qcacmn: Fix for removal of void pointer usage
Add changes to remove usage of void pointer for wmi_handle
Instead use an opaque pointer(set 2)
Change-Id: I06a89adaf15c6b398dbc901518aa83927b7ca16a
CRs-Fixed: 2479298
diff --git a/target_if/crypto/src/target_if_crypto.c b/target_if/crypto/src/target_if_crypto.c
index f549756..0b58c6a 100644
--- a/target_if/crypto/src/target_if_crypto.c
+++ b/target_if/crypto/src/target_if_crypto.c
@@ -118,7 +118,7 @@
struct cdp_peer *peer = NULL;
uint8_t peer_id;
uint8_t def_tx_idx;
- void *pdev_wmi_handle;
+ wmi_unified_t pdev_wmi_handle;
bool pairwise;
QDF_STATUS status;
diff --git a/target_if/dfs/src/target_if_dfs.c b/target_if/dfs/src/target_if_dfs.c
index f4be061..ad95057 100644
--- a/target_if/dfs/src/target_if_dfs.c
+++ b/target_if/dfs/src/target_if_dfs.c
@@ -285,7 +285,7 @@
bool dfs_phyerr_filter_offload)
{
QDF_STATUS status;
- void *wmi_handle;
+ wmi_unified_t wmi_handle;
if (!pdev) {
target_if_err("null pdev");
diff --git a/target_if/green_ap/src/target_if_green_ap.c b/target_if/green_ap/src/target_if_green_ap.c
index 3ecf935..56b70db 100644
--- a/target_if/green_ap/src/target_if_green_ap.c
+++ b/target_if/green_ap/src/target_if_green_ap.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2017-2018 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2017-2019 The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for
* any purpose with or without fee is hereby granted, provided that the
@@ -140,7 +140,7 @@
struct wlan_green_ap_egap_params *egap_params)
{
struct wlan_pdev_green_ap_ctx *green_ap_ctx;
- void *wmi_hdl;
+ wmi_unified_t wmi_hdl;
if (!pdev) {
green_ap_err("pdev context passed is NULL");
@@ -175,7 +175,7 @@
QDF_STATUS target_if_green_ap_set_ps_on_off(struct wlan_objmgr_pdev *pdev,
bool value, uint8_t pdev_id)
{
- void *wmi_hdl;
+ wmi_unified_t wmi_hdl;
if (!pdev) {
green_ap_err("pdev context passed is NULL");
diff --git a/target_if/init_deinit/inc/service_ready_util.h b/target_if/init_deinit/inc/service_ready_util.h
index a542a36..7e0be64 100644
--- a/target_if/init_deinit/inc/service_ready_util.h
+++ b/target_if/init_deinit/inc/service_ready_util.h
@@ -117,7 +117,8 @@
*
* Return: zero on successful population of fw_version command or failure flag
*/
-int init_deinit_populate_fw_version_cmd(void *wmi_handle, uint8_t *event);
+int
+init_deinit_populate_fw_version_cmd(wmi_unified_t wmi_handle, uint8_t *event);
/**
* init_deinit_populate_target_cap() - populate target cap
diff --git a/target_if/init_deinit/src/service_ready_util.c b/target_if/init_deinit/src/service_ready_util.c
index beac8bd..1e5d7b7 100644
--- a/target_if/init_deinit/src/service_ready_util.c
+++ b/target_if/init_deinit/src/service_ready_util.c
@@ -142,7 +142,8 @@
return 0;
}
-int init_deinit_populate_fw_version_cmd(void *wmi_handle, uint8_t *event)
+int init_deinit_populate_fw_version_cmd(wmi_unified_t wmi_handle,
+ uint8_t *event)
{
QDF_STATUS status;
diff --git a/target_if/wifi_pos/src/target_if_wifi_pos.c b/target_if/wifi_pos/src/target_if_wifi_pos.c
index dd0742e..239bd08 100644
--- a/target_if/wifi_pos/src/target_if_wifi_pos.c
+++ b/target_if/wifi_pos/src/target_if_wifi_pos.c
@@ -269,7 +269,7 @@
struct oem_data_req *req)
{
QDF_STATUS status;
- void *wmi_hdl = GET_WMI_HDL_FROM_PSOC(psoc);
+ wmi_unified_t wmi_hdl = GET_WMI_HDL_FROM_PSOC(psoc);
target_if_debug("Send oem data req to target");
@@ -564,7 +564,7 @@
{
uint8_t i;
QDF_STATUS status;
- void *wmi_hdl = GET_WMI_HDL_FROM_PSOC(psoc);
+ wmi_unified_t wmi_hdl = GET_WMI_HDL_FROM_PSOC(psoc);
wmi_oem_dma_ring_cfg_req_fixed_param cfg = {0};
if (!wmi_hdl) {
diff --git a/wmi/inc/wmi_unified_api.h b/wmi/inc/wmi_unified_api.h
index 4578fed..f8d8814 100644
--- a/wmi/inc/wmi_unified_api.h
+++ b/wmi/inc/wmi_unified_api.h
@@ -847,79 +847,271 @@
uint8_t mac_id);
#ifdef FEATURE_FW_LOG_PARSING
-QDF_STATUS wmi_unified_dbglog_cmd_send(void *wmi_hdl,
+/**
+ * wmi_unified_dbglog_cmd_send() - set debug log level
+ * @wmi_handle: handle to WMI.
+ * @param: pointer to hold dbglog level parameter
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_unified_dbglog_cmd_send(wmi_unified_t wmi_handle,
struct dbglog_params *param);
#else
static inline QDF_STATUS
-wmi_unified_dbglog_cmd_send(void *wmi_hdl,
+wmi_unified_dbglog_cmd_send(wmi_unified_t wmi_handle,
struct dbglog_params *param)
{
return QDF_STATUS_SUCCESS;
}
#endif
-QDF_STATUS wmi_mgmt_unified_cmd_send(void *wmi_hdl,
- struct wmi_mgmt_params *param);
+/**
+ * wmi_mgmt_unified_cmd_send() - management cmd over wmi layer
+ * @wmi_handle: handle to WMI.
+ * @param: pointer to hold mgmt cmd parameter
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_mgmt_unified_cmd_send(wmi_unified_t wmi_handle,
+ struct wmi_mgmt_params *param);
-QDF_STATUS wmi_offchan_data_tx_cmd_send(void *wmi_hdl,
- struct wmi_offchan_data_tx_params *param);
+/**
+ * wmi_offchan_data_tx_cmd_send() - Send offchan data tx cmd over wmi layer
+ * @wmi_handle: handle to WMI.
