/*
 * Copyright (c) 2012, Code Aurora Forum. All rights reserved.
 *
 * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
 *
 *
 * Permission to use, copy, modify, and/or distribute this software for
 * any purpose with or without fee is hereby granted, provided that the
 * above copyright notice and this permission notice appear in all
 * copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
 * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
 * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
 * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
 * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 * PERFORMANCE OF THIS SOFTWARE.
 */

/*========================================================================

  \file  wlan_hdd_main.c

  \brief WLAN Host Device Driver implementation

   Copyright 2008 (c) Qualcomm, Incorporated.  All Rights Reserved.

   Qualcomm Confidential and Proprietary.

  ========================================================================*/

/**=========================================================================

                       EDIT HISTORY FOR FILE


  This section contains comments describing changes made to the module.
  Notice that changes are listed in reverse chronological order.


  $Header:$   $DateTime: $ $Author: $


  when        who    what, where, why
  --------    ---    --------------------------------------------------------
  04/5/09     Shailender     Created module.
  02/24/10    Sudhir.S.Kohalli  Added to support param for SoftAP module
  06/03/10    js - Added support to hostapd driven deauth/disassoc/mic failure
  ==========================================================================*/

/*--------------------------------------------------------------------------
  Include Files
  ------------------------------------------------------------------------*/
//#include <wlan_qct_driver.h>
#include <wlan_hdd_includes.h>
#ifdef ANI_BUS_TYPE_SDIO
#include <wlan_sal_misc.h>
#endif // ANI_BUS_TYPE_SDIO
#include <vos_api.h>
#include <vos_sched.h>
#include <vos_power.h>
#include <linux/etherdevice.h>
#include <linux/firmware.h>
#ifdef ANI_BUS_TYPE_SDIO
#include <linux/mmc/sdio_func.h>
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,32))
// added in 2.6.32, need to define locally if using an earlier kernel
#define dev_to_sdio_func(d)      container_of(d, struct sdio_func, dev)
#endif
#endif // ANI_BUS_TYPE_SDIO
#ifdef ANI_BUS_TYPE_PLATFORM
#include <linux/wcnss_wlan.h>
#endif //ANI_BUS_TYPE_PLATFORM
#ifdef ANI_BUS_TYPE_PCI
#include "wcnss_wlan.h"
#endif /* ANI_BUS_TYPE_PCI */
#include <wlan_hdd_tx_rx.h>
#include <palTimer.h>
#include <wniApi.h>
#include <wlan_nlink_srv.h>
#include <wlan_btc_svc.h>
#include <wlan_hdd_cfg.h>
#include <wlan_ptt_sock_svc.h>
#include <wlan_hdd_wowl.h>
#include <wlan_hdd_misc.h>
#include <wlan_hdd_wext.h>
#ifdef WLAN_BTAMP_FEATURE
#include <bap_hdd_main.h>
#include <bapInternal.h>
#endif // WLAN_BTAMP_FEATURE

#ifdef CONFIG_CFG80211
#include <linux/wireless.h>
#include <net/cfg80211.h>
#include "wlan_hdd_cfg80211.h"
#include "wlan_hdd_p2p.h"
#endif
#include <linux/rtnetlink.h>
#ifdef ANI_MANF_DIAG
int wlan_hdd_ftm_start(hdd_context_t *pAdapter);
#endif
#ifdef WLAN_SOFTAP_FEATURE
#include "sapApi.h"
#include <linux/semaphore.h>
#include <mach/subsystem_restart.h>
#include <wlan_hdd_hostapd.h>
#include <wlan_hdd_softap_tx_rx.h>
#endif
#ifdef FEATURE_WLAN_INTEGRATED_SOC
#include "cfgApi.h"
#endif
#include "wlan_hdd_dev_pwr.h"
#ifdef WLAN_BTAMP_FEATURE
#include "bap_hdd_misc.h"
#endif
#ifdef FEATURE_WLAN_INTEGRATED_SOC
#include "wlan_qct_pal_trace.h"
#endif /* FEATURE_WLAN_INTEGRATED_SOC */
#include "qwlan_version.h"

#ifdef MODULE
#define WLAN_MODULE_NAME  module_name(THIS_MODULE)
#else
#define WLAN_MODULE_NAME  "wlan"
#endif

#ifdef TIMER_MANAGER
#define TIMER_MANAGER_STR " +TIMER_MANAGER"
#else
#define TIMER_MANAGER_STR ""
#endif

#ifdef MEMORY_DEBUG
#define MEMORY_DEBUG_STR " +MEMORY_DEBUG"
#else
#define MEMORY_DEBUG_STR ""
#endif

/* the Android framework expects this param even though we don't use it */
#define BUF_LEN 20
static char fwpath[BUF_LEN];
module_param_string(fwpath, fwpath, BUF_LEN,
                    S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);

/*
 * The rate at which the driver sends RESTART event to supplicant
 * once the function 'vos_wlanRestart()' is called
 *
 */
#define WLAN_HDD_RESTART_RETRY_DELAY_MS 5000  /* 5 second */
#define WLAN_HDD_RESTART_RETRY_MAX_CNT  5     /* 5 retries */
#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,4,5))
static struct wake_lock wlan_wake_lock;
#endif
/* set when SSR is needed after unload */
static v_U8_t      isSsrRequired;

//internal function declaration
static VOS_STATUS wlan_hdd_framework_restart(hdd_context_t *pHddCtx);
static void wlan_hdd_restart_init(hdd_context_t *pHddCtx);
static void wlan_hdd_restart_deinit(hdd_context_t *pHddCtx);
void wlan_hdd_restart_timer_cb(v_PVOID_t usrDataForCallback);

v_U16_t hdd_select_queue(struct net_device *dev,
    struct sk_buff *skb);

#ifdef WLAN_FEATURE_PACKET_FILTERING
static void hdd_set_multicast_list(struct net_device *dev);
#endif

void hdd_wlan_initial_scan(hdd_adapter_t *pAdapter);

extern int hdd_setBand_helper(struct net_device *dev, tANI_U8* ptr);

static int hdd_netdev_notifier_call(struct notifier_block * nb,
                                         unsigned long state,
                                         void *ndev)
{
   struct net_device *dev = ndev;
   hdd_adapter_t *pAdapter = NULL;
#ifdef WLAN_BTAMP_FEATURE
   VOS_STATUS status;
   hdd_context_t *pHddCtx;
#endif

   //Make sure that this callback corresponds to our device.
   if((strncmp( dev->name, "wlan", 4 )) && 
      (strncmp( dev->name, "p2p", 3))
     )
      return NOTIFY_DONE;

#ifdef CONFIG_CFG80211
   if (!dev->ieee80211_ptr)
       return NOTIFY_DONE;
#endif

   pAdapter = WLAN_HDD_GET_PRIV_PTR(dev);

   if(NULL == pAdapter)
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: HDD Adaptor Null Pointer", __func__);
      VOS_ASSERT(0);
      return NOTIFY_DONE;
   }

   hddLog(VOS_TRACE_LEVEL_INFO,"%s: New Net Device State = %lu", __func__, state);

   switch (state) {
   case NETDEV_REGISTER:
        break;

   case NETDEV_UNREGISTER:
        break;

   case NETDEV_UP:
        break;

   case NETDEV_DOWN:
        break;

   case NETDEV_CHANGE:
        if(TRUE == pAdapter->isLinkUpSvcNeeded)
           complete(&pAdapter->linkup_event_var);
        break;

   case NETDEV_GOING_DOWN:
        if( pAdapter->scan_info.mScanPending != FALSE )
        { 
           int result;
           INIT_COMPLETION(pAdapter->abortscan_event_var);
           hdd_abort_mac_scan(pAdapter->pHddCtx);
           result = wait_for_completion_interruptible_timeout(
                               &pAdapter->abortscan_event_var,
                               msecs_to_jiffies(WLAN_WAIT_TIME_ABORTSCAN));
           if(!result)
           {
              VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_ERROR,
                         "%s: Timeout occured while waiting for abortscan" ,
                          __FUNCTION__);
           }
        }
        else
        {
           VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_INFO,
               "%s: Scan is not Pending from user" , __FUNCTION__);
        }
#ifdef WLAN_BTAMP_FEATURE
        VOS_TRACE(VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_INFO,"%s: disabling AMP", __FUNCTION__);
        pHddCtx = WLAN_HDD_GET_CTX( pAdapter );
        status = WLANBAP_StopAmp();
        if(VOS_STATUS_SUCCESS != status )
        {
           pHddCtx->isAmpAllowed = VOS_TRUE;
           hddLog(VOS_TRACE_LEVEL_FATAL,
                  "%s: Failed to stop AMP", __func__);
        }
        else
        {
           //a state m/c implementation in PAL is TBD to avoid this delay
           msleep(500);
           if ( pHddCtx->isAmpAllowed )
           {
                WLANBAP_DeregisterFromHCI();
                pHddCtx->isAmpAllowed = VOS_FALSE;
           }
        }
#endif //WLAN_BTAMP_FEATURE
        break;

   default:
        break;
   }

   return NOTIFY_DONE;
}

struct notifier_block hdd_netdev_notifier = {
   .notifier_call = hdd_netdev_notifier_call,
};

/*---------------------------------------------------------------------------
 *   Function definitions
 *-------------------------------------------------------------------------*/
extern int isWDresetInProgress(void);
#ifdef CONFIG_HAS_EARLYSUSPEND
extern void register_wlan_suspend(void);
extern void unregister_wlan_suspend(void);
void hdd_unregister_mcast_bcast_filter(hdd_context_t *pHddCtx);
void hdd_register_mcast_bcast_filter(hdd_context_t *pHddCtx);
#endif
#ifdef WLAN_SOFTAP_FEATURE
//variable to hold the insmod parameters
static int con_mode = 0;
#endif

#ifdef FEATURE_WLAN_INTEGRATED_SOC
/**---------------------------------------------------------------------------

  \brief hdd_wdi_trace_enable() - Configure initial WDI Trace enable

  Called immediately after the cfg.ini is read in order to configure
  the desired trace levels in the WDI.

  \param  - moduleId - module whose trace level is being configured
  \param  - bitmask - bitmask of log levels to be enabled

  \return - void

  --------------------------------------------------------------------------*/
static void hdd_wdi_trace_enable(wpt_moduleid moduleId, v_U32_t bitmask)
{
   wpt_tracelevel level;

   /* if the bitmask is the default value, then a bitmask was not
      specified in cfg.ini, so leave the logging level alone (it
      will remain at the "compiled in" default value) */
   if (CFG_WDI_TRACE_ENABLE_DEFAULT == bitmask)
   {
      return;
   }

   /* a mask was specified.  start by disabling all logging */
   wpalTraceSetLevel(moduleId, eWLAN_PAL_TRACE_LEVEL_NONE, 0);

   /* now cycle through the bitmask until all "set" bits are serviced */
   level = eWLAN_PAL_TRACE_LEVEL_FATAL;
   while (0 != bitmask)
   {
      if (bitmask & 1)
      {
         wpalTraceSetLevel(moduleId, level, 1);
      }
      level++;
      bitmask >>= 1;
   }
}
#endif /* FEATURE_WLAN_INTEGRATED_SOC */

int hdd_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
   hdd_adapter_t *pAdapter = WLAN_HDD_GET_PRIV_PTR(dev);
   hdd_priv_data_t priv_data;
   tANI_U8 *command = NULL;
   int ret = 0;

   if (NULL == pAdapter)
   {
      VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_FATAL,
         "%s: HDD adapter context is Null", __FUNCTION__);
      ret = -ENODEV;
      goto exit; 
   }

   if ((!ifr) || (!ifr->ifr_data))
   {
       ret = -EINVAL;
       goto exit; 
   }

   if (copy_from_user(&priv_data, ifr->ifr_data, sizeof(hdd_priv_data_t)))
   {
       ret = -EFAULT;
       goto exit;
   }

   command = kmalloc(priv_data.total_len, GFP_KERNEL);
   if (!command)
   {
       VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_FATAL,
          "%s: failed to allocate memory\n", __FUNCTION__);
       ret = -ENOMEM;
       goto exit;
   }

   if (copy_from_user(command, priv_data.buf, priv_data.total_len))
   {
       ret = -EFAULT;
       goto exit;
   }

   if ((SIOCDEVPRIVATE + 1) == cmd)
   {
       hdd_context_t *pHddCtx = (hdd_context_t*)pAdapter->pHddCtx;

       VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_INFO,
                   "***Received %s cmd from Wi-Fi GUI***", command);

       if (strncmp(command, "P2P_DEV_ADDR", 12) == 0 )
       {
           if (copy_to_user(priv_data.buf, pHddCtx->p2pDeviceAddress.bytes,
                                                           sizeof(tSirMacAddr)))
           {
               VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_FATAL,
                  "%s: failed to copy data to user buffer\n", __FUNCTION__);
               ret = -EFAULT;
           }
       }
       if(strncmp(priv_data.buf, "SETBAND", 7) == 0)
       {
           tANI_U8 *ptr = (tANI_U8*)priv_data.buf ;
           int ret = 0 ;
        
           /* Change band request received */
   
           /* First 8 bytes will have "SETBAND " and 
            * 9 byte will have band setting value */
           VOS_TRACE(VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_ERROR,
                    "%s: SetBandCommand Info  comm %s UL %d, TL %d", __FUNCTION__, priv_data.buf, priv_data.used_len, priv_data.total_len);
        
           /* Change band request received */
           ret = hdd_setBand_helper(dev, ptr);   
       } 
   }
exit:
   if (command)
   {
       kfree(command);
   }
   return ret;
}

/**---------------------------------------------------------------------------

  \brief hdd_open() - HDD Open function

  This is called in response to ifconfig up

  \param  - dev Pointer to net_device structure

  \return - 0 for success non-zero for failure

  --------------------------------------------------------------------------*/
int hdd_open (struct net_device *dev)
{
   hdd_adapter_t *pAdapter = WLAN_HDD_GET_PRIV_PTR(dev);
   hdd_context_t *pHddCtx;
   hdd_adapter_list_node_t *pAdapterNode = NULL, *pNext = NULL;
   VOS_STATUS status;
   v_BOOL_t in_standby = TRUE;

   if (NULL == pAdapter) 
   {
      VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_FATAL,
         "%s: HDD adapter context is Null", __FUNCTION__);
      return -ENODEV;
   }
   
   pHddCtx = (hdd_context_t*)pAdapter->pHddCtx;
   if (NULL == pHddCtx)
   {
      VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_FATAL,
         "%s: HDD context is Null", __FUNCTION__);
      return -ENODEV;
   }

   status = hdd_get_front_adapter ( pHddCtx, &pAdapterNode );
   while ( (NULL != pAdapterNode) && (VOS_STATUS_SUCCESS == status) )
   {
        if( pAdapterNode->pAdapter->event_flags & DEVICE_IFACE_OPENED)
        {
            hddLog(VOS_TRACE_LEVEL_INFO, "%s: chip already out of " 
                  "standby", __func__, pAdapter->device_mode);
            in_standby = FALSE;
            break;
        }
        else
        {
            status = hdd_get_next_adapter ( pHddCtx, pAdapterNode, &pNext );
            pAdapterNode = pNext;
        }
   }
 
   if (TRUE == in_standby)
   {
       if (VOS_STATUS_SUCCESS != wlan_hdd_exit_lowpower(pHddCtx, pAdapter))
       {
           hddLog(VOS_TRACE_LEVEL_ERROR, "%s: Failed to bring " 
                   "wlan out of power save", __func__);
           return -EINVAL;
       }
   }
   
   pAdapter->event_flags |= DEVICE_IFACE_OPENED;
   if (hdd_connIsConnected(WLAN_HDD_GET_STATION_CTX_PTR(pAdapter))) 
   {
       VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_INFO,
                 "%s: Enabling Tx Queues", __FUNCTION__);
       /* Enable TX queues only when we are connected */
       netif_tx_start_all_queues(dev);
   }

   return 0;
}

int hdd_mon_open (struct net_device *dev)
{
   hdd_adapter_t *pAdapter = WLAN_HDD_GET_PRIV_PTR(dev);

   if(pAdapter == NULL) {
      VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_FATAL,
         "%s: HDD adapter context is Null", __FUNCTION__);
      return -1;
   }

   netif_start_queue(dev);

   return 0;
}
/**---------------------------------------------------------------------------

  \brief hdd_stop() - HDD stop function

  This is called in response to ifconfig down

  \param  - dev Pointer to net_device structure

  \return - 0 for success non-zero for failure

  --------------------------------------------------------------------------*/

int hdd_stop (struct net_device *dev)
{
   hdd_adapter_t *pAdapter = WLAN_HDD_GET_PRIV_PTR(dev);
   hdd_context_t *pHddCtx;
   hdd_adapter_list_node_t *pAdapterNode = NULL, *pNext = NULL;
   VOS_STATUS status;
   v_BOOL_t enter_standby = TRUE;
   
   ENTER();

   if (NULL == pAdapter)
   {
      VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_FATAL,
         "%s: HDD adapter context is Null", __FUNCTION__);
      return -ENODEV;
   }

   pHddCtx = (hdd_context_t*)pAdapter->pHddCtx;
   if (NULL == pHddCtx)
   {
      VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_FATAL,
         "%s: HDD context is Null", __FUNCTION__);
      return -ENODEV;
   }

   pAdapter->event_flags &= ~(DEVICE_IFACE_OPENED);
   hddLog(VOS_TRACE_LEVEL_INFO, "%s: Disabling OS Tx queues", __func__);
   netif_tx_disable(pAdapter->dev);
   netif_carrier_off(pAdapter->dev);


   /* SoftAP ifaces should never go in power save mode
      making sure same here. */
   if ( (WLAN_HDD_SOFTAP == pAdapter->device_mode )
                 || (WLAN_HDD_MONITOR == pAdapter->device_mode )
#ifdef WLAN_FEATURE_P2P
                 || (WLAN_HDD_P2P_GO == pAdapter->device_mode )
#endif
      )
   {
      /* SoftAP mode, so return from here */
      EXIT();
      return 0;
   }

   /* Find if any iface is up then
      if any iface is up then can't put device to sleep/ power save mode. */
   status = hdd_get_front_adapter ( pHddCtx, &pAdapterNode );
   while ( (NULL != pAdapterNode) && (VOS_STATUS_SUCCESS == status) )
   {
        if ( pAdapterNode->pAdapter->event_flags & DEVICE_IFACE_OPENED)
        {
            hddLog(VOS_TRACE_LEVEL_INFO, "%s: Still other ifaces are up cannot "
                   "put device to sleep", __func__, pAdapter->device_mode);
            enter_standby = FALSE;
            break;
        }
        else
        { 
            status = hdd_get_next_adapter ( pHddCtx, pAdapterNode, &pNext );
            pAdapterNode = pNext;
        }
   }

   if (TRUE == enter_standby)
   {
       hddLog(VOS_TRACE_LEVEL_INFO, "%s: All Interfaces are Down " 
                 "entering standby", __func__);
       if (VOS_STATUS_SUCCESS != wlan_hdd_enter_lowpower(pHddCtx))
       {
           /*log and return success*/
           hddLog(VOS_TRACE_LEVEL_ERROR, "%s: Failed to put "
                   "wlan in power save", __func__);
       }
   }
   
   EXIT();
   return 0;
}

/**---------------------------------------------------------------------------

  \brief hdd_uninit() - HDD uninit function

  This is called during the netdev unregister to uninitialize all data
associated with the device

  \param  - dev Pointer to net_device structure

  \return - void

  --------------------------------------------------------------------------*/
static void hdd_uninit (struct net_device *dev)
{
   hdd_adapter_t *pAdapter = WLAN_HDD_GET_PRIV_PTR(dev);

   ENTER();

   do
   {
      if (NULL == pAdapter)
      {
         hddLog(VOS_TRACE_LEVEL_FATAL,
                "%s: NULL pAdapter", __func__);
         break;
      }

      if (WLAN_HDD_ADAPTER_MAGIC != pAdapter->magic)
      {
         hddLog(VOS_TRACE_LEVEL_FATAL,
                "%s: Invalid magic", __func__);
         break;
      }

      if (NULL == pAdapter->pHddCtx)
      {
         hddLog(VOS_TRACE_LEVEL_FATAL,
                "%s: NULL pHddCtx", __func__);
         break;
      }

      if (dev != pAdapter->dev)
      {
         hddLog(VOS_TRACE_LEVEL_FATAL,
                "%s: Invalid device reference", __func__);
         /* we haven't validated all cases so let this go for now */
      }

      hdd_deinit_adapter(pAdapter->pHddCtx, pAdapter);

      /* after uninit our adapter structure will no longer be valid */
      pAdapter->dev = NULL;
      pAdapter->magic = 0;
   } while (0);

   EXIT();
}

/**---------------------------------------------------------------------------

  \brief hdd_release_firmware() -

   This function calls the release firmware API to free the firmware buffer.

  \param  - pFileName Pointer to the File Name.
                  pCtx - Pointer to the adapter .


  \return - 0 for success, non zero for failure

  --------------------------------------------------------------------------*/

VOS_STATUS hdd_release_firmware(char *pFileName,v_VOID_t *pCtx)
{
   VOS_STATUS status = VOS_STATUS_SUCCESS;
   hdd_context_t *pHddCtx = (hdd_context_t*)pCtx;
   ENTER();


   if (!strcmp(WLAN_FW_FILE, pFileName)) {
   
       hddLog(VOS_TRACE_LEVEL_INFO_HIGH,"%s: Loaded firmware file is %s",__func__,pFileName);

       if(pHddCtx->fw) {
          release_firmware(pHddCtx->fw);
          pHddCtx->fw = NULL;
       }
       else
          status = VOS_STATUS_E_FAILURE;
   }
   else if (!strcmp(WLAN_NV_FILE,pFileName)) {
       if(pHddCtx->nv) {
          release_firmware(pHddCtx->nv);
          pHddCtx->nv = NULL;
       }
       else
          status = VOS_STATUS_E_FAILURE;

   }

   EXIT();
   return status;
}

/**---------------------------------------------------------------------------

  \brief hdd_request_firmware() -

   This function reads the firmware file using the request firmware
   API and returns the the firmware data and the firmware file size.

  \param  - pfileName - Pointer to the file name.
              - pCtx - Pointer to the adapter .
              - ppfw_data - Pointer to the pointer of the firmware data.
              - pSize - Pointer to the file size.

  \return - VOS_STATUS_SUCCESS for success, VOS_STATUS_E_FAILURE for failure

  --------------------------------------------------------------------------*/


VOS_STATUS hdd_request_firmware(char *pfileName,v_VOID_t *pCtx,v_VOID_t **ppfw_data, v_SIZE_t *pSize)
{
   int status;
   VOS_STATUS retval = VOS_STATUS_SUCCESS;
   hdd_context_t *pHddCtx = (hdd_context_t*)pCtx;
   ENTER();

   if( (!strcmp(WLAN_FW_FILE, pfileName)) ) {

       status = request_firmware(&pHddCtx->fw, pfileName, pHddCtx->parent_dev);

       if(status || !pHddCtx->fw || !pHddCtx->fw->data) {
           hddLog(VOS_TRACE_LEVEL_FATAL, "%s: Firmware %s download failed",
                  __func__, pfileName);
           retval = VOS_STATUS_E_FAILURE;
       }

       else {
         *ppfw_data = (v_VOID_t *)pHddCtx->fw->data;
         *pSize = pHddCtx->fw->size;
          hddLog(VOS_TRACE_LEVEL_INFO, "%s: Firmware size = %d",
                 __func__, *pSize);
       }
   }
   else if(!strcmp(WLAN_NV_FILE, pfileName)) {

       status = request_firmware(&pHddCtx->nv, pfileName, pHddCtx->parent_dev);

       if(status || !pHddCtx->nv || !pHddCtx->nv->data) {
           hddLog(VOS_TRACE_LEVEL_FATAL, "%s: nv %s download failed",
                  __func__, pfileName);
           retval = VOS_STATUS_E_FAILURE;
       }

       else {
         *ppfw_data = (v_VOID_t *)pHddCtx->nv->data;
         *pSize = pHddCtx->nv->size;
          hddLog(VOS_TRACE_LEVEL_INFO, "%s: nv file size = %d",
                 __func__, *pSize);
       }
   }

   EXIT();
   return retval;
}
/**---------------------------------------------------------------------------
     \brief hdd_full_pwr_cbk() - HDD full power callbackfunction

      This is the function invoked by SME to inform the result of a full power
      request issued by HDD

     \param  - callbackcontext - Pointer to cookie
               status - result of request

     \return - None

--------------------------------------------------------------------------*/
void hdd_full_pwr_cbk(void *callbackContext, eHalStatus status)
{
   hdd_context_t *pHddCtx = (hdd_context_t*)callbackContext;

   hddLog(VOS_TRACE_LEVEL_ERROR,"HDD full Power callback status = %d", status);
   if(&pHddCtx->full_pwr_comp_var)
   {
      complete(&pHddCtx->full_pwr_comp_var);
   }
}

/**---------------------------------------------------------------------------

    \brief hdd_req_bmps_cbk() - HDD Request BMPS callback function

     This is the function invoked by SME to inform the result of BMPS
     request issued by HDD

    \param  - callbackcontext - Pointer to cookie
               status - result of request

    \return - None

--------------------------------------------------------------------------*/
void hdd_req_bmps_cbk(void *callbackContext, eHalStatus status)
{

   struct completion *completion_var = (struct completion*) callbackContext;

   hddLog(VOS_TRACE_LEVEL_ERROR, "HDD BMPS request Callback, status = %d\n", status);
   if(completion_var != NULL)
   {
      complete(completion_var);
   }
}

/**---------------------------------------------------------------------------

  \brief hdd_get_cfg_file_size() -

   This function reads the configuration file using the request firmware
   API and returns the configuration file size.

  \param  - pCtx - Pointer to the adapter .
              - pFileName - Pointer to the file name.
              - pBufSize - Pointer to the buffer size.

  \return - 0 for success, non zero for failure

  --------------------------------------------------------------------------*/

VOS_STATUS hdd_get_cfg_file_size(v_VOID_t *pCtx, char *pFileName, v_SIZE_t *pBufSize)
{
   int status;
   hdd_context_t *pHddCtx = (hdd_context_t*)pCtx;

   ENTER();

   status = request_firmware(&pHddCtx->fw, pFileName, pHddCtx->parent_dev);

   if(status || !pHddCtx->fw || !pHddCtx->fw->data) {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: CFG download failed",__func__);
      status = VOS_STATUS_E_FAILURE;
   }
   else {
      *pBufSize = pHddCtx->fw->size;
      hddLog(VOS_TRACE_LEVEL_INFO, "%s: CFG size = %d", __func__, *pBufSize);
      release_firmware(pHddCtx->fw);
      pHddCtx->fw = NULL;
   }

   EXIT();
   return VOS_STATUS_SUCCESS;
}

/**---------------------------------------------------------------------------

  \brief hdd_read_cfg_file() -

   This function reads the configuration file using the request firmware
   API and returns the cfg data and the buffer size of the configuration file.

  \param  - pCtx - Pointer to the adapter .
              - pFileName - Pointer to the file name.
              - pBuffer - Pointer to the data buffer.
              - pBufSize - Pointer to the buffer size.

  \return - 0 for success, non zero for failure

  --------------------------------------------------------------------------*/

VOS_STATUS hdd_read_cfg_file(v_VOID_t *pCtx, char *pFileName,
    v_VOID_t *pBuffer, v_SIZE_t *pBufSize)
{
   int status;
   hdd_context_t *pHddCtx = (hdd_context_t*)pCtx;

   ENTER();

   status = request_firmware(&pHddCtx->fw, pFileName, pHddCtx->parent_dev);

   if(status || !pHddCtx->fw || !pHddCtx->fw->data) {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: CFG download failed",__func__);
      return VOS_STATUS_E_FAILURE;
   }
   else {
      if(*pBufSize != pHddCtx->fw->size) {
         hddLog(VOS_TRACE_LEVEL_ERROR, "%s: Caller sets invalid CFG "
             "file size", __func__);
         release_firmware(pHddCtx->fw);
         pHddCtx->fw = NULL;
         return VOS_STATUS_E_FAILURE;
      }
        else {
         if(pBuffer) {
            vos_mem_copy(pBuffer,pHddCtx->fw->data,*pBufSize);
         }
         release_firmware(pHddCtx->fw);
         pHddCtx->fw = NULL;
        }
   }

   EXIT();

   return VOS_STATUS_SUCCESS;
}

/**---------------------------------------------------------------------------

  \brief hdd_set_mac_addr_cb() -

   This function is the call back function for setting the station
   mac adrress called by ccm module to indicate the
   success/failure result.

  \param  - hHal - Pointer to the hal module.
              - result - returns the result of the set mac address.

  \return - void

  --------------------------------------------------------------------------*/
#ifndef FEATURE_WLAN_INTEGRATED_SOC
static void hdd_set_mac_addr_cb( tHalHandle hHal, tANI_S32 result )
{
  // ignore the STA_ID response for now.

  VOS_ASSERT( CCM_IS_RESULT_SUCCESS( result ) );
}
#endif


/**---------------------------------------------------------------------------

  \brief hdd_set_mac_address() -

   This function sets the user specified mac address using
   the command ifconfig wlanX hw ether <mac adress>.

  \param  - dev - Pointer to the net device.
              - addr - Pointer to the sockaddr.
  \return - 0 for success, non zero for failure

  --------------------------------------------------------------------------*/

static int hdd_set_mac_address(struct net_device *dev, void *addr)
{
   hdd_adapter_t *pAdapter = WLAN_HDD_GET_PRIV_PTR(dev);
   struct sockaddr *psta_mac_addr = addr;
   eHalStatus halStatus = eHAL_STATUS_SUCCESS;

   ENTER();

   memcpy(&pAdapter->macAddressCurrent, psta_mac_addr->sa_data, ETH_ALEN);

#ifdef HDD_SESSIONIZE 
   // set the MAC address though the STA ID CFG.
   halStatus = ccmCfgSetStr( pAdapter->hHal, WNI_CFG_STA_ID,
                             (v_U8_t *)&pAdapter->macAddressCurrent,
                             sizeof( pAdapter->macAddressCurrent ),
                             hdd_set_mac_addr_cb, VOS_FALSE );
#endif

   memcpy(dev->dev_addr, psta_mac_addr->sa_data, ETH_ALEN);

   EXIT();
   return halStatus;
}

tANI_U8* wlan_hdd_get_intf_addr(hdd_context_t* pHddCtx)
{
   int i;
   for ( i = 0; i < VOS_MAX_CONCURRENCY_PERSONA; i++)
   {
      if( 0 == (pHddCtx->cfg_ini->intfAddrMask >> i))
         break;
   }

   if( VOS_MAX_CONCURRENCY_PERSONA == i)
      return NULL;

   pHddCtx->cfg_ini->intfAddrMask |= (1 << i);
   return &pHddCtx->cfg_ini->intfMacAddr[i].bytes[0];
}

void wlan_hdd_release_intf_addr(hdd_context_t* pHddCtx, tANI_U8* releaseAddr)
{
   int i;
   for ( i = 0; i < VOS_MAX_CONCURRENCY_PERSONA; i++)
   {
      if ( !memcmp(releaseAddr, &pHddCtx->cfg_ini->intfMacAddr[i].bytes[0], 6) )
      {
         pHddCtx->cfg_ini->intfAddrMask &= ~(1 << i);
         break;
      } 
   }
   return;
}

#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,29))
  static struct net_device_ops wlan_drv_ops = {
      .ndo_open = hdd_open,
      .ndo_stop = hdd_stop,
      .ndo_uninit = hdd_uninit,
      .ndo_start_xmit = hdd_hard_start_xmit,
      .ndo_tx_timeout = hdd_tx_timeout,
      .ndo_get_stats = hdd_stats,
      .ndo_do_ioctl = hdd_ioctl,
      .ndo_set_mac_address = hdd_set_mac_address,
      .ndo_select_queue    = hdd_select_queue,
#ifdef WLAN_FEATURE_PACKET_FILTERING
#if (LINUX_VERSION_CODE > KERNEL_VERSION(3,1,0))
      .ndo_set_rx_mode = hdd_set_multicast_list,
#else
      .ndo_set_multicast_list = hdd_set_multicast_list,
#endif //LINUX_VERSION_CODE
#endif
 };
#ifdef CONFIG_CFG80211   
 static struct net_device_ops wlan_mon_drv_ops = {
      .ndo_open = hdd_mon_open,
      .ndo_stop = hdd_stop,
      .ndo_uninit = hdd_uninit,
      .ndo_start_xmit = hdd_mon_hard_start_xmit,  
      .ndo_tx_timeout = hdd_tx_timeout,
      .ndo_get_stats = hdd_stats,
      .ndo_do_ioctl = hdd_ioctl,
      .ndo_set_mac_address = hdd_set_mac_address,
 };
#endif

#endif

void hdd_set_station_ops( struct net_device *pWlanDev )
{
#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,29))
      pWlanDev->tx_queue_len = NET_DEV_TX_QUEUE_LEN,
      pWlanDev->netdev_ops = &wlan_drv_ops;
#else
      pWlanDev->open = hdd_open;
      pWlanDev->stop = hdd_stop;
      pWlanDev->uninit = hdd_uninit;
      pWlanDev->hard_start_xmit = NULL;
      pWlanDev->tx_timeout = hdd_tx_timeout;
      pWlanDev->get_stats = hdd_stats;
      pWlanDev->do_ioctl = hdd_ioctl;
      pWlanDev->tx_queue_len = NET_DEV_TX_QUEUE_LEN;
      pWlanDev->set_mac_address = hdd_set_mac_address;
#endif
}

hdd_adapter_t* hdd_alloc_station_adapter( hdd_context_t *pHddCtx, tSirMacAddr macAddr, char* name )
{
   struct net_device *pWlanDev = NULL;
   hdd_adapter_t *pAdapter = NULL;
#ifdef CONFIG_CFG80211
   /*
    * cfg80211 initialization and registration....
    */ 
   pWlanDev = alloc_netdev_mq(sizeof( hdd_adapter_t ), name, ether_setup, NUM_TX_QUEUES);
   
#else      
   //Allocate the net_device and private data (station ctx) 
   pWlanDev = alloc_etherdev_mq(sizeof( hdd_adapter_t ), NUM_TX_QUEUES);

#endif

   if(pWlanDev != NULL)
   {

      //Save the pointer to the net_device in the HDD adapter
      pAdapter = (hdd_adapter_t*) netdev_priv( pWlanDev );

#ifndef CONFIG_CFG80211
      //Init the net_device structure
      ether_setup(pWlanDev);
#endif

      vos_mem_zero( pAdapter, sizeof( hdd_adapter_t ) );

      pAdapter->dev = pWlanDev;
      pAdapter->pHddCtx = pHddCtx; 
      pAdapter->magic = WLAN_HDD_ADAPTER_MAGIC;

      init_completion(&pAdapter->session_open_comp_var);
      init_completion(&pAdapter->session_close_comp_var);
      init_completion(&pAdapter->disconnect_comp_var);
      init_completion(&pAdapter->linkup_event_var);
      init_completion(&pAdapter->cancel_rem_on_chan_var);
      init_completion(&pAdapter->rem_on_chan_ready_event);
      init_completion(&pAdapter->abortscan_event_var);
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38))
      init_completion(&pAdapter->offchannel_tx_event);
#endif
#ifdef CONFIG_CFG80211
      init_completion(&pAdapter->tx_action_cnf_event);
#endif
      init_completion(&pHddCtx->mc_sus_event_var);
      init_completion(&pHddCtx->tx_sus_event_var);

      init_completion(&pAdapter->scan_info.scan_req_completion_event);

      pAdapter->isLinkUpSvcNeeded = FALSE; 
      pAdapter->higherDtimTransition = eANI_BOOLEAN_TRUE;
      //Init the net_device structure
      strlcpy(pWlanDev->name, name, IFNAMSIZ);

      vos_mem_copy(pWlanDev->dev_addr, (void *)macAddr, sizeof(tSirMacAddr));
      vos_mem_copy( pAdapter->macAddressCurrent.bytes, macAddr, sizeof(tSirMacAddr));
      pWlanDev->watchdog_timeo = HDD_TX_TIMEOUT;
      pWlanDev->hard_header_len += LIBRA_HW_NEEDED_HEADROOM;

      hdd_set_station_ops( pAdapter->dev );

      pWlanDev->destructor = free_netdev;
#ifdef CONFIG_CFG80211
      pWlanDev->ieee80211_ptr = &pAdapter->wdev ;
      pAdapter->wdev.wiphy = pHddCtx->wiphy;  
      pAdapter->wdev.netdev =  pWlanDev;
#endif  
      /* set pWlanDev's parent to underlying device */
      SET_NETDEV_DEV(pWlanDev, pHddCtx->parent_dev);
   }

   return pAdapter;
}

VOS_STATUS hdd_register_interface( hdd_adapter_t *pAdapter, tANI_U8 rtnl_lock_held )
{
   struct net_device *pWlanDev = pAdapter->dev;
   //hdd_station_ctx_t *pHddStaCtx = &pAdapter->sessionCtx.station;
   //hdd_context_t *pHddCtx = WLAN_HDD_GET_CTX( pAdapter );
   //eHalStatus halStatus = eHAL_STATUS_SUCCESS;

   if( rtnl_lock_held )
   {
      if (strchr(pWlanDev->name, '%')) {
         if( dev_alloc_name(pWlanDev, pWlanDev->name) < 0 )
         {
            hddLog(VOS_TRACE_LEVEL_ERROR,"%s:Failed:dev_alloc_name",__func__);
            return VOS_STATUS_E_FAILURE;            
         }
      }
      if (register_netdevice(pWlanDev))
      {
         hddLog(VOS_TRACE_LEVEL_ERROR,"%s:Failed:register_netdev",__func__);
         return VOS_STATUS_E_FAILURE;         
      }
   }
   else
   {
      if(register_netdev(pWlanDev))
      {
         hddLog(VOS_TRACE_LEVEL_ERROR,"%s: Failed:register_netdev",__func__);
         return VOS_STATUS_E_FAILURE;         
      }
   }
   set_bit(NET_DEVICE_REGISTERED, &pAdapter->event_flags);

   return VOS_STATUS_SUCCESS;
}

eHalStatus hdd_smeCloseSessionCallback(void *pContext)
{
   if(pContext != NULL)
   {
      clear_bit(SME_SESSION_OPENED, &((hdd_adapter_t*)pContext)->event_flags);

      /* need to make sure all of our scheduled work has completed.
       * This callback is called from MC thread context, so it is safe to 
       * to call below flush workqueue API from here. 
       */
      flush_scheduled_work();
      complete(&((hdd_adapter_t*)pContext)->session_close_comp_var);
   }
   return eHAL_STATUS_SUCCESS;
}

VOS_STATUS hdd_init_station_mode( hdd_adapter_t *pAdapter )
{
   struct net_device *pWlanDev = pAdapter->dev;
   hdd_station_ctx_t *pHddStaCtx = &pAdapter->sessionCtx.station;
   hdd_context_t *pHddCtx = WLAN_HDD_GET_CTX( pAdapter );
   eHalStatus halStatus = eHAL_STATUS_SUCCESS;
   VOS_STATUS status = VOS_STATUS_E_FAILURE;
   int rc = 0;

   INIT_COMPLETION(pAdapter->session_open_comp_var);
   //Open a SME session for future operation
   halStatus = sme_OpenSession( pHddCtx->hHal, hdd_smeRoamCallback, pAdapter,
         (tANI_U8 *)&pAdapter->macAddressCurrent, &pAdapter->sessionId );
   if ( !HAL_STATUS_SUCCESS( halStatus ) )
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,
             "sme_OpenSession() failed with status code %08d [x%08lx]",
                                                 halStatus, halStatus );
      status = VOS_STATUS_E_FAILURE;
      goto error_sme_open;
   }
   
   //Block on a completion variable. Can't wait forever though.
   rc = wait_for_completion_interruptible_timeout(
                        &pAdapter->session_open_comp_var,
                        msecs_to_jiffies(WLAN_WAIT_TIME_SESSIONOPENCLOSE));
   if (!rc)
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,
             "Session is not opened within timeout period code %08d", rc );
      status = VOS_STATUS_E_FAILURE;
      goto error_sme_open;
   }

   // Register wireless extensions
   if( eHAL_STATUS_SUCCESS !=  (halStatus = hdd_register_wext(pWlanDev)))
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,
              "hdd_register_wext() failed with status code %08d [x%08lx]",
                                                   halStatus, halStatus );
      status = VOS_STATUS_E_FAILURE;
      goto error_register_wext;
   }
   //Safe to register the hard_start_xmit function again
#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,29))
   wlan_drv_ops.ndo_start_xmit = hdd_hard_start_xmit;
#else
   pWlanDev->hard_start_xmit = hdd_hard_start_xmit;
#endif

   //Set the Connection State to Not Connected
   pHddStaCtx->conn_info.connState = eConnectionState_NotConnected;

   //Set the default operation channel
   pHddStaCtx->conn_info.operationChannel = pHddCtx->cfg_ini->OperatingChannel;

