dsp/Kbuild

# We can build either as part of a standalone Kernel build or as
# an external module.  Determine which mechanism is being used
ifeq ($(MODNAME), )
	KERNEL_BUILD := 1
else
	KERNEL_BUILD := 0
endif

ifeq ($(KERNEL_BUILD), 1)
	# These are configurable via Kconfig for kernel-based builds
	# Need to explicitly configure for Android-based builds
	AUDIO_BLD_DIR := $(shell pwd)/kernel/msm-4.19
	AUDIO_ROOT := $(AUDIO_BLD_DIR)/techpack/audio
endif

ifeq ($(KERNEL_BUILD), 0)
	ifeq ($(CONFIG_ARCH_SM6150), y)
		ifdef CONFIG_SND_SOC_SA6155
			include $(AUDIO_ROOT)/config/sa6155auto.conf
			export
			INCS    +=  -include $(AUDIO_ROOT)/config/sa6155autoconf.h
		else
			include $(AUDIO_ROOT)/config/sm6150auto.conf
			export
			INCS    +=  -include $(AUDIO_ROOT)/config/sm6150autoconf.h
		endif
	endif
	ifeq ($(CONFIG_ARCH_TRINKET), y)
		include $(AUDIO_ROOT)/config/sm6150auto.conf
		export
		INCS    +=  -include $(AUDIO_ROOT)/config/sm6150autoconf.h
	endif
	ifeq ($(CONFIG_ARCH_KONA), y)
		include $(AUDIO_ROOT)/config/konaauto.conf
		INCS    +=  -include $(AUDIO_ROOT)/config/konaautoconf.h
	endif
	ifeq ($(CONFIG_ARCH_LITO), y)
		include $(AUDIO_ROOT)/config/litoauto.conf
		export
		INCS    +=  -include $(AUDIO_ROOT)/config/litoautoconf.h
	endif
	ifeq ($(CONFIG_ARCH_SM8150), y)
		ifdef CONFIG_SND_SOC_SA8155
			include $(AUDIO_ROOT)/config/sa8155auto.conf
			export
			INCS    +=  -include $(AUDIO_ROOT)/config/sa8155autoconf.h
		else
			include $(AUDIO_ROOT)/config/sm8150auto.conf
			export
			INCS    +=  -include $(AUDIO_ROOT)/config/sm8150autoconf.h
		endif
	endif
	ifeq ($(CONFIG_ARCH_SDMSHRIKE), y)
		include $(AUDIO_ROOT)/config/sm8150auto.conf
		export
		INCS    +=  -include $(AUDIO_ROOT)/config/sm8150autoconf.h
	endif
	ifeq ($(CONFIG_ARCH_QCS405), y)
		include $(AUDIO_ROOT)/config/qcs405auto.conf
		export
		INCS    +=  -include $(AUDIO_ROOT)/config/qcs405autoconf.h
	endif
	ifeq ($(CONFIG_QTI_GVM), y)
		include $(AUDIO_ROOT)/config/gvmauto.conf
		export
		INCS    +=  -include $(AUDIO_ROOT)/config/gvmautoconf.h
	endif
endif



# As per target team, build is done as follows:
# Defconfig : build with default flags
# Slub      : defconfig  + CONFIG_SLUB_DEBUG := y +
#	      CONFIG_SLUB_DEBUG_ON := y + CONFIG_PAGE_POISONING := y
# Perf      : Using appropriate msmXXXX-perf_defconfig
#
# Shipment builds (user variants) should not have any debug feature
# enabled. This is identified using 'TARGET_BUILD_VARIANT'. Slub builds
# are identified using the CONFIG_SLUB_DEBUG_ON configuration. Since
# there is no other way to identify defconfig builds, QTI internal
# representation of perf builds (identified using the string 'perf'),
# is used to identify if the build is a slub or defconfig one. This
# way no critical debug feature will be enabled for perf and shipment
# builds. Other OEMs are also protected using the TARGET_BUILD_VARIANT
# config.

############ UAPI ############
UAPI_DIR :=	uapi
UAPI_INC :=	-I$(AUDIO_ROOT)/include/$(UAPI_DIR)

############ COMMON ############
COMMON_DIR :=	include
COMMON_INC :=	-I$(AUDIO_ROOT)/$(COMMON_DIR)

############ QDSP6V2 ############

ifdef CONFIG_SND_SOC_MSM_QDSP6V2_INTF
	Q6_OBJS += msm-audio-event-notify.o
	Q6_OBJS += audio_calibration.o
	Q6_OBJS += audio_cal_utils.o
	Q6_OBJS += q6adm.o
	Q6_OBJS += q6afe.o
	Q6_OBJS += q6asm.o
	Q6_OBJS += q6audio-v2.o
	Q6_OBJS += q6voice.o
	Q6_OBJS += q6core.o
	Q6_OBJS += q6common.o
	Q6_OBJS += rtac.o
	Q6_OBJS += q6lsm.o
	Q6_OBJS += adsp_err.o
	Q6_OBJS += msm_audio_ion.o
	Q6_OBJS += avtimer.o
	Q6_OBJS += q6_init.o
endif

