32-bit word. When used for |
| 4056 | * recording, the aDSP sends 24-bit samples packed in 32-bit words. |
| 4057 | * The 24-bit samples are placed in the most significant 24 bits of |
| 4058 | * the 32-bit word. |
| 4059 | */ |
| 4060 | |
| 4061 | |
| 4062 | u32 sample_rate; |
| 4063 | /* Number of samples per second (in Hertz). |
| 4064 | * Supported values: 2000 to 48000 |
| 4065 | */ |
| 4066 | |
| 4067 | u16 is_signed; |
| 4068 | /* Flag that indicates the samples are signed (1). */ |
| 4069 | |
| 4070 | u16 reserved; |
| 4071 | /* reserved field for 32 bit alignment. must be set to zero. */ |
| 4072 | |
| 4073 | u8 channel_mapping[8]; |
| 4074 | /* Channel array of size 8. |
| 4075 | * Supported values: |
| 4076 | * - #PCM_CHANNEL_L |
| 4077 | * - #PCM_CHANNEL_R |
| 4078 | * - #PCM_CHANNEL_C |
| 4079 | * - #PCM_CHANNEL_LS |
| 4080 | * - #PCM_CHANNEL_RS |
| 4081 | * - #PCM_CHANNEL_LFE |
| 4082 | * - #PCM_CHANNEL_CS |
| 4083 | * - #PCM_CHANNEL_LB |
| 4084 | * - #PCM_CHANNEL_RB |
| 4085 | * - #PCM_CHANNELS |
| 4086 | * - #PCM_CHANNEL_CVH |
| 4087 | * - #PCM_CHANNEL_MS |
| 4088 | * - #PCM_CHANNEL_FLC |
| 4089 | * - #PCM_CHANNEL_FRC |
| 4090 | * - #PCM_CHANNEL_RLC |
| 4091 | * - #PCM_CHANNEL_RRC |
| 4092 | * |
| 4093 | * Channel[i] mapping describes channel I. Each element i of the |
| 4094 | * array describes channel I inside the buffer where 0 @le I < |
| 4095 | * num_channels. An unused channel is set to zero. |
| 4096 | */ |
| 4097 | } __packed; |
| 4098 | |
| 4099 | struct asm_multi_channel_pcm_fmt_blk_v3 { |
| 4100 | uint16_t num_channels; |
| 4101 | /* |
| 4102 | * Number of channels |
| 4103 | * Supported values: 1 to 8 |
| 4104 | */ |
| 4105 | |
| 4106 | uint16_t bits_per_sample; |
| 4107 | /* |
| 4108 | * Number of bits per sample per channel |
| 4109 | * Supported values: 16, 24 |
| 4110 | */ |
| 4111 | |
| 4112 | uint32_t sample_rate; |
| 4113 | /* |
| 4114 | * Number of samples per second |
| 4115 | * Supported values: 2000 to 48000, 96000,192000 Hz |
| 4116 | */ |
| 4117 | |
| 4118 | uint16_t is_signed; |
| 4119 | /* Flag that indicates that PCM samples are signed (1) */ |
| 4120 | |
| 4121 | uint16_t sample_word_size; |
| 4122 | /* |
| 4123 | * Size in bits of the word that holds a sample of a channel. |
| 4124 | * Supported values: 12,24,32 |
| 4125 | */ |
| 4126 | |
| 4127 | uint8_t channel_mapping[8]; |
| 4128 | /* |
| 4129 | * Each element, i, in the array describes channel i inside the buffer where |
| 4130 | * 0 <= i < num_channels. Unused channels are set to 0. |
| 4131 | */ |
| 4132 | } __packed; |
| 4133 | |
| 4134 | struct asm_multi_channel_pcm_fmt_blk_v4 { |
| 4135 | uint16_t num_channels; |
| 4136 | /* |
| 4137 | * Number of channels |
| 4138 | * Supported values: 1 to 8 |
| 4139 | */ |
| 4140 | |
| 4141 | uint16_t bits_per_sample; |
| 4142 | /* |
| 4143 | * Number of bits per sample per channel |
| 4144 | * Supported values: 16, 24, 32 |
| 4145 | */ |
| 4146 | |
| 4147 | uint32_t sample_rate; |
| 4148 | /* |
| 4149 | * Number of samples per second |
| 4150 | * Supported values: 2000 to 48000, 96000,192000 Hz |
| 4151 | */ |
| 4152 | |
| 4153 | uint16_t is_signed; |
| 4154 | /* Flag that indicates that PCM samples are signed (1) */ |
| 4155 | |
| 4156 | uint16_t sample_word_size; |
| 4157 | /* |
| 4158 | * Size in bits of the word that holds a sample of a channel. |
| 4159 | * Supported values: 12,24,32 |
| 4160 | */ |
| 4161 | |
| 4162 | uint8_t channel_mapping[8]; |
| 4163 | /* |
| 4164 | * Each element, i, in the array describes channel i inside the buffer where |
| 4165 | * 0 <= i < num_channels. Unused channels are set to 0. |
| 4166 | */ |
| 4167 | uint16_t endianness; |
| 4168 | /* |
| 4169 | * Flag to indicate the endianness of the pcm sample |
| 4170 | * Supported values: 0 - Little endian (all other formats) |
| 4171 | * 1 - Big endian (AIFF) |
| 4172 | */ |
| 4173 | uint16_t mode; |
| 4174 | /* |
| 4175 | * Mode to provide additional info about the pcm input data. |
| 4176 | * Supported values: 0 - Default QFs (Q15 for 16b, Q23 for packed 24b, |
| 4177 | * Q31 for unpacked 24b or 32b) |
| 4178 | * 15 - for 16 bit |
| 4179 | * 23 - for 24b packed or 8.24 format |
| 4180 | * 31 - for 24b unpacked or 32bit |
| 4181 | */ |
| 4182 | } __packed; |
| 4183 | |
| 4184 | /* |
| 4185 | * Payload of the multichannel PCM configuration parameters in |
| 4186 | * the ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V3 media format. |
| 4187 | */ |
| 4188 | struct asm_multi_channel_pcm_fmt_blk_param_v3 { |
| 4189 | struct apr_hdr hdr; |
| 4190 | struct asm_data_cmd_media_fmt_update_v2 fmt_blk; |
| 4191 | struct asm_multi_channel_pcm_fmt_blk_v3 param; |
| 4192 | } __packed; |
| 4193 | |
| 4194 | /* |
| 4195 | * Payload of the multichannel PCM configuration parameters in |
| 4196 | * the ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V4 media format. |
| 4197 | */ |
| 4198 | struct asm_multi_channel_pcm_fmt_blk_param_v4 { |
| 4199 | struct apr_hdr hdr; |
| 4200 | struct asm_data_cmd_media_fmt_update_v2 fmt_blk; |
| 4201 | struct asm_multi_channel_pcm_fmt_blk_v4 param; |
| 4202 | } __packed; |
| 4203 | |
| 4204 | struct asm_stream_cmd_set_encdec_param { |
| 4205 | u32 param_id; |
| 4206 | /* ID of the parameter. */ |
| 4207 | |
| 4208 | u32 param_size; |
| 4209 | /* Data size of this parameter, in bytes. The size is a multiple |
| 4210 | * of 4 bytes. |
| 4211 | */ |
| 4212 | |
| 4213 | } __packed; |
| 4214 | |
| 4215 | struct asm_enc_cfg_blk_param_v2 { |
| 4216 | u32 frames_per_buf; |
| 4217 | /* Number of encoded frames to pack into each buffer. |
| 4218 | * |
| 4219 | * @note1hang This is only guidance information for the aDSP. The |
| 4220 | * number of encoded frames put into each buffer (specified by the |
| 4221 | * client) is less than or equal to this number. |
| 4222 | */ |
| 4223 | |
| 4224 | u32 enc_cfg_blk_size; |
| 4225 | /* Size in bytes of the encoder configuration block that follows |
| 4226 | * this member. |
| 4227 | */ |
| 4228 | |
| 4229 | } __packed; |
| 4230 | |
| 4231 | /* @brief Dolby Digital Plus end point configuration structure |
| 4232 | */ |
| 4233 | struct asm_dec_ddp_endp_param_v2 { |
| 4234 | struct apr_hdr hdr; |
| 4235 | struct asm_stream_cmd_set_encdec_param encdec; |
| 4236 | int endp_param_value; |
| 4237 | } __packed; |
| 4238 | |
| 4239 | /* |
| 4240 | * Payload of the multichannel PCM encoder configuration parameters in |
| 4241 | * the ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V4 media format. |
| 4242 | */ |
| 4243 | |
| 4244 | struct asm_multi_channel_pcm_enc_cfg_v4 { |
| 4245 | struct apr_hdr hdr; |
| 4246 | struct asm_stream_cmd_set_encdec_param encdec; |
| 4247 | struct asm_enc_cfg_blk_param_v2 encblk; |
| 4248 | uint16_t num_channels; |
| 4249 | /* |
| 4250 | * Number of PCM channels. |
| 4251 | * @values |
| 4252 | * - 0 -- Native mode |
| 4253 | * - 1 -- 8 channels |
| 4254 | * Native mode indicates that encoding must be performed with the number |
| 4255 | * of channels at the input. |
| 4256 | */ |
| 4257 | uint16_t bits_per_sample; |
| 4258 | /* |
| 4259 | * Number of bits per sample per channel. |
| 4260 | * @values 16, 24 |
| 4261 | */ |
| 4262 | uint32_t sample_rate; |
| 4263 | /* |
| 4264 | * Number of samples per second. |
| 4265 | * @values 0, 8000 to 48000 Hz |
| 4266 | * A value of 0 indicates the native sampling rate. Encoding is |
| 4267 | * performed at the input sampling rate. |
| 4268 | */ |
| 4269 | uint16_t is_signed; |
| 4270 | /* |
| 4271 | * Flag that indicates the PCM samples are signed (1). Currently, only |
| 4272 | * signed PCM samples are supported. |
| 4273 | */ |
| 4274 | uint16_t sample_word_size; |
| 4275 | /* |
| 4276 | * The size in bits of the word that holds a sample of a channel. |
| 4277 | * @values 16, 24, 32 |
| 4278 | * 16-bit samples are always placed in 16-bit words: |
| 4279 | * sample_word_size = 1. |
| 4280 | * 24-bit samples can be placed in 32-bit words or in consecutive |
| 4281 | * 24-bit words. |
| 4282 | * - If sample_word_size = 32, 24-bit samples are placed in the |
| 4283 | * most significant 24 bits of a 32-bit word. |
| 4284 | * - If sample_word_size = 24, 24-bit samples are placed in |
| 4285 | * 24-bit words. @tablebulletend |
| 4286 | */ |
| 4287 | uint8_t channel_mapping[8]; |
| 4288 | /* |
| 4289 | * Channel mapping array expected at the encoder output. |
| 4290 | * Channel[i] mapping describes channel i inside the buffer, where |
| 4291 | * 0 @le i < num_channels. All valid used channels must be present at |
| 4292 | * the beginning of the array. |
| 4293 | * If Native mode is set for the channels, this field is ignored. |
| 4294 | * @values See Section @xref{dox:PcmChannelDefs} |
| 4295 | */ |
| 4296 | uint16_t endianness; |
| 4297 | /* |
| 4298 | * Flag to indicate the endianness of the pcm sample |
| 4299 | * Supported values: 0 - Little endian (all other formats) |
| 4300 | * 1 - Big endian (AIFF) |
| 4301 | */ |
| 4302 | uint16_t mode; |
| 4303 | /* |
| 4304 | * Mode to provide additional info about the pcm input data. |
| 4305 | * Supported values: 0 - Default QFs (Q15 for 16b, Q23 for packed 24b, |
| 4306 | * Q31 for unpacked 24b or 32b) |
| 4307 | * 15 - for 16 bit |
| 4308 | * 23 - for 24b packed or 8.24 format |
| 4309 | * 31 - for 24b unpacked or 32bit |
| 4310 | */ |
| 4311 | } __packed; |
| 4312 | |
| 4313 | /* |
| 4314 | * Payload of the multichannel PCM encoder configuration parameters in |
| 4315 | * the ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V3 media format. |
| 4316 | */ |
| 4317 | |
| 4318 | struct asm_multi_channel_pcm_enc_cfg_v3 { |
| 4319 | struct apr_hdr hdr; |
| 4320 | struct asm_stream_cmd_set_encdec_param encdec; |
| 4321 | struct asm_enc_cfg_blk_param_v2 encblk; |
| 4322 | uint16_t num_channels; |
| 4323 | /* |
| 4324 | * Number of PCM channels. |
| 4325 | * @values |
| 4326 | * - 0 -- Native mode |
| 4327 | * - 1 -- 8 channels |
| 4328 | * Native mode indicates that encoding must be performed with the number |
| 4329 | * of channels at the input. |
| 4330 | */ |
| 4331 | uint16_t bits_per_sample; |
| 4332 | /* |
| 4333 | * Number of bits per sample per channel. |
| 4334 | * @values 16, 24 |
| 4335 | */ |
| 4336 | uint32_t sample_rate; |
| 4337 | /* |
| 4338 | * Number of samples per second. |
| 4339 | * @values 0, 8000 to 48000 Hz |
| 4340 | * A value of 0 indicates the native sampling rate. Encoding is |
| 4341 | * performed at the input sampling rate. |
| 4342 | */ |
| 4343 | uint16_t is_signed; |
| 4344 | /* |
| 4345 | * Flag that indicates the PCM samples are signed (1). Currently, only |
| 4346 | * signed PCM samples are supported. |
| 4347 | */ |
| 4348 | uint16_t sample_word_size; |
| 4349 | /* |
| 4350 | * The size in bits of the word that holds a sample of a channel. |
| 4351 | * @values 16, 24, 32 |
| 4352 | * 16-bit samples are always placed in 16-bit words: |
| 4353 | * sample_word_size = 1. |
| 4354 | * 24-bit samples can be placed in 32-bit words or in consecutive |
| 4355 | * 24-bit words. |
| 4356 | * - If sample_word_size = 32, 24-bit samples are placed in the |
| 4357 | * most significant 24 bits of a 32-bit word. |
| 4358 | * - If sample_word_size = 24, 24-bit samples are placed in |
| 4359 | * 24-bit words. @tablebulletend |
| 4360 | */ |
| 4361 | uint8_t channel_mapping[8]; |
| 4362 | /* |
| 4363 | * Channel mapping array expected at the encoder output. |
| 4364 | * Channel[i] mapping describes channel i inside the buffer, where |
| 4365 | * 0 @le i < num_channels. All valid used channels must be present at |
| 4366 | * the beginning of the array. |
| 4367 | * If Native mode is set for the channels, this field is ignored. |
| 4368 | * @values See Section @xref{dox:PcmChannelDefs} |
| 4369 | */ |
| 4370 | }; |
| 4371 | |
| 4372 | /* @brief Multichannel PCM encoder configuration structure used |
| 4373 | * in the #ASM_PARAM_ID_ENCDEC_ENC_CFG_BLK_V2 command. |
| 4374 | */ |
| 4375 | |
| 4376 | struct asm_multi_channel_pcm_enc_cfg_v2 { |
| 4377 | struct apr_hdr hdr; |
| 4378 | struct asm_stream_cmd_set_encdec_param encdec; |
| 4379 | struct asm_enc_cfg_blk_param_v2 encblk; |
| 4380 | uint16_t num_channels; |
| 4381 | /*< Number of PCM channels. |
| 4382 | * |
| 4383 | * Supported values: - 0 -- Native mode - 1 -- 8 Native mode |
| 4384 | * indicates that encoding must be performed with the number of |
| 4385 | * channels at the input. |
| 4386 | */ |
| 4387 | |
| 4388 | uint16_t bits_per_sample; |
| 4389 | /*< Number of bits per sample per channel. |
| 4390 | * Supported values: 16, 24 |
| 4391 | */ |
| 4392 | |
| 4393 | uint32_t sample_rate; |
| 4394 | /*< Number of samples per second (in Hertz). |
| 4395 | * |
| 4396 | * Supported values: 0, 8000 to 48000 A value of 0 indicates the |
| 4397 | * native sampling rate. Encoding is performed at the input sampling |
| 4398 | * rate. |
| 4399 | */ |
| 4400 | |
| 4401 | uint16_t is_signed; |
| 4402 | /*< Specifies whether the samples are signed (1). Currently, |
| 4403 | * only signed samples are supported. |
| 4404 | */ |
| 4405 | |
| 4406 | uint16_t reserved; |
| 4407 | /*< reserved field for 32 bit alignment. must be set to zero.*/ |
| 4408 | |
| 4409 | |
| 4410 | uint8_t channel_mapping[8]; |
| 4411 | } __packed; |
| 4412 | |
| 4413 | #define ASM_MEDIA_FMT_MP3 0x00010BE9 |
| 4414 | #define ASM_MEDIA_FMT_AAC_V2 0x00010DA6 |
| 4415 | |
| 4416 | /* @xreflabel |
| 4417 | * {hdr:AsmMediaFmtDolbyAac} Media format ID for the |
| 4418 | * Dolby AAC decoder. This format ID is be used if the client wants |
| 4419 | * to use the Dolby AAC decoder to decode MPEG2 and MPEG4 AAC |
| 4420 | * contents. |
| 4421 | */ |
| 4422 | |
| 4423 | #define ASM_MEDIA_FMT_DOLBY_AAC 0x00010D86 |
| 4424 | |
| 4425 | /* Enumeration for the audio data transport stream AAC format. */ |
| 4426 | #define ASM_MEDIA_FMT_AAC_FORMAT_FLAG_ADTS 0 |
| 4427 | |
| 4428 | /* Enumeration for low overhead audio stream AAC format. */ |
| 4429 | #define ASM_MEDIA_FMT_AAC_FORMAT_FLAG_LOAS 1 |
| 4430 | |
| 4431 | /* Enumeration for the audio data interchange format |
| 4432 | * AAC format. |
| 4433 | */ |
| 4434 | #define ASM_MEDIA_FMT_AAC_FORMAT_FLAG_ADIF 2 |
| 4435 | |
| 4436 | /* Enumeration for the raw AAC format. */ |
| 4437 | #define ASM_MEDIA_FMT_AAC_FORMAT_FLAG_RAW 3 |
| 4438 | |
| 4439 | /* Enumeration for the AAC LATM format. */ |
| 4440 | #define ASM_MEDIA_FMT_AAC_FORMAT_FLAG_LATM 4 |
| 4441 | |
| 4442 | #define ASM_MEDIA_FMT_AAC_AOT_LC 2 |
| 4443 | #define ASM_MEDIA_FMT_AAC_AOT_SBR 5 |
| 4444 | #define ASM_MEDIA_FMT_AAC_AOT_PS 29 |
| 4445 | #define ASM_MEDIA_FMT_AAC_AOT_BSAC 22 |
| 4446 | |
| 4447 | struct asm_aac_fmt_blk_v2 { |
| 4448 | struct apr_hdr hdr; |
| 4449 | struct asm_data_cmd_media_fmt_update_v2 fmt_blk; |
| 4450 | |
| 4451 | u16 aac_fmt_flag; |
| 4452 | /* Bitstream format option. |
| 4453 | * Supported values: |
| 4454 | * - #ASM_MEDIA_FMT_AAC_FORMAT_FLAG_ADTS |
| 4455 | * - #ASM_MEDIA_FMT_AAC_FORMAT_FLAG_LOAS |
| 4456 | * - #ASM_MEDIA_FMT_AAC_FORMAT_FLAG_ADIF |
| 4457 | * - #ASM_MEDIA_FMT_AAC_FORMAT_FLAG_RAW |
| 4458 | */ |
| 4459 | |
| 4460 | u16 audio_objype; |
| 4461 | /* Audio Object Type (AOT) present in the AAC stream. |
| 4462 | * Supported values: |
| 4463 | * - #ASM_MEDIA_FMT_AAC_AOT_LC |
| 4464 | * - #ASM_MEDIA_FMT_AAC_AOT_SBR |
| 4465 | * - #ASM_MEDIA_FMT_AAC_AOT_BSAC |
| 4466 | * - #ASM_MEDIA_FMT_AAC_AOT_PS |
| 4467 | * - Otherwise -- Not supported |
| 4468 | */ |
| 4469 | |
| 4470 | u16 channel_config; |
| 4471 | /* Number of channels present in the AAC stream. |
| 4472 | * Supported values: |
| 4473 | * - 1 -- Mono |
| 4474 | * - 2 -- Stereo |
| 4475 | * - 6 -- 5.1 content |
| 4476 | */ |
| 4477 | |
| 4478 | u16 total_size_of_PCE_bits; |
| 4479 | /* greater or equal to zero. * -In case of RAW formats and |
| 4480 | * channel config = 0 (PCE), client can send * the bit stream |
| 4481 | * containing PCE immediately following this structure * (in-band). |
| 4482 | * -This number does not include bits included for 32 bit alignment. |
| 4483 | * -If zero, then the PCE info is assumed to be available in the |
| 4484 | * audio -bit stream & not in-band. |
| 4485 | */ |
| 4486 | |
| 4487 | u32 sample_rate; |
| 4488 | /* Number of samples per second (in Hertz). |
| 4489 | * |
| 4490 | * Supported values: 8000, 11025, 12000, 16000, 22050, 24000, 32000, |
| 4491 | * 44100, 48000 |
| 4492 | * |
| 4493 | * This field must be equal to the sample rate of the AAC-LC |
| 4494 | * decoder's output. - For MP4 or 3GP containers, this is indicated |
| 4495 | * by the samplingFrequencyIndex field in the AudioSpecificConfig |
| 4496 | * element. - For ADTS format, this is indicated by the |
| 4497 | * samplingFrequencyIndex in the ADTS fixed header. - For ADIF |
| 4498 | * format, this is indicated by the samplingFrequencyIndex in the |
| 4499 | * program_config_element present in the ADIF header. |
| 4500 | */ |
| 4501 | |
| 4502 | } __packed; |
| 4503 | |
| 4504 | struct asm_aac_enc_cfg_v2 { |
| 4505 | struct apr_hdr hdr; |
| 4506 | struct asm_stream_cmd_set_encdec_param encdec; |
| 4507 | struct asm_enc_cfg_blk_param_v2 encblk; |
| 4508 | |
| 4509 | u32 bit_rate; |
| 4510 | /* Encoding rate in bits per second. */ |
| 4511 | u32 enc_mode; |
| 4512 | /* Encoding mode. |
| 4513 | * Supported values: |
| 4514 | * - #ASM_MEDIA_FMT_AAC_AOT_LC |
| 4515 | * - #ASM_MEDIA_FMT_AAC_AOT_SBR |
| 4516 | * - #ASM_MEDIA_FMT_AAC_AOT_PS |
| 4517 | */ |
| 4518 | u16 aac_fmt_flag; |
| 4519 | /* AAC format flag. |
| 4520 | * Supported values: |
| 4521 | * - #ASM_MEDIA_FMT_AAC_FORMAT_FLAG_ADTS |
| 4522 | * - #ASM_MEDIA_FMT_AAC_FORMAT_FLAG_RAW |
| 4523 | */ |
| 4524 | u16 channel_cfg; |
| 4525 | /* Number of channels to encode. |
| 4526 | * Supported values: |
| 4527 | * - 0 -- Native mode |
| 4528 | * - 1 -- Mono |
| 4529 | * - 2 -- Stereo |
| 4530 | * - Other values are not supported. |
| 4531 | * @note1hang The eAAC+ encoder mode supports only stereo. |
| 4532 | * Native mode indicates that encoding must be performed with the |
| 4533 | * number of channels at the input. |
| 4534 | * The number of channels must not change during encoding. |
| 4535 | */ |
| 4536 | |
| 4537 | u32 sample_rate; |
| 4538 | /* Number of samples per second. |
| 4539 | * Supported values: - 0 -- Native mode - For other values, |
| 4540 | * Native mode indicates that encoding must be performed with the |
| 4541 | * sampling rate at the input. |
| 4542 | * The sampling rate must not change during encoding. |
| 4543 | */ |
| 4544 | |
| 4545 | } __packed; |
| 4546 | |
| 4547 | #define ASM_MEDIA_FMT_G711_ALAW_FS 0x00010BF7 |
| 4548 | #define ASM_MEDIA_FMT_G711_MLAW_FS 0x00010C2E |
| 4549 | |
| 4550 | struct asm_g711_enc_cfg_v2 { |
| 4551 | struct apr_hdr hdr; |
| 4552 | struct asm_stream_cmd_set_encdec_param encdec; |
| 4553 | struct asm_enc_cfg_blk_param_v2 encblk; |
| 4554 | |
| 4555 | u32 sample_rate; |
| 4556 | /* |
| 4557 | * Number of samples per second. |
| 4558 | * Supported values: 8000, 16000 Hz |
| 4559 | */ |
| 4560 | |
| 4561 | } __packed; |
| 4562 | |
| 4563 | struct asm_vorbis_fmt_blk_v2 { |
| 4564 | struct apr_hdr hdr; |
| 4565 | struct asm_data_cmd_media_fmt_update_v2 fmtblk; |
| 4566 | u32 bit_stream_fmt; |
| 4567 | /* Bit stream format. |
| 4568 | * Supported values: |
| 4569 | * - 0 -- Raw bitstream |
| 4570 | * - 1 -- Transcoded bitstream |
| 4571 | * |
| 4572 | * Transcoded bitstream containing the size of the frame as the first |
| 4573 | * word in each frame. |
| 4574 | */ |
| 4575 | |
| 4576 | } __packed; |
| 4577 | |
| 4578 | struct asm_flac_fmt_blk_v2 { |
| 4579 | struct apr_hdr hdr; |
| 4580 | struct asm_data_cmd_media_fmt_update_v2 fmtblk; |
| 4581 | |
| 4582 | u16 is_stream_info_present; |
| 4583 | /* Specifies whether stream information is present in the FLAC format |
| 4584 | * block. |
| 4585 | * |
| 4586 | * Supported values: |
| 4587 | * - 0 -- Stream information is not present in this message |
| 4588 | * - 1 -- Stream information is present in this message |
| 4589 | * |
| 4590 | * When set to 1, the FLAC bitstream was successfully parsed by the |
| 4591 | * client, and other fields in the FLAC format block can be read by the |
| 4592 | * decoder to get metadata stream information. |
| 4593 | */ |
| 4594 | |
| 4595 | u16 num_channels; |
| 4596 | /* Number of channels for decoding. |
| 4597 | * Supported values: 1 to 2 |
| 4598 | */ |
| 4599 | |
| 4600 | u16 min_blk_size; |
| 4601 | /* Minimum block size (in samples) used in the stream. It must be less |
| 4602 | * than or equal to max_blk_size. |
| 4603 | */ |
| 4604 | |
| 4605 | u16 max_blk_size; |
| 4606 | /* Maximum block size (in samples) used in the stream. If the |
| 4607 | * minimum block size equals the maximum block size, a fixed block |
| 4608 | * size stream is implied. |
| 4609 | */ |
| 4610 | |
| 4611 | u16 md5_sum[8]; |
| 4612 | /* MD5 signature array of the unencoded audio data. This allows the |
| 4613 | * decoder to determine if an error exists in the audio data, even when |
| 4614 | * the error does not result in an invalid bitstream. |
| 4615 | */ |
| 4616 | |
| 4617 | u32 sample_rate; |
| 4618 | /* Number of samples per second. |
| 4619 | * Supported values: 8000 to 48000 Hz |
| 4620 | */ |
| 4621 | |
| 4622 | u32 min_frame_size; |
| 4623 | /* Minimum frame size used in the stream. |
| 4624 | * Supported values: |
| 4625 | * - > 0 bytes |
| 4626 | * - 0 -- The value is unknown |
| 4627 | */ |
| 4628 | |
| 4629 | u32 max_frame_size; |
| 4630 | /* Maximum frame size used in the stream. |
| 4631 | * Supported values: |
| 4632 | * -- > 0 bytes |
| 4633 | * -- 0 . The value is unknown |
| 4634 | */ |
| 4635 | |
| 4636 | u16 sample_size; |
| 4637 | /* Bits per sample.Supported values: 8, 16 */ |
| 4638 | |
| 4639 | u16 reserved; |
| 4640 | /* Clients must set this field to zero |
| 4641 | */ |
| 4642 | |
| 4643 | } __packed; |
| 4644 | |
| 4645 | struct asm_alac_fmt_blk_v2 { |
| 4646 | struct apr_hdr hdr; |
| 4647 | struct asm_data_cmd_media_fmt_update_v2 fmtblk; |
| 4648 | |
| 4649 | u32 frame_length; |
| 4650 | u8 compatible_version; |
| 4651 | u8 bit_depth; |
| 4652 | u8 pb; |
| 4653 | u8 mb; |
| 4654 | u8 kb; |
| 4655 | u8 num_channels; |
| 4656 | u16 max_run; |
| 4657 | u32 max_frame_bytes; |
| 4658 | u32 avg_bit_rate; |
| 4659 | u32 sample_rate; |
| 4660 | u32 channel_layout_tag; |
| 4661 | |
| 4662 | } __packed; |
| 4663 | |
| 4664 | struct asm_g711_dec_fmt_blk_v2 { |
| 4665 | struct apr_hdr hdr; |
| 4666 | struct asm_data_cmd_media_fmt_update_v2 fmtblk; |
| 4667 | u32 sample_rate; |
| 4668 | } __packed; |
| 4669 | |
| 4670 | struct asm_ape_fmt_blk_v2 { |
| 4671 | struct apr_hdr hdr; |
| 4672 | struct asm_data_cmd_media_fmt_update_v2 fmtblk; |
| 4673 | |
| 4674 | u16 compatible_version; |
| 4675 | u16 compression_level; |
| 4676 | u32 format_flags; |
| 4677 | u32 blocks_per_frame; |
| 4678 | u32 final_frame_blocks; |
| 4679 | u32 total_frames; |
| 4680 | u16 bits_per_sample; |
| 4681 | u16 num_channels; |
| 4682 | u32 sample_rate; |
| 4683 | u32 seek_table_present; |
| 4684 | |
| 4685 | } __packed; |
| 4686 | |
| 4687 | struct asm_dsd_fmt_blk_v2 { |
| 4688 | struct apr_hdr hdr; |
| 4689 | struct asm_data_cmd_media_fmt_update_v2 fmtblk; |
| 4690 | |
| 4691 | u16 num_version; |
| 4692 | u16 is_bitwise_big_endian; |
| 4693 | u16 dsd_channel_block_size; |
| 4694 | u16 num_channels; |
| 4695 | u8 channel_mapping[8]; |
| 4696 | u32 dsd_data_rate; |
| 4697 | |
| 4698 | } __packed; |
| 4699 | |
| 4700 | #define ASM_MEDIA_FMT_AMRNB_FS 0x00010BEB |
| 4701 | |
| 4702 | /* Enumeration for 4.75 kbps AMR-NB Encoding mode. */ |
| 4703 | #define ASM_MEDIA_FMT_AMRNB_FS_ENCODE_MODE_MR475 0 |
| 4704 | |
| 4705 | /* Enumeration for 5.15 kbps AMR-NB Encoding mode. */ |
| 4706 | #define ASM_MEDIA_FMT_AMRNB_FS_ENCODE_MODE_MR515 1 |
| 4707 | |
| 4708 | /* Enumeration for 5.90 kbps AMR-NB Encoding mode. */ |
| 4709 | #define ASM_MEDIA_FMT_AMRNB_FS_ENCODE_MODE_MMR59 2 |
| 4710 | |
| 4711 | /* Enumeration for 6.70 kbps AMR-NB Encoding mode. */ |
| 4712 | #define ASM_MEDIA_FMT_AMRNB_FS_ENCODE_MODE_MMR67 3 |
| 4713 | |
| 4714 | /* Enumeration for 7.40 kbps AMR-NB Encoding mode. */ |
| 4715 | #define ASM_MEDIA_FMT_AMRNB_FS_ENCODE_MODE_MMR74 4 |
| 4716 | |
| 4717 | /* Enumeration for 7.95 kbps AMR-NB Encoding mode. */ |
| 4718 | #define ASM_MEDIA_FMT_AMRNB_FS_ENCODE_MODE_MMR795 5 |
| 4719 | |
| 4720 | /* Enumeration for 10.20 kbps AMR-NB Encoding mode. */ |
| 4721 | #define ASM_MEDIA_FMT_AMRNB_FS_ENCODE_MODE_MMR102 6 |
| 4722 | |
| 4723 | /* Enumeration for 12.20 kbps AMR-NB Encoding mode. */ |
| 4724 | #define ASM_MEDIA_FMT_AMRNB_FS_ENCODE_MODE_MMR122 7 |
| 4725 | |
| 4726 | /* Enumeration for AMR-NB Discontinuous Transmission mode off. */ |
| 4727 | #define ASM_MEDIA_FMT_AMRNB_FS_DTX_MODE_OFF 0 |
| 4728 | |
| 4729 | /* Enumeration for AMR-NB DTX mode VAD1. */ |
| 4730 | #define ASM_MEDIA_FMT_AMRNB_FS_DTX_MODE_VAD1 1 |
| 4731 | |
| 4732 | /* Enumeration for AMR-NB DTX mode VAD2. */ |
| 4733 | #define ASM_MEDIA_FMT_AMRNB_FS_DTX_MODE_VAD2 2 |
| 4734 | |
| 4735 | /* Enumeration for AMR-NB DTX mode auto. */ |
| 4736 | #define ASM_MEDIA_FMT_AMRNB_FS_DTX_MODE_AUTO 3 |
| 4737 | |
| 4738 | struct asm_amrnb_enc_cfg { |
| 4739 | struct apr_hdr hdr; |
| 4740 | struct asm_stream_cmd_set_encdec_param encdec; |
| 4741 | struct asm_enc_cfg_blk_param_v2 encblk; |
| 4742 | |
| 4743 | u16 enc_mode; |
| 4744 | /* AMR-NB encoding rate. |
| 4745 | * Supported values: |
| 4746 | * Use the ASM_MEDIA_FMT_AMRNB_FS_ENCODE_MODE_* |
| 4747 | * macros |
| 4748 | */ |
| 4749 | |
| 4750 | u16 dtx_mode; |
| 4751 | /* Specifies whether DTX mode is disabled or enabled. |
| 4752 | * Supported values: |
| 4753 | * - #ASM_MEDIA_FMT_AMRNB_FS_DTX_MODE_OFF |
| 4754 | * - #ASM_MEDIA_FMT_AMRNB_FS_DTX_MODE_VAD1 |
| 4755 | */ |
| 4756 | } __packed; |
| 4757 | |
| 4758 | #define ASM_MEDIA_FMT_AMRWB_FS 0x00010BEC |
| 4759 | |
| 4760 | /* Enumeration for 6.6 kbps AMR-WB Encoding mode. */ |
| 4761 | #define ASM_MEDIA_FMT_AMRWB_FS_ENCODE_MODE_MR66 0 |
| 4762 | |
| 4763 | /* Enumeration for 8.85 kbps AMR-WB Encoding mode. */ |
| 4764 | #define ASM_MEDIA_FMT_AMRWB_FS_ENCODE_MODE_MR885 1 |
| 4765 | |
| 4766 | /* Enumeration for 12.65 kbps AMR-WB Encoding mode. */ |
| 4767 | #define ASM_MEDIA_FMT_AMRWB_FS_ENCODE_MODE_MR1265 2 |
| 4768 | |
| 4769 | /* Enumeration for 14.25 kbps AMR-WB Encoding mode. */ |
| 4770 | #define ASM_MEDIA_FMT_AMRWB_FS_ENCODE_MODE_MR1425 3 |
| 4771 | |
| 4772 | /* Enumeration for 15.85 kbps AMR-WB Encoding mode. */ |
| 4773 | #define ASM_MEDIA_FMT_AMRWB_FS_ENCODE_MODE_MR1585 4 |
| 4774 | |
| 4775 | /* Enumeration for 18.25 kbps AMR-WB Encoding mode. */ |
| 4776 | #define ASM_MEDIA_FMT_AMRWB_FS_ENCODE_MODE_MR1825 5 |
| 4777 | |
| 4778 | /* Enumeration for 19.85 kbps AMR-WB Encoding mode. */ |
| 4779 | #define ASM_MEDIA_FMT_AMRWB_FS_ENCODE_MODE_MR1985 6 |
| 4780 | |
| 4781 | /* Enumeration for 23.05 kbps AMR-WB Encoding mode. */ |
| 4782 | #define ASM_MEDIA_FMT_AMRWB_FS_ENCODE_MODE_MR2305 7 |
| 4783 | |
| 4784 | /* Enumeration for 23.85 kbps AMR-WB Encoding mode. */ |
| 4785 | #define ASM_MEDIA_FMT_AMRWB_FS_ENCODE_MODE_MR2385 8 |
| 4786 | |
| 4787 | struct asm_amrwb_enc_cfg { |
| 4788 | struct apr_hdr hdr; |
| 4789 | struct asm_stream_cmd_set_encdec_param encdec; |
| 4790 | struct asm_enc_cfg_blk_param_v2 encblk; |
| 4791 | |
| 4792 | u16 enc_mode; |
| 4793 | /* AMR-WB encoding rate. |
| 4794 | * Suupported values: |
| 4795 | * Use the ASM_MEDIA_FMT_AMRWB_FS_ENCODE_MODE_* |
| 4796 | * macros |
| 4797 | */ |
| 4798 | |
| 4799 | u16 dtx_mode; |
| 4800 | /* Specifies whether DTX mode is disabled or enabled. |
| 4801 | * Supported values: |
| 4802 | * - #ASM_MEDIA_FMT_AMRNB_FS_DTX_MODE_OFF |
| 4803 | * - #ASM_MEDIA_FMT_AMRNB_FS_DTX_MODE_VAD1 |
| 4804 | */ |
| 4805 | } __packed; |
| 4806 | |
| 4807 | #define ASM_MEDIA_FMT_V13K_FS 0x00010BED |
| 4808 | |
| 4809 | /* Enumeration for 14.4 kbps V13K Encoding mode. */ |
| 4810 | #define ASM_MEDIA_FMT_V13K_FS_ENCODE_MODE_MR1440 0 |
| 4811 | |
| 4812 | /* Enumeration for 12.2 kbps V13K Encoding mode. */ |
| 4813 | #define ASM_MEDIA_FMT_V13K_FS_ENCODE_MODE_MR1220 1 |
| 4814 | |
| 4815 | /* Enumeration for 11.2 kbps V13K Encoding mode. */ |
| 4816 | #define ASM_MEDIA_FMT_V13K_FS_ENCODE_MODE_MR1120 2 |
| 4817 | |
| 4818 | /* Enumeration for 9.0 kbps V13K Encoding mode. */ |
| 4819 | #define ASM_MEDIA_FMT_V13K_FS_ENCODE_MODE_MR90 3 |
| 4820 | |
| 4821 | /* Enumeration for 7.2 kbps V13K eEncoding mode. */ |
| 4822 | #define ASM_MEDIA_FMT_V13K_FS_ENCODE_MODE_MR720 4 |
| 4823 | |
| 4824 | /* Enumeration for 1/8 vocoder rate.*/ |
| 4825 | #define ASM_MEDIA_FMT_VOC_ONE_EIGHTH_RATE 1 |
| 4826 | |
| 4827 | /* Enumeration for 1/4 vocoder rate. */ |
| 4828 | #define ASM_MEDIA_FMT_VOC_ONE_FOURTH_RATE 2 |
| 4829 | |
| 4830 | /* Enumeration for 1/2 vocoder rate. */ |
| 4831 | #define ASM_MEDIA_FMT_VOC_HALF_RATE 3 |
| 4832 | |
| 4833 | /* Enumeration for full vocoder rate. */ |
| 4834 | #define ASM_MEDIA_FMT_VOC_FULL_RATE 4 |
| 4835 | |
| 4836 | struct asm_v13k_enc_cfg { |
| 4837 | struct apr_hdr hdr; |
| 4838 | struct asm_stream_cmd_set_encdec_param encdec; |
| 4839 | struct asm_enc_cfg_blk_param_v2 encblk; |
| 4840 | u16 max_rate; |
| 4841 | /* Maximum allowed encoder frame rate. |
| 4842 | * Supported values: |
| 4843 | * - #ASM_MEDIA_FMT_VOC_ONE_EIGHTH_RATE |
| 4844 | * - #ASM_MEDIA_FMT_VOC_ONE_FOURTH_RATE |
| 4845 | * - #ASM_MEDIA_FMT_VOC_HALF_RATE |
| 4846 | * - #ASM_MEDIA_FMT_VOC_FULL_RATE |
| 4847 | */ |
| 4848 | |
| 4849 | u16 min_rate; |
| 4850 | /* Minimum allowed encoder frame rate. |
| 4851 | * Supported values: |
| 4852 | * - #ASM_MEDIA_FMT_VOC_ONE_EIGHTH_RATE |
| 4853 | * - #ASM_MEDIA_FMT_VOC_ONE_FOURTH_RATE |
| 4854 | * - #ASM_MEDIA_FMT_VOC_HALF_RATE |
| 4855 | * - #ASM_MEDIA_FMT_VOC_FULL_RATE |
| 4856 | */ |
| 4857 | |
| 4858 | u16 reduced_rate_cmd; |
| 4859 | /* Reduced rate command, used to change |
| 4860 | * the average bitrate of the V13K |
| 4861 | * vocoder. |
| 4862 | * Supported values: |
| 4863 | * - #ASM_MEDIA_FMT_V13K_FS_ENCODE_MODE_MR1440 (Default) |
| 4864 | * - #ASM_MEDIA_FMT_V13K_FS_ENCODE_MODE_MR1220 |
| 4865 | * - #ASM_MEDIA_FMT_V13K_FS_ENCODE_MODE_MR1120 |
| 4866 | * - #ASM_MEDIA_FMT_V13K_FS_ENCODE_MODE_MR90 |
| 4867 | * - #ASM_MEDIA_FMT_V13K_FS_ENCODE_MODE_MR720 |
| 4868 | */ |
| 4869 | |
| 4870 | u16 rate_mod_cmd; |
| 4871 | /* Rate modulation command. Default = 0. |
| 4872 | *- If bit 0=1, rate control is enabled. |
| 4873 | *- If bit 1=1, the maximum number of consecutive full rate |
| 4874 | * frames is limited with numbers supplied in |
| 4875 | * bits 2 to 10. |
| 4876 | *- If bit 1=0, the minimum number of non-full rate frames |
| 4877 | * in between two full rate frames is forced to |
| 4878 | * the number supplied in bits 2 to 10. In both cases, if necessary, |
| 4879 | * half rate is used to substitute full rate. - Bits 15 to 10 are |
| 4880 | * reserved and must all be set to zero. |
| 4881 | */ |
| 4882 | |
| 4883 | } __packed; |
| 4884 | |
| 4885 | #define ASM_MEDIA_FMT_EVRC_FS 0x00010BEE |
| 4886 | |
| 4887 | /* EVRC encoder configuration structure used in the |
| 4888 | * #ASM_PARAM_ID_ENCDEC_ENC_CFG_BLK_V2 command. |
| 4889 | */ |
| 4890 | struct asm_evrc_enc_cfg { |
| 4891 | struct apr_hdr hdr; |
| 4892 | struct asm_stream_cmd_set_encdec_param encdec; |
| 4893 | struct asm_enc_cfg_blk_param_v2 encblk; |
| 4894 | u16 max_rate; |
| 4895 | /* Maximum allowed encoder frame rate. |
| 4896 | * Supported values: |
| 4897 | * - #ASM_MEDIA_FMT_VOC_ONE_EIGHTH_RATE |
| 4898 | * - #ASM_MEDIA_FMT_VOC_ONE_FOURTH_RATE |
| 4899 | * - #ASM_MEDIA_FMT_VOC_HALF_RATE |
| 4900 | * - #ASM_MEDIA_FMT_VOC_FULL_RATE |
| 4901 | */ |
| 4902 | |
| 4903 | u16 min_rate; |
| 4904 | /* Minimum allowed encoder frame rate. |
| 4905 | * Supported values: |
| 4906 | * - #ASM_MEDIA_FMT_VOC_ONE_EIGHTH_RATE |
| 4907 | * - #ASM_MEDIA_FMT_VOC_ONE_FOURTH_RATE |
| 4908 | * - #ASM_MEDIA_FMT_VOC_HALF_RATE |
| 4909 | * - #ASM_MEDIA_FMT_VOC_FULL_RATE |
| 4910 | */ |
| 4911 | |
| 4912 | u16 rate_mod_cmd; |
| 4913 | /* Rate modulation command. Default: 0. |
| 4914 | * - If bit 0=1, rate control is enabled. |
| 4915 | * - If bit 1=1, the maximum number of consecutive full rate frames |
| 4916 | * is limited with numbers supplied in bits 2 to 10. |
| 4917 | * |
| 4918 | * - If bit 1=0, the minimum number of non-full rate frames in |
| 4919 | * between two full rate frames is forced to the number supplied in |
| 4920 | * bits 2 to 10. In both cases, if necessary, half rate is used to |
| 4921 | * substitute full rate. |
| 4922 | * |
| 4923 | * - Bits 15 to 10 are reserved and must all be set to zero. |
| 4924 | */ |
| 4925 | |
| 4926 | u16 reserved; |
| 4927 | /* Reserved. Clients must set this field to zero. */ |
| 4928 | } __packed; |
| 4929 | |
| 4930 | #define ASM_MEDIA_FMT_WMA_V10PRO_V2 0x00010DA7 |
| 4931 | |
| 4932 | struct asm_wmaprov10_fmt_blk_v2 { |
| 4933 | struct apr_hdr hdr; |
| 4934 | struct asm_data_cmd_media_fmt_update_v2 fmtblk; |
| 4935 | |
