qcacmn: Define os private structure in pdev object
-Define OS private memory structure and provide pointer
to store the private data of each umac module's os specific data
-Initialize pdev's os private structure member 'wiphy'.
-Move vendor command definition to common project.
Change-Id: I2033bfbf0fe38e82c3a14942ac9f9bfda45e2c6c
CRs-Fixed: 2002991
diff --git a/os_if/linux/qca_vendor.h b/os_if/linux/qca_vendor.h
new file mode 100644
index 0000000..fd533a4
--- /dev/null
+++ b/os_if/linux/qca_vendor.h
@@ -0,0 +1,3352 @@
+/*
+ * Copyright (c) 2012-2017 The Linux Foundation. All rights reserved.
+ *
+ * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
+ *
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file was originally distributed by Qualcomm Atheros, Inc.
+ * under proprietary terms before Copyright ownership was assigned
+ * to the Linux Foundation.
+ */
+
+/**
+ * DOC: declares vendor commands interfacing with linux kernel
+ */
+
+
+#ifndef _WLAN_QCA_VENDOR_H_
+#define _WLAN_QCA_VENDOR_H_
+
+/* Vendor id to be used in vendor specific command and events
+ * to user space.
+ * NOTE: The authoritative place for definition of QCA_NL80211_VENDOR_ID,
+ * vendor subcmd definitions prefixed with QCA_NL80211_VENDOR_SUBCMD, and
+ * qca_wlan_vendor_attr is open source file src/common/qca-vendor.h in
+ * git://w1.fi/srv/git/hostap.git; the values here are just a copy of that
+ */
+
+#define QCA_NL80211_VENDOR_ID 0x001374
+
+/**
+ * enum qca_nl80211_vendor_subcmds: NL 80211 vendor sub command
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_UNSPEC: Unspecified
+ * @QCA_NL80211_VENDOR_SUBCMD_TEST: Test
+ * Sub commands 2 to 8 are not used
+ * @QCA_NL80211_VENDOR_SUBCMD_ROAMING: Roaming
+ * @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY: Avoid frequency.
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY: DFS capability
+ * @QCA_NL80211_VENDOR_SUBCMD_NAN: Nan
+ * @QCA_NL80211_VENDOR_SUBCMD_STATS_EXT: Ext stats
+ * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET: Link layer stats set
+ * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET: Link layer stats get
+ * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR: Link layer stats clear
+ * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_RADIO_RESULTS: Link layer stats radio
+ * results
+ * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_IFACE_RESULTS: Link layer stats interface
+ * results
+ * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_PEERS_RESULTS: Link layer stats peer
+ * results
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_START: Ext scan start
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_STOP: Ext scan stop
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_VALID_CHANNELS: Ext scan get valid
+ * channels
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CAPABILITIES: Ext scan get capability
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CACHED_RESULTS: Ext scan get cached
+ * results
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_RESULTS_AVAILABLE: Ext scan results
+ * available. Used when report_threshold is reached in scan cache.
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_FULL_SCAN_RESULT: Ext scan full scan
+ * result. Used to report scan results when each probe rsp. is received,
+ * if report_events enabled in wifi_scan_cmd_params.
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_EVENT: Ext scan event from target.
+ * Indicates progress of scanning state-machine.
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_FOUND: Ext scan hotlist
+ * ap found
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_BSSID_HOTLIST: Ext scan set hotlist
+ * bssid
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_BSSID_HOTLIST: Ext scan reset
+ * hotlist bssid
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SIGNIFICANT_CHANGE: Ext scan significant
+ * change
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SIGNIFICANT_CHANGE: Ext scan set
+ * significant change
+ * ap found
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SIGNIFICANT_CHANGE: Ext scan reset
+ * significant change
+ * @QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE: Ext tdls enable
+ * @QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE: Ext tdls disable
+ * @QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS: Ext tdls get status
+ * @QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE: Ext tdls state
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES: Get supported features
+ * @QCA_NL80211_VENDOR_SUBCMD_SCANNING_MAC_OUI: Set scanning_mac_oui
+ * @QCA_NL80211_VENDOR_SUBCMD_NO_DFS_FLAG: No DFS flag
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX: Get Concurrency Matrix
+ * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY: Get the key mgmt offload keys
+ * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH: After roaming, send the
+ * roaming and auth information.
+ * @QCA_NL80211_VENDOR_SUBCMD_OCB_SET_SCHED: Set OCB schedule
+ * @QCA_NL80211_VENDOR_SUBCMD_DO_ACS: ACS offload flag
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES: Get the supported features by the
+ * driver.
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED: Indicate that driver
+ * started CAC on DFS channel
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED: Indicate that driver
+ * completed the CAC check on DFS channel
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED: Indicate that the CAC
+ * check was aborted by the driver
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED: Indicate that the
+ * driver completed NOP
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED: Indicate that the
+ * driver detected radar signal on the current operating channel
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO: get wlan driver information
+ * @QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_START: start wifi logger
+ * @QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_MEMORY_DUMP: memory dump request
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET: get logger feature set
+ * @QCA_NL80211_VENDOR_SUBCMD_ROAM: roam
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SSID_HOTLIST: extscan set ssid hotlist
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SSID_HOTLIST:
+ * extscan reset ssid hotlist
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_FOUND: hotlist ssid found
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_LOST: hotlist ssid lost
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_SET_LIST: set pno list
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_SET_PASSPOINT_LIST: set passpoint list
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_RESET_PASSPOINT_LIST:
+ * reset passpoint list
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_NETWORK_FOUND: pno network found
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_PASSPOINT_NETWORK_FOUND:
+ * passpoint network found
+ * @QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION: set wifi config
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION: get wifi config
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET: get logging features
+ * @QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES: get link properties
+ * @QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG: set gateway parameters
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST: get preferred channel
+ list
+ * @QCA_NL80211_VENDOR_SUBCMD_SET_PROBABLE_OPER_CHANNEL: channel hint
+ * @QCA_NL80211_VENDOR_SUBCMD_SETBAND: vendor setband command
+ * @QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN: venodr scan command
+ * @QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE: vendor scan complete
+ * @QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN: vendor abort scan
+ * @QCA_NL80211_VENDOR_SUBCMD_OTA_TEST: enable OTA test
+ * @QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE: set tx power by percentage
+ * @QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE_DECR_DB: reduce tx power by DB
+ * @QCA_NL80211_VENDOR_SUBCMD_SET_SAP_CONFIG: SAP configuration
+ * @QCA_NL80211_VENDOR_SUBCMD_TSF: TSF operations command
+ * @QCA_NL80211_VENDOR_SUBCMD_WISA: WISA mode configuration
+ * @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START: Command used to
+ * start the P2P Listen Offload function in device and pass the listen
+ * channel, period, interval, count, number of device types, device
+ * types and vendor information elements to device driver and firmware.
+ * @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP: Command/event used to
+ * indicate stop request/response of the P2P Listen Offload function in
+ * device. As an event, it indicates either the feature stopped after it
+ * was already running or feature has actually failed to start.
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_STATION: send BSS Information
+ * @QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH: After SAP starts
+ * beaconing, this sub command provides the driver, the frequencies on the
+ * 5 GHz to check for any radar activity. Driver selects one channel from
+ * this priority list provided through
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST and starts
+ * to check for radar activity on it. If no radar activity is detected
+ * during the channel availability check period, driver internally switches
+ * to the selected frequency of operation. If the frequency is zero, driver
+ * internally selects a channel. The status of this conditional switch is
+ * indicated through an event using the same sub command through
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS. Attributes are
+ * listed in qca_wlan_vendor_attr_sap_conditional_chan_switch
+ * @QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS: Configure the TDLS behavior
+ * in the host driver. The different TDLS configurations are defined
+ * by the attributes in enum qca_wlan_vendor_attr_tdls_configuration.
+ * @QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS:Set the Specific Absorption Rate
+ * (SAR) power limits. A critical regulation for FCC compliance, OEMs
+ * require methods to set SAR limits on TX power of WLAN/WWAN.
+ * enum qca_vendor_attr_sar_limits attributes are used with this command.
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS: Vendor command used to get/set
+ * configuration of vendor ACS.
+ */
+
+enum qca_nl80211_vendor_subcmds {
+ QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
+ QCA_NL80211_VENDOR_SUBCMD_TEST = 1,
+ QCA_NL80211_VENDOR_SUBCMD_ROAMING = 9,
+ QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY = 10,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY = 11,
+ QCA_NL80211_VENDOR_SUBCMD_NAN = 12,
+ QCA_NL80211_VENDOR_SUBCMD_STATS_EXT = 13,
+
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET = 14,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET = 15,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR = 16,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_RADIO_RESULTS = 17,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_IFACE_RESULTS = 18,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_PEERS_RESULTS = 19,
+
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_START = 20,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_STOP = 21,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_VALID_CHANNELS = 22,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CAPABILITIES = 23,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CACHED_RESULTS = 24,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_RESULTS_AVAILABLE = 25,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_FULL_SCAN_RESULT = 26,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_EVENT = 27,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_FOUND = 28,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_BSSID_HOTLIST = 29,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_BSSID_HOTLIST = 30,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SIGNIFICANT_CHANGE = 31,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SIGNIFICANT_CHANGE = 32,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SIGNIFICANT_CHANGE = 33,
+
+ QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE = 34,
+ QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE = 35,
+ QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS = 36,
+ QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE = 37,
+
+ QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES = 38,
+
+ QCA_NL80211_VENDOR_SUBCMD_SCANNING_MAC_OUI = 39,
+ QCA_NL80211_VENDOR_SUBCMD_NO_DFS_FLAG = 40,
+
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_LOST = 41,
+
+ /* Get Concurrency Matrix */
+ QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX = 42,
+
+ QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY = 50,
+ QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH = 51,
+
+ /* Deprecated */
+ QCA_NL80211_VENDOR_SUBCMD_OCB_SET_SCHED = 53,
+
+ QCA_NL80211_VENDOR_SUBCMD_DO_ACS = 54,
+
+ QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES = 55,
+
+ /* Off loaded DFS events */
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED = 56,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED = 57,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED = 58,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED = 59,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED = 60,
+
+ QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO = 61,
+ QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_START = 62,
+ QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_MEMORY_DUMP = 63,
+ QCA_NL80211_VENDOR_SUBCMD_ROAM = 64,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SSID_HOTLIST = 65,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SSID_HOTLIST = 66,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_FOUND = 67,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_LOST = 68,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_SET_LIST = 69,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_SET_PASSPOINT_LIST = 70,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_RESET_PASSPOINT_LIST = 71,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_NETWORK_FOUND = 72,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_PASSPOINT_NETWORK_FOUND = 73,
+
+ /* Wi-Fi Configuration subcommands */
+ QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION = 74,
+ QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION = 75,
+ QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET = 76,
+ QCA_NL80211_VENDOR_SUBCMD_GET_RING_DATA = 77,
+
+ QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_CAPABILITIES = 78,
+ QCA_NL80211_VENDOR_SUBCMD_OFFLOADED_PACKETS = 79,
+ QCA_NL80211_VENDOR_SUBCMD_MONITOR_RSSI = 80,
+ QCA_NL80211_VENDOR_SUBCMD_NDP = 81,
+
+ /* NS Offload enable/disable cmd */
+ QCA_NL80211_VENDOR_SUBCMD_ND_OFFLOAD = 82,
+
+ QCA_NL80211_VENDOR_SUBCMD_PACKET_FILTER = 83,
+ QCA_NL80211_VENDOR_SUBCMD_GET_BUS_SIZE = 84,
+
+ QCA_NL80211_VENDOR_SUBCMD_GET_WAKE_REASON_STATS = 85,
+
+ /* OCB commands */
+ QCA_NL80211_VENDOR_SUBCMD_OCB_SET_CONFIG = 92,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_SET_UTC_TIME = 93,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_START_TIMING_ADVERT = 94,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_STOP_TIMING_ADVERT = 95,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_GET_TSF_TIMER = 96,
+ QCA_NL80211_VENDOR_SUBCMD_DCC_GET_STATS = 97,
+ QCA_NL80211_VENDOR_SUBCMD_DCC_CLEAR_STATS = 98,
+ QCA_NL80211_VENDOR_SUBCMD_DCC_UPDATE_NDL = 99,
+ QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT = 100,
+
+ /* subcommand to get link properties */
+ QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES = 101,
+ /* LFR Subnet Detection */
+ QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG = 102,
+
+ /* DBS subcommands */
+ QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST = 103,
+ QCA_NL80211_VENDOR_SUBCMD_SET_PROBABLE_OPER_CHANNEL = 104,
+
+ /* Vendor setband command */
+ QCA_NL80211_VENDOR_SUBCMD_SETBAND = 105,
+
+ /* Vendor scan commands */
+ QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN = 106,
+ QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE = 107,
+
+ /* OTA test subcommand */
+ QCA_NL80211_VENDOR_SUBCMD_OTA_TEST = 108,
+ /* Tx power scaling subcommands */
+ QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE = 109,
+ /* Tx power scaling in db subcommands */
+ QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE_DECR_DB = 115,
+ QCA_NL80211_VENDOR_SUBCMD_ACS_POLICY = 116,
+ QCA_NL80211_VENDOR_SUBCMD_STA_CONNECT_ROAM_POLICY = 117,
+ QCA_NL80211_VENDOR_SUBCMD_SET_SAP_CONFIG = 118,
+ QCA_NL80211_VENDOR_SUBCMD_TSF = 119,
+ QCA_NL80211_VENDOR_SUBCMD_WISA = 120,
+ QCA_NL80211_VENDOR_SUBCMD_GET_STATION = 121,
+ QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START = 122,
+ QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP = 123,
+ QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH = 124,
+
+ /* Encrypt/Decrypt command */
+ QCA_NL80211_VENDOR_SUBCMD_ENCRYPTION_TEST = 137,
+
+ /* Configure the TDLS mode from user space */
+ QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS = 143,
+
+ /* Vendor abort scan command */
+ QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN = 145,
+
+ /* Set Specific Absorption Rate(SAR) Power Limits */
+ QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS = 146,
+
+ /* External Auto channel configuration setting */
+ QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS = 147,
+
+ /* Set the trace level for QDF */
+ QCA_NL80211_VENDOR_SUBCMD_SET_TRACE_LEVEL = 152,
+};
+
+/**
+ * enum qca_vendor_attr_set_trace_level - Config params for QDF set trace level
+ * @QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_INVALID: Invalid trace level
+ * @QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_PARAM : Trace level parameters
+ * @QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_MODULE_ID : Module of which trace
+ level needs to be updated.
+ * @QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_TRACE_MASK : verbose mask, which need
+ * to be set.
+ * @QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_AFTER_LAST : after last.
+ * @QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_MAX : Max attribute.
+ */
+enum qca_vendor_attr_set_trace_level {
+ QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_INVALID = 0,
+ /*
+ * Array of QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_PARAM
+ * attributes.
