| /* |
| * Copyright (c) 2013-2016 The Linux Foundation. All rights reserved. |
| * |
| * Previously licensed under the ISC license by Qualcomm Atheros, Inc. |
| * |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /* |
| * This file was originally distributed by Qualcomm Atheros, Inc. |
| * under proprietary terms before Copyright ownership was assigned |
| * to the Linux Foundation. |
| */ |
| |
| /** |
| * @addtogroup WMIAPI |
| ***@{ |
| */ |
| |
| /** @file |
| * This file specifies the WMI interface for the Software Architecture. |
| * |
| * It includes definitions of all the commands and events. Commands are messages |
| * from the host to the target. Events and Replies are messages from the target |
| * to the host. |
| * |
| * Ownership of correctness in regards to WMI commands |
| * belongs to the host driver and the target is not required to validate |
| * parameters for value, proper range, or any other checking. |
| * |
| * Guidelines for extending this interface are below. |
| * |
| * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff |
| * 2. Use ONLY A_UINT32 type for defining member variables within WMI command/event |
| * structures. Do not use A_UINT8, A_UINT16, A_BOOL or enum types within these structures. |
| * 3. DO NOT define bit fields within structures. Implement bit fields using masks |
| * if necessary. Do not use the programming language's bit field definition. |
| * 4. Define macros for encode/decode of A_UINT8, A_UINT16 fields within the A_UINT32 |
| * variables. Use these macros for set/get of these fields. Try to use this to |
| * optimize the structure without bloating it with A_UINT32 variables for every lower |
| * sized field. |
| * 5. Do not use PACK/UNPACK attributes for the structures as each member variable is |
| * already 4-byte aligned by virtue of being a A_UINT32 type. |
| * 6. Comment each parameter part of the WMI command/event structure by using the |
| * 2 stars at the begining of C comment instead of one star to enable HTML document |
| * generation using Doxygen. |
| * |
| */ |
| |
| #ifndef _WMI_UNIFIED_H_ |
| #define _WMI_UNIFIED_H_ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #include <wlan_defs.h> |
| #include <wmi_services.h> |
| #include <dbglog.h> |
| |
| #define ATH_MAC_LEN 6 /**< length of MAC in bytes */ |
| #define WMI_EVENT_STATUS_SUCCESS 0 /* Success return status to host */ |
| #define WMI_EVENT_STATUS_FAILURE 1 /* Failure return status to host */ |
| |
| #define MAX_TX_RATE_VALUES 10 /*Max Tx Rates */ |
| #define MAX_RSSI_VALUES 10 /*Max Rssi values */ |
| |
| /* The WLAN_MAX_AC macro cannot be changed without breaking |
| * WMI compatibility. |
| * The maximum value of access category |
| */ |
| #define WLAN_MAX_AC 4 |
| |
| /* |
| * These don't necessarily belong here; but as the MS/SM macros require |
| * ar6000_internal.h to be included, it may not be defined as yet. |
| */ |
| #define WMI_F_MS(_v, _f) \ |
| (((_v) & (_f)) >> (_f ## _S)) |
| |
| /* |
| * This breaks the "good macro practice" of only referencing each |
| * macro field once (to avoid things like field++ from causing issues.) |
| */ |
| #define WMI_F_RMW(_var, _v, _f) \ |
| do { \ |
| (_var) &= ~(_f); \ |
| (_var) |= (((_v) << (_f ## _S)) & (_f)); \ |
| } while (0) |
| |
| #define WMI_GET_BITS(_val, _index, _num_bits) \ |
| (((_val) >> (_index)) & ((1 << (_num_bits)) - 1)) |
| |
| #define WMI_SET_BITS(_var, _index, _num_bits, _val) do { \ |
| (_var) &= ~(((1 << (_num_bits)) - 1) << (_index)); \ |
| (_var) |= (((_val) & ((1 << (_num_bits)) - 1)) << (_index)); \ |
| } while (0) |
| |
| /** |
| * A packed array is an array where each entry in the array is less than |
| * or equal to 16 bits, and the entries are stuffed into an A_UINT32 array. |
| * For example, if each entry in the array is 11 bits, then you can stuff |
| * an array of 4 11-bit values into an array of 2 A_UINT32 values. |
| * The first 2 11-bit values will be stored in the first A_UINT32, |
| * and the last 2 11-bit values will be stored in the second A_UINT32. |
| */ |
| #define WMI_PACKED_ARR_SIZE(num_entries, bits_per_entry) \ |
| (((num_entries) / (32 / (bits_per_entry))) + \ |
| (((num_entries) % (32 / (bits_per_entry))) ? 1 : 0)) |
| |
| static inline A_UINT32 wmi_packed_arr_get_bits(A_UINT32 *arr, |
| A_UINT32 entry_index, A_UINT32 bits_per_entry) |
| { |
| A_UINT32 entries_per_uint = (32 / bits_per_entry); |
| A_UINT32 uint_index = (entry_index / entries_per_uint); |
| A_UINT32 num_entries_in_prev_uints = (uint_index * entries_per_uint); |
| A_UINT32 index_in_uint = (entry_index - num_entries_in_prev_uints); |
| A_UINT32 start_bit_in_uint = (index_in_uint * bits_per_entry); |
| return (arr[uint_index] >> start_bit_in_uint) & |
| ((1 << bits_per_entry) - 1); |
| } |
| |
| static inline void wmi_packed_arr_set_bits(A_UINT32 *arr, A_UINT32 entry_index, |
| A_UINT32 bits_per_entry, A_UINT32 val) |
| { |
| A_UINT32 entries_per_uint = (32 / bits_per_entry); |
| A_UINT32 uint_index = (entry_index / entries_per_uint); |
| A_UINT32 num_entries_in_prev_uints = (uint_index * entries_per_uint); |
| A_UINT32 index_in_uint = (entry_index - num_entries_in_prev_uints); |
| A_UINT32 start_bit_in_uint = (index_in_uint * bits_per_entry); |
| |
| arr[uint_index] &= ~(((1 << bits_per_entry) - 1) << start_bit_in_uint); |
| arr[uint_index] |= |
| ((val & ((1 << bits_per_entry) - 1)) << start_bit_in_uint); |
| } |
| |
| /** 2 word representation of MAC addr */ |
| typedef struct { |
| /** upper 4 bytes of MAC address */ |
| A_UINT32 mac_addr31to0; |
| /** lower 2 bytes of MAC address */ |
| A_UINT32 mac_addr47to32; |
| } wmi_mac_addr; |
| |
| /** macro to convert MAC address from WMI word format to char array */ |
| #define WMI_MAC_ADDR_TO_CHAR_ARRAY(pwmi_mac_addr, c_macaddr) do { \ |
| (c_macaddr)[0] = ((pwmi_mac_addr)->mac_addr31to0) & 0xff; \ |
| (c_macaddr)[1] = (((pwmi_mac_addr)->mac_addr31to0) >> 8) & 0xff; \ |
| (c_macaddr)[2] = (((pwmi_mac_addr)->mac_addr31to0) >> 16) & 0xff; \ |
| (c_macaddr)[3] = (((pwmi_mac_addr)->mac_addr31to0) >> 24) & 0xff; \ |
| (c_macaddr)[4] = ((pwmi_mac_addr)->mac_addr47to32) & 0xff; \ |
| (c_macaddr)[5] = (((pwmi_mac_addr)->mac_addr47to32) >> 8) & 0xff; \ |
| } while (0) |
| |
| /** macro to convert MAC address from char array to WMI word format */ |
| #define WMI_CHAR_ARRAY_TO_MAC_ADDR(c_macaddr, pwmi_mac_addr) do { \ |
| (pwmi_mac_addr)->mac_addr31to0 = \ |
| ((c_macaddr)[0] | ((c_macaddr)[1] << 8) \ |
| | ((c_macaddr)[2] << 16) | ((c_macaddr)[3] << 24)); \ |
| (pwmi_mac_addr)->mac_addr47to32 = \ |
| ((c_macaddr)[4] | ((c_macaddr)[5] << 8)); \ |
| } while (0) |
| |
| /* |
| * wmi command groups. |
| */ |
| typedef enum { |
| /* 0 to 2 are reserved */ |
| WMI_GRP_START = 0x3, |
| WMI_GRP_SCAN = WMI_GRP_START, |
| WMI_GRP_PDEV, |
| WMI_GRP_VDEV, |
| WMI_GRP_PEER, |
| WMI_GRP_MGMT, |
| WMI_GRP_BA_NEG, |
| WMI_GRP_STA_PS, |
| WMI_GRP_DFS, |
| WMI_GRP_ROAM, |
| WMI_GRP_OFL_SCAN, |
| WMI_GRP_P2P, |
| WMI_GRP_AP_PS, |
| WMI_GRP_RATE_CTRL, |
| WMI_GRP_PROFILE, |
| WMI_GRP_SUSPEND, |
| WMI_GRP_BCN_FILTER, |
| WMI_GRP_WOW, |
| WMI_GRP_RTT, |
| WMI_GRP_SPECTRAL, |
| WMI_GRP_STATS, |
| WMI_GRP_ARP_NS_OFL, |
| WMI_GRP_NLO_OFL, |
| WMI_GRP_GTK_OFL, |
| WMI_GRP_CSA_OFL, |
| WMI_GRP_CHATTER, |
| WMI_GRP_TID_ADDBA, |
| WMI_GRP_MISC, |
| WMI_GRP_GPIO, |
| WMI_GRP_FWTEST, |
| WMI_GRP_TDLS, |
| WMI_GRP_RESMGR, |
| WMI_GRP_STA_SMPS, |
| WMI_GRP_WLAN_HB, |
| WMI_GRP_RMC, |
| WMI_GRP_MHF_OFL, |
| WMI_GRP_LOCATION_SCAN, |
| WMI_GRP_OEM, |
| WMI_GRP_NAN, |
| WMI_GRP_COEX, |
| WMI_GRP_OBSS_OFL, |
| WMI_GRP_LPI, |
| WMI_GRP_EXTSCAN, |
| WMI_GRP_DHCP_OFL, |
| WMI_GRP_IPA, |
| WMI_GRP_MDNS_OFL, |
| WMI_GRP_SAP_OFL, |
| WMI_GRP_OCB, |
| WMI_GRP_SOC, |
| WMI_GRP_PKT_FILTER, |
| WMI_GRP_MAWC, |
| WMI_GRP_PMF_OFFLOAD, |
| WMI_GRP_BPF_OFFLOAD, /* Berkeley Packet Filter */ |
| WMI_GRP_NAN_DATA, |
| } WMI_GRP_ID; |
| |
| #define WMI_CMD_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) |
| #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) |
| |
| /** |
| * Command IDs and commange events |
| */ |
| typedef enum { |
| /** initialize the wlan sub system */ |
| WMI_INIT_CMDID = 0x1, |
| |
| /* Scan specific commands */ |
| |
| /** start scan request to FW */ |
| WMI_START_SCAN_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_SCAN), |
| /** stop scan request to FW */ |
| WMI_STOP_SCAN_CMDID, |
| /** full list of channels as defined by the regulatory that will be used by scanner */ |
| WMI_SCAN_CHAN_LIST_CMDID, |
| /** overwrite default priority table in scan scheduler */ |
| WMI_SCAN_SCH_PRIO_TBL_CMDID, |
| /** This command to adjust the priority and min.max_rest_time |
| * of an on ongoing scan request. |
| */ |
| WMI_SCAN_UPDATE_REQUEST_CMDID, |
| |
| /** set OUI to be used in probe request if enabled */ |
| WMI_SCAN_PROB_REQ_OUI_CMDID, |
| |
| /* PDEV(physical device) specific commands */ |
| /** set regulatorty ctl id used by FW to determine the exact ctl power limits */ |
| WMI_PDEV_SET_REGDOMAIN_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_PDEV), |
| /** set channel. mainly used for supporting monitor mode */ |
| WMI_PDEV_SET_CHANNEL_CMDID, |
| /** set pdev specific parameters */ |
| WMI_PDEV_SET_PARAM_CMDID, |
| /** enable packet log */ |
| WMI_PDEV_PKTLOG_ENABLE_CMDID, |
| /** disable packet log*/ |
| WMI_PDEV_PKTLOG_DISABLE_CMDID, |
| /** set wmm parameters */ |
| WMI_PDEV_SET_WMM_PARAMS_CMDID, |
| /** set HT cap ie that needs to be carried probe requests HT/VHT channels */ |
| WMI_PDEV_SET_HT_CAP_IE_CMDID, |
| /** set VHT cap ie that needs to be carried on probe requests on VHT channels */ |
| WMI_PDEV_SET_VHT_CAP_IE_CMDID, |
| |
| /** Command to send the DSCP-to-TID map to the target */ |
| WMI_PDEV_SET_DSCP_TID_MAP_CMDID, |
| /** set quiet ie parameters. primarily used in AP mode */ |
| WMI_PDEV_SET_QUIET_MODE_CMDID, |
| /** Enable/Disable Green AP Power Save */ |
| WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, |
| /** get TPC config for the current operating channel */ |
| WMI_PDEV_GET_TPC_CONFIG_CMDID, |
| |
| /** set the base MAC address for the physical device before a VDEV is created. |
| * For firmware that doesn't support this feature and this command, the pdev |
| * MAC address will not be changed. */ |
| WMI_PDEV_SET_BASE_MACADDR_CMDID, |
| |
| /* eeprom content dump , the same to bdboard data */ |
| WMI_PDEV_DUMP_CMDID, |
| /* set LED configuration */ |
| WMI_PDEV_SET_LED_CONFIG_CMDID, |
| /* Get Current temprature of chip in Celcius degree */ |
| WMI_PDEV_GET_TEMPERATURE_CMDID, |
| /* Set LED flashing behavior */ |
| WMI_PDEV_SET_LED_FLASHING_CMDID, |
| /** Enable/Disable Smart Antenna */ |
| WMI_PDEV_SMART_ANT_ENABLE_CMDID, |
| /** Set Smart Antenna RX antenna*/ |
| WMI_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, |
| /** Override the antenna switch table */ |
| WMI_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, |
| /** Override the CTL table */ |
| WMI_PDEV_SET_CTL_TABLE_CMDID, |
| /** Override the array gain table */ |
| WMI_PDEV_SET_MIMOGAIN_TABLE_CMDID, |
| /** FIPS test mode command */ |
| WMI_PDEV_FIPS_CMDID, |
| /** get CCK ANI level */ |
| WMI_PDEV_GET_ANI_CCK_CONFIG_CMDID, |
| /** get OFDM ANI level */ |
| WMI_PDEV_GET_ANI_OFDM_CONFIG_CMDID, |
| /** NF Cal Power dBr/dBm */ |
| WMI_PDEV_GET_NFCAL_POWER_CMDID, |
| /** TxPPDU TPC */ |
| WMI_PDEV_GET_TPC_CMDID, |
| /* Set to enable MIB stats collection */ |
| WMI_MIB_STATS_ENABLE_CMDID, |
| |
| /** Set preferred channel list for DBS Mgr */ |
| WMI_PDEV_SET_PCL_CMDID, |
| /** Set HW mode. Eg: single MAC, DBS & SBS, |
| * see soc_hw_mode_t for values |
| */ |
| WMI_PDEV_SET_HW_MODE_CMDID, |
| /** Set DFS, SCAN modes and other FW configurations */ |
| WMI_PDEV_SET_MAC_CONFIG_CMDID, |
| /** Set per band and per pdev antenna chains */ |
| WMI_PDEV_SET_ANTENNA_MODE_CMDID, |
| |
| /* VDEV(virtual device) specific commands */ |
| /** vdev create */ |
| WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_VDEV), |
| /** vdev delete */ |
| WMI_VDEV_DELETE_CMDID, |
| /** vdev start request */ |
| WMI_VDEV_START_REQUEST_CMDID, |
| /** vdev restart request (RX only, NO TX, used for CAC period)*/ |
| WMI_VDEV_RESTART_REQUEST_CMDID, |
| /** vdev up request */ |
| WMI_VDEV_UP_CMDID, |
| /** vdev stop request */ |
| WMI_VDEV_STOP_CMDID, |
| /** vdev down request */ |
| WMI_VDEV_DOWN_CMDID, |
| /* set a vdev param */ |
| WMI_VDEV_SET_PARAM_CMDID, |
| /* set a key (used for setting per peer unicast and per vdev multicast) */ |
| WMI_VDEV_INSTALL_KEY_CMDID, |
| |
| /* wnm sleep mode command */ |
| WMI_VDEV_WNM_SLEEPMODE_CMDID, |
| WMI_VDEV_WMM_ADDTS_CMDID, |
| WMI_VDEV_WMM_DELTS_CMDID, |
| WMI_VDEV_SET_WMM_PARAMS_CMDID, |
| WMI_VDEV_SET_GTX_PARAMS_CMDID, |
| WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMDID, |
| |
| WMI_VDEV_PLMREQ_START_CMDID, |
| WMI_VDEV_PLMREQ_STOP_CMDID, |
| /* TSF timestamp action for specified vdev */ |
| WMI_VDEV_TSF_TSTAMP_ACTION_CMDID, |
| /* |
| * set the additional IEs in probe requests for scan or |
| * assoc req etc for frames FW locally generates |
| */ |
| WMI_VDEV_SET_IE_CMDID, |
| |
| WMI_VDEV_RATEMASK_CMDID, |
| /** ATF VDEV REQUEST commands. */ |
| WMI_VDEV_ATF_REQUEST_CMDID, |
| /** Command to send the DSCP-to-TID map to the target for VAP */ |
| WMI_VDEV_SET_DSCP_TID_MAP_CMDID, |
| /* |
| * Configure filter for Neighbor Rx Pkt |
| * (smart mesh selective listening) |
| */ |
| WMI_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID, |
| /** set quiet ie parameters. primarily used in AP mode */ |
| WMI_VDEV_SET_QUIET_MODE_CMDID, |
| |
| /* peer specific commands */ |
| |
| /** create a peer */ |
| WMI_PEER_CREATE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_PEER), |
| /** delete a peer */ |
| WMI_PEER_DELETE_CMDID, |
| /** flush specific tid queues of a peer */ |
| WMI_PEER_FLUSH_TIDS_CMDID, |
| /** set a parameter of a peer */ |
| WMI_PEER_SET_PARAM_CMDID, |
| /** set peer to associated state. will cary all parameters determined during assocication time */ |
| WMI_PEER_ASSOC_CMDID, |
| /**add a wds (4 address ) entry. used only for testing WDS feature on AP products */ |
| WMI_PEER_ADD_WDS_ENTRY_CMDID, |
| /**remove wds (4 address ) entry. used only for testing WDS feature on AP products */ |
| WMI_PEER_REMOVE_WDS_ENTRY_CMDID, |
| /** set up mcast group infor for multicast to unicast conversion */ |
| WMI_PEER_MCAST_GROUP_CMDID, |
| /** request peer info from FW. FW shall respond with PEER_INFO_EVENTID */ |
| WMI_PEER_INFO_REQ_CMDID, |
| |
| /** request the estimated link speed for the peer. FW shall respond with |
| * WMI_PEER_ESTIMATED_LINKSPEED_EVENTID. |
| */ |
| WMI_PEER_GET_ESTIMATED_LINKSPEED_CMDID, |
| /* |
| * Set the conditions to report peer justified rate to driver |
| * The justified rate means the the user-rate is justified by PER. |
| */ |
| WMI_PEER_SET_RATE_REPORT_CONDITION_CMDID, |
| /** update a wds (4 address) entry */ |
| WMI_PEER_UPDATE_WDS_ENTRY_CMDID, |
| /** add a proxy sta entry */ |
| WMI_PEER_ADD_PROXY_STA_ENTRY_CMDID, |
| /** Set Smart Antenna TX antenna */ |
| WMI_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, |
| /** Set Smart Antenna TX train info */ |
| WMI_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, |
| /** Set SA node config options */ |
| WMI_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, |
| /** ATF PEER REQUEST commands */ |
| WMI_PEER_ATF_REQUEST_CMDID, |
| |
| /* beacon/management specific commands */ |
| |
| /** transmit beacon by reference . used for transmitting beacon on low latency interface like pcie */ |
| WMI_BCN_TX_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_MGMT), |
| /** transmit beacon by value */ |
| WMI_PDEV_SEND_BCN_CMDID, |
| /** set the beacon template. used in beacon offload mode to setup the |
| * the common beacon template with the FW to be used by FW to generate beacons */ |
| WMI_BCN_TMPL_CMDID, |
| /** set beacon filter with FW */ |
| WMI_BCN_FILTER_RX_CMDID, |
| /* enable/disable filtering of probe requests in the firmware */ |
| WMI_PRB_REQ_FILTER_RX_CMDID, |
| /** transmit management frame by value. will be deprecated */ |
| WMI_MGMT_TX_CMDID, |
| /** set the probe response template. used in beacon offload mode to setup the |
| * the common probe response template with the FW to be used by FW to generate |
| * probe responses */ |
| WMI_PRB_TMPL_CMDID, |
| /** Transmit Mgmt frame by reference */ |
| WMI_MGMT_TX_SEND_CMDID, |
| |
| /** commands to directly control ba negotiation directly from host. only used in test mode */ |
| |
| /** turn off FW Auto addba mode and let host control addba */ |
| WMI_ADDBA_CLEAR_RESP_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_BA_NEG), |
| /** send add ba request */ |
| WMI_ADDBA_SEND_CMDID, |
| WMI_ADDBA_STATUS_CMDID, |
| /** send del ba */ |
| WMI_DELBA_SEND_CMDID, |
| /** set add ba response will be used by FW to generate addba response*/ |
| WMI_ADDBA_SET_RESP_CMDID, |
| /** send single VHT MPDU with AMSDU */ |
| WMI_SEND_SINGLEAMSDU_CMDID, |
| |
| /** Station power save specific config */ |
| /** enable/disable station powersave */ |
| WMI_STA_POWERSAVE_MODE_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_STA_PS), |
| /** set station power save specific parameter */ |
| WMI_STA_POWERSAVE_PARAM_CMDID, |
| /** set station mimo powersave mode */ |
| WMI_STA_MIMO_PS_MODE_CMDID, |
| |
| /** DFS-specific commands */ |
| /** enable DFS (radar detection)*/ |
| WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_DFS), |
| /** disable DFS (radar detection)*/ |
| WMI_PDEV_DFS_DISABLE_CMDID, |
| /** enable DFS phyerr/parse filter offload */ |
| WMI_DFS_PHYERR_FILTER_ENA_CMDID, |
| /** enable DFS phyerr/parse filter offload */ |
| WMI_DFS_PHYERR_FILTER_DIS_CMDID, |
| |
| /* Roaming specific commands */ |
| /** set roam scan mode */ |
| WMI_ROAM_SCAN_MODE = WMI_CMD_GRP_START_ID(WMI_GRP_ROAM), |
| /** set roam scan rssi threshold below which roam scan is enabled */ |
| WMI_ROAM_SCAN_RSSI_THRESHOLD, |
| /** set roam scan period for periodic roam scan mode */ |
| WMI_ROAM_SCAN_PERIOD, |
| /** set roam scan trigger rssi change threshold */ |
| WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, |
| /** set roam AP profile */ |
| WMI_ROAM_AP_PROFILE, |
| /** set channel list for roam scans */ |
| WMI_ROAM_CHAN_LIST, |
| /** Stop scan command */ |
| WMI_ROAM_SCAN_CMD, |
| /** roaming sme offload sync complete */ |
| WMI_ROAM_SYNCH_COMPLETE, |
| /** set ric request element for 11r roaming */ |
| WMI_ROAM_SET_RIC_REQUEST_CMDID, |
| /** Invoke roaming forcefully */ |
| WMI_ROAM_INVOKE_CMDID, |
| /** roaming filter cmd to allow further filtering of roaming candidate */ |
| WMI_ROAM_FILTER_CMDID, |
| /** set gateway ip, mac and retries for subnet change detection */ |
| WMI_ROAM_SUBNET_CHANGE_CONFIG_CMDID, |
| /** configure thresholds for MAWC */ |
| WMI_ROAM_CONFIGURE_MAWC_CMDID, |
| /** configure MultiBand Operation(refer WFA MBO spec) parameter */ |
| WMI_ROAM_SET_MBO_PARAM_CMDID, |
| |
| /** offload scan specific commands */ |
| /** set offload scan AP profile */ |
| WMI_OFL_SCAN_ADD_AP_PROFILE = |
| WMI_CMD_GRP_START_ID(WMI_GRP_OFL_SCAN), |
| /** remove offload scan AP profile */ |
| WMI_OFL_SCAN_REMOVE_AP_PROFILE, |
| /** set offload scan period */ |
| WMI_OFL_SCAN_PERIOD, |
| |
| /* P2P specific commands */ |
| /**set P2P device info. FW will used by FW to create P2P IE to be carried in probe response |
| * generated during p2p listen and for p2p discoverability */ |
| WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP_START_ID(WMI_GRP_P2P), |
| /** enable/disable p2p discoverability on STA/AP VDEVs */ |
| WMI_P2P_DEV_SET_DISCOVERABILITY, |
| /** set p2p ie to be carried in beacons generated by FW for GO */ |
| WMI_P2P_GO_SET_BEACON_IE, |
| /** set p2p ie to be carried in probe response frames generated by FW for GO */ |
| WMI_P2P_GO_SET_PROBE_RESP_IE, |
| /** set the vendor specific p2p ie data. FW will use this to parse the P2P NoA |
| * attribute in the beacons/probe responses received. |
| */ |
| WMI_P2P_SET_VENDOR_IE_DATA_CMDID, |
| /** set the configure of p2p find offload */ |
| WMI_P2P_DISC_OFFLOAD_CONFIG_CMDID, |
| /** set the vendor specific p2p ie data for p2p find offload using */ |
| WMI_P2P_DISC_OFFLOAD_APPIE_CMDID, |
| /** set the BSSID/device name pattern of p2p find offload */ |
| WMI_P2P_DISC_OFFLOAD_PATTERN_CMDID, |
| /** set OppPS related parameters **/ |
| WMI_P2P_SET_OPPPS_PARAM_CMDID, |
| |
| /** AP power save specific config */ |
| /** set AP power save specific param */ |
| WMI_AP_PS_PEER_PARAM_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_AP_PS), |
| /** set AP UAPSD coex pecific param */ |
| WMI_AP_PS_PEER_UAPSD_COEX_CMDID, |
| |
| /** set Enhanced Green AP param */ |
| WMI_AP_PS_EGAP_PARAM_CMDID, |
| |
| /** Rate-control specific commands */ |
| WMI_PEER_RATE_RETRY_SCHED_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_RATE_CTRL), |
| |
| /** WLAN Profiling commands. */ |
| WMI_WLAN_PROFILE_TRIGGER_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_PROFILE), |
| WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, |
| WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, |
| WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, |
| WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, |
| |
| /** Suspend resume command Ids */ |
| WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_SUSPEND), |
| WMI_PDEV_RESUME_CMDID, |
| |
| /* Beacon filter commands */ |
| /** add a beacon filter */ |
| WMI_ADD_BCN_FILTER_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_BCN_FILTER), |
| /** remove a beacon filter */ |
| WMI_RMV_BCN_FILTER_CMDID, |
| |
| /* WOW Specific WMI commands */ |
| /** add pattern for awake */ |
| WMI_WOW_ADD_WAKE_PATTERN_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_WOW), |
| /** deleta a wake pattern */ |
| WMI_WOW_DEL_WAKE_PATTERN_CMDID, |
| /** enable/deisable wake event */ |
| WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, |
| /** enable WOW */ |
| WMI_WOW_ENABLE_CMDID, |
| /** host woke up from sleep event to FW. Generated in response to WOW Hardware event */ |
| WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, |
| /* IOAC add keep alive cmd. */ |
| WMI_WOW_IOAC_ADD_KEEPALIVE_CMDID, |
| /* IOAC del keep alive cmd. */ |
| WMI_WOW_IOAC_DEL_KEEPALIVE_CMDID, |
| /* IOAC add pattern for awake */ |
| WMI_WOW_IOAC_ADD_WAKE_PATTERN_CMDID, |
| /* IOAC deleta a wake pattern */ |
| WMI_WOW_IOAC_DEL_WAKE_PATTERN_CMDID, |
| /* D0-WOW enable or disable cmd */ |
| WMI_D0_WOW_ENABLE_DISABLE_CMDID, |
| /* enable extend WoW */ |
| WMI_EXTWOW_ENABLE_CMDID, |
| /* Extend WoW command to configure app type1 parameter */ |
| WMI_EXTWOW_SET_APP_TYPE1_PARAMS_CMDID, |
| /* Extend WoW command to configure app type2 parameter */ |
| WMI_EXTWOW_SET_APP_TYPE2_PARAMS_CMDID, |
| /* enable ICMPv6 Network advertisement filtering */ |
| WMI_WOW_ENABLE_ICMPV6_NA_FLT_CMDID, |
| /* |
| * Set a pattern to match UDP packet in WOW mode. |
| * If match, construct a tx frame in a local buffer |
| * to send through the peer AP to the entity in the |
| * IP network that sent the UDP packet to this STA. |
| */ |
| WMI_WOW_UDP_SVC_OFLD_CMDID, |
| |
| /* configure WOW host wakeup PIN pattern */ |
| WMI_WOW_HOSTWAKEUP_GPIO_PIN_PATTERN_CONFIG_CMDID, |
| |
| /* RTT measurement related cmd */ |
| /** request to make an RTT measurement */ |
| WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_RTT), |
| /** request to report a tsf measurement */ |
| WMI_RTT_TSF_CMDID, |
| |
| /** spectral scan command */ |
| /** configure spectral scan */ |
| WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_SPECTRAL), |
| /** enable/disable spectral scan and trigger */ |
| WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, |
| |
| /* F/W stats */ |
| /** one time request for stats */ |
| WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_STATS), |
| /** Push MCC Adaptive Scheduler Stats to Firmware */ |
| WMI_MCC_SCHED_TRAFFIC_STATS_CMDID, |
| /** one time request for txrx stats */ |
| WMI_REQUEST_STATS_EXT_CMDID, |
| |
| /* Link Layer stats */ |
| /** Request for link layer stats */ |
| WMI_REQUEST_LINK_STATS_CMDID, |
| /** Request for setting params to link layer stats */ |
| WMI_START_LINK_STATS_CMDID, |
| /** Request to clear stats*/ |
| WMI_CLEAR_LINK_STATS_CMDID, |
| |
| /** Request for getting the Firmware Memory Dump */ |
| WMI_GET_FW_MEM_DUMP_CMDID, |
| |
| /** Request to flush of the buffered debug messages */ |
| WMI_DEBUG_MESG_FLUSH_CMDID, |
| |
| /** Cmd to configure the verbose level */ |
| WMI_DIAG_EVENT_LOG_CONFIG_CMDID, |
| |
| /** ARP OFFLOAD REQUEST*/ |
| WMI_SET_ARP_NS_OFFLOAD_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_ARP_NS_OFL), |
| |
| /** Proactive ARP Response Add Pattern Command*/ |
| WMI_ADD_PROACTIVE_ARP_RSP_PATTERN_CMDID, |
| |
| /** Proactive ARP Response Del Pattern Command*/ |
| WMI_DEL_PROACTIVE_ARP_RSP_PATTERN_CMDID, |
| |
| /** NS offload config*/ |
| WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_NLO_OFL), |
| |
| /** APFIND Config */ |
| WMI_APFIND_CMDID, |
| |
| /** Passpoint list config */ |
| WMI_PASSPOINT_LIST_CONFIG_CMDID, |
| |
| /** configure supprssing parameters for MAWC */ |
| WMI_NLO_CONFIGURE_MAWC_CMDID, |
| |
| /* GTK offload Specific WMI commands */ |
| WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_GTK_OFL), |
| |
| /* CSA offload Specific WMI commands */ |
| /** csa offload enable */ |
| WMI_CSA_OFFLOAD_ENABLE_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_CSA_OFL), |
| /** chan switch command */ |
| WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, |
| |
| /* Chatter commands */ |
| /* Change chatter mode of operation */ |
| WMI_CHATTER_SET_MODE_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_CHATTER), |
| /** chatter add coalescing filter command */ |
| WMI_CHATTER_ADD_COALESCING_FILTER_CMDID, |
| /** chatter delete coalescing filter command */ |
| WMI_CHATTER_DELETE_COALESCING_FILTER_CMDID, |
| /** chatter coalecing query command */ |
| WMI_CHATTER_COALESCING_QUERY_CMDID, |
| |
| /**addba specific commands */ |
| /** start the aggregation on this TID */ |
| WMI_PEER_TID_ADDBA_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_TID_ADDBA), |
| /** stop the aggregation on this TID */ |
| WMI_PEER_TID_DELBA_CMDID, |
| |
| /** set station mimo powersave method */ |
| WMI_STA_DTIM_PS_METHOD_CMDID, |
| /** Configure the Station UAPSD AC Auto Trigger Parameters */ |
| WMI_STA_UAPSD_AUTO_TRIG_CMDID, |
| /** Configure the Keep Alive Parameters */ |
| WMI_STA_KEEPALIVE_CMDID, |
| |
| /* Request ssn from target for a sta/tid pair */ |
| WMI_BA_REQ_SSN_CMDID, |
| /* misc command group */ |
| /** echo command mainly used for testing */ |
| WMI_ECHO_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_MISC), |
| |
| /* !!IMPORTANT!! |
| * If you need to add a new WMI command to the WMI_GRP_MISC sub-group, |
| * please make sure you add it BEHIND WMI_PDEV_UTF_CMDID, |
| * as we MUST have a fixed value here to maintain compatibility between |
| * UTF and the ART2 driver |
| */ |
| /** UTF WMI commands */ |
| WMI_PDEV_UTF_CMDID, |
| |
| /** set debug log config */ |
| WMI_DBGLOG_CFG_CMDID, |
| /* QVIT specific command id */ |
| WMI_PDEV_QVIT_CMDID, |
| /* Factory Testing Mode request command |
| * used for integrated chipsets */ |
| WMI_PDEV_FTM_INTG_CMDID, |
| /* set and get keepalive parameters command */ |
| WMI_VDEV_SET_KEEPALIVE_CMDID, |
| WMI_VDEV_GET_KEEPALIVE_CMDID, |
| /* For fw recovery test command */ |
| WMI_FORCE_FW_HANG_CMDID, |
| /* Set Mcast/Bdcast filter */ |
| WMI_SET_MCASTBCAST_FILTER_CMDID, |
| /** set thermal management params **/ |
| WMI_THERMAL_MGMT_CMDID, |
| /** set host auto shutdown params **/ |
| WMI_HOST_AUTO_SHUTDOWN_CFG_CMDID, |
| /** set tpc chainmask config command */ |
| WMI_TPC_CHAINMASK_CONFIG_CMDID, |
| /** set Antenna diversity command */ |
| WMI_SET_ANTENNA_DIVERSITY_CMDID, |
| /** Set OCB Sched Request, deprecated */ |
| WMI_OCB_SET_SCHED_CMDID, |
| /* Set rssi monitoring config command */ |
| WMI_RSSI_BREACH_MONITOR_CONFIG_CMDID, |
| /* Enable/disable Large Receive Offload processing; |
| * provide cfg params */ |
| WMI_LRO_CONFIG_CMDID, |
| /*transfer data from host to firmware to write flash */ |
| WMI_TRANSFER_DATA_TO_FLASH_CMDID, |
| /** Command to enable/disable filtering of multicast IP with unicast mac */ |
| WMI_CONFIG_ENHANCED_MCAST_FILTER_CMDID, |
| /* GPIO Configuration */ |
| WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_GPIO), |
| WMI_GPIO_OUTPUT_CMDID, |
| |
| /* Txbf configuration command */ |
| WMI_TXBF_CMDID, |
| |
| /* FWTEST Commands */ |
| WMI_FWTEST_VDEV_MCC_SET_TBTT_MODE_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_FWTEST), |
| /** set NoA descs **/ |
| WMI_FWTEST_P2P_SET_NOA_PARAM_CMDID, |
| /* UNIT Tests */ |
| WMI_UNIT_TEST_CMDID, |
| /* set debug and tuning parameters */ |
| WMI_FWTEST_CMDID, |
| /* Q-Boost configuration test commands */ |
| WMI_QBOOST_CFG_CMDID, |
| |
| /** TDLS Configuration */ |
| /** enable/disable TDLS */ |
| WMI_TDLS_SET_STATE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_TDLS), |
| /** set tdls peer state */ |
| WMI_TDLS_PEER_UPDATE_CMDID, |
| /** TDLS Offchannel control */ |
| WMI_TDLS_SET_OFFCHAN_MODE_CMDID, |
| |
| /** Resmgr Configuration */ |
| /** Adaptive OCS is enabled by default in the FW. This command is used to |
| * disable FW based adaptive OCS. |
| */ |
| WMI_RESMGR_ADAPTIVE_OCS_ENABLE_DISABLE_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_RESMGR), |
| /** set the requested channel time quota for the home channels */ |
| WMI_RESMGR_SET_CHAN_TIME_QUOTA_CMDID, |
| /** set the requested latency for the home channels */ |
| WMI_RESMGR_SET_CHAN_LATENCY_CMDID, |
| |
| /** STA SMPS Configuration */ |
| /** force SMPS mode */ |
| WMI_STA_SMPS_FORCE_MODE_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_STA_SMPS), |
| /** set SMPS parameters */ |
| WMI_STA_SMPS_PARAM_CMDID, |
| |
| /* Wlan HB commands */ |
| /* enalbe/disable wlan HB */ |
| WMI_HB_SET_ENABLE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_WLAN_HB), |
| /* set tcp parameters for wlan HB */ |
| WMI_HB_SET_TCP_PARAMS_CMDID, |
| /* set tcp pkt filter for wlan HB */ |
| WMI_HB_SET_TCP_PKT_FILTER_CMDID, |
| /* set udp parameters for wlan HB */ |
| WMI_HB_SET_UDP_PARAMS_CMDID, |
| /* set udp pkt filter for wlan HB */ |
| WMI_HB_SET_UDP_PKT_FILTER_CMDID, |
| |
| /** Wlan RMC commands*/ |
| /** enable/disable RMC */ |
| WMI_RMC_SET_MODE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_RMC), |
| /** configure action frame period */ |
| WMI_RMC_SET_ACTION_PERIOD_CMDID, |
| /** For debug/future enhancement purposes only, |
| * configures/finetunes RMC algorithms */ |
| WMI_RMC_CONFIG_CMDID, |
| |
| /** WLAN MHF offload commands */ |
| /** enable/disable MHF offload */ |
| WMI_MHF_OFFLOAD_SET_MODE_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_MHF_OFL), |
| /** Plumb routing table for MHF offload */ |
| WMI_MHF_OFFLOAD_PLUMB_ROUTING_TBL_CMDID, |
| |
| /*location scan commands */ |
| /*start batch scan */ |
| WMI_BATCH_SCAN_ENABLE_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_LOCATION_SCAN), |
| /*stop batch scan */ |
| WMI_BATCH_SCAN_DISABLE_CMDID, |
| /*get batch scan result */ |
| WMI_BATCH_SCAN_TRIGGER_RESULT_CMDID, |
| /* OEM related cmd */ |
| WMI_OEM_REQ_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_OEM), |
| WMI_OEM_REQUEST_CMDID, /* UNUSED */ |
| |
| /** Nan Request */ |
| WMI_NAN_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_NAN), |
| |
| /** Modem power state command */ |
| WMI_MODEM_POWER_STATE_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_COEX), |
| WMI_CHAN_AVOID_UPDATE_CMDID, |
| WMI_COEX_CONFIG_CMDID, |
| |
| /** |
| * OBSS scan offload enable/disable commands |
| * OBSS scan enable CMD will send to FW after VDEV UP, if these conditions are true: |
| * 1. WMI_SERVICE_OBSS_SCAN is reported by FW in service ready, |
| * 2. STA connect to a 2.4Ghz ht20/ht40 AP, |
| * 3. AP enable 20/40 coexistence (OBSS_IE-74 can be found in beacon or association response) |
| * If OBSS parameters from beacon changed, also use enable CMD to update parameters. |
| * OBSS scan disable CMD will send to FW if have enabled when tearing down connection. |
| */ |
| WMI_OBSS_SCAN_ENABLE_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_OBSS_OFL), |
| WMI_OBSS_SCAN_DISABLE_CMDID, |
| |
| /**LPI commands*/ |
| /**LPI mgmt snooping config command*/ |
| WMI_LPI_MGMT_SNOOPING_CONFIG_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_LPI), |
| /**LPI scan start command*/ |
| WMI_LPI_START_SCAN_CMDID, |
| /**LPI scan stop command*/ |
| WMI_LPI_STOP_SCAN_CMDID, |
| |
| /** ExtScan commands */ |
| WMI_EXTSCAN_START_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_EXTSCAN), |
| WMI_EXTSCAN_STOP_CMDID, |
| WMI_EXTSCAN_CONFIGURE_WLAN_CHANGE_MONITOR_CMDID, |
| WMI_EXTSCAN_CONFIGURE_HOTLIST_MONITOR_CMDID, |
| WMI_EXTSCAN_GET_CACHED_RESULTS_CMDID, |
| WMI_EXTSCAN_GET_WLAN_CHANGE_RESULTS_CMDID, |
| WMI_EXTSCAN_SET_CAPABILITIES_CMDID, |
| WMI_EXTSCAN_GET_CAPABILITIES_CMDID, |
| WMI_EXTSCAN_CONFIGURE_HOTLIST_SSID_MONITOR_CMDID, |
| WMI_EXTSCAN_CONFIGURE_MAWC_CMDID, |
| |
| /** DHCP server offload commands */ |
| WMI_SET_DHCP_SERVER_OFFLOAD_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_DHCP_OFL), |
| |
| /** IPA Offload features related commands */ |
| WMI_IPA_OFFLOAD_ENABLE_DISABLE_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_IPA), |
| |
| /** mDNS responder offload commands */ |
| WMI_MDNS_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_MDNS_OFL), |
| WMI_MDNS_SET_FQDN_CMDID, |
| WMI_MDNS_SET_RESPONSE_CMDID, |
| WMI_MDNS_GET_STATS_CMDID, |
| |
| /* enable/disable AP Authentication offload */ |
| WMI_SAP_OFL_ENABLE_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_SAP_OFL), |
| WMI_SAP_SET_BLACKLIST_PARAM_CMDID, |
| |
| /** Out-of-context-of-BSS (OCB) commands */ |
| WMI_OCB_SET_CONFIG_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_OCB), |
| WMI_OCB_SET_UTC_TIME_CMDID, |
| WMI_OCB_START_TIMING_ADVERT_CMDID, |
| WMI_OCB_STOP_TIMING_ADVERT_CMDID, |
| WMI_OCB_GET_TSF_TIMER_CMDID, |
| WMI_DCC_GET_STATS_CMDID, |
| WMI_DCC_CLEAR_STATS_CMDID, |
| WMI_DCC_UPDATE_NDL_CMDID, |
| /* System-On-Chip commands */ |
| WMI_SOC_SET_PCL_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_SOC), |
| WMI_SOC_SET_HW_MODE_CMDID, |
| WMI_SOC_SET_DUAL_MAC_CONFIG_CMDID, |
| WMI_SOC_SET_ANTENNA_MODE_CMDID, |
| |
| /* packet filter commands */ |
| WMI_PACKET_FILTER_CONFIG_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_PKT_FILTER), |
| WMI_PACKET_FILTER_ENABLE_CMDID, |
| /** Motion Aided WiFi Connectivity (MAWC) commands */ |
| WMI_MAWC_SENSOR_REPORT_IND_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_MAWC), |
| |
| /** WMI commands related to PMF 11w Offload */ |
| WMI_PMF_OFFLOAD_SET_SA_QUERY_CMDID = |
| WMI_CMD_GRP_START_ID(WMI_GRP_PMF_OFFLOAD), |
| |
| /** WMI commands related to pkt filter (BPF) offload */ |
| WMI_BPF_GET_CAPABILITY_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_BPF_OFFLOAD), |
| WMI_BPF_GET_VDEV_STATS_CMDID, |
| WMI_BPF_SET_VDEV_INSTRUCTIONS_CMDID, |
| WMI_BPF_DEL_VDEV_INSTRUCTIONS_CMDID, |
| /** |
| * Nan Data commands |
| * NDI - NAN Data Interface |
| * NDP - NAN Data Path |
| */ |
| WMI_NDI_GET_CAP_REQ_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_NAN_DATA), |
| WMI_NDP_INITIATOR_REQ_CMDID, |
| WMI_NDP_RESPONDER_REQ_CMDID, |
| WMI_NDP_END_REQ_CMDID, |
| } WMI_CMD_ID; |
| |
| typedef enum { |
| /** WMI service is ready; after this event WMI messages can be sent/received */ |
| WMI_SERVICE_READY_EVENTID = 0x1, |
| /** WMI is ready; after this event the wlan subsystem is initialized and can process commands. */ |
| WMI_READY_EVENTID, |
| |
| /** Scan specific events */ |
| WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), |
| |
| /* PDEV specific events */ |
| /** TPC config for the current operating channel */ |
| WMI_PDEV_TPC_CONFIG_EVENTID = |
| WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), |
| /** Channel stats event */ |
| WMI_CHAN_INFO_EVENTID, |
| |
| /** PHY Error specific WMI event */ |
| WMI_PHYERR_EVENTID, |
| |
| /** eeprom dump event */ |
| WMI_PDEV_DUMP_EVENTID, |
| |
| /** traffic pause event */ |
| WMI_TX_PAUSE_EVENTID, |
| |
| /** DFS radar event */ |
| WMI_DFS_RADAR_EVENTID, |
| |
| /** track L1SS entry and residency event */ |
| WMI_PDEV_L1SS_TRACK_EVENTID, |
| |
| /** Report current temprature of the chip in Celcius degree */ |
| WMI_PDEV_TEMPERATURE_EVENTID, |
| |
| /* Extension of WMI_SERVICE_READY msg with |
| * extra target capability info |
| */ |
| WMI_SERVICE_READY_EXT_EVENTID, |
| |
| /** FIPS test mode event */ |
| WMI_PDEV_FIPS_EVENTID, |
| |
| /** Channel hopping avoidance */ |
| WMI_PDEV_CHANNEL_HOPPING_EVENTID, |
| |
| /** CCK ANI level event */ |
| WMI_PDEV_ANI_CCK_LEVEL_EVENTID, |
| |
| /** OFDM ANI level event */ |
| WMI_PDEV_ANI_OFDM_LEVEL_EVENTID, |
| |
| /** Tx PPDU params */ |
| WMI_PDEV_TPC_EVENTID, |
| |
| /** NF Cal Power in DBR/DBM for all channels */ |
| WMI_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID, |
| |
| /** SOC/PDEV events */ |
| WMI_PDEV_SET_HW_MODE_RESP_EVENTID, |
| WMI_PDEV_HW_MODE_TRANSITION_EVENTID, |
| WMI_PDEV_SET_MAC_CONFIG_RESP_EVENTID, |
| |
| /* VDEV specific events */ |
| /** VDEV started event in response to VDEV_START request */ |
| WMI_VDEV_START_RESP_EVENTID = |
| WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), |
| /** vdev stopped event , generated in response to VDEV_STOP request */ |
| WMI_VDEV_STOPPED_EVENTID, |
| /* Indicate the set key (used for setting per |
| * peer unicast and per vdev multicast) |
| * operation has completed */ |
| WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, |
| /* NOTE: WMI_VDEV_MCC_BCN_INTERVAL_CHANGE_REQ_EVENTID would be deprecated. Please |
| don't use this for any new implementations */ |
| /* Firmware requests dynamic change to a specific beacon interval for a specific vdev ID in MCC scenario. |
| This request is valid only for vdevs operating in soft AP or P2P GO mode */ |
| WMI_VDEV_MCC_BCN_INTERVAL_CHANGE_REQ_EVENTID, |
| |
| /* Return the TSF timestamp of specified vdev */ |
| WMI_VDEV_TSF_REPORT_EVENTID, |
| |
| /* FW response to Host for vdev delete cmdid */ |
| WMI_VDEV_DELETE_RESP_EVENTID, |
| |
| /* peer specific events */ |
| /** FW reauet to kick out the station for reasons like inactivity,lack of response ..etc */ |
| WMI_PEER_STA_KICKOUT_EVENTID = |
| WMI_EVT_GRP_START_ID(WMI_GRP_PEER), |
| |
| /** Peer Info Event with data_rate, rssi, tx_fail_cnt etc */ |
| WMI_PEER_INFO_EVENTID, |
| |
| /** Event indicating that TX fail count reaching threshold */ |
| WMI_PEER_TX_FAIL_CNT_THR_EVENTID, |
| /** Return the estimate link speed for the Peer specified in the |
| * WMI_PEER_GET_ESTIMATED_LINKSPEED_CMDID command. |
| */ |
| WMI_PEER_ESTIMATED_LINKSPEED_EVENTID, |
| /* Return the peer state |
| * WMI_PEER_SET_PARAM_CMDID, WMI_PEER_AUTHORIZE |
| */ |
| WMI_PEER_STATE_EVENTID, |
| |
| /* Peer Assoc Conf event to confirm fw had received PEER_ASSOC_CMD. |
| * After that, host will send Mx message. |
| * Otherwise, host will pause any Mx(STA:M2/M4) message |
| */ |
| WMI_PEER_ASSOC_CONF_EVENTID, |
| |
| /* FW response to Host for peer delete cmdid */ |
| WMI_PEER_DELETE_RESP_EVENTID, |
| |
| /** Valid rate code list for peer */ |
| WMI_PEER_RATECODE_LIST_EVENTID, |
| WMI_WDS_PEER_EVENTID, |
| WMI_PEER_STA_PS_STATECHG_EVENTID, |
| |
| /* beacon/mgmt specific events */ |
| /** RX management frame. the entire frame is carried along with the event. */ |
| WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), |
| /** software beacon alert event to Host requesting host to Queue a beacon for transmission |
| use only in host beacon mode */ |
| WMI_HOST_SWBA_EVENTID, |
| /** beacon tbtt offset event indicating the tsf offset of the tbtt from the theritical value. |
| tbtt offset is normally 0 and will be non zero if there are multiple VDEVs operating in |
| staggered beacon transmission mode */ |
| WMI_TBTTOFFSET_UPDATE_EVENTID, |
| |
| /** event after the first beacon is transmitted following |
| a change in the template.*/ |
| WMI_OFFLOAD_BCN_TX_STATUS_EVENTID, |
| /** event after the first probe response is transmitted following |
| a change in the template.*/ |
| WMI_OFFLOAD_PROB_RESP_TX_STATUS_EVENTID, |
| /** Event for Mgmt TX completion event */ |
| WMI_MGMT_TX_COMPLETION_EVENTID, |
| |
| /*ADDBA Related WMI Events */ |
| /** Indication the completion of the prior |
| WMI_PEER_TID_DELBA_CMDID(initiator) */ |
| WMI_TX_DELBA_COMPLETE_EVENTID = |
| WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), |
| /** Indication the completion of the prior |
| *WMI_PEER_TID_ADDBA_CMDID(initiator) */ |
| WMI_TX_ADDBA_COMPLETE_EVENTID, |
| |
| /* Seq num returned from hw for a sta/tid pair */ |
| WMI_BA_RSP_SSN_EVENTID, |
| |
| /* Aggregation state requested by BTC */ |
| WMI_AGGR_STATE_TRIG_EVENTID, |
| |
| /** Roam event to trigger roaming on host */ |
| WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), |
| |
| /** matching AP found from list of profiles */ |
| WMI_PROFILE_MATCH, |
| /** roam synch event */ |
| WMI_ROAM_SYNCH_EVENTID, |
| |
| /** P2P disc found */ |
| WMI_P2P_DISC_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_P2P), |
| |
| /*send noa info to host when noa is changed for beacon tx offload enable */ |
| WMI_P2P_NOA_EVENTID, |
| |
| /** Send EGAP Info to host */ |
| WMI_AP_PS_EGAP_INFO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_AP_PS), |
| |
| /* send pdev resume event to host after pdev resume. */ |
| WMI_PDEV_RESUME_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SUSPEND), |
| |
| /** WOW wake up host event.generated in response to WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID. |
| will cary wake reason */ |
| WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), |
| WMI_D0_WOW_DISABLE_ACK_EVENTID, |
| WMI_WOW_INITIAL_WAKEUP_EVENTID, |
| |
| /*RTT related event ID */ |
| /** RTT measurement report */ |
| WMI_RTT_MEASUREMENT_REPORT_EVENTID = |
| WMI_EVT_GRP_START_ID(WMI_GRP_RTT), |
| /** TSF measurement report */ |
| WMI_TSF_MEASUREMENT_REPORT_EVENTID, |
| /** RTT error report */ |
| WMI_RTT_ERROR_REPORT_EVENTID, |
| /*STATS specific events */ |
| /** txrx stats event requested by host */ |
| WMI_STATS_EXT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_STATS), |
| /** FW iface link stats Event */ |
| WMI_IFACE_LINK_STATS_EVENTID, |
| /** FW iface peer link stats Event */ |
| WMI_PEER_LINK_STATS_EVENTID, |
| /** FW Update radio stats Event */ |
| WMI_RADIO_LINK_STATS_EVENTID, |
| /** Firmware memory dump Complete event*/ |
| WMI_UPDATE_FW_MEM_DUMP_EVENTID, |
| |
| /** Event indicating the DIAG logs/events supported by FW */ |
| WMI_DIAG_EVENT_LOG_SUPPORTED_EVENTID, |
| |
| /* Instantaneous RSSI event */ |
| WMI_INST_RSSI_STATS_EVENTID, |
| |
| /** NLO specific events */ |
| /** NLO match event after the first match */ |
| WMI_NLO_MATCH_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_NLO_OFL), |
| |
| /** NLO scan complete event */ |
| WMI_NLO_SCAN_COMPLETE_EVENTID, |
| |
| /** APFIND specific events */ |
| WMI_APFIND_EVENTID, |
| |
| /** passpoint network match event */ |
| WMI_PASSPOINT_MATCH_EVENTID, |
| |
| /** GTK offload stautus event requested by host */ |
| WMI_GTK_OFFLOAD_STATUS_EVENTID = |
| WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), |
| |
| /** GTK offload failed to rekey event */ |
| WMI_GTK_REKEY_FAIL_EVENTID, |
| /* CSA IE received event */ |
| WMI_CSA_HANDLING_EVENTID = |
| WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), |
| |
| /*chatter query reply event */ |
| WMI_CHATTER_PC_QUERY_EVENTID = |
| WMI_EVT_GRP_START_ID(WMI_GRP_CHATTER), |
| |
| /** echo event in response to echo command */ |
| WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), |
| |
| /* !!IMPORTANT!! |
| * If you need to add a new WMI event ID to the WMI_GRP_MISC sub-group, |
| * please make sure you add it BEHIND WMI_PDEV_UTF_EVENTID, |
| * as we MUST have a fixed value here to maintain compatibility between |
| * UTF and the ART2 driver |
| */ |
| /** UTF specific WMI event */ |
| WMI_PDEV_UTF_EVENTID, |
| |
| /** event carries buffered debug messages */ |
| WMI_DEBUG_MESG_EVENTID, |
| /** FW stats(periodic or on shot) */ |
| WMI_UPDATE_STATS_EVENTID, |
| /** debug print message used for tracing FW code while debugging */ |
| WMI_DEBUG_PRINT_EVENTID, |
| /** DCS wlan or non-wlan interference event |
| */ |
| WMI_DCS_INTERFERENCE_EVENTID, |
| /** VI spoecific event */ |
| WMI_PDEV_QVIT_EVENTID, |
| /** FW code profile data in response to profile request */ |
| WMI_WLAN_PROFILE_DATA_EVENTID, |
| /* Factory Testing Mode request event |
| * used for integrated chipsets */ |
| WMI_PDEV_FTM_INTG_EVENTID, |
| /* avoid list of frequencies . |
| */ |
| WMI_WLAN_FREQ_AVOID_EVENTID, |
| /* Indicate the keepalive parameters */ |
| WMI_VDEV_GET_KEEPALIVE_EVENTID, |
| /* Thermal Management event */ |
| WMI_THERMAL_MGMT_EVENTID, |
| |
| /* Container for QXDM/DIAG events */ |
| WMI_DIAG_DATA_CONTAINER_EVENTID, |
| |
| /* host auto shutdown event */ |
| WMI_HOST_AUTO_SHUTDOWN_EVENTID, |
| |
| /*update mib counters together with WMI_UPDATE_STATS_EVENTID */ |
| WMI_UPDATE_WHAL_MIB_STATS_EVENTID, |
| |
| /*update ht/vht info based on vdev (rx and tx NSS and preamble) */ |
| WMI_UPDATE_VDEV_RATE_STATS_EVENTID, |
| |
| WMI_DIAG_EVENTID, |
| |
| /** Set OCB Sched Response, deprecated */ |
| WMI_OCB_SET_SCHED_EVENTID, |
| |
| /* event to indicate the flush of the buffered debug messages is complete*/ |
| WMI_DEBUG_MESG_FLUSH_COMPLETE_EVENTID, |
| /* event to report mix/max RSSI breach events */ |
| WMI_RSSI_BREACH_EVENTID, |
| /* event to report completion of data storage into flash memory */ |
| WMI_TRANSFER_DATA_TO_FLASH_COMPLETE_EVENTID, |
| |
| /** event to report SCPC calibrated data to host */ |
| WMI_PDEV_UTF_SCPC_EVENTID, |
| |
| /* GPIO Event */ |
| WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), |
| /** upload H_CV info WMI event |
| * to indicate uploaded H_CV info to host |
| */ |
| WMI_UPLOADH_EVENTID, |
| |
| /** capture H info WMI event |
| * to indicate captured H info to host |
| */ |
| WMI_CAPTUREH_EVENTID, |
| /* hw RFkill */ |
| WMI_RFKILL_STATE_CHANGE_EVENTID, |
| |
| /* TDLS Event */ |
| WMI_TDLS_PEER_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_TDLS), |
| |
| /* STA SMPS Event */ |
| /* force SMPS mode */ |
| WMI_STA_SMPS_FORCE_MODE_COMPLETE_EVENTID = |
| WMI_EVT_GRP_START_ID(WMI_GRP_STA_SMPS), |
| |
| /*location scan event */ |
| /*report the firmware's capability of batch scan */ |
| WMI_BATCH_SCAN_ENABLED_EVENTID = |
| WMI_EVT_GRP_START_ID(WMI_GRP_LOCATION_SCAN), |
| /*batch scan result */ |
| WMI_BATCH_SCAN_RESULT_EVENTID, |
| /* OEM Event */ |
| WMI_OEM_CAPABILITY_EVENTID = /* DEPRECATED */ |
| WMI_EVT_GRP_START_ID(WMI_GRP_OEM), |
| WMI_OEM_MEASUREMENT_REPORT_EVENTID, /* DEPRECATED */ |
| WMI_OEM_ERROR_REPORT_EVENTID, /* DEPRECATED */ |
| WMI_OEM_RESPONSE_EVENTID, |
| |
| /* NAN Event */ |
| WMI_NAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_NAN), |
| WMI_NAN_DISC_IFACE_CREATED_EVENTID, |
| WMI_NAN_DISC_IFACE_DELETED_EVENTID, |
| WMI_NAN_STARTED_CLUSTER_EVENTID, |
| WMI_NAN_JOINED_CLUSTER_EVENTID, |
| |
| /* LPI Event */ |
| WMI_LPI_RESULT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_LPI), |
| WMI_LPI_STATUS_EVENTID, |
| WMI_LPI_HANDOFF_EVENTID, |
| |
| /* ExtScan events */ |
| WMI_EXTSCAN_START_STOP_EVENTID = |
| WMI_EVT_GRP_START_ID(WMI_GRP_EXTSCAN), |
| WMI_EXTSCAN_OPERATION_EVENTID, |
| WMI_EXTSCAN_TABLE_USAGE_EVENTID, |
| WMI_EXTSCAN_CACHED_RESULTS_EVENTID, |
| WMI_EXTSCAN_WLAN_CHANGE_RESULTS_EVENTID, |
| WMI_EXTSCAN_HOTLIST_MATCH_EVENTID, |
| WMI_EXTSCAN_CAPABILITIES_EVENTID, |
| WMI_EXTSCAN_HOTLIST_SSID_MATCH_EVENTID, |
| |
| /* mDNS offload events */ |
| WMI_MDNS_STATS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MDNS_OFL), |
| |
| /* SAP Authentication offload events */ |
| WMI_SAP_OFL_ADD_STA_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SAP_OFL), |
| WMI_SAP_OFL_DEL_STA_EVENTID, |
| |
| /** Out-of-context-of-bss (OCB) events */ |
| WMI_OCB_SET_CONFIG_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_OCB), |
| WMI_OCB_GET_TSF_TIMER_RESP_EVENTID, |
| WMI_DCC_GET_STATS_RESP_EVENTID, |
| WMI_DCC_UPDATE_NDL_RESP_EVENTID, |
| WMI_DCC_STATS_EVENTID, |
| /* System-On-Chip events */ |
| WMI_SOC_SET_HW_MODE_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SOC), |
| WMI_SOC_HW_MODE_TRANSITION_EVENTID, |
| WMI_SOC_SET_DUAL_MAC_CONFIG_RESP_EVENTID, |
| /** Motion Aided WiFi Connectivity (MAWC) events */ |
| WMI_MAWC_ENABLE_SENSOR_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MAWC), |
| |
| /** pkt filter (BPF) offload relevant events */ |
| WMI_BPF_CAPABILIY_INFO_EVENTID = |
| WMI_EVT_GRP_START_ID(WMI_GRP_BPF_OFFLOAD), |
| WMI_BPF_VDEV_STATS_INFO_EVENTID, |
| |
| /** NAN Data Events */ |
| WMI_NDI_CAP_RSP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_NAN_DATA), |
| WMI_NDP_INITIATOR_RSP_EVENTID, |
| WMI_NDP_RESPONDER_RSP_EVENTID, |
| WMI_NDP_END_RSP_EVENTID, |
| WMI_NDP_INDICATION_EVENTID, |
| WMI_NDP_CONFIRM_EVENTID, |
| WMI_NDP_END_INDICATION_EVENTID, |
| } WMI_EVT_ID; |
| |
| /* defines for OEM message sub-types */ |
| #define WMI_OEM_CAPABILITY_REQ 0x01 |
| #define WMI_OEM_CAPABILITY_RSP 0x02 |
| #define WMI_OEM_MEASUREMENT_REQ 0x03 |
| #define WMI_OEM_MEASUREMENT_RSP 0x04 |
| #define WMI_OEM_ERROR_REPORT_RSP 0x05 |
| #define WMI_OEM_NAN_MEAS_REQ 0x06 |
| #define WMI_OEM_NAN_MEAS_RSP 0x07 |
| #define WMI_OEM_NAN_PEER_INFO 0x08 |
| #define WMI_OEM_CONFIGURE_LCR 0x09 |
| #define WMI_OEM_CONFIGURE_LCI 0x0A |
| |
| /* below message subtype is internal to CLD. Target should |
| * never use internal response type |
| */ |
| #define WMI_OEM_INTERNAL_RSP 0xdeadbeef |
| |
| #define WMI_CHAN_LIST_TAG 0x1 |
| #define WMI_SSID_LIST_TAG 0x2 |
| #define WMI_BSSID_LIST_TAG 0x3 |
| #define WMI_IE_TAG 0x4 |
| #define WMI_NDP_CFG_TAG 0x5 |
| #define WMI_NDP_QOS_CFG_TAG 0x6 |
| #define WMI_NDP_APP_INFO_TAG 0x7 |
| #define WMI_NDP_END_REQ_LIST_TAG 0x8 |
| #define WMI_NDP_END_RSP_PER_NDI_LIST_TAG 0x9 |
| #define WMI_NDP_END_INDICATION_LIST_TAG 0xA |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_channel */ |
| /** primary 20 MHz channel frequency in mhz */ |
| A_UINT32 mhz; |
| /** Center frequency 1 in MHz*/ |
| A_UINT32 band_center_freq1; |
| /** Center frequency 2 in MHz - valid only for 11acvht 80plus80 mode*/ |
| A_UINT32 band_center_freq2; |
| /** channel info described below */ |
| A_UINT32 info; |
| /** contains min power, max power, reg power and reg class id. */ |
| A_UINT32 reg_info_1; |
| /** contains antennamax */ |
| A_UINT32 reg_info_2; |
| } wmi_channel; |
| |
| typedef enum { |
| WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, |
| WMI_CHANNEL_CHANGE_CAUSE_CSA, |
| } wmi_channel_change_cause; |
| |
| /** channel info consists of 6 bits of channel mode */ |
| |
| #define WMI_SET_CHANNEL_MODE(pwmi_channel, val) do { \ |
| (pwmi_channel)->info &= 0xffffffc0; \ |
| (pwmi_channel)->info |= (val); \ |
| } while (0) |
| |
| #define WMI_GET_CHANNEL_MODE(pwmi_channel) ((pwmi_channel)->info & 0x0000003f) |
| |
| #define WMI_CHAN_FLAG_HT40_PLUS 6 |
| #define WMI_CHAN_FLAG_PASSIVE 7 |
| #define WMI_CHAN_ADHOC_ALLOWED 8 |