   /* Make the default Auth Type as OPEN*/
   pHddStaCtx->conn_info.authType = eCSR_AUTH_TYPE_OPEN_SYSTEM;

   if( VOS_STATUS_SUCCESS != ( status = hdd_init_tx_rx( pAdapter ) ) )
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,
            "hdd_init_tx_rx() failed with status code %08d [x%08lx]",
                            status, status );
      goto error_init_txrx;
   }

   set_bit(INIT_TX_RX_SUCCESS, &pAdapter->event_flags);

   if( VOS_STATUS_SUCCESS != ( status = hdd_wmm_adapter_init( pAdapter ) ) )
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,
            "hdd_wmm_adapter_init() failed with status code %08d [x%08lx]",
                            status, status );
      goto error_wmm_init;
   }

   set_bit(WMM_INIT_DONE, &pAdapter->event_flags);

   return VOS_STATUS_SUCCESS;

error_wmm_init:
   clear_bit(INIT_TX_RX_SUCCESS, &pAdapter->event_flags);
   hdd_deinit_tx_rx(pAdapter);
error_init_txrx:
   hdd_UnregisterWext(pWlanDev);
error_register_wext:
   if(test_bit(SME_SESSION_OPENED, &pAdapter->event_flags))
   {
      INIT_COMPLETION(pAdapter->session_close_comp_var);
      if( eHAL_STATUS_SUCCESS == sme_CloseSession( pHddCtx->hHal,
                                    pAdapter->sessionId,
                                    hdd_smeCloseSessionCallback, pAdapter ) )
      {
         //Block on a completion variable. Can't wait forever though.
         wait_for_completion_interruptible_timeout(
                          &pAdapter->session_close_comp_var,
                           msecs_to_jiffies(WLAN_WAIT_TIME_SESSIONOPENCLOSE));
      }
}
error_sme_open:
   return status;
}

#ifdef CONFIG_CFG80211
void hdd_cleanup_actionframe( hdd_context_t *pHddCtx, hdd_adapter_t *pAdapter )
{
   hdd_cfg80211_state_t *cfgState;

   cfgState = WLAN_HDD_GET_CFG_STATE_PTR( pAdapter );

   if( NULL != cfgState->buf )
   {
      int rc;
      INIT_COMPLETION(pAdapter->tx_action_cnf_event);
      rc = wait_for_completion_interruptible_timeout(
                     &pAdapter->tx_action_cnf_event,
                     msecs_to_jiffies(ACTION_FRAME_TX_TIMEOUT));
      if(!rc)
      {
         VOS_TRACE(VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_ERROR, 
              ("ERROR: HDD Wait for Action Confirmation Failed!!\n"));
      }
   }
   return;
}
#endif

void hdd_deinit_adapter( hdd_context_t *pHddCtx, hdd_adapter_t *pAdapter )
{
   ENTER();
   switch ( pAdapter->device_mode )
   {
      case WLAN_HDD_INFRA_STATION:
      case WLAN_HDD_P2P_CLIENT:
      case WLAN_HDD_P2P_DEVICE:
      {
         if(test_bit(INIT_TX_RX_SUCCESS, &pAdapter->event_flags))
         {
            hdd_deinit_tx_rx( pAdapter );
            clear_bit(INIT_TX_RX_SUCCESS, &pAdapter->event_flags);
         }

         if(test_bit(WMM_INIT_DONE, &pAdapter->event_flags))
         {
            hdd_wmm_adapter_close( pAdapter );
            clear_bit(WMM_INIT_DONE, &pAdapter->event_flags);
         }

#ifdef CONFIG_CFG80211
         hdd_cleanup_actionframe(pHddCtx, pAdapter);
#endif

         break;
      }

      case WLAN_HDD_SOFTAP:
      case WLAN_HDD_P2P_GO:
#ifdef WLAN_SOFTAP_FEATURE
      {
#ifdef CONFIG_CFG80211
         hdd_cleanup_actionframe(pHddCtx, pAdapter);
#endif

         hdd_unregister_hostapd(pAdapter);
         hdd_set_conparam( 0 );
#ifdef CONFIG_CFG80211
         wlan_hdd_set_monitor_tx_adapter( WLAN_HDD_GET_CTX(pAdapter), NULL );
#endif
         break;
      }

      case WLAN_HDD_MONITOR:
      {
#ifdef CONFIG_CFG80211
          hdd_adapter_t* pAdapterforTx = pAdapter->sessionCtx.monitor.pAdapterForTx;
#endif
         if(test_bit(INIT_TX_RX_SUCCESS, &pAdapter->event_flags))
         {
            hdd_deinit_tx_rx( pAdapter );
            clear_bit(INIT_TX_RX_SUCCESS, &pAdapter->event_flags);
         }
#ifdef CONFIG_CFG80211
         if(NULL != pAdapterforTx)
         {
            hdd_cleanup_actionframe(pHddCtx, pAdapterforTx);
         }
#endif
#endif //WLAN_SOFTAP_FEATURE
         break;
      }


      default:
      break;
   }

   EXIT();
}

void hdd_cleanup_adapter( hdd_context_t *pHddCtx, hdd_adapter_t *pAdapter, tANI_U8 rtnl_held )
{
   struct net_device *pWlanDev = pAdapter->dev;

   if(test_bit(NET_DEVICE_REGISTERED, &pAdapter->event_flags)) {
      if( rtnl_held )
      {
         unregister_netdevice(pWlanDev);
      }
      else
      {
         unregister_netdev(pWlanDev);
      }
      // note that the pAdapter is no longer valid at this point
      // since the memory has been reclaimed
   }

}

VOS_STATUS hdd_enable_bmps_imps(hdd_context_t *pHddCtx)
{
   VOS_STATUS status = VOS_STATUS_SUCCESS;

   if(pHddCtx->cfg_ini->fIsBmpsEnabled)
   {
      sme_EnablePowerSave(pHddCtx->hHal, ePMC_BEACON_MODE_POWER_SAVE);
   }

   if(pHddCtx->cfg_ini->fIsAutoBmpsTimerEnabled)
   {
      sme_StartAutoBmpsTimer(pHddCtx->hHal); 
   }

   if (pHddCtx->cfg_ini->fIsImpsEnabled)
   {
      sme_EnablePowerSave (pHddCtx->hHal, ePMC_IDLE_MODE_POWER_SAVE);
   }

   return status;
}

VOS_STATUS hdd_disable_bmps_imps(hdd_context_t *pHddCtx, tANI_U8 session_type)
{
   hdd_adapter_t *pAdapter = NULL;
   eHalStatus halStatus;
   VOS_STATUS status = VOS_STATUS_E_INVAL;
   v_BOOL_t disableBmps = FALSE;
   v_BOOL_t disableImps = FALSE;
   
   switch(session_type)
   {
       case WLAN_HDD_INFRA_STATION:
       case WLAN_HDD_SOFTAP:
#ifdef WLAN_FEATURE_P2P
       case WLAN_HDD_P2P_CLIENT:
       case WLAN_HDD_P2P_GO:
#endif
          //Exit BMPS -> Is Sta/P2P Client is already connected
          pAdapter = hdd_get_adapter(pHddCtx, WLAN_HDD_INFRA_STATION);
          if((NULL != pAdapter)&&
              hdd_connIsConnected( WLAN_HDD_GET_STATION_CTX_PTR(pAdapter)))
          {
             disableBmps = TRUE;
          }

          pAdapter = hdd_get_adapter(pHddCtx, WLAN_HDD_P2P_CLIENT);
          if((NULL != pAdapter)&&
              hdd_connIsConnected( WLAN_HDD_GET_STATION_CTX_PTR(pAdapter)))
          {
             disableBmps = TRUE;
          }

          //Exit both Bmps and Imps incase of Go/SAP Mode
          if((WLAN_HDD_SOFTAP == session_type) ||
              (WLAN_HDD_P2P_GO == session_type))
          {
             disableBmps = TRUE;
             disableImps = TRUE;
          }

          if(TRUE == disableImps)
          {
             if (pHddCtx->cfg_ini->fIsImpsEnabled)
             {
                sme_DisablePowerSave (pHddCtx->hHal, ePMC_IDLE_MODE_POWER_SAVE);
             }
          }

          if(TRUE == disableBmps)
          {
             if(pHddCtx->cfg_ini->fIsBmpsEnabled)
             {
                 halStatus = sme_DisablePowerSave(pHddCtx->hHal, ePMC_BEACON_MODE_POWER_SAVE);

                 if(eHAL_STATUS_SUCCESS != halStatus)
                 {
                    status = VOS_STATUS_E_FAILURE;
                    hddLog(VOS_TRACE_LEVEL_ERROR,"%s: Fail to Disable Power Save\n", __func__);
                    VOS_ASSERT(0);
                    return status;
                 }
              }

              if(pHddCtx->cfg_ini->fIsAutoBmpsTimerEnabled)
              {
                 halStatus = sme_StopAutoBmpsTimer(pHddCtx->hHal);

                 if(eHAL_STATUS_SUCCESS != halStatus)
                 {
                    status = VOS_STATUS_E_FAILURE;
                    hddLog(VOS_TRACE_LEVEL_ERROR,"%s: Fail to Stop Auto Bmps Timer\n", __func__);
                    VOS_ASSERT(0);
                    return status;
                 }
              }
          }

          if((TRUE == disableBmps) ||
              (TRUE == disableImps))
          {
              /* Now, get the chip into Full Power now */
              INIT_COMPLETION(pHddCtx->full_pwr_comp_var);
              halStatus = sme_RequestFullPower(pHddCtx->hHal, hdd_full_pwr_cbk,
                                   pHddCtx, eSME_FULL_PWR_NEEDED_BY_HDD);

              if(halStatus != eHAL_STATUS_SUCCESS)
              {
                 if(halStatus == eHAL_STATUS_PMC_PENDING)
                 {
                    //Block on a completion variable. Can't wait forever though
                    wait_for_completion_interruptible_timeout(
                         &pHddCtx->full_pwr_comp_var, msecs_to_jiffies(1000));
                 }
                 else
                 {
                    status = VOS_STATUS_E_FAILURE;
                    hddLog(VOS_TRACE_LEVEL_ERROR,"%s: Request for Full Power failed\n", __func__);
                    VOS_ASSERT(0);
                    return status;
                 }
              }

              status = VOS_STATUS_SUCCESS;
          }

          break;
   }
   return status;
}

hdd_adapter_t* hdd_open_adapter( hdd_context_t *pHddCtx, tANI_U8 session_type,
                                 char *iface_name, tSirMacAddr macAddr, 
                                 tANI_U8 rtnl_held )
{
   hdd_adapter_t *pAdapter = NULL;
   hdd_adapter_list_node_t *pHddAdapterNode = NULL;
   VOS_STATUS status = VOS_STATUS_E_FAILURE;
   VOS_STATUS exitbmpsStatus;

   hddLog(VOS_TRACE_LEVEL_INFO_HIGH, "%s iface =%s type = %d\n",__func__,iface_name,session_type);

   //Disable BMPS incase of Concurrency
   exitbmpsStatus = hdd_disable_bmps_imps(pHddCtx, session_type);

   if(VOS_STATUS_E_FAILURE == exitbmpsStatus)
   {
      //Fail to Exit BMPS
      VOS_ASSERT(0);
      return NULL;
   }

   switch(session_type)
   {
      case WLAN_HDD_INFRA_STATION:
#ifdef WLAN_FEATURE_P2P
      case WLAN_HDD_P2P_CLIENT:
      case WLAN_HDD_P2P_DEVICE:
#endif
      {
         pAdapter = hdd_alloc_station_adapter( pHddCtx, macAddr, iface_name );

         if( NULL == pAdapter )
            return NULL;

#ifdef CONFIG_CFG80211
         pAdapter->wdev.iftype = (session_type == WLAN_HDD_P2P_CLIENT) ?
                                  NL80211_IFTYPE_P2P_CLIENT:
                                  NL80211_IFTYPE_STATION;
#endif

         pAdapter->device_mode = session_type;

         status = hdd_init_station_mode( pAdapter );
         if( VOS_STATUS_SUCCESS != status )
            goto err_free_netdev;

         status = hdd_register_interface( pAdapter, rtnl_held );
         if( VOS_STATUS_SUCCESS != status )
         {
            hdd_deinit_adapter(pHddCtx, pAdapter);
            goto err_free_netdev;
         }
         //Stop the Interface TX queue.
         netif_tx_disable(pAdapter->dev);
         //netif_tx_disable(pWlanDev);
         netif_carrier_off(pAdapter->dev);

         break;
      }

#ifdef WLAN_FEATURE_P2P
      case WLAN_HDD_P2P_GO:
#endif
      case WLAN_HDD_SOFTAP:
      {
         pAdapter = hdd_wlan_create_ap_dev( pHddCtx, macAddr, (tANI_U8 *)iface_name );
         if( NULL == pAdapter )
            return NULL;

#ifdef CONFIG_CFG80211
         pAdapter->wdev.iftype = (session_type == WLAN_HDD_SOFTAP) ?
                                  NL80211_IFTYPE_AP:
                                  NL80211_IFTYPE_P2P_GO;
#endif
         pAdapter->device_mode = session_type;

         status = hdd_init_ap_mode(pAdapter);
         if( VOS_STATUS_SUCCESS != status )
            goto err_free_netdev;

         status = hdd_register_hostapd( pAdapter, rtnl_held );
         if( VOS_STATUS_SUCCESS != status )
         {
            hdd_deinit_adapter(pHddCtx, pAdapter);
            goto err_free_netdev;
         }

         netif_tx_disable(pAdapter->dev);
         netif_carrier_off(pAdapter->dev);

         hdd_set_conparam( 1 );
         break;
      }
      case WLAN_HDD_MONITOR:
      {
#ifdef CONFIG_CFG80211   
         pAdapter = hdd_alloc_station_adapter( pHddCtx, macAddr, iface_name );
         if( NULL == pAdapter )
            return NULL;

         pAdapter->wdev.iftype = NL80211_IFTYPE_MONITOR; 
         pAdapter->device_mode = session_type;
         status = hdd_register_interface( pAdapter, rtnl_held );
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,29)
         pAdapter->dev->netdev_ops = &wlan_mon_drv_ops;
#else
         pAdapter->dev->open = hdd_mon_open;
         pAdapter->dev->hard_start_xmit = hdd_mon_hard_start_xmit;
#endif
         hdd_init_tx_rx( pAdapter );
         set_bit(INIT_TX_RX_SUCCESS, &pAdapter->event_flags);
         //Set adapter to be used for data tx. It will use either GO or softap.
         pAdapter->sessionCtx.monitor.pAdapterForTx = 
                           hdd_get_adapter(pAdapter->pHddCtx, WLAN_HDD_SOFTAP);
#ifdef WLAN_FEATURE_P2P
         if (NULL == pAdapter->sessionCtx.monitor.pAdapterForTx)
         {
            pAdapter->sessionCtx.monitor.pAdapterForTx = 
                           hdd_get_adapter(pAdapter->pHddCtx, WLAN_HDD_P2P_GO);
         }
#endif
         /* This workqueue will be used to transmit management packet over
          * monitor interface. */
         INIT_WORK(&pAdapter->sessionCtx.monitor.pAdapterForTx->monTxWorkQueue,
                   hdd_mon_tx_work_queue);
#endif
      }
         break;
#ifdef ANI_MANF_DIAG
      case WLAN_HDD_FTM:
      {
         pAdapter = hdd_alloc_station_adapter( pHddCtx, macAddr, iface_name );

         if( NULL == pAdapter )
            return NULL;
         /* Assign NL80211_IFTYPE_STATION as interface type to resolve Kernel Warning
          * message while loading driver in FTM mode. */
         pAdapter->wdev.iftype = NL80211_IFTYPE_STATION;
         pAdapter->device_mode = session_type;
         status = hdd_register_interface( pAdapter, rtnl_held );
      }
         break;
#endif
      default:
      {
         VOS_ASSERT(0);
         return NULL;
      }
   }


   if( VOS_STATUS_SUCCESS == status )
   {
      //Add it to the hdd's session list. 
      pHddAdapterNode = vos_mem_malloc( sizeof( hdd_adapter_list_node_t ) );
      if( NULL == pHddAdapterNode )
      {
         status = VOS_STATUS_E_NOMEM;
      }
      else
      {
         pHddAdapterNode->pAdapter = pAdapter;
         status = hdd_add_adapter_back ( pHddCtx, 
                                         pHddAdapterNode );
      }
   }

   if( VOS_STATUS_SUCCESS != status )
   {
      if( NULL != pAdapter )
      {
         hdd_cleanup_adapter( pHddCtx, pAdapter, rtnl_held );
         pAdapter = NULL;   
      }
      if( NULL != pHddAdapterNode )
      {
         vos_mem_free( pHddAdapterNode );
      }

      goto resume_bmps;
   }

   if(VOS_STATUS_SUCCESS == status)
   {
      wlan_hdd_set_concurrency_mode(pHddCtx, session_type);

#ifdef FEATURE_WLAN_NON_INTEGRATED_SOC
      /* If there are concurrent session enable SW frame translation 
            * for all registered STA
            * This is not required in case of PRIMA as HW frame translation
            * is disabled in PRIMA*/ 
      if (vos_concurrent_sessions_running())
      {
         WLANTL_ConfigureSwFrameTXXlationForAll(pHddCtx->pvosContext, TRUE);
      }
#endif
   }

   return pAdapter;

err_free_netdev:
   free_netdev(pAdapter->dev);
   wlan_hdd_release_intf_addr( pHddCtx,
                               pAdapter->macAddressCurrent.bytes );

resume_bmps:
   //If bmps disabled enable it
   if(VOS_STATUS_SUCCESS == exitbmpsStatus)
   {
      hdd_enable_bmps_imps(pHddCtx);
   }
   return NULL;
}

VOS_STATUS hdd_close_adapter( hdd_context_t *pHddCtx, hdd_adapter_t *pAdapter,
                              tANI_U8 rtnl_held )
{
   hdd_adapter_list_node_t *pAdapterNode, *pCurrent, *pNext;
   VOS_STATUS status;

   status = hdd_get_front_adapter ( pHddCtx, &pCurrent );
   if( VOS_STATUS_SUCCESS != status )
      return status;

   while ( pCurrent->pAdapter != pAdapter )
   {
      status = hdd_get_next_adapter ( pHddCtx, pCurrent, &pNext );
      if( VOS_STATUS_SUCCESS != status )
         break;

      pCurrent = pNext;
   }
   pAdapterNode = pCurrent;
   if( VOS_STATUS_SUCCESS == status )
   {
      wlan_hdd_clear_concurrency_mode(pHddCtx, pAdapter->device_mode);
      hdd_cleanup_adapter( pHddCtx, pAdapterNode->pAdapter, rtnl_held );
      hdd_remove_adapter( pHddCtx, pAdapterNode );
      vos_mem_free( pAdapterNode );

#ifdef FEATURE_WLAN_NON_INTEGRATED_SOC
      /* If there is no concurrent session disable SW frame translation 
       * for all registered STA */ 
      /* This is not required in case of PRIMA as HW frame translation
       * is disabled in PRIMA*/
      if (!vos_concurrent_sessions_running())
      {
         WLANTL_ConfigureSwFrameTXXlationForAll(pHddCtx->pvosContext, FALSE);
      }
#endif

      /* If there is a single session of STA/P2P client, re-enable BMPS */
      if ((!vos_concurrent_sessions_running()) && 
           ((pHddCtx->no_of_sessions[VOS_STA_MODE] >= 1) || 
           (pHddCtx->no_of_sessions[VOS_P2P_CLIENT_MODE] >= 1)))
      {
         hdd_enable_bmps_imps(pHddCtx);
      }

      return VOS_STATUS_SUCCESS;
   }

   return VOS_STATUS_E_FAILURE;
}

VOS_STATUS hdd_close_all_adapters( hdd_context_t *pHddCtx )
{
   hdd_adapter_list_node_t *pHddAdapterNode;
   VOS_STATUS status;

   ENTER();

   do
   {
      status = hdd_remove_front_adapter( pHddCtx, &pHddAdapterNode );
      if( pHddAdapterNode && VOS_STATUS_SUCCESS == status )
      {
         hdd_cleanup_adapter( pHddCtx, pHddAdapterNode->pAdapter, FALSE );
         vos_mem_free( pHddAdapterNode );
      }
   }while( NULL != pHddAdapterNode && VOS_STATUS_E_EMPTY != status );
   