+ */
+ QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_PARAM = 1,
+ QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_MODULE_ID = 2,
+ QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_TRACE_MASK = 3,
+ QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_MAX =
+ QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_get_station - Sub commands used by
+ * QCA_NL80211_VENDOR_SUBCMD_GET_STATION to get the corresponding
+ * station information. The information obtained through these
+ * commands signify the current info in connected state and
+ * latest cached information during the connected state , if queried
+ * when in disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INVALID: Invalid attribute
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO: bss info
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_ASSOC_FAIL_REASON: assoc fail reason
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_AFTER_LAST: After last
+ */
+enum qca_wlan_vendor_attr_get_station {
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_ASSOC_FAIL_REASON,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_MAX =
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_802_11_mode - dot11 mode
+ * @QCA_WLAN_802_11_MODE_INVALID: Invalid dot11 mode
+ * @QCA_WLAN_802_11_MODE_11A: mode A
+ * @QCA_WLAN_802_11_MODE_11B: mode B
+ * @QCA_WLAN_802_11_MODE_11G: mode G
+ * @QCA_WLAN_802_11_MODE_11N: mode N
+ * @QCA_WLAN_802_11_MODE_11AC: mode AC
+ */
+enum qca_wlan_802_11_mode {
+ QCA_WLAN_802_11_MODE_INVALID,
+ QCA_WLAN_802_11_MODE_11A,
+ QCA_WLAN_802_11_MODE_11B,
+ QCA_WLAN_802_11_MODE_11G,
+ QCA_WLAN_802_11_MODE_11N,
+ QCA_WLAN_802_11_MODE_11AC,
+};
+
+/**
+ * enum qca_wlan_auth_type - Authentication key management type
+ * @QCA_WLAN_AUTH_TYPE_INVALID: Invalid key management type
+ * @QCA_WLAN_AUTH_TYPE_OPEN: Open key
+ * @QCA_WLAN_AUTH_TYPE_SHARED: shared key
+ * @QCA_WLAN_AUTH_TYPE_WPA: wpa key
+ * @QCA_WLAN_AUTH_TYPE_WPA_PSK: wpa psk key
+ * @QCA_WLAN_AUTH_TYPE_WPA_NONE: wpa none key
+ * @QCA_WLAN_AUTH_TYPE_RSN: rsn key
+ * @QCA_WLAN_AUTH_TYPE_RSN_PSK: rsn psk key
+ * @QCA_WLAN_AUTH_TYPE_FT: ft key
+ * @QCA_WLAN_AUTH_TYPE_FT_PSK: ft psk key
+ * @QCA_WLAN_AUTH_TYPE_SHA256: shared 256 key
+ * @QCA_WLAN_AUTH_TYPE_SHA256_PSK: shared 256 psk
+ * @QCA_WLAN_AUTH_TYPE_WAI: wai key
+ * @QCA_WLAN_AUTH_TYPE_WAI_PSK wai psk key
+ * @QCA_WLAN_AUTH_TYPE_CCKM_WPA: cckm wpa key
+ * @QCA_WLAN_AUTH_TYPE_CCKM_RSN: cckm rsn key
+ */
+enum qca_wlan_auth_type {
+ QCA_WLAN_AUTH_TYPE_INVALID,
+ QCA_WLAN_AUTH_TYPE_OPEN,
+ QCA_WLAN_AUTH_TYPE_SHARED,
+ QCA_WLAN_AUTH_TYPE_WPA,
+ QCA_WLAN_AUTH_TYPE_WPA_PSK,
+ QCA_WLAN_AUTH_TYPE_WPA_NONE,
+ QCA_WLAN_AUTH_TYPE_RSN,
+ QCA_WLAN_AUTH_TYPE_RSN_PSK,
+ QCA_WLAN_AUTH_TYPE_FT,
+ QCA_WLAN_AUTH_TYPE_FT_PSK,
+ QCA_WLAN_AUTH_TYPE_SHA256,
+ QCA_WLAN_AUTH_TYPE_SHA256_PSK,
+ QCA_WLAN_AUTH_TYPE_WAI,
+ QCA_WLAN_AUTH_TYPE_WAI_PSK,
+ QCA_WLAN_AUTH_TYPE_CCKM_WPA,
+ QCA_WLAN_AUTH_TYPE_CCKM_RSN,
+ QCA_WLAN_AUTH_TYPE_AUTOSWITCH,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_get_station_info - Station Info queried
+ * through QCA_NL80211_VENDOR_SUBCMD_GET_STATION.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_INVALID: Invalid Attribute
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_LINK_STANDARD_NL80211_ATTR:
+ * Get the standard NL attributes Nested with this attribute.
+ * Ex : Query BW , BITRATE32 , NSS , Signal , Noise of the Link -
+ * NL80211_ATTR_SSID / NL80211_ATTR_SURVEY_INFO (Connected Channel) /
+ * NL80211_ATTR_STA_INFO
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AP_STANDARD_NL80211_ATTR:
+ * Get the standard NL attributes Nested with this attribute.
+ * Ex : Query HT/VHT Capability advertized by the AP.
+ * NL80211_ATTR_VHT_CAPABILITY / NL80211_ATTR_HT_CAPABILITY
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_ROAM_COUNT:
+ * Number of successful Roam attempts before a
+ * disconnect, Unsigned 32 bit value
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AKM:
+ * Authentication Key Management Type used for the connected session.
+ * Signified by enum qca_wlan_auth_type
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_802_11_MODE: 802.11 Mode of the
+ * connected Session, signified by enum qca_wlan_802_11_mode
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AP_HS20_INDICATION:
+ * HS20 Indication Element
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_ASSOC_FAIL_REASON:
+ * Status Code Corresponding to the Association Failure.
+ * Unsigned 32 bit value.
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AFTER_LAST: After last
+ */
+enum qca_wlan_vendor_attr_get_station_info {
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_LINK_STANDARD_NL80211_ATTR,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AP_STANDARD_NL80211_ATTR,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_ROAM_COUNT,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AKM,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_802_11_MODE,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AP_HS20_INDICATION,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_HT_OPERATION,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_VHT_OPERATION,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_ASSOC_FAIL_REASON,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_MAX =
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AFTER_LAST - 1,
+};
+
+/* define short names for get station info attributes */
+#define LINK_INFO_STANDARD_NL80211_ATTR \
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_LINK_STANDARD_NL80211_ATTR
+#define AP_INFO_STANDARD_NL80211_ATTR \
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AP_STANDARD_NL80211_ATTR
+#define INFO_ROAM_COUNT \
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_ROAM_COUNT
+#define INFO_AKM \
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AKM
+#define WLAN802_11_MODE \
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_802_11_MODE
+#define AP_INFO_HS20_INDICATION \
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AP_HS20_INDICATION
+#define HT_OPERATION \
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_HT_OPERATION
+#define VHT_OPERATION \
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_VHT_OPERATION
+#define INFO_ASSOC_FAIL_REASON \
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_ASSOC_FAIL_REASON
+
+/**
+ * enum qca_nl80211_vendor_subcmds_index - vendor sub commands index
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_INDEX: Avoid frequency
+ * @QCA_NL80211_VENDOR_SUBCMD_NAN_INDEX: Nan
+ * @QCA_NL80211_VENDOR_SUBCMD_STATS_EXT_INDEX: Ext stats
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_START_INDEX: Ext scan start
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_STOP_INDEX: Ext scan stop
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CAPABILITIES_INDEX: Ext scan get
+ * capability
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CACHED_RESULTS_INDEX: Ext scan get
+ * cached results
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_RESULTS_AVAILABLE_INDEX: Ext scan
+ * results available
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_FULL_SCAN_RESULT_INDEX: Ext scan full
+ * scan result
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_EVENT_INDEX: Ext scan event
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_FOUND_INDEX: Ext scan hot list
+ * AP found
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_BSSID_HOTLIST_INDEX: Ext scan set
+ * bssid hotlist
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_BSSID_HOTLIST_INDEX: Ext scan reset
+ * bssid hotlist
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SIGNIFICANT_CHANGE_INDEX: Ext scan
+ * significant change
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SIGNIFICANT_CHANGE_INDEX: Ext scan
+ * set significant change
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SIGNIFICANT_CHANGE_INDEX: Ext scan
+ * reset significant change
+ * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET_INDEX: Set stats
+ * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET_INDEX: Get stats
+ * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR_INDEX: Clear stats
+ * @QCA_NL80211_VENDOR_SUBCMD_LL_RADIO_STATS_INDEX: Radio stats
+ * @QCA_NL80211_VENDOR_SUBCMD_LL_IFACE_STATS_INDEX: Iface stats
+ * @QCA_NL80211_VENDOR_SUBCMD_LL_PEER_INFO_STATS_INDEX: Peer info stats
+ * @QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE_CHANGE_INDEX: Ext tdls state change
+ * @QCA_NL80211_VENDOR_SUBCMD_DO_ACS_INDEX: ACS command
+ * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH_INDEX: Pass Roam and Auth info
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_LOST_INDEX: hotlist ap lost
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_NETWORK_FOUND_INDEX:
+ * pno network found index
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_PASSPOINT_NETWORK_FOUND_INDEX:
+ * passpoint match found index
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SSID_HOTLIST_INDEX:
+ * set ssid hotlist index
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SSID_HOTLIST_INDEX:
+ * reset ssid hotlist index
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_FOUND_INDEX:
+ * hotlist ssid found index
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_LOST_INDEX:
+ * hotlist ssid lost index
+ * @QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT_INDEX
+ * dcc stats event index
+ * @QCA_NL80211_VENDOR_SUBCMD_SCAN_INDEX: vendor scan index
+ * @QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE_INDEX:
+ * vendor scan complete event index
+ * @QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG_INDEX:
+ * update gateway parameters index
+ * @QCA_NL80211_VENDOR_SUBCMD_TSF_INDEX: TSF response events index
+ * @QCA_NL80211_VENDOR_SUBCMD_P2P_LO_EVENT_INDEX:
+ * P2P listen offload index
+ * @QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH_INDEX: SAP
+ * conditional channel switch index
+ */
+
+enum qca_nl80211_vendor_subcmds_index {
+#if defined(FEATURE_WLAN_CH_AVOID) || defined(FEATURE_WLAN_FORCE_SAP_SCC)
+ QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_INDEX = 0,
+#endif /* FEATURE_WLAN_CH_AVOID || FEATURE_WLAN_FORCE_SAP_SCC */
+
+#ifdef WLAN_FEATURE_NAN
+ QCA_NL80211_VENDOR_SUBCMD_NAN_INDEX,
+#endif /* WLAN_FEATURE_NAN */
+
+#ifdef WLAN_FEATURE_STATS_EXT
+ QCA_NL80211_VENDOR_SUBCMD_STATS_EXT_INDEX,
+#endif /* WLAN_FEATURE_STATS_EXT */
+
+#ifdef FEATURE_WLAN_EXTSCAN
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_START_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_STOP_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CAPABILITIES_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CACHED_RESULTS_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_RESULTS_AVAILABLE_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_FULL_SCAN_RESULT_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_EVENT_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_FOUND_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_BSSID_HOTLIST_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_BSSID_HOTLIST_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SIGNIFICANT_CHANGE_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SIGNIFICANT_CHANGE_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SIGNIFICANT_CHANGE_INDEX,
+#endif /* FEATURE_WLAN_EXTSCAN */
+
+#ifdef WLAN_FEATURE_LINK_LAYER_STATS
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_LL_RADIO_STATS_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_LL_IFACE_STATS_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_LL_PEER_INFO_STATS_INDEX,
+#endif /* WLAN_FEATURE_LINK_LAYER_STATS */
+
+ QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE_CHANGE_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_DO_ACS_INDEX,
+#ifdef WLAN_FEATURE_ROAM_OFFLOAD
+ QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH_INDEX,
+#endif
+ /* DFS */
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED_INDEX,
+#ifdef FEATURE_WLAN_EXTSCAN
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_LOST_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_NETWORK_FOUND_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_PASSPOINT_NETWORK_FOUND_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SSID_HOTLIST_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SSID_HOTLIST_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_FOUND_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_LOST_INDEX,
+#endif /* FEATURE_WLAN_EXTSCAN */
+ QCA_NL80211_VENDOR_SUBCMD_MONITOR_RSSI_INDEX,
+#ifdef WLAN_FEATURE_MEMDUMP
+ QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_MEMORY_DUMP_INDEX,
+#endif /* WLAN_FEATURE_MEMDUMP */
+ /* OCB events */
+ QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_SCAN_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG_INDEX,
+#ifdef WLAN_FEATURE_TSF
+ QCA_NL80211_VENDOR_SUBCMD_TSF_INDEX,
+#endif
+#ifdef WLAN_FEATURE_NAN_DATAPATH
+ QCA_NL80211_VENDOR_SUBCMD_NDP_INDEX,
+#endif /* WLAN_FEATURE_NAN_DATAPATH */
+ QCA_NL80211_VENDOR_SUBCMD_P2P_LO_EVENT_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH_INDEX,
+ QCA_NL80211_VENDOR_SUBCMD_UPDATE_EXTERNAL_ACS_CONFIG,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_tdls_enable - TDLS enable attribute
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_INVALID: Invalid initial value
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAC_ADDR: An array of 6 x Unsigned 8-bit
+ * value
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_CHANNEL: Signed 32-bit value, but lets
+ * keep as unsigned for now
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_GLOBAL_OPERATING_CLASS: operating class
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAX_LATENCY_MS: Enable max latency in ms
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MIN_BANDWIDTH_KBPS: Enable min bandwidth
+ * in KBPS
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAX: Max value
+ */
+enum qca_wlan_vendor_attr_tdls_enable {
+ QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAC_ADDR,
+ QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_CHANNEL,
+ QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_GLOBAL_OPERATING_CLASS,
+ QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAX_LATENCY_MS,
+ QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MIN_BANDWIDTH_KBPS,
+ QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAX =
+ QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_tdls_disable: tdls disable attribute
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_INVALID: Invalid initial value
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_MAC_ADDR: An array of 6 x Unsigned
+ * 8-bit value
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_MAX: Max value
+ */
+enum qca_wlan_vendor_attr_tdls_disable {
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_MAC_ADDR,
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_MAX =
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_tdls_get_status - tdls get status attribute
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_INVALID: Invalid initial value
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAC_ADDR: An array of 6 x Unsigned
+ * 8-bit value
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_STATE: get status state,
+ * unsigned 32-bit value
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_REASON: get status reason
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_CHANNEL: get status channel,
+ * unsigned 32-bit value
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_GLOBAL_OPERATING_CLASS: get operating
+ * class, unsigned 32-bit value
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAX: Max value
+ */
+enum qca_wlan_vendor_attr_tdls_get_status {
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAC_ADDR,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_STATE,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_REASON,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_CHANNEL,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_GLOBAL_OPERATING_CLASS,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAX =
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_tdls_state - tdls state attribute
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_INVALID: Initial invalid value
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_MAC_ADDR: An array of 6 x Unsigned
+ * 8-bit value
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_NEW_STATE: TDLS new state,
+ * unsigned 32-bit value
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_REASON: TDLS state reason
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_CHANNEL: TDLS state channel,
+ * unsigned 32-bit value
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_GLOBAL_OPERATING_CLASS: TDLS state
+ * operating class, unsigned 32-bit value
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_MAX: Max value
+ */
+enum qca_wlan_vendor_attr_tdls_state {
+ QCA_WLAN_VENDOR_ATTR_TDLS_STATE_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TDLS_STATE_MAC_ADDR,
+ QCA_WLAN_VENDOR_ATTR_TDLS_NEW_STATE,
+ QCA_WLAN_VENDOR_ATTR_TDLS_STATE_REASON,
+ QCA_WLAN_VENDOR_ATTR_TDLS_STATE_CHANNEL,
+ QCA_WLAN_VENDOR_ATTR_TDLS_STATE_GLOBAL_OPERATING_CLASS,
+ QCA_WLAN_VENDOR_ATTR_TDLS_STATE_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TDLS_STATE_MAX =
+ QCA_WLAN_VENDOR_ATTR_TDLS_STATE_AFTER_LAST - 1,
+};
+
+/* enum's to provide TDLS capabilites */
+enum qca_wlan_vendor_attr_get_tdls_capabilities {
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_MAX_CONC_SESSIONS = 1,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_FEATURES_SUPPORTED = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_MAX =
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr - wlan vendor attribute
+ *
+ * @QCA_WLAN_VENDOR_ATTR_INVALID: Initial invalid value
+ * @QCA_WLAN_VENDOR_ATTR_DFS: DFS attribute which is used by
+ * QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY
+ * @QCA_WLAN_VENDOR_ATTR_NAN: NAN attribute which is used by
+ * QCA_NL80211_VENDOR_SUBCMD_NAN
+ * @QCA_WLAN_VENDOR_ATTR_STATS_EXT: Ext stats attribute which is used by
+ * QCA_NL80211_VENDOR_SUBCMD_STATS_EXT
+ * @QCA_WLAN_VENDOR_ATTR_IFINDEX: After IFINDEX
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY: Roaming policy which is used by
+ * QCA_NL80211_VENDOR_SUBCMD_ROAMING
+ * @QCA_WLAN_VENDOR_ATTR_MAC_ADDR: MAC Address attribute which is used by
+ * QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES
+ * @QCA_WLAN_VENDOR_ATTR_FEATURE_FLAGS: Supported Features
+ *@QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE: setband attribute which is used by
+ * QCA_NL80211_VENDOR_SUBCMD_SETBAND
+ * @QCA_WLAN_VENDOR_ATTR_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_MAX: Max value
+ */
+enum qca_wlan_vendor_attr {
+ QCA_WLAN_VENDOR_ATTR_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_DFS = 1,
+ QCA_WLAN_VENDOR_ATTR_NAN = 2,
+ QCA_WLAN_VENDOR_ATTR_STATS_EXT = 3,
+ QCA_WLAN_VENDOR_ATTR_IFINDEX = 4,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY = 5,
+ QCA_WLAN_VENDOR_ATTR_MAC_ADDR = 6,
+ QCA_WLAN_VENDOR_ATTR_FEATURE_FLAGS = 7,
+ QCA_WLAN_VENDOR_ATTR_CONCURRENCY_CAPA = 9,
+ QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_2_4_BAND = 10,
+ QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_5_0_BAND = 11,
+ QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE = 12,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_MAX = QCA_WLAN_VENDOR_ATTR_AFTER_LAST - 1
+};
+
+#ifdef FEATURE_WLAN_EXTSCAN
+/**
+ * enum qca_wlan_vendor_attr_extscan_config_params - ext scan config params
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_INVALID: Invalid initial
+ * value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_REQUEST_ID:
+ * Unsigned 32-bit value; Middleware provides it to the driver. Middle ware
+ * either gets it from caller, e.g., framework, or generates one if
+ * framework doesn't provide it.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_GET_VALID_CHANNELS_CONFIG_PARAM_WIFI_BAND:
+ * NL attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_VALID_CHANNELS sub command.
