wmi/src/wmi_unified.c

/*
 * Copyright (c) 2015-2016 The Linux Foundation. All rights reserved.
 *
 * Previously licensed under the ISC license by Qualcomm Atheros, Inc.
 *
 *
 * Permission to use, copy, modify, and/or distribute this software for
 * any purpose with or without fee is hereby granted, provided that the
 * above copyright notice and this permission notice appear in all
 * copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
 * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
 * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
 * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
 * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 * PERFORMANCE OF THIS SOFTWARE.
 */

/*
 * This file was originally distributed by Qualcomm Atheros, Inc.
 * under proprietary terms before Copyright ownership was assigned
 * to the Linux Foundation.
 */

/*
 * Host WMI unified implementation
 */
#include "athdefs.h"
#include "osapi_linux.h"
#include "a_types.h"
#include "a_debug.h"
#include "ol_if_athvar.h"
#include "ol_defines.h"
#ifndef WMI_NON_TLV_SUPPORT
#include "ol_fw.h"
#endif
#include "htc_api.h"
#include "htc_api.h"
#include "dbglog_host.h"
#include "wmi.h"
#include "wmi_unified_priv.h"
#include "wmi_unified_param.h"

#define WMI_MIN_HEAD_ROOM 64

#ifdef WMI_INTERFACE_EVENT_LOGGING
/* WMI commands */
uint32_t g_wmi_command_buf_idx = 0;
struct wmi_command_debug wmi_command_log_buffer[WMI_EVENT_DEBUG_MAX_ENTRY];

/* WMI commands TX completed */
uint32_t g_wmi_command_tx_cmp_buf_idx = 0;
struct wmi_command_debug
	wmi_command_tx_cmp_log_buffer[WMI_EVENT_DEBUG_MAX_ENTRY];

/* WMI events when processed */
uint32_t g_wmi_event_buf_idx = 0;
struct wmi_event_debug wmi_event_log_buffer[WMI_EVENT_DEBUG_MAX_ENTRY];

/* WMI events when queued */
uint32_t g_wmi_rx_event_buf_idx = 0;
struct wmi_event_debug wmi_rx_event_log_buffer[WMI_EVENT_DEBUG_MAX_ENTRY];

#define WMI_COMMAND_RECORD(a, b) {					\
	if (WMI_EVENT_DEBUG_MAX_ENTRY <= g_wmi_command_buf_idx)		\
		g_wmi_command_buf_idx = 0;				\
	wmi_command_log_buffer[g_wmi_command_buf_idx].command = a;	\
	qdf_mem_copy(wmi_command_log_buffer[g_wmi_command_buf_idx].data, b, 16); \
	wmi_command_log_buffer[g_wmi_command_buf_idx].time =		\
		qdf_get_log_timestamp();				\
	g_wmi_command_buf_idx++;					\
}

#define WMI_COMMAND_TX_CMP_RECORD(a, b) {				\
	if (WMI_EVENT_DEBUG_MAX_ENTRY <= g_wmi_command_tx_cmp_buf_idx)	\
		g_wmi_command_tx_cmp_buf_idx = 0;			\
	wmi_command_tx_cmp_log_buffer[g_wmi_command_tx_cmp_buf_idx].command = a; \
	qdf_mem_copy(wmi_command_tx_cmp_log_buffer			\
	     [g_wmi_command_tx_cmp_buf_idx].data, b, 16);	     \
	wmi_command_tx_cmp_log_buffer[g_wmi_command_tx_cmp_buf_idx].time = \
		qdf_get_log_timestamp();				\
	g_wmi_command_tx_cmp_buf_idx++;					\
}

#define WMI_EVENT_RECORD(a, b) {					\
	if (WMI_EVENT_DEBUG_MAX_ENTRY <= g_wmi_event_buf_idx)		\
		g_wmi_event_buf_idx = 0;				\
	wmi_event_log_buffer[g_wmi_event_buf_idx].event = a;		\
	qdf_mem_copy(wmi_event_log_buffer[g_wmi_event_buf_idx].data, b, 16); \
	wmi_event_log_buffer[g_wmi_event_buf_idx].time =		\
		qdf_get_log_timestamp();				\
	g_wmi_event_buf_idx++;						\
}

#define WMI_RX_EVENT_RECORD(a, b) {					\
	if (WMI_EVENT_DEBUG_MAX_ENTRY <= g_wmi_rx_event_buf_idx)	\
		g_wmi_rx_event_buf_idx = 0;				\
	wmi_rx_event_log_buffer[g_wmi_rx_event_buf_idx].event = a;	\
	qdf_mem_copy(wmi_rx_event_log_buffer[g_wmi_rx_event_buf_idx].data, b, 16); \
	wmi_rx_event_log_buffer[g_wmi_rx_event_buf_idx].time =		\
		qdf_get_log_timestamp();				\
	g_wmi_rx_event_buf_idx++;					\
}
/* wmi_mgmt commands */
#define WMI_MGMT_EVENT_DEBUG_MAX_ENTRY (256)

uint32_t g_wmi_mgmt_command_buf_idx = 0;
struct
wmi_command_debug wmi_mgmt_command_log_buffer[WMI_MGMT_EVENT_DEBUG_MAX_ENTRY];

/* wmi_mgmt commands TX completed */
uint32_t g_wmi_mgmt_command_tx_cmp_buf_idx = 0;
struct wmi_command_debug
wmi_mgmt_command_tx_cmp_log_buffer[WMI_MGMT_EVENT_DEBUG_MAX_ENTRY];

/* wmi_mgmt events when processed */
uint32_t g_wmi_mgmt_event_buf_idx = 0;
struct wmi_event_debug
wmi_mgmt_event_log_buffer[WMI_MGMT_EVENT_DEBUG_MAX_ENTRY];

#define WMI_MGMT_COMMAND_RECORD(a, b) {					     \
	if (WMI_MGMT_EVENT_DEBUG_MAX_ENTRY <=				     \
		g_wmi_mgmt_command_buf_idx)				     \
		g_wmi_mgmt_command_buf_idx = 0;				     \
	wmi_mgmt_command_log_buffer[g_wmi_mgmt_command_buf_idx].command = a; \
	qdf_mem_copy(							     \
		wmi_mgmt_command_log_buffer[g_wmi_mgmt_command_buf_idx].data,\
		b, 16);							     \
	wmi_mgmt_command_log_buffer[g_wmi_mgmt_command_buf_idx].time =	     \
		qdf_get_log_timestamp();				     \
	g_wmi_mgmt_command_buf_idx++;					     \
}

#define WMI_MGMT_COMMAND_TX_CMP_RECORD(a, b) {				     \
	if (WMI_MGMT_EVENT_DEBUG_MAX_ENTRY <=				     \
	    g_wmi_mgmt_command_tx_cmp_buf_idx)				     \
		g_wmi_mgmt_command_tx_cmp_buf_idx = 0;			     \
	wmi_mgmt_command_tx_cmp_log_buffer[g_wmi_mgmt_command_tx_cmp_buf_idx].\
								command = a; \
	qdf_mem_copy(wmi_mgmt_command_tx_cmp_log_buffer			     \
		     [g_wmi_mgmt_command_tx_cmp_buf_idx].data, b, 16);	     \
	wmi_mgmt_command_tx_cmp_log_buffer[g_wmi_mgmt_command_tx_cmp_buf_idx].\
									time =\
		qdf_get_log_timestamp();				      \
	g_wmi_mgmt_command_tx_cmp_buf_idx++;				      \
}

#define WMI_MGMT_EVENT_RECORD(a, b) {					      \
	if (WMI_MGMT_EVENT_DEBUG_MAX_ENTRY <= g_wmi_mgmt_event_buf_idx)       \
		g_wmi_mgmt_event_buf_idx = 0;				      \
	wmi_mgmt_event_log_buffer[g_wmi_mgmt_event_buf_idx].event = a;	      \
	qdf_mem_copy(wmi_mgmt_event_log_buffer[g_wmi_mgmt_event_buf_idx].data,\
		     b, 16);						      \
	wmi_mgmt_event_log_buffer[g_wmi_mgmt_event_buf_idx].time =	      \
		qdf_get_log_timestamp();				      \
	g_wmi_mgmt_event_buf_idx++;					      \
}

#endif /*WMI_INTERFACE_EVENT_LOGGING */

int wmi_get_host_credits(wmi_unified_t wmi_handle);
/* WMI buffer APIs */

#ifdef MEMORY_DEBUG
wmi_buf_t
wmi_buf_alloc_debug(wmi_unified_t wmi_handle, uint16_t len, uint8_t *file_name,
			 uint32_t line_num)
{
	wmi_buf_t wmi_buf;

	if (roundup(len + WMI_MIN_HEAD_ROOM, 4) > wmi_handle->max_msg_len) {
		QDF_ASSERT(0);
		return NULL;
	}

	wmi_buf = qdf_nbuf_alloc_debug(NULL,
				       roundup(len + WMI_MIN_HEAD_ROOM, 4),
				       WMI_MIN_HEAD_ROOM, 4, false, file_name,
				       line_num);

	if (!wmi_buf)
		return NULL;

	/* Clear the wmi buffer */
	OS_MEMZERO(qdf_nbuf_data(wmi_buf), len);

	/*
	 * Set the length of the buffer to match the allocation size.
	 */
	qdf_nbuf_set_pktlen(wmi_buf, len);

	return wmi_buf;
}

void wmi_buf_free(wmi_buf_t net_buf)
{
	qdf_nbuf_free(net_buf);
}
#else
wmi_buf_t wmi_buf_alloc(wmi_unified_t wmi_handle, uint16_t len)
{
	wmi_buf_t wmi_buf;

	if (roundup(len + WMI_MIN_HEAD_ROOM, 4) > wmi_handle->max_msg_len) {
		QDF_ASSERT(0);
		return NULL;
	}

	wmi_buf = qdf_nbuf_alloc(NULL, roundup(len + WMI_MIN_HEAD_ROOM, 4),
				WMI_MIN_HEAD_ROOM, 4, false);
	if (!wmi_buf)
		return NULL;