   EXIT();

   return VOS_STATUS_SUCCESS;
}

void wlan_hdd_reset_prob_rspies(hdd_adapter_t* pHostapdAdapter)
{
    v_U8_t addIE[1] = {0};

    if ( eHAL_STATUS_FAILURE == ccmCfgSetStr((WLAN_HDD_GET_CTX(pHostapdAdapter))->hHal,
                            WNI_CFG_PROBE_RSP_ADDNIE_DATA1,(tANI_U8*)addIE, 0, NULL,
                            eANI_BOOLEAN_FALSE) )
    {
        hddLog(LOGE,
           "Could not pass on WNI_CFG_PROBE_RSP_ADDNIE_DATA1 to CCM\n");
    }

    if ( eHAL_STATUS_FAILURE == ccmCfgSetStr((WLAN_HDD_GET_CTX(pHostapdAdapter))->hHal,
                            WNI_CFG_PROBE_RSP_ADDNIE_DATA2, (tANI_U8*)addIE, 0, NULL,
                            eANI_BOOLEAN_FALSE) )
    {
        hddLog(LOGE,
           "Could not pass on WNI_CFG_PROBE_RSP_ADDNIE_DATA2 to CCM\n");
    }

    if ( eHAL_STATUS_FAILURE == ccmCfgSetStr((WLAN_HDD_GET_CTX(pHostapdAdapter))->hHal,
                            WNI_CFG_PROBE_RSP_ADDNIE_DATA3, (tANI_U8*)addIE, 0, NULL,
                            eANI_BOOLEAN_FALSE) )
    {
        hddLog(LOGE,
           "Could not pass on WNI_CFG_PROBE_RSP_ADDNIE_DATA3 to CCM\n");
    }
}

VOS_STATUS hdd_stop_adapter( hdd_context_t *pHddCtx, hdd_adapter_t *pAdapter )
{
   eHalStatus halStatus = eHAL_STATUS_SUCCESS;
   hdd_wext_state_t *pWextState = WLAN_HDD_GET_WEXT_STATE_PTR(pAdapter);
   union iwreq_data wrqu;

   ENTER();

   switch(pAdapter->device_mode)
   {
      case WLAN_HDD_INFRA_STATION:
      case WLAN_HDD_P2P_CLIENT:
      case WLAN_HDD_P2P_DEVICE:
         if( hdd_connIsConnected( WLAN_HDD_GET_STATION_CTX_PTR( pAdapter )) )
         {
            if (pWextState->roamProfile.BSSType == eCSR_BSS_TYPE_START_IBSS)
                halStatus = sme_RoamDisconnect(pHddCtx->hHal,
                                             pAdapter->sessionId,
                                             eCSR_DISCONNECT_REASON_IBSS_LEAVE);
            else
                halStatus = sme_RoamDisconnect(pHddCtx->hHal,
                                            pAdapter->sessionId, 
                                            eCSR_DISCONNECT_REASON_UNSPECIFIED);
            //success implies disconnect command got queued up successfully
            if(halStatus == eHAL_STATUS_SUCCESS)
            {
               wait_for_completion_interruptible_timeout(&pAdapter->disconnect_comp_var,
               msecs_to_jiffies(WLAN_WAIT_TIME_DISCONNECT));
            }
            memset(&wrqu, '\0', sizeof(wrqu));
            wrqu.ap_addr.sa_family = ARPHRD_ETHER;
            memset(wrqu.ap_addr.sa_data,'\0',ETH_ALEN);
            wireless_send_event(pAdapter->dev, SIOCGIWAP, &wrqu, NULL);
         }
         else
         {
            hdd_abort_mac_scan(pHddCtx);
         }

         if (test_bit(SME_SESSION_OPENED, &pAdapter->event_flags)) 
         {
            INIT_COMPLETION(pAdapter->session_close_comp_var);
            if (eHAL_STATUS_SUCCESS ==
                sme_CloseSession(pHddCtx->hHal, pAdapter->sessionId, 
                                 hdd_smeCloseSessionCallback, pAdapter))
            {
               //Block on a completion variable. Can't wait forever though.
               wait_for_completion_interruptible_timeout(
                          &pAdapter->session_close_comp_var, 
                          msecs_to_jiffies(WLAN_WAIT_TIME_SESSIONOPENCLOSE));
            }
         }

         break;

      case WLAN_HDD_SOFTAP:
      case WLAN_HDD_P2P_GO:
         //Any softap specific cleanup here...
         mutex_lock(&pHddCtx->sap_lock);
         if (test_bit(SOFTAP_BSS_STARTED, &pAdapter->event_flags)) 
         {
            VOS_STATUS status;
            hdd_context_t *pHddCtx = WLAN_HDD_GET_CTX(pAdapter);

            //Stop Bss.
            status = WLANSAP_StopBss(pHddCtx->pvosContext);
            if (VOS_IS_STATUS_SUCCESS(status))
            {
               hdd_hostapd_state_t *pHostapdState = 
                  WLAN_HDD_GET_HOSTAP_STATE_PTR(pAdapter);

               status = vos_wait_single_event(&pHostapdState->vosEvent, 10000);
   
               if (!VOS_IS_STATUS_SUCCESS(status))
               {
                  hddLog(LOGE, "%s: failure waiting for WLANSAP_StopBss",
                         __FUNCTION__);
               }
            }
            else
            {
               hddLog(LOGE, "%s: failure in WLANSAP_StopBss", __FUNCTION__);
            }
            clear_bit(SOFTAP_BSS_STARTED, &pAdapter->event_flags);

            if (eHAL_STATUS_FAILURE ==
                ccmCfgSetInt(pHddCtx->hHal, WNI_CFG_PROBE_RSP_BCN_ADDNIE_FLAG,
                             0, NULL, eANI_BOOLEAN_FALSE))
            {
               hddLog(LOGE,
                      "%s: Failed to set WNI_CFG_PROBE_RSP_BCN_ADDNIE_FLAG",
                      __FUNCTION__);
            }

            if ( eHAL_STATUS_FAILURE == ccmCfgSetInt((WLAN_HDD_GET_CTX(pAdapter))->hHal,
                     WNI_CFG_ASSOC_RSP_ADDNIE_FLAG, 0, NULL,
                     eANI_BOOLEAN_FALSE) )
            {
               hddLog(LOGE,
                     "Could not pass on WNI_CFG_ASSOC_RSP_ADDNIE_FLAG to CCM");
            }

            // Reset WNI_CFG_PROBE_RSP Flags
            wlan_hdd_reset_prob_rspies(pAdapter);
            kfree(pAdapter->sessionCtx.ap.beacon);
            pAdapter->sessionCtx.ap.beacon = NULL;
         }
         mutex_unlock(&pHddCtx->sap_lock);
         break;
      case WLAN_HDD_MONITOR:
         break;
      default:
         break;
   }

   EXIT();
   return VOS_STATUS_SUCCESS;
}

VOS_STATUS hdd_stop_all_adapters( hdd_context_t *pHddCtx )
{
   hdd_adapter_list_node_t *pAdapterNode = NULL, *pNext = NULL;
   VOS_STATUS status;
   hdd_adapter_t      *pAdapter;

   ENTER();

   status = hdd_get_front_adapter ( pHddCtx, &pAdapterNode );

   while ( NULL != pAdapterNode && VOS_STATUS_SUCCESS == status )
   {
      pAdapter = pAdapterNode->pAdapter;
      netif_tx_disable(pAdapter->dev);
      netif_carrier_off(pAdapter->dev);

      hdd_stop_adapter( pHddCtx, pAdapter );

      status = hdd_get_next_adapter ( pHddCtx, pAdapterNode, &pNext );
      pAdapterNode = pNext;
   }

   EXIT();

   return VOS_STATUS_SUCCESS;
}

VOS_STATUS hdd_reset_all_adapters( hdd_context_t *pHddCtx )
{
   hdd_adapter_list_node_t *pAdapterNode = NULL, *pNext = NULL;
   VOS_STATUS status;
   hdd_adapter_t *pAdapter;

   ENTER();

   status =  hdd_get_front_adapter ( pHddCtx, &pAdapterNode );

   while ( NULL != pAdapterNode && VOS_STATUS_SUCCESS == status )
   {
      pAdapter = pAdapterNode->pAdapter;
      netif_tx_disable(pAdapter->dev);
      netif_carrier_off(pAdapter->dev);

      //Record whether STA is associated
      pAdapter->sessionCtx.station.bSendDisconnect = 
            hdd_connIsConnected( WLAN_HDD_GET_STATION_CTX_PTR( pAdapter )) ?
                                                       VOS_TRUE : VOS_FALSE;

      hdd_deinit_tx_rx(pAdapter);
      hdd_wmm_adapter_close(pAdapter);

      status = hdd_get_next_adapter ( pHddCtx, pAdapterNode, &pNext );
      pAdapterNode = pNext;
   }

   EXIT();

   return VOS_STATUS_SUCCESS;
}

VOS_STATUS hdd_start_all_adapters( hdd_context_t *pHddCtx )
{
   hdd_adapter_list_node_t *pAdapterNode = NULL, *pNext = NULL;
   VOS_STATUS status;
   hdd_adapter_t      *pAdapter;
   v_MACADDR_t  bcastMac = VOS_MAC_ADDR_BROADCAST_INITIALIZER;

   ENTER();

   status = hdd_get_front_adapter ( pHddCtx, &pAdapterNode );

   while ( NULL != pAdapterNode && VOS_STATUS_SUCCESS == status )
   {
      pAdapter = pAdapterNode->pAdapter;

      switch(pAdapter->device_mode)
      {
         case WLAN_HDD_INFRA_STATION:
         case WLAN_HDD_P2P_CLIENT:
         case WLAN_HDD_P2P_DEVICE:
            hdd_init_station_mode(pAdapter);
            /* Open the gates for HDD to receive Wext commands */
            pAdapter->isLinkUpSvcNeeded = FALSE; 
            pAdapter->scan_info.mScanPending = FALSE;
            pAdapter->scan_info.waitScanResult = FALSE;

            //Trigger the initial scan
            hdd_wlan_initial_scan(pAdapter);

            //Indicate disconnect event to supplicant if associated previously
            if(pAdapter->sessionCtx.station.bSendDisconnect)
            {
               union iwreq_data wrqu;
               memset(&wrqu, '\0', sizeof(wrqu));
               wrqu.ap_addr.sa_family = ARPHRD_ETHER;
               memset(wrqu.ap_addr.sa_data,'\0',ETH_ALEN);
               wireless_send_event(pAdapter->dev, SIOCGIWAP, &wrqu, NULL);
               pAdapter->sessionCtx.station.bSendDisconnect = VOS_FALSE;

#ifdef CONFIG_CFG80211
               /* indicate disconnected event to nl80211 */
               cfg80211_disconnected(pAdapter->dev, WLAN_REASON_UNSPECIFIED,
                                     NULL, 0, GFP_KERNEL); 
#endif
            }
            break;

         case WLAN_HDD_SOFTAP:
            /* softAP can handle SSR */
            break;

         case WLAN_HDD_P2P_GO:
#ifdef CONFIG_CFG80211
              hddLog(VOS_TRACE_LEVEL_ERROR, "%s [SSR] send restart supplicant",
                                                       __func__);
              /* event supplicant to restart */
              cfg80211_del_sta(pAdapter->dev,
                        (const u8 *)&bcastMac.bytes[0], GFP_KERNEL);
#endif
            break;

         case WLAN_HDD_MONITOR:
            /* monitor interface start */
            break;
         default:
            break;
      }

      status = hdd_get_next_adapter ( pHddCtx, pAdapterNode, &pNext );
      pAdapterNode = pNext;
   }

   EXIT();

   return VOS_STATUS_SUCCESS;
}

VOS_STATUS hdd_reconnect_all_adapters( hdd_context_t *pHddCtx )
{
   hdd_adapter_list_node_t *pAdapterNode = NULL, *pNext = NULL;
   hdd_adapter_t *pAdapter;
   VOS_STATUS status;
   v_U32_t roamId;

   ENTER();

   status = hdd_get_front_adapter ( pHddCtx, &pAdapterNode );

   while ( NULL != pAdapterNode && VOS_STATUS_SUCCESS == status )
   {
      pAdapter = pAdapterNode->pAdapter;

      if( (WLAN_HDD_INFRA_STATION == pAdapter->device_mode) ||
             (WLAN_HDD_P2P_CLIENT == pAdapter->device_mode) )
      {
         hdd_station_ctx_t *pHddStaCtx = WLAN_HDD_GET_STATION_CTX_PTR(pAdapter);
         hdd_wext_state_t *pWextState = WLAN_HDD_GET_WEXT_STATE_PTR(pAdapter);

         pHddStaCtx->conn_info.connState = eConnectionState_NotConnected;
         init_completion(&pAdapter->disconnect_comp_var);
         sme_RoamDisconnect(pHddCtx->hHal, pAdapter->sessionId,
                             eCSR_DISCONNECT_REASON_UNSPECIFIED);

         wait_for_completion_interruptible_timeout(
                                &pAdapter->disconnect_comp_var,
                                msecs_to_jiffies(WLAN_WAIT_TIME_DISCONNECT));

         pWextState->roamProfile.csrPersona = pAdapter->device_mode; 
         pHddCtx->isAmpAllowed = VOS_FALSE;
         sme_RoamConnect(pHddCtx->hHal,
                         pAdapter->sessionId, &(pWextState->roamProfile),
                         &roamId); 
      }

      status = hdd_get_next_adapter ( pHddCtx, pAdapterNode, &pNext );
      pAdapterNode = pNext;
   }

   EXIT();

   return VOS_STATUS_SUCCESS;
}

v_U8_t hdd_is_ssr_required( void)
{
    return isSsrRequired;
}

void hdd_set_ssr_required( v_U8_t value)
{
    isSsrRequired = value;
}

VOS_STATUS hdd_get_front_adapter( hdd_context_t *pHddCtx,
                                  hdd_adapter_list_node_t** ppAdapterNode)
{
    VOS_STATUS status;
    spin_lock(&pHddCtx->hddAdapters.lock);
    status =  hdd_list_peek_front ( &pHddCtx->hddAdapters,
                   (hdd_list_node_t**) ppAdapterNode );
    spin_unlock(&pHddCtx->hddAdapters.lock);
    return status;
}

VOS_STATUS hdd_get_next_adapter( hdd_context_t *pHddCtx,
                                 hdd_adapter_list_node_t* pAdapterNode,
                                 hdd_adapter_list_node_t** pNextAdapterNode)
{
    VOS_STATUS status;
    spin_lock(&pHddCtx->hddAdapters.lock);
    status = hdd_list_peek_next ( &pHddCtx->hddAdapters,
                                  (hdd_list_node_t*) pAdapterNode,
                                  (hdd_list_node_t**)pNextAdapterNode );

    spin_unlock(&pHddCtx->hddAdapters.lock);
    return status;
}

VOS_STATUS hdd_remove_adapter( hdd_context_t *pHddCtx,
                               hdd_adapter_list_node_t* pAdapterNode)
{
    VOS_STATUS status;
    spin_lock(&pHddCtx->hddAdapters.lock);
    status =  hdd_list_remove_node ( &pHddCtx->hddAdapters,
                                     &pAdapterNode->node );
    spin_unlock(&pHddCtx->hddAdapters.lock);
    return status;
}

VOS_STATUS hdd_remove_front_adapter( hdd_context_t *pHddCtx,
                                     hdd_adapter_list_node_t** ppAdapterNode)
{
    VOS_STATUS status;
    spin_lock(&pHddCtx->hddAdapters.lock);
    status =  hdd_list_remove_front( &pHddCtx->hddAdapters,
                   (hdd_list_node_t**) ppAdapterNode );
    spin_unlock(&pHddCtx->hddAdapters.lock);
    return status;
}

VOS_STATUS hdd_add_adapter_back( hdd_context_t *pHddCtx,
                                 hdd_adapter_list_node_t* pAdapterNode)
{
    VOS_STATUS status;
    spin_lock(&pHddCtx->hddAdapters.lock);
    status =  hdd_list_insert_back ( &pHddCtx->hddAdapters,
                   (hdd_list_node_t*) pAdapterNode );
    spin_unlock(&pHddCtx->hddAdapters.lock);
    return status;
}

VOS_STATUS hdd_add_adapter_front( hdd_context_t *pHddCtx,
                                  hdd_adapter_list_node_t* pAdapterNode)
{
    VOS_STATUS status;
    spin_lock(&pHddCtx->hddAdapters.lock);
    status =  hdd_list_insert_front ( &pHddCtx->hddAdapters,
                   (hdd_list_node_t*) pAdapterNode );
    spin_unlock(&pHddCtx->hddAdapters.lock);
    return status;
}

hdd_adapter_t * hdd_get_adapter_by_macaddr( hdd_context_t *pHddCtx,
                                            tSirMacAddr macAddr )
{
   hdd_adapter_list_node_t *pAdapterNode = NULL, *pNext = NULL;
   hdd_adapter_t *pAdapter;
   VOS_STATUS status;

   status = hdd_get_front_adapter ( pHddCtx, &pAdapterNode );

   while ( NULL != pAdapterNode && VOS_STATUS_SUCCESS == status )
   {
      pAdapter = pAdapterNode->pAdapter;

      if( pAdapter && vos_mem_compare( pAdapter->macAddressCurrent.bytes,
                                       macAddr, sizeof(tSirMacAddr) ) )
      {
         return pAdapter;
      }
      status = hdd_get_next_adapter ( pHddCtx, pAdapterNode, &pNext );
      pAdapterNode = pNext;
   }

   return NULL;

} 

hdd_adapter_t * hdd_get_adapter_by_name( hdd_context_t *pHddCtx, tANI_U8 *name )
{
   hdd_adapter_list_node_t *pAdapterNode = NULL, *pNext = NULL;
   hdd_adapter_t *pAdapter;
   VOS_STATUS status;

   status = hdd_get_front_adapter ( pHddCtx, &pAdapterNode );

   while ( NULL != pAdapterNode && VOS_STATUS_SUCCESS == status )
   {
      pAdapter = pAdapterNode->pAdapter;

      if( pAdapter && !strncmp( pAdapter->dev->name, (const char *)name,
          IFNAMSIZ ) )
      {
         return pAdapter;
      }
      status = hdd_get_next_adapter ( pHddCtx, pAdapterNode, &pNext );
      pAdapterNode = pNext;
   }

   return NULL;

} 

hdd_adapter_t * hdd_get_adapter( hdd_context_t *pHddCtx, device_mode_t mode )
{
   hdd_adapter_list_node_t *pAdapterNode = NULL, *pNext = NULL;
   hdd_adapter_t *pAdapter;
   VOS_STATUS status;

   status = hdd_get_front_adapter ( pHddCtx, &pAdapterNode );

   while ( NULL != pAdapterNode && VOS_STATUS_SUCCESS == status )
   {
      pAdapter = pAdapterNode->pAdapter;

      if( pAdapter && (mode == pAdapter->device_mode) )
      {
         return pAdapter;
      }
      status = hdd_get_next_adapter ( pHddCtx, pAdapterNode, &pNext );
      pAdapterNode = pNext;
   }

   return NULL;

} 

//Remove this function later
hdd_adapter_t * hdd_get_mon_adapter( hdd_context_t *pHddCtx )
{
   hdd_adapter_list_node_t *pAdapterNode = NULL, *pNext = NULL;
   hdd_adapter_t *pAdapter;
   VOS_STATUS status;

   status = hdd_get_front_adapter ( pHddCtx, &pAdapterNode );

   while ( NULL != pAdapterNode && VOS_STATUS_SUCCESS == status )
   {
      pAdapter = pAdapterNode->pAdapter;

      if( pAdapter && WLAN_HDD_MONITOR == pAdapter->device_mode )
      {
         return pAdapter;
      }

      status = hdd_get_next_adapter ( pHddCtx, pAdapterNode, &pNext );
      pAdapterNode = pNext;
   }

   return NULL;

} 

#ifdef CONFIG_CFG80211
/**---------------------------------------------------------------------------
  
  \brief hdd_set_monitor_tx_adapter() - 

   This API initializes the adapter to be used while transmitting on monitor
   adapter. 
   