| #define WMI_CHAN_AP_DISABLED 9 |
| #define WMI_CHAN_FLAG_DFS 10 |
| #define WMI_CHAN_FLAG_ALLOW_HT 11 /* HT is allowed on this channel */ |
| #define WMI_CHAN_FLAG_ALLOW_VHT 12 /* VHT is allowed on this channel */ |
| #define WMI_CHANNEL_CHANGE_CAUSE_CSA 13 /*Indicate reason for channel switch */ |
| #define WMI_CHAN_FLAG_HALF_RATE 14 /* Indicates half rate channel */ |
| #define WMI_CHAN_FLAG_QUARTER_RATE 15 /* Indicates quarter rate channel */ |
| /* Enable radar event reporting for sec80 in VHT80p80 */ |
| #define WMI_CHAN_FLAG_DFS_CFREQ2 16 |
| |
| #define WMI_SET_CHANNEL_FLAG(pwmi_channel, flag) do { \ |
| (pwmi_channel)->info |= (1 << flag); \ |
| } while (0) |
| |
| #define WMI_GET_CHANNEL_FLAG(pwmi_channel, flag) \ |
| (((pwmi_channel)->info & (1 << flag)) >> flag) |
| |
| #define WMI_SET_CHANNEL_MIN_POWER(pwmi_channel, val) do { \ |
| (pwmi_channel)->reg_info_1 &= 0xffffff00; \ |
| (pwmi_channel)->reg_info_1 |= (val&0xff); \ |
| } while (0) |
| #define WMI_GET_CHANNEL_MIN_POWER(pwmi_channel) ((pwmi_channel)->reg_info_1 & 0xff) |
| |
| #define WMI_SET_CHANNEL_MAX_POWER(pwmi_channel, val) do { \ |
| (pwmi_channel)->reg_info_1 &= 0xffff00ff; \ |
| (pwmi_channel)->reg_info_1 |= ((val&0xff) << 8); \ |
| } while (0) |
| #define WMI_GET_CHANNEL_MAX_POWER(pwmi_channel) ((((pwmi_channel)->reg_info_1) >> 8) & 0xff) |
| |
| #define WMI_SET_CHANNEL_REG_POWER(pwmi_channel, val) do { \ |
| (pwmi_channel)->reg_info_1 &= 0xff00ffff; \ |
| (pwmi_channel)->reg_info_1 |= ((val&0xff) << 16); \ |
| } while (0) |
| #define WMI_GET_CHANNEL_REG_POWER(pwmi_channel) ((((pwmi_channel)->reg_info_1) >> 16) & 0xff) |
| #define WMI_SET_CHANNEL_REG_CLASSID(pwmi_channel, val) do { \ |
| (pwmi_channel)->reg_info_1 &= 0x00ffffff; \ |
| (pwmi_channel)->reg_info_1 |= ((val&0xff) << 24); \ |
| } while (0) |
| #define WMI_GET_CHANNEL_REG_CLASSID(pwmi_channel) ((((pwmi_channel)->reg_info_1) >> 24) & 0xff) |
| |
| #define WMI_SET_CHANNEL_ANTENNA_MAX(pwmi_channel, val) do { \ |
| (pwmi_channel)->reg_info_2 &= 0xffffff00; \ |
| (pwmi_channel)->reg_info_2 |= (val&0xff); \ |
| } while (0) |
| #define WMI_GET_CHANNEL_ANTENNA_MAX(pwmi_channel) ((pwmi_channel)->reg_info_2 & 0xff) |
| |
| /* max tx power is in 1 dBm units */ |
| #define WMI_SET_CHANNEL_MAX_TX_POWER(pwmi_channel, val) do { \ |
| (pwmi_channel)->reg_info_2 &= 0xffff00ff; \ |
| (pwmi_channel)->reg_info_2 |= ((val&0xff)<<8); \ |
| } while (0) |
| #define WMI_GET_CHANNEL_MAX_TX_POWER(pwmi_channel) ((((pwmi_channel)->reg_info_2)>>8) & 0xff) |
| |
| |
| /** HT Capabilities*/ |
| #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ |
| #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ |
| #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ |
| #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ |
| #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 |
| #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ |
| #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 |
| #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ |
| #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ |
| #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ |
| #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 |
| #define WMI_HT_CAP_HT40_SGI 0x0800 |
| |
| /* These macros should be used when we wish to advertise STBC support for |
| * only 1SS or 2SS or 3SS. */ |
| #define WMI_HT_CAP_RX_STBC_1SS 0x0010 /* B4-B5 RX STBC */ |
| #define WMI_HT_CAP_RX_STBC_2SS 0x0020 /* B4-B5 RX STBC */ |
| #define WMI_HT_CAP_RX_STBC_3SS 0x0030 /* B4-B5 RX STBC */ |
| |
| #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ |
| WMI_HT_CAP_HT20_SGI | \ |
| WMI_HT_CAP_HT40_SGI | \ |
| WMI_HT_CAP_TX_STBC | \ |
| WMI_HT_CAP_RX_STBC | \ |
| WMI_HT_CAP_LDPC) |
| |
| /* WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information |
| field. The fields not defined here are not supported, or reserved. |
| Do not change these masks and if you have to add new one follow the |
| bitmask as specified by 802.11ac draft. |
| */ |
| |
| #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 |
| #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 |
| #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 |
| #define WMI_VHT_CAP_CH_WIDTH_160MHZ 0x00000004 |
| #define WMI_VHT_CAP_CH_WIDTH_80P80_160MHZ 0x00000008 |
| #define WMI_VHT_CAP_RX_LDPC 0x00000010 |
| #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 |
| #define WMI_VHT_CAP_SGI_160MHZ 0x00000040 |
| #define WMI_VHT_CAP_TX_STBC 0x00000080 |
| #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 |
| #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 |
| #define WMI_VHT_CAP_SU_BFORMER 0x00000800 |
| #define WMI_VHT_CAP_SU_BFORMEE 0x00001000 |
| #define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000 |
| #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13 |
| #define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000 |
| #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16 |
| #define WMI_VHT_CAP_MU_BFORMER 0x00080000 |
| #define WMI_VHT_CAP_MU_BFORMEE 0x00100000 |
| #define WMI_VHT_CAP_TXOP_PS 0x00200000 |
| #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 |
| #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 |
| #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 |
| #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 |
| |
| /* TEMPORARY: |
| * Preserve the incorrect old name as an alias for the correct new name |
| * until all references to the old name have been removed from all hosts |
| * and targets. |
| */ |
| #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIT WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT |
| |
| /* These macros should be used when we wish to advertise STBC support for |
| * only 1SS or 2SS or 3SS. */ |
| #define WMI_VHT_CAP_RX_STBC_1SS 0x00000100 |
| #define WMI_VHT_CAP_RX_STBC_2SS 0x00000200 |
| #define WMI_VHT_CAP_RX_STBC_3SS 0x00000300 |
| |
| /* TEMPORARY: |
| * Preserve the incorrect old name as an alias for the correct new name |
| * until all references to the old name have been removed from all hosts |
| * and targets. |
| */ |
| #define WMI_vHT_CAP_RX_STBC_3SS WMI_VHT_CAP_RX_STBC_3SS |
| |
| #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ |
| WMI_VHT_CAP_SGI_80MHZ | \ |
| WMI_VHT_CAP_TX_STBC | \ |
| WMI_VHT_CAP_RX_STBC_MASK | \ |
| WMI_VHT_CAP_RX_LDPC | \ |
| WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ |
| WMI_VHT_CAP_RX_FIXED_ANT | \ |
| WMI_VHT_CAP_TX_FIXED_ANT) |
| |
| /* Interested readers refer to Rx/Tx MCS Map definition as defined in |
| 802.11ac |
| */ |
| #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) |
| #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 |
| #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 |
| |
| /** 11ax capabilities */ |
| #define WMI_HE_CAP_PPE_PRESENT 0x00000001 |
| #define WMI_HE_CAP_TWT_RESPONDER_SUPPORT 0x00000002 |
| #define WMI_HE_CAP_TWT_REQUESTER_SUPPORT 0x00000004 |
| #define WMI_HE_FRAG_SUPPORT_MASK 0x00000018 |
| #define WMI_HE_FRAG_SUPPORT_SHIFT 3 |
| /** NOTE: This defs cannot be changed in the future without |
| * breaking WMI compatibility |
| */ |
| #define WMI_MAX_NUM_SS 8 |
| #define WMI_MAX_NUM_RU 4 |
| |
| /* |
| * Figure 8 554ae: -PPE Threshold Info field format |
| * we pack PPET16 and PPT8 for four RU's in one element of array. |
| * |
| * ppet16_ppet8_ru3_ru0 array element 0 holds: |
| * | PPET16 | PPET8 | PPET16 | PPET8 | PPET16 | PPET8 | PPET16 | PPET8 | |
| *rsvd |NSS1,RU4|NSS1,RU4|NSS1,RU3|NSS1,RU3|NSS1,RU2|NSS1,RU2|NSS1,RU1|NSS1,RU1| |
| *31:23| 22:20 | 19:17 | 17:15 | 14:12 | 11:9 | 8:6 | 5:3 | 2:0 | |
| * |
| * ppet16_ppet8_ru3_ru0 array element 1 holds: |
| * | PPET16 | PPET8 | PPET16 | PPET8 | PPET16 | PPET8 | PPET16 | PPET8 | |
| *rsvd |NSS2,RU4|NSS2,RU4|NSS2,RU3|NSS2,RU3|NSS2,RU2|NSS2,RU2|NSS2,RU1|NSS2,RU1| |
| *31:23| 22:20 | 19:17 | 17:15 | 14:12 | 11:9 | 8:6 | 5:3 | 2:0 | |
| * |
| * etc. |
| */ |
| |
| /* |
| * Note that in these macros, "ru" is one-based, not zero-based, while |
| * nssm1 is zero-based. |
| */ |
| #define WMI_SET_PPET8(ppet16_ppet8_ru3_ru0, ppet, ru, nssm1) \ |
| do { \ |
| ppet16_ppet8_ru3_ru0[nssm1] &= ~(7 << (((ru-1)%4)*6)); \ |
| ppet16_ppet8_ru3_ru0[nssm1] |= ((ppet&7) << (((ru-1)%4)*6)); \ |
| } while (0) |
| |
| #define WMI_GET_PPET8(ppet16_ppet8_ru3_ru0, ru, nssm1) \ |
| ((ppet16_ppet8_ru3_ru0[nssm1] >> (((ru-1)%4)*6))&7) |
| |
| #define WMI_SET_PPET16(ppet16_ppet8_ru3_ru0, ppet, ru, nssm1) \ |
| do { \ |
| ppet16_ppet8_ru3_ru0[nssm1] &= ~(7 << (((ru-1)%4)*6+3)); \ |
| ppet16_ppet8_ru3_ru0[nssm1] |= ((ppet&7) << (((ru-1)%4)*6+3)); \ |
| } while (0) |
| |
| #define WMI_GET_PPET16(ppet16_ppet8_ru3_ru0, ru, nssm1) \ |
| ((ppet16_ppet8_ru3_ru0[nssm1] >> (((ru-1)%4)*6+3))&7) |
| |
| typedef struct _wmi_ppe_threshold { |
| A_UINT32 numss_m1; /** NSS - 1*/ |
| A_UINT32 ru_count; /** Max RU count */ |
| /** ppet8 and ppet16 for max num ss */ |
| A_UINT32 ppet16_ppet8_ru3_ru0[WMI_MAX_NUM_SS]; |
| } wmi_ppe_threshold; |
| |
| /* WMI_SYS_CAPS_* refer to the capabilities that system support |
| */ |
| #define WMI_SYS_CAP_ENABLE 0x00000001 |
| #define WMI_SYS_CAP_TXPOWER 0x00000002 |
| |
| /* |
| * WMI Dual Band Simultaneous (DBS) hardware mode list bit-mask definitions. |
| * Bits 5:0 are reserved |
| */ |
| #define WMI_DBS_HW_MODE_MAC0_TX_STREAMS_BITPOS (28) |
| #define WMI_DBS_HW_MODE_MAC0_RX_STREAMS_BITPOS (24) |
| #define WMI_DBS_HW_MODE_MAC1_TX_STREAMS_BITPOS (20) |
| #define WMI_DBS_HW_MODE_MAC1_RX_STREAMS_BITPOS (16) |
| #define WMI_DBS_HW_MODE_MAC0_BANDWIDTH_BITPOS (12) |
| #define WMI_DBS_HW_MODE_MAC1_BANDWIDTH_BITPOS (8) |
| #define WMI_DBS_HW_MODE_DBS_MODE_BITPOS (7) |
| #define WMI_DBS_HW_MODE_AGILE_DFS_MODE_BITPOS (6) |
| |
| #define WMI_DBS_HW_MODE_MAC0_TX_STREAMS_MASK (0xf << WMI_DBS_HW_MODE_MAC0_TX_STREAMS_BITPOS) |
| #define WMI_DBS_HW_MODE_MAC0_RX_STREAMS_MASK (0xf << WMI_DBS_HW_MODE_MAC0_RX_STREAMS_BITPOS) |
| #define WMI_DBS_HW_MODE_MAC1_TX_STREAMS_MASK (0xf << WMI_DBS_HW_MODE_MAC1_TX_STREAMS_BITPOS) |
| #define WMI_DBS_HW_MODE_MAC1_RX_STREAMS_MASK (0xf << WMI_DBS_HW_MODE_MAC1_RX_STREAMS_BITPOS) |
| #define WMI_DBS_HW_MODE_MAC0_BANDWIDTH_MASK (0xf << WMI_DBS_HW_MODE_MAC0_BANDWIDTH_BITPOS) |
| #define WMI_DBS_HW_MODE_MAC1_BANDWIDTH_MASK (0xf << WMI_DBS_HW_MODE_MAC1_BANDWIDTH_BITPOS) |
| #define WMI_DBS_HW_MODE_DBS_MODE_MASK (0x1 << WMI_DBS_HW_MODE_DBS_MODE_BITPOS) |
| #define WMI_DBS_HW_MODE_AGILE_DFS_MODE_MASK (0x1 << WMI_DBS_HW_MODE_AGILE_DFS_MODE_BITPOS) |
| |
| #define WMI_DBS_HW_MODE_MAC0_TX_STREAMS_SET(hw_mode, value) \ |
| WMI_SET_BITS(hw_mode, WMI_DBS_HW_MODE_MAC0_TX_STREAMS_BITPOS, 4, value) |
| #define WMI_DBS_HW_MODE_MAC0_RX_STREAMS_SET(hw_mode, value) \ |
| WMI_SET_BITS(hw_mode, WMI_DBS_HW_MODE_MAC0_RX_STREAMS_BITPOS, 4, value) |
| #define WMI_DBS_HW_MODE_MAC1_TX_STREAMS_SET(hw_mode, value) \ |
| WMI_SET_BITS(hw_mode, WMI_DBS_HW_MODE_MAC1_TX_STREAMS_BITPOS, 4, value) |
| #define WMI_DBS_HW_MODE_MAC1_RX_STREAMS_SET(hw_mode, value) \ |
| WMI_SET_BITS(hw_mode, WMI_DBS_HW_MODE_MAC1_RX_STREAMS_BITPOS, 4, value) |
| #define WMI_DBS_HW_MODE_MAC0_BANDWIDTH_SET(hw_mode, value) \ |
| WMI_SET_BITS(hw_mode, WMI_DBS_HW_MODE_MAC0_BANDWIDTH_BITPOS, 4, value) |
| #define WMI_DBS_HW_MODE_MAC1_BANDWIDTH_SET(hw_mode, value) \ |
| WMI_SET_BITS(hw_mode, WMI_DBS_HW_MODE_MAC1_BANDWIDTH_BITPOS, 4, value) |
| #define WMI_DBS_HW_MODE_DBS_MODE_SET(hw_mode, value) \ |
| WMI_SET_BITS(hw_mode, WMI_DBS_HW_MODE_DBS_MODE_BITPOS, 1, value) |
| #define WMI_DBS_HW_MODE_AGILE_DFS_SET(hw_mode, value) \ |
| WMI_SET_BITS(hw_mode, WMI_DBS_HW_MODE_AGILE_DFS_MODE_BITPOS, 1, value) |
| |
| #define WMI_DBS_HW_MODE_MAC0_TX_STREAMS_GET(hw_mode) \ |
| ((hw_mode & WMI_DBS_HW_MODE_MAC0_TX_STREAMS_MASK) >> WMI_DBS_HW_MODE_MAC0_TX_STREAMS_BITPOS) |
| #define WMI_DBS_HW_MODE_MAC0_RX_STREAMS_GET(hw_mode) \ |
| ((hw_mode & WMI_DBS_HW_MODE_MAC0_RX_STREAMS_MASK) >> WMI_DBS_HW_MODE_MAC0_RX_STREAMS_BITPOS) |
| #define WMI_DBS_HW_MODE_MAC1_TX_STREAMS_GET(hw_mode) \ |
| ((hw_mode & WMI_DBS_HW_MODE_MAC1_TX_STREAMS_MASK) >> WMI_DBS_HW_MODE_MAC1_TX_STREAMS_BITPOS) |
| #define WMI_DBS_HW_MODE_MAC1_RX_STREAMS_GET(hw_mode) \ |
| ((hw_mode & WMI_DBS_HW_MODE_MAC1_RX_STREAMS_MASK) >> WMI_DBS_HW_MODE_MAC1_RX_STREAMS_BITPOS) |
| #define WMI_DBS_HW_MODE_MAC0_BANDWIDTH_GET(hw_mode) \ |
| ((hw_mode & WMI_DBS_HW_MODE_MAC0_BANDWIDTH_MASK) >> WMI_DBS_HW_MODE_MAC0_BANDWIDTH_BITPOS) |
| #define WMI_DBS_HW_MODE_MAC1_BANDWIDTH_GET(hw_mode) \ |
| ((hw_mode & WMI_DBS_HW_MODE_MAC1_BANDWIDTH_MASK) >> WMI_DBS_HW_MODE_MAC1_BANDWIDTH_BITPOS) |
| #define WMI_DBS_HW_MODE_DBS_MODE_GET(hw_mode) \ |
| ((hw_mode & WMI_DBS_HW_MODE_DBS_MODE_MASK) >> WMI_DBS_HW_MODE_DBS_MODE_BITPOS) |
| #define WMI_DBS_HW_MODE_AGILE_DFS_GET(hw_mode) \ |
| ((hw_mode & WMI_DBS_HW_MODE_AGILE_DFS_MODE_MASK) >> WMI_DBS_HW_MODE_AGILE_DFS_MODE_BITPOS) |
| |
| #define WMI_DBS_CONC_SCAN_CFG_DBS_SCAN_BITPOS (31) |
| #define WMI_DBS_CONC_SCAN_CFG_AGILE_SCAN_BITPOS (30) |
| #define WMI_DBS_CONC_SCAN_CFG_AGILE_DFS_SCAN_BITPOS (29) |
| |
| #define WMI_DBS_CONC_SCAN_CFG_DBS_SCAN_MASK (0x1 << WMI_DBS_CONC_SCAN_CFG_DBS_SCAN_BITPOS) |
| #define WMI_DBS_CONC_SCAN_CFG_AGILE_SCAN_MASK (0x1 << WMI_DBS_CONC_SCAN_CFG_AGILE_SCAN_BITPOS) |
| #define WMI_DBS_CONC_SCAN_CFG_AGILE_DFS_SCAN_MASK (0x1 << WMI_DBS_CONC_SCAN_CFG_AGILE_DFS_SCAN_BITPOS) |
| |
| #define WMI_DBS_CONC_SCAN_CFG_DBS_SCAN_SET(scan_cfg, value) \ |
| WMI_SET_BITS(scan_cfg, WMI_DBS_CONC_SCAN_CFG_DBS_SCAN_BITPOS, 1, value) |
| #define WMI_DBS_CONC_SCAN_CFG_AGILE_SCAN_SET(scan_cfg, value) \ |
| WMI_SET_BITS(scan_cfg, WMI_DBS_CONC_SCAN_CFG_AGILE_SCAN_BITPOS, 1, value) |
| #define WMI_DBS_CONC_SCAN_CFG_AGILE_DFS_SCAN_SET(scan_cfg, value) \ |
| WMI_SET_BITS(scan_cfg, WMI_DBS_CONC_SCAN_CFG_AGILE_DFS_SCAN_BITPOS, 1, value) |
| |
| #define WMI_DBS_CONC_SCAN_CFG_DBS_SCAN_GET(scan_cfg) \ |
| ((scan_cfg & WMI_DBS_CONC_SCAN_CFG_DBS_SCAN_MASK) >> WMI_DBS_CONC_SCAN_CFG_DBS_SCAN_BITPOS) |
| #define WMI_DBS_CONC_SCAN_CFG_AGILE_SCAN_GET(scan_cfg) \ |
| ((scan_cfg & WMI_DBS_CONC_SCAN_CFG_AGILE_SCAN_MASK) >> WMI_DBS_CONC_SCAN_CFG_AGILE_SCAN_BITPOS) |
| #define WMI_DBS_CONC_SCAN_CFG_AGILE_DFS_SCAN_GET(scan_cfg) \ |
| ((scan_cfg & WMI_DBS_CONC_SCAN_CFG_AGILE_DFS_SCAN_MASK) >> WMI_DBS_CONC_SCAN_CFG_AGILE_DFS_SCAN_BITPOS) |
| |
| #define WMI_DBS_FW_MODE_CFG_DBS_BITPOS (31) |
| #define WMI_DBS_FW_MODE_CFG_AGILE_DFS_BITPOS (30) |
| |
| #define WMI_DBS_FW_MODE_CFG_DBS_MASK (0x1 << WMI_DBS_FW_MODE_CFG_DBS_BITPOS) |
| #define WMI_DBS_FW_MODE_CFG_AGILE_DFS_MASK (0x1 << WMI_DBS_FW_MODE_CFG_AGILE_DFS_BITPOS) |
| |
| #define WMI_DBS_FW_MODE_CFG_DBS_SET(fw_mode, value) \ |
| WMI_SET_BITS(fw_mode, WMI_DBS_FW_MODE_CFG_DBS_BITPOS, 1, value) |
| #define WMI_DBS_FW_MODE_CFG_AGILE_DFS_SET(fw_mode, value) \ |
| WMI_SET_BITS(fw_mode, WMI_DBS_FW_MODE_CFG_AGILE_DFS_BITPOS, 1, value) |
| |
| #define WMI_DBS_FW_MODE_CFG_DBS_GET(fw_mode) \ |
| ((fw_mode & WMI_DBS_FW_MODE_CFG_DBS_MASK) >> WMI_DBS_FW_MODE_CFG_DBS_BITPOS) |
| #define WMI_DBS_FW_MODE_CFG_AGILE_DFS_GET(fw_mode) \ |
| ((fw_mode & WMI_DBS_FW_MODE_CFG_AGILE_DFS_MASK) >> WMI_DBS_FW_MODE_CFG_AGILE_DFS_BITPOS) |
| |
| /** NOTE: This structure cannot be extended in the future without breaking WMI compatibility */ |
| typedef struct _wmi_abi_version { |
| A_UINT32 abi_version_0; |
| /** WMI Major and Minor versions */ |
| A_UINT32 abi_version_1; |
| /** WMI change revision */ |
| A_UINT32 abi_version_ns_0; |
| /** ABI version namespace first four dwords */ |
| A_UINT32 abi_version_ns_1; |
| /** ABI version namespace second four dwords */ |
| A_UINT32 abi_version_ns_2; |
| /** ABI version namespace third four dwords */ |
| A_UINT32 abi_version_ns_3; |
| /** ABI version namespace fourth four dwords */ |
| } wmi_abi_version; |
| |
| /* |
| * maximum number of memroy requests allowed from FW. |
| */ |
| #define WMI_MAX_MEM_REQS 16 |
| |
| /* !!NOTE!!: |
| * This HW_BD_INFO_SIZE cannot be changed without breaking compatibility. |
| * Please don't change it. |
| */ |
| #define HW_BD_INFO_SIZE 5 |
| |
| /** |
| * PDEV ID to identify the physical device, |
| * value 0 reserved for SOC level commands/event |
| */ |
| #define WMI_PDEV_ID_SOC 0 /* SOC level, applicable to all PDEVs */ |
| #define WMI_PDEV_ID_1ST 1 /* first pdev (pdev 0) */ |
| #define WMI_PDEV_ID_2ND 2 /* second pdev (pdev 1) */ |
| #define WMI_PDEV_ID_3RD 3 /* third pdev (pdev 2) */ |
| |
| /** |
| * The following struct holds optional payload for |
| * wmi_service_ready_event_fixed_param,e.g., 11ac pass some of the |
| * device capability to the host. |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_SERVICE_READY_EVENT */ |
| A_UINT32 fw_build_vers; /* firmware build number */ |
| wmi_abi_version fw_abi_vers; |
| A_UINT32 phy_capability; /* WMI_PHY_CAPABILITY */ |
| A_UINT32 max_frag_entry; /* Maximum number of frag table entries that SW will populate less 1 */ |
| A_UINT32 num_rf_chains; |
| /* The following field is only valid for service type WMI_SERVICE_11AC */ |
| A_UINT32 ht_cap_info; /* WMI HT Capability */ |
| A_UINT32 vht_cap_info; /* VHT capability info field of 802.11ac */ |
| A_UINT32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ |
| A_UINT32 hw_min_tx_power; |
| A_UINT32 hw_max_tx_power; |
| A_UINT32 sys_cap_info; |
| A_UINT32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ |
| /** Max beacon and Probe Response IE offload size (includes |
| * optional P2P IEs) */ |
| A_UINT32 max_bcn_ie_size; |
| /* |
| * request to host to allocate a chuck of memory and pss it down to FW via WM_INIT. |
| * FW uses this as FW extesnsion memory for saving its data structures. Only valid |
| * for low latency interfaces like PCIE where FW can access this memory directly (or) |
| * by DMA. |
| */ |
| A_UINT32 num_mem_reqs; |
| /* Max No. scan channels target can support |
| * If FW is too old and doesn't indicate this number, host side value will default to |
| * 0, and host will take the original compatible value (62) for future scan channel |
| * setup. |
| */ |
| A_UINT32 max_num_scan_channels; |
| |
| /* Hardware board specific ID. Values defined in enum WMI_HWBOARD_ID. |
| * Default 0 means tha hw_bd_info[] is invalid(legacy board). |
| */ |
| A_UINT32 hw_bd_id; |
| A_UINT32 hw_bd_info[HW_BD_INFO_SIZE]; /* Board specific information. Invalid if hw_hd_id is zero. */ |
| |
| /* |
| * Number of MACs supported, i.e. a DBS-capable device will return 2 |
| */ |
| A_UINT32 max_supported_macs; |
| |
| /* |
| * FW sub-feature capabilities to be used in concurrence with |
| * wmi_service_bitmap |
| * values from enum WMI_FW_SUB_FEAT_CAPS |
| */ |
| A_UINT32 wmi_fw_sub_feat_caps; |
| /* |
| * Number of Dual Band Simultaneous (DBS) hardware modes |
| */ |
| A_UINT32 num_dbs_hw_modes; |
| /* |
| * txrx_chainmask |
| * [7:0] - 2G band tx chain mask |
| * [15:8] - 2G band rx chain mask |
| * [23:16] - 5G band tx chain mask |
| * [31:24] - 5G band rx chain mask |
| * |
| */ |
| A_UINT32 txrx_chainmask; |
| |
| /* |
| * default Dual Band Simultaneous (DBS) hardware mode |
| */ |
| A_UINT32 default_dbs_hw_mode_index; |
| |
| /* |
| * Number of msdu descriptors target would use |
| */ |
| A_UINT32 num_msdu_desc; |
| |
| /* The TLVs for hal_reg_capabilities, wmi_service_bitmap and mem_reqs[] will follow this TLV. |
| * HAL_REG_CAPABILITIES hal_reg_capabilities; |
| * A_UINT32 wmi_service_bitmap[WMI_SERVICE_BM_SIZE]; |
| * wlan_host_mem_req mem_reqs[]; |
| * wlan_dbs_hw_mode_list[]; |
| */ |
| } wmi_service_ready_event_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| *WMITLV_TAG_STRUC_WMI_SERVICE_EXT_READY_EVENT |
| */ |
| A_UINT32 tlv_header; |
| /* which WMI_DBS_CONC_SCAN_CFG setting the FW is initialized with */ |
| A_UINT32 default_conc_scan_config_bits; |
| /* which WMI_DBS_FW_MODE_CFG setting the FW is initialized with */ |
| A_UINT32 default_fw_config_bits; |
| wmi_ppe_threshold ppet; |
| /* see section 8.4.2.213 from draft r8 of 802.11ax */ |
| A_UINT32 he_cap_info; |
| /* |
| * An HT STA shall not allow transmission of more than one MPDU start |
| * within the time limit described in the MPDU maximum density field. |
| */ |
| A_UINT32 mpdu_density; /* units are microseconds */ |
| } wmi_service_ready_ext_event_fixed_param; |
| |
| typedef enum { |
| WMI_HWBD_NONE = 0, /* No hw board information is given */ |
| WMI_HWBD_QCA6174 = 1, /* Rome(AR6320) */ |
| WMI_HWBD_QCA2582 = 2, /* Killer 1525 */ |
| } WMI_HWBD_ID; |
| |
| typedef enum { |
| WMI_FW_STA_RTT_INITR = 0x00000001, |
| WMI_FW_STA_RTT_RESPR = 0x00000002, |
| WMI_FW_P2P_CLI_RTT_INITR = 0x00000004, |
| WMI_FW_P2P_CLI_RTT_RESPR = 0x00000008, |
| WMI_FW_P2P_GO_RTT_INITR = 0x00000010, |
| WMI_FW_P2P_GO_RTT_RESPR = 0x00000020, |
| WMI_FW_AP_RTT_INITR = 0x00000040, |
| WMI_FW_AP_RTT_RESPR = 0x00000080, |
| WMI_FW_NAN_RTT_INITR = 0x00000100, |
| WMI_FW_NAN_RTT_RESPR = 0x00000200, |
| /* |
| * New fw sub feature capabilites before |
| * WMI_FW_MAX_SUB_FEAT_CAP |
| */ |
| WMI_FW_MAX_SUB_FEAT_CAP = 0x80000000, |
| } WMI_FW_SUB_FEAT_CAPS; |
| |
| #define ATH_BD_DATA_REV_MASK 0x000000FF |
| #define ATH_BD_DATA_REV_SHIFT 0 |
| |
| #define ATH_BD_DATA_PROJ_ID_MASK 0x0000FF00 |
| #define ATH_BD_DATA_PROJ_ID_SHIFT 8 |
| |
| #define ATH_BD_DATA_CUST_ID_MASK 0x00FF0000 |
| #define ATH_BD_DATA_CUST_ID_SHIFT 16 |
| |
| #define ATH_BD_DATA_REF_DESIGN_ID_MASK 0xFF000000 |
| #define ATH_BD_DATA_REF_DESIGN_ID_SHIFT 24 |
| |
| #define SET_BD_DATA_REV(bd_data_ver, value) \ |
| ((bd_data_ver) &= ~ATH_BD_DATA_REV_MASK, (bd_data_ver) |= ((value) << ATH_BD_DATA_REV_SHIFT)) |
| |
| #define GET_BD_DATA_REV(bd_data_ver) \ |
| (((bd_data_ver) & ATH_BD_DATA_REV_MASK) >> ATH_BD_DATA_REV_SHIFT) |
| |
| #define SET_BD_DATA_PROJ_ID(bd_data_ver, value) \ |
| ((bd_data_ver) &= ~ATH_BD_DATA_PROJ_ID_MASK, (bd_data_ver) |= ((value) << ATH_BD_DATA_PROJ_ID_SHIFT)) |
| |
| #define GET_BD_DATA_PROJ_ID(bd_data_ver) \ |
| (((bd_data_ver) & ATH_BD_DATA_PROJ_ID_MASK) >> ATH_BD_DATA_PROJ_ID_SHIFT) |
| |
| #define SET_BD_DATA_CUST_ID(bd_data_ver, value) \ |
| ((bd_data_ver) &= ~ATH_BD_DATA_CUST_ID_MASK, (bd_data_ver) |= ((value) << ATH_BD_DATA_CUST_ID_SHIFT)) |
| |
| #define GET_BD_DATA_CUST_ID(bd_data_ver) \ |
| (((bd_data_ver) & ATH_BD_DATA_CUST_ID_MASK) >> ATH_BD_DATA_CUST_ID_SHIFT) |
| |
| #define SET_BD_DATA_REF_DESIGN_ID(bd_data_ver, value) \ |
| ((bd_data_ver) &= ~ATH_BD_DATA_REF_DESIGN_ID_MASK, (bd_data_ver) |= ((value) << ATH_BD_DATA_REF_DESIGN_ID_SHIFT)) |
| |
| #define GET_BD_DATA_REF_DESIGN_ID(bd_data_ver) \ |
| (((bd_data_ver) & ATH_BD_DATA_REF_DESIGN_ID_MASK) >> ATH_BD_DATA_REF_DESIGN_ID_SHIFT) |
| |
| #ifdef ROME_LTE_COEX_FREQ_AVOID |
| typedef struct { |
| A_UINT32 start_freq; /* start frequency, not channel center freq */ |
| A_UINT32 end_freq; /* end frequency */ |
| } avoid_freq_range_desc; |
| |
| typedef struct { |
| /* bad channel range count, multi range is allowed, 0 means all channel clear */ |
| A_UINT32 num_freq_ranges; |
| /* multi range with num_freq_ranges, LTE advance multi carrier, CDMA,etc */ |
| avoid_freq_range_desc avd_freq_range[0]; |
| } wmi_wlan_avoid_freq_ranges_event; |
| #endif |
| |
| /** status consists of upper 16 bits fo A_STATUS status and lower 16 bits of module ID that retuned status */ |
| #define WLAN_INIT_STATUS_SUCCESS 0x0 |
| #define WLAN_INIT_STATUS_GEN_FAILED 0x1 |
| #define WLAN_GET_INIT_STATUS_REASON(status) ((status) & 0xffff) |
| #define WLAN_GET_INIT_STATUS_MODULE_ID(status) (((status) >> 16) & 0xffff) |
| |
| typedef A_UINT32 WLAN_INIT_STATUS; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ready_event_fixed_param */ |
| wmi_abi_version fw_abi_vers; |
| wmi_mac_addr mac_addr; |
| A_UINT32 status; |
| } wmi_ready_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_resource_config */ |
| /** |
| * @brief num_vdev - number of virtual devices (VAPs) to support |
| */ |
| A_UINT32 num_vdevs; |
| /** |
| * @brief num_peers - number of peer nodes to support |
| */ |
| A_UINT32 num_peers; |
| /* |
| * @brief In offload mode target supports features like WOW, chatter and other |
| * protocol offloads. In order to support them some functionalities like |
| * reorder buffering, PN checking need to be done in target. This determines |
| * maximum number of peers suported by target in offload mode |
| */ |
| A_UINT32 num_offload_peers; |
| /* @brief Number of reorder buffers available for doing target based reorder |
| * Rx reorder buffering |
| */ |
| A_UINT32 num_offload_reorder_buffs; |
| /** |
| * @brief num_peer_keys - number of keys per peer |
| */ |
| A_UINT32 num_peer_keys; |
| /** |
| * @brief num_peer_tids - number of TIDs to provide storage for per peer. |
| */ |
| A_UINT32 num_tids; |
| /** |
| * @brief ast_skid_limit - max skid for resolving hash collisions |
| * @details |
| * The address search table is sparse, so that if two MAC addresses |
| * result in the same hash value, the second of these conflicting |
| * entries can slide to the next index in the address search table, |
| * and use it, if it is unoccupied. This ast_skid_limit parameter |
| * specifies the upper bound on how many subsequent indices to search |
| * over to find an unoccupied space. |
| */ |
| A_UINT32 ast_skid_limit; |
| /** |
| * @brief tx_chain_mask - the nominal chain mask for transmit |
| * @details |
| * The chain mask may be modified dynamically, e.g. to operate AP tx with |
| * a reduced number of chains if no clients are associated. |
| * This configuration parameter specifies the nominal chain-mask that |
| * should be used when not operating with a reduced set of tx chains. |
| */ |
| A_UINT32 tx_chain_mask; |
| /** |
| * @brief rx_chain_mask - the nominal chain mask for receive |
| * @details |
| * The chain mask may be modified dynamically, e.g. for a client to use |
| * a reduced number of chains for receive if the traffic to the client |
| * is low enough that it doesn't require downlink MIMO or antenna |
| * diversity. |
| * This configuration parameter specifies the nominal chain-mask that |
| * should be used when not operating with a reduced set of rx chains. |
| */ |
| A_UINT32 rx_chain_mask; |
| /** |
| * @brief rx_timeout_pri - what rx reorder timeout (ms) to use for the AC |
| * @details |
| * Each WMM access class (voice, video, best-effort, background) will |
| * have its own timeout value to dictate how long to wait for missing |
| * rx MPDUs to arrive before flushing subsequent MPDUs that have already |
| * been received. |
| * This parameter specifies the timeout in milliseconds for each class . |
| * NOTE: the number of class (defined as 4) cannot be |
| * changed in the future without breaking WMI compatibility. |
| */ |
| A_UINT32 rx_timeout_pri[4]; |
| /** |
| * @brief rx_decap mode - what mode the rx should decap packets to |
| * @details |
| * MAC can decap to RAW (no decap), native wifi or Ethernet types |
| * THis setting also determines the default TX behavior, however TX |
| * behavior can be modified on a per VAP basis during VAP init |
| */ |
| A_UINT32 rx_decap_mode; |
| /** |
| * @brief scan_max_pending_req - what is the maximum scan requests than can be queued |
| */ |
| A_UINT32 scan_max_pending_req; |
| |
| /** |
| * @brief maximum VDEV that could use BMISS offload |
| */ |
| A_UINT32 bmiss_offload_max_vdev; |
| |
| /** |
| * @brief maximum VDEV that could use offload roaming |
| */ |
| A_UINT32 roam_offload_max_vdev; |
| |
| /** |
| * @brief maximum AP profiles that would push to offload roaming |
| */ |
| A_UINT32 roam_offload_max_ap_profiles; |
| |
| /** |
| * @brief num_mcast_groups - how many groups to use for mcast->ucast conversion |
| * @details |
| * The target's WAL maintains a table to hold information regarding which |
| * peers belong to a given multicast group, so that if multicast->unicast |
| * conversion is enabled, the target can convert multicast tx frames to a |
| * series of unicast tx frames, to each peer within the multicast group. |
| * This num_mcast_groups configuration parameter tells the target how |
| * many multicast groups to provide storage for within its multicast |
| * group membership table. |
| */ |
| A_UINT32 num_mcast_groups; |
| |
| /** |
| * @brief num_mcast_table_elems - size to alloc for the mcast membership table |
| * @details |
| * This num_mcast_table_elems configuration parameter tells the target |
| * how many peer elements it needs to provide storage for in its |
| * multicast group membership table. |
| * These multicast group membership table elements are shared by the |
| * multicast groups stored within the table. |
| */ |
| A_UINT32 num_mcast_table_elems; |
| |
| /** |
| * @brief mcast2ucast_mode - whether/how to do multicast->unicast conversion |
| * @details |
| * This configuration parameter specifies whether the target should |
| * perform multicast --> unicast conversion on transmit, and if so, |
| * what to do if it finds no entries in its multicast group membership |
| * table for the multicast IP address in the tx frame. |
| * Configuration value: |
| * 0 -> Do not perform multicast to unicast conversion. |
| * 1 -> Convert multicast frames to unicast, if the IP multicast address |
| * from the tx frame is found in the multicast group membership |
| * table. If the IP multicast address is not found, drop the frame. |
| * 2 -> Convert multicast frames to unicast, if the IP multicast address |
| * from the tx frame is found in the multicast group membership |
| * table. If the IP multicast address is not found, transmit the |
| * frame as multicast. |
| */ |
| A_UINT32 mcast2ucast_mode; |
| |
| /** |
| * @brief tx_dbg_log_size - how much memory to allocate for a tx PPDU dbg log |
| * @details |
| * This parameter controls how much memory the target will allocate to |
| * store a log of tx PPDU meta-information (how large the PPDU was, |
| * when it was sent, whether it was successful, etc.) |
| */ |
| A_UINT32 tx_dbg_log_size; |
| |
| /** |
| * @brief num_wds_entries - how many AST entries to be allocated for WDS |
| */ |
| A_UINT32 num_wds_entries; |
| |
| /** |
| * @brief dma_burst_size - MAC DMA burst size, e.g., on Peregrine on PCI |
| * this limit can be 0 -default, 1 256B |
| */ |
| A_UINT32 dma_burst_size; |
| |
| /** |
| * @brief mac_aggr_delim - Fixed delimiters to be inserted after every MPDU |
| * to account for interface latency to avoid underrun. |
| */ |
| A_UINT32 mac_aggr_delim; |
| /** |
| * @brief rx_skip_defrag_timeout_dup_detection_check |
| * @details |
| * determine whether target is responsible for detecting duplicate |
| * non-aggregate MPDU and timing out stale fragments. |
| * |
| * A-MPDU reordering is always performed on the target. |
| * |
| * 0: target responsible for frag timeout and dup checking |
| * 1: host responsible for frag timeout and dup checking |
| */ |
| A_UINT32 rx_skip_defrag_timeout_dup_detection_check; |
| |
| /** |
| * @brief vow_config - Configuration for VoW : No of Video Nodes to be supported |
| * and Max no of descriptors for each Video link (node). |
| */ |
| A_UINT32 vow_config; |
| |
| /** |
| * @brief maximum VDEV that could use GTK offload |
| */ |
| A_UINT32 gtk_offload_max_vdev; |
| |
| /** |
| * @brief num_msdu_desc - Number of msdu descriptors target should use |
| */ |
| A_UINT32 num_msdu_desc; /* Number of msdu desc */ |
| /** |
| * @brief max_frag_entry - Max. number of Tx fragments per MSDU |
| * @details |
| * This parameter controls the max number of Tx fragments per MSDU. |
| * This is sent by the target as part of the WMI_SERVICE_READY event |
| * and is overriden by the OS shim as required. |
| */ |
| A_UINT32 max_frag_entries; |
| |
| /** |
| * @brief num_tdls_vdevs - Max. number of vdevs that can support TDLS |
| * @brief num_msdu_desc - Number of vdev that can support beacon offload |
| */ |
| |
| A_UINT32 num_tdls_vdevs; /* number of vdevs allowed to do tdls */ |
| |
| /** |
| * @brief num_tdls_conn_table_entries - Number of peers tracked by tdls vdev |
| * @details |
| * Each TDLS enabled vdev can track outgoing transmits/rssi/rates to/of |
| * peers in a connection tracking table for possible TDLS link creation |
| * or deletion. This controls the number of tracked peers per vdev. |
| */ |
| A_UINT32 num_tdls_conn_table_entries; /* number of peers to track per TDLS vdev */ |
| A_UINT32 beacon_tx_offload_max_vdev; |
| A_UINT32 num_multicast_filter_entries; |
| A_UINT32 num_wow_filters; /*host can configure the number of wow filters */ |
| |
| /** |
| * @brief num_keep_alive_pattern - Num of keep alive patterns configured |
| * from host. |
| */ |
| A_UINT32 num_keep_alive_pattern; |
| /** |
| * @brief keep_alive_pattern_size - keep alive pattern size. |
| */ |
| A_UINT32 keep_alive_pattern_size; |
| |
| /** |
| * @brief max_tdls_concurrent_sleep_sta - Number of tdls sleep sta supported |
| * @details |
| * Each TDLS STA can become a sleep STA independently. This parameter |
| * mentions how many such sleep STAs can be supported concurrently. |
| */ |
| A_UINT32 max_tdls_concurrent_sleep_sta; |
| |
| /** |
| * @brief max_tdls_concurrent_buffer_sta - Number of tdls buffer sta supported |
| * @details |
| * Each TDLS STA can become a buffer STA independently. This parameter |
| * mentions how many such buffer STAs can be supported concurrently. |
| */ |
| A_UINT32 max_tdls_concurrent_buffer_sta; |
| |
| /** |
| * @brief wmi_send_separate - host configures fw to send the wmi separately |
| */ |
| A_UINT32 wmi_send_separate; |
| |
| /** |
| * @brief num_ocb_vdevs - Number of vdevs used for OCB support |
| */ |
| A_UINT32 num_ocb_vdevs; |
| |
| /** |
| * @brief num_ocb_channels - The supported number of simultaneous OCB channels |
| */ |
| A_UINT32 num_ocb_channels; |
| |
| /** |
| * @brief num_ocb_schedules - The supported number of OCB schedule segments |
| */ |
| A_UINT32 num_ocb_schedules; |
| /** |
| * @brief specific configuration from host, such as per platform configuration |
| */ |
| #define WMI_RSRC_CFG_FLAG_WOW_IGN_PCIE_RST_S 0 |
| #define WMI_RSRC_CFG_FLAG_WOW_IGN_PCIE_RST_M 0x1 |
| |
| #define WMI_RSRC_CFG_FLAG_LTEU_SUPPORT_S 1 |
| #define WMI_RSRC_CFG_FLAG_LTEU_SUPPORT_M 0x2 |
| |
| #define WMI_RSRC_CFG_FLAG_COEX_GPIO_SUPPORT_S 2 |
| #define WMI_RSRC_CFG_FLAG_COEX_GPIO_SUPPORT_M 0x4 |
| |
| #define WMI_RSRC_CFG_FLAG_AUX_RADIO_SPECTRAL_INTF_S 3 |
| #define WMI_RSRC_CFG_FLAG_AUX_RADIO_SPECTRAL_INTF_M 0x8 |
| |
| #define WMI_RSRC_CFG_FLAG_AUX_RADIO_CHAN_LOAD_INTF_S 4 |
| #define WMI_RSRC_CFG_FLAG_AUX_RADIO_CHAN_LOAD_INTF_M 0x10 |
| |
| #define WMI_RSRC_CFG_FLAG_BSS_CHANNEL_INFO_64_S 5 |
| #define WMI_RSRC_CFG_FLAG_BSS_CHANNEL_INFO_64_M 0x20 |
| |
| #define WMI_RSRC_CFG_FLAG_ATF_CONFIG_ENABLE_S 6 |
| #define WMI_RSRC_CFG_FLAG_ATF_CONFIG_ENABLE_M 0x40 |
| |
| #define WMI_RSRC_CFG_FLAG_IPHR_PAD_CONFIG_ENABLE_S 7 |
| #define WMI_RSRC_CFG_FLAG_IPHR_PAD_CONFIG_ENABLE_M 0x80 |
| |
| #define WMI_RSRC_CFG_FLAG_QWRAP_MODE_ENABLE_S 8 |
| #define WMI_RSRC_CFG_FLAG_QWRAP_MODE_ENABLE_M 0x100 |
| |
| A_UINT32 flag1; |
| |
| /** @brief smart_ant_cap - Smart Antenna capabilities information |
| * @details |
| * 1 - Smart antenna is enabled. |
| * 0 - Smart antenna is disabled. |
| * In future this can contain smart antenna specifc capabilities. |
| */ |
| A_UINT32 smart_ant_cap; |
| |
| /** |
| * User can configure the buffers allocated for each AC (BE, BK, VI, VO) |
| * during init |
| */ |
| A_UINT32 BK_Minfree; |
| A_UINT32 BE_Minfree; |
| A_UINT32 VI_Minfree; |
| A_UINT32 VO_Minfree; |
| |
| /** |
| * @brief alloc_frag_desc_for_data_pkt . Controls data packet fragment |
| * descriptor memory allocation. |
| * 1 - Allocate fragment descriptor memory for data packet in firmware. |
| * If host wants to transmit data packet at its desired rate, |
| * this field must be set. |
| * 0 - Don't allocate fragment descriptor for data packet. |
| */ |
| A_UINT32 alloc_frag_desc_for_data_pkt; |
| |
| /* |
| * how much space to allocate for NDP NS (neighbor solicitation) |
| * specs |
| */ |
| A_UINT32 num_ns_ext_tuples_cfg; |
| } wmi_resource_config; |
| |
| #define WMI_RSRC_CFG_FLAG_SET(word32, flag, value) \ |
| do { \ |
| (word32) &= ~WMI_RSRC_CFG_FLAG_ ## flag ## _M; \ |
| (word32) |= ((value) << WMI_RSRC_CFG_FLAG_ ## flag ## _S) & \ |
| WMI_RSRC_CFG_FLAG_ ## flag ## _M; \ |
| } while (0) |
| #define WMI_RSRC_CFG_FLAG_GET(word32, flag) \ |
| (((word32) & WMI_RSRC_CFG_FLAG_ ## flag ## _M) >> \ |
| WMI_RSRC_CFG_FLAG_ ## flag ## _S) |
| |
| #define WMI_RSRC_CFG_FLAG_WOW_IGN_PCIE_RST_SET(word32, value) \ |
| WMI_RSRC_CFG_FLAG_SET((word32), WOW_IGN_PCIE_RST, (value)) |
| #define WMI_RSRC_CFG_FLAG_WOW_IGN_PCIE_RST_GET(word32) \ |
| WMI_RSRC_CFG_FLAG_GET((word32), WOW_IGN_PCIE_RST) |
| |
| #define WMI_RSRC_CFG_FLAG_LTEU_SUPPORT_SET(word32, value) \ |
| WMI_RSRC_CFG_FLAG_SET((word32), LTEU_SUPPORT, (value)) |
| #define WMI_RSRC_CFG_FLAG_LTEU_SUPPORT_GET(word32) \ |
| WMI_RSRC_CFG_FLAG_GET((word32), LTEU_SUPPORT) |
| |
| #define WMI_RSRC_CFG_FLAG_COEX_GPIO_SUPPORT_SET(word32, value) \ |
| WMI_RSRC_CFG_FLAG_SET((word32), COEX_GPIO_SUPPORT, (value)) |
| #define WMI_RSRC_CFG_FLAG_COEX_GPIO_SUPPORT_GET(word32) \ |
| WMI_RSRC_CFG_FLAG_GET((word32), COEX_GPIO_SUPPORT) |
| |
| #define WMI_RSRC_CFG_FLAG_AUX_RADIO_SPECTRAL_INTF_SET(word32, value) \ |
| WMI_RSRC_CFG_FLAG_SET((word32), AUX_RADIO_SPECTRAL_INTF, (value)) |
| #define WMI_RSRC_CFG_FLAG_AUX_RADIO_SPECTRAL_INTF_GET(word32) \ |
| WMI_RSRC_CFG_FLAG_GET((word32), AUX_RADIO_SPECTRAL_INTF) |
| |
| #define WMI_RSRC_CFG_FLAG_AUX_RADIO_CHAN_LOAD_INTF_SET(word32, value) \ |
| WMI_RSRC_CFG_FLAG_SET((word32), AUX_RADIO_CHAN_LOAD_INTF, (value)) |
| #define WMI_RSRC_CFG_FLAG_AUX_RADIO_CHAN_LOAD_INTF_GET(word32) \ |
| WMI_RSRC_CFG_FLAG_GET((word32), AUX_RADIO_CHAN_LOAD_INTF) |
| |
| #define WMI_RSRC_CFG_FLAG_BSS_CHANNEL_INFO_64_SET(word32, value) \ |
| WMI_RSRC_CFG_FLAG_SET((word32), BSS_CHANNEL_INFO_64, (value)) |
| #define WMI_RSRC_CFG_FLAG_BSS_CHANNEL_INFO_64_GET(word32) \ |
| WMI_RSRC_CFG_FLAG_GET((word32), BSS_CHANNEL_INFO_64) |
| |
| #define WMI_RSRC_CFG_FLAG_ATF_CONFIG_ENABLE_SET(word32, value) \ |
| WMI_RSRC_CFG_FLAG_SET((word32), ATF_CONFIG_ENABLE, (value)) |
| #define WMI_RSRC_CFG_FLAG_ATF_CONFIG_ENABLE_GET(word32) \ |
| WMI_RSRC_CFG_FLAG_GET((word32), ATF_CONFIG_ENABLE) |
| |
| #define WMI_RSRC_CFG_FLAG_IPHR_PAD_CONFIG_ENABLE_SET(word32, value) \ |
| WMI_RSRC_CFG_FLAG_SET((word32), IPHR_PAD_CONFIG_ENABLE, (value)) |
| #define WMI_RSRC_CFG_FLAG_IPHR_PAD_CONFIG_ENABLE_GET(word32) \ |
| WMI_RSRC_CFG_FLAG_GET((word32), IPHR_PAD_CONFIG_ENABLE) |
| |
| #define WMI_RSRC_CFG_FLAG_QWRAP_MODE_ENABLE_SET(word32, value) \ |
| WMI_RSRC_CFG_FLAG_SET((word32), QWRAP_MODE_ENABLE, (value)) |
| #define WMI_RSRC_CFG_FLAG_QWRAP_MODE_ENABLE_GET(word32) \ |
| WMI_RSRC_CFG_FLAG_GET((word32), QWRAP_MODE_ENABLE) |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_init_cmd_fixed_param */ |
| |
| /** The following indicate the WMI versions to be supported by |
| * the host driver. Note that the host driver decide to |
| * "downgrade" its WMI version support and this may not be the |
| * native version of the host driver. */ |
| wmi_abi_version host_abi_vers; |
| |
| A_UINT32 num_host_mem_chunks; |
| /** size of array host_mem_chunks[] */ |
| /* The TLVs for resource_config and host_mem_chunks[] will follow. |
| * wmi_resource_config resource_config; |
| * wlan_host_memory_chunk host_mem_chunks[]; |
| */ |
| |
| } wmi_init_cmd_fixed_param; |
| |
| /** |
| * TLV for channel list |
| */ |
| typedef struct { |
| /** WMI_CHAN_LIST_TAG */ |
| A_UINT32 tag; |
| /** # of channels to scan */ |
| A_UINT32 num_chan; |
| /** channels in Mhz */ |
| A_UINT32 channel_list[1]; |
| } wmi_chan_list; |
| |
| /** |
| * TLV for bssid list |
| */ |
| typedef struct { |
| /** WMI_BSSID_LIST_TAG */ |
| A_UINT32 tag; |
| /** number of bssids */ |
| A_UINT32 num_bssid; |
| /** bssid list */ |
| wmi_mac_addr bssid_list[1]; |
| } wmi_bssid_list; |
| |
| /** |
| * TLV for ie data. |
| */ |
| typedef struct { |
| /** WMI_IE_TAG */ |
| A_UINT32 tag; |
| /** number of bytes in ie data */ |
| A_UINT32 ie_len; |
| /** ie data array (ie_len adjusted to number of words (ie_len + 4)/4 ) */ |
| A_UINT32 ie_data[1]; |
| } wmi_ie_data; |
| |
| typedef struct { |
| /** Len of the SSID */ |
| A_UINT32 ssid_len; |
| /** SSID */ |
| A_UINT32 ssid[8]; |
| } wmi_ssid; |
| |
| typedef struct { |
| /** WMI_SSID_LIST_TAG */ |
| A_UINT32 tag; |
| A_UINT32 num_ssids; |
| wmi_ssid ssids[1]; |
| } wmi_ssid_list; |
| |
| /* prefix used by scan requestor ids on the host */ |
| #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 |
| /* prefix used by scan request ids generated on the host */ |
| /* host cycles through the lower 12 bits to generate ids */ |
| #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 |
| |
| #define WLAN_SCAN_PARAMS_MAX_SSID 16 |
| #define WLAN_SCAN_PARAMS_MAX_BSSID 4 |
| #define WLAN_SCAN_PARAMS_MAX_IE_LEN 512 |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_start_scan_cmd_fixed_param */ |
| /** Scan ID */ |
| A_UINT32 scan_id; |
| /** Scan requestor ID */ |
| A_UINT32 scan_req_id; |
| /** VDEV id(interface) that is requesting scan */ |
| A_UINT32 vdev_id; |
| /** Scan Priority, input to scan scheduler */ |
| A_UINT32 scan_priority; |
| /** Scan events subscription */ |
| A_UINT32 notify_scan_events; |
| /** dwell time in msec on active channels */ |
| A_UINT32 dwell_time_active; |
| /** dwell time in msec on passive channels */ |
| A_UINT32 dwell_time_passive; |
| /** min time in msec on the BSS channel,only valid if atleast one VDEV is active*/ |
| A_UINT32 min_rest_time; |
| /** max rest time in msec on the BSS channel,only valid if at least one VDEV is active*/ |
| /** the scanner will rest on the bss channel at least min_rest_time. after min_rest_time the scanner |
| * will start checking for tx/rx activity on all VDEVs. if there is no activity the scanner will |
| * switch to off channel. if there is activity the scanner will let the radio on the bss channel |
| * until max_rest_time expires.at max_rest_time scanner will switch to off channel |
| * irrespective of activity. activity is determined by the idle_time parameter. |
| */ |
| A_UINT32 max_rest_time; |
| /** time before sending next set of probe requests. |
| * The scanner keeps repeating probe requests transmission with period specified by repeat_probe_time. |
| * The number of probe requests specified depends on the ssid_list and bssid_list |
| */ |
| A_UINT32 repeat_probe_time; |
| /** time in msec between 2 consequetive probe requests with in a set. */ |
| A_UINT32 probe_spacing_time; |
| /** data inactivity time in msec on bss channel that will be used by scanner for measuring the inactivity */ |
| A_UINT32 idle_time; |
| /** maximum time in msec allowed for scan */ |
| A_UINT32 max_scan_time; |
| /** delay in msec before sending first probe request after switching to a channel */ |
| A_UINT32 probe_delay; |
| /** Scan control flags */ |
| A_UINT32 scan_ctrl_flags; |
| /** Burst duration time in msec*/ |
| A_UINT32 burst_duration; |
| |
| /** # if channels to scan. In the TLV channel_list[] */ |
| A_UINT32 num_chan; |
| /** number of bssids. In the TLV bssid_list[] */ |
| A_UINT32 num_bssid; |
| /** number of ssid. In the TLV ssid_list[] */ |
| A_UINT32 num_ssids; |
| /** number of bytes in ie data. In the TLV ie_data[]. Max len is defined by WLAN_SCAN_PARAMS_MAX_IE_LEN */ |
| A_UINT32 ie_len; |
| /** Max number of probes to be sent */ |
| A_UINT32 n_probes; |
| |
| /** |
| * TLV (tag length value ) parameters follow the scan_cmd |
| * structure. The TLV's are: |
| * A_UINT32 channel_list[]; |
| * wmi_ssid ssid_list[]; |
| * wmi_mac_addr bssid_list[]; |
| * A_UINT8 ie_data[]; |
| */ |
| } wmi_start_scan_cmd_fixed_param; |
| |
| /** |
| * scan control flags. |
| */ |
| |
| /** passively scan all channels including active channels */ |
| #define WMI_SCAN_FLAG_PASSIVE 0x1 |
| /** add wild card ssid probe request even though ssid_list is specified. */ |
| #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 |
| /** add cck rates to rates/xrate ie for the generated probe request */ |
| #define WMI_SCAN_ADD_CCK_RATES 0x4 |
| /** add ofdm rates to rates/xrate ie for the generated probe request */ |
| #define WMI_SCAN_ADD_OFDM_RATES 0x8 |
| /** To enable indication of Chan load and Noise floor to host */ |
| #define WMI_SCAN_CHAN_STAT_EVENT 0x10 |
| /** Filter Probe request frames */ |
| #define WMI_SCAN_FILTER_PROBE_REQ 0x20 |
| /**When set, not to scan DFS channels*/ |
| #define WMI_SCAN_BYPASS_DFS_CHN 0x40 |
| /**When set, certain errors are ignored and scan continues. |
| * Different FW scan engine may use its own logic to decide what errors to ignore*/ |
| #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 |
| /** Enable promiscous mode for ese */ |
| #define WMI_SCAN_FILTER_PROMISCOUS 0x100 |
| /** allow to send probe req on DFS channel */ |
| #define WMI_SCAN_FLAG_FORCE_ACTIVE_ON_DFS 0x200 |
| /** add TPC content in probe req frame */ |
| #define WMI_SCAN_ADD_TPC_IE_IN_PROBE_REQ 0x400 |
| /** add DS content in probe req frame */ |
| #define WMI_SCAN_ADD_DS_IE_IN_PROBE_REQ 0x800 |
| /** use random mac address for TA for probe request frame and add |
| * oui specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the probe req frame. |
| * if oui is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored*/ |
| #define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000 |
| /** allow mgmt transmission during off channel scan */ |
| #define WMI_SCAN_OFFCHAN_MGMT_TX 0x2000 |
| /** allow data transmission during off channel scan */ |
| #define WMI_SCAN_OFFCHAN_DATA_TX 0x4000 |
| /** allow capture ppdu with phy errrors */ |
| #define WMI_SCAN_CAPTURE_PHY_ERROR 0x8000 |
| |
| /** WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ |
| #define WMI_SCAN_CLASS_MASK 0xFF000000 |
| |
| /* |
| * Masks identifying types/ID of scans |
| * Scan_Stop macros should be the same value as below defined in UMAC |
| * #define IEEE80211_SPECIFIC_SCAN 0x00000000 |
| * #define IEEE80211_VAP_SCAN 0x01000000 |
| * #define IEEE80211_ALL_SCANS 0x04000000 |
| */ |
| #define WMI_SCAN_STOP_ONE 0x00000000 |
| #define WMI_SCN_STOP_VAP_ALL 0x01000000 |
| #define WMI_SCAN_STOP_ALL 0x04000000 |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_stop_scan_cmd_fixed_param */ |
| /** requestor requesting cancel */ |
| A_UINT32 requestor; |
| /** Scan ID */ |
| A_UINT32 scan_id; |
| /** |
| * Req Type |
| * req_type should be WMI_SCAN_STOP_ONE, WMI_SCN_STOP_VAP_ALL or WMI_SCAN_STOP_ALL |
| * WMI_SCAN_STOP_ONE indicates to stop a specific scan with scan_id |
| * WMI_SCN_STOP_VAP_ALL indicates to stop all scan requests on a specific vDev with vdev_id |
| * WMI_SCAN_STOP_ALL indicates to stop all scan requests in both Scheduler's queue and Scan Engine |
| */ |
| A_UINT32 req_type; |
| /** |
| * vDev ID |
| * used when req_type equals to WMI_SCN_STOP_VAP_ALL, it indexed the vDev on which to stop the scan |
| */ |
| A_UINT32 vdev_id; |
| } wmi_stop_scan_cmd_fixed_param; |
| |
| #define MAX_NUM_CHAN_PER_WMI_CMD 58 /* each WMI cmd can hold 58 channel entries at most */ |
| #define APPEND_TO_EXISTING_CHAN_LIST 1 |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_scan_chan_list_cmd_fixed_param */ |
| A_UINT32 num_scan_chans; |
| /** no of elements in chan_info[] */ |
| A_UINT32 flags; /* Flags used to control the behavior of channel list update on target side */ |
| /** Followed by the variable length TLV chan_info: |
| * wmi_channel chan_info[] */ |
| } wmi_scan_chan_list_cmd_fixed_param; |
| |
| /* |
| * Priority numbers must be sequential, starting with 0. |
| */ |
| /* NOTE: WLAN SCAN_PRIORITY_COUNT can't be changed without breaking the compatibility */ |
| typedef enum { |
| WMI_SCAN_PRIORITY_VERY_LOW = 0, |
| WMI_SCAN_PRIORITY_LOW, |
| WMI_SCAN_PRIORITY_MEDIUM, |
| WMI_SCAN_PRIORITY_HIGH, |
| WMI_SCAN_PRIORITY_VERY_HIGH, |
| |
| WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ |
| } wmi_scan_priority; |
| |
| /* Five Levels for Requested Priority */ |
| /* VERY_LOW LOW MEDIUM HIGH VERY_HIGH */ |
| typedef A_UINT32 WLAN_PRIORITY_MAPPING[WMI_SCAN_PRIORITY_COUNT]; |
| |
| /** |
| * to keep align with UMAC implementation, we pass only vdev_type but not vdev_subtype when we overwrite an entry for a specific vdev_subtype |
| * ex. if we need overwrite P2P Client prority entry, we will overwrite the whole table for WLAN_M_STA |
| * we will generate the new WLAN_M_STA table with modified P2P Client Entry but keep STA entry intact |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_scan_sch_priority_table_cmd_fixed_param */ |
| /** |
| * used as an index to find the proper table for a specific vdev type in default_scan_priority_mapping_table |
| * vdev_type should be one of enum in WLAN_OPMODE which inculdes WLAN_M_IBSS, WLAN_M_STA, WLAN_M_AP and WLAN_M_MONITOR currently |
| */ |
| A_UINT32 vdev_type; |
| /** |
| * number of rows in mapping_table for a specific vdev |
| * for WLAN_M_STA type, there are 3 entries in the table (refer to default_scan_priority_mapping_table definition) |
| */ |
| A_UINT32 number_rows; |
| /** mapping_table for a specific vdev follows this TLV |
| * WLAN_PRIORITY_MAPPING mapping_table[]; */ |
| } wmi_scan_sch_priority_table_cmd_fixed_param; |
| |
| /** update flags */ |
| #define WMI_SCAN_UPDATE_SCAN_PRIORITY 0x1 |
| #define WMI_SCAN_UPDATE_SCAN_MIN_REST_TIME 0x2 |
| #define WMI_SCAN_UPDATE_SCAN_MAX_REST_TIME 0x4 |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** requestor requesting update scan request */ |
| A_UINT32 requestor; |
| /** Scan ID of the scan request that need to be update */ |
| A_UINT32 scan_id; |
| /** update flags, indicating which of the following fields are valid and need to be updated*/ |
| A_UINT32 scan_update_flags; |
| /** scan priority. Only valid if WMI_SCAN_UPDATE_SCAN_PRIORITY flag is set in scan_update_flag */ |
| A_UINT32 scan_priority; |
| /** min rest time. Only valid if WMI_SCAN_UPDATE_MIN_REST_TIME flag is set in scan_update_flag */ |
| A_UINT32 min_rest_time; |
| /** min rest time. Only valid if WMI_SCAN_UPDATE_MAX_REST_TIME flag is set in scan_update_flag */ |
| A_UINT32 max_rest_time; |
| } wmi_scan_update_request_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** oui to be used in probe request frame when random mac addresss is |
| * requested part of scan parameters. this is applied to both FW internal scans and |
| * host initated scans. host can request for random mac address with |
| * WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ flag. */ |
| A_UINT32 prob_req_oui; |
| } wmi_scan_prob_req_oui_cmd_fixed_param; |
| |
| enum wmi_scan_event_type { |
| WMI_SCAN_EVENT_STARTED = 0x1, |
| WMI_SCAN_EVENT_COMPLETED = 0x2, |
| WMI_SCAN_EVENT_BSS_CHANNEL = 0x4, |
| WMI_SCAN_EVENT_FOREIGN_CHANNEL = 0x8, |
| WMI_SCAN_EVENT_DEQUEUED = 0x10, /* scan request got dequeued */ |
| WMI_SCAN_EVENT_PREEMPTED = 0x20, /* preempted by other high priority scan */ |
| WMI_SCAN_EVENT_START_FAILED = 0x40, /* scan start failed */ |
| WMI_SCAN_EVENT_RESTARTED = 0x80, /* scan restarted */ |
| WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = 0x100, |
| WMI_SCAN_EVENT_SUSPENDED = 0x200, /* scan request is suspended */ |
| WMI_SCAN_EVENT_RESUMED = 0x400, /* scan request is resumed */ |
| WMI_SCAN_EVENT_MAX = 0x8000 |
| }; |
| |
| enum wmi_scan_completion_reason { |
| /** scan related events */ |
| WMI_SCAN_REASON_NONE = 0xFF, |
| WMI_SCAN_REASON_COMPLETED = 0, |
| WMI_SCAN_REASON_CANCELLED = 1, |