	/* Clear the wmi buffer */
	OS_MEMZERO(qdf_nbuf_data(wmi_buf), len);

	/*
	 * Set the length of the buffer to match the allocation size.
	 */
	qdf_nbuf_set_pktlen(wmi_buf, len);
	return wmi_buf;
}

void wmi_buf_free(wmi_buf_t net_buf)
{
	qdf_nbuf_free(net_buf);
}
#endif

/**
 * wmi_get_max_msg_len() - get maximum WMI message length
 * @wmi_handle: WMI handle.
 *
 * This function returns the maximum WMI message length
 *
 * Return: maximum WMI message length
 */
uint16_t wmi_get_max_msg_len(wmi_unified_t wmi_handle)
{
	return wmi_handle->max_msg_len - WMI_MIN_HEAD_ROOM;
}

#ifndef WMI_NON_TLV_SUPPORT
static uint8_t *get_wmi_cmd_string(WMI_CMD_ID wmi_command)
{
	switch (wmi_command) {
		/* initialize the wlan sub system */
		CASE_RETURN_STRING(WMI_INIT_CMDID);

		/* Scan specific commands */

		/* start scan request to FW  */
		CASE_RETURN_STRING(WMI_START_SCAN_CMDID);
		/* stop scan request to FW  */
		CASE_RETURN_STRING(WMI_STOP_SCAN_CMDID);
		/* full list of channels as defined by the regulatory
		 * that will be used by scanner   */
		CASE_RETURN_STRING(WMI_SCAN_CHAN_LIST_CMDID);
		/* overwrite default priority table in scan scheduler   */
		CASE_RETURN_STRING(WMI_SCAN_SCH_PRIO_TBL_CMDID);
		/* This command to adjust the priority and min.max_rest_time
		 * of an on ongoing scan request.
		 */
		CASE_RETURN_STRING(WMI_SCAN_UPDATE_REQUEST_CMDID);

		/* PDEV(physical device) specific commands */
		/* set regulatorty ctl id used by FW to determine the exact
		 * ctl power limits */
		CASE_RETURN_STRING(WMI_PDEV_SET_REGDOMAIN_CMDID);
		/* set channel. mainly used for supporting monitor mode */
		CASE_RETURN_STRING(WMI_PDEV_SET_CHANNEL_CMDID);
		/* set pdev specific parameters */
		CASE_RETURN_STRING(WMI_PDEV_SET_PARAM_CMDID);
		/* enable packet log */
		CASE_RETURN_STRING(WMI_PDEV_PKTLOG_ENABLE_CMDID);
		/* disable packet log*/
		CASE_RETURN_STRING(WMI_PDEV_PKTLOG_DISABLE_CMDID);
		/* set wmm parameters */
		CASE_RETURN_STRING(WMI_PDEV_SET_WMM_PARAMS_CMDID);
		/* set HT cap ie that needs to be carried probe requests
		 * HT/VHT channels */
		CASE_RETURN_STRING(WMI_PDEV_SET_HT_CAP_IE_CMDID);
		/* set VHT cap ie that needs to be carried on probe
		 * requests on VHT channels */
		CASE_RETURN_STRING(WMI_PDEV_SET_VHT_CAP_IE_CMDID);

		/* Command to send the DSCP-to-TID map to the target */
		CASE_RETURN_STRING(WMI_PDEV_SET_DSCP_TID_MAP_CMDID);
		/* set quiet ie parameters. primarily used in AP mode */
		CASE_RETURN_STRING(WMI_PDEV_SET_QUIET_MODE_CMDID);
		/* Enable/Disable Green AP Power Save  */
		CASE_RETURN_STRING(WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID);
		/* get TPC config for the current operating channel */
		CASE_RETURN_STRING(WMI_PDEV_GET_TPC_CONFIG_CMDID);

		/* set the base MAC address for the physical device before
		 * a VDEV is created. For firmware that does not support
		 * this feature and this command, the pdev MAC address will
		 * not be changed. */
		CASE_RETURN_STRING(WMI_PDEV_SET_BASE_MACADDR_CMDID);

		/* eeprom content dump , the same to bdboard data */
		CASE_RETURN_STRING(WMI_PDEV_DUMP_CMDID);

		/* VDEV(virtual device) specific commands */
		/* vdev create */
		CASE_RETURN_STRING(WMI_VDEV_CREATE_CMDID);
		/* vdev delete */
		CASE_RETURN_STRING(WMI_VDEV_DELETE_CMDID);
		/* vdev start request */
		CASE_RETURN_STRING(WMI_VDEV_START_REQUEST_CMDID);
		/* vdev restart request (RX only, NO TX, used for CAC period)*/
		CASE_RETURN_STRING(WMI_VDEV_RESTART_REQUEST_CMDID);
		/* vdev up request */
		CASE_RETURN_STRING(WMI_VDEV_UP_CMDID);
		/* vdev stop request */
		CASE_RETURN_STRING(WMI_VDEV_STOP_CMDID);
		/* vdev down request */
		CASE_RETURN_STRING(WMI_VDEV_DOWN_CMDID);
		/* set a vdev param */
		CASE_RETURN_STRING(WMI_VDEV_SET_PARAM_CMDID);
		/* set a key (used for setting per peer unicast
		 * and per vdev multicast) */
		CASE_RETURN_STRING(WMI_VDEV_INSTALL_KEY_CMDID);

		/* wnm sleep mode command */
		CASE_RETURN_STRING(WMI_VDEV_WNM_SLEEPMODE_CMDID);
		CASE_RETURN_STRING(WMI_VDEV_WMM_ADDTS_CMDID);
		CASE_RETURN_STRING(WMI_VDEV_WMM_DELTS_CMDID);
		CASE_RETURN_STRING(WMI_VDEV_SET_WMM_PARAMS_CMDID);
		CASE_RETURN_STRING(WMI_VDEV_SET_GTX_PARAMS_CMDID);
		CASE_RETURN_STRING(WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMDID);

		CASE_RETURN_STRING(WMI_VDEV_PLMREQ_START_CMDID);
		CASE_RETURN_STRING(WMI_VDEV_PLMREQ_STOP_CMDID);
		CASE_RETURN_STRING(WMI_VDEV_TSF_TSTAMP_ACTION_CMDID);
		CASE_RETURN_STRING(WMI_VDEV_SET_IE_CMDID);

		/* peer specific commands */

		/** create a peer */
		CASE_RETURN_STRING(WMI_PEER_CREATE_CMDID);
		/** delete a peer */
		CASE_RETURN_STRING(WMI_PEER_DELETE_CMDID);
		/** flush specific  tid queues of a peer */
		CASE_RETURN_STRING(WMI_PEER_FLUSH_TIDS_CMDID);
		/** set a parameter of a peer */
		CASE_RETURN_STRING(WMI_PEER_SET_PARAM_CMDID);
		/* set peer to associated state. will cary all parameters
		 * determined during assocication time */
		CASE_RETURN_STRING(WMI_PEER_ASSOC_CMDID);
		/* add a wds  (4 address ) entry. used only for testing
		 * WDS feature on AP products */
		CASE_RETURN_STRING(WMI_PEER_ADD_WDS_ENTRY_CMDID);
		/* remove wds  (4 address ) entry. used only for testing WDS
		 * feature on AP products */
		CASE_RETURN_STRING(WMI_PEER_REMOVE_WDS_ENTRY_CMDID);
		/* set up mcast info for multicast to unicast conversion */
		CASE_RETURN_STRING(WMI_PEER_MCAST_GROUP_CMDID);
		/* request peer info from FW to get PEER_INFO_EVENTID */
		CASE_RETURN_STRING(WMI_PEER_INFO_REQ_CMDID);

		/* beacon/management specific commands */

		/* transmit beacon by reference. used for transmitting beacon
		 * on low latency interface like pcie */
		CASE_RETURN_STRING(WMI_BCN_TX_CMDID);
		/* transmit beacon by value */
		CASE_RETURN_STRING(WMI_PDEV_SEND_BCN_CMDID);
		/* set the beacon template. used in beacon offload mode to setup
		 * the common beacon template with the FW to be used by FW to
		 * generate beacons */
		CASE_RETURN_STRING(WMI_BCN_TMPL_CMDID);
		/* set beacon filter with FW */
		CASE_RETURN_STRING(WMI_BCN_FILTER_RX_CMDID);
		/* enable/disable filtering of probe requests in the firmware */
		CASE_RETURN_STRING(WMI_PRB_REQ_FILTER_RX_CMDID);
		/* transmit management frame by value. will be deprecated */
		CASE_RETURN_STRING(WMI_MGMT_TX_CMDID);
		/* set the probe response template. used in beacon offload mode
		 * to setup the common probe response template with the FW to
		 * be used by FW to generate probe responses */
		CASE_RETURN_STRING(WMI_PRB_TMPL_CMDID);

		/* commands to directly control ba negotiation directly from
		 * host. only used in test mode */

		/* turn off FW Auto addba mode and let host control addba */
		CASE_RETURN_STRING(WMI_ADDBA_CLEAR_RESP_CMDID);
		/* send add ba request */
		CASE_RETURN_STRING(WMI_ADDBA_SEND_CMDID);
		CASE_RETURN_STRING(WMI_ADDBA_STATUS_CMDID);
		/* send del ba */
		CASE_RETURN_STRING(WMI_DELBA_SEND_CMDID);
		/* set add ba response will be used by FW to generate
		 * addba response*/
		CASE_RETURN_STRING(WMI_ADDBA_SET_RESP_CMDID);
		/* send single VHT MPDU with AMSDU */
		CASE_RETURN_STRING(WMI_SEND_SINGLEAMSDU_CMDID);