| 4936 | u16 fmtag; |
| 4937 | /* WMA format type. |
| 4938 | * Supported values: |
| 4939 | * - 0x162 -- WMA 9 Pro |
| 4940 | * - 0x163 -- WMA 9 Pro Lossless |
| 4941 | * - 0x166 -- WMA 10 Pro |
| 4942 | * - 0x167 -- WMA 10 Pro Lossless |
| 4943 | */ |
| 4944 | |
| 4945 | u16 num_channels; |
| 4946 | /* Number of channels encoded in the input stream. |
| 4947 | * Supported values: 1 to 8 |
| 4948 | */ |
| 4949 | |
| 4950 | u32 sample_rate; |
| 4951 | /* Number of samples per second (in Hertz). |
| 4952 | * Supported values: 11025, 16000, 22050, 32000, 44100, 48000, |
| 4953 | * 88200, 96000 |
| 4954 | */ |
| 4955 | |
| 4956 | u32 avg_bytes_per_sec; |
| 4957 | /* Bitrate expressed as the average bytes per second. |
| 4958 | * Supported values: 2000 to 96000 |
| 4959 | */ |
| 4960 | |
| 4961 | u16 blk_align; |
| 4962 | /* Size of the bitstream packet size in bytes. WMA Pro files |
| 4963 | * have a payload of one block per bitstream packet. |
| 4964 | * Supported values: @le 13376 |
| 4965 | */ |
| 4966 | |
| 4967 | u16 bits_per_sample; |
| 4968 | /* Number of bits per sample in the encoded WMA stream. |
| 4969 | * Supported values: 16, 24 |
| 4970 | */ |
| 4971 | |
| 4972 | u32 channel_mask; |
| 4973 | /* Bit-packed double word (32-bits) that indicates the |
| 4974 | * recommended speaker positions for each source channel. |
| 4975 | */ |
| 4976 | |
| 4977 | u16 enc_options; |
| 4978 | /* Bit-packed word with values that indicate whether certain |
| 4979 | * features of the bitstream are used. |
| 4980 | * Supported values: - 0x0001 -- ENCOPT3_PURE_LOSSLESS - 0x0006 -- |
| 4981 | * ENCOPT3_FRM_SIZE_MOD - 0x0038 -- ENCOPT3_SUBFRM_DIV - 0x0040 -- |
| 4982 | * ENCOPT3_WRITE_FRAMESIZE_IN_HDR - 0x0080 -- |
| 4983 | * ENCOPT3_GENERATE_DRC_PARAMS - 0x0100 -- ENCOPT3_RTMBITS |
| 4984 | */ |
| 4985 | |
| 4986 | |
| 4987 | u16 usAdvancedEncodeOpt; |
| 4988 | /* Advanced encoding option. */ |
| 4989 | |
| 4990 | u32 advanced_enc_options2; |
| 4991 | /* Advanced encoding option 2. */ |
| 4992 | |
| 4993 | } __packed; |
| 4994 | |
| 4995 | #define ASM_MEDIA_FMT_WMA_V9_V2 0x00010DA8 |
| 4996 | struct asm_wmastdv9_fmt_blk_v2 { |
| 4997 | struct apr_hdr hdr; |
| 4998 | struct asm_data_cmd_media_fmt_update_v2 fmtblk; |
| 4999 | u16 fmtag; |
| 5000 | /* WMA format tag. |
| 5001 | * Supported values: 0x161 (WMA 9 standard) |
| 5002 | */ |
| 5003 | |
| 5004 | u16 num_channels; |
| 5005 | /* Number of channels in the stream. |
| 5006 | * Supported values: 1, 2 |
| 5007 | */ |
| 5008 | |
| 5009 | u32 sample_rate; |
| 5010 | /* Number of samples per second (in Hertz). |
| 5011 | * Supported values: 48000 |
| 5012 | */ |
| 5013 | |
| 5014 | u32 avg_bytes_per_sec; |
| 5015 | /* Bitrate expressed as the average bytes per second. */ |
| 5016 | |
| 5017 | u16 blk_align; |
| 5018 | /* Block align. All WMA files with a maximum packet size of |
| 5019 | * 13376 are supported. |
| 5020 | */ |
| 5021 | |
| 5022 | |
| 5023 | u16 bits_per_sample; |
| 5024 | /* Number of bits per sample in the output. |
| 5025 | * Supported values: 16 |
| 5026 | */ |
| 5027 | |
| 5028 | u32 channel_mask; |
| 5029 | /* Channel mask. |
| 5030 | * Supported values: |
| 5031 | * - 3 -- Stereo (front left/front right) |
| 5032 | * - 4 -- Mono (center) |
| 5033 | */ |
| 5034 | |
| 5035 | u16 enc_options; |
| 5036 | /* Options used during encoding. */ |
| 5037 | |
| 5038 | u16 reserved; |
| 5039 | |
| 5040 | } __packed; |
| 5041 | |
| 5042 | #define ASM_MEDIA_FMT_WMA_V8 0x00010D91 |
| 5043 | |
| 5044 | struct asm_wmastdv8_enc_cfg { |
| 5045 | struct apr_hdr hdr; |
| 5046 | struct asm_stream_cmd_set_encdec_param encdec; |
| 5047 | struct asm_enc_cfg_blk_param_v2 encblk; |
| 5048 | u32 bit_rate; |
| 5049 | /* Encoding rate in bits per second. */ |
| 5050 | |
| 5051 | u32 sample_rate; |
| 5052 | /* Number of samples per second. |
| 5053 | * |
| 5054 | * Supported values: |
| 5055 | * - 0 -- Native mode |
| 5056 | * - Other Supported values are 22050, 32000, 44100, and 48000. |
| 5057 | * |
| 5058 | * Native mode indicates that encoding must be performed with the |
| 5059 | * sampling rate at the input. |
| 5060 | * The sampling rate must not change during encoding. |
| 5061 | */ |
| 5062 | |
| 5063 | u16 channel_cfg; |
| 5064 | /* Number of channels to encode. |
| 5065 | * Supported values: |
| 5066 | * - 0 -- Native mode |
| 5067 | * - 1 -- Mono |
| 5068 | * - 2 -- Stereo |
| 5069 | * - Other values are not supported. |
| 5070 | * |
| 5071 | * Native mode indicates that encoding must be performed with the |
| 5072 | * number of channels at the input. |
| 5073 | * The number of channels must not change during encoding. |
| 5074 | */ |
| 5075 | |
| 5076 | u16 reserved; |
| 5077 | /* Reserved. Clients must set this field to zero.*/ |
| 5078 | } __packed; |
| 5079 | |
| 5080 | #define ASM_MEDIA_FMT_AMR_WB_PLUS_V2 0x00010DA9 |
| 5081 | |
| 5082 | struct asm_amrwbplus_fmt_blk_v2 { |
| 5083 | struct apr_hdr hdr; |
| 5084 | struct asm_data_cmd_media_fmt_update_v2 fmtblk; |
| 5085 | u32 amr_frame_fmt; |
| 5086 | /* AMR frame format. |
| 5087 | * Supported values: |
| 5088 | * - 6 -- Transport Interface Format (TIF) |
| 5089 | * - Any other value -- File storage format (FSF) |
| 5090 | * |
| 5091 | * TIF stream contains 2-byte header for each frame within the |
| 5092 | * superframe. FSF stream contains one 2-byte header per superframe. |
| 5093 | */ |
| 5094 | |
| 5095 | } __packed; |
| 5096 | |
| 5097 | #define ASM_MEDIA_FMT_AC3 0x00010DEE |
| 5098 | #define ASM_MEDIA_FMT_EAC3 0x00010DEF |
| 5099 | #define ASM_MEDIA_FMT_DTS 0x00010D88 |
| 5100 | #define ASM_MEDIA_FMT_MP2 0x00010DE9 |
| 5101 | #define ASM_MEDIA_FMT_FLAC 0x00010C16 |
| 5102 | #define ASM_MEDIA_FMT_ALAC 0x00012F31 |
| 5103 | #define ASM_MEDIA_FMT_VORBIS 0x00010C15 |
| 5104 | #define ASM_MEDIA_FMT_APE 0x00012F32 |
| 5105 | #define ASM_MEDIA_FMT_DSD 0x00012F3E |
| 5106 | #define ASM_MEDIA_FMT_TRUEHD 0x00013215 |
| 5107 | /* 0x0 is used for fomat ID since ADSP dynamically determines the |
| 5108 | * format encapsulated in the IEC61937 (compressed) or IEC60958 |
| 5109 | * (pcm) packets. |
| 5110 | */ |
| 5111 | #define ASM_MEDIA_FMT_IEC 0x00000000 |
| 5112 | |
| 5113 | /* Media format ID for adaptive transform acoustic coding. This |
| 5114 | * ID is used by the #ASM_STREAM_CMD_OPEN_WRITE_COMPRESSED command |
| 5115 | * only. |
| 5116 | */ |
| 5117 | |
| 5118 | #define ASM_MEDIA_FMT_ATRAC 0x00010D89 |
| 5119 | |
| 5120 | /* Media format ID for metadata-enhanced audio transmission. |
| 5121 | * This ID is used by the #ASM_STREAM_CMD_OPEN_WRITE_COMPRESSED |
| 5122 | * command only. |
| 5123 | */ |
| 5124 | |
| 5125 | #define ASM_MEDIA_FMT_MAT 0x00010D8A |
| 5126 | |
| 5127 | /* adsp_media_fmt.h */ |
| 5128 | |
| 5129 | #define ASM_DATA_CMD_WRITE_V2 0x00010DAB |
| 5130 | |
| 5131 | struct asm_data_cmd_write_v2 { |
| 5132 | struct apr_hdr hdr; |
| 5133 | u32 buf_addr_lsw; |
| 5134 | /* The 64 bit address msw-lsw should be a valid, mapped address. |
| 5135 | * 64 bit address should be a multiple of 32 bytes |
| 5136 | */ |
| 5137 | |
| 5138 | u32 buf_addr_msw; |
| 5139 | /* The 64 bit address msw-lsw should be a valid, mapped address. |
| 5140 | * 64 bit address should be a multiple of 32 bytes. |
| 5141 | * -Address of the buffer containing the data to be decoded. |
| 5142 | * The buffer should be aligned to a 32 byte boundary. |
| 5143 | * -In the case of 32 bit Shared memory address, msw field must |
| 5144 | * -be set to zero. |
| 5145 | * -In the case of 36 bit shared memory address, bit 31 to bit 4 |
| 5146 | * -of msw must be set to zero. |
| 5147 | */ |
| 5148 | u32 mem_map_handle; |
| 5149 | /* memory map handle returned by DSP through |
| 5150 | * ASM_CMD_SHARED_MEM_MAP_REGIONS command |
| 5151 | */ |
| 5152 | u32 buf_size; |
| 5153 | /* Number of valid bytes available in the buffer for decoding. The |
| 5154 | * first byte starts at buf_addr. |
| 5155 | */ |
| 5156 | |
| 5157 | u32 seq_id; |
| 5158 | /* Optional buffer sequence ID. */ |
| 5159 | |
| 5160 | u32 timestamp_lsw; |
| 5161 | /* Lower 32 bits of the 64-bit session time in microseconds of the |
| 5162 | * first buffer sample. |
| 5163 | */ |
| 5164 | |
| 5165 | u32 timestamp_msw; |
| 5166 | /* Upper 32 bits of the 64-bit session time in microseconds of the |
| 5167 | * first buffer sample. |
| 5168 | */ |
| 5169 | |
| 5170 | u32 flags; |
| 5171 | /* Bitfield of flags. |
| 5172 | * Supported values for bit 31: |
| 5173 | * - 1 -- Valid timestamp. |
| 5174 | * - 0 -- Invalid timestamp. |
| 5175 | * - Use #ASM_BIT_MASKIMESTAMP_VALID_FLAG as the bitmask and |
| 5176 | * #ASM_SHIFTIMESTAMP_VALID_FLAG as the shift value to set this bit. |
| 5177 | * Supported values for bit 30: |
| 5178 | * - 1 -- Last buffer. |
| 5179 | * - 0 -- Not the last buffer. |
| 5180 | * |
| 5181 | * Supported values for bit 29: |
| 5182 | * - 1 -- Continue the timestamp from the previous buffer. |
| 5183 | * - 0 -- Timestamp of the current buffer is not related |
| 5184 | * to the timestamp of the previous buffer. |
| 5185 | * - Use #ASM_BIT_MASKS_CONTINUE_FLAG and #ASM_SHIFTS_CONTINUE_FLAG |
| 5186 | * to set this bit. |
| 5187 | * |
| 5188 | * Supported values for bit 4: |
| 5189 | * - 1 -- End of the frame. |
| 5190 | * - 0 -- Not the end of frame, or this information is not known. |
| 5191 | * - Use #ASM_BIT_MASK_EOF_FLAG as the bitmask and #ASM_SHIFT_EOF_FLAG |
| 5192 | * as the shift value to set this bit. |
| 5193 | * |
| 5194 | * All other bits are reserved and must be set to 0. |
| 5195 | * |
| 5196 | * If bit 31=0 and bit 29=1: The timestamp of the first sample in |
| 5197 | * this buffer continues from the timestamp of the last sample in |
| 5198 | * the previous buffer. If there is no previous buffer (i.e., this |
| 5199 | * is the first buffer sent after opening the stream or after a |
| 5200 | * flush operation), or if the previous buffer does not have a valid |
| 5201 | * timestamp, the samples in the current buffer also do not have a |
| 5202 | * valid timestamp. They are played out as soon as possible. |
| 5203 | * |
| 5204 | * |
| 5205 | * If bit 31=0 and bit 29=0: No timestamp is associated with the |
| 5206 | * first sample in this buffer. The samples are played out as soon |
| 5207 | * as possible. |
| 5208 | * |
| 5209 | * |
| 5210 | * If bit 31=1 and bit 29 is ignored: The timestamp specified in |
| 5211 | * this payload is honored. |
| 5212 | * |
| 5213 | * |
| 5214 | * If bit 30=0: Not the last buffer in the stream. This is useful |
| 5215 | * in removing trailing samples. |
| 5216 | * |
| 5217 | * |
| 5218 | * For bit 4: The client can set this flag for every buffer sent in |
| 5219 | * which the last byte is the end of a frame. If this flag is set, |
| 5220 | * the buffer can contain data from multiple frames, but it should |
| 5221 | * always end at a frame boundary. Restrictions allow the aDSP to |
| 5222 | * detect an end of frame without requiring additional processing. |
| 5223 | */ |
| 5224 | |
| 5225 | } __packed; |
| 5226 | |
| 5227 | #define ASM_DATA_CMD_READ_V2 0x00010DAC |
| 5228 | |
| 5229 | struct asm_data_cmd_read_v2 { |
| 5230 | struct apr_hdr hdr; |
| 5231 | u32 buf_addr_lsw; |
| 5232 | /* the 64 bit address msw-lsw should be a valid mapped address |
| 5233 | * and should be a multiple of 32 bytes |
| 5234 | */ |
| 5235 | |
| 5236 | |
| 5237 | u32 buf_addr_msw; |
| 5238 | /* the 64 bit address msw-lsw should be a valid mapped address |
| 5239 | * and should be a multiple of 32 bytes. |
| 5240 | * - Address of the buffer where the DSP puts the encoded data, |
| 5241 | * potentially, at an offset specified by the uOffset field in |
| 5242 | * ASM_DATA_EVENT_READ_DONE structure. The buffer should be aligned |
| 5243 | * to a 32 byte boundary. |
| 5244 | * - In the case of 32 bit Shared memory address, msw field must |
| 5245 | * - be set to zero. |
| 5246 | * - In the case of 36 bit shared memory address, bit 31 to bit |
| 5247 | * - 4 of msw must be set to zero. |
| 5248 | */ |
| 5249 | u32 mem_map_handle; |
| 5250 | /* memory map handle returned by DSP through |
| 5251 | * ASM_CMD_SHARED_MEM_MAP_REGIONS command. |
| 5252 | */ |
| 5253 | |
| 5254 | u32 buf_size; |
| 5255 | /* Number of bytes available for the aDSP to write. The aDSP |
| 5256 | * starts writing from buf_addr. |
| 5257 | */ |
| 5258 | |
| 5259 | u32 seq_id; |
| 5260 | /* Optional buffer sequence ID. */ |
| 5261 | } __packed; |
| 5262 | |
| 5263 | #define ASM_DATA_CMD_EOS 0x00010BDB |
| 5264 | #define ASM_DATA_EVENT_RENDERED_EOS 0x00010C1C |
| 5265 | #define ASM_DATA_EVENT_EOS 0x00010BDD |
| 5266 | |
| 5267 | #define ASM_DATA_EVENT_WRITE_DONE_V2 0x00010D99 |
| 5268 | struct asm_data_event_write_done_v2 { |
| 5269 | u32 buf_addr_lsw; |
| 5270 | /* lsw of the 64 bit address */ |
| 5271 | u32 buf_addr_msw; |
| 5272 | /* msw of the 64 bit address. address given by the client in |
| 5273 | * ASM_DATA_CMD_WRITE_V2 command. |
| 5274 | */ |
| 5275 | u32 mem_map_handle; |
| 5276 | /* memory map handle in the ASM_DATA_CMD_WRITE_V2 */ |
| 5277 | |
| 5278 | u32 status; |
| 5279 | /* Status message (error code) that indicates whether the |
| 5280 | * referenced buffer has been successfully consumed. |
| 5281 | * Supported values: Refer to @xhyperref{Q3,[Q3]} |
| 5282 | */ |
| 5283 | } __packed; |
| 5284 | |
| 5285 | #define ASM_DATA_EVENT_READ_DONE_V2 0x00010D9A |
| 5286 | |
| 5287 | /* Definition of the frame metadata flag bitmask.*/ |
| 5288 | #define ASM_BIT_MASK_FRAME_METADATA_FLAG (0x40000000UL) |
| 5289 | |
| 5290 | /* Definition of the frame metadata flag shift value. */ |
| 5291 | #define ASM_SHIFT_FRAME_METADATA_FLAG 30 |
| 5292 | |
| 5293 | struct asm_data_event_read_done_v2 { |
| 5294 | u32 status; |
| 5295 | /* Status message (error code). |
| 5296 | * Supported values: Refer to @xhyperref{Q3,[Q3]} |
| 5297 | */ |
| 5298 | |
| 5299 | u32 buf_addr_lsw; |
| 5300 | /* 64 bit address msw-lsw is a valid, mapped address. 64 bit |
| 5301 | * address is a multiple of 32 bytes. |
| 5302 | */ |
| 5303 | |
| 5304 | u32 buf_addr_msw; |
| 5305 | /* 64 bit address msw-lsw is a valid, mapped address. 64 bit |
| 5306 | * address is a multiple of 32 bytes. |
| 5307 | * |
| 5308 | * -Same address provided by the client in ASM_DATA_CMD_READ_V2 |
| 5309 | * -In the case of 32 bit Shared memory address, msw field is set to |
| 5310 | * zero. |
| 5311 | * -In the case of 36 bit shared memory address, bit 31 to bit 4 |
| 5312 | * -of msw is set to zero. |
| 5313 | */ |
| 5314 | |
| 5315 | u32 mem_map_handle; |
| 5316 | /* memory map handle in the ASM_DATA_CMD_READ_V2 */ |
| 5317 | |
| 5318 | u32 enc_framesotal_size; |
| 5319 | /* Total size of the encoded frames in bytes. |
| 5320 | * Supported values: >0 |
| 5321 | */ |
| 5322 | |
| 5323 | u32 offset; |
| 5324 | /* Offset (from buf_addr) to the first byte of the first encoded |
| 5325 | * frame. All encoded frames are consecutive, starting from this |
| 5326 | * offset. |
| 5327 | * Supported values: > 0 |
| 5328 | */ |
| 5329 | |
| 5330 | u32 timestamp_lsw; |
| 5331 | /* Lower 32 bits of the 64-bit session time in microseconds of |
| 5332 | * the first sample in the buffer. If Bit 5 of mode_flags flag of |
| 5333 | * ASM_STREAM_CMD_OPEN_READ_V2 is 1 then the 64 bit timestamp is |
| 5334 | * absolute capture time otherwise it is relative session time. The |
| 5335 | * absolute timestamp doesn't reset unless the system is reset. |
| 5336 | */ |
| 5337 | |
| 5338 | |
| 5339 | u32 timestamp_msw; |
| 5340 | /* Upper 32 bits of the 64-bit session time in microseconds of |
| 5341 | * the first sample in the buffer. |
| 5342 | */ |
| 5343 | |
| 5344 | |
| 5345 | u32 flags; |
| 5346 | /* Bitfield of flags. Bit 30 indicates whether frame metadata is |
| 5347 | * present. If frame metadata is present, num_frames consecutive |
| 5348 | * instances of @xhyperref{hdr:FrameMetaData,Frame metadata} start |
| 5349 | * at the buffer address. |
| 5350 | * Supported values for bit 31: |
| 5351 | * - 1 -- Timestamp is valid. |
| 5352 | * - 0 -- Timestamp is invalid. |
| 5353 | * - Use #ASM_BIT_MASKIMESTAMP_VALID_FLAG and |
| 5354 | * #ASM_SHIFTIMESTAMP_VALID_FLAG to set this bit. |
| 5355 | * |
| 5356 | * Supported values for bit 30: |
| 5357 | * - 1 -- Frame metadata is present. |
| 5358 | * - 0 -- Frame metadata is absent. |
| 5359 | * - Use #ASM_BIT_MASK_FRAME_METADATA_FLAG and |
| 5360 | * #ASM_SHIFT_FRAME_METADATA_FLAG to set this bit. |
| 5361 | * |
| 5362 | * All other bits are reserved; the aDSP sets them to 0. |
| 5363 | */ |
| 5364 | |
| 5365 | u32 num_frames; |
| 5366 | /* Number of encoded frames in the buffer. */ |
| 5367 | |
| 5368 | u32 seq_id; |
| 5369 | /* Optional buffer sequence ID. */ |
| 5370 | } __packed; |
| 5371 | |
| 5372 | struct asm_data_read_buf_metadata_v2 { |
| 5373 | u32 offset; |
| 5374 | /* Offset from buf_addr in #ASM_DATA_EVENT_READ_DONE_PAYLOAD to |
| 5375 | * the frame associated with this metadata. |
| 5376 | * Supported values: > 0 |
| 5377 | */ |
| 5378 | |
| 5379 | u32 frm_size; |
| 5380 | /* Size of the encoded frame in bytes. |
| 5381 | * Supported values: > 0 |
| 5382 | */ |
| 5383 | |
| 5384 | u32 num_encoded_pcm_samples; |
| 5385 | /* Number of encoded PCM samples (per channel) in the frame |
| 5386 | * associated with this metadata. |
| 5387 | * Supported values: > 0 |
| 5388 | */ |
| 5389 | |
| 5390 | u32 timestamp_lsw; |
| 5391 | /* Lower 32 bits of the 64-bit session time in microseconds of the |
| 5392 | * first sample for this frame. |
| 5393 | * If Bit 5 of mode_flags flag of ASM_STREAM_CMD_OPEN_READ_V2 is 1 |
| 5394 | * then the 64 bit timestamp is absolute capture time otherwise it |
| 5395 | * is relative session time. The absolute timestamp doesn't reset |
| 5396 | * unless the system is reset. |
| 5397 | */ |
| 5398 | |
| 5399 | |
| 5400 | u32 timestamp_msw; |
| 5401 | /* Lower 32 bits of the 64-bit session time in microseconds of the |
| 5402 | * first sample for this frame. |
| 5403 | */ |
| 5404 | |
| 5405 | u32 flags; |
| 5406 | /* Frame flags. |
| 5407 | * Supported values for bit 31: |
| 5408 | * - 1 -- Time stamp is valid |
| 5409 | * - 0 -- Time stamp is not valid |
| 5410 | * - All other bits are reserved; the aDSP sets them to 0. |
| 5411 | */ |
| 5412 | } __packed; |
| 5413 | |
| 5414 | /* Notifies the client of a change in the data sampling rate or |
| 5415 | * Channel mode. This event is raised by the decoder service. The |
| 5416 | * event is enabled through the mode flags of |
| 5417 | * #ASM_STREAM_CMD_OPEN_WRITE_V2 or |
| 5418 | * #ASM_STREAM_CMD_OPEN_READWRITE_V2. - The decoder detects a change |
| 5419 | * in the output sampling frequency or the number/positioning of |
| 5420 | * output channels, or if it is the first frame decoded.The new |
| 5421 | * sampling frequency or the new channel configuration is |
| 5422 | * communicated back to the client asynchronously. |
| 5423 | */ |
| 5424 | |
| 5425 | #define ASM_DATA_EVENT_SR_CM_CHANGE_NOTIFY 0x00010C65 |
| 5426 | |
| 5427 | /* Payload of the #ASM_DATA_EVENT_SR_CM_CHANGE_NOTIFY event. |
| 5428 | * This event is raised when the following conditions are both true: |
| 5429 | * - The event is enabled through the mode_flags of |
| 5430 | * #ASM_STREAM_CMD_OPEN_WRITE_V2 or |
| 5431 | * #ASM_STREAM_CMD_OPEN_READWRITE_V2. - The decoder detects a change |
| 5432 | * in either the output sampling frequency or the number/positioning |
| 5433 | * of output channels, or if it is the first frame decoded. |
| 5434 | * This event is not raised (even if enabled) if the decoder is |
| 5435 | * MIDI, because |
| 5436 | */ |
| 5437 | |
| 5438 | |
| 5439 | struct asm_data_event_sr_cm_change_notify { |
| 5440 | u32 sample_rate; |
| 5441 | /* New sampling rate (in Hertz) after detecting a change in the |
| 5442 | * bitstream. |
| 5443 | * Supported values: 2000 to 48000 |
| 5444 | */ |
| 5445 | |
| 5446 | u16 num_channels; |
| 5447 | /* New number of channels after detecting a change in the |
| 5448 | * bitstream. |
| 5449 | * Supported values: 1 to 8 |
| 5450 | */ |
| 5451 | |
| 5452 | |
| 5453 | u16 reserved; |
| 5454 | /* Reserved for future use. This field must be set to 0.*/ |
| 5455 | |
| 5456 | u8 channel_mapping[8]; |
| 5457 | |
| 5458 | } __packed; |
| 5459 | |
| 5460 | /* Notifies the client of a data sampling rate or channel mode |
| 5461 | * change. This event is raised by the encoder service. |
| 5462 | * This event is raised when : |
| 5463 | * - Native mode encoding was requested in the encoder |
| 5464 | * configuration (i.e., the channel number was 0), the sample rate |
| 5465 | * was 0, or both were 0. |
| 5466 | * |
| 5467 | * - The input data frame at the encoder is the first one, or the |
| 5468 | * sampling rate/channel mode is different from the previous input |
| 5469 | * data frame. |
| 5470 | * |
| 5471 | */ |
| 5472 | #define ASM_DATA_EVENT_ENC_SR_CM_CHANGE_NOTIFY 0x00010BDE |
| 5473 | |
| 5474 | struct asm_data_event_enc_sr_cm_change_notify { |
| 5475 | u32 sample_rate; |
| 5476 | /* New sampling rate (in Hertz) after detecting a change in the |
| 5477 | * input data. |
| 5478 | * Supported values: 2000 to 48000 |
| 5479 | */ |
| 5480 | |
| 5481 | |
| 5482 | u16 num_channels; |
| 5483 | /* New number of channels after detecting a change in the input |
| 5484 | * data. Supported values: 1 to 8 |
| 5485 | */ |
| 5486 | |
| 5487 | |
| 5488 | u16 bits_per_sample; |
| 5489 | /* New bits per sample after detecting a change in the input |
| 5490 | * data. |
| 5491 | * Supported values: 16, 24 |
| 5492 | */ |
| 5493 | |
| 5494 | |
| 5495 | u8 channel_mapping[8]; |
| 5496 | |
| 5497 | } __packed; |
| 5498 | #define ASM_DATA_CMD_IEC_60958_FRAME_RATE 0x00010D87 |
| 5499 | |
| 5500 | |
| 5501 | /* Payload of the #ASM_DATA_CMD_IEC_60958_FRAME_RATE command, |
| 5502 | * which is used to indicate the IEC 60958 frame rate of a given |
| 5503 | * packetized audio stream. |
| 5504 | */ |
| 5505 | |
| 5506 | struct asm_data_cmd_iec_60958_frame_rate { |
| 5507 | u32 frame_rate; |
| 5508 | /* IEC 60958 frame rate of the incoming IEC 61937 packetized stream. |
| 5509 | * Supported values: Any valid frame rate |
| 5510 | */ |
| 5511 | } __packed; |
| 5512 | |
| 5513 | /* adsp_asm_data_commands.h*/ |
| 5514 | /* Definition of the stream ID bitmask.*/ |
| 5515 | #define ASM_BIT_MASK_STREAM_ID (0x000000FFUL) |
| 5516 | |
| 5517 | /* Definition of the stream ID shift value.*/ |
| 5518 | #define ASM_SHIFT_STREAM_ID 0 |
| 5519 | |
| 5520 | /* Definition of the session ID bitmask.*/ |
| 5521 | #define ASM_BIT_MASK_SESSION_ID (0x0000FF00UL) |
| 5522 | |
| 5523 | /* Definition of the session ID shift value.*/ |
| 5524 | #define ASM_SHIFT_SESSION_ID 8 |
| 5525 | |
| 5526 | /* Definition of the service ID bitmask.*/ |
| 5527 | #define ASM_BIT_MASK_SERVICE_ID (0x00FF0000UL) |
| 5528 | |
| 5529 | /* Definition of the service ID shift value.*/ |
| 5530 | #define ASM_SHIFT_SERVICE_ID 16 |
| 5531 | |
| 5532 | /* Definition of the domain ID bitmask.*/ |
| 5533 | #define ASM_BIT_MASK_DOMAIN_ID (0xFF000000UL) |
| 5534 | |
| 5535 | /* Definition of the domain ID shift value.*/ |
| 5536 | #define ASM_SHIFT_DOMAIN_ID 24 |
| 5537 | |
| 5538 | #define ASM_CMD_SHARED_MEM_MAP_REGIONS 0x00010D92 |
| 5539 | #define ASM_CMDRSP_SHARED_MEM_MAP_REGIONS 0x00010D93 |
| 5540 | #define ASM_CMD_SHARED_MEM_UNMAP_REGIONS 0x00010D94 |
| 5541 | |
| 5542 | /* adsp_asm_service_commands.h */ |
| 5543 | |
| 5544 | #define ASM_MAX_SESSION_ID (15) |
| 5545 | |
| 5546 | /* Maximum number of sessions.*/ |
| 5547 | #define ASM_MAX_NUM_SESSIONS ASM_MAX_SESSION_ID |
| 5548 | |
| 5549 | /* Maximum number of streams per session.*/ |
| 5550 | #define ASM_MAX_STREAMS_PER_SESSION (8) |
| 5551 | #define ASM_SESSION_CMD_RUN_V2 0x00010DAA |
| 5552 | #define ASM_SESSION_CMD_RUN_STARTIME_RUN_IMMEDIATE 0 |
| 5553 | #define ASM_SESSION_CMD_RUN_STARTIME_RUN_AT_ABSOLUTEIME 1 |
| 5554 | #define ASM_SESSION_CMD_RUN_STARTIME_RUN_AT_RELATIVEIME 2 |
| 5555 | #define ASM_SESSION_CMD_RUN_STARTIME_RUN_WITH_DELAY 3 |
| 5556 | |
| 5557 | #define ASM_BIT_MASK_RUN_STARTIME (0x00000003UL) |
| 5558 | |
| 5559 | /* Bit shift value used to specify the start time for the |
| 5560 | * ASM_SESSION_CMD_RUN_V2 command. |
| 5561 | */ |
| 5562 | #define ASM_SHIFT_RUN_STARTIME 0 |
| 5563 | struct asm_session_cmd_run_v2 { |
| 5564 | struct apr_hdr hdr; |
| 5565 | u32 flags; |
| 5566 | /* Specifies whether to run immediately or at a specific |
| 5567 | * rendering time or with a specified delay. Run with delay is |
| 5568 | * useful for delaying in case of ASM loopback opened through |
| 5569 | * ASM_STREAM_CMD_OPEN_LOOPBACK_V2. Use #ASM_BIT_MASK_RUN_STARTIME |
| 5570 | * and #ASM_SHIFT_RUN_STARTIME to set this 2-bit flag. |
| 5571 | * |
| 5572 | * |
| 5573 | *Bits 0 and 1 can take one of four possible values: |
| 5574 | * |
| 5575 | *- #ASM_SESSION_CMD_RUN_STARTIME_RUN_IMMEDIATE |
| 5576 | *- #ASM_SESSION_CMD_RUN_STARTIME_RUN_AT_ABSOLUTEIME |
| 5577 | *- #ASM_SESSION_CMD_RUN_STARTIME_RUN_AT_RELATIVEIME |
| 5578 | *- #ASM_SESSION_CMD_RUN_STARTIME_RUN_WITH_DELAY |
| 5579 | * |
| 5580 | *All other bits are reserved; clients must set them to zero. |
| 5581 | */ |
| 5582 | |
| 5583 | u32 time_lsw; |
| 5584 | /* Lower 32 bits of the time in microseconds used to align the |
| 5585 | * session origin time. When bits 0-1 of flags is |
| 5586 | * ASM_SESSION_CMD_RUN_START_RUN_WITH_DELAY, time lsw is the lsw of |
| 5587 | * the delay in us. For ASM_SESSION_CMD_RUN_START_RUN_WITH_DELAY, |
| 5588 | * maximum value of the 64 bit delay is 150 ms. |
| 5589 | */ |
| 5590 | |
| 5591 | u32 time_msw; |
| 5592 | /* Upper 32 bits of the time in microseconds used to align the |
| 5593 | * session origin time. When bits 0-1 of flags is |
| 5594 | * ASM_SESSION_CMD_RUN_START_RUN_WITH_DELAY, time msw is the msw of |
| 5595 | * the delay in us. For ASM_SESSION_CMD_RUN_START_RUN_WITH_DELAY, |
| 5596 | * maximum value of the 64 bit delay is 150 ms. |
| 5597 | */ |
| 5598 | |
| 5599 | } __packed; |
| 5600 | |
| 5601 | #define ASM_SESSION_CMD_PAUSE 0x00010BD3 |
| 5602 | #define ASM_SESSION_CMD_SUSPEND 0x00010DEC |
| 5603 | #define ASM_SESSION_CMD_GET_SESSIONTIME_V3 0x00010D9D |
| 5604 | #define ASM_SESSION_CMD_REGISTER_FOR_RX_UNDERFLOW_EVENTS 0x00010BD5 |
| 5605 | |
| 5606 | struct asm_session_cmd_rgstr_rx_underflow { |
| 5607 | struct apr_hdr hdr; |
| 5608 | u16 enable_flag; |
| 5609 | /* Specifies whether a client is to receive events when an Rx |
| 5610 | * session underflows. |
| 5611 | * Supported values: |
| 5612 | * - 0 -- Do not send underflow events |
| 5613 | * - 1 -- Send underflow events |
| 5614 | */ |
| 5615 | u16 reserved; |
| 5616 | /* Reserved. This field must be set to zero.*/ |
| 5617 | } __packed; |
| 5618 | |
| 5619 | #define ASM_SESSION_CMD_REGISTER_FORX_OVERFLOW_EVENTS 0x00010BD6 |
| 5620 | |
| 5621 | struct asm_session_cmd_regx_overflow { |
| 5622 | struct apr_hdr hdr; |
| 5623 | u16 enable_flag; |
| 5624 | /* Specifies whether a client is to receive events when a Tx |
| 5625 | * session overflows. |
| 5626 | * Supported values: |
| 5627 | * - 0 -- Do not send overflow events |
| 5628 | * - 1 -- Send overflow events |
| 5629 | */ |
| 5630 | |
| 5631 | u16 reserved; |
| 5632 | /* Reserved. This field must be set to zero.*/ |
| 5633 | } __packed; |
| 5634 | |
| 5635 | #define ASM_SESSION_EVENT_RX_UNDERFLOW 0x00010C17 |
| 5636 | #define ASM_SESSION_EVENTX_OVERFLOW 0x00010C18 |
| 5637 | #define ASM_SESSION_CMDRSP_GET_SESSIONTIME_V3 0x00010D9E |
| 5638 | |
| 5639 | struct asm_session_cmdrsp_get_sessiontime_v3 { |
| 5640 | u32 status; |
| 5641 | /* Status message (error code). |
| 5642 | * Supported values: Refer to @xhyperref{Q3,[Q3]} |
| 5643 | */ |
| 5644 | |
| 5645 | u32 sessiontime_lsw; |
| 5646 | /* Lower 32 bits of the current session time in microseconds.*/ |
| 5647 | |
| 5648 | u32 sessiontime_msw; |
| 5649 | /* Upper 32 bits of the current session time in microseconds.*/ |
| 5650 | |
| 5651 | u32 absolutetime_lsw; |
| 5652 | /* Lower 32 bits in micro seconds of the absolute time at which |
| 5653 | * the * sample corresponding to the above session time gets |
| 5654 | * rendered * to hardware. This absolute time may be slightly in the |
| 5655 | * future or past. |
| 5656 | */ |
| 5657 | |
| 5658 | |
| 5659 | u32 absolutetime_msw; |
| 5660 | /* Upper 32 bits in micro seconds of the absolute time at which |
| 5661 | * the * sample corresponding to the above session time gets |
| 5662 | * rendered to * hardware. This absolute time may be slightly in the |
| 5663 | * future or past. |
| 5664 | */ |
| 5665 | |
| 5666 | } __packed; |
| 5667 | |
| 5668 | #define ASM_SESSION_CMD_ADJUST_SESSION_CLOCK_V2 0x00010D9F |
| 5669 | |
| 5670 | struct asm_session_cmd_adjust_session_clock_v2 { |
| 5671 | struct apr_hdr hdr; |
| 5672 | u32 adjustime_lsw; |
| 5673 | /* Lower 32 bits of the signed 64-bit quantity that specifies the |
| 5674 | * adjustment time in microseconds to the session clock. |
| 5675 | * |
| 5676 | * Positive values indicate advancement of the session clock. |
| 5677 | * Negative values indicate delay of the session clock. |
| 5678 | */ |
| 5679 | |
| 5680 | |
| 5681 | u32 adjustime_msw; |
| 5682 | /* Upper 32 bits of the signed 64-bit quantity that specifies |
| 5683 | * the adjustment time in microseconds to the session clock. |
| 5684 | * Positive values indicate advancement of the session clock. |
| 5685 | * Negative values indicate delay of the session clock. |
| 5686 | */ |
| 5687 | |
| 5688 | } __packed; |
| 5689 | |
| 5690 | #define ASM_SESSION_CMDRSP_ADJUST_SESSION_CLOCK_V2 0x00010DA0 |
| 5691 | |
| 5692 | struct asm_session_cmdrsp_adjust_session_clock_v2 { |
| 5693 | u32 status; |
| 5694 | /* Status message (error code). |
| 5695 | * Supported values: Refer to @xhyperref{Q3,[Q3]} |
| 5696 | * An error means the session clock is not adjusted. In this case, |
| 5697 | * the next two fields are irrelevant. |
| 5698 | */ |
| 5699 | |
| 5700 | |
| 5701 | u32 actual_adjustime_lsw; |
| 5702 | /* Lower 32 bits of the signed 64-bit quantity that specifies |
| 5703 | * the actual adjustment in microseconds performed by the aDSP. |
| 5704 | * A positive value indicates advancement of the session clock. A |
| 5705 | * negative value indicates delay of the session clock. |
| 5706 | */ |
| 5707 | |
| 5708 | |
| 5709 | u32 actual_adjustime_msw; |
| 5710 | /* Upper 32 bits of the signed 64-bit quantity that specifies |
| 5711 | * the actual adjustment in microseconds performed by the aDSP. |
| 5712 | * A positive value indicates advancement of the session clock. A |
| 5713 | * negative value indicates delay of the session clock. |
| 5714 | */ |
| 5715 | |
| 5716 | |
| 5717 | u32 cmd_latency_lsw; |
| 5718 | /* Lower 32 bits of the unsigned 64-bit quantity that specifies |
| 5719 | * the amount of time in microseconds taken to perform the session |
| 5720 | * clock adjustment. |
| 5721 | */ |
| 5722 | |
| 5723 | |
| 5724 | u32 cmd_latency_msw; |
| 5725 | /* Upper 32 bits of the unsigned 64-bit quantity that specifies |
| 5726 | * the amount of time in microseconds taken to perform the session |
| 5727 | * clock adjustment. |
| 5728 | */ |
| 5729 | |
| 5730 | } __packed; |
| 5731 | |
| 5732 | #define ASM_SESSION_CMD_GET_PATH_DELAY_V2 0x00010DAF |
| 5733 | #define ASM_SESSION_CMDRSP_GET_PATH_DELAY_V2 0x00010DB0 |
| 5734 | |
| 5735 | struct asm_session_cmdrsp_get_path_delay_v2 { |
| 5736 | u32 status; |
| 5737 | /* Status message (error code). Whether this get delay operation |
| 5738 | * is successful or not. Delay value is valid only if status is |
| 5739 | * success. |
| 5740 | * Supported values: Refer to @xhyperref{Q5,[Q5]} |
| 5741 | */ |
| 5742 | |
| 5743 | u32 audio_delay_lsw; |
| 5744 | /* Upper 32 bits of the aDSP delay in microseconds. */ |
| 5745 | |
| 5746 | u32 audio_delay_msw; |
| 5747 | /* Lower 32 bits of the aDSP delay in microseconds. */ |
| 5748 | |
| 5749 | } __packed; |
| 5750 | |
| 5751 | /* adsp_asm_session_command.h*/ |
| 5752 | #define ASM_STREAM_CMD_OPEN_WRITE_V3 0x00010DB3 |
| 5753 | |
| 5754 | #define ASM_LOW_LATENCY_STREAM_SESSION 0x10000000 |
| 5755 | |
| 5756 | #define ASM_ULTRA_LOW_LATENCY_STREAM_SESSION 0x20000000 |
| 5757 | |
| 5758 | #define ASM_ULL_POST_PROCESSING_STREAM_SESSION 0x40000000 |
| 5759 | |
| 5760 | #define ASM_LEGACY_STREAM_SESSION 0 |
| 5761 | |
| 5762 | |
| 5763 | struct asm_stream_cmd_open_write_v3 { |
| 5764 | struct apr_hdr hdr; |
| 5765 | uint32_t mode_flags; |
| 5766 | /* Mode flags that configure the stream to notify the client |
| 5767 | * whenever it detects an SR/CM change at the input to its POPP. |
| 5768 | * Supported values for bits 0 to 1: |
| 5769 | * - Reserved; clients must set them to zero. |
| 5770 | * Supported values for bit 2: |
| 5771 | * - 0 -- SR/CM change notification event is disabled. |
| 5772 | * - 1 -- SR/CM change notification event is enabled. |
| 5773 | * - Use #ASM_BIT_MASK_SR_CM_CHANGE_NOTIFY_FLAG and |
| 5774 | * #ASM_SHIFT_SR_CM_CHANGE_NOTIFY_FLAG to set or get this bit. |