| WMI_SCAN_REASON_PREEMPTED = 2, |
| WMI_SCAN_REASON_TIMEDOUT = 3, |
| WMI_SCAN_REASON_INTERNAL_FAILURE = 4, /* This reason indication failures when performaing scan */ |
| WMI_SCAN_REASON_SUSPENDED = 5, |
| WMI_SCAN_REASON_MAX, |
| }; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_scan_event_fixed_param */ |
| /** scan event (wmi_scan_event_type) */ |
| A_UINT32 event; |
| /** status of the scan completion event */ |
| A_UINT32 reason; |
| /** channel freq , only valid for FOREIGN channel event*/ |
| A_UINT32 channel_freq; |
| /**id of the requestor whose scan is in progress */ |
| A_UINT32 requestor; |
| /**id of the scan that is in progress */ |
| A_UINT32 scan_id; |
| /**id of VDEV that requested the scan */ |
| A_UINT32 vdev_id; |
| } wmi_scan_event_fixed_param; |
| |
| /* WMI Diag event */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag is WMITLV_TAG_STRUC_wmi_diag_event_fixed_param */ |
| A_UINT32 time_stamp; /* Reference timestamp. diag frame contains diff value */ |
| A_UINT32 count; /* Number of diag frames added to current event */ |
| A_UINT32 dropped; |
| /* followed by WMITLV_TAG_ARRAY_BYTE */ |
| } wmi_diag_event_fixed_param; |
| |
| /* |
| * If FW has multiple active channels due to MCC(multi channel concurrency), |
| * then these stats are combined stats for all the active channels. |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_update_whal_mib_stats_event_fixed_param */ |
| /** ack count, it is an incremental number, not accumulated number */ |
| A_UINT32 ackRcvBad; |
| /** bad rts count, it is an incremental number, not accumulated number */ |
| A_UINT32 rtsBad; |
| /** good rts, it is an incremental number, not accumulated number */ |
| A_UINT32 rtsGood; |
| /** fcs count, it is an incremental number, not accumulated number */ |
| A_UINT32 fcsBad; |
| /** beacon count, it is an incremental number, not accumulated number */ |
| A_UINT32 noBeacons; |
| } wmi_update_whal_mib_stats_event_fixed_param; |
| |
| /* |
| * This defines how much headroom is kept in the |
| * receive frame between the descriptor and the |
| * payload, in order for the WMI PHY error and |
| * management handler to insert header contents. |
| * |
| * This is in bytes. |
| */ |
| #define WMI_MGMT_RX_HDR_HEADROOM sizeof(wmi_comb_phyerr_rx_hdr) + WMI_TLV_HDR_SIZE + sizeof(wmi_single_phyerr_rx_hdr) |
| |
| /** This event will be used for sending scan results |
| * as well as rx mgmt frames to the host. The rx buffer |
| * will be sent as part of this WMI event. It would be a |
| * good idea to pass all the fields in the RX status |
| * descriptor up to the host. |
| */ |
| /* ATH_MAX_ANTENNA value (4) can't be changed without breaking the compatibility */ |
| #define ATH_MAX_ANTENNA 4 /* To support beelinear, which is up to 4 chains */ |
| |
| /** flag indicating that the the mgmt frame (probe req/beacon) is received in the context of extscan performed by FW */ |
| #define WMI_MGMT_RX_HDR_EXTSCAN 0x01 |
| |
| /** |
| * flag indicating that the the mgmt frame (probe req/beacon) is received in |
| * the context of matched network by FW ENLO |
| */ |
| #define WMI_MGMT_RX_HDR_ENLO 0x02 |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_mgmt_rx_hdr */ |
| /** channel on which this frame is received. */ |
| A_UINT32 channel; |
| /** snr information used to cal rssi */ |
| A_UINT32 snr; |
| /** Rate kbps */ |
| A_UINT32 rate; |
| /** rx phy mode WLAN_PHY_MODE */ |
| A_UINT32 phy_mode; |
| /** length of the frame */ |
| A_UINT32 buf_len; |
| /** rx status */ |
| A_UINT32 status; |
| /** RSSI of PRI 20MHz for each chain. */ |
| A_UINT32 rssi_ctl[ATH_MAX_ANTENNA]; |
| /** information about the management frame e.g. can give a scan source for a scan result mgmt frame */ |
| A_UINT32 flags; |
| /** combined RSSI, i.e. the sum of the snr + noise floor (dBm units) */ |
| A_INT32 rssi; |
| |
| /** delta between local TSF(TSF timestamp when frame was RXd) |
| * and remote TSF(TSF timestamp in the IE for mgmt frame |
| * beacon,proberesp for e.g). If remote TSF is not available, |
| * delta set to 0. |
| * Although tsf_delta is stored as A_UINT32, it can be negative, |
| * and thus would need to be sign-extended if added to a value |
| * larger than 32 bits. |
| */ |
| A_UINT32 tsf_delta; |
| /* This TLV is followed by array of bytes: |
| * // management frame buffer |
| * A_UINT8 bufp[]; |
| */ |
| } wmi_mgmt_rx_hdr; |
| |
| /* WMI PHY Error RX */ |
| |
| typedef struct { |
| /** TSF timestamp */ |
| A_UINT32 tsf_timestamp; |
| |
| /** |
| * Current freq1, freq2 |
| * |
| * [7:0]: freq1[lo] |
| * [15:8] : freq1[hi] |
| * [23:16]: freq2[lo] |
| * [31:24]: freq2[hi] |
| */ |
| A_UINT32 freq_info_1; |
| |
| /** |
| * Combined RSSI over all chains and channel width for this PHY error |
| * |
| * [7:0]: RSSI combined |
| * [15:8]: Channel width (MHz) |
| * [23:16]: PHY error code |
| * [24:16]: reserved (future use) |
| */ |
| A_UINT32 freq_info_2; |
| |
| /** |
| * RSSI on chain 0 through 3 |
| * |
| * This is formatted the same as the PPDU_START RX descriptor |
| * field: |
| * |
| * [7:0]: pri20 |
| * [15:8]: sec20 |
| * [23:16]: sec40 |
| * [31:24]: sec80 |
| */ |
| A_UINT32 rssi_chain0; |
| A_UINT32 rssi_chain1; |
| A_UINT32 rssi_chain2; |
| A_UINT32 rssi_chain3; |
| |
| /** |
| * Last calibrated NF value for chain 0 through 3 |
| * |
| * nf_list_1: |
| * |
| * + [15:0] - chain 0 |
| * + [31:16] - chain 1 |
| * |
| * nf_list_2: |
| * |
| * + [15:0] - chain 2 |
| * + [31:16] - chain 3 |
| */ |
| A_UINT32 nf_list_1; |
| A_UINT32 nf_list_2; |
| |
| /** Length of the frame */ |
| A_UINT32 buf_len; |
| } wmi_single_phyerr_rx_hdr; |
| |
| #define WMI_UNIFIED_FREQINFO_1_LO 0x000000ff |
| #define WMI_UNIFIED_FREQINFO_1_LO_S 0 |
| #define WMI_UNIFIED_FREQINFO_1_HI 0x0000ff00 |
| #define WMI_UNIFIED_FREQINFO_1_HI_S 8 |
| #define WMI_UNIFIED_FREQINFO_2_LO 0x00ff0000 |
| #define WMI_UNIFIED_FREQINFO_2_LO_S 16 |
| #define WMI_UNIFIED_FREQINFO_2_HI 0xff000000 |
| #define WMI_UNIFIED_FREQINFO_2_HI_S 24 |
| |
| /* |
| * Please keep in mind that these _SET macros break macro side effect |
| * assumptions; don't be clever with them. |
| */ |
| #define WMI_UNIFIED_FREQ_INFO_GET(hdr, f) \ |
| (WMI_F_MS((hdr)->freq_info_1, \ |
| WMI_UNIFIED_FREQINFO_ ## f ## _LO) \ |
| | (WMI_F_MS((hdr)->freq_info_1, \ |
| WMI_UNIFIED_FREQINFO_ ## f ## _HI) << 8)) |
| |
| #define WMI_UNIFIED_FREQ_INFO_SET(hdr, f, v) \ |
| do { \ |
| WMI_F_RMW((hdr)->freq_info_1, (v) & 0xff, \ |
| WMI_UNIFIED_FREQINFO_ ## f ## _LO); \ |
| WMI_F_RMW((hdr)->freq_info_1, ((v) >> 8) & 0xff, \ |
| WMI_UNIFIED_FREQINFO_ ## f ## _HI); \ |
| } while (0) |
| |
| #define WMI_UNIFIED_FREQINFO_2_RSSI_COMB 0x000000ff |
| #define WMI_UNIFIED_FREQINFO_2_RSSI_COMB_S 0 |
| #define WMI_UNIFIED_FREQINFO_2_CHWIDTH 0x0000ff00 |
| #define WMI_UNIFIED_FREQINFO_2_CHWIDTH_S 8 |
| #define WMI_UNIFIED_FREQINFO_2_PHYERRCODE 0x00ff0000 |
| #define WMI_UNIFIED_FREQINFO_2_PHYERRCODE_S 16 |
| |
| #define WMI_UNIFIED_RSSI_COMB_GET(hdr) \ |
| ((int8_t) (WMI_F_MS((hdr)->freq_info_2, \ |
| WMI_UNIFIED_FREQINFO_2_RSSI_COMB))) |
| |
| #define WMI_UNIFIED_RSSI_COMB_SET(hdr, v) \ |
| WMI_F_RMW((hdr)->freq_info_2, (v) & 0xff, \ |
| WMI_UNIFIED_FREQINFO_2_RSSI_COMB); |
| |
| #define WMI_UNIFIED_CHWIDTH_GET(hdr) \ |
| WMI_F_MS((hdr)->freq_info_2, WMI_UNIFIED_FREQINFO_2_CHWIDTH) |
| |
| #define WMI_UNIFIED_CHWIDTH_SET(hdr, v) \ |
| WMI_F_RMW((hdr)->freq_info_2, (v) & 0xff, \ |
| WMI_UNIFIED_FREQINFO_2_CHWIDTH); |
| |
| #define WMI_UNIFIED_PHYERRCODE_GET(hdr) \ |
| WMI_F_MS((hdr)->freq_info_2, WMI_UNIFIED_FREQINFO_2_PHYERRCODE) |
| |
| #define WMI_UNIFIED_PHYERRCODE_SET(hdr, v) \ |
| WMI_F_RMW((hdr)->freq_info_2, (v) & 0xff, \ |
| WMI_UNIFIED_FREQINFO_2_PHYERRCODE); |
| |
| #define WMI_UNIFIED_CHAIN_0 0x0000ffff |
| #define WMI_UNIFIED_CHAIN_0_S 0 |
| #define WMI_UNIFIED_CHAIN_1 0xffff0000 |
| #define WMI_UNIFIED_CHAIN_1_S 16 |
| #define WMI_UNIFIED_CHAIN_2 0x0000ffff |
| #define WMI_UNIFIED_CHAIN_2_S 0 |
| #define WMI_UNIFIED_CHAIN_3 0xffff0000 |
| #define WMI_UNIFIED_CHAIN_3_S 16 |
| |
| #define WMI_UNIFIED_CHAIN_0_FIELD nf_list_1 |
| #define WMI_UNIFIED_CHAIN_1_FIELD nf_list_1 |
| #define WMI_UNIFIED_CHAIN_2_FIELD nf_list_2 |
| #define WMI_UNIFIED_CHAIN_3_FIELD nf_list_2 |
| |
| #define WMI_UNIFIED_NF_CHAIN_GET(hdr, c) \ |
| ((int16_t) (WMI_F_MS((hdr)->WMI_UNIFIED_CHAIN_ ## c ## _FIELD, \ |
| WMI_UNIFIED_CHAIN_ ## c))) |
| |
| #define WMI_UNIFIED_NF_CHAIN_SET(hdr, c, nf) \ |
| WMI_F_RMW((hdr)->WMI_UNIFIED_CHAIN_ ## c ## _FIELD, (nf) & 0xffff, \ |
| WMI_UNIFIED_CHAIN_ ## c); |
| |
| /* |
| * For now, this matches what the underlying hardware is doing. |
| * Update ar6000ProcRxDesc() to use these macros when populating |
| * the rx descriptor and then we can just copy the field over |
| * to the WMI PHY notification without worrying about breaking |
| * things. |
| */ |
| #define WMI_UNIFIED_RSSI_CHAN_PRI20 0x000000ff |
| #define WMI_UNIFIED_RSSI_CHAN_PRI20_S 0 |
| #define WMI_UNIFIED_RSSI_CHAN_SEC20 0x0000ff00 |
| #define WMI_UNIFIED_RSSI_CHAN_SEC20_S 8 |
| #define WMI_UNIFIED_RSSI_CHAN_SEC40 0x00ff0000 |
| #define WMI_UNIFIED_RSSI_CHAN_SEC40_S 16 |
| #define WMI_UNIFIED_RSSI_CHAN_SEC80 0xff000000 |
| #define WMI_UNIFIED_RSSI_CHAN_SEC80_S 24 |
| |
| #define WMI_UNIFIED_RSSI_CHAN_SET(hdr, c, ch, rssi) \ |
| WMI_F_RMW((hdr)->rssi_chain ## c, (rssi) & 0xff, \ |
| WMI_UNIFIED_RSSI_CHAN_ ## ch); |
| |
| #define WMI_UNIFIED_RSSI_CHAN_GET(hdr, c, ch) \ |
| ((int8_t) (WMI_F_MS((hdr)->rssi_chain ## c, \ |
| WMI_UNIFIED_RSSI_CHAN_ ## ch))) |
| |
| typedef struct { |
| /** Phy error event header */ |
| wmi_single_phyerr_rx_hdr hdr; |
| /** frame buffer */ |
| A_UINT8 bufp[1]; |
| } wmi_single_phyerr_rx_event; |
| |
| /* PHY ERROR MASK 0 */ |
| /* bits 1:0 defined but not published */ |
| #define WMI_PHY_ERROR_MASK0_RADAR (1<<2) |
| /* bits 23:3 defined but not published */ |
| #define WMI_PHY_ERROR_MASK0_FALSE_RADAR_EXT (1<<24) |
| /* bits 25:24 defined but not published */ |
| #define WMI_PHY_ERROR_MASK0_SPECTRAL_SCAN (1<<26) |
| /* bits 31:27 defined but not published */ |
| |
| /* PHY ERROR MASK 1 |
| * bits 13:0 defined but not published |
| * bits 31:14 reserved |
| */ |
| |
| /* PHY ERROR MASK 2 |
| * bits 31:0 reserved |
| */ |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_comb_phyerr_rx_hdr |
| */ |
| A_UINT32 tlv_header; |
| /** Phy error phy error count */ |
| A_UINT32 num_phyerr_events; |
| A_UINT32 tsf_l32; |
| A_UINT32 tsf_u32; |
| A_UINT32 buf_len; |
| union { |
| /* OBSOLETE - will be removed once all refs are gone */ |
| A_UINT32 pmac_id; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| }; |
| A_UINT32 rsPhyErrMask0; /* see WMI_PHY_ERROR_MASK0 */ |
| A_UINT32 rsPhyErrMask1; /* see WMI_PHY_ERROR_MASK1 */ |
| A_UINT32 rsPhyErrMask2; /* see WMI_PHY_ERROR_MASK2 */ |
| |
| /* This TLV is followed by array of bytes: |
| * // frame buffer - contains multiple payloads in the order: |
| * // header - payload, header - payload... |
| * (The header is of type: wmi_single_phyerr_rx_hdr) |
| * A_UINT8 bufp[]; |
| */ |
| } wmi_comb_phyerr_rx_hdr; |
| |
| /* WMI MGMT TX */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_mgmt_tx_hdr */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** xmit rate */ |
| A_UINT32 tx_rate; |
| /** xmit power */ |
| A_UINT32 tx_power; |
| /** Buffer length in bytes */ |
| A_UINT32 buf_len; |
| /* This TLV is followed by array of bytes: |
| * // management frame buffer |
| * A_UINT8 bufp[]; |
| */ |
| } wmi_mgmt_tx_hdr; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; |
| * tag equals WMITLV_TAG_STRUC_wmi_mgmt_tx_send_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| /* echoed in tx_compl_event */ |
| A_UINT32 desc_id; |
| /* MHz units */ |
| A_UINT32 chanfreq; |
| A_UINT32 paddr_lo; |
| A_UINT32 paddr_hi; |
| A_UINT32 frame_len; |
| /* Buffer length in bytes */ |
| A_UINT32 buf_len; |
| /* |
| * This TLV is followed by array of bytes: |
| * First 64 bytes of management frame |
| * A_UINT8 bufp[]; |
| */ |
| } wmi_mgmt_tx_send_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_echo_event_fixed_param */ |
| A_UINT32 value; |
| } wmi_echo_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_echo_cmd_fixed_param */ |
| A_UINT32 value; |
| } wmi_echo_cmd_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_set_regdomain_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| /** reg domain code */ |
| A_UINT32 reg_domain; |
| A_UINT32 reg_domain_2G; |
| A_UINT32 reg_domain_5G; |
| A_UINT32 conformance_test_limit_2G; |
| A_UINT32 conformance_test_limit_5G; |
| A_UINT32 dfs_domain; |
| } wmi_pdev_set_regdomain_cmd_fixed_param; |
| |
| typedef struct { |
| /** true for scan start and flase for scan end */ |
| A_UINT32 scan_start; |
| } wmi_pdev_scan_cmd; |
| |
| /* WMI support for setting ratemask in target */ |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_vdev_config_ratemask_fixed_param |
| */ |
| A_UINT32 vdev_id; |
| /* |
| * 0 - cck/ofdm |
| * 1 - HT |
| * 2 - VHT */ |
| A_UINT32 type; |
| |
| A_UINT32 mask_lower32; |
| A_UINT32 mask_higher32; |
| } wmi_vdev_config_ratemask_cmd_fixed_param; |
| |
| /* nrp action - Filter Neighbor Rx Packets - add/remove filter */ |
| enum { |
| WMI_FILTER_NRP_ACTION_ADD = 0x1, |
| WMI_FILTER_NRP_ACTION_REMOVE = 0x2, |
| WMI_FILTER_NRP_ACTION_GET_LIST = 0x3, |
| }; /* nrp - Neighbor Rx Packets */ |
| |
| /* nrp type - Filter Neighbor Rx Packets - ap/client addr */ |
| enum { |
| WMI_FILTER_NRP_TYPE_AP_BSSID = 0x1, |
| WMI_FILTER_NRP_TYPE_STA_MACADDR = 0x2, |
| }; |
| |
| /* nrp flag - Filter Neighbor Rx Packets |
| * (capture flag, 2 & 3 not initially supported) |
| */ |
| enum { |
| WMI_FILTER_NRP_CAPTURE_ONLY_RX_PACKETS = 0x1, |
| WMI_FILTER_NRP_CAPTURE_ONLY_TX_PACKETS = 0x2, |
| WMI_FILTER_NRP_CAPTURE_BOTH_TXRX_PACKETS = 0x3, |
| }; |
| |
| /* Filter for Neighbor Rx Packets */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_vdev_filter_nrp_config_cmd_fixed_param |
| */ |
| A_UINT32 vdev_id; |
| /* AP Bssid or Client Mac-addr */ |
| wmi_mac_addr addr; |
| /* Add/Remove NRF Filter */ |
| A_UINT32 action; /* WMI_FILTER_NRP_ACTION enum */ |
| /* client/ap filter */ |
| A_UINT32 type; /* WMI_FILTER_NRP_TYPE enum */ |
| /* optional - tx/rx capture */ |
| A_UINT32 flag; /* WMI_FILTER_NRP_CAPTURE enum */ |
| /* BSSID index - index of the BSSID register */ |
| A_UINT32 bssid_idx; |
| } wmi_vdev_filter_nrp_config_cmd_fixed_param; |
| |
| /*Command to set/unset chip in quiet mode*/ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_quiet_cmd_fixed_param */ |
| A_UINT32 reserved0; |
| /** placeholder for pdev_id of future multiple MAC products. Init. to 0. */ |
| A_UINT32 period; /*period in TUs */ |
| A_UINT32 duration; /*duration in TUs */ |
| A_UINT32 next_start; /*offset in TUs */ |
| A_UINT32 enabled; /*enable/disable */ |
| } wmi_pdev_set_quiet_cmd_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_vdev_set_quiet_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; /* Virtual interface ID */ |
| A_UINT32 period; /* period in TUs */ |
| A_UINT32 duration; /* duration in TUs */ |
| A_UINT32 next_start; /* offset in TUs */ |
| A_UINT32 enabled; /* enable/disable */ |
| } wmi_vdev_set_quiet_cmd_fixed_param; |
| |
| /* |
| * Command to enable/disable Green AP Power Save. |
| * This helps conserve power during AP operation. When the AP has no |
| * stations associated with it, the host can enable Green AP Power Save |
| * to request the firmware to shut down all but one transmit and receive |
| * chains. |
| */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_green_ap_ps_enable_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| A_UINT32 enable; /*1:enable, 0:disable */ |
| } wmi_pdev_green_ap_ps_enable_cmd_fixed_param; |
| |
| #define MAX_HT_IE_LEN 32 |
| /* DEPRECATED */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_ht_ie_cmd_fixed_param */ |
| A_UINT32 reserved0; |
| /** placeholder for pdev_id of future multiple MAC products. Init. to 0. */ |
| A_UINT32 ie_len; /*length of the ht ie in the TLV ie_data[] */ |
| A_UINT32 tx_streams; /* Tx streams supported for this HT IE */ |
| A_UINT32 rx_streams; /* Rx streams supported for this HT IE */ |
| /** The TLV for the HT IE follows: |
| * A_UINT32 ie_data[]; |
| */ |
| } wmi_pdev_set_ht_ie_cmd_fixed_param; |
| |
| #define MAX_VHT_IE_LEN 32 |
| /* DEPRECATED */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_vht_ie_cmd_fixed_param */ |
| A_UINT32 reserved0; |
| /** placeholder for pdev_id of future multiple MAC products. Init. to 0. */ |
| A_UINT32 ie_len; /*length of the vht ie in the TLV ie_data[] */ |
| A_UINT32 tx_streams; /* Tx streams supported for this HT IE */ |
| A_UINT32 rx_streams; /* Rx streams supported for this HT IE */ |
| /** The TLV for the VHT IE follows: |
| * A_UINT32 ie_data[]; |
| */ |
| } wmi_pdev_set_vht_ie_cmd_fixed_param; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_set_base_macaddr_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| wmi_mac_addr base_macaddr; |
| } wmi_pdev_set_base_macaddr_cmd_fixed_param; |
| |
| /* |
| * For now, the spectral configuration is global rather than |
| * per-vdev. The vdev is a placeholder and will be ignored |
| * by the firmware. |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_spectral_configure_cmd_fixed_param */ |
| A_UINT32 vdev_id; |
| A_UINT32 spectral_scan_count; |
| A_UINT32 spectral_scan_period; |
| A_UINT32 spectral_scan_priority; |
| A_UINT32 spectral_scan_fft_size; |
| A_UINT32 spectral_scan_gc_ena; |
| A_UINT32 spectral_scan_restart_ena; |
| A_UINT32 spectral_scan_noise_floor_ref; |
| A_UINT32 spectral_scan_init_delay; |
| A_UINT32 spectral_scan_nb_tone_thr; |
| A_UINT32 spectral_scan_str_bin_thr; |
| A_UINT32 spectral_scan_wb_rpt_mode; |
| A_UINT32 spectral_scan_rssi_rpt_mode; |
| A_UINT32 spectral_scan_rssi_thr; |
| A_UINT32 spectral_scan_pwr_format; |
| A_UINT32 spectral_scan_rpt_mode; |
| A_UINT32 spectral_scan_bin_scale; |
| A_UINT32 spectral_scan_dBm_adj; |
| A_UINT32 spectral_scan_chn_mask; |
| } wmi_vdev_spectral_configure_cmd_fixed_param; |
| |
| /* |
| * Enabling, disabling and triggering the spectral scan |
| * is a per-vdev operation. That is, it will set channel |
| * flags per vdev rather than globally; so concurrent scan/run |
| * and multiple STA (eg p2p, tdls, multi-band STA) is possible. |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_spectral_enable_cmd_fixed_param */ |
| A_UINT32 vdev_id; |
| /* 0 - ignore; 1 - trigger, 2 - clear trigger */ |
| A_UINT32 trigger_cmd; |
| /* 0 - ignore; 1 - enable, 2 - disable */ |
| A_UINT32 enable_cmd; |
| } wmi_vdev_spectral_enable_cmd_fixed_param; |
| |
| typedef enum { |
| WMI_CSA_IE_PRESENT = 0x00000001, |
| WMI_XCSA_IE_PRESENT = 0x00000002, |
| WMI_WBW_IE_PRESENT = 0x00000004, |
| WMI_CSWARP_IE_PRESENT = 0x00000008, |
| } WMI_CSA_EVENT_IES_PRESENT_FLAG; |
| |
| /* wmi CSA receive event from beacon frame */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_csa_event_fixed_param */ |
| A_UINT32 i_fc_dur; |
| /* Bit 0-15: FC */ |
| /* Bit 16-31: DUR */ |
| wmi_mac_addr i_addr1; |
| wmi_mac_addr i_addr2; |
| /* NOTE: size of array of csa_ie[], xcsa_ie[], and wb_ie[] cannot be |
| * changed in the future without breaking WMI compatibility */ |
| A_UINT32 csa_ie[2]; |
| A_UINT32 xcsa_ie[2]; |
| A_UINT32 wb_ie[2]; |
| A_UINT32 cswarp_ie; |
| A_UINT32 ies_present_flag; /* WMI_CSA_EVENT_IES_PRESENT_FLAG */ |
| } wmi_csa_event_fixed_param; |
| |
| typedef enum { |
| WAL_PEER_MCAST2UCAST_DISABLED = 0, |
| /* Drop the frames if match is not found */ |
| WAL_PEER_MCAST2UCAST_DROP_EMPTY = 1, |
| /* Send as mcast if match is not found */ |
| WAL_PEER_MCAST2UCAST_MCAST_EMPTY = 2, |
| } WMI_PEER_MCAST2UCAST_MODE; |
| |
| typedef enum { |
| /** TX chain mask */ |
| WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, |
| /** RX chain mask */ |
| WMI_PDEV_PARAM_RX_CHAIN_MASK, |
| /** TX power limit for 2G Radio */ |
| WMI_PDEV_PARAM_TXPOWER_LIMIT2G, |
| /** TX power limit for 5G Radio */ |
| WMI_PDEV_PARAM_TXPOWER_LIMIT5G, |
| /** TX power scale */ |
| WMI_PDEV_PARAM_TXPOWER_SCALE, |
| /** Beacon generation mode . 0: host, 1: target */ |
| WMI_PDEV_PARAM_BEACON_GEN_MODE, |
| /** Beacon generation mode . 0: staggered 1: bursted */ |
| WMI_PDEV_PARAM_BEACON_TX_MODE, |
| /** Resource manager off chan mode . |
| * 0: turn off off chan mode. 1: turn on offchan mode |
| */ |
| WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, |
| /** Protection mode 0: no protection 1:use CTS-to-self 2: use RTS/CTS */ |
| WMI_PDEV_PARAM_PROTECTION_MODE, |
| /** Dynamic bandwidth 0: disable 1: enable */ |
| WMI_PDEV_PARAM_DYNAMIC_BW, |
| /** Non aggregrate/ 11g sw retry threshold.0-disable */ |
| WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, |
| /** aggregrate sw retry threshold. 0-disable*/ |
| WMI_PDEV_PARAM_AGG_SW_RETRY_TH, |
| /** Station kickout threshold (non of consecutive failures).0-disable */ |
| WMI_PDEV_PARAM_STA_KICKOUT_TH, |
| /** Aggerate size scaling configuration per AC */ |
| WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, |
| /** LTR enable */ |
| WMI_PDEV_PARAM_LTR_ENABLE, |
| /** LTR latency for BE, in us */ |
| WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, |
| /** LTR latency for BK, in us */ |
| WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, |
| /** LTR latency for VI, in us */ |
| WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, |
| /** LTR latency for VO, in us */ |
| WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, |
| /** LTR AC latency timeout, in ms */ |
| WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, |
| /** LTR platform latency override, in us */ |
| WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, |
| /** LTR-M override, in us */ |
| WMI_PDEV_PARAM_LTR_RX_OVERRIDE, |
| /** Tx activity timeout for LTR, in us */ |
| WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, |
| /** L1SS state machine enable */ |
| WMI_PDEV_PARAM_L1SS_ENABLE, |
| /** Deep sleep state machine enable */ |
| WMI_PDEV_PARAM_DSLEEP_ENABLE, |
| /** RX buffering flush enable */ |
| WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, |
| /** RX buffering matermark */ |
| WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, |
| /** RX buffering timeout enable */ |
| WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, |
| /** RX buffering timeout value */ |
| WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, |
| /** pdev level stats update period in ms */ |
| WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, |
| /** vdev level stats update period in ms */ |
| WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, |
| /** peer level stats update period in ms */ |
| WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, |
| /** beacon filter status update period */ |
| WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, |
| /** QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ |
| WMI_PDEV_PARAM_PMF_QOS, |
| /** Access category on which ARP frames are sent */ |
| WMI_PDEV_PARAM_ARP_AC_OVERRIDE, |
| /** DCS configuration */ |
| WMI_PDEV_PARAM_DCS, |
| /** Enable/Disable ANI on target */ |
| WMI_PDEV_PARAM_ANI_ENABLE, |
| /** configure the ANI polling period */ |
| WMI_PDEV_PARAM_ANI_POLL_PERIOD, |
| /** configure the ANI listening period */ |
| WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, |
| /** configure OFDM immunity level */ |
| WMI_PDEV_PARAM_ANI_OFDM_LEVEL, |
| /** configure CCK immunity level */ |
| WMI_PDEV_PARAM_ANI_CCK_LEVEL, |
| /** Enable/Disable CDD for 1x1 STAs in rate control module */ |
| WMI_PDEV_PARAM_DYNTXCHAIN, |
| /** Enable/Disable proxy STA */ |
| WMI_PDEV_PARAM_PROXY_STA, |
| /** Enable/Disable low power state when all VDEVs are inactive/idle. */ |
| WMI_PDEV_PARAM_IDLE_PS_CONFIG, |
| /** Enable/Disable power gating sleep */ |
| WMI_PDEV_PARAM_POWER_GATING_SLEEP, |
| /** Enable/Disable Rfkill */ |
| WMI_PDEV_PARAM_RFKILL_ENABLE, |
| /** Set Bursting DUR */ |
| WMI_PDEV_PARAM_BURST_DUR, |
| /** Set Bursting ENABLE */ |
| WMI_PDEV_PARAM_BURST_ENABLE, |
| /** HW rfkill config */ |
| WMI_PDEV_PARAM_HW_RFKILL_CONFIG, |
| /** Enable radio low power features */ |
| WMI_PDEV_PARAM_LOW_POWER_RF_ENABLE, |
| /** L1SS entry and residency time track */ |
| WMI_PDEV_PARAM_L1SS_TRACK, |
| /** set hyst at runtime, requirement from SS */ |
| WMI_PDEV_PARAM_HYST_EN, |
| /** Enable/ Disable POWER COLLAPSE */ |
| WMI_PDEV_PARAM_POWER_COLLAPSE_ENABLE, |
| /** configure LED system state */ |
| WMI_PDEV_PARAM_LED_SYS_STATE, |
| /** Enable/Disable LED */ |
| WMI_PDEV_PARAM_LED_ENABLE, |
| /** set DIRECT AUDIO time latency */ |
| WMI_PDEV_PARAM_AUDIO_OVER_WLAN_LATENCY, /* DEPRECATED */ |
| /** set DIRECT AUDIO Feature ENABLE */ |
| WMI_PDEV_PARAM_AUDIO_OVER_WLAN_ENABLE, /* DEPRECATED */ |
| /** pdev level whal mib stats update enable */ |
| WMI_PDEV_PARAM_WHAL_MIB_STATS_UPDATE_ENABLE, |
| /** ht/vht info based on vdev */ |
| WMI_PDEV_PARAM_VDEV_RATE_STATS_UPDATE_PERIOD, |
| /** Set CTS channel BW for dynamic BW adjustment feature */ |
| WMI_PDEV_PARAM_CTS_CBW, |
| /** Set GPIO pin info used by WNTS */ |
| WMI_PDEV_PARAM_WNTS_CONFIG, |
| /** Enable/Disable hardware adaptive early rx feature */ |
| WMI_PDEV_PARAM_ADAPTIVE_EARLY_RX_ENABLE, |
| /** The minimum early rx duration, to ensure early rx duration is non-zero */ |
| WMI_PDEV_PARAM_ADAPTIVE_EARLY_RX_MIN_SLEEP_SLOP, |
| /** Increasing/decreasing step used by hardware */ |
| WMI_PDEV_PARAM_ADAPTIVE_EARLY_RX_INC_DEC_STEP, |
| /** The fixed early rx duration when adaptive early rx is disabled */ |
| WMI_PDEV_PARAM_EARLY_RX_FIX_SLEEP_SLOP, |
| /** Enable/Disable bmiss based adaptive beacon timeout feature */ |
| WMI_PDEV_PARAM_BMISS_BASED_ADAPTIVE_BTO_ENABLE, |
| /* |
| * The minimum beacon timeout duration, to ensure beacon timeout |
| * duration is non-zero |
| */ |
| WMI_PDEV_PARAM_BMISS_BTO_MIN_BCN_TIMEOUT, |
| /** Increasing/decreasing step used by hardware */ |
| WMI_PDEV_PARAM_BMISS_BTO_INC_DEC_STEP, |
| /* |
| * The fixed beacon timeout duration when bmiss based adaptive beacon |
| * timeout is disabled |
| */ |
| WMI_PDEV_PARAM_BTO_FIX_BCN_TIMEOUT, |
| /* |
| * Enable/Disable Congestion Estimator based adaptive beacon |
| * timeout feature */ |
| WMI_PDEV_PARAM_CE_BASED_ADAPTIVE_BTO_ENABLE, |
| /* |
| * combo value of ce_id, ce_threshold, ce_time, refer |
| * to WMI_CE_BTO_CE_ID_MASK |
| */ |
| WMI_PDEV_PARAM_CE_BTO_COMBO_CE_VALUE, |
| /** 2G TX chain mask */ |
| WMI_PDEV_PARAM_TX_CHAIN_MASK_2G, |
| /** 2G RX chain mask */ |
| WMI_PDEV_PARAM_RX_CHAIN_MASK_2G, |
| /** 5G TX chain mask */ |
| WMI_PDEV_PARAM_TX_CHAIN_MASK_5G, |
| /** 5G RX chain mask */ |
| WMI_PDEV_PARAM_RX_CHAIN_MASK_5G, |
| /* Set tx chain mask for CCK rates */ |
| WMI_PDEV_PARAM_TX_CHAIN_MASK_CCK, |
| /* Set tx chain mask for 1SS stream */ |
| WMI_PDEV_PARAM_TX_CHAIN_MASK_1SS, |
| /* Enable/Disable CTS2Self for P2P GO when Non-P2P Client is connected*/ |
| WMI_PDEV_PARAM_CTS2SELF_FOR_P2P_GO_CONFIG, |
| /* TX power backoff in dB: tx power -= param value |
| * Host passes values(DB) to Halphy, Halphy reduces the power table by |
| * the values. Safety check will happen in Halphy |
| */ |
| WMI_PDEV_PARAM_TXPOWER_DECR_DB, |
| /** enable and disable aggregate burst along with duration */ |
| WMI_PDEV_PARAM_AGGR_BURST, |
| /** Set the global RX decap mode */ |
| WMI_PDEV_PARAM_RX_DECAP_MODE, |
| /** Enable/Disable Fast channel reset */ |
| WMI_PDEV_PARAM_FAST_CHANNEL_RESET, |
| /** Default antenna for Smart antenna */ |
| WMI_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, |
| /** Set the user-specified antenna gain */ |
| WMI_PDEV_PARAM_ANTENNA_GAIN, |
| /** Set the user-specified RX filter */ |
| WMI_PDEV_PARAM_RX_FILTER, |
| /* |
| * configure the user-specified MCAST tid for managed mcast feature |
| * 0-15 is the valid range. 0xff will clear the tid setting |
| */ |
| WMI_PDEV_SET_MCAST_TO_UCAST_TID, |
| /** Enable/Disable Proxy sta mode */ |
| WMI_PDEV_PARAM_PROXY_STA_MODE, |
| /* |
| * configure the mcast2ucast mode for the pdev->peer_mcast. |
| * See WMI_PEER_MCAST2UCAST_MODE for possible values |
| */ |
| WMI_PDEV_PARAM_SET_MCAST2UCAST_MODE, |
| /** Sets the Mcast buffers for cloning, to support Mcast enhancement */ |
| WMI_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, |
| /** Remove the Mcast buffers added by host */ |
| WMI_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, |
| /** En/disable station power save state indication */ |
| WMI_PDEV_PEER_STA_PS_STATECHG_ENABLE, |
| /** Access category on which ARP frames are sent */ |
| WMI_PDEV_PARAM_IGMPMLD_AC_OVERRIDE, |
| /** allow or disallow interbss frame forwarding */ |
| WMI_PDEV_PARAM_BLOCK_INTERBSS, |
| /** Enable/Disable reset */ |
| WMI_PDEV_PARAM_SET_DISABLE_RESET_CMDID, |
| /** Enable/Disable/Set MSDU_TTL in milliseconds. */ |
| WMI_PDEV_PARAM_SET_MSDU_TTL_CMDID, |
| /** Set global PPDU duration limit (usec). */ |
| WMI_PDEV_PARAM_SET_PPDU_DURATION_CMDID, |
| /** set txbf sounding period of vap in milliseconds */ |
| WMI_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID, |
| /** Set promiscuous mode */ |
| WMI_PDEV_PARAM_SET_PROMISC_MODE_CMDID, |
| /** Set burst mode */ |
| WMI_PDEV_PARAM_SET_BURST_MODE_CMDID, |
| /** enable enhanced stats */ |
| WMI_PDEV_PARAM_EN_STATS, |
| /** Set mu-grouping policy */ |
| WMI_PDEV_PARAM_MU_GROUP_POLICY, |
| /** Channel Hopping Enable */ |
| WMI_PDEV_PARAM_NOISE_DETECTION, |
| /** Set Channel Hopping NF threshold in dBm */ |
| WMI_PDEV_PARAM_NOISE_THRESHOLD, |
| /** Set PAPRD policy */ |
| WMI_PDEV_PARAM_DPD_ENABLE, |
| /** Enable/disable mcast/bcast echo, used by ProxySTA */ |
| WMI_PDEV_PARAM_SET_MCAST_BCAST_ECHO, |
| /** ATF enable/disable strict schedule */ |
| WMI_PDEV_PARAM_ATF_STRICT_SCH, |
| /** ATF set access category duration, B0-B29 duration, B30-B31: AC */ |
| WMI_PDEV_PARAM_ATF_SCHED_DURATION, |
| /** Default antenna polarization */ |
| WMI_PDEV_PARAM_ANT_PLZN, |
| /** Set mgmt retry limit */ |
| WMI_PDEV_PARAM_MGMT_RETRY_LIMIT, |
| /** Set CCA sensitivity level in dBm */ |
| WMI_PDEV_PARAM_SENSITIVITY_LEVEL, |
| /** Set 2G positive and negative Tx power in 0.5dBm units */ |
| WMI_PDEV_PARAM_SIGNED_TXPOWER_2G, |
| /** Set 5G positive and negative Tx power in 0.5dBm units */ |
| WMI_PDEV_PARAM_SIGNED_TXPOWER_5G, |
| /** Enable/disble AMSDU for tids */ |
| WMI_PDEV_PARAM_ENABLE_PER_TID_AMSDU, |
| /** Enable/disable AMPDU for tids */ |
| WMI_PDEV_PARAM_ENABLE_PER_TID_AMPDU, |
| /** Set CCA threshold in dBm */ |
| WMI_PDEV_PARAM_CCA_THRESHOLD, |
| /** RTS Fixed rate setting */ |
| WMI_PDEV_PARAM_RTS_FIXED_RATE, |
| /** Pdev reset */ |
| WMI_PDEV_PARAM_PDEV_RESET, |
| /** wapi mbssid offset **/ |
| WMI_PDEV_PARAM_WAPI_MBSSID_OFFSET, |
| /** ARP DEBUG source address*/ |
| WMI_PDEV_PARAM_ARP_DBG_SRCADDR, |
| /** ARP DEBUG destination address*/ |
| WMI_PDEV_PARAM_ARP_DBG_DSTADDR, |
| /** ATF enable/disable obss noise scheduling */ |
| WMI_PDEV_PARAM_ATF_OBSS_NOISE_SCH, |
| /** ATF obss noise scaling factor */ |
| WMI_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR, |
| /** |
| * TX power reduction scaling exponent - final tx power is the |
| * nominal tx power (A_MIN(reg_pow,ctl,etc..)) divided by |
| * 2^(scale exponent). For example: |
| * If this scale exponent is 0, the power is unchanged (divided by 2^0) |
| * If this factor is 1, the power is scaled down by 2^1, i.e. 3 dB |
| * If this factor is 2, the power is scaled down by 2^2, i.e. 6 dB |
| * If this factor is 3, the power is scaled down by 2^3, i.e. 9 dB |
| */ |
| WMI_PDEV_PARAM_CUST_TXPOWER_SCALE, |
| /** ATF enabe/disabe dynamically */ |
| WMI_PDEV_PARAM_ATF_DYNAMIC_ENABLE, |
| |
| } WMI_PDEV_PARAM; |
| |
| typedef enum { |
| /** Set the loglevel */ |
| WMI_DBGLOG_LOG_LEVEL = 0x1, |
| /** Enable VAP level debug */ |
| WMI_DBGLOG_VAP_ENABLE, |
| /** Disable VAP level debug */ |
| WMI_DBGLOG_VAP_DISABLE, |
| /** Enable MODULE level debug */ |
| WMI_DBGLOG_MODULE_ENABLE, |
| /** Disable MODULE level debug */ |
| WMI_DBGLOG_MODULE_DISABLE, |
| /** Enable MODULE level debug */ |
| WMI_DBGLOG_MOD_LOG_LEVEL, |
| /** set type of the debug output */ |
| WMI_DBGLOG_TYPE, |
| /** Enable Disable debug */ |
| WMI_DBGLOG_REPORT_ENABLE |
| } WMI_DBG_PARAM; |
| |
| /* param_value for param_id WMI_PDEV_PARAM_CTS_CBW */ |
| typedef enum { |
| WMI_CTS_CBW_INVALID = 0, |
| WMI_CTS_CBW_20, |
| WMI_CTS_CBW_40, |
| WMI_CTS_CBW_80, |
| WMI_CTS_CBW_80_80, |
| WMI_CTS_CBW_160, |
| } WMI_CTS_CBW; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_set_param_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| /** parameter id */ |
| A_UINT32 param_id; |
| /** parametr value */ |
| A_UINT32 param_value; |
| } wmi_pdev_set_param_cmd_fixed_param; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_get_tpc_config_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| /** parameter */ |
| A_UINT32 param; |
| } wmi_pdev_get_tpc_config_cmd_fixed_param; |
| |
| #define WMI_FAST_DIVERSITY_BIT_OFFSET 0 |
| #define WMI_SLOW_DIVERSITY_BIT_OFFSET 1 |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_set_antenna_diversity_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| union { |
| /* OBSOLETE - will be removed once all refs are gone */ |
| A_UINT32 mac_id; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| }; |
| /** parameter */ |
| /** bit0 is for enable/disable FAST diversity, |
| * and bit1 is for enable/disable SLOW diversity, |
| * 0->disable, 1->enable |
| */ |
| A_UINT32 value; |
| } wmi_pdev_set_antenna_diversity_cmd_fixed_param; |
| |
| #define WMI_MAX_RSSI_THRESHOLD_SUPPORTED 3 |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_rssi_breach_monitor_config_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /* vdev_id, where RSSI monitoring will take place */ |
| A_UINT32 vdev_id; |
| /* |
| * host will configure request_id and firmware echo |
| * this id in RSSI_BREACH_EVENT |
| */ |
| A_UINT32 request_id; |
| /* |
| * bit [0-2] = low_rssi_breach_enabled[0-2] |
| * enabled, bit [3-5] = hi_rssi_breach_enabled[0-2] |
| */ |
| A_UINT32 enabled_bitmap; |
| /* unit dBm. host driver to make sure [0] > [1] > [2] */ |
| A_UINT32 low_rssi_breach_threshold[WMI_MAX_RSSI_THRESHOLD_SUPPORTED]; |
| /* unit dBm. host driver to make sure [0] < [1] < [2] */ |
| A_UINT32 hi_rssi_breach_threshold[WMI_MAX_RSSI_THRESHOLD_SUPPORTED]; |
| /* |
| * unit dBm. once low rssi[] breached, same event |
| * bitmap will be generated only after signal gets better |
| * than this level. This value is adopted for all low_rssi_breach_threshold[3] |
| */ |
| A_UINT32 lo_rssi_reenable_hysteresis; |
| /* |
| * unit dBm. once hi rssi[] breached, same event bitmap |
| * will be generated only after signal gets worse than this |
| * level. This value is adopted for all hi_rssi_breach_threshold[3] |
| */ |
| A_UINT32 hi_rssi_reenable_histeresis; |
| /* |
| * After last event is generated, we wait |
| * until this interval to generate next event |
| */ |
| A_UINT32 min_report_interval; |
| /* this is to suppress number of event to be generated */ |
| A_UINT32 max_num_report; |
| } wmi_rssi_breach_monitor_config_fixed_param; |
| |
| typedef struct { |
| /** parameter */ |
| A_UINT32 param; |
| } wmi_pdev_dump_cmd; |
| |
| typedef enum { |
| PAUSE_TYPE_CHOP = 0x1, |
| /** for MCC (switch channel), only vdev_map is valid */ |
| PAUSE_TYPE_PS = 0x2, /** for peer station sleep in sap mode, only peer_id is valid */ |
| PAUSE_TYPE_UAPSD = 0x3, |
| /** for uapsd, only peer_id and tid_map are valid. */ |
| PAUSE_TYPE_P2P_CLIENT_NOA = 0x4, |
| /** only vdev_map is valid, actually only one vdev id is set at one time */ |
| PAUSE_TYPE_P2P_GO_PS = 0x5, |
| /** only vdev_map is valid, actually only one vdev id is set at one time */ |
| PAUSE_TYPE_STA_ADD_BA = 0x6, |
| /** only peer_id and tid_map are valid, actually only one tid is set at one time */ |
| PAUSE_TYPE_AP_PS = 0x7, |
| /** for pausing AP vdev when all the connected clients are in PS. only vdev_map is valid */ |
| PAUSE_TYPE_IBSS_PS = 0x8, |
| /** for pausing IBSS vdev when all the peers are in PS. only vdev_map is valid */ |
| PAUSE_TYPE_CHOP_TDLS_OFFCHAN = 0x9, |
| /* |
| * for TDLS offchannel MCC (switch channel), only vdev_map is valid, |
| * TDLS connection tracker needs to be notified |
| */ |
| PAUSE_TYPE_HOST = 0x15, |
| /** host is requesting vdev pause */ |
| } wmi_tx_pause_type; |
| |
| typedef enum { |
| ACTION_PAUSE = 0x0, |
| ACTION_UNPAUSE = 0x1, |
| } wmi_tx_pause_action; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 pause_type; |
| A_UINT32 action; |
| A_UINT32 vdev_map; |
| A_UINT32 peer_id; |
| A_UINT32 tid_map; |
| } wmi_tx_pause_event_fixed_param; |
| |
| typedef enum { |
| WMI_MGMT_TX_COMP_TYPE_COMPLETE_OK = 0, |
| WMI_MGMT_TX_COMP_TYPE_DISCARD, |
| WMI_MGMT_TX_COMP_TYPE_INSPECT, |
| WMI_MGMT_TX_COMP_TYPE_COMPLETE_NO_ACK, |
| WMI_MGMT_TX_COMP_TYPE_MAX, |
| } WMI_MGMT_TX_COMP_STATUS_TYPE; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 desc_id; /* from tx_send_cmd */ |
| A_UINT32 status; /* WMI_MGMT_TX_COMP_STATUS_TYPE */ |
| } wmi_mgmt_tx_compl_event_fixed_param; |
| |
| #define WMI_TPC_RATE_MAX 160 |
| /* WMI_TPC_TX_NUM_CHAIN macro can't be changed without breaking the WMI compatibility */ |
| #define WMI_TPC_TX_NUM_CHAIN 4 |
| |
| typedef enum { |
| WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, |
| WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, |
| WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, |
| } WMI_TPC_CONFIG_EVENT_FLAG; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_tpc_config_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 regDomain; |
| A_UINT32 chanFreq; |
| A_UINT32 phyMode; |
| A_UINT32 twiceAntennaReduction; |
| A_UINT32 twiceMaxRDPower; |
| A_INT32 twiceAntennaGain; |
| A_UINT32 powerLimit; |
| A_UINT32 rateMax; |
| A_UINT32 numTxChain; |
| A_UINT32 ctl; |
| A_UINT32 flags; |
| /* WMI_TPC_TX_NUM_CHAIN macro can't be changed without |
| * breaking the WMI compatibility |
| */ |
| A_INT8 maxRegAllowedPower[WMI_TPC_TX_NUM_CHAIN]; |
| A_INT8 |
| maxRegAllowedPowerAGCDD[WMI_TPC_TX_NUM_CHAIN] |
| [WMI_TPC_TX_NUM_CHAIN]; |
| A_INT8 |
| maxRegAllowedPowerAGSTBC[WMI_TPC_TX_NUM_CHAIN] |
| [WMI_TPC_TX_NUM_CHAIN]; |
| A_INT8 |
| maxRegAllowedPowerAGTXBF[WMI_TPC_TX_NUM_CHAIN] |
| [WMI_TPC_TX_NUM_CHAIN]; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| /* This TLV is followed by a byte array: |
| * A_UINT8 ratesArray[]; |
| */ |
| } wmi_pdev_tpc_config_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_l1ss_track_event_fixed_param */ |
| A_UINT32 periodCnt; |
| A_UINT32 L1Cnt; |
| A_UINT32 L11Cnt; |
| A_UINT32 L12Cnt; |
| A_UINT32 L1Entry; |
| A_UINT32 L11Entry; |
| A_UINT32 L12Entry; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| } wmi_pdev_l1ss_track_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 len; |
| A_UINT32 msgref; |
| A_UINT32 segmentInfo; |
| } wmi_pdev_seg_hdr_info; |
| |
| /* |
| * Transmit power scale factor. |
| * |
| */ |
| typedef enum { |
| WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ |
| WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ |
| WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ |
| WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ |
| WMI_TP_SCALE_MIN = 4, /* min, but still on */ |
| WMI_TP_SCALE_SIZE = 5, /* max num of enum */ |
| } WMI_TP_SCALE; |
| |
| #define WMI_MAX_DEBUG_MESG (sizeof(A_UINT32) * 32) |
| |
| typedef struct { |
| /** message buffer, NULL terminated */ |
| char bufp[WMI_MAX_DEBUG_MESG]; |
| } wmi_debug_mesg_event; |
| |
| enum { |
| /** P2P device */ |
| VDEV_SUBTYPE_P2PDEV = 0, |
| /** P2P client */ |
| VDEV_SUBTYPE_P2PCLI, |
| /** P2P GO */ |
| VDEV_SUBTYPE_P2PGO, |
| /** BT3.0 HS */ |
| VDEV_SUBTYPE_BT, |
| }; |
| |
| typedef struct { |
| /** idnore power , only use flags , mode and freq */ |
| wmi_channel chan; |
| } wmi_pdev_set_channel_cmd; |
| |
| typedef enum { |
| WMI_PKTLOG_EVENT_RX = 0x1, |
| WMI_PKTLOG_EVENT_TX = 0x2, |
| WMI_PKTLOG_EVENT_RCF = 0x4, /* Rate Control Find */ |
| WMI_PKTLOG_EVENT_RCU = 0x8, /* Rate Control Update */ |
| /* 0x10 used by deprecated DBG_PRINT */ |
| WMI_PKTLOG_EVENT_SMART_ANTENNA = 0x20, /* To support Smart Antenna */ |
| } WMI_PKTLOG_EVENT; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_pktlog_enable_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| WMI_PKTLOG_EVENT evlist; |
| } wmi_pdev_pktlog_enable_cmd_fixed_param; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_pktlog_disable_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| } wmi_pdev_pktlog_disable_cmd_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_mib_stats_enable_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| /* |
| * enable for mib stats collection. |
| * Stats are delivered to host in wmi_mib_stats structure. |
| * If enable_Mib=1, stats collection is enabled. |
| * If enable_Mib=0, stats collection does not happen |
| */ |
| A_UINT32 enable_Mib; |
| } wmi_mib_stats_enable_cmd_fixed_param; |
| |
| /** Customize the DSCP (bit) to TID (0-7) mapping for QOS. |
| * NOTE: This constant cannot be changed without breaking |
| * WMI Compatibility. */ |
| |
| #define WMI_DSCP_MAP_MAX (64) |
| /* |
| * @brief dscp_tid_map_cmdid - command to send the dscp to tid map to the target |
| * @details |
| * Create an API for sending the custom DSCP-to-TID map to the target |
| * If this is a request from the user space or from above the UMAC |
| * then the best place to implement this is in the umac_if_offload of the OL path. |
| * Provide a place holder for this API in the ieee80211com (ic). |
| * |
| * This API will be a function pointer in the ieee80211com (ic). Any user space calls for manually setting the DSCP-to-TID mapping |
| * in the target should be directed to the function pointer in the ic. |
| * |
| * Implementation details of the API to send the map to the target are as described- |
| * |
| * 1. The function will have 2 arguments- struct ieee80211com, DSCP-to-TID map. |
| * DSCP-to-TID map is a one dimensional uint32_t array of length 64 to accomodate |
| * 64 TID values for 2^6 (64) DSCP ids. |
| * Example: |
| * A_UINT32 dscp_tid_map[WMI_DSCP_MAP_MAX] = { |
| * 0, 0, 0, 0, 0, 0, 0, 0, |
| * 1, 1, 1, 1, 1, 1, 1, 1, |
| * 2, 2, 2, 2, 2, 2, 2, 2, |
| * 3, 3, 3, 3, 3, 3, 3, 3, |
| * 4, 4, 4, 4, 4, 4, 4, 4, |
| * 5, 5, 5, 5, 5, 5, 5, 5, |
| * 6, 6, 6, 6, 6, 6, 6, 6, |
| * 7, 7, 7, 7, 7, 7, 7, 7, |
| * }; |
| * |
| * 2. Request for the WMI buffer of size equal to the size of the DSCP-to-TID map. |
| * |
| * 3. Copy the DSCP-to-TID map into the WMI buffer. |
| * |
| * 4. Invoke the wmi_unified_cmd_send to send the cmd buffer to the target with the |
| * WMI_PDEV_SET_DSCP_TID_MAP_CMDID. Arguments to the wmi send cmd API |
| * (wmi_unified_send_cmd) are wmi handle, cmd buffer, length of the cmd buffer and |
| * the WMI_PDEV_SET_DSCP_TID_MAP_CMDID id. |
| * |
| */ |
| |
| /* DEPRECATED - use VDEV level command instead |
| * (wmi_vdev_set_dscp_tid_map_cmd_fixed_param) |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_dscp_tid_map_cmd_fixed_param */ |
| A_UINT32 reserved0; |
| /** placeholder for pdev_id of future multiple MAC products. Init. to 0. */ |
| /* map indicating DSCP to TID conversion */ |
| A_UINT32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; |
| } wmi_pdev_set_dscp_tid_map_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_vdev_set_dscp_tid_map_cmd_fixed_param |
| */ |
| A_UINT32 vdev_id; |
| /** map indicating DSCP to TID conversion */ |
| A_UINT32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; |
| } wmi_vdev_set_dscp_tid_map_cmd_fixed_param; |
| |
| /** Fixed rate (rate-code) for broadcast/ multicast data frames */ |
| /* @brief bcast_mcast_data_rate - set the rates for the bcast/ mcast frames |
| * @details |
| * Create an API for setting the custom rate for the MCAST and BCAST frames |
| * in the target. If this is a request from the user space or from above the UMAC |
| * then the best place to implement this is in the umac_if_offload of the OL path. |
| * Provide a place holder for this API in the ieee80211com (ic). |
| * |
| * Implementation details of the API to set custom rates for MCAST and BCAST in |
| * the target are as described- |
| * |
| * 1. The function will have 3 arguments- |
| * vap structure, |
| * MCAST/ BCAST identifier code, |
| * 8 bit rate code |
| * |
| * The rate-code is a 1-byte field in which:for given rate, nss and preamble |
| * b'7-b-6 indicate the preamble (0 OFDM, 1 CCK, 2, HT, 3 VHT) |
| * b'5-b'4 indicate the NSS (0 - 1x1, 1 - 2x2, 2 - 3x3) |
| * b'3-b'0 indicate the rate, which is indicated as follows: |
| * OFDM : 0: OFDM 48 Mbps |
| * 1: OFDM 24 Mbps |
| * 2: OFDM 12 Mbps |
| * 3: OFDM 6 Mbps |
| * 4: OFDM 54 Mbps |
| * 5: OFDM 36 Mbps |
| * 6: OFDM 18 Mbps |
| * 7: OFDM 9 Mbps |
| * CCK (pream == 1) |
| * 0: CCK 11 Mbps Long |
| * 1: CCK 5.5 Mbps Long |
| * 2: CCK 2 Mbps Long |
| * 3: CCK 1 Mbps Long |
| * 4: CCK 11 Mbps Short |
| * 5: CCK 5.5 Mbps Short |
| * 6: CCK 2 Mbps Short |
| * HT/VHT (pream == 2/3) |
| * 0..7: MCS0..MCS7 (HT) |
| * 0..9: MCS0..MCS9 (VHT) |
| * |
| * 2. Invoke the wmi_unified_vdev_set_param_send to send the rate value |
| * to the target. |
| * Arguments to the API are- |
| * wmi handle, |
| * VAP interface id (av_if_id) defined in ol_ath_vap_net80211, |
| * WMI_VDEV_PARAM_BCAST_DATA_RATE/ WMI_VDEV_PARAM_MCAST_DATA_RATE, |
| * rate value. |
| */ |
| typedef enum { |
| WMI_SET_MCAST_RATE, |
| WMI_SET_BCAST_RATE |
| } MCAST_BCAST_RATE_ID; |
| |
| typedef struct { |
| MCAST_BCAST_RATE_ID rate_id; |
| A_UINT32 rate; |
| } mcast_bcast_rate; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wmm_params */ |
| A_UINT32 cwmin; |
| A_UINT32 cwmax; |
| A_UINT32 aifs; |
| A_UINT32 txoplimit; |
| A_UINT32 acm; |
| A_UINT32 no_ack; |
| } wmi_wmm_params; |
| |
| /* DEPRECATED - use VDEV level command instead |
| * (wmi_vdev_set_wmm_params_cmd_fixed_param) |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_set_wmm_params_cmd_fixed_param */ |
| A_UINT32 reserved0; |
| /** placeholder for pdev_id of future multiple MAC products. Init. to 0. */ |
| A_UINT32 dg_type; |
| |
| /* The TLVs for the 4 AC follows: |
| * wmi_wmm_params wmm_params_ac_be; |
| * wmi_wmm_params wmm_params_ac_bk; |
| * wmi_wmm_params wmm_params_ac_vi; |
| * wmi_wmm_params wmm_params_ac_vo; |
| */ |
| } wmi_pdev_set_wmm_params_cmd_fixed_param; |
| |
| typedef enum { |
| WMI_REQUEST_PEER_STAT = 0x01, |
| WMI_REQUEST_AP_STAT = 0x02, |
| WMI_REQUEST_PDEV_STAT = 0x04, |
| WMI_REQUEST_VDEV_STAT = 0x08, |
| WMI_REQUEST_BCNFLT_STAT = 0x10, |
| WMI_REQUEST_VDEV_RATE_STAT = 0x20, |
| WMI_REQUEST_INST_STAT = 0x40, |
| WMI_REQUEST_MIB_STAT = 0x80, |
| } wmi_stats_id; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_request_stats_cmd_fixed_param */ |
| wmi_stats_id stats_id; |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| } wmi_request_stats_cmd_fixed_param; |
| |
| /* stats type bitmap */ |
| #define WMI_LINK_STATS_RADIO 0x00000001 |
| #define WMI_LINK_STATS_IFACE 0x00000002 |
| #define WMI_LINK_STATS_ALL_PEER 0x00000004 |
| #define WMI_LINK_STATS_PER_PEER 0x00000008 |
| |
| /* wifi clear statistics bitmap */ |
| #define WIFI_STATS_RADIO 0x00000001 /** all radio statistics */ |
| #define WIFI_STATS_RADIO_CCA 0x00000002 /** cca_busy_time (within radio statistics) */ |
| #define WIFI_STATS_RADIO_CHANNELS 0x00000004 /** all channel statistics (within radio statistics) */ |
| #define WIFI_STATS_RADIO_SCAN 0x00000008 /** all scan statistics (within radio statistics) */ |
| #define WIFI_STATS_IFACE 0x00000010 /** all interface statistics */ |
| #define WIFI_STATS_IFACE_TXRATE 0x00000020 /** all tx rate statistics (within interface statistics) */ |
| #define WIFI_STATS_IFACE_AC 0x00000040 /** all ac statistics (within interface statistics) */ |
| #define WIFI_STATS_IFACE_CONTENTION 0x00000080 /** all contention (min, max, avg) statistics (within ac statisctics) */ |
| #define WMI_STATS_IFACE_ALL_PEER 0x00000100 /** All peer stats on this interface */ |
| #define WMI_STATS_IFACE_PER_PEER 0x00000200 /** Clear particular peer stats depending on the peer_mac */ |
| |
| /** Default value for stats if the stats collection has not started */ |
| #define WMI_STATS_VALUE_INVALID 0xffffffff |
| |
| #define WMI_DIAG_ID_GET(diag_events_logs) WMI_GET_BITS(diag_events_logs, 0, 16) |
| #define WMI_DIAG_ID_SET(diag_events_logs, value) WMI_SET_BITS(diag_events_logs, 0, 16, value) |
| #define WMI_DIAG_TYPE_GET(diag_events_logs) WMI_GET_BITS(diag_events_logs, 16, 1) |
| #define WMI_DIAG_TYPE_SET(diag_events_logs, value) WMI_SET_BITS(diag_events_logs, 16, 1, value) |
| #define WMI_DIAG_ID_ENABLED_DISABLED_GET(diag_events_logs) WMI_GET_BITS(diag_events_logs, 17, 1) |
| #define WMI_DIAG_ID_ENABLED_DISABLED_SET(diag_events_logs, value) WMI_SET_BITS(diag_events_logs, 17, 1, value) |
| |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_diag_event_log_config_fixed_param */ |
| A_UINT32 num_of_diag_events_logs; |
| /* The TLVs will follow. |
| * A_UINT32 diag_events_logs_list[]; 0-15 Bits Diag EVENT/LOG ID, |
| * Bit 16 - DIAG type EVENT/LOG, 0 - Event, 1 - LOG |
| * Bit 17 Indicate if the DIAG type is Enabled/Disabled. |
| */ |
| } wmi_diag_event_log_config_fixed_param; |
| |
| #define WMI_DIAG_FREQUENCY_GET(diag_events_logs) WMI_GET_BITS(diag_events_logs, 17, 1) |
| #define WMI_DIAG_FREQUENCY_SET(diag_events_logs, value) WMI_SET_BITS(diag_events_logs, 17, 1, value) |
| #define WMI_DIAG_EXT_FEATURE_GET(diag_events_logs) WMI_GET_BITS(diag_events_logs, 18, 1) |
| #define WMI_DIAG_EXT_FEATURE_SET(diag_events_logs, value) WMI_SET_BITS(diag_events_logs, 18, 1, value) |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 num_of_diag_events_logs; |
| /* The TLVs will follow. |
| * A_UINT32 diag_events_logs_list[]; 0-15 Bits Diag EVENT/LOG ID, |
| * Bit 16 - DIAG type EVENT/LOG, 0 - Event, 1 - LOG |
| * Bit 17 - Frequncy of the DIAG EVENT/LOG High Frequency -1, Low Frequency - 0 |
| * Bit 18 - Set if the EVENTS/LOGs are used for EXT DEBUG Framework |
| */ |
| } wmi_diag_event_log_supported_event_fixed_params; |
| |
| typedef struct { |
| /** |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_debug_mesg_flush_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** placeholder for future */ |
| A_UINT32 reserved0; |
| } wmi_debug_mesg_flush_fixed_param; |
| |
| typedef struct { |
| /** |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_debug_mesg_flush_complete_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** placeholder for future */ |
| A_UINT32 reserved0; |
| } wmi_debug_mesg_flush_complete_fixed_param; |
| |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_rssi_breach_fixed_param |
| * vdev_id, where RSSI breach event occurred |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| /* request id */ |
| A_UINT32 request_id; |
| /* |
| * bitmap[0-2] is corresponding to low_rssi[0-2]. bitmap[3-5] is |
| * corresponding to hi_rssi[0-2] |
| */ |
| A_UINT32 event_bitmap; |
| /* rssi at the time of RSSI breach. Unit dBm */ |
| A_UINT32 rssi; |
| /* bssid of the monitored AP's */ |
| wmi_mac_addr bssid; |
| } wmi_rssi_breach_event_fixed_param; |
| |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_fw_mem_dump */ |
| A_UINT32 tlv_header; |
| /** unique id identifying the segment */ |
| A_UINT32 seg_id; |
| /** Start address of the segment to be read */ |
| A_UINT32 seg_start_addr_lo; |