+ * It is unsigned 32-bit value.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_GET_VALID_CHANNELS_CONFIG_PARAM_MAX_CHANNELS:
+ * Unsigned 32-bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_CHANNEL:
+ * NL attributes for input params used by
+ * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_START sub command. Unsigned 32-bit
+ * value; channel frequency
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_DWELL_TIME: Unsigned 32-bit value;
+ * dwell time in ms
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_PASSIVE: Unsigned 8-bit value:
+ * 0: active; 1: passive; N/A for DFS
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_CLASS: Unsigned 8-bit value
+ * channel class
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_INDEX: Unsigned 8-bit value
+ * bucket index, 0 based
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_BAND: Unsigned 8-bit value; band
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_PERIOD: Unsigned 32-bit value;
+ * desired period, in ms
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_REPORT_EVENTS: Unsigned 8-bit
+ * value; report events semantics
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS: Unsigned 32-bit
+ * value. Followed by a nested array of EXTSCAN_CHANNEL_SPEC_* attributes.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC:
+ * Array of QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_* attributes.
+ * Array size: QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_BASE_PERIOD: Unsigned 32-bit
+ * value; base timer period in ms
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_MAX_AP_PER_SCAN: Unsigned
+ * 32-bit value; number of APs to store in each scan in the
+ * BSSID/RSSI history buffer (keep the highest RSSI APs)
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_REPORT_THRESHOLD_PERCENT:
+ * Unsigned 8-bit value; in %, when scan buffer is this much full,
+ * wake up APPS.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_NUM_BUCKETS: Unsigned 8-bit
+ * value; number of scan bucket specs; followed by a nested array
+ * of_EXTSCAN_BUCKET_SPEC_* attributes and values. The size of the array
+ * is determined by NUM_BUCKETS
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC: Array of
+ * QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_* attributes. Array size:
+ * QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_NUM_BUCKETS
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_GET_CACHED_SCAN_RESULTS_CONFIG_PARAM_FLUSH:
+ * Unsigned 8-bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_GET_CACHED_SCAN_RESULTS_CONFIG_PARAM_MAX:
+ * Unsigned 32-bit value; maximum number of results to be returned
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_BSSID: An array of
+ * 6 x Unsigned 8-bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_RSSI_LOW: Signed 32-bit
+ * value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_RSSI_HIGH: Signed 32-bit
+ * value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_CHANNEL: Signed 32-bit
+ * value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_BSSID_HOTLIST_PARAMS_NUM_AP: Number of hotlist
+ * APs as unsigned 32-bit value, followed by a nested array of
+ * AP_THRESHOLD_PARAM attributes and values. The size of the array is
+ * determined by NUM_AP.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM: Array of
+ * QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_* attributes.
+ * Array size: QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SIGNIFICANT_CHANGE_PARAMS_RSSI_SAMPLE_SIZE:
+ * Unsigned 32bit value; number of samples for averaging RSSI
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SIGNIFICANT_CHANGE_PARAMS_LOST_AP_SAMPLE_SIZE:
+ * Unsigned 32bit value; number of samples to confirm AP loss
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SIGNIFICANT_CHANGE_PARAMS_MIN_BREACHING:
+ * Unsigned 32bit value; number of APs breaching threshold.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SIGNIFICANT_CHANGE_PARAMS_NUM_AP:
+ * Unsigned 32bit value; number of APs. Followed by an array of
+ * AP_THRESHOLD_PARAM attributes. Size of the array is NUM_AP.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_BSSID_HOTLIST_PARAMS_LOST_AP_SAMPLE_SIZE:
+ * Unsigned 32bit value; number of samples to confirm AP loss.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_MAX_PERIOD:
+ * Unsigned 32-bit value. If max_period is non zero or different than
+ * period, then this bucket is an exponential backoff bucket.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_BASE:
+ * Unsigned 32-bit value. For exponential back off bucket,
+ * number of scans to performed for a given period.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_STEP_COUNT:
+ * Unsigned 8-bit value; in number of scans, wake up AP after these
+ * many scans.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_REPORT_THRESHOLD_NUM_SCANS:
+ * Unsigned 8-bit value; in number of scans, wake up AP after these
+ * many scans.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_HOTLIST_PARAMS_LOST_SSID_SAMPLE_SIZE:
+ * Unsigned 32bit value; number of samples to confirm SSID loss
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_HOTLIST_PARAMS_NUM_SSID:
+ * Number of hotlist SSIDs as unsigned 32-bit value, followed by a nested
+ * array of SSID_THRESHOLD_PARAM_* attributes and values. The size of the
+ * array is determined by NUM_SSID
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM:
+ * Array of QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_* attributes
+ * Array size: QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_HOTLIST_PARAMS_NUM_SSID
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_SSID:
+ * An array of 33 x Unsigned 8-bit value; NULL terminated SSID
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_BAND:
+ * Signed 32-bit value; band
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_RSSI_LOW:
+ * Signed 32-bit value; low rssi
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_RSSI_HIGH:
+ * Signed 32-bit value; high rssi
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_CONFIGURATION_FLAGS:
+ * Unsigned 32-bit value; a bitmask w/additional extscan config flag.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_MAX: Max value
+ */
+enum qca_wlan_vendor_attr_extscan_config_params {
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_INVALID = 0,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_REQUEST_ID,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_GET_VALID_CHANNELS_CONFIG_PARAM_WIFI_BAND,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_GET_VALID_CHANNELS_CONFIG_PARAM_MAX_CHANNELS,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_CHANNEL,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_DWELL_TIME,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_PASSIVE,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_CLASS,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_INDEX,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_BAND,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_PERIOD,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_REPORT_EVENTS,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_BASE_PERIOD,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_MAX_AP_PER_SCAN,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_REPORT_THRESHOLD_PERCENT,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_NUM_BUCKETS,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_GET_CACHED_SCAN_RESULTS_CONFIG_PARAM_FLUSH,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_GET_CACHED_SCAN_RESULTS_CONFIG_PARAM_MAX,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_BSSID,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_RSSI_LOW,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_RSSI_HIGH,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_CHANNEL,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_BSSID_HOTLIST_PARAMS_NUM_AP,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SIGNIFICANT_CHANGE_PARAMS_RSSI_SAMPLE_SIZE,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SIGNIFICANT_CHANGE_PARAMS_LOST_AP_SAMPLE_SIZE,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SIGNIFICANT_CHANGE_PARAMS_MIN_BREACHING,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SIGNIFICANT_CHANGE_PARAMS_NUM_AP,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_BSSID_HOTLIST_PARAMS_LOST_AP_SAMPLE_SIZE,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_MAX_PERIOD,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_BASE,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_STEP_COUNT,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_REPORT_THRESHOLD_NUM_SCANS,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_HOTLIST_PARAMS_LOST_SSID_SAMPLE_SIZE,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_HOTLIST_PARAMS_NUM_SSID,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_SSID,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_BAND,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_RSSI_LOW,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_RSSI_HIGH,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_CONFIGURATION_FLAGS,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_MAX =
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_extscan_results - vendor attribute ext scan results
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_INVALID: Invalid initial value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_REQUEST_ID: Unsigned 32-bit value
+ * must match the request Id supplied by Wi-Fi HAL in the corresponding
+ * subcmd NL msg
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_STATUS: Unsigned 32-bit value used to
+ * indicate the status response from firmware/driver for the vendor
+ * sub-command
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_NUM_CHANNELS: EXTSCAN Valid Channels
+ * attributes. Unsigned 32bit value followed by a nested array of CHANNELS
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CHANNELS: An array of NUM_CHANNELS x
+ * Unsigned 32bit value integers representing channel numbers.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_SCAN_CACHE_SIZE:
+ * Unsigned 32bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_SCAN_BUCKETS:
+ * Unsigned 32bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_AP_CACHE_PER_SCAN:
+ * Unsigned 32bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_RSSI_SAMPLE_SIZE:
+ * Unsigned 32bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_SCAN_REPORTING_THRESHOLD:
+ * Unsigned 32bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_HOTLIST_APS:
+ * Unsigned 32bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_SIGNIFICANT_WIFI_CHANGE_APS:
+ * Unsigned 32bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_BSSID_HISTORY_ENTRIES:
+ * Unsigned 32bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_NUM_RESULTS_AVAILABLE: Unsigned 32-bit
+ * value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_LIST: An array of
+ * NUM_RESULTS_AVAILABLE x QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_*
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_TIME_STAMP: Unsigned
+ * 64-bit value age of sample at the time of retrieval
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_SSID: 33 x unsigned 8-bit
+ * value; NULL terminated SSID
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_BSSID: An array of 6 x
+ * Unsigned 8-bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_CHANNEL: Unsigned 32-bit
+ * value; channel frequency in MHz
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_RSSI: Signed 32-bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_RTT: Unsigned 32-bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_RTT_SD: Unsigned 32-bit
+ * value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_BEACON_PERIOD:
+ * Unsigned 16-bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_CAPABILITY:
+ * Unsigned 16-bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_IE_LENGTH:
+ * Unsigned 32-bit value; size of the IE DATA blob
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_IE_DATA:
+ * An array of IE_LENGTH x Unsigned 8-bit value; blob of all the
+ * information elements found in the beacon; this data should be
+ * a packed list of wifi_information_element objects, one after
+ * the other.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_MORE_DATA:
+ * Unsigned 8-bit value; set by driver to indicate more scan results are
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_EVENT_TYPE: Unsigned 8-bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_EVENT_STATUS: Unsigned 32-bit
+ * value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_BSSID:
+ * An array of 6 x Unsigned 8-bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_CHANNEL:
+ * Unsigned 32-bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_NUM_RSSI:
+ * Unsigned 32-bit value
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_RSSI_LIST:
+ * A nested array of signed 32-bit RSSI values. Size of the array is
+ * determined by (NUM_RSSI of SIGNIFICANT_CHANGE_RESULT_NUM_RSSI.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_CACHED_RESULTS_LIST:
+ * An array of NUM_RESULTS_AVAILABLE x
+ * QCA_NL80211_VENDOR_ATTR_EXTSCAN_CACHED_RESULTS_*
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_CACHED_RESULTS_SCAN_ID:
+ * Unsigned 32-bit value; a unique identifier for the scan unit
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_CACHED_RESULTS_FLAGS:
+ * Unsigned 32-bit value; a bitmask w/additional information about scan
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_NETWORK_FOUND_NUM_MATCHES:
+ * Unsigned 32-bit value; number of found network matches
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_RESULT_LIST:
+ * A nested array of
+ * QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_*
+ * attributes. Array size =
+ * *_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_NETWORK_FOUND_NUM_MATCHES.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_ID:
+ * Unsigned 32-bit value; network block id for the matched network
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_ANQP_LEN:
+ * Unsigned 32-bit value; ANQP length
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_ANQP:
+ * An array size of PASSPOINT_MATCH_ANQP_LEN of unsigned 8-bit values;
+ * ANQP data in the information_element format.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_HOTLIST_SSIDS:
+ * Unsigned 32bit value; Max hotlist ssids.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_NUM_EPNO_NETS:
+ * Unsigned 32bit value; Max number of epno networks
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_NUM_EPNO_NETS_BY_SSID:
+ * Unsigned 32bit value; Max number of epno networks by ssid
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_NUM_WHITELISTED_SSID:
+ * Unsigned 32bit value; Max number of whitelisted ssids
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_BUCKETS_SCANNED:
+ * Unsigned 32bit value, Bit mask of all buckets scanned in the
+ * current EXTSCAN CYCLE. For e.g. If fw scan is going to scan
+ * following buckets 0, 1, 2 in current cycle then it will be (0x111)
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_MAX_NUM_BLACKLISTED_BSSID:
+ * Unsigned 32bit value; a EXTSCAN Capabilities attribute to send
+ * maximum umber of blacklist bssid's that firmware can support.
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_MAX: Max value
+ */
+enum qca_wlan_vendor_attr_extscan_results {
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_INVALID = 0,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_REQUEST_ID,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_STATUS,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_NUM_CHANNELS,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CHANNELS,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_SCAN_CACHE_SIZE,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_SCAN_BUCKETS,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_AP_CACHE_PER_SCAN,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_RSSI_SAMPLE_SIZE,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_SCAN_REPORTING_THRESHOLD,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_HOTLIST_BSSIDS,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_SIGNIFICANT_WIFI_CHANGE_APS,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_BSSID_HISTORY_ENTRIES,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_NUM_RESULTS_AVAILABLE,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_LIST,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_TIME_STAMP,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_SSID,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_BSSID,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_CHANNEL,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_RSSI,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_RTT,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_RTT_SD,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_BEACON_PERIOD,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_CAPABILITY,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_IE_LENGTH,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_IE_DATA,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_MORE_DATA,
+
+ /* Use attr QCA_WLAN_VENDOR_ATTR_EXTSCAN_NUM_RESULTS_AVAILABLE
+ * to indicate number of wifi scan results/bssids retrieved by the scan.
+ * Also, use QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_LIST to indicate the
+ * list of wifi scan results returned for each cached result block.
+ */
+
+ /* EXTSCAN attributes for
+ * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_EVENT sub-command.
+ */
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_EVENT_TYPE,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_EVENT_STATUS,
+
+ /* EXTSCAN attributes for
+ * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_FOUND sub-command.
+ */
+ /* Use attr QCA_WLAN_VENDOR_ATTR_EXTSCAN_NUM_RESULTS_AVAILABLE
+ * to indicate number of results.
+ */
+
+ /* EXTSCAN attributes for
+ * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SIGNIFICANT_CHANGE sub-command.
+ */
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_BSSID,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_CHANNEL,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_NUM_RSSI,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_RSSI_LIST,
+
+ /* EXTSCAN attributes used with
+ * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CACHED_RESULTS sub-command.
+ */
+ /* Use attr QCA_WLAN_VENDOR_ATTR_EXTSCAN_NUM_RESULTS_AVAILABLE
+ * to indicate number of gscan cached results returned.
+ * Also, use QCA_WLAN_VENDOR_ATTR_EXTSCAN_CACHED_RESULTS_LIST to
+ * indicate the list of gscan cached results.
+ */
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_CACHED_RESULTS_LIST,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_CACHED_RESULTS_SCAN_ID,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_CACHED_RESULTS_FLAGS,
+ /* Use attr QCA_WLAN_VENDOR_ATTR_EXTSCAN_NUM_RESULTS_AVAILABLE
+ * to indicate number of wifi scan results/bssids retrieved by the scan.
+ * Also, use QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_LIST to indicate the
+ * list of wifi scan results returned for each cached result block.
+ */
+
+ /* EXTSCAN attributes for
+ * QCA_NL80211_VENDOR_SUBCMD_PNO_NETWORK_FOUND sub-command.
+ */
+ /* Use QCA_WLAN_VENDOR_ATTR_EXTSCAN_NUM_RESULTS_AVAILABLE for number
+ * of results.
+ * Use QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_LIST to indicate the nested
+ * list of wifi scan results returned for each
+ * wifi_passpoint_match_result block.
+ * Array size: QCA_WLAN_VENDOR_ATTR_EXTSCAN_NUM_RESULTS_AVAILABLE.
+ */
+
+ /* EXTSCAN attributes for
+ * QCA_NL80211_VENDOR_SUBCMD_PNO_PASSPOINT_NETWORK_FOUND sub-command.
+ */
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_NETWORK_FOUND_NUM_MATCHES,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_RESULT_LIST,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_ID,
+ /* Use QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_LIST to indicate the nested
+ * list of wifi scan results returned for each
+ * wifi_passpoint_match_result block.
+ */
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_ANQP_LEN,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_ANQP,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_HOTLIST_SSIDS,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_NUM_EPNO_NETS,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_NUM_EPNO_NETS_BY_SSID,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_NUM_WHITELISTED_SSID,
+
+ /* EXTSCAN attributes for
+ * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_FOUND sub-command &
+ * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_LOST sub-command
+ */
+ /* Use attr QCA_WLAN_VENDOR_ATTR_EXTSCAN_NUM_RESULTS_AVAILABLE
+ * to indicate number of results.
+ */
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_BUCKETS_SCANNED,
+
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_MAX_NUM_BLACKLISTED_BSSID,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_MAX =
+ QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_AFTER_LAST - 1,
+};
+
+#endif
+
+#ifdef WLAN_FEATURE_LINK_LAYER_STATS
+
+/**
+ * enum qca_wlan_vendor_attr_ll_stats_set - vendor attribute set stats
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_INVALID: Invalid initial value
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_MPDU_SIZE_THRESHOLD: Size threshold
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_AGGRESSIVE_STATS_GATHERING:
+ * Aggresive stats gathering
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_MAX: Max value
+ */
+enum qca_wlan_vendor_attr_ll_stats_set {
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_MPDU_SIZE_THRESHOLD = 1,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_AGGRESSIVE_STATS_GATHERING,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_MAX =
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ll_stats_get - vendor attribute get stats
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_INVALID: Invalid initial value
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_ID: Unsigned 32bit value
+ * provided by the caller issuing the GET stats command. When reporting
+ * the stats results, the driver uses the same value to indicate which
+ * GET request the results correspond to.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_MASK: Get config request mask
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_RSP_MASK: Config response mask
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_RSP: Config stop response
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_MAX: Max value
+ */
+enum qca_wlan_vendor_attr_ll_stats_get {
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_ID,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_MASK,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_MAX =
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ll_stats_clr - vendor attribute clear stats
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_INVALID: Invalid initial value
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_REQ_MASK: Config request mask
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_REQ: Config stop mask
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_RSP_MASK: Config response mask
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_RSP: Config stop response
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_MAX: Max value
+ */
+enum qca_wlan_vendor_attr_ll_stats_clr {
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_REQ_MASK,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_REQ,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_RSP_MASK,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_RSP,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_MAX =
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ll_stats_results_type - ll stats result type
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_INVALID: Initial invalid value
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_RADIO: Link layer stats type radio
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_IFACE: Link layer stats type interface
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_PEER: Link layer stats type peer
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_AFTER_LAST: Last value
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_MAX: Max value
+ */
+enum qca_wlan_vendor_attr_ll_stats_results_type {
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_INVALID = 0,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_RADIO = 1,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_IFACE,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_PEER,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_MAX =
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ll_stats_results - vendor attribute stats results
+ *
+ * Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_* are nested
+ * within the interface stats.
+ *
+ * Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_* could be nested
+ * within the interface stats.
+ *
+ * Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_* are nested
+ * within the interface stats.
+ *
+ * Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_* could be nested
+ * within the peer info stats.
+ *
+ * Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_* could be
+ * nested within the channel stats.
+ *
+ * Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_ could be nested
+ * within the radio stats.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_INVALID: Invalid initial value
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_REQ_ID: Unsigned 32bit value
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_BEACON_RX: Unsigned 32bit value
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_RX: Unsigned 32bit value
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_RX: Unsigned 32bit value
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_TX: Unsigned 32bit value
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_MGMT: Unsigned 32bit value
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_DATA: Unsigned 32bit value
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_ACK: Unsigned 32bit value
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MODE: Interface mode, e.g., STA,
+ * SOFTAP, IBSS, etc. Type = enum wifi_interface_mode
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MAC_ADDR: Interface MAC address.
+ * An array of 6 Unsigned int8_t
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_STATE:
+ * Type = enum wifi_connection_state, e.g., DISCONNECTED, AUTHENTICATING,
+ * etc. Valid for STA, CLI only
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_ROAMING:
+ * Type = enum wifi_roam_state. Roaming state, e.g., IDLE or ACTIVE
+ * (is that valid for STA only?)
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_CAPABILITIES: Unsigned 32bit value.
+ * WIFI_CAPABILITY_XXX
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_SSID: NULL terminated SSID. An
+ * array of 33 Unsigned 8bit values
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_BSSID: BSSID. An array of 6
+ * Unsigned 8bit values
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_AP_COUNTRY_STR: Country string
+ * advertised by AP. An array of 3 Unsigned 8bit values
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_COUNTRY_STR: Country string for
+ * this association. An array of 3 Unsigned 8bit values
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_AC: Type = enum wifi_traffic_ac e.g.
+ * V0, VI, BE and BK
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MPDU: Unsigned int 32 value
+ * corresponding to respective AC
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MPDU: Unsigned int 32 value
+ * corresponding to respective AC
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MCAST: Unsigned int 32 value
+ * corresponding to respective AC
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MCAST: Unsigned int 32 value
+ * corresponding to respective AC
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_AMPDU: Unsigned int 32 value
+ * corresponding to respective AC
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_AMPDU: Unsigned int 32 value
+ * corresponding to respective AC
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_MPDU_LOST: Unsigned int 32 value
+ * corresponding to respective AC
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES: Unsigned int 32 value
+ * corresponding to respective AC
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_SHORT: Unsigned int 32 value
+ * corresponding to respective AC
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MIN: Unsigned int 32
+ * value corresponding to respective AC
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MAX: Unsigned int 32
+ * value corresponding to respective AC
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_AVG: Unsigned int 32
+ * value corresponding to respective AC
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_NUM_SAMPLES: Unsigned int 32
+ * value corresponding to respective AC
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_NUM_PEERS: Unsigned int 32
+ * value corresponding to respective AC
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_TYPE: Type = enum wifi_peer_type
+ * Peer type, e.g., STA, AP, P2P GO etc
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_MAC_ADDRESS: MAC addr corresponding
+ * to respective peer. An array of 6 Unsigned 8bit values
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_CAPABILITIES: Unsigned int 32bit
+ * value representing capabilities corresponding to respective peer.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_NUM_RATES: Unsigned 32bit value.
+ * Number of rates
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_PREAMBLE: Unsigned int 8bit value:
+ * 0: OFDM, 1:CCK, 2:HT 3:VHT 4..7 reserved
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_NSS: Unsigned int 8bit value:
+ * 0:1x1, 1:2x2, 3:3x3, 4:4x4
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BW: Unsigned int 8bit value:
+ * 0:20MHz, 1:40Mhz, 2:80Mhz, 3:160Mhz
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MCS_INDEX: Unsigned int 8bit value:
+ * OFDM/CCK rate code would be as per IEEE Std in the units of 0.5mbps
+ * HT/VHT it would be mcs index
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BIT_RATE: Unsigned 32bit value.
+ * Bit rate in units of 100Kbps
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_TX_MPDU: Unsigned int 32bit value.
+ * Number of successfully transmitted data pkts i.e., with ACK received
+ * corresponding to the respective rate
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RX_MPDU: Unsigned int 32bit value.
+ * Number of received data pkts corresponding to the respective rate
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MPDU_LOST: Unsigned int 32bit value.
+ * Number of data pkts losses, i.e., no ACK received corresponding to
+ * the respective rate
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES: Unsigned int 32bit value.
+ * Total number of data pkt retries for the respective rate
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_SHORT: Unsigned int 32bit value.
+ * Total number of short data pkt retries for the respective rate
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_LONG: Unsigned int 32bit value.
+ * Total number of long data pkt retries for the respective rate
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ID: Radio id
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME: Unsigned 32bit value.
+ * Total number of msecs the radio is awake accruing over time
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME: Unsigned 32bit value.
+ * Total number of msecs the radio is transmitting accruing over time
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_RX_TIME: Unsigned 32bit value.
+ * Total number of msecs the radio is in active receive accruing over time
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_SCAN: Unsigned 32bit value.
+ * Total number of msecs the radio is awake due to all scan accruing
+ * over time
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_NBD: Unsigned 32bit value.
+ * Total number of msecs the radio is awake due to NAN accruing over time.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_GSCAN: Unsigned 32bit value.
+ * Total number of msecs the radio is awake due to GSCAN accruing over time
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_ROAM_SCAN: Unsigned 32bit value.
+ * Total number of msecs the radio is awake due to roam scan accruing over
+ * time.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_PNO_SCAN: Unsigned 32bit value.
+ * Total number of msecs the radio is awake due to PNO scan accruing over
+ * time.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_HS20: Unsigned 32bit value.
+ * Total number of msecs the radio is awake due to HS2.0 scans and GAS
+ * exchange accruing over time.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_CHANNELS: Unsigned 32bit value.
+ * Number of channels
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_WIDTH:
+ * Type = enum wifi_channel_width. Channel width, e.g., 20, 40, 80, etc.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ:
+ * Unsigned 32bit value. Primary 20MHz channel.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ0:
+ * Unsigned 32bit value. Center frequency (MHz) first segment.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ1:
+ * Unsigned 32bit value. Center frequency (MHz) second segment.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_ON_TIME: Unsigned int 32bit value
+ * representing total number of msecs the radio is awake on that channel
+ * accruing over time, corresponding to the respective channel.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_CCA_BUSY_TIME: Unsigned int 32bit
+ * value representing total number of msecs the CCA register is busy
+ * accruing over time corresponding to the respective channel.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_NUM_RADIOS: Number of radios
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO: Channel info
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO: Peer info
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_RATE_INFO: Peer rate info
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_INFO: WMM info
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_MORE_DATA: Unsigned 8bit value.
+ * Used by the driver; if set to 1, it indicates that more stats, e.g.,
+ * peers or radio, are to follow in the next
+ * QCA_NL80211_VENDOR_SUBCMD_LL_STATS_*_RESULTS event. Otherwise, it
+ * is set to 0.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_AVERAGE_TSF_OFFSET: tsf offset
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_DETECTED: leaky ap detected
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_AVG_NUM_FRAMES_LEAKED:
+ * average number of frames leaked
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_GUARD_TIME: guard time
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_FEATURE_SET_MAX: Max value
+ */
+
+enum qca_wlan_vendor_attr_ll_stats_results {
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_REQ_ID = 1,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_BEACON_RX,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_RX,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_RX,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_TX,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_MGMT,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_DATA,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_ACK,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MODE,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MAC_ADDR,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_STATE,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_ROAMING,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_CAPABILITIES,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_SSID,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_BSSID,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_AP_COUNTRY_STR,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_COUNTRY_STR,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_AC,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MPDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MPDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MCAST,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MCAST,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_AMPDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_AMPDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_MPDU_LOST,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_SHORT,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_LONG,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MIN,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MAX,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_AVG,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_NUM_SAMPLES,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_NUM_PEERS,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_TYPE,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_MAC_ADDRESS,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_CAPABILITIES,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_NUM_RATES,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_PREAMBLE,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_NSS,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BW,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MCS_INDEX,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BIT_RATE,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_TX_MPDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RX_MPDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MPDU_LOST,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_SHORT,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_LONG,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ID,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_RX_TIME,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_SCAN,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_NBD,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_GSCAN,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_ROAM_SCAN,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_PNO_SCAN,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_HS20,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_CHANNELS,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_WIDTH,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ0,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ1,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_ON_TIME,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_CCA_BUSY_TIME,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_NUM_RADIOS,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_RATE_INFO,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_INFO,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_MORE_DATA,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_AVERAGE_TSF_OFFSET,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_DETECTED,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_AVG_NUM_FRAMES_LEAKED,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_GUARD_TIME,
+
+ /* Unsigned 32bit value to indicate ll stats result type */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE,
+
+ /* Unsigned 32bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_TX_LEVELS,
+
+ /* Unsigned 32bit value
+ * Number of msecs the radio spent in transmitting for each power level
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME_PER_LEVEL,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_MAX =
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST - 1
+};
+
+#endif /* WLAN_FEATURE_LINK_LAYER_STATS */
+
+/**
+ * enum qca_wlan_vendor_attr_get_supported_features - get supported feature
+ *
+ * @QCA_WLAN_VENDOR_ATTR_FEATURE_SET_INVALID: Invalid initial value
+ * @QCA_WLAN_VENDOR_ATTR_FEATURE_SET: Unsigned 32bit value
+ * @QCA_WLAN_VENDOR_ATTR_FEATURE_SET_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_FEATURE_SET_MAX: Max value
+ */
+enum qca_wlan_vendor_attr_get_supported_features {
+ QCA_WLAN_VENDOR_ATTR_FEATURE_SET_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_FEATURE_SET = 1,
+ QCA_WLAN_VENDOR_ATTR_FEATURE_SET_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_FEATURE_SET_MAX =
+ QCA_WLAN_VENDOR_ATTR_FEATURE_SET_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_set_scanning_mac_oui - set scanning mac oui
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_INVALID: Invalid initial value
+ * @QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI: An array of 3 x Unsigned 8-bit
+ * value
+ * @QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_MAX: Max value
+ */
+enum qca_wlan_vendor_attr_set_scanning_mac_oui {
+ QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI = 1,
+ QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_MAX =
+ QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_scan - Specifies vendor scan attributes
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_IE: IEs that should be included as part of scan
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES: Nested unsigned 32-bit attributes
+ * with frequencies to be scanned (in MHz)
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS: Nested attribute with SSIDs to be scanned
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES: Nested array attribute of supported
+ * rates to be included
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE: flag used to send probe requests
+ * at non CCK rate in 2GHz band
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS: Unsigned 32-bit scan flags
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE: Unsigned 64-bit cookie provided by the
+ * driver for the specific scan request
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_STATUS: Unsigned 8-bit status of the scan
+ * request decoded as in enum scan_status
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_MAC: 6-byte MAC address to use when randomisation
+ * scan flag is set
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK: 6-byte MAC address mask to be used with
+ * randomisation
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_BSSID: BSSID provided to do scan for specific BSS
+ */
+enum qca_wlan_vendor_attr_scan {
+ QCA_WLAN_VENDOR_ATTR_SCAN_INVALID_PARAM = 0,
+ QCA_WLAN_VENDOR_ATTR_SCAN_IE,
+ QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES,
+ QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS,
+ QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES,
+ QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE,
+ QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS,
+ QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE,
+ QCA_WLAN_VENDOR_ATTR_SCAN_STATUS,
+ QCA_WLAN_VENDOR_ATTR_SCAN_MAC,
+ QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK,
+ QCA_WLAN_VENDOR_ATTR_SCAN_BSSID,
+ QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SCAN_MAX =
+ QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST - 1
+};
+
+/**
+ * enum scan_status - Specifies the valid values the vendor scan attribute
+ * QCA_WLAN_VENDOR_ATTR_SCAN_STATUS can take
+ * @VENDOR_SCAN_STATUS_NEW_RESULTS: implies the vendor scan is successful with
+ * new scan results
+ * @VENDOR_SCAN_STATUS_ABORTED: implies the vendor scan was aborted in-between
+ */
+enum scan_status {
+ VENDOR_SCAN_STATUS_NEW_RESULTS,
+ VENDOR_SCAN_STATUS_ABORTED,
+ VENDOR_SCAN_STATUS_MAX,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_get_concurrency_matrix - get concurrency matrix
+ *
+ * NL attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX sub command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_INVALID: Invalid initial value
+ * @QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_CONFIG_PARAM_SET_SIZE_MAX:
+ * Unsigned 32-bit value
+ * @QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_RESULTS_SET_SIZE:
+ * Unsigned 32-bit value
+ * @QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_RESULTS_SET: Set results. An
+ * array of SET_SIZE x Unsigned 32bit values representing concurrency
+ * combinations
+ * @QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_MAX: Max value
+ */
+enum qca_wlan_vendor_attr_get_concurrency_matrix {
+ QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_CONFIG_PARAM_SET_SIZE_MAX
+ = 1,
+ QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_RESULTS_SET_SIZE = 2,
+ QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_RESULTS_SET = 3,
+ QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_MAX =
+ QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_set_no_dfs_flag - vendor attribute set no dfs flag
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_INVALID: Invalid initial value
+ * @QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG: Unsigned 32-bit value
+ * @QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_MAX: Max value
+ */
+enum qca_wlan_vendor_attr_set_no_dfs_flag {
+ QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG = 1,
+ QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_MAX =
+ QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_vendor_attr_wisa_cmd
+ * @QCA_WLAN_VENDOR_ATTR_WISA_INVALID: Invalid attr
+ * @QCA_WLAN_VENDOR_ATTR_WISA_MODE: WISA mode value attr (u32)
+ * @QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_WISA_MAX: Max Value
+ * WISA setup vendor commands
+ */
+enum qca_vendor_attr_wisa_cmd {
+ QCA_WLAN_VENDOR_ATTR_WISA_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_WISA_MODE,
+ QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_WISA_MAX =
+ QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_roam_auth - vendor event for roaming
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID: BSSID of the roamed AP
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REQ_IE: Request IE
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RESP_IE: Response IE
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AUTHORIZED: Authorization Status
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR: Replay Counter
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK: KCK of the PTK
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KEK: KEK of the PTK
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_SUBNET_STATUS: subnet change status
+ */
+enum qca_wlan_vendor_attr_roam_auth {
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REQ_IE,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RESP_IE,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AUTHORIZED,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KEK,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_SUBNET_STATUS,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_MAX =
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_wifi_config - wifi config
+ *
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_INVALID: Invalid initial value
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_DYNAMIC_DTIM: dynamic DTIM
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_STATS_AVG_FACTOR: avg factor
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_GUARD_TIME: guard time
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_AFTER_LAST: after last
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_MAX: max value
+ */
+enum qca_wlan_vendor_attr_wifi_config {
+ QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_DYNAMIC_DTIM = 1,
+ QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_STATS_AVG_FACTOR = 2,
+ QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_GUARD_TIME = 3,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_MAX =
+ QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_epno_type - the type of request to the EPNO command
+ * @QCA_WLAN_EPNO: epno type request
+ * @QCA_WLAN_PNO: pno type request
+ */
+enum qca_wlan_epno_type {
+ QCA_WLAN_EPNO,
+ QCA_WLAN_PNO
+};
+
+/**
+ * enum qca_wlan_vendor_attr_pno_config_params - pno config params
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PNO_INVALID - Invalid initial value
+ *
+ * NL attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_PNO_SET_PASSPOINT_LIST sub command.
+ * @QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM:
+ * Unsigned 32-bit value; pno passpoint number of networks
+ * @QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NETWORK_ARRAY:
+ * Array of nested QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_*
+ * attributes. Array size =
+ * QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM.
+ * @QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ID:
+ * Unsigned 32-bit value; network id
+ * @QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_REALM:
+ * An array of 256 x Unsigned 8-bit value; NULL terminated UTF8 encoded
+ * realm, 0 if unspecified.
+ * @QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_CNSRTM_ID:
+ * An array of 16 x Unsigned 32-bit value; roaming consortium ids
+ * to match, 0 if unspecified.
+ * @QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_PLMN:
+ * An array of 6 x Unsigned 8-bit value; mcc/mnc combination, 0s if
+ * unspecified.
+ *
+ * NL attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_PNO_SET_LIST sub command.
+ * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS:
+ * Unsigned 32-bit value; set pno number of networks
+ * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORKS_LIST:
+ * Array of nested
+ * QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_*
+ * attributes. Array size =
+ * QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS
+ * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_SSID:
+ * An array of 33 x Unsigned 8-bit value; NULL terminated SSID
+ * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_RSSI_THRESHOLD:
+ * Signed 8-bit value; threshold for considering this SSID as found,
+ * required granularity for this threshold is 4dBm to 8dBm
+ * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_FLAGS:
+ * Unsigned 8-bit value; WIFI_PNO_FLAG_XXX
+ * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_AUTH_BIT:
+ * Unsigned 8-bit value; auth bit field for matching WPA IE
+ * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_TYPE
+ * Unsigned 8-bit to indicate ePNO type; values from qca_wlan_epno_type
+ *@QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_CHANNEL_LIST
+ * Nested attribute to send the channel list
+ *@QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_SCAN_INTERVAL
+ * Unsigned 32-bit value; indicates the Interval between PNO scan
+ * cycles in msec
+ *@QCA_WLAN_VENDOR_ATTR_EPNO_MIN5GHZ_RSSI
+ * Signed 32-bit value; minimum 5GHz RSSI for a BSSID to be considered
+ *@QCA_WLAN_VENDOR_ATTR_EPNO_MIN24GHZ_RSSI
+ * Signed 32-bit value; minimum 2.4GHz RSSI for a BSSID to be considered
+ * This attribute is obsolete now.
+ *@QCA_WLAN_VENDOR_ATTR_EPNO_INITIAL_SCORE_MAX
+ * Signed 32-bit value; the maximum score that a network
+ * can have before bonuses
+ *@QCA_WLAN_VENDOR_ATTR_EPNO_CURRENT_CONNECTION_BONUS
+ * Signed 32-bit value; only report when there is a network's
+ * score this much higher han the current connection
+ *@QCA_WLAN_VENDOR_ATTR_EPNO_SAME_NETWORK_BONUS
+ * Signed 32-bit value; score bonus for all networks with
+ * the same network flag
+ *@QCA_WLAN_VENDOR_ATTR_EPNO_SECURE_BONUS
+ * Signed 32-bit value; score bonus for networks that are not open
+ *@QCA_WLAN_VENDOR_ATTR_EPNO_BAND5GHZ_BONUS
+ * Signed 32-bit value; 5GHz RSSI score bonus applied to all
+ * 5GHz networks
+ * @QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_PNO_MAX: max
+ */
+enum qca_wlan_vendor_attr_pno_config_params {
+ QCA_WLAN_VENDOR_ATTR_PNO_INVALID = 0,
+
+ QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM = 1,
+ QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NETWORK_ARRAY = 2,
+ QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ID = 3,
+ QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_REALM = 4,
+ QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_CNSRTM_ID = 5,
+ QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_PLMN = 6,
+
+ QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS = 7,
+ QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORKS_LIST = 8,
+ QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_SSID = 9,
+ QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_RSSI_THRESHOLD = 10,
+ QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_FLAGS = 11,
+ QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_AUTH_BIT = 12,
+ QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_TYPE = 13,
+ QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_CHANNEL_LIST = 14,
+ QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_SCAN_INTERVAL = 15,
+ QCA_WLAN_VENDOR_ATTR_EPNO_MIN5GHZ_RSSI = 16,
+ QCA_WLAN_VENDOR_ATTR_EPNO_MIN24GHZ_RSSI = 17,
+ QCA_WLAN_VENDOR_ATTR_EPNO_INITIAL_SCORE_MAX = 18,
+ QCA_WLAN_VENDOR_ATTR_EPNO_CURRENT_CONNECTION_BONUS = 19,
+ QCA_WLAN_VENDOR_ATTR_EPNO_SAME_NETWORK_BONUS = 20,
+ QCA_WLAN_VENDOR_ATTR_EPNO_SECURE_BONUS = 21,
+ QCA_WLAN_VENDOR_ATTR_EPNO_BAND5GHZ_BONUS = 22,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_PNO_MAX =
+ QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_roaming_config_params - roaming config params
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_INVALID: Invalid initial value
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD: roaming sub command
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID: Request id
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS:
+ * number of whitelist networks
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST:
+ * Whitelist ssid list
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID:
+ * white list ssid
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_THRESHOLD:
+ * 'a' band boost threshold
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_THRESHOLD:
+ * 'a' band penalty threshold
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_FACTOR:
+ * 'a' band boost factor
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_FACTOR:
+ * 'a' band penalty factor
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_MAX_BOOST:
+ * 'a' band max boost
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_LAZY_ROAM_HISTERESYS:
+ * lazy roam histeresys
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALERT_ROAM_RSSI_TRIGGER:
+ * alert roam rssi trigger
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE:
+ * set lazy roam enable
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS:
+ * set bssid preference
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_NUM_BSSID:
+ * set lazy roam number of bssid
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_BSSID:
+ * set lazy roam bssid
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_RSSI_MODIFIER:
+ * set lazy roam rssi modifier
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS:
+ * set bssid params
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID:
+ * set bssid params num bssid
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID:
+ * set bssid params bssid
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_MAX: Max
+ */
+enum qca_wlan_vendor_attr_roaming_config_params {
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_INVALID = 0,
+
+ QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD = 1,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID = 2,
+
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS = 3,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST = 4,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID = 5,
+
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_THRESHOLD = 6,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_THRESHOLD = 7,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_FACTOR = 8,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_FACTOR = 9,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_MAX_BOOST = 10,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_LAZY_ROAM_HISTERESYS = 11,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALERT_ROAM_RSSI_TRIGGER = 12,
+
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE = 13,
+
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS = 14,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_NUM_BSSID = 15,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_BSSID = 16,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_RSSI_MODIFIER = 17,
+
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS = 18,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID = 19,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID = 20,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_MAX =
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_roam_subcmd - roam sub commands
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_INVALID: Invalid initial value
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SSID_WHITE_LIST: ssid white list
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_EXTSCAN_ROAM_PARAMS: roam params
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_LAZY_ROAM: set lazy roam
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BSSID_PREFS: set bssid prefs
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BSSID_PARAMS: set bssid params
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BLACKLIST_BSSID: set blacklist bssid
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_AFTER_LAST: after last
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_MAX: subcmd max
+ */
+enum qca_wlan_vendor_attr_roam_subcmd {
+ QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SSID_WHITE_LIST = 1,
+ QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_EXTSCAN_ROAM_PARAMS = 2,
+ QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_LAZY_ROAM = 3,
+ QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BSSID_PREFS = 4,
+ QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BSSID_PARAMS = 5,
+ QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BLACKLIST_BSSID = 6,
+
+ /* KEEP LAST */
+ QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_MAX =
+ QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_get_wifi_info - wifi driver information
+ *
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_INVALID: Invalid initial value
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_DRIVER_VERSION: get host driver version
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_FIRMWARE_VERSION: ger firmware version
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_RADIO_INDEX - get radio index
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST: after last
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_MAX: subcmd max
+ */
+enum qca_wlan_vendor_attr_get_wifi_info {
+ QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_WIFI_INFO_DRIVER_VERSION = 1,
+ QCA_WLAN_VENDOR_ATTR_WIFI_INFO_FIRMWARE_VERSION = 2,
+ QCA_WLAN_VENDOR_ATTR_WIFI_INFO_RADIO_INDEX = 3,
+
+ /* KEEP LAST */
+ QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_MAX =
+ QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_get_logger_features - value for logger
+ * supported features
+ * @QCA_WLAN_VENDOR_ATTR_LOGGER_INVALID - Invalid
+ * @QCA_WLAN_VENDOR_ATTR_LOGGER_SUPPORTED - Indicate the supported features
+ * @QCA_WLAN_VENDOR_ATTR_LOGGER_AFTER_LAST - To keep track of the last enum
+ * @QCA_WLAN_VENDOR_ATTR_LOGGER_MAX - max value possible for this type
+ *
+ * enum values are used for NL attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET sub command.
+ */
+enum qca_wlan_vendor_attr_get_logger_features {
+ QCA_WLAN_VENDOR_ATTR_LOGGER_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_LOGGER_SUPPORTED = 1,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_LOGGER_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LOGGER_MAX =
+ QCA_WLAN_VENDOR_ATTR_LOGGER_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_link_properties - link properties
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_INVALID: Invalid initial value
+ * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_NSS: Unsigned 8-bit value to
+ * specify the number of spatial streams negotiated
+ * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_RATE_FLAGS: Unsigned 8-bit value
+ * to specify negotiated rate flags i.e. ht, vht and channel width
+ * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_FREQ: Unsigned 32bit value to
+ * specify the operating frequency
+ * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_AFTER_LAST: after last
+ * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAX: max value
+ */
+enum qca_wlan_vendor_attr_link_properties {
+ QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_NSS = 1,
+ QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_RATE_FLAGS = 2,
+ QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_FREQ = 3,
+
+ /* KEEP LAST */
+ QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAX =
+ QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_nd_offload - vendor NS offload support
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_INVALID - Invalid
+ * @QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_FLAG - Flag to set NS offload
+ * @QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_AFTER_LAST - To keep track of the last enum
+ * @QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_MAX - max value possible for this type
+ *
+ * enum values are used for NL attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_ND_OFFLOAD sub command.
