| /* |
| * Copyright (c) 2017-2019 The Linux Foundation. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /* |
| * DOC: contains scan init/deinit public api |
| */ |
| |
| #ifndef _WLAN_SCAN_MAIN_API_H_ |
| #define _WLAN_SCAN_MAIN_API_H_ |
| |
| #include <qdf_atomic.h> |
| #include <wlan_objmgr_psoc_obj.h> |
| #include <wlan_objmgr_pdev_obj.h> |
| #include <wlan_objmgr_vdev_obj.h> |
| #include <wlan_scan_public_structs.h> |
| #include "wlan_scan_cache_db.h" |
| #include "wlan_scan_11d.h" |
| #include "wlan_scan_cfg.h" |
| |
| #define scm_alert(params...) \ |
| QDF_TRACE_FATAL(QDF_MODULE_ID_SCAN, params) |
| #define scm_err(params...) \ |
| QDF_TRACE_ERROR(QDF_MODULE_ID_SCAN, params) |
| #define scm_warn(params...) \ |
| QDF_TRACE_WARN(QDF_MODULE_ID_SCAN, params) |
| #define scm_notice(params...) \ |
| QDF_TRACE_INFO(QDF_MODULE_ID_SCAN, params) |
| #define scm_info(params...) \ |
| QDF_TRACE_INFO(QDF_MODULE_ID_SCAN, params) |
| #define scm_debug(params...) \ |
| QDF_TRACE_DEBUG(QDF_MODULE_ID_SCAN, params) |
| |
| /* Rate Limited Logs */ |
| #define scm_alert_rl(params...) \ |
| QDF_TRACE_FATAL_RL(QDF_MODULE_ID_SCAN, params) |
| #define scm_err_rl(params...) \ |
| QDF_TRACE_ERROR_RL(QDF_MODULE_ID_SCAN, params) |
| #define scm_warn_rl(params...) \ |
| QDF_TRACE_WARN_RL(QDF_MODULE_ID_SCAN, params) |
| #define scm_info_rl(params...) \ |
| QDF_TRACE_INFO_RL(QDF_MODULE_ID_SCAN, params) |
| #define scm_debug_rl(params...) \ |
| QDF_TRACE_DEBUG_RL(QDF_MODULE_ID_SCAN, params) |
| |
| #define scm_nofl_alert(params...) \ |
| QDF_TRACE_FATAL_NO_FL(QDF_MODULE_ID_SCAN, params) |
| #define scm_nofl_err(params...) \ |
| QDF_TRACE_ERROR_NO_FL(QDF_MODULE_ID_SCAN, params) |
| #define scm_nofl_warn(params...) \ |
| QDF_TRACE_WARN_NO_FL(QDF_MODULE_ID_SCAN, params) |
| #define scm_nofl_info(params...) \ |
| QDF_TRACE_INFO_NO_FL(QDF_MODULE_ID_SCAN, params) |
| #define scm_nofl_debug(params...) \ |
| QDF_TRACE_DEBUG_NO_FL(QDF_MODULE_ID_SCAN, params) |
| |
| #define scm_hex_dump(level, data, buf_len) \ |
| qdf_trace_hex_dump(QDF_MODULE_ID_SCAN, level, data, buf_len) |
| |
| #define MAX_SCAN_EVENT_HANDLERS_PER_PDEV 100 |
| #define WLAN_MAX_MODULE_NAME 40 |
| #define WLAN_MAX_REQUESTORS 200 |
| #define WLAN_SCAN_ID_MASK 0x00000FFF |
| #define WLAN_HOST_SCAN_REQ_ID_PREFIX 0x0000A000 |
| #define SCAN_NPROBES_DEFAULT 2 |
| #define WLAN_P2P_SOCIAL_CHANNELS 3 |
| |
| #define SCAN_BURST_SCAN_MAX_NUM_OFFCHANNELS (3) |
| #define SCAN_SCAN_IDLE_TIME_DEFAULT (25) |
| #define SCAN_3PORT_CONC_SCAN_MAX_BURST_DURATION (25) |
| #define SCAN_CTS_DURATION_MS_MAX (32) |
| #define SCAN_ROAM_SCAN_CHANNEL_SWITCH_TIME (4) |
| #define SCAN_DWELL_TIME_PROBE_TIME_MAP_SIZE (11) |
| #define SCAN_GO_MIN_ACTIVE_SCAN_BURST_DURATION (40) |
| #define SCAN_GO_MAX_ACTIVE_SCAN_BURST_DURATION (240) |
| #define SCAN_P2P_SCAN_MAX_BURST_DURATION (240) |
| #define SCAN_GO_BURST_SCAN_MAX_NUM_OFFCHANNELS (6) |
| |
| /** |
| * struct probe_time_dwell_time - probe time, dwell time map |
| * @dwell_time: dwell time |
| * @probe_time: repeat probe time |
| */ |
| struct probe_time_dwell_time { |
| uint8_t dwell_time; |
| uint8_t probe_time; |
| }; |
| |
| /* |
| * For the requestor id: |
| * bit 0~12 is used for real requestor id. |
| * bit 13~15 is used for requestor prefix. |
| * bit 16~19 is used by specific user to aware it is issued by himself. |
| * bit 20~31 is reserved. |
| */ |
| #define WLAN_SCAN_REQUESTER_ID_PREFIX 0x0000A000 |
| #define WLAN_SCAN_REQUESTER_ID_MASK 0x00001FFF |
| |
| #define SCM_NUM_RSSI_CAT 15 |
| #define SCAN_STA_MIRACAST_MCC_REST_TIME 400 |
| |
| #define SCAN_TIMEOUT_GRACE_PERIOD 10 |
| #define SCAN_MAX_BSS_PDEV 100 |
| #define SCAN_PRIORITY SCAN_PRIORITY_LOW |
| |
| /* DBS Scan policy selection ext flags */ |
| #define SCAN_FLAG_EXT_DBS_SCAN_POLICY_MASK 0x00000003 |
| #define SCAN_FLAG_EXT_DBS_SCAN_POLICY_BIT 0 |
| #define SCAN_DBS_POLICY_DEFAULT 0x0 |
| #define SCAN_DBS_POLICY_FORCE_NONDBS 0x1 |
| #define SCAN_DBS_POLICY_IGNORE_DUTY 0x2 |
| #define SCAN_DBS_POLICY_MAX 0x3 |
| /* Minimum number of channels for enabling DBS Scan */ |
| #define SCAN_MIN_CHAN_DBS_SCAN_THRESHOLD 8 |
| /* |
| * Enable Reception of Public Action frame with this flag |
| */ |
| #define SCAN_FLAG_EXT_FILTER_PUBLIC_ACTION_FRAME 0x4 |
| |
| /* Indicate to scan all PSC channel */ |
| #define SCAN_FLAG_EXT_6GHZ_SCAN_ALL_PSC_CH 0x8 |
| |
| /* Indicate to scan all NON-PSC channel */ |
| #define SCAN_FLAG_EXT_6GHZ_SCAN_ALL_NON_PSC_CH 0x10 |
| |
| /* Indicate to save scan result matching hint from scan client */ |
| #define SCAN_FLAG_EXT_6GHZ_MATCH_HINT 0x20 |
| |
| /* Skip any channel on which RNR information is not received */ |
| #define SCAN_FLAG_EXT_6GHZ_SKIP_NON_RNR_CH 0x40 |
| |
| /* Indicate client hint req is high priority than FW rnr or FILS discovery */ |
| #define SCAN_FLAG_EXT_6GHZ_CLIENT_HIGH_PRIORITY 0x80 |
| |
| /* Passive dwell time if bt_a2dp is enabled. Time in msecs*/ |
| #define PASSIVE_DWELL_TIME_BT_A2DP_ENABLED 28 |
| |
| /** |
| * struct cb_handler - defines scan event handler |
| * call back function and arguments |
| * @func: handler function pointer |
| * @arg: argument to handler function |
| */ |
| struct cb_handler { |
| scan_event_handler func; |
| void *arg; |
| }; |
| |
| /** |
| * struct pdev_scan_ev_handler - pdev scan event handlers |
| * @cb_handler: array of registered scan handlers |
| */ |
| struct pdev_scan_ev_handler { |
| uint32_t handler_cnt; |
| struct cb_handler cb_handlers[MAX_SCAN_EVENT_HANDLERS_PER_PDEV]; |
| }; |
| |
| /** |
| * struct global_scan_ev_handlers - per pdev registered scan event handlers |
| * @pdev_scan_ev_handler: per pdev registered scan event handlers |
| */ |
| struct global_scan_ev_handlers { |
| struct pdev_scan_ev_handler pdev_ev_handlers[WLAN_UMAC_MAX_PDEVS]; |
| }; |
| |
| /** |
| * struct scan_requester_info - defines scan requester id |
| * and event handler mapping |
| * @requester: requester ID allocated |
| * @module: module name of requester |
| * @ev_handler: event handlerto be invoked |
| */ |
| struct scan_requester_info { |
| wlan_scan_requester requester; |
| uint8_t module[WLAN_MAX_MODULE_NAME]; |
| struct cb_handler ev_handler; |
| }; |
| |
| /** |
| * struct pdev_scan_info - defines per pdev scan info |
| * @wide_band_scan: wide band scan capability |
| * @last_scan_time: time of last scan start on this pdev |