| A_UINT32 seg_start_addr_hi; |
| /** Length of the segment to be read */ |
| A_UINT32 seg_length; |
| /** Host bufeer address to which the segment will be read and dumped */ |
| A_UINT32 dest_addr_lo; |
| A_UINT32 dest_addr_hi; |
| } wmi_fw_mem_dump; |
| |
| /* Command to get firmware memory dump*/ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_get_fw_mem_dump_fixed_param */ |
| A_UINT32 tlv_header; |
| /** unique id identifying the request */ |
| A_UINT32 request_id; |
| /** number of memory dump segments */ |
| A_UINT32 num_fw_mem_dump_segs; |
| /** |
| * This TLV is followed by another TLV |
| * wmi_fw_mem_dump fw_mem_dump[]; |
| */ |
| } wmi_get_fw_mem_dump_fixed_param; |
| |
| /** Event to indicate the completion of fw mem dump */ |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_update_fw_mem_dump_fixed_param */ |
| A_UINT32 tlv_header; |
| /** unique id identifying the request, given |
| * in the request stats command */ |
| A_UINT32 request_id; |
| /*In case of Firmware memory dump */ |
| A_UINT32 fw_mem_dump_complete; |
| } wmi_update_fw_mem_dump_fixed_param; |
| |
| typedef enum { |
| WMI_ROAMING_IDLE = 0, |
| WMI_ROAMING_ACTIVE = 1, |
| } wmi_roam_state; |
| |
| /* access categories */ |
| typedef enum { |
| WMI_AC_VO = 0, |
| WMI_AC_VI = 1, |
| WMI_AC_BE = 2, |
| WMI_AC_BK = 3, |
| WMI_AC_MAX = 4, |
| } wmi_traffic_ac; |
| |
| typedef enum { |
| WMI_STA_STATS = 0, |
| WMI_SOFTAP_STATS = 1, |
| WMI_IBSS_STATS = 2, |
| WMI_P2P_CLIENT_STATS = 3, |
| WMI_P2P_GO_STATS = 4, |
| WMI_NAN_STATS = 5, |
| WMI_MESH_STATS = 6, |
| } wmi_link_iface_type; |
| |
| /* channel operating width */ |
| typedef enum { |
| WMI_CHAN_WIDTH_20 = 0, |
| WMI_CHAN_WIDTH_40 = 1, |
| WMI_CHAN_WIDTH_80 = 2, |
| WMI_CHAN_WIDTH_160 = 3, |
| WMI_CHAN_WIDTH_80P80 = 4, |
| WMI_CHAN_WIDTH_5 = 5, |
| WMI_CHAN_WIDTH_10 = 6, |
| } wmi_channel_width; |
| |
| /*Clear stats*/ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_clear_link_stats_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** stop_stats_collection_req = 1 will imply stop the statistics collection */ |
| A_UINT32 stop_stats_collection_req; |
| /** identifies what stats to be cleared */ |
| A_UINT32 stats_clear_req_mask; |
| /** identifies which peer stats to be cleared. Valid only while clearing PER_REER */ |
| wmi_mac_addr peer_macaddr; |
| } wmi_clear_link_stats_cmd_fixed_param; |
| |
| /* Link Stats configuration params. Trigger the link layer statistics collection*/ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_start_link_stats_cmd_fixed_param */ |
| /** threshold to classify the pkts as short or long */ |
| A_UINT32 mpdu_size_threshold; |
| /** set for field debug mode. Driver should collect all statistics regardless of performance impact.*/ |
| A_UINT32 aggressive_statistics_gathering; |
| } wmi_start_link_stats_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_request_link_stats_cmd_fixed_param */ |
| /** Type of stats required. This is a bitmask WMI_LINK_STATS_RADIO, WMI_LINK_STATS_IFACE */ |
| A_UINT32 stats_type; |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** unique id identifying the request, generated by the caller */ |
| A_UINT32 request_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| } wmi_request_link_stats_cmd_fixed_param; |
| |
| /* channel statistics */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_channel_stats */ |
| /** Channel width (20, 40, 80, 80+80, 160) enum wmi_channel_width*/ |
| A_UINT32 channel_width; |
| /** Primary 20 MHz channel */ |
| A_UINT32 center_freq; |
| /** center frequency (MHz) first segment */ |
| A_UINT32 center_freq0; |
| /** center frequency (MHz) second segment */ |
| A_UINT32 center_freq1; |
| /** msecs the radio is awake (32 bits number accruing over time) */ |
| A_UINT32 radio_awake_time; |
| /** msecs the CCA register is busy (32 bits number accruing over time) */ |
| A_UINT32 cca_busy_time; |
| } wmi_channel_stats; |
| |
| /* radio statistics */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_radio_link_stats */ |
| /** Wifi radio (if multiple radio supported) */ |
| A_UINT32 radio_id; |
| /** msecs the radio is awake (32 bits number accruing over time) */ |
| A_UINT32 on_time; |
| /** msecs the radio is transmitting (32 bits number accruing over time) */ |
| A_UINT32 tx_time; |
| /** msecs the radio is in active receive (32 bits number accruing over time) */ |
| A_UINT32 rx_time; |
| /** msecs the radio is awake due to all scan (32 bits number accruing over time) */ |
| A_UINT32 on_time_scan; |
| /** msecs the radio is awake due to NAN (32 bits number accruing over time) */ |
| A_UINT32 on_time_nbd; |
| /** msecs the radio is awake due to G?scan (32 bits number accruing over time) */ |
| A_UINT32 on_time_gscan; |
| /** msecs the radio is awake due to roam?scan (32 bits number accruing over time) */ |
| A_UINT32 on_time_roam_scan; |
| /** msecs the radio is awake due to PNO scan (32 bits number accruing over time) */ |
| A_UINT32 on_time_pno_scan; |
| /** msecs the radio is awake due to HS2.0 scans and GAS exchange (32 bits number accruing over time) */ |
| A_UINT32 on_time_hs20; |
| /** number of channels */ |
| A_UINT32 num_channels; |
| } wmi_radio_link_stats; |
| |
| /** Radio statistics (once started) do not stop or get reset unless wifi_clear_link_stats is invoked */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_stats_event_fixed_param */ |
| /** unique id identifying the request, given in the request stats command */ |
| A_UINT32 request_id; |
| /** Number of radios*/ |
| A_UINT32 num_radio; |
| /** more_data will be set depending on the number of radios */ |
| A_UINT32 more_radio_events; |
| /* |
| * This TLV is followed by another TLV of array of bytes |
| * size of(struct wmi_radio_link_stats); |
| * |
| * This TLV is followed by another TLV of array of bytes |
| * num_channels * size of(struct wmi_channel_stats) |
| */ |
| |
| } wmi_radio_link_stats_event_fixed_param; |
| |
| /* per rate statistics */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_rate_stats */ |
| /** rate information |
| * The rate-code is a 1-byte field in which:for given rate, nss and preamble |
| * b'7-b-6 indicate the preamble (0 OFDM, 1 CCK, 2, HT, 3 VHT) |
| * b'5-b'4 indicate the NSS (0 - 1x1, 1 - 2x2, 2 - 3x3) |
| * b'3-b'0 indicate the rate, which is indicated as follows: |
| * OFDM : 0: OFDM 48 Mbps |
| * 1: OFDM 24 Mbps |
| * 2: OFDM 12 Mbps |
| * 3: OFDM 6 Mbps |
| * 4: OFDM 54 Mbps |
| * 5: OFDM 36 Mbps |
| * 6: OFDM 18 Mbps |
| * 7: OFDM 9 Mbps |
| * CCK (pream == 1) |
| * 0: CCK 11 Mbps Long |
| * 1: CCK 5.5 Mbps Long |
| * 2: CCK 2 Mbps Long |
| * 3: CCK 1 Mbps Long |
| * 4: CCK 11 Mbps Short |
| * 5: CCK 5.5 Mbps Short |
| * 6: CCK 2 Mbps Short |
| * HT/VHT (pream == 2/3) |
| * 0..7: MCS0..MCS7 (HT) |
| * 0..9: MCS0..MCS9 (VHT) |
| */ |
| A_UINT32 rate; |
| /** units of 100 Kbps */ |
| A_UINT32 bitrate; |
| /** number of successfully transmitted data pkts (ACK rcvd) */ |
| A_UINT32 tx_mpdu; |
| /** number of received data pkts */ |
| A_UINT32 rx_mpdu; |
| /** number of data packet losses (no ACK) */ |
| A_UINT32 mpdu_lost; |
| /** total number of data pkt retries */ |
| A_UINT32 retries; |
| /** number of short data pkt retries */ |
| A_UINT32 retries_short; |
| /** number of long data pkt retries */ |
| A_UINT32 retries_long; |
| } wmi_rate_stats; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_link_stats */ |
| /** peer type (AP, TDLS, GO etc.) enum wmi_peer_type*/ |
| A_UINT32 peer_type; |
| /** mac address */ |
| wmi_mac_addr peer_mac_address; |
| /** peer wmi_CAPABILITY_XXX */ |
| A_UINT32 capabilities; |
| /** number of rates */ |
| A_UINT32 num_rates; |
| } wmi_peer_link_stats; |
| |
| /** PEER statistics (once started) reset and start afresh after each connection */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_stats_event_fixed_param */ |
| /** unique id identifying the request, given in the request stats command */ |
| A_UINT32 request_id; |
| /** number of peers accomidated in this particular event */ |
| A_UINT32 num_peers; |
| /** Indicates the fragment number */ |
| A_UINT32 peer_event_number; |
| /** Indicates if there are more peers which will be sent as seperate peer_stats event */ |
| A_UINT32 more_data; |
| |
| /** |
| * This TLV is followed by another TLV |
| * num_peers * size of(struct wmi_peer_stats) |
| * num_rates * size of(struct wmi_rate_stats). num_rates is the sum of the rates of all the peers. |
| */ |
| } wmi_peer_stats_event_fixed_param; |
| |
| /* per access category statistics */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wmm_ac_stats */ |
| /** access category (VI, VO, BE, BK) enum wmi_traffic_ac*/ |
| A_UINT32 ac_type; |
| /** number of successfully transmitted unicast data pkts (ACK rcvd) */ |
| A_UINT32 tx_mpdu; |
| /** number of received unicast mpdus */ |
| A_UINT32 rx_mpdu; |
| /** number of succesfully transmitted multicast data packets */ |
| /** STA case: implies ACK received from AP for the unicast packet in which mcast pkt was sent */ |
| A_UINT32 tx_mcast; |
| /** number of received multicast data packets */ |
| A_UINT32 rx_mcast; |
| /** number of received unicast a-mpdus */ |
| A_UINT32 rx_ampdu; |
| /** number of transmitted unicast a-mpdus */ |
| A_UINT32 tx_ampdu; |
| /** number of data pkt losses (no ACK) */ |
| A_UINT32 mpdu_lost; |
| /** total number of data pkt retries */ |
| A_UINT32 retries; |
| /** number of short data pkt retries */ |
| A_UINT32 retries_short; |
| /** number of long data pkt retries */ |
| A_UINT32 retries_long; |
| /** data pkt min contention time (usecs) */ |
| A_UINT32 contention_time_min; |
| /** data pkt max contention time (usecs) */ |
| A_UINT32 contention_time_max; |
| /** data pkt avg contention time (usecs) */ |
| A_UINT32 contention_time_avg; |
| /** num of data pkts used for contention statistics */ |
| A_UINT32 contention_num_samples; |
| } wmi_wmm_ac_stats; |
| |
| /* interface statistics */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_iface_link_stats */ |
| /** access point beacon received count from connected AP */ |
| A_UINT32 beacon_rx; |
| /** access point mgmt frames received count from connected AP (including Beacon) */ |
| A_UINT32 mgmt_rx; |
| /** action frames received count */ |
| A_UINT32 mgmt_action_rx; |
| /** action frames transmit count */ |
| A_UINT32 mgmt_action_tx; |
| /** access Point Beacon and Management frames RSSI (averaged) */ |
| A_UINT32 rssi_mgmt; |
| /** access Point Data Frames RSSI (averaged) from connected AP */ |
| A_UINT32 rssi_data; |
| /** access Point ACK RSSI (averaged) from connected AP */ |
| A_UINT32 rssi_ack; |
| /** number of peers */ |
| A_UINT32 num_peers; |
| /** Indicates how many peer_stats events will be sent depending on the num_peers. */ |
| A_UINT32 num_peer_events; |
| /** number of ac */ |
| A_UINT32 num_ac; |
| /** Roaming Stat */ |
| A_UINT32 roam_state; |
| /** |
| * Average Beacon spread offset is the averaged time delay between TBTT |
| * and beacon TSF */ |
| /** Upper 32 bits of averaged 64 bit beacon spread offset */ |
| A_UINT32 avg_bcn_spread_offset_high; |
| /** Lower 32 bits of averaged 64 bit beacon spread offset */ |
| A_UINT32 avg_bcn_spread_offset_low; |
| /** Takes value of 1 if AP leaks packets after sending an ACK for PM=1 otherwise 0 */ |
| A_UINT32 is_leaky_ap; |
| /** Average number of frames received from AP after receiving the ACK for a frame with PM=1 */ |
| A_UINT32 avg_rx_frms_leaked; |
| /** Rx leak watch window currently in force to minimize data loss |
| * because of leaky AP. Rx leak window is the |
| * time driver waits before shutting down the radio or switching the |
| * channel and after receiving an ACK for |
| * a data frame with PM bit set) */ |
| A_UINT32 rx_leak_window; |
| } wmi_iface_link_stats; |
| |
| /** Interface statistics (once started) reset and start afresh after each connection */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_iface_link_stats_event_fixed_param */ |
| /** unique id identifying the request, given in the request stats command */ |
| A_UINT32 request_id; |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /* |
| * This TLV is followed by another TLV |
| * wmi_iface_link_stats iface_link_stats; |
| * num_ac * size of(struct wmi_wmm_ac_stats) |
| */ |
| } wmi_iface_link_stats_event_fixed_param; |
| |
| /** Suspend option */ |
| enum { |
| WMI_PDEV_SUSPEND, /* suspend */ |
| WMI_PDEV_SUSPEND_AND_DISABLE_INTR, /* suspend and disable all interrupts */ |
| }; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_suspend_cmd_fixed_param */ |
| /* suspend option sent to target */ |
| A_UINT32 reserved0; /** placeholder for pdev_id of future multiple MAC products. Init. to 0. */ |
| A_UINT32 suspend_opt; |
| } wmi_pdev_suspend_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_resume_cmd_fixed_param */ |
| /** Reserved for future use */ |
| A_UINT32 reserved0; |
| } wmi_pdev_resume_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_rate_stats_event_fixed_param, */ |
| A_UINT32 num_vdev_stats; /* number of vdevs */ |
| } wmi_vdev_rate_stats_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len, tag equals WMITLV_TAG_STRUC_wmi_vdev_rate_ht_info */ |
| A_UINT32 vdevid; /* Id of the wlan vdev */ |
| A_UINT32 tx_nss; /* Bit 28 of tx_rate_kbps has this info - based on last data packet transmitted */ |
| A_UINT32 rx_nss; /* Bit 24 of rx_rate_kbps - same as above */ |
| A_UINT32 tx_preamble; /* Bits 30-29 from tx_rate_kbps */ |
| A_UINT32 rx_preamble; /* Bits 26-25 from rx_rate_kbps */ |
| } wmi_vdev_rate_ht_info; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_stats_event_fixed_param */ |
| wmi_stats_id stats_id; |
| /** number of pdev stats event structures (wmi_pdev_stats) 0 or 1 */ |
| A_UINT32 num_pdev_stats; |
| /** number of vdev stats event structures (wmi_vdev_stats) 0 or max vdevs */ |
| A_UINT32 num_vdev_stats; |
| /** number of peer stats event structures (wmi_peer_stats) 0 or max peers */ |
| A_UINT32 num_peer_stats; |
| A_UINT32 num_bcnflt_stats; |
| /** number of chan stats event structures (wmi_chan_stats) 0 to MAX MCC CHANS */ |
| A_UINT32 num_chan_stats; |
| /** number of MIB stats event structures (wmi_mib_stats) */ |
| A_UINT32 num_mib_stats; |
| /* This TLV is followed by another TLV of array of bytes |
| * A_UINT8 data[]; |
| * This data array contains |
| * num_pdev_stats * size of(struct wmi_pdev_stats) |
| * num_vdev_stats * size of(struct wmi_vdev_stats) |
| * num_peer_stats * size of(struct wmi_peer_stats) |
| * num_bcnflt_stats * size_of() |
| * num_chan_stats * size of(struct wmi_chan_stats) |
| * num_mib_stats * size of(struct wmi_mib_stats) |
| * |
| */ |
| } wmi_stats_event_fixed_param; |
| |
| /** |
| * PDEV statistics |
| * @todo |
| * add all PDEV stats here |
| */ |
| typedef struct { |
| /** Channel noise floor */ |
| A_INT32 chan_nf; |
| /** TX frame count */ |
| A_UINT32 tx_frame_count; |
| /** RX frame count */ |
| A_UINT32 rx_frame_count; |
| /** rx clear count */ |
| A_UINT32 rx_clear_count; |
| /** cycle count */ |
| A_UINT32 cycle_count; |
| /** Phy error count */ |
| A_UINT32 phy_err_count; |
| /** Channel Tx Power */ |
| A_UINT32 chan_tx_pwr; |
| /** WAL dbg stats */ |
| struct wlan_dbg_stats pdev_stats; |
| |
| } wmi_pdev_stats; |
| |
| /** |
| * VDEV statistics |
| * @todo |
| * add all VDEV stats here |
| */ |
| |
| typedef struct { |
| A_INT32 bcn_snr; |
| A_INT32 dat_snr; |
| } wmi_snr_info; |
| |
| typedef struct { |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| wmi_snr_info vdev_snr; |
| A_UINT32 tx_frm_cnt[WLAN_MAX_AC]; /* Total number of packets(per AC) that were successfully transmitted(with and without retries, including multi-cast, broadcast) */ |
| A_UINT32 rx_frm_cnt; /* Total number of packets that were successfully received (after appropriate filter rules including multi-cast, broadcast) */ |
| A_UINT32 multiple_retry_cnt[WLAN_MAX_AC]; /*The number of MSDU packets and MMPDU frames per AC |
| that the 802.11 station successfully transmitted after more than one retransmission attempt */ |
| A_UINT32 fail_cnt[WLAN_MAX_AC]; /*Total number packets(per AC) failed to transmit */ |
| A_UINT32 rts_fail_cnt; /*Total number of RTS/CTS sequence failures for transmission of a packet */ |
| A_UINT32 rts_succ_cnt; /*Total number of RTS/CTS sequence success for transmission of a packet */ |
| A_UINT32 rx_err_cnt; /*The receive error count. HAL will provide the RxP FCS error global */ |
| A_UINT32 rx_discard_cnt; /* The sum of the receive error count and dropped-receive-buffer error count. (FCS error) */ |
| A_UINT32 ack_fail_cnt; /*Total number packets failed transmit because of no ACK from the remote entity */ |
| A_UINT32 tx_rate_history[MAX_TX_RATE_VALUES]; /*History of last ten transmit rate, in units of 500 kbit/sec */ |
| A_UINT32 bcn_rssi_history[MAX_RSSI_VALUES]; /*History of last ten Beacon rssi of the connected Bss */ |
| } wmi_vdev_stats; |
| |
| /** |
| * peer statistics. |
| * |
| * @todo |
| * add more stats |
| * |
| */ |
| typedef struct { |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** rssi */ |
| A_UINT32 peer_rssi; |
| /** last tx data rate used for peer */ |
| A_UINT32 peer_tx_rate; |
| /** last rx data rate used for peer */ |
| A_UINT32 peer_rx_rate; |
| } wmi_peer_stats; |
| |
| typedef struct { |
| /** Primary channel freq of the channel for which stats are sent */ |
| A_UINT32 chan_mhz; |
| /** Time spent on the channel */ |
| A_UINT32 sampling_period_us; |
| /** Aggregate duration over a sampling period for which channel activity was observed */ |
| A_UINT32 rx_clear_count; |
| /** Accumalation of the TX PPDU duration over a sampling period */ |
| A_UINT32 tx_duration_us; |
| /** Accumalation of the RX PPDU duration over a sampling period */ |
| A_UINT32 rx_duration_us; |
| } wmi_chan_stats; |
| |
| typedef struct { |
| A_UINT32 tx_mpdu_grp_frag_cnt; /*dot11TransmittedFragmentCount */ |
| A_UINT32 tx_msdu_grp_frm_cnt; /*dot11GroupTransmittedFrameCount */ |
| A_UINT32 tx_msdu_fail_cnt; /*dot11FailedCount*/ |
| A_UINT32 rx_mpdu_frag_cnt; /*dot11ReceivedFragmentCount*/ |
| A_UINT32 rx_msdu_grp_frm_cnt; /*dot11GroupReceivedFrameCount*/ |
| A_UINT32 rx_mpdu_fcs_err; /*dot11FCSErrorCount*/ |
| A_UINT32 tx_msdu_frm_cnt; /*dot11TransmittedFrameCount*/ |
| A_UINT32 tx_msdu_retry_cnt; /*dot11RetryCount*/ |
| A_UINT32 rx_frm_dup_cnt; /*dot11FrameDuplicateCount */ |
| A_UINT32 tx_rts_success_cnt; /*dot11RTSSuccessCount*/ |
| A_UINT32 tx_rts_fail_cnt; /*dot11RTSFailureCount*/ |
| /*dot11QosTransmittedFragmentCount */ |
| A_UINT32 tx_Qos_mpdu_grp_frag_cnt; |
| A_UINT32 tx_Qos_msdu_fail_UP; /*dot11QosFailedCount */ |
| A_UINT32 tx_Qos_msdu_retry_UP; /*dot11QosRetryCount */ |
| A_UINT32 rx_Qos_frm_dup_cnt_UP; /*dot11QosFrameDuplicateCount*/ |
| A_UINT32 tx_Qos_rts_success_cnt_UP; /*dot11QosRTSSuccessCount*/ |
| A_UINT32 tx_Qos_rts_fail_cnt_UP; /*dot11QosRTSFailureCount*/ |
| A_UINT32 rx_Qos_mpdu_frag_cnt_UP; /*dot11QosReceivedFragmentCount*/ |
| A_UINT32 tx_Qos_msdu_frm_cnt_UP; /*dot11QosTransmittedFrameCount*/ |
| A_UINT32 rx_Qos_msdu_discard_cnt_UP; /*dot11QosDiscardedFrameCount*/ |
| A_UINT32 rx_Qos_mpdu_cnt; /*dot11QosMPDUsReceivedCount*/ |
| A_UINT32 rx_Qos_mpdu_retryBit_cnt; /*dot11QosRetriesReceivedCount*/ |
| /*dot11RSNAStatsRobustMgmtCCMPReplays */ |
| A_UINT32 rsna_Mgmt_discard_CCMP_replay_err_cnt; |
| A_UINT32 rsna_TKIP_icv_err_cnt; /*dot11RSNAStatsTKIPICVErrors*/ |
| A_UINT32 rsna_TKIP_replay_err_cnt; /*dot11RSNAStatsTKIPReplays*/ |
| /*dot11RSNAStatsCCMPDecryptErrors */ |
| A_UINT32 rsna_CCMP_decrypt_err_cnt; |
| A_UINT32 rsna_CCMP_replay_err_cnt; /*dot11RSNAStatsCCMPReplays*/ |
| A_UINT32 tx_ampdu_cnt; /*dot11TransmittedAMPDUCount*/ |
| /*dot11TransmittedMPDUsInAMPDUCount*/ |
| A_UINT32 tx_mpdu_cnt_in_ampdu; |
| /*dot11TransmittedOctetsInAMPDUCount*/ |
| union { |
| A_UINT64 counter; /* for use by target only */ |
| struct { |
| A_UINT32 low; |
| A_UINT32 high; |
| } upload; /* for use by host */ |
| } tx_octets_in_ampdu; |
| A_UINT32 rx_ampdu_cnt; /*dot11AMPDUReceivedCount*/ |
| A_UINT32 rx_mpdu_cnt_in_ampdu; /*dot11MPDUInReceivedAMPDUCount*/ |
| union { |
| A_UINT64 counter; /* for use by target only */ |
| struct { |
| A_UINT32 rx_octets_in_ampdu_low; |
| A_UINT32 rx_octets_in_ampdu_high; |
| } upload; /* for use by host */ |
| } rx_octets_in_ampdu; /*dot11ReceivedOctetsInAMPDUCount*/ |
| A_UINT32 reserved_1; |
| A_UINT32 reserved_2; |
| A_UINT32 reserved_3; |
| A_UINT32 reserved_4; |
| } wmi_mib_stats; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_create_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** VDEV type (AP,STA,IBSS,MONITOR) */ |
| A_UINT32 vdev_type; |
| /** VDEV subtype (P2PDEV, P2PCLI, P2PGO, BT3.0)*/ |
| A_UINT32 vdev_subtype; |
| /** VDEV MAC address */ |
| wmi_mac_addr vdev_macaddr; |
| /* Number of configured txrx streams */ |
| A_UINT32 num_cfg_txrx_streams; |
| /* |
| * This TLV is followed by another TLV of array of structures |
| * wmi_vdev_txrx_streams cfg_txrx_streams[]; |
| */ |
| } wmi_vdev_create_cmd_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_vdev_txrx_streams |
| */ |
| A_UINT32 tlv_header; |
| /* band - Should take values from wmi_channel_band_mask */ |
| A_UINT32 band; |
| /* max supported tx streams per given band for this vdev */ |
| A_UINT32 supported_tx_streams; |
| /* max supported rx streams per given band for this vdev */ |
| A_UINT32 supported_rx_streams; |
| } wmi_vdev_txrx_streams; |
| |
| /* wmi_p2p_noa_descriptor structure can't be modified without breaking the compatibility for WMI_HOST_SWBA_EVENTID */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_p2p_noa_descriptor */ |
| A_UINT32 type_count; |
| /** 255: continuous schedule, 0: reserved */ |
| A_UINT32 duration; |
| /** Absent period duration in micro seconds */ |
| A_UINT32 interval; |
| /** Absent period interval in micro seconds */ |
| A_UINT32 start_time; |
| /** 32 bit tsf time when in starts */ |
| } wmi_p2p_noa_descriptor; |
| |
| /** values for vdev_type */ |
| #define WMI_VDEV_TYPE_AP 0x1 |
| #define WMI_VDEV_TYPE_STA 0x2 |
| #define WMI_VDEV_TYPE_IBSS 0x3 |
| #define WMI_VDEV_TYPE_MONITOR 0x4 |
| |
| /** VDEV type is for social wifi interface.This VDEV is Currently mainly needed |
| * by FW to execute the NAN specific WMI commands and also implement NAN specific |
| * operations like Network discovery, service provisioning and service |
| * subscription ..etc. If FW needs NAN VDEV then Host should issue VDEV create |
| * WMI command to create this VDEV once during initialization and host is not |
| * expected to use any VDEV specific WMI commands on this VDEV. |
| **/ |
| #define WMI_VDEV_TYPE_NAN 0x5 |
| |
| #define WMI_VDEV_TYPE_OCB 0x6 |
| |
| /* NAN Data Interface */ |
| #define WMI_VDEV_TYPE_NDI 0x7 |
| |
| /** values for vdev_subtype */ |
| #define WMI_UNIFIED_VDEV_SUBTYPE_P2P_DEVICE 0x1 |
| #define WMI_UNIFIED_VDEV_SUBTYPE_P2P_CLIENT 0x2 |
| #define WMI_UNIFIED_VDEV_SUBTYPE_P2P_GO 0x3 |
| #define WMI_UNIFIED_VDEV_SUBTYPE_PROXY_STA 0x4 |
| #define WMI_UNIFIED_VDEV_SUBTYPE_MESH 0x5 |
| |
| /** values for vdev_start_request flags */ |
| /** Indicates that AP VDEV uses hidden ssid. only valid for |
| * AP/GO */ |
| #define WMI_UNIFIED_VDEV_START_HIDDEN_SSID (1<<0) |
| /** Indicates if robust management frame/management frame |
| * protection is enabled. For GO/AP vdevs, it indicates that |
| * it may support station/client associations with RMF enabled. |
| * For STA/client vdevs, it indicates that sta will |
| * associate with AP with RMF enabled. */ |
| #define WMI_UNIFIED_VDEV_START_PMF_ENABLED (1<<1) |
| |
| /* |
| * Host is sending bcn_tx_rate to override the beacon tx rates. |
| */ |
| #define WMI_UNIFIED_VDEV_START_BCN_TX_RATE_PRESENT (1<<2) |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_start_request_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** requestor id identifying the caller module */ |
| A_UINT32 requestor_id; |
| /** beacon interval from received beacon */ |
| A_UINT32 beacon_interval; |
| /** DTIM Period from the received beacon */ |
| A_UINT32 dtim_period; |
| /** Flags */ |
| A_UINT32 flags; |
| /** ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ |
| wmi_ssid ssid; |
| /** beacon/probe reponse xmit rate. Applicable for SoftAP. */ |
| /** This field will be invalid and ignored unless the */ |
| /** flags field has the WMI_UNIFIED_VDEV_START_BCN_TX_RATE_PRESENT bit. */ |
| /** When valid, this field contains the fixed tx rate for the beacon */ |
| /** and probe response frames send by the GO or SoftAP */ |
| A_UINT32 bcn_tx_rate; |
| /** beacon/probe reponse xmit power. Applicable for SoftAP. */ |
| A_UINT32 bcn_txPower; |
| /** number of p2p NOA descriptor(s) from scan entry */ |
| A_UINT32 num_noa_descriptors; |
| /** Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. |
| During CAC, Our HW shouldn't ack ditected frames */ |
| A_UINT32 disable_hw_ack; |
| /** This field will be invalid unless the Dual Band Simultaneous (DBS) feature is enabled. */ |
| /** The DBS policy manager indicates the preferred number of transmit streams. */ |
| A_UINT32 preferred_tx_streams; |
| /** This field will be invalid unless the Dual Band Simultaneous (DBS) feature is enabled. */ |
| /** the DBS policy manager indicates the preferred number of receive streams. */ |
| A_UINT32 preferred_rx_streams; |
| /* The TLVs follows this structure: |
| * wmi_channel chan; //WMI channel |
| * wmi_p2p_noa_descriptor noa_descriptors[]; //actual p2p NOA descriptor from scan entry |
| */ |
| } wmi_vdev_start_request_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_delete_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| } wmi_vdev_delete_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_up_cmdid_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** aid (assoc id) received in association response for STA VDEV */ |
| A_UINT32 vdev_assoc_id; |
| /** bssid of the BSS the VDEV is joining */ |
| wmi_mac_addr vdev_bssid; |
| } wmi_vdev_up_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_stop_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| } wmi_vdev_stop_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_down_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| } wmi_vdev_down_cmd_fixed_param; |
| |
| typedef struct { |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| } wmi_vdev_standby_response_cmd; |
| |
| typedef struct { |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| } wmi_vdev_resume_response_cmd; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_set_param_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** parameter id */ |
| A_UINT32 param_id; |
| /** parameter value */ |
| A_UINT32 param_value; |
| } wmi_vdev_set_param_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 key_seq_counter_l; |
| A_UINT32 key_seq_counter_h; |
| } wmi_key_seq_counter; |
| |
| #define WMI_CIPHER_NONE 0x0 /* clear key */ |
| #define WMI_CIPHER_WEP 0x1 |
| #define WMI_CIPHER_TKIP 0x2 |
| #define WMI_CIPHER_AES_OCB 0x3 |
| #define WMI_CIPHER_AES_CCM 0x4 |
| #define WMI_CIPHER_WAPI 0x5 |
| #define WMI_CIPHER_CKIP 0x6 |
| #define WMI_CIPHER_AES_CMAC 0x7 |
| #define WMI_CIPHER_ANY 0x8 |
| #define WMI_CIPHER_AES_GCM 0x9 |
| #define WMI_CIPHER_AES_GMAC 0xa |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_install_key_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** MAC address used for installing */ |
| wmi_mac_addr peer_macaddr; |
| /** key index */ |
| A_UINT32 key_ix; |
| /** key flags */ |
| A_UINT32 key_flags; |
| /** key cipher, defined above */ |
| A_UINT32 key_cipher; |
| /** key rsc counter */ |
| wmi_key_seq_counter key_rsc_counter; |
| /** global key rsc counter */ |
| wmi_key_seq_counter key_global_rsc_counter; |
| /** global key tsc counter */ |
| wmi_key_seq_counter key_tsc_counter; |
| /** WAPI key rsc counter */ |
| A_UINT8 wpi_key_rsc_counter[16]; |
| /** WAPI key tsc counter */ |
| A_UINT8 wpi_key_tsc_counter[16]; |
| /** key length */ |
| A_UINT32 key_len; |
| /** key tx mic length */ |
| A_UINT32 key_txmic_len; |
| /** key rx mic length */ |
| A_UINT32 key_rxmic_len; |
| /* |
| * Following this struct are this TLV. |
| * // actual key data |
| * A_UINT8 key_data[]; // contains key followed by tx mic followed by rx mic |
| */ |
| } wmi_vdev_install_key_cmd_fixed_param; |
| |
| /** Preamble types to be used with VDEV fixed rate configuration */ |
| typedef enum { |
| WMI_RATE_PREAMBLE_OFDM, |
| WMI_RATE_PREAMBLE_CCK, |
| WMI_RATE_PREAMBLE_HT, |
| WMI_RATE_PREAMBLE_VHT, |
| } WMI_RATE_PREAMBLE; |
| |
| /** Value to disable fixed rate setting */ |
| #define WMI_FIXED_RATE_NONE (0xff) |
| |
| /** the definition of different VDEV parameters */ |
| typedef enum { |
| /** RTS Threshold */ |
| WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, |
| /** Fragmentation threshold */ |
| WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, |
| /** beacon interval in TUs */ |
| WMI_VDEV_PARAM_BEACON_INTERVAL, |
| /** Listen interval in TUs */ |
| WMI_VDEV_PARAM_LISTEN_INTERVAL, |
| /** muticast rate in Mbps */ |
| WMI_VDEV_PARAM_MULTICAST_RATE, |
| /** management frame rate in Mbps */ |
| WMI_VDEV_PARAM_MGMT_TX_RATE, |
| /** slot time (long vs short) */ |
| WMI_VDEV_PARAM_SLOT_TIME, |
| /** preamble (long vs short) */ |
| WMI_VDEV_PARAM_PREAMBLE, |
| /** SWBA time (time before tbtt in msec) */ |
| WMI_VDEV_PARAM_SWBA_TIME, |
| /** time period for updating VDEV stats */ |
| WMI_VDEV_STATS_UPDATE_PERIOD, |
| /** age out time in msec for frames queued for station in power save*/ |
| WMI_VDEV_PWRSAVE_AGEOUT_TIME, |
| /** Host SWBA interval (time in msec before tbtt for SWBA event generation) */ |
| WMI_VDEV_HOST_SWBA_INTERVAL, |
| /** DTIM period (specified in units of num beacon intervals) */ |
| WMI_VDEV_PARAM_DTIM_PERIOD, |
| /** scheduler air time limit for this VDEV. used by off chan scheduler */ |
| WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, |
| /** enable/dsiable WDS for this VDEV */ |
| WMI_VDEV_PARAM_WDS, |
| /** ATIM Window */ |
| WMI_VDEV_PARAM_ATIM_WINDOW, |
| /** BMISS max */ |
| WMI_VDEV_PARAM_BMISS_COUNT_MAX, |
| /** BMISS first time */ |
| WMI_VDEV_PARAM_BMISS_FIRST_BCNT, |
| /** BMISS final time */ |
| WMI_VDEV_PARAM_BMISS_FINAL_BCNT, |
| /** WMM enables/disabled */ |
| WMI_VDEV_PARAM_FEATURE_WMM, |
| /** Channel width */ |
| WMI_VDEV_PARAM_CHWIDTH, |
| /** Channel Offset */ |
| WMI_VDEV_PARAM_CHEXTOFFSET, |
| /** Disable HT Protection */ |
| WMI_VDEV_PARAM_DISABLE_HTPROTECTION, |
| /** Quick STA Kickout */ |
| WMI_VDEV_PARAM_STA_QUICKKICKOUT, |
| /** Rate to be used with Management frames */ |
| WMI_VDEV_PARAM_MGMT_RATE, |
| /** Protection Mode */ |
| WMI_VDEV_PARAM_PROTECTION_MODE, |
| /** Fixed rate setting */ |
| WMI_VDEV_PARAM_FIXED_RATE, |
| /** Short GI Enable/Disable */ |
| WMI_VDEV_PARAM_SGI, |
| /** Enable LDPC */ |
| WMI_VDEV_PARAM_LDPC, |
| /** Enable Tx STBC */ |
| WMI_VDEV_PARAM_TX_STBC, |
| /** Enable Rx STBC */ |
| WMI_VDEV_PARAM_RX_STBC, |
| /** Intra BSS forwarding */ |
| WMI_VDEV_PARAM_INTRA_BSS_FWD, |
| /** Setting Default xmit key for Vdev */ |
| WMI_VDEV_PARAM_DEF_KEYID, |
| /** NSS width */ |
| WMI_VDEV_PARAM_NSS, |
| /** Set the custom rate for the broadcast data frames */ |
| WMI_VDEV_PARAM_BCAST_DATA_RATE, |
| /** Set the custom rate (rate-code) for multicast data frames */ |
| WMI_VDEV_PARAM_MCAST_DATA_RATE, |
| /** Tx multicast packet indicate Enable/Disable */ |
| WMI_VDEV_PARAM_MCAST_INDICATE, |
| /** Tx DHCP packet indicate Enable/Disable */ |
| WMI_VDEV_PARAM_DHCP_INDICATE, |
| /** Enable host inspection of Tx unicast packet to unknown destination */ |
| WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, |
| |
| /* The minimum amount of time AP begins to consider STA inactive */ |
| WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, |
| |
| /* An associated STA is considered inactive when there is no recent TX/RX |
| * activity and no downlink frames are buffered for it. Once a STA exceeds |
| * the maximum idle inactive time, the AP will send an 802.11 data-null as |
| * a keep alive to verify the STA is still associated. If the STA does ACK |
| * the data-null, or if the data-null is buffered and the STA does not |
| * retrieve it, the STA will be considered unresponsive (see |
| * WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). */ |
| WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, |
| |
| /* An associated STA is considered unresponsive if there is no recent |
| * TX/RX activity and downlink frames are buffered for it. Once a STA |
| * exceeds the maximum unresponsive time, the AP will send a |
| * WMI_STA_KICKOUT event to the host so the STA can be deleted. */ |
| WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, |
| |
| /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ |
| WMI_VDEV_PARAM_AP_ENABLE_NAWDS, |
| /** Enable/Disable RTS-CTS */ |
| WMI_VDEV_PARAM_ENABLE_RTSCTS, |
| /* Enable TXBFee/er */ |
| WMI_VDEV_PARAM_TXBF, |
| |
| /**Set packet power save */ |
| WMI_VDEV_PARAM_PACKET_POWERSAVE, |
| |
| /**Drops un-encrypted packets if any received in an encryted connection |
| * otherwise forwards to host |
| */ |
| WMI_VDEV_PARAM_DROP_UNENCRY, |
| |
| /* |
| * Set TX encap type. |
| * |
| * enum wmi_pkt_type is to be used as the parameter |
| * specifying the encap type. |
| */ |
| WMI_VDEV_PARAM_TX_ENCAP_TYPE, |
| |
| /* |
| * Try to detect stations that woke-up and exited power save but did not |
| * successfully transmit data-null with PM=0 to AP. When this happens, |
| * STA and AP power save state are out-of-sync. Use buffered but |
| * undelivered MSDU to the STA as a hint that the STA is really awake |
| * and expecting normal ASAP delivery, rather than retrieving BU with |
| * PS-Poll, U-APSD trigger, etc. |
| * |
| * 0 disables out-of-sync detection. Maximum time is 255 seconds. |
| */ |
| WMI_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, |
| |
| /* Enable/Disable early rx dynamic adjust feature. |
| * Early-rx dynamic adjust is a advance power save feature. |
| * Early-rx is a wakeup duration before exact TBTT,which is deemed necessary to provide a cushion for various |
| * timing discrepancies in the system. |
| * In current code branch, the duration is set to a very conservative fix value to make sure the drift impact is minimum. |
| * The fix early-tx will result in the unnessary power consume, so a dynamic early-rx adjust algorithm can be designed |
| * properly to minimum the power consume.*/ |
| WMI_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE, |
| |
| /* set target bmiss number per sample cycle if bmiss adjust was chosen. |
| * In this adjust policy,early-rx is adjusted by comparing the current bmiss rate to target bmiss rate |
| * which can be set by user through WMI command. |
| */ |
| WMI_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM, |
| |
| /* set sample cycle(in the unit of beacon interval) if bmiss adjust was chosen */ |
| WMI_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE, |
| |
| /* set slop_step */ |
| WMI_VDEV_PARAM_EARLY_RX_SLOP_STEP, |
| |
| /* set init slop */ |
| WMI_VDEV_PARAM_EARLY_RX_INIT_SLOP, |
| |
| /* pause adjust enable/disable */ |
| WMI_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE, |
| |
| /* Set channel pwr limit value of the vdev the minimal value of all |
| * vdevs operating on this channel will be set as channel tx power |
| * limit, which is used to configure ratearray |
| */ |
| WMI_VDEV_PARAM_TX_PWRLIMIT, |
| |
| /* set the count of snr value for calculation in snr monitor */ |
| WMI_VDEV_PARAM_SNR_NUM_FOR_CAL, |
| |
| /** Roaming offload */ |
| WMI_VDEV_PARAM_ROAM_FW_OFFLOAD, |
| |
| /** Enable Leader request RX functionality for RMC */ |
| WMI_VDEV_PARAM_ENABLE_RMC, |
| |
| /* IBSS does not have deauth/disassoc, vdev has to detect peer gone event |
| * by himself. If the beacon lost time exceed this threshold, the peer is |
| * thought to be gone. */ |
| WMI_VDEV_PARAM_IBSS_MAX_BCN_LOST_MS, |
| |
| /** max rate in kpbs, transmit rate can't go beyond it */ |
| WMI_VDEV_PARAM_MAX_RATE, |
| |
| /* enable/disable drift sample. 0: disable; 1: clk_drift; 2: ap_drift; 3 both clk and ap drift */ |
| WMI_VDEV_PARAM_EARLY_RX_DRIFT_SAMPLE, |
| /* set Tx failure count threshold for the vdev */ |
| WMI_VDEV_PARAM_SET_IBSS_TX_FAIL_CNT_THR, |
| |
| /* set ebt resync timeout value, in the unit of TU */ |
| WMI_VDEV_PARAM_EBT_RESYNC_TIMEOUT, |
| |
| /* Enable Aggregation State Trigger Event */ |
| WMI_VDEV_PARAM_AGGR_TRIG_EVENT_ENABLE, |
| |
| /* This parameter indicates whether IBSS station can enter into power save |
| * mode by sending Null frame (with PM=1). When not allowed, IBSS station has to stay |
| * awake all the time and should never set PM=1 in its transmitted frames. |
| * This parameter is meaningful/valid only when WMI_VDEV_PARAM_ATIM_WINDOW_LENGTH |
| * is non-zero. */ |
| WMI_VDEV_PARAM_IS_IBSS_POWER_SAVE_ALLOWED, |
| |
| /* This parameter indicates if this station can enter into power collapse |
| * for the remaining beacon interval after the ATIM window. |
| * This parameter is meaningful/valid only when WMI_VDEV_PARAM_IS_IBSS_POWER_SAVE_ALLOWED |
| * is set to true. */ |
| WMI_VDEV_PARAM_IS_POWER_COLLAPSE_ALLOWED, |
| |
| /* This parameter indicates whether IBSS station exit power save mode and |
| * enter power active state (by sending Null frame with PM=0 in the immediate ATIM Window) |
| * whenever there is a TX/RX activity. */ |
| WMI_VDEV_PARAM_IS_AWAKE_ON_TXRX_ENABLED, |
| |
| /* If Awake on TX/RX activity is enabled, this parameter indicates |
| * the data inactivity time in number of beacon intervals after which |
| * IBSS station reenters power save by sending Null frame with PM=1. */ |
| WMI_VDEV_PARAM_INACTIVITY_CNT, |
| |
| /* Inactivity time in msec after which TX Service Period (SP) is |
| * terminated by sending a Qos Null frame with EOSP. |
| * If value is 0, TX SP is terminated with the last buffered packet itself |
| * instead of waiting for the inactivity timeout. */ |
| WMI_VDEV_PARAM_TXSP_END_INACTIVITY_TIME_MS, |
| |
| /** DTIM policy */ |
| WMI_VDEV_PARAM_DTIM_POLICY, |
| |
| /* When IBSS network is initialized, PS-supporting device |
| * does not enter protocol sleep state during first |
| * WMI_VDEV_PARAM_IBSS_PS_WARMUP_TIME_SECS seconds. */ |
| WMI_VDEV_PARAM_IBSS_PS_WARMUP_TIME_SECS, |
| |
| /* Enable/Disable 1 RX chain usage during the ATIM window */ |
| WMI_VDEV_PARAM_IBSS_PS_1RX_CHAIN_IN_ATIM_WINDOW_ENABLE, |
| /** |
| * RX Leak window is the time driver waits before shutting down |
| * the radio or switching the channel and after receiving an ACK |
| * for a data frame with PM bit set) |
| */ |
| WMI_VDEV_PARAM_RX_LEAK_WINDOW, |
| |
| /** |
| * Averaging factor(16 bit value) is used in the calculations to |
| * perform averaging of different link level statistics like average |
| * beacon spread or average number of frames leaked |
| */ |
| WMI_VDEV_PARAM_STATS_AVG_FACTOR, |
| /* |
| * disconnect threshold, once the consecutive error for specific peer |
| * exceed this threhold, FW will send kickout event to host |
| */ |
| WMI_VDEV_PARAM_DISCONNECT_TH, |
| /* |
| * The rate_code of RTS_CTS changed by host. Now FW can support |
| * more non-HT rates rather than 1Mbps or 6Mbps */ |
| WMI_VDEV_PARAM_RTSCTS_RATE, |
| |
| /** This parameter indicates whether using a long duration RTS-CTS |
| * protection when a SAP goes off channel in MCC mode */ |
| WMI_VDEV_PARAM_MCC_RTSCTS_PROTECTION_ENABLE, |
| |
| /* |
| * This parameter indicates whether using a broadcast probe response |
| * to increase the detectability of SAP in MCC mode |
| */ |
| WMI_VDEV_PARAM_MCC_BROADCAST_PROBE_ENABLE, |
| |
| /* This parameter indicates the power backoff in percentage |
| * currently supports 100%, 50%, 25%, 12.5%, and minimum |
| * Host passes 0, 1, 2, 3, 4 to Firmware |
| * 0 --> 100% --> no changes, 1 --> 50% --> -3dB, |
| * 2 --> 25% --> -6dB, 3 --> 12.5% --> -9dB, 4 --> minimum --> -32dB |
| */ |
| WMI_VDEV_PARAM_TXPOWER_SCALE, |
| |
| /* TX power backoff in dB: tx power -= param value |
| * Host passes values(DB) to Halphy, Halphy reduces the power table |
| * by the values. Safety check will happen in Halphy. |
| */ |
| WMI_VDEV_PARAM_TXPOWER_SCALE_DECR_DB, |
| /** Multicast to Unicast conversion setting */ |
| WMI_VDEV_PARAM_MCAST2UCAST_SET, |
| |
| /** Total number of HW retries */ |
| WMI_VDEV_PARAM_RC_NUM_RETRIES, |
| |
| /** Max tx percentage for cabq */ |
| WMI_VDEV_PARAM_CABQ_MAXDUR, |
| |
| /** MFPTEST settings */ |
| WMI_VDEV_PARAM_MFPTEST_SET, |
| |
| /** RTS Fixed rate setting */ |
| WMI_VDEV_PARAM_RTS_FIXED_RATE, |
| |
| /** VHT SGI MASK */ |
| WMI_VDEV_PARAM_VHT_SGIMASK, |
| |
| /** VHT80 Auto Rate MASK */ |
| WMI_VDEV_PARAM_VHT80_RATEMASK, |
| |
| /** set Proxy STA features for this vap */ |
| WMI_VDEV_PARAM_PROXY_STA, |
| |
| /** set virtual cell mode - enable/disable */ |
| WMI_VDEV_PARAM_VIRTUAL_CELL_MODE, |
| |
| /** Set receive packet type */ |
| WMI_VDEV_PARAM_RX_DECAP_TYPE, |
| |
| /** Set ratemask with specific Bandwidth and NSS */ |
| WMI_VDEV_PARAM_BW_NSS_RATEMASK, |
| |
| /** Set SENSOR Support */ |
| WMI_VDEV_PARAM_SENSOR_AP, |
| |
| /** Set beacon rate */ |
| WMI_VDEV_PARAM_BEACON_RATE, |
| |
| /** Enable CTS to self for DTIM beacon */ |
| WMI_VDEV_PARAM_DTIM_ENABLE_CTS, |
| |
| /** Disable station kickout at Vap level */ |
| WMI_VDEV_PARAM_STA_KICKOUT, |
| |
| /* VDEV capabilities */ |
| WMI_VDEV_PARAM_CAPABILITIES, /* see capabilities defs below */ |
| } WMI_VDEV_PARAM; |
| |
| /* vdev capabilities bit mask */ |
| #define WMI_VDEV_BEACON_SUPPORT 0x1 |
| #define WMI_VDEV_WDS_LRN_ENABLED 0x2 |
| #define WMI_VDEV_IS_BEACON_SUPPORTED(param) ((param) & WMI_VDEV_BEACON_SUPPORT) |
| #define WMI_VDEV_IS_WDS_LRN_ENABLED(param) ((param) & WMI_VDEV_WDS_LRN_ENABLED) |
| |
| /* TXBF capabilities masks */ |
| #define WMI_TXBF_CONF_SU_TX_BFEE_S 0 |
| #define WMI_TXBF_CONF_SU_TX_BFEE_M 0x1 |
| #define WMI_TXBF_CONF_SU_TX_BFEE (WMI_TXBF_CONF_SU_TX_BFEE_M << \ |
| WMI_TXBF_CONF_SU_TX_BFEE_S) |
| #define WMI_TXBF_CONF_SU_TX_BFEE_GET(x) WMI_F_MS(x, WMI_TXBF_CONF_SU_TX_BFEE) |
| #define WMI_TXBF_CONF_SU_TX_BFEE_SET(x, z) WMI_F_RMW(x, z,\ |
| WMI_TXBF_CONF_SU_TX_BFEE) |
| |
| #define WMI_TXBF_CONF_MU_TX_BFEE_S 1 |
| #define WMI_TXBF_CONF_MU_TX_BFEE_M 0x1 |
| #define WMI_TXBF_CONF_MU_TX_BFEE (WMI_TXBF_CONF_MU_TX_BFEE_M << \ |
| WMI_TXBF_CONF_MU_TX_BFEE_S) |
| #define WMI_TXBF_CONF_MU_TX_BFEE_GET(x) WMI_F_MS(x, WMI_TXBF_CONF_MU_TX_BFEE) |
| #define WMI_TXBF_CONF_MU_TX_BFEE_SET(x, z) WMI_F_RMW(x, z, \ |
| WMI_TXBF_CONF_MU_TX_BFEE) |
| |
| #define WMI_TXBF_CONF_SU_TX_BFER_S 2 |
| #define WMI_TXBF_CONF_SU_TX_BFER_M 0x1 |
| #define WMI_TXBF_CONF_SU_TX_BFER (WMI_TXBF_CONF_SU_TX_BFER_M << \ |
| WMI_TXBF_CONF_SU_TX_BFER_S) |
| #define WMI_TXBF_CONF_SU_TX_BFER_GET(x) WMI_F_MS(x, WMI_TXBF_CONF_SU_TX_BFER) |
| #define WMI_TXBF_CONF_SU_TX_BFER_SET(x, z) WMI_F_RMW(x, z, \ |
| WMI_TXBF_CONF_SU_TX_BFER) |
| |
| #define WMI_TXBF_CONF_MU_TX_BFER_S 3 |
| #define WMI_TXBF_CONF_MU_TX_BFER_M 0x1 |
| #define WMI_TXBF_CONF_MU_TX_BFER (WMI_TXBF_CONF_MU_TX_BFER_M << \ |
| WMI_TXBF_CONF_MU_TX_BFER_S) |
| #define WMI_TXBF_CONF_MU_TX_BFER_GET(x) WMI_F_MS(x, WMI_TXBF_CONF_MU_TX_BFER) |
| #define WMI_TXBF_CONF_MU_TX_BFER_SET(x, z) WMI_F_RMW(x, z, \ |
| WMI_TXBF_CONF_MU_TX_BFER) |
| |
| #define WMI_TXBF_CONF_STS_CAP_S 4 |
| #define WMI_TXBF_CONF_STS_CAP_M 0x7 |
| #define WMI_TXBF_CONF_STS_CAP (WMI_TXBF_CONF_STS_CAP_M << \ |
| WMI_TXBF_CONF_STS_CAP_S) |
| #define WMI_TXBF_CONF_STS_CAP_GET(x) WMI_F_MS(x, WMI_TXBF_CONF_STS_CAP); |
| #define WMI_TXBF_CONF_STS_CAP_SET(x, z) WMI_F_RMW(x, z, \ |
| WMI_TXBF_CONF_STS_CAP) |
| |
| #define WMI_TXBF_CONF_IMPLICIT_BF_S 7 |
| #define WMI_TXBF_CONF_IMPLICIT_BF_M 0x1 |
| #define WMI_TXBF_CONF_IMPLICIT_BF (WMI_TXBF_CONF_IMPLICIT_BF_M << \ |
| WMI_TXBF_CONF_IMPLICIT_BF_S) |
| #define WMI_TXBF_CONF_IMPLICIT_BF_GET(x) WMI_F_MS(x, WMI_TXBF_CONF_IMPLICIT_BF) |
| #define WMI_TXBF_CONF_IMPLICIT_BF_SET(x, z) WMI_F_RMW(x, z, \ |
| WMI_TXBF_CONF_IMPLICIT_BF) |
| |
| #define WMI_TXBF_CONF_BF_SND_DIM_S 8 |
| #define WMI_TXBF_CONF_BF_SND_DIM_M 0x7 |
| #define WMI_TXBF_CONF_BF_SND_DIM (WMI_TXBF_CONF_BF_SND_DIM_M << \ |
| WMI_TXBF_CONF_BF_SND_DIM_S) |
| #define WMI_TXBF_CONF_BF_SND_DIM_GET(x) WMI_F_MS(x, WMI_TXBF_CONF_BF_SND_DIM) |
| #define WMI_TXBF_CONF_BF_SND_DIM_SET(x, z) WMI_F_RMW(x, z, \ |
| WMI_TXBF_CONF_BF_SND_DIM) |
| |
| /* TXBF capabilities */ |
| typedef struct { |
| A_UINT32 txbf_cap; |
| } wmi_vdev_txbf_cap; |
| |
| /* Length of ATIM Window in TU */ |
| #define WMI_VDEV_PARAM_ATIM_WINDOW_LENGTH WMI_VDEV_PARAM_ATIM_WINDOW |
| |
| enum wmi_pkt_type { |
| WMI_PKT_TYPE_RAW = 0, |
| WMI_PKT_TYPE_NATIVE_WIFI = 1, |
| WMI_PKT_TYPE_ETHERNET = 2, |
| }; |
| |
| /******************************************************************* |
| * wmi_vdev_txbf_en is DEPRECATED in favor of wmi_vdev_txbf_cap |
| * Do not use it! |
| *******************************************************************/ |
| |
| typedef struct { |
| A_UINT8 sutxbfee:1, mutxbfee:1, sutxbfer:1, mutxbfer:1, |
| #if defined(AR900B) |
| txb_sts_cap:3, implicit_bf:1; |
| #else |
| reserved:4; |
| #endif |
| } wmi_vdev_txbf_en; |
| |
| /** Upto 8 bits are available for Roaming module to be sent along with |
| WMI_VDEV_PARAM_ROAM_FW_OFFLOAD WMI_VDEV_PARAM **/ |
| /* Enable Roaming FW offload LFR1.5/LFR2.0 implementation */ |
| #define WMI_ROAM_FW_OFFLOAD_ENABLE_FLAG 0x1 |
| /* Enable Roaming module in FW to do scan based on Final BMISS */ |
| #define WMI_ROAM_BMISS_FINAL_SCAN_ENABLE_FLAG 0x2 |
| |
| /** slot time long */ |
| #define WMI_VDEV_SLOT_TIME_LONG 0x1 |
| /** slot time short */ |
| #define WMI_VDEV_SLOT_TIME_SHORT 0x2 |
| /** preablbe long */ |
| #define WMI_VDEV_PREAMBLE_LONG 0x1 |
| /** preablbe short */ |
| #define WMI_VDEV_PREAMBLE_SHORT 0x2 |
| |
| /** the definition of different START/RESTART Event response */ |
| typedef enum { |
| /* Event respose of START CMD */ |
| WMI_VDEV_START_RESP_EVENT = 0, |
| /* Event respose of RESTART CMD */ |
| WMI_VDEV_RESTART_RESP_EVENT, |
| } WMI_START_EVENT_PARAM; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_start_response_event_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** requestor id that requested the VDEV start request */ |
| A_UINT32 requestor_id; |
| /* Respose of Event type START/RESTART */ |
| WMI_START_EVENT_PARAM resp_type; |
| /** status of the response */ |
| A_UINT32 status; |
| /** Vdev chain mask */ |
| A_UINT32 chain_mask; |
| /** Vdev mimo power save mode */ |
| A_UINT32 smps_mode; |
| union { |
| /* OBSOLETE - will be removed once all refs are gone */ |
| A_UINT32 mac_id; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| }; |
| /** Configured Transmit Streams **/ |
| A_UINT32 cfgd_tx_streams; |
| /** Configured Receive Streams **/ |
| A_UINT32 cfgd_rx_streams; |
| } wmi_vdev_start_response_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_stopped_event_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| } wmi_vdev_stopped_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_delete_resp_event_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| } wmi_vdev_delete_resp_event_fixed_param; |
| |
| /** common structure used for simple events (stopped, resume_req, standby response) */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag would be equivalent to actual event */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| } wmi_vdev_simple_event_fixed_param; |
| |
| /** VDEV start response status codes */ |
| #define WMI_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 /** VDEV succesfully started */ |
| #define WMI_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 /** requested VDEV not found */ |
| #define WMI_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 /** unsupported VDEV combination */ |
| |
| /** Beacon processing related command and event structures */ |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_bcn_tx_hdr */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** xmit rate */ |
| A_UINT32 tx_rate; |
| /** xmit power */ |
| A_UINT32 txPower; |
| /** beacon buffer length in bytes */ |
| A_UINT32 buf_len; |
| /* This TLV is followed by array of bytes: |
| * // beacon frame buffer |
| * A_UINT8 bufp[]; |
| */ |
| } wmi_bcn_tx_hdr; |
| |
| /* Beacon filter */ |
| #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ |
| #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ |
| #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ |
| #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ |
| #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ |
| |
| typedef struct { |
| /** Filter ID */ |
| A_UINT32 bcn_filter_id; |
| /** Filter type - wmi_bcn_filter */ |
| A_UINT32 bcn_filter; |
| /** Buffer len */ |
| A_UINT32 bcn_filter_len; |
| /** Filter info (threshold, BSSID, RSSI) */ |
| A_UINT8 *bcn_filter_buf; |
| } wmi_bcn_filter_rx_cmd; |
| |
| /** Capabilities and IEs to be passed to firmware */ |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_bcn_prb_info */ |
| /** Capabilities */ |
| A_UINT32 caps; |
| /** ERP info */ |
| A_UINT32 erp; |
| /** Advanced capabilities */ |
| /** HT capabilities */ |
| /** HT Info */ |
| /** ibss_dfs */ |
| /** wpa Info */ |
| /** rsn Info */ |
| /** rrm info */ |
| /** ath_ext */ |
| /** app IE */ |
| } wmi_bcn_prb_info; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_bcn_tmpl_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** TIM IE offset from the beginning of the template. */ |
| A_UINT32 tim_ie_offset; |
| /** beacon buffer length. data is in TLV data[] */ |
| A_UINT32 buf_len; |
| /* |
| * The TLVs follows: |
| * wmi_bcn_prb_info bcn_prb_info; //beacon probe capabilities and IEs |
| * A_UINT8 data[]; //Variable length data |
| */ |
| } wmi_bcn_tmpl_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_prb_tmpl_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** beacon buffer length. data is in TLV data[] */ |
| A_UINT32 buf_len; |
| /* |
| * The TLVs follows: |
| * wmi_bcn_prb_info bcn_prb_info; //beacon probe capabilities and IEs |
| * A_UINT8 data[]; //Variable length data |
| */ |
| } wmi_prb_tmpl_cmd_fixed_param; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_offload_bcn_tx_status_event_fixed_param */ |
| A_UINT32 tlv_header; |
| /** unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /** bcn tx status, values defined in enum WMI_FRAME_TX_STATUS */ |
| A_UINT32 tx_status; |
| } wmi_offload_bcn_tx_status_event_fixed_param; |
| |
| enum wmi_sta_ps_mode { |
| /** enable power save for the given STA VDEV */ |
| WMI_STA_PS_MODE_DISABLED = 0, |
| /** disable power save for a given STA VDEV */ |
| WMI_STA_PS_MODE_ENABLED = 1, |
| }; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_sta_powersave_mode_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| |
| /** Power save mode |
| * |
| * (see enum wmi_sta_ps_mode) |
| */ |
| A_UINT32 sta_ps_mode; |
| } wmi_sta_powersave_mode_cmd_fixed_param; |
| |
| enum wmi_csa_offload_en { |
| WMI_CSA_OFFLOAD_DISABLE = 0, |
| WMI_CSA_OFFLOAD_ENABLE = 1, |
| }; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_csa_offload_enable_cmd_fixed_param */ |
| A_UINT32 vdev_id; |
| A_UINT32 csa_offload_enable; |
| } wmi_csa_offload_enable_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_csa_offload_chanswitch_cmd_fixed_param */ |