+ * @param: pointer to hold offchan data cmd parameter
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_offchan_data_tx_cmd_send(
+ wmi_unified_t wmi_handle,
+ struct wmi_offchan_data_tx_params *param);
-QDF_STATUS wmi_unified_modem_power_state(void *wmi_hdl,
- uint32_t param_value);
+/**
+ * wmi_unified_modem_power_state() - set modem power state to fw
+ * @wmi_handle: wmi handle
+ * @param_value: parameter value
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_unified_modem_power_state(wmi_unified_t wmi_handle,
+ uint32_t param_value);
-QDF_STATUS wmi_unified_set_sta_ps_mode(void *wmi_hdl,
- uint32_t vdev_id, uint8_t val);
+/**
+ * wmi_unified_set_sta_ps_mode() - set sta powersave params in fw
+ * @wmi_handle: wmi handle
+ * @vdev_id: vdev id
+ * @val: value
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure.
+ */
+QDF_STATUS wmi_unified_set_sta_ps_mode(wmi_unified_t wmi_handle,
+ uint32_t vdev_id,
+ uint8_t val);
+
+/**
+ * wmi_unified_set_sta_uapsd_auto_trig_cmd() - set uapsd auto trigger command
+ * @wmi_handle: wmi handle
+ * @param: uapsd cmd parameter strcture
+ *
+ * This function sets the trigger
+ * uapsd params such as service interval, delay interval
+ * and suspend interval which will be used by the firmware
+ * to send trigger frames periodically when there is no
+ * traffic on the transmit side.
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure.
+ */
QDF_STATUS
-wmi_unified_set_sta_uapsd_auto_trig_cmd(void *wmi_hdl,
- struct sta_uapsd_trig_params *param);
+wmi_unified_set_sta_uapsd_auto_trig_cmd(wmi_unified_t wmi_handle,
+ struct sta_uapsd_trig_params *param);
-QDF_STATUS wmi_unified_get_temperature(void *wmi_hdl);
+/**
+ * wmi_get_temperature() - get pdev temperature req
+ * @wmi_handle: wmi handle
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure.
+ */
+QDF_STATUS wmi_unified_get_temperature(wmi_unified_t wmi_handle);
-QDF_STATUS wmi_unified_set_smps_params(void *wmi_hdl, uint8_t vdev_id,
- int value);
+/**
+ * wmi_set_smps_params() - set smps params
+ * @wmi_handle: wmi handle
+ * @vdev_id: vdev id
+ * @value: value
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure.
+ */
+QDF_STATUS wmi_unified_set_smps_params(wmi_unified_t wmi_handle,
+ uint8_t vdev_id,
+ int value);
-QDF_STATUS wmi_unified_set_mimops(void *wmi_hdl, uint8_t vdev_id, int value);
+/**
+ * wmi_set_mimops() - set MIMO powersave
+ * @wmi_handle: wmi handle
+ * @vdev_id: vdev id
+ * @value: value
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure.
+ */
+QDF_STATUS wmi_unified_set_mimops(wmi_unified_t wmi_handle,
+ uint8_t vdev_id, int value);
-QDF_STATUS wmi_unified_lro_config_cmd(void *wmi_hdl,
- struct wmi_lro_config_cmd_t *wmi_lro_cmd);
+/**
+ * wmi_unified_lro_config_cmd() - process the LRO config command
+ * @wmi_handle: Pointer to wmi handle
+ * @wmi_lro_cmd: Pointer to LRO configuration parameters
+ *
+ * This function sends down the LRO configuration parameters to
+ * the firmware to enable LRO, sets the TCP flags and sets the
+ * seed values for the toeplitz hash generation
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS
+wmi_unified_lro_config_cmd(wmi_unified_t wmi_handle,
+ struct wmi_lro_config_cmd_t *wmi_lro_cmd);
-QDF_STATUS wmi_unified_set_thermal_mgmt_cmd(void *wmi_hdl,
- struct thermal_cmd_params *thermal_info);
+/**
+ * wmi_unified_set_thermal_mgmt_cmd() - set thermal mgmt command to fw
+ * @wmi_handle: Pointer to wmi handle
+ * @thermal_info: Thermal command information
+ *
+ * This function sends the thermal management command
+ * to the firmware
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS
+wmi_unified_set_thermal_mgmt_cmd(wmi_unified_t wmi_handle,
+ struct thermal_cmd_params *thermal_info);
-QDF_STATUS wmi_unified_peer_rate_report_cmd(void *wmi_hdl,
+/**
+ * wmi_unified_peer_rate_report_cmd() - process the peer rate report command
+ * @wmi_handle: Pointer to wmi handle
+ * @rate_report_params: Pointer to peer rate report parameters
+ *
+ *
+ * Return: QDF_STATUS_SUCCESS for success otherwise failure
+ */
+QDF_STATUS
+wmi_unified_peer_rate_report_cmd(
+ wmi_unified_t wmi_handle,
struct wmi_peer_rate_report_params *rate_report_params);
-QDF_STATUS wmi_unified_process_update_edca_param(void *wmi_hdl,
- uint8_t vdev_id, bool mu_edca_param,
- struct wmi_host_wme_vparams wmm_vparams[WMI_MAX_NUM_AC]);
+/**
+ * wmi_unified_process_update_edca_param() - update EDCA params
+ * @wmi_handle: wmi handle
+ * @vdev_id: vdev id.
+ * @mu_edca_param: mu_edca_param.
+ * @wmm_vparams: edca parameters
+ *
+ * This function updates EDCA parameters to the target
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS
+wmi_unified_process_update_edca_param(
+ wmi_unified_t wmi_handle,
+ uint8_t vdev_id,
+ bool mu_edca_param,
+ struct wmi_host_wme_vparams wmm_vparams[WMI_MAX_NUM_AC]);
-QDF_STATUS wmi_unified_probe_rsp_tmpl_send_cmd(void *wmi_hdl,
- uint8_t vdev_id,
- struct wmi_probe_resp_params *probe_rsp_info);
+/**
+ * wmi_unified_probe_rsp_tmpl_send_cmd() - send probe response template to fw
+ * @wmi_handle: wmi handle
+ * @vdev_id: vdev id
+ * @probe_rsp_info: probe response info
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS
+wmi_unified_probe_rsp_tmpl_send_cmd(
+ wmi_unified_t wmi_handle,
+ uint8_t vdev_id,
+ struct wmi_probe_resp_params *probe_rsp_info);
-QDF_STATUS wmi_unified_setup_install_key_cmd(void *wmi_hdl,
- struct set_key_params *key_params);
+/**
+ * wmi_unified_setup_install_key_cmd - send key to install to fw
+ * @wmi_handle: wmi handle
+ * @key_params: key parameters
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS
+wmi_unified_setup_install_key_cmd(wmi_unified_t wmi_handle,
+ struct set_key_params *key_params);
-QDF_STATUS wmi_unified_p2p_go_set_beacon_ie_cmd(void *wmi_hdl,
- uint32_t vdev_id, uint8_t *p2p_ie);
+/**
+ * wmi_unified_p2p_go_set_beacon_ie_cmd() - set beacon IE for p2p go
+ * @wmi_handle: wmi handle
+ * @vdev_id: vdev id
+ * @p2p_ie: p2p IE
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_unified_p2p_go_set_beacon_ie_cmd(wmi_unified_t wmi_hdl,
+ uint32_t vdev_id,
+ uint8_t *p2p_ie);
-QDF_STATUS wmi_unified_scan_probe_setoui_cmd(void *wmi_hdl,
- struct scan_mac_oui *psetoui);
+/**
+ * wmi_unified_scan_probe_setoui_cmd() - set scan probe OUI
+ * @wmi_handle: wmi handle
+ * @psetoui: OUI parameters
+ *
+ * set scan probe OUI parameters in firmware
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_unified_scan_probe_setoui_cmd(wmi_unified_t wmi_handle,
+ struct scan_mac_oui *psetoui);
#ifdef IPA_OFFLOAD
-QDF_STATUS wmi_unified_ipa_offload_control_cmd(void *wmi_hdl,
+/** wmi_unified_ipa_offload_control_cmd() - ipa offload control parameter
+ * @wmi_handle: wmi handle
+ * @ipa_offload: ipa offload control parameter
+ *
+ * Returns: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failures,
+ * error number otherwise
+ */
+QDF_STATUS
+wmi_unified_ipa_offload_control_cmd(
+ wmi_unified_t wmi_handle,
struct ipa_uc_offload_control_params *ipa_offload);
#endif
-QDF_STATUS wmi_unified_pno_stop_cmd(void *wmi_hdl, uint8_t vdev_id);
+/**
+ * wmi_unified_pno_stop_cmd() - PNO stop request
+ * @wmi_handle: wmi handle
+ * @vdev_id: vdev id
+ *
+ * This function request FW to stop ongoing PNO operation.