| * @custom_chan_list: scan only these channels |
| * @conf_bssid: configured bssid of the hidden AP |
| * @conf_ssid: configured desired ssid |
| */ |
| struct pdev_scan_info { |
| bool wide_band_scan; |
| qdf_time_t last_scan_time; |
| struct chan_list custom_chan_list; |
| uint8_t conf_bssid[QDF_MAC_ADDR_SIZE]; |
| struct wlan_ssid conf_ssid; |
| }; |
| |
| /** |
| * struct scan_vdev_obj - scan vdev obj |
| * @pno_match_evt_received: pno match received |
| * @pno_in_progress: pno in progress |
| * @scan_disabled: if scan is disabled for this vdev |
| * @first_scan_done: Whether its the first scan or not for this particular vdev. |
| */ |
| struct scan_vdev_obj { |
| bool pno_match_evt_received; |
| bool pno_in_progress; |
| uint32_t scan_disabled; |
| bool first_scan_done; |
| }; |
| |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| /** |
| * struct pno_def_config - def configuration for PNO |
| * @pno_offload_enabled: flag to check if PNO offload is enabled/disabled |
| * @channel_prediction: config PNO channel prediction feature status |
| * @top_k_num_of_channels: def top K number of channels are used for tanimoto |
| * distance calculation. |
| * @stationary_thresh: def threshold val to determine that STA is stationary. |
| * @pnoscan_adaptive_dwell_mode: def adaptive dwelltime mode for pno scan |
| * @channel_prediction_full_scan: def periodic timer upon which full scan needs |
| * to be triggered. |
| * @dfs_chnl_scan_enable: Enable dfs channel PNO scan |
| * @scan_support_enabled: PNO scan support enabled/disabled |
| * @scan_timer_repeat_value: PNO scan timer repeat value |
| * @slow_scan_multiplier: PNO slow scan timer multiplier |
| * @max_sched_scan_plan_interval: PNO scan interval |
| * @max_sched_scan_plan_iterations: PNO scan number of iterations |
| * @scan_backoff_multiplier: Scan banckoff multiplier |
| * @pno_wake_lock: pno wake lock |
| * @pno_cb: callback to call on PNO completion |
| * @mawc_params: Configuration parameters for NLO MAWC. |
| */ |
| struct pno_def_config { |
| bool pno_offload_enabled; |
| bool channel_prediction; |
| uint8_t top_k_num_of_channels; |
| uint8_t stationary_thresh; |
| enum scan_dwelltime_adaptive_mode adaptive_dwell_mode; |
| uint32_t channel_prediction_full_scan; |
| bool dfs_chnl_scan_enabled; |
| bool scan_support_enabled; |
| uint32_t scan_timer_repeat_value; |
| uint32_t slow_scan_multiplier; |
| uint32_t max_sched_scan_plan_interval; |
| uint32_t max_sched_scan_plan_iterations; |
| uint8_t scan_backoff_multiplier; |
| qdf_wake_lock_t pno_wake_lock; |
| struct cb_handler pno_cb; |
| struct nlo_mawc_params mawc_params; |
| }; |
| #endif |
| |
| #ifdef FEATURE_WLAN_EXTSCAN |
| /** |
| * struct extscan_def_config - def configuration for EXTSCAN |
| * @extscan_enabled: enable extscan |
| * @extscan_passive_max_chn_time: max passive channel time |
| * @extscan_passive_min_chn_time: min passive channel time |
| * @extscan_active_max_chn_time: max active channel time |
| * @extscan_active_min_chn_time: min active channel time |
| */ |
| struct extscan_def_config { |
| bool extscan_enabled; |
| uint32_t extscan_passive_max_chn_time; |