+ */
+enum qca_wlan_vendor_attr_nd_offload {
+ QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_FLAG,
+
+ /* Keep last */
+ QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_MAX =
+ QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_features - vendor device/driver features
+ * @QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD: Device supports key
+ * management offload, a mechanism where the station's firmware
+ * does the exchange with the AP to establish the temporal keys
+ * after roaming, rather than having the supplicant do it.
+ * @QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS: Device supports
+ * simultaneous off-channel operations.
+ * @QQCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD: Device supports P2P
+ * Listen offload; a mechanism where the station's firmware
+ * takes care of responding to incoming Probe Request frames received
+ * from other P2P devices whilst in Listen state, rather than having the
+ * user space wpa_supplicant do it. Information from received P2P
+ * Requests are forwarded from firmware to host whenever the APPS
+ * processor exits power collapse state.
+ */
+enum qca_wlan_vendor_features {
+ QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD = 0,
+ QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY = 1,
+ QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS = 2,
+ QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD = 3,
+ /* Additional features need to be added above this */
+ NUM_QCA_WLAN_VENDOR_FEATURES
+};
+
+/**
+ * enum qca_wlan_vendor_attr_sap_conditional_chan_switch - Parameters for SAP
+ * conditional channel switch
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_INVALID: Invalid initial
+ * value
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST: Priority based
+ * frequency list (an array of u32 values in host byte order)
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS: Status of the
+ * conditional switch (u32)- 0: Success, Non-zero: Failure
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST: After last
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_MAX: Subcommand max
+ */
+enum qca_wlan_vendor_attr_sap_conditional_chan_switch {
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST = 1,
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS = 2,
+
+ /* Keep Last */
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_MAX =
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST - 1,
+};
+
+/**
+ * enum wifi_logger_supported_features - values for supported logger features
+ * @WIFI_LOGGER_MEMORY_DUMP_SUPPORTED - Memory dump of FW
+ * @WIFI_LOGGER_PER_PACKET_TX_RX_STATUS_SUPPORTED - Per packet statistics
+ * @WIFI_LOGGER_CONNECT_EVENT_SUPPORTED - Logging of Connectivity events
+ * @WIFI_LOGGER_POWER_EVENT_SUPPORTED - Power of driver
+ * @WIFI_LOGGER_WAKE_LOCK_SUPPORTED - Wakelock of driver
+ * @WIFI_LOGGER_WATCHDOG_TIMER_SUPPORTED - monitor FW health
+ */
+enum wifi_logger_supported_features {
+ WIFI_LOGGER_MEMORY_DUMP_SUPPORTED = (1 << (0)),
+ WIFI_LOGGER_PER_PACKET_TX_RX_STATUS_SUPPORTED = (1 << (1)),
+ WIFI_LOGGER_CONNECT_EVENT_SUPPORTED = (1 << (2)),
+ WIFI_LOGGER_POWER_EVENT_SUPPORTED = (1 << (3)),
+ WIFI_LOGGER_WAKE_LOCK_SUPPORTED = (1 << (4)),
+ WIFI_LOGGER_VERBOSE_SUPPORTED = (1 << (5)),
+ WIFI_LOGGER_WATCHDOG_TIMER_SUPPORTED = (1 << (6)),
+};
+/**
+ * enum qca_wlan_vendor_attr_acs_offload
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL: ACS selected primary channel
+ * @QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL: ACS selected secondary channel
+ * @QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE: hw_mode for ACS
+ * @QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED: indicate if HT capability is enabled
+ * @QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED: indicate HT capability
+ */
+enum qca_wlan_vendor_attr_acs_offload {
+ QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL,
+ QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL,
+ QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE,
+ QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED,
+ QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED,
+ QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH,
+ QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL,
+ QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ACS_MAX =
+ QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_acs_hw_mode
+ *
+ * @QCA_ACS_MODE_IEEE80211B: 11b mode
+ * @QCA_ACS_MODE_IEEE80211G: 11g mode
+ * @QCA_ACS_MODE_IEEE80211A: 11a mode
+ * @QCA_ACS_MODE_IEEE80211AD: 11ad mode
+ */
+enum qca_wlan_vendor_acs_hw_mode {
+ QCA_ACS_MODE_IEEE80211B,
+ QCA_ACS_MODE_IEEE80211G,
+ QCA_ACS_MODE_IEEE80211A,
+ QCA_ACS_MODE_IEEE80211AD,
+ QCA_ACS_MODE_IEEE80211ANY,
+};
+
+/**
+ * enum qca_access_policy - access control policy
+ *
+ * Access control policy is applied on the configured IE
+ * (QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE).
+ * To be set with QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY.
+ *
+ * @QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED: Deny Wi-Fi Connections which match
+ *» with the specific configuration (IE) set, i.e. allow all the
+ *» connections which do not match the configuration.
+ * @QCA_ACCESS_POLICY_DENY_UNLESS_LISTED: Accept Wi-Fi Connections which match
+ *» with the specific configuration (IE) set, i.e. deny all the
+ *» connections which do not match the configuration.
+ */
+enum qca_access_policy {
+ QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED,
+ QCA_ACCESS_POLICY_DENY_UNLESS_LISTED,
+};
+
+/**
+ * enum qca_ignore_assoc_disallowed - Ignore assoc disallowed values
+ *
+ * The valid values for the ignore assoc disallowed
+ *
+ * @QCA_IGNORE_ASSOC_DISALLOWED_DISABLE: Disable ignore assoc disallowed
+ * @QCA_IGNORE_ASSOC_DISALLOWED_ENABLE: Enable ignore assoc disallowed
+ *
+ */
+enum qca_ignore_assoc_disallowed {
+ QCA_IGNORE_ASSOC_DISALLOWED_DISABLE,
+ QCA_IGNORE_ASSOC_DISALLOWED_ENABLE
+};
+
+/**
+ * enum qca_wlan_vendor_config: wifi config attr
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_INVALID: invalid config
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_MODULATED_DTIM: modulated dtim
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_STATS_AVG_FACTOR: stats avg. factor
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_GUARD_TIME: guard time
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_FINE_TIME_MEASUREMENT: fine time measurement
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION:
+ * Tx aggregation size (8-bit unsigned value)
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION:
+ * Rx aggregation size (8-bit unsigned value)
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY:
+ * Non aggregrate/11g sw retry threshold
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY: aggregrate sw retry threshold
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY: management frame sw retry threshold
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY: control frame sw retry threshold
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY:
+ * propagation delay for 2G/5G band (units in us)
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_DEFAULT_IES: Update the default scan IEs
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_COMMAND:
+ * Unsigned 32-bit value attribute for generic commands
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_VALUE:
+ * Unsigned 32-bit data attribute for generic command response
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA:
+ * Unsigned 32-bit data attribute for generic command response
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_LENGTH:
+ * Unsigned 32-bit length attribute for
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_FLAGS:
+ * Unsigned 32-bit flags attribute for QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY: Vendor IE access policy
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST: Vendor IE to be used
+ * with access policy
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_IFINDEX: interface index for vdev specific
+ * parameters
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_QPOWER: Unsigned 8bit length attribute to update
+ * power save config to turn off/on qpower
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_IGNORE_ASSOC_DISALLOWED: Ignore Assoc Disallowed
+ * [MBO]
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TX_FAIL_COUNT: Unsigned 32-bit value to
+ * configure the number of unicast TX fail packet count.
+ * The peer is disconnected once this threshold is reached.
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_LAST: last config
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_MAX: max config
+ */
+enum qca_wlan_vendor_config {
+ QCA_WLAN_VENDOR_ATTR_CONFIG_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_MODULATED_DTIM,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_STATS_AVG_FACTOR,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GUARD_TIME,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_FINE_TIME_MEASUREMENT,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_PENALIZE_AFTER_NCONS_BEACON_MISS,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_AVOIDANCE_IND,
+
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION,
+
+ /* 8-bit unsigned value to configure the Non aggregrate/11g sw
+ * retry threshold (0 disable, 31 max).
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY,
+ /* 8-bit unsigned value to configure the aggregrate sw
+ * retry threshold (0 disable, 31 max).
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY,
+ /* 8-bit unsigned value to configure the MGMT frame
+ * retry threshold (0 disable, 31 max).
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY,
+ /* 8-bit unsigned value to configure the CTRL frame
+ * retry threshold (0 disable, 31 max).
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY,
+ /* 8-bit unsigned value to configure the propagation delay for
+ * 2G/5G band (0~63, units in us)
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY,
+
+ /* Attribute used to set scan default IEs to the driver.
+ *
+ * These IEs can be used by scan operations that will be initiated by
+ * the driver/firmware.
+ *
+ * For further scan requests coming to the driver, these IEs should be
+ * merged with the IEs received along with scan request coming to the
+ * driver. If a particular IE is present in the scan default IEs but not
+ * present in the scan request, then that IE should be added to the IEs
+ * sent in the Probe Request frames for that scan request.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_DEFAULT_IES,
+ /* Unsigned 32-bit attribute for generic commands */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_COMMAND,
+ /* Unsigned 32-bit value attribute for generic commands */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_VALUE,
+ /* Unsigned 32-bit data attribute for generic command response */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA,
+ /* Unsigned 32-bit length attribute for
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_LENGTH,
+ /* Unsigned 32-bit flags attribute for
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_FLAGS,
+ /* Unsigned 32-bit, defining the access policy.
+ * See enum qca_access_policy. Used with
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY,
+ /* Sets the list of full set of IEs for which a specific access policy
+ * has to be applied. Used along with
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY to control the access.
+ * Zero length payload can be used to clear this access constraint.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST,
+ /* Unsigned 32-bit, specifies the interface index (netdev) for which the
+ * corresponding configurations are applied. If the interface index is
+ * not specified, the configurations are attributed to the respective
+ * wiphy.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_IFINDEX,
+ /* Unsigned 8-bit, for setting qpower dynamically */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_QPOWER = 25,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_IGNORE_ASSOC_DISALLOWED = 26,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TX_FAIL_COUNT,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_LAST,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_MAX =
+ QCA_WLAN_VENDOR_ATTR_CONFIG_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_wifi_logger_start - Enum for wifi logger starting
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_INVALID: Invalid attribute
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_RING_ID: Ring ID
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_VERBOSE_LEVEL: Verbose level
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_FLAGS: Flag
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST: Last value
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_MAX: Max value
+ */
+enum qca_wlan_vendor_attr_wifi_logger_start {
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_RING_ID = 1,
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_VERBOSE_LEVEL = 2,
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_FLAGS = 3,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_MAX =
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST - 1,
+};
+
+/*
+ * enum qca_wlan_vendor_attr_wifi_logger_get_ring_data - Get ring data
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_INVALID: Invalid attribute
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_ID: Ring ID
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_AFTER_LAST: Last value
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_MAX: Max value
+ */
+enum qca_wlan_vendor_attr_wifi_logger_get_ring_data {
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_ID = 1,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_MAX =
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_AFTER_LAST - 1,
+};
+
+#ifdef WLAN_FEATURE_OFFLOAD_PACKETS
+/**
+ * enum wlan_offloaded_packets_control - control commands
+ * @WLAN_START_OFFLOADED_PACKETS: start offloaded packets
+ * @WLAN_STOP_OFFLOADED_PACKETS: stop offloaded packets
+ *
+ */
+enum wlan_offloaded_packets_control {
+ WLAN_START_OFFLOADED_PACKETS = 1,
+ WLAN_STOP_OFFLOADED_PACKETS = 2
+};
+
+/**
+ * enum qca_wlan_vendor_attr_offloaded_packets - offloaded packets
+ * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_INVALID: invalid
+ * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SENDING_CONTROL: control
+ * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_REQUEST_ID: request id
+ * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_IP_PACKET_DATA: ip packet data
+ * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SRC_MAC_ADDR: src mac address
+ * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_DST_MAC_ADDR: destination mac address
+ * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_PERIOD: period in milli seconds
+ * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_AFTER_LAST: after last
+ * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_MAX: max
+ */
+enum qca_wlan_vendor_attr_offloaded_packets {
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SENDING_CONTROL,
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_REQUEST_ID,
+
+ /* Packet in hex format */
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_IP_PACKET_DATA,
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SRC_MAC_ADDR,
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_DST_MAC_ADDR,
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_PERIOD,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_MAX =
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_AFTER_LAST - 1,
+};
+#endif
+
+/**
+ * enum qca_wlan_rssi_monitoring_control - rssi control commands
+ * @QCA_WLAN_RSSI_MONITORING_CONTROL_INVALID: invalid
+ * @QCA_WLAN_RSSI_MONITORING_START: rssi monitoring start
+ * @QCA_WLAN_RSSI_MONITORING_STOP: rssi monitoring stop
+ */
+enum qca_wlan_rssi_monitoring_control {
+ QCA_WLAN_RSSI_MONITORING_CONTROL_INVALID = 0,
+ QCA_WLAN_RSSI_MONITORING_START,
+ QCA_WLAN_RSSI_MONITORING_STOP,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_rssi_monitoring - rssi monitoring
+ * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_INVALID: Invalid
+ * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CONTROL: control
+ * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MAX_RSSI: max rssi
+ * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MIN_RSSI: min rssi
+ * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CUR_BSSID: current bssid
+ * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CUR_RSSI: current rssi
+ * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_AFTER_LAST: after last
+ * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MAX: max
+ */
+enum qca_wlan_vendor_attr_rssi_monitoring {
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_INVALID = 0,
+
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CONTROL,
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_REQUEST_ID,
+
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MAX_RSSI,
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MIN_RSSI,
+
+ /* attributes to be used/received in callback */
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CUR_BSSID,
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CUR_RSSI,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MAX =
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_AFTER_LAST - 1,
+};
+
+/**
+ * qca_wlan_vendor_external_acs_event_chan_info_attr: Represents per channel
+ * information. These attributes are sent as part of
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO. Each set of the following
+ * attributes correspond to a single channel.
+ * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS: A bitmask (u16)
+ * with flags specified in qca_wlan_vendor_channel_prop_flags_ext.
+ * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT: A bitmask (u16)
+ * with flags specified in qca_wlan_vendor_channel_prop_flags_ext.
+ * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ: frequency
+ * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_REG_POWER: maximum
+ * regulatory transmission power
+ * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_POWER: maximum
+ * transmission power
+ * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MIN_POWER: minimum
+ * transmission power
+ * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_REG_CLASS_ID: regulatory
+ * class id
+ * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_ANTENNA_GAIN: maximum
+ * antenna gain in dbm
+ * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0: vht segment 0
+ * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1: vht segment 1
+ *
+ */
+enum qca_wlan_vendor_external_acs_event_chan_info_attr {
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_INVALID = 0,
+
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS = 1,
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT = 2,
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ = 3,
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_REG_POWER = 4,
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_POWER = 5,
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MIN_POWER = 6,
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_REG_CLASS_ID = 7,
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_ANTENNA_GAIN = 8,
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0 = 9,
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1 = 10,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST,
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX =
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_start_acs_config: attribute to vendor sub-command
+ * QCA_NL80211_VENDOR_SUBCMD_START_ACS. This will be triggered by host
+ * driver.