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_unified_pno_stop_cmd(wmi_unified_t wmi_handle, uint8_t vdev_id);
#ifdef FEATURE_WLAN_SCAN_PNO
-QDF_STATUS wmi_unified_pno_start_cmd(void *wmi_hdl,
- struct pno_scan_req_params *pno);
+/**
+ * wmi_unified_pno_start_cmd() - PNO start request
+ * @wmi_handle: wmi handle
+ * @pno: PNO request
+ *
+ * This function request FW to start PNO request.
+ * Request: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_unified_pno_start_cmd(wmi_unified_t wmi_handle,
+ struct pno_scan_req_params *pno);
#endif
-QDF_STATUS wmi_unified_nlo_mawc_cmd(void *wmi_hdl,
- struct nlo_mawc_params *params);
+/**
+ * wmi_unified_nlo_mawc_cmd() - NLO MAWC cmd configuration
+ * @wmi_handle: wmi handle
+ * @params: Configuration parameters
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_unified_nlo_mawc_cmd(wmi_unified_t wmi_handle,
+ struct nlo_mawc_params *params);
#ifdef WLAN_FEATURE_LINK_LAYER_STATS
/**
@@ -955,17 +1147,31 @@
/**
* wmi_unified_congestion_request_cmd() - send request to fw to get CCA
- * @wmi_hdl: wma handle
+ * @wmi_handle: wma handle
* @vdev_id: vdev id
*
* Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
*/
-QDF_STATUS wmi_unified_congestion_request_cmd(void *wmi_hdl,
- uint8_t vdev_id);
+QDF_STATUS wmi_unified_congestion_request_cmd(wmi_unified_t wmi_handle,
+ uint8_t vdev_id);
-QDF_STATUS wmi_unified_snr_request_cmd(void *wmi_hdl);
+/**
+ * wmi_unified_snr_request_cmd() - send request to fw to get RSSI stats
+ * @wmi_handle: wmi handle
+ * @rssi_req: get RSSI request
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_unified_snr_request_cmd(wmi_unified_t wmi_handle);
-QDF_STATUS wmi_unified_snr_cmd(void *wmi_hdl, uint8_t vdev_id);
+/**
+ * wmi_unified_snr_cmd() - get RSSI from fw
+ * @wmi_handle: wmi handle
+ * @vdev_id: vdev id
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_unified_snr_cmd(wmi_unified_t wmi_handle, uint8_t vdev_id);
/**
* wmi_unified_link_status_req_cmd() - process link status request from UMAC
@@ -978,11 +1184,28 @@
struct link_status_params *params);
#ifdef WLAN_SUPPORT_GREEN_AP
-QDF_STATUS wmi_unified_egap_conf_params_cmd(void *wmi_hdl,
+/**
+ * wmi_unified_egap_conf_params_cmd() - send wmi cmd of egap config params
+ * @wmi_handle: wmi handler
+ * @egap_params: pointer to egap_params
+ *
+ * Return: 0 for success, otherwise appropriate error code
+ */
+QDF_STATUS
+wmi_unified_egap_conf_params_cmd(
+ wmi_unified_t wmi_handle,
struct wlan_green_ap_egap_params *egap_params);
#endif
-QDF_STATUS wmi_unified_csa_offload_enable(void *wmi_hdl, uint8_t vdev_id);
+/**
+ * wmi_unified_csa_offload_enable() - send CSA offload enable command
+ * @wmi_handle: wmi handle
+ * @vdev_id: vdev id
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_unified_csa_offload_enable(wmi_unified_t wmi_handle,
+ uint8_t vdev_id);
#ifdef WLAN_FEATURE_CIF_CFR
/**
@@ -993,55 +1216,177 @@
*
* Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
*/
-QDF_STATUS wmi_unified_oem_dma_ring_cfg(void *wmi_hdl,
- wmi_oem_dma_ring_cfg_req_fixed_param *cfg);
+QDF_STATUS
+wmi_unified_oem_dma_ring_cfg(wmi_unified_t wmi_handle,
+ wmi_oem_dma_ring_cfg_req_fixed_param *cfg);
#endif
-QDF_STATUS wmi_unified_start_oem_data_cmd(void *wmi_hdl,
- uint32_t data_len,
- uint8_t *data);
+/**
+ * wmi_unified_start_oem_data_cmd() - start OEM data request to target
+ * @wmi_handle: wmi handle
+ * @data_len: length of OEM data
+ * @data: OEM data
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_unified_start_oem_data_cmd(wmi_unified_t wmi_handle,
+ uint32_t data_len,
+ uint8_t *data);
-QDF_STATUS wmi_unified_dfs_phyerr_filter_offload_en_cmd(void *wmi_hdl,
- bool dfs_phyerr_filter_offload);
+/**
+ * wmi_unified_dfs_phyerr_filter_offload_en_cmd() - enable dfs phyerr filter
+ * @wmi_handle: wmi handle
+ * @dfs_phyerr_filter_offload: is dfs phyerr filter offload
+ *
+ * Send WMI_DFS_PHYERR_FILTER_ENA_CMDID or
+ * WMI_DFS_PHYERR_FILTER_DIS_CMDID command
+ * to firmware based on phyerr filtering
+ * offload status.
