wlan: add extra debugging when DXE channel error is detected
When DXE channel error is detected the driver issues SSR, and
if SSR is enabled the system wont panic and we will not get
the ram-dumps for static analysis, so add some extra debug logs
when DXE error is detected these logs will vary from error to
error and will help to collect relevant debugging information
Change-Id: I5f1f389ac45aa24a8b8d8e514cf3e40367fa6828
CRs-Fixed: 629354
diff --git a/CORE/DXE/src/wlan_qct_dxe_i.h b/CORE/DXE/src/wlan_qct_dxe_i.h
index 79a9b29..15926cf 100644
--- a/CORE/DXE/src/wlan_qct_dxe_i.h
+++ b/CORE/DXE/src/wlan_qct_dxe_i.h
@@ -386,6 +386,8 @@
#define WLANDXE_CH_STAT_INT_DONE_MASK 0x00008000
#define WLANDXE_CH_STAT_INT_ERR_MASK 0x00004000
#define WLANDXE_CH_STAT_INT_ED_MASK 0x00002000
+#define WLANDXE_CH_STAT_ERR_CODE_MASK 0x000007c0
+#define WLANDXE_CH_STAT_ERR_CODE_OFFSET (6)
#define WLANDXE_CH_STAT_MASKED_MASK 0x00000008
#define WLANDXE_CH_STAT_ENABLED_MASK 0x00000001
@@ -404,6 +406,37 @@
#define WLANDXE_TX_LOW_RES_THRESHOLD (5)
+typedef enum {
+ WLANDXE_ERROR_NONE = 0,
+ WLANDXE_ERROR_SAHB_ERR = 1,
+ WLANDXE_ERROR_H2H_RD_BUS_ERR = 2,
+ WLANDXE_ERROR_H2H_WR_BUS_ERR = 3,
+ WLANDXE_ERROR_PRG_INV_XTYPE = 4,
+ WLANDXE_ERROR_BERR_POPWQ = 5,
+ WLANDXE_ERROR_BERR_PUSHWQ = 6,
+ WLANDXE_ERROR_BERR_RLSS = 7,
+ WLANDXE_ERROR_BERR_GETPDU = 8,
+ WLANDXE_ERROR_PRG_INV_WQ = 9,
+ WLANDXE_ERROR_PRG_INV_H2H_SRC_QID = 10,
+ WLANDXE_ERROR_PRG_INV_H2H_DST_QID = 11,
+ WLANDXE_ERROR_PRG_INV_B2H_SRC_QID = 12,
+ WLANDXE_ERROR_PRG_INV_B2H_DST_QID = 13,
+ WLANDXE_ERROR_PRG_INV_B2H_SRC_IDX = 14,
+ WLANDXE_ERROR_PRG_INV_H2B_SRC_QID = 15,
+ WLANDXE_ERROR_PRG_INV_H2B_DST_QID = 16,
+ WLANDXE_ERROR_PRG_INV_H2B_DST_IDX = 17,
+ WLANDXE_ERROR_PRG_INV_H2B_SZ = 18,
+ WLANDXE_ERROR_PRG_INV_SADR = 19,
+ WLANDXE_ERROR_PRG_INV_DADR = 20,
+ WLANDXE_ERROR_PRG_INV_EDADR = 21,
+ WLANDXE_ERROR_PRG_INV_SRC_WQID = 22,
+ WLANDXE_ERROR_PRG_INV_DST_WQID = 23,
+ WLANDXE_ERROR_PRG_XTYPE_MSMTCH = 24,
+ WLANDXE_ERROR_PKT_ERR = 25,
+ WLANDXE_ERROR_ABORT = 26,
+ WLANDXE_ERROR_PDU_CNT_OVFL = 27,
+}WLANDXE_ErrorCode;
+
/* DXE Descriptor Endian swap macro */
#ifdef WLANDXE_ENDIAN_SWAP_ENABLE
#define WLANDXE_U32_SWAP_ENDIAN(a) (((a & 0x000000FF) << 24) | \