/*
 * Copyright (c) 2012, The Linux Foundation. All rights reserved.
 *
 * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
 *
 *
 * Permission to use, copy, modify, and/or distribute this software for
 * any purpose with or without fee is hereby granted, provided that the
 * above copyright notice and this permission notice appear in all
 * copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
 * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
 * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
 * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
 * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 * PERFORMANCE OF THIS SOFTWARE.
 */

/**========================================================================

  \file  wlan_hdd_p2p.c

  \brief WLAN Host Device Driver implementation for P2P commands interface

  Copyright 2008 (c) Qualcomm, Incorporated.  All Rights Reserved.

  Qualcomm Confidential and Proprietary.

  ========================================================================*/
#ifdef CONFIG_CFG80211

#include <wlan_hdd_includes.h>
#include <wlan_hdd_hostapd.h>
#include <net/cfg80211.h>
#include "sme_Api.h"
#include "wlan_hdd_p2p.h"
#include "sapApi.h"

#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <net/ieee80211_radiotap.h>

#ifdef WLAN_FEATURE_P2P_DEBUG
#define MAX_P2P_ACTION_FRAME_TYPE 9
const char *p2p_action_frame_type[]={"GO Negotiation Request",
                                     "GO Negotiation Response",
                                     "GO Negotiation Confirmation",
                                     "P2P Invitation Request",
                                     "P2P Invitation Response",
                                     "Device Discoverability Request",
                                     "Device Discoverability Response",
                                     "Provision Discovery Request",
                                     "Provision Discovery Response"};

/* We no need to protect this variable since
 * there is no chance of race to condition
 * and also not make any complicating the code
 * just for debugging log
 */
tP2PConnectionStatus globalP2PConnectionStatus = P2P_NOT_ACTIVE;

#endif

extern struct net_device_ops net_ops_struct;

static int hdd_wlan_add_rx_radiotap_hdr( struct sk_buff *skb,
                                         int rtap_len, int flag );

static void hdd_wlan_tx_complete( hdd_adapter_t* pAdapter,
                                  hdd_cfg80211_state_t* cfgState,
                                  tANI_BOOLEAN actionSendSuccess );

static void hdd_sendMgmtFrameOverMonitorIface( hdd_adapter_t *pMonAdapter,
                                               tANI_U32 nFrameLength, 
                                               tANI_U8* pbFrames,
                                               tANI_U8 frameType );

#ifdef WLAN_FEATURE_P2P
eHalStatus wlan_hdd_remain_on_channel_callback( tHalHandle hHal, void* pCtx,
                                                eHalStatus status )
{
    hdd_adapter_t *pAdapter = (hdd_adapter_t*) pCtx;
    hdd_cfg80211_state_t *cfgState = WLAN_HDD_GET_CFG_STATE_PTR( pAdapter );
    hdd_remain_on_chan_ctx_t *pRemainChanCtx = cfgState->remain_on_chan_ctx;

    if( pRemainChanCtx == NULL )
    {
       hddLog( LOGW,
          "%s: No Rem on channel pending for which Rsp is received", __func__);
       return eHAL_STATUS_SUCCESS;
    }

    hddLog( LOG1, "Received remain on channel rsp");

    cfgState->remain_on_chan_ctx = NULL;

    if( REMAIN_ON_CHANNEL_REQUEST == pRemainChanCtx->rem_on_chan_request )
    {
        if( cfgState->buf )
        {
           hddLog( LOGP, 
                   "%s: We need to receive yet an ack from one of tx packet",
                   __func__);
        }
        cfg80211_remain_on_channel_expired( pRemainChanCtx->dev,
                              pRemainChanCtx->cookie,
                              &pRemainChanCtx->chan,
                              pRemainChanCtx->chan_type, GFP_KERNEL );
    }

    vos_mem_free( pRemainChanCtx );

    if ( ( WLAN_HDD_INFRA_STATION == pAdapter->device_mode ) ||
         ( WLAN_HDD_P2P_CLIENT == pAdapter->device_mode ) ||
         ( WLAN_HDD_P2P_DEVICE == pAdapter->device_mode )
       )
    {
        tANI_U8 sessionId = pAdapter->sessionId;
        sme_DeregisterMgmtFrame(
                   hHal, sessionId,
                   (SIR_MAC_MGMT_FRAME << 2) | ( SIR_MAC_MGMT_PROBE_REQ << 4),
                    NULL, 0 );
    }
    else if ( ( WLAN_HDD_SOFTAP== pAdapter->device_mode ) ||
              ( WLAN_HDD_P2P_GO == pAdapter->device_mode )
            )
    {
        WLANSAP_DeRegisterMgmtFrame(
                (WLAN_HDD_GET_CTX(pAdapter))->pvosContext,
                (SIR_MAC_MGMT_FRAME << 2) | ( SIR_MAC_MGMT_PROBE_REQ << 4),
                NULL, 0 );
    }

    complete(&pAdapter->cancel_rem_on_chan_var);
    return eHAL_STATUS_SUCCESS;
}

static void wlan_hdd_cancel_existing_remain_on_channel(hdd_adapter_t *pAdapter)
{
    hdd_cfg80211_state_t *cfgState = WLAN_HDD_GET_CFG_STATE_PTR( pAdapter );
    int status = 0;

    if(cfgState->remain_on_chan_ctx != NULL)
    {
        hddLog( LOG1, "Cancel Existing Remain on Channel");

        /* Wait till remain on channel ready indication before issuing cancel 
         * remain on channel request, otherwise if remain on channel not 
         * received and if the driver issues cancel remain on channel then lim 
         * will be in unknown state.
         */
        status = wait_for_completion_interruptible_timeout(&pAdapter->rem_on_chan_ready_event,
               msecs_to_jiffies(WAIT_REM_CHAN_READY));
        if (!status)
        {
            hddLog( LOGE, 
                    "%s: timeout waiting for remain on channel ready indication",
                    __func__);
        }

        INIT_COMPLETION(pAdapter->cancel_rem_on_chan_var);
        