+ *
+ * Return: 1 success, 0 failure
+ */
+QDF_STATUS
+wmi_unified_dfs_phyerr_filter_offload_en_cmd(wmi_unified_t wmi_handle,
+ bool dfs_phyerr_filter_offload);
#if !defined(REMOVE_PKT_LOG) && defined(FEATURE_PKTLOG)
-QDF_STATUS wmi_unified_pktlog_wmi_send_cmd(void *wmi_hdl,
- WMI_PKTLOG_EVENT pktlog_event,
- uint32_t cmd_id,
- uint8_t user_triggered);
+/**
+ * wmi_unified_pktlog_wmi_send_cmd() - send pktlog event command to target
+ * @wmi_handle: wmi handle
+ * @pktlog_event: pktlog event
+ * @cmd_id: pktlog cmd id
+ * @user_triggered: user triggered input for PKTLOG enable mode
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_unified_pktlog_wmi_send_cmd(wmi_unified_t wmi_handle,
+ WMI_PKTLOG_EVENT pktlog_event,
+ uint32_t cmd_id,
+ uint8_t user_triggered);
#endif
-QDF_STATUS wmi_unified_stats_ext_req_cmd(void *wmi_hdl,
- struct stats_ext_params *preq);
+/**
+ * wmi_unified_stats_ext_req_cmd() - request ext stats from fw
+ * @wmi_handle: wmi handle
+ * @preq: stats ext params
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_unified_stats_ext_req_cmd(wmi_unified_t wmi_handle,
+ struct stats_ext_params *preq);
-QDF_STATUS wmi_unified_process_dhcpserver_offload_cmd(void *wmi_hdl,
- struct dhcp_offload_info_params *params);
+/**
+ * wmi_unified_process_dhcpserver_offload_cmd() - enable DHCP server offload
+ * @wmi_handle: wmi handle
+ * @pDhcpSrvOffloadInfo: DHCP server offload info
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_unified_process_dhcpserver_offload_cmd(
+ wmi_unified_t wmi_handle,
+ struct dhcp_offload_info_params *params);
-QDF_STATUS wmi_unified_send_regdomain_info_to_fw_cmd(void *wmi_hdl,
- uint32_t reg_dmn, uint16_t regdmn2G,
- uint16_t regdmn5G, uint8_t ctl2G,
- uint8_t ctl5G);
+/**
+ * wmi_unified_send_regdomain_info_to_fw_cmd() - send regdomain info to fw
+ * @wmi_handle: wmi handle
+ * @reg_dmn: reg domain
+ * @regdmn2G: 2G reg domain
+ * @regdmn5G: 5G reg domain
+ * @ctl2G: 2G test limit
+ * @ctl5G: 5G test limit
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_unified_send_regdomain_info_to_fw_cmd(wmi_unified_t wmi_handle,
+ uint32_t reg_dmn,
+ uint16_t regdmn2G,
+ uint16_t regdmn5G,
+ uint8_t ctl2G,
+ uint8_t ctl5G);
-QDF_STATUS wmi_unified_process_fw_mem_dump_cmd(void *wmi_hdl,
- struct fw_dump_req_param *mem_dump_req);
+QDF_STATUS
+wmi_unified_process_fw_mem_dump_cmd(wmi_unified_t wmi_hdl,
+ struct fw_dump_req_param *mem_dump_req);
-QDF_STATUS wmi_unified_cfg_action_frm_tb_ppdu_cmd(void *wmi_hdl,
- struct cfg_action_frm_tb_ppdu_param *cfg_info);
+/**
+ * wmi_unified_cfg_action_frm_tb_ppdu_cmd()-send action frame TB PPDU cfg to FW
+ * @wmi_handle: Pointer to WMi handle
+ * @cfg_info: Pointer to cfg msg
+ *
+ * This function sends action frame TB PPDU cfg to firmware
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ *
+ */
+QDF_STATUS
+wmi_unified_cfg_action_frm_tb_ppdu_cmd(
+ wmi_unified_t wmi_handle,
+ struct cfg_action_frm_tb_ppdu_param *cfg_info);
-QDF_STATUS wmi_unified_save_fw_version_cmd(void *wmi_hdl,
- void *evt_buf);
+/**
+ * wmi_unified_save_fw_version_cmd() - save fw version
+ * @wmi_handle: pointer to wmi handle
+ * @evt_buf: Event buffer
+ *
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ *
+ */
+QDF_STATUS wmi_unified_save_fw_version_cmd(wmi_unified_t wmi_handle,
+ void *evt_buf);
-QDF_STATUS wmi_unified_log_supported_evt_cmd(void *wmi_hdl,
- uint8_t *event,
- uint32_t len);
+/**
+ * wmi_unified_log_supported_evt_cmd() - Enable/Disable FW diag/log events
+ * @wmi_handle: wmi handle
+ * @event: Event received from FW
+ * @len: Length of the event
+ *
+ * Enables the low frequency events and disables the high frequency
+ * events. Bit 17 indicates if the event if low/high frequency.
+ * 1 - high frequency, 0 - low frequency
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failures
+ */
+QDF_STATUS wmi_unified_log_supported_evt_cmd(wmi_unified_t wmi_handle,
+ uint8_t *event,
+ uint32_t len);
-QDF_STATUS wmi_unified_enable_specific_fw_logs_cmd(void *wmi_hdl,
- struct wmi_wifi_start_log *start_log);
+/**
+ * wmi_unified_enable_specific_fw_logs_cmd() - Start/Stop logging of diag log id
+ * @wmi_handle: wmi handle
+ * @start_log: Start logging related parameters
+ *
+ * Send the command to the FW based on which specific logging of diag
+ * event/log id can be started/stopped
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS
+wmi_unified_enable_specific_fw_logs_cmd(wmi_unified_t wmi_handle,
+ struct wmi_wifi_start_log *start_log);
-QDF_STATUS wmi_unified_flush_logs_to_fw_cmd(void *wmi_hdl);
+/**
+ * wmi_unified_flush_logs_to_fw_cmd() - Send log flush command to FW
+ * @wmi_handle: WMI handle
+ *
+ * This function is used to send the flush command to the FW,
+ * that will flush the fw logs that are residue in the FW
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_unified_flush_logs_to_fw_cmd(wmi_unified_t wmi_handle);
-QDF_STATUS wmi_unified_unit_test_cmd(void *wmi_hdl,
- struct wmi_unit_test_cmd *wmi_utest);
+/**
+ * wmi_unified_unit_test_cmd() - send unit test command to fw.
+ * @wmi_handle: wmi handle
+ * @wmi_utest: unit test command
+ *
+ * This function send unit test command to fw.
+ *
+ * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
+ */
+QDF_STATUS wmi_unified_unit_test_cmd(wmi_unified_t wmi_handle,
+ struct wmi_unit_test_cmd *wmi_utest);
#ifdef FEATURE_WLAN_APF
/**
diff --git a/wmi/src/wmi_unified_api.c b/wmi/src/wmi_unified_api.c
index c90d562..7b2b959 100644
--- a/wmi/src/wmi_unified_api.c
+++ b/wmi/src/wmi_unified_api.c
@@ -448,19 +448,10 @@
}
#ifdef FEATURE_FW_LOG_PARSING
-/**
- * wmi_unified_dbglog_cmd_send() - set debug log level
- * @param wmi_handle : handle to WMI.
