asoc/Kbuild

# We can build either as part of a standalone Kernel build or as
# an external module.  Determine which mechanism is being used
ifeq ($(MODNAME),)
	KERNEL_BUILD := 1
else
	KERNEL_BUILD := 0
endif

ifeq ($(KERNEL_BUILD), 1)
	# These are configurable via Kconfig for kernel-based builds
	# Need to explicitly configure for Android-based builds
	AUDIO_BLD_DIR := $(shell pwd)/kernel/msm-4.19
	AUDIO_ROOT := $(AUDIO_BLD_DIR)/techpack/audio
endif

ifeq ($(KERNEL_BUILD), 0)
	ifeq ($(CONFIG_ARCH_SM8150), y)
		ifdef CONFIG_SND_SOC_SA8155
			include $(AUDIO_ROOT)/config/sa8155auto.conf
			export
			INCS    +=  -include $(AUDIO_ROOT)/config/sa8155autoconf.h
		else
			include $(AUDIO_ROOT)/config/sm8150auto.conf
			export
			INCS    +=  -include $(AUDIO_ROOT)/config/sm8150autoconf.h
		endif
	endif
	ifeq ($(CONFIG_ARCH_SM6150), y)
		ifdef CONFIG_SND_SOC_SA6155
			include $(AUDIO_ROOT)/config/sa6155auto.conf
			export
			INCS    +=  -include $(AUDIO_ROOT)/config/sa6155autoconf.h
		else
			include $(AUDIO_ROOT)/config/sm6150auto.conf
			export
			INCS    +=  -include $(AUDIO_ROOT)/config/sm6150autoconf.h
		endif
	endif
	ifeq ($(CONFIG_ARCH_TRINKET), y)
		include $(AUDIO_ROOT)/config/sm6150auto.conf
		export
		INCS    +=  -include $(AUDIO_ROOT)/config/sm6150autoconf.h
	endif
	ifeq ($(CONFIG_ARCH_KONA), y)
		include $(AUDIO_ROOT)/config/konaauto.conf
		INCS    +=  -include $(AUDIO_ROOT)/config/konaautoconf.h
	endif
	ifeq ($(CONFIG_ARCH_LITO), y)
		include $(AUDIO_ROOT)/config/litoauto.conf
		export
		INCS    +=  -include $(AUDIO_ROOT)/config/litoautoconf.h
	endif
	ifeq ($(CONFIG_ARCH_SDMSHRIKE), y)
		ifdef CONFIG_SND_SOC_SA8155
			include $(AUDIO_ROOT)/config/sa8155auto.conf
			export
			INCS    +=  -include $(AUDIO_ROOT)/config/sa8155autoconf.h
		else
			include $(AUDIO_ROOT)/config/sm8150auto.conf
			export
			INCS    +=  -include $(AUDIO_ROOT)/config/sm8150autoconf.h
		endif
	endif
	ifeq ($(CONFIG_ARCH_QCS405), y)
		include $(AUDIO_ROOT)/config/qcs405auto.conf
		export
		INCS    +=  -include $(AUDIO_ROOT)/config/qcs405autoconf.h
	endif
	ifeq ($(CONFIG_QTI_GVM), y)
		include $(AUDIO_ROOT)/config/gvmauto.conf
		export
		INCS    +=  -include $(AUDIO_ROOT)/config/gvmautoconf.h
	endif
endif

# As per target team, build is done as follows:
# Defconfig : build with default flags
# Slub      : defconfig  + CONFIG_SLUB_DEBUG := y +
#	      CONFIG_SLUB_DEBUG_ON := y + CONFIG_PAGE_POISONING := y
# Perf      : Using appropriate msmXXXX-perf_defconfig
#
# Shipment builds (user variants) should not have any debug feature
# enabled. This is identified using 'TARGET_BUILD_VARIANT'. Slub builds
# are identified using the CONFIG_SLUB_DEBUG_ON configuration. Since
# there is no other way to identify defconfig builds, QTI internal
# representation of perf builds (identified using the string 'perf'),
# is used to identify if the build is a slub or defconfig one. This
# way no critical debug feature will be enabled for perf and shipment
# builds. Other OEMs are also protected using the TARGET_BUILD_VARIANT
# config.

############ UAPI ############
UAPI_DIR :=	uapi
UAPI_INC :=	-I$(AUDIO_ROOT)/include/$(UAPI_DIR)

############ COMMON ############
COMMON_DIR :=	include
COMMON_INC :=	-I$(AUDIO_ROOT)/$(COMMON_DIR)

############ ASoC Drivers ############

# for SM8150 sound card driver
ifdef CONFIG_SND_SOC_SM8150
	MACHINE_OBJS += sm8150.o
	MACHINE_OBJS += machine_815x_init.o
endif

# for SM6150 sound card driver
ifdef CONFIG_SND_SOC_SM6150
	MACHINE_OBJS += sm6150.o
	MACHINE_OBJS += machine_615x_init.o
endif

