qcacmn: Define test config for HE OM control config
Add a new wifi test config QCA vendor attribute to configure
HE operating mode control field bandwidth and number of
spatial streams.
Change-Id: Ibe70d28329353e48c7bb323ab367c63be9706038
CRs-Fixed: 2320749
diff --git a/os_if/linux/qca_vendor.h b/os_if/linux/qca_vendor.h
index 5dc5571..18737b9 100644
--- a/os_if/linux/qca_vendor.h
+++ b/os_if/linux/qca_vendor.h
@@ -5952,6 +5952,23 @@
QCA_WLAN_HE_16US_OF_PROCESS_TIME = 2,
};
+/**
+ * enum qca_wlan_he_om_ctrl_ch_bw - HE OM control field BW configuration
+ *
+ * Indicates the HE Operating mode control channel width setting value.
+ *
+ * @QCA_WLAN_HE_OM_CTRL_BW_20M: Primary 20 MHz
+ * @QCA_WLAN_HE_OM_CTRL_BW_40M: Primary 40 MHz
+ * @QCA_WLAN_HE_OM_CTRL_BW_80M: Primary 80 MHz
+ * @QCA_WLAN_HE_OM_CTRL_BW_160M: 160 MHz and 80+80 MHz
+ */
+enum qca_wlan_he_om_ctrl_ch_bw {
+ QCA_WLAN_HE_OM_CTRL_BW_20M = 0,
+ QCA_WLAN_HE_OM_CTRL_BW_40M = 1,
+ QCA_WLAN_HE_OM_CTRL_BW_80M = 2,
+ QCA_WLAN_HE_OM_CTRL_BW_160M = 3,
+};
+
/* Attributes for data used by
* QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION
*/
@@ -6143,6 +6160,44 @@
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_RESUME = 26,
+ /* 8-bit unsigned value to set the HE operating mode control
+ * (OM CTRL) Channel Width subfield.
+ * The Channel Width subfield indicates the operating channel width
+ * supported by the STA for both reception and transmission.
+ * Uses the enum qca_wlan_he_om_ctrl_ch_bw values.
+ * This setting is cleared with the
+ * QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG
+ * flag attribute to reset defaults.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_BW = 27,
+
+ /* 8-bit unsigned value to configure the number of spatial
+ * streams in HE operating mode control field.
+ * This setting is cleared with the
+ * QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG
+ * flag attribute to reset defaults.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_NSS = 28,
+
+ /* Flag attribute to configure the UL MU disable bit in
+ * HE operating mode control field.
+ * This setting is cleared with the
+ * QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG
+ * flag attribute to reset defaults.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_UL_MU_DISABLE = 29,
+
+ /* Flag attribute to clear the previously set HE operating mode
+ * control field configuration.
+ * This attribute is used to configure the testbed device to reset
+ * defaults to clear any previously set HE operating mode control
+ * field configuration.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG = 30,
+
/* keep last */
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX =