qcacmn: Introduce QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON
This acts as an event from the host driver to the user space to notify
the driver specific reason for a disconnection. The host driver
initiates the disconnection for various scenarios (beacon miss, Tx
Failures, gateway unreachability, etc.) and the reason codes from
cfg80211_disconnected() do not carry these driver specific reason codes.
Host drivers should trigger this event immediately prior to triggering
cfg80211_disconnected() to allow the user space to correlate the driver
specific reason code with the disconnect indication.
Change-Id: I6337c02a3508c7ce282f0e3e947d7592e8550308
CRs-Fixed: 2624841
diff --git a/os_if/linux/qca_vendor.h b/os_if/linux/qca_vendor.h
index 637e4ca..ca88971 100644
--- a/os_if/linux/qca_vendor.h
+++ b/os_if/linux/qca_vendor.h
@@ -381,6 +381,18 @@
* is used to update the information about the station from the driver to
* userspace. Uses attributes from enum
* qca_wlan_vendor_attr_update_sta_info.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON: This acts as an event.
+ * The host driver initiates the disconnection for scenarios such as beacon
+ * miss, NUD failure, peer kick out, etc. The disconnection indication
+ * through cfg80211_disconnected() expects the reason codes from enum
+ * ieee80211_reasoncode which does not signify these various reasons why
+ * the driver has triggered the disconnection. This event will be used to
+ * send the driver specific reason codes by the host driver to userspace.
+ * Host drivers should trigger this event and pass the respective reason
+ * code immediately prior to triggering cfg80211_disconnected(). The
+ * attributes used with this event are defined in enum
+ * qca_wlan_vendor_attr_driver_disconnect_reason.
*/
enum qca_nl80211_vendor_subcmds {
@@ -602,6 +614,7 @@
QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE = 185,
QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS_EVENT = 187,
QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO = 188,
+ QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON = 189,
};
enum qca_wlan_vendor_tos {
@@ -8350,4 +8363,102 @@
QCA_VENDOR_ATTR_BTC_CHAIN_MODE_LAST - 1,
};
+/**
+ * enum qca_disconnect_reason_codes - Specifies driver disconnect reason codes.
+ * Used when the driver triggers the STA to disconnect from the AP.
+ *
+ * @QCA_DISCONNECT_REASON_UNSPECIFIED: The host driver triggered the
+ * disconnection with the AP due to unspecified reasons.
+ *
+ * @QCA_DISCONNECT_REASON_INTERNAL_ROAM_FAILURE: The host driver triggered the
+ * disconnection with the AP due to a roaming failure. This roaming is triggered
+ * internally (host driver/firmware).
+ *
+ * @QCA_DISCONNECT_REASON_EXTERNAL_ROAM_FAILURE: The driver disconnected from
+ * the AP when the user/external triggered roaming fails.
+ *
+ * @QCA_DISCONNECT_REASON_GATEWAY_REACHABILITY_FAILURE: This reason code is used
+ * by the host driver whenever gateway reachability failure is detected and the
+ * driver disconnects with AP.
+ *
+ * @QCA_DISCONNECT_REASON_UNSUPPORTED_CHANNEL_CSA: The driver disconnected from
+ * the AP on a channel switch announcement from it with an unsupported channel.
+ *
+ * @QCA_DISCONNECT_REASON_OPER_CHANNEL_DISABLED_INDOOR: On a concurrent AP start
+ * with indoor channels disabled and if the STA is connected on one of these
+ * disabled channels, the host driver disconnected the STA with this reason
+ * code.
+ *
+ * @QCA_DISCONNECT_REASON_OPER_CHANNEL_USER_DISABLED: Disconnection due to an
+ * explicit request from the user to disable the current operating channel.
+ *
+ * @QCA_DISCONNECT_REASON_DEVICE_RECOVERY: STA disconnected from the AP due to
+ * the internal host driver/firmware recovery.
+ *
+ * @QCA_DISCONNECT_REASON_KEY_TIMEOUT: The driver triggered the disconnection on
+ * a timeout for the key installations from the user space.
+ *
+ * @QCA_DISCONNECT_REASON_OPER_CHANNEL_BAND_CHANGE: The dDriver disconnected the
+ * STA on a band change request from the user space to a different band from the
+ * current operation channel/band.
+ *
+ * @QCA_DISCONNECT_REASON_IFACE_DOWN: The STA disconnected from the AP on an
+ * interface down trigger from the user space.
+ *
+ * @QCA_DISCONNECT_REASON_PEER_XRETRY_FAIL: The host driver disconnected the
+ * STA on getting continuous transmission failures for multiple Data frames.
+ *
+ * @QCA_DISCONNECT_REASON_PEER_INACTIVITY: The STA does a keep alive
+ * notification to the AP by transmitting NULL/G-ARP frames. This disconnection
+ * represents inactivity from AP on such transmissions.
+
+ * @QCA_DISCONNECT_REASON_SA_QUERY_TIMEOUT: This reason code is used on
+ * disconnection when SA Query times out (AP does not respond to SA Query).
+ *
+ * @QCA_DISCONNECT_REASON_BEACON_MISS_FAILURE: The host driver disconnected the
+ * STA on missing the beacons continuously from the AP.
+ *
+ * @QCA_DISCONNECT_REASON_CHANNEL_SWITCH_FAILURE: Disconnection due to STA not
+ * able to move to the channel mentioned by the AP in CSA.
+ *
+ * @QCA_DISCONNECT_REASON_USER_TRIGGERED: User triggered disconnection.
+ */
+enum qca_disconnect_reason_codes {
+ QCA_DISCONNECT_REASON_UNSPECIFIED = 0,
+ QCA_DISCONNECT_REASON_INTERNAL_ROAM_FAILURE = 1,
+ QCA_DISCONNECT_REASON_EXTERNAL_ROAM_FAILURE = 2,
+ QCA_DISCONNECT_REASON_GATEWAY_REACHABILITY_FAILURE = 3,
+ QCA_DISCONNECT_REASON_UNSUPPORTED_CHANNEL_CSA = 4,
+ QCA_DISCONNECT_REASON_OPER_CHANNEL_DISABLED_INDOOR = 5,
+ QCA_DISCONNECT_REASON_OPER_CHANNEL_USER_DISABLED = 6,
+ QCA_DISCONNECT_REASON_DEVICE_RECOVERY = 7,
+ QCA_DISCONNECT_REASON_KEY_TIMEOUT = 8,
+ QCA_DISCONNECT_REASON_OPER_CHANNEL_BAND_CHANGE = 9,
+ QCA_DISCONNECT_REASON_IFACE_DOWN = 10,
+ QCA_DISCONNECT_REASON_PEER_XRETRY_FAIL = 11,
+ QCA_DISCONNECT_REASON_PEER_INACTIVITY = 12,
+ QCA_DISCONNECT_REASON_SA_QUERY_TIMEOUT = 13,
+ QCA_DISCONNECT_REASON_BEACON_MISS_FAILURE = 14,
+ QCA_DISCONNECT_REASON_CHANNEL_SWITCH_FAILURE = 15,
+ QCA_DISCONNECT_REASON_USER_TRIGGERED = 16,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_driver_disconnect_reason - Defines attributes
+ * used by %QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASCON_CODE: u32 attribute.
+ * This attribute represents the driver specific reason codes (local
+ * driver/firmware initiated reasons for disconnection) defined
+ * in enum qca_disconnect_reason_codes.
+ */
+enum qca_wlan_vendor_attr_driver_disconnect_reason {
+ QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASCON_CODE = 1,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_MAX =
+ QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_AFTER_LAST - 1,
+};
#endif