# For sa6155 sound card driver
ifdef CONFIG_SND_SOC_SA6155
	MACHINE_OBJS += sa6155.o
endif

# for qcs405 sound card driver
ifdef CONFIG_SND_SOC_QCS405
	MACHINE_OBJS += qcs405.o
endif

# for KONA sound card driver
ifdef CONFIG_SND_SOC_KONA
	MACHINE_OBJS += kona.o
endif

ifdef CONFIG_SND_SOC_LITO
	MACHINE_OBJS += kona.o
endif

# for sa8155 sound card driver
ifdef CONFIG_SND_SOC_SA8155
	MACHINE_OBJS += sa8155.o
endif

ifdef CONFIG_SND_SOC_CPE
	CPE_LSM_OBJS += msm-cpe-lsm.o
endif

ifdef CONFIG_SND_SOC_QDSP6V2
	PLATFORM_OBJS += msm-audio-effects-q6-v2.o
	PLATFORM_OBJS += msm-compress-q6-v2.o
	PLATFORM_OBJS += msm-dai-fe.o
	PLATFORM_OBJS += msm-dai-q6-hdmi-v2.o
	PLATFORM_OBJS += msm-dai-q6-v2.o
	PLATFORM_OBJS += msm-dai-stub-v2.o
	PLATFORM_OBJS += msm-lsm-client.o
	PLATFORM_OBJS += msm-pcm-afe-v2.o
	PLATFORM_OBJS += msm-pcm-dtmf-v2.o
	PLATFORM_OBJS += msm-pcm-hostless.o
	PLATFORM_OBJS += msm-pcm-host-voice-v2.o
	PLATFORM_OBJS += msm-pcm-loopback-v2.o
	PLATFORM_OBJS += msm-pcm-q6-noirq.o
	PLATFORM_OBJS += msm-pcm-q6-v2.o
	PLATFORM_OBJS += msm-pcm-routing-v2.o
	PLATFORM_OBJS += msm-pcm-voice-v2.o
	PLATFORM_OBJS += msm-pcm-voip-v2.o
	PLATFORM_OBJS += msm-transcode-loopback-q6-v2.o
	PLATFORM_OBJS += platform_init.o
endif
ifdef CONFIG_WCD9XXX_CODEC_CORE
	PLATFORM_OBJS += msm-dai-slim.o
endif
ifdef CONFIG_DOLBY_DS2
	PLATFORM_OBJS += msm-ds2-dap-config.o
endif
ifdef CONFIG_DOLBY_LICENSE
	PLATFORM_OBJS += msm-ds2-dap-config.o
endif
ifdef CONFIG_SND_HWDEP_ROUTING
	PLATFORM_OBJS += msm-pcm-routing-devdep.o
endif
ifdef CONFIG_QTI_PP
	PLATFORM_OBJS += msm-qti-pp-config.o
endif

LINUX_INC +=	-Iinclude/linux

INCS +=		$(COMMON_INC) \
		$(UAPI_INC)

EXTRA_CFLAGS += $(INCS)

CDEFINES +=	-DANI_LITTLE_BYTE_ENDIAN \
		-DANI_LITTLE_BIT_ENDIAN \
		-DDOT11F_LITTLE_ENDIAN_HOST \
		-DANI_COMPILER_TYPE_GCC \
		-DANI_OS_TYPE_ANDROID=6 \
		-DPTT_SOCK_SVC_ENABLE \
		-Wall\
		-Werror\
		-D__linux__

KBUILD_CPPFLAGS += $(CDEFINES)

# Currently, for versions of gcc which support it, the kernel Makefile
# is disabling the maybe-uninitialized warning.  Re-enable it for the
# AUDIO driver.  Note that we must use EXTRA_CFLAGS here so that it
# will override the kernel settings.
ifeq ($(call cc-option-yn, -Wmaybe-uninitialized),y)
EXTRA_CFLAGS += -Wmaybe-uninitialized
endif
#EXTRA_CFLAGS += -Wmissing-prototypes

ifeq ($(call cc-option-yn, -Wheader-guard),y)
EXTRA_CFLAGS += -Wheader-guard
endif

ifeq ($(KERNEL_BUILD), 0)
KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/dsp/Module.symvers
KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/asoc/codecs/Module.symvers
KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/asoc/codecs/wcd934x/Module.symvers
KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/asoc/codecs/wcd937x/Module.symvers
endif
ifeq ($(KERNEL_BUILD), 1)
	obj-y += codecs/
endif
# Module information used by KBuild framework
obj-$(CONFIG_SND_SOC_QDSP6V2) += platform_dlkm.o
platform_dlkm-y := $(PLATFORM_OBJS)

obj-$(CONFIG_SND_SOC_SM8150) += machine_dlkm.o
machine_dlkm-y := $(MACHINE_OBJS)

obj-$(CONFIG_SND_SOC_SM6150) += machine_dlkm.o
machine_dlkm-y := $(MACHINE_OBJS)

obj-$(CONFIG_SND_SOC_SA6155) += machine_dlkm.o
machine_dlkm-y := $(MACHINE_OBJS)

obj-$(CONFIG_SND_SOC_QCS405) += machine_dlkm.o
machine_dlkm-y := $(MACHINE_OBJS)

obj-$(CONFIG_SND_SOC_KONA) += machine_dlkm.o
machine_dlkm-y := $(MACHINE_OBJS)

obj-$(CONFIG_SND_SOC_LITO) += machine_dlkm.o
machine_dlkm-y := $(MACHINE_OBJS)

obj-$(CONFIG_SND_SOC_SA8155) += machine_dlkm.o
machine_dlkm-y := $(MACHINE_OBJS)

obj-$(CONFIG_SND_SOC_CPE) += cpe_lsm_dlkm.o
cpe_lsm_dlkm-y := $(CPE_LSM_OBJS)

# inject some build related information
DEFINES += -DBUILD_TIMESTAMP=\"$(shell date -u +'%Y-%m-%dT%H:%M:%SZ')\"