  \param  - pHddCtx - Pointer to the HDD context.
            pAdapter - Adapter that will used for TX. This can be NULL.
  \return - None. 
  --------------------------------------------------------------------------*/
void wlan_hdd_set_monitor_tx_adapter( hdd_context_t *pHddCtx, hdd_adapter_t *pAdapter )
{
   hdd_adapter_t *pMonAdapter;

   pMonAdapter = hdd_get_adapter( pHddCtx, WLAN_HDD_MONITOR );

   if( NULL != pMonAdapter )
   {
      pMonAdapter->sessionCtx.monitor.pAdapterForTx = pAdapter;
   }
}
#endif
/**---------------------------------------------------------------------------
  
  \brief hdd_select_queue() - 

   This API returns the operating channel of the requested device mode 
   
  \param  - pHddCtx - Pointer to the HDD context.
              - mode - Device mode for which operating channel is required
                suported modes - WLAN_HDD_INFRA_STATION, WLAN_HDD_P2P_CLIENT
                                 WLAN_HDD_SOFTAP, WLAN_HDD_P2P_GO.
  \return - channel number. "0" id the requested device is not found OR it is not connected. 
  --------------------------------------------------------------------------*/
v_U8_t hdd_get_operating_channel( hdd_context_t *pHddCtx, device_mode_t mode )
{
   hdd_adapter_list_node_t *pAdapterNode = NULL, *pNext = NULL;
   VOS_STATUS status;
   hdd_adapter_t      *pAdapter;
   v_U8_t operatingChannel = 0;

   status = hdd_get_front_adapter ( pHddCtx, &pAdapterNode );

   while ( NULL != pAdapterNode && VOS_STATUS_SUCCESS == status )
   {
      pAdapter = pAdapterNode->pAdapter;

      if( mode == pAdapter->device_mode )
      {
        switch(pAdapter->device_mode)
        {
          case WLAN_HDD_INFRA_STATION:
          case WLAN_HDD_P2P_CLIENT: 
            if( hdd_connIsConnected( WLAN_HDD_GET_STATION_CTX_PTR( pAdapter )) )
              operatingChannel = (WLAN_HDD_GET_STATION_CTX_PTR(pAdapter))->conn_info.operationChannel;
            break;
          case WLAN_HDD_SOFTAP:
          case WLAN_HDD_P2P_GO:
            /*softap connection info */
            if(test_bit(SOFTAP_BSS_STARTED, &pAdapter->event_flags)) 
              operatingChannel = (WLAN_HDD_GET_AP_CTX_PTR(pAdapter))->operatingChannel;
            break;
          default:
            break;
        }

        break; //Found the device of interest. break the loop
      }

      status = hdd_get_next_adapter ( pHddCtx, pAdapterNode, &pNext );
      pAdapterNode = pNext;
   }
   return operatingChannel;
}

#ifdef WLAN_FEATURE_PACKET_FILTERING
/**---------------------------------------------------------------------------

  \brief hdd_set_multicast_list() - 

  This used to set the multicast address list.

  \param  - dev - Pointer to the WLAN device.
  - skb - Pointer to OS packet (sk_buff).
  \return - success/fail 

  --------------------------------------------------------------------------*/
static void hdd_set_multicast_list(struct net_device *dev)
{
   hdd_adapter_t *pAdapter = WLAN_HDD_GET_PRIV_PTR(dev);
   hdd_context_t *pHddCtx;
   int mc_count;
   int i = 0;
   struct netdev_hw_addr *ha;
   pHddCtx = (hdd_context_t*)pAdapter->pHddCtx;
   if (NULL == pHddCtx)
   {
      hddLog(VOS_TRACE_LEVEL_ERROR,
            "%s: HDD context is Null", __FUNCTION__);
      return;
   }

   if (dev->flags & IFF_ALLMULTI)
   {
      hddLog(VOS_TRACE_LEVEL_INFO,
            "%s: allow all multicast frames", __FUNCTION__);
      pHddCtx->mc_addr_list.mc_cnt = 0;
   }
   else 
   {
      mc_count = netdev_mc_count(dev);
      hddLog(VOS_TRACE_LEVEL_INFO,
            "%s: mc_count = %u", __FUNCTION__, mc_count);
      if (mc_count > WLAN_HDD_MAX_MC_ADDR_LIST)
      {
         hddLog(VOS_TRACE_LEVEL_INFO,
               "%s: No free filter available; allow all multicast frames", __FUNCTION__);
         pHddCtx->mc_addr_list.mc_cnt = 0;
         return;
      }

      pHddCtx->mc_addr_list.mc_cnt = mc_count;

      netdev_for_each_mc_addr(ha, dev) {
         if (i == mc_count)
            break;
         memset(&(pHddCtx->mc_addr_list.addr[i][0]), 0, ETH_ALEN);
         memcpy(&(pHddCtx->mc_addr_list.addr[i][0]), ha->addr, ETH_ALEN);
         hddLog(VOS_TRACE_LEVEL_INFO, "\n%s: mlist[%d] = %02x:%02x:%02x:%02x:%02x:%02x", 
               __func__, i, 
               pHddCtx->mc_addr_list.addr[i][0], pHddCtx->mc_addr_list.addr[i][1], 
               pHddCtx->mc_addr_list.addr[i][2], pHddCtx->mc_addr_list.addr[i][3], 
               pHddCtx->mc_addr_list.addr[i][4], pHddCtx->mc_addr_list.addr[i][5]);
         i++;
      }
   }
   return;
}
#endif

/**---------------------------------------------------------------------------
  
  \brief hdd_select_queue() - 

   This function is registered with the Linux OS for network
   core to decide which queue to use first.
   
  \param  - dev - Pointer to the WLAN device.
              - skb - Pointer to OS packet (sk_buff).
  \return - ac, Queue Index/access category corresponding to UP in IP header 
  
  --------------------------------------------------------------------------*/
v_U16_t hdd_select_queue(struct net_device *dev,
    struct sk_buff *skb)
{
   return hdd_wmm_select_queue(dev, skb);
}


/**---------------------------------------------------------------------------

  \brief hdd_wlan_initial_scan() -

   This function triggers the initial scan

  \param  - pAdapter - Pointer to the HDD adapter.

  --------------------------------------------------------------------------*/
void hdd_wlan_initial_scan(hdd_adapter_t *pAdapter)
{
   tCsrScanRequest scanReq;
   tCsrChannelInfo channelInfo;
   eHalStatus halStatus;
   unsigned long scanId;
   hdd_context_t *pHddCtx = WLAN_HDD_GET_CTX(pAdapter);

   vos_mem_zero(&scanReq, sizeof(tCsrScanRequest));
   vos_mem_set(&scanReq.bssid, sizeof(tCsrBssid), 0xff);
   scanReq.BSSType = eCSR_BSS_TYPE_ANY;

   if(sme_Is11dSupported(pHddCtx->hHal))
   {
      halStatus = sme_ScanGetBaseChannels( pHddCtx->hHal, &channelInfo );
      if ( HAL_STATUS_SUCCESS( halStatus ) )
      {
         scanReq.ChannelInfo.ChannelList = vos_mem_malloc(channelInfo.numOfChannels);
         if( !scanReq.ChannelInfo.ChannelList )
         {
            hddLog(VOS_TRACE_LEVEL_ERROR, "%s kmalloc failed", __func__);
            vos_mem_free(channelInfo.ChannelList);
            return;
         }
         vos_mem_copy(scanReq.ChannelInfo.ChannelList, channelInfo.ChannelList,
            channelInfo.numOfChannels);
         scanReq.ChannelInfo.numOfChannels = channelInfo.numOfChannels;
         vos_mem_free(channelInfo.ChannelList);
      }

      scanReq.scanType = eSIR_PASSIVE_SCAN;
      scanReq.requestType = eCSR_SCAN_REQUEST_11D_SCAN;
      scanReq.maxChnTime = pHddCtx->cfg_ini->nPassiveMaxChnTime;
      scanReq.minChnTime = pHddCtx->cfg_ini->nPassiveMinChnTime;
   }
   else
   {
      scanReq.scanType = eSIR_ACTIVE_SCAN;
      scanReq.requestType = eCSR_SCAN_REQUEST_FULL_SCAN;
      scanReq.maxChnTime = pHddCtx->cfg_ini->nActiveMaxChnTime;
      scanReq.minChnTime = pHddCtx->cfg_ini->nActiveMinChnTime;
   }

   halStatus = sme_ScanRequest(pHddCtx->hHal, pAdapter->sessionId, &scanReq, &scanId, NULL, NULL);
   if ( !HAL_STATUS_SUCCESS( halStatus ) )
   {
      hddLog(VOS_TRACE_LEVEL_ERROR, "%s: sme_ScanRequest failed status code %d",
         __func__, halStatus );
   }

   if(sme_Is11dSupported(pHddCtx->hHal))
        vos_mem_free(scanReq.ChannelInfo.ChannelList);
}

struct fullPowerContext
{
   struct completion completion;
   unsigned int magic;
};
#define POWER_CONTEXT_MAGIC  0x504F5752   //POWR

/**---------------------------------------------------------------------------

  \brief hdd_full_power_callback() - HDD full power callback function

  This is the function invoked by SME to inform the result of a full power
  request issued by HDD

  \param  - callbackcontext - Pointer to cookie
  \param  - status - result of request

  \return - None

  --------------------------------------------------------------------------*/
static void hdd_full_power_callback(void *callbackContext, eHalStatus status)
{
   struct fullPowerContext *pContext = callbackContext;

   hddLog(VOS_TRACE_LEVEL_INFO,
          "%s: context = %p, status = %d", pContext, status);

   if (NULL == callbackContext)
   {
      hddLog(VOS_TRACE_LEVEL_ERROR,
             "%s: Bad param, context [%p]",
             __FUNCTION__, callbackContext);
      return;
   }

   /* there is a race condition that exists between this callback function
      and the caller since the caller could time out either before or
      while this code is executing.  we'll assume the timeout hasn't
      occurred, but we'll verify that right before we save our work */

   if (POWER_CONTEXT_MAGIC != pContext->magic)
   {
      /* the caller presumably timed out so there is nothing we can do */
      hddLog(VOS_TRACE_LEVEL_WARN,
             "%s: Invalid context, magic [%08x]",
              __FUNCTION__, pContext->magic);
      return;
   }

   /* the race is on.  caller could have timed out immediately after
      we verified the magic, but if so, caller will wait a short time
      for us to notify the caller, so the context will stay valid */
   complete(&pContext->completion);
}

/**---------------------------------------------------------------------------

  \brief hdd_wlan_exit() - HDD WLAN exit function

  This is the driver exit point (invoked during rmmod)

  \param  - pHddCtx - Pointer to the HDD Context

  \return - None

  --------------------------------------------------------------------------*/
void hdd_wlan_exit(hdd_context_t *pHddCtx)
{
   eHalStatus halStatus;
   v_CONTEXT_t pVosContext = pHddCtx->pvosContext;
   VOS_STATUS vosStatus;
#ifdef ANI_BUS_TYPE_SDIO
   struct sdio_func *sdio_func_dev = NULL;
#endif // ANI_BUS_TYPE_SDIO
#ifdef CONFIG_CFG80211
    struct wiphy *wiphy = pHddCtx->wiphy;
#endif 
#ifdef FEATURE_WLAN_INTEGRATED_SOC
   hdd_adapter_t* pAdapter;
#endif
   struct fullPowerContext powerContext;
   long lrc;

   ENTER();

   // Unloading, restart logic is no more required.
   wlan_hdd_restart_deinit(pHddCtx);

#ifdef CONFIG_CFG80211
#ifdef WLAN_SOFTAP_FEATURE
   if (VOS_STA_SAP_MODE != hdd_get_conparam())
#endif
   {
#ifdef ANI_MANF_DIAG
      if (VOS_FTM_MODE != hdd_get_conparam())
#endif /* ANI_MANF_DIAG */
      {
         hdd_adapter_t* pAdapter = hdd_get_adapter(pHddCtx,
                                      WLAN_HDD_INFRA_STATION);
         if (pAdapter == NULL)
            pAdapter = hdd_get_adapter(pHddCtx, WLAN_HDD_P2P_CLIENT);

         if (pAdapter != NULL)
         {
            wlan_hdd_cfg80211_pre_voss_stop(pAdapter);
            hdd_UnregisterWext(pAdapter->dev);
         }
      }
   }
#endif

#ifdef ANI_MANF_DIAG
   if (VOS_FTM_MODE == hdd_get_conparam())
  {
    wlan_hdd_ftm_close(pHddCtx);
    goto free_hdd_ctx;
  }
#endif  
   //Stop the Interface TX queue.
   //netif_tx_disable(pWlanDev);
   //netif_carrier_off(pWlanDev);

#ifdef CONFIG_HAS_EARLYSUSPEND
   // unregister suspend/resume callbacks
   if(pHddCtx->cfg_ini->nEnableSuspend)
   {
      unregister_wlan_suspend();
   }
#endif

#ifdef FEATURE_WLAN_INTEGRATED_SOC
#ifdef WLAN_SOFTAP_FEATURE
   if (VOS_STA_SAP_MODE == hdd_get_conparam())
   {
      pAdapter = hdd_get_adapter(pHddCtx,
                                   WLAN_HDD_SOFTAP);
   }
   else
   {
#endif
#ifdef ANI_MANF_DIAG
      if (VOS_FTM_MODE != hdd_get_conparam())
#endif /* ANI_MANF_DIAG */
      {
         pAdapter = hdd_get_adapter(pHddCtx,
                                    WLAN_HDD_INFRA_STATION);
      }
#ifdef WLAN_SOFTAP_FEATURE
   }
#endif
   /* DeRegister with platform driver as client for Suspend/Resume */
   vosStatus = hddDeregisterPmOps(pHddCtx);
   if ( !VOS_IS_STATUS_SUCCESS( vosStatus ) )
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: hddDeregisterPmOps failed",__func__);
      VOS_ASSERT(0);
   }

   vosStatus = hddDevTmUnregisterNotifyCallback(pHddCtx);
   if ( !VOS_IS_STATUS_SUCCESS( vosStatus ) )
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: hddDevTmUnregisterNotifyCallback failed",__func__);
   }
#endif //FEATURE_WLAN_INTEGRATED_SOC

   // Cancel any outstanding scan requests.  We are about to close all
   // of our adapters, but an adapter structure is what SME passes back
   // to our callback function.  Hence if there are any outstanding scan
   // requests then there is a race condition between when the adapter
   // is closed and when the callback is invoked.  We try to resolve that
   // race condition here by canceling any outstanding scans before we
   // close the adapters.
   // Note that the scans may be cancelled in an asynchronous manner, so
   // ideally there needs to be some kind of synchronization.  Rather than
   // introduce a new synchronization here, we will utilize the fact that
   // we are about to Request Full Power, and since that is synchronized,
   // the expectation is that by the time Request Full Power has completed,
   // all scans will be cancelled.
   hdd_abort_mac_scan( pHddCtx );

   //Disable IMPS/BMPS as we do not want the device to enter any power
   //save mode during shutdown
   sme_DisablePowerSave(pHddCtx->hHal, ePMC_IDLE_MODE_POWER_SAVE);
   sme_DisablePowerSave(pHddCtx->hHal, ePMC_BEACON_MODE_POWER_SAVE);
   sme_DisablePowerSave(pHddCtx->hHal, ePMC_UAPSD_MODE_POWER_SAVE);

   //Ensure that device is in full power as we will touch H/W during vos_Stop
   init_completion(&powerContext.completion);
   powerContext.magic = POWER_CONTEXT_MAGIC;

   halStatus = sme_RequestFullPower(pHddCtx->hHal, hdd_full_power_callback,
                                    &powerContext, eSME_FULL_PWR_NEEDED_BY_HDD);

   if (eHAL_STATUS_SUCCESS != halStatus)
   {
      if (eHAL_STATUS_PMC_PENDING == halStatus)
      {
         /* request was sent -- wait for the response */
         lrc = wait_for_completion_interruptible_timeout(
                                      &powerContext.completion,
                                      msecs_to_jiffies(WLAN_WAIT_TIME_POWER));
         /* either we have a response or we timed out
            either way, first invalidate our magic */
         powerContext.magic = 0;
         if (lrc <= 0)
         {
            hddLog(VOS_TRACE_LEVEL_ERROR, "%s: %s while requesting full power",
                   __FUNCTION__, (0 == lrc) ? "timeout" : "interrupt");
            /* there is a race condition such that the callback
               function could be executing at the same time we are. of
               primary concern is if the callback function had already
               verified the "magic" but hasn't yet set the completion
               variable.  Since the completion variable is on our
               stack, we'll delay just a bit to make sure the data is
               still valid if that is the case */
            msleep(50);
         }
      }
      else
      {
         hddLog(VOS_TRACE_LEVEL_ERROR,
                "%s: Request for Full Power failed, status %d",
                __FUNCTION__, halStatus);
         VOS_ASSERT(0);
         /* continue -- need to clean up as much as possible */
      }
   }

   // Unregister the Net Device Notifier
   unregister_netdevice_notifier(&hdd_netdev_notifier);
   
   hdd_stop_all_adapters( pHddCtx );

#ifdef ANI_BUS_TYPE_SDIO
   sdio_func_dev = libra_getsdio_funcdev();

   if(sdio_func_dev == NULL)
   {
        hddLog(VOS_TRACE_LEVEL_FATAL, "%s: sdio_func_dev is NULL!",__func__);
        VOS_ASSERT(0);
        return;
   }

   sd_claim_host(sdio_func_dev);

   /* Disable SDIO IRQ since we are exiting */
   libra_enable_sdio_irq(sdio_func_dev, 0);

   sd_release_host(sdio_func_dev);
#endif // ANI_BUS_TYPE_SDIO

#ifdef WLAN_BTAMP_FEATURE
   vosStatus = WLANBAP_Stop(pVosContext);
   if (!VOS_IS_STATUS_SUCCESS(vosStatus))
   {
       VOS_TRACE( VOS_MODULE_ID_VOSS, VOS_TRACE_LEVEL_ERROR,
               "%s: Failed to stop BAP",__func__);
   }
#endif //WLAN_BTAMP_FEATURE

   //Stop all the modules
   vosStatus = vos_stop( pVosContext );
   if (!VOS_IS_STATUS_SUCCESS(vosStatus))
   {
      VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_FATAL,
         "%s: Failed to stop VOSS",__func__);
      VOS_ASSERT( VOS_IS_STATUS_SUCCESS( vosStatus ) );
   }

#ifdef ANI_BUS_TYPE_SDIO
   vosStatus = WLANBAL_Stop( pVosContext );

   hddLog(VOS_TRACE_LEVEL_ERROR,"WLAN BAL STOP\n");
   if (!VOS_IS_STATUS_SUCCESS(vosStatus))
   {
      VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_FATAL,
         "%s: Failed to stop BAL",__func__);
      VOS_ASSERT( VOS_IS_STATUS_SUCCESS( vosStatus ) );
   }

    msleep(50);
   //Put the chip is standby before asserting deep sleep
   vosStatus = WLANBAL_SuspendChip( pVosContext );

   hddLog(VOS_TRACE_LEVEL_ERROR,"WLAN Suspend Chip\n");

   if (!VOS_IS_STATUS_SUCCESS(vosStatus))
   {
      VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_FATAL,
         "%s: Failed to suspend chip ",__func__);
      VOS_ASSERT( VOS_IS_STATUS_SUCCESS( vosStatus ) );
   }
   //Invoke SAL stop
   vosStatus = WLANSAL_Stop( pVosContext );
   if (!VOS_IS_STATUS_SUCCESS(vosStatus))
   {
      VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_FATAL,
         "%s: Failed to stop SAL",__func__);
      VOS_ASSERT( VOS_IS_STATUS_SUCCESS( vosStatus ) );
   }

#endif // ANI_BUS_TYPE_SDIO

   //Assert Deep sleep signal now to put Libra HW in lowest power state
   vosStatus = vos_chipAssertDeepSleep( NULL, NULL, NULL );
   VOS_ASSERT( VOS_IS_STATUS_SUCCESS( vosStatus ) );

   //Vote off any PMIC voltage supplies
   vos_chipPowerDown(NULL, NULL, NULL);

   vos_chipVoteOffXOBuffer(NULL, NULL, NULL);

   //Clean up HDD Nlink Service
   send_btc_nlink_msg(WLAN_MODULE_DOWN_IND, 0);
   nl_srv_exit();

   //This requires pMac access, Call this before vos_close().
#ifdef CONFIG_HAS_EARLYSUSPEND
   hdd_unregister_mcast_bcast_filter(pHddCtx);
#endif

   //Close the scheduler before calling vos_close to make sure no thread is 
   // scheduled after the each module close is called i.e after all the data 
   // structures are freed.
   vosStatus = vos_sched_close( pVosContext );
   if (!VOS_IS_STATUS_SUCCESS(vosStatus))    {
      VOS_TRACE( VOS_MODULE_ID_VOSS, VOS_TRACE_LEVEL_FATAL,
         "%s: Failed to close VOSS Scheduler",__func__);
      VOS_ASSERT( VOS_IS_STATUS_SUCCESS( vosStatus ) );
   }

#ifdef WLAN_FEATURE_HOLD_RX_WAKELOCK
   /* Destroy the wake lock */
   wake_lock_destroy(&pHddCtx->rx_wake_lock);
#endif

   //Close VOSS
   //This frees pMac(HAL) context. There should not be any call that requires pMac access after this.
   vos_close(pVosContext);