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON: This reason refers to
+ * qca_wlan_vendor_acs_select_reason. This helps acs module to understand why
+ * ACS need to be started
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_SPECTRAL_SUPPORTED: Does
+ * driver supports spectral scanning or not
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_OFFLOAD_ENABLED: Is 11ac is
+ * offloaded to firmware.
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_ADD_CHAN_STATS_SUPPORT: Does driver
+ * provides additional channel capability as part of scan operation.
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_SAP_MODE: Operating mode of
+ * interface. It takes one of nl80211_iftype values.
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_SAP_STATUS: Iface status: UP/Down
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_WIDTH: This is the upper bound
+ * of chan width. ACS logic should try to get a channel with specified width
+ * if not found then look for lower values.
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_MAC_ADDR: Interface MAC address.
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_BAND: nl80211_bands
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PHY_MODE: PHY/HW mode such as
+ * a/b/g/n/ac.
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHANLIST: Supported channel list
+ * among which ACS should choose best channel.
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL:Preferred Chan List by the
+ * driver which will have <channel(u8), weight(u8)> format as array of
+ * nested values.
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO: Array of nested attribute
+ * for each channel. It takes attr as defined in
+ * qca_wlan_vendor_start_acs_config_chan_info_attr.
+ */
+enum qca_wlan_vendor_attr_start_acs_config {
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON = 1,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_SPECTRAL_SUPPORTED = 2,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_OFFLOAD_ENABLED = 3,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_ADD_CHAN_STATS_SUPPORT = 4,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_SAP_MODE = 5,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_SAP_STATUS = 6,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_WIDTH = 7,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_MAC_ADDR = 8,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_BAND = 9,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PHY_MODE = 10,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHANLIST = 11,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL = 12,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO = 13,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_MAX =
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_pcl_config: attribute to vendor sub-command
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL.
+ * @QCA_WLAN_VENDOR_ATTR_PCL_CONFIG_INVALID: invalid value
+ * @QCA_WLAN_VENDOR_ATTR_PCL_CONFIG_CHANNEL: pcl channel number
+ * @QCA_WLAN_VENDOR_ATTR_PCL_CONFIG_WEIGHT: pcl channel weight
+ */
+enum qca_wlan_vendor_attr_pcl_config {
+ QCA_WLAN_VENDOR_ATTR_PCL_CONFIG_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_PCL_CONFIG_CHANNEL = 1,
+ QCA_WLAN_VENDOR_ATTR_PCL_CONFIG_WEIGHT = 2,
+};
+
+/**
+ * enum set_reset_packet_filter - set packet filter control commands
+ * @QCA_WLAN_SET_PACKET_FILTER: Set Packet Filter
+ * @QCA_WLAN_GET_PACKET_FILTER: Get Packet filter
+ */
+enum set_reset_packet_filter {
+ QCA_WLAN_SET_PACKET_FILTER = 1,
+ QCA_WLAN_GET_PACKET_FILTER = 2,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_packet_filter - BPF control commands
+ * @QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_INVALID: Invalid
+ * @QCA_WLAN_VENDOR_ATTR_SET_RESET_PACKET_FILTER: Filter ID
+ * @QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_VERSION: Filter Version
+ * @QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_SIZE: Total Length
+ * @QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_CURRENT_OFFSET: Current offset
+ * @QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROGRAM: length of BPF instructions
+ */
+enum qca_wlan_vendor_attr_packet_filter {
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_SET_RESET_PACKET_FILTER,
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_VERSION,
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_ID,
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_SIZE,
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_CURRENT_OFFSET,
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROGRAM,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_MAX =
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_wake_stats - wake lock stats
+ * @QCA_WLAN_VENDOR_ATTR_GET_WAKE_STATS_INVALID: invalid
+ * @QCA_WLAN_VENDOR_ATTR_TOTAL_CMD_EVENT_WAKE:
+ * @QCA_WLAN_VENDOR_ATTR_CMD_EVENT_WAKE_CNT_PTR:
+ * @QCA_WLAN_VENDOR_ATTR_CMD_EVENT_WAKE_CNT_SZ:
+ * @QCA_WLAN_VENDOR_ATTR_TOTAL_DRIVER_FW_LOCAL_WAKE:
+ * @QCA_WLAN_VENDOR_ATTR_DRIVER_FW_LOCAL_WAKE_CNT_PTR:
+ * @QCA_WLAN_VENDOR_ATTR_DRIVER_FW_LOCAL_WAKE_CNT_SZ:
+ * @QCA_WLAN_VENDOR_ATTR_TOTAL_RX_DATA_WAKE:
+ * total rx wakeup count
+ * @QCA_WLAN_VENDOR_ATTR_RX_UNICAST_CNT:
+ * Total rx unicast packet which woke up host
+ * @QCA_WLAN_VENDOR_ATTR_RX_MULTICAST_CNT:
+ * Total rx multicast packet which woke up host
+ * @QCA_WLAN_VENDOR_ATTR_RX_BROADCAST_CNT:
+ * Total rx broadcast packet which woke up host
+ * @QCA_WLAN_VENDOR_ATTR_ICMP_PKT:
+ * wake icmp packet count
+ * @QCA_WLAN_VENDOR_ATTR_ICMP6_PKT:
+ * wake icmp6 packet count
+ * @QCA_WLAN_VENDOR_ATTR_ICMP6_RA:
+ * wake icmp6 RA packet count
+ * @QCA_WLAN_VENDOR_ATTR_ICMP6_NA:
+ * wake icmp6 NA packet count
+ * @QCA_WLAN_VENDOR_ATTR_ICMP6_NS:
+ * wake icmp6 NS packet count
+ * @QCA_WLAN_VENDOR_ATTR_ICMP4_RX_MULTICAST_CNT:
+ * Rx wake packet count due to ipv4 multicast
+ * @QCA_WLAN_VENDOR_ATTR_ICMP6_RX_MULTICAST_CNT:
+ * Rx wake packet count due to ipv6 multicast
+ * @QCA_WLAN_VENDOR_ATTR_OTHER_RX_MULTICAST_CNT:
+ * Rx wake packet count due to non-ipv4 and non-ipv6 packets
+ * @QCA_WLAN_VENDOR_ATTR_RSSI_BREACH_CNT:
+ * wake rssi breach packet count
+ * @QCA_WLAN_VENDOR_ATTR_LOW_RSSI_CNT:
+ * wake low rssi packet count
+ * @QCA_WLAN_VENDOR_ATTR_GSCAN_CNT:
+ * wake gscan packet count
+ * @QCA_WLAN_VENDOR_ATTR_PNO_COMPLETE_CNT:
+ * wake pno complete packet count
+ * @QCA_WLAN_VENDOR_ATTR_PNO_MATCH_CNT:
+ * wake pno match packet count
+ */
+enum qca_wlan_vendor_attr_wake_stats {
+ QCA_WLAN_VENDOR_ATTR_GET_WAKE_STATS_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TOTAL_CMD_EVENT_WAKE,
+ QCA_WLAN_VENDOR_ATTR_CMD_EVENT_WAKE_CNT_PTR,
+ QCA_WLAN_VENDOR_ATTR_CMD_EVENT_WAKE_CNT_SZ,
+ QCA_WLAN_VENDOR_ATTR_TOTAL_DRIVER_FW_LOCAL_WAKE,
+ QCA_WLAN_VENDOR_ATTR_DRIVER_FW_LOCAL_WAKE_CNT_PTR,
+ QCA_WLAN_VENDOR_ATTR_DRIVER_FW_LOCAL_WAKE_CNT_SZ,
+ QCA_WLAN_VENDOR_ATTR_TOTAL_RX_DATA_WAKE,
+ QCA_WLAN_VENDOR_ATTR_RX_UNICAST_CNT,
+ QCA_WLAN_VENDOR_ATTR_RX_MULTICAST_CNT,
+ QCA_WLAN_VENDOR_ATTR_RX_BROADCAST_CNT,
+ QCA_WLAN_VENDOR_ATTR_ICMP_PKT,
+ QCA_WLAN_VENDOR_ATTR_ICMP6_PKT,
+ QCA_WLAN_VENDOR_ATTR_ICMP6_RA,
+ QCA_WLAN_VENDOR_ATTR_ICMP6_NA,
+ QCA_WLAN_VENDOR_ATTR_ICMP6_NS,
+ QCA_WLAN_VENDOR_ATTR_ICMP4_RX_MULTICAST_CNT,
+ QCA_WLAN_VENDOR_ATTR_ICMP6_RX_MULTICAST_CNT,
+ QCA_WLAN_VENDOR_ATTR_OTHER_RX_MULTICAST_CNT,
+ QCA_WLAN_VENDOR_ATTR_RSSI_BREACH_CNT,
+ QCA_WLAN_VENDOR_ATTR_LOW_RSSI_CNT,
+ QCA_WLAN_VENDOR_ATTR_GSCAN_CNT,
+ QCA_WLAN_VENDOR_ATTR_PNO_COMPLETE_CNT,
+ QCA_WLAN_VENDOR_ATTR_PNO_MATCH_CNT,
+ /* keep last */
+ QCA_WLAN_VENDOR_GET_WAKE_STATS_AFTER_LAST,
+ QCA_WLAN_VENDOR_GET_WAKE_STATS_MAX =
+ QCA_WLAN_VENDOR_GET_WAKE_STATS_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_vendor_attr_get_tsf: Vendor attributes for TSF capture
+ * @QCA_WLAN_VENDOR_ATTR_TSF_INVALID: Invalid attribute value
+ * @QCA_WLAN_VENDOR_ATTR_TSF_CMD: enum qca_tsf_operation (u32)
+ * @QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE: Unsigned 64 bit TSF timer value
+ * @QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE: Unsigned 64 bit Synchronized
+ * SOC timer value at TSF capture
+ * @QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST: after last
+ * @QCA_WLAN_VENDOR_ATTR_TSF_MAX: Max value
+ */
+enum qca_vendor_attr_tsf_cmd {
+ QCA_WLAN_VENDOR_ATTR_TSF_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TSF_CMD,
+ QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE,
+ QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE,
+ QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TSF_MAX =
+ QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_tsf_operation: TSF driver commands
+ * @QCA_TSF_CAPTURE: Initiate TSF Capture
+ * @QCA_TSF_GET: Get TSF capture value
+ * @QCA_TSF_SYNC_GET: Initiate TSF capture and return with captured value
+ */
+enum qca_tsf_cmd {
+ QCA_TSF_CAPTURE,
+ QCA_TSF_GET,
+ QCA_TSF_SYNC_GET,
+};
+
+/**
+ * enum qca_vendor_attr_get_preferred_freq_list - get preferred channel list
+ * @QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_INVALID: invalid value
+ * @QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_IFACE_TYPE: interface type
+ * @QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST: preferred frequency list
+ * @QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST: after last
+ * @QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_MAX: max
+ */
+enum qca_vendor_attr_get_preferred_freq_list {
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_INVALID,
+ /* A 32-unsigned value; the interface type/mode for which the preferred
+ * frequency list is requested (see enum qca_iface_type for possible
+ * values); used in both south- and north-bound.
+ */
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_IFACE_TYPE,
+ /* An array of 32-unsigned values; values are frequency (MHz); used
+ * in north-bound only.
+ */
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_MAX =
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_vendor_attr_probable_oper_channel - channel hint
+ * @QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_INVALID: invalid value
+ * @QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_IFACE_TYPE: interface type
+ * @QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_FREQ: frequency hint value
+ * @QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST: last
+ * @QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_MAX: max
+ */
+enum qca_vendor_attr_probable_oper_channel {
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_INVALID,
+ /* 32-bit unsigned value; indicates the connection/iface type likely to
+ * come on this channel (see enum qca_iface_type).
+ */
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_IFACE_TYPE,
+ /* 32-bit unsigned value; the frequency (MHz) of the probable channel */
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_FREQ,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_MAX =
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_gw_param_config - gateway param config
+ * @QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_INVALID: Invalid
+ * @QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_GW_MAC_ADDR: gateway mac addr
+ * @QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_IPV4_ADDR: ipv4 addr
+ * @QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_IPV6_ADDR: ipv6 addr
+ */
+enum qca_wlan_vendor_attr_gw_param_config {
+ QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_GW_MAC_ADDR,
+ QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_IPV4_ADDR,
+ QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_IPV6_ADDR,
+ QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_MAX =
+ QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_AFTER_LAST - 1,
+};
+
+/**
+ * enum drv_dbs_capability - DBS capability
+ * @DRV_DBS_CAPABILITY_DISABLED: DBS disabled
+ * @DRV_DBS_CAPABILITY_1X1: 1x1
+ * @DRV_DBS_CAPABILITY_2X2: 2x2
+ */
+enum drv_dbs_capability {
+ DRV_DBS_CAPABILITY_DISABLED, /* not supported or disabled */
+ DRV_DBS_CAPABILITY_1X1,
+ DRV_DBS_CAPABILITY_2X2,
+};
+
+/**
+ * enum qca_vendor_attr_ota_test - Enable OTA test
+ * @QCA_WLAN_VENDOR_ATTR_OTA_TEST_INVALID: invalid value
+ * @QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE: enable OTA test
+ * @QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST: after last
+ * @QCA_WLAN_VENDOR_ATTR_OTA_TEST_MAX: max
+ */
+enum qca_vendor_attr_ota_test {
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_INVALID,
+ /* 8-bit unsigned value to indicate if OTA test is enabled */
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_MAX =
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST - 1
+};
+
+/** enum qca_vendor_attr_txpower_scale - vendor sub commands index
+ * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_INVALID: invalid value
+ * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE: scaling value
+ * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST: last value
+ * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_MAX: max value
+ */
+enum qca_vendor_attr_txpower_scale {
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_INVALID,
+ /* 8-bit unsigned value to indicate the scaling of tx power */
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_MAX =
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_vendor_attr_txpower_scale_decr_db - vendor sub commands index
+ * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_INVALID: invalid value
+ * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB: scaling value
+ * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_AFTER_LAST: last value
+ * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_MAX: max value
+ */
+enum qca_vendor_attr_txpower_scale_decr_db {
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_INVALID,
+ /* 8-bit unsigned value to indicate the scaling of tx power */
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_MAX =
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_AFTER_LAST - 1
+};
+
+/**
+ * enum dfs_mode - state of DFS mode
+ * @DFS_MODE_NONE: DFS mode attribute is none
+ * @DFS_MODE_ENABLE: DFS mode is enabled
+ * @DFS_MODE_DISABLE: DFS mode is disabled
+ * @DFS_MODE_DEPRIORITIZE: Deprioritize DFS channels in scanning
+ */
+enum dfs_mode {
+ DFS_MODE_NONE,
+ DFS_MODE_ENABLE,
+ DFS_MODE_DISABLE,
+ DFS_MODE_DEPRIORITIZE
+};
+
+/**
+ * enum qca_wlan_vendor_attr_acs_config - Config params for ACS
+ * @QCA_WLAN_VENDOR_ATTR_ACS_MODE_INVALID: Invalid
+ * @QCA_WLAN_VENDOR_ATTR_ACS_DFS_MODE: Dfs mode for ACS
+ * QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_HINT: channel_hint for ACS
+ * QCA_WLAN_VENDOR_ATTR_ACS_DFS_AFTER_LAST: after_last
+ * QCA_WLAN_VENDOR_ATTR_ACS_DFS_MAX: max attribute
+ */
+enum qca_wlan_vendor_attr_acs_config {
+ QCA_WLAN_VENDOR_ATTR_ACS_MODE_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_ACS_DFS_MODE,
+ QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_HINT,
+
+ QCA_WLAN_VENDOR_ATTR_ACS_DFS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ACS_DFS_MAX =
+ QCA_WLAN_VENDOR_ATTR_ACS_DFS_AFTER_LAST - 1,
+
+};
+
+/**
+ * enum qca_wlan_vendor_attr_sta_connect_roam_policy_config -
+ * config params for sta roam policy
+ * @QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_INVALID: Invalid
+ * @QCA_WLAN_VENDOR_ATTR_STA_DFS_MODE: If sta should skip Dfs channels
+ * @QCA_WLAN_VENDOR_ATTR_STA_SKIP_UNSAFE_CHANNEL:
+ * If sta should skip unsafe channels or not in scanning
+ * @QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_LAST:
+ * @QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_MAX: max attribute
+ */
+enum qca_wlan_vendor_attr_sta_connect_roam_policy_config {
+ QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_STA_DFS_MODE,
+ QCA_WLAN_VENDOR_ATTR_STA_SKIP_UNSAFE_CHANNEL,
+
+ QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_MAX =
+ QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_AFTER_LAST - 1,
+};
+
+
+/**
+ * enum qca_wlan_vendor_attr_sap_config - config params for sap configuration
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_INVALID: invalid
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL: Channel on which SAP should start
+ * @QCA_WLAN_VENDOR_ATTR_SAP_MANDATORY_FREQUENCY_LIST: List of frequencies on
+ * which AP is expected to operate. This is irrespective of ACS configuration.