| uint32_t extscan_passive_min_chn_time; |
| uint32_t extscan_active_max_chn_time; |
| uint32_t extscan_active_min_chn_time; |
| }; |
| #endif |
| |
| /** |
| * struct scan_default_params - default scan parameters to be used |
| * @active_dwell: default active dwell time |
| * @allow_dfs_chan_in_first_scan: first scan should contain dfs channels or not. |
| * @allow_dfs_chan_in_scan: Scan DFS channels or not. |
| * @skip_dfs_chan_in_p2p_search: Skip DFS channels in p2p search. |
| * @use_wake_lock_in_user_scan: if wake lock will be acquired during user scan |
| * @active_dwell_2g: default active dwell time for 2G channels, if it's not zero |
| * @active_dwell_6g: default active dwell time for 6G channels |
| * @passive_dwell_6g: default passive dwell time for 6G channels |
| * @passive_dwell:default passive dwell time |
| * @max_rest_time: default max rest time |
| * @sta_miracast_mcc_rest_time: max rest time for miracast and mcc |
| * @min_rest_time: default min rest time |
| * @idle_time: default idle time |
| * @conc_active_dwell: default concurrent active dwell time |
| * @conc_passive_dwell: default concurrent passive dwell time |
| * @conc_max_rest_time: default concurrent max rest time |
| * @conc_min_rest_time: default concurrent min rest time |
| * @conc_idle_time: default concurrent idle time |
| * @repeat_probe_time: default repeat probe time |
| * @probe_spacing_time: default probe spacing time |
| * @probe_delay: default probe delay |
| * @burst_duration: default burst duration |
| * @max_scan_time: default max scan time |
| * @num_probes: default maximum number of probes to sent |
| * @cache_aging_time: default scan cache aging time |
| * @select_5gh_margin: Prefer connecting to 5G AP even if |
| * its RSSI is lower by select_5gh_margin dbm than 2.4G AP. |
| * applicable if prefer_5ghz is set. |
| * @is_bssid_hint_priority: True if bssid_hint is given priority |
| * @enable_mac_spoofing: enable mac address spoof in scan |
| * @max_bss_per_pdev: maximum number of bss entries to be maintained per pdev |
| * @max_active_scans_allowed: maximum number of active parallel scan allowed |
| * per psoc |
| * @scan_mode_6g: scan mode in 6Ghz |
| * @enable_connected_scan: enable scans after connection |
| * @scan_priority: default scan priority |
| * @adaptive_dwell_time_mode: adaptive dwell mode with connection |
| * @adaptive_dwell_time_mode_nc: adaptive dwell mode without connection |
| * @honour_nl_scan_policy_flags: honour nl80211 scan policy flags |
| * @extscan_adaptive_dwell_mode: Adaptive dwell mode during ext scan |
| * @scan_f_passive: passively scan all channels including active channels |
| * @scan_f_bcast_probe: add wild card ssid prbreq even if ssid_list is specified |
| * @scan_f_cck_rates: add cck rates to rates/xrates ie in prb req |
| * @scan_f_ofdm_rates: add ofdm rates to rates/xrates ie in prb req |
| * @scan_f_chan_stat_evnt: enable indication of chan load and noise floor |
| * @scan_f_filter_prb_req: filter Probe request frames |
| * @scan_f_bypass_dfs_chn: when set, do not scan DFS channels |
| * @scan_f_continue_on_err:continue scan even if few certain erros have occurred |