- * @param param : pointer to hold dbglog level parameter
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
QDF_STATUS
-wmi_unified_dbglog_cmd_send(void *wmi_hdl,
- struct dbglog_params *dbglog_param)
+wmi_unified_dbglog_cmd_send(wmi_unified_t wmi_handle,
+ struct dbglog_params *dbglog_param)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_dbglog_cmd)
return wmi_handle->ops->send_dbglog_cmd(wmi_handle,
dbglog_param);
@@ -599,18 +590,9 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_mgmt_unified_cmd_send() - management cmd over wmi layer
- * @wmi_hdl : handle to WMI.
- * @param : pointer to hold mgmt cmd parameter
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_mgmt_unified_cmd_send(void *wmi_hdl,
- struct wmi_mgmt_params *param)
+QDF_STATUS wmi_mgmt_unified_cmd_send(wmi_unified_t wmi_handle,
+ struct wmi_mgmt_params *param)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_mgmt_cmd)
return wmi_handle->ops->send_mgmt_cmd(wmi_handle,
param);
@@ -618,18 +600,10 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_offchan_data_tx_cmd_send() - Send offchan data tx cmd over wmi layer
- * @wmi_hdl : handle to WMI.
- * @param : pointer to hold offchan data cmd parameter
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_offchan_data_tx_cmd_send(void *wmi_hdl,
- struct wmi_offchan_data_tx_params *param)
+QDF_STATUS
+wmi_offchan_data_tx_cmd_send(wmi_unified_t wmi_handle,
+ struct wmi_offchan_data_tx_params *param)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_offchan_data_tx_cmd)
return wmi_handle->ops->send_offchan_data_tx_cmd(wmi_handle,
param);
@@ -637,18 +611,9 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_modem_power_state() - set modem power state to fw
- * @wmi_hdl: wmi handle
- * @param_value: parameter value
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_modem_power_state(void *wmi_hdl,
- uint32_t param_value)
+QDF_STATUS wmi_unified_modem_power_state(wmi_unified_t wmi_handle,
+ uint32_t param_value)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_modem_power_state_cmd)
return wmi_handle->ops->send_modem_power_state_cmd(wmi_handle,
param_value);
@@ -656,19 +621,9 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_set_sta_ps_mode() - set sta powersave params in fw
- * @wmi_hdl: wmi handle
- * @vdev_id: vdev id
- * @val: value
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure.
- */
-QDF_STATUS wmi_unified_set_sta_ps_mode(void *wmi_hdl,
- uint32_t vdev_id, uint8_t val)
+QDF_STATUS wmi_unified_set_sta_ps_mode(wmi_unified_t wmi_handle,
+ uint32_t vdev_id, uint8_t val)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_set_sta_ps_mode_cmd)
return wmi_handle->ops->send_set_sta_ps_mode_cmd(wmi_handle,
vdev_id, val);
@@ -686,18 +641,9 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_set_mimops() - set MIMO powersave
- * @wmi_hdl: wmi handle
- * @vdev_id: vdev id
- * @value: value
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure.
- */
-QDF_STATUS wmi_unified_set_mimops(void *wmi_hdl, uint8_t vdev_id, int value)
+QDF_STATUS wmi_unified_set_mimops(wmi_unified_t wmi_handle, uint8_t vdev_id,
+ int value)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_set_mimops_cmd)
return wmi_handle->ops->send_set_mimops_cmd(wmi_handle,
vdev_id, value);
@@ -705,19 +651,10 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_set_smps_params() - set smps params
- * @wmi_hdl: wmi handle
- * @vdev_id: vdev id
- * @value: value
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure.
- */
-QDF_STATUS wmi_unified_set_smps_params(void *wmi_hdl, uint8_t vdev_id,
- int value)
+QDF_STATUS wmi_unified_set_smps_params(wmi_unified_t wmi_handle,
+ uint8_t vdev_id,
+ int value)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_set_smps_params_cmd)
return wmi_handle->ops->send_set_smps_params_cmd(wmi_handle,
vdev_id, value);
@@ -725,41 +662,18 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_get_temperature() - get pdev temperature req
- * @wmi_hdl: wmi handle
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure.
- */
-QDF_STATUS wmi_unified_get_temperature(void *wmi_hdl)
+QDF_STATUS wmi_unified_get_temperature(wmi_unified_t wmi_handle)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_get_temperature_cmd)
return wmi_handle->ops->send_get_temperature_cmd(wmi_handle);
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_set_sta_uapsd_auto_trig_cmd() - set uapsd auto trigger command
- * @wmi_hdl: wmi handle
- * @end_set_sta_ps_mode_cmd: cmd parameter strcture
- *
- * This function sets the trigger
- * uapsd params such as service interval, delay interval
- * and suspend interval which will be used by the firmware
- * to send trigger frames periodically when there is no
- * traffic on the transmit side.
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure.
- */
QDF_STATUS
-wmi_unified_set_sta_uapsd_auto_trig_cmd(void *wmi_hdl,
- struct sta_uapsd_trig_params *param)
+wmi_unified_set_sta_uapsd_auto_trig_cmd(wmi_unified_t wmi_handle,
+ struct sta_uapsd_trig_params *param)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_set_sta_uapsd_auto_trig_cmd)
return wmi_handle->ops->send_set_sta_uapsd_auto_trig_cmd(wmi_handle,
param);
@@ -767,22 +681,10 @@
return QDF_STATUS_E_FAILURE;
}
-
-/**
- * wmi_unified_set_thermal_mgmt_cmd() - set thermal mgmt command to fw
- * @wmi_handle: Pointer to wmi handle
- * @thermal_info: Thermal command information
- *
- * This function sends the thermal management command
- * to the firmware
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_set_thermal_mgmt_cmd(void *wmi_hdl,
- struct thermal_cmd_params *thermal_info)
+QDF_STATUS
+wmi_unified_set_thermal_mgmt_cmd(wmi_unified_t wmi_handle,
+ struct thermal_cmd_params *thermal_info)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_set_thermal_mgmt_cmd)
return wmi_handle->ops->send_set_thermal_mgmt_cmd(wmi_handle,
thermal_info);
@@ -790,23 +692,10 @@
return QDF_STATUS_E_FAILURE;
}
-
-/**
- * wmi_unified_lro_config_cmd() - process the LRO config command
- * @wmi: Pointer to wmi handle
- * @wmi_lro_cmd: Pointer to LRO configuration parameters
- *
- * This function sends down the LRO configuration parameters to
- * the firmware to enable LRO, sets the TCP flags and sets the
- * seed values for the toeplitz hash generation
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_lro_config_cmd(void *wmi_hdl,
- struct wmi_lro_config_cmd_t *wmi_lro_cmd)
+QDF_STATUS
+wmi_unified_lro_config_cmd(wmi_unified_t wmi_handle,
+ struct wmi_lro_config_cmd_t *wmi_lro_cmd)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_lro_config_cmd)
return wmi_handle->ops->send_lro_config_cmd(wmi_handle,
wmi_lro_cmd);
@@ -814,19 +703,11 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_peer_rate_report_cmd() - process the peer rate report command
- * @wmi_hdl: Pointer to wmi handle
- * @rate_report_params: Pointer to peer rate report parameters
- *
- *
- * Return: QDF_STATUS_SUCCESS for success otherwise failure
- */
-QDF_STATUS wmi_unified_peer_rate_report_cmd(void *wmi_hdl,
+QDF_STATUS
+wmi_unified_peer_rate_report_cmd(
+ wmi_unified_t wmi_handle,
struct wmi_peer_rate_report_params *rate_report_params)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_peer_rate_report_cmd)
return wmi_handle->ops->send_peer_rate_report_cmd(wmi_handle,
rate_report_params);
@@ -834,23 +715,13 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_process_update_edca_param() - update EDCA params
- * @wmi_hdl: wmi handle
- * @vdev_id: vdev id.
