qcacmn: add vendor subcommand QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG
This subcommand is used to update zigbee state and specified wlan durations
to enhance success ratio of zigbee joining network.
NL attributes qca_mpta_helper_vendor_attr is used to deliver the parameters
to host driver.
Change-Id: I7ec82e11fa3aaea88f20e1c04c464153549bf44c
CRs-Fixed: 2413320
diff --git a/os_if/linux/qca_vendor.h b/os_if/linux/qca_vendor.h
index db7c91f..4cb4fd9 100644
--- a/os_if/linux/qca_vendor.h
+++ b/os_if/linux/qca_vendor.h
@@ -284,6 +284,13 @@
* enum qca_wlan_vendor_attr_peer_stats_cache_params.
* QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_DATA attribute is expected to be
* sent as event from host driver.
+ * @QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG: This sub command is used to
+ * improve the success rate of Zigbee joining network.
+ * Due to PTA master limitation, zigbee joining network success rate is
+ * low while wlan is working. Wlan host driver need to configure some
+ * parameters including Zigbee state and specific WLAN periods to enhance
+ * PTA master. All this parameters are delivered by the NetLink attributes
+ * defined in "enum qca_mpta_helper_vendor_attr".
*/
enum qca_nl80211_vendor_subcmds {
@@ -494,6 +501,7 @@
QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT = 174,
QCA_NL80211_VENDOR_SUBCMD_GET_FW_STATE = 177,
QCA_NL80211_VENDOR_SUBCMD_PEER_STATS_CACHE_FLUSH = 178,
+ QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG = 179,
};
enum qca_wlan_vendor_tos {
@@ -6708,4 +6716,94 @@
QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_MAX =
QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_LAST - 1
};
+
+/**
+ * enum qca_mpta_helper_attr_zigbee_state - current states of zegbee.
+ * this enum defines all the possible state of zigbee, which can be
+ * delivered by NetLink attribute QCA_MPTA_HELPER_VENDOR_ATTR_ZIGBEE_STATE.
+ *
+ * @ZIGBEE_IDLE: zigbee in idle state
+ * @ZIGBEE_FORM_NETWORK: zibee forming network
+ * @ZIGBEE_WAIT_JOIN: zigbee waiting for joining network
+ * @ZIGBEE_JOIN: zigbee joining network
+ * @ZIGBEE_NETWORK_UP: zigbee network is up
+ * @ZIGBEE_HMI: zigbee in HMI mode
+ */
+enum qca_mpta_helper_attr_zigbee_state {
+ ZIGBEE_IDLE = 0,
+ ZIGBEE_FORM_NETWORK = 1,
+ ZIGBEE_WAIT_JOIN = 2,
+ ZIGBEE_JOIN = 3,
+ ZIGBEE_NETWORK_UP = 4,
+ ZIGBEE_HMI = 5,
+};
+
+/**
+ * enum qca_mpta_helper_vendor_attr - used for NL attributes sent by
+ * vendor sub-command QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG.
+ */
+enum qca_mpta_helper_vendor_attr {
+ QCA_MPTA_HELPER_VENDOR_ATTR_INVALID = 0,
+ /* Optional attribute used to update zigbee state.
+ * enum qca_mpta_helper_attr_zigbee_state.
+ * NLA_U32 attribute.
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_ZIGBEE_STATE = 1,
+ /* Optional attribute used to configure wlan duration for Shape-OCS
+ * during interrupt.
+ * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_INT_NON_WLAN_DURATION.
+ * Value range 0 ~ 300 (ms).
+ * NLA_U32 attribute.
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_INT_WLAN_DURATION = 2,
+ /* Optional attribute used to configure non wlan duration for Shape-OCS
+ * during interrupt.
+ * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_INT_WLAN_DURATION.
+ * Value range 0 ~ 300 (ms).
+ * NLA_U32 attribute.
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_INT_NON_WLAN_DURATION = 3,
+ /* Optional attribute used to configure wlan duration for Shape-OCS
+ * monitor period.
+ * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_MON_NON_WLAN_DURATION.
+ * Value range 0 ~ 300 (ms)
+ * NLA_U32 attribute
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_MON_WLAN_DURATION = 4,
+ /* Optional attribute used to configure non wlan duration for Shape-OCS
+ * monitor period.
+ * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_MON_WLAN_DURATION.
+ * Value range 0 ~ 300 (ms)
+ * NLA_U32 attribute
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_MON_NON_WLAN_DURATION = 5,
+ /* Optional attribute used to configure ocs interrupt duration.
+ * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_MON_OCS_DURATION.
+ * Value range 1000 ~ 20000 (ms)
+ * NLA_U32 attribute
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_INT_OCS_DURATION = 6,
+ /* Optional attribute used to configure ocs monitor duration.
+ * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_INT_OCS_DURATION.
+ * Value range 1000 ~ 20000 (ms)
+ * NLA_U32 attribute
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_MON_OCS_DURATION = 7,
+ /* Optional attribute used to notify wlan FW current zigbee channel.
+ * Value range 11 ~ 26
+ * NLA_U32 attribute
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_ZIGBEE_CHAN = 8,
+ /* Optional attribute used to configure wlan mute duration.
+ * Value range 0 ~ 400 (ms)
+ * NLA_U32 attribute
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_WLAN_MUTE_DURATION = 9,
+
+ /* keep last */
+ QCA_MPTA_HELPER_VENDOR_ATTR_AFTER_LAST,
+ QCA_MPTA_HELPER_VENDOR_ATTR_MAX =
+ QCA_MPTA_HELPER_VENDOR_ATTR_AFTER_LAST - 1
+};
+
#endif