| * @scan_f_offchan_mgmt_tx: allow mgmt transmission during off channel scan |
| * @scan_f_offchan_data_tx: allow data transmission during off channel scan |
| * @scan_f_promisc_mode: scan with promiscuous mode |
| * @scan_f_capture_phy_err: enable capture ppdu with phy errrors |
| * @scan_f_strict_passive_pch: do passive scan on passive channels |
| * @scan_f_half_rate: enable HALF (10MHz) rate support |
| * @scan_f_quarter_rate: set Quarter (5MHz) rate support |
| * @scan_f_force_active_dfs_chn: allow to send probe req on DFS channel |
| * @scan_f_add_tpc_ie_in_probe: add TPC ie in probe req frame |
| * @scan_f_add_ds_ie_in_probe: add DS ie in probe req frame |
| * @scan_f_add_spoofed_mac_in_probe: use random mac address for TA in probe |
| * @scan_f_add_rand_seq_in_probe: use random sequence number in probe |
| * @scan_f_en_ie_whitelist_in_probe: enable ie whitelist in probe |
| * @scan_f_forced: force scan even in presence of data traffic |
| * @scan_f_2ghz: scan 2.4 GHz channels |
| * @scan_f_5ghz: scan 5 GHz channels |
| * @scan_f_wide_band: scan in 40 MHz or higher bandwidth |
| * @scan_flags: variable to read and set scan_f_* flags in one shot |
| * can be used to dump all scan_f_* flags for debug |
| * @scan_ev_started: notify scan started event |
| * @scan_ev_completed: notify scan completed event |
| * @scan_ev_bss_chan: notify bss chan event |
| * @scan_ev_foreign_chan: notify foreign chan event |
| * @scan_ev_dequeued: notify scan request dequed event |
| * @scan_ev_preempted: notify scan preempted event |
| * @scan_ev_start_failed: notify scan start failed event |
| * @scan_ev_restarted: notify scan restarted event |
| * @scan_ev_foreign_chn_exit: notify foreign chan exit event |
| * @scan_ev_invalid: notify invalid scan request event |
| * @scan_ev_gpio_timeout: notify gpio timeout event |
| * @scan_ev_suspended: notify scan suspend event |
| * @scan_ev_resumed: notify scan resumed event |
| * @scan_events: variable to read and set scan_ev_* flags in one shot |
| * can be used to dump all scan_ev_* flags for debug |
| * @roam_params: roam related params |
| */ |
| struct scan_default_params { |
| uint32_t active_dwell; |
| bool allow_dfs_chan_in_first_scan; |
| bool allow_dfs_chan_in_scan; |
| bool skip_dfs_chan_in_p2p_search; |
| bool use_wake_lock_in_user_scan; |
| uint32_t active_dwell_2g; |
| uint32_t active_dwell_6g; |
| uint32_t passive_dwell_6g; |
| uint32_t passive_dwell; |
| uint32_t max_rest_time; |
| uint32_t sta_miracast_mcc_rest_time; |
| uint32_t min_rest_time; |
| uint32_t idle_time; |
| uint32_t conc_active_dwell; |
| uint32_t conc_passive_dwell; |
| uint32_t conc_max_rest_time; |
| uint32_t conc_min_rest_time; |
| uint32_t conc_idle_time; |
| uint32_t repeat_probe_time; |
| uint32_t probe_spacing_time; |
| uint32_t probe_delay; |
| uint32_t burst_duration; |
| uint32_t max_scan_time; |
| uint32_t num_probes; |
| qdf_time_t scan_cache_aging_time; |
| uint32_t select_5ghz_margin; |
| bool enable_mac_spoofing; |
| bool is_bssid_hint_priority; |
| uint32_t usr_cfg_probe_rpt_time; |
| uint32_t usr_cfg_num_probes; |
| uint16_t max_bss_per_pdev; |