		/* Station power save specific config */
		/* enable/disable station powersave */
		CASE_RETURN_STRING(WMI_STA_POWERSAVE_MODE_CMDID);
		/* set station power save specific parameter */
		CASE_RETURN_STRING(WMI_STA_POWERSAVE_PARAM_CMDID);
		/* set station mimo powersave mode */
		CASE_RETURN_STRING(WMI_STA_MIMO_PS_MODE_CMDID);

		/* DFS-specific commands */
		/* enable DFS (radar detection)*/
		CASE_RETURN_STRING(WMI_PDEV_DFS_ENABLE_CMDID);
		/* disable DFS (radar detection)*/
		CASE_RETURN_STRING(WMI_PDEV_DFS_DISABLE_CMDID);
		/* enable DFS phyerr/parse filter offload */
		CASE_RETURN_STRING(WMI_DFS_PHYERR_FILTER_ENA_CMDID);
		/* enable DFS phyerr/parse filter offload */
		CASE_RETURN_STRING(WMI_DFS_PHYERR_FILTER_DIS_CMDID);

		/* Roaming specific  commands */
		/* set roam scan mode */
		CASE_RETURN_STRING(WMI_ROAM_SCAN_MODE);
		/* set roam scan rssi threshold below which roam
		 * scan is enabled  */
		CASE_RETURN_STRING(WMI_ROAM_SCAN_RSSI_THRESHOLD);
		/* set roam scan period for periodic roam scan mode  */
		CASE_RETURN_STRING(WMI_ROAM_SCAN_PERIOD);
		/* set roam scan trigger rssi change threshold   */
		CASE_RETURN_STRING(WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD);
		/* set roam AP profile   */
		CASE_RETURN_STRING(WMI_ROAM_AP_PROFILE);
		/* set channel list for roam scans */
		CASE_RETURN_STRING(WMI_ROAM_CHAN_LIST);
		/* offload scan specific commands */
		/* set offload scan AP profile   */
		CASE_RETURN_STRING(WMI_OFL_SCAN_ADD_AP_PROFILE);
		/* remove offload scan AP profile   */
		CASE_RETURN_STRING(WMI_OFL_SCAN_REMOVE_AP_PROFILE);
		/* set offload scan period   */
		CASE_RETURN_STRING(WMI_OFL_SCAN_PERIOD);

		/* P2P specific commands */
		/* set P2P device info. FW will used by FW to create P2P IE
		 * to be carried in probe response generated during p2p listen
		 * and for p2p discoverability  */
		CASE_RETURN_STRING(WMI_P2P_DEV_SET_DEVICE_INFO);
		/* enable/disable p2p discoverability on STA/AP VDEVs  */
		CASE_RETURN_STRING(WMI_P2P_DEV_SET_DISCOVERABILITY);
		/* set p2p ie to be carried in beacons generated by FW for GO */
		CASE_RETURN_STRING(WMI_P2P_GO_SET_BEACON_IE);
		/* set p2p ie to be carried in probe response frames generated
		 * by FW for GO  */
		CASE_RETURN_STRING(WMI_P2P_GO_SET_PROBE_RESP_IE);
		/* set the vendor specific p2p ie data.
		 * FW will use this to parse the P2P NoA
		 * attribute in the beacons/probe responses received.
		 */
		CASE_RETURN_STRING(WMI_P2P_SET_VENDOR_IE_DATA_CMDID);
		/* set the configure of p2p find offload */
		CASE_RETURN_STRING(WMI_P2P_DISC_OFFLOAD_CONFIG_CMDID);
		/* set the vendor specific p2p ie data for p2p find offload */
		CASE_RETURN_STRING(WMI_P2P_DISC_OFFLOAD_APPIE_CMDID);
		/* set the BSSID/device name pattern of p2p find offload */
		CASE_RETURN_STRING(WMI_P2P_DISC_OFFLOAD_PATTERN_CMDID);
		/* set OppPS related parameters **/
		CASE_RETURN_STRING(WMI_P2P_SET_OPPPS_PARAM_CMDID);

		/* AP power save specific config
		 * set AP power save specific param */
		CASE_RETURN_STRING(WMI_AP_PS_PEER_PARAM_CMDID);
		/* set AP UAPSD coex pecific param */
		CASE_RETURN_STRING(WMI_AP_PS_PEER_UAPSD_COEX_CMDID);

		/* Rate-control specific commands */
		CASE_RETURN_STRING(WMI_PEER_RATE_RETRY_SCHED_CMDID);

		/* WLAN Profiling commands. */
		CASE_RETURN_STRING(WMI_WLAN_PROFILE_TRIGGER_CMDID);
		CASE_RETURN_STRING(WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID);
		CASE_RETURN_STRING(WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID);
		CASE_RETURN_STRING(WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID);
		CASE_RETURN_STRING(WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID);

		/* Suspend resume command Ids */
		CASE_RETURN_STRING(WMI_PDEV_SUSPEND_CMDID);
		CASE_RETURN_STRING(WMI_PDEV_RESUME_CMDID);

		/* Beacon filter commands */
		/* add a beacon filter */
		CASE_RETURN_STRING(WMI_ADD_BCN_FILTER_CMDID);
		/* remove a  beacon filter */
		CASE_RETURN_STRING(WMI_RMV_BCN_FILTER_CMDID);

		/* WOW Specific WMI commands */
		/* add pattern for awake */
		CASE_RETURN_STRING(WMI_WOW_ADD_WAKE_PATTERN_CMDID);
		/* deleta a wake pattern */
		CASE_RETURN_STRING(WMI_WOW_DEL_WAKE_PATTERN_CMDID);
		/* enable/deisable wake event  */
		CASE_RETURN_STRING(WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID);
		/* enable WOW  */
		CASE_RETURN_STRING(WMI_WOW_ENABLE_CMDID);
		/* host woke up from sleep event to FW. Generated in response
		 * to WOW Hardware event */
		CASE_RETURN_STRING(WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID);

		/* RTT measurement related cmd */
		/* reques to make an RTT measurement */
		CASE_RETURN_STRING(WMI_RTT_MEASREQ_CMDID);
		/* reques to report a tsf measurement */
		CASE_RETURN_STRING(WMI_RTT_TSF_CMDID);

		/* spectral scan command */
		/* configure spectral scan */
		CASE_RETURN_STRING(WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID);
		/* enable/disable spectral scan and trigger */
		CASE_RETURN_STRING(WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID);

		/* F/W stats */
		/* one time request for stats */
		CASE_RETURN_STRING(WMI_REQUEST_STATS_CMDID);
		/* Push MCC Adaptive Scheduler Stats to Firmware */
		CASE_RETURN_STRING(WMI_MCC_SCHED_TRAFFIC_STATS_CMDID);

		/* ARP OFFLOAD REQUEST*/
		CASE_RETURN_STRING(WMI_SET_ARP_NS_OFFLOAD_CMDID);

		/* Proactive ARP Response Add Pattern Command*/
		CASE_RETURN_STRING(WMI_ADD_PROACTIVE_ARP_RSP_PATTERN_CMDID);

		/* Proactive ARP Response Del Pattern Command*/
		CASE_RETURN_STRING(WMI_DEL_PROACTIVE_ARP_RSP_PATTERN_CMDID);

		/* NS offload confid*/
		CASE_RETURN_STRING(WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID);

		/* GTK offload Specific WMI commands */
		CASE_RETURN_STRING(WMI_GTK_OFFLOAD_CMDID);

		/* CSA offload Specific WMI commands */
		/* csa offload enable */
		CASE_RETURN_STRING(WMI_CSA_OFFLOAD_ENABLE_CMDID);
		/* chan switch command */
		CASE_RETURN_STRING(WMI_CSA_OFFLOAD_CHANSWITCH_CMDID);

		/* Chatter commands */
		/* Change chatter mode of operation */
		CASE_RETURN_STRING(WMI_CHATTER_SET_MODE_CMDID);
		/* chatter add coalescing filter command */
		CASE_RETURN_STRING(WMI_CHATTER_ADD_COALESCING_FILTER_CMDID);
		/* chatter delete coalescing filter command */
		CASE_RETURN_STRING(WMI_CHATTER_DELETE_COALESCING_FILTER_CMDID);
		/* chatter coalecing query command */
		CASE_RETURN_STRING(WMI_CHATTER_COALESCING_QUERY_CMDID);

		/* addba specific commands */
		/* start the aggregation on this TID */
		CASE_RETURN_STRING(WMI_PEER_TID_ADDBA_CMDID);
		/* stop the aggregation on this TID */
		CASE_RETURN_STRING(WMI_PEER_TID_DELBA_CMDID);

		/* set station mimo powersave method */
		CASE_RETURN_STRING(WMI_STA_DTIM_PS_METHOD_CMDID);
		/* Configure the Station UAPSD AC Auto Trigger Parameters */
		CASE_RETURN_STRING(WMI_STA_UAPSD_AUTO_TRIG_CMDID);
		/* Configure the Keep Alive Parameters */
		CASE_RETURN_STRING(WMI_STA_KEEPALIVE_CMDID);

		/* Request ssn from target for a sta/tid pair */
		CASE_RETURN_STRING(WMI_BA_REQ_SSN_CMDID);
		/* misc command group */
		/* echo command mainly used for testing */
		CASE_RETURN_STRING(WMI_ECHO_CMDID);

		/* !!IMPORTANT!!
		 * If you need to add a new WMI command to the CASE_RETURN_STRING(WMI_GRP_MISC sub-group,
		 * please make sure you add it BEHIND CASE_RETURN_STRING(WMI_PDEV_UTF_CMDID);
		 * as we MUST have a fixed value here to maintain compatibility between
		 * UTF and the ART2 driver
		 */
		/* UTF WMI commands */
		CASE_RETURN_STRING(WMI_PDEV_UTF_CMDID);