| 5775 | * |
| 5776 | * Supported values for bit 31: |
| 5777 | * - 0 -- Stream to be opened in on-Gapless mode. |
| 5778 | * - 1 -- Stream to be opened in Gapless mode. In Gapless mode, |
| 5779 | * successive streams must be opened with same session ID but |
| 5780 | * different stream IDs. |
| 5781 | * |
| 5782 | * - Use #ASM_BIT_MASK_GAPLESS_MODE_FLAG and |
| 5783 | * #ASM_SHIFT_GAPLESS_MODE_FLAG to set or get this bit. |
| 5784 | * |
| 5785 | * |
| 5786 | * @note1hang MIDI and DTMF streams cannot be opened in Gapless mode. |
| 5787 | */ |
| 5788 | |
| 5789 | uint16_t sink_endpointype; |
| 5790 | /*< Sink point type. |
| 5791 | * Supported values: |
| 5792 | * - 0 -- Device matrix |
| 5793 | * - Other values are reserved. |
| 5794 | * |
| 5795 | * The device matrix is the gateway to the hardware ports. |
| 5796 | */ |
| 5797 | |
| 5798 | uint16_t bits_per_sample; |
| 5799 | /*< Number of bits per sample processed by ASM modules. |
| 5800 | * Supported values: 16 and 24 bits per sample |
| 5801 | */ |
| 5802 | |
| 5803 | uint32_t postprocopo_id; |
| 5804 | /*< Specifies the topology (order of processing) of |
| 5805 | * postprocessing algorithms. <i>None</i> means no postprocessing. |
| 5806 | * Supported values: |
| 5807 | * - #ASM_STREAM_POSTPROCOPO_ID_DEFAULT |
| 5808 | * - #ASM_STREAM_POSTPROCOPO_ID_MCH_PEAK_VOL |
| 5809 | * - #ASM_STREAM_POSTPROCOPO_ID_NONE |
| 5810 | * |
| 5811 | * This field can also be enabled through SetParams flags. |
| 5812 | */ |
| 5813 | |
| 5814 | uint32_t dec_fmt_id; |
| 5815 | /*< Configuration ID of the decoder media format. |
| 5816 | * |
| 5817 | * Supported values: |
| 5818 | * - #ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V2 |
| 5819 | * - #ASM_MEDIA_FMT_ADPCM |
| 5820 | * - #ASM_MEDIA_FMT_MP3 |
| 5821 | * - #ASM_MEDIA_FMT_AAC_V2 |
| 5822 | * - #ASM_MEDIA_FMT_DOLBY_AAC |
| 5823 | * - #ASM_MEDIA_FMT_AMRNB_FS |
| 5824 | * - #ASM_MEDIA_FMT_AMRWB_FS |
| 5825 | * - #ASM_MEDIA_FMT_AMR_WB_PLUS_V2 |
| 5826 | * - #ASM_MEDIA_FMT_V13K_FS |
| 5827 | * - #ASM_MEDIA_FMT_EVRC_FS |
| 5828 | * - #ASM_MEDIA_FMT_EVRCB_FS |
| 5829 | * - #ASM_MEDIA_FMT_EVRCWB_FS |
| 5830 | * - #ASM_MEDIA_FMT_SBC |
| 5831 | * - #ASM_MEDIA_FMT_WMA_V10PRO_V2 |
| 5832 | * - #ASM_MEDIA_FMT_WMA_V9_V2 |
| 5833 | * - #ASM_MEDIA_FMT_AC3 |
| 5834 | * - #ASM_MEDIA_FMT_EAC3 |
| 5835 | * - #ASM_MEDIA_FMT_G711_ALAW_FS |
| 5836 | * - #ASM_MEDIA_FMT_G711_MLAW_FS |
| 5837 | * - #ASM_MEDIA_FMT_G729A_FS |
| 5838 | * - #ASM_MEDIA_FMT_FR_FS |
| 5839 | * - #ASM_MEDIA_FMT_VORBIS |
| 5840 | * - #ASM_MEDIA_FMT_FLAC |
| 5841 | * - #ASM_MEDIA_FMT_ALAC |
| 5842 | * - #ASM_MEDIA_FMT_APE |
| 5843 | * - #ASM_MEDIA_FMT_EXAMPLE |
| 5844 | */ |
| 5845 | } __packed; |
| 5846 | |
| 5847 | #define ASM_STREAM_CMD_OPEN_PULL_MODE_WRITE 0x00010DD9 |
| 5848 | |
| 5849 | /* Bitmask for the stream_perf_mode subfield. */ |
| 5850 | #define ASM_BIT_MASK_STREAM_PERF_FLAG_PULL_MODE_WRITE 0xE0000000UL |
| 5851 | |
| 5852 | /* Bitmask for the stream_perf_mode subfield. */ |
| 5853 | #define ASM_SHIFT_STREAM_PERF_FLAG_PULL_MODE_WRITE 29 |
| 5854 | |
| 5855 | #define ASM_STREAM_CMD_OPEN_PUSH_MODE_READ 0x00010DDA |
| 5856 | |
| 5857 | #define ASM_BIT_MASK_STREAM_PERF_FLAG_PUSH_MODE_READ 0xE0000000UL |
| 5858 | |
| 5859 | #define ASM_SHIFT_STREAM_PERF_FLAG_PUSH_MODE_READ 29 |
| 5860 | |
| 5861 | #define ASM_DATA_EVENT_WATERMARK 0x00010DDB |
| 5862 | |
| 5863 | struct asm_shared_position_buffer { |
| 5864 | volatile uint32_t frame_counter; |
| 5865 | /* Counter used to handle interprocessor synchronization issues. |
| 5866 | * When frame_counter is 0: read_index, wall_clock_us_lsw, and |
| 5867 | * wall_clock_us_msw are invalid. |
| 5868 | * Supported values: >= 0. |
| 5869 | */ |
| 5870 | |
| 5871 | volatile uint32_t index; |
| 5872 | /* Index in bytes from where the aDSP is reading/writing. |
| 5873 | * Supported values: 0 to circular buffer size - 1 |
| 5874 | */ |
| 5875 | |
| 5876 | volatile uint32_t wall_clock_us_lsw; |
| 5877 | /* Lower 32 bits of the 64-bit wall clock time in microseconds when the |
| 5878 | * read index was updated. |
| 5879 | * Supported values: >= 0 |
| 5880 | */ |
| 5881 | |
| 5882 | volatile uint32_t wall_clock_us_msw; |
| 5883 | /* Upper 32 bits of the 64 bit wall clock time in microseconds when the |
| 5884 | * read index was updated |
| 5885 | * Supported values: >= 0 |
| 5886 | */ |
| 5887 | } __packed; |
| 5888 | |
| 5889 | struct asm_shared_watermark_level { |
| 5890 | uint32_t watermark_level_bytes; |
| 5891 | } __packed; |
| 5892 | |
| 5893 | struct asm_stream_cmd_open_shared_io { |
| 5894 | struct apr_hdr hdr; |
| 5895 | uint32_t mode_flags; |
| 5896 | uint16_t endpoint_type; |
| 5897 | uint16_t topo_bits_per_sample; |
| 5898 | uint32_t topo_id; |
| 5899 | uint32_t fmt_id; |
| 5900 | uint32_t shared_pos_buf_phy_addr_lsw; |
| 5901 | uint32_t shared_pos_buf_phy_addr_msw; |
| 5902 | uint16_t shared_pos_buf_mem_pool_id; |
| 5903 | uint16_t shared_pos_buf_num_regions; |
| 5904 | uint32_t shared_pos_buf_property_flag; |
| 5905 | uint32_t shared_circ_buf_start_phy_addr_lsw; |
| 5906 | uint32_t shared_circ_buf_start_phy_addr_msw; |
| 5907 | uint32_t shared_circ_buf_size; |
| 5908 | uint16_t shared_circ_buf_mem_pool_id; |
| 5909 | uint16_t shared_circ_buf_num_regions; |
| 5910 | uint32_t shared_circ_buf_property_flag; |
| 5911 | uint32_t num_watermark_levels; |
| 5912 | struct asm_multi_channel_pcm_fmt_blk_v3 fmt; |
| 5913 | struct avs_shared_map_region_payload map_region_pos_buf; |
| 5914 | struct avs_shared_map_region_payload map_region_circ_buf; |
| 5915 | struct asm_shared_watermark_level watermark[0]; |
| 5916 | } __packed; |
| 5917 | |
| 5918 | #define ASM_STREAM_CMD_OPEN_READ_V3 0x00010DB4 |
| 5919 | |
| 5920 | /* Definition of the timestamp type flag bitmask */ |
| 5921 | #define ASM_BIT_MASKIMESTAMPYPE_FLAG (0x00000020UL) |
| 5922 | |
| 5923 | /* Definition of the timestamp type flag shift value. */ |
| 5924 | #define ASM_SHIFTIMESTAMPYPE_FLAG 5 |
| 5925 | |
| 5926 | /* Relative timestamp is identified by this value.*/ |
| 5927 | #define ASM_RELATIVEIMESTAMP 0 |
| 5928 | |
| 5929 | /* Absolute timestamp is identified by this value.*/ |
| 5930 | #define ASM_ABSOLUTEIMESTAMP 1 |
| 5931 | |
| 5932 | /* Bit value for Low Latency Tx stream subfield */ |
| 5933 | #define ASM_LOW_LATENCY_TX_STREAM_SESSION 1 |
| 5934 | |
| 5935 | /* Bit shift for the stream_perf_mode subfield. */ |
| 5936 | #define ASM_SHIFT_STREAM_PERF_MODE_FLAG_IN_OPEN_READ 29 |
| 5937 | |
| 5938 | struct asm_stream_cmd_open_read_v3 { |
| 5939 | struct apr_hdr hdr; |
| 5940 | u32 mode_flags; |
| 5941 | /* Mode flags that indicate whether meta information per encoded |
| 5942 | * frame is to be provided. |
| 5943 | * Supported values for bit 4: |
| 5944 | * |
| 5945 | * - 0 -- Return data buffer contains all encoded frames only; it |
| 5946 | * does not contain frame metadata. |
| 5947 | * |
| 5948 | * - 1 -- Return data buffer contains an array of metadata and |
| 5949 | * encoded frames. |
| 5950 | * |
| 5951 | * - Use #ASM_BIT_MASK_META_INFO_FLAG as the bitmask and |
| 5952 | * #ASM_SHIFT_META_INFO_FLAG as the shift value for this bit. |
| 5953 | * |
| 5954 | * |
| 5955 | * Supported values for bit 5: |
| 5956 | * |
| 5957 | * - ASM_RELATIVEIMESTAMP -- ASM_DATA_EVENT_READ_DONE_V2 will have |
| 5958 | * - relative time-stamp. |
| 5959 | * - ASM_ABSOLUTEIMESTAMP -- ASM_DATA_EVENT_READ_DONE_V2 will |
| 5960 | * - have absolute time-stamp. |
| 5961 | * |
| 5962 | * - Use #ASM_BIT_MASKIMESTAMPYPE_FLAG as the bitmask and |
| 5963 | * #ASM_SHIFTIMESTAMPYPE_FLAG as the shift value for this bit. |
| 5964 | * |
| 5965 | * All other bits are reserved; clients must set them to zero. |
| 5966 | */ |
| 5967 | |
| 5968 | u32 src_endpointype; |
| 5969 | /* Specifies the endpoint providing the input samples. |
| 5970 | * Supported values: |
| 5971 | * - 0 -- Device matrix |
| 5972 | * - All other values are reserved; clients must set them to zero. |
| 5973 | * Otherwise, an error is returned. |
| 5974 | * The device matrix is the gateway from the tunneled Tx ports. |
| 5975 | */ |
| 5976 | |
| 5977 | u32 preprocopo_id; |
| 5978 | /* Specifies the topology (order of processing) of preprocessing |
| 5979 | * algorithms. <i>None</i> means no preprocessing. |
| 5980 | * Supported values: |
| 5981 | * - #ASM_STREAM_PREPROCOPO_ID_DEFAULT |
| 5982 | * - #ASM_STREAM_PREPROCOPO_ID_NONE |
| 5983 | * |
| 5984 | * This field can also be enabled through SetParams flags. |
| 5985 | */ |
| 5986 | |
| 5987 | u32 enc_cfg_id; |
| 5988 | /* Media configuration ID for encoded output. |
| 5989 | * Supported values: |
| 5990 | * - #ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V2 |
| 5991 | * - #ASM_MEDIA_FMT_AAC_V2 |
| 5992 | * - #ASM_MEDIA_FMT_AMRNB_FS |
| 5993 | * - #ASM_MEDIA_FMT_AMRWB_FS |
| 5994 | * - #ASM_MEDIA_FMT_V13K_FS |
| 5995 | * - #ASM_MEDIA_FMT_EVRC_FS |
| 5996 | * - #ASM_MEDIA_FMT_EVRCB_FS |
| 5997 | * - #ASM_MEDIA_FMT_EVRCWB_FS |
| 5998 | * - #ASM_MEDIA_FMT_SBC |
| 5999 | * - #ASM_MEDIA_FMT_G711_ALAW_FS |
| 6000 | * - #ASM_MEDIA_FMT_G711_MLAW_FS |
| 6001 | * - #ASM_MEDIA_FMT_G729A_FS |
| 6002 | * - #ASM_MEDIA_FMT_EXAMPLE |
| 6003 | * - #ASM_MEDIA_FMT_WMA_V8 |
| 6004 | */ |
| 6005 | |
| 6006 | u16 bits_per_sample; |
| 6007 | /* Number of bits per sample processed by ASM modules. |
| 6008 | * Supported values: 16 and 24 bits per sample |
| 6009 | */ |
| 6010 | |
| 6011 | u16 reserved; |
| 6012 | /* Reserved for future use. This field must be set to zero.*/ |
| 6013 | } __packed; |
| 6014 | |
| 6015 | #define ASM_POPP_OUTPUT_SR_NATIVE_RATE 0 |
| 6016 | |
| 6017 | /* Enumeration for the maximum sampling rate at the POPP output.*/ |
| 6018 | #define ASM_POPP_OUTPUT_SR_MAX_RATE 48000 |
| 6019 | |
| 6020 | #define ASM_STREAM_CMD_OPEN_READWRITE_V2 0x00010D8D |
| 6021 | #define ASM_STREAM_CMD_OPEN_READWRITE_V2 0x00010D8D |
| 6022 | |
| 6023 | struct asm_stream_cmd_open_readwrite_v2 { |
| 6024 | struct apr_hdr hdr; |
| 6025 | u32 mode_flags; |
| 6026 | /* Mode flags. |
| 6027 | * Supported values for bit 2: |
| 6028 | * - 0 -- SR/CM change notification event is disabled. |
| 6029 | * - 1 -- SR/CM change notification event is enabled. Use |
| 6030 | * #ASM_BIT_MASK_SR_CM_CHANGE_NOTIFY_FLAG and |
| 6031 | * #ASM_SHIFT_SR_CM_CHANGE_NOTIFY_FLAG to set or |
| 6032 | * getting this flag. |
| 6033 | * |
| 6034 | * Supported values for bit 4: |
| 6035 | * - 0 -- Return read data buffer contains all encoded frames only; it |
| 6036 | * does not contain frame metadata. |
| 6037 | * - 1 -- Return read data buffer contains an array of metadata and |
| 6038 | * encoded frames. |
| 6039 | * |
| 6040 | * All other bits are reserved; clients must set them to zero. |
| 6041 | */ |
| 6042 | |
| 6043 | u32 postprocopo_id; |
| 6044 | /* Specifies the topology (order of processing) of postprocessing |
| 6045 | * algorithms. <i>None</i> means no postprocessing. |
| 6046 | * |
| 6047 | * Supported values: |
| 6048 | * - #ASM_STREAM_POSTPROCOPO_ID_DEFAULT |
| 6049 | * - #ASM_STREAM_POSTPROCOPO_ID_MCH_PEAK_VOL |
| 6050 | * - #ASM_STREAM_POSTPROCOPO_ID_NONE |
| 6051 | */ |
| 6052 | |
| 6053 | u32 dec_fmt_id; |
| 6054 | /* Specifies the media type of the input data. PCM indicates that |
| 6055 | * no decoding must be performed, e.g., this is an NT encoder |
| 6056 | * session. |
| 6057 | * Supported values: |
| 6058 | * - #ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V2 |
| 6059 | * - #ASM_MEDIA_FMT_ADPCM |
| 6060 | * - #ASM_MEDIA_FMT_MP3 |
| 6061 | * - #ASM_MEDIA_FMT_AAC_V2 |
| 6062 | * - #ASM_MEDIA_FMT_DOLBY_AAC |
| 6063 | * - #ASM_MEDIA_FMT_AMRNB_FS |
| 6064 | * - #ASM_MEDIA_FMT_AMRWB_FS |
| 6065 | * - #ASM_MEDIA_FMT_V13K_FS |
| 6066 | * - #ASM_MEDIA_FMT_EVRC_FS |
| 6067 | * - #ASM_MEDIA_FMT_EVRCB_FS |
| 6068 | * - #ASM_MEDIA_FMT_EVRCWB_FS |
| 6069 | * - #ASM_MEDIA_FMT_SBC |
| 6070 | * - #ASM_MEDIA_FMT_WMA_V10PRO_V2 |
| 6071 | * - #ASM_MEDIA_FMT_WMA_V9_V2 |
| 6072 | * - #ASM_MEDIA_FMT_AMR_WB_PLUS_V2 |
| 6073 | * - #ASM_MEDIA_FMT_AC3 |
| 6074 | * - #ASM_MEDIA_FMT_G711_ALAW_FS |
| 6075 | * - #ASM_MEDIA_FMT_G711_MLAW_FS |
| 6076 | * - #ASM_MEDIA_FMT_G729A_FS |
| 6077 | * - #ASM_MEDIA_FMT_EXAMPLE |
| 6078 | */ |
| 6079 | |
| 6080 | u32 enc_cfg_id; |
| 6081 | /* Specifies the media type for the output of the stream. PCM |
| 6082 | * indicates that no encoding must be performed, e.g., this is an NT |
| 6083 | * decoder session. |
| 6084 | * Supported values: |
| 6085 | * - #ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V2 |
| 6086 | * - #ASM_MEDIA_FMT_AAC_V2 |
| 6087 | * - #ASM_MEDIA_FMT_AMRNB_FS |
| 6088 | * - #ASM_MEDIA_FMT_AMRWB_FS |
| 6089 | * - #ASM_MEDIA_FMT_V13K_FS |
| 6090 | * - #ASM_MEDIA_FMT_EVRC_FS |
| 6091 | * - #ASM_MEDIA_FMT_EVRCB_FS |
| 6092 | * - #ASM_MEDIA_FMT_EVRCWB_FS |
| 6093 | * - #ASM_MEDIA_FMT_SBC |
| 6094 | * - #ASM_MEDIA_FMT_G711_ALAW_FS |
| 6095 | * - #ASM_MEDIA_FMT_G711_MLAW_FS |
| 6096 | * - #ASM_MEDIA_FMT_G729A_FS |
| 6097 | * - #ASM_MEDIA_FMT_EXAMPLE |
| 6098 | * - #ASM_MEDIA_FMT_WMA_V8 |
| 6099 | */ |
| 6100 | |
| 6101 | u16 bits_per_sample; |
| 6102 | /* Number of bits per sample processed by ASM modules. |
| 6103 | * Supported values: 16 and 24 bits per sample |
| 6104 | */ |
| 6105 | |
| 6106 | u16 reserved; |
| 6107 | /* Reserved for future use. This field must be set to zero.*/ |
| 6108 | |
| 6109 | } __packed; |
| 6110 | |
| 6111 | #define ASM_STREAM_CMD_OPEN_LOOPBACK_V2 0x00010D8E |
| 6112 | struct asm_stream_cmd_open_loopback_v2 { |
| 6113 | struct apr_hdr hdr; |
| 6114 | u32 mode_flags; |
| 6115 | /* Mode flags. |
| 6116 | * Bit 0-31: reserved; client should set these bits to 0 |
| 6117 | */ |
| 6118 | u16 src_endpointype; |
| 6119 | /* Endpoint type. 0 = Tx Matrix */ |
| 6120 | u16 sink_endpointype; |
| 6121 | /* Endpoint type. 0 = Rx Matrix */ |
| 6122 | u32 postprocopo_id; |
| 6123 | /* Postprocessor topology ID. Specifies the topology of |
| 6124 | * postprocessing algorithms. |
| 6125 | */ |
| 6126 | |
| 6127 | u16 bits_per_sample; |
| 6128 | /* The number of bits per sample processed by ASM modules |
| 6129 | * Supported values: 16 and 24 bits per sample |
| 6130 | */ |
| 6131 | u16 reserved; |
| 6132 | /* Reserved for future use. This field must be set to zero. */ |
| 6133 | } __packed; |
| 6134 | |
| 6135 | |
| 6136 | #define ASM_STREAM_CMD_OPEN_TRANSCODE_LOOPBACK 0x00010DBA |
| 6137 | |
| 6138 | /* Bitmask for the stream's Performance mode. */ |
| 6139 | #define ASM_BIT_MASK_STREAM_PERF_MODE_FLAG_IN_OPEN_TRANSCODE_LOOPBACK \ |
| 6140 | (0x70000000UL) |
| 6141 | |
| 6142 | /* Bit shift for the stream's Performance mode. */ |
| 6143 | #define ASM_SHIFT_STREAM_PERF_MODE_FLAG_IN_OPEN_TRANSCODE_LOOPBACK 28 |
| 6144 | |
| 6145 | /* Bitmask for the decoder converter enable flag. */ |
| 6146 | #define ASM_BIT_MASK_DECODER_CONVERTER_FLAG (0x00000078UL) |
| 6147 | |
| 6148 | /* Shift value for the decoder converter enable flag. */ |
| 6149 | #define ASM_SHIFT_DECODER_CONVERTER_FLAG 3 |
| 6150 | |
| 6151 | /* Converter mode is None (Default). */ |
| 6152 | #define ASM_CONVERTER_MODE_NONE 0 |
| 6153 | |
| 6154 | /* Converter mode is DDP-to-DD. */ |
| 6155 | #define ASM_DDP_DD_CONVERTER_MODE 1 |
| 6156 | |
| 6157 | /* Identifies a special converter mode where source and sink formats |
| 6158 | * are the same but postprocessing must applied. Therefore, Decode |
| 6159 | * @rarrow Re-encode is necessary. |
| 6160 | */ |
| 6161 | #define ASM_POST_PROCESS_CONVERTER_MODE 2 |
| 6162 | |
| 6163 | |
| 6164 | struct asm_stream_cmd_open_transcode_loopback_t { |
| 6165 | struct apr_hdr hdr; |
| 6166 | u32 mode_flags; |
| 6167 | /* Mode Flags specifies the performance mode in which this stream |
| 6168 | * is to be opened. |
| 6169 | * Supported values{for bits 30 to 28}(stream_perf_mode flag) |
| 6170 | * |
| 6171 | * #ASM_LEGACY_STREAM_SESSION -- This mode ensures backward |
| 6172 | * compatibility to the original behavior |
| 6173 | * of ASM_STREAM_CMD_OPEN_TRANSCODE_LOOPBACK |
| 6174 | * |
| 6175 | * #ASM_LOW_LATENCY_STREAM_SESSION -- Opens a loopback session by using |
| 6176 | * shortened buffers in low latency POPP |
| 6177 | * - Recommendation: Do not enable high latency algorithms. They might |
| 6178 | * negate the benefits of opening a low latency stream, and they |
| 6179 | * might also suffer quality degradation from unexpected jitter. |
| 6180 | * - This Low Latency mode is supported only for PCM In and PCM Out |
| 6181 | * loopbacks. An error is returned if Low Latency mode is opened for |
| 6182 | * other transcode loopback modes. |
| 6183 | * - To configure this subfield, use |
| 6184 | * ASM_BIT_MASK_STREAM_PERF_MODE_FLAG_IN_OPEN_TRANSCODE_LOOPBACK and |
| 6185 | * ASM_SHIFT_STREAM_PERF_MODE_FLAG_IN_OPEN_TRANSCODE_LOOPBACK. |
| 6186 | * |
| 6187 | * Supported values{for bits 6 to 3} (decoder-converter compatibility) |
| 6188 | * #ASM_CONVERTER_MODE_NONE (0x0) -- Default |
| 6189 | * #ASM_DDP_DD_CONVERTER_MODE (0x1) |
| 6190 | * #ASM_POST_PROCESS_CONVERTER_MODE (0x2) |
| 6191 | * 0x3-0xF -- Reserved for future use |
| 6192 | * - Use #ASM_BIT_MASK_DECODER_CONVERTER_FLAG and |
| 6193 | * ASM_SHIFT_DECODER_CONVERTER_FLAG to set this bit |
| 6194 | * All other bits are reserved; clients must set them to 0. |
| 6195 | */ |
| 6196 | |
| 6197 | u32 src_format_id; |
| 6198 | /* Specifies the media format of the input audio stream. |
| 6199 | * |
| 6200 | * Supported values |
| 6201 | * - #ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V2 |
| 6202 | * - #ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V3 |
| 6203 | * - #ASM_MEDIA_FMT_DTS |
| 6204 | * - #ASM_MEDIA_FMT_EAC3_DEC |
| 6205 | * - #ASM_MEDIA_FMT_EAC3 |
| 6206 | * - #ASM_MEDIA_FMT_AC3_DEC |
| 6207 | * - #ASM_MEDIA_FMT_AC3 |
| 6208 | */ |
| 6209 | u32 sink_format_id; |
| 6210 | /* Specifies the media format of the output stream. |
| 6211 | * |
| 6212 | * Supported values |
| 6213 | * - #ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V2 |
| 6214 | * - #ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V3 |
| 6215 | * - #ASM_MEDIA_FMT_DTS (not supported in Low Latency mode) |
| 6216 | * - #ASM_MEDIA_FMT_EAC3_DEC (not supported in Low Latency mode) |
| 6217 | * - #ASM_MEDIA_FMT_EAC3 (not supported in Low Latency mode) |
| 6218 | * - #ASM_MEDIA_FMT_AC3_DEC (not supported in Low Latency mode) |
| 6219 | * - #ASM_MEDIA_FMT_AC3 (not supported in Low Latency mode) |
| 6220 | */ |
| 6221 | |
| 6222 | u32 audproc_topo_id; |
| 6223 | /* Postprocessing topology ID, which specifies the topology (order of |
| 6224 | * processing) of postprocessing algorithms. |
| 6225 | * |
| 6226 | * Supported values |
| 6227 | * - #ASM_STREAM_POSTPROC_TOPO_ID_DEFAULT |
| 6228 | * - #ASM_STREAM_POSTPROC_TOPO_ID_PEAKMETER |
| 6229 | * - #ASM_STREAM_POSTPROC_TOPO_ID_MCH_PEAK_VOL |
| 6230 | * - #ASM_STREAM_POSTPROC_TOPO_ID_NONE |
| 6231 | * Topologies can be added through #ASM_CMD_ADD_TOPOLOGIES. |
| 6232 | * This field is ignored for the Converter mode, in which no |
| 6233 | * postprocessing is performed. |
| 6234 | */ |
| 6235 | |
| 6236 | u16 src_endpoint_type; |
| 6237 | /* Specifies the source endpoint that provides the input samples. |
| 6238 | * |
| 6239 | * Supported values |
| 6240 | * - 0 -- Tx device matrix or stream router (gateway to the hardware |
| 6241 | * ports) |
| 6242 | * - All other values are reserved |
| 6243 | * Clients must set this field to 0. Otherwise, an error is returned. |
| 6244 | */ |
| 6245 | |
| 6246 | u16 sink_endpoint_type; |
| 6247 | /* Specifies the sink endpoint type. |
| 6248 | * |
| 6249 | * Supported values |
| 6250 | * - 0 -- Rx device matrix or stream router (gateway to the hardware |
| 6251 | * ports) |
| 6252 | * - All other values are reserved |
| 6253 | * Clients must set this field to 0. Otherwise, an error is returned. |
| 6254 | */ |
| 6255 | |
| 6256 | u16 bits_per_sample; |
| 6257 | /* Number of bits per sample processed by the ASM modules. |
| 6258 | * Supported values 16, 24 |
| 6259 | */ |
| 6260 | |
| 6261 | u16 reserved; |
| 6262 | /* This field must be set to 0. |
| 6263 | */ |
| 6264 | } __packed; |
| 6265 | |
| 6266 | |
| 6267 | #define ASM_STREAM_CMD_CLOSE 0x00010BCD |
| 6268 | #define ASM_STREAM_CMD_FLUSH 0x00010BCE |
| 6269 | |
| 6270 | |
| 6271 | #define ASM_STREAM_CMD_FLUSH_READBUFS 0x00010C09 |
| 6272 | #define ASM_STREAM_CMD_SET_PP_PARAMS_V2 0x00010DA1 |
| 6273 | |
| 6274 | struct asm_stream_cmd_set_pp_params_v2 { |
| 6275 | u32 data_payload_addr_lsw; |
| 6276 | /* LSW of parameter data payload address. Supported values: any. */ |
| 6277 | u32 data_payload_addr_msw; |
| 6278 | /* MSW of Parameter data payload address. Supported values: any. |
| 6279 | * - Must be set to zero for in-band data. |
| 6280 | * - In the case of 32 bit Shared memory address, msw field must be |
| 6281 | * - set to zero. |
| 6282 | * - In the case of 36 bit shared memory address, bit 31 to bit 4 of |
| 6283 | * msw |
| 6284 | * |
| 6285 | * - must be set to zero. |
| 6286 | */ |
| 6287 | u32 mem_map_handle; |
| 6288 | /* Supported Values: Any. |
| 6289 | * memory map handle returned by DSP through |
| 6290 | * ASM_CMD_SHARED_MEM_MAP_REGIONS |
| 6291 | * command. |
| 6292 | * if mmhandle is NULL, the ParamData payloads are within the |
| 6293 | * message payload (in-band). |
| 6294 | * If mmhandle is non-NULL, the ParamData payloads begin at the |
| 6295 | * address specified in the address msw and lsw (out-of-band). |
| 6296 | */ |
| 6297 | |
| 6298 | u32 data_payload_size; |
| 6299 | /* Size in bytes of the variable payload accompanying the |
| 6300 | * message, or in shared memory. This field is used for parsing the |
| 6301 | * parameter payload. |
| 6302 | */ |
| 6303 | } __packed; |
| 6304 | |
| 6305 | |
| 6306 | struct asm_stream_param_data_v2 { |
| 6307 | u32 module_id; |
| 6308 | /* Unique module ID. */ |
| 6309 | |
| 6310 | u32 param_id; |
| 6311 | /* Unique parameter ID. */ |
| 6312 | |
| 6313 | u16 param_size; |
| 6314 | /* Data size of the param_id/module_id combination. This is |
| 6315 | * a multiple of 4 bytes. |
| 6316 | */ |
| 6317 | |
| 6318 | u16 reserved; |
| 6319 | /* Reserved for future enhancements. This field must be set to |
| 6320 | * zero. |
| 6321 | */ |
| 6322 | |
| 6323 | } __packed; |
| 6324 | |
| 6325 | #define ASM_STREAM_CMD_GET_PP_PARAMS_V2 0x00010DA2 |
| 6326 | |
| 6327 | struct asm_stream_cmd_get_pp_params_v2 { |
| 6328 | u32 data_payload_addr_lsw; |
| 6329 | /* LSW of the parameter data payload address. */ |
| 6330 | u32 data_payload_addr_msw; |
| 6331 | /* MSW of the parameter data payload address. |
| 6332 | * - Size of the shared memory, if specified, shall be large enough |
| 6333 | * to contain the whole ParamData payload, including Module ID, |
| 6334 | * Param ID, Param Size, and Param Values |
| 6335 | * - Must be set to zero for in-band data |
| 6336 | * - In the case of 32 bit Shared memory address, msw field must be |
| 6337 | * set to zero. |
| 6338 | * - In the case of 36 bit shared memory address, bit 31 to bit 4 of |
| 6339 | * msw must be set to zero. |
| 6340 | */ |
| 6341 | |
| 6342 | u32 mem_map_handle; |
| 6343 | /* Supported Values: Any. |
| 6344 | * memory map handle returned by DSP through ASM_CMD_SHARED_MEM_MAP_REGIONS |
| 6345 | * command. |
| 6346 | * if mmhandle is NULL, the ParamData payloads in the ACK are within the |
| 6347 | * message payload (in-band). |
| 6348 | * If mmhandle is non-NULL, the ParamData payloads in the ACK begin at the |
| 6349 | * address specified in the address msw and lsw. |
| 6350 | * (out-of-band). |
| 6351 | */ |
| 6352 | |
| 6353 | u32 module_id; |
| 6354 | /* Unique module ID. */ |
| 6355 | |
| 6356 | u32 param_id; |
| 6357 | /* Unique parameter ID. */ |
| 6358 | |
| 6359 | u16 param_max_size; |
| 6360 | /* Maximum data size of the module_id/param_id combination. This |
| 6361 | * is a multiple of 4 bytes. |
| 6362 | */ |
| 6363 | |
| 6364 | |
| 6365 | u16 reserved; |
| 6366 | /* Reserved for backward compatibility. Clients must set this |
| 6367 | * field to zero. |
| 6368 | */ |
| 6369 | } __packed; |
| 6370 | |
| 6371 | #define ASM_STREAM_CMD_SET_ENCDEC_PARAM 0x00010C10 |
| 6372 | |
| 6373 | #define ASM_STREAM_CMD_SET_ENCDEC_PARAM_V2 0x00013218 |
| 6374 | |
| 6375 | struct asm_stream_cmd_set_encdec_param_v2 { |
| 6376 | u16 service_id; |
| 6377 | /* 0 - ASM_ENCODER_SVC; 1 - ASM_DECODER_SVC */ |
| 6378 | |
| 6379 | u16 reserved; |
| 6380 | |
| 6381 | u32 param_id; |
| 6382 | /* ID of the parameter. */ |
| 6383 | |
| 6384 | u32 param_size; |
| 6385 | /* |
| 6386 | * Data size of this parameter, in bytes. The size is a multiple |
| 6387 | * of 4 bytes. |
| 6388 | */ |
| 6389 | } __packed; |
| 6390 | |
| 6391 | #define ASM_STREAM_CMD_REGISTER_ENCDEC_EVENTS 0x00013219 |
| 6392 | |
| 6393 | #define ASM_STREAM_CMD_ENCDEC_EVENTS 0x0001321A |
| 6394 | |
| 6395 | #define AVS_PARAM_ID_RTIC_SHARED_MEMORY_ADDR 0x00013237 |
| 6396 | |
| 6397 | struct avs_rtic_shared_mem_addr { |
| 6398 | struct apr_hdr hdr; |
| 6399 | struct asm_stream_cmd_set_encdec_param_v2 encdec; |
| 6400 | u32 shm_buf_addr_lsw; |
| 6401 | /* Lower 32 bit of the RTIC shared memory */ |
| 6402 | |
| 6403 | u32 shm_buf_addr_msw; |
| 6404 | /* Upper 32 bit of the RTIC shared memory */ |
| 6405 | |
| 6406 | u32 buf_size; |
| 6407 | /* Size of buffer */ |
| 6408 | |
| 6409 | u16 shm_buf_mem_pool_id; |
| 6410 | /* ADSP_MEMORY_MAP_SHMEM8_4K_POOL */ |
| 6411 | |
| 6412 | u16 shm_buf_num_regions; |
| 6413 | /* number of regions to map */ |
| 6414 | |
| 6415 | u32 shm_buf_flag; |
| 6416 | /* buffer property flag */ |
| 6417 | |
| 6418 | struct avs_shared_map_region_payload map_region; |
| 6419 | /* memory map region*/ |
| 6420 | } __packed; |
| 6421 | |
| 6422 | #define AVS_PARAM_ID_RTIC_EVENT_ACK 0x00013238 |
| 6423 | |
| 6424 | struct avs_param_rtic_event_ack { |
| 6425 | struct apr_hdr hdr; |
| 6426 | struct asm_stream_cmd_set_encdec_param_v2 encdec; |
| 6427 | } __packed; |
| 6428 | |
| 6429 | #define ASM_PARAM_ID_ENCDEC_BITRATE 0x00010C13 |
| 6430 | |
| 6431 | struct asm_bitrate_param { |
| 6432 | u32 bitrate; |
| 6433 | /* Maximum supported bitrate. Only the AAC encoder is supported.*/ |
| 6434 | |
| 6435 | } __packed; |
| 6436 | |
| 6437 | #define ASM_PARAM_ID_ENCDEC_ENC_CFG_BLK_V2 0x00010DA3 |
| 6438 | #define ASM_PARAM_ID_AAC_SBR_PS_FLAG 0x00010C63 |
| 6439 | |
| 6440 | /* Flag to turn off both SBR and PS processing, if they are |
| 6441 | * present in the bitstream. |
| 6442 | */ |
| 6443 | |
| 6444 | #define ASM_AAC_SBR_OFF_PS_OFF (2) |
| 6445 | |
| 6446 | /* Flag to turn on SBR but turn off PS processing,if they are |
| 6447 | * present in the bitstream. |
| 6448 | */ |
| 6449 | |
| 6450 | #define ASM_AAC_SBR_ON_PS_OFF (1) |
| 6451 | |
| 6452 | /* Flag to turn on both SBR and PS processing, if they are |
| 6453 | * present in the bitstream (default behavior). |
| 6454 | */ |
| 6455 | |
| 6456 | |
| 6457 | #define ASM_AAC_SBR_ON_PS_ON (0) |
| 6458 | |
| 6459 | /* Structure for an AAC SBR PS processing flag. */ |
| 6460 | |
| 6461 | /* Payload of the #ASM_PARAM_ID_AAC_SBR_PS_FLAG parameter in the |
| 6462 | * #ASM_STREAM_CMD_SET_ENCDEC_PARAM command. |
| 6463 | */ |
| 6464 | struct asm_aac_sbr_ps_flag_param { |
| 6465 | struct apr_hdr hdr; |
| 6466 | struct asm_stream_cmd_set_encdec_param encdec; |
| 6467 | struct asm_enc_cfg_blk_param_v2 encblk; |
| 6468 | |
| 6469 | u32 sbr_ps_flag; |
| 6470 | /* Control parameter to enable or disable SBR/PS processing in |
| 6471 | * the AAC bitstream. Use the following macros to set this field: |
| 6472 | * - #ASM_AAC_SBR_OFF_PS_OFF -- Turn off both SBR and PS |
| 6473 | * processing, if they are present in the bitstream. |
| 6474 | * - #ASM_AAC_SBR_ON_PS_OFF -- Turn on SBR processing, but not PS |
| 6475 | * processing, if they are present in the bitstream. |
| 6476 | * - #ASM_AAC_SBR_ON_PS_ON -- Turn on both SBR and PS processing, |
| 6477 | * if they are present in the bitstream (default behavior). |
| 6478 | * - All other values are invalid. |
| 6479 | * Changes are applied to the next decoded frame. |
| 6480 | */ |
| 6481 | } __packed; |
| 6482 | |
| 6483 | #define ASM_PARAM_ID_AAC_DUAL_MONO_MAPPING 0x00010C64 |
| 6484 | |
| 6485 | /* First single channel element in a dual mono bitstream.*/ |
| 6486 | #define ASM_AAC_DUAL_MONO_MAP_SCE_1 (1) |
| 6487 | |
| 6488 | /* Second single channel element in a dual mono bitstream.*/ |
| 6489 | #define ASM_AAC_DUAL_MONO_MAP_SCE_2 (2) |
| 6490 | |
| 6491 | /* Structure for AAC decoder dual mono channel mapping. */ |
| 6492 | |
| 6493 | |
| 6494 | struct asm_aac_dual_mono_mapping_param { |
| 6495 | struct apr_hdr hdr; |
| 6496 | struct asm_stream_cmd_set_encdec_param encdec; |
| 6497 | u16 left_channel_sce; |
| 6498 | u16 right_channel_sce; |
| 6499 | |
| 6500 | } __packed; |
| 6501 | |
| 6502 | #define ASM_STREAM_CMDRSP_GET_PP_PARAMS_V2 0x00010DA4 |
| 6503 | |
| 6504 | struct asm_stream_cmdrsp_get_pp_params_v2 { |
| 6505 | u32 status; |
| 6506 | } __packed; |
| 6507 | |
| 6508 | #define ASM_PARAM_ID_AC3_KARAOKE_MODE 0x00010D73 |
| 6509 | |
| 6510 | /* Enumeration for both vocals in a karaoke stream.*/ |
| 6511 | #define AC3_KARAOKE_MODE_NO_VOCAL (0) |
| 6512 | |
| 6513 | /* Enumeration for only the left vocal in a karaoke stream.*/ |
| 6514 | #define AC3_KARAOKE_MODE_LEFT_VOCAL (1) |
| 6515 | |
| 6516 | /* Enumeration for only the right vocal in a karaoke stream.*/ |
| 6517 | #define AC3_KARAOKE_MODE_RIGHT_VOCAL (2) |
| 6518 | |
| 6519 | /* Enumeration for both vocal channels in a karaoke stream.*/ |
| 6520 | #define AC3_KARAOKE_MODE_BOTH_VOCAL (3) |
| 6521 | #define ASM_PARAM_ID_AC3_DRC_MODE 0x00010D74 |
| 6522 | /* Enumeration for the Custom Analog mode.*/ |
| 6523 | #define AC3_DRC_MODE_CUSTOM_ANALOG (0) |
| 6524 | |
| 6525 | /* Enumeration for the Custom Digital mode.*/ |
| 6526 | #define AC3_DRC_MODE_CUSTOM_DIGITAL (1) |
| 6527 | /* Enumeration for the Line Out mode (light compression).*/ |
| 6528 | #define AC3_DRC_MODE_LINE_OUT (2) |
| 6529 | |
| 6530 | /* Enumeration for the RF remodulation mode (heavy compression).*/ |
| 6531 | #define AC3_DRC_MODE_RF_REMOD (3) |
| 6532 | #define ASM_PARAM_ID_AC3_DUAL_MONO_MODE 0x00010D75 |
| 6533 | |
| 6534 | /* Enumeration for playing dual mono in stereo mode.*/ |
| 6535 | #define AC3_DUAL_MONO_MODE_STEREO (0) |
| 6536 | |
| 6537 | /* Enumeration for playing left mono.*/ |
| 6538 | #define AC3_DUAL_MONO_MODE_LEFT_MONO (1) |
| 6539 | |
| 6540 | /* Enumeration for playing right mono.*/ |
| 6541 | #define AC3_DUAL_MONO_MODE_RIGHT_MONO (2) |
| 6542 | |
| 6543 | /* Enumeration for mixing both dual mono channels and playing them.*/ |
| 6544 | #define AC3_DUAL_MONO_MODE_MIXED_MONO (3) |
| 6545 | #define ASM_PARAM_ID_AC3_STEREO_DOWNMIX_MODE 0x00010D76 |
| 6546 | |
| 6547 | /* Enumeration for using the Downmix mode indicated in the bitstream. */ |
| 6548 | |
| 6549 | #define AC3_STEREO_DOWNMIX_MODE_AUTO_DETECT (0) |
| 6550 | |
| 6551 | /* Enumeration for Surround Compatible mode (preserves the |
| 6552 | * surround information). |
| 6553 | */ |
| 6554 | |
| 6555 | #define AC3_STEREO_DOWNMIX_MODE_LT_RT (1) |
| 6556 | /* Enumeration for Mono Compatible mode (if the output is to be |
| 6557 | * further downmixed to mono). |
| 6558 | */ |
| 6559 | |
| 6560 | #define AC3_STEREO_DOWNMIX_MODE_LO_RO (2) |
| 6561 | |
| 6562 | /* ID of the AC3 PCM scale factor parameter in the |
| 6563 | * #ASM_STREAM_CMD_SET_ENCDEC_PARAM command. |
| 6564 | */ |
| 6565 | #define ASM_PARAM_ID_AC3_PCM_SCALEFACTOR 0x00010D78 |
| 6566 | |
| 6567 | /* ID of the AC3 DRC boost scale factor parameter in the |
| 6568 | * #ASM_STREAM_CMD_SET_ENCDEC_PARAM command. |
| 6569 | */ |
| 6570 | #define ASM_PARAM_ID_AC3_DRC_BOOST_SCALEFACTOR 0x00010D79 |
| 6571 | |
| 6572 | /* ID of the AC3 DRC cut scale factor parameter in the |
| 6573 | * #ASM_STREAM_CMD_SET_ENCDEC_PARAM command. |
| 6574 | */ |
| 6575 | #define ASM_PARAM_ID_AC3_DRC_CUT_SCALEFACTOR 0x00010D7A |
| 6576 | |
| 6577 | /* Structure for AC3 Generic Parameter. */ |
| 6578 | |
| 6579 | /* Payload of the AC3 parameters in the |
| 6580 | * #ASM_STREAM_CMD_SET_ENCDEC_PARAM command. |
| 6581 | */ |
| 6582 | struct asm_ac3_generic_param { |
| 6583 | struct apr_hdr hdr; |
| 6584 | struct asm_stream_cmd_set_encdec_param encdec; |
| 6585 | struct asm_enc_cfg_blk_param_v2 encblk; |
| 6586 | u32 generic_parameter; |
| 6587 | /* AC3 generic parameter. Select from one of the following |
| 6588 | * possible values. |
| 6589 | * |
| 6590 | * For #ASM_PARAM_ID_AC3_KARAOKE_MODE, supported values are: |
| 6591 | * - AC3_KARAOKE_MODE_NO_VOCAL |
| 6592 | * - AC3_KARAOKE_MODE_LEFT_VOCAL |
| 6593 | * - AC3_KARAOKE_MODE_RIGHT_VOCAL |
| 6594 | * - AC3_KARAOKE_MODE_BOTH_VOCAL |
| 6595 | * |
| 6596 | * For #ASM_PARAM_ID_AC3_DRC_MODE, supported values are: |
| 6597 | * - AC3_DRC_MODE_CUSTOM_ANALOG |
| 6598 | * - AC3_DRC_MODE_CUSTOM_DIGITAL |
| 6599 | * - AC3_DRC_MODE_LINE_OUT |
| 6600 | * - AC3_DRC_MODE_RF_REMOD |
| 6601 | * |
| 6602 | * For #ASM_PARAM_ID_AC3_DUAL_MONO_MODE, supported values are: |