        /* Issue abort remain on chan request to sme.
         * The remain on channel callback will make sure the remain_on_chan
         * expired event is sent.
        */
        if ( ( WLAN_HDD_INFRA_STATION == pAdapter->device_mode ) ||
             ( WLAN_HDD_P2P_CLIENT == pAdapter->device_mode ) ||
             ( WLAN_HDD_P2P_DEVICE == pAdapter->device_mode )
           )
        {
            sme_CancelRemainOnChannel( WLAN_HDD_GET_HAL_CTX( pAdapter ),
                                                     pAdapter->sessionId );
        }
        else if ( (WLAN_HDD_SOFTAP== pAdapter->device_mode) ||
                  (WLAN_HDD_P2P_GO == pAdapter->device_mode)
                )
        {
            WLANSAP_CancelRemainOnChannel(
                                     (WLAN_HDD_GET_CTX(pAdapter))->pvosContext);
        }

        status = wait_for_completion_interruptible_timeout(&pAdapter->cancel_rem_on_chan_var,
               msecs_to_jiffies(WAIT_CANCEL_REM_CHAN));

        if (!status)
        {
            hddLog( LOGE, 
                    "%s: timeout waiting for cancel remain on channel ready indication",
                    __func__);
        }
    }
}

int wlan_hdd_check_remain_on_channel(hdd_adapter_t *pAdapter)
{
   int status = 0;
   hdd_cfg80211_state_t *cfgState = WLAN_HDD_GET_CFG_STATE_PTR( pAdapter );

   if(WLAN_HDD_P2P_GO != pAdapter->device_mode)
   {
     //Cancel Existing Remain On Channel
     //If no action frame is pending
     if( cfgState->remain_on_chan_ctx != NULL)
     {
        //Check whether Action Frame is pending or not
        if( cfgState->buf == NULL)
        {
           wlan_hdd_cancel_existing_remain_on_channel(pAdapter);
        }
        else
        {
           hddLog( LOG1, "Cannot Cancel Existing Remain on Channel");
           status = -EBUSY;
        }
     }
   }
   return status;
}

static int wlan_hdd_request_remain_on_channel( struct wiphy *wiphy,
                                   struct net_device *dev,
                                   struct ieee80211_channel *chan,
                                   enum nl80211_channel_type channel_type,
                                   unsigned int duration, u64 *cookie,
                                   rem_on_channel_request_type_t request_type )
{
    hdd_adapter_t *pAdapter = WLAN_HDD_GET_PRIV_PTR(dev);
    hdd_remain_on_chan_ctx_t *pRemainChanCtx;
    hdd_cfg80211_state_t *cfgState = WLAN_HDD_GET_CFG_STATE_PTR( pAdapter );
    hddLog(VOS_TRACE_LEVEL_INFO, "%s: device_mode = %d",
                                 __func__,pAdapter->device_mode);

    hddLog( LOG1,
        "chan(hw_val)0x%x chan(centerfreq) %d chan type 0x%x, duration %d",
        chan->hw_value, chan->center_freq, channel_type, duration );

    //Cancel existing remain On Channel if any
    wlan_hdd_cancel_existing_remain_on_channel(pAdapter);

    /* When P2P-GO and if we are trying to unload the driver then
     * wlan driver is keep on receiving the remain on channel command
     * and which is resulting in crash. So not allowing any remain on
     * channel requets when Load/Unload is in progress*/
    if (((hdd_context_t*)pAdapter->pHddCtx)->isLoadUnloadInProgress)
    {
        hddLog( LOGE,
                "%s: Wlan Load/Unload is in progress", __func__);
        return -EBUSY;
    }

    if (((hdd_context_t*)pAdapter->pHddCtx)->isLogpInProgress)
    {
        VOS_TRACE(VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_ERROR,
                "%s:LOGP in Progress. Ignore!!!", __func__);
        return -EAGAIN;
    }
    pRemainChanCtx = vos_mem_malloc( sizeof(hdd_remain_on_chan_ctx_t) );
    if( NULL == pRemainChanCtx )
    {
        hddLog(VOS_TRACE_LEVEL_FATAL,
             "%s: Not able to allocate memory for Channel context",
                                         __func__);
        return -ENOMEM;
    }

    vos_mem_copy( &pRemainChanCtx->chan, chan,
                   sizeof(struct ieee80211_channel) );

    pRemainChanCtx->chan_type = channel_type;
    pRemainChanCtx->duration = duration;
    pRemainChanCtx->dev = dev;
    *cookie = (tANI_U32) pRemainChanCtx;
    pRemainChanCtx->cookie = *cookie;
    pRemainChanCtx->rem_on_chan_request = request_type;
    cfgState->remain_on_chan_ctx = pRemainChanCtx;
    cfgState->current_freq = chan->center_freq;
    
    INIT_COMPLETION(pAdapter->rem_on_chan_ready_event);

    //call sme API to start remain on channel.
    if ( ( WLAN_HDD_INFRA_STATION == pAdapter->device_mode ) ||
         ( WLAN_HDD_P2P_CLIENT == pAdapter->device_mode ) ||
         ( WLAN_HDD_P2P_DEVICE == pAdapter->device_mode )
       )
    {
        tANI_U8 sessionId = pAdapter->sessionId;
        //call sme API to start remain on channel.
        sme_RemainOnChannel(
                       WLAN_HDD_GET_HAL_CTX(pAdapter), sessionId,
                       chan->hw_value, duration,
                       wlan_hdd_remain_on_channel_callback, pAdapter );

        sme_RegisterMgmtFrame(WLAN_HDD_GET_HAL_CTX(pAdapter),
                              sessionId, (SIR_MAC_MGMT_FRAME << 2) |
                              (SIR_MAC_MGMT_PROBE_REQ << 4), NULL, 0 );

    }
    else if ( ( WLAN_HDD_SOFTAP== pAdapter->device_mode ) ||
              ( WLAN_HDD_P2P_GO == pAdapter->device_mode )
            )
    {
        //call sme API to start remain on channel.
        if (VOS_STATUS_SUCCESS != WLANSAP_RemainOnChannel(
                          (WLAN_HDD_GET_CTX(pAdapter))->pvosContext,
                          chan->hw_value, duration,
                          wlan_hdd_remain_on_channel_callback, pAdapter ))

        {
           VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_ERROR,
                    "%s: WLANSAP_RemainOnChannel returned fail", __func__);
           cfgState->remain_on_chan_ctx = NULL;
           vos_mem_free (pRemainChanCtx);
           return -EINVAL;
        }


        if (VOS_STATUS_SUCCESS != WLANSAP_RegisterMgmtFrame(
                    (WLAN_HDD_GET_CTX(pAdapter))->pvosContext,
                    (SIR_MAC_MGMT_FRAME << 2) | ( SIR_MAC_MGMT_PROBE_REQ << 4),
                    NULL, 0 ))
        {
            VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_ERROR,
                    "%s: WLANSAP_RegisterMgmtFrame returned fail", __func__);
            WLANSAP_CancelRemainOnChannel(
                    (WLAN_HDD_GET_CTX(pAdapter))->pvosContext);
            return -EINVAL;
        }

    }
    return 0;