- * @mu_edca_param: mu_edca_param.
- * @wmm_vparams: edca parameters
- *
- * This function updates EDCA parameters to the target
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_process_update_edca_param(void *wmi_hdl,
- uint8_t vdev_id, bool mu_edca_param,
- struct wmi_host_wme_vparams wmm_vparams[WMI_MAX_NUM_AC])
+QDF_STATUS
+wmi_unified_process_update_edca_param(
+ wmi_unified_t wmi_handle,
+ uint8_t vdev_id,
+ bool mu_edca_param,
+ struct wmi_host_wme_vparams wmm_vparams[WMI_MAX_NUM_AC])
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_process_update_edca_param_cmd)
return wmi_handle->ops->send_process_update_edca_param_cmd(wmi_handle,
vdev_id, mu_edca_param, wmm_vparams);
@@ -858,20 +729,12 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_probe_rsp_tmpl_send_cmd() - send probe response template to fw
- * @wmi_hdl: wmi handle
- * @vdev_id: vdev id
- * @probe_rsp_info: probe response info
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_probe_rsp_tmpl_send_cmd(void *wmi_hdl,
- uint8_t vdev_id,
- struct wmi_probe_resp_params *probe_rsp_info)
+QDF_STATUS
+wmi_unified_probe_rsp_tmpl_send_cmd(
+ wmi_unified_t wmi_handle,
+ uint8_t vdev_id,
+ struct wmi_probe_resp_params *probe_rsp_info)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_probe_rsp_tmpl_send_cmd)
return wmi_handle->ops->send_probe_rsp_tmpl_send_cmd(wmi_handle,
vdev_id, probe_rsp_info);
@@ -879,18 +742,9 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_setup_install_key_cmd - send key to install to fw
- * @wmi_hdl: wmi handle
- * @key_params: key parameters
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_setup_install_key_cmd(void *wmi_hdl,
- struct set_key_params *key_params)
+QDF_STATUS wmi_unified_setup_install_key_cmd(wmi_unified_t wmi_handle,
+ struct set_key_params *key_params)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_setup_install_key_cmd)
return wmi_handle->ops->send_setup_install_key_cmd(wmi_handle,
key_params);
@@ -898,19 +752,10 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_p2p_go_set_beacon_ie_cmd() - set beacon IE for p2p go
- * @wma_handle: wma handle
- * @vdev_id: vdev id
- * @p2p_ie: p2p IE
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_p2p_go_set_beacon_ie_cmd(void *wmi_hdl,
- uint32_t vdev_id, uint8_t *p2p_ie)
+QDF_STATUS wmi_unified_p2p_go_set_beacon_ie_cmd(wmi_unified_t wmi_handle,
+ uint32_t vdev_id,
+ uint8_t *p2p_ie)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_p2p_go_set_beacon_ie_cmd)
return wmi_handle->ops->send_p2p_go_set_beacon_ie_cmd(wmi_handle,
vdev_id, p2p_ie);
@@ -918,20 +763,9 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_scan_probe_setoui_cmd() - set scan probe OUI
- * @wmi_hdl: wmi handle
- * @psetoui: OUI parameters
- *
- * set scan probe OUI parameters in firmware
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_scan_probe_setoui_cmd(void *wmi_hdl,
- struct scan_mac_oui *psetoui)
+QDF_STATUS wmi_unified_scan_probe_setoui_cmd(wmi_unified_t wmi_handle,
+ struct scan_mac_oui *psetoui)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_scan_probe_setoui_cmd)
return wmi_handle->ops->send_scan_probe_setoui_cmd(wmi_handle,
psetoui);
@@ -940,18 +774,11 @@
}
#ifdef IPA_OFFLOAD
-/** wmi_unified_ipa_offload_control_cmd() - ipa offload control parameter
- * @wmi_hdl: wmi handle
- * @ipa_offload: ipa offload control parameter
- *
- * Returns: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failures,
- * error number otherwise
- */
-QDF_STATUS wmi_unified_ipa_offload_control_cmd(void *wmi_hdl,
+QDF_STATUS
+wmi_unified_ipa_offload_control_cmd(
+ wmi_unified_t wmi_handle,
struct ipa_uc_offload_control_params *ipa_offload)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (!wmi_handle)
return QDF_STATUS_E_FAILURE;
@@ -963,19 +790,8 @@
}
#endif
-/**
- * send_pno_stop_cmd() - PNO stop request
- * @wmi_hdl: wmi handle
- * @vdev_id: vdev id
- *
- * This function request FW to stop ongoing PNO operation.
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_pno_stop_cmd(void *wmi_hdl, uint8_t vdev_id)
+QDF_STATUS wmi_unified_pno_stop_cmd(wmi_unified_t wmi_handle, uint8_t vdev_id)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_pno_stop_cmd)
return wmi_handle->ops->send_pno_stop_cmd(wmi_handle,
vdev_id);
@@ -983,20 +799,10 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_pno_start_cmd() - PNO start request
- * @wmi_hdl: wmi handle
- * @pno: PNO request
- *
- * This function request FW to start PNO request.