| A_UINT32 vdev_id; |
| /* |
| * The TLVs follows: |
| * wmi_channel chan; |
| */ |
| } wmi_csa_offload_chanswitch_cmd_fixed_param; |
| /** |
| * This parameter controls the policy for retrieving frames from AP while the |
| * STA is in sleep state. |
| * |
| * Only takes affect if the sta_ps_mode is enabled |
| */ |
| enum wmi_sta_ps_param_rx_wake_policy { |
| /* Wake up when ever there is an RX activity on the VDEV. In this mode |
| * the Power save SM(state machine) will come out of sleep by either |
| * sending null frame (or) a data frame (with PS==0) in response to TIM |
| * bit set in the received beacon frame from AP. |
| */ |
| WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, |
| |
| /* Here the power save state machine will not wakeup in response to TIM |
| * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD |
| * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all |
| * access categories are delivery-enabled, the station will send a UAPSD |
| * trigger frame, otherwise it will send a PS-Poll. |
| */ |
| WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, |
| }; |
| |
| /** Number of tx frames/beacon that cause the power save SM to wake up. |
| * |
| * Value 1 causes the SM to wake up for every TX. Value 0 has a special |
| * meaning, It will cause the SM to never wake up. This is useful if you want |
| * to keep the system to sleep all the time for some kind of test mode . host |
| * can change this parameter any time. It will affect at the next tx frame. |
| */ |
| enum wmi_sta_ps_param_tx_wake_threshold { |
| WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, |
| WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, |
| |
| /* Values greater than one indicate that many TX attempts per beacon |
| * interval before the STA will wake up |
| */ |
| }; |
| |
| /** |
| * The maximum number of PS-Poll frames the FW will send in response to |
| * traffic advertised in TIM before waking up (by sending a null frame with PS |
| * = 0). Value 0 has a special meaning: there is no maximum count and the FW |
| * will send as many PS-Poll as are necessary to retrieve buffered BU. This |
| * parameter is used when the RX wake policy is |
| * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake |
| * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. |
| */ |
| enum wmi_sta_ps_param_pspoll_count { |
| WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, |
| /* Values greater than 0 indicate the maximum numer of PS-Poll frames FW |
| * will send before waking up. |
| */ |
| }; |
| |
| /* |
| * This will include the delivery and trigger enabled state for every AC. |
| * This is the negotiated state with AP. The host MLME needs to set this based |
| * on AP capability and the state Set in the association request by the |
| * station MLME.Lower 8 bits of the value specify the UAPSD configuration. |
| */ |
| #define WMI_UAPSD_AC_TYPE_DELI 0 |
| #define WMI_UAPSD_AC_TYPE_TRIG 1 |
| |
| #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ |
| do { \ |
| (type == WMI_UAPSD_AC_TYPE_DELI) ? (1<<(ac<<1)) : \ |
| (1<<((ac<<1)+1)) \ |
| } while (0) |
| |
| enum wmi_sta_ps_param_uapsd { |
| WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), |
| WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), |
| WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), |
| WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), |
| WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), |
| WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), |
| WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), |
| WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), |
| }; |
| |
| enum wmi_sta_powersave_param { |
| /** |
| * Controls how frames are retrievd from AP while STA is sleeping |
| * |
| * (see enum wmi_sta_ps_param_rx_wake_policy) |
| */ |
| WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, |
| |
| /** |
| * The STA will go active after this many TX |
| * |
| * (see enum wmi_sta_ps_param_tx_wake_threshold) |
| */ |
| WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, |
| |
| /** |
| * Number of PS-Poll to send before STA wakes up |
| * |
| * (see enum wmi_sta_ps_param_pspoll_count) |
| * |
| */ |
| WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, |
| |
| /** |
| * TX/RX inactivity time in msec before going to sleep. |
| * |
| * The power save SM will monitor tx/rx activity on the VDEV, if no |
| * activity for the specified msec of the parameter the Power save SM will |
| * go to sleep. |
| */ |
| WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, |
| |
| /** |
| * Set uapsd configuration. |
| * |
| * (see enum wmi_sta_ps_param_uapsd) |
| */ |
| WMI_STA_PS_PARAM_UAPSD = 4, |
| /** |
| * Number of PS-Poll to send before STA wakes up in QPower Mode |
| */ |
| WMI_STA_PS_PARAM_QPOWER_PSPOLL_COUNT = 5, |
| |
| /** |
| * Enable QPower |
| */ |
| WMI_STA_PS_ENABLE_QPOWER = 6, |
| |
| /** |
| * Number of TX frames before the entering the Active state |
| */ |
| WMI_STA_PS_PARAM_QPOWER_MAX_TX_BEFORE_WAKE = 7, |
| |
| /** |
| * QPower SPEC PSPOLL interval |
| */ |
| WMI_STA_PS_PARAM_QPOWER_SPEC_PSPOLL_WAKE_INTERVAL = 8, |
| |
| /** |
| * Max SPEC PSPOLL to be sent when the PSPOLL response has |
| * no-data bit set |
| */ |
| WMI_STA_PS_PARAM_QPOWER_SPEC_MAX_SPEC_NODATA_PSPOLL = 9, |
| }; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_sta_powersave_param_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** station power save parameter (see enum wmi_sta_powersave_param) */ |
| A_UINT32 param; |
| A_UINT32 value; |
| } wmi_sta_powersave_param_cmd_fixed_param; |
| |
| /** No MIMO power save */ |
| #define WMI_STA_MIMO_PS_MODE_DISABLE |
| /** mimo powersave mode static*/ |
| #define WMI_STA_MIMO_PS_MODE_STATIC |
| /** mimo powersave mode dynamic */ |
| #define WMI_STA_MIMO_PS_MODE_DYNAMI |
| |
| typedef struct { |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** mimo powersave mode as defined above */ |
| A_UINT32 mimo_pwrsave_mode; |
| } wmi_sta_mimo_ps_mode_cmd; |
| |
| /** U-APSD configuration of peer station from (re)assoc request and TSPECs */ |
| enum wmi_ap_ps_param_uapsd { |
| WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), |
| WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), |
| WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), |
| WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), |
| WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), |
| WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), |
| WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), |
| WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), |
| }; |
| |
| /** U-APSD maximum service period of peer station */ |
| enum wmi_ap_ps_peer_param_max_sp { |
| WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, |
| WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, |
| WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, |
| WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, |
| |
| /* keep last! */ |
| MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, |
| }; |
| |
| /** |
| * AP power save parameter |
| * Set a power save specific parameter for a peer station |
| */ |
| enum wmi_ap_ps_peer_param { |
| /** Set uapsd configuration for a given peer. |
| * |
| * This will include the delivery and trigger enabled state for every AC. |
| * The host MLME needs to set this based on AP capability and stations |
| * request Set in the association request received from the station. |
| * |
| * Lower 8 bits of the value specify the UAPSD configuration. |
| * |
| * (see enum wmi_ap_ps_param_uapsd) |
| * The default value is 0. |
| */ |
| WMI_AP_PS_PEER_PARAM_UAPSD = 0, |
| |
| /** |
| * Set the service period for a UAPSD capable station |
| * |
| * The service period from wme ie in the (re)assoc request frame. |
| * |
| * (see enum wmi_ap_ps_peer_param_max_sp) |
| */ |
| WMI_AP_PS_PEER_PARAM_MAX_SP = 1, |
| |
| /** Time in seconds for aging out buffered frames for STA in power save */ |
| WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, |
| /** Specify frame types that are considered SIFS RESP trigger frame */ |
| WMI_AP_PS_PEER_PARAM_SIFS_RESP_FRMTYPE = 3, |
| |
| /* |
| * Specifies the trigger state of TID. |
| * Valid only for UAPSD frame type |
| */ |
| WMI_AP_PS_PEER_PARAM_SIFS_RESP_UAPSD = 4, |
| |
| /** Specifies the WNM sleep state of a STA */ |
| WMI_AP_PS_PEER_PARAM_WNM_SLEEP = 5, |
| }; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ap_ps_peer_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** AP powersave param (see enum wmi_ap_ps_peer_param) */ |
| A_UINT32 param; |
| /** AP powersave param value */ |
| A_UINT32 value; |
| } wmi_ap_ps_peer_cmd_fixed_param; |
| |
| /** Configure peer station 11v U-APSD coexistance |
| * |
| * Two parameters from uaspd coexistence ie info (as specified in 11v) are |
| * sent down to FW along with this command. |
| * |
| * The semantics of these fields are described in the following text extracted |
| * from 802.11v. |
| * |
| * --- If the non-AP STA specified a non-zero TSF 0 Offset value in the |
| * U-APSD Coexistence element, the AP should not transmit frames to the |
| * non-AP STA outside of the U-APSD Coexistence Service Period, which |
| * begins when the AP receives the U-APSD trigger frame and ends after |
| * the transmission period specified by the result of the following |
| * calculation: |
| * |
| * End of transmission period = T + (Interval . ((T . TSF 0 Offset) mod Interval)) |
| * |
| * Where T is the time the U-APSD trigger frame was received at the AP |
| * Interval is the UAPSD Coexistence element Duration/Interval field |
| * value (see 7.3.2.91) or upon the successful transmission of a frame |
| * with EOSP bit set to 1, whichever is earlier. |
| * |
| * |
| * --- If the non-AP STA specified a zero TSF 0 Offset value in the U-APSD |
| * Coexistence element, the AP should not transmit frames to the non-AP |
| * STA outside of the U-APSD Coexistence Service Period, which begins |
| * when the AP receives a U-APSD trigger frame and ends after the |
| * transmission period specified by the result of the following |
| * calculation: End of transmission period = T + Duration |
| */ |
| typedef struct { |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** Enable U-APSD coexistence support for this peer |
| * |
| * 0 -> disabled (default) |
| * 1 -> enabled |
| */ |
| A_UINT32 enabled; |
| /** Duration/Interval as defined by 11v U-ASPD coexistance */ |
| A_UINT32 duration_interval; |
| /** Upper 32 bits of 64-bit TSF offset */ |
| A_UINT32 tsf_offset_high; |
| /** Lower 32 bits of 64-bit TSF offset */ |
| A_UINT32 tsf_offset_low; |
| } wmi_ap_powersave_peer_uapsd_coex_cmd; |
| |
| typedef enum { |
| WMI_AP_PS_EGAP_F_ENABLE_PHYERR_DETECTION = 0x0001, |
| WMI_AP_PS_EGAP_F_ENABLE_PWRSAVE_BY_PS_STATE = 0x0002, |
| WMI_AP_PS_EGAP_F_ENABLE_PWRSAVE_BY_INACTIVITY = 0x0004, |
| |
| WMI_AP_PS_EGAP_FLAG_MAX = 0x8000 |
| } wmi_ap_ps_egap_flag_type; |
| |
| /** |
| * configure ehanced green ap parameters |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * wmi_ap_powersave_egap_param_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Enable enhanced green ap |
| * 0 -> disabled |
| * 1 -> enabled |
| */ |
| A_UINT32 enable; |
| /** The param indicates a duration that all STAs connected |
| * to S-AP have no traffic. |
| */ |
| A_UINT32 inactivity_time; /* in unit of milliseconds */ |
| /** The param indicates a duration that all STAs connected |
| * to S-AP have no traffic, after all STAs have entered powersave. |
| */ |
| A_UINT32 wait_time; /* in unit of milliseconds */ |
| /** The param is used to turn on/off some functions within E-GAP. |
| */ |
| A_UINT32 flags; /* wmi_ap_ps_egap_flag_type bitmap */ |
| } wmi_ap_ps_egap_param_cmd_fixed_param; |
| |
| typedef enum { |
| WMI_AP_PS_EGAP_STATUS_IDLE = 1, |
| WMI_AP_PS_EGAP_STATUS_PWRSAVE_OFF = 2, |
| WMI_AP_PS_EGAP_STATUS_PWRSAVE_ON = 3, |
| |
| WMI_AP_PS_EGAP_STATUS_MAX = 15 |
| } wmi_ap_ps_egap_status_type; |
| |
| /** |
| * send ehanced green ap status to host |
| */ |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ap_ps_egap_info_chainmask_list |
| */ |
| A_UINT32 tlv_header; |
| union { |
| /* OBSOLETE - will be removed once all refs are gone */ |
| A_UINT32 mac_id; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| }; |
| /** The param indicates the current tx chainmask with the mac id. */ |
| A_UINT32 tx_chainmask; |
| /** The param indicates the current rx chainmask with the mac id. */ |
| A_UINT32 rx_chainmask; |
| } wmi_ap_ps_egap_info_chainmask_list; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * wmi_ap_powersave_egap_param_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Enhanced green ap status (WMI_AP_PS_EGAP_STATUS). */ |
| A_UINT32 status; |
| /* This TLV is followed by |
| * wmi_ap_ps_egap_info_chainmask_list chainmask_list[]; |
| */ |
| } wmi_ap_ps_egap_info_event_fixed_param; |
| |
| |
| /* 128 clients = 4 words */ |
| /* WMI_TIM_BITMAP_ARRAY_SIZE can't be modified without breaking the compatibility */ |
| #define WMI_TIM_BITMAP_ARRAY_SIZE 4 |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tim_info */ |
| /** TIM bitmap len (in bytes)*/ |
| A_UINT32 tim_len; |
| /** TIM Partial Virtual Bitmap */ |
| A_UINT32 tim_mcast; |
| A_UINT32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; |
| A_UINT32 tim_changed; |
| A_UINT32 tim_num_ps_pending; |
| } wmi_tim_info; |
| |
| typedef struct { |
| /** Flag to enable quiet period IE support */ |
| A_UINT32 is_enabled; |
| /** Quiet start */ |
| A_UINT32 tbttcount; |
| /** Beacon intervals between quiets*/ |
| A_UINT32 period; |
| /** TUs of each quiet*/ |
| A_UINT32 duration; |
| /** TUs of from TBTT of quiet start*/ |
| A_UINT32 offset; |
| } wmi_quiet_info; |
| |
| /* WMI_P2P_MAX_NOA_DESCRIPTORS can't be modified without breaking the compatibility */ |
| #define WMI_P2P_MAX_NOA_DESCRIPTORS 4 /* Maximum number of NOA Descriptors supported */ |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_p2p_noa_info */ |
| /** Bit 0: Flag to indicate an update in NOA schedule |
| * Bits 7-1: Reserved |
| * Bits 15-8: Index (identifies the instance of NOA sub element) |
| * Bit 16: Opp PS state of the AP |
| * Bits 23-17: Ctwindow in TUs |
| * Bits 31-24: Number of NOA descriptors |
| */ |
| A_UINT32 noa_attributes; |
| wmi_p2p_noa_descriptor |
| noa_descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; |
| } wmi_p2p_noa_info; |
| |
| #define WMI_UNIFIED_NOA_ATTR_MODIFIED 0x1 |
| #define WMI_UNIFIED_NOA_ATTR_MODIFIED_S 0 |
| |
| #define WMI_UNIFIED_NOA_ATTR_IS_MODIFIED(hdr) \ |
| WMI_F_MS((hdr)->noa_attributes, WMI_UNIFIED_NOA_ATTR_MODIFIED) |
| |
| #define WMI_UNIFIED_NOA_ATTR_MODIFIED_SET(hdr) \ |
| WMI_F_RMW((hdr)->noa_attributes, 0x1, \ |
| WMI_UNIFIED_NOA_ATTR_MODIFIED); |
| |
| #define WMI_UNIFIED_NOA_ATTR_INDEX 0xff00 |
| #define WMI_UNIFIED_NOA_ATTR_INDEX_S 8 |
| |
| #define WMI_UNIFIED_NOA_ATTR_INDEX_GET(hdr) \ |
| WMI_F_MS((hdr)->noa_attributes, WMI_UNIFIED_NOA_ATTR_INDEX) |
| |
| #define WMI_UNIFIED_NOA_ATTR_INDEX_SET(hdr, v) \ |
| WMI_F_RMW((hdr)->noa_attributes, (v) & 0xff, \ |
| WMI_UNIFIED_NOA_ATTR_INDEX); |
| |
| #define WMI_UNIFIED_NOA_ATTR_OPP_PS 0x10000 |
| #define WMI_UNIFIED_NOA_ATTR_OPP_PS_S 16 |
| |
| #define WMI_UNIFIED_NOA_ATTR_OPP_PS_GET(hdr) \ |
| WMI_F_MS((hdr)->noa_attributes, WMI_UNIFIED_NOA_ATTR_OPP_PS) |
| |
| #define WMI_UNIFIED_NOA_ATTR_OPP_PS_SET(hdr) \ |
| WMI_F_RMW((hdr)->noa_attributes, 0x1, \ |
| WMI_UNIFIED_NOA_ATTR_OPP_PS); |
| |
| #define WMI_UNIFIED_NOA_ATTR_CTWIN 0xfe0000 |
| #define WMI_UNIFIED_NOA_ATTR_CTWIN_S 17 |
| |
| #define WMI_UNIFIED_NOA_ATTR_CTWIN_GET(hdr) \ |
| WMI_F_MS((hdr)->noa_attributes, WMI_UNIFIED_NOA_ATTR_CTWIN) |
| |
| #define WMI_UNIFIED_NOA_ATTR_CTWIN_SET(hdr, v) \ |
| WMI_F_RMW((hdr)->noa_attributes, (v) & 0x7f, \ |
| WMI_UNIFIED_NOA_ATTR_CTWIN); |
| |
| #define WMI_UNIFIED_NOA_ATTR_NUM_DESC 0xff000000 |
| #define WMI_UNIFIED_NOA_ATTR_NUM_DESC_S 24 |
| |
| #define WMI_UNIFIED_NOA_ATTR_NUM_DESC_GET(hdr) \ |
| WMI_F_MS((hdr)->noa_attributes, WMI_UNIFIED_NOA_ATTR_NUM_DESC) |
| |
| #define WMI_UNIFIED_NOA_ATTR_NUM_DESC_SET(hdr, v) \ |
| WMI_F_RMW((hdr)->noa_attributes, (v) & 0xff, \ |
| WMI_UNIFIED_NOA_ATTR_NUM_DESC); |
| |
| typedef struct { |
| /** TIM info */ |
| wmi_tim_info tim_info; |
| /** P2P NOA info */ |
| wmi_p2p_noa_info p2p_noa_info; |
| /* TBD: More info elements to be added later */ |
| } wmi_bcn_info; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_host_swba_event_fixed_param */ |
| /** bitmap identifying the VDEVs, generated by the caller */ |
| A_UINT32 vdev_map; |
| /* This TLV is followed by tim_info and p2p_noa_info for each vdev in vdevmap : |
| * wmi_tim_info tim_info[]; |
| * wmi_p2p_noa_info p2p_noa_info[]; |
| * |
| */ |
| } wmi_host_swba_event_fixed_param; |
| |
| #define WMI_MAX_AP_VDEV 16 |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tbtt_offset_event_fixed_param */ |
| /** bimtap of VDEVs that has tbtt offset updated */ |
| A_UINT32 vdev_map; |
| /* The TLVs for tbttoffset_list will follow this TLV. |
| * tbtt offset list in the order of the LSB to MSB in the vdev_map bitmap |
| * A_UINT32 tbttoffset_list[WMI_MAX_AP_VDEV]; |
| */ |
| } wmi_tbtt_offset_event_fixed_param; |
| |
| /* Peer Specific commands and events */ |
| |
| typedef struct { |
| A_UINT32 percentage; /* in unit of 12.5% */ |
| A_UINT32 min_delta; /* in unit of Mbps */ |
| } rate_delta_t; |
| |
| #define PEER_RATE_REPORT_COND_FLAG_DELTA 0x01 |
| #define PEER_RATE_REPORT_COND_FLAG_THRESHOLD 0x02 |
| #define MAX_NUM_OF_RATE_THRESH 4 |
| |
| typedef struct { |
| /* |
| * PEER_RATE_REPORT_COND_FLAG_DELTA, |
| * PEER_RATE_REPORT_COND_FLAG_THRESHOLD |
| * Any of these two conditions or both of |
| * them can be set. |
| */ |
| A_UINT32 val_cond_flags; |
| rate_delta_t rate_delta; |
| /* |
| * In unit of Mbps. There are at most 4 thresholds |
| * If the threshold count is less than 4, set zero to |
| * the one following the last threshold |
| */ |
| A_UINT32 rate_threshold[MAX_NUM_OF_RATE_THRESH]; |
| } report_cond_per_phy_t; |
| |
| |
| enum peer_rate_report_cond_phy_type { |
| PEER_RATE_REPORT_COND_11B = 0, |
| PEER_RATE_REPORT_COND_11A_G, |
| PEER_RATE_REPORT_COND_11N, |
| PEER_RATE_REPORT_COND_11AC, |
| PEER_RATE_REPORT_COND_MAX_NUM |
| }; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_peer_rate_report_condtion_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /* 1= enable, 0=disable */ |
| A_UINT32 enable_rate_report; |
| A_UINT32 report_backoff_time; /* in unit of msecond */ |
| A_UINT32 report_timer_period; /* in unit of msecond */ |
| /* |
| *In the following field, the array index means the phy type, |
| * please see enum peer_rate_report_cond_phy_type for detail |
| */ |
| report_cond_per_phy_t cond_per_phy[PEER_RATE_REPORT_COND_MAX_NUM]; |
| } wmi_peer_set_rate_report_condition_fixed_param; |
| |
| /* Peer Type: |
| * NB: This can be left DEFAULT for the normal case, and f/w will determine BSS type based |
| * on address and vdev opmode. This is largely here to allow host to indicate that |
| * peer is explicitly a TDLS peer |
| */ |
| enum wmi_peer_type { |
| WMI_PEER_TYPE_DEFAULT = 0, /* Generic/Non-BSS/Self Peer */ |
| WMI_PEER_TYPE_BSS = 1, /* Peer is BSS Peer entry */ |
| WMI_PEER_TYPE_TDLS = 2, /* Peer is a TDLS Peer */ |
| WMI_PEER_TYPE_OCB = 3, /* Peer is a OCB Peer */ |
| WMI_PEER_TYPE_NAN_DATA = 4, /* Peer is NAN DATA */ |
| WMI_PEER_TYPE_HOST_MAX = 127, /* Host <-> Target Peer type |
| * is assigned up to 127 */ |
| /* Reserved from 128 - 255 for |
| * target internal use.*/ |
| WMI_PEER_TYPE_ROAMOFFLOAD_TEMP = 128, /* Temporarily created during offload roam */ |
| }; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_create_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** peer type: see enum values above */ |
| A_UINT32 peer_type; |
| } wmi_peer_create_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_delete_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| } wmi_peer_delete_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_flush_tids_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** tid bitmap identifying the tids to flush */ |
| A_UINT32 peer_tid_bitmap; |
| } wmi_peer_flush_tids_cmd_fixed_param; |
| |
| typedef struct { |
| /** rate mode . 0: disable fixed rate (auto rate) |
| * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps |
| * 2: ht20 11n rate specified as mcs index |
| * 3: ht40 11n rate specified as mcs index |
| */ |
| A_UINT32 rate_mode; |
| /** 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) |
| * and series 3 is stored at byte 3 (MSB) */ |
| A_UINT32 rate_series; |
| /** 4 retry counts for 4 rate series. retry count for rate 0 is stored in byte 0 (LSB) |
| * and retry count for rate 3 is stored at byte 3 (MSB) */ |
| A_UINT32 rate_retries; |
| } wmi_fixed_rate; |
| |
| typedef struct { |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** fixed rate */ |
| wmi_fixed_rate peer_fixed_rate; |
| } wmi_peer_fixed_rate_cmd; |
| |
| #define WMI_MGMT_TID 17 |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_addba_clear_resp_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| } wmi_addba_clear_resp_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_addba_send_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** Tid number */ |
| A_UINT32 tid; |
| /** Buffer/Window size*/ |
| A_UINT32 buffersize; |
| } wmi_addba_send_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_delba_send_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** Tid number */ |
| A_UINT32 tid; |
| /** Is Initiator */ |
| A_UINT32 initiator; |
| /** Reason code */ |
| A_UINT32 reasoncode; |
| } wmi_delba_send_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_addba_setresponse_cmd_fixed_param */ |
| /** unique id identifying the vdev, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer mac address */ |
| wmi_mac_addr peer_macaddr; |
| /** Tid number */ |
| A_UINT32 tid; |
| /** status code */ |
| A_UINT32 statuscode; |
| } wmi_addba_setresponse_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_send_singleamsdu_cmd_fixed_param */ |
| /** unique id identifying the vdev, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer mac address */ |
| wmi_mac_addr peer_macaddr; |
| /** Tid number */ |
| A_UINT32 tid; |
| } wmi_send_singleamsdu_cmd_fixed_param; |
| |
| /* Type of Station DTIM Power Save method */ |
| enum { |
| /* For NORMAL DTIM, the parameter is the number of beacon intervals and |
| * also the same value as the listen interval. For this method, the |
| * station will wake up based on the listen interval. If this |
| * listen interval is not equal to DTIM, then the station may |
| * miss certain DTIM beacons. If this value is 1, then the |
| * station will wake up for every beacon. |
| */ |
| WMI_STA_DTIM_PS_NORMAL_DTIM = 0x01, |
| /* For MODULATED_DTIM, parameter is a multiple of DTIM beacons to skip. |
| * When this value is 1, then the station will wake at every DTIM beacon. |
| * If this value is >1, then the station will skip certain DTIM beacons. |
| * This value is the multiple of DTIM intervals that the station will |
| * wake up to receive the DTIM beacons. |
| */ |
| WMI_STA_DTIM_PS_MODULATED_DTIM = 0x02, |
| }; |
| |
| /* Parameter structure for the WMI_STA_DTIM_PS_METHOD_CMDID */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_sta_dtim_ps_method_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /* Station DTIM Power Save method as defined above */ |
| A_UINT32 dtim_pwrsave_method; |
| /* DTIM PS value. Contents depends on the method */ |
| A_UINT32 value; |
| /* Modulated DTIM value */ |
| A_UINT32 MaxLIModulatedDTIM; |
| } wmi_sta_dtim_ps_method_cmd_fixed_param; |
| |
| /* |
| * For Station UAPSD Auto Trigger feature, the Firmware monitors the |
| * uAPSD uplink and downlink traffic for each uAPSD enabled WMM ACs. |
| * If there is no uplink/download for the specified service interval (field service_interval), |
| * firmware will auto generate a QOS-NULL trigger for that WMM-AP with the TID value |
| * specified in the UP (field user_priority). |
| * Firmware also monitors the responses for these QOS-NULL triggers. |
| * If the peer does not have any delivery frames, it will respond with |
| * QOS-NULL (EOSP=1). This feature of only using service interval is assumed to be mandatory for all |
| * firmware implementation. For this basic implementation, the suspend_interval and delay_interval |
| * are unused and should be set to 0. |
| * When service_interval is 0, then the firmware will not send any trigger frames. This is for |
| * certain host-based implementations that don't want this firmware offload. |
| * Note that the per-AC intervals are required for some usage scenarios. This is why the intervals |
| * are given in the array of ac_param[]. For example, Voice service interval may defaults to 20 ms |
| * and rest of the AC default to 300 ms. |
| * |
| * The service bit, WMI_STA_UAPSD_VAR_AUTO_TRIG, will indicate that the more advanced feature |
| * of variable auto trigger is supported. The suspend_interval and delay_interval is used in |
| * the more advanced monitoring method. |
| * If the PEER does not have any delivery enabled data frames (non QOS-NULL) for the |
| * suspend interval (field suspend_interval), firmware will change its auto trigger interval |
| * to delay interval (field delay_interval). This way, when there is no traffic, the station |
| * will save more power by waking up less and sending less trigger frames. |
| * The (service_interval < suspend_interval) and (service_interval < delay_interval). |
| * If this variable auto trigger is not required, then the suspend_interval and delay_interval |
| * should be 0. |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_sta_uapsd_auto_trig_param */ |
| /** WMM Access category from 0 to 3 */ |
| A_UINT32 wmm_ac; |
| /** User priority to use in trigger frames. It is the TID |
| * value. This field needs to be specified and may not be |
| * equivalent to AC since some implementation may use the TSPEC |
| * to enable UAPSD and negotiate a particular user priority. */ |
| A_UINT32 user_priority; |
| /** service interval in ms */ |
| A_UINT32 service_interval; |
| /** Suspend interval in ms */ |
| A_UINT32 suspend_interval; |
| /** delay interval in ms */ |
| A_UINT32 delay_interval; |
| } wmi_sta_uapsd_auto_trig_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_sta_uapsd_auto_trig_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer mac address */ |
| wmi_mac_addr peer_macaddr; |
| /** Number of AC to specify */ |
| A_UINT32 num_ac; |
| /* |
| * Following this struc is the TLV: |
| * wmi_sta_uapsd_auto_trig_param ac_param[]; //Variable number of AC parameters (defined by field num_ac) |
| */ |
| |
| } wmi_sta_uapsd_auto_trig_cmd_fixed_param; |
| |
| /** mimo powersave state */ |
| #define WMI_PEER_MIMO_PS_STATE 0x1 |
| /** enable/disable AMPDU . initial value (enabled) */ |
| #define WMI_PEER_AMPDU 0x2 |
| /** authorize/unauthorize peer. initial value is unauthorized (0) */ |
| #define WMI_PEER_AUTHORIZE 0x3 |
| /** peer channel bandwidth */ |
| #define WMI_PEER_CHWIDTH 0x4 |
| /** peer NSS */ |
| #define WMI_PEER_NSS 0x5 |
| /** USE 4 ADDR */ |
| #define WMI_PEER_USE_4ADDR 0x6 |
| /* set group membership status */ |
| #define WMI_PEER_MEMBERSHIP 0x7 |
| #define WMI_PEER_USERPOS 0x8 |
| /* |
| * A critical high-level protocol is being used with this peer. Target |
| * should take appropriate measures (if possible) to ensure more |
| * reliable link with minimal latency. This *may* include modifying the |
| * station power save policy, enabling more RX chains, increased |
| * priority of channel scheduling, etc. |
| * |
| * NOTE: This parameter should only be considered a hint as specific |
| * behavior will depend on many factors including current network load |
| * and vdev/peer configuration. |
| * |
| * For STA VDEV this peer corresponds to the AP's BSS peer. |
| * For AP VDEV this peer corresponds to the remote peer STA. |
| */ |
| #define WMI_PEER_CRIT_PROTO_HINT_ENABLED 0x9 |
| /* set Tx failure count threshold for the peer - Currently unused */ |
| #define WMI_PEER_TX_FAIL_CNT_THR 0xA |
| /* Enable H/W retry and Enable H/W Send CTS2S before Data */ |
| #define WMI_PEER_SET_HW_RETRY_CTS2S 0xB |
| |
| /* Set peer advertised IBSS atim window length */ |
| #define WMI_PEER_IBSS_ATIM_WINDOW_LENGTH 0xC |
| |
| /** peer phy mode */ |
| #define WMI_PEER_PHYMODE 0xD |
| /** Use FIXED Pwr */ |
| #define WMI_PEER_USE_FIXED_PWR 0xE |
| /** Set peer fixed rate */ |
| #define WMI_PEER_PARAM_FIXED_RATE 0xF |
| /** Whitelist peer TIDs */ |
| #define WMI_PEER_SET_MU_WHITELIST 0x10 |
| /** Set peer max tx rate (MCS) in adaptive rate ctrl */ |
| #define WMI_PEER_SET_MAX_TX_RATE 0x11 |
| /** Set peer minimal tx rate (MCS) in adaptive rate ctrl */ |
| #define WMI_PEER_SET_MIN_TX_RATE 0x12 |
| |
| /** mimo ps values for the parameter WMI_PEER_MIMO_PS_STATE */ |
| #define WMI_PEER_MIMO_PS_NONE 0x0 |
| #define WMI_PEER_MIMO_PS_STATIC 0x1 |
| #define WMI_PEER_MIMO_PS_DYNAMIC 0x2 |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_set_param_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** parameter id */ |
| A_UINT32 param_id; |
| /** parametr value */ |
| A_UINT32 param_value; |
| } wmi_peer_set_param_cmd_fixed_param; |
| |
| typedef union { |
| /* |
| * The A_UINT16 "mode" and "tx_rate" fields can only be directly used |
| * by the target or a little-endian host. |
| * A big-endian host needs to use the WMI_PEER_MAX_MIN_TX_xxx_GET/SET |
| * macros on the A_UINT32 "value" field. |
| */ |
| struct { |
| /* 0:CCK, 1:OFDM, 2:HT, 3:VHT (see WMI_RATE_PREAMBLE) */ |
| A_UINT16 mode; |
| A_UINT16 tx_rate; /* see per-mode specs below */ |
| }; |
| A_UINT32 value; /* for use by big-endian host */ |
| } wmi_peer_max_min_tx_rate; |
| |
| /* |
| * Any access to the mode/tx_rate in an big endian system should use |
| * the below Macros on the wmi_peer_max_min_tx_rate.value field. |
| */ |
| #define WMI_PEER_MAX_MIN_TX_MODE_GET(value32) WMI_GET_BITS(value32, 0, 16) |
| #define WMI_PEER_MAX_MIN_TX_MODE_SET(value32, tx_mode) WMI_SET_BITS(value32, 0, 16, tx_mode) |
| |
| #define WMI_PEER_MAX_MIN_TX_RATE_GET(value32) WMI_GET_BITS(value32, 16, 16) |
| #define WMI_PEER_MAX_MIN_TX_RATE_SET(value32, tx_mode) WMI_SET_BITS(value32, 16, 16, tx_mode) |
| |
| /* |
| * CCK max/min tx Rate description |
| * tx_rate = 0: 1Mbps, |
| * tx_rate = 1: 2Mbps |
| * tx_rate = 2: 5.5Mbps |
| * tx_rate = 3: 11Mbps |
| * tx_rate = else : invalid. |
| */ |
| #define WMI_MAX_CCK_TX_RATE 0x03 |
| |
| /* |
| * OFDM max/min tx Rate description |
| * tx_rate = 0: 6Mbps, |
| * tx_rate = 1: 9Mbps |
| * tx_rate = 2: 12Mbps |
| * tx_rate = 3: 18Mbps |
| * tx_rate = 4: 24Mbps |
| * tx_rate = 5: 32Mbps |
| * tx_rate = 6: 48Mbps |
| * tx_rate = 7: 54Mbps |
| * tx_rate = else : invalid. |
| */ |
| #define WMI_MAX_OFDM_TX_RATE 0x07 |
| |
| /* |
| * HT max/min tx rate description |
| * tx_rate = 0~7 : MCS Rate 0~7 |
| * tx_rate=else : invalid. |
| */ |
| #define WMI_MAX_HT_TX_MCS 0x07 |
| |
| /* |
| * VHT max/min tx rate description |
| * tx_rate = 0~9 : MCS Rate 0~9 |
| * tx_rate=else : invalid. |
| */ |
| #define WMI_MAX_VHT_TX_MCS 0x09 |
| |
| #define MAX_SUPPORTED_RATES 128 |
| |
| typedef struct { |
| /** total number of rates */ |
| A_UINT32 num_rates; |
| /** |
| * rates (each 8bit value) packed into a 32 bit word. |
| * the rates are filled from least significant byte to most |
| * significant byte. |
| */ |
| A_UINT32 rates[(MAX_SUPPORTED_RATES / 4) + 1]; |
| } wmi_rate_set; |
| |
| /* NOTE: It would bea good idea to represent the Tx MCS |
| * info in one word and Rx in another word. This is split |
| * into multiple words for convenience |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vht_rate_set */ |
| A_UINT32 rx_max_rate; /* Max Rx data rate */ |
| A_UINT32 rx_mcs_set; /* Negotiated RX VHT rates */ |
| A_UINT32 tx_max_rate; /* Max Tx data rate */ |
| A_UINT32 tx_mcs_set; /* Negotiated TX VHT rates */ |
| A_UINT32 tx_max_mcs_nss; /* b0-b3: max mcs idx; b4-b7: max nss */ |
| } wmi_vht_rate_set; |
| |
| /* |
| * IMPORTANT: Make sure the bit definitions here are consistent |
| * with the ni_flags definitions in wlan_peer.h |
| */ |
| #define WMI_PEER_AUTH 0x00000001 /* Authorized for data */ |
| #define WMI_PEER_QOS 0x00000002 /* QoS enabled */ |
| #define WMI_PEER_NEED_PTK_4_WAY 0x00000004 /* Needs PTK 4 way handshake for authorization */ |
| #define WMI_PEER_NEED_GTK_2_WAY 0x00000010 /* Needs GTK 2 way handshake after 4-way handshake */ |
| #define WMI_PEER_APSD 0x00000800 /* U-APSD power save enabled */ |
| #define WMI_PEER_HT 0x00001000 /* HT enabled */ |
| #define WMI_PEER_40MHZ 0x00002000 /* 40MHz enabld */ |
| #define WMI_PEER_STBC 0x00008000 /* STBC Enabled */ |
| #define WMI_PEER_LDPC 0x00010000 /* LDPC ENabled */ |
| #define WMI_PEER_DYN_MIMOPS 0x00020000 /* Dynamic MIMO PS Enabled */ |
| #define WMI_PEER_STATIC_MIMOPS 0x00040000 /* Static MIMO PS enabled */ |
| #define WMI_PEER_SPATIAL_MUX 0x00200000 /* SM Enabled */ |
| #define WMI_PEER_VHT 0x02000000 /* VHT Enabled */ |
| #define WMI_PEER_80MHZ 0x04000000 /* 80MHz enabld */ |
| #define WMI_PEER_PMF 0x08000000 /* Robust Management Frame Protection enabled */ |
| /** CAUTION TODO: Place holder for WLAN_PEER_F_PS_PRESEND_REQUIRED = 0x10000000. Need to be clean up */ |
| #define WMI_PEER_IS_P2P_CAPABLE 0x20000000 /* P2P capable peer */ |
| #define WMI_PEER_160MHZ 0x40000000 /* 160 MHz enabled */ |
| #define WMI_PEER_SAFEMODE_EN 0x80000000 /* Fips Mode Enabled */ |
| |
| /** |
| * Peer rate capabilities. |
| * |
| * This is of interest to the ratecontrol |
| * module which resides in the firmware. The bit definitions are |
| * consistent with that defined in if_athrate.c. |
| * |
| * @todo |
| * Move this to a common header file later so there is no need to |
| * duplicate the definitions or maintain consistency. |
| */ |
| #define WMI_RC_DS_FLAG 0x01 /* Dual stream flag */ |
| #define WMI_RC_CW40_FLAG 0x02 /* CW 40 */ |
| #define WMI_RC_SGI_FLAG 0x04 /* Short Guard Interval */ |
| #define WMI_RC_HT_FLAG 0x08 /* HT */ |
| #define WMI_RC_RTSCTS_FLAG 0x10 /* RTS-CTS */ |
| #define WMI_RC_TX_STBC_FLAG 0x20 /* TX STBC */ |
| #define WMI_RC_TX_STBC_FLAG_S 5 /* TX STBC */ |
| #define WMI_RC_RX_STBC_FLAG 0xC0 /* RX STBC ,2 bits */ |
| #define WMI_RC_RX_STBC_FLAG_S 6 /* RX STBC ,2 bits */ |
| #define WMI_RC_WEP_TKIP_FLAG 0x100 /* WEP/TKIP encryption */ |
| #define WMI_RC_TS_FLAG 0x200 /* Three stream flag */ |
| #define WMI_RC_UAPSD_FLAG 0x400 /* UAPSD Rate Control */ |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_assoc_complete_cmd_fixed_param */ |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** VDEV id */ |
| A_UINT32 vdev_id; |
| /** assoc = 1 reassoc = 0 */ |
| A_UINT32 peer_new_assoc; |
| /** peer associd (16 bits) */ |
| A_UINT32 peer_associd; |
| /** peer station flags: see definition above */ |
| A_UINT32 peer_flags; |
| /** negotiated capabilities (lower 16 bits)*/ |
| A_UINT32 peer_caps; |
| /** Listen interval */ |
| A_UINT32 peer_listen_intval; |
| /** HT capabilties of the peer */ |
| A_UINT32 peer_ht_caps; |
| /** maximum rx A-MPDU length */ |
| A_UINT32 peer_max_mpdu; |
| /** mpdu density of the peer in usec(0 to 16) */ |
| A_UINT32 peer_mpdu_density; |
| /** peer rate capabilties see flags above */ |
| A_UINT32 peer_rate_caps; |
| /** num spatial streams */ |
| A_UINT32 peer_nss; |
| /** VHT capabilties of the peer */ |
| A_UINT32 peer_vht_caps; |
| /** phy mode */ |
| A_UINT32 peer_phymode; |
| /** HT Operation Element of the peer. Five bytes packed in 2 |
| * INT32 array and filled from lsb to msb. |
| * Note that the size of array peer_ht_info[] cannotbe changed |
| * without breaking WMI Compatibility. */ |
| A_UINT32 peer_ht_info[2]; |
| /** total number of negotiated legacy rate set. Also the sizeof |
| * peer_legacy_rates[] */ |
| A_UINT32 num_peer_legacy_rates; |
| /** total number of negotiated ht rate set. Also the sizeof |
| * peer_ht_rates[] */ |
| A_UINT32 num_peer_ht_rates; |
| /** |
| * Bitmap providing QCA proprietary mapping of bandwidths to max Rx NSS |
| * for this peer. |
| * This is required since 802.11 standard currently facilitates peer to |
| * be able to advertise only a single max Rx NSS value across all |
| * bandwidths. |
| * Some QCA chipsets might need to be able to advertise a different max |
| * Rx NSS value for 160 MHz, than that for 80 MHz and lower. |
| * |
| * bit[2:0] : Represents value of Rx NSS for VHT 160 MHz |
| * bit[30:3]: Reserved |
| * bit[31] : MSB(0/1): 1 in case of valid data else all bits will be |
| * set to 0 by host |
| */ |
| A_UINT32 peer_bw_rxnss_override; |
| /* 802.11ax capabilities */ |
| wmi_ppe_threshold peer_ppet; |
| /* protocol-defined HE / 11ax capability flags */ |
| A_UINT32 peer_he_cap_info; |
| A_UINT32 peer_he_ops; /* HE operation contains BSS color */ |
| /* Following this struc are the TLV's: |
| * A_UINT8 peer_legacy_rates[]; |
| * A_UINT8 peer_ht_rates[]; |
| * wmi_vht_rate_set peer_vht_rates; //VHT capabilties of the peer |
| */ |
| } wmi_peer_assoc_complete_cmd_fixed_param; |
| |
| /* WDS Entry Flags */ |
| #define WMI_WDS_FLAG_STATIC 0x1 /* Disable aging & learning */ |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_add_wds_entry_cmd_fixed_param */ |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** wds MAC addr */ |
| wmi_mac_addr wds_macaddr; |
| /* Flags associated with WDS entry - see WMI_WDS_FLAG defs */ |
| A_UINT32 flags; |
| A_UINT32 vdev_id; |
| } wmi_peer_add_wds_entry_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_remove_wds_entry_cmd_fixed_param */ |
| /** wds MAC addr */ |
| wmi_mac_addr wds_macaddr; |
| A_UINT32 vdev_id; |
| } wmi_peer_remove_wds_entry_cmd_fixed_param; |
| |
| typedef struct { |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| } wmi_peer_q_empty_callback_event; |
| |
| /* |
| * Command to update an already existing WDS entry. Different address setting |
| * combinations are possible. |
| * |
| * Valid wds and peer -> Associated WDS entry peer ptr & flags will be updated. |
| * Valid wds and null peer -> Associated WDS entry flags will be updated. |
| * Null wds and Valid peer-> Flags will be updated for all WDS entries |
| * behind the peer. |
| * Null wds and peer -> Flags will be updated for all WDS entries. |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_peer_update_wds_entry_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** wds MAC addr */ |
| wmi_mac_addr wds_macaddr; |
| /* Flags associated with WDS entry */ |
| A_UINT32 flags; |
| A_UINT32 vdev_id; |
| } wmi_peer_update_wds_entry_cmd_fixed_param; |
| |
| /** |
| * Channel info WMI event |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_chan_info_event_fixed_param */ |
| /** Error code */ |
| A_UINT32 err_code; |
| /** Channel freq */ |
| A_UINT32 freq; |
| /** Read flags */ |
| A_UINT32 cmd_flags; |
| /** Noise Floor value */ |
| A_UINT32 noise_floor; |
| /** rx clear count */ |
| A_UINT32 rx_clear_count; |
| /** cycle count */ |
| A_UINT32 cycle_count; |
| /** channel tx power per range in 0.5dBm steps */ |
| A_UINT32 chan_tx_pwr_range; |
| /** channel tx power per throughput */ |
| A_UINT32 chan_tx_pwr_tp; |
| /** rx frame count (cumulative) */ |
| A_UINT32 rx_frame_count; |
| } wmi_chan_info_event_fixed_param; |
| |
| /** |
| * Non wlan interference event |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_ath_dcs_cw_int */ |
| A_UINT32 channel; /* either number or freq in mhz */ |
| } wlan_dcs_cw_int; |
| #define ath_dcs_cw_int /* DEPRECATED */ wlan_dcs_cw_int /* alias */ |
| |
| /** |
| * wlan_dcs_im_tgt_stats |
| * |
| */ |
| typedef struct _wlan_dcs_im_tgt_stats { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wlan_dcs_im_tgt_stats_t |
| */ |
| A_UINT32 tlv_header; |
| /** current running TSF from the TSF-1 */ |
| A_UINT32 reg_tsf32; |
| |
| /** Known last frame rssi, in case of multiple stations, if |
| * and at different ranges, this would not gaurantee that |
| * this is the least rssi. |
| */ |
| A_UINT32 last_ack_rssi; |
| |
| /** Sum of all the failed durations in the last one second interval. |
| */ |
| A_UINT32 tx_waste_time; |
| /** count how many times the hal_rxerr_phy is marked, in this |
| * time period |
| */ |
| A_UINT32 rx_time; |
| A_UINT32 phyerr_cnt; |
| |
| /** |
| * WLAN IM stats from target to host |
| * |
| * Below statistics are sent from target to host periodically. |
| * These are collected at target as long as target is running |
| * and target chip is not in sleep. |
| * |
| */ |
| |
| /** listen time from ANI */ |
| A_INT32 listen_time; |
| |
| /** tx frame count, MAC_PCU_TX_FRAME_CNT_ADDRESS */ |
| A_UINT32 reg_tx_frame_cnt; |
| |
| /** rx frame count, MAC_PCU_RX_FRAME_CNT_ADDRESS */ |
| A_UINT32 reg_rx_frame_cnt; |
| |
| /** rx clear count, MAC_PCU_RX_CLEAR_CNT_ADDRESS */ |
| A_UINT32 reg_rxclr_cnt; |
| |
| /** total cycle counts MAC_PCU_CYCLE_CNT_ADDRESS */ |
| A_UINT32 reg_cycle_cnt; /* delta cycle count */ |
| |
| /** extenstion channel rx clear count */ |
| A_UINT32 reg_rxclr_ext_cnt; |
| |
| /** OFDM phy error counts, MAC_PCU_PHY_ERR_CNT_1_ADDRESS */ |
| A_UINT32 reg_ofdm_phyerr_cnt; |
| |
| /** CCK phy error count, MAC_PCU_PHY_ERR_CNT_2_ADDRESS */ |
| A_UINT32 reg_cck_phyerr_cnt; /* CCK err count since last reset, read from register */ |
| |
| } wlan_dcs_im_tgt_stats_t; |
| |
| /** |
| * wmi_dcs_interference_event_t |
| * |
| * Right now this is event and stats together. Partly this is |
| * because cw interference is handled in target now. This |
| * can be done at host itself, if we can carry the NF alone |
| * as a stats event. In future this would be done and this |
| * event would carry only stats. |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_dcs_interference_event_fixed_param */ |
| /** |
| * Type of the event present, either the cw interference event, or the wlan_im stats |
| */ |
| A_UINT32 interference_type; /* type of interference, wlan or cw */ |
| /* |
| * Following this struct are these TLVs. Note that they are both array of structures |
| * but can have at most one element. Which TLV is empty or has one element depends |
| * on the field interference_type. This is to emulate an union with cw_int and wlan_stat |
| * elements (not arrays). union { wlan_dcs_cw_int cw_int; |
| * wlan_dcs_im_tgt_stats_t wlan_stat; } |
| * int_event; |
| * |
| * //cw_interference event |
| * wlan_dcs_cw_int cw_int[]; this element |
| * // wlan im interfernce stats |
| * wlan_dcs_im_tgt_stats_t wlan_stat[]; |
| */ |
| } wmi_dcs_interference_event_fixed_param; |
| |
| enum wmi_peer_mcast_group_action { |
| wmi_peer_mcast_group_action_add = 0, |
| wmi_peer_mcast_group_action_del = 1 |
| }; |
| #define WMI_PEER_MCAST_GROUP_FLAG_ACTION_M 0x1 |
| #define WMI_PEER_MCAST_GROUP_FLAG_ACTION_S 0 |
| #define WMI_PEER_MCAST_GROUP_FLAG_WILDCARD_M 0x2 |
| #define WMI_PEER_MCAST_GROUP_FLAG_WILDCARD_S 1 |
| /* flag to exclude an ip while filtering.set to exclude */ |
| #define WMI_PEER_MCAST_GROUP_FLAG_SRC_FILTER_EXCLUDE_M 0x4 |
| #define WMI_PEER_MCAST_GROUP_FLAG_SRC_FILTER_EXCLUDE_S 2 |
| /* flag to say ipv4/ipv6. Will be set for ipv6 */ |
| #define WMI_PEER_MCAST_GROUP_FLAG_IPV6_M 0x8 |
| #define WMI_PEER_MCAST_GROUP_FLAG_IPV6_S 3 |
| /* delete all mcast table entries. */ |
| #define WMI_PEER_MCAST_GROUP_FLAG_DELETEALL_M 0x10 |
| #define WMI_PEER_MCAST_GROUP_FLAG_DELETEALL_S 4 |
| |
| /* multicast group membership commands */ |
| /* TODO: Converting this will be tricky since it uses an union. |
| Also, the mac_addr is not aligned. We will convert to the wmi_mac_addr */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_mcast_group_cmd_fixed_param */ |
| A_UINT32 flags; |
| wmi_mac_addr ucast_mac_addr; |
| /* |
| * for ipv4, bytes (12-15) should contain ip address and |
| * other lower bytes 0. ipv6 should have all bytes valid |
| */ |
| A_UINT8 mcast_ip_addr[16]; /* in network byte order */ |
| /* |
| * for ipv6, all 16 bytes has to be valid; |
| * for ipv4 last 4 bytes(12-15) has to be valid, rest all 0s |
| */ |
| A_UINT8 mcast_ip_mask[16]; /* zero out lower bytes if ipv4 */ |
| /* number of address filters - irrespective of ipv4/ipv6 addresses */ |
| A_UINT32 num_filter_addr; |
| /* |
| * this array should contain the src IPs that are to be filtered |
| * during find. The array should be packed. If there are 2 ipv4 |
| * addresses, there should be 8 bytes and rest all 0s |
| */ |
| A_UINT8 filter_addr[64]; /* 16 ipv4 addresses or 4 ipv6 addresses */ |
| A_UINT8 vdev_id; /* vdev of this mcast group */ |
| } wmi_peer_mcast_group_cmd_fixed_param; |
| |
| /** Offload Scan and Roaming related commands */ |
| /** The FW performs 2 different kinds of offload scans independent |
| * of host. One is Roam scan which is primarily performed on a |
| * station VDEV after association to look for a better AP that |
| * the station VDEV can roam to. The second scan is connect scan |
| * which is mainly performed when the station is not associated |
| * and to look for a matching AP profile from a list of |
| * configured profiles. */ |
| |
| /** |
| * WMI_ROAM_SCAN_MODE: Set Roam Scan mode |
| * the roam scan mode is one of the periodic, rssi change, both, none. |
| * None : Disable Roam scan. No Roam scan at all. |
| * Periodic : Scan periodically with a configurable period. |
| * Rssi change : Scan when ever rssi to current AP changes by the threshold value |
| * set by WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD command. |
| * Both : Both of the above (scan when either period expires or rss to current AP changes by X amount) |
| * |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_scan_mode_fixed_param */ |
| A_UINT32 roam_scan_mode; |
| A_UINT32 vdev_id; |
| } wmi_roam_scan_mode_fixed_param; |
| |
| #define WMI_ROAM_SCAN_MODE_NONE 0x0 |
| #define WMI_ROAM_SCAN_MODE_PERIODIC 0x1 |
| #define WMI_ROAM_SCAN_MODE_RSSI_CHANGE 0x2 |
| #define WMI_ROAM_SCAN_MODE_BOTH 0x3 |
| /* Note: WMI_ROAM_SCAN_MODE_ROAMOFFLOAD is one bit not conflict with LFR2.0 SCAN_MODE. */ |
| #define WMI_ROAM_SCAN_MODE_ROAMOFFLOAD 0x4 |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_scan_cmd_fixed_param */ |
| A_UINT32 vdev_id; |
| A_UINT32 command_arg; |
| } wmi_roam_scan_cmd_fixed_param; |
| |
| #define WMI_ROAM_SCAN_STOP_CMD 0x1 |
| |
| /** |
| * WMI_ROAM_SCAN_RSSI_THRESHOLD : set scan rssi thresold |
| * scan rssi threshold is the rssi threshold below which the FW will start running Roam scans. |
| * Applicable when WMI_ROAM_SCAN_MODE is not set to none. |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_scan_rssi_threshold_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** roam scan rssi threshold */ |
| A_UINT32 roam_scan_rssi_thresh; |
| /** When using Hw generated beacon RSSI interrupts */ |
| A_UINT32 roam_rssi_thresh_diff; |
| /** 5G scan max count */ |
| A_UINT32 hirssi_scan_max_count; |
| /** 5G scan rssi change threshold value */ |
| A_UINT32 hirssi_scan_delta; |
| /** 5G scan upper bound */ |
| A_UINT32 hirssi_upper_bound; |
| /* The TLVs will follow. |
| * wmi_roam_scan_extended_threshold_param extended_param; |
| * wmi_roam_earlystop_rssi_thres_param earlystop_param; |
| * wmi_roam_dense_thres_param dense_param; |
| */ |
| } wmi_roam_scan_rssi_threshold_fixed_param; |
| |
| #define WMI_ROAM_5G_BOOST_PENALIZE_ALGO_FIXED 0x0 |
| #define WMI_ROAM_5G_BOOST_PENALIZE_ALGO_LINEAR 0x1 |
| #define WMI_ROAM_5G_BOOST_PENALIZE_ALGO_LOG 0x2 |
| #define WMI_ROAM_5G_BOOST_PENALIZE_ALGO_EXP 0x3 |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| *WMITLV_TAG_STRUC_wmi_roam_scan_extended_threshold_param */ |
| A_UINT32 tlv_header; |
| A_UINT32 boost_threshold_5g; /** RSSI threshold above which 5GHz RSSI is favored */ |
| A_UINT32 penalty_threshold_5g; /** RSSI threshold below which 5GHz RSSI is penalized */ |
| A_UINT32 boost_algorithm_5g; /** 0 == fixed, 1 == linear, 2 == logarithm ..etc */ |
| A_UINT32 boost_factor_5g; /** factor by which 5GHz RSSI is boosted */ |
| A_UINT32 penalty_algorithm_5g; /** 0 == fixed, 1 == linear, 2 == logarithm ..etc */ |
| A_UINT32 penalty_factor_5g; /** factor by which 5GHz RSSI is penalized */ |
| A_UINT32 max_boost_5g; /** maximum boost that can be applied to a 5GHz RSSI */ |
| A_UINT32 max_penalty_5g; /** maximum penality that can be applied to a 5GHz RSSI */ |
| /** |
| * RSSI below which roam is kicked in by background scan |
| * although rssi is still good |
| */ |
| A_UINT32 good_rssi_threshold; |
| } wmi_roam_scan_extended_threshold_param; |
| |
| |
| /** |
| * WMI_ROAM_SCAN_PERIOD: period for roam scan. |
| * Applicable when the scan mode is Periodic or both. |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_scan_period_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** roam scan period value */ |
| A_UINT32 roam_scan_period; |
| /** Aging for Roam scans */ |
| A_UINT32 roam_scan_age; |
| } wmi_roam_scan_period_fixed_param; |
| |
| /** |
| * WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD : rssi delta to trigger the roam scan. |
| * Rssi change threshold used when mode is Rssi change (or) Both. |
| * The FW will run the roam scan when ever the rssi changes (up or down) by the value set by this parameter. |
| * Note scan is triggered based on the rssi threshold condition set by WMI_ROAM_SCAN_RSSI_THRESHOLD |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_scan_rssi_change_threshold_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** roam scan rssi change threshold value */ |
| A_UINT32 roam_scan_rssi_change_thresh; |
| /** When using Hw generated beacon RSSI interrupts */ |
| A_UINT32 bcn_rssi_weight; |
| /** Minimum delay between two 5G scans */ |
| A_UINT32 hirssi_delay_btw_scans; |
| } wmi_roam_scan_rssi_change_threshold_fixed_param; |
| |
| #define WMI_ROAM_SCAN_CHAN_LIST_TYPE_NONE 0x1 |
| #define WMI_ROAM_SCAN_CHAN_LIST_TYPE_STATIC 0x2 |
| #define WMI_ROAM_SCAN_CHAN_LIST_TYPE_DYNAMIC 0x3 |
| /** |
| * TLV for roaming channel list |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_chan_list_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** WMI_CHAN_LIST_TAG */ |
| A_UINT32 chan_list_type; |
| /** # if channels to scan */ |
| A_UINT32 num_chan; |
| /** |
| * TLV (tag length value ) parameters follow the wmi_roam_chan_list |
| * structure. The TLV's are: |
| * A_UINT32 channel_list[]; |
| **/ |
| } wmi_roam_chan_list_fixed_param; |
| |
| /** Authentication modes */ |
| enum { |
| WMI_AUTH_NONE, /* no upper level auth */ |
| WMI_AUTH_OPEN, /* open */ |
| WMI_AUTH_SHARED, /* shared-key */ |
| WMI_AUTH_8021X, /* 802.1x */ |
| WMI_AUTH_AUTO, /* Auto */ |
| WMI_AUTH_WPA, /* WPA */ |
| WMI_AUTH_RSNA, /* WPA2/RSNA */ |
| WMI_AUTH_CCKM, /* CCK */ |
| WMI_AUTH_WAPI, /* WAPI */ |
| WMI_AUTH_AUTO_PSK, |
| WMI_AUTH_WPA_PSK, |
| WMI_AUTH_RSNA_PSK, |
| WMI_AUTH_WAPI_PSK, |
| WMI_AUTH_FT_RSNA, /* 11r FT */ |
| WMI_AUTH_FT_RSNA_PSK, |
| WMI_AUTH_RSNA_PSK_SHA256, |
| WMI_AUTH_RSNA_8021X_SHA256, |
| }; |
| |
| typedef struct { |
| /** authentication mode (defined above) */ |
| A_UINT32 rsn_authmode; |
| /** unicast cipher set */ |
| A_UINT32 rsn_ucastcipherset; |
| /** mcast/group cipher set */ |
| A_UINT32 rsn_mcastcipherset; |
| /** mcast/group management frames cipher set */ |