		/* set debug log config */
		CASE_RETURN_STRING(WMI_DBGLOG_CFG_CMDID);
		/* QVIT specific command id */
		CASE_RETURN_STRING(WMI_PDEV_QVIT_CMDID);
		/* Factory Testing Mode request command
		 * used for integrated chipsets */
		CASE_RETURN_STRING(WMI_PDEV_FTM_INTG_CMDID);
		/* set and get keepalive parameters command */
		CASE_RETURN_STRING(WMI_VDEV_SET_KEEPALIVE_CMDID);
		CASE_RETURN_STRING(WMI_VDEV_GET_KEEPALIVE_CMDID);
		/* For fw recovery test command */
		CASE_RETURN_STRING(WMI_FORCE_FW_HANG_CMDID);
		/* Set Mcast/Bdcast filter */
		CASE_RETURN_STRING(WMI_SET_MCASTBCAST_FILTER_CMDID);
		/* set thermal management params */
		CASE_RETURN_STRING(WMI_THERMAL_MGMT_CMDID);
		CASE_RETURN_STRING(WMI_RSSI_BREACH_MONITOR_CONFIG_CMDID);
		CASE_RETURN_STRING(WMI_LRO_CONFIG_CMDID);
		CASE_RETURN_STRING(WMI_TRANSFER_DATA_TO_FLASH_CMDID);
		CASE_RETURN_STRING(WMI_CONFIG_ENHANCED_MCAST_FILTER_CMDID);
		CASE_RETURN_STRING(WMI_MAWC_SENSOR_REPORT_IND_CMDID);
		CASE_RETURN_STRING(WMI_ROAM_CONFIGURE_MAWC_CMDID);
		CASE_RETURN_STRING(WMI_NLO_CONFIGURE_MAWC_CMDID);
		CASE_RETURN_STRING(WMI_EXTSCAN_CONFIGURE_MAWC_CMDID);
		/* GPIO Configuration */
		CASE_RETURN_STRING(WMI_GPIO_CONFIG_CMDID);
		CASE_RETURN_STRING(WMI_GPIO_OUTPUT_CMDID);

		/* Txbf configuration command */
		CASE_RETURN_STRING(WMI_TXBF_CMDID);

		/* FWTEST Commands */
		CASE_RETURN_STRING(WMI_FWTEST_VDEV_MCC_SET_TBTT_MODE_CMDID);
		/* set NoA descs */
		CASE_RETURN_STRING(WMI_FWTEST_P2P_SET_NOA_PARAM_CMDID);

		/* TDLS Configuration */
		/* enable/disable TDLS */
		CASE_RETURN_STRING(WMI_TDLS_SET_STATE_CMDID);
		/* set tdls peer state */
		CASE_RETURN_STRING(WMI_TDLS_PEER_UPDATE_CMDID);

		/* Resmgr Configuration */
		/* Adaptive OCS is enabled by default in the FW.
		 * This command is used to disable FW based adaptive OCS.
		 */
		CASE_RETURN_STRING
			(WMI_RESMGR_ADAPTIVE_OCS_ENABLE_DISABLE_CMDID);
		/* set the requested channel time quota for the home channels */
		CASE_RETURN_STRING(WMI_RESMGR_SET_CHAN_TIME_QUOTA_CMDID);
		/* set the requested latency for the home channels */
		CASE_RETURN_STRING(WMI_RESMGR_SET_CHAN_LATENCY_CMDID);

		/* STA SMPS Configuration */
		/* force SMPS mode */
		CASE_RETURN_STRING(WMI_STA_SMPS_FORCE_MODE_CMDID);
		/* set SMPS parameters */
		CASE_RETURN_STRING(WMI_STA_SMPS_PARAM_CMDID);

		/* Wlan HB commands */
		/* enalbe/disable wlan HB */
		CASE_RETURN_STRING(WMI_HB_SET_ENABLE_CMDID);
		/* set tcp parameters for wlan HB */
		CASE_RETURN_STRING(WMI_HB_SET_TCP_PARAMS_CMDID);
		/* set tcp pkt filter for wlan HB */
		CASE_RETURN_STRING(WMI_HB_SET_TCP_PKT_FILTER_CMDID);
		/* set udp parameters for wlan HB */
		CASE_RETURN_STRING(WMI_HB_SET_UDP_PARAMS_CMDID);
		/* set udp pkt filter for wlan HB */
		CASE_RETURN_STRING(WMI_HB_SET_UDP_PKT_FILTER_CMDID);

		/* Wlan RMC commands*/
		/* enable/disable RMC */
		CASE_RETURN_STRING(WMI_RMC_SET_MODE_CMDID);
		/* configure action frame period */
		CASE_RETURN_STRING(WMI_RMC_SET_ACTION_PERIOD_CMDID);
		/* For debug/future enhancement purposes only,
		 * configures/finetunes RMC algorithms */
		CASE_RETURN_STRING(WMI_RMC_CONFIG_CMDID);

		/* WLAN MHF offload commands */
		/* enable/disable MHF offload */
		CASE_RETURN_STRING(WMI_MHF_OFFLOAD_SET_MODE_CMDID);
		/* Plumb routing table for MHF offload */
		CASE_RETURN_STRING(WMI_MHF_OFFLOAD_PLUMB_ROUTING_TBL_CMDID);