}

int wlan_hdd_cfg80211_remain_on_channel( struct wiphy *wiphy,
                                struct net_device *dev,
                                struct ieee80211_channel *chan,
                                enum nl80211_channel_type channel_type,
                                unsigned int duration, u64 *cookie )
{
    return wlan_hdd_request_remain_on_channel(wiphy, dev,
                                        chan, channel_type, duration, cookie,
                                        REMAIN_ON_CHANNEL_REQUEST);
}

void hdd_remainChanReadyHandler( hdd_adapter_t *pAdapter )
{
    hdd_cfg80211_state_t *cfgState = WLAN_HDD_GET_CFG_STATE_PTR( pAdapter );
    hdd_remain_on_chan_ctx_t* pRemainChanCtx = cfgState->remain_on_chan_ctx;

    hddLog( LOG1, "Ready on chan ind");

    if( pRemainChanCtx != NULL )
    {
        if( REMAIN_ON_CHANNEL_REQUEST == pRemainChanCtx->rem_on_chan_request )
        {
            cfg80211_ready_on_channel( pAdapter->dev, (tANI_U32)pRemainChanCtx,
                               &pRemainChanCtx->chan, pRemainChanCtx->chan_type,
                               pRemainChanCtx->duration, GFP_KERNEL );
        }
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38))
        else if( OFF_CHANNEL_ACTION_TX == pRemainChanCtx->rem_on_chan_request )
        {
            complete(&pAdapter->offchannel_tx_event);
        }
#endif
        complete(&pAdapter->rem_on_chan_ready_event);
    }
    else
    {
        hddLog( LOGW, "%s: No Pending Remain on channel Request", __func__);
    }
    return;
}

int wlan_hdd_cfg80211_cancel_remain_on_channel( struct wiphy *wiphy,
                                      struct net_device *dev, u64 cookie )
{
    hdd_adapter_t *pAdapter = WLAN_HDD_GET_PRIV_PTR(dev);
    hdd_cfg80211_state_t *cfgState = WLAN_HDD_GET_CFG_STATE_PTR( pAdapter );
    int status = 0;

    hddLog( LOG1, "Cancel remain on channel req");

    if (((hdd_context_t*)pAdapter->pHddCtx)->isLogpInProgress)
    {
        VOS_TRACE(VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_ERROR,
                "%s:LOGP in Progress. Ignore!!!", __func__);
        return -EAGAIN;
    }
    /* FIXME cancel currently running remain on chan.
     * Need to check cookie and cancel accordingly
     */
    if( (cfgState->remain_on_chan_ctx == NULL) ||
        (cfgState->remain_on_chan_ctx->cookie != cookie) )
    {
        hddLog( LOGE,
            "%s: No Remain on channel pending with specified cookie value",
             __func__);
        return -EINVAL;
    }
    
    /* wait until remain on channel ready event received 
     * for already issued remain on channel request */
    status = wait_for_completion_interruptible_timeout(&pAdapter->rem_on_chan_ready_event,
            msecs_to_jiffies(WAIT_REM_CHAN_READY));
    if (!status)
    {
        hddLog( LOGE, 
                "%s: timeout waiting for remain on channel ready indication",
                __func__);
    }
    INIT_COMPLETION(pAdapter->cancel_rem_on_chan_var);
    /* Issue abort remain on chan request to sme.
     * The remain on channel callback will make sure the remain_on_chan
     * expired event is sent.
     */
    if ( ( WLAN_HDD_INFRA_STATION == pAdapter->device_mode ) ||
         ( WLAN_HDD_P2P_CLIENT == pAdapter->device_mode ) ||
         ( WLAN_HDD_P2P_DEVICE == pAdapter->device_mode )
       )
    {
        tANI_U8 sessionId = pAdapter->sessionId; 
        sme_CancelRemainOnChannel( WLAN_HDD_GET_HAL_CTX( pAdapter ),
                                            sessionId );
    }
    else if ( (WLAN_HDD_SOFTAP== pAdapter->device_mode) ||
              (WLAN_HDD_P2P_GO == pAdapter->device_mode)
            )
    {
        WLANSAP_CancelRemainOnChannel(
                                (WLAN_HDD_GET_CTX(pAdapter))->pvosContext);
    }
    else 
    {
       hddLog(VOS_TRACE_LEVEL_ERROR, "%s: Invalid device_mode = %d",
                            __func__, pAdapter->device_mode);
       return -EIO;
    }
    wait_for_completion_interruptible_timeout(&pAdapter->cancel_rem_on_chan_var,
            msecs_to_jiffies(WAIT_CANCEL_REM_CHAN));
    return 0;
}

#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0))
int wlan_hdd_action( struct wiphy *wiphy, struct net_device *dev,
                     struct ieee80211_channel *chan, bool offchan,
                     enum nl80211_channel_type channel_type,
                     bool channel_type_valid, unsigned int wait,
                     const u8 *buf, size_t len,  bool no_cck,
                     bool dont_wait_for_ack, u64 *cookie )
#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38))
int wlan_hdd_action( struct wiphy *wiphy, struct net_device *dev,
                     struct ieee80211_channel *chan, bool offchan,
                     enum nl80211_channel_type channel_type,
                     bool channel_type_valid, unsigned int wait,
                     const u8 *buf, size_t len, u64 *cookie )
#else
int wlan_hdd_action( struct wiphy *wiphy, struct net_device *dev,
                     struct ieee80211_channel *chan,
                     enum nl80211_channel_type channel_type,
                     bool channel_type_valid,
                     const u8 *buf, size_t len, u64 *cookie )
#endif //LINUX_VERSION_CODE
{
    hdd_adapter_t *pAdapter = WLAN_HDD_GET_PRIV_PTR( dev );
    hdd_cfg80211_state_t *cfgState = WLAN_HDD_GET_CFG_STATE_PTR( pAdapter );
    tANI_U16 extendedWait = 0;
    tANI_U8 type = WLAN_HDD_GET_TYPE_FRM_FC(buf[0]);
    tANI_U8 subType = WLAN_HDD_GET_SUBTYPE_FRM_FC(buf[0]);
    tActionFrmType actionFrmType;
    bool noack = 0;

#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38))
    hdd_adapter_t *goAdapter;
#endif

#ifdef WLAN_FEATURE_P2P_DEBUG
    if ((type == SIR_MAC_MGMT_FRAME) &&
            (subType == SIR_MAC_MGMT_ACTION) &&
            (buf[WLAN_HDD_PUBLIC_ACTION_FRAME_OFFSET] == WLAN_HDD_PUBLIC_ACTION_FRAME))
    {
        actionFrmType = buf[WLAN_HDD_PUBLIC_ACTION_FRAME_TYPE_OFFSET];
        if(actionFrmType > MAX_P2P_ACTION_FRAME_TYPE)
        {
            hddLog(VOS_TRACE_LEVEL_ERROR,"[P2P] unknown[%d] ---> OTA",
                                   actionFrmType);
        }
        else
        {
            hddLog(VOS_TRACE_LEVEL_ERROR,"[P2P] %s ---> OTA",
            p2p_action_frame_type[actionFrmType]);
            if( (actionFrmType == WLAN_HDD_PROV_DIS_REQ) &&
                (globalP2PConnectionStatus == P2P_NOT_ACTIVE) )
            {
                 globalP2PConnectionStatus = P2P_GO_NEG_PROCESS;
                 hddLog(LOGE,"[P2P State]Inactive state to "
                            "GO negotation progress state");
            }
            else if( (actionFrmType == WLAN_HDD_GO_NEG_CNF) &&
                (globalP2PConnectionStatus == P2P_GO_NEG_PROCESS) )
            {
                 globalP2PConnectionStatus = P2P_GO_NEG_COMPLETED;
                 hddLog(LOGE,"[P2P State]GO nego progress to GO nego"
                             " completed state");
            }
        }
    }
#endif

#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0))
    noack = dont_wait_for_ack;
#endif

