qcacmn: Add new vendor sub command for wifi test configuration
Define new vendor sub command for configuring the device with
wifi test configuration. Add new test config attributes for this
sub command that are used to configure the device for testbed
configuration.
Change-Id: Ic866d54ba528525c94bcc7b4a5a8cf9c5c1408d0
CRs-Fixed: 2186214
diff --git a/os_if/linux/qca_vendor.h b/os_if/linux/qca_vendor.h
index aae6933..75fcbca 100644
--- a/os_if/linux/qca_vendor.h
+++ b/os_if/linux/qca_vendor.h
@@ -257,7 +257,9 @@
* @QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS and is used to retrieve the
* settings currently in use. The attributes returned by this command are
* defined by enum qca_vendor_attr_sar_limits.
- *
+ * @QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION: Sub command to set WiFi
+ * test configuration. Attributes for this command are defined in
+ * enum qca_wlan_vendor_attr_wifi_test_config.
*/
enum qca_nl80211_vendor_subcmds {
@@ -460,6 +462,8 @@
QCA_NL80211_VENDOR_SUBCMD_HTT_STATS = 162,
QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO = 163,
QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS = 164,
+ /* Wi-Fi test configuration subcommand */
+ QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION = 169,
};
enum qca_wlan_vendor_tos {
@@ -5419,4 +5423,113 @@
#define cfg80211_vendor_event_alloc backported_cfg80211_vendor_event_alloc
#endif
+/**
+ * enum he_fragmentation_val - HE fragmentation support values
+ * Indicates level of dynamic fragmentation that is supported by
+ * a STA as a recipient.
+ * HE fragmentation values are defined as per 11ax spec and are used in
+ * HE capability IE to advertise the support. These values are validated
+ * in the driver to check the device capability and advertised in the HE
+ * capability element.
+ *
+ * @HE_FRAG_DISABLE: no support for dynamic fragmentation
+ * @HE_FRAG_LEVEL1: support for dynamic fragments that are
+ * contained within an MPDU or S-MPDU, no support for dynamic fragments
+ * within an A-MPDU that is not an S-MPDU.
+ * @HE_FRAG_LEVEL2: support for dynamic fragments that are
+ * contained within an MPDU or S-MPDU and support for up to one dynamic
+ * fragment for each MSDU, each A-MSDU if supported by the recipient, and
+ * each MMPDU within an A-MPDU or multi-TID A-MPDU that is not an
+ * MPDU or S-MPDU.
+ * @HE_FRAG_LEVEL3: support for dynamic fragments that are
+ * contained within an MPDU or S-MPDU and support for multiple dynamic
+ * fragments for each MSDU and for each A-MSDU if supported by the
+ * recipient within an A-MPDU or multi-TID AMPDU and up to one dynamic
+ * fragment for each MMPDU in a multi-TID A-MPDU that is not an S-MPDU.
+ */
+enum he_fragmentation_val {
+ HE_FRAG_DISABLE,
+ HE_FRAG_LEVEL1,
+ HE_FRAG_LEVEL2,
+ HE_FRAG_LEVEL3,
+};
+
+/**
+ * enum he_mcs_config - HE MCS support configuration
+ *
+ * Configures the HE Tx/Rx MCS map in HE capability IE for given bandwidth.
+ * These values are used in driver to configure the HE MCS map to advertise
+ * Tx/Rx MCS map in HE capability and these values are applied for all the
+ * streams supported by the device. To configure MCS for different bandwidths,
+ * vendor command needs to be sent using this attribute with appropriate value.
+ * For example, to configure HE_80_MCS_0_7, send vendor command using HE MCS
+ * attribute with QCA_WLAN_VENDOR_ATTR_HE_80_MCS0_7. And to configure HE MCS
+ * for HE_160_MCS0_11 send this command using HE MCS config attribute with
+ * value QCA_WLAN_VENDOR_ATTR_HE_160_MCS0_11;
+ *
+ * @HE_80_MCS0_7: support for HE 80/40/20MHz MCS 0 to 7
+ * @HE_80_MCS0_9: support for HE 80/40/20MHz MCS 0 to 9
+ * @HE_80_MCS0_11: support for HE 80/40/20MHz MCS 0 to 11
+ * @HE_160_MCS0_7: support for HE 160MHz MCS 0 to 7
+ * @HE_160_MCS0_9: support for HE 160MHz MCS 0 to 9
+ * @HE_160_MCS0_11: support for HE 160MHz MCS 0 to 11
+ * @HE_80p80_MCS0_7: support for HE 80p80MHz MCS 0 to 7
+ * @HE_80p80_MCS0_9: support for HE 80p80MHz MCS 0 to 9
+ * @HE_80p80_MCS0_11: support for HE 80p80MHz MCS 0 to 11
+ */
+enum he_mcs_config {
+ HE_80_MCS0_7 = 0,
+ HE_80_MCS0_9 = 1,
+ HE_80_MCS0_11 = 2,
+ HE_160_MCS0_7 = 4,
+ HE_160_MCS0_9 = 5,
+ HE_160_MCS0_11 = 6,
+ HE_80p80_MCS0_7 = 8,
+ HE_80p80_MCS0_9 = 9,
+ HE_80p80_MCS0_11 = 10,
+};
+
+/* Attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION
+ */
+enum qca_wlan_vendor_attr_wifi_test_config {
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_INVALID = 0,
+ /* 8-bit unsigned value to configure the driver to enable/disable
+ * WMM feature. This attribute is used to configure testbed device.
+ * 1-enable, 0-disable
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_WMM_ENABLE = 1,
+
+ /* 8-bit unsigned value to configure the driver to accept/reject
+ * the addba request from peer. This attribute is used to configure
+ * the testbed device.
+ * 1-accept addba, 0-reject addba
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ACCEPT_ADDBA_REQ = 2,
+
+ /* 8-bit unsigned value to configure the driver to send or not to
+ * send the addba request to peer.
+ * This attribute is used to configure the testbed device.
+ * 1-send addba, 0-do not send addba
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_SEND_ADDBA_REQ = 3,
+
+ /* 8-bit unsigned value to indicate the HE fragmentation support.
+ * Uses enum he_fragmentation_val values
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_FRAGMENTATION = 4,
+
+ /* 8-bit unsigned value to indicate the HE MCS support.
+ * Uses he_mcs_config enum values
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MCS = 5,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX =
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST - 1,
+};
+
#endif