qcacmn: Add support for the new NAN EXT vendor command
As part of the NAN Discovery DBS support, new vendor command
- QCA_NL80211_VENDOR_SUBCMD_NAN_EXT - has been defined that
can carry the binary blob encapsulated within an attribute
and can carry additional attributes to enhance the NAN command
interface. Add the related definitions to support this command.
Add definitions to support the new NAN EXT vendor command.
Change-Id: I83c12c7512066434f8974619e1d953ac78d3a40d
CRs-Fixed: 2339032
diff --git a/os_if/linux/qca_vendor.h b/os_if/linux/qca_vendor.h
index 6b43ec3..4346229 100644
--- a/os_if/linux/qca_vendor.h
+++ b/os_if/linux/qca_vendor.h
@@ -43,7 +43,12 @@
* @QCA_NL80211_VENDOR_SUBCMD_ROAMING: Roaming
* @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY: Avoid frequency.
* @QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY: DFS capability
- * @QCA_NL80211_VENDOR_SUBCMD_NAN: Nan
+ * @QCA_NL80211_VENDOR_SUBCMD_NAN: NAN command/event which is used to pass
+ * NAN Request/Response and NAN Indication messages. These messages are
+ * interpreted between the framework and the firmware component. While
+ * sending the command from userspace to the driver, payload is not
+ * encapsulated inside any attribute. Attribute QCA_WLAN_VENDOR_ATTR_NAN
+ * is used when receiving vendor events in userspace from the driver.
* @QCA_NL80211_VENDOR_SUBCMD_STATS_EXT: Ext stats
* @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET: Link layer stats set
* @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET: Link layer stats get
@@ -262,6 +267,13 @@
* @QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION: Sub command to set WiFi
* test configuration. Attributes for this command are defined in
* enum qca_wlan_vendor_attr_wifi_test_config.
+ * @QCA_NL80211_VENDOR_SUBCMD_NAN_EXT: An extendable version of NAN vendor
+ * command. The earlier command for NAN, QCA_NL80211_VENDOR_SUBCMD_NAN,
+ * carried a payload which was a binary blob of data. The command was not
+ * extendable to send more information. The newer version carries the
+ * legacy blob encapsulated within an attribute and can be extended with
+ * additional vendor attributes that can enhance the NAN command
+ * interface.
*
*/
@@ -469,6 +481,7 @@
QCA_NL80211_VENDOR_SUBCMD_SET_QDEPTH_THRESH = 166,
/* Wi-Fi test configuration subcommand */
QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION = 169,
+ QCA_NL80211_VENDOR_SUBCMD_NAN_EXT = 171,
QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT = 174,
};
@@ -809,14 +822,13 @@
* @QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET_INDEX: NUD DEBUG Stats index
* @QCA_NL80211_VENDOR_SUBCMD_HANG_REASON_INDEX: hang event reason index
* @QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO_INDEX: MAC mode info index
+ * @QCA_NL80211_VENDOR_SUBCMD_NAN_EXT_INDEX: NAN Extended index
*/
enum qca_nl80211_vendor_subcmds_index {
QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_INDEX = 0,
-#ifdef WLAN_FEATURE_NAN
QCA_NL80211_VENDOR_SUBCMD_NAN_INDEX,
-#endif /* WLAN_FEATURE_NAN */
#ifdef WLAN_FEATURE_STATS_EXT
QCA_NL80211_VENDOR_SUBCMD_STATS_EXT_INDEX,
@@ -881,9 +893,7 @@
#ifdef WLAN_FEATURE_TSF
QCA_NL80211_VENDOR_SUBCMD_TSF_INDEX,
#endif
-#ifdef WLAN_FEATURE_NAN_DATAPATH
QCA_NL80211_VENDOR_SUBCMD_NDP_INDEX,
-#endif /* WLAN_FEATURE_NAN_DATAPATH */
QCA_NL80211_VENDOR_SUBCMD_P2P_LO_EVENT_INDEX,
QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH_INDEX,
QCA_NL80211_VENDOR_SUBCMD_UPDATE_EXTERNAL_ACS_CONFIG,
@@ -892,6 +902,7 @@
QCA_NL80211_VENDOR_SUBCMD_HANG_REASON_INDEX,
QCA_NL80211_VENDOR_SUBCMD_HTT_STATS_INDEX,
QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_NAN_EXT_INDEX,
QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT_INDEX,
};
@@ -6449,4 +6460,51 @@
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_AFTER_LAST - 1,
};
+/* enum qca_wlan_nan_subcmd_type - Type of NAN command used by attribute
+ * QCA_WLAN_VENDOR_ATTR_NAN_SUBCMD_TYPE as a part of vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT.
+ */
+enum qca_wlan_nan_ext_subcmd_type {
+ /* Subcmd of type NAN Enable Request */
+ QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ = 1,
+ /* Subcmd of type NAN Disable Request */
+ QCA_WLAN_NAN_EXT_SUBCMD_TYPE_DISABLE_REQ = 2,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_nan_params - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT.
+ */
+enum qca_wlan_vendor_attr_nan_params {
+ QCA_WLAN_VENDOR_ATTR_NAN_INVALID = 0,
+ /* Carries NAN command for firmware component. Every vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT must contain this attribute with a
+ * payload containing the NAN command. NLA_BINARY attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_NAN_CMD_DATA = 1,
+ /* Indicates the type of NAN command sent with
+ * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT. enum qca_wlan_nan_ext_subcmd_type
+ * describes the possible range of values. This attribute is mandatory
+ * if the command being issued is either
+ * QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ or
+ * QCA_WLAN_NAN_EXT_SUBCMD_TYPE_DISABLE_REQ. NLA_U32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_NAN_SUBCMD_TYPE = 2,
+ /* Frequency (in MHz) of primary NAN discovery social channel in 2.4 GHz
+ * band. This attribute is mandatory when command type is
+ * QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ. NLA_U32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_NAN_DISC_24GHZ_BAND_FREQ = 3,
+ /* Frequency (in MHz) of secondary NAN discovery social channel in 5 GHz
+ * band. This attribute is optional and should be included when command
+ * type is QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ and NAN discovery
+ * has to be started on 5GHz along with 2.4GHz. NLA_U32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_NAN_DISC_5GHZ_BAND_FREQ = 4,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_MAX =
+ QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_AFTER_LAST - 1
+};
#endif