- * Request: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
#ifdef FEATURE_WLAN_SCAN_PNO
-QDF_STATUS wmi_unified_pno_start_cmd(void *wmi_hdl,
- struct pno_scan_req_params *pno)
+QDF_STATUS wmi_unified_pno_start_cmd(wmi_unified_t wmi_handle,
+ struct pno_scan_req_params *pno)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_pno_start_cmd)
return wmi_handle->ops->send_pno_start_cmd(wmi_handle,
pno);
@@ -1005,18 +811,9 @@
}
#endif
-/**
- * wmi_unified_nlo_mawc_cmd() - NLO MAWC cmd configuration
- * @wmi_hdl: wmi handle
- * @params: Configuration parameters
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_nlo_mawc_cmd(void *wmi_hdl,
- struct nlo_mawc_params *params)
+QDF_STATUS wmi_unified_nlo_mawc_cmd(wmi_unified_t wmi_handle,
+ struct nlo_mawc_params *params)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_nlo_mawc_cmd)
return wmi_handle->ops->send_nlo_mawc_cmd(wmi_handle, params);
@@ -1055,18 +852,9 @@
}
#endif /* WLAN_FEATURE_LINK_LAYER_STATS */
-/**
- * wmi_unified_congestion_request_cmd() - send request to fw to get CCA
- * @wmi_hdl: wma handle
- * @vdev_id: vdev id
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_congestion_request_cmd(void *wmi_hdl,
- uint8_t vdev_id)
+QDF_STATUS wmi_unified_congestion_request_cmd(wmi_unified_t wmi_handle,
+ uint8_t vdev_id)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_congestion_cmd)
return wmi_handle->ops->send_congestion_cmd(wmi_handle,
vdev_id);
@@ -1074,34 +862,16 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_snr_request_cmd() - send request to fw to get RSSI stats
- * @wmi_handle: wmi handle
- * @rssi_req: get RSSI request
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_snr_request_cmd(void *wmi_hdl)
+QDF_STATUS wmi_unified_snr_request_cmd(wmi_unified_t wmi_handle)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_snr_request_cmd)
return wmi_handle->ops->send_snr_request_cmd(wmi_handle);
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_snr_cmd() - get RSSI from fw
- * @wmi_handle: wmi handle
- * @vdev_id: vdev id
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_snr_cmd(void *wmi_hdl, uint8_t vdev_id)
+QDF_STATUS wmi_unified_snr_cmd(wmi_unified_t wmi_handle, uint8_t vdev_id)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_snr_cmd)
return wmi_handle->ops->send_snr_cmd(wmi_handle,
vdev_id);
@@ -1127,18 +897,10 @@
}
#ifdef WLAN_SUPPORT_GREEN_AP
-/**
- * wmi_unified_egap_conf_params_cmd() - send wmi cmd of egap configuration params
- * @wmi_handle: wmi handler
- * @egap_params: pointer to egap_params
- *
- * Return: 0 for success, otherwise appropriate error code
- */
-QDF_STATUS wmi_unified_egap_conf_params_cmd(void *wmi_hdl,
- struct wlan_green_ap_egap_params *egap_params)
+QDF_STATUS
+wmi_unified_egap_conf_params_cmd(wmi_unified_t wmi_handle,
+ struct wlan_green_ap_egap_params *egap_params)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_egap_conf_params_cmd)
return wmi_handle->ops->send_egap_conf_params_cmd(wmi_handle,
egap_params);
@@ -1147,17 +909,9 @@
}
#endif
-/**
- * wmi_unified_csa_offload_enable() - send CSA offload enable command
- * @wmi_hdl: wmi handle
- * @vdev_id: vdev id
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_csa_offload_enable(void *wmi_hdl, uint8_t vdev_id)
+QDF_STATUS wmi_unified_csa_offload_enable(wmi_unified_t wmi_handle,
+ uint8_t vdev_id)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_csa_offload_enable_cmd)
return wmi_handle->ops->send_csa_offload_enable_cmd(wmi_handle,
vdev_id);
@@ -1166,11 +920,10 @@
}
#ifdef WLAN_FEATURE_CIF_CFR
-QDF_STATUS wmi_unified_oem_dma_ring_cfg(void *wmi_hdl,
- wmi_oem_dma_ring_cfg_req_fixed_param *cfg)
+QDF_STATUS
+wmi_unified_oem_dma_ring_cfg(wmi_unified_t wmi_handle,
+ wmi_oem_dma_ring_cfg_req_fixed_param *cfg)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_start_oem_data_cmd)
return wmi_handle->ops->send_oem_dma_cfg_cmd(wmi_handle, cfg);
@@ -1178,19 +931,10 @@
}
#endif
-/**
- * wmi_unified_start_oem_data_cmd() - start OEM data request to target
- * @wmi_handle: wmi handle
- * @startOemDataReq: start request params
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_start_oem_data_cmd(void *wmi_hdl,
- uint32_t data_len,
- uint8_t *data)
+QDF_STATUS wmi_unified_start_oem_data_cmd(wmi_unified_t wmi_handle,
+ uint32_t data_len,
+ uint8_t *data)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_start_oem_data_cmd)
return wmi_handle->ops->send_start_oem_data_cmd(wmi_handle,
data_len, data);
@@ -1198,24 +942,10 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_dfs_phyerr_filter_offload_en_cmd() - enable dfs phyerr filter
- * @wmi_handle: wmi handle
- * @dfs_phyerr_filter_offload: is dfs phyerr filter offload
- *
- * Send WMI_DFS_PHYERR_FILTER_ENA_CMDID or
- * WMI_DFS_PHYERR_FILTER_DIS_CMDID command
- * to firmware based on phyerr filtering
- * offload status.