| 6603 | * - AC3_DUAL_MONO_MODE_STEREO |
| 6604 | * - AC3_DUAL_MONO_MODE_LEFT_MONO |
| 6605 | * - AC3_DUAL_MONO_MODE_RIGHT_MONO |
| 6606 | * - AC3_DUAL_MONO_MODE_MIXED_MONO |
| 6607 | * |
| 6608 | * For #ASM_PARAM_ID_AC3_STEREO_DOWNMIX_MODE, supported values are: |
| 6609 | * - AC3_STEREO_DOWNMIX_MODE_AUTO_DETECT |
| 6610 | * - AC3_STEREO_DOWNMIX_MODE_LT_RT |
| 6611 | * - AC3_STEREO_DOWNMIX_MODE_LO_RO |
| 6612 | * |
| 6613 | * For #ASM_PARAM_ID_AC3_PCM_SCALEFACTOR, supported values are |
| 6614 | * 0 to 1 in Q31 format. |
| 6615 | * |
| 6616 | * For #ASM_PARAM_ID_AC3_DRC_BOOST_SCALEFACTOR, supported values are |
| 6617 | * 0 to 1 in Q31 format. |
| 6618 | * |
| 6619 | * For #ASM_PARAM_ID_AC3_DRC_CUT_SCALEFACTOR, supported values are |
| 6620 | * 0 to 1 in Q31 format. |
| 6621 | */ |
| 6622 | } __packed; |
| 6623 | |
| 6624 | /* Enumeration for Raw mode (no downmixing), which specifies |
| 6625 | * that all channels in the bitstream are to be played out as is |
| 6626 | * without any downmixing. (Default) |
| 6627 | */ |
| 6628 | |
| 6629 | #define WMAPRO_CHANNEL_MASK_RAW (-1) |
| 6630 | |
| 6631 | /* Enumeration for setting the channel mask to 0. The 7.1 mode |
| 6632 | * (Home Theater) is assigned. |
| 6633 | */ |
| 6634 | |
| 6635 | |
| 6636 | #define WMAPRO_CHANNEL_MASK_ZERO 0x0000 |
| 6637 | |
| 6638 | /* Speaker layout mask for one channel (Home Theater, mono). |
| 6639 | * - Speaker front center |
| 6640 | */ |
| 6641 | #define WMAPRO_CHANNEL_MASK_1_C 0x0004 |
| 6642 | |
| 6643 | /* Speaker layout mask for two channels (Home Theater, stereo). |
| 6644 | * - Speaker front left |
| 6645 | * - Speaker front right |
| 6646 | */ |
| 6647 | #define WMAPRO_CHANNEL_MASK_2_L_R 0x0003 |
| 6648 | |
| 6649 | /* Speaker layout mask for three channels (Home Theater). |
| 6650 | * - Speaker front left |
| 6651 | * - Speaker front right |
| 6652 | * - Speaker front center |
| 6653 | */ |
| 6654 | #define WMAPRO_CHANNEL_MASK_3_L_C_R 0x0007 |
| 6655 | |
| 6656 | /* Speaker layout mask for two channels (stereo). |
| 6657 | * - Speaker back left |
| 6658 | * - Speaker back right |
| 6659 | */ |
| 6660 | #define WMAPRO_CHANNEL_MASK_2_Bl_Br 0x0030 |
| 6661 | |
| 6662 | /* Speaker layout mask for four channels. |
| 6663 | * - Speaker front left |
| 6664 | * - Speaker front right |
| 6665 | * - Speaker back left |
| 6666 | * - Speaker back right |
| 6667 | */ |
| 6668 | #define WMAPRO_CHANNEL_MASK_4_L_R_Bl_Br 0x0033 |
| 6669 | |
| 6670 | /* Speaker layout mask for four channels (Home Theater). |
| 6671 | * - Speaker front left |
| 6672 | * - Speaker front right |
| 6673 | * - Speaker front center |
| 6674 | * - Speaker back center |
| 6675 | */ |
| 6676 | #define WMAPRO_CHANNEL_MASK_4_L_R_C_Bc_HT 0x0107 |
| 6677 | /* Speaker layout mask for five channels. |
| 6678 | * - Speaker front left |
| 6679 | * - Speaker front right |
| 6680 | * - Speaker front center |
| 6681 | * - Speaker back left |
| 6682 | * - Speaker back right |
| 6683 | */ |
| 6684 | #define WMAPRO_CHANNEL_MASK_5_L_C_R_Bl_Br 0x0037 |
| 6685 | |
| 6686 | /* Speaker layout mask for five channels (5 mode, Home Theater). |
| 6687 | * - Speaker front left |
| 6688 | * - Speaker front right |
| 6689 | * - Speaker front center |
| 6690 | * - Speaker side left |
| 6691 | * - Speaker side right |
| 6692 | */ |
| 6693 | #define WMAPRO_CHANNEL_MASK_5_L_C_R_Sl_Sr_HT 0x0607 |
| 6694 | /* Speaker layout mask for six channels (5.1 mode). |
| 6695 | * - Speaker front left |
| 6696 | * - Speaker front right |
| 6697 | * - Speaker front center |
| 6698 | * - Speaker low frequency |
| 6699 | * - Speaker back left |
| 6700 | * - Speaker back right |
| 6701 | */ |
| 6702 | #define WMAPRO_CHANNEL_MASK_5DOT1_L_C_R_Bl_Br_SLF 0x003F |
| 6703 | /* Speaker layout mask for six channels (5.1 mode, Home Theater). |
| 6704 | * - Speaker front left |
| 6705 | * - Speaker front right |
| 6706 | * - Speaker front center |
| 6707 | * - Speaker low frequency |
| 6708 | * - Speaker side left |
| 6709 | * - Speaker side right |
| 6710 | */ |
| 6711 | #define WMAPRO_CHANNEL_MASK_5DOT1_L_C_R_Sl_Sr_SLF_HT 0x060F |
| 6712 | /* Speaker layout mask for six channels (5.1 mode, no LFE). |
| 6713 | * - Speaker front left |
| 6714 | * - Speaker front right |
| 6715 | * - Speaker front center |
| 6716 | * - Speaker back left |
| 6717 | * - Speaker back right |
| 6718 | * - Speaker back center |
| 6719 | */ |
| 6720 | #define WMAPRO_CHANNEL_MASK_5DOT1_L_C_R_Bl_Br_Bc 0x0137 |
| 6721 | /* Speaker layout mask for six channels (5.1 mode, Home Theater, |
| 6722 | * no LFE). |
| 6723 | * - Speaker front left |
| 6724 | * - Speaker front right |
| 6725 | * - Speaker front center |
| 6726 | * - Speaker back center |
| 6727 | * - Speaker side left |
| 6728 | * - Speaker side right |
| 6729 | */ |
| 6730 | #define WMAPRO_CHANNEL_MASK_5DOT1_L_C_R_Sl_Sr_Bc_HT 0x0707 |
| 6731 | |
| 6732 | /* Speaker layout mask for seven channels (6.1 mode). |
| 6733 | * - Speaker front left |
| 6734 | * - Speaker front right |
| 6735 | * - Speaker front center |
| 6736 | * - Speaker low frequency |
| 6737 | * - Speaker back left |
| 6738 | * - Speaker back right |
| 6739 | * - Speaker back center |
| 6740 | */ |
| 6741 | #define WMAPRO_CHANNEL_MASK_6DOT1_L_C_R_Bl_Br_Bc_SLF 0x013F |
| 6742 | |
| 6743 | /* Speaker layout mask for seven channels (6.1 mode, Home |
| 6744 | * Theater). |
| 6745 | * - Speaker front left |
| 6746 | * - Speaker front right |
| 6747 | * - Speaker front center |
| 6748 | * - Speaker low frequency |
| 6749 | * - Speaker back center |
| 6750 | * - Speaker side left |
| 6751 | * - Speaker side right |
| 6752 | */ |
| 6753 | #define WMAPRO_CHANNEL_MASK_6DOT1_L_C_R_Sl_Sr_Bc_SLF_HT 0x070F |
| 6754 | |
| 6755 | /* Speaker layout mask for seven channels (6.1 mode, no LFE). |
| 6756 | * - Speaker front left |
| 6757 | * - Speaker front right |
| 6758 | * - Speaker front center |
| 6759 | * - Speaker back left |
| 6760 | * - Speaker back right |
| 6761 | * - Speaker front left of center |
| 6762 | * - Speaker front right of center |
| 6763 | */ |
| 6764 | #define WMAPRO_CHANNEL_MASK_6DOT1_L_C_R_Bl_Br_SFLOC_SFROC 0x00F7 |
| 6765 | |
| 6766 | /* Speaker layout mask for seven channels (6.1 mode, Home |
| 6767 | * Theater, no LFE). |
| 6768 | * - Speaker front left |
| 6769 | * - Speaker front right |
| 6770 | * - Speaker front center |
| 6771 | * - Speaker side left |
| 6772 | * - Speaker side right |
| 6773 | * - Speaker front left of center |
| 6774 | * - Speaker front right of center |
| 6775 | */ |
| 6776 | #define WMAPRO_CHANNEL_MASK_6DOT1_L_C_R_Sl_Sr_SFLOC_SFROC_HT 0x0637 |
| 6777 | |
| 6778 | /* Speaker layout mask for eight channels (7.1 mode). |
| 6779 | * - Speaker front left |
| 6780 | * - Speaker front right |
| 6781 | * - Speaker front center |
| 6782 | * - Speaker back left |
| 6783 | * - Speaker back right |
| 6784 | * - Speaker low frequency |
| 6785 | * - Speaker front left of center |
| 6786 | * - Speaker front right of center |
| 6787 | */ |
| 6788 | #define WMAPRO_CHANNEL_MASK_7DOT1_L_C_R_Bl_Br_SLF_SFLOC_SFROC \ |
| 6789 | 0x00FF |
| 6790 | |
| 6791 | /* Speaker layout mask for eight channels (7.1 mode, Home Theater). |
| 6792 | * - Speaker front left |
| 6793 | * - Speaker front right |
| 6794 | * - Speaker front center |
| 6795 | * - Speaker side left |
| 6796 | * - Speaker side right |
| 6797 | * - Speaker low frequency |
| 6798 | * - Speaker front left of center |
| 6799 | * - Speaker front right of center |
| 6800 | * |
| 6801 | */ |
| 6802 | #define WMAPRO_CHANNEL_MASK_7DOT1_L_C_R_Sl_Sr_SLF_SFLOC_SFROC_HT \ |
| 6803 | 0x063F |
| 6804 | |
| 6805 | #define ASM_PARAM_ID_DEC_OUTPUT_CHAN_MAP 0x00010D82 |
| 6806 | |
| 6807 | /* Maximum number of decoder output channels. */ |
| 6808 | #define MAX_CHAN_MAP_CHANNELS 16 |
| 6809 | |
| 6810 | /* Structure for decoder output channel mapping. */ |
| 6811 | |
| 6812 | /* Payload of the #ASM_PARAM_ID_DEC_OUTPUT_CHAN_MAP parameter in the |
| 6813 | * #ASM_STREAM_CMD_SET_ENCDEC_PARAM command. |
| 6814 | */ |
| 6815 | struct asm_dec_out_chan_map_param { |
| 6816 | struct apr_hdr hdr; |
| 6817 | struct asm_stream_cmd_set_encdec_param encdec; |
| 6818 | u32 num_channels; |
| 6819 | /* Number of decoder output channels. |
| 6820 | * Supported values: 0 to #MAX_CHAN_MAP_CHANNELS |
| 6821 | * |
| 6822 | * A value of 0 indicates native channel mapping, which is valid |
| 6823 | * only for NT mode. This means the output of the decoder is to be |
| 6824 | * preserved as is. |
| 6825 | */ |
| 6826 | u8 channel_mapping[MAX_CHAN_MAP_CHANNELS]; |
| 6827 | } __packed; |
| 6828 | |
| 6829 | #define ASM_STREAM_CMD_OPEN_WRITE_COMPRESSED 0x00010D84 |
| 6830 | |
| 6831 | /* Bitmask for the IEC 61937 enable flag.*/ |
| 6832 | #define ASM_BIT_MASK_IEC_61937_STREAM_FLAG (0x00000001UL) |
| 6833 | |
| 6834 | /* Shift value for the IEC 61937 enable flag.*/ |
| 6835 | #define ASM_SHIFT_IEC_61937_STREAM_FLAG 0 |
| 6836 | |
| 6837 | /* Bitmask for the IEC 60958 enable flag.*/ |
| 6838 | #define ASM_BIT_MASK_IEC_60958_STREAM_FLAG (0x00000002UL) |
| 6839 | |
| 6840 | /* Shift value for the IEC 60958 enable flag.*/ |
| 6841 | #define ASM_SHIFT_IEC_60958_STREAM_FLAG 1 |
| 6842 | |
| 6843 | /* Payload format for open write compressed command */ |
| 6844 | |
| 6845 | /* Payload format for the #ASM_STREAM_CMD_OPEN_WRITE_COMPRESSED |
| 6846 | * command, which opens a stream for a given session ID and stream ID |
| 6847 | * to be rendered in the compressed format. |
| 6848 | */ |
| 6849 | |
| 6850 | struct asm_stream_cmd_open_write_compressed { |
| 6851 | struct apr_hdr hdr; |
| 6852 | u32 flags; |
| 6853 | /* Mode flags that configure the stream for a specific format. |
| 6854 | * Supported values: |
| 6855 | * - Bit 0 -- IEC 61937 compatibility |
| 6856 | * - 0 -- Stream is not in IEC 61937 format |
| 6857 | * - 1 -- Stream is in IEC 61937 format |
| 6858 | * - Bit 1 -- IEC 60958 compatibility |
| 6859 | * - 0 -- Stream is not in IEC 60958 format |
| 6860 | * - 1 -- Stream is in IEC 60958 format |
| 6861 | * - Bits 2 to 31 -- 0 (Reserved) |
| 6862 | * |
| 6863 | * For the same stream, bit 0 cannot be set to 0 and bit 1 cannot |
| 6864 | * be set to 1. A compressed stream connot have IEC 60958 |
| 6865 | * packetization applied without IEC 61937 packetization. |
| 6866 | * @note1hang Currently, IEC 60958 packetized input streams are not |
| 6867 | * supported. |
| 6868 | */ |
| 6869 | |
| 6870 | |
| 6871 | u32 fmt_id; |
| 6872 | /* Specifies the media type of the HDMI stream to be opened. |
| 6873 | * Supported values: |
| 6874 | * - #ASM_MEDIA_FMT_AC3 |
| 6875 | * - #ASM_MEDIA_FMT_EAC3 |
| 6876 | * - #ASM_MEDIA_FMT_DTS |
| 6877 | * - #ASM_MEDIA_FMT_ATRAC |
| 6878 | * - #ASM_MEDIA_FMT_MAT |
| 6879 | * |
| 6880 | * @note1hang This field must be set to a valid media type even if |
| 6881 | * IEC 61937 packetization is not performed by the aDSP. |
| 6882 | */ |
| 6883 | |
| 6884 | } __packed; |
| 6885 | |
| 6886 | |
| 6887 | /* Indicates the number of samples per channel to be removed from the |
| 6888 | * beginning of the stream. |
| 6889 | */ |
| 6890 | #define ASM_DATA_CMD_REMOVE_INITIAL_SILENCE 0x00010D67 |
| 6891 | |
| 6892 | /* Indicates the number of samples per channel to be removed from |
| 6893 | * the end of the stream. |
| 6894 | */ |
| 6895 | #define ASM_DATA_CMD_REMOVE_TRAILING_SILENCE 0x00010D68 |
| 6896 | |
| 6897 | struct asm_data_cmd_remove_silence { |
| 6898 | struct apr_hdr hdr; |
| 6899 | u32 num_samples_to_remove; |
| 6900 | /* < Number of samples per channel to be removed. |
| 6901 | * @values 0 to (2@sscr{32}-1) |
| 6902 | */ |
| 6903 | } __packed; |
| 6904 | |
| 6905 | #define ASM_STREAM_CMD_OPEN_READ_COMPRESSED 0x00010D95 |
| 6906 | |
| 6907 | struct asm_stream_cmd_open_read_compressed { |
| 6908 | struct apr_hdr hdr; |
| 6909 | u32 mode_flags; |
| 6910 | /* Mode flags that indicate whether meta information per encoded |
| 6911 | * frame is to be provided. |
| 6912 | * Supported values for bit 4: |
| 6913 | * - 0 -- Return data buffer contains all encoded frames only; it does |
| 6914 | * not contain frame metadata. |
| 6915 | * - 1 -- Return data buffer contains an array of metadata and encoded |
| 6916 | * frames. |
| 6917 | * - Use #ASM_BIT_MASK_META_INFO_FLAG to set the bitmask and |
| 6918 | * #ASM_SHIFT_META_INFO_FLAG to set the shift value for this bit. |
| 6919 | * All other bits are reserved; clients must set them to zero. |
| 6920 | */ |
| 6921 | |
| 6922 | u32 frames_per_buf; |
| 6923 | /* Indicates the number of frames that need to be returned per |
| 6924 | * read buffer |
| 6925 | * Supported values: should be greater than 0 |
| 6926 | */ |
| 6927 | |
| 6928 | } __packed; |
| 6929 | |
| 6930 | /* adsp_asm_stream_commands.h*/ |
| 6931 | |
| 6932 | |
| 6933 | /* adsp_asm_api.h (no changes)*/ |
| 6934 | #define ASM_STREAM_POSTPROCOPO_ID_DEFAULT \ |
| 6935 | 0x00010BE4 |
| 6936 | #define ASM_STREAM_POSTPROCOPO_ID_PEAKMETER \ |
| 6937 | 0x00010D83 |
| 6938 | #define ASM_STREAM_POSTPROCOPO_ID_NONE \ |
| 6939 | 0x00010C68 |
| 6940 | #define ASM_STREAM_POSTPROCOPO_ID_MCH_PEAK_VOL \ |
| 6941 | 0x00010D8B |
| 6942 | #define ASM_STREAM_PREPROCOPO_ID_DEFAULT \ |
| 6943 | ASM_STREAM_POSTPROCOPO_ID_DEFAULT |
| 6944 | #define ASM_STREAM_PREPROCOPO_ID_NONE \ |
| 6945 | ASM_STREAM_POSTPROCOPO_ID_NONE |
| 6946 | #define ADM_CMD_COPP_OPENOPOLOGY_ID_NONE_AUDIO_COPP \ |
| 6947 | 0x00010312 |
| 6948 | #define ADM_CMD_COPP_OPENOPOLOGY_ID_SPEAKER_MONO_AUDIO_COPP \ |
| 6949 | 0x00010313 |
| 6950 | #define ADM_CMD_COPP_OPENOPOLOGY_ID_SPEAKER_STEREO_AUDIO_COPP \ |
| 6951 | 0x00010314 |
| 6952 | #define ADM_CMD_COPP_OPENOPOLOGY_ID_SPEAKER_STEREO_IIR_AUDIO_COPP\ |
| 6953 | 0x00010704 |
| 6954 | #define ADM_CMD_COPP_OPENOPOLOGY_ID_SPEAKER_MONO_AUDIO_COPP_MBDRCV2\ |
| 6955 | 0x0001070D |
| 6956 | #define ADM_CMD_COPP_OPENOPOLOGY_ID_SPEAKER_STEREO_AUDIO_COPP_MBDRCV2\ |
| 6957 | 0x0001070E |
| 6958 | #define ADM_CMD_COPP_OPENOPOLOGY_ID_SPEAKER_STEREO_IIR_AUDIO_COPP_MBDRCV2\ |
| 6959 | 0x0001070F |
| 6960 | #define ADM_CMD_COPP_OPENOPOLOGY_ID_SPEAKER_STEREO_AUDIO_COPP_MBDRC_V3 \ |
| 6961 | 0x11000000 |
| 6962 | #define ADM_CMD_COPP_OPENOPOLOGY_ID_SPEAKER_MCH_PEAK_VOL \ |
| 6963 | 0x0001031B |
| 6964 | #define ADM_CMD_COPP_OPENOPOLOGY_ID_MIC_MONO_AUDIO_COPP 0x00010315 |
| 6965 | #define ADM_CMD_COPP_OPENOPOLOGY_ID_MIC_STEREO_AUDIO_COPP 0x00010316 |
| 6966 | #define AUDPROC_COPPOPOLOGY_ID_MCHAN_IIR_AUDIO 0x00010715 |
| 6967 | #define ADM_CMD_COPP_OPENOPOLOGY_ID_DEFAULT_AUDIO_COPP 0x00010BE3 |
| 6968 | #define ADM_CMD_COPP_OPENOPOLOGY_ID_PEAKMETER_AUDIO_COPP 0x00010317 |
| 6969 | #define AUDPROC_MODULE_ID_AIG 0x00010716 |
| 6970 | #define AUDPROC_PARAM_ID_AIG_ENABLE 0x00010717 |
| 6971 | #define AUDPROC_PARAM_ID_AIG_CONFIG 0x00010718 |
| 6972 | |
| 6973 | struct Audio_AigParam { |
| 6974 | uint16_t mode; |
| 6975 | /*< Mode word for enabling AIG/SIG mode . |
| 6976 | * Byte offset: 0 |
| 6977 | */ |
| 6978 | int16_t staticGainL16Q12; |
| 6979 | /*< Static input gain when aigMode is set to 1. |
| 6980 | * Byte offset: 2 |
| 6981 | */ |
| 6982 | int16_t initialGainDBL16Q7; |
| 6983 | /*<Initial value that the adaptive gain update starts from dB |
| 6984 | * Q7 Byte offset: 4 |
| 6985 | */ |
| 6986 | int16_t idealRMSDBL16Q7; |
| 6987 | /*<Average RMS level that AIG attempts to achieve Q8.7 |
| 6988 | * Byte offset: 6 |
| 6989 | */ |
| 6990 | int32_t noiseGateL32; |
| 6991 | /*Threshold below which signal is considered as noise and AIG |
| 6992 | * Byte offset: 8 |
| 6993 | */ |
| 6994 | int32_t minGainL32Q15; |
| 6995 | /*Minimum gain that can be provided by AIG Q16.15 |
| 6996 | * Byte offset: 12 |
| 6997 | */ |
| 6998 | int32_t maxGainL32Q15; |
| 6999 | /*Maximum gain that can be provided by AIG Q16.15 |
| 7000 | * Byte offset: 16 |
| 7001 | */ |
| 7002 | uint32_t gainAtRtUL32Q31; |
| 7003 | /*Attack/release time for AIG update Q1.31 |
| 7004 | * Byte offset: 20 |
| 7005 | */ |
| 7006 | uint32_t longGainAtRtUL32Q31; |
| 7007 | /*Long attack/release time while updating gain for |
| 7008 | * noise/silence Q1.31 Byte offset: 24 |
| 7009 | */ |
| 7010 | |
| 7011 | uint32_t rmsTavUL32Q32; |
| 7012 | /* RMS smoothing time constant used for long-term RMS estimate |
| 7013 | * Q0.32 Byte offset: 28 |
| 7014 | */ |
| 7015 | |
| 7016 | uint32_t gainUpdateStartTimMsUL32Q0; |
| 7017 | /* The waiting time before which AIG starts to apply adaptive |
| 7018 | * gain update Q32.0 Byte offset: 32 |
| 7019 | */ |
| 7020 | |
| 7021 | } __packed; |
| 7022 | |
| 7023 | |
| 7024 | #define ADM_MODULE_ID_EANS 0x00010C4A |
| 7025 | #define ADM_PARAM_ID_EANS_ENABLE 0x00010C4B |
| 7026 | #define ADM_PARAM_ID_EANS_PARAMS 0x00010C4C |
| 7027 | |
| 7028 | struct adm_eans_enable { |
| 7029 | |
| 7030 | uint32_t enable_flag; |
| 7031 | /*< Specifies whether EANS is disabled (0) or enabled |
| 7032 | * (nonzero). |
| 7033 | * This is supported only for sampling rates of 8, 12, 16, 24, 32, |
| 7034 | * and 48 kHz. It is not supported for sampling rates of 11.025, |
| 7035 | * 22.05, or 44.1 kHz. |
| 7036 | */ |
| 7037 | |
| 7038 | } __packed; |
| 7039 | |
| 7040 | |
| 7041 | struct adm_eans_params { |
| 7042 | int16_t eans_mode; |
| 7043 | /*< Mode word for enabling/disabling submodules. |
| 7044 | * Byte offset: 0 |
| 7045 | */ |
| 7046 | |
| 7047 | int16_t eans_input_gain; |
| 7048 | /*< Q2.13 input gain to the EANS module. |
| 7049 | * Byte offset: 2 |
| 7050 | */ |
| 7051 | |
| 7052 | int16_t eans_output_gain; |
| 7053 | /*< Q2.13 output gain to the EANS module. |
| 7054 | * Byte offset: 4 |
| 7055 | */ |
| 7056 | |
| 7057 | int16_t eansarget_ns; |
| 7058 | /*< Target noise suppression level in dB. |
| 7059 | * Byte offset: 6 |
| 7060 | */ |
| 7061 | |
| 7062 | int16_t eans_s_alpha; |
| 7063 | /*< Q3.12 over-subtraction factor for stationary noise |
| 7064 | * suppression. |
| 7065 | * Byte offset: 8 |
| 7066 | */ |
| 7067 | |
| 7068 | int16_t eans_n_alpha; |
| 7069 | /* < Q3.12 over-subtraction factor for nonstationary noise |
| 7070 | * suppression. |
| 7071 | * Byte offset: 10 |
| 7072 | */ |
| 7073 | |
| 7074 | int16_t eans_n_alphamax; |
| 7075 | /*< Q3.12 maximum over-subtraction factor for nonstationary |
| 7076 | * noise suppression. |
| 7077 | * Byte offset: 12 |
| 7078 | */ |
| 7079 | int16_t eans_e_alpha; |
| 7080 | /*< Q15 scaling factor for excess noise suppression. |
| 7081 | * Byte offset: 14 |
| 7082 | */ |
| 7083 | |
| 7084 | int16_t eans_ns_snrmax; |
| 7085 | /*< Upper boundary in dB for SNR estimation. |
| 7086 | * Byte offset: 16 |
| 7087 | */ |
| 7088 | |
| 7089 | int16_t eans_sns_block; |
| 7090 | /*< Quarter block size for stationary noise suppression. |
| 7091 | * Byte offset: 18 |
| 7092 | */ |
| 7093 | |
| 7094 | int16_t eans_ns_i; |
| 7095 | /*< Initialization block size for noise suppression. |
| 7096 | * Byte offset: 20 |
| 7097 | */ |
| 7098 | int16_t eans_np_scale; |
| 7099 | /*< Power scale factor for nonstationary noise update. |
| 7100 | * Byte offset: 22 |
| 7101 | */ |
| 7102 | |
| 7103 | int16_t eans_n_lambda; |
| 7104 | /*< Smoothing factor for higher level nonstationary noise |
| 7105 | * update. |
| 7106 | * Byte offset: 24 |
| 7107 | */ |
| 7108 | |
| 7109 | int16_t eans_n_lambdaf; |
| 7110 | /*< Medium averaging factor for noise update. |
| 7111 | * Byte offset: 26 |
| 7112 | */ |
| 7113 | |
| 7114 | int16_t eans_gs_bias; |
| 7115 | /*< Bias factor in dB for gain calculation. |
| 7116 | * Byte offset: 28 |
| 7117 | */ |
| 7118 | |
| 7119 | int16_t eans_gs_max; |
| 7120 | /*< SNR lower boundary in dB for aggressive gain calculation. |
| 7121 | * Byte offset: 30 |
| 7122 | */ |
| 7123 | |
| 7124 | int16_t eans_s_alpha_hb; |
| 7125 | /*< Q3.12 over-subtraction factor for high-band stationary |
| 7126 | * noise suppression. |
| 7127 | * Byte offset: 32 |
| 7128 | */ |
| 7129 | |
| 7130 | int16_t eans_n_alphamax_hb; |
| 7131 | /*< Q3.12 maximum over-subtraction factor for high-band |
| 7132 | * nonstationary noise suppression. |
| 7133 | * Byte offset: 34 |
| 7134 | */ |
| 7135 | |
| 7136 | int16_t eans_e_alpha_hb; |
| 7137 | /*< Q15 scaling factor for high-band excess noise suppression. |
| 7138 | * Byte offset: 36 |
| 7139 | */ |
| 7140 | |
| 7141 | int16_t eans_n_lambda0; |
| 7142 | /*< Smoothing factor for nonstationary noise update during |
| 7143 | * speech activity. |
| 7144 | * Byte offset: 38 |
| 7145 | */ |
| 7146 | |
| 7147 | int16_t thresh; |
| 7148 | /*< Threshold for generating a binary VAD decision. |
| 7149 | * Byte offset: 40 |
| 7150 | */ |
| 7151 | |
| 7152 | int16_t pwr_scale; |
| 7153 | /*< Indirect lower boundary of the noise level estimate. |
| 7154 | * Byte offset: 42 |
| 7155 | */ |
| 7156 | |
| 7157 | int16_t hangover_max; |
| 7158 | /*< Avoids mid-speech clipping and reliably detects weak speech |
| 7159 | * bursts at the end of speech activity. |
| 7160 | * Byte offset: 44 |
| 7161 | */ |
| 7162 | |
| 7163 | int16_t alpha_snr; |
| 7164 | /*< Controls responsiveness of the VAD. |
| 7165 | * Byte offset: 46 |
| 7166 | */ |
| 7167 | |
| 7168 | int16_t snr_diff_max; |
| 7169 | /*< Maximum SNR difference. Decreasing this parameter value may |
| 7170 | * help in making correct decisions during abrupt changes; however, |
| 7171 | * decreasing too much may increase false alarms during long |
| 7172 | * pauses/silences. |
| 7173 | * Byte offset: 48 |
| 7174 | */ |
| 7175 | |
| 7176 | int16_t snr_diff_min; |
| 7177 | /*< Minimum SNR difference. Decreasing this parameter value may |
| 7178 | * help in making correct decisions during abrupt changes; however, |
| 7179 | * decreasing too much may increase false alarms during long |
| 7180 | * pauses/silences. |
| 7181 | * Byte offset: 50 |
| 7182 | */ |
| 7183 | |
| 7184 | int16_t init_length; |
| 7185 | /*< Defines the number of frames for which a noise level |
| 7186 | * estimate is set to a fixed value. |
| 7187 | * Byte offset: 52 |
| 7188 | */ |
| 7189 | |
| 7190 | int16_t max_val; |
| 7191 | /*< Defines the upper limit of the noise level. |
| 7192 | * Byte offset: 54 |
| 7193 | */ |
| 7194 | |
| 7195 | int16_t init_bound; |
| 7196 | /*< Defines the initial bounding value for the noise level |
| 7197 | * estimate. This is used during the initial segment defined by the |
| 7198 | * init_length parameter. |
| 7199 | * Byte offset: 56 |
| 7200 | */ |
| 7201 | |
| 7202 | int16_t reset_bound; |
| 7203 | /*< Reset boundary for noise tracking. |
| 7204 | * Byte offset: 58 |
| 7205 | */ |
| 7206 | |
| 7207 | int16_t avar_scale; |
| 7208 | /*< Defines the bias factor in noise estimation. |
| 7209 | * Byte offset: 60 |
| 7210 | */ |
| 7211 | |
| 7212 | int16_t sub_nc; |
| 7213 | /*< Defines the window length for noise estimation. |
| 7214 | * Byte offset: 62 |
| 7215 | */ |
| 7216 | |
| 7217 | int16_t spow_min; |
| 7218 | /*< Defines the minimum signal power required to update the |
| 7219 | * boundaries for the noise floor estimate. |
| 7220 | * Byte offset: 64 |
| 7221 | */ |
| 7222 | |
| 7223 | int16_t eans_gs_fast; |
| 7224 | /*< Fast smoothing factor for postprocessor gain. |
| 7225 | * Byte offset: 66 |
| 7226 | */ |
| 7227 | |
| 7228 | int16_t eans_gs_med; |
| 7229 | /*< Medium smoothing factor for postprocessor gain. |
| 7230 | * Byte offset: 68 |
| 7231 | */ |
| 7232 | |
| 7233 | int16_t eans_gs_slow; |
| 7234 | /*< Slow smoothing factor for postprocessor gain. |
| 7235 | * Byte offset: 70 |
| 7236 | */ |
| 7237 | |
| 7238 | int16_t eans_swb_salpha; |
| 7239 | /*< Q3.12 super wideband aggressiveness factor for stationary |
| 7240 | * noise suppression. |
| 7241 | * Byte offset: 72 |
| 7242 | */ |
| 7243 | |
| 7244 | int16_t eans_swb_nalpha; |
| 7245 | /*< Q3.12 super wideband aggressiveness factor for |
| 7246 | * nonstationary noise suppression. |
| 7247 | * Byte offset: 74 |
| 7248 | */ |
| 7249 | } __packed; |
| 7250 | #define ADM_MODULE_IDX_MIC_GAIN_CTRL 0x00010C35 |
| 7251 | |
| 7252 | /* @addtogroup audio_pp_param_ids |
| 7253 | * ID of the Tx mic gain control parameter used by the |
| 7254 | * #ADM_MODULE_IDX_MIC_GAIN_CTRL module. |
| 7255 | * @messagepayload |
| 7256 | * @structure{admx_mic_gain} |
| 7257 | * @tablespace |
| 7258 | * @inputtable{Audio_Postproc_ADM_PARAM_IDX_MIC_GAIN.tex} |
| 7259 | */ |
| 7260 | #define ADM_PARAM_IDX_MIC_GAIN 0x00010C36 |
| 7261 | |
| 7262 | /* Structure for a Tx mic gain parameter for the mic gain |
| 7263 | * control module. |
| 7264 | */ |
| 7265 | |
| 7266 | |
| 7267 | /* @brief Payload of the #ADM_PARAM_IDX_MIC_GAIN parameter in the |
| 7268 | * Tx Mic Gain Control module. |
| 7269 | */ |
| 7270 | struct admx_mic_gain { |
| 7271 | uint16_t tx_mic_gain; |
| 7272 | /*< Linear gain in Q13 format. */ |
| 7273 | |
| 7274 | uint16_t reserved; |
| 7275 | /*< Clients must set this field to zero. */ |
| 7276 | } __packed; |
| 7277 | |
| 7278 | struct adm_set_mic_gain_params { |
| 7279 | struct adm_cmd_set_pp_params_v5 params; |
| 7280 | struct adm_param_data_v5 data; |
| 7281 | struct admx_mic_gain mic_gain_data; |
| 7282 | } __packed; |
| 7283 | |
| 7284 | /* end_addtogroup audio_pp_param_ids */ |
| 7285 | |
| 7286 | /* @ingroup audio_pp_module_ids |
| 7287 | * ID of the Rx Codec Gain Control module. |
| 7288 | * |
| 7289 | * This module supports the following parameter ID: |
| 7290 | * - #ADM_PARAM_ID_RX_CODEC_GAIN |
| 7291 | */ |
| 7292 | #define ADM_MODULE_ID_RX_CODEC_GAIN_CTRL 0x00010C37 |
| 7293 | |
| 7294 | /* @addtogroup audio_pp_param_ids |
| 7295 | * ID of the Rx codec gain control parameter used by the |
| 7296 | * #ADM_MODULE_ID_RX_CODEC_GAIN_CTRL module. |
| 7297 | * |
| 7298 | * @messagepayload |
| 7299 | * @structure{adm_rx_codec_gain} |
| 7300 | * @tablespace |
| 7301 | * @inputtable{Audio_Postproc_ADM_PARAM_ID_RX_CODEC_GAIN.tex} |
| 7302 | */ |
| 7303 | #define ADM_PARAM_ID_RX_CODEC_GAIN 0x00010C38 |
| 7304 | |
| 7305 | /* Structure for the Rx common codec gain control module. */ |
| 7306 | |
| 7307 | |
| 7308 | /* @brief Payload of the #ADM_PARAM_ID_RX_CODEC_GAIN parameter |
| 7309 | * in the Rx Codec Gain Control module. |
| 7310 | */ |
| 7311 | |
| 7312 | |
| 7313 | struct adm_rx_codec_gain { |
| 7314 | uint16_t rx_codec_gain; |
| 7315 | /* Linear gain in Q13 format. */ |
| 7316 | |
| 7317 | uint16_t reserved; |
| 7318 | /* Clients must set this field to zero.*/ |
| 7319 | } __packed; |
| 7320 | |
| 7321 | /* end_addtogroup audio_pp_param_ids */ |
| 7322 | |
| 7323 | /* @ingroup audio_pp_module_ids |
| 7324 | * ID of the HPF Tuning Filter module on the Tx path. |
| 7325 | * This module supports the following parameter IDs: |
| 7326 | * - #ADM_PARAM_ID_HPF_IIRX_FILTER_ENABLE_CONFIG |
| 7327 | * - #ADM_PARAM_ID_HPF_IIRX_FILTER_PRE_GAIN |
| 7328 | * - #ADM_PARAM_ID_HPF_IIRX_FILTER_CONFIG_PARAMS |
| 7329 | */ |
| 7330 | #define ADM_MODULE_ID_HPF_IIRX_FILTER 0x00010C3D |
| 7331 | |
| 7332 | /* @addtogroup audio_pp_param_ids */ |
| 7333 | /* ID of the Tx HPF IIR filter enable parameter used by the |
| 7334 | * #ADM_MODULE_ID_HPF_IIRX_FILTER module. |
| 7335 | * @parspace Message payload |
| 7336 | * @structure{adm_hpfx_iir_filter_enable_cfg} |
| 7337 | * @tablespace |
| 7338 | * @inputtable{Audio_Postproc_ADM_PARAM_ID_HPF_IIRX_FILTER_ENABLE_CONFIG.tex} |
| 7339 | */ |
| 7340 | #define ADM_PARAM_ID_HPF_IIRX_FILTER_ENABLE_CONFIG 0x00010C3E |
| 7341 | |
| 7342 | /* ID of the Tx HPF IIR filter pregain parameter used by the |
| 7343 | * #ADM_MODULE_ID_HPF_IIRX_FILTER module. |
| 7344 | * @parspace Message payload |
| 7345 | * @structure{adm_hpfx_iir_filter_pre_gain} |
| 7346 | * @tablespace |
| 7347 | * @inputtable{Audio_Postproc_ADM_PARAM_ID_HPF_IIRX_FILTER_PRE_GAIN.tex} |
| 7348 | */ |
| 7349 | #define ADM_PARAM_ID_HPF_IIRX_FILTER_PRE_GAIN 0x00010C3F |
| 7350 | |
| 7351 | /* ID of the Tx HPF IIR filter configuration parameters used by the |
| 7352 | * #ADM_MODULE_ID_HPF_IIRX_FILTER module. |
| 7353 | * @parspace Message payload |
| 7354 | * @structure{adm_hpfx_iir_filter_cfg_params} |
| 7355 | * @tablespace |
| 7356 | * @inputtable{Audio_Postproc_ADM_PARAM_ID_HPF_IIRX_FILTER_CONFIG_PA |
| 7357 | * RAMS.tex} |
| 7358 | */ |
| 7359 | #define ADM_PARAM_ID_HPF_IIRX_FILTER_CONFIG_PARAMS 0x00010C40 |
| 7360 | |
| 7361 | /* Structure for enabling a configuration parameter for |
| 7362 | * the HPF IIR tuning filter module on the Tx path. |
| 7363 | */ |
| 7364 | |
| 7365 | /* @brief Payload of the #ADM_PARAM_ID_HPF_IIRX_FILTER_ENABLE_CONFIG |
| 7366 | * parameter in the Tx path HPF Tuning Filter module. |
| 7367 | */ |
| 7368 | struct adm_hpfx_iir_filter_enable_cfg { |
| 7369 | uint32_t enable_flag; |
| 7370 | /* Specifies whether the HPF tuning filter is disabled (0) or |
| 7371 | * enabled (nonzero). |
| 7372 | */ |
| 7373 | } __packed; |
| 7374 | |
| 7375 | |
| 7376 | /* Structure for the pregain parameter for the HPF |
| 7377 | * IIR tuning filter module on the Tx path. |
| 7378 | */ |
| 7379 | |
| 7380 | |
| 7381 | /* @brief Payload of the #ADM_PARAM_ID_HPF_IIRX_FILTER_PRE_GAIN parameter |
| 7382 | * in the Tx path HPF Tuning Filter module. |
| 7383 | */ |
| 7384 | struct adm_hpfx_iir_filter_pre_gain { |
| 7385 | uint16_t pre_gain; |
| 7386 | /* Linear gain in Q13 format. */ |
| 7387 | |
| 7388 | uint16_t reserved; |
| 7389 | /* Clients must set this field to zero.*/ |
| 7390 | } __packed; |
| 7391 | |
| 7392 | |
| 7393 | /* Structure for the configuration parameter for the |
| 7394 | * HPF IIR tuning filter module on the Tx path. |
| 7395 | */ |
| 7396 | |
| 7397 | |
| 7398 | /* @brief Payload of the #ADM_PARAM_ID_HPF_IIRX_FILTER_CONFIG_PARAMS |
| 7399 | * parameters in the Tx path HPF Tuning Filter module. \n |
| 7400 | * \n |
| 7401 | * This structure is followed by tuning filter coefficients as follows: \n |
| 7402 | * - Sequence of int32_t FilterCoeffs. |
| 7403 | * Each band has five coefficients, each in int32_t format in the order of |
| 7404 | * b0, b1, b2, a1, a2. |
| 7405 | * - Sequence of int16_t NumShiftFactor. |
| 7406 | * One int16_t per band. The numerator shift factor is related to the Q |
| 7407 | * factor of the filter coefficients. |
| 7408 | * - Sequence of uint16_t PanSetting. |
| 7409 | * One uint16_t for each band to indicate application of the filter to |
| 7410 | * left (0), right (1), or both (2) channels. |
| 7411 | */ |
| 7412 | struct adm_hpfx_iir_filter_cfg_params { |
| 7413 | uint16_t num_biquad_stages; |
| 7414 | /*< Number of bands. |
| 7415 | * Supported values: 0 to 20 |
| 7416 | */ |
| 7417 | |
| 7418 | uint16_t reserved; |
| 7419 | /*< Clients must set this field to zero.*/ |
| 7420 | } __packed; |
| 7421 | |
| 7422 | /* end_addtogroup audio_pp_module_ids */ |
| 7423 | |
| 7424 | /* @addtogroup audio_pp_module_ids */ |
| 7425 | /* ID of the Tx path IIR Tuning Filter module. |
| 7426 | * This module supports the following parameter IDs: |
| 7427 | * - #ADM_PARAM_IDX_IIR_FILTER_ENABLE_CONFIG |
| 7428 | */ |
| 7429 | #define ADM_MODULE_IDX_IIR_FILTER 0x00010C41 |
| 7430 | |
| 7431 | /* ID of the Rx path IIR Tuning Filter module for the left channel. |
| 7432 | * The parameter IDs of the IIR tuning filter module |
| 7433 | * (#ASM_MODULE_ID_IIRUNING_FILTER) are used for the left IIR Rx tuning |
| 7434 | * filter. |
| 7435 | * |
| 7436 | * Pan parameters are not required for this per-channel IIR filter; the pan |
| 7437 | * parameters are ignored by this module. |
| 7438 | */ |
| 7439 | #define ADM_MODULE_ID_LEFT_IIRUNING_FILTER 0x00010705 |
| 7440 | |
| 7441 | /* ID of the the Rx path IIR Tuning Filter module for the right |
| 7442 | * channel. |
| 7443 | * The parameter IDs of the IIR tuning filter module |
| 7444 | * (#ASM_MODULE_ID_IIRUNING_FILTER) are used for the right IIR Rx |
| 7445 | * tuning filter. |
| 7446 | * |
| 7447 | * Pan parameters are not required for this per-channel IIR filter; |
| 7448 | * the pan parameters are ignored by this module. |
| 7449 | */ |
| 7450 | #define ADM_MODULE_ID_RIGHT_IIRUNING_FILTER 0x00010706 |
| 7451 | |
| 7452 | /* end_addtogroup audio_pp_module_ids */ |
| 7453 | |
| 7454 | /* @addtogroup audio_pp_param_ids */ |
| 7455 | |
| 7456 | /* ID of the Tx IIR filter enable parameter used by the |
| 7457 | * #ADM_MODULE_IDX_IIR_FILTER module. |
| 7458 | * @parspace Message payload |
| 7459 | * @structure{admx_iir_filter_enable_cfg} |
| 7460 | * @tablespace |
| 7461 | * @inputtable{Audio_Postproc_ADM_PARAM_IDX_IIR_FILTER_ENABLE_CONFIG.tex} |
| 7462 | */ |
| 7463 | #define ADM_PARAM_IDX_IIR_FILTER_ENABLE_CONFIG 0x00010C42 |
| 7464 | |
| 7465 | /* ID of the Tx IIR filter pregain parameter used by the |
| 7466 | * #ADM_MODULE_IDX_IIR_FILTER module. |
| 7467 | * @parspace Message payload |
| 7468 | * @structure{admx_iir_filter_pre_gain} |
| 7469 | * @tablespace |
| 7470 | * @inputtable{Audio_Postproc_ADM_PARAM_IDX_IIR_FILTER_PRE_GAIN.tex} |
| 7471 | */ |
| 7472 | #define ADM_PARAM_IDX_IIR_FILTER_PRE_GAIN 0x00010C43 |
| 7473 | |
| 7474 | /* ID of the Tx IIR filter configuration parameters used by the |
| 7475 | * #ADM_MODULE_IDX_IIR_FILTER module. |
| 7476 | * @parspace Message payload |
| 7477 | * @structure{admx_iir_filter_cfg_params} |