| A_UINT32 rsn_mcastmgmtcipherset; |
| } wmi_rsn_params; |
| |
| /** looking for a wps enabled AP */ |
| #define WMI_AP_PROFILE_FLAG_WPS 0x1 |
| /** looking for a secure AP */ |
| #define WMI_AP_PROFILE_FLAG_CRYPTO 0x2 |
| /** looking for a PMF enabled AP */ |
| #define WMI_AP_PROFILE_FLAG_PMF 0x4 |
| |
| /** To match an open AP, the rs_authmode should be set to WMI_AUTH_NONE |
| * and WMI_AP_PROFILE_FLAG_CRYPTO should be clear. |
| * To match a WEP enabled AP, the rs_authmode should be set to WMI_AUTH_NONE |
| * and WMI_AP_PROFILE_FLAG_CRYPTO should be set . |
| */ |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ap_profile */ |
| /** flags as defined above */ |
| A_UINT32 flags; |
| /** |
| * rssi thresold value: the value of the the candidate AP should |
| * higher by this threshold than the rssi of the currrently associated AP. |
| */ |
| A_UINT32 rssi_threshold; |
| /** |
| * ssid vlaue to be matched. |
| */ |
| wmi_ssid ssid; |
| |
| /** |
| * security params to be matched. |
| */ |
| /** authentication mode (defined above) */ |
| A_UINT32 rsn_authmode; |
| /** unicast cipher set */ |
| A_UINT32 rsn_ucastcipherset; |
| /** mcast/group cipher set */ |
| A_UINT32 rsn_mcastcipherset; |
| /** mcast/group management frames cipher set */ |
| A_UINT32 rsn_mcastmgmtcipherset; |
| } wmi_ap_profile; |
| |
| /** Support early stop roaming scanning when finding a strong candidate AP |
| * A 'strong' candidate is |
| * 1) Is eligible candidate |
| * (all conditions are met in existing candidate selection). |
| * 2) Its rssi is better than earlystop threshold. |
| * Earlystop threshold will be relaxed as each channel is scanned. |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /* Minimum RSSI threshold value for early stop, unit is dB above NF. */ |
| A_UINT32 roam_earlystop_thres_min; |
| /* Maminum RSSI threshold value for early stop, unit is dB above NF. */ |
| A_UINT32 roam_earlystop_thres_max; |
| } wmi_roam_earlystop_rssi_thres_param; |
| |
| typedef struct { |
| /* TLV tag and len; |
| * tag equals WMITLV_TAG_STRUC_wmi_roam_dense_thres_param |
| */ |
| A_UINT32 tlv_header; |
| /* rssi threshold offset under trffic and dense env */ |
| A_UINT32 roam_dense_rssi_thres_offset; |
| /* minimum number of APs to determine dense env */ |
| A_UINT32 roam_dense_min_aps; |
| /* initial dense status detected by host |
| * at the time of initial connection */ |
| A_UINT32 roam_dense_status; |
| /* traffic threshold to enable aggressive roaming in dense env; |
| * units are percent of medium occupancy, 0 - 100 |
| */ |
| A_UINT32 roam_dense_traffic_thres; |
| } wmi_roam_dense_thres_param; |
| |
| /** Beacon filter wmi command info */ |
| |
| #define BCN_FLT_MAX_SUPPORTED_IES 256 |
| #define BCN_FLT_MAX_ELEMS_IE_LIST BCN_FLT_MAX_SUPPORTED_IES/32 |
| |
| typedef struct bss_bcn_stats { |
| A_UINT32 vdev_id; |
| A_UINT32 bss_bcnsdropped; |
| A_UINT32 bss_bcnsdelivered; |
| } wmi_bss_bcn_stats_t; |
| |
| typedef struct bcn_filter_stats { |
| A_UINT32 bcns_dropped; |
| A_UINT32 bcns_delivered; |
| A_UINT32 activefilters; |
| wmi_bss_bcn_stats_t bss_stats; |
| } wmi_bcnfilter_stats_t; |
| |
| typedef struct wmi_add_bcn_filter_cmd { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_add_bcn_filter_cmd_fixed_param */ |
| A_UINT32 vdev_id; |
| /* |
| * Following this structure is the TLV: |
| * A_UINT32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; |
| */ |
| } wmi_add_bcn_filter_cmd_fixed_param; |
| |
| typedef struct wmi_rmv_bcn_filter_cmd { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_rmv_bcn_filter_cmd_fixed_param */ |
| A_UINT32 vdev_id; |
| } wmi_rmv_bcn_filter_cmd_fixed_param; |
| |
| #define WMI_BCN_SEND_DTIM_ZERO 1 |
| #define WMI_BCN_SEND_DTIM_BITCTL_SET 2 |
| typedef struct wmi_bcn_send_from_host { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_bcn_send_from_host_cmd_fixed_param */ |
| A_UINT32 vdev_id; |
| A_UINT32 data_len; |
| A_UINT32 frag_ptr; /* Physical address of the frame */ |
| A_UINT32 frame_ctrl; /* farme ctrl to setup PPDU desc */ |
| A_UINT32 dtim_flag; /* to control CABQ traffic */ |
| A_UINT32 bcn_antenna; /* Antenna for beacon transmission */ |
| } wmi_bcn_send_from_host_cmd_fixed_param; |
| |
| /* cmd to support bcn snd for all vaps at once */ |
| typedef struct wmi_pdev_send_bcn { |
| A_UINT32 num_vdevs; |
| wmi_bcn_send_from_host_cmd_fixed_param bcn_cmd[1]; |
| } wmi_pdev_send_bcn_cmd_t; |
| |
| /* |
| * WMI_ROAM_AP_PROFILE: AP profile of connected AP for roaming. |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_ap_profile_fixed_param */ |
| /** id of AP criteria */ |
| A_UINT32 id; |
| |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| |
| /* |
| * Following this structure is the TLV: |
| * wmi_ap_profile ap_profile; //AP profile info |
| */ |
| } wmi_roam_ap_profile_fixed_param; |
| |
| /** |
| * WMI_OFL_SCAN_ADD_AP_PROFILE: add an AP profile. |
| */ |
| typedef struct { |
| /** id of AP criteria */ |
| A_UINT32 id; |
| |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| |
| /** AP profile info */ |
| wmi_ap_profile ap_profile; |
| |
| } wmi_ofl_scan_add_ap_profile; |
| |
| /** |
| * WMI_OFL_SCAN_REMOVE_AP_CRITERIA: remove an ap profile. |
| */ |
| typedef struct { |
| /** id of AP criteria */ |
| A_UINT32 id; |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| } wmi_ofl_scan_remove_ap_profile; |
| |
| /** |
| * WMI_OFL_SCAN_PERIOD: period in msec for offload scan. |
| * 0 will disable ofload scan and a very low value will perform a continous |
| * scan. |
| */ |
| typedef struct { |
| /** offload scan period value, used for scans used when not connected */ |
| A_UINT32 ofl_scan_period; |
| } wmi_ofl_scan_period; |
| |
| /* Do not modify XXX_BYTES or XXX_LEN below as it is fixed by standard */ |
| #define ROAM_OFFLOAD_PMK_BYTES (32) |
| #define ROAM_OFFLOAD_PSK_MSK_BYTES (32) |
| #define ROAM_OFFLOAD_KRK_BYTES (16) |
| #define ROAM_OFFLOAD_BTK_BYTES (32) |
| #define ROAM_OFFLOAD_R0KH_ID_MAX_LEN (48) |
| #define ROAM_OFFLOAD_NUM_MCS_SET (16) |
| |
| /* This TLV will be filled only in case roam offload |
| * for wpa2-psk/okc/ese/11r is enabled */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_offload_fixed_param */ |
| A_UINT32 rssi_cat_gap; /* gap for every category bucket */ |
| A_UINT32 prefer_5g; /* prefer select 5G candidate */ |
| A_UINT32 select_5g_margin; |
| A_UINT32 reassoc_failure_timeout; /* reassoc failure timeout */ |
| A_UINT32 capability; |
| A_UINT32 ht_caps_info; |
| A_UINT32 ampdu_param; |
| A_UINT32 ht_ext_cap; |
| A_UINT32 ht_txbf; |
| A_UINT32 asel_cap; |
| A_UINT32 qos_enabled; |
| A_UINT32 qos_caps; |
| A_UINT32 wmm_caps; |
| A_UINT32 mcsset[ROAM_OFFLOAD_NUM_MCS_SET >> 2]; /* since this 4 byte aligned, |
| * we don't declare it as |
| * tlv array */ |
| } wmi_roam_offload_tlv_param; |
| |
| /* flags for 11i offload */ |
| #define WMI_ROAM_OFFLOAD_FLAG_OKC_ENABLED 0 /* okc is enabled */ |
| /* from bit 1 to bit 31 are reserved */ |
| |
| #define WMI_SET_ROAM_OFFLOAD_OKC_ENABLED(flag) do { \ |
| (flag) |= (1 << WMI_ROAM_OFFLOAD_FLAG_OKC_ENABLED); \ |
| } while (0) |
| |
| #define WMI_SET_ROAM_OFFLOAD_OKC_DISABLED(flag) do { \ |
| (flag) &= ~(1 << WMI_ROAM_OFFLOAD_FLAG_OKC_ENABLED); \ |
| } while (0) |
| |
| #define WMI_GET_ROAM_OFFLOAD_OKC_ENABLED(flag) \ |
| ((flag) & (1 << WMI_ROAM_OFFLOAD_FLAG_OKC_ENABLED)) |
| |
| /* This TLV will be filled only in case of wpa-psk/wpa2-psk */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_11i_offload_fixed_param */ |
| A_UINT32 flags; |
| /** flags. see WMI_ROAM_OFFLOAD_FLAG_ above */ |
| A_UINT32 pmk[ROAM_OFFLOAD_PMK_BYTES >> 2]; /* pmk offload. As this 4 byte aligned, we don't declare it as tlv array */ |
| A_UINT32 pmk_len; |
| /**the length of pmk. in normal case it should be 32, but for LEAP, is should be 16*/ |
| } wmi_roam_11i_offload_tlv_param; |
| |
| /* This TLV will be filled only in case of 11R*/ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_11r_offload_fixed_param */ |
| A_UINT32 mdie_present; |
| A_UINT32 mdid; |
| A_UINT32 r0kh_id[ROAM_OFFLOAD_R0KH_ID_MAX_LEN >> 2]; |
| A_UINT32 r0kh_id_len; |
| A_UINT32 psk_msk[ROAM_OFFLOAD_PSK_MSK_BYTES >> 2]; /* psk/msk offload. As this 4 byte aligned, we don't declare it as tlv array */ |
| A_UINT32 psk_msk_len; |
| /**length of psk_msk*/ |
| } wmi_roam_11r_offload_tlv_param; |
| |
| /* This TLV will be filled only in case of ESE */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_ese_offload_fixed_param */ |
| A_UINT32 krk[ROAM_OFFLOAD_KRK_BYTES >> 2]; /* KRK offload. As this 4 byte aligned, we don't declare it as tlv array */ |
| A_UINT32 btk[ROAM_OFFLOAD_BTK_BYTES >> 2]; /* BTK offload. As this 4 byte aligned, we don't declare it as tlv array */ |
| } wmi_roam_ese_offload_tlv_param; |
| |
| /** WMI_ROAM_EVENT: roam event triggering the host roam logic. |
| * generated when ever a better AP is found in the recent roam scan (or) |
| * when beacon miss is detected (or) when a DEAUTH/DISASSOC is received |
| * from the current AP. |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_event_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** reason for roam event */ |
| A_UINT32 reason; |
| /** associated AP's rssi calculated by FW when reason code is WMI_ROAM_REASON_LOW_RSSI*/ |
| A_UINT32 rssi; |
| |
| } wmi_roam_event_fixed_param; |
| |
| /* roam_reason: bits 0-3 */ |
| #define WMI_ROAM_REASON_BETTER_AP 0x1 /** found a better AP */ |
| #define WMI_ROAM_REASON_BMISS 0x2 /** beacon miss detected */ |
| #define WMI_ROAM_REASON_DEAUTH 0x2 /** deauth/disassoc received */ |
| #define WMI_ROAM_REASON_LOW_RSSI 0x3 /** connected AP's low rssi condition detected */ |
| #define WMI_ROAM_REASON_SUITABLE_AP 0x4 /** found another AP that matches |
| SSID and Security profile in |
| WMI_ROAM_AP_PROFILE, found during scan |
| triggered upon FINAL_BMISS **/ |
| #define WMI_ROAM_REASON_HO_FAILED 0x5 /** LFR3.0 roaming failed, indicate the disconnection to host */ |
| |
| /* |
| * WMI_ROAM_REASON_INVOKE_ROAM_FAIL: |
| * Result code of WMI_ROAM_INVOKE_CMDID. |
| * Any roaming failure before reassociation will be indicated to host |
| * with this reason. |
| * Any roaming failure after reassociation will be indicated to host with |
| * WMI_ROAM_REASON_HO_FAILED no matter WMI_ROAM_INVOKE_CMDID is called or not. |
| */ |
| #define WMI_ROAM_REASON_INVOKE_ROAM_FAIL 0x6 |
| /* reserved up through 0xF */ |
| |
| /* subnet status: bits 4-5 */ |
| typedef enum { |
| WMI_ROAM_SUBNET_CHANGE_STATUS_UNKNOWN = 0, |
| WMI_ROAM_SUBNET_CHANGE_STATUS_UNCHANGED, |
| WMI_ROAM_SUBNET_CHANGE_STATUS_CHANGED, |
| } wmi_roam_subnet_change_status; |
| |
| #define WMI_ROAM_SUBNET_CHANGE_STATUS_MASK 0x30 |
| #define WMI_ROAM_SUBNET_CHANGE_STATUS_SHIFT 4 |
| |
| #define WMI_SET_ROAM_SUBNET_CHANGE_STATUS(roam_reason, status) \ |
| do { \ |
| (roam_reason) |= \ |
| (((status) << WMI_ROAM_SUBNET_CHANGE_STATUS_SHIFT) & \ |
| WMI_ROAM_SUBNET_CHANGE_STATUS_MASK); \ |
| } while (0) |
| |
| #define WMI_GET_ROAM_SUBNET_CHANGE_STATUS(roam_reason) \ |
| (((roam_reason) & WMI_ROAM_SUBNET_CHANGE_STATUS_MASK) >> \ |
| WMI_ROAM_SUBNET_CHANGE_STATUS_SHIFT) |
| |
| /**whenever RIC request information change, host driver should pass all ric related information to firmware (now only support tsepc) |
| * Once, 11r roaming happens, firmware can generate RIC request in reassoc request based on these informations |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ric_request_fixed_param */ |
| A_UINT32 vdev_id; |
| /**unique id identifying the VDEV, generated by the caller*/ |
| A_UINT32 num_ric_request; |
| /**number of ric request ie send to firmware.(max value is 2 now)*/ |
| A_UINT32 is_add_ric; |
| /**support add ric or delete ric*/ |
| } wmi_ric_request_fixed_param; |
| |
| /**tspec element: refer to 8.4.2.32 of 802.11 2012 spec |
| * these elements are used to construct tspec field in RIC request, which allow station to require specific TS when 11r roaming |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 ts_info; /** bits value of TS Info field.*/ |
| A_UINT32 nominal_msdu_size; /**Nominal MSDU Size field*/ |
| A_UINT32 maximum_msdu_size; /**The Maximum MSDU Size field*/ |
| A_UINT32 min_service_interval; /**The Minimum Service Interval field*/ |
| A_UINT32 max_service_interval; /**The Maximum Service Interval field*/ |
| A_UINT32 inactivity_interval; /**The Inactivity Interval field*/ |
| A_UINT32 suspension_interval; /**The Suspension Interval field*/ |
| A_UINT32 svc_start_time; /**The Service Start Time field*/ |
| A_UINT32 min_data_rate; /**The Minimum Data Rate field*/ |
| A_UINT32 mean_data_rate; /**The Mean Data Rate field*/ |
| A_UINT32 peak_data_rate; /**The Peak Data Rate field*/ |
| A_UINT32 max_burst_size; /**The Burst Size field*/ |
| A_UINT32 delay_bound; /**The Delay Bound field*/ |
| A_UINT32 min_phy_rate; /**The Minimum PHY Rate field*/ |
| A_UINT32 surplus_bw_allowance; /**The Surplus Bandwidth Allowance field*/ |
| A_UINT32 medium_time; /**The Medium Time field,in units of 32 us/s.*/ |
| } wmi_ric_tspec; |
| |
| /* flags for roam_invoke_cmd */ |
| /* add this channel into roam cache channel list after this command is finished */ |
| #define WMI_ROAM_INVOKE_FLAG_ADD_CH_TO_CACHE 0 |
| /* indicate to host of failure if WMI_ROAM_INVOKE_CMDID. */ |
| #define WMI_ROAM_INVOKE_FLAG_REPORT_FAILURE 1 |
| /* from bit 2 to bit 31 are reserved */ |
| |
| #define WMI_SET_ROAM_INVOKE_ADD_CH_TO_CACHE(flag) do { \ |
| (flag) |= (1 << WMI_SET_ROAM_INVOKE_ADD_CH_TO_CACHE); \ |
| } while (0) |
| |
| #define WMI_CLEAR_ROAM_INVOKE_ADD_CH_TO_CACHE(flag) do { \ |
| (flag) &= ~(1 << WMI_SET_ROAM_INVOKE_ADD_CH_TO_CACHE); \ |
| } while (0) |
| |
| #define WMI_GET_ROAM_INVOKE_ADD_CH_TO_CACHE(flag) \ |
| ((flag) & (1 << WMI_SET_ROAM_INVOKE_ADD_CH_TO_CACHE)) |
| |
| |
| #define WMI_ROAM_INVOKE_SCAN_MODE_FIXED_CH 0 /* scan given channel only */ |
| #define WMI_ROAM_INVOKE_SCAN_MODE_CACHE_LIST 1 /* scan cached channel list */ |
| #define WMI_ROAM_INVOKE_SCAN_MODE_FULL_CH 2 /* scan full channel */ |
| |
| #define WMI_ROAM_INVOKE_AP_SEL_FIXED_BSSID 0 /* roam to given BSSID only */ |
| #define WMI_ROAM_INVOKE_AP_SEL_ANY_BSSID 1 /* roam to any BSSID */ |
| |
| /** WMI_ROAM_INVOKE_CMD: command to invoke roaming forcefully |
| * |
| * if <roam_scan_ch_mode> is zero and <channel_no> is not given, roaming is not executed. |
| * if <roam_ap_sel_mode> is zero and <BSSID) is not given, roaming is not executed |
| * |
| * This command can be used to add specific channel into roam cached channel list by following |
| * <roam_scan_ch_mode> = 0 |
| * <roam_ap_sel_mode> = 0 |
| * <roam_delay> = 0 |
| * <flag> |= WMI_ROAM_INVOKE_FLAG_ADD_CH_TO_CACHE |
| * <BSSID> = do not fill (there will be no actual roaming because of ap_sel_mode is zero, but no BSSID is given) |
| * <channel_no> = channel list to be added |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_invoke_fixed_param */ |
| A_UINT32 vdev_id; /** Unique id identifying the VDEV on which roaming is invoked */ |
| A_UINT32 flags; /** flags. see WMI_ROAM_INVOKE_FLAG_ above */ |
| A_UINT32 roam_scan_mode; /** see WMI_ROAM_INVOKE_SCAN_ above */ |
| A_UINT32 roam_ap_sel_mode; /** see WMI_ROAM_INVOKE_AP_SEL_ above */ |
| A_UINT32 roam_delay; /** 0 = immediate roam, 1-2^32 = roam after this delay (msec) */ |
| A_UINT32 num_chan; /** # if channels to scan. In the TLV channel_list[] */ |
| A_UINT32 num_bssid; /** number of bssids. In the TLV bssid_list[] */ |
| /** |
| * TLV (tag length value ) parameters follows roam_invoke_req |
| * The TLV's are: |
| * A_UINT32 channel_list[]; |
| * wmi_mac_addr bssid_list[]; |
| */ |
| } wmi_roam_invoke_cmd_fixed_param; |
| |
| /* Definition for op_bitmap */ |
| enum { |
| ROAM_FILTER_OP_BITMAP_BLACK_LIST = 0x1, |
| ROAM_FILTER_OP_BITMAP_WHITE_LIST = 0x2, |
| ROAM_FILTER_OP_BITMAP_PREFER_BSSID = 0x4, |
| }; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_filter_list_fixed_param */ |
| A_UINT32 tlv_header; |
| /** Unique id identifying the VDEV on which roaming filter is adopted */ |
| A_UINT32 vdev_id; |
| A_UINT32 flags; /** flags for filter */ |
| /** 32 bit bitmap to be set on. |
| * bit0 = first param, |
| * bit 1 = second param...etc. Can be or'ed |
| */ |
| A_UINT32 op_bitmap; |
| /* number of blacklist in the TLV variable bssid_black_list */ |
| A_UINT32 num_bssid_black_list; |
| /* number of whitelist in the TLV variable ssid_white_list */ |
| A_UINT32 num_ssid_white_list; |
| /* only for lfr 3.0. number of preferred list & factor in the TLV */ |
| A_UINT32 num_bssid_preferred_list; |
| /** |
| * TLV (tag length value ) parameters follows roam_filter_list_cmd |
| * The TLV's are: |
| * wmi_mac_addr bssid_black_list[]; |
| * wmi_ssid ssid_white_list[]; |
| * wmi_mac_addr bssid_preferred_list[]; |
| * A_UINT32 bssid_preferred_factor[]; |
| */ |
| } wmi_roam_filter_fixed_param; |
| |
| typedef struct { |
| A_UINT8 address[4]; /* IPV4 address in Network Byte Order */ |
| } WMI_IPV4_ADDR; |
| |
| typedef struct _WMI_IPV6_ADDR { |
| A_UINT8 address[16]; /* IPV6 in Network Byte Order */ |
| } WMI_IPV6_ADDR; |
| |
| /* flags for subnet change detection */ |
| #define WMI_ROAM_SUBNET_CHANGE_FLAG_IP4_ENABLED 0 |
| #define WMI_ROAM_SUBNET_CHANGE_FLAG_IP6_ENABLED 1 |
| /* bit 2 to bit 31 are reserved */ |
| |
| /* set IPv4 enabled/disabled flag and get the flag */ |
| #define WMI_SET_ROAM_SUBNET_CHANGE_FLAG_IP4_ENABLED(flag) do { \ |
| (flag) |= (1 << WMI_ROAM_SUBNET_CHANGE_FLAG_IP4_ENABLED); \ |
| } while (0) |
| |
| #define WMI_SET_ROAM_SUBNET_CHANGE_FLAG_IP4_DISABLED(flag) do { \ |
| (flag) &= ~(1 << WMI_ROAM_SUBNET_CHANGE_FLAG_IP4_ENABLED); \ |
| } while (0) |
| |
| #define WMI_GET_ROAM_SUBNET_CHANGE_FLAG_IP4_ENABLED(flag) \ |
| ((flag) & (1 << WMI_ROAM_SUBNET_CHANGE_FLAG_IP4_ENABLED)) |
| |
| /* set IPv6 enabled flag, disabled and get the flag */ |
| #define WMI_SET_ROAM_SUBNET_CHANGE_FLAG_IP6_ENABLED(flag) do { \ |
| (flag) |= (1 << WMI_ROAM_SUBNET_CHANGE_FLAG_IP6_ENABLED); \ |
| } while (0) |
| |
| #define WMI_SET_ROAM_SUBNET_CHANGE_FLAG_IP6_DISABLED(flag) do { \ |
| (flag) &= ~(1 << WMI_ROAM_SUBNET_CHANGE_FLAG_IP6_ENABLED); \ |
| } while (0) |
| |
| #define WMI_GET_ROAM_SUBNET_CHANGE_FLAG_IP6_ENABLED(flag) \ |
| ((flag) & (1 << WMI_ROAM_SUBNET_CHANGE_FLAG_IP6_ENABLED)) |
| |
| /** |
| * WMI_ROAM_SUBNET_CHANGE_CONFIG : Pass the gateway IP and MAC addresses |
| * to FW. FW uses these parameters for subnet change detection. |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_roam_subnet_change_config_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** IPv4/IPv6 enabled/disabled */ |
| /** This flag sets the WMI_SET_ROAM_SUBNET_CHANGE_FLAG_xxx_ENABLED/ |
| DISABLED */ |
| A_UINT32 flag; |
| /** Gateway MAC address */ |
| wmi_mac_addr inet_gw_mac_addr; |
| /** IP addresses */ |
| WMI_IPV4_ADDR inet_gw_ip_v4_addr; |
| WMI_IPV6_ADDR inet_gw_ip_v6_addr; |
| /** Number of software retries for ARP/Neighbor solicitation request */ |
| A_UINT32 max_retries; |
| /** timeout in milliseconds for each ARP request*/ |
| A_UINT32 timeout; |
| /** number of skipped aps **/ |
| A_UINT32 num_skip_subnet_change_detection_bssid_list; |
| /** |
| * TLV (tag length value ) parameters follows roam_subnet_change_config_cmd |
| * structure. The TLV's are: |
| * wmi_mac_addr skip_subnet_change_detection_bssid_list []; |
| **/ |
| } wmi_roam_subnet_change_config_fixed_param; |
| |
| /** WMI_PROFILE_MATCH_EVENT: offload scan |
| * generated when ever atleast one of the matching profiles is found |
| * in recent NLO scan. no data is carried with the event. |
| */ |
| |
| /** P2P specific commands */ |
| |
| /** |
| * WMI_P2P_DEV_SET_DEVICE_INFO : p2p device info, which will be used by |
| * FW to generate P2P IE tobe carried in probe response frames. |
| * FW will respond to probe requests while in listen state. |
| */ |
| typedef struct { |
| /* number of secondary device types,supported */ |
| A_UINT32 num_secondary_dev_types; |
| /** |
| * followed by 8 bytes of primary device id and |
| * num_secondary_dev_types * 8 bytes of secondary device |
| * id. |
| */ |
| } wmi_p2p_dev_set_device_info; |
| |
| /** WMI_P2P_DEV_SET_DISCOVERABILITY: enable/disable discoverability |
| * state. if enabled, an active STA/AP will respond to P2P probe requests on |
| * the operating channel of the VDEV. |
| */ |
| |
| typedef struct { |
| /* 1:enable disoverability, 0:disable discoverability */ |
| A_UINT32 enable_discoverability; |
| } wmi_p2p_set_discoverability; |
| |
| /** WMI_P2P_GO_SET_BEACON_IE: P2P IE to be added to |
| * beacons generated by FW. used in FW beacon mode. |
| * the FW will add this IE to beacon in addition to the beacon |
| * template set by WMI_BCN_TMPL_CMDID command. |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_p2p_go_set_beacon_ie_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /* ie length */ |
| A_UINT32 ie_buf_len; |
| /* Following this structure is the TLV byte stream of ie data of length ie_buf_len: |
| * A_UINT8 ie_data[]; // length in byte given by field num_data. |
| */ |
| |
| } wmi_p2p_go_set_beacon_ie_fixed_param; |
| |
| /** WMI_P2P_GO_PROBE_RESP_IE: P2P IE to be added to |
| * probe response generated by FW. used in FW beacon mode. |
| * the FW will add this IE to probe response in addition to the probe response |
| * template set by WMI_PRB_TMPL_CMDID command. |
| */ |
| typedef struct { |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /* ie length */ |
| A_UINT32 ie_buf_len; |
| /*followed by byte stream of ie data of length ie_buf_len */ |
| } wmi_p2p_go_set_probe_resp_ie; |
| |
| /** WMI_P2P_SET_VENDOR_IE_DATA_CMDID: Vendor specific P2P IE data, which will |
| * be used by the FW to parse the P2P NoA attribute in beacons, probe resposes |
| * and action frames received by the P2P Client. |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_p2p_set_vendor_ie_data_cmd_fixed_param */ |
| /** OS specific P2P IE OUI (3 bytes) + OUI type (1 byte) */ |
| A_UINT32 p2p_ie_oui_type; |
| /** OS specific NoA Attribute ID */ |
| A_UINT32 p2p_noa_attribute; |
| } wmi_p2p_set_vendor_ie_data_cmd_fixed_param; |
| |
| /*----P2P disc offload definition ----*/ |
| |
| typedef struct { |
| A_UINT32 pattern_type; |
| /** |
| * TLV (tag length value ) paramerters follow the pattern structure. |
| * TLV can contain bssid list, ssid list and |
| * ie. the TLV tags are defined above; |
| */ |
| } wmi_p2p_disc_offload_pattern_cmd; |
| |
| typedef struct { |
| /* unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /* mgmt type of the ie */ |
| A_UINT32 mgmt_type; |
| /* ie length */ |
| A_UINT32 ie_buf_len; |
| /*followed by byte stream of ie data of length ie_buf_len */ |
| } wmi_p2p_disc_offload_appie_cmd; |
| |
| typedef struct { |
| /* enable/disable p2p find offload */ |
| A_UINT32 enable; |
| /* unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /* p2p find type */ |
| A_UINT32 disc_type; |
| /* p2p find perodic */ |
| A_UINT32 perodic; |
| /* p2p find listen channel */ |
| A_UINT32 listen_channel; |
| /* p2p find full channel number */ |
| A_UINT32 num_scan_chans; |
| /** |
| * TLV (tag length value ) paramerters follow the pattern structure. |
| * TLV contain channel list |
| */ |
| } wmi_p2p_disc_offload_config_cmd; |
| |
| /*----P2P OppPS definition ----*/ |
| typedef struct { |
| /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_p2p_set_oppps_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /* unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /* OppPS attributes */ |
| /** Bit 0: Indicate enable/disable of OppPS |
| * Bits 7-1: Ctwindow in TUs |
| * Bits 31-8: Reserved |
| */ |
| A_UINT32 oppps_attr; |
| } wmi_p2p_set_oppps_cmd_fixed_param; |
| |
| #define WMI_UNIFIED_OPPPS_ATTR_ENALBED 0x1 |
| #define WMI_UNIFIED_OPPPS_ATTR_ENALBED_S 0 |
| |
| #define WMI_UNIFIED_OPPPS_ATTR_IS_ENABLED(hdr) \ |
| WMI_F_MS((hdr)->oppps_attr, WMI_UNIFIED_OPPPS_ATTR_ENALBED) |
| |
| #define WMI_UNIFIED_OPPPS_ATTR_ENABLED_SET(hdr) \ |
| WMI_F_RMW((hdr)->oppps_attr, 0x1, \ |
| WMI_UNIFIED_OPPPS_ATTR_ENALBED); |
| |
| #define WMI_UNIFIED_OPPPS_ATTR_CTWIN 0xfe |
| #define WMI_UNIFIED_OPPPS_ATTR_CTWIN_S 1 |
| |
| #define WMI_UNIFIED_OPPPS_ATTR_CTWIN_GET(hdr) \ |
| WMI_F_MS((hdr)->oppps_attr, WMI_UNIFIED_OPPPS_ATTR_CTWIN) |
| |
| #define WMI_UNIFIED_OPPPS_ATTR_CTWIN_SET(hdr, v) \ |
| WMI_F_RMW((hdr)->oppps_attr, (v) & 0x7f, \ |
| WMI_UNIFIED_OPPPS_ATTR_CTWIN); |
| |
| typedef struct { |
| A_UINT32 time32; /* upper 32 bits of time stamp */ |
| A_UINT32 time0; /* lower 32 bits of time stamp */ |
| } A_TIME64; |
| |
| typedef enum wmi_peer_sta_kickout_reason { |
| WMI_PEER_STA_KICKOUT_REASON_UNSPECIFIED = 0, /* default value to preserve legacy behavior */ |
| WMI_PEER_STA_KICKOUT_REASON_XRETRY = 1, |
| WMI_PEER_STA_KICKOUT_REASON_INACTIVITY = 2, |
| WMI_PEER_STA_KICKOUT_REASON_IBSS_DISCONNECT = 3, |
| WMI_PEER_STA_KICKOUT_REASON_TDLS_DISCONNECT = 4, /* TDLS peer has disappeared. All tx is failing */ |
| WMI_PEER_STA_KICKOUT_REASON_SA_QUERY_TIMEOUT = 5, |
| } PEER_KICKOUT_REASON; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_sta_kickout_event_fixed_param */ |
| /** peer mac address */ |
| wmi_mac_addr peer_macaddr; |
| /** Reason code, defined as above */ |
| A_UINT32 reason; |
| /** RSSI of the last bcn (averaged) in dB. 0 means Noise Floor value */ |
| A_UINT32 rssi; |
| } wmi_peer_sta_kickout_event_fixed_param; |
| |
| #define WMI_WLAN_PROFILE_MAX_HIST 3 |
| #define WMI_WLAN_PROFILE_MAX_BIN_CNT 32 |
| |
| typedef struct _wmi_wlan_profile_t { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wlan_profile_t */ |
| A_UINT32 id; |
| A_UINT32 cnt; |
| A_UINT32 tot; |
| A_UINT32 min; |
| A_UINT32 max; |
| A_UINT32 hist_intvl; |
| A_UINT32 hist[WMI_WLAN_PROFILE_MAX_HIST]; |
| } wmi_wlan_profile_t; |
| |
| typedef struct _wmi_wlan_profile_ctx_t { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wlan_profile_ctx_t */ |
| A_UINT32 tot; /* time in us */ |
| A_UINT32 tx_msdu_cnt; |
| A_UINT32 tx_mpdu_cnt; |
| A_UINT32 tx_ppdu_cnt; |
| A_UINT32 rx_msdu_cnt; |
| A_UINT32 rx_mpdu_cnt; |
| A_UINT32 bin_count; |
| } wmi_wlan_profile_ctx_t; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wlan_profile_trigger_cmd_fixed_param */ |
| A_UINT32 enable; |
| } wmi_wlan_profile_trigger_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wlan_profile_get_prof_data_cmd_fixed_param */ |
| A_UINT32 value; |
| } wmi_wlan_profile_get_prof_data_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wlan_profile_set_hist_intvl_cmd_fixed_param */ |
| A_UINT32 profile_id; |
| A_UINT32 value; |
| } wmi_wlan_profile_set_hist_intvl_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wlan_profile_enable_profile_id_cmd_fixed_param */ |
| A_UINT32 profile_id; |
| A_UINT32 enable; |
| } wmi_wlan_profile_enable_profile_id_cmd_fixed_param; |
| |
| /*Wifi header is upto 26, LLC is 8, with 14 byte duplicate in 802.3 header, that's 26+8-14=20. |
| 146-128=18. So this means it is converted to non-QoS header. Riva FW take care of the QOS/non-QOS |
| when comparing wifi header.*/ |
| /* NOTE: WOW_DEFAULT_BITMAP_PATTERN_SIZE(_DWORD) and WOW_DEFAULT_BITMASK_SIZE(_DWORD) can't be changed without breaking the compatibility */ |
| #define WOW_DEFAULT_BITMAP_PATTERN_SIZE 146 |
| #define WOW_DEFAULT_BITMAP_PATTERN_SIZE_DWORD 37 /* Convert WOW_DEFAULT_EVT_BUF_SIZE into Int32 size */ |
| #define WOW_DEFAULT_BITMASK_SIZE 146 |
| #define WOW_DEFAULT_BITMASK_SIZE_DWORD 37 |
| #define WOW_MAX_BITMAP_FILTERS 32 |
| #define WOW_DEFAULT_MAGIG_PATTERN_MATCH_CNT 16 |
| #define WOW_EXTEND_PATTERN_MATCH_CNT 16 |
| #define WOW_SHORT_PATTERN_MATCH_CNT 8 |
| #define WOW_DEFAULT_EVT_BUF_SIZE 148 /* Maximum 148 bytes of the data is copied starting from header incase if the match is found. |
| The 148 comes from (128 - 14 ) payload size + 8bytes LLC + 26bytes MAC header */ |
| #define WOW_DEFAULT_IOAC_PATTERN_SIZE 6 |
| #define WOW_DEFAULT_IOAC_PATTERN_SIZE_DWORD 2 |
| #define WOW_DEFAULT_IOAC_RANDOM_SIZE 6 |
| #define WOW_DEFAULT_IOAC_RANDOM_SIZE_DWORD 2 |
| #define WOW_DEFAULT_IOAC_KEEP_ALIVE_PKT_SIZE 120 |
| #define WOW_DEFAULT_IOAC_KEEP_ALIVE_PKT_SIZE_DWORD 30 |
| #define WOW_DEFAULT_IOAC_SOCKET_PATTERN_SIZE 32 |
| #define WOW_DEFAULT_IOAC_SOCKET_PATTERN_SIZE_DWORD 8 |
| #define WOW_DEFAULT_IOAC_KEEP_ALIVE_PKT_REV_SIZE 32 |
| #define WOW_DEFAULT_IOAC_KEEP_ALIVE_PKT_REV_SIZE_DWORD 8 |
| #define WOW_DEFAULT_IOAC_SOCKET_PATTERN_ACKNAK_SIZE 128 |
| #define WOW_DEFAULT_IOAC_SOCKET_PATTERN_ACKNAK_SIZE_DWORD 32 |
| |
| typedef enum pattern_type_e { |
| WOW_PATTERN_MIN = 0, |
| WOW_BITMAP_PATTERN = WOW_PATTERN_MIN, |
| WOW_IPV4_SYNC_PATTERN, |
| WOW_IPV6_SYNC_PATTERN, |
| WOW_WILD_CARD_PATTERN, |
| WOW_TIMER_PATTERN, |
| WOW_MAGIC_PATTERN, |
| WOW_IPV6_RA_PATTERN, |
| WOW_IOAC_PKT_PATTERN, |
| WOW_IOAC_TMR_PATTERN, |
| WOW_IOAC_SOCK_PATTERN, |
| WOW_PATTERN_MAX |
| } WOW_PATTERN_TYPE; |
| |
| typedef enum event_type_e { |
| WOW_BMISS_EVENT = 0, |
| WOW_BETTER_AP_EVENT, |
| WOW_DEAUTH_RECVD_EVENT, |
| WOW_MAGIC_PKT_RECVD_EVENT, |
| WOW_GTK_ERR_EVENT, |
| WOW_FOURWAY_HSHAKE_EVENT, |
| WOW_EAPOL_RECVD_EVENT, |
| WOW_NLO_DETECTED_EVENT, |
| WOW_DISASSOC_RECVD_EVENT, |
| WOW_PATTERN_MATCH_EVENT, |
| WOW_CSA_IE_EVENT, |
| WOW_PROBE_REQ_WPS_IE_EVENT, |
| WOW_AUTH_REQ_EVENT, |
| WOW_ASSOC_REQ_EVENT, |
| WOW_HTT_EVENT, |
| WOW_RA_MATCH_EVENT, |
| WOW_HOST_AUTO_SHUTDOWN_EVENT, |
| WOW_IOAC_MAGIC_EVENT, |
| WOW_IOAC_SHORT_EVENT, |
| WOW_IOAC_EXTEND_EVENT, |
| WOW_IOAC_TIMER_EVENT, |
| WOW_DFS_PHYERR_RADAR_EVENT, |
| WOW_BEACON_EVENT, |
| WOW_CLIENT_KICKOUT_EVENT, |
| WOW_NAN_EVENT, |
| WOW_EXTSCAN_EVENT, |
| WOW_IOAC_REV_KA_FAIL_EVENT, |
| WOW_IOAC_SOCK_EVENT, |
| WOW_NLO_SCAN_COMPLETE_EVENT, |
| WOW_NAN_DATA_EVENT, |
| WOW_NAN_RTT_EVENT, |
| } WOW_WAKE_EVENT_TYPE; |
| |
| typedef enum wake_reason_e { |
| WOW_REASON_UNSPECIFIED = -1, |
| WOW_REASON_NLOD = 0, |
| WOW_REASON_AP_ASSOC_LOST, |
| WOW_REASON_LOW_RSSI, |
| WOW_REASON_DEAUTH_RECVD, |
| WOW_REASON_DISASSOC_RECVD, |
| WOW_REASON_GTK_HS_ERR, |
| WOW_REASON_EAP_REQ, |
| WOW_REASON_FOURWAY_HS_RECV, |
| WOW_REASON_TIMER_INTR_RECV, |
| WOW_REASON_PATTERN_MATCH_FOUND, |
| WOW_REASON_RECV_MAGIC_PATTERN, |
| WOW_REASON_P2P_DISC, |
| WOW_REASON_WLAN_HB, |
| WOW_REASON_CSA_EVENT, |
| WOW_REASON_PROBE_REQ_WPS_IE_RECV, |
| WOW_REASON_AUTH_REQ_RECV, |
| WOW_REASON_ASSOC_REQ_RECV, |
| WOW_REASON_HTT_EVENT, |
| WOW_REASON_RA_MATCH, |
| WOW_REASON_HOST_AUTO_SHUTDOWN, |
| WOW_REASON_IOAC_MAGIC_EVENT, |
| WOW_REASON_IOAC_SHORT_EVENT, |
| WOW_REASON_IOAC_EXTEND_EVENT, |
| WOW_REASON_IOAC_TIMER_EVENT, |
| WOW_REASON_ROAM_HO, |
| WOW_REASON_DFS_PHYERR_RADADR_EVENT, |
| WOW_REASON_BEACON_RECV, |
| WOW_REASON_CLIENT_KICKOUT_EVENT, |
| WOW_REASON_NAN_EVENT, |
| WOW_REASON_EXTSCAN, |
| WOW_REASON_RSSI_BREACH_EVENT, |
| WOW_REASON_IOAC_REV_KA_FAIL_EVENT, |
| WOW_REASON_IOAC_SOCK_EVENT, |
| WOW_REASON_NLO_SCAN_COMPLETE, |
| WOW_REASON_PACKET_FILTER_MATCH, |
| WOW_REASON_ASSOC_RES_RECV, |
| WOW_REASON_REASSOC_REQ_RECV, |
| WOW_REASON_REASSOC_RES_RECV, |
| WOW_REASON_ACTION_FRAME_RECV, |
| WOW_REASON_BPF_ALLOW, |
| WOW_REASON_NAN_DATA, |
| WOW_REASON_NAN_RTT, |
| WOW_REASON_DEBUG_TEST = 0xFF, |
| } WOW_WAKE_REASON_TYPE; |
| |
| typedef enum { |
| WOW_IFACE_PAUSE_ENABLED, |
| WOW_IFACE_PAUSE_DISABLED |
| } WOW_IFACE_STATUS; |
| |
| enum { |
| /* some win10 platfrom will not assert pcie_reset for wow.*/ |
| WMI_WOW_FLAG_IGNORE_PCIE_RESET = 0x00000001, |
| /* |
| * WMI_WOW_FLAG_SEND_PM_PME |
| * Some platforms have issues if the PM_PME message is sent after WoW, |
| * so don't send PM_PME after WoW unless the host uses this flag |
| * to request it. |
| */ |
| WMI_WOW_FLAG_SEND_PM_PME = 0x00000002, |
| }; |
| |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wow_enable_cmd_fixed_param */ |
| A_UINT32 enable; |
| A_UINT32 pause_iface_config; |
| A_UINT32 flags; /* WMI_WOW_FLAG enums */ |
| } wmi_wow_enable_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_wow_hostwakeup_from_sleep_cmd_fixed_param */ |
| /** Reserved for future use */ |
| A_UINT32 reserved0; |
| } wmi_wow_hostwakeup_from_sleep_cmd_fixed_param; |
| |
| #define WOW_ICMPV6_NA_FILTER_DISABLE 0 |
| #define WOW_ICMPV6_NA_FILTER_ENABLE 1 |
| |
| typedef struct { |
| /* TLV tag and len; |
| * tag equals WMITLV_TAG_STRUC_wmi_wow_enable_icmpv6_na_flt_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 enable; /* WOW_ICMPV6_NA_FILTER_ENABLE/DISABLE */ |
| } wmi_wow_enable_icmpv6_na_flt_cmd_fixed_param; |
| |
| typedef struct bitmap_pattern_s { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WOW_BITMAP_PATTERN_T */ |
| A_UINT32 patternbuf[WOW_DEFAULT_BITMAP_PATTERN_SIZE_DWORD]; |
| A_UINT32 bitmaskbuf[WOW_DEFAULT_BITMASK_SIZE_DWORD]; |
| A_UINT32 pattern_offset; |
| A_UINT32 pattern_len; |
| A_UINT32 bitmask_len; |
| A_UINT32 pattern_id; /* must be less than max_bitmap_filters */ |
| } WOW_BITMAP_PATTERN_T; |
| |
| typedef struct ipv4_sync_s { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WOW_IPV4_SYNC_PATTERN_T */ |
| A_UINT32 ipv4_src_addr; |
| A_UINT32 ipv4_dst_addr; |
| A_UINT32 tcp_src_prt; |
| A_UINT32 tcp_dst_prt; |
| } WOW_IPV4_SYNC_PATTERN_T; |
| |
| typedef struct ipv6_sync_s { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WOW_IPV6_SYNC_PATTERN_T */ |
| A_UINT32 ipv6_src_addr[4]; |
| A_UINT32 ipv6_dst_addr[4]; |
| A_UINT32 tcp_src_prt; |
| A_UINT32 tcp_dst_prt; |
| } WOW_IPV6_SYNC_PATTERN_T; |
| |
| typedef struct WOW_MAGIC_PATTERN_CMD { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WOW_MAGIC_PATTERN_CMD */ |
| wmi_mac_addr macaddr; |
| } WOW_MAGIC_PATTERN_CMD; |
| |
| typedef enum wow_ioac_pattern_type { |
| WOW_IOAC_MAGIC_PATTERN = 1, |
| WOW_IOAC_SHORT_PATTERN, |
| WOW_IOAC_EXTEND_PATTERN, |
| } WOW_IOAC_PATTERN_TYPE; |
| |
| typedef struct ioac_sock_pattern_s { |
| /** |
| * TLV tag and len; |
| * tag equals WMITLV_TAG_STRUC_WOW_IOAC_SOCK_PATTERN_T |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 id; |
| A_UINT32 local_ipv4; |
| A_UINT32 remote_ipv4; |
| A_UINT32 local_port; |
| A_UINT32 remote_port; |
| A_UINT32 pattern_len; /* units = bytes */ |
| A_UINT32 pattern[WOW_DEFAULT_IOAC_SOCKET_PATTERN_SIZE_DWORD]; |
| WMI_IPV6_ADDR local_ipv6; |
| WMI_IPV6_ADDR remote_ipv6; |
| A_UINT32 ack_nak_len; |
| A_UINT32 ackpkt[WOW_DEFAULT_IOAC_SOCKET_PATTERN_ACKNAK_SIZE_DWORD]; |
| A_UINT32 nakpkt[WOW_DEFAULT_IOAC_SOCKET_PATTERN_ACKNAK_SIZE_DWORD]; |
| } WOW_IOAC_SOCK_PATTERN_T; |
| |
| typedef struct ioac_pkt_pattern_s { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WOW_IOAC_PKT_PATTERN_T */ |
| A_UINT32 pattern_type; |
| A_UINT32 pattern[WOW_DEFAULT_IOAC_PATTERN_SIZE_DWORD]; |
| A_UINT32 random[WOW_DEFAULT_IOAC_RANDOM_SIZE_DWORD]; |
| A_UINT32 pattern_len; |
| A_UINT32 random_len; |
| } WOW_IOAC_PKT_PATTERN_T; |
| |
| typedef struct ioac_tmr_pattern_s { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WOW_IOAC_TMR_PATTERN_T */ |
| A_UINT32 wake_in_s; |
| A_UINT32 vdev_id; |
| } WOW_IOAC_TMR_PATTERN_T; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_IOAC_ADD_KEEPALIVE_CMD_fixed_param */ |
| A_UINT32 nID; |
| } WMI_WOW_IOAC_ADD_KEEPALIVE_CMD_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_IOAC_DEL_KEEPALIVE_CMD_fixed_param */ |
| A_UINT32 nID; |
| } WMI_WOW_IOAC_DEL_KEEPALIVE_CMD_fixed_param; |
| |
| typedef struct ioac_keepalive_s { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_IOAC_KEEPALIVE_T */ |
| A_UINT32 |
| keepalive_pkt_buf |
| [WOW_DEFAULT_IOAC_KEEP_ALIVE_PKT_SIZE_DWORD]; |
| A_UINT32 keepalive_pkt_len; |
| A_UINT32 period_in_ms; |
| A_UINT32 vdev_id; |
| A_UINT32 max_loss_cnt; |
| A_UINT32 local_ipv4; |
| A_UINT32 remote_ipv4; |
| A_UINT32 local_port; |
| A_UINT32 remote_port; |
| A_UINT32 recv_period_in_ms; |
| A_UINT32 rev_ka_size; |
| A_UINT32 rev_ka_data[WOW_DEFAULT_IOAC_KEEP_ALIVE_PKT_REV_SIZE_DWORD]; |
| WMI_IPV6_ADDR local_ipv6; |
| WMI_IPV6_ADDR remote_ipv6; |
| } WMI_WOW_IOAC_KEEPALIVE_T; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_IOAC_ADD_PATTERN_CMD_fixed_param */ |
| A_UINT32 vdev_id; |
| A_UINT32 pattern_type; |
| /* |
| * Following this struct are these TLVs. Note that they are all array of structures |
| * but can have at most one element. Which TLV is empty or has one element depends |
| * on the field pattern_type. This is to emulate an union. |
| * WOW_IOAC_PKT_PATTERN_T pattern_info_pkt[]; |
| * WOW_IOAC_TMR_PATTERN_T pattern_info_tmr[]; |
| */ |
| } WMI_WOW_IOAC_ADD_PATTERN_CMD_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_IOAC_DEL_PATTERN_CMD_fixed_param */ |
| A_UINT32 vdev_id; |
| A_UINT32 pattern_type; |
| A_UINT32 pattern_id; |
| } WMI_WOW_IOAC_DEL_PATTERN_CMD_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_ADD_PATTERN_CMD_fixed_param */ |
| A_UINT32 vdev_id; |
| A_UINT32 pattern_id; |
| A_UINT32 pattern_type; |
| /* |
| * Following this struct are these TLVs. Note that they are all array of structures |
| * but can have at most one element. Which TLV is empty or has one element depends |
| * on the field pattern_type. This is to emulate an union. |
| * WOW_BITMAP_PATTERN_T pattern_info_bitmap[]; |
| * WOW_IPV4_SYNC_PATTERN_T pattern_info_ipv4[]; |
| * WOW_IPV6_SYNC_PATTERN_T pattern_info_ipv6[]; |
| * WOW_MAGIC_PATTERN_CMD pattern_info_magic_pattern[]; |
| * A_UINT32 pattern_info_timeout[]; |
| * A_UINT32 ra_ratelimit_interval; |
| */ |
| } WMI_WOW_ADD_PATTERN_CMD_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_DEL_PATTERN_CMD_fixed_param */ |
| A_UINT32 vdev_id; |
| A_UINT32 pattern_id; |
| A_UINT32 pattern_type; |
| } WMI_WOW_DEL_PATTERN_CMD_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_WOW_ADD_DEL_EVT_CMD_fixed_param */ |
| A_UINT32 vdev_id; |
| A_UINT32 is_add; |
| A_UINT32 event_bitmap; |
| } WMI_WOW_ADD_DEL_EVT_CMD_fixed_param; |
| |
| /* |
| * This structure is used to set the pattern to check UDP packet in WOW mode. |
| * If match, construct a tx frame in a local buffer to send through the peer |
| * AP to the entity in the IP network that sent the UDP packet to this STA. |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; |
| * tag equals WMITLV_TAG_STRUC_WMI_WOW_UDP_SVC_OFLD_CMD_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 enable; /* 1: enable, 0: disable */ |
| /* |
| * dest_port - |
| * bits 7:0 contain the LSB of the UDP dest port, |
| * bits 15:8 contain the MSB of the UDP dest port |
| */ |
| A_UINT32 dest_port; |
| A_UINT32 pattern_len; /* length in byte of pattern[] */ |
| A_UINT32 response_len; /* length in byte of response[] */ |
| /* |
| * Following this struct are the TLV's: |
| * payload of UDP packet to be checked, network byte order |
| * A_UINT8 pattern[]; |
| * payload of UDP packet to be response, network byte order |
| * A_UINT8 response[]; |
| */ |
| } WMI_WOW_UDP_SVC_OFLD_CMD_fixed_param; |
| |
| /* |
| * This structure is used to set the pattern for WOW host wakeup pin pulse |
| * pattern confirguration. |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_WMI_WOW_HOSTWAKEUP_PIN_PATTERN_CONFIG_CMD_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| |
| /* 1: enable, 0: disable */ |
| A_UINT32 enable; |
| |
| /* pin for host wakeup */ |
| A_UINT32 pin; |
| |
| /* interval for keeping low voltage, unit: ms */ |
| A_UINT32 interval_low; |
| |
| /* interval for keeping high voltage, unit: ms */ |
| A_UINT32 interval_high; |
| |
| /* repeat times for pulse (0xffffffff means forever) */ |
| A_UINT32 repeat_cnt; |
| } WMI_WOW_HOSTWAKEUP_GPIO_PIN_PATTERN_CONFIG_CMD_fixed_param; |
| |
| typedef struct wow_event_info_s { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WOW_EVENT_INFO_fixed_param */ |
| A_UINT32 vdev_id; |
| A_UINT32 flag; /*This is current reserved. */ |
| A_INT32 wake_reason; |
| A_UINT32 data_len; |
| } WOW_EVENT_INFO_fixed_param; |
| |
| typedef struct wow_initial_wakeup_event_s { |
| /* |
| * TLV tag and len; tag equals |
| * WOW_INITIAL_WAKEUP_EVENT_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| } WOW_INITIAL_WAKEUP_EVENT_fixed_param; |
| |
| typedef enum { |
| WOW_EVENT_INFO_TYPE_PACKET = 0x0001, |
| WOW_EVENT_INFO_TYPE_BITMAP, |
| WOW_EVENT_INFO_TYPE_GTKIGTK, |
| } WOW_EVENT_INFO_TYPE; |
| |
| typedef struct wow_event_info_section_s { |
| A_UINT32 data_type; |
| A_UINT32 data_len; |
| } WOW_EVENT_INFO_SECTION; |
| |
| typedef struct wow_event_info_section_packet_s { |
| A_UINT8 packet[WOW_DEFAULT_EVT_BUF_SIZE]; |
| } WOW_EVENT_INFO_SECTION_PACKET; |
| |
| typedef struct wow_event_info_section_bitmap_s { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WOW_EVENT_INFO_SECTION_BITMAP */ |
| A_UINT32 flag; /*This is current reserved. */ |
| A_UINT32 value; /*This could be the pattern id for bitmap pattern. */ |
| A_UINT32 org_len; /*The length of the orginal packet. */ |
| } WOW_EVENT_INFO_SECTION_BITMAP; |
| |
| /** |
| * This command is sent from WLAN host driver to firmware to |
| * enable or disable D0-WOW. D0-WOW means APSS suspend with |
| * PCIe link and DDR being active. |
| * |
| * |
| * Entering D0-WOW Mode (based on kernel suspend request): |
| * host->target: WMI_DO_WOW_ENABLE_DISABLE_CMDID (enable = 1) |
| * target: Take action (e.g. dbglog suspend) |
| * target->host: HTC_ACK (HTC_MSG_SEND_SUSPEND_COMPLETE message) |
| * |
| * Exiting D0-WOW mode (based on kernel resume OR target->host message received) |
| * host->target: WMI_DO_WOW_ENABLE_DISABLE_CMDID (enable = 0) |
| * target: Take action (e.g. dbglog resume) |
| * target->host: WMI_D0_WOW_DISABLE_ACK_EVENTID |
| * |
| * This command is applicable only on the PCIE LL systems |
| * Host can enter either D0-WOW or WOW mode, but NOT both at same time |
| * Decision to enter D0-WOW or WOW is based on active interfaces |
| * |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_d0_wow_enable_disable_cmd_fixed_param */ |
| A_UINT32 enable; /* 1 = enable, 0 = disable */ |
| } wmi_d0_wow_enable_disable_cmd_fixed_param; |
| |
| typedef enum extend_wow_type_e { |
| EXTWOW_TYPE_APP_TYPE1, /* extend wow type: only enable wakeup for app type1 */ |
| EXTWOW_TYPE_APP_TYPE2, /* extend wow type: only enable wakeup for app type2 */ |
| EXTWOW_TYPE_APP_TYPE1_2, /* extend wow type: enable wakeup for app type1&2 */ |
| EXTWOW_TYPE_APP_PULSETEST, |
| EXTWOW_DISABLED = 255, |
| } EXTWOW_TYPE; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals wmi_extwow_enable_cmd_fixed_param */ |
| A_UINT32 vdev_id; |
| A_UINT32 type; |
| A_UINT32 wakeup_pin_num; |
| A_UINT32 swol_pulsetest_type; |
| A_UINT32 swol_pulsetest_application; |
| } wmi_extwow_enable_cmd_fixed_param; |
| |
| #define SWOL_INDOOR_MAC_ADDRESS_INDEX_MAX 8 |
| #define SWOL_INDOOR_KEY_LEN 16 |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals wmi_extwow_set_app_type1_params_cmd_fixed_param */ |
| A_UINT32 vdev_id; |
| wmi_mac_addr wakee_mac; |
| A_UINT8 ident[8]; |
| A_UINT8 passwd[16]; |
| A_UINT32 ident_len; |
| A_UINT32 passwd_len; |
| |
| /* indoor check parameters */ |
| /* key for mac addresses specified in swol_indoor_key_mac |
| * Big-endian hosts need to byte-swap the bytes within each 4-byte |
| * segment of this array, so the bytes will return to their original |
| * order when the entire WMI message contents are byte-swapped to |
| * convert from big-endian to little-endian format. |
| */ |
| A_UINT8 swol_indoor_key[SWOL_INDOOR_MAC_ADDRESS_INDEX_MAX][SWOL_INDOOR_KEY_LEN]; |
| /* key length for specified mac address index |
| * Big-endian hosts need to byte-swap the bytes within each 4-byte |
| * segment of this array, so the bytes will return to their original |
| * order when the entire WMI message contents are byte-swapped to |
| * convert from big-endian to little-endian format. |
| */ |
| A_UINT8 swol_indoor_key_len[SWOL_INDOOR_MAC_ADDRESS_INDEX_MAX]; |
| /* mac address array allowed to wakeup host*/ |
| wmi_mac_addr swol_indoor_key_mac[SWOL_INDOOR_MAC_ADDRESS_INDEX_MAX]; |
| /* app mask for the mac addresses specified in swol_indoor_key_mac */ |
| A_UINT32 swol_indoor_app_mask[SWOL_INDOOR_MAC_ADDRESS_INDEX_MAX]; |
| A_UINT32 swol_indoor_waker_check; /* whether to do indoor waker check */ |
| A_UINT32 swol_indoor_pw_check; /* whether to check password */ |
| A_UINT32 swol_indoor_pattern; /* wakeup pattern */ |
| A_UINT32 swol_indoor_exception; /* wakeup when exception happens */ |
| A_UINT32 swol_indoor_exception_app; |
| } wmi_extwow_set_app_type1_params_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals wmi_extwow_set_app_type2_params_cmd_fixed_param */ |
| A_UINT32 vdev_id; |
| |
| A_UINT8 rc4_key[16]; |
| A_UINT32 rc4_key_len; |
| |
| /** ip header parameter */ |
| A_UINT32 ip_id; /* NC id */ |
| A_UINT32 ip_device_ip; /* NC IP address */ |
| A_UINT32 ip_server_ip; /* Push server IP address */ |
| |
| /** tcp header parameter */ |
| A_UINT16 tcp_src_port; /* NC TCP port */ |
| A_UINT16 tcp_dst_port; /* Push server TCP port */ |
| A_UINT32 tcp_seq; |
| A_UINT32 tcp_ack_seq; |
| |
| A_UINT32 keepalive_init; /* Initial ping interval */ |
| A_UINT32 keepalive_min; /* Minimum ping interval */ |
| A_UINT32 keepalive_max; /* Maximum ping interval */ |
| A_UINT32 keepalive_inc; /* Increment of ping interval */ |
| |
| wmi_mac_addr gateway_mac; |
| A_UINT32 tcp_tx_timeout_val; |
| A_UINT32 tcp_rx_timeout_val; |
| |
| /** add extra parameter for backward-compatible */ |
| /* |
| * For all byte arrays, natural order is used. E.g. |
| * rc4_write_sandbox[0] holds the 1st RC4 S-box byte, |
| * rc4_write_sandbox[1] holds the 2nd RC4 S-box byte, etc. |
| */ |
| |
| /* used to encrypt transmit packet such as keep-alive */ |
| A_UINT8 rc4_write_sandbox[256]; |
| A_UINT32 rc4_write_x; |
| A_UINT32 rc4_write_y; |
| |
| /* used to decrypt received packet such as wow data */ |
| A_UINT8 rc4_read_sandbox[256]; |
| A_UINT32 rc4_read_x; |
| A_UINT32 rc4_read_y; |
| |
| /* used to caculate HMAC hash for transmit packet such as keep-alive */ |
| A_UINT8 ssl_write_seq[8]; |
| A_UINT8 ssl_sha1_write_key[64]; |
| A_UINT32 ssl_sha1_write_key_len; |
| |
| /* used to calculate HAMC hash for receive packet such as wow data */ |
| A_UINT8 ssl_read_seq[8]; |
| A_UINT8 ssl_sha1_read_key[64]; |
| A_UINT32 ssl_sha1_read_key_len; |
| |
| /* optional element for specifying TCP options data to include in |
| * transmit packets such as keep-alive |
| */ |
| A_UINT32 tcp_options_len; |
| A_UINT8 tcp_options[40]; |
| |
| A_UINT32 async_id; /* keep-alive request id */ |
| } wmi_extwow_set_app_type2_params_cmd_fixed_param; |
| |
| #define WMI_RXERR_CRC 0x01 /* CRC error on frame */ |
| #define WMI_RXERR_DECRYPT 0x08 /* non-Michael decrypt error */ |
| #define WMI_RXERR_MIC 0x10 /* Michael MIC decrypt error */ |
| #define WMI_RXERR_KEY_CACHE_MISS 0x20 /* No/incorrect key matter in h/w */ |
| |
| typedef enum { |
| PKT_PWR_SAVE_PAID_MATCH = 0x0001, |
| PKT_PWR_SAVE_GID_MATCH = 0x0002, |
| PKT_PWR_SAVE_EARLY_TIM_CLEAR = 0x0004, |
| PKT_PWR_SAVE_EARLY_DTIM_CLEAR = 0x0008, |
| PKT_PWR_SAVE_EOF_PAD_DELIM = 0x0010, |
| PKT_PWR_SAVE_MACADDR_MISMATCH = 0x0020, |
| PKT_PWR_SAVE_DELIM_CRC_FAIL = 0x0040, |
| PKT_PWR_SAVE_GID_NSTS_ZERO = 0x0080, |
| PKT_PWR_SAVE_RSSI_CHECK = 0x0100, |
| PKT_PWR_SAVE_5G_EBT = 0x0200, |
| PKT_PWR_SAVE_2G_EBT = 0x0400, |
| WMI_PKT_PWR_SAVE_MAX = 0x0800, |
| } WMI_PKT_PWR_SAVE_TYPE; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ftm_intg_cmd_fixed_param */ |
| A_UINT32 num_data; |
| /** length in byte of data[]. */ |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| /* This structure is used to send Factory Test Mode [FTM] command |
| * from host to firmware for integrated chips which are binary blobs. |
| * Following this structure is the TLV: |
| * A_UINT8 data[]; // length in byte given by field num_data. |
| */ |
| } wmi_ftm_intg_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ftm_intg_event_fixed_param */ |
| A_UINT32 num_data; |
| /** length in byte of data[]. */ |
| /* This structure is used to receive Factory Test Mode [FTM] event |
| * from firmware to host for integrated chips which are binary blobs. |
| * Following this structure is the TLV: |
| * A_UINT8 data[]; // length in byte given by field num_data. |
| */ |
| } wmi_ftm_intg_event_fixed_param; |
| |
| #define WMI_MAX_NS_OFFLOADS 2 |
| #define WMI_MAX_ARP_OFFLOADS 2 |
| |
| #define WMI_ARPOFF_FLAGS_VALID (1 << 0) /* the tuple entry is valid */ |
| #define WMI_ARPOFF_FLAGS_MAC_VALID (1 << 1) /* the target mac address is valid */ |
| #define WMI_ARPOFF_FLAGS_REMOTE_IP_VALID (1 << 2) /* remote IP field is valid */ |
| |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_ARP_OFFLOAD_TUPLE */ |
| A_UINT32 flags; /* flags */ |
| A_UINT8 target_ipaddr[4]; /* IPV4 addresses of the local node */ |
| A_UINT8 remote_ipaddr[4]; /* source address of the remote node requesting the ARP (qualifier) */ |
| wmi_mac_addr target_mac; /* mac address for this tuple, if not valid, the local MAC is used */ |
| } WMI_ARP_OFFLOAD_TUPLE; |
| |
| #define WMI_NSOFF_FLAGS_VALID (1 << 0) /* the tuple entry is valid */ |
| #define WMI_NSOFF_FLAGS_MAC_VALID (1 << 1) /* the target mac address is valid */ |
| #define WMI_NSOFF_FLAGS_REMOTE_IP_VALID (1 << 2) /* remote IP field is valid */ |
| /* whether the configured IPv6 address is anycast */ |
| #define WMI_NSOFF_FLAGS_IS_IPV6_ANYCAST (1 << 3) |
| |
| #define WMI_NSOFF_MAX_TARGET_IPS 2 |
| |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_NS_OFFLOAD_TUPLE */ |
| A_UINT32 flags; /* flags */ |
| /* NOTE: This size of array target_ipaddr[] cannot be changed without breaking WMI compatibility. */ |
| WMI_IPV6_ADDR target_ipaddr[WMI_NSOFF_MAX_TARGET_IPS]; /* IPV6 target addresses of the local node */ |
| WMI_IPV6_ADDR solicitation_ipaddr; /* multi-cast source IP addresses for receiving solicitations */ |
| WMI_IPV6_ADDR remote_ipaddr; /* address of remote node requesting the solicitation (qualifier) */ |
| wmi_mac_addr target_mac; /* mac address for this tuple, if not valid, the local MAC is used */ |
| } WMI_NS_OFFLOAD_TUPLE; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_SET_ARP_NS_OFFLOAD_CMD_fixed_param */ |
| A_UINT32 flags; |
| A_UINT32 vdev_id; |
| A_UINT32 num_ns_ext_tuples; |
| /* Following this structure are the TLVs: |
| * WMI_NS_OFFLOAD_TUPLE ns_tuples[WMI_MAX_NS_OFFLOADS]; |
| * WMI_ARP_OFFLOAD_TUPLE arp_tuples[WMI_MAX_ARP_OFFLOADS]; |
| * size of ns_ext_tuples is based on num_ns_ext_tuples |
| * WMI_NS_OFFLOAD_TUPLE ns_ext_tuples[]; |
| */ |
| } WMI_SET_ARP_NS_OFFLOAD_CMD_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 pattern_id; |
| A_UINT32 timeout; |
| A_UINT32 length; |
| /* Following this would be the pattern |
| A_UINT8 pattern[] of length specifed by length |
| field in the structure. */ |
| } WMI_ADD_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 pattern_id; |
| } WMI_DEL_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_tid_addba_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** Tid number */ |
| A_UINT32 tid; |
| /** Initiator (1) or Responder (0) for this aggregation */ |
| A_UINT32 initiator; |
| /** size of the negotiated window */ |
| A_UINT32 window_size; |
| /** starting sequence number (only valid for initiator) */ |
| A_UINT32 ssn; |
| /** timeout field represents the time to wait for Block Ack in |
| * initiator case and the time to wait for BAR in responder |
| * case. 0 represents no timeout. */ |
| A_UINT32 timeout; |
| /* BA policy: immediate ACK (0) or delayed ACK (1) */ |
| A_UINT32 policy; |
| } wmi_peer_tid_addba_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_tid_delba_cmd */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** Tid number */ |