    //If the wait is coming as 0 with off channel set
    //then set the wait to 200 ms
    if (offchan && !wait)
        wait = ACTION_FRAME_DEFAULT_WAIT;

    hddLog(VOS_TRACE_LEVEL_INFO, "%s: device_mode = %d",
                            __func__,pAdapter->device_mode);

    //Call sme API to send out a action frame.
    // OR can we send it directly through data path??
    // After tx completion send tx status back.
    if ( ( WLAN_HDD_SOFTAP == pAdapter->device_mode ) ||
         ( WLAN_HDD_P2P_GO == pAdapter->device_mode )
       )
    {
        if (type == SIR_MAC_MGMT_FRAME)
        {
            if (subType == SIR_MAC_MGMT_PROBE_RSP)
            {
                /* Drop Probe response recieved from supplicant, as for GO and 
                   SAP PE itself sends probe response
                   */ 
                goto err_rem_channel;
            }
            else if ((subType == SIR_MAC_MGMT_DISASSOC) ||
                    (subType == SIR_MAC_MGMT_DEAUTH))
            {
                /* During EAP failure or P2P Group Remove supplicant
                 * is sending del_station command to driver. From
                 * del_station function, Driver will send deauth frame to
                 * p2p client. No need to send disassoc frame from here.
                 * so Drop the frame here and send tx indication back to
                 * supplicant.
                 */
                tANI_U8 dstMac[ETH_ALEN] = {0};
                memcpy(&dstMac, &buf[WLAN_HDD_80211_FRM_DA_OFFSET], ETH_ALEN);
                hddLog(VOS_TRACE_LEVEL_INFO,
                        "%s: Deauth/Disassoc received for STA:"
                        "%02x:%02x:%02x:%02x:%02x:%02x",
                        __func__,
                        dstMac[0], dstMac[1], dstMac[2],
                        dstMac[3], dstMac[4], dstMac[5]);
                goto err_rem_channel;
            }
        }
    }

    if( NULL != cfgState->buf )
        return -EBUSY;

    hddLog( LOG1, "Action frame tx request");

#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38))
    goAdapter = hdd_get_adapter( pAdapter->pHddCtx, WLAN_HDD_P2P_GO );

    //If GO adapter exists and operating on same frequency
    //then we will not request remain on channel
    if( goAdapter && ( ieee80211_frequency_to_channel(chan->center_freq)
                         == goAdapter->sessionCtx.ap.operatingChannel ) )
    {
        goto send_frame;
    }
#endif

#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38))
    if( offchan && wait)
    {
        int status;

        // In case of P2P Client mode if we are already
        // on the same channel then send the frame directly

        if((cfgState->remain_on_chan_ctx != NULL) &&
           (cfgState->current_freq == chan->center_freq)
          )
        {
            hddLog(LOG1,"action frame: extending the wait time\n");
            extendedWait = (tANI_U16)wait;
            goto send_frame;
        }

        INIT_COMPLETION(pAdapter->offchannel_tx_event);

        status = wlan_hdd_request_remain_on_channel(wiphy, dev,
                                        chan, channel_type, wait, cookie,
                                        OFF_CHANNEL_ACTION_TX);

        if(0 != status)
        {
            if( (-EBUSY == status) &&
                (cfgState->current_freq == chan->center_freq) )
            {
                goto send_frame;
            }
            goto err_rem_channel;
        }

        /* Wait for driver to be ready on the requested channel */
        status = wait_for_completion_interruptible_timeout(
                     &pAdapter->offchannel_tx_event,
                     msecs_to_jiffies(WAIT_CHANGE_CHANNEL_FOR_OFFCHANNEL_TX));
        if(!status)
        {
            hddLog( LOGE, "Not able to complete remain on channel request"
                          " within timeout period");
            goto err_rem_channel;
        }
    }
    else if ( offchan )
    {
        /* Check before sending action frame
           whether we already remain on channel */
        if(NULL == cfgState->remain_on_chan_ctx)
        {
            goto err_rem_channel;
        }
    }
    send_frame:
#endif

    if(!noack)
    {
        cfgState->buf = vos_mem_malloc( len ); //buf;
        if( cfgState->buf == NULL )
            return -ENOMEM;

        cfgState->len = len;

        vos_mem_copy( cfgState->buf, buf, len);

#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38))
        if( cfgState->remain_on_chan_ctx )
        {
            cfgState->action_cookie = cfgState->remain_on_chan_ctx->cookie;
            *cookie = cfgState->action_cookie;
        }
        else
        {
#endif
            *cookie = (tANI_U32) cfgState->buf;
            cfgState->action_cookie = *cookie;
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38))
        }
#endif
    } 

    if ( (WLAN_HDD_INFRA_STATION == pAdapter->device_mode) ||
         (WLAN_HDD_P2P_CLIENT == pAdapter->device_mode) ||
         ( WLAN_HDD_P2P_DEVICE == pAdapter->device_mode )
       )
    {
        tANI_U8 sessionId = pAdapter->sessionId;
        if ((type == SIR_MAC_MGMT_FRAME) &&
                (subType == SIR_MAC_MGMT_ACTION) &&
                (buf[WLAN_HDD_PUBLIC_ACTION_FRAME_OFFSET] == WLAN_HDD_PUBLIC_ACTION_FRAME))
        {
            actionFrmType = buf[WLAN_HDD_PUBLIC_ACTION_FRAME_TYPE_OFFSET];
            hddLog(LOG1, "Tx Action Frame %u \n", actionFrmType);
            if (actionFrmType == WLAN_HDD_PROV_DIS_REQ)
            {
                cfgState->actionFrmState = HDD_PD_REQ_ACK_PENDING;
                hddLog(LOG1, "%s: HDD_PD_REQ_ACK_PENDING \n", __func__);
            }
            else if (actionFrmType == WLAN_HDD_GO_NEG_REQ)
            {
                cfgState->actionFrmState = HDD_GO_NEG_REQ_ACK_PENDING;
                hddLog(LOG1, "%s: HDD_GO_NEG_REQ_ACK_PENDING \n", __func__);
            }
        }

        if (eHAL_STATUS_SUCCESS !=
               sme_sendAction( WLAN_HDD_GET_HAL_CTX(pAdapter),
                               sessionId, buf, len, extendedWait, noack))
        {
            VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_ERROR,
                     "%s: sme_sendAction returned fail", __func__);
            goto err;
        }
    }
    else if( ( WLAN_HDD_SOFTAP== pAdapter->device_mode ) ||
              ( WLAN_HDD_P2P_GO == pAdapter->device_mode )
            )
     {
        if( VOS_STATUS_SUCCESS !=
             WLANSAP_SendAction( (WLAN_HDD_GET_CTX(pAdapter))->pvosContext,
                                  buf, len, 0 ) )
        {
            VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_ERROR,
                    "%s: WLANSAP_SendAction returned fail", __func__);
            goto err;
        }
    }

    return 0;
err:
    if(!noack)
    {
       hdd_sendActionCnf( pAdapter, FALSE );
    }
    return 0;
err_rem_channel:
    *cookie = (tANI_U32)cfgState;
    cfg80211_mgmt_tx_status( pAdapter->dev, *cookie, buf, len, FALSE, GFP_KERNEL );
    return 0;
}