#ifdef ANI_BUS_TYPE_SDIO
   vosStatus = WLANBAL_Close(pVosContext);
   if (!VOS_IS_STATUS_SUCCESS(vosStatus))
   {
      VOS_TRACE( VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_FATAL, 
          "%s: Failed to close BAL",__func__);
      VOS_ASSERT( VOS_IS_STATUS_SUCCESS( vosStatus ) );
   }
   hddLog(VOS_TRACE_LEVEL_ERROR,"Returned WLAN BAL CLOSE\n\n\n\n");
#endif // ANI_BUS_TYPE_SDIO

   //Close Watchdog
   if(pHddCtx->cfg_ini->fIsLogpEnabled)
      vos_watchdog_close(pVosContext);

   /* Cancel the vote for XO Core ON. 
    * This is done here to ensure there is no race condition since MC, TX and WD threads have
    * exited at this point
    */
   hddLog(VOS_TRACE_LEVEL_WARN, "In module exit: Cancel the vote for XO Core ON"
                                    " when WLAN is turned OFF\n");
   if (vos_chipVoteXOCore(NULL, NULL, NULL, VOS_FALSE) != VOS_STATUS_SUCCESS)
   {
       hddLog(VOS_TRACE_LEVEL_ERROR, "Could not cancel the vote for XO Core ON." 
                                        " Not returning failure."
                                        " Power consumed will be high\n");
   }  

   hdd_close_all_adapters( pHddCtx );


   //Free up dynamically allocated members inside HDD Adapter
   kfree(pHddCtx->cfg_ini);
   pHddCtx->cfg_ini= NULL;

   /* free the power on lock from platform driver */
   if (free_riva_power_on_lock("wlan"))
   {
      hddLog(VOS_TRACE_LEVEL_ERROR, "%s: failed to free power on lock",
                                           __func__);
   }

#ifdef ANI_MANF_DIAG
free_hdd_ctx:   
#endif
#ifdef CONFIG_CFG80211
   wiphy_unregister(wiphy) ; 
   wiphy_free(wiphy) ;
#else
   vos_mem_free( pHddCtx );
#endif
   if (hdd_is_ssr_required())
   {
       /* WDI timeout had happened during unload, so SSR is needed here */
       subsystem_restart("riva");
       msleep(5000);
   }
   hdd_set_ssr_required (VOS_FALSE);
}


/**---------------------------------------------------------------------------

  \brief hdd_update_config_from_nv() - Function to update the contents of
         the running configuration with parameters taken from NV storage

  \param  - pHddCtx - Pointer to the HDD global context

  \return - VOS_STATUS_SUCCESS if successful

  --------------------------------------------------------------------------*/
static VOS_STATUS hdd_update_config_from_nv(hdd_context_t* pHddCtx)
{
#ifndef FEATURE_WLAN_INTEGRATED_SOC
   eHalStatus halStatus;
#endif

#ifdef FEATURE_WLAN_INTEGRATED_SOC
   v_BOOL_t itemIsValid = VOS_FALSE;
   VOS_STATUS status;
   v_MACADDR_t macFromNV[VOS_MAX_CONCURRENCY_PERSONA];
   v_U8_t      macLoop;

   /*If the NV is valid then get the macaddress from nv else get it from qcom_cfg.ini*/
   status = vos_nv_getValidity(VNV_FIELD_IMAGE, &itemIsValid);
   if(status != VOS_STATUS_SUCCESS)
   {
      hddLog(VOS_TRACE_LEVEL_ERROR," vos_nv_getValidity() failed\n ");
       return VOS_STATUS_E_FAILURE;
   }

   if (itemIsValid == VOS_TRUE) 
   {
        hddLog(VOS_TRACE_LEVEL_INFO_HIGH," Reading the Macaddress from NV\n ");
      status = vos_nv_readMultiMacAddress((v_U8_t *)&macFromNV[0].bytes[0],
                                          VOS_MAX_CONCURRENCY_PERSONA);
        if(status != VOS_STATUS_SUCCESS)
        {
         /* Get MAC from NV fail, not update CFG info
          * INI MAC value will be used for MAC setting */
         hddLog(VOS_TRACE_LEVEL_ERROR," vos_nv_readMacAddress() failed\n ");
            return VOS_STATUS_E_FAILURE;
        }

      /* If first MAC is not valid, treat all others are not valid
       * Then all MACs will be got from ini file */
      if(vos_is_macaddr_zero(&macFromNV[0]))
      {
         /* MAC address in NV file is not configured yet */
         hddLog(VOS_TRACE_LEVEL_WARN, "Invalid MAC in NV file");
         return VOS_STATUS_E_INVAL;
   }

      /* Get MAC address from NV, update CFG info */
      for(macLoop = 0; macLoop < VOS_MAX_CONCURRENCY_PERSONA; macLoop++)
      {
         if(vos_is_macaddr_zero(&macFromNV[macLoop]))
         {
            printk(KERN_ERR "not valid MAC from NV for %d", macLoop);
            /* This MAC is not valid, skip it
             * This MAC will be got from ini file */
         }
         else
         {
            vos_mem_copy((v_U8_t *)&pHddCtx->cfg_ini->intfMacAddr[macLoop].bytes[0],
                         (v_U8_t *)&macFromNV[macLoop].bytes[0],
                   VOS_MAC_ADDR_SIZE);
         }
      }
   }
   else
   {
      hddLog(VOS_TRACE_LEVEL_ERROR, "NV ITEM, MAC Not valid");
      return VOS_STATUS_E_FAILURE;
   }
#endif /* FEATURE_WLAN_INTEGRATED_SOC */

#ifndef FEATURE_WLAN_INTEGRATED_SOC
#if 1 /* need to fix for concurrency */
   // Set the MAC Address
   // Currently this is used by HAL to add self sta. Remove this once self sta is added as part of session open.
   halStatus = ccmCfgSetStr( pHddCtx->hHal, WNI_CFG_STA_ID,
                             (v_U8_t *)&pHddCtx->cfg_ini->intfMacAddr[0],
                             sizeof( pHddCtx->cfg_ini->intfMacAddr[0]),
                             hdd_set_mac_addr_cb, VOS_FALSE );

   if (!HAL_STATUS_SUCCESS( halStatus ))
   {
      hddLog(VOS_TRACE_LEVEL_ERROR,"%s: Failed to set MAC Address. "
          "HALStatus is %08d [x%08x]",__func__, halStatus, halStatus );
      return VOS_STATUS_E_FAILURE;
   }
#endif
#endif

   return VOS_STATUS_SUCCESS;
}

/**---------------------------------------------------------------------------

  \brief hdd_post_voss_start_config() - HDD post voss start config helper

  \param  - pAdapter - Pointer to the HDD

  \return - None

  --------------------------------------------------------------------------*/
VOS_STATUS hdd_post_voss_start_config(hdd_context_t* pHddCtx)
{
   eHalStatus halStatus;
   v_U32_t listenInterval;

#ifdef FEATURE_WLAN_NON_INTEGRATED_SOC
   /* In the non-integrated architecture we update the configuration from
      the INI file and from NV after vOSS has been started
   */

   // Apply the cfg.ini to cfg.dat
   if (FALSE == hdd_update_config_dat(pHddCtx))
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: config update failed",__func__ );
      return VOS_STATUS_E_FAILURE;
   }

   // Apply the NV to cfg.dat
   if (VOS_STATUS_SUCCESS != hdd_update_config_from_nv(pHddCtx))
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,
             "%s: config update from NV failed", __func__ );
      return VOS_STATUS_E_FAILURE;
   }
#endif // FEATURE_WLAN_NON_INTEGRATED_SOC

   // Send ready indication to the HDD.  This will kick off the MAC
   // into a 'running' state and should kick off an initial scan.
   halStatus = sme_HDDReadyInd( pHddCtx->hHal );
   if ( !HAL_STATUS_SUCCESS( halStatus ) )
   {
      hddLog(VOS_TRACE_LEVEL_ERROR,"%S: sme_HDDReadyInd() failed with status "
          "code %08d [x%08x]",__func__, halStatus, halStatus );
      return VOS_STATUS_E_FAILURE;
   }

   // Set default LI into HDD context,
   // otherwise under some race condition, HDD will set 0 LI value into RIVA,
   // And RIVA will crash
   wlan_cfgGetInt(pHddCtx->hHal, WNI_CFG_LISTEN_INTERVAL, &listenInterval);
   pHddCtx->hdd_actual_LI_value = listenInterval;
   
   return VOS_STATUS_SUCCESS;
}

#ifdef ANI_BUS_TYPE_SDIO

#ifndef ANI_MANF_DIAG
// Routine to initialize the PMU
void wlan_hdd_enable_deepsleep(v_VOID_t * pVosContext)
{
/*-------------- Need to fix this correctly while doing Deepsleep testing
    tANI_U32 regValue = 0;

    regValue  = QWLAN_PMU_LDO_CTRL_REG_PMU_ANA_DEEP_SLEEP_EN_MASK |
                QWLAN_PMU_LDO_CTRL_REG_PMU_ANA_1P23_LPM_AON_MASK_MASK |
                QWLAN_PMU_LDO_CTRL_REG_PMU_ANA_1P23_LPM_SW_MASK_MASK |
                QWLAN_PMU_LDO_CTRL_REG_PMU_ANA_2P3_LPM_MASK_MASK;

    WLANBAL_WriteRegister(pVosContext, QWLAN_PMU_LDO_CTRL_REG_REG, regValue);
---------------------*/

    return;
}
#endif
#endif

/* wake lock APIs for HDD */
void hdd_prevent_suspend(void)
{
#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,4,5))
    wake_lock(&wlan_wake_lock);
#else
    wcnss_prevent_suspend();
#endif
}

void hdd_allow_suspend(void)
{
#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,4,5))
    wake_unlock(&wlan_wake_lock);
#else
    wcnss_allow_suspend();
#endif
}

/**---------------------------------------------------------------------------

  \brief hdd_wlan_startup() - HDD init function

  This is the driver startup code executed once a WLAN device has been detected

  \param  - dev - Pointer to the underlying device

  \return -  0 for success -1 for failure

  --------------------------------------------------------------------------*/

int hdd_wlan_startup(struct device *dev )
{
   VOS_STATUS status;
   hdd_adapter_t *pAdapter = NULL;
   hdd_adapter_t *pP2pAdapter = NULL;
   hdd_context_t *pHddCtx = NULL;
   v_CONTEXT_t pVosContext= NULL;
#ifdef WLAN_BTAMP_FEATURE
   VOS_STATUS vStatus = VOS_STATUS_SUCCESS;
   WLANBAP_ConfigType btAmpConfig;
   hdd_config_t *pConfig;
#endif
   int ret;
#ifdef CONFIG_CFG80211
   struct wiphy *wiphy;
#endif
#ifdef ANI_BUS_TYPE_SDIO
   struct sdio_func *sdio_func_dev = dev_to_sdio_func(dev);
#endif //ANI_BUS_TYPE_SDIO

   ENTER();
#ifdef CONFIG_CFG80211
   /*
    * cfg80211: wiphy allocation
    */
   wiphy = wlan_hdd_cfg80211_init(sizeof(hdd_context_t)) ;

   if(wiphy == NULL)
   {
      hddLog(VOS_TRACE_LEVEL_ERROR,"%s: cfg80211 init failed", __func__);
      return -1;
   }

   pHddCtx = wiphy_priv(wiphy);

#else      
      
   pHddCtx = vos_mem_malloc ( sizeof( hdd_context_t ) );
   if(pHddCtx == NULL)
   {
      hddLog(VOS_TRACE_LEVEL_ERROR,"%s: cfg80211 init failed", __func__);
      return -1;
   }

#endif   
   //Initialize the adapter context to zeros.
   vos_mem_zero(pHddCtx, sizeof( hdd_context_t ));

#ifdef CONFIG_CFG80211
   pHddCtx->wiphy = wiphy;
#endif
   hdd_prevent_suspend();
   pHddCtx->isLoadUnloadInProgress = TRUE;

   vos_set_load_unload_in_progress(VOS_MODULE_ID_VOSS, TRUE);

   /*Get vos context here bcoz vos_open requires it*/
   pVosContext = vos_get_global_context(VOS_MODULE_ID_SYS, NULL);

   //Save the Global VOSS context in adapter context for future.
   pHddCtx->pvosContext = pVosContext;

   //Save the adapter context in global context for future.
   ((VosContextType*)(pVosContext))->pHDDContext = (v_VOID_t*)pHddCtx;

#ifdef ANI_BUS_TYPE_SDIO
   // Set the private data for the device to our adapter.
   libra_sdio_setprivdata (sdio_func_dev, pHddCtx);
   atomic_set(&pHddCtx->sdio_claim_count, 0);
#endif // ANI_BUS_TYPE_SDIO

   pHddCtx->parent_dev = dev;

   init_completion(&pHddCtx->full_pwr_comp_var);
   init_completion(&pHddCtx->standby_comp_var);
   init_completion(&pHddCtx->req_bmps_comp_var);


   hdd_list_init( &pHddCtx->hddAdapters, MAX_NUMBER_OF_ADAPTERS );

   // Load all config first as TL config is needed during vos_open
   pHddCtx->cfg_ini = (hdd_config_t*) kmalloc(sizeof(hdd_config_t), GFP_KERNEL);
   if(pHddCtx->cfg_ini == NULL)
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: Failed kmalloc hdd_config_t",__func__);
      goto err_free_hdd_context;
   }

   vos_mem_zero(pHddCtx->cfg_ini, sizeof( hdd_config_t ));

   // Read and parse the qcom_cfg.ini file
   status = hdd_parse_config_ini( pHddCtx );
   if ( VOS_STATUS_SUCCESS != status )
   {
      hddLog(VOS_TRACE_LEVEL_FATAL, "%s: error parsing %s",
             __func__, WLAN_INI_FILE);
      goto err_config;
   }

#ifdef CONFIG_CFG80211
   /*
    * cfg80211: Initialization and registration ...
    */
   if (0 < wlan_hdd_cfg80211_register(dev, wiphy, pHddCtx->cfg_ini))
   {
      hddLog(VOS_TRACE_LEVEL_FATAL, 
              "%s: wlan_hdd_cfg80211_register return failure", __func__);
      goto err_wiphy_reg;
   }
#endif

#ifdef FEATURE_WLAN_INTEGRATED_SOC
   // Update WDI trace levels based upon the cfg.ini
   hdd_wdi_trace_enable(eWLAN_MODULE_DAL,
                        pHddCtx->cfg_ini->wdiTraceEnableDAL);
   hdd_wdi_trace_enable(eWLAN_MODULE_DAL_CTRL,
                        pHddCtx->cfg_ini->wdiTraceEnableCTL);
   hdd_wdi_trace_enable(eWLAN_MODULE_DAL_DATA,
                        pHddCtx->cfg_ini->wdiTraceEnableDAT);
   hdd_wdi_trace_enable(eWLAN_MODULE_PAL,
                        pHddCtx->cfg_ini->wdiTraceEnablePAL);
#endif /* FEATURE_WLAN_INTEGRATED_SOC */

#ifdef ANI_MANF_DIAG 
   if(VOS_FTM_MODE == hdd_get_conparam())
  {
      if ( VOS_STATUS_SUCCESS != wlan_hdd_ftm_open(pHddCtx) )
      {
          hddLog(VOS_TRACE_LEVEL_FATAL,"%s: wlan_hdd_ftm_open Failed",__func__);
          goto err_free_hdd_context;
      }
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: FTM driver loaded success fully",__func__);
      return VOS_STATUS_SUCCESS;
  }
#endif

    //Open watchdog module
   if(pHddCtx->cfg_ini->fIsLogpEnabled)
   {
      status = vos_watchdog_open(pVosContext,
         &((VosContextType*)pVosContext)->vosWatchdog, sizeof(VosWatchdogContext));

      if(!VOS_IS_STATUS_SUCCESS( status ))
      {
         hddLog(VOS_TRACE_LEVEL_FATAL,"%s: vos_watchdog_open failed",__func__);
#ifdef CONFIG_CFG80211
         goto err_wiphy_reg;
#else
         goto err_config;
#endif
      }
   }

   pHddCtx->isLogpInProgress = FALSE;
   vos_set_logp_in_progress(VOS_MODULE_ID_VOSS, FALSE);

#ifdef ANI_BUS_TYPE_SDIO
   status = WLANBAL_Open(pHddCtx->pvosContext);
   if(!VOS_IS_STATUS_SUCCESS(status))
   {
     VOS_TRACE( VOS_MODULE_ID_VOSS, VOS_TRACE_LEVEL_ERROR,
        "%s: Failed to open BAL",__func__);
      goto err_wdclose;
   }
#endif // ANI_BUS_TYPE_SDIO

   status = vos_chipVoteOnXOBuffer(NULL, NULL, NULL);
   if(!VOS_IS_STATUS_SUCCESS(status))
   {
      hddLog(VOS_TRACE_LEVEL_FATAL, "%s: Failed to configure 19.2 MHz Clock", __func__);
#ifdef ANI_BUS_TYPE_SDIO
      goto err_balclose;
#else
      goto err_wdclose;
#endif
   }


#ifdef ANI_BUS_TYPE_SDIO
   status = WLANSAL_Start(pHddCtx->pvosContext);
   if (!VOS_IS_STATUS_SUCCESS(status))
   {
      hddLog(VOS_TRACE_LEVEL_FATAL, "%s: Failed to start SAL",__func__);
      goto err_clkvote;
   }

  /* Start BAL */
  status = WLANBAL_Start(pHddCtx->pvosContext);

  if (!VOS_IS_STATUS_SUCCESS(status))
   {
     VOS_TRACE(VOS_MODULE_ID_VOSS, VOS_TRACE_LEVEL_ERROR,
              "%s: Failed to start BAL",__func__);
     goto err_salstop;
  }
#endif // ANI_BUS_TYPE_SDIO

#ifdef MSM_PLATFORM_7x30
   /* FIXME: Volans 2.0 configuration. Reconfigure 1.3v SW supply to 1.3v. It will be configured to
    * 1.4v in vos_ChipPowerup() routine above
    */
#endif

   status = vos_open( &pVosContext, 0);
   if ( !VOS_IS_STATUS_SUCCESS( status ))
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: vos_open failed",__func__);
      goto err_balstop;   
   }

   /* Save the hal context in Adapter */
   pHddCtx->hHal = (tHalHandle)vos_get_context( VOS_MODULE_ID_SME, pVosContext );

   if ( NULL == pHddCtx->hHal )
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: HAL context is null",__func__);      
      goto err_vosclose;
   }

#ifdef FEATURE_WLAN_INTEGRATED_SOC
      /* Vos preStart is calling */
      /* vos preStart which does cfg download should be called before set sme config which accesses/sets some cfgs */
      status = vos_preStart( pHddCtx->pvosContext );
      if ( !VOS_IS_STATUS_SUCCESS( status ) )
      {
         hddLog(VOS_TRACE_LEVEL_FATAL,"%s: vos_preStart failed",__func__);
         goto err_vosclose;
      }
#endif

   // Set the SME configuration parameters...
   status = hdd_set_sme_config( pHddCtx );

   if ( VOS_STATUS_SUCCESS != status )
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: Failed hdd_set_sme_config",__func__); 
         goto err_vosclose;
      }

   //Initialize the WMM module
   status = hdd_wmm_init(pHddCtx);
   if (!VOS_IS_STATUS_SUCCESS(status))
   {
      hddLog(VOS_TRACE_LEVEL_FATAL, "%s: hdd_wmm_init failed", __FUNCTION__);
      goto err_vosclose;
   }

#ifdef FEATURE_WLAN_INTEGRATED_SOC
   /* In the integrated architecture we update the configuration from
      the INI file and from NV before vOSS has been started so that
      the final contents are available to send down to the cCPU   */

   // Apply the cfg.ini to cfg.dat
   if (FALSE == hdd_update_config_dat(pHddCtx))
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: config update failed",__func__ );
      goto err_vosclose;
   }

   // Apply the NV to cfg.dat
   /* Prima Update MAC address only at here */
   if (VOS_STATUS_SUCCESS != hdd_update_config_from_nv(pHddCtx))
   {
#ifdef WLAN_AUTOGEN_MACADDR_FEATURE
      /* There was not a valid set of MAC Addresses in NV.  See if the
         default addresses were modified by the cfg.ini settings.  If so,
         we'll use them, but if not, we'll autogenerate a set of MAC
         addresses based upon the device serial number */

      static const v_MACADDR_t default_address =
         {{0x00, 0x0A, 0xF5, 0x89, 0x89, 0xFF}};
      unsigned int serialno;
      int i;

      serialno = wcnss_get_serial_number();
      if ((0 != serialno) &&
          (0 == memcmp(&default_address, &pHddCtx->cfg_ini->intfMacAddr[0],
                       sizeof(default_address))))
      {
         /* cfg.ini has the default address, invoke autogen logic */