- *
- * Return: 1 success, 0 failure
- */
QDF_STATUS
-wmi_unified_dfs_phyerr_filter_offload_en_cmd(void *wmi_hdl,
- bool dfs_phyerr_filter_offload)
+wmi_unified_dfs_phyerr_filter_offload_en_cmd(wmi_unified_t wmi_handle,
+ bool dfs_phyerr_filter_offload)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_dfs_phyerr_filter_offload_en_cmd)
return wmi_handle->ops->send_dfs_phyerr_filter_offload_en_cmd(wmi_handle,
dfs_phyerr_filter_offload);
@@ -1224,22 +954,11 @@
}
#if !defined(REMOVE_PKT_LOG) && defined(FEATURE_PKTLOG)
-/**
- * wmi_unified_pktlog_wmi_send_cmd() - send pktlog enable/disable command to target
- * @wmi_handle: wmi handle
- * @pktlog_event: pktlog event
- * @cmd_id: pktlog cmd id
- * @user_triggered: user triggered input for PKTLOG enable mode
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_pktlog_wmi_send_cmd(void *wmi_hdl,
- WMI_PKTLOG_EVENT pktlog_event,
- uint32_t cmd_id,
- uint8_t user_triggered)
+QDF_STATUS wmi_unified_pktlog_wmi_send_cmd(wmi_unified_t wmi_handle,
+ WMI_PKTLOG_EVENT pktlog_event,
+ uint32_t cmd_id,
+ uint8_t user_triggered)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_pktlog_wmi_send_cmd)
return wmi_handle->ops->send_pktlog_wmi_send_cmd(wmi_handle,
pktlog_event, cmd_id, user_triggered);
@@ -1248,18 +967,9 @@
}
#endif /* !REMOVE_PKT_LOG && FEATURE_PKTLOG */
-/**
- * wmi_unified_stats_ext_req_cmd() - request ext stats from fw
- * @wmi_handle: wmi handle
- * @preq: stats ext params
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_stats_ext_req_cmd(void *wmi_hdl,
- struct stats_ext_params *preq)
+QDF_STATUS wmi_unified_stats_ext_req_cmd(wmi_unified_t wmi_handle,
+ struct stats_ext_params *preq)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_stats_ext_req_cmd)
return wmi_handle->ops->send_stats_ext_req_cmd(wmi_handle,
preq);
@@ -1267,18 +977,10 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_process_dhcpserver_offload_cmd() - enable DHCP server offload
- * @wmi_handle: wmi handle
- * @pDhcpSrvOffloadInfo: DHCP server offload info
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_process_dhcpserver_offload_cmd(void *wmi_hdl,
- struct dhcp_offload_info_params *params)
+QDF_STATUS wmi_unified_process_dhcpserver_offload_cmd(
+ wmi_unified_t wmi_handle,
+ struct dhcp_offload_info_params *params)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_process_dhcpserver_offload_cmd)
return wmi_handle->ops->send_process_dhcpserver_offload_cmd(wmi_handle,
params);
@@ -1286,24 +988,13 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_send_regdomain_info_to_fw_cmd() - send regdomain info to fw
- * @wmi_handle: wmi handle
- * @reg_dmn: reg domain
- * @regdmn2G: 2G reg domain
- * @regdmn5G: 5G reg domain
- * @ctl2G: 2G test limit
- * @ctl5G: 5G test limit
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_send_regdomain_info_to_fw_cmd(void *wmi_hdl,
- uint32_t reg_dmn, uint16_t regdmn2G,
- uint16_t regdmn5G, uint8_t ctl2G,
- uint8_t ctl5G)
+QDF_STATUS wmi_unified_send_regdomain_info_to_fw_cmd(wmi_unified_t wmi_handle,
+ uint32_t reg_dmn,
+ uint16_t regdmn2G,
+ uint16_t regdmn5G,
+ uint8_t ctl2G,
+ uint8_t ctl5G)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_regdomain_info_to_fw_cmd)
return wmi_handle->ops->send_regdomain_info_to_fw_cmd(wmi_handle,
reg_dmn, regdmn2G,
@@ -1313,23 +1004,11 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_cfg_action_frm_tb_ppdu_cmd()-send action frame TB PPDU cfg to FW
- * @wmi_handle: Pointer to WMi handle
- * @cfg_info: Pointer to cfg msg
- *
- * This function sends action frame TB PPDU cfg to firmware
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- *
- */
QDF_STATUS
-wmi_unified_cfg_action_frm_tb_ppdu_cmd(void *wmi_hdl,
- struct cfg_action_frm_tb_ppdu_param
- *cfg_info)
+wmi_unified_cfg_action_frm_tb_ppdu_cmd(
+ wmi_unified_t wmi_handle,
+ struct cfg_action_frm_tb_ppdu_param *cfg_info)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_cfg_action_frm_tb_ppdu_cmd)
return wmi_handle->ops->send_cfg_action_frm_tb_ppdu_cmd(
wmi_handle, cfg_info);
@@ -1337,23 +1016,9 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_save_fw_version_cmd() - save fw version
- * @wmi_handle: pointer to wmi handle
- * @res_cfg: resource config
- * @num_mem_chunks: no of mem chunck
- * @mem_chunk: pointer to mem chunck structure
- *
- * This function sends IE information to firmware
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- *
- */
-QDF_STATUS wmi_unified_save_fw_version_cmd(void *wmi_hdl,
- void *evt_buf)
+QDF_STATUS wmi_unified_save_fw_version_cmd(wmi_unified_t wmi_handle,
+ void *evt_buf)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->save_fw_version_cmd)
return wmi_handle->ops->save_fw_version_cmd(wmi_handle,
evt_buf);
@@ -1361,24 +1026,10 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_log_supported_evt_cmd() - Enable/Disable FW diag/log events
- * @wmi_hdl: wmi handle
- * @event: Event received from FW
- * @len: Length of the event
- *
- * Enables the low frequency events and disables the high frequency
- * events. Bit 17 indicates if the event if low/high frequency.
- * 1 - high frequency, 0 - low frequency
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failures
- */
-QDF_STATUS wmi_unified_log_supported_evt_cmd(void *wmi_hdl,
- uint8_t *event,
- uint32_t len)
+QDF_STATUS wmi_unified_log_supported_evt_cmd(wmi_unified_t wmi_handle,
+ uint8_t *event,
+ uint32_t len)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_log_supported_evt_cmd)
return wmi_handle->ops->send_log_supported_evt_cmd(wmi_handle,
event, len);
@@ -1393,21 +1044,11 @@
wmi_handle->ops->send_time_stamp_sync_cmd(wmi_handle);
}
-/**
- * wmi_unified_enable_specific_fw_logs_cmd() - Start/Stop logging of diag log id
- * @wmi_hdl: wmi handle
- * @start_log: Start logging related parameters
- *
- * Send the command to the FW based on which specific logging of diag
- * event/log id can be started/stopped
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_enable_specific_fw_logs_cmd(void *wmi_hdl,
- struct wmi_wifi_start_log *start_log)
-{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
+QDF_STATUS
+wmi_unified_enable_specific_fw_logs_cmd(wmi_unified_t wmi_handle,
+ struct wmi_wifi_start_log *start_log)
+{
if (wmi_handle->ops->send_enable_specific_fw_logs_cmd)
return wmi_handle->ops->send_enable_specific_fw_logs_cmd(wmi_handle,
start_log);
@@ -1415,19 +1056,8 @@
return QDF_STATUS_E_FAILURE;
}
-/**
- * wmi_unified_flush_logs_to_fw_cmd() - Send log flush command to FW
- * @wmi_hdl: WMI handle
- *
- * This function is used to send the flush command to the FW,
- * that will flush the fw logs that are residue in the FW
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_flush_logs_to_fw_cmd(void *wmi_hdl)
+QDF_STATUS wmi_unified_flush_logs_to_fw_cmd(wmi_unified_t wmi_handle)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_flush_logs_to_fw_cmd)
return wmi_handle->ops->send_flush_logs_to_fw_cmd(wmi_handle);
@@ -1456,20 +1086,9 @@
}
-/**
- * wmi_unified_unit_test_cmd() - send unit test command to fw.
- * @wmi_hdl: wmi handle
- * @wmi_utest: unit test command
- *
- * This function send unit test command to fw.
- *
- * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
- */
-QDF_STATUS wmi_unified_unit_test_cmd(void *wmi_hdl,
- struct wmi_unit_test_cmd *wmi_utest)
+QDF_STATUS wmi_unified_unit_test_cmd(wmi_unified_t wmi_handle,
+ struct wmi_unit_test_cmd *wmi_utest)
{
- wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
if (wmi_handle->ops->send_unit_test_cmd)
return wmi_handle->ops->send_unit_test_cmd(wmi_handle,
wmi_utest);