| uint32_t max_active_scans_allowed; |
| uint8_t sta_scan_burst_duration; |
| uint8_t p2p_scan_burst_duration; |
| uint8_t go_scan_burst_duration; |
| uint8_t ap_scan_burst_duration; |
| enum scan_mode_6ghz scan_mode_6g; |
| bool enable_connected_scan; |
| enum scan_priority scan_priority; |
| enum scan_dwelltime_adaptive_mode adaptive_dwell_time_mode; |
| enum scan_dwelltime_adaptive_mode adaptive_dwell_time_mode_nc; |
| bool honour_nl_scan_policy_flags; |
| enum scan_dwelltime_adaptive_mode extscan_adaptive_dwell_mode; |
| union { |
| struct { |
| uint32_t scan_f_passive:1, |
| scan_f_bcast_probe:1, |
| scan_f_cck_rates:1, |
| scan_f_ofdm_rates:1, |
| scan_f_chan_stat_evnt:1, |
| scan_f_filter_prb_req:1, |
| scan_f_bypass_dfs_chn:1, |
| scan_f_continue_on_err:1, |
| scan_f_offchan_mgmt_tx:1, |
| scan_f_offchan_data_tx:1, |
| scan_f_promisc_mode:1, |
| scan_f_capture_phy_err:1, |
| scan_f_strict_passive_pch:1, |
| scan_f_half_rate:1, |
| scan_f_quarter_rate:1, |
| scan_f_force_active_dfs_chn:1, |
| scan_f_add_tpc_ie_in_probe:1, |
| scan_f_add_ds_ie_in_probe:1, |
| scan_f_add_spoofed_mac_in_probe:1, |
| scan_f_add_rand_seq_in_probe:1, |
| scan_f_en_ie_whitelist_in_probe:1, |
| scan_f_forced:1, |
| scan_f_2ghz:1, |
| scan_f_5ghz:1, |
| scan_f_wide_band:1; |
| }; |
| uint32_t scan_flags; |
| }; |
| union { |
| struct { |
| uint32_t scan_ev_started:1, |
| scan_ev_completed:1, |
| scan_ev_bss_chan:1, |
| scan_ev_foreign_chan:1, |
| scan_ev_dequeued:1, |
| scan_ev_preempted:1, |
| scan_ev_start_failed:1, |
| scan_ev_restarted:1, |
| scan_ev_foreign_chn_exit:1, |
| scan_ev_invalid:1, |
| scan_ev_gpio_timeout:1, |
| scan_ev_suspended:1, |
| scan_ev_resumed:1; |
| }; |
| uint32_t scan_events; |
| }; |
| struct scoring_config score_config; |
| }; |
| |
| /** |
| * struct scan_cb - nif/sif function callbacks |
| * @inform_beacon: cb to indicate frame to OS |
| * @update_beacon: cb to indicate frame to MLME |
| * @unlink_bss: cb to unlink bss from kernel cache |
| */ |
| struct scan_cb { |
| update_beacon_cb inform_beacon; |
| update_beacon_cb update_beacon; |
| update_beacon_cb unlink_bss; |
| /* Define nif/sif function callbacks here */ |
| }; |
| |
| /** |
| * struct wlan_scan_obj - scan object definition |
| * @scan_disabled: if scan is disabled |
| * @scan_db: scan cache data base |
| * @cc_db: pointer of country code data base |
| * @lock: spin lock |
| * @scan_def: default scan parameters |
| * @cb: nif/sif function callbacks |
| * @requesters: requester allocation pool |
| * @scan_ids: last allocated scan id |
| * @global_evhandlers: registered scan event handlers |
| * @pdev_info: pointer to pdev info |
| * @pno_cfg: default pno configuration |
| * @extscan_cfg: default extscan configuration |
| * @ie_whitelist: default ie whitelist attrs |
| * @bt_a2dp_enabled: if bt a2dp is enabled |
| * @miracast_enabled: miracast enabled |
| * @disable_timeout: command timeout disabled |
| * @drop_bcn_on_chan_mismatch: drop bcn if channel mismatch |
| * @scan_start_request_buff: buffer used to pass |
| * scan config to event handlers |
| */ |
| struct wlan_scan_obj { |
| uint32_t scan_disabled; |
| qdf_spinlock_t lock; |
