qcacmn: Add QCA vendor commands for spectral scan
Add following vendor commands and their vendor attributes for
spectral scan.
1) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG
Get current values of spectral parameters.
2) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS
Get stats for spectral scan debug.
3) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO
Get the spectral hardware capability.
4) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS
Get the current status of spectral scan.
CRs-Fixed: 2126313
Change-Id: Id1e9b030f85de166696835fadd36d7856a89625d
diff --git a/os_if/linux/qca_vendor.h b/os_if/linux/qca_vendor.h
index a438d88..1323d5f 100644
--- a/os_if/linux/qca_vendor.h
+++ b/os_if/linux/qca_vendor.h
@@ -233,6 +233,18 @@
* information indicating the reason that triggered this detection. The
* attributes for this command are defined in
* enum qca_wlan_vendor_attr_hang.
+ * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG: Get the current values
+ * of spectral parameters used. The spectral scan parameters are specified
+ * by enum qca_wlan_vendor_attr_spectral_scan.
+ * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS: Get the debug stats
+ * for spectral scan functionality. The debug stats are specified by
+ * enum qca_wlan_vendor_attr_spectral_diag_stats.
+ * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO: Get spectral
+ * scan system capabilities. The capabilities are specified
+ * by enum qca_wlan_vendor_attr_spectral_cap.
+ * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS: Get the current
+ * status of spectral scan. The status values are specified
+ * by enum qca_wlan_vendor_attr_spectral_scan_status.
*/
enum qca_nl80211_vendor_subcmds {
@@ -428,6 +440,10 @@
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP = 155,
QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS = 156,
QCA_NL80211_VENDOR_SUBCMD_HANG = 157,
+ QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG = 158,
+ QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS = 159,
+ QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO = 160,
+ QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS = 161,
};
enum qca_wlan_vendor_tos {
@@ -5087,12 +5103,117 @@
* specific scan to be stopped.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE = 19,
-
+ /* Skip interval for FFT reports. u32 attribute */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FFT_PERIOD = 20,
+ /* Set to report only one set of FFT results.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_SHORT_REPORT = 21,
+ /* Debug level for spectral module in driver.
+ * 0 : Verbosity level 0
+ * 1 : Verbosity level 1
+ * 2 : Verbosity level 2
+ * 3 : Matched filterID display
+ * 4 : One time dump of FFT report
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DEBUG_LEVEL = 22,
+ /* Type of spectral scan request. u32 attribute.
+ * It uses values defined in enum
+ * qca_wlan_vendor_attr_spectral_scan_request_type.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE = 23,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_MAX =
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_AFTER_LAST - 1,
};
+/**
+ * enum qca_wlan_vendor_attr_spectral_diag_stats - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS.
+ */
+enum qca_wlan_vendor_attr_spectral_diag_stats {
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_INVALID = 0,
+ /* Number of spectral TLV signature mismatches.
+ * u64 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_SIG_MISMATCH = 1,
+ /* Number of spectral phyerror events with insufficient length when
+ * parsing for secondary 80 search FFT report. u64 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_SEC80_SFFT_INSUFFLEN = 2,
+ /* Number of spectral phyerror events without secondary 80
+ * search FFT report. u64 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_NOSEC80_SFFT = 3,
+ /* Number of spectral phyerror events with vht operation segment 1 id
+ * mismatches in search fft report. u64 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_VHTSEG1ID_MISMATCH = 4,
+ /* Number of spectral phyerror events with vht operation segment 2 id
+ * mismatches in search fft report. u64 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_VHTSEG2ID_MISMATCH = 5,
+
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_MAX =
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_spectral_cap - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO.
+ */
+enum qca_wlan_vendor_attr_spectral_cap {
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_INVALID = 0,
+ /* Flag attribute to indicate phydiag capability */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_PHYDIAG = 1,
+ /* Flag attribute to indicate radar detection capability */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_RADAR = 2,
+ /* Flag attribute to indicate spectral capability */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_SPECTRAL = 3,
+ /* Flag attribute to indicate advanced spectral capability */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_ADVANCED_SPECTRAL = 4,
+
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_MAX =
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_spectral_scan_status - used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS.
+ */
+enum qca_wlan_vendor_attr_spectral_scan_status {
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_INVALID = 0,
+ /* Flag attribute to indicate whether spectral scan is enabled */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_IS_ENABLED = 1,
+ /* Flag attribute to indicate whether spectral scan is in progress*/
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_IS_ACTIVE = 2,
+
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MAX =
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_AFTER_LAST - 1,
+};
+
+/**
+ * qca_wlan_vendor_attr_spectral_scan_request_type: Attribute values for
+ * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE to the vendor subcmd
+ * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START. This represents the
+ * spectral scan request types.
+ * @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN_AND_CONFIG: Request to
+ * set the spectral parameters and start scan.
+ * @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN: Request to
+ * only set the spectral parameters.
+ * @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_CONFIG: Request to
+ * only start the spectral scan.
+ */
+enum qca_wlan_vendor_attr_spectral_scan_request_type {
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN_AND_CONFIG,
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN,
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_CONFIG,
+};
+
#if !(defined (SUPPORT_WDEV_CFG80211_VENDOR_EVENT_ALLOC)) && \
(LINUX_VERSION_CODE < KERNEL_VERSION(4, 1, 0)) && \
!(defined(WITH_BACKPORTS))