| 7478 | * @tablespace |
| 7479 | * @inputtable{Audio_Postproc_ADM_PARAM_IDX_IIR_FILTER_CONFIG_PARAMS.tex} |
| 7480 | */ |
| 7481 | #define ADM_PARAM_IDX_IIR_FILTER_CONFIG_PARAMS 0x00010C44 |
| 7482 | |
| 7483 | /* Structure for enabling the configuration parameter for the |
| 7484 | * IIR filter module on the Tx path. |
| 7485 | */ |
| 7486 | |
| 7487 | /* @brief Payload of the #ADM_PARAM_IDX_IIR_FILTER_ENABLE_CONFIG |
| 7488 | * parameter in the Tx Path IIR Tuning Filter module. |
| 7489 | */ |
| 7490 | |
| 7491 | struct admx_iir_filter_enable_cfg { |
| 7492 | uint32_t enable_flag; |
| 7493 | /*< Specifies whether the IIR tuning filter is disabled (0) or |
| 7494 | * enabled (nonzero). |
| 7495 | */ |
| 7496 | |
| 7497 | } __packed; |
| 7498 | |
| 7499 | |
| 7500 | /* Structure for the pregain parameter for the |
| 7501 | * IIR filter module on the Tx path. |
| 7502 | */ |
| 7503 | |
| 7504 | |
| 7505 | /* @brief Payload of the #ADM_PARAM_IDX_IIR_FILTER_PRE_GAIN |
| 7506 | * parameter in the Tx Path IIR Tuning Filter module. |
| 7507 | */ |
| 7508 | |
| 7509 | struct admx_iir_filter_pre_gain { |
| 7510 | uint16_t pre_gain; |
| 7511 | /*< Linear gain in Q13 format. */ |
| 7512 | |
| 7513 | uint16_t reserved; |
| 7514 | /*< Clients must set this field to zero.*/ |
| 7515 | } __packed; |
| 7516 | |
| 7517 | |
| 7518 | /* Structure for the configuration parameter for the |
| 7519 | * IIR filter module on the Tx path. |
| 7520 | */ |
| 7521 | |
| 7522 | |
| 7523 | /* @brief Payload of the #ADM_PARAM_IDX_IIR_FILTER_CONFIG_PARAMS |
| 7524 | * parameter in the Tx Path IIR Tuning Filter module. \n |
| 7525 | * \n |
| 7526 | * This structure is followed by the HPF IIR filter coefficients on |
| 7527 | * the Tx path as follows: \n |
| 7528 | * - Sequence of int32_t ulFilterCoeffs. Each band has five |
| 7529 | * coefficients, each in int32_t format in the order of b0, b1, b2, |
| 7530 | * a1, a2. |
| 7531 | * - Sequence of int16_t sNumShiftFactor. One int16_t per band. The |
| 7532 | * numerator shift factor is related to the Q factor of the filter |
| 7533 | * coefficients. |
| 7534 | * - Sequence of uint16_t usPanSetting. One uint16_t for each band |
| 7535 | * to indicate if the filter is applied to left (0), right (1), or |
| 7536 | * both (2) channels. |
| 7537 | */ |
| 7538 | struct admx_iir_filter_cfg_params { |
| 7539 | uint16_t num_biquad_stages; |
| 7540 | /*< Number of bands. |
| 7541 | * Supported values: 0 to 20 |
| 7542 | */ |
| 7543 | |
| 7544 | uint16_t reserved; |
| 7545 | /*< Clients must set this field to zero.*/ |
| 7546 | } __packed; |
| 7547 | |
| 7548 | /* end_addtogroup audio_pp_module_ids */ |
| 7549 | |
| 7550 | /* @ingroup audio_pp_module_ids |
| 7551 | * ID of the QEnsemble module. |
| 7552 | * This module supports the following parameter IDs: |
| 7553 | * - #ADM_PARAM_ID_QENSEMBLE_ENABLE |
| 7554 | * - #ADM_PARAM_ID_QENSEMBLE_BACKGAIN |
| 7555 | * - #ADM_PARAM_ID_QENSEMBLE_SET_NEW_ANGLE |
| 7556 | */ |
| 7557 | #define ADM_MODULE_ID_QENSEMBLE 0x00010C59 |
| 7558 | |
| 7559 | /* @addtogroup audio_pp_param_ids */ |
| 7560 | /* ID of the QEnsemble enable parameter used by the |
| 7561 | * #ADM_MODULE_ID_QENSEMBLE module. |
| 7562 | * @messagepayload |
| 7563 | * @structure{adm_qensemble_enable} |
| 7564 | * @tablespace |
| 7565 | * @inputtable{Audio_Postproc_ADM_PARAM_ID_QENSEMBLE_ENABLE.tex} |
| 7566 | */ |
| 7567 | #define ADM_PARAM_ID_QENSEMBLE_ENABLE 0x00010C60 |
| 7568 | |
| 7569 | /* ID of the QEnsemble back gain parameter used by the |
| 7570 | * #ADM_MODULE_ID_QENSEMBLE module. |
| 7571 | * @messagepayload |
| 7572 | * @structure{adm_qensemble_param_backgain} |
| 7573 | * @tablespace |
| 7574 | * @inputtable{Audio_Postproc_ADM_PARAM_ID_QENSEMBLE_BACKGAIN.tex} |
| 7575 | */ |
| 7576 | #define ADM_PARAM_ID_QENSEMBLE_BACKGAIN 0x00010C61 |
| 7577 | |
| 7578 | /* ID of the QEnsemble new angle parameter used by the |
| 7579 | * #ADM_MODULE_ID_QENSEMBLE module. |
| 7580 | * @messagepayload |
| 7581 | * @structure{adm_qensemble_param_set_new_angle} |
| 7582 | * @tablespace |
| 7583 | * @inputtable{Audio_Postproc_ADM_PARAM_ID_QENSEMBLE_SET_NEW_ANGLE.tex} |
| 7584 | */ |
| 7585 | #define ADM_PARAM_ID_QENSEMBLE_SET_NEW_ANGLE 0x00010C62 |
| 7586 | |
| 7587 | /* Structure for enabling the configuration parameter for the |
| 7588 | * QEnsemble module. |
| 7589 | */ |
| 7590 | |
| 7591 | |
| 7592 | /* @brief Payload of the #ADM_PARAM_ID_QENSEMBLE_ENABLE |
| 7593 | * parameter used by the QEnsemble module. |
| 7594 | */ |
| 7595 | struct adm_qensemble_enable { |
| 7596 | uint32_t enable_flag; |
| 7597 | /*< Specifies whether the QEnsemble module is disabled (0) or enabled |
| 7598 | * (nonzero). |
| 7599 | */ |
| 7600 | } __packed; |
| 7601 | |
| 7602 | |
| 7603 | /* Structure for the background gain for the QEnsemble module. */ |
| 7604 | |
| 7605 | |
| 7606 | /* @brief Payload of the #ADM_PARAM_ID_QENSEMBLE_BACKGAIN |
| 7607 | * parameter used by |
| 7608 | * the QEnsemble module. |
| 7609 | */ |
| 7610 | struct adm_qensemble_param_backgain { |
| 7611 | int16_t back_gain; |
| 7612 | /*< Linear gain in Q15 format. |
| 7613 | * Supported values: 0 to 32767 |
| 7614 | */ |
| 7615 | |
| 7616 | uint16_t reserved; |
| 7617 | /*< Clients must set this field to zero.*/ |
| 7618 | } __packed; |
| 7619 | /* Structure for setting a new angle for the QEnsemble module. */ |
| 7620 | |
| 7621 | |
| 7622 | /* @brief Payload of the #ADM_PARAM_ID_QENSEMBLE_SET_NEW_ANGLE |
| 7623 | * parameter used |
| 7624 | * by the QEnsemble module. |
| 7625 | */ |
| 7626 | struct adm_qensemble_param_set_new_angle { |
| 7627 | int16_t new_angle; |
| 7628 | /*< New angle in degrees. |
| 7629 | * Supported values: 0 to 359 |
| 7630 | */ |
| 7631 | |
| 7632 | int16_t time_ms; |
| 7633 | /*< Transition time in milliseconds to set the new angle. |
| 7634 | * Supported values: 0 to 32767 |
| 7635 | */ |
| 7636 | } __packed; |
| 7637 | |
| 7638 | |
| 7639 | #define ADM_CMD_GET_PP_TOPO_MODULE_LIST 0x00010349 |
| 7640 | #define ADM_CMDRSP_GET_PP_TOPO_MODULE_LIST 0x00010350 |
| 7641 | #define AUDPROC_PARAM_ID_ENABLE 0x00010904 |
| 7642 | /* |
| 7643 | * Payload of the ADM_CMD_GET_PP_TOPO_MODULE_LIST command. |
| 7644 | */ |
| 7645 | struct adm_cmd_get_pp_topo_module_list_t { |
| 7646 | struct apr_hdr hdr; |
| 7647 | /* Lower 32 bits of the 64-bit parameter data payload address. */ |
| 7648 | uint32_t data_payload_addr_lsw; |
| 7649 | /* |
| 7650 | * Upper 32 bits of the 64-bit parameter data payload address. |
| 7651 | * |
| 7652 | * |
| 7653 | * The size of the shared memory, if specified, must be large enough to |
| 7654 | * contain the entire parameter data payload, including the module ID, |
| 7655 | * parameter ID, parameter size, and parameter values. |
| 7656 | */ |
| 7657 | uint32_t data_payload_addr_msw; |
| 7658 | /* |
| 7659 | * Unique identifier for an address. |
| 7660 | * |
| 7661 | * This memory map handle is returned by the aDSP through the |
| 7662 | * #ADM_CMD_SHARED_MEM_MAP_REGIONS command. |
| 7663 | * |
| 7664 | * @values |
| 7665 | * - Non-NULL -- On acknowledgment, the parameter data payloads begin at |
| 7666 | * the address specified (out-of-band) |
| 7667 | * - NULL -- The acknowledgment's payload contains the parameter data |
| 7668 | * (in-band) @tablebulletend |
| 7669 | */ |
| 7670 | uint32_t mem_map_handle; |
| 7671 | /* |
| 7672 | * Maximum data size of the list of modules. This |
| 7673 | * field is a multiple of 4 bytes. |
| 7674 | */ |
| 7675 | uint16_t param_max_size; |
| 7676 | /* This field must be set to zero. */ |
| 7677 | uint16_t reserved; |
| 7678 | } __packed; |
| 7679 | |
| 7680 | /* |
| 7681 | * Payload of the ADM_CMDRSP_GET_PP_TOPO_MODULE_LIST message, which returns |
| 7682 | * module ids in response to an ADM_CMD_GET_PP_TOPO_MODULE_LIST command. |
| 7683 | * Immediately following this structure is the acknowledgment <b>module id |
| 7684 | * data variable payload</b> containing the pre/postprocessing module id |
| 7685 | * values. For an in-band scenario, the variable payload depends on the size |
| 7686 | * of the parameter. |
| 7687 | */ |
| 7688 | struct adm_cmd_rsp_get_pp_topo_module_list_t { |
| 7689 | /* Status message (error code). */ |
| 7690 | uint32_t status; |
| 7691 | } __packed; |
| 7692 | |
| 7693 | struct audproc_topology_module_id_info_t { |
| 7694 | uint32_t num_modules; |
| 7695 | } __packed; |
| 7696 | |
| 7697 | /* end_addtogroup audio_pp_module_ids */ |
| 7698 | |
| 7699 | /* @ingroup audio_pp_module_ids |
| 7700 | * ID of the Volume Control module pre/postprocessing block. |
| 7701 | * This module supports the following parameter IDs: |
| 7702 | * - #ASM_PARAM_ID_VOL_CTRL_MASTER_GAIN |
| 7703 | * - #ASM_PARAM_ID_MULTICHANNEL_GAIN |
| 7704 | * - #ASM_PARAM_ID_VOL_CTRL_MUTE_CONFIG |
| 7705 | * - #ASM_PARAM_ID_SOFT_VOL_STEPPING_PARAMETERS |
| 7706 | * - #ASM_PARAM_ID_SOFT_PAUSE_PARAMETERS |
| 7707 | * - #ASM_PARAM_ID_MULTICHANNEL_GAIN |
| 7708 | * - #ASM_PARAM_ID_MULTICHANNEL_MUTE |
| 7709 | */ |
| 7710 | #define ASM_MODULE_ID_VOL_CTRL 0x00010BFE |
| 7711 | #define ASM_MODULE_ID_VOL_CTRL2 0x00010910 |
| 7712 | #define AUDPROC_MODULE_ID_VOL_CTRL ASM_MODULE_ID_VOL_CTRL |
| 7713 | |
| 7714 | /* @addtogroup audio_pp_param_ids */ |
| 7715 | /* ID of the master gain parameter used by the #ASM_MODULE_ID_VOL_CTRL |
| 7716 | * module. |
| 7717 | * @messagepayload |
| 7718 | * @structure{asm_volume_ctrl_master_gain} |
| 7719 | * @tablespace |
| 7720 | * @inputtable{Audio_Postproc_ASM_PARAM_ID_VOL_CTRL_MASTER_GAIN.tex} |
| 7721 | */ |
| 7722 | #define ASM_PARAM_ID_VOL_CTRL_MASTER_GAIN 0x00010BFF |
| 7723 | #define AUDPROC_PARAM_ID_VOL_CTRL_MASTER_GAIN ASM_PARAM_ID_VOL_CTRL_MASTER_GAIN |
| 7724 | |
| 7725 | /* ID of the left/right channel gain parameter used by the |
| 7726 | * #ASM_MODULE_ID_VOL_CTRL module. |
| 7727 | * @messagepayload |
| 7728 | * @structure{asm_volume_ctrl_lr_chan_gain} |
| 7729 | * @tablespace |
| 7730 | * @inputtable{Audio_Postproc_ASM_PARAM_ID_MULTICHANNEL_GAIN.tex} |
| 7731 | */ |
| 7732 | #define ASM_PARAM_ID_VOL_CTRL_LR_CHANNEL_GAIN 0x00010C00 |
| 7733 | |
| 7734 | /* ID of the mute configuration parameter used by the |
| 7735 | * #ASM_MODULE_ID_VOL_CTRL module. |
| 7736 | * @messagepayload |
| 7737 | * @structure{asm_volume_ctrl_mute_config} |
| 7738 | * @tablespace |
| 7739 | * @inputtable{Audio_Postproc_ASM_PARAM_ID_VOL_CTRL_MUTE_CONFIG.tex} |
| 7740 | */ |
| 7741 | #define ASM_PARAM_ID_VOL_CTRL_MUTE_CONFIG 0x00010C01 |
| 7742 | |
| 7743 | /* ID of the soft stepping volume parameters used by the |
| 7744 | * #ASM_MODULE_ID_VOL_CTRL module. |
| 7745 | * @messagepayload |
| 7746 | * @structure{asm_soft_step_volume_params} |
| 7747 | * @tablespace |
| 7748 | * @inputtable{Audio_Postproc_ASM_PARAM_ID_SOFT_VOL_STEPPING_PARAMET |
| 7749 | * ERS.tex} |
| 7750 | */ |
| 7751 | #define ASM_PARAM_ID_SOFT_VOL_STEPPING_PARAMETERS 0x00010C29 |
| 7752 | #define AUDPROC_PARAM_ID_SOFT_VOL_STEPPING_PARAMETERS\ |
| 7753 | ASM_PARAM_ID_SOFT_VOL_STEPPING_PARAMETERS |
| 7754 | |
| 7755 | /* ID of the soft pause parameters used by the #ASM_MODULE_ID_VOL_CTRL |
| 7756 | * module. |
| 7757 | */ |
| 7758 | #define ASM_PARAM_ID_SOFT_PAUSE_PARAMETERS 0x00010D6A |
| 7759 | |
| 7760 | /* ID of the multiple-channel volume control parameters used by the |
| 7761 | * #ASM_MODULE_ID_VOL_CTRL module. |
| 7762 | */ |
| 7763 | #define ASM_PARAM_ID_MULTICHANNEL_GAIN 0x00010713 |
| 7764 | |
| 7765 | /* ID of the multiple-channel mute configuration parameters used by the |
| 7766 | * #ASM_MODULE_ID_VOL_CTRL module. |
| 7767 | */ |
| 7768 | |
| 7769 | #define ASM_PARAM_ID_MULTICHANNEL_MUTE 0x00010714 |
| 7770 | |
| 7771 | /* Structure for the master gain parameter for a volume control |
| 7772 | * module. |
| 7773 | */ |
| 7774 | |
| 7775 | |
| 7776 | /* @brief Payload of the #ASM_PARAM_ID_VOL_CTRL_MASTER_GAIN |
| 7777 | * parameter used by the Volume Control module. |
| 7778 | */ |
| 7779 | |
| 7780 | |
| 7781 | |
| 7782 | struct asm_volume_ctrl_master_gain { |
| 7783 | struct apr_hdr hdr; |
| 7784 | struct asm_stream_cmd_set_pp_params_v2 param; |
| 7785 | struct asm_stream_param_data_v2 data; |
| 7786 | uint16_t master_gain; |
| 7787 | /* Linear gain in Q13 format. */ |
| 7788 | |
| 7789 | uint16_t reserved; |
| 7790 | /* Clients must set this field to zero. */ |
| 7791 | } __packed; |
| 7792 | |
| 7793 | |
| 7794 | struct asm_volume_ctrl_lr_chan_gain { |
| 7795 | struct apr_hdr hdr; |
| 7796 | struct asm_stream_cmd_set_pp_params_v2 param; |
| 7797 | struct asm_stream_param_data_v2 data; |
| 7798 | |
| 7799 | uint16_t l_chan_gain; |
| 7800 | /*< Linear gain in Q13 format for the left channel. */ |
| 7801 | |
| 7802 | uint16_t r_chan_gain; |
| 7803 | /*< Linear gain in Q13 format for the right channel.*/ |
| 7804 | } __packed; |
| 7805 | |
| 7806 | |
| 7807 | /* Structure for the mute configuration parameter for a |
| 7808 | * volume control module. |
| 7809 | */ |
| 7810 | |
| 7811 | |
| 7812 | /* @brief Payload of the #ASM_PARAM_ID_VOL_CTRL_MUTE_CONFIG |
| 7813 | * parameter used by the Volume Control module. |
| 7814 | */ |
| 7815 | |
| 7816 | |
| 7817 | struct asm_volume_ctrl_mute_config { |
| 7818 | struct apr_hdr hdr; |
| 7819 | struct asm_stream_cmd_set_pp_params_v2 param; |
| 7820 | struct asm_stream_param_data_v2 data; |
| 7821 | uint32_t mute_flag; |
| 7822 | /*< Specifies whether mute is disabled (0) or enabled (nonzero).*/ |
| 7823 | |
| 7824 | } __packed; |
| 7825 | |
| 7826 | /* |
| 7827 | * Supported parameters for a soft stepping linear ramping curve. |
| 7828 | */ |
| 7829 | #define ASM_PARAM_SVC_RAMPINGCURVE_LINEAR 0 |
| 7830 | |
| 7831 | /* |
| 7832 | * Exponential ramping curve. |
| 7833 | */ |
| 7834 | #define ASM_PARAM_SVC_RAMPINGCURVE_EXP 1 |
| 7835 | |
| 7836 | /* |
| 7837 | * Logarithmic ramping curve. |
| 7838 | */ |
| 7839 | #define ASM_PARAM_SVC_RAMPINGCURVE_LOG 2 |
| 7840 | |
| 7841 | /* Structure for holding soft stepping volume parameters. */ |
| 7842 | |
| 7843 | |
| 7844 | /* Payload of the #ASM_PARAM_ID_SOFT_VOL_STEPPING_PARAMETERS |
| 7845 | * parameters used by the Volume Control module. |
| 7846 | */ |
| 7847 | struct asm_soft_step_volume_params { |
| 7848 | struct apr_hdr hdr; |
| 7849 | struct asm_stream_cmd_set_pp_params_v2 param; |
| 7850 | struct asm_stream_param_data_v2 data; |
| 7851 | uint32_t period; |
| 7852 | /*< Period in milliseconds. |
| 7853 | * Supported values: 0 to 15000 |
| 7854 | */ |
| 7855 | |
| 7856 | uint32_t step; |
| 7857 | /*< Step in microseconds. |
| 7858 | * Supported values: 0 to 15000000 |
| 7859 | */ |
| 7860 | |
| 7861 | uint32_t ramping_curve; |
| 7862 | /*< Ramping curve type. |
| 7863 | * Supported values: |
| 7864 | * - #ASM_PARAM_SVC_RAMPINGCURVE_LINEAR |
| 7865 | * - #ASM_PARAM_SVC_RAMPINGCURVE_EXP |
| 7866 | * - #ASM_PARAM_SVC_RAMPINGCURVE_LOG |
| 7867 | */ |
| 7868 | } __packed; |
| 7869 | |
| 7870 | |
| 7871 | /* Structure for holding soft pause parameters. */ |
| 7872 | |
| 7873 | |
| 7874 | /* Payload of the #ASM_PARAM_ID_SOFT_PAUSE_PARAMETERS |
| 7875 | * parameters used by the Volume Control module. |
| 7876 | */ |
| 7877 | |
| 7878 | |
| 7879 | struct asm_soft_pause_params { |
| 7880 | struct apr_hdr hdr; |
| 7881 | struct asm_stream_cmd_set_pp_params_v2 param; |
| 7882 | struct asm_stream_param_data_v2 data; |
| 7883 | uint32_t enable_flag; |
| 7884 | /*< Specifies whether soft pause is disabled (0) or enabled |
| 7885 | * (nonzero). |
| 7886 | */ |
| 7887 | |
| 7888 | |
| 7889 | |
| 7890 | uint32_t period; |
| 7891 | /*< Period in milliseconds. |
| 7892 | * Supported values: 0 to 15000 |
| 7893 | */ |
| 7894 | |
| 7895 | uint32_t step; |
| 7896 | /*< Step in microseconds. |
| 7897 | * Supported values: 0 to 15000000 |
| 7898 | */ |
| 7899 | |
| 7900 | uint32_t ramping_curve; |
| 7901 | /*< Ramping curve. |
| 7902 | * Supported values: |
| 7903 | * - #ASM_PARAM_SVC_RAMPINGCURVE_LINEAR |
| 7904 | * - #ASM_PARAM_SVC_RAMPINGCURVE_EXP |
| 7905 | * - #ASM_PARAM_SVC_RAMPINGCURVE_LOG |
| 7906 | */ |
| 7907 | } __packed; |
| 7908 | |
| 7909 | |
| 7910 | /* Maximum number of channels.*/ |
| 7911 | #define VOLUME_CONTROL_MAX_CHANNELS 8 |
| 7912 | |
| 7913 | /* Structure for holding one channel type - gain pair. */ |
| 7914 | |
| 7915 | |
| 7916 | /* Payload of the #ASM_PARAM_ID_MULTICHANNEL_GAIN channel |
| 7917 | * type/gain pairs used by the Volume Control module. \n \n This |
| 7918 | * structure immediately follows the |
| 7919 | * asm_volume_ctrl_multichannel_gain structure. |
| 7920 | */ |
| 7921 | |
| 7922 | |
| 7923 | struct asm_volume_ctrl_channeltype_gain_pair { |
| 7924 | uint8_t channeltype; |
| 7925 | /* |
| 7926 | * Channel type for which the gain setting is to be applied. |
| 7927 | * Supported values: |
| 7928 | * - #PCM_CHANNEL_L |
| 7929 | * - #PCM_CHANNEL_R |
| 7930 | * - #PCM_CHANNEL_C |
| 7931 | * - #PCM_CHANNEL_LS |
| 7932 | * - #PCM_CHANNEL_RS |
| 7933 | * - #PCM_CHANNEL_LFE |
| 7934 | * - #PCM_CHANNEL_CS |
| 7935 | * - #PCM_CHANNEL_LB |
| 7936 | * - #PCM_CHANNEL_RB |
| 7937 | * - #PCM_CHANNELS |
| 7938 | * - #PCM_CHANNEL_CVH |
| 7939 | * - #PCM_CHANNEL_MS |
| 7940 | * - #PCM_CHANNEL_FLC |
| 7941 | * - #PCM_CHANNEL_FRC |
| 7942 | * - #PCM_CHANNEL_RLC |
| 7943 | * - #PCM_CHANNEL_RRC |
| 7944 | */ |
| 7945 | |
| 7946 | uint8_t reserved1; |
| 7947 | /* Clients must set this field to zero. */ |
| 7948 | |
| 7949 | uint8_t reserved2; |
| 7950 | /* Clients must set this field to zero. */ |
| 7951 | |
| 7952 | uint8_t reserved3; |
| 7953 | /* Clients must set this field to zero. */ |
| 7954 | |
| 7955 | uint32_t gain; |
| 7956 | /* |
| 7957 | * Gain value for this channel in Q28 format. |
| 7958 | * Supported values: Any |
| 7959 | */ |
| 7960 | } __packed; |
| 7961 | |
| 7962 | |
| 7963 | /* Structure for the multichannel gain command */ |
| 7964 | |
| 7965 | |
| 7966 | /* Payload of the #ASM_PARAM_ID_MULTICHANNEL_GAIN |
| 7967 | * parameters used by the Volume Control module. |
| 7968 | */ |
| 7969 | |
| 7970 | |
| 7971 | struct asm_volume_ctrl_multichannel_gain { |
| 7972 | struct apr_hdr hdr; |
| 7973 | struct asm_stream_cmd_set_pp_params_v2 param; |
| 7974 | struct asm_stream_param_data_v2 data; |
| 7975 | uint32_t num_channels; |
| 7976 | /* |
| 7977 | * Number of channels for which gain values are provided. Any |
| 7978 | * channels present in the data for which gain is not provided are |
| 7979 | * set to unity gain. |
| 7980 | * Supported values: 1 to 8 |
| 7981 | */ |
| 7982 | |
| 7983 | struct asm_volume_ctrl_channeltype_gain_pair |
| 7984 | gain_data[VOLUME_CONTROL_MAX_CHANNELS]; |
| 7985 | /* Array of channel type/gain pairs.*/ |
| 7986 | } __packed; |
| 7987 | |
| 7988 | |
| 7989 | /* Structure for holding one channel type - mute pair. */ |
| 7990 | |
| 7991 | |
| 7992 | /* Payload of the #ASM_PARAM_ID_MULTICHANNEL_MUTE channel |
| 7993 | * type/mute setting pairs used by the Volume Control module. \n \n |
| 7994 | * This structure immediately follows the |
| 7995 | * asm_volume_ctrl_multichannel_mute structure. |
| 7996 | */ |
| 7997 | |
| 7998 | |
| 7999 | struct asm_volume_ctrl_channelype_mute_pair { |
| 8000 | struct apr_hdr hdr; |
| 8001 | struct asm_stream_cmd_set_pp_params_v2 param; |
| 8002 | struct asm_stream_param_data_v2 data; |
| 8003 | uint8_t channelype; |
| 8004 | /*< Channel type for which the mute setting is to be applied. |
| 8005 | * Supported values: |
| 8006 | * - #PCM_CHANNEL_L |
| 8007 | * - #PCM_CHANNEL_R |
| 8008 | * - #PCM_CHANNEL_C |
| 8009 | * - #PCM_CHANNEL_LS |
| 8010 | * - #PCM_CHANNEL_RS |
| 8011 | * - #PCM_CHANNEL_LFE |
| 8012 | * - #PCM_CHANNEL_CS |
| 8013 | * - #PCM_CHANNEL_LB |
| 8014 | * - #PCM_CHANNEL_RB |
| 8015 | * - #PCM_CHANNELS |
| 8016 | * - #PCM_CHANNEL_CVH |
| 8017 | * - #PCM_CHANNEL_MS |
| 8018 | * - #PCM_CHANNEL_FLC |
| 8019 | * - #PCM_CHANNEL_FRC |
| 8020 | * - #PCM_CHANNEL_RLC |
| 8021 | * - #PCM_CHANNEL_RRC |
| 8022 | */ |
| 8023 | |
| 8024 | uint8_t reserved1; |
| 8025 | /*< Clients must set this field to zero. */ |
| 8026 | |
| 8027 | uint8_t reserved2; |
| 8028 | /*< Clients must set this field to zero. */ |
| 8029 | |
| 8030 | uint8_t reserved3; |
| 8031 | /*< Clients must set this field to zero. */ |
| 8032 | |
| 8033 | uint32_t mute; |
| 8034 | /*< Mute setting for this channel. |
| 8035 | * Supported values: |
| 8036 | * - 0 = Unmute |
| 8037 | * - Nonzero = Mute |
| 8038 | */ |
| 8039 | } __packed; |
| 8040 | |
| 8041 | |
| 8042 | /* Structure for the multichannel mute command */ |
| 8043 | |
| 8044 | |
| 8045 | /* @brief Payload of the #ASM_PARAM_ID_MULTICHANNEL_MUTE |
| 8046 | * parameters used by the Volume Control module. |
| 8047 | */ |
| 8048 | |
| 8049 | |
| 8050 | struct asm_volume_ctrl_multichannel_mute { |
| 8051 | struct apr_hdr hdr; |
| 8052 | struct asm_stream_cmd_set_pp_params_v2 param; |
| 8053 | struct asm_stream_param_data_v2 data; |
| 8054 | uint32_t num_channels; |
| 8055 | /*< Number of channels for which mute configuration is |
| 8056 | * provided. Any channels present in the data for which mute |
| 8057 | * configuration is not provided are set to unmute. |
| 8058 | * Supported values: 1 to 8 |
| 8059 | */ |
| 8060 | |
| 8061 | struct asm_volume_ctrl_channelype_mute_pair |
| 8062 | mute_data[VOLUME_CONTROL_MAX_CHANNELS]; |
| 8063 | /*< Array of channel type/mute setting pairs.*/ |
| 8064 | } __packed; |
| 8065 | /* end_addtogroup audio_pp_param_ids */ |
| 8066 | |
| 8067 | /* audio_pp_module_ids |
| 8068 | * ID of the IIR Tuning Filter module. |
| 8069 | * This module supports the following parameter IDs: |
| 8070 | * - #ASM_PARAM_ID_IIRUNING_FILTER_ENABLE_CONFIG |
| 8071 | * - #ASM_PARAM_ID_IIRUNING_FILTER_PRE_GAIN |
| 8072 | * - #ASM_PARAM_ID_IIRUNING_FILTER_CONFIG_PARAMS |
| 8073 | */ |
| 8074 | #define ASM_MODULE_ID_IIRUNING_FILTER 0x00010C02 |
| 8075 | |
| 8076 | /* @addtogroup audio_pp_param_ids */ |
| 8077 | /* ID of the IIR tuning filter enable parameter used by the |
| 8078 | * #ASM_MODULE_ID_IIRUNING_FILTER module. |
| 8079 | * @messagepayload |
| 8080 | * @structure{asm_iiruning_filter_enable} |
| 8081 | * @tablespace |
| 8082 | * @inputtable{Audio_Postproc_ASM_PARAM_ID_IIRUNING_FILTER_ENABLE_CO |
| 8083 | * NFIG.tex} |
| 8084 | */ |
| 8085 | #define ASM_PARAM_ID_IIRUNING_FILTER_ENABLE_CONFIG 0x00010C03 |
| 8086 | |
| 8087 | /* ID of the IIR tuning filter pregain parameter used by the |
| 8088 | * #ASM_MODULE_ID_IIRUNING_FILTER module. |
| 8089 | */ |
| 8090 | #define ASM_PARAM_ID_IIRUNING_FILTER_PRE_GAIN 0x00010C04 |
| 8091 | |
| 8092 | /* ID of the IIR tuning filter configuration parameters used by the |
| 8093 | * #ASM_MODULE_ID_IIRUNING_FILTER module. |
| 8094 | */ |
| 8095 | #define ASM_PARAM_ID_IIRUNING_FILTER_CONFIG_PARAMS 0x00010C05 |
| 8096 | |
| 8097 | /* Structure for an enable configuration parameter for an |
| 8098 | * IIR tuning filter module. |
| 8099 | */ |
| 8100 | |
| 8101 | |
| 8102 | /* @brief Payload of the #ASM_PARAM_ID_IIRUNING_FILTER_ENABLE_CONFIG |
| 8103 | * parameter used by the IIR Tuning Filter module. |
| 8104 | */ |
| 8105 | struct asm_iiruning_filter_enable { |
| 8106 | uint32_t enable_flag; |
| 8107 | /*< Specifies whether the IIR tuning filter is disabled (0) or |
| 8108 | * enabled (1). |
| 8109 | */ |
| 8110 | } __packed; |
| 8111 | |
| 8112 | /* Structure for the pregain parameter for an IIR tuning filter module. */ |
| 8113 | |
| 8114 | |
| 8115 | /* Payload of the #ASM_PARAM_ID_IIRUNING_FILTER_PRE_GAIN |
| 8116 | * parameters used by the IIR Tuning Filter module. |
| 8117 | */ |
| 8118 | struct asm_iiruning_filter_pregain { |
| 8119 | uint16_t pregain; |
| 8120 | /*< Linear gain in Q13 format. */ |
| 8121 | |
| 8122 | uint16_t reserved; |
| 8123 | /*< Clients must set this field to zero.*/ |
| 8124 | } __packed; |
| 8125 | |
| 8126 | /* Structure for the configuration parameter for an IIR tuning filter |
| 8127 | * module. |
| 8128 | */ |
| 8129 | |
| 8130 | |
| 8131 | /* @brief Payload of the #ASM_PARAM_ID_IIRUNING_FILTER_CONFIG_PARAMS |
| 8132 | * parameters used by the IIR Tuning Filter module. \n |
| 8133 | * \n |
| 8134 | * This structure is followed by the IIR filter coefficients: \n |
| 8135 | * - Sequence of int32_t FilterCoeffs \n |
| 8136 | * Five coefficients for each band. Each coefficient is in int32_t format, in |
| 8137 | * the order of b0, b1, b2, a1, a2. |
| 8138 | * - Sequence of int16_t NumShiftFactor \n |
| 8139 | * One int16_t per band. The numerator shift factor is related to the Q |
| 8140 | * factor of the filter coefficients. |
| 8141 | * - Sequence of uint16_t PanSetting \n |
| 8142 | * One uint16_t per band, indicating if the filter is applied to left (0), |
| 8143 | * right (1), or both (2) channels. |
| 8144 | */ |
| 8145 | struct asm_iir_filter_config_params { |
| 8146 | uint16_t num_biquad_stages; |
| 8147 | /*< Number of bands. |
| 8148 | * Supported values: 0 to 20 |
| 8149 | */ |
| 8150 | |
| 8151 | uint16_t reserved; |
| 8152 | /*< Clients must set this field to zero.*/ |
| 8153 | } __packed; |
| 8154 | |
| 8155 | /* audio_pp_module_ids |
| 8156 | * ID of the Multiband Dynamic Range Control (MBDRC) module on the Tx/Rx |
| 8157 | * paths. |
| 8158 | * This module supports the following parameter IDs: |
| 8159 | * - #ASM_PARAM_ID_MBDRC_ENABLE |
| 8160 | * - #ASM_PARAM_ID_MBDRC_CONFIG_PARAMS |
| 8161 | */ |
| 8162 | #define ASM_MODULE_ID_MBDRC 0x00010C06 |
| 8163 | |
| 8164 | /* audio_pp_param_ids */ |
| 8165 | /* ID of the MBDRC enable parameter used by the #ASM_MODULE_ID_MBDRC module. |
| 8166 | * @messagepayload |
| 8167 | * @structure{asm_mbdrc_enable} |
| 8168 | * @tablespace |
| 8169 | * @inputtable{Audio_Postproc_ASM_PARAM_ID_MBDRC_ENABLE.tex} |
| 8170 | */ |
| 8171 | #define ASM_PARAM_ID_MBDRC_ENABLE 0x00010C07 |
| 8172 | |
| 8173 | /* ID of the MBDRC configuration parameters used by the |
| 8174 | * #ASM_MODULE_ID_MBDRC module. |
| 8175 | * @messagepayload |
| 8176 | * @structure{asm_mbdrc_config_params} |
| 8177 | * @tablespace |
| 8178 | * @inputtable{Audio_Postproc_ASM_PARAM_ID_MBDRC_CONFIG_PARAMS.tex} |
| 8179 | * |
| 8180 | * @parspace Sub-band DRC configuration parameters |
| 8181 | * @structure{asm_subband_drc_config_params} |
| 8182 | * @tablespace |
| 8183 | * @inputtable{Audio_Postproc_ASM_PARAM_ID_MBDRC_CONFIG_PARAMS_subband_DRC.tex} |
| 8184 | * |
| 8185 | * @keep{6} |
| 8186 | * To obtain legacy ADRC from MBDRC, use the calibration tool to: |
| 8187 | * |
| 8188 | * - Enable MBDRC (EnableFlag = TRUE) |
| 8189 | * - Set number of bands to 1 (uiNumBands = 1) |
| 8190 | * - Enable the first MBDRC band (DrcMode[0] = DRC_ENABLED = 1) |
| 8191 | * - Clear the first band mute flag (MuteFlag[0] = 0) |
| 8192 | * - Set the first band makeup gain to unity (compMakeUpGain[0] = 0x2000) |
| 8193 | * - Use the legacy ADRC parameters to calibrate the rest of the MBDRC |
| 8194 | * parameters. |
| 8195 | */ |
| 8196 | #define ASM_PARAM_ID_MBDRC_CONFIG_PARAMS 0x00010C08 |
| 8197 | |
| 8198 | /* end_addtogroup audio_pp_param_ids */ |
| 8199 | |
| 8200 | /* audio_pp_module_ids |
| 8201 | * ID of the MMBDRC module version 2 pre/postprocessing block. |
| 8202 | * This module differs from the original MBDRC (#ASM_MODULE_ID_MBDRC) in |
| 8203 | * the length of the filters used in each sub-band. |
| 8204 | * This module supports the following parameter ID: |
| 8205 | * - #ASM_PARAM_ID_MBDRC_CONFIG_PARAMS_IMPROVED_FILTBANK_V2 |
| 8206 | */ |
| 8207 | #define ASM_MODULE_ID_MBDRCV2 0x0001070B |
| 8208 | |
| 8209 | /* @addtogroup audio_pp_param_ids */ |
| 8210 | /* ID of the configuration parameters used by the |
| 8211 | * #ASM_MODULE_ID_MBDRCV2 module for the improved filter structure |
| 8212 | * of the MBDRC v2 pre/postprocessing block. |
| 8213 | * The update to this configuration structure from the original |
| 8214 | * MBDRC is the number of filter coefficients in the filter |
| 8215 | * structure. The sequence for is as follows: |
| 8216 | * - 1 band = 0 FIR coefficient + 1 mute flag + uint16_t padding |
| 8217 | * - 2 bands = 141 FIR coefficients + 2 mute flags + uint16_t padding |
| 8218 | * - 3 bands = 141+81 FIR coefficients + 3 mute flags + uint16_t padding |
| 8219 | * - 4 bands = 141+81+61 FIR coefficients + 4 mute flags + uint16_t |
| 8220 | * padding |
| 8221 | * - 5 bands = 141+81+61+61 FIR coefficients + 5 mute flags + |
| 8222 | * uint16_t padding |
| 8223 | * This block uses the same parameter structure as |
| 8224 | * #ASM_PARAM_ID_MBDRC_CONFIG_PARAMS. |
| 8225 | */ |
| 8226 | #define ASM_PARAM_ID_MBDRC_CONFIG_PARAMS_IMPROVED_FILTBANK_V2 \ |
| 8227 | 0x0001070C |
| 8228 | |
| 8229 | #define ASM_MODULE_ID_MBDRCV3 0x0001090B |
| 8230 | /* |
| 8231 | * ID of the MMBDRC module version 3 pre/postprocessing block. |
| 8232 | * This module differs from MBDRCv2 (#ASM_MODULE_ID_MBDRCV2) in |
| 8233 | * that it supports both 16- and 24-bit data. |
| 8234 | * This module supports the following parameter ID: |
| 8235 | * - #ASM_PARAM_ID_MBDRC_ENABLE |
| 8236 | * - #ASM_PARAM_ID_MBDRC_CONFIG_PARAMS |
| 8237 | * - #ASM_PARAM_ID_MBDRC_CONFIG_PARAMS_V3 |
| 8238 | * - #ASM_PARAM_ID_MBDRC_FILTER_XOVER_FREQS |
| 8239 | */ |
| 8240 | |
| 8241 | /* Structure for the enable parameter for an MBDRC module. */ |
| 8242 | |
| 8243 | |
| 8244 | /* Payload of the #ASM_PARAM_ID_MBDRC_ENABLE parameter used by the |
| 8245 | * MBDRC module. |
| 8246 | */ |
| 8247 | struct asm_mbdrc_enable { |
| 8248 | uint32_t enable_flag; |
| 8249 | /*< Specifies whether MBDRC is disabled (0) or enabled (nonzero).*/ |
| 8250 | } __packed; |
| 8251 | |
| 8252 | /* Structure for the configuration parameters for an MBDRC module. */ |
| 8253 | |
| 8254 | |
| 8255 | /* Payload of the #ASM_PARAM_ID_MBDRC_CONFIG_PARAMS |
| 8256 | * parameters used by the MBDRC module. \n \n Following this |
| 8257 | * structure is the payload for sub-band DRC configuration |
| 8258 | * parameters (asm_subband_drc_config_params). This sub-band |
| 8259 | * structure must be repeated for each band. |
| 8260 | */ |
| 8261 | |
| 8262 | |
| 8263 | struct asm_mbdrc_config_params { |
| 8264 | uint16_t num_bands; |
| 8265 | /*< Number of bands. |
| 8266 | * Supported values: 1 to 5 |
| 8267 | */ |
| 8268 | |
| 8269 | int16_t limiterhreshold; |
| 8270 | /*< Threshold in decibels for the limiter output. |
| 8271 | * Supported values: -72 to 18 \n |
| 8272 | * Recommended value: 3994 (-0.22 db in Q3.12 format) |
| 8273 | */ |
| 8274 | |
| 8275 | int16_t limiter_makeup_gain; |
| 8276 | /*< Makeup gain in decibels for the limiter output. |
| 8277 | * Supported values: -42 to 42 \n |
| 8278 | * Recommended value: 256 (0 dB in Q7.8 format) |
| 8279 | */ |
| 8280 | |
| 8281 | int16_t limiter_gc; |
| 8282 | /*< Limiter gain recovery coefficient. |
| 8283 | * Supported values: 0.5 to 0.99 \n |
| 8284 | * Recommended value: 32440 (0.99 in Q15 format) |
| 8285 | */ |
| 8286 | |
| 8287 | int16_t limiter_delay; |
| 8288 | /*< Limiter delay in samples. |
| 8289 | * Supported values: 0 to 10 \n |
| 8290 | * Recommended value: 262 (0.008 samples in Q15 format) |
| 8291 | */ |
| 8292 | |
| 8293 | int16_t limiter_max_wait; |
| 8294 | /*< Maximum limiter waiting time in samples. |
| 8295 | * Supported values: 0 to 10 \n |
| 8296 | * Recommended value: 262 (0.008 samples in Q15 format) |
| 8297 | */ |
| 8298 | } __packed; |
| 8299 | |
| 8300 | /* DRC configuration structure for each sub-band of an MBDRC module. */ |
| 8301 | |
| 8302 | |
| 8303 | /* Payload of the #ASM_PARAM_ID_MBDRC_CONFIG_PARAMS DRC |
| 8304 | * configuration parameters for each sub-band in the MBDRC module. |
| 8305 | * After this DRC structure is configured for valid bands, the next |
| 8306 | * MBDRC setparams expects the sequence of sub-band MBDRC filter |
| 8307 | * coefficients (the length depends on the number of bands) plus the |
| 8308 | * mute flag for that band plus uint16_t padding. |
| 8309 | * |
| 8310 | * @keep{10} |
| 8311 | * The filter coefficient and mute flag are of type int16_t: |
| 8312 | * - FIR coefficient = int16_t firFilter |
| 8313 | * - Mute flag = int16_t fMuteFlag |
| 8314 | * |
| 8315 | * The sequence is as follows: |
| 8316 | * - 1 band = 0 FIR coefficient + 1 mute flag + uint16_t padding |
| 8317 | * - 2 bands = 97 FIR coefficients + 2 mute flags + uint16_t padding |
| 8318 | * - 3 bands = 97+33 FIR coefficients + 3 mute flags + uint16_t padding |
| 8319 | * - 4 bands = 97+33+33 FIR coefficients + 4 mute flags + uint16_t padding |
| 8320 | * - 5 bands = 97+33+33+33 FIR coefficients + 5 mute flags + uint16_t padding |
| 8321 | * |
| 8322 | * For improved filterbank, the sequence is as follows: |
| 8323 | * - 1 band = 0 FIR coefficient + 1 mute flag + uint16_t padding |
| 8324 | * - 2 bands = 141 FIR coefficients + 2 mute flags + uint16_t padding |
| 8325 | * - 3 bands = 141+81 FIR coefficients + 3 mute flags + uint16_t padding |
| 8326 | * - 4 bands = 141+81+61 FIR coefficients + 4 mute flags + uint16_t padding |
| 8327 | * - 5 bands = 141+81+61+61 FIR coefficients + 5 mute flags + uint16_t padding |