+ * This list is a priority based one and is looked for before the AP is created
+ * to ensure the best concurrency sessions (avoid MCC and use DBS/SCC) co-exist
+ * in the system.
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST: after last
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_MAX: max attribute
+ */
+enum qca_wlan_vendor_attr_sap_config {
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL,
+ QCA_WLAN_VENDOR_ATTR_SAP_MANDATORY_FREQUENCY_LIST = 2,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_MAX =
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_p2p_listen_offload - vendor sub commands index
+ * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INVALID: invalid value
+ * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CHANNEL:
+ * A 32-bit unsigned value; the P2P listen frequency (MHz); must be one
+ * of the social channels.
+ * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_PERIOD: listen offload period
+ * A 32-bit unsigned value; the P2P listen offload period (ms).
+ * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INTERVAL:
+ * A 32-bit unsigned value; the P2P listen interval duration (ms).
+ * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_COUNT:
+ * A 32-bit unsigned value; number of interval times the Firmware needs
+ * to run the offloaded P2P listen operation before it stops.
+ * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_DEVICE_TYPES: device types
+ * An array of unsigned 8-bit characters; vendor information elements.
+ * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_VENDOR_IE: vendor IEs
+ * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CTRL_FLAG: control flag for FW
+ * A 32-bit unsigned value; a control flag to indicate whether listen
+ * results need to be flushed to wpa_supplicant.
+ * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_STOP_REASON: offload stop reason
+ * A 8-bit unsigned value; reason code for P2P listen offload stop
+ * event.
+ * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST: last value
+ * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_MAX: max value
+ */
+enum qca_wlan_vendor_attr_p2p_listen_offload {
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CHANNEL,
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_PERIOD,
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INTERVAL,
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_COUNT,
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_DEVICE_TYPES,
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_VENDOR_IE,
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CTRL_FLAG,
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_STOP_REASON,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_MAX =
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_drv_info - WLAN driver info
+ * @QCA_WLAN_VENDOR_ATTR_DRV_INFO_INVALID: Invalid
+ * @QCA_WLAN_VENDOR_ATTR_DRV_INFO_BUS_SIZE: Maximum Message size info
+ * between Firmware & Host.
+ */
+enum qca_wlan_vendor_drv_info {
+ QCA_WLAN_VENDOR_ATTR_DRV_INFO_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_DRV_INFO_BUS_SIZE,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_DRV_INFO_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_DRV_INFO_MAX =
+ QCA_WLAN_VENDOR_ATTR_DRV_INFO_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_encryption_test - Attributes to
+ * validate encryption engine
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_NEEDS_DECRYPTION: Flag attribute.
+ * This will be included if the request is for decryption; if not included,
+ * the request is treated as a request for encryption by default.
+ * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_CIPHER: Unsigned 32-bit value
+ * indicating the key cipher suite. Takes same values as
+ * NL80211_ATTR_KEY_CIPHER.
+ * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_KEYID: Unsigned 8-bit value
+ * Key Id to be used for encryption
+ * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_TK: Array of 8-bit values.
+ * Key (TK) to be used for encryption/decryption
+ * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_PN: Array of 8-bit values.
+ * Packet number to be specified for encryption/decryption
+ * 6 bytes for TKIP/CCMP/GCMP.
+ * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_DATA: Array of 8-bit values
+ * representing the 802.11 packet (header + payload + FCS) that
+ * needs to be encrypted/decrypted.
+ * Encrypted/decrypted response from the driver will also be sent
+ * to userspace with the same attribute.
+ */
+enum qca_wlan_vendor_attr_encryption_test {
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_NEEDS_DECRYPTION,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_CIPHER,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_KEYID,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_TK,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_PN,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_DATA,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_MAX =
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_tdls_configuration - Attributes for
+ * @QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS configuration to the host driver.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE: Configure the TDLS trigger
+ * mode in the host driver. enum qca_wlan_vendor_tdls_trigger_mode
+ * represents the different TDLS trigger modes.
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD: Duration (u32) within
+ * which QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD number
+ * of packets shall meet the criteria for implicit TDLS setup.
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD: Number (u32) of Tx/Rx
+ * packets within a duration.
+ * QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD to initiate
+ * a TDLS setup.
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_DISCOVERY_PERIOD: Time (u32) to inititate
+ * a TDLS Discovery to the Peer.
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX_DISCOVERY_ATTEMPT: Max number (u32) of
+ * discovery attempts to know the TDLS capability of the peer. A peer is
+ * marked as TDLS not capable if there is no response for all the attempts.
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT: Represents a duration (u32)
+ * within which QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD
+ * number of TX / RX frames meet the criteria for TDLS teardown.
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD: Minumum number
+ * (u32) of Tx/Rx packets within a duration
+ * CA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT to tear down a TDLS link
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_SETUP_RSSI_THRESHOLD: Threshold
+ * corresponding to the RSSI of the peer below which a TDLS
+ * setup is triggered.
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TEARDOWN_RSSI_THRESHOLD: Threshold
+ * corresponding to the RSSI of the peer above which
+ * a TDLS teardown is triggered.
+ */
+enum qca_wlan_vendor_attr_tdls_configuration {
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE = 1,
+
+ /* Attributes configuring the TDLS Implicit Trigger */
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD = 2,
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD = 3,
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_DISCOVERY_PERIOD = 4,
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX_DISCOVERY_ATTEMPT = 5,
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT = 6,
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD = 7,
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_SETUP_RSSI_THRESHOLD = 8,
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TEARDOWN_RSSI_THRESHOLD = 9,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX =
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_tdls_trigger_mode: Represents the TDLS trigger mode in
+ * the driver.
+ *
+ * The following are the different values for
+ * QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE.
+ *
+ * @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXPLICIT: The trigger to
+ * initiate/teardown the TDLS connection to a respective peer comes
+ * from the user space. wpa_supplicant provides the commands
+ * TDLS_SETUP, TDLS_TEARDOWN, TDLS_DISCOVER to do this.
+ * @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_IMPLICIT: Host driver triggers this TDLS
+ * setup/teardown to the eligible peer once the configured criteria
+ * (such as TX/RX threshold, RSSI) is met. The attributes
+ * in QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IMPLICIT_PARAMS correspond to
+ * the different configuration criteria for the TDLS trigger from the
+ * host driver.
+ * @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXTERNAL: Enables the driver to trigger
+ * the TDLS setup / teardown through the implicit mode, only to the
+ * configured MAC addresses(wpa_supplicant, with tdls_external_control = 1,
+ * configures the MAC address through TDLS_SETUP/TDLS_TEARDOWN commands).
+ * External mode works on top of the implicit mode, thus the host Driver
+ * is expected to be configured in TDLS Implicit mode too to operate in
+ * External mode. Configuring External mode alone without Implicit
+ * mode is invalid.
+ *
+ * All the above implementations work as expected only when the host driver
+ * advertises the capability WPA_DRIVER_FLAGS_TDLS_EXTERNAL_SETUP -
+ * representing that the TDLS message exchange is not internal to the host
+ * driver, but depends on wpa_supplicant to do the message exchange.
+ */
+enum qca_wlan_vendor_tdls_trigger_mode {
+ QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXPLICIT = 1 << 0,
+ QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_IMPLICIT = 1 << 1,
+ QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXTERNAL = 1 << 2,
+};
+
+/**
+ * enum qca_vendor_attr_sar_limits_selections - Source of SAR power limits
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF0: Select SAR profile #0
+ * that is hard-coded in the Board Data File (BDF).
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF1: Select SAR profile #1
+ * that is hard-coded in the Board Data File (BDF).
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF2: Select SAR profile #2
+ * that is hard-coded in the Board Data File (BDF).
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF3: Select SAR profile #3
+ * that is hard-coded in the Board Data File (BDF).
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF4: Select SAR profile #4
+ * that is hard-coded in the Board Data File (BDF).
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_NONE: Do not select any
+ * source of SAR power limits, thereby disabling the SAR power
+ * limit feature.
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER: Select the SAR power
+ * limits configured by %QCA_NL80211_VENDOR_SUBCMD_SET_SAR.
+ *
+ * This enumerates the valid set of values that may be supplied for
+ * attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT in an instance of
+ * the %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS vendor command.
+ */
+enum qca_vendor_attr_sar_limits_selections {
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF0 = 0,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF1 = 1,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF2 = 2,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF3 = 3,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF4 = 4,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_NONE = 5,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER = 6,
+};
+
+/**
+ * enum qca_vendor_attr_sar_limits_spec_modulations -
+ * SAR limits specification modulation
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_CCK -
+ * CCK modulation
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_OFDM -
+ * OFDM modulation
+ *
+ * This enumerates the valid set of values that may be supplied for
+ * attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION in an
+ * instance of attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC in an
+ * instance of the %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS vendor
+ * command.
+ */
+enum qca_vendor_attr_sar_limits_spec_modulations {
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_CCK = 0,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_OFDM = 1,
+};
+
+/**
+ * enum qca_vendor_attr_sar_limits - Attributes for SAR power limits
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE: Optional (u32) value to
+ * select which SAR power limit table should be used. Valid
+ * values are enumerated in enum
+ * %qca_vendor_attr_sar_limits_selections. The existing SAR
+ * power limit selection is unchanged if this attribute is not
+ * present.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS: Optional (u32) value
+ * which specifies the number of SAR power limit specifications
+ * which will follow.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC: Nested array of SAR power
+ * limit specifications. The number of specifications is
+ * specified by @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS. Each
+ * specification contains a set of
+ * QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_* attributes. A
+ * specification is uniquely identified by the attributes
+ * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND,
+ * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN, and
+ * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION and always
+ * contains as a payload the attribute
+ * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND: Optional (u32) value to
+ * indicate for which band this specification applies. Valid
+ * values are enumerated in enum %nl80211_band (although not all
+ * bands may be supported by a given device). If the attribute is
+ * not supplied then the specification will be applied to all
+ * supported bands.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN: Optional (u32) value
+ * to indicate for which antenna chain this specification
+ * applies, i.e. 1 for chain 1, 2 for chain 2, etc. If the
+ * attribute is not supplied then the specification will be
+ * applied to all chains.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION: Optional (u32)
+ * value to indicate for which modulation scheme this
+ * specification applies. Valid values are enumerated in enum
+ * %qca_vendor_attr_sar_limits_spec_modulations. If the attribute
+ * is not supplied then the specification will be applied to all
+ * modulation schemes.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT: Required (u32)
+ * value to specify the actual power limit value in steps of 0.5
+ * dbm.
+ *
+ * These attributes are used with %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS.
+ */
+enum qca_vendor_attr_sar_limits {
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE = 1,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS = 2,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC = 3,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND = 4,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN = 5,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION = 6,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT = 7,
+
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_MAX =
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_AFTER_LAST - 1
+};
+
+/**
+ * qca_wlan_vendor_attr_external_acs_channels: attribute to vendor subcmd
+ * QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This carry a list of channels
+ * in priority order as decided after acs operation in userspace.
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON: One of reason code from
+ * qca_wlan_vendor_acs_select_reason.
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_COUNT: Number of channels in
+ * this list
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST: Array of nested values
+ * for each channel with following attributes:
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY: Primary channel (u8)
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY: Secondary channel (u8)
+ * required only for 160 / 80 + 80
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0: VHT seg0 channel (u8)
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1: VHT seg1 channel (u8)
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH:channel width (u8)
+ */
+enum qca_wlan_vendor_attr_external_acs_channels {
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_INVALID = 0,
+
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON = 1,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_COUNT = 2,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST = 3,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY = 4,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY = 5,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0 = 6,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1 = 7,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH = 8,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_MAX =
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST - 1
+};
+
+/**
+ * qca_wlan_vendor_acs_select_reason: This represents the different reasons why
+ * the ACS has to be triggered. These parameters are used by
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON and
+ * QCA_NL80211_VENDOR_SUBCMD_ACS_SET_CHANNELS
+ * @QCA_WLAN_VENDOR_ACS_SELECT_REASON_INIT: Represents the reason that the
+ * ACS triggered during the AP start
+ * @QCA_WLAN_VENDOR_ACS_SELECT_REASON_DFS: Represents the reason that
+ * DFS found with current channel
+ * @QCA_WLAN_VENDOR_ACS_SELECT_REASON_LTE_COEX: Represents the reason that
+ * LTE CO-Exist in current band
+ */
+enum qca_wlan_vendor_acs_select_reason {
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_INIT,
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_DFS,
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_LTE_COEX,
+};
+#if !(defined (SUPPORT_WDEV_CFG80211_VENDOR_EVENT_ALLOC)) && \
+ (LINUX_VERSION_CODE < KERNEL_VERSION(4, 1, 0)) && \
+ !(defined(WITH_BACKPORTS))
+
+static inline struct sk_buff *
+backported_cfg80211_vendor_event_alloc(struct wiphy *wiphy,
+ struct wireless_dev *wdev,
+ int approxlen,
+ int event_idx, gfp_t gfp)
+{
+ struct sk_buff *skb;
+
+ skb = cfg80211_vendor_event_alloc(wiphy, approxlen, event_idx, gfp);
+
+ if (skb && wdev) {
+ struct nlattr *attr;
+ u32 ifindex = wdev->netdev->ifindex;
+
+ nla_nest_cancel(skb, ((void **)skb->cb)[2]);
+ if (nla_put_u32(skb, NL80211_ATTR_IFINDEX, ifindex))
+ goto nla_fail;
+
+ attr = nla_nest_start(skb, NL80211_ATTR_VENDOR_DATA);
+ ((void **)skb->cb)[2] = attr;
+ }
+
+ return skb;
+
+nla_fail:
+ kfree_skb(skb);
+
+ return NULL;
+}
+#define cfg80211_vendor_event_alloc backported_cfg80211_vendor_event_alloc
+#endif
+
+#endif