         /* MAC address has 3 bytes of OUI so we have a maximum of 3
            bytes of the serial number that can be used to generate
            the other 3 bytes of the MAC address.  Mask off all but
            the lower 3 bytes (this will also make sure we don't
            overflow in the next step) */
         serialno &= 0x00FFFFFF;

         /* we need a unique address for each session */
         serialno *= VOS_MAX_CONCURRENCY_PERSONA;

         /* autogen all addresses */
         for (i = 0; i < VOS_MAX_CONCURRENCY_PERSONA; i++)
         {
            /* start with the entire default address */
            pHddCtx->cfg_ini->intfMacAddr[i] = default_address;
            /* then replace the lower 3 bytes */
            pHddCtx->cfg_ini->intfMacAddr[i].bytes[3] = (serialno >> 16) & 0xFF;
            pHddCtx->cfg_ini->intfMacAddr[i].bytes[4] = (serialno >> 8) & 0xFF;
            pHddCtx->cfg_ini->intfMacAddr[i].bytes[5] = serialno & 0xFF;

            serialno++;
         }

         pr_info("wlan: Invalid MAC addresses in NV, autogenerated "
                MAC_ADDRESS_STR,
                MAC_ADDR_ARRAY(pHddCtx->cfg_ini->intfMacAddr[0].bytes));
      }
      else
#endif //WLAN_AUTOGEN_MACADDR_FEATURE
      {
      hddLog(VOS_TRACE_LEVEL_ERROR,
                "%s: Invalid MAC address in NV, using MAC from ini file "
                MAC_ADDRESS_STR, __func__,
                MAC_ADDR_ARRAY(pHddCtx->cfg_ini->intfMacAddr[0].bytes));
      }
   }
   {
      eHalStatus halStatus;
      // Set the MAC Address
      // Currently this is used by HAL to add self sta. Remove this once self sta is added as part of session open.
      halStatus = cfgSetStr( pHddCtx->hHal, WNI_CFG_STA_ID,
                             (v_U8_t *)&pHddCtx->cfg_ini->intfMacAddr[0],
                             sizeof( pHddCtx->cfg_ini->intfMacAddr[0]) );
   
      if (!HAL_STATUS_SUCCESS( halStatus ))
      {
         hddLog(VOS_TRACE_LEVEL_ERROR,"%s: Failed to set MAC Address. "
                "HALStatus is %08d [x%08x]",__func__, halStatus, halStatus );
         return VOS_STATUS_E_FAILURE;
      }
   }
#endif // FEATURE_WLAN_INTEGRATED_SOC

   /*Start VOSS which starts up the SME/MAC/HAL modules and everything else
     Note: Firmware image will be read and downloaded inside vos_start API */
   status = vos_start( pHddCtx->pvosContext );
   if ( !VOS_IS_STATUS_SUCCESS( status ) )
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: vos_start failed",__func__);
      goto err_vosclose;
   }

#ifdef FEATURE_WLAN_INTEGRATED_SOC
   /* retrieve and display WCNSS version information */
   do {
      tSirVersionType versionCompiled;
      tSirVersionType versionReported;
      tSirVersionString versionString;
      tANI_U8 fwFeatCapsMsgSupported = 0;
      VOS_STATUS vstatus;

      vstatus = sme_GetWcnssWlanCompiledVersion(pHddCtx->hHal,
                                                &versionCompiled);
      if (!VOS_IS_STATUS_SUCCESS(vstatus))
      {
         hddLog(VOS_TRACE_LEVEL_FATAL,
                "%s: unable to retrieve WCNSS WLAN compiled version",
                __FUNCTION__);
         break;
      }

      vstatus = sme_GetWcnssWlanReportedVersion(pHddCtx->hHal,
                                                &versionReported);
      if (!VOS_IS_STATUS_SUCCESS(vstatus))
      {
         hddLog(VOS_TRACE_LEVEL_FATAL,
                "%s: unable to retrieve WCNSS WLAN reported version",
                __FUNCTION__);
         break;
      }

      if ((versionCompiled.major != versionReported.major) ||
          (versionCompiled.minor != versionReported.minor) ||
          (versionCompiled.version != versionReported.version) ||
          (versionCompiled.revision != versionReported.revision))
      {
         pr_err("%s: WCNSS WLAN Version %u.%u.%u.%u, "
                "Host expected %u.%u.%u.%u\n",
                WLAN_MODULE_NAME,
                (int)versionReported.major,
                (int)versionReported.minor,
                (int)versionReported.version,
                (int)versionReported.revision,
                (int)versionCompiled.major,
                (int)versionCompiled.minor,
                (int)versionCompiled.version,
                (int)versionCompiled.revision);
      }
      else
      {
         pr_info("%s: WCNSS WLAN version %u.%u.%u.%u\n",
                 WLAN_MODULE_NAME,
                 (int)versionReported.major,
                 (int)versionReported.minor,
                 (int)versionReported.version,
                 (int)versionReported.revision);
      }

      vstatus = sme_GetWcnssSoftwareVersion(pHddCtx->hHal,
                                            versionString,
                                            sizeof(versionString));
      if (!VOS_IS_STATUS_SUCCESS(vstatus))
      {
         hddLog(VOS_TRACE_LEVEL_FATAL,
                "%s: unable to retrieve WCNSS software version string",
                __FUNCTION__);
         break;
      }

      pr_info("%s: WCNSS software version %s\n",
              WLAN_MODULE_NAME, versionString);

      vstatus = sme_GetWcnssHardwareVersion(pHddCtx->hHal,
                                            versionString,
                                            sizeof(versionString));
      if (!VOS_IS_STATUS_SUCCESS(vstatus))
      {
         hddLog(VOS_TRACE_LEVEL_FATAL,
                "%s: unable to retrieve WCNSS hardware version string",
                __FUNCTION__);
         break;
      }

      pr_info("%s: WCNSS hardware version %s\n",
              WLAN_MODULE_NAME, versionString);

      /* 1.Check if FW version is greater than 0.1.1.0. Only then send host-FW capability exchange message 
              2.Host-FW capability exchange message  is only present on riva 1.1 so 
                send the message only if it the riva is 1.1
                minor numbers for different riva branches:
                0 -> (1.0)Mainline Build
                1 -> (1.1)Mainline Build
                2->(1.04) Stability Build
         */
      if (((versionReported.major>0) || (versionReported.minor>1) || 
         ((versionReported.minor>=1) && (versionReported.version>=1)))
         && ((versionReported.major == 1) && (versionReported.minor >= 1)))
         fwFeatCapsMsgSupported = 1;
      if (fwFeatCapsMsgSupported)
         sme_featureCapsExchange(pHddCtx->hHal);
   } while (0);

#endif // FEATURE_WLAN_INTEGRATED_SOC

   status = hdd_post_voss_start_config( pHddCtx );
   if ( !VOS_IS_STATUS_SUCCESS( status ) )
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: hdd_post_voss_start_config failed", 
         __func__);
      goto err_vosstop;
   }

#ifdef WLAN_SOFTAP_FEATURE
   if (VOS_STA_SAP_MODE == hdd_get_conparam())
   {
     pAdapter = hdd_open_adapter( pHddCtx, WLAN_HDD_SOFTAP, "softap.%d", 
         wlan_hdd_get_intf_addr(pHddCtx), FALSE );
   }
   else
   {
#endif
     pAdapter = hdd_open_adapter( pHddCtx, WLAN_HDD_INFRA_STATION, "wlan%d",
         wlan_hdd_get_intf_addr(pHddCtx), FALSE );
     if (pAdapter != NULL)
     {
#ifdef WLAN_FEATURE_P2P
         if ( pHddCtx->cfg_ini->isP2pDeviceAddrAdministrated )
         {
             vos_mem_copy( pHddCtx->p2pDeviceAddress.bytes,
                       pHddCtx->cfg_ini->intfMacAddr[0].bytes,
                       sizeof(tSirMacAddr));
             /* Generate the P2P Device Address.  This consists of the device's
              * primary MAC address with the locally administered bit set.
              */
             pHddCtx->p2pDeviceAddress.bytes[0] |= 0x02;
         }
         else
         {
             tANI_U8* p2p_dev_addr = wlan_hdd_get_intf_addr(pHddCtx);
             if (p2p_dev_addr != NULL)
             {
                vos_mem_copy(&pHddCtx->p2pDeviceAddress.bytes[0],
                             p2p_dev_addr, VOS_MAC_ADDR_SIZE);
             }
             else
             {
                hddLog(VOS_TRACE_LEVEL_FATAL,
                    "%s: Failed to allocate mac_address for p2p_device",
                    __FUNCTION__);
                goto err_close_adapter;
             }
         }

         pP2pAdapter = hdd_open_adapter( pHddCtx, WLAN_HDD_P2P_DEVICE, "p2p%d",
                           &pHddCtx->p2pDeviceAddress.bytes[0], FALSE );
         if ( NULL == pP2pAdapter )
         {
             hddLog(VOS_TRACE_LEVEL_FATAL,
                "%s: Failed to do hdd_open_adapter for P2P Device Interface",
                __FUNCTION__);
             goto err_close_adapter;
         }
#endif
     }
#ifdef WLAN_SOFTAP_FEATURE
   }
#endif

   if( pAdapter == NULL )
   {
     hddLog(VOS_TRACE_LEVEL_ERROR,"%s: hdd_open_adapter failed",__func__);
#ifdef ANI_BUS_TYPE_SDIO
     goto err_balstop;
#else
     goto err_clkvote;
#endif
   }

#ifdef WLAN_BTAMP_FEATURE
   vStatus = WLANBAP_Open(pVosContext);
   if(!VOS_IS_STATUS_SUCCESS(vStatus))
   {
     VOS_TRACE( VOS_MODULE_ID_VOSS, VOS_TRACE_LEVEL_ERROR,
        "%s: Failed to open BAP",__func__);
      goto err_close_adapter;
   }

   vStatus = BSL_Init(pVosContext);
   if(!VOS_IS_STATUS_SUCCESS(vStatus))
   {
     VOS_TRACE( VOS_MODULE_ID_VOSS, VOS_TRACE_LEVEL_ERROR,
        "%s: Failed to Init BSL",__func__);
     goto err_bap_close;
   }
   vStatus = WLANBAP_Start(pVosContext);
   if (!VOS_IS_STATUS_SUCCESS(vStatus))
   {
       VOS_TRACE( VOS_MODULE_ID_VOSS, VOS_TRACE_LEVEL_ERROR,
               "%s: Failed to start TL",__func__);
       goto err_bap_close;
   }

   pConfig = pHddCtx->cfg_ini;
   btAmpConfig.ucPreferredChannel = pConfig->preferredChannel;
   status = WLANBAP_SetConfig(&btAmpConfig);

#endif //WLAN_BTAMP_FEATURE

#ifdef FEATURE_WLAN_SCAN_PNO
   /*SME must send channel update configuration to RIVA*/
   sme_UpdateChannelConfig(pHddCtx->hHal); 
#endif

#ifdef FEATURE_WLAN_INTEGRATED_SOC
   /* Register with platform driver as client for Suspend/Resume */
   status = hddRegisterPmOps(pHddCtx);
   if ( !VOS_IS_STATUS_SUCCESS( status ) )
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: hddRegisterPmOps failed",__func__);
#ifdef WLAN_BTAMP_FEATURE
      goto err_bap_stop;
#else
      goto err_close_adapter; 
#endif //WLAN_BTAMP_FEATURE
   }

   /* Register TM level change handler function to the platform */
   status = hddDevTmRegisterNotifyCallback(pHddCtx);
   if ( !VOS_IS_STATUS_SUCCESS( status ) )
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: hddDevTmRegisterNotifyCallback failed",__func__);
      goto err_unregister_pmops;
   }
#endif

   /* register for riva power on lock to platform driver */
   if (req_riva_power_on_lock("wlan"))
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: req riva power on lock failed",
                                     __func__);
      goto err_unregister_pmops;
   }

#ifdef CONFIG_HAS_EARLYSUSPEND
   // Register suspend/resume callbacks
   if(pHddCtx->cfg_ini->nEnableSuspend)
   {
      register_wlan_suspend();
   }
#endif

   // register net device notifier for device change notification
   ret = register_netdevice_notifier(&hdd_netdev_notifier);

   if(ret < 0)
   {
      hddLog(VOS_TRACE_LEVEL_ERROR,"%s: register_netdevice_notifier failed",__func__);
      goto err_free_power_on_lock;
   }

   //Initialize the nlink service
   if(nl_srv_init() != 0)
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%S: nl_srv_init failed",__func__);
      goto err_reg_netdev;
   }

   //Initialize the BTC service
   if(btc_activate_service(pHddCtx) != 0)
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: btc_activate_service failed",__func__);
      goto err_nl_srv;
   }

#ifdef PTT_SOCK_SVC_ENABLE
   //Initialize the PTT service
   if(ptt_sock_activate_svc(pHddCtx) != 0)
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: ptt_sock_activate_svc failed",__func__);
      goto err_nl_srv;
   }
#endif

   //Initialize the WoWL service
   if(!hdd_init_wowl(pHddCtx))
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: hdd_init_wowl failed",__func__);
      goto err_nl_srv;
   }

#ifdef CONFIG_HAS_EARLYSUSPEND
   hdd_register_mcast_bcast_filter(pHddCtx);
#endif
#ifdef CONFIG_CFG80211
#ifdef WLAN_SOFTAP_FEATURE
   if (VOS_STA_SAP_MODE != hdd_get_conparam())
#endif
   {
      wlan_hdd_cfg80211_post_voss_start(pP2pAdapter);
   }
#endif

   mutex_init(&pHddCtx->sap_lock);

   pHddCtx->isLoadUnloadInProgress = FALSE;

#ifdef WLAN_FEATURE_HOLD_RX_WAKELOCK
   /* Initialize the wake lcok */
   wake_lock_init(&pHddCtx->rx_wake_lock,
           WAKE_LOCK_SUSPEND,
           "qcom_rx_wakelock");
#endif

   vos_event_init(&pAdapter->scan_info.scan_finished_event);
   pAdapter->scan_info.scan_pending_option = WEXT_SCAN_PENDING_GIVEUP;

   vos_set_load_unload_in_progress(VOS_MODULE_ID_VOSS, FALSE);
   hdd_allow_suspend();
   
   // Initialize the restart logic
   wlan_hdd_restart_init(pHddCtx);
  
   goto success;

err_nl_srv:
   nl_srv_exit();

err_reg_netdev:
   unregister_netdevice_notifier(&hdd_netdev_notifier);

err_free_power_on_lock:
   free_riva_power_on_lock("wlan");

err_unregister_pmops:
   hddDevTmUnregisterNotifyCallback(pHddCtx);
   hddDeregisterPmOps(pHddCtx);

#ifdef WLAN_BTAMP_FEATURE
err_bap_stop:
  WLANBAP_Stop(pVosContext);
#endif

#ifdef WLAN_BTAMP_FEATURE
err_bap_close:
   WLANBAP_Close(pVosContext);
#endif

err_close_adapter:
   hdd_close_all_adapters( pHddCtx );

err_vosstop:
   vos_stop(pVosContext);

err_vosclose:    
   status = vos_sched_close( pVosContext );
   if (!VOS_IS_STATUS_SUCCESS(status))    {
      VOS_TRACE( VOS_MODULE_ID_VOSS, VOS_TRACE_LEVEL_FATAL,
         "%s: Failed to close VOSS Scheduler", __func__);
      VOS_ASSERT( VOS_IS_STATUS_SUCCESS( status ) );
   }
   vos_close(pVosContext ); 

err_balstop:
#ifdef ANI_BUS_TYPE_SDIO
#ifndef ANI_MANF_DIAG
       wlan_hdd_enable_deepsleep(pHddCtx->pvosContext);
#endif

   WLANBAL_Stop(pHddCtx->pvosContext);
   WLANBAL_SuspendChip(pHddCtx->pvosContext);
#endif

#ifdef ANI_BUS_TYPE_SDIO
err_salstop:
   WLANSAL_Stop(pHddCtx->pvosContext);

#endif
err_clkvote:
    vos_chipVoteOffXOBuffer(NULL, NULL, NULL);

#ifdef ANI_BUS_TYPE_SDIO
err_balclose:
   WLANBAL_Close(pHddCtx->pvosContext);
#endif // ANI_BUS_TYPE_SDIO

err_wdclose:
   if(pHddCtx->cfg_ini->fIsLogpEnabled)
      vos_watchdog_close(pVosContext);

#ifdef CONFIG_CFG80211
err_wiphy_reg:
   wiphy_unregister(wiphy) ; 
#endif

err_config:
   kfree(pHddCtx->cfg_ini);
   pHddCtx->cfg_ini= NULL;

err_free_hdd_context:
   hdd_allow_suspend();
#ifdef CONFIG_CFG80211
   wiphy_free(wiphy) ;
   //kfree(wdev) ;
#else
   vos_mem_free( pHddCtx );
#endif
   VOS_BUG(1);

   return -1;

success:
   EXIT();
   return 0;
}

/**---------------------------------------------------------------------------

  \brief hdd_module_init() - Init Function

   This is the driver entry point (invoked when module is loaded using insmod)

  \param  - None

  \return - 0 for success, non zero for failure

  --------------------------------------------------------------------------*/

static int __init hdd_module_init ( void)
{
   VOS_STATUS status;
   v_CONTEXT_t pVosContext = NULL;
#ifdef ANI_BUS_TYPE_SDIO
   struct sdio_func *sdio_func_dev = NULL;
   unsigned int attempts = 0;
#endif // ANI_BUS_TYPE_SDIO
   struct device *dev = NULL;
   int ret_status = 0;

   ENTER();

#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,4,5))
   wake_lock_init(&wlan_wake_lock, WAKE_LOCK_SUSPEND, "wlan");
#endif

   pr_info("%s: loading driver v%s\n", WLAN_MODULE_NAME,
           QWLAN_VERSIONSTR TIMER_MANAGER_STR MEMORY_DEBUG_STR);

   //Power Up Libra WLAN card first if not already powered up
   status = vos_chipPowerUp(NULL,NULL,NULL);
   if (!VOS_IS_STATUS_SUCCESS(status))
   {
      hddLog(VOS_TRACE_LEVEL_FATAL, "%s: Libra WLAN not Powered Up. "
          "exiting", __func__);
      return -1;
   }

#ifdef ANI_BUS_TYPE_SDIO
   //SDIO Polling should be turned on for card detection. When using Android Wi-Fi GUI
   //users need not trigger SDIO polling explicitly. However when loading drivers via
   //command line (Adb shell), users must turn on SDIO polling prior to loading WLAN.
   do {
      sdio_func_dev = libra_getsdio_funcdev();
      if (NULL == sdio_func_dev) {
         hddLog(VOS_TRACE_LEVEL_FATAL, "%s: Libra WLAN not detected yet.",__func__);
         attempts++;
      }
      else {
         hddLog(VOS_TRACE_LEVEL_FATAL, "%s: Libra WLAN detecton succeeded",__func__);
         dev = &sdio_func_dev->dev;
         break;
      }

      if(attempts == 7)
         break;

      msleep(250);

   }while (attempts < 7);

   //Retry to detect the card again by Powering Down the chip and Power up the chip
   //again. This retry is done to recover from CRC Error
   if (NULL == sdio_func_dev) {

      attempts = 0;

      //Vote off any PMIC voltage supplies
      vos_chipPowerDown(NULL, NULL, NULL);

      msleep(1000);

      //Power Up Libra WLAN card first if not already powered up
      status = vos_chipPowerUp(NULL,NULL,NULL);
      if (!VOS_IS_STATUS_SUCCESS(status))
      {
         hddLog(VOS_TRACE_LEVEL_FATAL, "%s: Retry Libra WLAN not Powered Up. "
             "exiting", __func__);
         return -1;
      }

      do {
         sdio_func_dev = libra_getsdio_funcdev();
         if (NULL == sdio_func_dev) {
            hddLog(VOS_TRACE_LEVEL_FATAL, "%s: Retry Libra WLAN not detected yet.",__func__);
            attempts++;
         }
         else {
            hddLog(VOS_TRACE_LEVEL_FATAL, "%s: Retry Libra WLAN detecton succeeded",__func__);
            dev = &sdio_func_dev->dev;
            break;
         }

         if(attempts == 2)
           break;

         msleep(1000);

      }while (attempts < 3);
   }

#endif // ANI_BUS_TYPE_SDIO

#ifdef ANI_BUS_TYPE_PCI

   dev = wcnss_wlan_get_device();

