diff --git a/CORE/SME/inc/pmcApi.h b/CORE/SME/inc/pmcApi.h
new file mode 100644
index 0000000..05a7fff
--- /dev/null
+++ b/CORE/SME/inc/pmcApi.h
@@ -0,0 +1,484 @@
+/*
+ * Copyright (c) 2012, Code Aurora Forum. All rights reserved.
+ *
+ * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
+ *
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/******************************************************************************
+
+*
+
+* Name:  pmcApi.h
+
+*
+
+* Description: Power Management Control (PMC) API definitions.
+
+* Copyright 2008 (c) Qualcomm, Incorporated.  
+
+* All Rights Reserved.
+
+* Qualcomm Confidential and Proprietary.
+
+*
+
+******************************************************************************/
+
+
+#ifndef __PMC_API_H__
+
+#define __PMC_API_H__
+
+//This timer value determines the default periodicity at which BMPS retries will happen
+//This default value is overwritten typicaly by OS specific registry/INI values. 
+#define BMPS_TRAFFIC_TIMER_DEFAULT 5000  //unit = ms
+#define DHCP_REMAIN_POWER_ACTIVE_THRESHOLD 12 // (12 * 5) sec = 60 seconds = 1 min
+
+//This timer value is used when starting the timer right after association. This value
+//should be large enough to allow the auth, DHCP handshake to complete
+#define BMPS_TRAFFIC_TIMER_ALLOW_SECURITY_DHCP 8000  //unit = ms
+
+#define PMC_IS_CHIP_ACCESSIBLE(pmcState) ( (IMPS != (pmcState)) && (REQUEST_IMPS != (pmcState)) && \
+       (STANDBY != (pmcState)) && (REQUEST_STANDBY != (pmcState)) )
+
+
+
+/* Power events that are signaled to PMC. */
+
+typedef enum ePmcPowerEvent
+
+{
+
+    ePMC_SYSTEM_HIBERNATE,  /* host is entering hibernation */
+
+    ePMC_SYSTEM_RESUME,  /* host is resuming after hibernation */
+
+    ePMC_HW_WLAN_SWITCH_OFF,  /* Hardware WLAN Switch has been turned off */
+
+    ePMC_HW_WLAN_SWITCH_ON,  /* Hardware WLAN Switch has been turned on */
+
+    ePMC_SW_WLAN_SWITCH_OFF,  /* Software WLAN Switch has been turned off */
+
+    ePMC_SW_WLAN_SWITCH_ON,  /* Software WLAN Switch has been turned on */
+
+    ePMC_BATTERY_OPERATION,  /* host is now operating on battery power */
+
+    ePMC_AC_OPERATION  /* host is now operating on AC power */
+
+} tPmcPowerEvent;
+
+
+
+
+/* Power saving modes. */
+
+typedef enum ePmcPowerSavingMode
+
+{
+
+    ePMC_IDLE_MODE_POWER_SAVE,  /* Idle Mode Power Save (IMPS) */
+
+    ePMC_BEACON_MODE_POWER_SAVE,  /* Beacon Mode Power Save (BMPS) */
+
+    ePMC_SPATIAL_MULTIPLEX_POWER_SAVE,  /* Spatial Multiplexing Power Save (SMPS) */
+
+    ePMC_UAPSD_MODE_POWER_SAVE,  /* Unscheduled Automatic Power Save Delivery Mode */
+
+    ePMC_STANDBY_MODE_POWER_SAVE,  /* Standby Power Save Mode */
+
+    ePMC_WOWL_MODE_POWER_SAVE  /* Wake-on-Wireless LAN Power Save Mode */
+
+} tPmcPowerSavingMode;
+
+
+
+
+/* Switch states. */
+
+typedef enum ePmcSwitchState
+
+{
+
+    ePMC_SWITCH_OFF,  /* switch off */
+
+    ePMC_SWITCH_ON  /* switch on */
+
+} tPmcSwitchState;
+
+
+
+
+/* Device power states. */
+
+typedef enum ePmcPowerState
+
+{
+
+    ePMC_FULL_POWER,  /* full power */
+
+    ePMC_LOW_POWER,  /* low power */
+
+} tPmcPowerState;
+
+ 
+
+/* PMC states. */
+
+typedef enum ePmcState
+
+{
+
+    STOPPED, /* PMC is stopped */
+
+    FULL_POWER, /* full power */
+
+    LOW_POWER, /* low power */
+
+    REQUEST_IMPS,  /* requesting IMPS */
+
+    IMPS,  /* in IMPS */
+
+    REQUEST_BMPS,  /* requesting BMPS */
+
+    BMPS,  /* in BMPS */
+
+    REQUEST_FULL_POWER,  /* requesting full power */
+
+    REQUEST_START_UAPSD,  /* requesting Start UAPSD */
+
+    REQUEST_STOP_UAPSD,  /* requesting Stop UAPSD */
+
+    UAPSD,           /* in UAPSD */
+
+    REQUEST_STANDBY,  /* requesting standby mode */
+
+    STANDBY,  /* in standby mode */
+
+    REQUEST_ENTER_WOWL, /* requesting enter WOWL */