		/* location scan commands */
		/* start batch scan */
		CASE_RETURN_STRING(WMI_BATCH_SCAN_ENABLE_CMDID);
		/* stop batch scan */
		CASE_RETURN_STRING(WMI_BATCH_SCAN_DISABLE_CMDID);
		/* get batch scan result */
		CASE_RETURN_STRING(WMI_BATCH_SCAN_TRIGGER_RESULT_CMDID);
		/* OEM related cmd */
		CASE_RETURN_STRING(WMI_OEM_REQ_CMDID);
		CASE_RETURN_STRING(WMI_OEM_REQUEST_CMDID);
		/* NAN request cmd */
		CASE_RETURN_STRING(WMI_NAN_CMDID);
		/* Modem power state cmd */
		CASE_RETURN_STRING(WMI_MODEM_POWER_STATE_CMDID);
		CASE_RETURN_STRING(WMI_REQUEST_STATS_EXT_CMDID);
		CASE_RETURN_STRING(WMI_OBSS_SCAN_ENABLE_CMDID);
		CASE_RETURN_STRING(WMI_OBSS_SCAN_DISABLE_CMDID);
		CASE_RETURN_STRING(WMI_PEER_GET_ESTIMATED_LINKSPEED_CMDID);
		CASE_RETURN_STRING(WMI_ROAM_SCAN_CMD);
		CASE_RETURN_STRING(WMI_PDEV_SET_LED_CONFIG_CMDID);
		CASE_RETURN_STRING(WMI_HOST_AUTO_SHUTDOWN_CFG_CMDID);
		CASE_RETURN_STRING(WMI_CHAN_AVOID_UPDATE_CMDID);
		CASE_RETURN_STRING(WMI_COEX_CONFIG_CMDID);
		CASE_RETURN_STRING(WMI_WOW_IOAC_ADD_KEEPALIVE_CMDID);
		CASE_RETURN_STRING(WMI_WOW_IOAC_DEL_KEEPALIVE_CMDID);
		CASE_RETURN_STRING(WMI_WOW_IOAC_ADD_WAKE_PATTERN_CMDID);
		CASE_RETURN_STRING(WMI_WOW_IOAC_DEL_WAKE_PATTERN_CMDID);
		CASE_RETURN_STRING(WMI_REQUEST_LINK_STATS_CMDID);
		CASE_RETURN_STRING(WMI_START_LINK_STATS_CMDID);
		CASE_RETURN_STRING(WMI_CLEAR_LINK_STATS_CMDID);
		CASE_RETURN_STRING(WMI_GET_FW_MEM_DUMP_CMDID);
		CASE_RETURN_STRING(WMI_LPI_MGMT_SNOOPING_CONFIG_CMDID);
		CASE_RETURN_STRING(WMI_LPI_START_SCAN_CMDID);
		CASE_RETURN_STRING(WMI_LPI_STOP_SCAN_CMDID);
		CASE_RETURN_STRING(WMI_EXTSCAN_START_CMDID);
		CASE_RETURN_STRING(WMI_EXTSCAN_STOP_CMDID);
		CASE_RETURN_STRING
			(WMI_EXTSCAN_CONFIGURE_WLAN_CHANGE_MONITOR_CMDID);
		CASE_RETURN_STRING(WMI_EXTSCAN_CONFIGURE_HOTLIST_MONITOR_CMDID);
		CASE_RETURN_STRING(WMI_EXTSCAN_GET_CACHED_RESULTS_CMDID);
		CASE_RETURN_STRING(WMI_EXTSCAN_GET_WLAN_CHANGE_RESULTS_CMDID);
		CASE_RETURN_STRING(WMI_EXTSCAN_SET_CAPABILITIES_CMDID);
		CASE_RETURN_STRING(WMI_EXTSCAN_GET_CAPABILITIES_CMDID);
		CASE_RETURN_STRING(WMI_EXTSCAN_CONFIGURE_HOTLIST_SSID_MONITOR_CMDID);
		CASE_RETURN_STRING(WMI_ROAM_SYNCH_COMPLETE);
		CASE_RETURN_STRING(WMI_D0_WOW_ENABLE_DISABLE_CMDID);
		CASE_RETURN_STRING(WMI_EXTWOW_ENABLE_CMDID);
		CASE_RETURN_STRING(WMI_EXTWOW_SET_APP_TYPE1_PARAMS_CMDID);
		CASE_RETURN_STRING(WMI_EXTWOW_SET_APP_TYPE2_PARAMS_CMDID);
		CASE_RETURN_STRING(WMI_UNIT_TEST_CMDID);
		CASE_RETURN_STRING(WMI_ROAM_SET_RIC_REQUEST_CMDID);
		CASE_RETURN_STRING(WMI_PDEV_GET_TEMPERATURE_CMDID);
		CASE_RETURN_STRING(WMI_SET_DHCP_SERVER_OFFLOAD_CMDID);
		CASE_RETURN_STRING(WMI_TPC_CHAINMASK_CONFIG_CMDID);
		CASE_RETURN_STRING(WMI_IPA_OFFLOAD_ENABLE_DISABLE_CMDID);
		CASE_RETURN_STRING(WMI_SCAN_PROB_REQ_OUI_CMDID);
		CASE_RETURN_STRING(WMI_TDLS_SET_OFFCHAN_MODE_CMDID);
		CASE_RETURN_STRING(WMI_PDEV_SET_LED_FLASHING_CMDID);
		CASE_RETURN_STRING(WMI_MDNS_OFFLOAD_ENABLE_CMDID);
		CASE_RETURN_STRING(WMI_MDNS_SET_FQDN_CMDID);
		CASE_RETURN_STRING(WMI_MDNS_SET_RESPONSE_CMDID);
		CASE_RETURN_STRING(WMI_MDNS_GET_STATS_CMDID);
		CASE_RETURN_STRING(WMI_ROAM_INVOKE_CMDID);
		CASE_RETURN_STRING(WMI_SET_ANTENNA_DIVERSITY_CMDID);
		CASE_RETURN_STRING(WMI_SAP_OFL_ENABLE_CMDID);
		CASE_RETURN_STRING(WMI_APFIND_CMDID);
		CASE_RETURN_STRING(WMI_PASSPOINT_LIST_CONFIG_CMDID);
		CASE_RETURN_STRING(WMI_OCB_SET_SCHED_CMDID);
		CASE_RETURN_STRING(WMI_OCB_SET_CONFIG_CMDID);
		CASE_RETURN_STRING(WMI_OCB_SET_UTC_TIME_CMDID);
		CASE_RETURN_STRING(WMI_OCB_START_TIMING_ADVERT_CMDID);
		CASE_RETURN_STRING(WMI_OCB_STOP_TIMING_ADVERT_CMDID);
		CASE_RETURN_STRING(WMI_OCB_GET_TSF_TIMER_CMDID);
		CASE_RETURN_STRING(WMI_DCC_GET_STATS_CMDID);
		CASE_RETURN_STRING(WMI_DCC_CLEAR_STATS_CMDID);
		CASE_RETURN_STRING(WMI_DCC_UPDATE_NDL_CMDID);
		CASE_RETURN_STRING(WMI_ROAM_FILTER_CMDID);
		CASE_RETURN_STRING(WMI_ROAM_SUBNET_CHANGE_CONFIG_CMDID);
		CASE_RETURN_STRING(WMI_DEBUG_MESG_FLUSH_CMDID);
		CASE_RETURN_STRING(WMI_PEER_SET_RATE_REPORT_CONDITION_CMDID);
		CASE_RETURN_STRING(WMI_SOC_SET_PCL_CMDID);
		CASE_RETURN_STRING(WMI_SOC_SET_HW_MODE_CMDID);
		CASE_RETURN_STRING(WMI_SOC_SET_DUAL_MAC_CONFIG_CMDID);
		CASE_RETURN_STRING(WMI_WOW_ENABLE_ICMPV6_NA_FLT_CMDID);
		CASE_RETURN_STRING(WMI_DIAG_EVENT_LOG_CONFIG_CMDID);
		CASE_RETURN_STRING(WMI_PACKET_FILTER_CONFIG_CMDID);
		CASE_RETURN_STRING(WMI_PACKET_FILTER_ENABLE_CMDID);
		CASE_RETURN_STRING(WMI_SAP_SET_BLACKLIST_PARAM_CMDID);
		CASE_RETURN_STRING(WMI_WOW_UDP_SVC_OFLD_CMDID);
		CASE_RETURN_STRING(WMI_MGMT_TX_SEND_CMDID);
		CASE_RETURN_STRING(WMI_SOC_SET_ANTENNA_MODE_CMDID);
		CASE_RETURN_STRING(WMI_WOW_HOSTWAKEUP_GPIO_PIN_PATTERN_CONFIG_CMDID);
		CASE_RETURN_STRING(WMI_AP_PS_EGAP_PARAM_CMDID);
		CASE_RETURN_STRING(WMI_PMF_OFFLOAD_SET_SA_QUERY_CMDID);
		CASE_RETURN_STRING(WMI_BPF_GET_CAPABILITY_CMDID);
		CASE_RETURN_STRING(WMI_BPF_GET_VDEV_STATS_CMDID);
		CASE_RETURN_STRING(WMI_BPF_SET_VDEV_INSTRUCTIONS_CMDID);
		CASE_RETURN_STRING(WMI_BPF_DEL_VDEV_INSTRUCTIONS_CMDID);
		CASE_RETURN_STRING(WMI_NDI_GET_CAP_REQ_CMDID);
		CASE_RETURN_STRING(WMI_NDP_INITIATOR_REQ_CMDID);
		CASE_RETURN_STRING(WMI_NDP_RESPONDER_REQ_CMDID);
		CASE_RETURN_STRING(WMI_NDP_END_REQ_CMDID);
		CASE_RETURN_STRING(WMI_PEER_UPDATE_WDS_ENTRY_CMDID);
		CASE_RETURN_STRING(WMI_PEER_ADD_PROXY_STA_ENTRY_CMDID);
		CASE_RETURN_STRING(WMI_PDEV_FIPS_CMDID);
		CASE_RETURN_STRING(WMI_PDEV_SMART_ANT_ENABLE_CMDID);
		CASE_RETURN_STRING(WMI_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID);
		CASE_RETURN_STRING(WMI_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID);
		CASE_RETURN_STRING(WMI_PDEV_SET_CTL_TABLE_CMDID);
		CASE_RETURN_STRING(WMI_PDEV_SET_MIMOGAIN_TABLE_CMDID);
		CASE_RETURN_STRING(WMI_PDEV_GET_TPC_CMDID);
		CASE_RETURN_STRING(WMI_MIB_STATS_ENABLE_CMDID);
		CASE_RETURN_STRING(WMI_PDEV_GET_ANI_CCK_CONFIG_CMDID);
		CASE_RETURN_STRING(WMI_PDEV_GET_ANI_OFDM_CONFIG_CMDID);
		CASE_RETURN_STRING(WMI_VDEV_RATEMASK_CMDID);
		CASE_RETURN_STRING(WMI_VDEV_ATF_REQUEST_CMDID);
		CASE_RETURN_STRING(WMI_VDEV_SET_DSCP_TID_MAP_CMDID);
		CASE_RETURN_STRING(WMI_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID);
		CASE_RETURN_STRING(WMI_VDEV_SET_QUIET_MODE_CMDID);
		CASE_RETURN_STRING(WMI_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID);
		CASE_RETURN_STRING(WMI_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID);
		CASE_RETURN_STRING(WMI_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID);
		CASE_RETURN_STRING(WMI_PEER_ATF_REQUEST_CMDID);
		CASE_RETURN_STRING(WMI_FWTEST_CMDID);
		CASE_RETURN_STRING(WMI_QBOOST_CFG_CMDID);
		CASE_RETURN_STRING(WMI_PDEV_GET_NFCAL_POWER_CMDID);
		CASE_RETURN_STRING(WMI_PDEV_SET_PCL_CMDID);
		CASE_RETURN_STRING(WMI_PDEV_SET_HW_MODE_CMDID);
		CASE_RETURN_STRING(WMI_PDEV_SET_MAC_CONFIG_CMDID);
		CASE_RETURN_STRING(WMI_PDEV_SET_ANTENNA_MODE_CMDID);
		CASE_RETURN_STRING(WMI_ROAM_SET_MBO_PARAM_CMDID);
		CASE_RETURN_STRING(WMI_CHAN_AVOID_RPT_ALLOW_CMDID);
		CASE_RETURN_STRING(WMI_SET_PERIODIC_CHANNEL_STATS_CONFIG_CMDID);
		CASE_RETURN_STRING(WMI_VDEV_SET_CUSTOM_AGGR_SIZE_CMDID);
		CASE_RETURN_STRING(WMI_PDEV_WAL_POWER_DEBUG_CMDID);
	}

	return "Invalid WMI cmd";
}

#ifdef QCA_WIFI_3_0_EMU
static inline void wma_log_cmd_id(WMI_CMD_ID cmd_id)
{
	WMI_LOGE("Send WMI command:%s command_id:%d",
		 get_wmi_cmd_string(cmd_id), cmd_id);
}
#else
static inline void wma_log_cmd_id(WMI_CMD_ID cmd_id)
{
	WMI_LOGD("Send WMI command:%s command_id:%d",
		 get_wmi_cmd_string(cmd_id), cmd_id);
}
#endif
#endif

/**
 * wmi_is_runtime_pm_cmd() - check if a cmd is from suspend resume sequence
 * @cmd: command to check
 *
 * Return: true if the command is part of the suspend resume sequence.
 */
#ifndef WMI_NON_TLV_SUPPORT
static bool wmi_is_runtime_pm_cmd(WMI_CMD_ID cmd_id)
{
	switch (cmd_id) {
	case WMI_WOW_ENABLE_CMDID:
	case WMI_PDEV_SUSPEND_CMDID:
	case WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID:
	case WMI_WOW_ADD_WAKE_PATTERN_CMDID:
	case WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID:
	case WMI_PDEV_RESUME_CMDID:
	case WMI_WOW_DEL_WAKE_PATTERN_CMDID:
	case WMI_D0_WOW_ENABLE_DISABLE_CMDID:
		return true;

	default:
		return false;
	}
}

/**
 * wmi_is_pm_resume_cmd() - check if a cmd is part of the resume sequence
 * @cmd_id: command to check
 *
 * Return: true if the command is part of the resume sequence.
 */
static bool wmi_is_pm_resume_cmd(WMI_CMD_ID cmd_id)
{
	switch (cmd_id) {
	case WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID:
	case WMI_PDEV_RESUME_CMDID:
		return true;

	default:
		return false;
	}
}
#else
static bool wmi_is_runtime_pm_cmd(WMI_CMD_ID cmd_id)
{
	return false;
}
static bool wmi_is_pm_resume_cmd(WMI_CMD_ID cmd_id)
{
	return false;
}
#endif