#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38))
int wlan_hdd_cfg80211_mgmt_tx_cancel_wait(struct wiphy *wiphy, 
                                          struct net_device *dev,
                                          u64 cookie)
{
    return wlan_hdd_cfg80211_cancel_remain_on_channel( wiphy, dev, cookie );
}
#endif

void hdd_sendActionCnf( hdd_adapter_t *pAdapter, tANI_BOOLEAN actionSendSuccess )
{
    hdd_cfg80211_state_t *cfgState = WLAN_HDD_GET_CFG_STATE_PTR( pAdapter );

    cfgState->actionFrmState = HDD_IDLE;

    hddLog( LOG1, "Send Action cnf, actionSendSuccess %d", actionSendSuccess);
    if( NULL == cfgState->buf )
    {
        return;
    }

    /* If skb is NULL it means this packet was received on CFG80211 interface
     * else it was received on Monitor interface */
    if( cfgState->skb == NULL )
    {
        /*
         * buf is the same pointer it passed us to send. Since we are sending
         * it through control path, we use different buffers.
         * In case of mac80211, they just push it to the skb and pass the same
         * data while sending tx ack status.
         * */
         cfg80211_mgmt_tx_status( pAdapter->dev, cfgState->action_cookie,
                cfgState->buf, cfgState->len, actionSendSuccess, GFP_KERNEL );
         vos_mem_free( cfgState->buf );
         cfgState->buf = NULL;
    }
    else
    {
        hdd_adapter_t* pMonAdapter =
                    hdd_get_adapter( pAdapter->pHddCtx, WLAN_HDD_MONITOR );
        if( pMonAdapter == NULL )
        {
            hddLog( LOGE, "Not able to get Monitor Adapter");
            cfgState->skb = NULL;
            vos_mem_free( cfgState->buf );
            cfgState->buf = NULL;
            complete(&pAdapter->tx_action_cnf_event);
            return;
        }
        /* Send TX completion feedback over monitor interface. */
        hdd_wlan_tx_complete( pMonAdapter, cfgState, actionSendSuccess );
        cfgState->skb = NULL;
        vos_mem_free( cfgState->buf );
        cfgState->buf = NULL;
        /* Look for the next Mgmt packet to TX */
        hdd_mon_tx_mgmt_pkt(pAdapter);
    }
    complete(&pAdapter->tx_action_cnf_event);
}

/**
 * hdd_setP2pNoa
 *
 *FUNCTION:
 * This function is called from hdd_hostapd_ioctl function when Driver 
 * get P2P_SET_NOA comand from wpa_supplicant using private ioctl
 *
 *LOGIC:
 * Fill NoA Struct According to P2P Power save Option and Pass it to SME layer 
 *
 *ASSUMPTIONS:
 *
 *
 *NOTE:
 *
 * @param  dev         Pointer to net device structure
 * @param  command     Pointer to command 
 *
 * @return Status
 */

int hdd_setP2pNoa( struct net_device *dev, tANI_U8 *command )
{
    hdd_adapter_t *pAdapter = WLAN_HDD_GET_PRIV_PTR(dev);
    tHalHandle hHal = WLAN_HDD_GET_HAL_CTX(pAdapter);
    VOS_STATUS status = VOS_STATUS_SUCCESS;
    tP2pPsConfig NoA;
    int count, duration, interval;
    char *param;

    param = strchr(command, ' ');
    if (param == NULL)
        return -1;
    param++;
    sscanf(param, "%d %d %d", &count, &duration, &interval);
    VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_INFO,
               "%s: P2P_SET GO NoA: count=%d duration=%d interval=%d \n",
                __func__, count, duration, interval);

    /* PS Selection
     * Periodic NoA (2)
     * Single NOA   (4)
     */
    NoA.opp_ps = 0;
    NoA.ctWindow = 0;
    if (count == 1)
    {
        NoA.duration = 0;
        NoA.single_noa_duration = duration;
        NoA.psSelection = P2P_POWER_SAVE_TYPE_SINGLE_NOA;
    }
    else
    {
        NoA.duration = duration;
        NoA.single_noa_duration = 0;
        NoA.psSelection = P2P_POWER_SAVE_TYPE_PERIODIC_NOA;
    }
    NoA.interval = interval;
    NoA.count = count;
    NoA.sessionid = pAdapter->sessionId;

    VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_INFO,
                "%s: P2P_PS_ATTR:oppPS %d ctWindow %d duration %d "
                "interval %d count %d single noa duration %d "
                "PsSelection %x \n", __func__, NoA.opp_ps, 
                NoA.ctWindow, NoA.duration, NoA.interval, 
                NoA.count, NoA.single_noa_duration,
                NoA.psSelection);

    sme_p2pSetPs(hHal, &NoA);
    return status;
}

/**
 * hdd_setP2pOpps
 *
 *FUNCTION:
 * This function is called from hdd_hostapd_ioctl function when Driver
 * get P2P_SET_PS comand from wpa_supplicant using private ioctl
 *
 *LOGIC:
 * Fill NoA Struct According to P2P Power save Option and Pass it to SME layer
 *
 *ASSUMPTIONS:
 *
 *
 *NOTE:
 *
 * @param  dev         Pointer to net device structure
 * @param  command     Pointer to command
 *
 * @return Status
 */

int hdd_setP2pOpps( struct net_device *dev, tANI_U8 *command )
{
    hdd_adapter_t *pAdapter = WLAN_HDD_GET_PRIV_PTR(dev);
    tHalHandle hHal = WLAN_HDD_GET_HAL_CTX(pAdapter);
    VOS_STATUS status = VOS_STATUS_SUCCESS;
    tP2pPsConfig NoA;
    char *param;
    int legacy_ps, opp_ps, ctwindow;

    param = strchr(command, ' ');
    if (param == NULL)
        return -1;
    param++;
    sscanf(param, "%d %d %d", &legacy_ps, &opp_ps, &ctwindow);
    VOS_TRACE (VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_INFO,
                 "%s: P2P_SET GO PS: legacy_ps=%d opp_ps=%d ctwindow=%d \n",
                 __func__, legacy_ps, opp_ps, ctwindow);

    /* PS Selection
     * Opportunistic Power Save (1)
     */

    /* From wpa_cli user need to use separate command to set ctWindow and Opps
     * When user want to set ctWindow during that time other parameters
     * values are coming from wpa_supplicant as -1. 
     * Example : User want to set ctWindow with 30 then wpa_cli command : 
     * P2P_SET ctwindow 30 
     * Command Received at hdd_hostapd_ioctl is as below: 
     * P2P_SET_PS -1 -1 30 (legacy_ps = -1, opp_ps = -1, ctwindow = 30)
     */ 
    if (ctwindow != -1)
    {