| 8328 | */ |
| 8329 | struct asm_subband_drc_config_params { |
| 8330 | int16_t drc_stereo_linked_flag; |
| 8331 | /*< Specifies whether all stereo channels have the same applied |
| 8332 | * dynamics (1) or if they process their dynamics independently (0). |
| 8333 | * Supported values: |
| 8334 | * - 0 -- Not linked |
| 8335 | * - 1 -- Linked |
| 8336 | */ |
| 8337 | |
| 8338 | int16_t drc_mode; |
| 8339 | /*< Specifies whether DRC mode is bypassed for sub-bands. |
| 8340 | * Supported values: |
| 8341 | * - 0 -- Disabled |
| 8342 | * - 1 -- Enabled |
| 8343 | */ |
| 8344 | |
| 8345 | int16_t drc_down_sample_level; |
| 8346 | /*< DRC down sample level. |
| 8347 | * Supported values: @ge 1 |
| 8348 | */ |
| 8349 | |
| 8350 | int16_t drc_delay; |
| 8351 | /*< DRC delay in samples. |
| 8352 | * Supported values: 0 to 1200 |
| 8353 | */ |
| 8354 | |
| 8355 | uint16_t drc_rmsime_avg_const; |
| 8356 | /*< RMS signal energy time-averaging constant. |
| 8357 | * Supported values: 0 to 2^16-1 |
| 8358 | */ |
| 8359 | |
| 8360 | uint16_t drc_makeup_gain; |
| 8361 | /*< DRC makeup gain in decibels. |
| 8362 | * Supported values: 258 to 64917 |
| 8363 | */ |
| 8364 | /* Down expander settings */ |
| 8365 | int16_t down_expdrhreshold; |
| 8366 | /*< Down expander threshold. |
| 8367 | * Supported Q7 format values: 1320 to up_cmpsrhreshold |
| 8368 | */ |
| 8369 | |
| 8370 | int16_t down_expdr_slope; |
| 8371 | /*< Down expander slope. |
| 8372 | * Supported Q8 format values: -32768 to 0. |
| 8373 | */ |
| 8374 | |
| 8375 | uint32_t down_expdr_attack; |
| 8376 | /*< Down expander attack constant. |
| 8377 | * Supported Q31 format values: 196844 to 2^31. |
| 8378 | */ |
| 8379 | |
| 8380 | uint32_t down_expdr_release; |
| 8381 | /*< Down expander release constant. |
| 8382 | * Supported Q31 format values: 19685 to 2^31 |
| 8383 | */ |
| 8384 | |
| 8385 | uint16_t down_expdr_hysteresis; |
| 8386 | /*< Down expander hysteresis constant. |
| 8387 | * Supported Q14 format values: 1 to 32690 |
| 8388 | */ |
| 8389 | |
| 8390 | uint16_t reserved; |
| 8391 | /*< Clients must set this field to zero. */ |
| 8392 | |
| 8393 | int32_t down_expdr_min_gain_db; |
| 8394 | /*< Down expander minimum gain. |
| 8395 | * Supported Q23 format values: -805306368 to 0. |
| 8396 | */ |
| 8397 | |
| 8398 | /* Up compressor settings */ |
| 8399 | |
| 8400 | int16_t up_cmpsrhreshold; |
| 8401 | /*< Up compressor threshold. |
| 8402 | * Supported Q7 format values: down_expdrhreshold to |
| 8403 | * down_cmpsrhreshold. |
| 8404 | */ |
| 8405 | |
| 8406 | uint16_t up_cmpsr_slope; |
| 8407 | /*< Up compressor slope. |
| 8408 | * Supported Q16 format values: 0 to 64881. |
| 8409 | */ |
| 8410 | |
| 8411 | uint32_t up_cmpsr_attack; |
| 8412 | /*< Up compressor attack constant. |
| 8413 | * Supported Q31 format values: 196844 to 2^31. |
| 8414 | */ |
| 8415 | |
| 8416 | uint32_t up_cmpsr_release; |
| 8417 | /*< Up compressor release constant. |
| 8418 | * Supported Q31 format values: 19685 to 2^31. |
| 8419 | */ |
| 8420 | |
| 8421 | uint16_t up_cmpsr_hysteresis; |
| 8422 | /*< Up compressor hysteresis constant. |
| 8423 | * Supported Q14 format values: 1 to 32690. |
| 8424 | */ |
| 8425 | |
| 8426 | /* Down compressor settings */ |
| 8427 | |
| 8428 | int16_t down_cmpsrhreshold; |
| 8429 | /*< Down compressor threshold. |
| 8430 | * Supported Q7 format values: up_cmpsrhreshold to 11560. |
| 8431 | */ |
| 8432 | |
| 8433 | uint16_t down_cmpsr_slope; |
| 8434 | /*< Down compressor slope. |
| 8435 | * Supported Q16 format values: 0 to 64881. |
| 8436 | */ |
| 8437 | |
| 8438 | uint16_t reserved1; |
| 8439 | /*< Clients must set this field to zero. */ |
| 8440 | |
| 8441 | uint32_t down_cmpsr_attack; |
| 8442 | /*< Down compressor attack constant. |
| 8443 | * Supported Q31 format values: 196844 to 2^31. |
| 8444 | */ |
| 8445 | |
| 8446 | uint32_t down_cmpsr_release; |
| 8447 | /*< Down compressor release constant. |
| 8448 | * Supported Q31 format values: 19685 to 2^31. |
| 8449 | */ |
| 8450 | |
| 8451 | uint16_t down_cmpsr_hysteresis; |
| 8452 | /*< Down compressor hysteresis constant. |
| 8453 | * Supported Q14 values: 1 to 32690. |
| 8454 | */ |
| 8455 | |
| 8456 | uint16_t reserved2; |
| 8457 | /*< Clients must set this field to zero.*/ |
| 8458 | } __packed; |
| 8459 | |
| 8460 | #define ASM_MODULE_ID_EQUALIZER 0x00010C27 |
| 8461 | #define ASM_PARAM_ID_EQUALIZER_PARAMETERS 0x00010C28 |
| 8462 | |
| 8463 | #define ASM_MAX_EQ_BANDS 12 |
| 8464 | |
| 8465 | struct asm_eq_per_band_params { |
| 8466 | uint32_t band_idx; |
| 8467 | /*< Band index. |
| 8468 | * Supported values: 0 to 11 |
| 8469 | */ |
| 8470 | |
| 8471 | uint32_t filterype; |
| 8472 | /*< Type of filter. |
| 8473 | * Supported values: |
| 8474 | * - #ASM_PARAM_EQYPE_NONE |
| 8475 | * - #ASM_PARAM_EQ_BASS_BOOST |
| 8476 | * - #ASM_PARAM_EQ_BASS_CUT |
| 8477 | * - #ASM_PARAM_EQREBLE_BOOST |
| 8478 | * - #ASM_PARAM_EQREBLE_CUT |
| 8479 | * - #ASM_PARAM_EQ_BAND_BOOST |
| 8480 | * - #ASM_PARAM_EQ_BAND_CUT |
| 8481 | */ |
| 8482 | |
| 8483 | uint32_t center_freq_hz; |
| 8484 | /*< Filter band center frequency in Hertz. */ |
| 8485 | |
| 8486 | int32_t filter_gain; |
| 8487 | /*< Filter band initial gain. |
| 8488 | * Supported values: +12 to -12 dB in 1 dB increments |
| 8489 | */ |
| 8490 | |
| 8491 | int32_t q_factor; |
| 8492 | /*< Filter band quality factor expressed as a Q8 number, i.e., a |
| 8493 | * fixed-point number with q factor of 8. For example, 3000/(2^8). |
| 8494 | */ |
| 8495 | } __packed; |
| 8496 | |
| 8497 | struct asm_eq_params { |
| 8498 | struct apr_hdr hdr; |
| 8499 | struct asm_stream_cmd_set_pp_params_v2 param; |
| 8500 | struct asm_stream_param_data_v2 data; |
| 8501 | uint32_t enable_flag; |
| 8502 | /*< Specifies whether the equalizer module is disabled (0) or enabled |
| 8503 | * (nonzero). |
| 8504 | */ |
| 8505 | |
| 8506 | uint32_t num_bands; |
| 8507 | /*< Number of bands. |
| 8508 | * Supported values: 1 to 12 |
| 8509 | */ |
| 8510 | struct asm_eq_per_band_params eq_bands[ASM_MAX_EQ_BANDS]; |
| 8511 | |
| 8512 | } __packed; |
| 8513 | |
| 8514 | /* No equalizer effect.*/ |
| 8515 | #define ASM_PARAM_EQYPE_NONE 0 |
| 8516 | |
| 8517 | /* Bass boost equalizer effect.*/ |
| 8518 | #define ASM_PARAM_EQ_BASS_BOOST 1 |
| 8519 | |
| 8520 | /*Bass cut equalizer effect.*/ |
| 8521 | #define ASM_PARAM_EQ_BASS_CUT 2 |
| 8522 | |
| 8523 | /* Treble boost equalizer effect */ |
| 8524 | #define ASM_PARAM_EQREBLE_BOOST 3 |
| 8525 | |
| 8526 | /* Treble cut equalizer effect.*/ |
| 8527 | #define ASM_PARAM_EQREBLE_CUT 4 |
| 8528 | |
| 8529 | /* Band boost equalizer effect.*/ |
| 8530 | #define ASM_PARAM_EQ_BAND_BOOST 5 |
| 8531 | |
| 8532 | /* Band cut equalizer effect.*/ |
| 8533 | #define ASM_PARAM_EQ_BAND_CUT 6 |
| 8534 | |
| 8535 | /* Get & set params */ |
| 8536 | #define VSS_ICOMMON_CMD_SET_PARAM_V2 0x0001133D |
| 8537 | #define VSS_ICOMMON_CMD_GET_PARAM_V2 0x0001133E |
| 8538 | #define VSS_ICOMMON_RSP_GET_PARAM 0x00011008 |
| 8539 | |
Laxminath Kasam | 38070be | 2017-08-17 18:21:59 +0530 | [diff] [blame] | 8540 | #define VSS_MAX_AVCS_NUM_SERVICES 25 |
| 8541 | |
Asish Bhattacharya | 8e2277f | 2017-07-20 18:31:55 +0530 | [diff] [blame] | 8542 | /* ID of the Bass Boost module. |
| 8543 | * This module supports the following parameter IDs: |
| 8544 | * - #AUDPROC_PARAM_ID_BASS_BOOST_ENABLE |
| 8545 | * - #AUDPROC_PARAM_ID_BASS_BOOST_MODE |
| 8546 | * - #AUDPROC_PARAM_ID_BASS_BOOST_STRENGTH |
| 8547 | */ |
| 8548 | #define AUDPROC_MODULE_ID_BASS_BOOST 0x000108A1 |
| 8549 | /* ID of the Bass Boost enable parameter used by |
| 8550 | * AUDPROC_MODULE_ID_BASS_BOOST. |
| 8551 | */ |
| 8552 | #define AUDPROC_PARAM_ID_BASS_BOOST_ENABLE 0x000108A2 |
| 8553 | /* ID of the Bass Boost mode parameter used by |
| 8554 | * AUDPROC_MODULE_ID_BASS_BOOST. |
| 8555 | */ |
| 8556 | #define AUDPROC_PARAM_ID_BASS_BOOST_MODE 0x000108A3 |
| 8557 | /* ID of the Bass Boost strength parameter used by |
| 8558 | * AUDPROC_MODULE_ID_BASS_BOOST. |
| 8559 | */ |
| 8560 | #define AUDPROC_PARAM_ID_BASS_BOOST_STRENGTH 0x000108A4 |
| 8561 | |
| 8562 | /* ID of the PBE module. |
| 8563 | * This module supports the following parameter IDs: |
| 8564 | * - #AUDPROC_PARAM_ID_PBE_ENABLE |
| 8565 | * - #AUDPROC_PARAM_ID_PBE_PARAM_CONFIG |
| 8566 | */ |
| 8567 | #define AUDPROC_MODULE_ID_PBE 0x00010C2A |
| 8568 | /* ID of the Bass Boost enable parameter used by |
| 8569 | * AUDPROC_MODULE_ID_BASS_BOOST. |
| 8570 | */ |
| 8571 | #define AUDPROC_PARAM_ID_PBE_ENABLE 0x00010C2B |
| 8572 | /* ID of the Bass Boost mode parameter used by |
| 8573 | * AUDPROC_MODULE_ID_BASS_BOOST. |
| 8574 | */ |
| 8575 | #define AUDPROC_PARAM_ID_PBE_PARAM_CONFIG 0x00010C49 |
| 8576 | |
| 8577 | /* ID of the Virtualizer module. This module supports the |
| 8578 | * following parameter IDs: |
| 8579 | * - #AUDPROC_PARAM_ID_VIRTUALIZER_ENABLE |
| 8580 | * - #AUDPROC_PARAM_ID_VIRTUALIZER_STRENGTH |
| 8581 | * - #AUDPROC_PARAM_ID_VIRTUALIZER_OUT_TYPE |
| 8582 | * - #AUDPROC_PARAM_ID_VIRTUALIZER_GAIN_ADJUST |
| 8583 | */ |
| 8584 | #define AUDPROC_MODULE_ID_VIRTUALIZER 0x000108A5 |
| 8585 | /* ID of the Virtualizer enable parameter used by |
| 8586 | * AUDPROC_MODULE_ID_VIRTUALIZER. |
| 8587 | */ |
| 8588 | #define AUDPROC_PARAM_ID_VIRTUALIZER_ENABLE 0x000108A6 |
| 8589 | /* ID of the Virtualizer strength parameter used by |
| 8590 | * AUDPROC_MODULE_ID_VIRTUALIZER. |
| 8591 | */ |
| 8592 | #define AUDPROC_PARAM_ID_VIRTUALIZER_STRENGTH 0x000108A7 |
| 8593 | /* ID of the Virtualizer out type parameter used by |
| 8594 | * AUDPROC_MODULE_ID_VIRTUALIZER. |
| 8595 | */ |
| 8596 | #define AUDPROC_PARAM_ID_VIRTUALIZER_OUT_TYPE 0x000108A8 |
| 8597 | /* ID of the Virtualizer out type parameter used by |
| 8598 | * AUDPROC_MODULE_ID_VIRTUALIZER. |
| 8599 | */ |
| 8600 | #define AUDPROC_PARAM_ID_VIRTUALIZER_GAIN_ADJUST 0x000108A9 |
| 8601 | |
| 8602 | /* ID of the Reverb module. This module supports the following |
| 8603 | * parameter IDs: |
| 8604 | * - #AUDPROC_PARAM_ID_REVERB_ENABLE |
| 8605 | * - #AUDPROC_PARAM_ID_REVERB_MODE |
| 8606 | * - #AUDPROC_PARAM_ID_REVERB_PRESET |
| 8607 | * - #AUDPROC_PARAM_ID_REVERB_WET_MIX |
| 8608 | * - #AUDPROC_PARAM_ID_REVERB_GAIN_ADJUST |
| 8609 | * - #AUDPROC_PARAM_ID_REVERB_ROOM_LEVEL |
| 8610 | * - #AUDPROC_PARAM_ID_REVERB_ROOM_HF_LEVEL |
| 8611 | * - #AUDPROC_PARAM_ID_REVERB_DECAY_TIME |
| 8612 | * - #AUDPROC_PARAM_ID_REVERB_DECAY_HF_RATIO |
| 8613 | * - #AUDPROC_PARAM_ID_REVERB_REFLECTIONS_LEVEL |
| 8614 | * - #AUDPROC_PARAM_ID_REVERB_REFLECTIONS_DELAY |
| 8615 | * - #AUDPROC_PARAM_ID_REVERB_LEVEL |
| 8616 | * - #AUDPROC_PARAM_ID_REVERB_DELAY |
| 8617 | * - #AUDPROC_PARAM_ID_REVERB_DIFFUSION |
| 8618 | * - #AUDPROC_PARAM_ID_REVERB_DENSITY |
| 8619 | */ |
| 8620 | #define AUDPROC_MODULE_ID_REVERB 0x000108AA |
| 8621 | /* ID of the Reverb enable parameter used by |
| 8622 | * AUDPROC_MODULE_ID_REVERB. |
| 8623 | */ |
| 8624 | #define AUDPROC_PARAM_ID_REVERB_ENABLE 0x000108AB |
| 8625 | /* ID of the Reverb mode parameter used by |
| 8626 | * AUDPROC_MODULE_ID_REVERB. |
| 8627 | */ |
| 8628 | #define AUDPROC_PARAM_ID_REVERB_MODE 0x000108AC |
| 8629 | /* ID of the Reverb preset parameter used by |
| 8630 | * AUDPROC_MODULE_ID_REVERB. |
| 8631 | */ |
| 8632 | #define AUDPROC_PARAM_ID_REVERB_PRESET 0x000108AD |
| 8633 | /* ID of the Reverb wet mix parameter used by |
| 8634 | * AUDPROC_MODULE_ID_REVERB. |
| 8635 | */ |
| 8636 | #define AUDPROC_PARAM_ID_REVERB_WET_MIX 0x000108AE |
| 8637 | /* ID of the Reverb gain adjust parameter used by |
| 8638 | * AUDPROC_MODULE_ID_REVERB. |
| 8639 | */ |
| 8640 | #define AUDPROC_PARAM_ID_REVERB_GAIN_ADJUST 0x000108AF |
| 8641 | /* ID of the Reverb room level parameter used by |
| 8642 | * AUDPROC_MODULE_ID_REVERB. |
| 8643 | */ |
| 8644 | #define AUDPROC_PARAM_ID_REVERB_ROOM_LEVEL 0x000108B0 |
| 8645 | /* ID of the Reverb room hf level parameter used by |
| 8646 | * AUDPROC_MODULE_ID_REVERB. |
| 8647 | */ |
| 8648 | #define AUDPROC_PARAM_ID_REVERB_ROOM_HF_LEVEL 0x000108B1 |
| 8649 | /* ID of the Reverb decay time parameter used by |
| 8650 | * AUDPROC_MODULE_ID_REVERB. |
| 8651 | */ |
| 8652 | #define AUDPROC_PARAM_ID_REVERB_DECAY_TIME 0x000108B2 |
| 8653 | /* ID of the Reverb decay hf ratio parameter used by |
| 8654 | * AUDPROC_MODULE_ID_REVERB. |
| 8655 | */ |
| 8656 | #define AUDPROC_PARAM_ID_REVERB_DECAY_HF_RATIO 0x000108B3 |
| 8657 | /* ID of the Reverb reflections level parameter used by |
| 8658 | * AUDPROC_MODULE_ID_REVERB. |
| 8659 | */ |
| 8660 | #define AUDPROC_PARAM_ID_REVERB_REFLECTIONS_LEVEL 0x000108B4 |
| 8661 | /* ID of the Reverb reflections delay parameter used by |
| 8662 | * AUDPROC_MODULE_ID_REVERB. |
| 8663 | */ |
| 8664 | #define AUDPROC_PARAM_ID_REVERB_REFLECTIONS_DELAY 0x000108B5 |
| 8665 | /* ID of the Reverb level parameter used by |
| 8666 | * AUDPROC_MODULE_ID_REVERB. |
| 8667 | */ |
| 8668 | #define AUDPROC_PARAM_ID_REVERB_LEVEL 0x000108B6 |
| 8669 | /* ID of the Reverb delay parameter used by |
| 8670 | * AUDPROC_MODULE_ID_REVERB. |
| 8671 | */ |
| 8672 | #define AUDPROC_PARAM_ID_REVERB_DELAY 0x000108B7 |
| 8673 | /* ID of the Reverb diffusion parameter used by |
| 8674 | * AUDPROC_MODULE_ID_REVERB. |
| 8675 | */ |
| 8676 | #define AUDPROC_PARAM_ID_REVERB_DIFFUSION 0x000108B8 |
| 8677 | /* ID of the Reverb density parameter used by |
| 8678 | * AUDPROC_MODULE_ID_REVERB. |
| 8679 | */ |
| 8680 | #define AUDPROC_PARAM_ID_REVERB_DENSITY 0x000108B9 |
| 8681 | |
| 8682 | /* ID of the Popless Equalizer module. This module supports the |
| 8683 | * following parameter IDs: |
| 8684 | * - #AUDPROC_PARAM_ID_EQ_ENABLE |
| 8685 | * - #AUDPROC_PARAM_ID_EQ_CONFIG |
| 8686 | * - #AUDPROC_PARAM_ID_EQ_NUM_BANDS |
| 8687 | * - #AUDPROC_PARAM_ID_EQ_BAND_LEVELS |
| 8688 | * - #AUDPROC_PARAM_ID_EQ_BAND_LEVEL_RANGE |
| 8689 | * - #AUDPROC_PARAM_ID_EQ_BAND_FREQS |
| 8690 | * - #AUDPROC_PARAM_ID_EQ_SINGLE_BAND_FREQ_RANGE |
| 8691 | * - #AUDPROC_PARAM_ID_EQ_SINGLE_BAND_FREQ |
| 8692 | * - #AUDPROC_PARAM_ID_EQ_BAND_INDEX |
| 8693 | * - #AUDPROC_PARAM_ID_EQ_PRESET_ID |
| 8694 | * - #AUDPROC_PARAM_ID_EQ_NUM_PRESETS |
| 8695 | * - #AUDPROC_PARAM_ID_EQ_GET_PRESET_NAME |
| 8696 | */ |
| 8697 | #define AUDPROC_MODULE_ID_POPLESS_EQUALIZER 0x000108BA |
| 8698 | /* ID of the Popless Equalizer enable parameter used by |
| 8699 | * AUDPROC_MODULE_ID_POPLESS_EQUALIZER. |
| 8700 | */ |
| 8701 | #define AUDPROC_PARAM_ID_EQ_ENABLE 0x000108BB |
| 8702 | /* ID of the Popless Equalizer config parameter used by |
| 8703 | * AUDPROC_MODULE_ID_POPLESS_EQUALIZER. |
| 8704 | */ |
| 8705 | #define AUDPROC_PARAM_ID_EQ_CONFIG 0x000108BC |
| 8706 | /* ID of the Popless Equalizer number of bands parameter used |
| 8707 | * by AUDPROC_MODULE_ID_POPLESS_EQUALIZER. This param ID is |
| 8708 | * used for get param only. |
| 8709 | */ |
| 8710 | #define AUDPROC_PARAM_ID_EQ_NUM_BANDS 0x000108BD |
| 8711 | /* ID of the Popless Equalizer band levels parameter used by |
| 8712 | * AUDPROC_MODULE_ID_POPLESS_EQUALIZER. This param ID is |
| 8713 | * used for get param only. |
| 8714 | */ |
| 8715 | #define AUDPROC_PARAM_ID_EQ_BAND_LEVELS 0x000108BE |
| 8716 | /* ID of the Popless Equalizer band level range parameter used |
| 8717 | * by AUDPROC_MODULE_ID_POPLESS_EQUALIZER. This param ID is |
| 8718 | * used for get param only. |
| 8719 | */ |
| 8720 | #define AUDPROC_PARAM_ID_EQ_BAND_LEVEL_RANGE 0x000108BF |
| 8721 | /* ID of the Popless Equalizer band frequencies parameter used |
| 8722 | * by AUDPROC_MODULE_ID_POPLESS_EQUALIZER. This param ID is |
| 8723 | * used for get param only. |
| 8724 | */ |
| 8725 | #define AUDPROC_PARAM_ID_EQ_BAND_FREQS 0x000108C0 |
| 8726 | /* ID of the Popless Equalizer single band frequency range |
| 8727 | * parameter used by AUDPROC_MODULE_ID_POPLESS_EQUALIZER. |
| 8728 | * This param ID is used for get param only. |
| 8729 | */ |
| 8730 | #define AUDPROC_PARAM_ID_EQ_SINGLE_BAND_FREQ_RANGE 0x000108C1 |
| 8731 | /* ID of the Popless Equalizer single band frequency parameter |
| 8732 | * used by AUDPROC_MODULE_ID_POPLESS_EQUALIZER. This param ID |
| 8733 | * is used for set param only. |
| 8734 | */ |
| 8735 | #define AUDPROC_PARAM_ID_EQ_SINGLE_BAND_FREQ 0x000108C2 |
| 8736 | /* ID of the Popless Equalizer band index parameter used by |
| 8737 | * AUDPROC_MODULE_ID_POPLESS_EQUALIZER. |
| 8738 | */ |
| 8739 | #define AUDPROC_PARAM_ID_EQ_BAND_INDEX 0x000108C3 |
| 8740 | /* ID of the Popless Equalizer preset id parameter used by |
| 8741 | * AUDPROC_MODULE_ID_POPLESS_EQUALIZER. This param ID is used |
| 8742 | * for get param only. |
| 8743 | */ |
| 8744 | #define AUDPROC_PARAM_ID_EQ_PRESET_ID 0x000108C4 |
| 8745 | /* ID of the Popless Equalizer number of presets parameter used |
| 8746 | * by AUDPROC_MODULE_ID_POPLESS_EQUALIZER. This param ID is used |
| 8747 | * for get param only. |
| 8748 | */ |
| 8749 | #define AUDPROC_PARAM_ID_EQ_NUM_PRESETS 0x000108C5 |
| 8750 | /* ID of the Popless Equalizer preset name parameter used by |
| 8751 | * AUDPROC_MODULE_ID_POPLESS_EQUALIZER. This param ID is used |
| 8752 | * for get param only. |
| 8753 | */ |
| 8754 | #define AUDPROC_PARAM_ID_EQ_PRESET_NAME 0x000108C6 |
| 8755 | |
| 8756 | /* Set Q6 topologies */ |
| 8757 | #define ASM_CMD_ADD_TOPOLOGIES 0x00010DBE |
| 8758 | #define ADM_CMD_ADD_TOPOLOGIES 0x00010335 |
| 8759 | #define AFE_CMD_ADD_TOPOLOGIES 0x000100f8 |
| 8760 | /* structure used for both ioctls */ |
| 8761 | struct cmd_set_topologies { |
| 8762 | struct apr_hdr hdr; |
| 8763 | u32 payload_addr_lsw; |
| 8764 | /* LSW of parameter data payload address.*/ |
| 8765 | u32 payload_addr_msw; |
| 8766 | /* MSW of parameter data payload address.*/ |
| 8767 | u32 mem_map_handle; |
| 8768 | /* Memory map handle returned by mem map command */ |
| 8769 | u32 payload_size; |
| 8770 | /* Size in bytes of the variable payload in shared memory */ |
| 8771 | } __packed; |
| 8772 | |
| 8773 | /* This module represents the Rx processing of Feedback speaker protection. |
| 8774 | * It contains the excursion control, thermal protection, |
| 8775 | * analog clip manager features in it. |
| 8776 | * This module id will support following param ids. |
| 8777 | * - AFE_PARAM_ID_FBSP_MODE_RX_CFG |
| 8778 | */ |
| 8779 | |
| 8780 | #define AFE_MODULE_FB_SPKR_PROT_RX 0x0001021C |
| 8781 | #define AFE_MODULE_FB_SPKR_PROT_V2_RX 0x0001025F |
| 8782 | |
| 8783 | #define AFE_PARAM_ID_FBSP_MODE_RX_CFG 0x0001021D |
| 8784 | #define AFE_PARAM_ID_FBSP_PTONE_RAMP_CFG 0x00010260 |
| 8785 | |
| 8786 | struct asm_fbsp_mode_rx_cfg { |
| 8787 | uint32_t minor_version; |
| 8788 | uint32_t mode; |
| 8789 | } __packed; |
| 8790 | |
| 8791 | /* This module represents the VI processing of feedback speaker protection. |
| 8792 | * It will receive Vsens and Isens from codec and generates necessary |
| 8793 | * parameters needed by Rx processing. |
| 8794 | * This module id will support following param ids. |
| 8795 | * - AFE_PARAM_ID_SPKR_CALIB_VI_PROC_CFG |
| 8796 | * - AFE_PARAM_ID_CALIB_RES_CFG |
| 8797 | * - AFE_PARAM_ID_FEEDBACK_PATH_CFG |
| 8798 | */ |
| 8799 | |
| 8800 | #define AFE_MODULE_FB_SPKR_PROT_VI_PROC 0x00010226 |
| 8801 | #define AFE_MODULE_FB_SPKR_PROT_VI_PROC_V2 0x0001026A |
| 8802 | |
| 8803 | #define AFE_PARAM_ID_SPKR_CALIB_VI_PROC_CFG 0x0001022A |
| 8804 | #define AFE_PARAM_ID_SPKR_CALIB_VI_PROC_CFG_V2 0x0001026B |
| 8805 | |
| 8806 | struct asm_spkr_calib_vi_proc_cfg { |
| 8807 | uint32_t minor_version; |
| 8808 | uint32_t operation_mode; |
| 8809 | uint32_t r0_t0_selection_flag[SP_V2_NUM_MAX_SPKR]; |
| 8810 | int32_t r0_cali_q24[SP_V2_NUM_MAX_SPKR]; |
| 8811 | int16_t t0_cali_q6[SP_V2_NUM_MAX_SPKR]; |
| 8812 | uint32_t quick_calib_flag; |
| 8813 | } __packed; |
| 8814 | |
| 8815 | #define AFE_PARAM_ID_CALIB_RES_CFG 0x0001022B |
| 8816 | #define AFE_PARAM_ID_CALIB_RES_CFG_V2 0x0001026E |
| 8817 | |
| 8818 | struct asm_calib_res_cfg { |
| 8819 | uint32_t minor_version; |
| 8820 | int32_t r0_cali_q24[SP_V2_NUM_MAX_SPKR]; |
| 8821 | uint32_t th_vi_ca_state; |
| 8822 | } __packed; |
| 8823 | |
| 8824 | #define AFE_PARAM_ID_FEEDBACK_PATH_CFG 0x0001022C |
| 8825 | #define AFE_MODULE_FEEDBACK 0x00010257 |
| 8826 | |
| 8827 | struct asm_feedback_path_cfg { |
| 8828 | uint32_t minor_version; |
| 8829 | int32_t dst_portid; |
| 8830 | int32_t num_channels; |
| 8831 | int32_t chan_info[4]; |
| 8832 | } __packed; |
| 8833 | |
| 8834 | #define AFE_PARAM_ID_MODE_VI_PROC_CFG 0x00010227 |
| 8835 | |
| 8836 | struct asm_mode_vi_proc_cfg { |
| 8837 | uint32_t minor_version; |
| 8838 | uint32_t cal_mode; |
| 8839 | } __packed; |
| 8840 | |
| 8841 | #define AFE_MODULE_SPEAKER_PROTECTION_V2_TH_VI 0x0001026A |
| 8842 | #define AFE_PARAM_ID_SP_V2_TH_VI_MODE_CFG 0x0001026B |
| 8843 | #define AFE_PARAM_ID_SP_V2_TH_VI_FTM_CFG 0x0001029F |
| 8844 | #define AFE_PARAM_ID_SP_V2_TH_VI_FTM_PARAMS 0x000102A0 |
| 8845 | |
| 8846 | struct afe_sp_th_vi_mode_cfg { |
| 8847 | uint32_t minor_version; |
| 8848 | uint32_t operation_mode; |
| 8849 | /* |
| 8850 | * Operation mode of thermal VI module. |
| 8851 | * 0 -- Normal Running mode |
| 8852 | * 1 -- Calibration mode |
| 8853 | * 2 -- FTM mode |
| 8854 | */ |
| 8855 | uint32_t r0t0_selection_flag[SP_V2_NUM_MAX_SPKR]; |
| 8856 | /* |
| 8857 | * Specifies which set of R0, T0 values the algorithm will use. |
| 8858 | * This field is valid only in Normal mode (operation_mode = 0). |
| 8859 | * 0 -- Use calibrated R0, T0 value |
| 8860 | * 1 -- Use safe R0, T0 value |
| 8861 | */ |
| 8862 | int32_t r0_cali_q24[SP_V2_NUM_MAX_SPKR]; |
| 8863 | /* |
| 8864 | * Calibration point resistance per device. This field is valid |
| 8865 | * only in Normal mode (operation_mode = 0). |
| 8866 | * values 33554432 to 1073741824 Ohms (in Q24 format) |
| 8867 | */ |
| 8868 | int16_t t0_cali_q6[SP_V2_NUM_MAX_SPKR]; |
| 8869 | /* |
| 8870 | * Calibration point temperature per device. This field is valid |
| 8871 | * in both Normal mode and Calibration mode. |
| 8872 | * values -1920 to 5120 degrees C (in Q6 format) |
| 8873 | */ |
| 8874 | uint32_t quick_calib_flag; |
| 8875 | /* |
| 8876 | * Indicates whether calibration is to be done in quick mode or not. |
| 8877 | * This field is valid only in Calibration mode (operation_mode = 1). |
| 8878 | * 0 -- Disabled |
| 8879 | * 1 -- Enabled |
| 8880 | */ |
| 8881 | } __packed; |
| 8882 | |
| 8883 | struct afe_sp_th_vi_ftm_cfg { |
| 8884 | uint32_t minor_version; |
| 8885 | uint32_t wait_time_ms[SP_V2_NUM_MAX_SPKR]; |
| 8886 | /* |
| 8887 | * Wait time to heat up speaker before collecting statistics |
| 8888 | * for ftm mode in ms. |
| 8889 | * values 0 to 4294967295 ms |
| 8890 | */ |
| 8891 | uint32_t ftm_time_ms[SP_V2_NUM_MAX_SPKR]; |
| 8892 | /* |
| 8893 | * duration for which FTM statistics are collected in ms. |
| 8894 | * values 0 to 2000 ms |
| 8895 | */ |
| 8896 | } __packed; |
| 8897 | |
| 8898 | struct afe_sp_th_vi_ftm_params { |
| 8899 | uint32_t minor_version; |
| 8900 | int32_t dc_res_q24[SP_V2_NUM_MAX_SPKR]; |
| 8901 | /* |
| 8902 | * DC resistance value in q24 format |
| 8903 | * values 0 to 2147483647 Ohms (in Q24 format) |
| 8904 | */ |
| 8905 | int32_t temp_q22[SP_V2_NUM_MAX_SPKR]; |
| 8906 | /* |
| 8907 | * temperature value in q22 format |
| 8908 | * values -125829120 to 2147483647 degC (in Q22 format) |
| 8909 | */ |
| 8910 | uint32_t status[SP_V2_NUM_MAX_SPKR]; |
| 8911 | /* |
| 8912 | * FTM packet status |
| 8913 | * 0 - Incorrect operation mode.This status is returned |
| 8914 | * when GET_PARAM is called in non FTM Mode |
| 8915 | * 1 - Inactive mode -- Port is not yet started. |
| 8916 | * 2 - Wait state. wait_time_ms has not yet elapsed |
| 8917 | * 3 - In progress state. ftm_time_ms has not yet elapsed. |
| 8918 | * 4 - Success. |
| 8919 | * 5 - Failed. |
| 8920 | */ |
| 8921 | } __packed; |
| 8922 | |
| 8923 | struct afe_sp_th_vi_get_param { |
| 8924 | struct apr_hdr hdr; |
| 8925 | struct afe_port_cmd_get_param_v2 get_param; |
| 8926 | struct afe_port_param_data_v2 pdata; |
| 8927 | struct afe_sp_th_vi_ftm_params param; |
| 8928 | } __packed; |
| 8929 | |
| 8930 | struct afe_sp_th_vi_get_param_resp { |
| 8931 | uint32_t status; |
| 8932 | struct afe_port_param_data_v2 pdata; |
| 8933 | struct afe_sp_th_vi_ftm_params param; |
| 8934 | } __packed; |
| 8935 | |
| 8936 | |
| 8937 | #define AFE_MODULE_SPEAKER_PROTECTION_V2_EX_VI 0x0001026F |
| 8938 | #define AFE_PARAM_ID_SP_V2_EX_VI_MODE_CFG 0x000102A1 |
| 8939 | #define AFE_PARAM_ID_SP_V2_EX_VI_FTM_CFG 0x000102A2 |
| 8940 | #define AFE_PARAM_ID_SP_V2_EX_VI_FTM_PARAMS 0x000102A3 |
| 8941 | |
| 8942 | struct afe_sp_ex_vi_mode_cfg { |
| 8943 | uint32_t minor_version; |
| 8944 | uint32_t operation_mode; |
| 8945 | /* |
| 8946 | * Operation mode of Excursion VI module. |
| 8947 | * 0 - Normal Running mode |
| 8948 | * 2 - FTM mode |
| 8949 | */ |
| 8950 | } __packed; |
| 8951 | |
| 8952 | struct afe_sp_ex_vi_ftm_cfg { |
| 8953 | uint32_t minor_version; |
| 8954 | uint32_t wait_time_ms[SP_V2_NUM_MAX_SPKR]; |
| 8955 | /* |
| 8956 | * Wait time to heat up speaker before collecting statistics |
| 8957 | * for ftm mode in ms. |
| 8958 | * values 0 to 4294967295 ms |
| 8959 | */ |
| 8960 | uint32_t ftm_time_ms[SP_V2_NUM_MAX_SPKR]; |
| 8961 | /* |
| 8962 | * duration for which FTM statistics are collected in ms. |
| 8963 | * values 0 to 2000 ms |
| 8964 | */ |
| 8965 | } __packed; |
| 8966 | |
| 8967 | struct afe_sp_ex_vi_ftm_params { |
| 8968 | uint32_t minor_version; |
| 8969 | int32_t freq_q20[SP_V2_NUM_MAX_SPKR]; |
| 8970 | /* |
| 8971 | * Resonance frequency in q20 format |
| 8972 | * values 0 to 2147483647 Hz (in Q20 format) |
| 8973 | */ |
| 8974 | int32_t resis_q24[SP_V2_NUM_MAX_SPKR]; |
| 8975 | /* |
| 8976 | * Mechanical resistance in q24 format |
| 8977 | * values 0 to 2147483647 Ohms (in Q24 format) |
| 8978 | */ |
| 8979 | int32_t qmct_q24[SP_V2_NUM_MAX_SPKR]; |
| 8980 | /* |
| 8981 | * Mechanical Qfactor in q24 format |
| 8982 | * values 0 to 2147483647 (in Q24 format) |
| 8983 | */ |
| 8984 | uint32_t status[SP_V2_NUM_MAX_SPKR]; |
| 8985 | /* |
| 8986 | * FTM packet status |
| 8987 | * 0 - Incorrect operation mode.This status is returned |
| 8988 | * when GET_PARAM is called in non FTM Mode. |
| 8989 | * 1 - Inactive mode -- Port is not yet started. |
| 8990 | * 2 - Wait state. wait_time_ms has not yet elapsed |
| 8991 | * 3 - In progress state. ftm_time_ms has not yet elapsed. |
| 8992 | * 4 - Success. |
| 8993 | * 5 - Failed. |
| 8994 | */ |
| 8995 | } __packed; |
| 8996 | |
| 8997 | struct afe_sp_ex_vi_get_param { |
| 8998 | struct apr_hdr hdr; |
| 8999 | struct afe_port_cmd_get_param_v2 get_param; |
| 9000 | struct afe_port_param_data_v2 pdata; |
| 9001 | struct afe_sp_ex_vi_ftm_params param; |
| 9002 | } __packed; |
| 9003 | |
| 9004 | struct afe_sp_ex_vi_get_param_resp { |
| 9005 | uint32_t status; |
| 9006 | struct afe_port_param_data_v2 pdata; |
| 9007 | struct afe_sp_ex_vi_ftm_params param; |
| 9008 | } __packed; |
| 9009 | |
| 9010 | union afe_spkr_prot_config { |
| 9011 | struct asm_fbsp_mode_rx_cfg mode_rx_cfg; |
| 9012 | struct asm_spkr_calib_vi_proc_cfg vi_proc_cfg; |
| 9013 | struct asm_feedback_path_cfg feedback_path_cfg; |
| 9014 | struct asm_mode_vi_proc_cfg mode_vi_proc_cfg; |
| 9015 | struct afe_sp_th_vi_mode_cfg th_vi_mode_cfg; |
| 9016 | struct afe_sp_th_vi_ftm_cfg th_vi_ftm_cfg; |
| 9017 | struct afe_sp_ex_vi_mode_cfg ex_vi_mode_cfg; |
| 9018 | struct afe_sp_ex_vi_ftm_cfg ex_vi_ftm_cfg; |
| 9019 | } __packed; |
| 9020 | |
| 9021 | struct afe_spkr_prot_config_command { |
| 9022 | struct apr_hdr hdr; |
| 9023 | struct afe_port_cmd_set_param_v2 param; |
| 9024 | struct afe_port_param_data_v2 pdata; |
| 9025 | union afe_spkr_prot_config prot_config; |
| 9026 | } __packed; |
| 9027 | |
| 9028 | struct afe_spkr_prot_get_vi_calib { |
| 9029 | struct apr_hdr hdr; |
| 9030 | struct afe_port_cmd_get_param_v2 get_param; |
| 9031 | struct afe_port_param_data_v2 pdata; |
| 9032 | struct asm_calib_res_cfg res_cfg; |
| 9033 | } __packed; |
| 9034 | |
| 9035 | struct afe_spkr_prot_calib_get_resp { |
| 9036 | uint32_t status; |
| 9037 | struct afe_port_param_data_v2 pdata; |
| 9038 | struct asm_calib_res_cfg res_cfg; |
| 9039 | } __packed; |
| 9040 | |
| 9041 | |
| 9042 | /* SRS TRUMEDIA start */ |
| 9043 | /* topology */ |
| 9044 | #define SRS_TRUMEDIA_TOPOLOGY_ID 0x00010D90 |
| 9045 | /* module */ |
| 9046 | #define SRS_TRUMEDIA_MODULE_ID 0x10005010 |
| 9047 | /* parameters */ |
| 9048 | #define SRS_TRUMEDIA_PARAMS 0x10005011 |
| 9049 | #define SRS_TRUMEDIA_PARAMS_WOWHD 0x10005012 |
| 9050 | #define SRS_TRUMEDIA_PARAMS_CSHP 0x10005013 |
| 9051 | #define SRS_TRUMEDIA_PARAMS_HPF 0x10005014 |
| 9052 | #define SRS_TRUMEDIA_PARAMS_AEQ 0x10005015 |
| 9053 | #define SRS_TRUMEDIA_PARAMS_HL 0x10005016 |
| 9054 | #define SRS_TRUMEDIA_PARAMS_GEQ 0x10005017 |
| 9055 | |
| 9056 | #define SRS_ID_GLOBAL 0x00000001 |
| 9057 | #define SRS_ID_WOWHD 0x00000002 |
| 9058 | #define SRS_ID_CSHP 0x00000003 |
| 9059 | #define SRS_ID_HPF 0x00000004 |
| 9060 | #define SRS_ID_AEQ 0x00000005 |
| 9061 | #define SRS_ID_HL 0x00000006 |
| 9062 | #define SRS_ID_GEQ 0x00000007 |
| 9063 | |
| 9064 | #define SRS_CMD_UPLOAD 0x7FFF0000 |
| 9065 | #define SRS_PARAM_OFFSET_MASK 0x3FFF0000 |
| 9066 | #define SRS_PARAM_VALUE_MASK 0x0000FFFF |
| 9067 | |
| 9068 | struct srs_trumedia_params_GLOBAL { |
| 9069 | uint8_t v1; |
| 9070 | uint8_t v2; |
| 9071 | uint8_t v3; |
| 9072 | uint8_t v4; |
| 9073 | uint8_t v5; |
| 9074 | uint8_t v6; |
| 9075 | uint8_t v7; |
| 9076 | uint8_t v8; |
| 9077 | uint16_t v9; |
| 9078 | } __packed; |
| 9079 | |
| 9080 | struct srs_trumedia_params_WOWHD { |
| 9081 | uint32_t v1; |
| 9082 | uint16_t v2; |
| 9083 | uint16_t v3; |
| 9084 | uint16_t v4; |
| 9085 | uint16_t v5; |
| 9086 | uint16_t v6; |
| 9087 | uint16_t v7; |
| 9088 | uint16_t v8; |
| 9089 | uint16_t v____A1; |
| 9090 | uint32_t v9; |
| 9091 | uint16_t v10; |
| 9092 | uint16_t v11; |
| 9093 | uint32_t v12[16]; |
| 9094 | uint32_t v13[16]; |
| 9095 | uint32_t v14[16]; |
| 9096 | uint32_t v15[16]; |
| 9097 | uint32_t v16; |
| 9098 | uint16_t v17; |
| 9099 | uint16_t v18; |
| 9100 | } __packed; |
| 9101 | |
| 9102 | struct srs_trumedia_params_CSHP { |
| 9103 | uint32_t v1; |
| 9104 | uint16_t v2; |
| 9105 | uint16_t v3; |
| 9106 | uint16_t v4; |
| 9107 | uint16_t v5; |
| 9108 | uint16_t v6; |
| 9109 | uint16_t v____A1; |
| 9110 | uint32_t v7; |
| 9111 | uint16_t v8; |
| 9112 | uint16_t v9; |
| 9113 | uint32_t v10[16]; |
| 9114 | } __packed; |
| 9115 | |
| 9116 | struct srs_trumedia_params_HPF { |
| 9117 | uint32_t v1; |
| 9118 | uint32_t v2[26]; |
| 9119 | } __packed; |
| 9120 | |
| 9121 | struct srs_trumedia_params_AEQ { |
| 9122 | uint32_t v1; |
| 9123 | uint16_t v2; |
| 9124 | uint16_t v3; |
| 9125 | uint16_t v4; |
| 9126 | uint16_t v____A1; |
| 9127 | uint32_t v5[74]; |
| 9128 | uint32_t v6[74]; |
| 9129 | uint16_t v7[2048]; |
| 9130 | } __packed; |
| 9131 | |
| 9132 | struct srs_trumedia_params_HL { |
| 9133 | uint16_t v1; |
| 9134 | uint16_t v2; |
| 9135 | uint16_t v3; |
| 9136 | uint16_t v____A1; |
| 9137 | int32_t v4; |
| 9138 | uint32_t v5; |
| 9139 | uint16_t v6; |
| 9140 | uint16_t v____A2; |
| 9141 | uint32_t v7; |
| 9142 | } __packed; |
| 9143 | |
| 9144 | struct srs_trumedia_params_GEQ { |
| 9145 | int16_t v1[10]; |
| 9146 | } __packed; |
| 9147 | struct srs_trumedia_params { |
| 9148 | struct srs_trumedia_params_GLOBAL global; |
| 9149 | struct srs_trumedia_params_WOWHD wowhd; |
| 9150 | struct srs_trumedia_params_CSHP cshp; |
| 9151 | struct srs_trumedia_params_HPF hpf; |
| 9152 | struct srs_trumedia_params_AEQ aeq; |
| 9153 | struct srs_trumedia_params_HL hl; |
| 9154 | struct srs_trumedia_params_GEQ geq; |
| 9155 | } __packed; |
| 9156 | /* SRS TruMedia end */ |
| 9157 | |
| 9158 | #define AUDPROC_PARAM_ID_ENABLE 0x00010904 |
| 9159 | #define ASM_STREAM_POSTPROC_TOPO_ID_SA_PLUS 0x1000FFFF |
| 9160 | /* DTS Eagle */ |
| 9161 | #define AUDPROC_MODULE_ID_DTS_HPX_PREMIX 0x0001077C |
| 9162 | #define AUDPROC_MODULE_ID_DTS_HPX_POSTMIX 0x0001077B |
| 9163 | #define ASM_STREAM_POSTPROC_TOPO_ID_DTS_HPX 0x00010DED |
| 9164 | #define ASM_STREAM_POSTPROC_TOPO_ID_HPX_PLUS 0x10015000 |
| 9165 | #define ASM_STREAM_POSTPROC_TOPO_ID_HPX_MASTER 0x10015001 |
| 9166 | struct asm_dts_eagle_param { |
| 9167 | struct apr_hdr hdr; |
| 9168 | struct asm_stream_cmd_set_pp_params_v2 param; |
| 9169 | struct asm_stream_param_data_v2 data; |
| 9170 | } __packed; |
| 9171 | |
| 9172 | struct asm_dts_eagle_param_get { |
| 9173 | struct apr_hdr hdr; |
| 9174 | struct asm_stream_cmd_get_pp_params_v2 param; |
| 9175 | } __packed; |
| 9176 | |
| 9177 | /* Opcode to set BT address and license for aptx decoder */ |
| 9178 | #define APTX_DECODER_BT_ADDRESS 0x00013201 |
| 9179 | #define APTX_CLASSIC_DEC_LICENSE_ID 0x00013202 |
| 9180 | |
| 9181 | struct aptx_dec_bt_addr_cfg { |
| 9182 | uint32_t lap; |
| 9183 | uint32_t uap; |
| 9184 | uint32_t nap; |
| 9185 | } __packed; |
| 9186 | |