/**
 * wmi_unified_cmd_send() - WMI command API
 * @wmi_handle: handle to wmi
 * @buf: wmi buf
 * @len: wmi buffer length
 * @cmd_id: wmi command id
 *
 * Return: 0 on success
 */
int wmi_unified_cmd_send(wmi_unified_t wmi_handle, wmi_buf_t buf, uint32_t len,
			 WMI_CMD_ID cmd_id)
{
	HTC_PACKET *pkt;
	A_STATUS status;
	uint16_t htc_tag = 0;

	if (wmi_get_runtime_pm_inprogress(wmi_handle)) {
		if (wmi_is_runtime_pm_cmd(cmd_id))
			htc_tag = HTC_TX_PACKET_TAG_AUTO_PM;
	} else if (qdf_atomic_read(&wmi_handle->is_target_suspended) &&
		(!wmi_is_pm_resume_cmd(cmd_id))) {
		QDF_TRACE(QDF_MODULE_ID_WMI, QDF_TRACE_LEVEL_ERROR,
				  "%s: Target is suspended", __func__);
		QDF_ASSERT(0);
		return QDF_STATUS_E_BUSY;
	}
	if (wmi_handle->wmi_stopinprogress) {
		QDF_TRACE(QDF_MODULE_ID_WMI, QDF_TRACE_LEVEL_ERROR,
			"WMI  stop in progress\n");
		return -EINVAL;
	}

	/* Do sanity check on the TLV parameter structure */
#ifndef WMI_NON_TLV_SUPPORT
	if (wmi_handle->target_type == WMI_TLV_TARGET) {
		void *buf_ptr = (void *)qdf_nbuf_data(buf);

		if (wmitlv_check_command_tlv_params(NULL, buf_ptr, len, cmd_id)
		    != 0) {
			QDF_TRACE(QDF_MODULE_ID_WMI, QDF_TRACE_LEVEL_ERROR,
			"\nERROR: %s: Invalid WMI Param Buffer for Cmd:%d",
				__func__, cmd_id);
			return QDF_STATUS_E_INVAL;
		}
	}
#endif

	if (qdf_nbuf_push_head(buf, sizeof(WMI_CMD_HDR)) == NULL) {
		QDF_TRACE(QDF_MODULE_ID_WMI, QDF_TRACE_LEVEL_ERROR,
			 "%s, Failed to send cmd %x, no memory",
			 __func__, cmd_id);
		return QDF_STATUS_E_NOMEM;
	}

	WMI_SET_FIELD(qdf_nbuf_data(buf), WMI_CMD_HDR, COMMANDID, cmd_id);

	qdf_atomic_inc(&wmi_handle->pending_cmds);
	if (qdf_atomic_read(&wmi_handle->pending_cmds) >= WMI_MAX_CMDS) {
		QDF_TRACE(QDF_MODULE_ID_WMI, QDF_TRACE_LEVEL_ERROR,
		    "\n%s: hostcredits = %d", __func__,
		wmi_get_host_credits(wmi_handle));
		htc_dump_counter_info(wmi_handle->htc_handle);
		qdf_atomic_dec(&wmi_handle->pending_cmds);
		QDF_TRACE(QDF_MODULE_ID_WMI, QDF_TRACE_LEVEL_ERROR,
		    "%s: MAX 1024 WMI Pending cmds reached.", __func__);
		QDF_BUG(0);
		return QDF_STATUS_E_BUSY;
	}

	pkt = qdf_mem_malloc(sizeof(*pkt));
	if (!pkt) {
		qdf_atomic_dec(&wmi_handle->pending_cmds);
		QDF_TRACE(QDF_MODULE_ID_WMI, QDF_TRACE_LEVEL_ERROR,
			 "%s, Failed to alloc htc packet %x, no memory",
			 __func__, cmd_id);
		return QDF_STATUS_E_NOMEM;
	}

	SET_HTC_PACKET_INFO_TX(pkt,
			       NULL,
			       qdf_nbuf_data(buf), len + sizeof(WMI_CMD_HDR),
			       wmi_handle->wmi_endpoint_id, htc_tag);

	SET_HTC_PACKET_NET_BUF_CONTEXT(pkt, buf);
#ifndef WMI_NON_TLV_SUPPORT
	wma_log_cmd_id(cmd_id);
#endif

#ifdef WMI_INTERFACE_EVENT_LOGGING
	qdf_spin_lock_bh(&wmi_handle->wmi_record_lock);
	/*Record 16 bytes of WMI cmd data - exclude TLV and WMI headers */
	if (cmd_id == WMI_MGMT_TX_SEND_CMDID) {
		WMI_MGMT_COMMAND_RECORD(cmd_id,
					((uint32_t *)qdf_nbuf_data(buf) + 2));
	} else {
		WMI_COMMAND_RECORD(cmd_id, ((uint32_t *) qdf_nbuf_data(buf) +
					    2));
	}

	qdf_spin_unlock_bh(&wmi_handle->wmi_record_lock);
#endif

	status = htc_send_pkt(wmi_handle->htc_handle, pkt);

	if (A_OK != status) {
		qdf_atomic_dec(&wmi_handle->pending_cmds);
		QDF_TRACE(QDF_MODULE_ID_WMI, QDF_TRACE_LEVEL_ERROR,
		   "%s %d, htc_send_pkt failed", __func__, __LINE__);
	}
	if (status)
		return QDF_STATUS_E_FAILURE;

	return QDF_STATUS_SUCCESS;
}

/**
 * wmi_unified_get_event_handler_ix() - gives event handler's index
 * @wmi_handle: handle to wmi
 * @event_id: wmi  event id
 *
 * Return: event handler's index
 */
int wmi_unified_get_event_handler_ix(wmi_unified_t wmi_handle,
				     uint32_t event_id)
{
	uint32_t idx = 0;
	int32_t invalid_idx = -1;

	for (idx = 0; (idx < wmi_handle->max_event_idx &&
		       idx < WMI_UNIFIED_MAX_EVENT); ++idx) {
		if (wmi_handle->event_id[idx] == event_id &&
		    wmi_handle->event_handler[idx] != NULL) {
			return idx;
		}
	}

	return invalid_idx;
}

/**
 * wmi_unified_register_event_handler() - register wmi event handler
 * @wmi_handle: handle to wmi
 * @event_id: wmi event id
 * @handler_func: wmi event handler function
 * @rx_ctx: rx execution context for wmi rx events
 *
 * Return: 0 on success
 */
int wmi_unified_register_event_handler(wmi_unified_t wmi_handle,
				       uint32_t event_id,
				       wmi_unified_event_handler handler_func,
				       uint8_t rx_ctx)
{
	uint32_t idx = 0;
	uint32_t evt_id;

#ifdef WMI_TLV_AND_NON_TLV_SUPPORT
	if (event_id >= wmi_events_max ||
		wmi_handle->wmi_events[event_id] == WMI_EVENT_ID_INVALID) {
		qdf_print("%s: Event id %d is unavailable\n",
				 __func__, event_id);
		return QDF_STATUS_E_FAILURE;
	}
	evt_id = wmi_handle->wmi_events[event_id];
#else
	evt_id = event_id;
#endif
	if (wmi_unified_get_event_handler_ix(wmi_handle, evt_id) != -1) {
		qdf_print("%s : event handler already registered 0x%x\n",
		       __func__, evt_id);
		return QDF_STATUS_E_FAILURE;
	}
	if (wmi_handle->max_event_idx == WMI_UNIFIED_MAX_EVENT) {
		qdf_print("%s : no more event handlers 0x%x\n",
		       __func__, evt_id);
		return QDF_STATUS_E_FAILURE;
	}
	idx = wmi_handle->max_event_idx;
	wmi_handle->event_handler[idx] = handler_func;
	wmi_handle->event_id[idx] = evt_id;
	qdf_spin_lock_bh(&wmi_handle->ctx_lock);
	wmi_handle->ctx[idx] = rx_ctx;
	qdf_spin_unlock_bh(&wmi_handle->ctx_lock);
	wmi_handle->max_event_idx++;

	return 0;
}

/**
 * wmi_unified_unregister_event_handler() - unregister wmi event handler
 * @wmi_handle: handle to wmi
 * @event_id: wmi event id
 *
 * Return: 0 on success
 */
int wmi_unified_unregister_event_handler(wmi_unified_t wmi_handle,
					 uint32_t event_id)
{
	uint32_t idx = 0;
	uint32_t evt_id;

#ifdef WMI_TLV_AND_NON_TLV_SUPPORT
	if (event_id >= wmi_events_max ||
		wmi_handle->wmi_events[event_id] == WMI_EVENT_ID_INVALID) {
		qdf_print("%s: Event id %d is unavailable\n",
				 __func__, event_id);
		return QDF_STATUS_E_FAILURE;
	}
	evt_id = wmi_handle->wmi_events[event_id];
#else
	evt_id = event_id;
#endif

	idx = wmi_unified_get_event_handler_ix(wmi_handle, evt_id);
	if (idx == -1) {
		qdf_print("%s : event handler is not registered: evt id 0x%x\n",
		       __func__, evt_id);
		return QDF_STATUS_E_FAILURE;
	}
	wmi_handle->event_handler[idx] = NULL;
	wmi_handle->event_id[idx] = 0;
	--wmi_handle->max_event_idx;
	wmi_handle->event_handler[idx] =
		wmi_handle->event_handler[wmi_handle->max_event_idx];
	wmi_handle->event_id[idx] =
		wmi_handle->event_id[wmi_handle->max_event_idx];

	return 0;
}

/**
 * wmi_process_fw_event_default_ctx() - process in default caller context
 * @wmi_handle: handle to wmi
 * @htc_packet: pointer to htc packet
 * @exec_ctx: execution context for wmi fw event
 *
 * Event process by below function will be in default caller context.
 * wmi internally provides rx work thread processing context.
 *
 * Return: none
 */
static void wmi_process_fw_event_default_ctx(struct wmi_unified *wmi_handle,
		       HTC_PACKET *htc_packet, uint8_t exec_ctx)
{
	wmi_buf_t evt_buf;
	evt_buf = (wmi_buf_t) htc_packet->pPktContext;