| qdf_atomic_t scan_ids; |
| struct scan_dbs scan_db[WLAN_UMAC_MAX_PDEVS]; |
| struct scan_country_code_db *cc_db; |
| struct scan_default_params scan_def; |
| struct scan_cb cb; |
| struct scan_requester_info requesters[WLAN_MAX_REQUESTORS]; |
| struct global_scan_ev_handlers global_evhandlers; |
| struct pdev_scan_info pdev_info[WLAN_UMAC_MAX_PDEVS]; |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| struct pno_def_config pno_cfg; |
| #endif |
| #ifdef FEATURE_WLAN_EXTSCAN |
| struct extscan_def_config extscan_cfg; |
| #endif |
| struct probe_req_whitelist_attr ie_whitelist; |
| bool bt_a2dp_enabled; |
| bool miracast_enabled; |
| bool disable_timeout; |
| bool drop_bcn_on_chan_mismatch; |
| struct scan_start_request scan_start_request_buff; |
| }; |
| |
| /** |
| * wlan_psoc_get_scan_obj() - private API to get scan object from psoc |
| * @psoc: psoc object |
| * |
| * Return: scan object |
| */ |
| #define wlan_psoc_get_scan_obj(psoc) \ |
| wlan_psoc_get_scan_obj_fl(psoc, \ |
| __func__, __LINE__) |
| |
| static inline struct wlan_scan_obj * |
| wlan_psoc_get_scan_obj_fl(struct wlan_objmgr_psoc *psoc, |
| const char *func, uint32_t line) |
| { |
| struct wlan_scan_obj *scan_obj; |
| |
| scan_obj = (struct wlan_scan_obj *) |
| wlan_objmgr_psoc_get_comp_private_obj(psoc, |
| WLAN_UMAC_COMP_SCAN); |
| if (!scan_obj) { |
| scm_err("%s:%u, Failed to get scan object", func, line); |
| return NULL; |
| } |
| return scan_obj; |
| } |
| |
| /** |
| * wlan_pdev_get_scan_obj() - private API to get scan object from pdev |
| * @psoc: pdev object |
| * |
| * Return: scan object |
| */ |
| static inline struct wlan_scan_obj * |
| wlan_pdev_get_scan_obj(struct wlan_objmgr_pdev *pdev) |
| { |
| struct wlan_objmgr_psoc *psoc; |
| |
| psoc = wlan_pdev_get_psoc(pdev); |
| |
| return wlan_psoc_get_scan_obj(psoc); |
| } |
| |
| /** |
| * wlan_vdev_get_scan_obj() - private API to get scan object from vdev |
| * @psoc: vdev object |
| * |
| * Return: scan object |
| */ |
| static inline struct wlan_scan_obj * |
| wlan_vdev_get_scan_obj(struct wlan_objmgr_vdev *vdev) |
| { |
| struct wlan_objmgr_pdev *pdev; |
| |
| pdev = wlan_vdev_get_pdev(vdev); |
| |
| return wlan_pdev_get_scan_obj(pdev); |
| } |
| |
| /** |
| * wlan_get_vdev_scan_obj() - private API to get scan object vdev |
| * @vdev: vdev object |
| * |
| * Return: scan object |
| */ |
| static inline struct scan_vdev_obj * |
| wlan_get_vdev_scan_obj(struct wlan_objmgr_vdev *vdev) |
| { |
| struct scan_vdev_obj *scan_vdev_obj; |
| |
| scan_vdev_obj = (struct scan_vdev_obj *) |
| wlan_objmgr_vdev_get_comp_private_obj(vdev, |
| WLAN_UMAC_COMP_SCAN); |
| |
| return scan_vdev_obj; |
| } |
| |
| /** |
| * wlan_scan_vdev_get_pdev_id() - private API to get pdev id from vdev object |
| * @vdev: vdev object |
| * |
| * Return: parent pdev id |
| */ |
| static inline uint8_t |
| wlan_scan_vdev_get_pdev_id(struct wlan_objmgr_vdev *vdev) |
| { |
| struct wlan_objmgr_pdev *pdev; |
| |
| pdev = wlan_vdev_get_pdev(vdev); |
| |
| return wlan_objmgr_pdev_get_pdev_id(pdev); |
| } |
| |
| /** |
| * wlan_pdev_get_pdev_scan_ev_handlers() - private API to get |
| * pdev scan event handlers |