+
+    REQUEST_EXIT_WOWL,  /* requesting exit WOWL */
+
+    WOWL                /* Chip in WOWL mode */
+
+} tPmcState;
+
+
+/* Which beacons should be forwarded to the host. */
+
+typedef enum ePmcBeaconsToForward
+
+{
+
+    ePMC_NO_BEACONS,  /* none */
+
+    ePMC_BEACONS_WITH_TIM_SET,  /* with TIM set */
+
+    ePMC_BEACONS_WITH_DTIM_SET,  /* with DTIM set */
+
+    ePMC_NTH_BEACON,  /* every Nth beacon */
+
+    ePMC_ALL_BEACONS  /* all beacons */
+
+} tPmcBeaconsToForward;
+
+
+
+
+/* The Spatial Mulitplexing Power Save modes. */
+
+typedef enum ePmcSmpsMode
+
+{
+
+    ePMC_DYNAMIC_SMPS,  /* dynamic SMPS */
+
+    ePMC_STATIC_SMPS  /* static SMPS */
+
+} tPmcSmpsMode;
+
+
+
+
+/* Configuration parameters for Idle Mode Power Save (IMPS). */
+
+typedef struct sPmcImpsConfigParams
+
+{
+
+    tANI_BOOLEAN enterOnAc;  /* FALSE if device should enter IMPS only when host operating
+
+                                on battery power, TRUE if device should enter always */
+
+} tPmcImpsConfigParams, *tpPmcImpsConfigParams;
+
+
+
+
+/* Configuration parameters for Beacon Mode Power Save (BMPS). */
+
+typedef struct sPmcBmpsConfigParams
+
+{
+
+    tANI_BOOLEAN enterOnAc;  /* FALSE if device should enter BMPS only when host operating on
+
+                                battery power, TRUE if device should enter always */
+
+    tANI_U32 txThreshold;  /* transmit rate under which BMPS should be entered (frames / traffic measurement period) */
+
+    tANI_U32 rxThreshold;  /* receive rate under which BMPS should be entered (frames / traffic measurement period) */
+
+    tANI_U32 trafficMeasurePeriod; /* period for BMPS traffic measurement (milliseconds) */
+
+    tANI_U32 bmpsPeriod;  /* amount of time in low power (beacon intervals) */
+
+    tPmcBeaconsToForward forwardBeacons;  /* which beacons should be forwarded to the host */
+
+    tANI_U32 valueOfN;  /* the value of N when forwardBeacons is set to ePMC_NTH_BEACON */
+
+    tANI_BOOLEAN usePsPoll;  /* TRUE if PS-POLL should be used to retrieve frames from AP, FALSE if a
+
+                                null data frame with the PM bit reset should be used */
+
+    tANI_BOOLEAN setPmOnLastFrame; /* TRUE to keep device in BMPS as much as possible, FALSE otherwise, TRUE means:
+
+                                      1) PM bit should be set on last pending transmit data frame
+
+                                      2) null frame with PM bit set should be transmitted after last pending receive
+
+                                         frame has been processed */
+
+    tANI_BOOLEAN enableBeaconEarlyTermination; /* if TRUE, BET feature in RIVA 
+                                      will be enabled, FALSE otherwise, TRUE means:
+                                      RXP will read the beacon header for the 
+                                      TIM bit & discard the rest if set to 0, 
+                                      while in BMPS              */
+    tANI_U8      bcnEarlyTermWakeInterval; /* This specifies how often in terms 
+                                      of LI we will disable BET in order to sync 
+                                      up TSF*/
+
+} tPmcBmpsConfigParams, *tpPmcBmpsConfigParams;
+
+
+
+
+/* Configuration parameters for Spatial Mulitplexing Power Save (SMPS). */
+
+typedef struct sPmcSmpsConfigParams
+
+{
+
+    tPmcSmpsMode mode;  /* mode to use */
+
+    tANI_BOOLEAN enterOnAc;  /* FALSE if device should enter SMPS only when host operating on
+
+                                battery power, TRUE if device should enter always */
+
+} tPmcSmpsConfigParams, *tpPmcSmpsConfigParams;
+
+
+/* Routine definitions. */
+
+extern eHalStatus pmcOpen (tHalHandle hHal);
+
+extern eHalStatus pmcStart (tHalHandle hHal);