#endif // ANI_BUS_TYPE_PCI

#ifdef ANI_BUS_TYPE_PLATFORM
   dev = wcnss_wlan_get_device();
#endif // ANI_BUS_TYPE_PLATFORM


   do {
      if (NULL == dev) {
         hddLog(VOS_TRACE_LEVEL_FATAL, "%s: WLAN device not found!!",__func__);
         ret_status = -1;
         break;
   }

#ifdef MEMORY_DEBUG
      vos_mem_init();
#endif

#ifdef TIMER_MANAGER
      vos_timer_manager_init();
#endif

      /* Preopen VOSS so that it is ready to start at least SAL */
      status = vos_preOpen(&pVosContext);

   if (!VOS_IS_STATUS_SUCCESS(status))
   {
         hddLog(VOS_TRACE_LEVEL_FATAL,"%s: Failed to preOpen VOSS", __func__);
         ret_status = -1;
         break;
   }

#ifdef ANI_BUS_TYPE_SDIO
   /* Now Open SAL */
   status = WLANSAL_Open(pVosContext, 0);

   if(!VOS_IS_STATUS_SUCCESS(status))
   {
         hddLog(VOS_TRACE_LEVEL_FATAL,"%s: Failed to open SAL", __func__);

      /* If unable to open, cleanup and return failure */
      vos_preClose( &pVosContext );
         ret_status = -1;
         break;
   }
#endif // ANI_BUS_TYPE_SDIO

#if defined(FEATURE_WLAN_INTEGRATED_SOC) && defined(ANI_MANF_DIAG)
      if(5 == con_mode)
      {
         hdd_set_conparam(VOS_FTM_MODE);
      }
#endif /* FEATURE_WLAN_INTEGRATED_SOC && ANI_MANF_DIAG */

      // Call our main init function
      if(hdd_wlan_startup(dev)) {
         hddLog(VOS_TRACE_LEVEL_FATAL,"%s: WLAN Driver Initialization failed",
          __func__);
#ifdef ANI_BUS_TYPE_SDIO
         WLANSAL_Close(pVosContext);
#endif // ANI_BUS_TYPE_SDIO
         vos_preClose( &pVosContext );
         ret_status = -1;
         break;
      }

      /* Cancel the vote for XO Core ON
       * This is done here for safety purposes in case we re-initialize without turning
       * it OFF in any error scenario.
       */
      hddLog(VOS_TRACE_LEVEL_ERROR, "In module init: Ensure Force XO Core is OFF"
                                       " when  WLAN is turned ON so Core toggles"
                                       " unless we enter PS\n");
      if (vos_chipVoteXOCore(NULL, NULL, NULL, VOS_FALSE) != VOS_STATUS_SUCCESS)
      {
          hddLog(VOS_TRACE_LEVEL_ERROR, "Could not cancel XO Core ON vote. Not returning failure."
                                            " Power consumed will be high\n");
      }
   } while (0);

   if (0 != ret_status)
   {
      //Assert Deep sleep signal now to put Libra HW in lowest power state
      status = vos_chipAssertDeepSleep( NULL, NULL, NULL );
      VOS_ASSERT( VOS_IS_STATUS_SUCCESS( status) );

      //Vote off any PMIC voltage supplies
      vos_chipPowerDown(NULL, NULL, NULL);
#ifdef TIMER_MANAGER
      vos_timer_exit();
#endif
#ifdef MEMORY_DEBUG
      vos_mem_exit();
#endif

#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,4,5))
      wake_lock_destroy(&wlan_wake_lock);
#endif
      pr_err("%s: driver load failure\n", WLAN_MODULE_NAME);
   }
   else
   {
      //Send WLAN UP indication to Nlink Service
      send_btc_nlink_msg(WLAN_MODULE_UP_IND, 0);

      pr_info("%s: driver loaded\n", WLAN_MODULE_NAME);

   }

   EXIT();

   return ret_status;
}


/**---------------------------------------------------------------------------

  \brief hdd_module_exit() - Exit function

  This is the driver exit point (invoked when module is unloaded using rmmod)

  \param  - None

  \return - None

  --------------------------------------------------------------------------*/
static void __exit hdd_module_exit(void)
{
   hdd_context_t *pHddCtx = NULL;
   v_CONTEXT_t pVosContext = NULL;

   pr_info("%s: unloading driver v%s\n", WLAN_MODULE_NAME, QWLAN_VERSIONSTR);

   //Get the global vos context
   pVosContext = vos_get_global_context(VOS_MODULE_ID_SYS, NULL);

   if(!pVosContext)
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: Global VOS context is Null", __func__);
      goto done;
   }

   //Get the HDD context.
   pHddCtx = (hdd_context_t *)vos_get_context(VOS_MODULE_ID_HDD, pVosContext );

   if(!pHddCtx)
   {
      hddLog(VOS_TRACE_LEVEL_FATAL,"%s: module exit called before probe",__func__);
   }
   else
   {
      /* module exit should never proceed if SSR is not completed */
      while(isWDresetInProgress()){
         VOS_TRACE(VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_FATAL, "%s:SSR in Progress; block rmmod for 1 second!!!",__func__);
         msleep(1000);
       }

      pHddCtx->isLoadUnloadInProgress = TRUE;
      vos_set_load_unload_in_progress(VOS_MODULE_ID_VOSS, TRUE);

      //Do all the cleanup before deregistering the driver
      hdd_wlan_exit(pHddCtx);
   }

#ifdef ANI_BUS_TYPE_SDIO
   WLANSAL_Close(pVosContext);
#endif // ANI_BUS_TYPE_SDIO

   vos_preClose( &pVosContext );

#ifdef TIMER_MANAGER
   vos_timer_exit();
#endif
#ifdef MEMORY_DEBUG
   vos_mem_exit();
#endif

done:
#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,4,5))
   wake_lock_destroy(&wlan_wake_lock);
#endif
   pr_info("%s: driver unloaded\n", WLAN_MODULE_NAME);
}

#if defined(WLAN_SOFTAP_FEATURE) || defined(ANI_MANF_DIAG)
/**---------------------------------------------------------------------------

  \brief hdd_get_conparam() -

  This is the driver exit point (invoked when module is unloaded using rmmod)

  \param  - None

  \return - tVOS_CON_MODE

  --------------------------------------------------------------------------*/
tVOS_CON_MODE hdd_get_conparam ( void )
{
    return (tVOS_CON_MODE)con_mode;

}
void hdd_set_conparam ( v_UINT_t newParam )
{
  con_mode = newParam;
}
/**---------------------------------------------------------------------------

  \brief hdd_softap_sta_deauth() - function

  This to take counter measure to handle deauth req from HDD

  \param  - pAdapter - Pointer to the HDD

  \param  - enable - boolean value

  \return - None

  --------------------------------------------------------------------------*/

void hdd_softap_sta_deauth(hdd_adapter_t *pAdapter, v_U8_t *pDestMacAddress)
{
    v_U8_t STAId;
    v_CONTEXT_t pVosContext = (WLAN_HDD_GET_CTX(pAdapter))->pvosContext;
#ifdef FEATURE_WLAN_NON_INTEGRATED_SOC
    tHalHandle hHalHandle;
#endif

    ENTER();

    hddLog( LOGE, "hdd_softap_sta_deauth:(0x%x, false)", (WLAN_HDD_GET_CTX(pAdapter))->pvosContext);

    //Ignore request to deauth bcmc station
    if( pDestMacAddress[0] & 0x1 )
       return;

    WLANSAP_DeauthSta(pVosContext,pDestMacAddress);

    /*Get the Station ID*/
#ifdef FEATURE_WLAN_NON_INTEGRATED_SOC
    hHalHandle = (tHalHandle ) vos_get_context(VOS_MODULE_ID_HAL, pVosContext);
    if (eHAL_STATUS_SUCCESS ==
        halTable_FindStaidByAddr(hHalHandle, (tANI_U8 *)pDestMacAddress,
                                 &STAId))
    {
       hdd_softap_DeregisterSTA(pAdapter, STAId);
    }
#else
    if (VOS_STATUS_SUCCESS ==
        hdd_softap_GetStaId(pAdapter, (v_MACADDR_t *)pDestMacAddress,
                            &STAId))
    {
      hdd_softap_DeregisterSTA(pAdapter, STAId);
    }
#endif

    EXIT();
}

/**---------------------------------------------------------------------------

  \brief hdd_softap_sta_disassoc() - function

  This to take counter measure to handle deauth req from HDD

  \param  - pAdapter - Pointer to the HDD

  \param  - enable - boolean value

  \return - None

  --------------------------------------------------------------------------*/

void hdd_softap_sta_disassoc(hdd_adapter_t *pAdapter,v_U8_t *pDestMacAddress)
{
        v_CONTEXT_t pVosContext = (WLAN_HDD_GET_CTX(pAdapter))->pvosContext;

    ENTER();

    hddLog( LOGE, "hdd_softap_sta_disassoc:(0x%x, false)", (WLAN_HDD_GET_CTX(pAdapter))->pvosContext);

    //Ignore request to disassoc bcmc station
    if( pDestMacAddress[0] & 0x1 )
       return;

    WLANSAP_DisassocSta(pVosContext,pDestMacAddress);
}

void hdd_softap_tkip_mic_fail_counter_measure(hdd_adapter_t *pAdapter,v_BOOL_t enable)
{
    v_CONTEXT_t pVosContext = (WLAN_HDD_GET_CTX(pAdapter))->pvosContext;

    ENTER();

    hddLog( LOGE, "hdd_softap_tkip_mic_fail_counter_measure:(0x%x, false)", (WLAN_HDD_GET_CTX(pAdapter))->pvosContext);

    WLANSAP_SetCounterMeasure(pVosContext, (v_BOOL_t)enable);
}

#endif /* WLAN_SOFTAP_FEATURE */
/**---------------------------------------------------------------------------
 *
 *   \brief hdd_get__concurrency_mode() -
 *
 *
 *   \param  - None
 *
 *   \return - CONCURRENCY MODE
 *
 * --------------------------------------------------------------------------*/
tVOS_CONCURRENCY_MODE hdd_get_concurrency_mode ( void )
{
    v_CONTEXT_t pVosContext = vos_get_global_context( VOS_MODULE_ID_HDD, NULL );
    hdd_context_t *pHddCtx;

    if (NULL != pVosContext)
    {
       pHddCtx = vos_get_context( VOS_MODULE_ID_HDD, pVosContext);
       if (NULL != pHddCtx)
       {
          return (tVOS_CONCURRENCY_MODE)pHddCtx->concurrency_mode;
       }
    }

    /* we are in an invalid state :( */
    hddLog(LOGE, "%s: Invalid context", __FUNCTION__);
    return VOS_STA;
}

/* Decide whether to allow/not the apps power collapse. 
 * Allow apps power collapse if we are in connected state.
 * if not, allow only if we are in IMPS  */
v_BOOL_t hdd_is_apps_power_collapse_allowed(hdd_context_t* pHddCtx)
{
    tPmcState pmcState = pmcGetPmcState(pHddCtx->hHal);
    hdd_config_t *pConfig = pHddCtx->cfg_ini;
    hdd_adapter_list_node_t *pAdapterNode = NULL, *pNext = NULL; 
    hdd_adapter_t *pAdapter = NULL; 
    VOS_STATUS status;

#ifdef WLAN_SOFTAP_FEATURE
    if (VOS_STA_SAP_MODE == hdd_get_conparam())
        return TRUE;
#endif

    /*loop through all adapters. TBD fix for Concurrency */
    status = hdd_get_front_adapter ( pHddCtx, &pAdapterNode );
    while ( NULL != pAdapterNode && VOS_STATUS_SUCCESS == status )
    {
        pAdapter = pAdapterNode->pAdapter;
        if ( (WLAN_HDD_INFRA_STATION == pAdapter->device_mode)
          || (WLAN_HDD_P2P_CLIENT == pAdapter->device_mode) )
        {
            if ((pConfig->fIsImpsEnabled || pConfig->fIsBmpsEnabled)
                 && (pmcState != IMPS && pmcState != BMPS
                 &&  pmcState != STOPPED && pmcState != STANDBY))
            {
                return FALSE;
            }
        }
        status = hdd_get_next_adapter ( pHddCtx, pAdapterNode, &pNext );
        pAdapterNode = pNext;
    }
    return TRUE;
}

void wlan_hdd_set_concurrency_mode(hdd_context_t *pHddCtx, tVOS_CON_MODE mode)
{
   switch(mode)
   {
       case WLAN_HDD_INFRA_STATION:
#ifdef WLAN_FEATURE_P2P
       case WLAN_HDD_P2P_CLIENT:
       case WLAN_HDD_P2P_GO:
#endif
       case WLAN_HDD_SOFTAP:
            pHddCtx->concurrency_mode |= (1 << mode);
            pHddCtx->no_of_sessions[mode]++;
            break;
       default:
            break;

   }
   VOS_TRACE(VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_INFO, "%s: concurrency_mode = 0x%x NumberofSessions for mode %d = %d",
    __func__,pHddCtx->concurrency_mode,mode,pHddCtx->no_of_sessions[mode]);
}


void wlan_hdd_clear_concurrency_mode(hdd_context_t *pHddCtx, tVOS_CON_MODE mode)
{
   switch(mode)
   {
       case WLAN_HDD_INFRA_STATION:
#ifdef WLAN_FEATURE_P2P
       case WLAN_HDD_P2P_CLIENT:
       case WLAN_HDD_P2P_GO:
#endif
       case WLAN_HDD_SOFTAP:
    pHddCtx->no_of_sessions[mode]--;
    if (!(pHddCtx->no_of_sessions[mode]))
            pHddCtx->concurrency_mode &= (~(1 << mode));
            break;
       default:
            break;
   }
   VOS_TRACE(VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_INFO, "%s: concurrency_mode = 0x%x NumberofSessions for mode %d = %d",
    __func__,pHddCtx->concurrency_mode,mode,pHddCtx->no_of_sessions[mode]);
}

/**---------------------------------------------------------------------------
 *
 *   \brief wlan_hdd_restart_init
 *
 *   This function initalizes restart timer/flag. An internal function.
 *
 *   \param  - pHddCtx
 *
 *   \return - None
 *             
 * --------------------------------------------------------------------------*/

static void wlan_hdd_restart_init(hdd_context_t *pHddCtx)
{
   /* Initialize */
   pHddCtx->hdd_restart_retries = 0;
   atomic_set(&pHddCtx->isRestartInProgress, 0);
   vos_timer_init(&pHddCtx->hdd_restart_timer, 
                     VOS_TIMER_TYPE_SW, 
                     wlan_hdd_restart_timer_cb,
                     pHddCtx);
}
/**---------------------------------------------------------------------------
 *
 *   \brief wlan_hdd_restart_deinit
 *
 *   This function cleans up the resources used. An internal function.
 *
 *   \param  - pHddCtx
 *
 *   \return - None
 *             
 * --------------------------------------------------------------------------*/

static void wlan_hdd_restart_deinit(hdd_context_t* pHddCtx)
{
 
   VOS_STATUS vos_status;
   /* Block any further calls */
   atomic_set(&pHddCtx->isRestartInProgress, 1);
   /* Cleanup */
   vos_status = vos_timer_stop( &pHddCtx->hdd_restart_timer );
   if (!VOS_IS_STATUS_SUCCESS(vos_status))
          hddLog(LOGE, FL("Failed to stop HDD restart timer\n"));
   vos_status = vos_timer_destroy(&pHddCtx->hdd_restart_timer);
   if (!VOS_IS_STATUS_SUCCESS(vos_status))
          hddLog(LOGE, FL("Failed to destroy HDD restart timer\n"));

}

/**---------------------------------------------------------------------------
 *
 *   \brief wlan_hdd_framework_restart
 *
 *   This function uses a cfg80211 API to start a framework initiated WLAN
 *   driver module unload/load.
 *
 *   Also this API keep retrying (WLAN_HDD_RESTART_RETRY_MAX_CNT).
 *
 *
 *   \param  - pHddCtx
 *
 *   \return - VOS_STATUS_SUCCESS: Success
 *             VOS_STATUS_E_EMPTY: Adapter is Empty
 *             VOS_STATUS_E_NOMEM: No memory

 * --------------------------------------------------------------------------*/

static VOS_STATUS wlan_hdd_framework_restart(hdd_context_t *pHddCtx) 
{
   VOS_STATUS status = VOS_STATUS_SUCCESS;
   hdd_adapter_list_node_t *pAdapterNode = NULL, *pNext = NULL;
   int len = (sizeof (struct ieee80211_mgmt));
   struct ieee80211_mgmt *mgmt = NULL; 
   
   /* Prepare the DEAUTH managment frame with reason code */
   mgmt =  kzalloc(len, GFP_KERNEL);
   if(mgmt == NULL) 
   {
      VOS_TRACE(VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_FATAL, 
            "%s: memory allocatoin failed (%d bytes)", __func__, len);
      return VOS_STATUS_E_NOMEM;
   }
   mgmt->u.deauth.reason_code = WLAN_REASON_DISASSOC_LOW_ACK;

   /* Iterate over all adapters/devices */
   status =  hdd_get_front_adapter ( pHddCtx, &pAdapterNode );
   do 
   {
      if( (status == VOS_STATUS_SUCCESS) && 
                           pAdapterNode  && 
                           pAdapterNode->pAdapter)
      {
         VOS_TRACE(VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_FATAL, 
               "restarting the driver(intf:\'%s\' mode:%d :try %d)",
               pAdapterNode->pAdapter->dev->name,
               pAdapterNode->pAdapter->device_mode,
               pHddCtx->hdd_restart_retries + 1);
         /* 
          * CFG80211 event to restart the driver
          * 
          * 'cfg80211_send_unprot_deauth' sends a 
          * NL80211_CMD_UNPROT_DEAUTHENTICATE event to supplicant at any state 
          * of SME(Linux Kernel) state machine.
          *
          * Reason code WLAN_REASON_DISASSOC_LOW_ACK is currently used to restart
          * the driver.
          *
          */
         
         cfg80211_send_unprot_deauth(pAdapterNode->pAdapter->dev, (u_int8_t*)mgmt, len );  
      }
      status = hdd_get_next_adapter ( pHddCtx, pAdapterNode, &pNext );
      pAdapterNode = pNext;
   } while((NULL != pAdapterNode) && (VOS_STATUS_SUCCESS == status));


   /* Free the allocated management frame */
   kfree(mgmt);

   /* Retry until we unload or reach max count */
   if(++pHddCtx->hdd_restart_retries < WLAN_HDD_RESTART_RETRY_MAX_CNT) 
      vos_timer_start(&pHddCtx->hdd_restart_timer, WLAN_HDD_RESTART_RETRY_DELAY_MS);

   return status;

}
/**---------------------------------------------------------------------------
 *
 *   \brief wlan_hdd_restart_timer_cb
 *
 *   Restart timer callback. An internal function.
 *
 *   \param  - User data:
 *
 *   \return - None
 *             
 * --------------------------------------------------------------------------*/

void wlan_hdd_restart_timer_cb(v_PVOID_t usrDataForCallback)
{
   hdd_context_t *pHddCtx = usrDataForCallback;
   wlan_hdd_framework_restart(pHddCtx);
   return;

}


/**---------------------------------------------------------------------------
 *
 *   \brief wlan_hdd_restart_driver
 *
 *   This function sends an event to supplicant to restart the WLAN driver. 
 *   
 *   This function is called from vos_wlanRestart.
 *
 *   \param  - pHddCtx
 *
 *   \return - VOS_STATUS_SUCCESS: Success
 *             VOS_STATUS_E_EMPTY: Adapter is Empty
 *             VOS_STATUS_E_ALREADY: Request already in progress

 * --------------------------------------------------------------------------*/
VOS_STATUS wlan_hdd_restart_driver(hdd_context_t *pHddCtx) 
{
   VOS_STATUS status = VOS_STATUS_SUCCESS;

   /* A tight check to make sure reentrancy */
   if(atomic_xchg(&pHddCtx->isRestartInProgress, 1))
   {
      VOS_TRACE(VOS_MODULE_ID_HDD, VOS_TRACE_LEVEL_WARN, 
            "%s: WLAN restart is already in progress", __func__);

      return VOS_STATUS_E_ALREADY;
   }

   /* Restart API */
   status = wlan_hdd_framework_restart(pHddCtx);
   
   return status;
}


//Register the module init/exit functions
module_init(hdd_module_init);
module_exit(hdd_module_exit);

MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Qualcomm Atheros, Inc.");
MODULE_DESCRIPTION("WLAN HOST DEVICE DRIVER");

#if defined(WLAN_SOFTAP_FEATURE) || defined(ANI_MANF_DIAG)
module_param(con_mode, int, 0);
#endif