| A_UINT32 tid; |
| /** Initiator (1) or Responder (0) for this aggregation */ |
| A_UINT32 initiator; |
| } wmi_peer_tid_delba_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tx_addba_complete_event_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** Tid number */ |
| A_UINT32 tid; |
| /** Event status */ |
| A_UINT32 status; |
| } wmi_tx_addba_complete_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tx_delba_complete_event_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** Tid number */ |
| A_UINT32 tid; |
| /** Event status */ |
| A_UINT32 status; |
| } wmi_tx_delba_complete_event_fixed_param; |
| /* |
| * Structure to request sequence numbers for a given |
| * peer station on different TIDs. The TIDs are |
| * indicated in the tidBitMap, tid 0 would |
| * be represented by LSB bit 0. tid 1 would be |
| * represented by LSB bit 1 etc. |
| * The target will retrieve the current sequence |
| * numbers for the peer on all the TIDs requested |
| * and send back a response in a WMI event. |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals |
| WMITLV_TAG_STRUC_wmi_ba_req_ssn_cmd_sub_struct_param */ |
| wmi_mac_addr peer_macaddr; |
| A_UINT32 tidBitmap; |
| } wmi_ba_req_ssn; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals |
| WMITLV_TAG_STRUC_wmi_ba_req_ssn_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** Number of requested SSN In the TLV wmi_ba_req_ssn[] */ |
| A_UINT32 num_ba_req_ssn; |
| /* Following this struc are the TLV's: |
| * wmi_ba_req_ssn ba_req_ssn_list; All peer and tidBitMap for which the ssn is requested |
| */ |
| } wmi_ba_req_ssn_cmd_fixed_param; |
| |
| /* |
| * Max transmit categories |
| * |
| * Note: In future if we need to increase WMI_MAX_TC definition |
| * It would break the compatibility for WMI_BA_RSP_SSN_EVENTID. |
| */ |
| #define WMI_MAX_TC 8 |
| |
| /* |
| * Structure to send response sequence numbers |
| * for a give peer and tidmap. |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals |
| WMITLV_TAG_STRUC_wmi_ba_req_ssn_event_sub_struct_param */ |
| wmi_mac_addr peer_macaddr; |
| /* A bool to indicate if ssn is present */ |
| A_UINT32 ssn_present_for_tid[WMI_MAX_TC]; |
| /* The ssn from target, valid only if |
| * ssn_present_for_tid[tidn] equals 1 |
| */ |
| A_UINT32 ssn_for_tid[WMI_MAX_TC]; |
| } wmi_ba_event_ssn; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals |
| WMITLV_TAG_STRUC_wmi_ba_rsp_ssn_event_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** Event status, success or failure of the overall operation */ |
| A_UINT32 status; |
| /** Number of requested SSN In the TLV wmi_ba_req_ssn[] */ |
| A_UINT32 num_ba_event_ssn; |
| /* Following this struc are the TLV's: |
| * wmi_ba_event_ssn ba_event_ssn_list; All peer and tidBitMap for which the ssn is requested |
| */ |
| } wmi_ba_rsp_ssn_event_fixed_param; |
| |
| enum wmi_aggr_state_req_type { |
| WMI_DISABLE_AGGREGATION, |
| WMI_ENABLE_AGGREGATION |
| }; |
| |
| /* |
| * This event is generated by the COEX module |
| * when esco call is begins the coex module in fw genrated this event to host to |
| * disable the RX aggregation and after completion of the esco call fw will indicate to |
| * enable back the Rx aggregation . |
| */ |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_aggr_state_trig_event_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** req_type contains values from enum |
| * wmi_aggr_state_req_type; 0 (disable) 1(enable) */ |
| A_UINT32 req_type; |
| } wmi_aggr_state_trig_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_install_key_complete_event_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** MAC address used for installing */ |
| wmi_mac_addr peer_macaddr; |
| /** key index */ |
| A_UINT32 key_ix; |
| /** key flags */ |
| A_UINT32 key_flags; |
| /** Event status */ |
| A_UINT32 status; |
| } wmi_vdev_install_key_complete_event_fixed_param; |
| |
| typedef enum _WMI_NLO_AUTH_ALGORITHM { |
| WMI_NLO_AUTH_ALGO_80211_OPEN = 1, |
| WMI_NLO_AUTH_ALGO_80211_SHARED_KEY = 2, |
| WMI_NLO_AUTH_ALGO_WPA = 3, |
| WMI_NLO_AUTH_ALGO_WPA_PSK = 4, |
| WMI_NLO_AUTH_ALGO_WPA_NONE = 5, |
| WMI_NLO_AUTH_ALGO_RSNA = 6, |
| WMI_NLO_AUTH_ALGO_RSNA_PSK = 7, |
| } WMI_NLO_AUTH_ALGORITHM; |
| |
| typedef enum _WMI_NLO_CIPHER_ALGORITHM { |
| WMI_NLO_CIPHER_ALGO_NONE = 0x00, |
| WMI_NLO_CIPHER_ALGO_WEP40 = 0x01, |
| WMI_NLO_CIPHER_ALGO_TKIP = 0x02, |
| WMI_NLO_CIPHER_ALGO_CCMP = 0x04, |
| WMI_NLO_CIPHER_ALGO_WEP104 = 0x05, |
| WMI_NLO_CIPHER_ALGO_BIP = 0x06, |
| WMI_NLO_CIPHER_ALGO_WPA_USE_GROUP = 0x100, |
| WMI_NLO_CIPHER_ALGO_RSN_USE_GROUP = 0x100, |
| WMI_NLO_CIPHER_ALGO_WEP = 0x101, |
| } WMI_NLO_CIPHER_ALGORITHM; |
| |
| /* SSID broadcast type passed in NLO params */ |
| typedef enum _WMI_NLO_SSID_BcastNwType { |
| WMI_NLO_BCAST_UNKNOWN = 0, |
| WMI_NLO_BCAST_NORMAL = 1, |
| WMI_NLO_BCAST_HIDDEN = 2, |
| } WMI_NLO_SSID_BcastNwType; |
| |
| #define WMI_NLO_MAX_SSIDS 16 |
| #define WMI_NLO_MAX_CHAN 48 |
| |
| #define WMI_NLO_CONFIG_STOP (0x1 << 0) |
| #define WMI_NLO_CONFIG_START (0x1 << 1) |
| #define WMI_NLO_CONFIG_RESET (0x1 << 2) |
| #define WMI_NLO_CONFIG_SLOW_SCAN (0x1 << 4) |
| #define WMI_NLO_CONFIG_FAST_SCAN (0x1 << 5) |
| #define WMI_NLO_CONFIG_SSID_HIDE_EN (0x1 << 6) |
| /* This bit is used to indicate if EPNO or supplicant PNO is enabled. Only |
| * one of them can be enabled at a given time */ |
| #define WMI_NLO_CONFIG_ENLO (0x1 << 7) |
| #define WMI_NLO_CONFIG_SCAN_PASSIVE (0x1 << 8) |
| #define WMI_NLO_CONFIG_ENLO_RESET (0x1 << 9) |
| |
| /* Whether directed scan needs to be performed (for hidden SSIDs) */ |
| #define WMI_ENLO_FLAG_DIRECTED_SCAN 1 |
| /* Whether PNO event shall be triggered if the network is found on A band */ |
| #define WMI_ENLO_FLAG_A_BAND 2 |
| /* Whether PNO event shall be triggered if the network is found on G band */ |
| #define WMI_ENLO_FLAG_G_BAND 4 |
| /* Whether strict matching is required (i.e. firmware shall not match on the entire SSID) */ |
| #define WMI_ENLO_FLAG_STRICT_MATCH 8 |
| /* Code for matching the beacon AUTH IE - additional codes TBD open */ |
| #define WMI_ENLO_AUTH_CODE_OPEN 1 |
| /* WPA_PSK or WPA2PSK */ |
| #define WMI_ENLO_AUTH_CODE_PSK 2 |
| /* any EAPOL */ |
| #define WMI_ENLO_AUTH_CODE_EAPOL 4 |
| |
| /* NOTE: wmi_nlo_ssid_param structure can't be changed without breaking the compatibility */ |
| typedef struct wmi_nlo_ssid_param { |
| A_UINT32 valid; |
| wmi_ssid ssid; |
| } wmi_nlo_ssid_param; |
| |
| /* NOTE: wmi_nlo_enc_param structure can't be changed without breaking the compatibility */ |
| typedef struct wmi_nlo_enc_param { |
| A_UINT32 valid; |
| A_UINT32 enc_type; |
| } wmi_nlo_enc_param; |
| |
| /* NOTE: wmi_nlo_auth_param structure can't be changed without breaking the compatibility */ |
| typedef struct wmi_nlo_auth_param { |
| A_UINT32 valid; |
| A_UINT32 auth_type; |
| } wmi_nlo_auth_param; |
| |
| /* NOTE: wmi_nlo_bcast_nw_param structure can't be changed without breaking the compatibility */ |
| typedef struct wmi_nlo_bcast_nw_param { |
| A_UINT32 valid; |
| /** |
| * If WMI_NLO_CONFIG_EPNO is not set. Supplicant PNO is enabled. The value |
| * should be true/false.Otherwise EPNO is enabled. bcast_nw_type would be used |
| * as a bit flag contains WMI_ENLO_FLAG_XXX |
| */ |
| A_UINT32 bcast_nw_type; |
| } wmi_nlo_bcast_nw_param; |
| |
| /* NOTE: wmi_nlo_rssi_param structure can't be changed without breaking the compatibility */ |
| typedef struct wmi_nlo_rssi_param { |
| A_UINT32 valid; |
| A_INT32 rssi; |
| } wmi_nlo_rssi_param; |
| |
| typedef struct nlo_configured_parameters { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_nlo_configured_parameters */ |
| wmi_nlo_ssid_param ssid; |
| wmi_nlo_enc_param enc_type; |
| wmi_nlo_auth_param auth_type; |
| wmi_nlo_rssi_param rssi_cond; |
| wmi_nlo_bcast_nw_param bcast_nw_type; /* indicates if the SSID is hidden or not */ |
| } nlo_configured_parameters; |
| |
| /* Support channel prediction for PNO scan after scanning top_k_num channels |
| * if stationary_threshold is met. |
| */ |
| typedef struct nlo_channel_prediction_cfg { |
| A_UINT32 tlv_header; |
| /* Enable or disable this feature. */ |
| A_UINT32 enable; |
| /* Top K channels will be scanned before deciding whether to further |
| * scan or stop. Minimum value is 3 and maximum is 5. */ |
| A_UINT32 top_k_num; |
| /* Preconfigured stationary threshold. Lesser value means more |
| * conservative. Bigger value means more aggressive. |
| * Maximum is 100 and mininum is 0. */ |
| A_UINT32 stationary_threshold; |
| /* Periodic full channel scan in milliseconds unit. |
| * After full_scan_period_ms since last full scan, channel prediction |
| * scan is suppressed and will do full scan. |
| * This is to help detecting sudden AP power-on or -off. |
| * Value 0 means no full scan at all (not recommended). |
| */ |
| A_UINT32 full_scan_period_ms; |
| } nlo_channel_prediction_cfg; |
| |
| typedef struct enlo_candidate_score_params_t { |
| /* |
| * TLV tag and len; |
| * tag equals WMITLV_TAG_STRUC_wmi_enlo_candidate_score_param |
| */ |
| A_UINT32 tlv_header; |
| /* minimum 5GHz RSSI for a BSSID to be considered (units = dBm) */ |
| A_INT32 min5GHz_rssi; |
| /* minimum 2.4GHz RSSI for a BSSID to be considered (units = dBm) */ |
| A_INT32 min24GHz_rssi; |
| /* the maximum score that a network can have before bonuses */ |
| A_UINT32 initial_score_max; |
| /* current_connection_bonus: |
| * only report when there is a network's score this much higher |
| * than the current connection |
| */ |
| A_UINT32 current_connection_bonus; |
| /* score bonus for all networks with the same network flag */ |
| A_UINT32 same_network_bonus; |
| /* score bonus for networks that are not open */ |
| A_UINT32 secure_bonus; |
| /* 5GHz RSSI score bonus (applied to all 5GHz networks) */ |
| A_UINT32 band5GHz_bonus; |
| } enlo_candidate_score_params; |
| |
| typedef struct wmi_nlo_config { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_nlo_config_cmd_fixed_param */ |
| A_UINT32 flags; |
| A_UINT32 vdev_id; |
| A_UINT32 fast_scan_max_cycles; |
| A_UINT32 active_dwell_time; |
| A_UINT32 passive_dwell_time; /* PDT in msecs */ |
| A_UINT32 probe_bundle_size; |
| A_UINT32 rest_time; /* ART = IRT */ |
| A_UINT32 max_rest_time; /* Max value that can be reached after SBM */ |
| A_UINT32 scan_backoff_multiplier; /* SBM */ |
| A_UINT32 fast_scan_period; /* SCBM */ |
| A_UINT32 slow_scan_period; /* specific to windows */ |
| A_UINT32 no_of_ssids; |
| A_UINT32 num_of_channels; |
| A_UINT32 delay_start_time; /* NLO scan start delay time in milliseconds */ |
| /* The TLVs will follow. |
| * nlo_configured_parameters nlo_list[]; |
| * A_UINT32 channel_list[]; |
| * nlo_channel_prediction_cfg ch_prediction_cfg; |
| * enlo_candidate_score_params candidate_score_params; |
| */ |
| |
| } wmi_nlo_config_cmd_fixed_param; |
| |
| typedef struct wmi_nlo_event { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_nlo_event */ |
| A_UINT32 vdev_id; |
| } wmi_nlo_event; |
| |
| /* WMI_PASSPOINT_CONFIG_SET |
| * Sets a list for passpoint networks for PNO purposes; |
| * it should be matched against any passpoint networks found |
| * during regular PNO scan. |
| */ |
| #define WMI_PASSPOINT_CONFIG_SET (0x1 << 0) |
| /* WMI_PASSPOINT_CONFIG_RESET |
| * Reset passpoint network list - |
| * no Passpoint networks should be matched after this. |
| */ |
| #define WMI_PASSPOINT_CONFIG_RESET (0x1 << 1) |
| #define PASSPOINT_REALM_LEN 256 |
| #define PASSPOINT_ROAMING_CONSORTIUM_ID_LEN 5 |
| #define PASSPOINT_ROAMING_CONSORTIUM_ID_NUM 16 |
| #define PASSPOINT_PLMN_ID_LEN 3 |
| #define PASSPOINT_PLMN_ID_ALLOC_LEN /* round up to A_UINT32 boundary */ \ |
| (((PASSPOINT_PLMN_ID_LEN + 3) >> 2) << 2) |
| |
| /* |
| * Confirm PASSPOINT_REALM_LEN is a multiple of 4, so the |
| * A_UINT8 realm[PASSPOINT_REALM_LEN] |
| * array will end on a 4-byte boundary. |
| * (This 4-byte alignment simplifies endianness-correction byte swapping.) |
| */ |
| A_COMPILE_TIME_ASSERT(check_passpoint_realm_size, (PASSPOINT_REALM_LEN % sizeof(A_UINT32)) == 0); |
| |
| /* |
| * Confirm the product of PASSPOINT_ROAMING_CONSORTIUM_ID_NUM and |
| * PASSPOINT_ROAMING_CONSORTIUM_ID_LEN is a multiple of 4, so the |
| * roaming_consortium_ids array below will end on a 4-byte boundary. |
| * (This 4-byte alignment simplifies endianness-correction byte swapping.) |
| */ |
| A_COMPILE_TIME_ASSERT(check_passpoint_roaming_consortium_ids_size, |
| ((PASSPOINT_ROAMING_CONSORTIUM_ID_NUM*PASSPOINT_ROAMING_CONSORTIUM_ID_LEN) % sizeof(A_UINT32)) == 0); |
| |
| /* wildcard ID to allow an action (reset) to apply to all networks */ |
| #define WMI_PASSPOINT_NETWORK_ID_WILDCARD 0xFFFFFFFF |
| typedef struct wmi_passpoint_config { |
| /* TLV tag and len; tag equals wmi_passpoint_config_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /* (network) id |
| * identifier of the matched network, report this in event |
| * This id can be a wildcard (WMI_PASSPOINT_NETWORK_ID_WILDCARD) |
| * that indicates the action should be applied to all networks. |
| * Currently, the only action that is applied to all networks is "reset". |
| * If a non-wildcard ID is specified, that particular network is configured. |
| * If a wildcard ID is specified, all networks are reset. |
| */ |
| A_UINT32 id; |
| A_UINT32 req_id; |
| /*null terminated UTF8 encoded realm, 0 if unspecified*/ |
| A_UINT8 realm[PASSPOINT_REALM_LEN]; |
| /*roaming consortium ids to match, 0s if unspecified*/ |
| A_UINT8 roaming_consortium_ids[PASSPOINT_ROAMING_CONSORTIUM_ID_NUM][PASSPOINT_ROAMING_CONSORTIUM_ID_LEN]; |
| /*This would be bytes-stream as same as defition of realm id in 802.11 standard*/ |
| /*PLMN id mcc/mnc combination as per rules, 0s if unspecified */ |
| A_UINT8 plmn[PASSPOINT_PLMN_ID_ALLOC_LEN]; |
| } wmi_passpoint_config_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals |
| wmi_passpoint_event_hdr */ |
| A_UINT32 id; /* identifier of the matched network */ |
| A_UINT32 vdev_id; |
| A_UINT32 timestamp; /* time since boot (in microsecond) when the |
| result was retrieved*/ |
| wmi_ssid ssid; |
| wmi_mac_addr bssid; /* bssid of the network */ |
| A_UINT32 channel_mhz; /* channel frequency in MHz */ |
| A_UINT32 rssi; /* rssi value */ |
| A_UINT32 rtt; /* timestamp in nanoseconds*/ |
| A_UINT32 rtt_sd; /* standard deviation in rtt */ |
| A_UINT32 beacon_period; /* beacon advertised in the beacon */ |
| A_UINT32 capability; /* capabilities advertised in the beacon */ |
| A_UINT32 ie_length; /* size of the ie_data blob */ |
| A_UINT32 anqp_length; /* length of ANQP blob */ |
| /** |
| * Following this structure is the byte stream of ie data of length ie_buf_len: |
| * A_UINT8 ie_data[]; // length in byte given by field ie_length, blob of ie data in beacon |
| * A_UINT8 anqp_ie[]; // length in byte given by field anqp_len, blob of anqp data of IE |
| * Implicitly, combing ie_data and anqp_ie into a single bufp, and the bytes |
| * stream of each ie should be same as BEACON/Action-frm by 802.11 spec |
| */ |
| } wmi_passpoint_event_hdr; |
| |
| #define GTK_OFFLOAD_OPCODE_MASK 0xFF000000 |
| /** Enable GTK offload, and provided parameters KEK,KCK and replay counter values */ |
| #define GTK_OFFLOAD_ENABLE_OPCODE 0x01000000 |
| /** Disable GTK offload */ |
| #define GTK_OFFLOAD_DISABLE_OPCODE 0x02000000 |
| /** Read GTK offload parameters, generates WMI_GTK_OFFLOAD_STATUS_EVENT */ |
| #define GTK_OFFLOAD_REQUEST_STATUS_OPCODE 0x04000000 |
| enum wmi_chatter_mode { |
| /* Chatter enter/exit happens |
| * automatically based on preset |
| * params |
| */ |
| WMI_CHATTER_MODE_AUTO, |
| /* Chatter enter is triggered |
| * manually by the user |
| */ |
| WMI_CHATTER_MODE_MANUAL_ENTER, |
| /* Chatter exit is triggered |
| * manually by the user |
| */ |
| WMI_CHATTER_MODE_MANUAL_EXIT, |
| /* Placeholder max value, always last */ |
| WMI_CHATTER_MODE_MAX |
| }; |
| |
| enum wmi_chatter_query_type { |
| /*query coalescing filter match counter */ |
| WMI_CHATTER_QUERY_FILTER_MATCH_CNT, |
| WMI_CHATTER_QUERY_MAX |
| }; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_chatter_set_mode_cmd_fixed_param */ |
| A_UINT32 chatter_mode; |
| } wmi_chatter_set_mode_cmd_fixed_param; |
| |
| /** maximum number of filter supported*/ |
| #define CHATTER_MAX_COALESCING_RULES 11 |
| /** maximum number of field tests per filter*/ |
| #define CHATTER_MAX_FIELD_TEST 5 |
| /** maximum field length in number of DWORDS*/ |
| #define CHATTER_MAX_TEST_FIELD_LEN32 2 |
| |
| /** field test kinds*/ |
| #define CHATTER_COALESCING_TEST_EQUAL 1 |
| #define CHATTER_COALESCING_TEST_MASKED_EQUAL 2 |
| #define CHATTER_COALESCING_TEST_NOT_EQUAL 3 |
| |
| /** packet type*/ |
| #define CHATTER_COALESCING_PKT_TYPE_UNICAST (1 << 0) |
| #define CHATTER_COALESCING_PKT_TYPE_MULTICAST (1 << 1) |
| #define CHATTER_COALESCING_PKT_TYPE_BROADCAST (1 << 2) |
| |
| /** coalescing field test*/ |
| typedef struct _chatter_pkt_coalescing_hdr_test { |
| /** offset from start of mac header, for windows native wifi host driver |
| * should assume standard 802.11 frame format without QoS info and address4 |
| * FW would account for any non-stand fields for final offset value. |
| */ |
| A_UINT32 offset; |
| A_UINT32 length; /* length of test field */ |
| A_UINT32 test; /*equal, not equal or masked equal */ |
| A_UINT32 mask[CHATTER_MAX_TEST_FIELD_LEN32]; /*mask byte stream */ |
| A_UINT32 value[CHATTER_MAX_TEST_FIELD_LEN32]; /*value byte stream */ |
| } chatter_pkt_coalescing_hdr_test; |
| |
| /** packet coalescing filter*/ |
| typedef struct _chatter_pkt_coalescing_filter { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_chatter_pkt_coalescing_filter */ |
| A_UINT32 filter_id; /*unique id assigned by OS */ |
| A_UINT32 max_coalescing_delay; /*max miliseconds 1st pkt can be hold */ |
| A_UINT32 pkt_type; /*unicast/multicast/broadcast */ |
| A_UINT32 num_of_test_field; /*number of field test in table */ |
| chatter_pkt_coalescing_hdr_test test_fields[CHATTER_MAX_FIELD_TEST]; /*field test tbl */ |
| } chatter_pkt_coalescing_filter; |
| |
| /** packet coalescing filter add command*/ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_chatter_coalescing_add_filter_cmd_fixed_param */ |
| A_UINT32 num_of_filters; |
| /* Following this tlv, there comes an array of structure of type chatter_pkt_coalescing_filter |
| chatter_pkt_coalescing_filter rx_filter[1]; */ |
| } wmi_chatter_coalescing_add_filter_cmd_fixed_param; |
| /** packet coalescing filter delete command*/ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_chatter_coalescing_delete_filter_cmd_fixed_param */ |
| A_UINT32 filter_id; /*filter id which will be deleted */ |
| } wmi_chatter_coalescing_delete_filter_cmd_fixed_param; |
| /** packet coalescing query command*/ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_chatter_coalescing_query_cmd_fixed_param */ |
| A_UINT32 type; /*type of query */ |
| } wmi_chatter_coalescing_query_cmd_fixed_param; |
| /** chatter query reply event*/ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_chatter_query_reply_event_fixed_param */ |
| A_UINT32 type; /*query type */ |
| A_UINT32 filter_match_cnt; /*coalescing filter match counter */ |
| } wmi_chatter_query_reply_event_fixed_param; |
| |
| /* NOTE: This constants GTK_OFFLOAD_KEK_BYTES, GTK_OFFLOAD_KCK_BYTES, and GTK_REPLAY_COUNTER_BYTES |
| * cannot be changed without breaking WMI compatibility. */ |
| #define GTK_OFFLOAD_KEK_BYTES 16 |
| #define GTK_OFFLOAD_KCK_BYTES 16 |
| /* NOTE: GTK_REPLAY_COUNTER_BYTES, WMI_MAX_KEY_LEN, IGTK_PN_SIZE cannot be changed in the future without breaking WMI compatibility */ |
| #define GTK_REPLAY_COUNTER_BYTES 8 |
| #define WMI_MAX_KEY_LEN 32 |
| #define IGTK_PN_SIZE 6 |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_GTK_OFFLOAD_STATUS_EVENT_fixed_param */ |
| A_UINT32 vdev_id; |
| /** unique id identifying the VDEV */ |
| A_UINT32 flags; /* status flags */ |
| A_UINT32 refresh_cnt; /* number of successful GTK refresh exchanges since last SET operation */ |
| A_UINT8 replay_counter[GTK_REPLAY_COUNTER_BYTES]; /* current replay counter */ |
| A_UINT8 igtk_keyIndex; /* Use if IGTK_OFFLOAD is defined */ |
| A_UINT8 igtk_keyLength; /* Use if IGTK_OFFLOAD is defined */ |
| A_UINT8 igtk_keyRSC[IGTK_PN_SIZE]; /* key replay sequence counter *//* Use if IGTK_OFFLOAD is defined */ |
| A_UINT8 igtk_key[WMI_MAX_KEY_LEN]; /* Use if IGTK_OFFLOAD is defined */ |
| } WMI_GTK_OFFLOAD_STATUS_EVENT_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_GTK_OFFLOAD_CMD_fixed_param */ |
| A_UINT32 vdev_id; /** unique id identifying the VDEV */ |
| A_UINT32 flags; /* control flags, GTK offload command use high byte */ |
| /* The size of following 3 arrays cannot be changed without breaking WMI compatibility. */ |
| A_UINT8 KEK[GTK_OFFLOAD_KEK_BYTES]; /* key encryption key */ |
| A_UINT8 KCK[GTK_OFFLOAD_KCK_BYTES]; /* key confirmation key */ |
| A_UINT8 replay_counter[GTK_REPLAY_COUNTER_BYTES]; /* replay counter for re-key */ |
| } WMI_GTK_OFFLOAD_CMD_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_WMI_PMF_OFFLOAD_SET_SA_QUERY_CMD_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 sa_query_retry_interval; /* in msec */ |
| A_UINT32 sa_query_max_retry_count; |
| } WMI_PMF_OFFLOAD_SET_SA_QUERY_CMD_fixed_param; |
| |
| typedef enum { |
| WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, /* 802.11 NULL frame */ |
| WMI_STA_KEEPALIVE_METHOD_UNSOLICITED_ARP_RESPONSE = 2, /* ARP response */ |
| WMI_STA_KEEPALIVE_METHOD_ETHERNET_LOOPBACK = 3, /*ETHERNET LOOPBACK */ |
| /* gratuitous ARP req*/ |
| WMI_STA_KEEPALIVE_METHOD_GRATUITOUS_ARP_REQUEST = 4, |
| } WMI_STA_KEEPALIVE_METHOD; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_STA_KEEPALVE_ARP_RESPONSE */ |
| WMI_IPV4_ADDR sender_prot_addr; /* Sender protocol address */ |
| WMI_IPV4_ADDR target_prot_addr; /* Target protocol address */ |
| wmi_mac_addr dest_mac_addr; /* destination MAC address */ |
| } WMI_STA_KEEPALVE_ARP_RESPONSE; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_STA_KEEPALIVE_CMD_fixed_param */ |
| A_UINT32 vdev_id; |
| A_UINT32 enable; /* 1 - Enable, 0 - disable */ |
| A_UINT32 method; /* keep alive method */ |
| A_UINT32 interval; /* time interval in seconds */ |
| /* |
| * NOTE: following this structure is the TLV for ARP Resonse: |
| * WMI_STA_KEEPALVE_ARP_RESPONSE arp_resp; // ARP response |
| */ |
| } WMI_STA_KEEPALIVE_CMD_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 action; |
| } WMI_VDEV_WNM_SLEEPMODE_CMD_fixed_param; |
| typedef WMI_VDEV_WNM_SLEEPMODE_CMD_fixed_param WMI_STA_WNMSLEEP_CMD; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_set_keepalive_cmd_fixed_param */ |
| A_UINT32 vdev_id; |
| A_UINT32 keepaliveInterval; /* seconds */ |
| A_UINT32 keepaliveMethod; |
| } wmi_vdev_set_keepalive_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_get_keepalive_cmd_fixed_param */ |
| A_UINT32 vdev_id; |
| } wmi_vdev_get_keepalive_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_get_keepalive_event_fixed_param */ |
| A_UINT32 vdev_id; |
| A_UINT32 keepaliveInterval; /* seconds */ |
| A_UINT32 keepaliveMethod; /* seconds */ |
| } wmi_vdev_get_keepalive_event_fixed_param; |
| |
| #define IPSEC_NATKEEPALIVE_FILTER_DISABLE 0 |
| #define IPSEC_NATKEEPALIVE_FILTER_ENABLE 1 |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 action; |
| } WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMD_fixed_param; |
| |
| typedef WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMD_fixed_param |
| WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMD; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 mcc_tbttmode; |
| wmi_mac_addr mcc_bssid; |
| } wmi_vdev_mcc_set_tbtt_mode_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; /* home vdev id */ |
| A_UINT32 meas_token; /* from measure request frame */ |
| A_UINT32 dialog_token; |
| A_UINT32 number_bursts; /* zero keep sending until cancel, bigger than 0 means times e.g. 1,2 */ |
| A_UINT32 burst_interval; /* unit in mill seconds, interval between consecutive burst */ |
| A_UINT32 burst_cycle; /* times cycle through within one burst */ |
| A_UINT32 tx_power; /* for path frame */ |
| A_UINT32 off_duration; /* uint in mill seconds, channel off duraiton for path loss frame sending */ |
| wmi_mac_addr dest_mac; /* multicast DA, for path loss frame */ |
| A_UINT32 num_chans; |
| } wmi_vdev_plmreq_start_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 meas_token; /* same value from req */ |
| } wmi_vdev_plmreq_stop_cmd_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_p2p_set_noa_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /* unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /* enable/disable NoA */ |
| A_UINT32 enable; |
| /** number of NoA desc. In the TLV noa_descriptor[] */ |
| A_UINT32 num_noa; |
| /** |
| * TLV (tag length value ) paramerters follow the pattern structure. |
| * TLV contain NoA desc with num of num_noa |
| */ |
| } wmi_p2p_set_noa_cmd_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_unit_test_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /* unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /* Identify the wlan module */ |
| A_UINT32 module_id; |
| /* Num of test arguments passed */ |
| A_UINT32 num_args; |
| /** |
| * TLV (tag length value ) parameters follow the wmi_roam_chan_list |
| * structure. The TLV's are: |
| * A_UINT32 args[]; |
| **/ |
| } wmi_unit_test_cmd_fixed_param; |
| |
| /** Roaming offload SYNCH_COMPLETE from host when host finished sync logic |
| * after it received WMI_ROAM_SYNCH_EVENTID. |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_synch_complete_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| } wmi_roam_synch_complete_fixed_param; |
| |
| typedef enum { |
| RECOVERY_SIM_ASSERT = 0x01, |
| RECOVERY_SIM_NO_DETECT = 0x02, |
| RECOVERY_SIM_CTR_EP_FULL = 0x03, |
| RECOVERY_SIM_EMPTY_POINT = 0x04, |
| RECOVERY_SIM_STACK_OV = 0x05, |
| RECOVERY_SIM_INFINITE_LOOP = 0x06, |
| RECOVERY_SIM_PCIE_LINKDOWN = 0x07, |
| RECOVERY_SIM_SELF_RECOVERY = 0x08, |
| } RECOVERY_SIM_TYPE; |
| |
| /* WMI_FORCE_FW_HANG_CMDID */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_FORCE_FW_HANG_CMD_fixed_param */ |
| A_UINT32 type; /*0:unused 1: ASSERT, 2: not respond detect command,3: simulate ep-full(),4:... */ |
| A_UINT32 delay_time_ms; /*0xffffffff means the simulate will delay for random time (0 ~0xffffffff ms) */ |
| } WMI_FORCE_FW_HANG_CMD_fixed_param; |
| #define WMI_MCAST_FILTER_SET 1 |
| #define WMI_MCAST_FILTER_DELETE 2 |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 index; |
| A_UINT32 action; |
| wmi_mac_addr mcastbdcastaddr; |
| } WMI_SET_MCASTBCAST_FILTER_CMD_fixed_param; |
| |
| /* GPIO Command and Event data structures */ |
| |
| /* WMI_GPIO_CONFIG_CMDID */ |
| enum { |
| WMI_GPIO_PULL_NONE, |
| WMI_GPIO_PULL_UP, |
| WMI_GPIO_PULL_DOWN, |
| }; |
| |
| enum { |
| WMI_GPIO_INTTYPE_DISABLE, |
| WMI_GPIO_INTTYPE_RISING_EDGE, |
| WMI_GPIO_INTTYPE_FALLING_EDGE, |
| WMI_GPIO_INTTYPE_BOTH_EDGE, |
| WMI_GPIO_INTTYPE_LEVEL_LOW, |
| WMI_GPIO_INTTYPE_LEVEL_HIGH |
| }; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_gpio_config_cmd_fixed_param */ |
| A_UINT32 gpio_num; /* GPIO number to be setup */ |
| A_UINT32 input; /* 0 - Output/ 1 - Input */ |
| A_UINT32 pull_type; /* Pull type defined above */ |
| A_UINT32 intr_mode; /* Interrupt mode defined above (Input) */ |
| } wmi_gpio_config_cmd_fixed_param; |
| |
| /* WMI_GPIO_OUTPUT_CMDID */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_gpio_output_cmd_fixed_param */ |
| A_UINT32 gpio_num; /* GPIO number to be setup */ |
| A_UINT32 set; /* Set the GPIO pin */ |
| } wmi_gpio_output_cmd_fixed_param; |
| |
| /* WMI_GPIO_INPUT_EVENTID */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_gpio_input_event_fixed_param */ |
| A_UINT32 gpio_num; /* GPIO number which changed state */ |
| } wmi_gpio_input_event_fixed_param; |
| |
| /* WMI_P2P_DISC_EVENTID */ |
| enum { |
| P2P_DISC_SEARCH_PROB_REQ_HIT = 0, /* prob req hit the p2p find pattern */ |
| P2P_DISC_SEARCH_PROB_RESP_HIT, /* prob resp hit the p2p find pattern */ |
| }; |
| |
| enum { |
| P2P_DISC_MODE_SEARCH = 0, /* do search when p2p find offload */ |
| P2P_DISC_MODE_LISTEN, /* do listen when p2p find offload */ |
| P2P_DISC_MODE_AUTO, /* do listen and search when p2p find offload */ |
| }; |
| |
| enum { |
| P2P_DISC_PATTERN_TYPE_BSSID = 0, /* BSSID pattern */ |
| P2P_DISC_PATTERN_TYPE_DEV_NAME, /* device name pattern */ |
| }; |
| |
| typedef struct { |
| A_UINT32 vdev_id; |
| A_UINT32 reason; /* P2P DISC wake up reason */ |
| } wmi_p2p_disc_event; |
| |
| typedef WMI_GTK_OFFLOAD_STATUS_EVENT_fixed_param |
| WOW_EVENT_INFO_SECTION_GTKIGTK; |
| |
| typedef enum { |
| WMI_FAKE_TXBFER_SEND_NDPA, |
| WMI_FAKE_TXBFER_SEND_MU, |
| WMI_FAKE_TXBFER_NDPA_FBTYPE, |
| WMI_FAKE_TXBFER_NDPA_NCIDX, |
| WMI_FAKE_TXBFER_NDPA_POLL, |
| WMI_FAKE_TXBFER_NDPA_BW, |
| WMI_FAKE_TXBFER_NDPA_PREAMBLE, |
| WMI_FAKE_TXBFER_NDPA_RATE, |
| WMI_FAKE_TXBFER_NDP_BW, |
| WMI_FAKE_TXBFER_NDP_NSS, |
| WMI_TXBFEE_ENABLE_UPLOAD_H, |
| WMI_TXBFEE_ENABLE_CAPTURE_H, |
| WMI_TXBFEE_SET_CBF_TBL, |
| WMI_TXBFEE_CBF_TBL_LSIG, |
| WMI_TXBFEE_CBF_TBL_SIGA1, |
| WMI_TXBFEE_CBF_TBL_SIGA2, |
| WMI_TXBFEE_CBF_TBL_SIGB, |
| WMI_TXBFEE_CBF_TBL_PAD, |
| WMI_TXBFEE_CBF_TBL_DUR, |
| WMI_TXBFEE_SU_NCIDX, |
| WMI_TXBFEE_CBIDX, |
| WMI_TXBFEE_NGIDX, |
| } WMI_TXBF_PARAM_ID; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_txbf_cmd_fixed_param */ |
| /** parameter id */ |
| A_UINT32 param_id; |
| /** parameter value */ |
| A_UINT32 param_value; |
| } wmi_txbf_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_upload_h_hdr */ |
| A_UINT32 h_length; |
| A_UINT32 cv_length; |
| /* This TLV is followed by array of bytes: |
| * // h_cv info buffer |
| * A_UINT8 bufp[]; |
| */ |
| } wmi_upload_h_hdr; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_capture_h_event_hdr */ |
| A_UINT32 svd_num; |
| A_UINT32 tone_num; |
| A_UINT32 reserved; |
| } wmi_capture_h_event_hdr; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_avoid_freq_range_desc */ |
| A_UINT32 start_freq; /* start frequency, not channel center freq */ |
| A_UINT32 end_freq; /* end frequency */ |
| } wmi_avoid_freq_range_desc; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_avoid_freq_ranges_event_fixed_param */ |
| /* bad channel range count, multi range is allowed, 0 means all channel clear */ |
| A_UINT32 num_freq_ranges; |
| |
| /* The TLVs will follow. |
| * multi range with num_freq_ranges, LTE advance multi carrier, CDMA,etc |
| * wmi_avoid_freq_range_desc avd_freq_range[]; // message buffer, NULL terminated |
| */ |
| } wmi_avoid_freq_ranges_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_gtk_rekey_fail_event_fixed_param */ |
| /** Reserved for future use */ |
| A_UINT32 reserved0; |
| A_UINT32 vdev_id; |
| } wmi_gtk_rekey_fail_event_fixed_param; |
| |
| enum wmm_ac_downgrade_policy { |
| WMM_AC_DOWNGRADE_DEPRIO, |
| WMM_AC_DOWNGRADE_DROP, |
| WMM_AC_DOWNGRADE_INVALID, |
| }; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 cwmin; |
| A_UINT32 cwmax; |
| A_UINT32 aifs; |
| A_UINT32 txoplimit; |
| A_UINT32 acm; |
| A_UINT32 no_ack; |
| } wmi_wmm_vparams; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| wmi_wmm_vparams wmm_params[4]; /* 0 be, 1 bk, 2 vi, 3 vo */ |
| } wmi_vdev_set_wmm_params_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 gtxRTMask[2]; /* for HT and VHT rate masks */ |
| A_UINT32 userGtxMask; /* host request for GTX mask */ |
| A_UINT32 gtxPERThreshold; /* default: 10% */ |
| A_UINT32 gtxPERMargin; /* default: 2% */ |
| A_UINT32 gtxTPCstep; /* default: 1 */ |
| A_UINT32 gtxTPCMin; /* default: 5 */ |
| A_UINT32 gtxBWMask; /* 20/40/80/160 Mhz */ |
| } wmi_vdev_set_gtx_params_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 ac; |
| A_UINT32 medium_time_us; /* per second unit, the Admitted time granted, unit in micro seconds */ |
| A_UINT32 downgrade_type; |
| } wmi_vdev_wmm_addts_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 ac; |
| } wmi_vdev_wmm_delts_cmd_fixed_param; |
| |
| /* DEPRECATED */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_dfs_enable_cmd_fixed_param */ |
| /** Reserved for future use */ |
| A_UINT32 reserved0; |
| } wmi_pdev_dfs_enable_cmd_fixed_param; |
| |
| /* DEPRECATED */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_dfs_disable_cmd_fixed_param */ |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| } wmi_pdev_dfs_disable_cmd_fixed_param; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_dfs_phyerr_filter_ena_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| } wmi_dfs_phyerr_filter_ena_cmd_fixed_param; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_dfs_phyerr_filter_dis_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Reserved for future use */ |
| A_UINT32 reserved0; |
| } wmi_dfs_phyerr_filter_dis_cmd_fixed_param; |
| |
| /** TDLS COMMANDS */ |
| |
| /* WMI_TDLS_SET_STATE_CMDID */ |
| /* TDLS State */ |
| enum wmi_tdls_state { |
| /** TDLS disable */ |
| WMI_TDLS_DISABLE, |
| /** TDLS enabled - no firmware connection tracking/notifications */ |
| WMI_TDLS_ENABLE_PASSIVE, |
| /** TDLS enabled - with firmware connection tracking/notifications */ |
| WMI_TDLS_ENABLE_ACTIVE, |
| /* TDLS enabled - firmware waits for peer mac for connection tracking */ |
| WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL, |
| /** TDLS enabled - TDLS connection tracking is done in host */ |
| WMI_TDLS_ENABLE_CONNECTION_TRACKER_IN_HOST, |
| }; |
| |
| /* TDLS Options */ |
| #define WMI_TDLS_OFFCHAN_EN (1 << 0) /** TDLS Off Channel support */ |
| #define WMI_TDLS_BUFFER_STA_EN (1 << 1) /** TDLS Buffer STA support */ |
| #define WMI_TDLS_SLEEP_STA_EN (1 << 2) /** TDLS Sleep STA support (not currently supported) */ |
| |
| typedef struct { |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tdls_set_state_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /** Enable/Disable TDLS (wmi_tdls_state) */ |
| A_UINT32 state; |
| /* Duration (in ms) over which to calculate tx/rx threshold |
| * to trigger TDLS Discovery |
| */ |
| A_UINT32 notification_interval_ms; |
| /** number of packets OVER which notify/suggest TDLS Discovery: |
| * if current tx pps counter / notification interval >= threshold |
| * then a notification will be sent to host to advise TDLS Discovery */ |
| A_UINT32 tx_discovery_threshold; |
| /** number of packets UNDER which notify/suggest TDLS Teardown: |
| * if current tx pps counter / notification interval < threshold |
| * then a notification will be sent to host to advise TDLS Tear down */ |
| A_UINT32 tx_teardown_threshold; |
| /** Absolute RSSI value under which notify/suggest TDLS Teardown */ |
| A_INT32 rssi_teardown_threshold; |
| /** Peer RSSI < (AP RSSI + delta) will trigger a teardown */ |
| A_INT32 rssi_delta; |
| /** TDLS Option Control |
| * Off-Channel, Buffer STA, (later)Sleep STA support */ |
| A_UINT32 tdls_options; |
| /* Buffering time in number of beacon intervals */ |
| A_UINT32 tdls_peer_traffic_ind_window; |
| /* Wait time for PTR frame */ |
| A_UINT32 tdls_peer_traffic_response_timeout_ms; |
| /* Self PUAPSD mask */ |
| A_UINT32 tdls_puapsd_mask; |
| /* Inactivity timeout */ |
| A_UINT32 tdls_puapsd_inactivity_time_ms; |
| /* Max of rx frame during SP */ |
| A_UINT32 tdls_puapsd_rx_frame_threshold; |
| /* Duration (in ms) over which to check whether TDLS link |
| * needs to be torn down |
| */ |
| A_UINT32 teardown_notification_ms; |
| /* STA kickout threshold for TDLS peer */ |
| A_UINT32 tdls_peer_kickout_threshold; |
| } wmi_tdls_set_state_cmd_fixed_param; |
| |
| /* WMI_TDLS_PEER_UPDATE_CMDID */ |
| |
| enum wmi_tdls_peer_state { |
| /** tx peer TDLS link setup now starting, traffic to DA should be |
| * paused (except TDLS frames) until state is moved to CONNECTED (or |
| * TEARDOWN on setup failure) */ |
| WMI_TDLS_PEER_STATE_PEERING, |
| /** tx peer TDLS link established, running (all traffic to DA unpaused) */ |
| WMI_TDLS_PEER_STATE_CONNECTED, |
| /** tx peer TDLS link tear down started (link paused, any frames |
| * queued for DA will be requeued back through the AP)*/ |
| WMI_TDLS_PEER_STATE_TEARDOWN, |
| /* Add peer mac into connection table */ |
| WMI_TDLS_PEER_ADD_MAC_ADDR, |
| /* Remove peer mac from connection table */ |
| WMI_TDLS_PEER_REMOVE_MAC_ADDR, |
| }; |
| |
| /* NB: These defines are fixed, and cannot be changed without breaking WMI compatibility */ |
| #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 |
| typedef struct { |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tdls_peer_capabilities */ |
| A_UINT32 tlv_header; |
| /* Peer's QoS Info - for U-APSD */ |
| /* AC FLAGS - accessed through macros below */ |
| /* Ack, SP, More Data Ack - accessed through macros below */ |
| A_UINT32 peer_qos; |
| /*TDLS Peer's U-APSD Buffer STA Support */ |
| A_UINT32 buff_sta_support; |
| /*TDLS off channel related params */ |
| A_UINT32 off_chan_support; |
| A_UINT32 peer_curr_operclass; |
| A_UINT32 self_curr_operclass; |
| /* Number of channels available for off channel operation */ |
| A_UINT32 peer_chan_len; |
| A_UINT32 peer_operclass_len; |
| A_UINT8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; |
| /* Is peer initiator or responder of TDLS setup request */ |
| A_UINT32 is_peer_responder; |
| /* Preferred off channel number as configured by user */ |
| A_UINT32 pref_offchan_num; |
| /* Preferred off channel bandwidth as configured by user */ |
| A_UINT32 pref_offchan_bw; |
| |
| /** Followed by the variable length TLV peer_chan_list: |
| * wmi_channel peer_chan_list[]. |
| * Array size would be peer_chan_len. |
| * This array is intersected channels which is supported by both peer |
| * and DUT. freq1 in chan_info shall be same as mhz, freq2 shall be 0. |
| * FW shall compute BW for an offchan based on peer's ht/vht cap |
| * received in peer_assoc cmd during change STA operation |
| */ |
| } wmi_tdls_peer_capabilities; |
| |
| #define WMI_TDLS_QOS_VO_FLAG 0 |
| #define WMI_TDLS_QOS_VI_FLAG 1 |
| #define WMI_TDLS_QOS_BK_FLAG 2 |
| #define WMI_TDLS_QOS_BE_FLAG 3 |
| #define WMI_TDLS_QOS_ACK_FLAG 4 |
| #define WMI_TDLS_QOS_SP_FLAG 5 |
| #define WMI_TDLS_QOS_MOREDATA_FLAG 7 |
| |
| #define WMI_TDLS_PEER_SET_QOS_FLAG(ppeer_caps, flag) do { \ |
| (ppeer_caps)->peer_qos |= (1 << flag); \ |
| } while (0) |
| #define WMI_TDLS_PEER_GET_QOS_FLAG(ppeer_caps, flag) \ |
| (((ppeer_caps)->peer_qos & (1 << flag)) >> flag) |
| |
| #define WMI_SET_TDLS_PEER_VO_UAPSD(ppeer_caps) \ |
| WMI_TDLS_PEER_SET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_VO_FLAG) |
| #define WMI_GET_TDLS_PEER_VO_UAPSD(ppeer_caps) \ |
| WMI_TDLS_PEER_GET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_VO_FLAG) |
| #define WMI_SET_TDLS_PEER_VI_UAPSD(ppeer_caps) \ |
| WMI_TDLS_PEER_SET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_VI_FLAG) |
| #define WMI_GET_TDLS_PEER_VI_UAPSD(ppeer_caps) \ |
| WMI_TDLS_PEER_GET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_VI_FLAG) |
| #define WMI_SET_TDLS_PEER_BK_UAPSD(ppeer_caps) \ |
| WMI_TDLS_PEER_SET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_BK_FLAG) |
| #define WMI_GET_TDLS_PEER_BK_UAPSD(ppeer_caps) \ |
| WMI_TDLS_PEER_GET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_BK_FLAG) |
| #define WMI_SET_TDLS_PEER_BE_UAPSD(ppeer_caps) \ |
| WMI_TDLS_PEER_SET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_BE_FLAG) |
| #define WMI_GET_TDLS_PEER_BE_UAPSD(ppeer_caps) \ |
| WMI_TDLS_PEER_GET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_BE_FLAG) |
| #define WMI_SET_TDLS_PEER_ACK_UAPSD(ppeer_caps) \ |
| WMI_TDLS_PEER_SET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_ACK_FLAG) |
| #define WMI_GET_TDLS_PEER_ACK_UAPSD(ppeer_caps) \ |
| WMI_TDLS_PEER_GET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_ACK_FLAG) |
| /* SP has 2 bits */ |
| #define WMI_SET_TDLS_PEER_SP_UAPSD(ppeer_caps, val) do { \ |
| (ppeer_caps)->peer_qos |= (((val)&0x3) << WMI_TDLS_QOS_SP_FLAG); \ |
| } while (0) |
| #define WMI_GET_TDLS_PEER_SP_UAPSD(ppeer_caps) \ |
| (((ppeer_caps)->peer_qos & (0x3 << WMI_TDLS_QOS_SP_FLAG)) >> WMI_TDLS_QOS_SP_FLAG) |
| |
| #define WMI_SET_TDLS_PEER_MORE_DATA_ACK_UAPSD(ppeer_caps) \ |
| WMI_TDLS_PEER_SET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_MOREDATA_FLAG) |
| #define WMI_GET_TDLS_PEER_MORE_DATA_ACK_UAPSD(ppeer_caps) \ |
| WMI_TDLS_PEER_GET_QOS_FLAG(ppeer_caps, WMI_TDLS_QOS_MOREDATA_FLAG) |
| |
| #define WMI_TDLS_SELF_SET_QOS_FLAG(pset_cmd, flag) do { \ |
| (pset_cmd)->tdls_puapsd_mask |= (1 << flag); \ |
| } while (0) |
| #define WMI_TDLS_SELF_GET_QOS_FLAG(pset_cmd, flag) \ |
| (((pset_cmd)->tdls_puapsd_mask & (1 << flag)) >> flag) |
| |
| #define WMI_SET_TDLS_SELF_VO_UAPSD(pset_cmd) \ |
| WMI_TDLS_SELF_SET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_VO_FLAG) |
| #define WMI_GET_TDLS_SELF_VO_UAPSD(pset_cmd) \ |
| WMI_TDLS_SELF_GET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_VO_FLAG) |
| #define WMI_SET_TDLS_SELF_VI_UAPSD(pset_cmd) \ |
| WMI_TDLS_SELF_SET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_VI_FLAG) |
| #define WMI_GET_TDLS_SELF_VI_UAPSD(pset_cmd) \ |
| WMI_TDLS_SELF_GET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_VI_FLAG) |
| #define WMI_SET_TDLS_SELF_BK_UAPSD(pset_cmd) \ |
| WMI_TDLS_SELF_SET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_BK_FLAG) |
| #define WMI_GET_TDLS_SELF__BK_UAPSD(pset_cmd) \ |
| WMI_TDLS_SELF_GET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_BK_FLAG) |
| #define WMI_SET_TDLS_SELF_BE_UAPSD(pset_cmd) \ |
| WMI_TDLS_SELF_SET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_BE_FLAG) |
| #define WMI_GET_TDLS_SELF_BE_UAPSD(pset_cmd) \ |
| WMI_TDLS_SELF_GET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_BE_FLAG) |
| #define WMI_SET_TDLS_SELF_ACK_UAPSD(pset_cmd) \ |
| WMI_TDLS_SELF_SET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_ACK_FLAG) |
| #define WMI_GET_TDLS_SELF_ACK_UAPSD(pset_cmd) \ |
| WMI_TDLS_SELF_GET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_ACK_FLAG) |
| /* SP has 2 bits */ |
| #define WMI_SET_TDLS_SELF_SP_UAPSD(pset_cmd, val) do { \ |
| (pset_cmd)->tdls_puapsd_mask |= (((val)&0x3) << WMI_TDLS_QOS_SP_FLAG); \ |
| } while (0) |
| #define WMI_GET_TDLS_SELF_SP_UAPSD(pset_cmd) \ |
| (((pset_cmd)->tdls_puapsd_mask & (0x3 << WMI_TDLS_QOS_SP_FLAG)) >> WMI_TDLS_QOS_SP_FLAG) |
| |
| #define WMI_SET_TDLS_SELF_MORE_DATA_ACK_UAPSD(pset_cmd) \ |
| WMI_TDLS_SELF_SET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_MOREDATA_FLAG) |
| #define WMI_GET_TDLS_SELF_MORE_DATA_ACK_UAPSD(pset_cmd) \ |
| WMI_TDLS_SELF_GET_QOS_FLAG(pset_cmd, WMI_TDLS_QOS_MOREDATA_FLAG) |
| |
| typedef struct { |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tdls_peer_update_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** new TDLS state for peer (wmi_tdls_peer_state) */ |
| A_UINT32 peer_state; |
| /* The TLV for wmi_tdls_peer_capabilities will follow. |
| * wmi_tdls_peer_capabilities peer_caps; |
| */ |
| /** Followed by the variable length TLV chan_info: |
| * wmi_channel chan_info[] */ |
| } wmi_tdls_peer_update_cmd_fixed_param; |
| |
| /* WMI_TDLS_SET_OFFCHAN_MODE_CMDID */ |
| |
| /* bitmap 20, 40, 80 or 160 MHz wide channel */ |
| #define WMI_TDLS_OFFCHAN_20MHZ 0x1 /* 20 MHz wide channel */ |
| #define WMI_TDLS_OFFCHAN_40MHZ 0x2 /* 40 MHz wide channel */ |
| #define WMI_TDLS_OFFCHAN_80MHZ 0x4 /* 80 MHz wide channel */ |
| #define WMI_TDLS_OFFCHAN_160MHZ 0x8 /* 160 MHz wide channel */ |
| |
| enum wmi_tdls_offchan_mode { |
| WMI_TDLS_ENABLE_OFFCHANNEL, |
| WMI_TDLS_DISABLE_OFFCHANNEL |
| }; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tdls_set_offchan_mode_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /** Enable/Disable TDLS offchannel */ |
| A_UINT32 offchan_mode; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /* Is peer initiator or responder of TDLS setup request */ |
| A_UINT32 is_peer_responder; |
| /* off channel number */ |
| A_UINT32 offchan_num; |
| /* off channel bandwidth bitmap, e.g. WMI_OFFCHAN_20MHZ */ |
| A_UINT32 offchan_bw_bitmap; |
| /* operating class for offchan */ |
| A_UINT32 offchan_oper_class; |
| } wmi_tdls_set_offchan_mode_cmd_fixed_param; |
| |
| /** TDLS EVENTS */ |
| enum wmi_tdls_peer_notification { |
| /** tdls discovery recommended for peer (based |
| * on tx bytes per second > tx_discover threshold) */ |
| WMI_TDLS_SHOULD_DISCOVER, |
| /** tdls link tear down recommended for peer |
| * due to tx bytes per second below tx_teardown_threshold |
| * NB: this notification sent once */ |
| WMI_TDLS_SHOULD_TEARDOWN, |
| /** tx peer TDLS link tear down complete */ |
| WMI_TDLS_PEER_DISCONNECTED, |
| /** TDLS/BT role change notification for connection tracker */ |
| WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION, |
| }; |
| |
| enum wmi_tdls_peer_reason { |
| /** tdls teardown recommended due to low transmits */ |
| WMI_TDLS_TEARDOWN_REASON_TX, |
| /** tdls link tear down recommended due to poor RSSI */ |
| WMI_TDLS_TEARDOWN_REASON_RSSI, |
| /** tdls link tear down recommended due to offchannel scan */ |
| WMI_TDLS_TEARDOWN_REASON_SCAN, |
| /** tdls peer disconnected due to peer deletion */ |
| WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE, |
| /** tdls peer disconnected due to PTR timeout */ |
| WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT, |
| /** tdls peer disconnected due wrong PTR format */ |
| WMI_TDLS_TEARDOWN_REASON_BAD_PTR, |
| /** tdls peer not responding */ |
| WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE, |
| /* |
| * tdls entered buffer STA role, TDLS connection tracker |
| * needs to handle this |
| */ |
| WMI_TDLS_ENTER_BUF_STA, |
| /* |
| * tdls exited buffer STA role, TDLS connection tracker |
| * needs to handle this |
| */ |
| WMI_TDLS_EXIT_BUF_STA, |
| /* BT entered busy mode, TDLS connection tracker needs to handle this */ |
| WMI_TDLS_ENTER_BT_BUSY_MODE, |
| /** BT exited busy mode, TDLS connection tracker needs to handle this */ |
| WMI_TDLS_EXIT_BT_BUSY_MODE, |
| }; |
| |
| /* WMI_TDLS_PEER_EVENTID */ |
| typedef struct { |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_tdls_peer_event_fixed_param */ |
| A_UINT32 tlv_header; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /** TDLS peer status (wmi_tdls_peer_notification)*/ |
| A_UINT32 peer_status; |
| /** TDLS peer reason (wmi_tdls_peer_reason) */ |
| A_UINT32 peer_reason; |
| /** unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| } wmi_tdls_peer_event_fixed_param; |
| |
| /* NOTE: wmi_vdev_mcc_bcn_intvl_change_event_fixed_param would be deprecated. Please |
| don't use this for any new implementations */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_vdev_mcc_bcn_intvl_change_event_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /* New beacon interval to be used for the specified VDEV suggested by firmware */ |
| A_UINT32 new_bcn_intvl; |
| } wmi_vdev_mcc_bcn_intvl_change_event_fixed_param; |
| |
| /* WMI_RESMGR_ADAPTIVE_OCS_ENABLE_DISABLE_CMDID */ |
| typedef struct { |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_resmgr_adaptive_ocs_enable_disable_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** 1: enable fw based adaptive ocs, |
| * 0: disable fw based adaptive ocs |
| */ |
| A_UINT32 enable; |
| /** This field contains the MAC identifier in order to lookup the appropriate OCS instance. */ |
| union { |
| /* OBSOLETE - will be removed once all refs are gone */ |
| A_UINT32 mac_id; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| }; |
| } wmi_resmgr_adaptive_ocs_enable_disable_cmd_fixed_param; |
| |
| /* WMI_RESMGR_SET_CHAN_TIME_QUOTA_CMDID */ |
| typedef struct { |
| /* Frequency of the channel for which the quota is set */ |
| A_UINT32 chan_mhz; |
| /* Requested channel time quota expressed as percentage */ |
| A_UINT32 channel_time_quota; |
| } wmi_resmgr_chan_time_quota; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_resmgr_set_chan_time_quota_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** number of channel time quota command structures |
| * (wmi_resmgr_chan_time_quota) 1 or 2 |
| */ |
| A_UINT32 num_chans; |
| /* This TLV is followed by another TLV of array of bytes |
| * A_UINT8 data[]; |
| * This data array contains |
| * num_chans * size of(struct wmi_resmgr_chan_time_quota) |
| */ |
| } wmi_resmgr_set_chan_time_quota_cmd_fixed_param; |
| |
| /* WMI_RESMGR_SET_CHAN_LATENCY_CMDID */ |
| typedef struct { |
| /* Frequency of the channel for which the latency is set */ |
| A_UINT32 chan_mhz; |
| /* Requested channel latency in milliseconds */ |
| A_UINT32 latency; |
| } wmi_resmgr_chan_latency; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_resmgr_set_chan_latency_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** number of channel latency command structures |
| * (wmi_resmgr_chan_latency) 1 or 2 |
| */ |
| A_UINT32 num_chans; |
| /* This TLV is followed by another TLV of array of bytes |
| * A_UINT8 data[]; |
| * This data array contains |
| * num_chans * size of(struct wmi_resmgr_chan_latency) |
| */ |
| } wmi_resmgr_set_chan_latency_cmd_fixed_param; |
| |
| /* WMI_STA_SMPS_FORCE_MODE_CMDID */ |
| |
| /** STA SMPS Forced Mode */ |
| typedef enum { |
| WMI_SMPS_FORCED_MODE_NONE = 0, |
| WMI_SMPS_FORCED_MODE_DISABLED, |
| WMI_SMPS_FORCED_MODE_STATIC, |
| WMI_SMPS_FORCED_MODE_DYNAMIC |
| } wmi_sta_smps_forced_mode; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_sta_smps_force_mode_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /** The mode of SMPS that is to be forced in the FW. */ |
| A_UINT32 forced_mode; |
| } wmi_sta_smps_force_mode_cmd_fixed_param; |
| |
| /** wlan HB commands */ |
| #define WMI_WLAN_HB_ITEM_UDP 0x1 |
| #define WMI_WLAN_HB_ITEM_TCP 0x2 |
| #define WMI_WLAN_HB_MAX_FILTER_SIZE 32 /* should be equal to WLAN_HB_MAX_FILTER_SIZE, must be a multiple of 4 bytes */ |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_hb_set_enable_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 enable; |
| A_UINT32 item; |
| A_UINT32 session; |
| } wmi_hb_set_enable_cmd_fixed_param; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_hb_set_tcp_params_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 srv_ip; |
| A_UINT32 dev_ip; |
| A_UINT32 seq; |
| A_UINT32 src_port; |
| A_UINT32 dst_port; |
| A_UINT32 interval; |
| A_UINT32 timeout; |
| A_UINT32 session; |
| wmi_mac_addr gateway_mac; |
| } wmi_hb_set_tcp_params_cmd_fixed_param; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_hb_set_tcp_pkt_filter_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 length; |
| A_UINT32 offset; |
| A_UINT32 session; |
| A_UINT8 filter[WMI_WLAN_HB_MAX_FILTER_SIZE]; |
| } wmi_hb_set_tcp_pkt_filter_cmd_fixed_param; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_hb_set_udp_params_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 srv_ip; |
| A_UINT32 dev_ip; |
| A_UINT32 src_port; |
| A_UINT32 dst_port; |
| A_UINT32 interval; |
| A_UINT32 timeout; |
| A_UINT32 session; |
| wmi_mac_addr gateway_mac; |
| } wmi_hb_set_udp_params_cmd_fixed_param; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_hb_set_udp_pkt_filter_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 length; |
| A_UINT32 offset; |
| A_UINT32 session; |
| A_UINT8 filter[WMI_WLAN_HB_MAX_FILTER_SIZE]; |
| } wmi_hb_set_udp_pkt_filter_cmd_fixed_param; |
| |
| /** wlan HB events */ |