+
+extern eHalStatus pmcStop (tHalHandle hHal);
+
+extern eHalStatus pmcClose (tHalHandle hHal );
+
+extern eHalStatus pmcSignalPowerEvent (tHalHandle hHal, tPmcPowerEvent event);
+
+extern eHalStatus pmcSetConfigPowerSave (tHalHandle hHal, tPmcPowerSavingMode psMode, void *pConfigParams);
+
+extern eHalStatus pmcGetConfigPowerSave (tHalHandle hHal, tPmcPowerSavingMode psMode, void *pConfigParams);
+
+extern eHalStatus pmcEnablePowerSave (tHalHandle hHal, tPmcPowerSavingMode psMode);
+
+extern eHalStatus pmcStartAutoBmpsTimer (tHalHandle hHal);
+
+extern eHalStatus pmcStopAutoBmpsTimer (tHalHandle hHal);
+
+extern eHalStatus pmcDisablePowerSave (tHalHandle hHal, tPmcPowerSavingMode psMode);
+
+extern eHalStatus pmcQueryPowerState (tHalHandle hHal, tPmcPowerState *pPowerState, tPmcSwitchState *pHwWlanSwitchState,
+
+                                      tPmcSwitchState *pSwWlanSwitchState);
+
+extern tANI_BOOLEAN pmcIsPowerSaveEnabled (tHalHandle hHal, tPmcPowerSavingMode psMode);
+
+extern eHalStatus pmcRequestFullPower (tHalHandle hHal, void (*callbackRoutine) (void *callbackContext, eHalStatus status),
+
+                                       void *callbackContext, tRequestFullPowerReason fullPowerReason);
+
+extern eHalStatus pmcRequestImps (tHalHandle hHal, tANI_U32 impsPeriod,
+
+                                  void (*callbackRoutine) (void *callbackContext, eHalStatus status),
+
+                                  void *callbackContext);
+
+extern eHalStatus pmcRegisterPowerSaveCheck (tHalHandle hHal, tANI_BOOLEAN (*checkRoutine) (void *checkContext),
+
+                                             void *checkContext);
+
+extern eHalStatus pmcDeregisterPowerSaveCheck (tHalHandle hHal, tANI_BOOLEAN (*checkRoutine) (void *checkContext));
+
+extern void pmcMessageProcessor (tHalHandle hHal, tSirSmeRsp *pMsg);
+
+
+extern eHalStatus pmcRequestBmps (
+
+   tHalHandle hHal,
+
+   void (*callbackRoutine) (void *callbackContext, eHalStatus status),
+
+   void *callbackContext);
+
+
+extern eHalStatus pmcStartUapsd (
+
+   tHalHandle hHal,
+
+   void (*callbackRoutine) (void *callbackContext, eHalStatus status),
+
+   void *callbackContext);
+
+
+extern eHalStatus pmcStopUapsd (tHalHandle hHal);
+
+
+extern eHalStatus pmcRequestStandby (
+
+   tHalHandle hHal,
+
+   void (*callbackRoutine) (void *callbackContext, eHalStatus status),
+
+   void *callbackContext);
+
+
+extern eHalStatus pmcRegisterDeviceStateUpdateInd (tHalHandle hHal, 
+
+   void (*callbackRoutine) (void *callbackContext, tPmcState pmcState),
+
+   void *callbackContext);
+
+
+extern eHalStatus pmcDeregisterDeviceStateUpdateInd (tHalHandle hHal, 
+
+   void (*callbackRoutine) (void *callbackContext, tPmcState pmcState));
+
+
+extern eHalStatus pmcReady(tHalHandle hHal);
+
+
+void pmcDumpInit(tHalHandle hHal);
+
+
+extern eHalStatus pmcWowlAddBcastPattern (
+
+   tHalHandle hHal, 
+
+   tpSirWowlAddBcastPtrn pattern);
+
+
+extern eHalStatus pmcWowlDelBcastPattern (
+
+   tHalHandle hHal, 
+
+   tpSirWowlDelBcastPtrn pattern);
+
+
+extern eHalStatus pmcEnterWowl ( 
+
+    tHalHandle hHal, 
+
+    void (*enterWowlCallbackRoutine) (void *callbackContext, eHalStatus status),
+
+    void *enterWowlCallbackContext,
+#ifdef WLAN_WAKEUP_EVENTS
+    void (*wakeReasonIndCB) (void *callbackContext, tpSirWakeReasonInd pWakeReasonInd),
+
+    void *wakeReasonIndCBContext,
+#endif // WLAN_WAKEUP_EVENTS
+    tpSirSmeWowlEnterParams wowlEnterParams);
+
+extern eHalStatus pmcExitWowl (tHalHandle hHal);
+
+
+extern eHalStatus pmcSetHostOffload (tHalHandle hHal, tpSirHostOffloadReq pRequest);
+
+/* ---------------------------------------------------------------------------
+    \fn pmcSetKeepAlive
+    \brief  Set the Keep Alive feature.
