qcacmn: Add GET_STATION_REMOTE vendor subcmd
qcacld-2.0 to qcacld-3.0 propagation
Add QCA_WLAN_VENDOR_ATTR_GET_STATION_REMOTE sub command for peer
station of SoftAP information stats feature, and add related
attributions of this command.
Change-Id: I516d459be2e6556a7e33d285c3ffeacc1ab0f9a5
CRs-Fixed: 2075888
diff --git a/os_if/linux/qca_vendor.h b/os_if/linux/qca_vendor.h
index 9bb0174..369f9cf 100644
--- a/os_if/linux/qca_vendor.h
+++ b/os_if/linux/qca_vendor.h
@@ -449,12 +449,14 @@
* @QCA_WLAN_VENDOR_ATTR_GET_STATION_INVALID: Invalid attribute
* @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO: bss info
* @QCA_WLAN_VENDOR_ATTR_GET_STATION_ASSOC_FAIL_REASON: assoc fail reason
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_REMOTE: remote station info
* @QCA_WLAN_VENDOR_ATTR_GET_STATION_AFTER_LAST: After last
*/
enum qca_wlan_vendor_attr_get_station {
QCA_WLAN_VENDOR_ATTR_GET_STATION_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO,
QCA_WLAN_VENDOR_ATTR_GET_STATION_ASSOC_FAIL_REASON,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_REMOTE,
/* keep last */
QCA_WLAN_VENDOR_ATTR_GET_STATION_AFTER_LAST,
@@ -546,6 +548,35 @@
* @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_ASSOC_FAIL_REASON:
* Status Code Corresponding to the Association Failure.
* Unsigned 32 bit value.
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_MAX_PHY_RATE:
+ * Max phy rate of remote station
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_PACKETS:
+ * TX packets to remote station
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_BYTES:
+ * TX bytes to remote station
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_PACKETS:
+ * RX packets from remote station
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_BYTES:
+ * RX bytes from remote station
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_LAST_TX_RATE:
+ * Last TX rate with remote station
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_LAST_RX_RATE:
+ * Last RX rate with remote station
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_WMM:
+ * Remote station enable/disable WMM
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_SUPPORTED_MODE:
+ * Remote staion connection mode
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_AMPDU:
+ * Remote station AMPDU enable/disable
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_STBC:
+ * Remote station TX Space-time block coding enable/disable
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_STBC:
+ * Remote station RX Space-time block coding enable/disable
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_CH_WIDTH:
+ * Remote station channel width
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_SGI_ENABLE:
+ * Remote station short GI enable/disable
+ * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_PAD: Attribute type for padding
* @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AFTER_LAST: After last
*/
enum qca_wlan_vendor_attr_get_station_info {
@@ -559,32 +590,29 @@
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_HT_OPERATION,
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_VHT_OPERATION,
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_ASSOC_FAIL_REASON,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_MAX_PHY_RATE,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_PACKETS,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_BYTES,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_PACKETS,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_BYTES,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_LAST_TX_RATE,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_LAST_RX_RATE,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_WMM,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_SUPPORTED_MODE,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_AMPDU,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_STBC,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_STBC,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_CH_WIDTH,
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_SGI_ENABLE,
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4, 7, 0))
+ QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_PAD,
+#endif
/* keep last */
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_MAX =
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AFTER_LAST - 1,
};
-/* define short names for get station info attributes */
-#define LINK_INFO_STANDARD_NL80211_ATTR \
- QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_LINK_STANDARD_NL80211_ATTR
-#define AP_INFO_STANDARD_NL80211_ATTR \
- QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AP_STANDARD_NL80211_ATTR
-#define INFO_ROAM_COUNT \
- QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_ROAM_COUNT
-#define INFO_AKM \
- QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AKM
-#define WLAN802_11_MODE \
- QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_802_11_MODE
-#define AP_INFO_HS20_INDICATION \
- QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AP_HS20_INDICATION
-#define HT_OPERATION \
- QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_HT_OPERATION
-#define VHT_OPERATION \
- QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_VHT_OPERATION
-#define INFO_ASSOC_FAIL_REASON \
- QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_ASSOC_FAIL_REASON
-
/**
* enum qca_nl80211_vendor_subcmds_index - vendor sub commands index
*