#ifdef WMI_NON_TLV_SUPPORT
	wmi_handle->rx_ops.wma_process_fw_event_handler_cbk
		(wmi_handle->scn_handle, evt_buf, exec_ctx);
#else
	wmi_handle->rx_ops.wma_process_fw_event_handler_cbk(wmi_handle,
					 evt_buf, exec_ctx);
#endif

	return;
}

/**
 * wmi_process_fw_event_worker_thread_ctx() - process in worker thread context
 * @wmi_handle: handle to wmi
 * @htc_packet: pointer to htc packet
 *
 * Event process by below function will be in worker thread context.
 * Use this method for events which are not critical and not
 * handled in protocol stack.
 *
 * Return: none
 */
static void wmi_process_fw_event_worker_thread_ctx
		(struct wmi_unified *wmi_handle, HTC_PACKET *htc_packet)
{
	wmi_buf_t evt_buf;
	uint32_t id;
	uint8_t *data;

	evt_buf = (wmi_buf_t) htc_packet->pPktContext;
	id = WMI_GET_FIELD(qdf_nbuf_data(evt_buf), WMI_CMD_HDR, COMMANDID);
	data = qdf_nbuf_data(evt_buf);

#ifdef WMI_INTERFACE_EVENT_LOGGING
	qdf_spin_lock_bh(&wmi_handle->wmi_record_lock);
	/* Exclude 4 bytes of TLV header */
	WMI_RX_EVENT_RECORD(id, ((uint8_t *) data + 4));
	qdf_spin_unlock_bh(&wmi_handle->wmi_record_lock);
#endif
	qdf_spin_lock_bh(&wmi_handle->eventq_lock);
	qdf_nbuf_queue_add(&wmi_handle->event_queue, evt_buf);
	qdf_spin_unlock_bh(&wmi_handle->eventq_lock);
	schedule_work(&wmi_handle->rx_event_work);
	return;
}

/**
 * wmi_control_rx() - process fw events callbacks
 * @ctx: handle to wmi
 * @htc_packet: pointer to htc packet
 *
 * Return: none
 */
void wmi_control_rx(void *ctx, HTC_PACKET *htc_packet)
{
	struct wmi_unified *wmi_handle = (struct wmi_unified *)ctx;
	wmi_buf_t evt_buf;
	uint32_t id;
	uint32_t idx = 0;
	enum wmi_rx_exec_ctx exec_ctx;

	evt_buf = (wmi_buf_t) htc_packet->pPktContext;
	id = WMI_GET_FIELD(qdf_nbuf_data(evt_buf), WMI_CMD_HDR, COMMANDID);
	idx = wmi_unified_get_event_handler_ix(wmi_handle, id);
	if (qdf_unlikely(idx == A_ERROR)) {
		qdf_print
		("%s :event handler is not registered: event id 0x%x\n",
			__func__, id);
		qdf_nbuf_free(evt_buf);
		return;
	}
	qdf_spin_lock_bh(&wmi_handle->ctx_lock);
	exec_ctx = wmi_handle->ctx[idx];
	qdf_spin_unlock_bh(&wmi_handle->ctx_lock);

	if (exec_ctx == WMI_RX_WORK_CTX) {
		wmi_process_fw_event_worker_thread_ctx
					(wmi_handle, htc_packet);
	} else if (exec_ctx > WMI_RX_WORK_CTX) {
		wmi_process_fw_event_default_ctx
					(wmi_handle, htc_packet, exec_ctx);
	} else {
		qdf_print("%s :Invalid event context %d\n", __func__, exec_ctx);
		qdf_nbuf_free(evt_buf);
	}

}

/**
 * wmi_process_fw_event() - process any fw event
 * @wmi_handle: wmi handle
 * @evt_buf: fw event buffer
 *
 * This function process fw event in caller context
 *
 * Return: none
 */
void wmi_process_fw_event(struct wmi_unified *wmi_handle, wmi_buf_t evt_buf)
{
	__wmi_control_rx(wmi_handle, evt_buf);
}

/**
 * __wmi_control_rx() - process serialize wmi event callback
 * @wmi_handle: wmi handle
 * @evt_buf: fw event buffer
 *
 * Return: none
 */
void __wmi_control_rx(struct wmi_unified *wmi_handle, wmi_buf_t evt_buf)
{
	uint32_t id;
	uint8_t *data;
	uint32_t len;
	void *wmi_cmd_struct_ptr = NULL;
#ifndef WMI_NON_TLV_SUPPORT
	int tlv_ok_status = 0;
#endif
	uint32_t idx = 0;

	id = WMI_GET_FIELD(qdf_nbuf_data(evt_buf), WMI_CMD_HDR, COMMANDID);

	if (qdf_nbuf_pull_head(evt_buf, sizeof(WMI_CMD_HDR)) == NULL)
		goto end;

	data = qdf_nbuf_data(evt_buf);
	len = qdf_nbuf_len(evt_buf);

#ifndef WMI_NON_TLV_SUPPORT
	if (wmi_handle->target_type == WMI_TLV_TARGET) {
		/* Validate and pad(if necessary) the TLVs */
		tlv_ok_status =
			wmitlv_check_and_pad_event_tlvs(wmi_handle->scn_handle,
							data, len, id,
							&wmi_cmd_struct_ptr);
		if (tlv_ok_status != 0) {
			QDF_TRACE(QDF_MODULE_ID_WMI, QDF_TRACE_LEVEL_ERROR,
				"%s: Error: id=0x%d, wmitlv check status=%d\n",
				__func__, id, tlv_ok_status);
			goto end;
		}
	}
#endif

	idx = wmi_unified_get_event_handler_ix(wmi_handle, id);
	if (idx == A_ERROR) {
		QDF_TRACE(QDF_MODULE_ID_WMI, QDF_TRACE_LEVEL_ERROR,
		   "%s : event handler is not registered: event id 0x%x\n",
			__func__, id);
		goto end;
	}
#ifdef WMI_INTERFACE_EVENT_LOGGING
	qdf_spin_lock_bh(&wmi_handle->wmi_record_lock);
	/* Exclude 4 bytes of TLV header */
	if (id == WMI_MGMT_TX_COMPLETION_EVENTID) {
		WMI_MGMT_EVENT_RECORD(id, ((uint8_t *) data + 4));
	} else {
		WMI_EVENT_RECORD(id, ((uint8_t *) data + 4));
	}
	qdf_spin_unlock_bh(&wmi_handle->wmi_record_lock);
#endif
	/* Call the WMI registered event handler */
	if (wmi_handle->target_type == WMI_TLV_TARGET)
		wmi_handle->event_handler[idx] (wmi_handle->scn_handle,
			wmi_cmd_struct_ptr, len);
	else
		wmi_handle->event_handler[idx] (wmi_handle->scn_handle,
			data, len);

end:
	/* Free event buffer and allocated event tlv */
#ifndef WMI_NON_TLV_SUPPORT
	if (wmi_handle->target_type == WMI_TLV_TARGET)
		wmitlv_free_allocated_event_tlvs(id, &wmi_cmd_struct_ptr);
#endif
	qdf_nbuf_free(evt_buf);

}

/**
 * wmi_rx_event_work() - process rx event in rx work queue context
 * @work: rx work queue struct
 *
 * This function process any fw event to serialize it through rx worker thread.
 *
 * Return: none
 */
void wmi_rx_event_work(struct work_struct *work)
{
	struct wmi_unified *wmi = container_of(work, struct wmi_unified,
					       rx_event_work);
	wmi_buf_t buf;

	qdf_spin_lock_bh(&wmi->eventq_lock);
	buf = qdf_nbuf_queue_remove(&wmi->event_queue);
	qdf_spin_unlock_bh(&wmi->eventq_lock);
	while (buf) {
		__wmi_control_rx(wmi, buf);
		qdf_spin_lock_bh(&wmi->eventq_lock);
		buf = qdf_nbuf_queue_remove(&wmi->event_queue);
		qdf_spin_unlock_bh(&wmi->eventq_lock);
	}
}

#ifdef FEATURE_RUNTIME_PM
/**
 * wmi_runtime_pm_init() - initialize runtime pm wmi variables
 * @wmi_handle: wmi context
 */
static void wmi_runtime_pm_init(struct wmi_unified *wmi_handle)
{
	qdf_atomic_init(&wmi_handle->runtime_pm_inprogress);
}

/**
 * wmi_set_runtime_pm_inprogress() - set runtime pm progress flag
 * @wmi_handle: wmi context
 * @val: runtime pm progress flag
 */
void wmi_set_runtime_pm_inprogress(wmi_unified_t wmi_handle, A_BOOL val)
{
	qdf_atomic_set(&wmi_handle->runtime_pm_inprogress, val);
}

/**
 * wmi_get_runtime_pm_inprogress() - get runtime pm progress flag
 * @wmi_handle: wmi context
 */
inline bool wmi_get_runtime_pm_inprogress(wmi_unified_t wmi_handle)
{
	return qdf_atomic_read(&wmi_handle->runtime_pm_inprogress);
}
#else
static void wmi_runtime_pm_init(struct wmi_unified *wmi_handle)
{
}
#endif

/**
 * wmi_unified_attach() -  attach for unified WMI
 * @scn_handle: handle to SCN
 * @osdev: OS device context
 * @target_type: TLV or not-TLV based target
 * @use_cookie: cookie based allocation enabled/disabled
 * @ops: umac rx callbacks
 *
 * @Return: wmi handle.
 */
void *wmi_unified_attach(void *scn_handle,
			 osdev_t osdev, enum wmi_target_type target_type,
			 bool use_cookie, struct wmi_rx_ops *rx_ops)
{
	struct wmi_unified *wmi_handle;