| * @vdev: pdev object |
| * |
| * Return: pdev_scan_ev_handler object |
| */ |
| static inline struct pdev_scan_ev_handler* |
| wlan_pdev_get_pdev_scan_ev_handlers(struct wlan_objmgr_pdev *pdev) |
| { |
| uint8_t pdevid; |
| struct wlan_scan_obj *scan = NULL; |
| |
| if (!pdev) |
| goto err; |
| |
| pdevid = wlan_objmgr_pdev_get_pdev_id(pdev); |
| scan = wlan_pdev_get_scan_obj(pdev); |
| if (!scan) |
| goto err; |
| |
| return &scan->global_evhandlers.pdev_ev_handlers[pdevid]; |
| |
| err: |
| scm_err("NULL pointer, pdev: 0x%pK, scan_obj: 0x%pK", |
| pdev, scan); |
| return NULL; |
| } |
| |
| /** |
| * wlan_vdev_get_pdev_scan_ev_handlers() - private API to get |
| * pdev scan event handlers |
| * @vdev: vdev object |
| * |
| * Return: pdev_scan_ev_handler object |
| */ |
| static inline struct pdev_scan_ev_handler* |
| wlan_vdev_get_pdev_scan_ev_handlers(struct wlan_objmgr_vdev *vdev) |
| { |
| struct wlan_objmgr_pdev *pdev; |
| |
| pdev = wlan_vdev_get_pdev(vdev); |
| |
| return wlan_pdev_get_pdev_scan_ev_handlers(pdev); |
| } |
| |
| /** |
| * wlan_scan_psoc_get_def_params() - private API to get scan defaults |
| * @psoc: psoc object |
| * |
| * Return: scan defaults |
| */ |
| static inline struct scan_default_params* |
| wlan_scan_psoc_get_def_params(struct wlan_objmgr_psoc *psoc) |
| { |
| struct wlan_scan_obj *scan = NULL; |
| |
| if (!psoc) { |
| scm_err("null psoc"); |
| return NULL; |
| } |
| scan = wlan_psoc_get_scan_obj(psoc); |
| |
| if (!scan) |
| return NULL; |
| |
| return &scan->scan_def; |
| } |
| |
| /** |
| * wlan_vdev_get_def_scan_params() - private API to get scan defaults |
| * @vdev: vdev object |
| * |
| * Return: scan defaults |
| */ |
| static inline struct scan_default_params* |
| wlan_vdev_get_def_scan_params(struct wlan_objmgr_vdev *vdev) |
| { |
| struct wlan_objmgr_psoc *psoc = NULL; |
| |
| if (!vdev) { |
| scm_err("null vdev"); |
| return NULL; |
| } |
| psoc = wlan_vdev_get_psoc(vdev); |
| |
| return wlan_scan_psoc_get_def_params(psoc); |
| } |
| |
| /** |
| * wlan_scan_psoc_created_notification() - scan psoc create handler |
| * @psoc: psoc object |
| * @arg_list: Argument list |
| * |
| * Return: QDF_STATUS |
| */ |
| QDF_STATUS wlan_scan_psoc_created_notification(struct wlan_objmgr_psoc *psoc, |
| void *arg_list); |
| |
| /** |
| * wlan_scan_psoc_deleted_notification() - scan psoc delete handler |
| * @psoc: psoc object |
| * @arg_list: Argument list |
| * |
| * Return: QDF_STATUS |
| */ |
| QDF_STATUS wlan_scan_psoc_destroyed_notification(struct wlan_objmgr_psoc *psoc, |
| void *arg_list); |
| |
| /** |
| * wlan_scan_vdev_created_notification() - scan psoc create handler |
| * @vdev: vdev object |
| * @arg_list: Argument list |
| * |
| * Return: QDF_STATUS |
| */ |
| QDF_STATUS wlan_scan_vdev_created_notification(struct wlan_objmgr_vdev *vdev, |
| void *arg_list); |
| |
| /** |
| * wlan_scan_vdev_destroyed_notification() - scan psoc delete handler |
| * @vdev: vdev object |
| * @arg_list: Argument list |
| * |
| * Return: QDF_STATUS |
| */ |
| QDF_STATUS wlan_scan_vdev_destroyed_notification(struct wlan_objmgr_vdev *vdev, |
| void *arg_list); |
| |
| #endif |