        VOS_TRACE(VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_INFO,
                    "Opportunistic Power Save is %s \n", 
                    (TRUE == pAdapter->ops) ? "Enable" : "Disable" );

        if (ctwindow != pAdapter->ctw)
        {
            pAdapter->ctw = ctwindow;
        
            if(pAdapter->ops)
            {
                NoA.opp_ps = pAdapter->ops;
                NoA.ctWindow = pAdapter->ctw;
                NoA.duration = 0;
                NoA.single_noa_duration = 0;
                NoA.interval = 0;
                NoA.count = 0;
                NoA.psSelection = P2P_POWER_SAVE_TYPE_OPPORTUNISTIC;
                NoA.sessionid = pAdapter->sessionId;
 
                VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_INFO,
                            "%s: P2P_PS_ATTR:oppPS %d ctWindow %d duration %d "
                            "interval %d count %d single noa duration %d "
                            "PsSelection %x \n", __func__, NoA.opp_ps, 
                            NoA.ctWindow, NoA.duration, NoA.interval, 
                            NoA.count, NoA.single_noa_duration,
                            NoA.psSelection);

               sme_p2pSetPs(hHal, &NoA);
           }
           return 0;
        }
    }

    if (opp_ps != -1)
    {
        pAdapter->ops = opp_ps;

        if ((opp_ps != -1) && (pAdapter->ctw)) 
        {
            NoA.opp_ps = opp_ps;
            NoA.ctWindow = pAdapter->ctw;
            NoA.duration = 0;
            NoA.single_noa_duration = 0;
            NoA.interval = 0;
            NoA.count = 0;
            NoA.psSelection = P2P_POWER_SAVE_TYPE_OPPORTUNISTIC;
            NoA.sessionid = pAdapter->sessionId;

            VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_INFO,
                        "%s: P2P_PS_ATTR:oppPS %d ctWindow %d duration %d "
                        "interval %d count %d single noa duration %d "
                        "PsSelection %x \n", __func__, NoA.opp_ps, 
                        NoA.ctWindow, NoA.duration, NoA.interval, 
                        NoA.count, NoA.single_noa_duration,
                        NoA.psSelection);

           sme_p2pSetPs(hHal, &NoA);
        }
    }
    return status;
}

int hdd_setP2pPs( struct net_device *dev, void *msgData )
{
    hdd_adapter_t *pAdapter = WLAN_HDD_GET_PRIV_PTR(dev);
    tHalHandle hHal = WLAN_HDD_GET_HAL_CTX(pAdapter);
    VOS_STATUS status = VOS_STATUS_SUCCESS;
    tP2pPsConfig NoA;
    p2p_app_setP2pPs_t *pappNoA = (p2p_app_setP2pPs_t *) msgData;

    NoA.opp_ps = pappNoA->opp_ps;
    NoA.ctWindow = pappNoA->ctWindow;
    NoA.duration = pappNoA->duration;
    NoA.interval = pappNoA->interval;
    NoA.count = pappNoA->count;
    NoA.single_noa_duration = pappNoA->single_noa_duration;
    NoA.psSelection = pappNoA->psSelection;
    NoA.sessionid = pAdapter->sessionId;

    sme_p2pSetPs(hHal, &NoA);
    return status;
}
#endif

static tANI_U8 wlan_hdd_get_session_type( enum nl80211_iftype type )
{
    tANI_U8 sessionType;

    switch( type )
    {
        case NL80211_IFTYPE_AP:
            sessionType = WLAN_HDD_SOFTAP;
            break;
        case NL80211_IFTYPE_P2P_GO:
            sessionType = WLAN_HDD_P2P_GO;
            break;
        case NL80211_IFTYPE_P2P_CLIENT:
            sessionType = WLAN_HDD_P2P_CLIENT;
            break;
        case NL80211_IFTYPE_STATION:
            sessionType = WLAN_HDD_INFRA_STATION;
            break;
        case NL80211_IFTYPE_MONITOR:
            sessionType = WLAN_HDD_MONITOR;
            break;
        default:
            sessionType = WLAN_HDD_INFRA_STATION;
            break;
    }

    return sessionType;
}

#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38))
struct net_device* wlan_hdd_add_virtual_intf(
                  struct wiphy *wiphy, char *name, enum nl80211_iftype type,
                  u32 *flags, struct vif_params *params )
#else
int wlan_hdd_add_virtual_intf( struct wiphy *wiphy, char *name,
                               enum nl80211_iftype type,
                               u32 *flags, struct vif_params *params )
#endif
{
    hdd_context_t *pHddCtx = (hdd_context_t*) wiphy_priv(wiphy);
    hdd_adapter_t* pAdapter = NULL;

    ENTER();

    if(hdd_get_adapter(pHddCtx, wlan_hdd_get_session_type(type)) != NULL)
    {
       hddLog(VOS_TRACE_LEVEL_ERROR,"%s: Interface type %d already exists. Two"
                     "interfaces of same type are not supported currently.",__func__, type);
       return NULL;
    }

    if (pHddCtx->isLogpInProgress)
    {
       VOS_TRACE(VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_ERROR,
                "%s:LOGP in Progress. Ignore!!!", __func__);
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38))
       return NULL;
#else
       return -EAGAIN;
#endif
    }
    if ( pHddCtx->cfg_ini->isP2pDeviceAddrAdministrated )
    {
        if( (NL80211_IFTYPE_P2P_GO == type) || 
            (NL80211_IFTYPE_P2P_CLIENT == type) )
        {
            /* Generate the P2P Interface Address. this address must be
             * different from the P2P Device Address.
             */
            v_MACADDR_t p2pDeviceAddress = pHddCtx->p2pDeviceAddress;
            p2pDeviceAddress.bytes[4] ^= 0x80;
            pAdapter = hdd_open_adapter( pHddCtx, 
                                         wlan_hdd_get_session_type(type),
                                         name, p2pDeviceAddress.bytes,
                                         VOS_TRUE );
        }
    }
    else
    {
       pAdapter = hdd_open_adapter( pHddCtx, wlan_hdd_get_session_type(type),
                          name, wlan_hdd_get_intf_addr(pHddCtx), VOS_TRUE );
    }

    if( NULL == pAdapter)
    {
        hddLog(VOS_TRACE_LEVEL_ERROR,"%s: hdd_open_adapter failed",__func__);
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38))
        return NULL;
#else
        return -EINVAL;
#endif
    }
    EXIT();
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38))
    return pAdapter->dev;
#else
    return 0;
#endif
}

int wlan_hdd_del_virtual_intf( struct wiphy *wiphy, struct net_device *dev )
{
     hdd_context_t *pHddCtx = (hdd_context_t*) wiphy_priv(wiphy);
     hdd_adapter_t *pVirtAdapter = WLAN_HDD_GET_PRIV_PTR(dev);
     ENTER();

     hddLog(VOS_TRACE_LEVEL_INFO, "%s: device_mode = %d",
            __func__,pVirtAdapter->device_mode);
     if (pHddCtx->isLogpInProgress)
     {
         VOS_TRACE(VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_ERROR,
                "%s:LOGP in Progress. Ignore!!!", __func__);
         return -EAGAIN;
     }