| 9187 | struct aptx_dec_bt_dev_addr { |
| 9188 | struct apr_hdr hdr; |
| 9189 | struct asm_stream_cmd_set_encdec_param encdec; |
| 9190 | struct aptx_dec_bt_addr_cfg bt_addr_cfg; |
| 9191 | } __packed; |
| 9192 | |
| 9193 | struct asm_aptx_dec_fmt_blk_v2 { |
| 9194 | struct apr_hdr hdr; |
| 9195 | struct asm_data_cmd_media_fmt_update_v2 fmtblk; |
| 9196 | u32 sample_rate; |
| 9197 | /* Number of samples per second. |
| 9198 | * Supported values: 44100 and 48000 Hz |
| 9199 | */ |
| 9200 | } __packed; |
| 9201 | |
Laxminath Kasam | 38070be | 2017-08-17 18:21:59 +0530 | [diff] [blame] | 9202 | /* Q6Core Specific */ |
| 9203 | #define AVCS_CMD_GET_FWK_VERSION (0x0001292C) |
| 9204 | #define AVCS_CMDRSP_GET_FWK_VERSION (0x0001292D) |
| 9205 | |
| 9206 | #define AVCS_SERVICE_ID_ALL (0xFFFFFFFF) |
| 9207 | #define APRV2_IDS_SERVICE_ID_ADSP_CVP_V (0xB) |
| 9208 | |
| 9209 | struct avcs_get_fwk_version { |
| 9210 | /* |
| 9211 | * Indicates the major version of the AVS build. |
| 9212 | * This value is incremented on chipset family boundaries. |
| 9213 | */ |
| 9214 | uint32_t build_major_version; |
| 9215 | |
| 9216 | /* |
| 9217 | * Minor version of the AVS build. |
| 9218 | * This value represents the mainline to which the AVS build belongs. |
| 9219 | */ |
| 9220 | uint32_t build_minor_version; |
| 9221 | |
| 9222 | /* Indicates the AVS branch version to which the image belongs. */ |
| 9223 | uint32_t build_branch_version; |
| 9224 | |
| 9225 | /* Indicates the AVS sub-branch or customer product line information. */ |
| 9226 | uint32_t build_subbranch_version; |
| 9227 | |
| 9228 | /* Number of supported AVS services in the current build. */ |
| 9229 | uint32_t num_services; |
| 9230 | }; |
| 9231 | |
| 9232 | struct avs_svc_api_info { |
| 9233 | /* |
| 9234 | * APRV2 service IDs for the individual static services. |
| 9235 | * |
| 9236 | * @values |
| 9237 | * - APRV2_IDS_SERVICE_ID_ADSP_CORE_V |
| 9238 | * - APRV2_IDS_SERVICE_ID_ADSP_AFE_V |
| 9239 | * - APRV2_IDS_SERVICE_ID_ADSP_ASM_V |
| 9240 | * - APRV2_IDS_SERVICE_ID_ADSP_ADM_V |
| 9241 | * - APRV2_IDS_SERVICE_ID_ADSP_MVM_V |
| 9242 | * - APRV2_IDS_SERVICE_ID_ADSP_CVS_V |
| 9243 | * - APRV2_IDS_SERVICE_ID_ADSP_CVP_V |
| 9244 | * - APRV2_IDS_SERVICE_ID_ADSP_LSM_V |
| 9245 | */ |
| 9246 | uint32_t service_id; |
| 9247 | |
| 9248 | /* |
| 9249 | * Indicates the API version of the service. |
| 9250 | * |
| 9251 | * Each new API update that warrants a change on the HLOS side triggers |
| 9252 | * an increment in the version. |
| 9253 | */ |
| 9254 | uint32_t api_version; |
| 9255 | |
| 9256 | /* |
| 9257 | * Indicates the API increments on a sub-branch (not on the mainline). |
| 9258 | * |
| 9259 | * API branch version numbers can increment independently on different |
| 9260 | * sub-branches. |
| 9261 | */ |
| 9262 | uint32_t api_branch_version; |
| 9263 | }; |
| 9264 | |
| 9265 | struct avcs_fwk_ver_info { |
| 9266 | struct avcs_get_fwk_version avcs_fwk_version; |
Siena Richard | 2d0102d | 2017-09-05 11:15:45 -0700 | [diff] [blame^] | 9267 | struct avs_svc_api_info services[0]; |
Laxminath Kasam | 38070be | 2017-08-17 18:21:59 +0530 | [diff] [blame] | 9268 | } __packed; |
| 9269 | |
Asish Bhattacharya | 8e2277f | 2017-07-20 18:31:55 +0530 | [diff] [blame] | 9270 | /* LSM Specific */ |
| 9271 | #define VW_FEAT_DIM (39) |
| 9272 | |
| 9273 | #define APRV2_IDS_SERVICE_ID_ADSP_LSM_V (0xD) |
| 9274 | #define APRV2_IDS_DOMAIN_ID_ADSP_V (0x4) |
| 9275 | #define APRV2_IDS_DOMAIN_ID_APPS_V (0x5) |
| 9276 | |
| 9277 | #define LSM_SESSION_CMD_SHARED_MEM_MAP_REGIONS (0x00012A7F) |
| 9278 | #define LSM_SESSION_CMDRSP_SHARED_MEM_MAP_REGIONS (0x00012A80) |
| 9279 | #define LSM_SESSION_CMD_SHARED_MEM_UNMAP_REGIONS (0x00012A81) |
| 9280 | #define LSM_SESSION_CMD_OPEN_TX (0x00012A82) |
| 9281 | #define LSM_SESSION_CMD_CLOSE_TX (0x00012A88) |
| 9282 | #define LSM_SESSION_CMD_SET_PARAMS (0x00012A83) |
| 9283 | #define LSM_SESSION_CMD_SET_PARAMS_V2 (0x00012A8F) |
| 9284 | #define LSM_SESSION_CMD_REGISTER_SOUND_MODEL (0x00012A84) |
| 9285 | #define LSM_SESSION_CMD_DEREGISTER_SOUND_MODEL (0x00012A85) |
| 9286 | #define LSM_SESSION_CMD_START (0x00012A86) |
| 9287 | #define LSM_SESSION_CMD_STOP (0x00012A87) |
| 9288 | #define LSM_SESSION_CMD_EOB (0x00012A89) |
| 9289 | #define LSM_SESSION_CMD_READ (0x00012A8A) |
| 9290 | #define LSM_SESSION_CMD_OPEN_TX_V2 (0x00012A8B) |
| 9291 | #define LSM_CMD_ADD_TOPOLOGIES (0x00012A8C) |
| 9292 | |
| 9293 | #define LSM_SESSION_EVENT_DETECTION_STATUS (0x00012B00) |
| 9294 | #define LSM_SESSION_EVENT_DETECTION_STATUS_V2 (0x00012B01) |
| 9295 | #define LSM_DATA_EVENT_READ_DONE (0x00012B02) |
| 9296 | #define LSM_DATA_EVENT_STATUS (0x00012B03) |
| 9297 | #define LSM_SESSION_EVENT_DETECTION_STATUS_V3 (0x00012B04) |
| 9298 | |
| 9299 | #define LSM_MODULE_ID_VOICE_WAKEUP (0x00012C00) |
| 9300 | #define LSM_PARAM_ID_ENDPOINT_DETECT_THRESHOLD (0x00012C01) |
| 9301 | #define LSM_PARAM_ID_OPERATION_MODE (0x00012C02) |
| 9302 | #define LSM_PARAM_ID_GAIN (0x00012C03) |
| 9303 | #define LSM_PARAM_ID_CONNECT_TO_PORT (0x00012C04) |
| 9304 | #define LSM_PARAM_ID_FEATURE_COMPENSATION_DATA (0x00012C07) |
| 9305 | #define LSM_PARAM_ID_MIN_CONFIDENCE_LEVELS (0x00012C07) |
| 9306 | #define LSM_MODULE_ID_LAB (0x00012C08) |
| 9307 | #define LSM_PARAM_ID_LAB_ENABLE (0x00012C09) |
| 9308 | #define LSM_PARAM_ID_LAB_CONFIG (0x00012C0A) |
| 9309 | #define LSM_MODULE_ID_FRAMEWORK (0x00012C0E) |
| 9310 | #define LSM_PARAM_ID_SWMAD_CFG (0x00012C18) |
| 9311 | #define LSM_PARAM_ID_SWMAD_MODEL (0x00012C19) |
| 9312 | #define LSM_PARAM_ID_SWMAD_ENABLE (0x00012C1A) |
| 9313 | #define LSM_PARAM_ID_POLLING_ENABLE (0x00012C1B) |
| 9314 | #define LSM_PARAM_ID_MEDIA_FMT (0x00012C1E) |
| 9315 | #define LSM_PARAM_ID_FWK_MODE_CONFIG (0x00012C27) |
| 9316 | |
| 9317 | /* HW MAD specific */ |
| 9318 | #define AFE_MODULE_HW_MAD (0x00010230) |
| 9319 | #define AFE_PARAM_ID_HW_MAD_CFG (0x00010231) |
| 9320 | #define AFE_PARAM_ID_HW_MAD_CTRL (0x00010232) |
| 9321 | #define AFE_PARAM_ID_SLIMBUS_SLAVE_PORT_CFG (0x00010233) |
| 9322 | |
| 9323 | /* SW MAD specific */ |
| 9324 | #define AFE_MODULE_SW_MAD (0x0001022D) |
| 9325 | #define AFE_PARAM_ID_SW_MAD_CFG (0x0001022E) |
| 9326 | #define AFE_PARAM_ID_SVM_MODEL (0x0001022F) |
| 9327 | |
| 9328 | /* Commands/Params to pass the codec/slimbus data to DSP */ |
| 9329 | #define AFE_SVC_CMD_SET_PARAM (0x000100f3) |
| 9330 | #define AFE_MODULE_CDC_DEV_CFG (0x00010234) |
| 9331 | #define AFE_PARAM_ID_CDC_SLIMBUS_SLAVE_CFG (0x00010235) |
| 9332 | #define AFE_PARAM_ID_CDC_REG_CFG (0x00010236) |
| 9333 | #define AFE_PARAM_ID_CDC_REG_CFG_INIT (0x00010237) |
| 9334 | #define AFE_PARAM_ID_CDC_REG_PAGE_CFG (0x00010296) |
| 9335 | |
| 9336 | #define AFE_MAX_CDC_REGISTERS_TO_CONFIG (20) |
| 9337 | |
| 9338 | /* AANC Port Config Specific */ |
| 9339 | #define AFE_PARAM_ID_AANC_PORT_CONFIG (0x00010215) |
| 9340 | #define AFE_API_VERSION_AANC_PORT_CONFIG (0x1) |
| 9341 | #define AANC_TX_MIC_UNUSED (0) |
| 9342 | #define AANC_TX_VOICE_MIC (1) |
| 9343 | #define AANC_TX_ERROR_MIC (2) |
| 9344 | #define AANC_TX_NOISE_MIC (3) |
| 9345 | #define AFE_PORT_MAX_CHANNEL_CNT (8) |
| 9346 | #define AFE_MODULE_AANC (0x00010214) |
| 9347 | #define AFE_PARAM_ID_CDC_AANC_VERSION (0x0001023A) |
| 9348 | #define AFE_API_VERSION_CDC_AANC_VERSION (0x1) |
| 9349 | #define AANC_HW_BLOCK_VERSION_1 (1) |
| 9350 | #define AANC_HW_BLOCK_VERSION_2 (2) |
| 9351 | |
| 9352 | /*Clip bank selection*/ |
| 9353 | #define AFE_API_VERSION_CLIP_BANK_SEL_CFG 0x1 |
| 9354 | #define AFE_CLIP_MAX_BANKS 4 |
| 9355 | #define AFE_PARAM_ID_CLIP_BANK_SEL_CFG 0x00010242 |
| 9356 | |
| 9357 | struct afe_param_aanc_port_cfg { |
| 9358 | /* Minor version used for tracking the version of the module's |
| 9359 | * source port configuration. |
| 9360 | */ |
| 9361 | uint32_t aanc_port_cfg_minor_version; |
| 9362 | |
| 9363 | /* Sampling rate of the source Tx port. 8k - 192k*/ |
| 9364 | uint32_t tx_port_sample_rate; |
| 9365 | |
| 9366 | /* Channel mapping for the Tx port signal carrying Noise (X), |
| 9367 | * Error (E), and Voice (V) signals. |
| 9368 | */ |
| 9369 | uint8_t tx_port_channel_map[AFE_PORT_MAX_CHANNEL_CNT]; |
| 9370 | |
| 9371 | /* Number of channels on the source Tx port. */ |
| 9372 | uint16_t tx_port_num_channels; |
| 9373 | |
| 9374 | /* Port ID of the Rx path reference signal. */ |
| 9375 | uint16_t rx_path_ref_port_id; |
| 9376 | |
| 9377 | /* Sampling rate of the reference port. 8k - 192k*/ |
| 9378 | uint32_t ref_port_sample_rate; |
| 9379 | } __packed; |
| 9380 | |
| 9381 | struct afe_param_id_cdc_aanc_version { |
| 9382 | /* Minor version used for tracking the version of the module's |
| 9383 | * hw version |
| 9384 | */ |
| 9385 | uint32_t cdc_aanc_minor_version; |
| 9386 | |
| 9387 | /* HW version. */ |
| 9388 | uint32_t aanc_hw_version; |
| 9389 | } __packed; |
| 9390 | |
| 9391 | struct afe_param_id_clip_bank_sel { |
| 9392 | /* Minor version used for tracking the version of the module's |
| 9393 | * hw version |
| 9394 | */ |
| 9395 | uint32_t minor_version; |
| 9396 | |
| 9397 | /* Number of banks to be read */ |
| 9398 | uint32_t num_banks; |
| 9399 | |
| 9400 | uint32_t bank_map[AFE_CLIP_MAX_BANKS]; |
| 9401 | } __packed; |
| 9402 | |
| 9403 | /* ERROR CODES */ |
| 9404 | /* Success. The operation completed with no errors. */ |
| 9405 | #define ADSP_EOK 0x00000000 |
| 9406 | /* General failure. */ |
| 9407 | #define ADSP_EFAILED 0x00000001 |
| 9408 | /* Bad operation parameter. */ |
| 9409 | #define ADSP_EBADPARAM 0x00000002 |
| 9410 | /* Unsupported routine or operation. */ |
| 9411 | #define ADSP_EUNSUPPORTED 0x00000003 |
| 9412 | /* Unsupported version. */ |
| 9413 | #define ADSP_EVERSION 0x00000004 |
| 9414 | /* Unexpected problem encountered. */ |
| 9415 | #define ADSP_EUNEXPECTED 0x00000005 |
| 9416 | /* Unhandled problem occurred. */ |
| 9417 | #define ADSP_EPANIC 0x00000006 |
| 9418 | /* Unable to allocate resource. */ |
| 9419 | #define ADSP_ENORESOURCE 0x00000007 |
| 9420 | /* Invalid handle. */ |
| 9421 | #define ADSP_EHANDLE 0x00000008 |
| 9422 | /* Operation is already processed. */ |
| 9423 | #define ADSP_EALREADY 0x00000009 |
| 9424 | /* Operation is not ready to be processed. */ |
| 9425 | #define ADSP_ENOTREADY 0x0000000A |
| 9426 | /* Operation is pending completion. */ |
| 9427 | #define ADSP_EPENDING 0x0000000B |
| 9428 | /* Operation could not be accepted or processed. */ |
| 9429 | #define ADSP_EBUSY 0x0000000C |
| 9430 | /* Operation aborted due to an error. */ |
| 9431 | #define ADSP_EABORTED 0x0000000D |
| 9432 | /* Operation preempted by a higher priority. */ |
| 9433 | #define ADSP_EPREEMPTED 0x0000000E |
| 9434 | /* Operation requests intervention to complete. */ |
| 9435 | #define ADSP_ECONTINUE 0x0000000F |
| 9436 | /* Operation requests immediate intervention to complete. */ |
| 9437 | #define ADSP_EIMMEDIATE 0x00000010 |
| 9438 | /* Operation is not implemented. */ |
| 9439 | #define ADSP_ENOTIMPL 0x00000011 |
| 9440 | /* Operation needs more data or resources. */ |
| 9441 | #define ADSP_ENEEDMORE 0x00000012 |
| 9442 | /* Operation does not have memory. */ |
| 9443 | #define ADSP_ENOMEMORY 0x00000014 |
| 9444 | /* Item does not exist. */ |
| 9445 | #define ADSP_ENOTEXIST 0x00000015 |
| 9446 | /* Max count for adsp error code sent to HLOS*/ |
| 9447 | #define ADSP_ERR_MAX (ADSP_ENOTEXIST + 1) |
| 9448 | /* Operation is finished. */ |
| 9449 | #define ADSP_ETERMINATED 0x00011174 |
| 9450 | |
| 9451 | /*bharath, adsp_error_codes.h */ |
| 9452 | |
| 9453 | /* LPASS clock for I2S Interface */ |
| 9454 | |
| 9455 | /* Supported OSR clock values */ |
| 9456 | #define Q6AFE_LPASS_OSR_CLK_12_P288_MHZ 0xBB8000 |
| 9457 | #define Q6AFE_LPASS_OSR_CLK_11_P2896_MHZ 0xAC4400 |
| 9458 | #define Q6AFE_LPASS_OSR_CLK_9_P600_MHZ 0x927C00 |
| 9459 | #define Q6AFE_LPASS_OSR_CLK_8_P192_MHZ 0x7D0000 |
| 9460 | #define Q6AFE_LPASS_OSR_CLK_6_P144_MHZ 0x5DC000 |
| 9461 | #define Q6AFE_LPASS_OSR_CLK_4_P096_MHZ 0x3E8000 |
| 9462 | #define Q6AFE_LPASS_OSR_CLK_3_P072_MHZ 0x2EE000 |
| 9463 | #define Q6AFE_LPASS_OSR_CLK_2_P048_MHZ 0x1F4000 |
| 9464 | #define Q6AFE_LPASS_OSR_CLK_1_P536_MHZ 0x177000 |
| 9465 | #define Q6AFE_LPASS_OSR_CLK_1_P024_MHZ 0xFA000 |
| 9466 | #define Q6AFE_LPASS_OSR_CLK_768_kHZ 0xBB800 |
| 9467 | #define Q6AFE_LPASS_OSR_CLK_512_kHZ 0x7D000 |
| 9468 | #define Q6AFE_LPASS_OSR_CLK_DISABLE 0x0 |
| 9469 | |
| 9470 | /* Supported Bit clock values */ |
| 9471 | #define Q6AFE_LPASS_IBIT_CLK_12_P288_MHZ 0xBB8000 |
| 9472 | #define Q6AFE_LPASS_IBIT_CLK_11_P2896_MHZ 0xAC4400 |
| 9473 | #define Q6AFE_LPASS_IBIT_CLK_8_P192_MHZ 0x7D0000 |
| 9474 | #define Q6AFE_LPASS_IBIT_CLK_6_P144_MHZ 0x5DC000 |
| 9475 | #define Q6AFE_LPASS_IBIT_CLK_4_P096_MHZ 0x3E8000 |
| 9476 | #define Q6AFE_LPASS_IBIT_CLK_3_P072_MHZ 0x2EE000 |
| 9477 | #define Q6AFE_LPASS_IBIT_CLK_2_P8224_MHZ 0x2b1100 |
| 9478 | #define Q6AFE_LPASS_IBIT_CLK_2_P048_MHZ 0x1F4000 |
| 9479 | #define Q6AFE_LPASS_IBIT_CLK_1_P536_MHZ 0x177000 |
| 9480 | #define Q6AFE_LPASS_IBIT_CLK_1_P4112_MHZ 0x158880 |
| 9481 | #define Q6AFE_LPASS_IBIT_CLK_1_P024_MHZ 0xFA000 |
| 9482 | #define Q6AFE_LPASS_IBIT_CLK_768_KHZ 0xBB800 |
| 9483 | #define Q6AFE_LPASS_IBIT_CLK_512_KHZ 0x7D000 |
| 9484 | #define Q6AFE_LPASS_IBIT_CLK_256_KHZ 0x3E800 |
| 9485 | #define Q6AFE_LPASS_IBIT_CLK_DISABLE 0x0 |
| 9486 | |
| 9487 | /* Supported LPASS CLK sources */ |
| 9488 | #define Q6AFE_LPASS_CLK_SRC_EXTERNAL 0 |
| 9489 | #define Q6AFE_LPASS_CLK_SRC_INTERNAL 1 |
| 9490 | |
| 9491 | /* Supported LPASS CLK root*/ |
| 9492 | #define Q6AFE_LPASS_CLK_ROOT_DEFAULT 0 |
| 9493 | |
| 9494 | enum afe_lpass_clk_mode { |
| 9495 | Q6AFE_LPASS_MODE_BOTH_INVALID, |
| 9496 | Q6AFE_LPASS_MODE_CLK1_VALID, |
| 9497 | Q6AFE_LPASS_MODE_CLK2_VALID, |
| 9498 | Q6AFE_LPASS_MODE_BOTH_VALID, |
| 9499 | } __packed; |
| 9500 | |
| 9501 | /* Clock ID Enumeration Define. */ |
| 9502 | /* Clock ID for Primary I2S IBIT */ |
| 9503 | #define Q6AFE_LPASS_CLK_ID_PRI_MI2S_IBIT 0x100 |
| 9504 | /* Clock ID for Primary I2S EBIT */ |
| 9505 | #define Q6AFE_LPASS_CLK_ID_PRI_MI2S_EBIT 0x101 |
| 9506 | /* Clock ID for Secondary I2S IBIT */ |
| 9507 | #define Q6AFE_LPASS_CLK_ID_SEC_MI2S_IBIT 0x102 |
| 9508 | /* Clock ID for Secondary I2S EBIT */ |
| 9509 | #define Q6AFE_LPASS_CLK_ID_SEC_MI2S_EBIT 0x103 |
| 9510 | /* Clock ID for Tertiary I2S IBIT */ |
| 9511 | #define Q6AFE_LPASS_CLK_ID_TER_MI2S_IBIT 0x104 |
| 9512 | /* Clock ID for Tertiary I2S EBIT */ |
| 9513 | #define Q6AFE_LPASS_CLK_ID_TER_MI2S_EBIT 0x105 |
| 9514 | /* Clock ID for Quartnery I2S IBIT */ |
| 9515 | #define Q6AFE_LPASS_CLK_ID_QUAD_MI2S_IBIT 0x106 |
| 9516 | /* Clock ID for Quartnery I2S EBIT */ |
| 9517 | #define Q6AFE_LPASS_CLK_ID_QUAD_MI2S_EBIT 0x107 |
| 9518 | /* Clock ID for Speaker I2S IBIT */ |
| 9519 | #define Q6AFE_LPASS_CLK_ID_SPEAKER_I2S_IBIT 0x108 |
| 9520 | /* Clock ID for Speaker I2S EBIT */ |
| 9521 | #define Q6AFE_LPASS_CLK_ID_SPEAKER_I2S_EBIT 0x109 |
| 9522 | /* Clock ID for Speaker I2S OSR */ |
| 9523 | #define Q6AFE_LPASS_CLK_ID_SPEAKER_I2S_OSR 0x10A |
| 9524 | |
| 9525 | /* Clock ID for QUINARY I2S IBIT */ |
| 9526 | #define Q6AFE_LPASS_CLK_ID_QUI_MI2S_IBIT 0x10B |
| 9527 | /* Clock ID for QUINARY I2S EBIT */ |
| 9528 | #define Q6AFE_LPASS_CLK_ID_QUI_MI2S_EBIT 0x10C |
| 9529 | /* Clock ID for SENARY I2S IBIT */ |
| 9530 | #define Q6AFE_LPASS_CLK_ID_SEN_MI2S_IBIT 0x10D |
| 9531 | /* Clock ID for SENARY I2S EBIT */ |
| 9532 | #define Q6AFE_LPASS_CLK_ID_SEN_MI2S_EBIT 0x10E |
| 9533 | /* Clock ID for INT0 I2S IBIT */ |
| 9534 | #define Q6AFE_LPASS_CLK_ID_INT0_MI2S_IBIT 0x10F |
| 9535 | /* Clock ID for INT1 I2S IBIT */ |
| 9536 | #define Q6AFE_LPASS_CLK_ID_INT1_MI2S_IBIT 0x110 |
| 9537 | /* Clock ID for INT2 I2S IBIT */ |
| 9538 | #define Q6AFE_LPASS_CLK_ID_INT2_MI2S_IBIT 0x111 |
| 9539 | /* Clock ID for INT3 I2S IBIT */ |
| 9540 | #define Q6AFE_LPASS_CLK_ID_INT3_MI2S_IBIT 0x112 |
| 9541 | /* Clock ID for INT4 I2S IBIT */ |
| 9542 | #define Q6AFE_LPASS_CLK_ID_INT4_MI2S_IBIT 0x113 |
| 9543 | /* Clock ID for INT5 I2S IBIT */ |
| 9544 | #define Q6AFE_LPASS_CLK_ID_INT5_MI2S_IBIT 0x114 |
| 9545 | /* Clock ID for INT6 I2S IBIT */ |
| 9546 | #define Q6AFE_LPASS_CLK_ID_INT6_MI2S_IBIT 0x115 |
| 9547 | |
| 9548 | /* Clock ID for Primary PCM IBIT */ |
| 9549 | #define Q6AFE_LPASS_CLK_ID_PRI_PCM_IBIT 0x200 |
| 9550 | /* Clock ID for Primary PCM EBIT */ |
| 9551 | #define Q6AFE_LPASS_CLK_ID_PRI_PCM_EBIT 0x201 |
| 9552 | /* Clock ID for Secondary PCM IBIT */ |
| 9553 | #define Q6AFE_LPASS_CLK_ID_SEC_PCM_IBIT 0x202 |
| 9554 | /* Clock ID for Secondary PCM EBIT */ |
| 9555 | #define Q6AFE_LPASS_CLK_ID_SEC_PCM_EBIT 0x203 |
| 9556 | /* Clock ID for Tertiary PCM IBIT */ |
| 9557 | #define Q6AFE_LPASS_CLK_ID_TER_PCM_IBIT 0x204 |
| 9558 | /* Clock ID for Tertiary PCM EBIT */ |
| 9559 | #define Q6AFE_LPASS_CLK_ID_TER_PCM_EBIT 0x205 |
| 9560 | /* Clock ID for Quartery PCM IBIT */ |
| 9561 | #define Q6AFE_LPASS_CLK_ID_QUAD_PCM_IBIT 0x206 |
| 9562 | /* Clock ID for Quartery PCM EBIT */ |
| 9563 | #define Q6AFE_LPASS_CLK_ID_QUAD_PCM_EBIT 0x207 |
| 9564 | |
| 9565 | /** Clock ID for Primary TDM IBIT */ |
| 9566 | #define Q6AFE_LPASS_CLK_ID_PRI_TDM_IBIT 0x200 |
| 9567 | /** Clock ID for Primary TDM EBIT */ |
| 9568 | #define Q6AFE_LPASS_CLK_ID_PRI_TDM_EBIT 0x201 |
| 9569 | /** Clock ID for Secondary TDM IBIT */ |
| 9570 | #define Q6AFE_LPASS_CLK_ID_SEC_TDM_IBIT 0x202 |
| 9571 | /** Clock ID for Secondary TDM EBIT */ |
| 9572 | #define Q6AFE_LPASS_CLK_ID_SEC_TDM_EBIT 0x203 |
| 9573 | /** Clock ID for Tertiary TDM IBIT */ |
| 9574 | #define Q6AFE_LPASS_CLK_ID_TER_TDM_IBIT 0x204 |
| 9575 | /** Clock ID for Tertiary TDM EBIT */ |
| 9576 | #define Q6AFE_LPASS_CLK_ID_TER_TDM_EBIT 0x205 |
| 9577 | /** Clock ID for Quartery TDM IBIT */ |
| 9578 | #define Q6AFE_LPASS_CLK_ID_QUAD_TDM_IBIT 0x206 |
| 9579 | /** Clock ID for Quartery TDM EBIT */ |
| 9580 | #define Q6AFE_LPASS_CLK_ID_QUAD_TDM_EBIT 0x207 |
| 9581 | |
| 9582 | /* Clock ID for MCLK1 */ |
| 9583 | #define Q6AFE_LPASS_CLK_ID_MCLK_1 0x300 |
| 9584 | /* Clock ID for MCLK2 */ |
| 9585 | #define Q6AFE_LPASS_CLK_ID_MCLK_2 0x301 |
| 9586 | /* Clock ID for MCLK3 */ |
| 9587 | #define Q6AFE_LPASS_CLK_ID_MCLK_3 0x302 |
| 9588 | /* Clock ID for MCLK4 */ |
| 9589 | #define Q6AFE_LPASS_CLK_ID_MCLK_4 0x304 |
| 9590 | /* Clock ID for Internal Digital Codec Core */ |
| 9591 | #define Q6AFE_LPASS_CLK_ID_INTERNAL_DIGITAL_CODEC_CORE 0x303 |
| 9592 | /* Clock ID for INT MCLK0 */ |
| 9593 | #define Q6AFE_LPASS_CLK_ID_INT_MCLK_0 0x305 |
| 9594 | /* Clock ID for INT MCLK1 */ |
| 9595 | #define Q6AFE_LPASS_CLK_ID_INT_MCLK_1 0x306 |
| 9596 | /* |
| 9597 | * Clock ID for soundwire NPL. |
| 9598 | * This is the clock to be used to enable NPL clock for internal Soundwire. |
| 9599 | */ |
| 9600 | #define AFE_CLOCK_SET_CLOCK_ID_SWR_NPL_CLK 0x307 |
| 9601 | |
| 9602 | /* Clock ID for AHB HDMI input */ |
| 9603 | #define Q6AFE_LPASS_CLK_ID_AHB_HDMI_INPUT 0x400 |
| 9604 | |
| 9605 | /* Clock ID for SPDIF core */ |
| 9606 | #define Q6AFE_LPASS_CLK_ID_SPDIF_CORE 0x500 |
| 9607 | |
| 9608 | |
| 9609 | /* Clock attribute for invalid use (reserved for internal usage) */ |
| 9610 | #define Q6AFE_LPASS_CLK_ATTRIBUTE_INVALID 0x0 |
| 9611 | /* Clock attribute for no couple case */ |
| 9612 | #define Q6AFE_LPASS_CLK_ATTRIBUTE_COUPLE_NO 0x1 |
| 9613 | /* Clock attribute for dividend couple case */ |
| 9614 | #define Q6AFE_LPASS_CLK_ATTRIBUTE_COUPLE_DIVIDEND 0x2 |
| 9615 | /* Clock attribute for divisor couple case */ |
| 9616 | #define Q6AFE_LPASS_CLK_ATTRIBUTE_COUPLE_DIVISOR 0x3 |
| 9617 | /* Clock attribute for invert and no couple case */ |
| 9618 | #define Q6AFE_LPASS_CLK_ATTRIBUTE_INVERT_COUPLE_NO 0x4 |
| 9619 | /* Clock set API version */ |
| 9620 | #define Q6AFE_LPASS_CLK_CONFIG_API_VERSION 0x1 |
| 9621 | |
| 9622 | struct afe_clk_set { |
| 9623 | /* |
| 9624 | * Minor version used for tracking clock set. |
| 9625 | * @values #AFE_API_VERSION_CLOCK_SET |
| 9626 | */ |
| 9627 | uint32_t clk_set_minor_version; |
| 9628 | |
| 9629 | /* |
| 9630 | * Clock ID |
| 9631 | * @values |
| 9632 | * - 0x100 to 0x10A - MSM8996 |
| 9633 | * - 0x200 to 0x207 - MSM8996 |
| 9634 | * - 0x300 to 0x302 - MSM8996 @tablebulletend |
| 9635 | */ |
| 9636 | uint32_t clk_id; |
| 9637 | |
| 9638 | /* |
| 9639 | * Clock frequency (in Hertz) to be set. |
| 9640 | * @values |
| 9641 | * - >= 0 for clock frequency to set @tablebulletend |
| 9642 | */ |
| 9643 | uint32_t clk_freq_in_hz; |
| 9644 | |
| 9645 | /* Use to specific divider for two clocks if needed. |
| 9646 | * Set to Q6AFE_LPASS_CLK_ATTRIBUTE_COUPLE_NO for no divider |
| 9647 | * relation clocks |
| 9648 | * @values |
| 9649 | * - #Q6AFE_LPASS_CLK_ATTRIBUTE_COUPLE_NO |
| 9650 | * - #Q6AFE_LPASS_CLK_ATTRIBUTE_COUPLE_DIVIDEND |
| 9651 | * - #Q6AFE_LPASS_CLK_ATTRIBUTE_COUPLE_DIVISOR @tablebulletend |
| 9652 | */ |
| 9653 | uint16_t clk_attri; |
| 9654 | |
| 9655 | /* |
| 9656 | * Specifies the root clock source. |
| 9657 | * Currently, only Q6AFE_LPASS_CLK_ROOT_DEFAULT is valid |
| 9658 | * @values |
| 9659 | * - 0 @tablebulletend |
| 9660 | */ |
| 9661 | uint16_t clk_root; |
| 9662 | |
| 9663 | /* |
| 9664 | * for enable and disable clock. |
| 9665 | * "clk_freq_in_hz", "clk_attri", and "clk_root" |
| 9666 | * are ignored in disable clock case. |
| 9667 | * @values |
| 9668 | * - 0 -- Disabled |
| 9669 | * - 1 -- Enabled @tablebulletend |
| 9670 | */ |
| 9671 | uint32_t enable; |
| 9672 | }; |
| 9673 | |
| 9674 | struct afe_clk_cfg { |
| 9675 | /* Minor version used for tracking the version of the I2S |
| 9676 | * configuration interface. |
| 9677 | * Supported values: #AFE_API_VERSION_I2S_CONFIG |
| 9678 | */ |
| 9679 | u32 i2s_cfg_minor_version; |
| 9680 | |
| 9681 | /* clk value 1 in MHz. */ |
| 9682 | u32 clk_val1; |
| 9683 | |
| 9684 | /* clk value 2 in MHz. */ |
| 9685 | u32 clk_val2; |
| 9686 | |
| 9687 | /* clk_src |
| 9688 | * #Q6AFE_LPASS_CLK_SRC_EXTERNAL |
| 9689 | * #Q6AFE_LPASS_CLK_SRC_INTERNAL |
| 9690 | */ |
| 9691 | |
| 9692 | u16 clk_src; |
| 9693 | |
| 9694 | /* clk_root -0 for default */ |
| 9695 | u16 clk_root; |
| 9696 | |
| 9697 | /* clk_set_mode |
| 9698 | * #Q6AFE_LPASS_MODE_BOTH_INVALID |
| 9699 | * #Q6AFE_LPASS_MODE_CLK1_VALID |
| 9700 | * #Q6AFE_LPASS_MODE_CLK2_VALID |
| 9701 | * #Q6AFE_LPASS_MODE_BOTH_VALID |
| 9702 | */ |
| 9703 | u16 clk_set_mode; |
| 9704 | |
| 9705 | /* This param id is used to configure I2S clk */ |
| 9706 | u16 reserved; |
| 9707 | } __packed; |
| 9708 | |
| 9709 | /* This param id is used to configure I2S clk */ |
| 9710 | #define AFE_PARAM_ID_LPAIF_CLK_CONFIG 0x00010238 |
| 9711 | #define AFE_MODULE_CLOCK_SET 0x0001028F |
| 9712 | #define AFE_PARAM_ID_CLOCK_SET 0x00010290 |
| 9713 | |
| 9714 | struct afe_lpass_clk_config_command { |
| 9715 | struct apr_hdr hdr; |
| 9716 | struct afe_port_cmd_set_param_v2 param; |
| 9717 | struct afe_port_param_data_v2 pdata; |
| 9718 | struct afe_clk_cfg clk_cfg; |
| 9719 | } __packed; |
| 9720 | |
| 9721 | enum afe_lpass_digital_clk_src { |
| 9722 | Q6AFE_LPASS_DIGITAL_ROOT_INVALID, |
| 9723 | Q6AFE_LPASS_DIGITAL_ROOT_PRI_MI2S_OSR, |
| 9724 | Q6AFE_LPASS_DIGITAL_ROOT_SEC_MI2S_OSR, |
| 9725 | Q6AFE_LPASS_DIGITAL_ROOT_TER_MI2S_OSR, |
| 9726 | Q6AFE_LPASS_DIGITAL_ROOT_QUAD_MI2S_OSR, |
| 9727 | Q6AFE_LPASS_DIGITAL_ROOT_CDC_ROOT_CLK, |
| 9728 | } __packed; |
| 9729 | |
| 9730 | /* This param id is used to configure internal clk */ |
| 9731 | #define AFE_PARAM_ID_INTERNAL_DIGIATL_CDC_CLK_CONFIG 0x00010239 |
| 9732 | |
| 9733 | struct afe_digital_clk_cfg { |
| 9734 | /* Minor version used for tracking the version of the I2S |
| 9735 | * configuration interface. |
| 9736 | * Supported values: #AFE_API_VERSION_I2S_CONFIG |
| 9737 | */ |
| 9738 | u32 i2s_cfg_minor_version; |
| 9739 | |
| 9740 | /* clk value in MHz. */ |
| 9741 | u32 clk_val; |
| 9742 | |
| 9743 | /* INVALID |
| 9744 | * PRI_MI2S_OSR |
| 9745 | * SEC_MI2S_OSR |
| 9746 | * TER_MI2S_OSR |
| 9747 | * QUAD_MI2S_OSR |
| 9748 | * DIGT_CDC_ROOT |
| 9749 | */ |
| 9750 | u16 clk_root; |
| 9751 | |
| 9752 | /* This field must be set to zero. */ |
| 9753 | u16 reserved; |
| 9754 | } __packed; |
| 9755 | |
| 9756 | |
| 9757 | struct afe_lpass_digital_clk_config_command { |
| 9758 | struct apr_hdr hdr; |
| 9759 | struct afe_port_cmd_set_param_v2 param; |
| 9760 | struct afe_port_param_data_v2 pdata; |
| 9761 | struct afe_digital_clk_cfg clk_cfg; |
| 9762 | } __packed; |
| 9763 | |
| 9764 | /* |
| 9765 | * Opcode for AFE to start DTMF. |
| 9766 | */ |
| 9767 | #define AFE_PORTS_CMD_DTMF_CTL 0x00010102 |
| 9768 | |
| 9769 | /** DTMF payload.*/ |
| 9770 | struct afe_dtmf_generation_command { |
| 9771 | struct apr_hdr hdr; |
| 9772 | |
| 9773 | /* |
| 9774 | * Duration of the DTMF tone in ms. |
| 9775 | * -1 -> continuous, |
| 9776 | * 0 -> disable |
| 9777 | */ |
| 9778 | int64_t duration_in_ms; |
| 9779 | |
| 9780 | /* |
| 9781 | * The DTMF high tone frequency. |
| 9782 | */ |
| 9783 | uint16_t high_freq; |
| 9784 | |
| 9785 | /* |
| 9786 | * The DTMF low tone frequency. |
| 9787 | */ |
| 9788 | uint16_t low_freq; |
| 9789 | |
| 9790 | /* |
| 9791 | * The DTMF volume setting |
| 9792 | */ |
| 9793 | uint16_t gain; |
| 9794 | |
| 9795 | /* |
| 9796 | * The number of ports to enable/disable on. |
| 9797 | */ |
| 9798 | uint16_t num_ports; |
| 9799 | |
| 9800 | /* |
| 9801 | * The Destination ports - array . |
| 9802 | * For DTMF on multiple ports, portIds needs to |
| 9803 | * be populated numPorts times. |
| 9804 | */ |
| 9805 | uint16_t port_ids; |
| 9806 | |
| 9807 | /* |
| 9808 | * variable for 32 bit alignment of APR packet. |
| 9809 | */ |
| 9810 | uint16_t reserved; |
| 9811 | } __packed; |
| 9812 | |
| 9813 | enum afe_config_type { |
| 9814 | AFE_SLIMBUS_SLAVE_PORT_CONFIG, |
| 9815 | AFE_SLIMBUS_SLAVE_CONFIG, |
| 9816 | AFE_CDC_REGISTERS_CONFIG, |
| 9817 | AFE_AANC_VERSION, |
| 9818 | AFE_CDC_CLIP_REGISTERS_CONFIG, |
| 9819 | AFE_CLIP_BANK_SEL, |
| 9820 | AFE_CDC_REGISTER_PAGE_CONFIG, |
| 9821 | AFE_MAX_CONFIG_TYPES, |
| 9822 | }; |
| 9823 | |
| 9824 | struct afe_param_slimbus_slave_port_cfg { |
| 9825 | uint32_t minor_version; |
| 9826 | uint16_t slimbus_dev_id; |
| 9827 | uint16_t slave_dev_pgd_la; |
| 9828 | uint16_t slave_dev_intfdev_la; |
| 9829 | uint16_t bit_width; |
| 9830 | uint16_t data_format; |
| 9831 | uint16_t num_channels; |
| 9832 | uint16_t slave_port_mapping[AFE_PORT_MAX_AUDIO_CHAN_CNT]; |
| 9833 | } __packed; |
| 9834 | |
| 9835 | struct afe_param_cdc_slimbus_slave_cfg { |
| 9836 | uint32_t minor_version; |
| 9837 | uint32_t device_enum_addr_lsw; |
| 9838 | uint32_t device_enum_addr_msw; |
| 9839 | uint16_t tx_slave_port_offset; |
| 9840 | uint16_t rx_slave_port_offset; |
| 9841 | } __packed; |
| 9842 | |
| 9843 | struct afe_param_cdc_reg_cfg { |
| 9844 | uint32_t minor_version; |
| 9845 | uint32_t reg_logical_addr; |
| 9846 | uint32_t reg_field_type; |
| 9847 | uint32_t reg_field_bit_mask; |
| 9848 | uint16_t reg_bit_width; |
| 9849 | uint16_t reg_offset_scale; |
| 9850 | } __packed; |
| 9851 | |
| 9852 | #define AFE_API_VERSION_CDC_REG_PAGE_CFG 1 |
| 9853 | |
| 9854 | enum { |
| 9855 | AFE_CDC_REG_PAGE_ASSIGN_PROC_ID_0 = 0, |
| 9856 | AFE_CDC_REG_PAGE_ASSIGN_PROC_ID_1, |
| 9857 | AFE_CDC_REG_PAGE_ASSIGN_PROC_ID_2, |
| 9858 | AFE_CDC_REG_PAGE_ASSIGN_PROC_ID_3, |
| 9859 | }; |
| 9860 | |
| 9861 | struct afe_param_cdc_reg_page_cfg { |
| 9862 | uint32_t minor_version; |
| 9863 | uint32_t enable; |
| 9864 | uint32_t proc_id; |
| 9865 | } __packed; |
| 9866 | |
| 9867 | struct afe_param_cdc_reg_cfg_data { |
| 9868 | uint32_t num_registers; |
| 9869 | struct afe_param_cdc_reg_cfg *reg_data; |
| 9870 | } __packed; |
| 9871 | |
| 9872 | struct afe_svc_cmd_set_param { |
| 9873 | uint32_t payload_size; |
| 9874 | uint32_t payload_address_lsw; |
| 9875 | uint32_t payload_address_msw; |
| 9876 | uint32_t mem_map_handle; |
| 9877 | } __packed; |
| 9878 | |
| 9879 | struct afe_svc_param_data { |
| 9880 | uint32_t module_id; |
| 9881 | uint32_t param_id; |
| 9882 | uint16_t param_size; |
| 9883 | uint16_t reserved; |
| 9884 | } __packed; |
| 9885 | |
| 9886 | struct afe_param_hw_mad_ctrl { |
| 9887 | uint32_t minor_version; |
| 9888 | uint16_t mad_type; |
| 9889 | uint16_t mad_enable; |
| 9890 | } __packed; |
| 9891 | |
| 9892 | struct afe_cmd_hw_mad_ctrl { |
| 9893 | struct apr_hdr hdr; |
| 9894 | struct afe_port_cmd_set_param_v2 param; |
| 9895 | struct afe_port_param_data_v2 pdata; |
| 9896 | struct afe_param_hw_mad_ctrl payload; |
| 9897 | } __packed; |
| 9898 | |
| 9899 | struct afe_cmd_hw_mad_slimbus_slave_port_cfg { |
| 9900 | struct apr_hdr hdr; |
| 9901 | struct afe_port_cmd_set_param_v2 param; |
| 9902 | struct afe_port_param_data_v2 pdata; |
| 9903 | struct afe_param_slimbus_slave_port_cfg sb_port_cfg; |
| 9904 | } __packed; |
| 9905 | |
| 9906 | struct afe_cmd_sw_mad_enable { |
| 9907 | struct apr_hdr hdr; |
| 9908 | struct afe_port_cmd_set_param_v2 param; |
| 9909 | struct afe_port_param_data_v2 pdata; |
| 9910 | } __packed; |
| 9911 | |
| 9912 | struct afe_param_cdc_reg_cfg_payload { |
| 9913 | struct afe_svc_param_data common; |
| 9914 | struct afe_param_cdc_reg_cfg reg_cfg; |
| 9915 | } __packed; |
| 9916 | |
| 9917 | struct afe_lpass_clk_config_command_v2 { |
| 9918 | struct apr_hdr hdr; |
| 9919 | struct afe_svc_cmd_set_param param; |
| 9920 | struct afe_svc_param_data pdata; |
| 9921 | struct afe_clk_set clk_cfg; |
| 9922 | } __packed; |
| 9923 | |
| 9924 | /* |
| 9925 | * reg_data's size can be up to AFE_MAX_CDC_REGISTERS_TO_CONFIG |
| 9926 | */ |
| 9927 | struct afe_svc_cmd_cdc_reg_cfg { |
| 9928 | struct apr_hdr hdr; |
| 9929 | struct afe_svc_cmd_set_param param; |
| 9930 | struct afe_param_cdc_reg_cfg_payload reg_data[0]; |
| 9931 | } __packed; |
| 9932 | |
| 9933 | struct afe_svc_cmd_init_cdc_reg_cfg { |
| 9934 | struct apr_hdr hdr; |
| 9935 | struct afe_svc_cmd_set_param param; |
| 9936 | struct afe_port_param_data_v2 init; |
| 9937 | } __packed; |
| 9938 | |
| 9939 | struct afe_svc_cmd_sb_slave_cfg { |
| 9940 | struct apr_hdr hdr; |
| 9941 | struct afe_svc_cmd_set_param param; |
| 9942 | struct afe_port_param_data_v2 pdata; |
| 9943 | struct afe_param_cdc_slimbus_slave_cfg sb_slave_cfg; |
| 9944 | } __packed; |
| 9945 | |
| 9946 | struct afe_svc_cmd_cdc_reg_page_cfg { |
| 9947 | struct apr_hdr hdr; |
| 9948 | struct afe_svc_cmd_set_param param; |
| 9949 | struct afe_port_param_data_v2 pdata; |
| 9950 | struct afe_param_cdc_reg_page_cfg cdc_reg_page_cfg; |
| 9951 | } __packed; |
| 9952 | |
| 9953 | struct afe_svc_cmd_cdc_aanc_version { |
| 9954 | struct apr_hdr hdr; |
| 9955 | struct afe_svc_cmd_set_param param; |
| 9956 | struct afe_port_param_data_v2 pdata; |
| 9957 | struct afe_param_id_cdc_aanc_version version; |
| 9958 | } __packed; |
| 9959 | |
| 9960 | struct afe_port_cmd_set_aanc_param { |
| 9961 | struct apr_hdr hdr; |
| 9962 | struct afe_port_cmd_set_param_v2 param; |
| 9963 | struct afe_port_param_data_v2 pdata; |
| 9964 | union { |
| 9965 | struct afe_param_aanc_port_cfg aanc_port_cfg; |
| 9966 | struct afe_mod_enable_param mod_enable; |
| 9967 | } __packed data; |
| 9968 | } __packed; |
| 9969 | |
| 9970 | struct afe_port_cmd_set_aanc_acdb_table { |
| 9971 | struct apr_hdr hdr; |
| 9972 | struct afe_port_cmd_set_param_v2 param; |
| 9973 | } __packed; |
| 9974 | |
| 9975 | /* Dolby DAP topology */ |
| 9976 | #define DOLBY_ADM_COPP_TOPOLOGY_ID 0x0001033B |
| 9977 | #define DS2_ADM_COPP_TOPOLOGY_ID 0x1301033B |
| 9978 | |
| 9979 | /* RMS value from DSP */ |
| 9980 | #define RMS_MODULEID_APPI_PASSTHRU 0x10009011 |
| 9981 | #define RMS_PARAM_FIRST_SAMPLE 0x10009012 |
| 9982 | #define RMS_PAYLOAD_LEN 4 |
| 9983 | |
| 9984 | /* Customized mixing in matix mixer */ |
| 9985 | #define MTMX_MODULE_ID_DEFAULT_CHMIXER 0x00010341 |
| 9986 | #define DEFAULT_CHMIXER_PARAM_ID_COEFF 0x00010342 |
| 9987 | #define CUSTOM_STEREO_PAYLOAD_SIZE 9 |
| 9988 | #define CUSTOM_STEREO_CMD_PARAM_SIZE 24 |
| 9989 | #define CUSTOM_STEREO_NUM_OUT_CH 0x0002 |
| 9990 | #define CUSTOM_STEREO_NUM_IN_CH 0x0002 |
| 9991 | #define CUSTOM_STEREO_INDEX_PARAM 0x0002 |
| 9992 | #define Q14_GAIN_ZERO_POINT_FIVE 0x2000 |
| 9993 | #define Q14_GAIN_UNITY 0x4000 |
| 9994 | |
| 9995 | struct afe_svc_cmd_set_clip_bank_selection { |
| 9996 | struct apr_hdr hdr; |
| 9997 | struct afe_svc_cmd_set_param param; |
| 9998 | struct afe_port_param_data_v2 pdata; |
| 9999 | struct afe_param_id_clip_bank_sel bank_sel; |
| 10000 | } __packed; |
| 10001 | |
| 10002 | /* Ultrasound supported formats */ |
| 10003 | #define US_POINT_EPOS_FORMAT_V2 0x0001272D |
| 10004 | #define US_RAW_FORMAT_V2 0x0001272C |
| 10005 | #define US_PROX_FORMAT_V4 0x0001273B |
| 10006 | #define US_RAW_SYNC_FORMAT 0x0001272F |
| 10007 | #define US_GES_SYNC_FORMAT 0x00012730 |
| 10008 | |
| 10009 | #define AFE_MODULE_GROUP_DEVICE 0x00010254 |
| 10010 | #define AFE_PARAM_ID_GROUP_DEVICE_CFG 0x00010255 |
| 10011 | #define AFE_PARAM_ID_GROUP_DEVICE_ENABLE 0x00010256 |
| 10012 | #define AFE_GROUP_DEVICE_ID_SECONDARY_MI2S_RX 0x1102 |