#ifndef WMI_NON_TLV_SUPPORT
	wmi_handle =
		(struct wmi_unified *)os_malloc(NULL,
				sizeof(struct wmi_unified),
				GFP_ATOMIC);
#else
	wmi_handle =
		(struct wmi_unified *) qdf_mem_malloc(
			sizeof(struct wmi_unified));
#endif
	if (wmi_handle == NULL) {
		qdf_print("allocation of wmi handle failed %zu\n",
			sizeof(struct wmi_unified));
		return NULL;
	}
	OS_MEMZERO(wmi_handle, sizeof(struct wmi_unified));
	wmi_handle->scn_handle = scn_handle;
	qdf_atomic_init(&wmi_handle->pending_cmds);
	qdf_atomic_init(&wmi_handle->is_target_suspended);
	wmi_runtime_pm_init(wmi_handle);
	qdf_spinlock_create(&wmi_handle->eventq_lock);
	qdf_nbuf_queue_init(&wmi_handle->event_queue);
#ifdef CONFIG_CNSS
	cnss_init_work(&wmi_handle->rx_event_work, wmi_rx_event_work);
#else
	INIT_WORK(&wmi_handle->rx_event_work, wmi_rx_event_work);
#endif
#ifdef WMI_INTERFACE_EVENT_LOGGING
	qdf_spinlock_create(&wmi_handle->wmi_record_lock);
#endif
	/* Attach mc_thread context processing function */
	wmi_handle->rx_ops.wma_process_fw_event_handler_cbk =
				rx_ops->wma_process_fw_event_handler_cbk;
	wmi_handle->target_type = target_type;
	if (target_type == WMI_TLV_TARGET)
		wmi_tlv_attach(wmi_handle);
	else
		wmi_non_tlv_attach(wmi_handle);
	/* Assign target cookie capablity */
	wmi_handle->use_cookie = use_cookie;
	wmi_handle->osdev = osdev;
	wmi_handle->wmi_stopinprogress = 0;
	qdf_spinlock_create(&wmi_handle->ctx_lock);

	return wmi_handle;
}

/**
 * wmi_unified_detach() -  detach for unified WMI
 *
 * @wmi_handle  : handle to wmi.
 *
 * @Return: none.
 */
void wmi_unified_detach(struct wmi_unified *wmi_handle)
{
	wmi_buf_t buf;

	cancel_work_sync(&wmi_handle->rx_event_work);
	qdf_spin_lock_bh(&wmi_handle->eventq_lock);
	buf = qdf_nbuf_queue_remove(&wmi_handle->event_queue);
	while (buf) {
		qdf_nbuf_free(buf);
		buf = qdf_nbuf_queue_remove(&wmi_handle->event_queue);
	}
	qdf_spin_unlock_bh(&wmi_handle->eventq_lock);
	qdf_spinlock_destroy(&wmi_handle->ctx_lock);
	if (wmi_handle != NULL) {
		OS_FREE(wmi_handle);
		wmi_handle = NULL;
	}
}

/**
 * wmi_unified_remove_work() - detach for WMI work
 * @wmi_handle: handle to WMI
 *
 * A function that does not fully detach WMI, but just remove work
 * queue items associated with it. This is used to make sure that
 * before any other processing code that may destroy related contexts
 * (HTC, etc), work queue processing on WMI has already been stopped.
 *
 * Return: None
 */
void
wmi_unified_remove_work(struct wmi_unified *wmi_handle)
{
	wmi_buf_t buf;

	QDF_TRACE(QDF_MODULE_ID_WMI, QDF_TRACE_LEVEL_INFO,
		"Enter: %s", __func__);
	cancel_work_sync(&wmi_handle->rx_event_work);
	qdf_spin_lock_bh(&wmi_handle->eventq_lock);
	buf = qdf_nbuf_queue_remove(&wmi_handle->event_queue);
	while (buf) {
		qdf_nbuf_free(buf);
		buf = qdf_nbuf_queue_remove(&wmi_handle->event_queue);
	}
	qdf_spin_unlock_bh(&wmi_handle->eventq_lock);
	QDF_TRACE(QDF_MODULE_ID_WMI, QDF_TRACE_LEVEL_INFO,
		"Done: %s", __func__);
}

/**
 * wmi_htc_tx_complete() - Process htc tx completion
 *
 * @ctx: handle to wmi
 * @htc_packet: pointer to htc packet
 *
 * @Return: none.
 */
void wmi_htc_tx_complete(void *ctx, HTC_PACKET *htc_pkt)
{
	struct wmi_unified *wmi_handle = (struct wmi_unified *)ctx;
	wmi_buf_t wmi_cmd_buf = GET_HTC_PACKET_NET_BUF_CONTEXT(htc_pkt);

#ifdef WMI_INTERFACE_EVENT_LOGGING
	uint32_t cmd_id;
#endif

	ASSERT(wmi_cmd_buf);
#ifdef WMI_INTERFACE_EVENT_LOGGING
	cmd_id = WMI_GET_FIELD(qdf_nbuf_data(wmi_cmd_buf),
			       WMI_CMD_HDR, COMMANDID);

#ifdef QCA_WIFI_3_0_EMU
	qdf_print
		("\nSent WMI command:%s command_id:0x%x over dma and recieved tx complete interupt\n",
		 get_wmi_cmd_string(cmd_id), cmd_id);
#endif

	qdf_spin_lock_bh(&wmi_handle->wmi_record_lock);
	/* Record 16 bytes of WMI cmd tx complete data
	   - exclude TLV and WMI headers */
	if (cmd_id == WMI_MGMT_TX_SEND_CMDID) {
		WMI_MGMT_COMMAND_TX_CMP_RECORD(cmd_id,
				((uint32_t *) qdf_nbuf_data(wmi_cmd_buf) + 2));
	} else {
		WMI_COMMAND_TX_CMP_RECORD(cmd_id,
				((uint32_t *) qdf_nbuf_data(wmi_cmd_buf) + 2));
	}

	qdf_spin_unlock_bh(&wmi_handle->wmi_record_lock);
#endif
	qdf_nbuf_free(wmi_cmd_buf);
	qdf_mem_free(htc_pkt);
	qdf_atomic_dec(&wmi_handle->pending_cmds);
}

/**
 * wmi_get_host_credits() -  WMI API to get updated host_credits
 *
 * @wmi_handle: handle to WMI.
 *
 * @Return: updated host_credits.
 */
int
wmi_unified_connect_htc_service(struct wmi_unified *wmi_handle,
				void *htc_handle)
{

	int status;
	HTC_SERVICE_CONNECT_RESP response;
	HTC_SERVICE_CONNECT_REQ connect;

	OS_MEMZERO(&connect, sizeof(connect));
	OS_MEMZERO(&response, sizeof(response));

	/* meta data is unused for now */
	connect.pMetaData = NULL;
	connect.MetaDataLength = 0;
	/* these fields are the same for all service endpoints */
	connect.EpCallbacks.pContext = wmi_handle;
	connect.EpCallbacks.EpTxCompleteMultiple =
		NULL /* Control path completion ar6000_tx_complete */;
	connect.EpCallbacks.EpRecv = wmi_control_rx /* Control path rx */;
	connect.EpCallbacks.EpRecvRefill = NULL /* ar6000_rx_refill */;
	connect.EpCallbacks.EpSendFull = NULL /* ar6000_tx_queue_full */;
	connect.EpCallbacks.EpTxComplete =
		wmi_htc_tx_complete /* ar6000_tx_queue_full */;

	/* connect to control service */
	connect.service_id = WMI_CONTROL_SVC;
	status = htc_connect_service(htc_handle, &connect,
				&response);

	if (status != EOK) {
		qdf_print
			("Failed to connect to WMI CONTROL service status:%d \n",
			status);
		return status;
	}
	wmi_handle->wmi_endpoint_id = response.Endpoint;
	wmi_handle->htc_handle = htc_handle;
	wmi_handle->max_msg_len = response.MaxMsgLength;

	return EOK;
}

/**
 * wmi_get_host_credits() -  WMI API to get updated host_credits
 *
 * @wmi_handle: handle to WMI.
 *
 * @Return: updated host_credits.
 */
int wmi_get_host_credits(wmi_unified_t wmi_handle)
{
	int host_credits = 0;

	htc_get_control_endpoint_tx_host_credits(wmi_handle->htc_handle,
						 &host_credits);
	return host_credits;
}

/**
 * wmi_get_pending_cmds() - WMI API to get WMI Pending Commands in the HTC
 *                          queue
 *
 * @wmi_handle: handle to WMI.
 *
 * @Return: Pending Commands in the HTC queue.
 */
int wmi_get_pending_cmds(wmi_unified_t wmi_handle)
{
	return qdf_atomic_read(&wmi_handle->pending_cmds);
}

/**
 * wmi_set_target_suspend() -  WMI API to set target suspend state
 *
 * @wmi_handle: handle to WMI.
 * @val: suspend state boolean.
 *
 * @Return: none.
 */
void wmi_set_target_suspend(wmi_unified_t wmi_handle, A_BOOL val)
{
	qdf_atomic_set(&wmi_handle->is_target_suspended, val);
}

#ifdef WMI_NON_TLV_SUPPORT
/**
 * API to flush all the previous packets  associated with the wmi endpoint
 *
 * @param wmi_handle      : handle to WMI.
 */
void
wmi_flush_endpoint(wmi_unified_t wmi_handle)
{
	htc_flush_endpoint(wmi_handle->htc_handle,
		wmi_handle->wmi_endpoint_id, 0);
}

/**
 * generic function to block unified WMI command
 * @param wmi_handle      : handle to WMI.
 * @return 0  on success and -ve on failure.
 */
int
wmi_stop(wmi_unified_t wmi_handle)
{
	QDF_TRACE(QDF_MODULE_ID_WMI, QDF_TRACE_LEVEL_INFO,
			"WMI Stop\n");
	wmi_handle->wmi_stopinprogress = 1;
	return 0;
}
#endif