     wlan_hdd_release_intf_addr( pHddCtx,
                                 pVirtAdapter->macAddressCurrent.bytes );

     hdd_stop_adapter( pHddCtx, pVirtAdapter );
     hdd_close_adapter( pHddCtx, pVirtAdapter, TRUE );
     EXIT();
     return 0;
}

void hdd_sendMgmtFrameOverMonitorIface( hdd_adapter_t *pMonAdapter,
                                        tANI_U32 nFrameLength, tANI_U8* pbFrames,
                                        tANI_U8 frameType )  
{
    //Indicate a Frame over Monitor Intf.
    int rxstat;
    struct sk_buff *skb = NULL;
    int needed_headroom = 0;
    int flag = HDD_RX_FLAG_IV_STRIPPED | HDD_RX_FLAG_DECRYPTED |
               HDD_RX_FLAG_MMIC_STRIPPED;
#ifdef WLAN_FEATURE_HOLD_RX_WAKELOCK
    hdd_context_t* pHddCtx = (hdd_context_t*)(pMonAdapter->pHddCtx);
#endif
    hddLog( LOG1, FL("Indicate Frame over Monitor Intf"));

    VOS_ASSERT( (pbFrames != NULL) );

    /* room for the radiotap header based on driver features
     * 1 Byte for RADIO TAP Flag, 1 Byte padding and 2 Byte for
     * RX flags.
     * */
     needed_headroom = sizeof(struct ieee80211_radiotap_header) + 4;

     //alloc skb  here
     skb = alloc_skb(VPKT_SIZE_BUFFER, GFP_ATOMIC);
     if (unlikely(NULL == skb))
     {
         hddLog( LOGW, FL("Unable to allocate skb"));
         return;
     }
     skb_reserve(skb, VPKT_SIZE_BUFFER);
     if (unlikely(skb_headroom(skb) < nFrameLength))
     {
         VOS_TRACE(VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_FATAL,
                   "HDD [%d]: Insufficient headroom, "
                   "head[%p], data[%p], req[%d]",
                   __LINE__, skb->head, skb->data, nFrameLength);
         kfree_skb(skb);
         return ;
     }
     // actually push the data
     memcpy(skb_push(skb, nFrameLength), pbFrames, nFrameLength);
     /* prepend radiotap information */
     if( 0 != hdd_wlan_add_rx_radiotap_hdr( skb, needed_headroom, flag ) )
     {
         hddLog( LOGE, FL("Not Able Add Radio Tap"));
         //free skb
         kfree_skb(skb);
         return ;
     }

     skb_reset_mac_header( skb );
     skb->dev = pMonAdapter->dev;
     skb->protocol = eth_type_trans( skb, skb->dev );
     skb->ip_summed = CHECKSUM_NONE;
#ifdef WLAN_FEATURE_HOLD_RX_WAKELOCK
     wake_lock_timeout(&pHddCtx->rx_wake_lock, HDD_WAKE_LOCK_DURATION);
#endif
     rxstat = netif_rx_ni(skb);
     if( NET_RX_SUCCESS == rxstat )
     {
         hddLog( LOG1, FL("Success"));
     }
     else
         hddLog( LOGE, FL("Failed %d"), rxstat);                   

     return ;
}

void hdd_indicateMgmtFrame( hdd_adapter_t *pAdapter,
                            tANI_U32 nFrameLength, 
                            tANI_U8* pbFrames,
                            tANI_U8 frameType,
                            tANI_U32 rxChan )
{
    tANI_U16 freq;
    tANI_U8 type = 0;
    tANI_U8 subType = 0;
    tActionFrmType actionFrmType;
    hdd_cfg80211_state_t *cfgState = NULL;

    hddLog(VOS_TRACE_LEVEL_INFO, "%s: Frame Type = %d Frame Length = %d\n",
            __func__, frameType, nFrameLength);

    if (NULL == pAdapter)
    {
        hddLog( LOGE, FL("pAdapter is NULL"));
        return;
    }

    type = WLAN_HDD_GET_TYPE_FRM_FC(pbFrames[0]);
    subType = WLAN_HDD_GET_SUBTYPE_FRM_FC(pbFrames[0]);

    /* Get pAdapter from Destination mac address of the frame */
    if ((type == SIR_MAC_MGMT_FRAME) &&
            (subType != SIR_MAC_MGMT_PROBE_REQ))
    {
         pAdapter = hdd_get_adapter_by_macaddr( WLAN_HDD_GET_CTX(pAdapter),
                            &pbFrames[WLAN_HDD_80211_FRM_DA_OFFSET]);
         if (NULL == pAdapter)
         {
             /* Under assumtion that we don't receive any action frame
              * with BCST as destination we dropping action frame
              */
             VOS_ASSERT(0);
             hddLog( LOGP, FL("pAdapter for action frame is NULL"));
             return;
         }
    }

    if (NULL == pAdapter->dev)
    {
        hddLog( LOGE, FL("pAdapter->dev is NULL"));
        return;
    }

    if (WLAN_HDD_ADAPTER_MAGIC != pAdapter->magic)
    {
        hddLog( LOGE, FL("pAdapter has invalid magic"));
        return;
    }

    if( !nFrameLength )
    {
        hddLog( LOGE, FL("Frame Length is Invalid ZERO"));
        return;
    }

    if (NULL == pbFrames) {
        hddLog( LOGE, FL("pbFrames is NULL"));
        return;
    }


    if( ( WLAN_HDD_SOFTAP == pAdapter->device_mode ) 
            || ( WLAN_HDD_P2P_GO == pAdapter->device_mode )
      )
    {
        hdd_adapter_t *pMonAdapter =
            hdd_get_mon_adapter( WLAN_HDD_GET_CTX(pAdapter) );

        if( NULL != pMonAdapter )
        {
            hddLog( LOG1, FL("Indicate Frame over Monitor Interface"));
            hdd_sendMgmtFrameOverMonitorIface( pMonAdapter, nFrameLength,
                    pbFrames, frameType);
            return;
        }
    }