ifdef CONFIG_SND_SOC_MSM_QDSP6V2_VM
	Q6_OBJS += msm-audio-event-notify.o
	Q6_OBJS += audio_calibration.o
	Q6_OBJS += audio_cal_utils.o
	Q6_OBJS += q6adm.o
	Q6_OBJS += q6afe.o
	Q6_OBJS += q6asm.o
	Q6_OBJS += q6audio-v2.o
	Q6_OBJS += q6voice.o
	Q6_OBJS += q6core.o
	Q6_OBJS += q6common.o
	Q6_OBJS += rtac.o
	Q6_OBJS += q6lsm.o
	Q6_OBJS += adsp_err.o
	Q6_OBJS += msm_audio_ion_vm.o
	Q6_OBJS += avtimer.o
	Q6_OBJS += q6_init.o
endif

ifdef CONFIG_XT_LOGGING
	Q6_OBJS += sp_params.o
endif

ifdef CONFIG_WCD9XXX_CODEC_CORE
	Q6_OBJS += audio_slimslave.o
endif

ifdef CONFIG_DTS_SRS_TM
	Q6_OBJS += msm-dts-srs-tm-config.o
endif

ifdef CONFIG_AFE_HWDEP
	Q6_OBJS += q6afecal-hwdep.o
endif

ifdef CONFIG_MSM_ADSP_LOADER
ADSP_LOADER_OBJS += adsp-loader.o
endif

ifdef CONFIG_MSM_QDSP6_PDR
QDSP6_PDR_OBJS += audio_pdr.o
endif

ifdef CONFIG_MSM_QDSP6_NOTIFIER
QDSP6_NOTIFIER_OBJS += audio_notifier.o audio_ssr.o
endif

ifdef CONFIG_MSM_ULTRASOUND
USF_OBJS += usf.o usfcdev.o q6usm.o
endif

ifdef CONFIG_MSM_MDF
	Q6_OBJS += msm_mdf.o
endif

ifdef CONFIG_VOICE_MHI
	Q6_OBJS += voice_mhi.o
endif

LINUX_INC +=	-Iinclude/linux

INCS +=		$(COMMON_INC) \
		$(UAPI_INC)

EXTRA_CFLAGS += $(INCS)


CDEFINES +=	-DANI_LITTLE_BYTE_ENDIAN \
		-DANI_LITTLE_BIT_ENDIAN \
		-DDOT11F_LITTLE_ENDIAN_HOST \
		-DANI_COMPILER_TYPE_GCC \
		-DANI_OS_TYPE_ANDROID=6 \
		-DPTT_SOCK_SVC_ENABLE \
		-Wall\
		-Werror\
		-D__linux__

KBUILD_CPPFLAGS += $(CDEFINES)

# Currently, for versions of gcc which support it, the kernel Makefile
# is disabling the maybe-uninitialized warning.  Re-enable it for the
# AUDIO driver.  Note that we must use EXTRA_CFLAGS here so that it
# will override the kernel settings.
ifeq ($(call cc-option-yn, -Wmaybe-uninitialized),y)
EXTRA_CFLAGS += -Wmaybe-uninitialized
endif
#EXTRA_CFLAGS += -Wmissing-prototypes

ifeq ($(call cc-option-yn, -Wheader-guard),y)
EXTRA_CFLAGS += -Wheader-guard
endif

# If the module name is not "wlan", then the define MULTI_IF_NAME to be the
# same a the QCA CHIP name. The host driver will then append MULTI_IF_NAME to
# any string that must be unique for all instances of the driver on the system.
# This allows multiple instances of the driver with different module names.
# If the module name is wlan, leave MULTI_IF_NAME undefined and the code will
# treat the driver as the primary driver.
ifneq ($(MODNAME), qdsp6v2)
CHIP_NAME ?= $(MODNAME)
CDEFINES += -DMULTI_IF_NAME=\"$(CHIP_NAME)\"
endif

ifeq ($(KERNEL_BUILD), 0)
KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/ipc/Module.symvers
endif

ifeq ($(KERNEL_BUILD), 1)
	obj-y += codecs/
endif

obj-$(CONFIG_SND_SOC_MSM_QDSP6V2_INTF) += q6_dlkm.o
q6_dlkm-y := $(Q6_OBJS)

obj-$(CONFIG_SND_SOC_MSM_QDSP6V2_VM) += q6_dlkm.o
q6_dlkm-y := $(Q6_OBJS)

obj-$(CONFIG_MSM_ULTRASOUND) += usf_dlkm.o
usf_dlkm-y := $(USF_OBJS)

obj-$(CONFIG_MSM_ADSP_LOADER) += adsp_loader_dlkm.o
adsp_loader_dlkm-y := $(ADSP_LOADER_OBJS)

obj-$(CONFIG_MSM_QDSP6_PDR) += q6_pdr_dlkm.o
q6_pdr_dlkm-y := $(QDSP6_PDR_OBJS)

obj-$(CONFIG_MSM_QDSP6_NOTIFIER) += q6_notifier_dlkm.o
q6_notifier_dlkm-y := $(QDSP6_NOTIFIER_OBJS)

# inject some build related information
DEFINES += -DBUILD_TIMESTAMP=\"$(shell date -u +'%Y-%m-%dT%H:%M:%SZ')\"