+    \param  hHal - The handle returned by macOpen.
+    \param  pRequest - Pointer to the Keep Alive.
+    \return eHalStatus
+            eHAL_STATUS_FAILURE  Cannot set the keepalive.
+            eHAL_STATUS_SUCCESS  Request accepted. 
+  ---------------------------------------------------------------------------*/
+extern eHalStatus pmcSetKeepAlive (tHalHandle hHal, tpSirKeepAliveReq pRequest);
+
+extern tANI_BOOLEAN pmcValidateConnectState( tHalHandle hHal );
+
+extern tANI_BOOLEAN pmcAllowImps( tHalHandle hHal );
+
+
+#ifdef FEATURE_WLAN_SCAN_PNO
+/*Pref netw found Cb declaration*/
+typedef void(*preferredNetworkFoundIndCallback)(void *callbackContext, tpSirPrefNetworkFoundInd pPrefNetworkFoundInd);
+
+extern eHalStatus pmcSetPreferredNetworkList(tHalHandle hHal, tpSirPNOScanReq pRequest, tANI_U8 sessionId, preferredNetworkFoundIndCallback callbackRoutine, void *callbackContext);
+extern eHalStatus pmcSetRssiFilter(tHalHandle hHal, v_U8_t rssiThreshold);
+#endif // FEATURE_WLAN_SCAN_PNO
+
+#ifdef WLAN_FEATURE_PACKET_FILTERING
+// Packet Coalescing Filter Match Count Callback declaration
+typedef void(*FilterMatchCountCallback)(void *callbackContext,
+                                        tpSirRcvFltPktMatchRsp pRcvFltPktMatchRsp);
+extern eHalStatus pmcGetFilterMatchCount(tHalHandle hHal, FilterMatchCountCallback callbackRoutine, void *callbackContext);
+#endif // WLAN_FEATURE_PACKET_FILTERING
+
+#ifdef WLAN_FEATURE_GTK_OFFLOAD
+// GTK Offload Information Callback declaration
+typedef void(*GTKOffloadGetInfoCallback)(void *callbackContext, tpSirGtkOffloadGetInfoRspParams pGtkOffloadGetInfoRsp);
+
+/* ---------------------------------------------------------------------------
+    \fn pmcSetGTKOffload
+    \brief  Set GTK offload feature.
+    \param  hHal - The handle returned by macOpen.
+    \param  pGtkOffload - Pointer to the GTK offload request.
+    \return eHalStatus
+            eHAL_STATUS_FAILURE  Cannot set the offload.
+            eHAL_STATUS_SUCCESS  Request accepted. 
+  ---------------------------------------------------------------------------*/
+extern eHalStatus pmcSetGTKOffload (tHalHandle hHal, tpSirGtkOffloadParams pGtkOffload);
+
+/* ---------------------------------------------------------------------------
+    \fn pmcGetGTKOffload
+    \brief  Get GTK offload information.
+    \param  hHal - The handle returned by macOpen.
+    \param  callbackRoutine - Pointer to the GTK Offload Get Info response callback routine.
+    \return eHalStatus
+            eHAL_STATUS_FAILURE  Cannot set the offload.
+            eHAL_STATUS_SUCCESS  Request accepted. 
+  ---------------------------------------------------------------------------*/
+extern eHalStatus pmcGetGTKOffload (tHalHandle hHal, GTKOffloadGetInfoCallback callbackRoutine, void *callbackContext);
+#endif // WLAN_FEATURE_GTK_OFFLOAD
+
+#endif
+