    //Channel indicated may be wrong. TODO
    //Indicate an action frame.
    if( rxChan <= MAX_NO_OF_2_4_CHANNELS )
    {
        freq = ieee80211_channel_to_frequency( rxChan,
                IEEE80211_BAND_2GHZ);
    }
    else
    {
        freq = ieee80211_channel_to_frequency( rxChan,
                IEEE80211_BAND_5GHZ);
    }

    cfgState = WLAN_HDD_GET_CFG_STATE_PTR( pAdapter );
    
    if ((type == SIR_MAC_MGMT_FRAME) && 
            (subType == SIR_MAC_MGMT_ACTION) &&
            (pbFrames[WLAN_HDD_PUBLIC_ACTION_FRAME_OFFSET] == WLAN_HDD_PUBLIC_ACTION_FRAME))
    {
        actionFrmType = pbFrames[WLAN_HDD_PUBLIC_ACTION_FRAME_TYPE_OFFSET];
        hddLog(LOG1, "Rx Action Frame %u \n", actionFrmType);
#ifdef WLAN_FEATURE_P2P_DEBUG
        if(actionFrmType > MAX_P2P_ACTION_FRAME_TYPE)
        {
            hddLog(VOS_TRACE_LEVEL_ERROR,"[P2P] unknown[%d] <--- OTA",
                                                        actionFrmType);
        }
        else
        {
            hddLog(VOS_TRACE_LEVEL_ERROR,"[P2P] %s <--- OTA",
            p2p_action_frame_type[actionFrmType]);
            if( (actionFrmType == WLAN_HDD_PROV_DIS_REQ) &&
                (globalP2PConnectionStatus == P2P_NOT_ACTIVE) )
            {
                 globalP2PConnectionStatus = P2P_GO_NEG_PROCESS;
                 hddLog(LOGE,"[P2P State]Inactive state to "
                           "GO negotation progress state");
            }
            else if( (actionFrmType == WLAN_HDD_GO_NEG_CNF) &&
                (globalP2PConnectionStatus == P2P_GO_NEG_PROCESS) )
            {
                 globalP2PConnectionStatus = P2P_GO_NEG_COMPLETED;
                 hddLog(LOGE,"[P2P State]GO nego progress to GO nego"
                             " completed state");
            }
            else if( (actionFrmType == WLAN_HDD_INVITATION_REQ) &&
                (globalP2PConnectionStatus == P2P_NOT_ACTIVE) )
            {
                 globalP2PConnectionStatus = P2P_GO_NEG_COMPLETED;
                 hddLog(LOGE,"[P2P State]Inactive state to GO nego"
                             " completed state Autonomus GO fromation");
            }
        }
#endif

        if (((actionFrmType == WLAN_HDD_PROV_DIS_RESP) &&
                    (cfgState->actionFrmState == HDD_PD_REQ_ACK_PENDING)) ||
                ((actionFrmType == WLAN_HDD_GO_NEG_RESP) &&
                 (cfgState->actionFrmState == HDD_GO_NEG_REQ_ACK_PENDING)))
        {
            hddLog(LOG1, "%s: ACK_PENDING and But received RESP for Action frame ", 
                    __func__);
            hdd_sendActionCnf(pAdapter, TRUE);
        }
    }

    //Indicate Frame Over Normal Interface
    hddLog( LOG1, FL("Indicate Frame over NL80211 Interface"));

#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,4,0))
    cfg80211_rx_mgmt( pAdapter->dev, freq, 0,
                      pbFrames, nFrameLength,
                      GFP_ATOMIC );
#else
    cfg80211_rx_mgmt( pAdapter->dev, freq,
                      pbFrames, nFrameLength,
                      GFP_ATOMIC );
#endif //LINUX_VERSION_CODE
}

/*
 * ieee80211_add_rx_radiotap_header - add radiotap header
 */
static int hdd_wlan_add_rx_radiotap_hdr (
             struct sk_buff *skb, int rtap_len, int flag )
{
    u8 rtap_temp[20] = {0};
    struct ieee80211_radiotap_header *rthdr;
    unsigned char *pos;
    u16 rx_flags = 0;

    rthdr = (struct ieee80211_radiotap_header *)(&rtap_temp[0]);

    /* radiotap header, set always present flags */
    rthdr->it_present = cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS)   |
                                    (1 << IEEE80211_RADIOTAP_RX_FLAGS));
    rthdr->it_len = cpu_to_le16(rtap_len);

    pos = (unsigned char *) (rthdr + 1);

    /* the order of the following fields is important */

    /* IEEE80211_RADIOTAP_FLAGS */
    *pos = 0;
    pos++;

    /* IEEE80211_RADIOTAP_RX_FLAGS: Length 2 Bytes */
    /* ensure 2 byte alignment for the 2 byte field as required */
    if ((pos - (u8 *)rthdr) & 1)
        pos++;
    put_unaligned_le16(rx_flags, pos);
    pos += 2;
    
    // actually push the data
    memcpy(skb_push(skb, rtap_len), &rtap_temp[0], rtap_len);

    return 0;
}

static void hdd_wlan_tx_complete( hdd_adapter_t* pAdapter,
                                  hdd_cfg80211_state_t* cfgState,
                                  tANI_BOOLEAN actionSendSuccess )
{
    struct ieee80211_radiotap_header *rthdr;
    unsigned char *pos;
    struct sk_buff *skb = cfgState->skb;
#ifdef WLAN_FEATURE_HOLD_RX_WAKELOCK
    hdd_context_t *pHddCtx = (hdd_context_t*)(pAdapter->pHddCtx);
#endif

    /* 2 Byte for TX flags and 1 Byte for Retry count */
    u32 rtHdrLen = sizeof(*rthdr) + 3;

    u8 *data;

    /* We have to return skb with Data starting with MAC header. We have
     * copied SKB data starting with MAC header to cfgState->buf. We will pull
     * entire skb->len from skb and then we will push cfgState->buf to skb
     * */
    if( NULL == skb_pull(skb, skb->len) )
    {
        hddLog( LOGE, FL("Not Able to Pull %d byte from skb"), skb->len);
        kfree_skb(cfgState->skb);
        return;
    }

    data = skb_push( skb, cfgState->len );

    if (data == NULL)
    {
        hddLog( LOGE, FL("Not Able to Push %d byte to skb"), cfgState->len);
        kfree_skb( cfgState->skb );
        return;
    }

    memcpy( data, cfgState->buf, cfgState->len );

    /* send frame to monitor interfaces now */
    if( skb_headroom(skb) < rtHdrLen )
    {
        hddLog( LOGE, FL("No headroom for rtap header"));
        kfree_skb(cfgState->skb);
        return;
    }

    rthdr = (struct ieee80211_radiotap_header*) skb_push( skb, rtHdrLen );

    memset( rthdr, 0, rtHdrLen );
    rthdr->it_len = cpu_to_le16( rtHdrLen );
    rthdr->it_present = cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
                                    (1 << IEEE80211_RADIOTAP_DATA_RETRIES)
                                   );

    pos = (unsigned char *)( rthdr+1 );

    // Fill TX flags
    *pos = actionSendSuccess;
    pos += 2;

    // Fill retry count
    *pos = 0;
    pos++;

    skb_set_mac_header( skb, 0 );
    skb->ip_summed = CHECKSUM_NONE;
    skb->pkt_type  = PACKET_OTHERHOST;
    skb->protocol  = htons(ETH_P_802_2);
    memset( skb->cb, 0, sizeof( skb->cb ) );
#ifdef WLAN_FEATURE_HOLD_RX_WAKELOCK
    wake_lock_timeout(&pHddCtx->rx_wake_lock, HDD_WAKE_LOCK_DURATION);
#endif
    if (in_interrupt())
        netif_rx( skb );
    else
        netif_rx_ni( skb );

    /* Enable Queues which we have disabled earlier */
    netif_tx_start_all_queues( pAdapter->dev ); 

}
#endif // CONFIG_CFG80211