| 10013 | |
| 10014 | /* Payload of the #AFE_PARAM_ID_GROUP_DEVICE_CFG |
| 10015 | * parameter, which configures max of 8 AFE ports |
| 10016 | * into a group. |
| 10017 | * The fixed size of this structure is sixteen bytes. |
| 10018 | */ |
| 10019 | struct afe_group_device_group_cfg { |
| 10020 | u32 minor_version; |
| 10021 | u16 group_id; |
| 10022 | u16 num_channels; |
| 10023 | u16 port_id[8]; |
| 10024 | } __packed; |
| 10025 | |
| 10026 | #define AFE_GROUP_DEVICE_ID_PRIMARY_TDM_RX \ |
| 10027 | (AFE_PORT_ID_PRIMARY_TDM_RX + 0x100) |
| 10028 | #define AFE_GROUP_DEVICE_ID_PRIMARY_TDM_TX \ |
| 10029 | (AFE_PORT_ID_PRIMARY_TDM_TX + 0x100) |
| 10030 | #define AFE_GROUP_DEVICE_ID_SECONDARY_TDM_RX \ |
| 10031 | (AFE_PORT_ID_SECONDARY_TDM_RX + 0x100) |
| 10032 | #define AFE_GROUP_DEVICE_ID_SECONDARY_TDM_TX \ |
| 10033 | (AFE_PORT_ID_SECONDARY_TDM_TX + 0x100) |
| 10034 | #define AFE_GROUP_DEVICE_ID_TERTIARY_TDM_RX \ |
| 10035 | (AFE_PORT_ID_TERTIARY_TDM_RX + 0x100) |
| 10036 | #define AFE_GROUP_DEVICE_ID_TERTIARY_TDM_TX \ |
| 10037 | (AFE_PORT_ID_TERTIARY_TDM_TX + 0x100) |
| 10038 | #define AFE_GROUP_DEVICE_ID_QUATERNARY_TDM_RX \ |
| 10039 | (AFE_PORT_ID_QUATERNARY_TDM_RX + 0x100) |
| 10040 | #define AFE_GROUP_DEVICE_ID_QUATERNARY_TDM_TX \ |
| 10041 | (AFE_PORT_ID_QUATERNARY_TDM_TX + 0x100) |
| 10042 | |
| 10043 | /* ID of the parameter used by #AFE_MODULE_GROUP_DEVICE to configure the |
| 10044 | * group device. #AFE_SVC_CMD_SET_PARAM can use this parameter ID. |
| 10045 | * |
| 10046 | * Requirements: |
| 10047 | * - Configure the group before the member ports in the group are |
| 10048 | * configured and started. |
| 10049 | * - Enable the group only after it is configured. |
| 10050 | * - Stop all member ports in the group before disabling the group. |
| 10051 | */ |
| 10052 | #define AFE_PARAM_ID_GROUP_DEVICE_TDM_CONFIG 0x0001029E |
| 10053 | |
| 10054 | /* Version information used to handle future additions to |
| 10055 | * AFE_PARAM_ID_GROUP_DEVICE_TDM_CONFIG processing (for backward compatibility). |
| 10056 | */ |
| 10057 | #define AFE_API_VERSION_GROUP_DEVICE_TDM_CONFIG 0x1 |
| 10058 | |
| 10059 | /* Number of AFE ports in group device */ |
| 10060 | #define AFE_GROUP_DEVICE_NUM_PORTS 8 |
| 10061 | |
| 10062 | /* Payload of the AFE_PARAM_ID_GROUP_DEVICE_TDM_CONFIG parameter ID |
| 10063 | * used by AFE_MODULE_GROUP_DEVICE. |
| 10064 | */ |
| 10065 | struct afe_param_id_group_device_tdm_cfg { |
| 10066 | u32 group_device_cfg_minor_version; |
| 10067 | /* Minor version used to track group device configuration. |
| 10068 | * @values #AFE_API_VERSION_GROUP_DEVICE_TDM_CONFIG |
| 10069 | */ |
| 10070 | |
| 10071 | u16 group_id; |
| 10072 | /* ID for the group device. |
| 10073 | * @values |
| 10074 | * - #AFE_GROUP_DEVICE_ID_PRIMARY_TDM_RX |
| 10075 | * - #AFE_GROUP_DEVICE_ID_PRIMARY_TDM_TX |
| 10076 | * - #AFE_GROUP_DEVICE_ID_SECONDARY_TDM_RX |
| 10077 | * - #AFE_GROUP_DEVICE_ID_SECONDARY_TDM_TX |
| 10078 | * - #AFE_GROUP_DEVICE_ID_TERTIARY_TDM_RX |
| 10079 | * - #AFE_GROUP_DEVICE_ID_TERTIARY_TDM_TX |
| 10080 | * - #AFE_GROUP_DEVICE_ID_QUATERNARY_TDM_RX |
| 10081 | * - #AFE_GROUP_DEVICE_ID_QUATERNARY_TDM_TX |
| 10082 | */ |
| 10083 | |
| 10084 | u16 reserved; |
| 10085 | /* 0 */ |
| 10086 | |
| 10087 | u16 port_id[AFE_GROUP_DEVICE_NUM_PORTS]; |
| 10088 | /* Array of member port IDs of this group. |
| 10089 | * @values |
| 10090 | * - #AFE_PORT_ID_PRIMARY_TDM_RX |
| 10091 | * - #AFE_PORT_ID_PRIMARY_TDM_RX_1 |
| 10092 | * - #AFE_PORT_ID_PRIMARY_TDM_RX_2 |
| 10093 | * - #AFE_PORT_ID_PRIMARY_TDM_RX_3 |
| 10094 | * - #AFE_PORT_ID_PRIMARY_TDM_RX_4 |
| 10095 | * - #AFE_PORT_ID_PRIMARY_TDM_RX_5 |
| 10096 | * - #AFE_PORT_ID_PRIMARY_TDM_RX_6 |
| 10097 | * - #AFE_PORT_ID_PRIMARY_TDM_RX_7 |
| 10098 | |
| 10099 | * - #AFE_PORT_ID_PRIMARY_TDM_TX |
| 10100 | * - #AFE_PORT_ID_PRIMARY_TDM_TX_1 |
| 10101 | * - #AFE_PORT_ID_PRIMARY_TDM_TX_2 |
| 10102 | * - #AFE_PORT_ID_PRIMARY_TDM_TX_3 |
| 10103 | * - #AFE_PORT_ID_PRIMARY_TDM_TX_4 |
| 10104 | * - #AFE_PORT_ID_PRIMARY_TDM_TX_5 |
| 10105 | * - #AFE_PORT_ID_PRIMARY_TDM_TX_6 |
| 10106 | * - #AFE_PORT_ID_PRIMARY_TDM_TX_7 |
| 10107 | |
| 10108 | * - #AFE_PORT_ID_SECONDARY_TDM_RX |
| 10109 | * - #AFE_PORT_ID_SECONDARY_TDM_RX_1 |
| 10110 | * - #AFE_PORT_ID_SECONDARY_TDM_RX_2 |
| 10111 | * - #AFE_PORT_ID_SECONDARY_TDM_RX_3 |
| 10112 | * - #AFE_PORT_ID_SECONDARY_TDM_RX_4 |
| 10113 | * - #AFE_PORT_ID_SECONDARY_TDM_RX_5 |
| 10114 | * - #AFE_PORT_ID_SECONDARY_TDM_RX_6 |
| 10115 | * - #AFE_PORT_ID_SECONDARY_TDM_RX_7 |
| 10116 | |
| 10117 | * - #AFE_PORT_ID_SECONDARY_TDM_TX |
| 10118 | * - #AFE_PORT_ID_SECONDARY_TDM_TX_1 |
| 10119 | * - #AFE_PORT_ID_SECONDARY_TDM_TX_2 |
| 10120 | * - #AFE_PORT_ID_SECONDARY_TDM_TX_3 |
| 10121 | * - #AFE_PORT_ID_SECONDARY_TDM_TX_4 |
| 10122 | * - #AFE_PORT_ID_SECONDARY_TDM_TX_5 |
| 10123 | * - #AFE_PORT_ID_SECONDARY_TDM_TX_6 |
| 10124 | * - #AFE_PORT_ID_SECONDARY_TDM_TX_7 |
| 10125 | |
| 10126 | * - #AFE_PORT_ID_TERTIARY_TDM_RX |
| 10127 | * - #AFE_PORT_ID_TERTIARY_TDM_RX_1 |
| 10128 | * - #AFE_PORT_ID_TERTIARY_TDM_RX_2 |
| 10129 | * - #AFE_PORT_ID_TERTIARY_TDM_RX_3 |
| 10130 | * - #AFE_PORT_ID_TERTIARY_TDM_RX_4 |
| 10131 | * - #AFE_PORT_ID_TERTIARY_TDM_RX_5 |
| 10132 | * - #AFE_PORT_ID_TERTIARY_TDM_RX_6 |
| 10133 | * - #AFE_PORT_ID_TERTIARY_TDM_RX_7 |
| 10134 | |
| 10135 | * - #AFE_PORT_ID_TERTIARY_TDM_TX |
| 10136 | * - #AFE_PORT_ID_TERTIARY_TDM_TX_1 |
| 10137 | * - #AFE_PORT_ID_TERTIARY_TDM_TX_2 |
| 10138 | * - #AFE_PORT_ID_TERTIARY_TDM_TX_3 |
| 10139 | * - #AFE_PORT_ID_TERTIARY_TDM_TX_4 |
| 10140 | * - #AFE_PORT_ID_TERTIARY_TDM_TX_5 |
| 10141 | * - #AFE_PORT_ID_TERTIARY_TDM_TX_6 |
| 10142 | * - #AFE_PORT_ID_TERTIARY_TDM_TX_7 |
| 10143 | |
| 10144 | * - #AFE_PORT_ID_QUATERNARY_TDM_RX |
| 10145 | * - #AFE_PORT_ID_QUATERNARY_TDM_RX_1 |
| 10146 | * - #AFE_PORT_ID_QUATERNARY_TDM_RX_2 |
| 10147 | * - #AFE_PORT_ID_QUATERNARY_TDM_RX_3 |
| 10148 | * - #AFE_PORT_ID_QUATERNARY_TDM_RX_4 |
| 10149 | * - #AFE_PORT_ID_QUATERNARY_TDM_RX_5 |
| 10150 | * - #AFE_PORT_ID_QUATERNARY_TDM_RX_6 |
| 10151 | * - #AFE_PORT_ID_QUATERNARY_TDM_RX_7 |
| 10152 | |
| 10153 | * - #AFE_PORT_ID_QUATERNARY_TDM_TX |
| 10154 | * - #AFE_PORT_ID_QUATERNARY_TDM_TX_1 |
| 10155 | * - #AFE_PORT_ID_QUATERNARY_TDM_TX_2 |
| 10156 | * - #AFE_PORT_ID_QUATERNARY_TDM_TX_3 |
| 10157 | * - #AFE_PORT_ID_QUATERNARY_TDM_TX_4 |
| 10158 | * - #AFE_PORT_ID_QUATERNARY_TDM_TX_5 |
| 10159 | * - #AFE_PORT_ID_QUATERNARY_TDM_TX_6 |
| 10160 | * - #AFE_PORT_ID_QUATERNARY_TDM_TX_7 |
| 10161 | * @tablebulletend |
| 10162 | */ |
| 10163 | |
| 10164 | u32 num_channels; |
| 10165 | /* Number of enabled slots for TDM frame. |
| 10166 | * @values 1 to 8 |
| 10167 | */ |
| 10168 | |
| 10169 | u32 sample_rate; |
| 10170 | /* Sampling rate of the port. |
| 10171 | * @values |
| 10172 | * - #AFE_PORT_SAMPLE_RATE_8K |
| 10173 | * - #AFE_PORT_SAMPLE_RATE_16K |
| 10174 | * - #AFE_PORT_SAMPLE_RATE_24K |
| 10175 | * - #AFE_PORT_SAMPLE_RATE_32K |
| 10176 | * - #AFE_PORT_SAMPLE_RATE_48K @tablebulletend |
| 10177 | */ |
| 10178 | |
| 10179 | u32 bit_width; |
| 10180 | /* Bit width of the sample. |
| 10181 | * @values 16, 24, (32) |
| 10182 | */ |
| 10183 | |
| 10184 | u16 nslots_per_frame; |
| 10185 | /* Number of slots per frame. Typical : 1, 2, 4, 8, 16, 32. |
| 10186 | * @values 1 - 32 |
| 10187 | */ |
| 10188 | |
| 10189 | u16 slot_width; |
| 10190 | /* Slot width of the slot in a TDM frame. (slot_width >= bit_width) |
| 10191 | * have to be satisfied. |
| 10192 | * @values 16, 24, 32 |
| 10193 | */ |
| 10194 | |
| 10195 | u32 slot_mask; |
| 10196 | /* Position of active slots. When that bit is set, that paricular |
| 10197 | * slot is active. |
| 10198 | * Number of active slots can be inferred by number of bits set in |
| 10199 | * the mask. Only 8 individual bits can be enabled. |
| 10200 | * Bits 0..31 corresponding to slot 0..31 |
| 10201 | * @values 1 to 2^32 -1 |
| 10202 | */ |
| 10203 | } __packed; |
| 10204 | |
| 10205 | /* Payload of the #AFE_PARAM_ID_GROUP_DEVICE_ENABLE |
| 10206 | * parameter, which enables or |
| 10207 | * disables any module. |
| 10208 | * The fixed size of this structure is four bytes. |
| 10209 | */ |
| 10210 | |
| 10211 | struct afe_group_device_enable { |
| 10212 | u16 group_id; |
| 10213 | /* valid value is AFE_GROUP_DEVICE_ID_SECONDARY_MI2S_RX */ |
| 10214 | u16 enable; |
| 10215 | /* Enables (1) or disables (0) the module. */ |
| 10216 | } __packed; |
| 10217 | |
| 10218 | union afe_port_group_config { |
| 10219 | struct afe_group_device_group_cfg group_cfg; |
| 10220 | struct afe_group_device_enable group_enable; |
| 10221 | struct afe_param_id_group_device_tdm_cfg tdm_cfg; |
| 10222 | } __packed; |
| 10223 | |
| 10224 | struct afe_port_group_create { |
| 10225 | struct apr_hdr hdr; |
| 10226 | struct afe_svc_cmd_set_param param; |
| 10227 | struct afe_port_param_data_v2 pdata; |
| 10228 | union afe_port_group_config data; |
| 10229 | } __packed; |
| 10230 | |
| 10231 | /* ID of the parameter used by #AFE_MODULE_AUDIO_DEV_INTERFACE to specify |
| 10232 | * the timing statistics of the corresponding device interface. |
| 10233 | * Client can periodically query for the device time statistics to help adjust |
| 10234 | * the PLL based on the drift value. The get param command must be sent to |
| 10235 | * AFE port ID corresponding to device interface |
| 10236 | |
| 10237 | * This parameter ID supports following get param commands: |
| 10238 | * #AFE_PORT_CMD_GET_PARAM_V2 and |
| 10239 | * #AFE_PORT_CMD_GET_PARAM_V3. |
| 10240 | */ |
| 10241 | #define AFE_PARAM_ID_DEV_TIMING_STATS 0x000102AD |
| 10242 | |
| 10243 | /* Version information used to handle future additions to AFE device |
| 10244 | * interface timing statistics (for backward compatibility). |
| 10245 | */ |
| 10246 | #define AFE_API_VERSION_DEV_TIMING_STATS 0x1 |
| 10247 | |
| 10248 | /* Enumeration for specifying a sink(Rx) device */ |
| 10249 | #define AFE_SINK_DEVICE 0x0 |
| 10250 | |
| 10251 | /* Enumeration for specifying a source(Tx) device */ |
| 10252 | #define AFE_SOURCE_DEVICE 0x1 |
| 10253 | |
| 10254 | /* Enumeration for specifying the drift reference is of type AV Timer */ |
| 10255 | #define AFE_REF_TIMER_TYPE_AVTIMER 0x0 |
| 10256 | |
| 10257 | /* Message payload structure for the |
| 10258 | * AFE_PARAM_ID_DEV_TIMING_STATS parameter. |
| 10259 | */ |
| 10260 | struct afe_param_id_dev_timing_stats { |
| 10261 | /* Minor version used to track the version of device interface timing |
| 10262 | * statistics. Currently, the supported version is 1. |
| 10263 | * @values #AFE_API_VERSION_DEV_TIMING_STATS |
| 10264 | */ |
| 10265 | u32 minor_version; |
| 10266 | |
| 10267 | /* Indicates the device interface direction as either |
| 10268 | * source (Tx) or sink (Rx). |
| 10269 | * @values |
| 10270 | * #AFE_SINK_DEVICE |
| 10271 | * #AFE_SOURCE_DEVICE |
| 10272 | */ |
| 10273 | u16 device_direction; |
| 10274 | |
| 10275 | /* Reference timer for drift accumulation and time stamp information. |
| 10276 | * @values |
| 10277 | * #AFE_REF_TIMER_TYPE_AVTIMER @tablebulletend |
| 10278 | */ |
| 10279 | u16 reference_timer; |
| 10280 | |
| 10281 | /* |
| 10282 | * Flag to indicate if resync is required on the client side for |
| 10283 | * drift correction. Flag is set to TRUE for the first get_param |
| 10284 | * response after device interface starts. This flag value can be |
| 10285 | * used by client to identify if device interface restart has |
| 10286 | * happened and if any re-sync is required at their end for drift |
| 10287 | * correction. |
| 10288 | * @values |
| 10289 | * 0: FALSE (Resync not required) |
| 10290 | * 1: TRUE (Resync required) @tablebulletend |
| 10291 | */ |
| 10292 | u32 resync_flag; |
| 10293 | |
| 10294 | /* Accumulated drift value in microseconds. This value is updated |
| 10295 | * every 100th ms. |
| 10296 | * Positive drift value indicates AV timer is running faster than device |
| 10297 | * Negative drift value indicates AV timer is running slower than device |
| 10298 | * @values Any valid int32 number |
| 10299 | */ |
| 10300 | s32 acc_drift_value; |
| 10301 | |
| 10302 | /* Lower 32 bits of the 64-bit absolute timestamp of reference |
| 10303 | * timer in microseconds. |
| 10304 | |
| 10305 | * This timestamp corresponds to the time when the drift values |
| 10306 | * are accumlated for every 100th ms. |
| 10307 | * @values Any valid uint32 number |
| 10308 | */ |
| 10309 | u32 ref_timer_abs_ts_lsw; |
| 10310 | |
| 10311 | /* Upper 32 bits of the 64-bit absolute timestamp of reference |
| 10312 | * timer in microseconds. |
| 10313 | * This timestamp corresponds to the time when the drift values |
| 10314 | * are accumlated for every 100th ms. |
| 10315 | * @values Any valid uint32 number |
| 10316 | */ |
| 10317 | u32 ref_timer_abs_ts_msw; |
| 10318 | } __packed; |
| 10319 | |
| 10320 | struct afe_av_dev_drift_get_param { |
| 10321 | struct apr_hdr hdr; |
| 10322 | struct afe_port_cmd_get_param_v2 get_param; |
| 10323 | struct afe_port_param_data_v2 pdata; |
| 10324 | struct afe_param_id_dev_timing_stats timing_stats; |
| 10325 | } __packed; |
| 10326 | |
| 10327 | struct afe_av_dev_drift_get_param_resp { |
| 10328 | uint32_t status; |
| 10329 | struct afe_port_param_data_v2 pdata; |
| 10330 | struct afe_param_id_dev_timing_stats timing_stats; |
| 10331 | } __packed; |
| 10332 | |
| 10333 | /* Command for Matrix or Stream Router */ |
| 10334 | #define ASM_SESSION_CMD_SET_MTMX_STRTR_PARAMS_V2 0x00010DCE |
| 10335 | /* Module for AVSYNC */ |
| 10336 | #define ASM_SESSION_MTMX_STRTR_MODULE_ID_AVSYNC 0x00010DC6 |
| 10337 | |
| 10338 | /* Parameter used by #ASM_SESSION_MTMX_STRTR_MODULE_ID_AVSYNC to specify the |
| 10339 | * render window start value. This parameter is supported only for a Set |
| 10340 | * command (not a Get command) in the Rx direction |
| 10341 | * (#ASM_SESSION_CMD_SET_MTMX_STRTR_PARAMS_V2). |
| 10342 | * Render window start is a value (session time minus timestamp, or ST-TS) |
| 10343 | * below which frames are held, and after which frames are immediately |
| 10344 | * rendered. |
| 10345 | */ |
| 10346 | #define ASM_SESSION_MTMX_STRTR_PARAM_RENDER_WINDOW_START_V2 0x00010DD1 |
| 10347 | |
| 10348 | /* Parameter used by #ASM_SESSION_MTMX_STRTR_MODULE_ID_AVSYNC to specify the |
| 10349 | * render window end value. This parameter is supported only for a Set |
| 10350 | * command (not a Get command) in the Rx direction |
| 10351 | * (#ASM_SESSION_CMD_SET_MTMX_STRTR_PARAMS_V2). Render window end is a value |
| 10352 | * (session time minus timestamp) above which frames are dropped, and below |
| 10353 | * which frames are immediately rendered. |
| 10354 | */ |
| 10355 | #define ASM_SESSION_MTMX_STRTR_PARAM_RENDER_WINDOW_END_V2 0x00010DD2 |
| 10356 | |
| 10357 | /* Generic payload of the window parameters in the |
| 10358 | * #ASM_SESSION_MTMX_STRTR_MODULE_ID_AVSYNC module. |
| 10359 | * This payload is supported only for a Set command |
| 10360 | * (not a Get command) on the Rx path. |
| 10361 | */ |
| 10362 | struct asm_session_mtmx_strtr_param_window_v2_t { |
| 10363 | u32 window_lsw; |
| 10364 | /* Lower 32 bits of the render window start value. */ |
| 10365 | |
| 10366 | u32 window_msw; |
| 10367 | /* Upper 32 bits of the render window start value. |
| 10368 | * |
| 10369 | * The 64-bit number formed by window_lsw and window_msw specifies a |
| 10370 | * signed 64-bit window value in microseconds. The sign extension is |
| 10371 | * necessary. This value is used by the following parameter IDs: |
| 10372 | * #ASM_SESSION_MTMX_STRTR_PARAM_RENDER_WINDOW_START_V2 |
| 10373 | * #ASM_SESSION_MTMX_STRTR_PARAM_RENDER_WINDOW_END_V2 |
| 10374 | * #ASM_SESSION_MTMX_STRTR_PARAM_STAT_WINDOW_START_V2 |
| 10375 | * #ASM_SESSION_MTMX_STRTR_PARAM_STAT_WINDOW_END_V2 |
| 10376 | * The value depends on which parameter ID is used. |
| 10377 | * The aDSP honors the windows at a granularity of 1 ms. |
| 10378 | */ |
| 10379 | }; |
| 10380 | |
| 10381 | struct asm_session_cmd_set_mtmx_strstr_params_v2 { |
| 10382 | uint32_t data_payload_addr_lsw; |
| 10383 | /* Lower 32 bits of the 64-bit data payload address. */ |
| 10384 | |
| 10385 | uint32_t data_payload_addr_msw; |
| 10386 | /* Upper 32 bits of the 64-bit data payload address. |
| 10387 | * If the address is not sent (NULL), the message is in the payload. |
| 10388 | * If the address is sent (non-NULL), the parameter data payloads |
| 10389 | * begin at the specified address. |
| 10390 | */ |
| 10391 | |
| 10392 | uint32_t mem_map_handle; |
| 10393 | /* Unique identifier for an address. This memory map handle is returned |
| 10394 | * by the aDSP through the #ASM_CMD_SHARED_MEM_MAP_REGIONS command. |
| 10395 | * values |
| 10396 | * - NULL -- Parameter data payloads are within the message payload |
| 10397 | * (in-band). |
| 10398 | * - Non-NULL -- Parameter data payloads begin at the address specified |
| 10399 | * in the data_payload_addr_lsw and data_payload_addr_msw fields |
| 10400 | * (out-of-band). |
| 10401 | */ |
| 10402 | |
| 10403 | uint32_t data_payload_size; |
| 10404 | /* Actual size of the variable payload accompanying the message, or in |
| 10405 | * shared memory. This field is used for parsing the parameter payload. |
| 10406 | * values > 0 bytes |
| 10407 | */ |
| 10408 | |
| 10409 | uint32_t direction; |
| 10410 | /* Direction of the entity (matrix mixer or stream router) on which |
| 10411 | * the parameter is to be set. |
| 10412 | * values |
| 10413 | * - 0 -- Rx (for Rx stream router or Rx matrix mixer) |
| 10414 | * - 1 -- Tx (for Tx stream router or Tx matrix mixer) |
| 10415 | */ |
| 10416 | }; |
| 10417 | |
| 10418 | /* Parameter used by #ASM_SESSION_MTMX_STRTR_MODULE_ID_AVSYNC which allows the |
| 10419 | * audio client choose the rendering decision that the audio DSP should use. |
| 10420 | */ |
| 10421 | #define ASM_SESSION_MTMX_STRTR_PARAM_RENDER_MODE_CMD 0x00012F0D |
| 10422 | |
| 10423 | /* Indicates that rendering decision will be based on default rate |
| 10424 | * (session clock based rendering, device driven). |
| 10425 | * 1. The default session clock based rendering is inherently driven |
| 10426 | * by the timing of the device. |
| 10427 | * 2. After the initial decision is made (first buffer after a run |
| 10428 | * command), subsequent data rendering decisions are made with |
| 10429 | * respect to the rate at which the device is rendering, thus deriving |
| 10430 | * its timing from the device. |
| 10431 | * 3. While this decision making is simple, it has some inherent limitations |
| 10432 | * (mentioned in the next section). |
| 10433 | * 4. If this API is not set, the session clock based rendering will be assumed |
| 10434 | * and this will ensure that the DSP is backward compatible. |
| 10435 | */ |
| 10436 | #define ASM_SESSION_MTMX_STRTR_PARAM_RENDER_DEFAULT 0 |
| 10437 | |
| 10438 | /* Indicates that rendering decision will be based on local clock rate. |
| 10439 | * 1. In the DSP loopback/client loopback use cases (frame based |
| 10440 | * inputs), the incoming data into audio DSP is time-stamped at the |
| 10441 | * local clock rate (STC). |
| 10442 | * 2. This TS rate may match the incoming data rate or maybe different |
| 10443 | * from the incoming data rate. |
| 10444 | * 3. Regardless, the data will be time-stamped with local STC and |
| 10445 | * therefore, the client is recommended to set this mode for these |
| 10446 | * use cases. This method is inherently more robust to sequencing |
| 10447 | * (AFE Start/Stop) and device switches, among other benefits. |
| 10448 | * 4. This API will inform the DSP to compare every incoming buffer TS |
| 10449 | * against local STC. |
| 10450 | * 5. DSP will continue to honor render windows APIs, as before. |
| 10451 | */ |
| 10452 | #define ASM_SESSION_MTMX_STRTR_PARAM_RENDER_LOCAL_STC 1 |
| 10453 | |
| 10454 | /* Structure for rendering decision parameter */ |
| 10455 | struct asm_session_mtmx_strtr_param_render_mode_t { |
| 10456 | /* Specifies the type of rendering decision the audio DSP should use. |
| 10457 | * |
| 10458 | * @values |
| 10459 | * - #ASM_SESSION_MTMX_STRTR_PARAM_RENDER_DEFAULT |
| 10460 | * - #ASM_SESSION_MTMX_STRTR_PARAM_RENDER_LOCAL_STC |
| 10461 | */ |
| 10462 | u32 flags; |
| 10463 | } __packed; |
| 10464 | |
| 10465 | /* Parameter used by #ASM_SESSION_MTMX_STRTR_MODULE_ID_AVSYNC which allows the |
| 10466 | * audio client to specify the clock recovery mechanism that the audio DSP |
| 10467 | * should use. |
| 10468 | */ |
| 10469 | |
| 10470 | #define ASM_SESSION_MTMX_STRTR_PARAM_CLK_REC_CMD 0x00012F0E |
| 10471 | |
| 10472 | /* Indicates that default clock recovery will be used (no clock recovery). |
| 10473 | * If the client wishes that no clock recovery be done, the client can |
| 10474 | * choose this. This means that no attempt will made by the DSP to try and |
| 10475 | * match the rates of the input and output audio. |
| 10476 | */ |
| 10477 | #define ASM_SESSION_MTMX_STRTR_PARAM_CLK_REC_NONE 0 |
| 10478 | |
| 10479 | /* Indicates that independent clock recovery needs to be used. |
| 10480 | * 1. In the DSP loopback/client loopback use cases (frame based inputs), |
| 10481 | * the client should choose the independent clock recovery option. |
| 10482 | * 2. This basically de-couples the audio and video from knowing each others |
| 10483 | * clock sources and lets the audio DSP independently rate match the input |
| 10484 | * and output rates. |
| 10485 | * 3. After drift detection, the drift correction is achieved by either pulling |
| 10486 | * the PLLs (if applicable) or by stream to device rate matching |
| 10487 | * (for PCM use cases) by comparing drift with respect to STC. |
| 10488 | * 4. For passthrough use cases, since the PLL pulling is the only option, |
| 10489 | * a best effort will be made. |
| 10490 | * If PLL pulling is not possible / available, the rendering will be |
| 10491 | * done without rate matching. |
| 10492 | */ |
| 10493 | #define ASM_SESSION_MTMX_STRTR_PARAM_CLK_REC_AUTO 1 |
| 10494 | |
| 10495 | /* Payload of the #ASM_SESSION_MTMX_STRTR_PARAM_CLK_REC parameter. |
| 10496 | */ |
| 10497 | struct asm_session_mtmx_strtr_param_clk_rec_t { |
| 10498 | /* Specifies the type of clock recovery that the audio DSP should |
| 10499 | * use for rate matching. |
| 10500 | */ |
| 10501 | |
| 10502 | /* @values |
| 10503 | * #ASM_SESSION_MTMX_STRTR_PARAM_CLK_REC_DEFAULT |
| 10504 | * #ASM_SESSION_MTMX_STRTR_PARAM_CLK_REC_INDEPENDENT |
| 10505 | */ |
| 10506 | u32 flags; |
| 10507 | } __packed; |
| 10508 | |
| 10509 | |
| 10510 | /* Parameter used by #ASM_SESSION_MTMX_STRTR_MODULE_ID_AVSYNC to |
| 10511 | * realize smoother adjustment of audio session clock for a specified session. |
| 10512 | * The desired audio session clock adjustment(in micro seconds) is specified |
| 10513 | * using the command #ASM_SESSION_CMD_ADJUST_SESSION_CLOCK_V2. |
| 10514 | * Delaying/Advancing the session clock would be implemented by inserting |
| 10515 | * interpolated/dropping audio samples in the playback path respectively. |
| 10516 | * Also, this parameter has to be configured before the Audio Session is put |
| 10517 | * to RUN state to avoid cold start latency/glitches in the playback. |
| 10518 | */ |
| 10519 | |
| 10520 | #define ASM_SESSION_MTMX_PARAM_ADJUST_SESSION_TIME_CTL 0x00013217 |
| 10521 | |
| 10522 | struct asm_session_mtmx_param_adjust_session_time_ctl_t { |
| 10523 | /* Specifies whether the module is enabled or not |
| 10524 | * @values |
| 10525 | * 0 -- disabled |
| 10526 | * 1 -- enabled |
| 10527 | */ |
| 10528 | u32 enable; |
| 10529 | }; |
| 10530 | |
| 10531 | union asm_session_mtmx_strtr_param_config { |
| 10532 | struct asm_session_mtmx_strtr_param_window_v2_t window_param; |
| 10533 | struct asm_session_mtmx_strtr_param_render_mode_t render_param; |
| 10534 | struct asm_session_mtmx_strtr_param_clk_rec_t clk_rec_param; |
| 10535 | struct asm_session_mtmx_param_adjust_session_time_ctl_t adj_time_param; |
| 10536 | } __packed; |
| 10537 | |
| 10538 | struct asm_mtmx_strtr_params { |
| 10539 | struct apr_hdr hdr; |
| 10540 | struct asm_session_cmd_set_mtmx_strstr_params_v2 param; |
| 10541 | struct asm_stream_param_data_v2 data; |
| 10542 | union asm_session_mtmx_strtr_param_config config; |
| 10543 | } __packed; |
| 10544 | |
| 10545 | #define ASM_SESSION_CMD_GET_MTMX_STRTR_PARAMS_V2 0x00010DCF |
| 10546 | #define ASM_SESSION_CMDRSP_GET_MTMX_STRTR_PARAMS_V2 0x00010DD0 |
| 10547 | |
| 10548 | #define ASM_SESSION_MTMX_STRTR_PARAM_SESSION_TIME_V3 0x00012F0B |
| 10549 | #define ASM_SESSION_MTMX_STRTR_PARAM_STIME_TSTMP_FLG_BMASK (0x80000000UL) |
| 10550 | |
| 10551 | struct asm_session_cmd_get_mtmx_strstr_params_v2 { |
| 10552 | uint32_t data_payload_addr_lsw; |
| 10553 | /* Lower 32 bits of the 64-bit data payload address. */ |
| 10554 | |
| 10555 | uint32_t data_payload_addr_msw; |
| 10556 | /* |
| 10557 | * Upper 32 bits of the 64-bit data payload address. |
| 10558 | * If the address is not sent (NULL), the message is in the payload. |
| 10559 | * If the address is sent (non-NULL), the parameter data payloads |
| 10560 | * begin at the specified address. |
| 10561 | */ |
| 10562 | |
| 10563 | uint32_t mem_map_handle; |
| 10564 | /* |
| 10565 | * Unique identifier for an address. This memory map handle is returned |
| 10566 | * by the aDSP through the #ASM_CMD_SHARED_MEM_MAP_REGIONS command. |
| 10567 | * values |
| 10568 | * - NULL -- Parameter data payloads are within the message payload |
| 10569 | * (in-band). |
| 10570 | * - Non-NULL -- Parameter data payloads begin at the address specified |
| 10571 | * in the data_payload_addr_lsw and data_payload_addr_msw fields |
| 10572 | * (out-of-band). |
| 10573 | */ |
| 10574 | uint32_t direction; |
| 10575 | /* |
| 10576 | * Direction of the entity (matrix mixer or stream router) on which |
| 10577 | * the parameter is to be set. |
| 10578 | * values |
| 10579 | * - 0 -- Rx (for Rx stream router or Rx matrix mixer) |
| 10580 | * - 1 -- Tx (for Tx stream router or Tx matrix mixer) |
| 10581 | */ |
| 10582 | uint32_t module_id; |
| 10583 | /* Unique module ID. */ |
| 10584 | |
| 10585 | uint32_t param_id; |
| 10586 | /* Unique parameter ID. */ |
| 10587 | |
| 10588 | uint32_t param_max_size; |
| 10589 | }; |
| 10590 | |
| 10591 | struct asm_session_mtmx_strtr_param_session_time_v3_t { |
| 10592 | uint32_t session_time_lsw; |
| 10593 | /* Lower 32 bits of the current session time in microseconds */ |
| 10594 | |
| 10595 | uint32_t session_time_msw; |
| 10596 | /* |
| 10597 | * Upper 32 bits of the current session time in microseconds. |
| 10598 | * The 64-bit number formed by session_time_lsw and session_time_msw |
| 10599 | * is treated as signed. |
| 10600 | */ |
| 10601 | |
| 10602 | uint32_t absolute_time_lsw; |
| 10603 | /* |
| 10604 | * Lower 32 bits of the 64-bit absolute time in microseconds. |
| 10605 | * This is the time when the sample corresponding to the |
| 10606 | * session_time_lsw is rendered to the hardware. This absolute |
| 10607 | * time can be slightly in the future or past. |
| 10608 | */ |
| 10609 | |
| 10610 | uint32_t absolute_time_msw; |
| 10611 | /* |
| 10612 | * Upper 32 bits of the 64-bit absolute time in microseconds. |
| 10613 | * This is the time when the sample corresponding to the |
| 10614 | * session_time_msw is rendered to hardware. This absolute |
| 10615 | * time can be slightly in the future or past. The 64-bit number |
| 10616 | * formed by absolute_time_lsw and absolute_time_msw is treated as |
| 10617 | * unsigned. |
| 10618 | */ |
| 10619 | |
| 10620 | uint32_t time_stamp_lsw; |
| 10621 | /* Lower 32 bits of the last processed timestamp in microseconds */ |
| 10622 | |
| 10623 | uint32_t time_stamp_msw; |
| 10624 | /* |
| 10625 | * Upper 32 bits of the last processed timestamp in microseconds. |
| 10626 | * The 64-bit number formed by time_stamp_lsw and time_stamp_lsw |
| 10627 | * is treated as unsigned. |
| 10628 | */ |
| 10629 | |
| 10630 | uint32_t flags; |
| 10631 | /* |
| 10632 | * Keeps track of any additional flags needed. |
| 10633 | * @values{for bit 31} |
| 10634 | * - 0 -- Uninitialized/invalid |
| 10635 | * - 1 -- Valid |
| 10636 | * All other bits are reserved; clients must set them to zero. |
| 10637 | */ |
| 10638 | }; |
| 10639 | |
| 10640 | union asm_session_mtmx_strtr_data_type { |
| 10641 | struct asm_session_mtmx_strtr_param_session_time_v3_t session_time; |
| 10642 | }; |
| 10643 | |
| 10644 | struct asm_mtmx_strtr_get_params { |
| 10645 | struct apr_hdr hdr; |
| 10646 | struct asm_session_cmd_get_mtmx_strstr_params_v2 param_info; |
| 10647 | } __packed; |
| 10648 | |
| 10649 | struct asm_mtmx_strtr_get_params_cmdrsp { |
| 10650 | uint32_t err_code; |
| 10651 | struct asm_stream_param_data_v2 param_info; |
| 10652 | union asm_session_mtmx_strtr_data_type param_data; |
| 10653 | } __packed; |
| 10654 | |
| 10655 | #define AUDPROC_MODULE_ID_RESAMPLER 0x00010719 |
| 10656 | |
| 10657 | enum { |
| 10658 | LEGACY_PCM = 0, |
| 10659 | COMPRESSED_PASSTHROUGH, |
| 10660 | COMPRESSED_PASSTHROUGH_CONVERT, |
| 10661 | COMPRESSED_PASSTHROUGH_DSD, |
| 10662 | LISTEN, |
| 10663 | COMPRESSED_PASSTHROUGH_GEN, |
| 10664 | COMPRESSED_PASSTHROUGH_IEC61937 |
| 10665 | }; |
| 10666 | |
| 10667 | #define AUDPROC_MODULE_ID_COMPRESSED_MUTE 0x00010770 |
| 10668 | #define AUDPROC_PARAM_ID_COMPRESSED_MUTE 0x00010771 |
| 10669 | |
| 10670 | struct adm_set_compressed_device_mute { |
| 10671 | struct adm_cmd_set_pp_params_v5 command; |
| 10672 | struct adm_param_data_v5 params; |
| 10673 | u32 mute_on; |
| 10674 | } __packed; |
| 10675 | |
| 10676 | #define AUDPROC_MODULE_ID_COMPRESSED_LATENCY 0x0001076E |
| 10677 | #define AUDPROC_PARAM_ID_COMPRESSED_LATENCY 0x0001076F |
| 10678 | |
| 10679 | struct adm_set_compressed_device_latency { |
| 10680 | struct adm_cmd_set_pp_params_v5 command; |
| 10681 | struct adm_param_data_v5 params; |
| 10682 | u32 latency; |
| 10683 | } __packed; |
| 10684 | |
| 10685 | #define VOICEPROC_MODULE_ID_GENERIC_TX 0x00010EF6 |
| 10686 | #define VOICEPROC_PARAM_ID_FLUENCE_SOUNDFOCUS 0x00010E37 |
| 10687 | #define VOICEPROC_PARAM_ID_FLUENCE_SOURCETRACKING 0x00010E38 |
| 10688 | #define MAX_SECTORS 8 |
| 10689 | #define MAX_NOISE_SOURCE_INDICATORS 3 |
| 10690 | #define MAX_POLAR_ACTIVITY_INDICATORS 360 |
| 10691 | |
| 10692 | struct sound_focus_param { |
| 10693 | uint16_t start_angle[MAX_SECTORS]; |
| 10694 | uint8_t enable[MAX_SECTORS]; |
| 10695 | uint16_t gain_step; |
| 10696 | } __packed; |
| 10697 | |
| 10698 | struct source_tracking_param { |
| 10699 | uint8_t vad[MAX_SECTORS]; |
| 10700 | uint16_t doa_speech; |
| 10701 | uint16_t doa_noise[MAX_NOISE_SOURCE_INDICATORS]; |
| 10702 | uint8_t polar_activity[MAX_POLAR_ACTIVITY_INDICATORS]; |
| 10703 | } __packed; |
| 10704 | |
| 10705 | struct adm_param_fluence_soundfocus_t { |
| 10706 | uint16_t start_angles[MAX_SECTORS]; |
| 10707 | uint8_t enables[MAX_SECTORS]; |
| 10708 | uint16_t gain_step; |
| 10709 | uint16_t reserved; |
| 10710 | } __packed; |
| 10711 | |
| 10712 | struct adm_set_fluence_soundfocus_param { |
| 10713 | struct adm_cmd_set_pp_params_v5 params; |
| 10714 | struct adm_param_data_v5 data; |
| 10715 | struct adm_param_fluence_soundfocus_t soundfocus_data; |
| 10716 | } __packed; |
| 10717 | |
| 10718 | struct adm_param_fluence_sourcetracking_t { |
| 10719 | uint8_t vad[MAX_SECTORS]; |
| 10720 | uint16_t doa_speech; |
| 10721 | uint16_t doa_noise[MAX_NOISE_SOURCE_INDICATORS]; |
| 10722 | uint8_t polar_activity[MAX_POLAR_ACTIVITY_INDICATORS]; |
| 10723 | } __packed; |
| 10724 | |
| 10725 | #define AUDPROC_MODULE_ID_AUDIOSPHERE 0x00010916 |
| 10726 | #define AUDPROC_PARAM_ID_AUDIOSPHERE_ENABLE 0x00010917 |
| 10727 | #define AUDPROC_PARAM_ID_AUDIOSPHERE_STRENGTH 0x00010918 |
| 10728 | #define AUDPROC_PARAM_ID_AUDIOSPHERE_CONFIG_MODE 0x00010919 |
| 10729 | |
| 10730 | #define AUDPROC_PARAM_ID_AUDIOSPHERE_COEFFS_STEREO_INPUT 0x0001091A |
| 10731 | #define AUDPROC_PARAM_ID_AUDIOSPHERE_COEFFS_MULTICHANNEL_INPUT 0x0001091B |
| 10732 | #define AUDPROC_PARAM_ID_AUDIOSPHERE_DESIGN_STEREO_INPUT 0x0001091C |
| 10733 | #define AUDPROC_PARAM_ID_AUDIOSPHERE_DESIGN_MULTICHANNEL_INPUT 0x0001091D |
| 10734 | |
| 10735 | #define AUDPROC_PARAM_ID_AUDIOSPHERE_OPERATING_INPUT_MEDIA_INFO 0x0001091E |
| 10736 | |
| 10737 | #define AUDPROC_MODULE_ID_VOICE_TX_SECNS 0x10027059 |
| 10738 | #define AUDPROC_PARAM_IDX_SEC_PRIMARY_MIC_CH 0x10014444 |
| 10739 | |
| 10740 | struct admx_sec_primary_mic_ch { |
| 10741 | uint16_t version; |
| 10742 | uint16_t reserved; |
| 10743 | uint16_t sec_primary_mic_ch; |
| 10744 | uint16_t reserved1; |
| 10745 | } __packed; |
| 10746 | |
| 10747 | |
| 10748 | struct adm_set_sec_primary_ch_params { |
| 10749 | struct adm_cmd_set_pp_params_v5 params; |
| 10750 | struct adm_param_data_v5 data; |
| 10751 | struct admx_sec_primary_mic_ch sec_primary_mic_ch_data; |
| 10752 | } __packed; |
| 10753 | #endif /*_APR_AUDIO_V2_H_ */ |