| typedef enum { |
| WMI_WLAN_HB_REASON_UNKNOWN = 0, |
| WMI_WLAN_HB_REASON_TCP_TIMEOUT = 1, |
| WMI_WLAN_HB_REASON_UDP_TIMEOUT = 2, |
| } WMI_HB_WAKEUP_REASON; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_hb_ind_event_fixed_param */ |
| A_UINT32 vdev_id; /* unique id identifying the VDEV */ |
| A_UINT32 session; /* Session ID from driver */ |
| A_UINT32 reason; /* wakeup reason */ |
| } wmi_hb_ind_event_fixed_param; |
| |
| /** WMI_STA_SMPS_PARAM_CMDID */ |
| typedef enum { |
| /** RSSI threshold to enter Dynamic SMPS mode from inactive mode */ |
| WMI_STA_SMPS_PARAM_UPPER_RSSI_THRESH = 0, |
| /** RSSI threshold to enter Stalled-D-SMPS mode from D-SMPS mode or |
| * to enter D-SMPS mode from Stalled-D-SMPS mode */ |
| WMI_STA_SMPS_PARAM_STALL_RSSI_THRESH = 1, |
| /** RSSI threshold to disable SMPS modes */ |
| WMI_STA_SMPS_PARAM_LOWER_RSSI_THRESH = 2, |
| /** Upper threshold for beacon-RSSI. Used to reduce RX chainmask. */ |
| WMI_STA_SMPS_PARAM_UPPER_BRSSI_THRESH = 3, |
| /** Lower threshold for beacon-RSSI. Used to increase RX chainmask. */ |
| WMI_STA_SMPS_PARAM_LOWER_BRSSI_THRESH = 4, |
| /** Enable/Disable DTIM 1chRx feature */ |
| WMI_STA_SMPS_PARAM_DTIM_1CHRX_ENABLE = 5 |
| } wmi_sta_smps_param; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_sta_smps_param_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /** SMPS parameter (see wmi_sta_smps_param) */ |
| A_UINT32 param; |
| /** Value of SMPS parameter */ |
| A_UINT32 value; |
| } wmi_sta_smps_param_cmd_fixed_param; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_mcc_sched_sta_traffic_stats */ |
| A_UINT32 tlv_header; |
| /* TX stats */ |
| A_UINT32 txBytesPushed; |
| A_UINT32 txPacketsPushed; |
| /* RX stats */ |
| A_UINT32 rxBytesRcvd; |
| A_UINT32 rxPacketsRcvd; |
| A_UINT32 rxTimeTotal; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| } wmi_mcc_sched_sta_traffic_stats; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_mcc_sched_traffic_stats_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** Duration over which the host stats were collected */ |
| A_UINT32 duration; |
| /** Number of stations filled in following stats array */ |
| A_UINT32 num_sta; |
| /* Following this struct are the TLVs: |
| * wmi_mcc_sched_sta_traffic_stats mcc_sched_sta_traffic_stats_list; |
| */ |
| } wmi_mcc_sched_traffic_stats_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_batch_scan_enable_cmd_fixed_param */ |
| /* unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /*Batch scan enable command parameters */ |
| A_UINT32 scanInterval; |
| A_UINT32 numScan2Batch; |
| A_UINT32 bestNetworks; |
| A_UINT32 rfBand; |
| A_UINT32 rtt; |
| } wmi_batch_scan_enable_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_batch_scan_enabled_event_fixed_param */ |
| A_UINT32 supportedMscan; |
| } wmi_batch_scan_enabled_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_batch_scan_disable_cmd_fixed_param */ |
| /* unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| A_UINT32 param; |
| } wmi_batch_scan_disable_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_batch_scan_trigger_result_cmd_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| A_UINT32 param; |
| } wmi_batch_scan_trigger_result_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| wmi_mac_addr bssid; /* BSSID */ |
| wmi_ssid ssid; /* SSID */ |
| A_UINT32 ch; /* Channel */ |
| A_UINT32 rssi; /* RSSI or Level */ |
| /* Timestamp when Network was found. Used to calculate age based on timestamp in GET_RSP msg header */ |
| A_UINT32 timestamp; |
| } wmi_batch_scan_result_network_info; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 scanId; /* Scan List ID. */ |
| /* No of AP in a Scan Result. Should be same as bestNetwork in SET_REQ msg */ |
| A_UINT32 numNetworksInScanList; |
| A_UINT32 netWorkStartIndex; /* indicate the start index of network info */ |
| } wmi_batch_scan_result_scan_list; |
| |
| #define LPI_IE_BITMAP_BSSID 0x00000001 /* if this bit is set, bssid of the scan response frame is sent as the first IE in the data buffer sent to LOWI LP.*/ |
| #define LPI_IE_BITMAP_IS_PROBE 0x00000002 /*send true or false based on scan response frame being a Probe Rsp or not*/ |
| #define LPI_IE_BITMAP_SSID 0x00000004 /*send ssid from received scan response frame*/ |
| #define LPI_IE_BITMAP_RSSI 0x00000008 /* end RSSI value reported by HW for the received scan response after adjusting with noise floor*/ |
| #define LPI_IE_BITMAP_CHAN 0x00000010 /*send channel number from the received scan response*/ |
| #define LPI_IE_BITMAP_AP_TX_PWR 0x00000020 /* sen Tx power from TPC IE of scan rsp*/ |
| #define LPI_IE_BITMAP_TX_RATE 0x00000040 /*send rate of the received frame as reported by HW.*/ |
| #define LPI_IE_BITMAP_80211_MC_SUPPORT 0x00000080 /*send true or false based on the received scan rsp was from a 11mc supported AP or not.*/ |
| #define LPI_IE_BITMAP_TSF_TIMER_VALUE 0x00000100 /*send timestamp reported in the received scan rsp frame.*/ |
| #define LPI_IE_BITMAP_AGE_OF_MEASUREMENT 0x00000200 /* current system time - received time) = duration of time scan rsp frame data is kept in the buffer before sending to LOWI LP.*/ |
| /* |
| * TEMPORARY alias of incorrect old name the correct name. |
| * This alias will be removed once all references to the old name have been fixed. |
| */ |
| #define LPI_IE_BITMAP_AGE_OF_MESAUREMENT LPI_IE_BITMAP_AGE_OF_MEASUREMENT |
| #define LPI_IE_BITMAP_CONN_STATUS 0x00000400 /* If an infra STA is active and connected to an AP, true value is sent else false.*/ |
| #define LPI_IE_BITMAP_MSAP_IE 0x00000800 /* info on the vendor specific proprietary IE MSAP*/ |
| #define LPI_IE_BITMAP_SEC_STATUS 0x00001000 /* we indicate true or false based on if the AP has WPA or RSN security enabled*/ |
| #define LPI_IE_BITMAP_DEVICE_TYPE 0x00002000 /* info about the beacons coming from an AP or P2P or NAN device.*/ |
| #define LPI_IE_BITMAP_CHAN_IS_PASSIVE 0x00004000 /* info on whether the scan rsp was received from a passive channel*/ |
| #define LPI_IE_BITMAP_DWELL_TIME 0x00008000 /* send the scan dwell time of the channel on which the current scan rsp frame was received.*/ |
| #define LPI_IE_BITMAP_BAND_CENTER_FREQ1 0x00010000 /* the center frequencies in case AP is supporting wider channels than 20 MHz*/ |
| #define LPI_IE_BITMAP_BAND_CENTER_FREQ2 0x00020000 /* same as above*/ |
| #define LPI_IE_BITMAP_PHY_MODE 0x00040000 /* PHY mode indicates a, b, ,g, ac and other combinations*/ |
| #define LPI_IE_BITMAP_SCAN_MODULE_ID 0x00080000 /* scan module id indicates the scan client who originated the scan*/ |
| #define LPI_IE_BITMAP_SCAN_ID 0x00100000 /*extscan inserts the scan cycle count for this value; other scan clients can insert the scan id of the scan, if needed.*/ |
| #define LPI_IE_BITMAP_FLAGS 0x00200000 /* reserved as a bitmap to indicate more scan information; one such use being to indicate if the on-going scan is interrupted or not*/ |
| #define LPI_IE_BITMAP_CACHING_REQD 0x00400000 /*extscan will use this field to indicate if this frame info needs to be cached in LOWI LP or not*/ |
| /* |
| * extscan will use this field to indicate to |
| * LOWI LP whether to report result to context hub or not |
| */ |
| #define LPI_IE_BITMAP_REPORT_CONTEXT_HUB 0x00800000 |
| #define LPI_IE_BITMAP_ALL 0xFFFFFFFF |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /**A_BOOL indicates LPI mgmt snooping enable/disable*/ |
| A_UINT32 enable; |
| /**LPI snooping mode*/ |
| A_UINT32 snooping_mode; |
| /** LPI interested IEs in snooping context */ |
| A_UINT32 ie_bitmap; |
| } wmi_lpi_mgmt_snooping_config_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_start_scan_cmd_fixed_param */ |
| /** Scan ID */ |
| A_UINT32 scan_id; |
| /** Scan requestor ID */ |
| A_UINT32 scan_req_id; |
| /** VDEV id(interface) that is requesting scan */ |
| A_UINT32 vdev_id; |
| /** LPI interested IEs in scan context */ |
| A_UINT32 ie_bitmap; |
| /** Scan Priority, input to scan scheduler */ |
| A_UINT32 scan_priority; |
| /** dwell time in msec on active channels */ |
| A_UINT32 dwell_time_active; |
| /** dwell time in msec on passive channels */ |
| A_UINT32 dwell_time_passive; |
| /** min time in msec on the BSS channel,only valid if atleast one VDEV is active*/ |
| A_UINT32 min_rest_time; |
| /** max rest time in msec on the BSS channel,only valid if at least one VDEV is active*/ |
| /** the scanner will rest on the bss channel at least min_rest_time. after min_rest_time the scanner |
| * will start checking for tx/rx activity on all VDEVs. if there is no activity the scanner will |
| * switch to off channel. if there is activity the scanner will let the radio on the bss channel |
| * until max_rest_time expires.at max_rest_time scanner will switch to off channel |
| * irrespective of activity. activity is determined by the idle_time parameter. |
| */ |
| A_UINT32 max_rest_time; |
| /** time before sending next set of probe requests. |
| * The scanner keeps repeating probe requests transmission with period specified by repeat_probe_time. |
| * The number of probe requests specified depends on the ssid_list and bssid_list |
| */ |
| A_UINT32 repeat_probe_time; |
| /** time in msec between 2 consequetive probe requests with in a set. */ |
| A_UINT32 probe_spacing_time; |
| /** data inactivity time in msec on bss channel that will be used by scanner for measuring the inactivity */ |
| A_UINT32 idle_time; |
| /** maximum time in msec allowed for scan */ |
| A_UINT32 max_scan_time; |
| /** delay in msec before sending first probe request after switching to a channel */ |
| A_UINT32 probe_delay; |
| /** Scan control flags */ |
| A_UINT32 scan_ctrl_flags; |
| /** Burst duration time in msec*/ |
| A_UINT32 burst_duration; |
| |
| /** # if channels to scan. In the TLV channel_list[] */ |
| A_UINT32 num_chan; |
| /** number of bssids. In the TLV bssid_list[] */ |
| A_UINT32 num_bssid; |
| /** number of ssid. In the TLV ssid_list[] */ |
| A_UINT32 num_ssids; |
| /** number of bytes in ie data. In the TLV ie_data[] */ |
| A_UINT32 ie_len; |
| |
| /** |
| * TLV (tag length value ) parameters follow the scan_cmd |
| * structure. The TLV's are: |
| * A_UINT32 channel_list[]; |
| * wmi_ssid ssid_list[]; |
| * wmi_mac_addr bssid_list[]; |
| * A_UINT8 ie_data[]; |
| */ |
| } wmi_lpi_start_scan_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_stop_scan_cmd_fixed_param */ |
| /** Scan requestor ID */ |
| A_UINT32 scan_req_id; |
| /** Scan ID */ |
| A_UINT32 scan_id; |
| /** |
| * Req Type |
| * req_type should be WMI_SCAN_STOP_ONE, WMI_SCN_STOP_VAP_ALL or WMI_SCAN_STOP_ALL |
| * WMI_SCAN_STOP_ONE indicates to stop a specific scan with scan_id |
| * WMI_SCN_STOP_VAP_ALL indicates to stop all scan requests on a specific vDev with vdev_id |
| * WMI_SCAN_STOP_ALL indicates to stop all scan requests in both Scheduler's queue and Scan Engine |
| */ |
| A_UINT32 req_type; |
| /** |
| * vDev ID |
| * used when req_type equals to WMI_SCN_STOP_VAP_ALL, it indexed the vDev on which to stop the scan |
| */ |
| A_UINT32 vdev_id; |
| } wmi_lpi_stop_scan_cmd_fixed_param; |
| |
| typedef enum { |
| WMI_LPI_DEVICE_TYPE_AP = 1, |
| WMI_LPI_DEVICE_TYPE_P2P = 2, |
| WMI_LPI_DEVICE_TYPE_NAN = 3, |
| } wmi_lpi_device_type; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** Scan requestor ID */ |
| A_UINT32 scan_req_id; |
| A_UINT32 ie_bitmap; |
| A_UINT32 data_len; |
| } wmi_lpi_result_event_fixed_param; |
| |
| typedef enum { |
| /** User scan Request completed */ |
| WMI_LPI_STATUS_SCAN_REQ_COMPLED = 0, |
| /** User Request was never serviced */ |
| WMI_LPI_STATUS_DROPPED_REQ = 1, |
| /** Illegal channel Req */ |
| WMI_LPI_STATUS_ILLEGAL_CHAN_REQ = 2, |
| /** Illegal Operation Req */ |
| WMI_LPI_STATUS_ILLEGAL_OPER_REQ = 3, |
| /** Request Aborted */ |
| WMI_LPI_STATUS_REQ_ABORTED = 4, |
| /** Request Timed Out */ |
| WMI_LPI_STATUS_REQ_TIME_OUT = 5, |
| /** Medium Busy, already there |
| * is a scan is going on */ |
| WMI_LPI_STATUS_MEDIUM_BUSY = 6, |
| /* Extscan is the scan client whose scan complete event is triggered */ |
| WMI_LPI_STATUS_EXTSCAN_CYCLE_AND_SCAN_REQ_COMPLETED = 7, |
| } wmi_lpi_staus; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| wmi_lpi_staus status; |
| /** Scan requestor ID */ |
| A_UINT32 scan_req_id; |
| } wmi_lpi_status_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| wmi_mac_addr bssid; |
| wmi_ssid ssid; |
| A_UINT32 freq; |
| A_UINT32 rssi; |
| A_UINT32 vdev_id; |
| } wmi_lpi_handoff_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 timestamp; /*timestamp of batch scan event */ |
| A_UINT32 numScanLists; /*number of scan in this event */ |
| A_UINT32 isLastResult; /*is this event a last event of the whole batch scan */ |
| } wmi_batch_scan_result_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_p2p_noa_event_fixed_param */ |
| A_UINT32 vdev_id; |
| /* This TLV is followed by p2p_noa_info for vdev : |
| * wmi_p2p_noa_info p2p_noa_info; |
| */ |
| } wmi_p2p_noa_event_fixed_param; |
| |
| #define WMI_RFKILL_CFG_RADIO_LEVEL_OFFSET 6 |
| #define WMI_RFKILL_CFG_RADIO_LEVEL_MASK 0x1 |
| |
| #define WMI_RFKILL_CFG_GPIO_PIN_NUM_OFFSET 0 |
| #define WMI_RFKILL_CFG_GPIO_PIN_NUM_MASK 0x3f |
| |
| #define WMI_RFKILL_CFG_PIN_AS_GPIO_OFFSET 7 |
| #define WMI_RFKILL_CFG_PIN_AS_GPIO_MASK 0xf |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * */ |
| A_UINT32 tlv_header; |
| /** gpip pin number */ |
| A_UINT32 gpio_pin_num; |
| /** gpio interupt type */ |
| A_UINT32 int_type; |
| /** RF radio status */ |
| A_UINT32 radio_state; |
| } wmi_rfkill_mode_param; |
| |
| typedef enum { |
| WMI_SET_LED_SYS_POWEROFF, |
| WMI_SET_LED_SYS_S3_SUSPEND, |
| WMI_SET_LED_SYS_S4_S5, |
| WMI_SET_LED_SYS_DRIVER_DISABLE, |
| WMI_SET_LED_SYS_WAKEUP, |
| WMI_SET_LED_SYS_ALWAYS_ON, /* just for test! */ |
| WMI_SET_LED_SYS_POWERON, |
| } wmi_led_sys_state_param; |
| |
| typedef enum { |
| WMI_CONFIG_LED_TO_VDD = 0, |
| WMI_CONFIG_LED_TO_GND = 1, |
| } wmi_config_led_connect_type; |
| |
| typedef enum { |
| WMI_CONFIG_LED_NOT_WITH_BT = 0, |
| WMI_CONFIG_LED_WITH_BT = 1, |
| } wmi_config_led_with_bt_flag; |
| |
| typedef enum { |
| WMI_CONFIG_LED_DISABLE = 0, |
| WMI_CONFIG_LED_ENABLE = 1, |
| } wmi_config_led_enable_flag; |
| |
| typedef enum { |
| WMI_CONFIG_LED_HIGH_UNSPECIFIED = 0, |
| WMI_CONFIG_LED_HIGH_OFF = 1, |
| WMI_CONFIG_LED_HIGH_ON = 2, |
| } wmi_config_led_on_flag; |
| |
| typedef enum { |
| WMI_CONFIG_LED_UNSPECIFIED = 0, |
| WMI_CONFIG_LED_ON = 1, |
| WMI_CONFIG_LED_OFF = 2, |
| WMI_CONFIG_LED_DIM = 3, |
| WMI_CONFIG_LED_BLINK = 4, |
| WMI_CONFIG_LED_TXRX = 5, |
| } wmi_config_led_operation_type; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_set_led_config_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /* Set GPIO pin */ |
| A_UINT32 led_gpio_pin; |
| /* Set connect type defined in wmi_config_led_connect_type */ |
| A_UINT32 connect_type; |
| /* Set flag defined in wmi_config_led_with_bt_flag */ |
| A_UINT32 with_bt; |
| /* Set LED enablement defined in wmi_config_led_enable_flag */ |
| A_UINT32 led_enable; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| /* see wmi_config_led_operation_type enum */ |
| A_UINT32 led_operation_type; |
| /* see wmi_config_led_on_flag enum */ |
| A_UINT32 led_on_flag; /* configure high/low on/off sense */ |
| A_UINT32 led_on_interval; /* for blink function; unit: ms */ |
| A_UINT32 led_off_interval; /* for blink function; unit: ms */ |
| A_UINT32 led_repeat_cnt; /* for blink function: how many blinks */ |
| } wmi_pdev_set_led_config_cmd_fixed_param; |
| |
| #define WMI_WNTS_CFG_GPIO_PIN_NUM_OFFSET 0 |
| #define WMI_WNTS_CFG_GPIO_PIN_NUM_MASK 0xff |
| |
| /** WMI_PEER_INFO_REQ_CMDID |
| * Request FW to provide peer info */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_peer_info_req_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** In order to get the peer info for a single peer, host shall |
| * issue the peer_mac_address of that peer. For getting the |
| * info all peers, the host shall issue 0xFFFFFFFF as the mac |
| * address. The firmware will return the peer info for all the |
| * peers on the specified vdev_id */ |
| wmi_mac_addr peer_mac_address; |
| /** vdev id */ |
| A_UINT32 vdev_id; |
| } wmi_peer_info_req_cmd_fixed_param; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_peer_info */ |
| A_UINT32 tlv_header; |
| /** mac addr of the peer */ |
| wmi_mac_addr peer_mac_address; |
| /** data_rate of the peer */ |
| A_UINT32 data_rate; |
| /** rssi of the peer */ |
| A_UINT32 rssi; |
| /** tx fail count */ |
| A_UINT32 tx_fail_cnt; |
| } wmi_peer_info; |
| |
| /** FW response with the peer info */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_peer_info_event_fixed_param */ |
| A_UINT32 tlv_header; |
| /** number of peers in peer_info */ |
| A_UINT32 num_peers; |
| /* Set to 1 only if vdev_id field is valid */ |
| A_UINT32 valid_vdev_id; |
| /* VDEV to which the peer belongs to */ |
| A_UINT32 vdev_id; |
| /* This TLV is followed by another TLV of array of structs |
| * wmi_peer_info peer_info[]; |
| */ |
| } wmi_peer_info_event_fixed_param; |
| |
| /** FW response when tx failure count has reached threshold |
| * for a peer */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_peer_tx_fail_cnt_thr_event_fixed_param */ |
| A_UINT32 tlv_header; |
| /** vdev id*/ |
| A_UINT32 vdev_id; |
| /** mac address */ |
| wmi_mac_addr peer_mac_address; |
| /** tx failure count- will eventually be removed and not used * */ |
| A_UINT32 tx_fail_cnt; |
| /** seq number of the nth tx_fail_event */ |
| A_UINT32 seq_no; |
| } wmi_peer_tx_fail_cnt_thr_event_fixed_param; |
| |
| enum wmi_rmc_mode { |
| /** Disable RMC */ |
| WMI_RMC_MODE_DISABLED = 0, |
| /** Enable RMC */ |
| WMI_RMC_MODE_ENABLED = 1, |
| }; |
| |
| /** Enable RMC transmitter functionality. Upon |
| * receiving this, the FW shall mutlicast frames with |
| * reliablity. This is a vendor |
| * proprietary feature. */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_rmc_set_mode_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** vdev id*/ |
| A_UINT32 vdev_id; |
| /** enable_rmc contains values from enum wmi_rmc_mode; |
| * Default value: 0 (disabled) */ |
| A_UINT32 enable_rmc; |
| } wmi_rmc_set_mode_cmd_fixed_param; |
| |
| /** Configure transmission periodicity of action frames in a |
| * RMC network for the multicast transmitter */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_rmc_set_action_period_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** vdev id */ |
| A_UINT32 vdev_id; |
| /** time period in milliseconds. Default: 300 ms. |
| An action frame indicating the current leader is transmitted by the |
| RMC transmitter once every 'periodity_msec' */ |
| A_UINT32 periodicity_msec; |
| } wmi_rmc_set_action_period_cmd_fixed_param; |
| |
| /** Optimise Leader selection process in RMC functionality. For |
| * Enhancement/Debug purposes only */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_rmc_config_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** vdev id */ |
| A_UINT32 vdev_id; |
| /** flags :: |
| * 0x0001 - Enable beacon averaging |
| * 0x0002 - Force leader selection |
| * 0x0004 - Enable Timer based leader switch |
| * 0x0008 - Use qos/NULL based for multicast reliability */ |
| A_UINT32 flags; |
| /** control leader change timeperiod (in seconds) */ |
| A_UINT32 peridocity_leader_switch; |
| /** control activity timeout value for data rx (in seconds) */ |
| A_UINT32 data_activity_timeout; |
| /** mac address of leader */ |
| wmi_mac_addr forced_leader_mac_addr; |
| } wmi_rmc_config_cmd_fixed_param; |
| |
| /** MHF is generally implemented in |
| * the kernel. To decrease system power consumption, the |
| * driver can enable offloading this to the chipset. In |
| * order for the offload, the firmware needs the routing table. |
| * The host shall plumb the routing table into FW. The firmware |
| * shall perform an IP address lookup and forward the packet to |
| * the next hop using next hop's mac address. This is a vendor |
| * proprietary feature. */ |
| enum wmi_mhf_ofl_mode { |
| /** Disable MHF offload */ |
| WMI_MHF_OFL_MODE_DISABLED = 0, |
| /** Enable MHF offload */ |
| WMI_MHF_OFL_MODE_ENABLED = 1, |
| }; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_mhf_offload_set_mode_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** vdev id*/ |
| A_UINT32 vdev_id; |
| /** enable_mhf_ofl contains values from enum |
| * wmi_mhf_ofl_mode; Default value: 0 (disabled) */ |
| A_UINT32 enable_mhf_ofl; |
| } wmi_mhf_offload_set_mode_cmd_fixed_param; |
| |
| enum wmi_mhf_ofl_table_action { |
| /** Create forwarding offload table in FW */ |
| WMI_MHF_OFL_TBL_CREATE = 0, |
| /** Append to existing MHF offload table */ |
| WMI_MHF_OFL_TBL_APPEND = 1, |
| /** Flush entire MHF offload table in FW */ |
| WMI_MHF_OFL_TBL_FLUSH = 2, |
| }; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_mhf_offload_plumb_routing_table_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** vdev id*/ |
| A_UINT32 vdev_id; |
| /** action corresponds to values from enum |
| * wmi_mhf_ofl_table_action */ |
| A_UINT32 action; |
| /** number of entries in the table */ |
| A_UINT32 num_entries; |
| /** Followed by the variable length TLV |
| * wmi_mhf_offload_routing_table_entry entries[] */ |
| } wmi_mhf_offload_plumb_routing_table_cmd; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_mhf_offload_routing_table_entry */ |
| A_UINT32 tlv_header; |
| /** Destination node's IP address */ |
| WMI_IPV4_ADDR dest_ipv4_addr; |
| /** Next hop node's MAC address */ |
| wmi_mac_addr next_hop_mac_addr; |
| } wmi_mhf_offload_routing_table_entry; |
| |
| typedef struct { |
| /** tlv tag and len, tag equals |
| * WMITLV_TAG_STRUC_wmi_dfs_radar_event */ |
| A_UINT32 tlv_header; |
| |
| /** full 64 tsf timestamp get from MAC tsf timer indicates |
| * the time that the radar event uploading to host, split |
| * it to high 32 bit and lower 32 bit in fulltsf_high and |
| * full_tsf_low |
| */ |
| A_UINT32 upload_fullts_low; |
| A_UINT32 upload_fullts_high; |
| |
| /** timestamp indicates the time when DFS pulse is detected |
| * equal to ppdu_end_ts - radar_pusle_summary_ts_offset |
| */ |
| A_UINT32 pulse_detect_ts; |
| |
| /** the duaration of the pulse in us */ |
| A_UINT32 pulse_duration; |
| |
| /** the center frequency of the radar pulse detected, KHz */ |
| A_UINT32 pulse_center_freq; |
| |
| /** bandwidth of current DFS channel, MHz */ |
| A_UINT32 ch_bandwidth; |
| |
| /** center channel frequency1 of current DFS channel, MHz */ |
| A_UINT16 ch_center_freq1; |
| |
| /** center channel frequency2 of current DFS channel, MHz, |
| * reserved for 160 BW mode |
| */ |
| A_UINT16 ch_center_freq2; |
| |
| /** flag to indicate if this pulse is chirp */ |
| A_UINT8 pulse_is_chirp; |
| |
| /** RSSI recorded in the ppdu */ |
| A_UINT8 rssi; |
| |
| /** extened RSSI info */ |
| A_UINT8 rssi_ext; |
| |
| /** For 4-byte aligment padding */ |
| A_UINT8 reserved; |
| |
| union { |
| /* OBSOLETE - will be removed once all refs are gone */ |
| A_UINT8 pmac_id; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT8 pdev_id; |
| }; |
| |
| /** index of peak magnitude bin (signed) */ |
| A_INT32 peak_sidx; |
| |
| } wmi_dfs_radar_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_thermal_mgmt_cmd_fixed_param */ |
| |
| /*Thermal thresholds */ |
| A_UINT32 lower_thresh_degreeC; /* in degree C */ |
| A_UINT32 upper_thresh_degreeC; /* in degree C */ |
| |
| /*Enable/Disable Thermal Monitoring for Mitigation */ |
| A_UINT32 enable; |
| } wmi_thermal_mgmt_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_thermal_mgmt_event_fixed_param */ |
| |
| A_UINT32 temperature_degreeC; /* temperature in degree C */ |
| } wmi_thermal_mgmt_event_fixed_param; |
| |
| /** |
| * This command is sent from WLAN host driver to firmware to |
| * request firmware to configure auto shutdown timer in fw |
| * 0 - Disable <1-19600>-Enabled and timer value is seconds (86400 seconds = 1 day maximum> |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_host_auto_shutdown_cfg_cmd_param */ |
| A_UINT32 timer_value; |
| /** timer value; 0=disable */ |
| } wmi_host_auto_shutdown_cfg_cmd_fixed_param; |
| |
| enum wmi_host_auto_shutdown_reason { |
| WMI_HOST_AUTO_SHUTDOWN_REASON_UNKNOWN = 0, |
| WMI_HOST_AUTO_SHUTDOWN_REASON_TIMER_EXPIRY = 1, |
| WMI_HOST_AUTO_SHUTDOWN_REASON_MAX, |
| }; |
| |
| /* WMI_HOST_AUTO_SHUTDOWN_EVENTID */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_host_auto_shutdown_event_fixed_param */ |
| A_UINT32 shutdown_reason; /* value: wmi_host_auto_shutdown_reason */ |
| } wmi_host_auto_shutdown_event_fixed_param; |
| |
| /** New WMI command to support TPC CHAINMASK ADJUSTMENT ACCORDING TO a set of conditions specified in the command. |
| * fw will save c tpc offset/chainmask along with conditions and adjust tpc/chainmask when condition meet. |
| * This command is only used by some customer for verification test. It is not for end-user. |
| * |
| * array of wmi_tpc_chainmask_config structures are passed with the command to specify multiple conditions. |
| * |
| * The set of conditions include bt status, stbc status, band, phy_mode, 1stream/2streams, channel, rate. when all these conditions meet, |
| * the output(tpc_offset,chainmask) will be applied on per packet basis. ack_offset is applied based on channel condtion only. When multiple |
| * conditions has the same channel ,then the first ack_offset will be applied. It is better for host driver to make sure the |
| * <channel, ack_offset> pair is unique. |
| * |
| * the conditions (bt status, stbc status, band, phy_mode, 1steam/2streams, tpc_offset, ack_offset, chainmask) are combinedi into a single word |
| * called basic_config_info by bitmap |
| * to save memory. And channel & rate info will be tracked by 'channel' field and 'rate0', 'rate1' field because of its large combination. |
| * |
| * 'rate bit' or 'channel bit' field of basic_config_info indicate validity of the channel and rate fields.if rate bit is 0 then the rate field |
| * is ignored. |
| * disable will remove preious conditions from FW. |
| * conditions from the later command will over write conditions stored from a previous command. |
| * |
| */ |
| |
| #define WMI_TPC_CHAINMASK_CONFIG_BT_ON_OFF 0 /** dont' care the bt status */ |
| #define WMI_TPC_CHAINMASK_CONFIG_BT_ON 1 /** apply only when bt on */ |
| #define WMI_TPC_CHAINMASK_CONFIG_BT_OFF 2 /** apply only when bt off */ |
| #define WMI_TPC_CHAINMASK_CONFIG_BT_RESV1 3 /** reserved */ |
| |
| #define WMI_TPC_CHAINMASK_CONFIG_CHAINMASK_DONT_CARE 0 /** don't care the chainmask */ |
| #define WMI_TPC_CHAINMASK_CONFIG_CHAINMASK_CHAIN0 1 /** force to use Chain0 to send */ |
| #define WMI_TPC_CHAINMASK_CONFIG_CHAINMASK_CHAIN1 2 /** force to use Chain1 to send */ |
| #define WMI_TPC_CHAINMASK_CONFIG_CHAINMASK_CHAIN0_CHAIN1 3 /** force to use Chain0 & Chain1 to send */ |
| |
| #define WMI_TPC_CHAINMASK_CONFIG_STBC_ON_OFF 0 /** don't care about stbc */ |
| #define WMI_TPC_CHAINMASK_CONFIG_STBC_ON 1 /** apply only when stbc on */ |
| #define WMI_TPC_CHAINMASK_CONFIG_STBC_OFF 2 /** apply only when stbc off */ |
| #define WMI_TPC_CHAINMASK_CONFIG_STBC_RESV1 3 /** reserved */ |
| |
| #define WMI_TPC_CHAINMASK_CONFIG_BAND_2G 0 /** 2G */ |
| #define WMI_TPC_CHAINMASK_CONFIG_BAND_5G 1 /** 5G */ |
| |
| #define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11B_2G 0 /** 11b 2G */ |
| #define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11G_2G 1 /** 11g 2G */ |
| #define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11N_2G 2 /** 11n 2G */ |
| #define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11N_11AC_2G 3 /** 11n + 11ac 2G */ |
| #define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11A_5G 4 /** 11a 5G */ |
| #define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11N_5G 5 /** 11n 5G */ |
| #define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11AC_5G 6 /** 11ac 5G */ |
| #define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11N_11AC_5G 7 /** 11n + 11ac 5G */ |
| |
| #define WMI_TPC_CHAINMASK_CONFIG_STREAM_1 0 /** 1 stream */ |
| #define WMI_TPC_CHAINMASK_CONFIG_STREAM_2 1 /** 2 streams */ |
| |
| #define WMI_TPC_CHAINMASK_CONFIG_CHANNEL_OFF 0 /** channel field is ignored */ |
| #define WMI_TPC_CHAINMASK_CONFIG_CHANNEL_ON 1 /** channel field needs to be checked */ |
| |
| #define WMI_TPC_CHAINMASK_CONFIG_RATE_OFF 0 /** rate field is ignored */ |
| #define WMI_TPC_CHAINMASK_CONFIG_RATE_ON 1 /** rate field needs to be checked */ |
| |
| /** Bit map definition for basic_config_info starts */ |
| #define WMI_TPC_CHAINMASK_CONFIG_TPC_OFFSET_S 0 |
| #define WMI_TPC_CHAINMASK_CONFIG_TPC_OFFSET (0x1f << WMI_TPC_CHAINMASK_CONFIG_TPC_OFFSET_S) |
| #define WMI_TPC_CHAINMASK_CONFIG_TPC_OFFSET_GET(x) WMI_F_MS(x, WMI_TPC_CHAINMASK_CONFIG_TPC_OFFSET) |
| #define WMI_TPC_CHAINMASK_CONFIG_TPC_OFFSET_SET(x, z) WMI_F_RMW(x, (z) & 0x1f, WMI_TPC_CHAINMASK_CONFIG_TPC_OFFSET) |
| |
| #define WMI_TPC_CHAINMASK_CONFIG_ACK_OFFSET_S 5 |
| #define WMI_TPC_CHAINMASK_CONFIG_ACK_OFFSET (0x1f << WMI_TPC_CHAINMASK_CONFIG_ACK_OFFSET_S) |
| #define WMI_TPC_CHAINMASK_CONFIG_ACK_OFFSET_GET(x) WMI_F_MS(x, WMI_TPC_CHAINMASK_CONFIG_ACK_OFFSET) |
| #define WMI_TPC_CHAINMASK_CONFIG_ACK_OFFSET_SET(x, z) WMI_F_RMW(x, (z) & 0x1f, WMI_TPC_CHAINMASK_CONFIG_ACK_OFFSET) |
| |
| #define WMI_TPC_CHAINMASK_CONFIG_CHAINMASK_S 10 |
| #define WMI_TPC_CHAINMASK_CONFIG_CHAINMASK (0x3 << WMI_TPC_CHAINMASK_CONFIG_CHAINMASK_S) |
| #define WMI_TPC_CHAINMASK_CONFIG_CHAINMASK_GET(x) WMI_F_MS(x, WMI_TPC_CHAINMASK_CONFIG_CHAINMASK) |
| #define WMI_TPC_CHAINMASK_CONFIG_CHAINMASK_SET(x, z) WMI_F_RMW(x, (z)&0x3, WMI_TPC_CHAINMASK_CONFIG_CHAINMASK) |
| |
| #define WMI_TPC_CHAINMASK_CONFIG_BT_S 12 |
| #define WMI_TPC_CHAINMASK_CONFIG_BT (0x3 << WMI_TPC_CHAINMASK_CONFIG_BT_S) |
| #define WMI_TPC_CHAINMASK_CONFIG_BT_GET(x) WMI_F_MS(x, WMI_TPC_CHAINMASK_CONFIG_BT) |
| #define WMI_TPC_CHAINMASK_CONFIG_BT_SET(x, z) WMI_F_RMW(x, (z)&0x3, WMI_TPC_CHAINMASK_CONFIG_BT) |
| |
| #define WMI_TPC_CHAINMASK_CONFIG_STBC_S 14 |
| #define WMI_TPC_CHAINMASK_CONFIG_STBC (0x3 << WMI_TPC_CHAINMASK_CONFIG_STBC_S) |
| #define WMI_TPC_CHAINMASK_CONFIG_STBC_GET(x) WMI_F_MS(x, WMI_TPC_CHAINMASK_CONFIG_STBC) |
| #define WMI_TPC_CHAINMASK_CONFIG_STBC_SET(x, z) WMI_F_RMW(x, (z) & 0x3, WMI_TPC_CHAINMASK_CONFIG_STBC) |
| |
| #define WMI_TPC_CHAINMASK_CONFIG_BAND_S 16 |
| #define WMI_TPC_CHAINMASK_CONFIG_BAND (0x1 << WMI_TPC_CHAINMASK_CONFIG_BAND_S) |
| #define WMI_TPC_CHAINMASK_CONFIG_BAND_GET(x) WMI_F_MS(x, WMI_TPC_CHAINMASK_CONFIG_BAND) |
| #define WMI_TPC_CHAINMASK_CONFIG_BAND_SET(x, z) WMI_F_RMW(x, (z) & 0x1, WMI_TPC_CHAINMASK_CONFIG_BAND) |
| |
| #define WMI_TPC_CHAINMASK_CONFIG_STREAM_S 17 |
| #define WMI_TPC_CHAINMASK_CONFIG_STREAM (0x1 << WMI_TPC_CHAINMASK_CONFIG_STREAM_S) |
| #define WMI_TPC_CHAINMASK_CONFIG_STREAM_GET(x) WMI_F_MS(x, WMI_TPC_CHAINMASK_CONFIG_STREAM) |
| #define WMI_TPC_CHAINMASK_CONFIG_STREAM_SET(x, z) WMI_F_RMW(x, (z)&0x1, WMI_TPC_CHAINMASK_CONFIG_STREAM) |
| |
| #define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_S 18 |
| #define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE (0x7 << WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_S) |
| #define WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_GET(x) WMI_F_MS(x, WMI_TPC_CHAINMASK_CONFIG_PHY_MODE) |
| #define WMI_TPC_CHAINAMSK_CONFIG_PHY_MODE_SET(x, z) WMI_F_RMW(x, (z)&0x7, WMI_TPC_CHAINMASK_CONFIG_PHY_MODE) |
| |
| #define WMI_TPC_CHAINMASK_CONFIG_CHANNEL_S 21 |
| /* |
| * The deprecated old name (WMI_TPC_CHAINMASK_CONFIG_CHANNEL_EXIST) |
| * is temporarily maintained as an alias for the correct name |
| * (WMI_TPC_CHAINMASK_CONFIG_CHANNEL) |
| */ |
| #define WMI_TPC_CHAINMASK_CONFIG_CHANNEL_EXIST WMI_TPC_CHAINMASK_CONFIG_CHANNEL |
| #define WMI_TPC_CHAINMASK_CONFIG_CHANNEL (0x1 << WMI_TPC_CHAINMASK_CONFIG_CHANNEL_S) |
| #define WMI_TPC_CHAINMASK_CONFIG_CHANNEL_GET(x) WMI_F_MS(x, WMI_TPC_CHAINMASK_CONFIG_CHANNEL) |
| #define WMI_TPC_CHAINMASK_CONFIG_CHANNEL_SET(x, z) WMI_F_RMW(x, (z)&0x1, WMI_TPC_CHAINMASK_CONFIG_CHANNEL) |
| |
| #define WMI_TPC_CHAINMASK_CONFIG_RATE_S 22 |
| /* |
| * The deprecated old name (WMI_TPC_CHAINMASK_CONFIG_RATE_EXIST) |
| * is temporarily maintained as an alias for the correct name |
| * (WMI_TPC_CHAINMASK_CONFIG_RATE) |
| */ |
| #define WMI_TPC_CHAINMASK_CONFIG_RATE_EXIST WMI_TPC_CHAINMASK_CONFIG_RATE |
| #define WMI_TPC_CHAINMASK_CONFIG_RATE (0x1 << WMI_TPC_CHAINMASK_CONFIG_RATE_S) |
| #define WMI_TPC_CHAINMASK_CONFIG_RATE_GET(x) WMI_F_MS(x, WMI_TPC_CHAINMASK_CONFIG_RATE) |
| #define WMI_TPC_CHAINMASK_CONFIG_RATE_SET(x, z) WMI_F_RMW(x, (z)&0x1, WMI_TPC_CHAINMASK_CONFIG_RATE) |
| |
| /** Bit map definition for basic_config_info ends */ |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** Basic condition defined as bit map above, bitmap is chosen to save memory. |
| * Bit0 ~ Bit4: tpc offset which will be adjusted if condtion matches, the unit is 0.5dB. bit4 indicates signed |
| * Bit5 ~ Bit9: ack offset which will be adjusted if condtion matches, the unit is 0.5dB. bit9 indicates signed |
| * Bit10 ~ Bit11: chainmask b'00: don't care, b'01: force to use chain0, b'10: force to use chain1, b'11: force to use chain0&chain1 |
| * Bit12 ~ Bit13: bt condition b'00: don't care, b'01: apply only when bt on, b'10: apply only when bt off, b'11: reserved |
| * Bit14 ~ Bit15: stbc condition b'00: don't care, b'01: apply only when stbc on, b'10: apply only when stbc off, b'11: reserved |
| * Bit16 : band condition b'0: 2G, b'1: 5G |
| * Bit17 : stream condition: b'0: 1 stream, b'1: 2 streams |
| * Bit18 ~ Bit20: phy mode condition: b'000: 11b 2g, b'001: 11g 2g, b'010: 11n 2g, b'011: 11n+11ac 2g, b'100: 11a, b'101: 11n 5g, b'110: 11ac 5g, b'111: 11n+11ac 5g |
| * Bit21 : channel bit, if this bit is 0, then the following channel field is ignored |
| * Bit22 : rate bit, if this bit is 0, then the following rate0&rate1 is ignored. |
| * Bit23 ~ Bit31: reserved |
| */ |
| A_UINT32 basic_config_info; |
| |
| /** channel mapping bit rule: The lower bit corresponds with smaller channel. |
| * it depends on Bit14 of basic_config_info |
| * Total 24 channels for 5G |
| * 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165 |
| * Total 14 channels for 2G |
| * 1 ~ 14 |
| */ |
| A_UINT32 channel; |
| |
| /** rate mapping bit rule: The lower bit corresponds with lower rate. |
| * it depends on Bit16 ~ Bit18 of basic_config_info, "phy mode condition" |
| * Legacy rates , 11b, 11g, 11A |
| * 11n one stream ( ht20, ht40 ) 8+8 |
| * 11n two streams ( ht20, ht40 ) 8+8 |
| * 11ac one stream ( vht20, vht40, vht80 ) 10+10+10 |
| * 11ac two streams (vht20, vht40, vht80 ) 10+10+10 |
| */ |
| A_UINT32 rate0; |
| /** For example, for 11b, when rate0 equals 0x3, it means if actual_rate in [ "1Mbps", "2Mbps"] connection, the rate condition is true. |
| * For example, for 11g/11a, when rate0 equals 0xf0,it means "54Mbps", "48Mbps", "36Mbps", "24Mb's" is selected, while "18Mbps", "12Mbps", "9Mbps", "6Mbps" is not selected |
| */ |
| |
| /** only used for "11n+11ac" combined phy_mode, (WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11N_11AC_2G , WMI_TPC_CHAINMASK_CONFIG_PHY_MODE_11N_11AC_5G) in this case, 11n rates begins on rate0, while 11ac rates begins on rate1 |
| */ |
| A_UINT32 rate1; |
| } wmi_tpc_chainmask_config; |
| |
| #define WMI_TPC_CHAINMASK_CONFIG_DISABLE 0 /** control the off for the tpc & chainmask*/ |
| #define WMI_TPC_CHAINMASK_CONFIG_ENABLE 1 /** control the on for the tpc & chainmask*/ |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 enable; |
| /** enable to set tpc & chainmask when condtions meet, 0: disabled, 1: enabled. */ |
| A_UINT32 num_tpc_chainmask_configs; |
| /** following this structure is num_tpc_chainmask_configs number of wmi_tpc_chainmask_config */ |
| } wmi_tpc_chainmask_config_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_nan_cmd_param */ |
| A_UINT32 data_len; |
| /** length in byte of data[]. */ |
| /* This structure is used to send REQ binary blobs |
| * from application/service to firmware where Host drv is pass through . |
| * Following this structure is the TLV: |
| * A_UINT8 data[]; // length in byte given by field data_len. |
| */ |
| } wmi_nan_cmd_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_nan_event_hdr */ |
| A_UINT32 data_len; |
| /** length in byte of data[]. */ |
| /* This structure is used to send REQ binary blobs |
| * from firmware to application/service where Host drv is pass through . |
| * Following this structure is the TLV: |
| * A_UINT8 data[]; // length in byte given by field data_len. |
| */ |
| } wmi_nan_event_hdr; |
| |
| /** |
| * Event to indicate NAN discovery interface created |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_nan_disc_iface_created_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /** NAN interface MAC address */ |
| wmi_mac_addr nan_interface_macaddr; |
| } wmi_nan_disc_iface_created_event_fixed_param; |
| |
| /** |
| * Event to indicate NAN discovery interface deleted |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_nan_disc_iface_deleted_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| } wmi_nan_disc_iface_deleted_event_fixed_param; |
| |
| /** |
| * Event to indicate NAN device started new cluster |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_nan_started_cluster_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /** NAN Cluster ID */ |
| A_UINT32 nan_cluster_id; |
| } wmi_nan_started_cluster_event_fixed_param; |
| |
| /** |
| * Event to indicate NAN device joined to cluster |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_nan_joined_cluster_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /** NAN Cluster ID */ |
| A_UINT32 nan_cluster_id; |
| } wmi_nan_joined_cluster_event_fixed_param; |
| |
| /** NAN DATA CMD's */ |
| |
| /** |
| * NAN Data get capabilities req |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ndi_get_cap_req_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** unique id generated in upper layer for the transaction */ |
| A_UINT32 transaction_id; |
| } wmi_ndi_get_cap_req_fixed_param; |
| |
| /** |
| * NDP configuration (Security and/or QOS) |
| */ |
| typedef struct { |
| A_UINT32 tag; /** WMI_NDP_CFG_TAG */ |
| A_UINT32 ndp_cfg_len; /** ndp_cfg length in byte */ |
| A_UINT32 ndp_cfg[1]; /** Security/QoS configuration */ |
| } wmi_ndp_cfg; |
| |
| /** |
| * NDP QOS configuration |
| */ |
| typedef struct { |
| A_UINT32 tag; /** WMI_NDP_QOS_CFG_TAG */ |
| A_UINT32 ndp_qos_cfg_len; /** ndp_qos_cfg length in byte */ |
| A_UINT32 ndp_qos_cfg[1]; /** QoS configuration */ |
| } wmi_ndp_qos_cfg; |
| |
| /** |
| * NDP application information |
| */ |
| typedef struct { |
| A_UINT32 tag; /** WMI_NDP_APP_INFO_TAG */ |
| A_UINT32 ndp_app_info_len; /** ndp_app_info length in byte */ |
| A_UINT32 ndp_app_info[1]; /** App/Service information */ |
| } wmi_ndp_app_info; |
| |
| /** |
| * NDP Response code |
| */ |
| typedef enum { |
| NDP_RSP_CODE_REQUEST_ACCEPT = 0x00, |
| NDP_RSP_CODE_REQUEST_REJECT = 0x01, |
| NDP_RSP_CODE_REQUEST_DEFER = 0x02, |
| } wmi_ndp_rsp_code; |
| |
| /** |
| * NDP Initiator requesting a data session |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ndp_initiator_req_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /** unique id generated in upper layer for the transaction */ |
| A_UINT32 transaction_id; |
| /** Unique Instance Id identifying the Responder's service */ |
| A_UINT32 service_instance_id; |
| /** Discovery MAC addr of the publisher/peer */ |
| wmi_mac_addr peer_discovery_mac_addr; |
| /** Number of bytes in TLV wmi_ndp_cfg */ |
| A_UINT32 ndp_cfg_len; |
| /** Number of bytes in TLV wmi_ndp_app_info */ |
| A_UINT32 ndp_app_info_len; |
| /** |
| * TLV (tag length value ) parameters follow the ndp_initiator_req |
| * structure. The TLV's are: |
| * wmi_ndp_cfg ndp_cfg[]; |
| * wmi_ndp_app_info ndp_app_info[]; |
| */ |
| } wmi_ndp_initiator_req_fixed_param; |
| |
| /** |
| * Initiate a data response on the responder side |
| * for data request indication from the peer |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ndp_responder_req_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /** unique id generated in upper layer for the transaction */ |
| A_UINT32 transaction_id; |
| /** |
| * Unique token Id generated on the initiator/responder |
| * side used for a NDP session between two NAN devices |
| */ |
| A_UINT32 ndp_instance_id; |
| /** Response Code defined in wmi_ndp_rsp_code */ |
| A_UINT32 rsp_code; |
| /** Number of bytes in TLV wmi_ndp_cfg */ |
| A_UINT32 ndp_cfg_len; |
| /** Number of bytes in TLV wmi_ndp_app_info */ |
| A_UINT32 ndp_app_info_len; |
| /** |
| * TLV (tag length value ) parameters follow the ndp_responder_req |
| * structure. The TLV's are: |
| * wmi_ndp_cfg ndp_cfg[]; |
| * wmi_ndp_app_info ndp_app_info[]; |
| */ |
| } wmi_ndp_responder_req_fixed_param; |
| |
| /** |
| * NDP end type |
| */ |
| typedef enum { |
| NDP_END_TYPE_UNSPECIFIED = 0x00, |
| NDP_END_TYPE_PEER_UNAVAILABLE = 0x01, |
| NDP_END_TYPE_OTA_FRAME = 0x02, |
| } wmi_ndp_end_type; |
| |
| /** |
| * NDP end reason code |
| */ |
| typedef enum { |
| NDP_END_REASON_UNSPECIFIED = 0x00, |
| NDP_END_REASON_INACTIVITY = 0x01, |
| NDP_END_REASON_PEER_DATA_END = 0x02, |
| } wmi_ndp_end_reason_code; |
| |
| /** |
| * NDP end request |
| */ |
| typedef struct { |
| /** reason_code defined in wmi_ndp_end_reason_code */ |
| A_UINT32 reason_code; |
| /** NDP instance id */ |
| A_UINT32 ndp_instance_id; |
| } wmi_ndp_end_req; |
| |
| /** |
| * NDP end request list |
| */ |
| typedef struct { |
| A_UINT32 tag;/** WMI_NDP_END_REQ_LIST_TAG */ |
| A_UINT32 num_ndp_end_reqs; /** number of wmi_ndp_end_req */ |
| wmi_ndp_end_req ndp_end_reqs[1]; |
| } wmi_ndp_end_req_list; |
| |
| /** |
| * NDP End request |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ndp_end_req_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** unique id generated in upper layer for the transaction */ |
| A_UINT32 transaction_id; |
| /** Number of ndp instances in wmi_ndp_end_req_list */ |
| A_UINT32 num_ndp_instances; |
| /** Number of bytes in TLV wmi_ndp_end_req_list */ |
| A_UINT32 ndp_end_req_len; |
| /** |
| * TLV (tag length value ) parameters follow the ndp_end_req |
| * structure. The TLV's are: |
| * wmi_ndp_end_req wmi_ndp_end_req_list[]; |
| */ |
| } wmi_ndp_end_req_fixed_param; |
| |
| /* NAN DATA RSP EVENTS */ |
| |
| /** |
| * Event to indicate NAN Data Interface capabilities cmd |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ndi_cap_rsp_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Copy of transaction_id received in wmi_ndi_get_cap_req */ |
| A_UINT32 transaction_id; |
| /** Max ndi interface support */ |
| A_UINT32 max_ndi_interfaces; |
| /** Max ndp per ndi support */ |
| A_UINT32 max_ndp_per_ndi; |
| /** Max number of peer's per ndi */ |
| A_UINT32 max_peers_per_ndi; |
| } wmi_ndi_cap_rsp_event_fixed_param; |
| |
| /** |
| * NDP command response code |
| */ |
| typedef enum { |
| NDP_CMD_RSP_STATUS_SUCCESS = 0x00, |
| NDP_CMD_RSP_STATUS_ERROR = 0x01, |
| } wmi_ndp_cmd_rsp_status; |
| |
| /** |
| * NDP command reason code |
| */ |
| typedef enum { |
| NDP_INVALID_VDEV_ID_PARAM = 0x00, |
| NDP_INVALID_SERVICE_INSTANCE_ID_PARAM = 0x01, |
| NDP_INVALID_PEER_DISC_MAC_ADDR_PARAM = 0x02, |
| NDP_INVALID_NDP_CFG_SECURITY_PARAM = 0x03, |
| NDP_INVALID_NDP_CFG_QOS_PARAM = 0x04, |
| NDP_INVALID_APP_INFO_LEN_PARAM = 0x05, |
| NDP_INVALID_NDP_INSTANCE_ID_PARAM = 0x06, |
| NDP_INVALID_RSP_CODE_PARAM = 0x07, |
| } wmi_ndp_cmd_reason_code; |
| |
| /** |
| * Event response for wmi_ndp_initiator_req |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ndp_initiator_rsp_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /** Copy of transaction_id received in wmi_ndp_initiator_req */ |
| A_UINT32 transaction_id; |
| /** Response status defined in wmi_ndp_cmd_rsp_status*/ |
| A_UINT32 rsp_status; |
| /** Reason code defined in wmi_ndp_cmd_reason_code */ |
| A_UINT32 reason_code; |
| } wmi_ndp_initiator_rsp_event_fixed_param; |
| |
| /** |
| * Event response for wmi_ndp_responder_req cmd |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ndp_responder_rsp_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /** Copy of transaction_id received in wmi_ndp_responder_req */ |
| A_UINT32 transaction_id; |
| /** Response status defined in wmi_ndp_cmd_rsp_status*/ |
| A_UINT32 rsp_status; |
| /** Reason code defined in wmi_ndp_cmd_reason_code */ |
| A_UINT32 reason_code; |
| } wmi_ndp_responder_rsp_event_fixed_param; |
| |
| /** |
| * NDP end response per ndi |
| */ |
| typedef struct { |
| /** Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /** Peer MAC addr */ |
| wmi_mac_addr peer_mac_addr; |
| /** Number of active ndps on this ndi */ |
| A_UINT32 num_active_ndps_on_ndi; |
| } wmi_ndp_end_rsp_per_ndi; |
| |
| /** |
| * NDP end response per ndi list |
| */ |
| typedef struct { |
| /** WMI_NDP_END_RSP_PER_NDI_LIST_TAG */ |
| A_UINT32 tag; |
| /** Number of ndp_end_rsp_per_ndi */ |
| A_UINT32 num_ndp_end_rsp_per_ndis; |
| wmi_ndp_end_rsp_per_ndi ndp_end_rsp_per_ndis[1]; |
| } wmi_ndp_end_rsp_per_ndi_list; |
| |
| /** |
| * Event response for wmi_ndp_end_req cmd |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ndp_end_rsp_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Copy of transaction_id received in wmi_ndp_end_req */ |
| A_UINT32 transaction_id; |
| /** Response status defined in wmi_ndp_cmd_rsp_status*/ |
| A_UINT32 rsp_status; |
| /** Reason code defined in wmi_ndp_cmd_reason_code */ |
| A_UINT32 reason_code; |
| /** Number of bytes in TLV wmi_ndp_end_rsp_per_ndi */ |
| A_UINT32 data_end_req_rsp_len; |
| /** |
| * TLV (tag length value ) parameters follow the ndp_end_rsp |
| * structure. The TLV's are: |
| * wmi_ndp_end_rsp_per_ndi ndp_end_rsp_per_ndis[]; |
| */ |
| } wmi_ndp_end_rsp_event_fixed_param; |
| |
| /** NAN DATA EVENTS */ |
| |
| /** |
| * NDP self role |
| */ |
| typedef enum { |
| WMI_NDP_INITIATOR_ROLE, |
| WMI_NDP_RESPONDER_ROLE, |
| } wmi_ndp_self_role; |
| |
| /** |
| * NDP accept policy |
| */ |
| typedef enum { |
| WMI_NDP_ACCEPT_POLICY_NONE, |
| WMI_NDP_ACCEPT_POLICY_ALL, |
| } wmi_ndp_accept_policy; |
| |
| /** |
| * Event indication received on the responder side when a NDP Initiator request/ |
| * NDP session is initiated on the Initiator side |
| * (self role will be NDP_RESPONDER_ROLE) |
| * |
| * Event indication received on the initiator side when a |
| * NDP responder request on the Initiator side |
| * (self role will be NDP_INITIATOR_ROLE) |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ndp_indication_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /** Self NDP Role defined in wmi_ndp_self_role */ |
| A_UINT32 self_ndp_role; |
| /** Accept policy defined in wmi_ndp_accept_policy */ |
| A_UINT32 accept_policy; |
| /** Unique Instance Id corresponding to a service/session. */ |
| A_UINT32 service_instance_id; |
| /** Discovery MAC addr of the peer/initiator */ |
| wmi_mac_addr peer_disc_mac_addr; |
| /** |
| * Unique token Id generated on the initiator/responder |
| * side used for a NDP session between two NAN devices |
| */ |
| A_UINT32 ndp_instance_id; |
| /** Number of bytes in TLV wmi_ndp_cfg */ |
| A_UINT32 ndp_cfg_len; |
| /** Number of bytes in TLV wmi_ndp_app_info */ |
| A_UINT32 ndp_app_info_len; |
| /** |
| * TLV (tag length value ) parameters follow the ndp_indication |
| * structure. The TLV's are: |
| * wmi_ndp_cfg ndp_cfg[]; |
| * wmi_ndp_app_info ndp_app_info[]; |
| */ |
| } wmi_ndp_indication_event_fixed_param; |
| |
| /** |
| * Event indication of data confirm is received on both |
| * initiator and responder side confirming a NDP session |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ndp_confirm_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /** |
| * Unique token Id generated on the initiator/responder |
| * side used for a NDP session between two NAN devices |
| */ |
| A_UINT32 ndp_instance_id; |
| /* |
| * NDI mac address of the peer |
| * (required to derive target ipv6 address) |
| */ |
| wmi_mac_addr peer_ndi_mac_addr; |
| /** Response Code defined in wmi_ndp_rsp_code */ |
| A_UINT32 rsp_code; |
| /** Number of bytes in TLV wmi_ndp_cfg */ |
| A_UINT32 ndp_cfg_len; |
| /** Number of bytes in TLV wmi_ndp_app_info */ |
| A_UINT32 ndp_app_info_len; |
| /** |
| * TLV (tag length value ) parameters follow the ndp_confirm |
| * structure. The TLV's are: |
| * wmi_ndp_cfg ndp_cfg[]; |
| * wmi_ndp_app_info ndp_app_info[]; |
| */ |
| } wmi_ndp_confirm_event_fixed_param; |
| |
| /** |
| * NDP end indication |
| */ |
| typedef struct { |
| /** type defined in wmi_ndp_end_type */ |
| A_UINT32 type; |
| /** reason_code defined in wmi_ndp_end_reason_code */ |
| A_UINT32 reason_code; |
| /** NDP instance id */ |
| A_UINT32 ndp_instance_id; |
| } wmi_ndp_end_indication; |
| |
| /** |
| * NDP end indication list |
| */ |
| typedef struct { |
| /** WMI_NDP_END_INDICATION_LIST_TAG */ |
| A_UINT32 tag; |
| /** Number of ndp_end_rsp_per_ndi */ |
| A_UINT32 num_ndp_end_indications; |
| wmi_ndp_end_indication ndp_end_indications[1]; |
| } wmi_ndp_end_indication_list; |
| |
| /** |
| * Event indication received on the initiator/responder side |
| * terminating a NDP session |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ndp_end_indication_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /** Number of ndp instances in wmi_ndp_end_indication */ |
| A_UINT32 num_ndp_instances; |
| /** Number of bytes in TLV wmi_ndp_end_indication */ |
| A_UINT32 data_end_event_len; |
| /** |
| * TLV (tag length value ) parameters follow the ndp_end_indication |
| * structure. The TLV's are: |
| * wmi_ndp_end_indication ndp_end_indications[]; |
| */ |
| } wmi_ndp_end_indication_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 num_data; |
| /* followed by WMITLV_TAG_ARRAY_BYTE */ |
| } wmi_diag_data_container_event_fixed_param; |
| |
| enum { |
| WMI_PDEV_PARAM_TXPOWER_REASON_NONE = 0, |
| WMI_PDEV_PARAM_TXPOWER_REASON_SAR, |
| WMI_PDEV_PARAM_TXPOWER_REASON_MAX |
| }; |
| |
| #define PDEV_PARAM_TXPOWER_VALUE_MASK 0x000000FF |
| #define PDEV_PARAM_TXPOWER_VALUE_SHIFT 0 |
| |
| #define PDEV_PARAM_TXPOWER_REASON_MASK 0x0000FF00 |
| #define PDEV_PARAM_TXPOWER_REASON_SHIFT 8 |
| |
| #define SET_PDEV_PARAM_TXPOWER_VALUE(txpower_param, value) \ |
| ((txpower_param) &= ~PDEV_PARAM_TXPOWER_VALUE_MASK, (txpower_param) |= ((value) << PDEV_PARAM_TXPOWER_VALUE_SHIFT)) |
| |
| #define SET_PDEV_PARAM_TXPOWER_REASON(txpower_param, value) \ |
| ((txpower_param) &= ~PDEV_PARAM_TXPOWER_REASON_MASK, (txpower_param) |= ((value) << PDEV_PARAM_TXPOWER_REASON_SHIFT)) |
| |
| #define GET_PDEV_PARAM_TXPOWER_VALUE(txpower_param) \ |
| (((txpower_param) & PDEV_PARAM_TXPOWER_VALUE_MASK) >> PDEV_PARAM_TXPOWER_VALUE_SHIFT) |
| |
| #define GET_PDEV_PARAM_TXPOWER_REASON(txpower_param) \ |
| (((txpower_param) & PDEV_PARAM_TXPOWER_REASON_MASK) >> PDEV_PARAM_TXPOWER_REASON_SHIFT) |
| |
| /** |
| * This command is sent from WLAN host driver to firmware to |
| * notify the current modem power state. Host would receive a |
| * message from modem when modem is powered on. Host driver |
| * would then send this command to firmware. Firmware would then |
| * power on WCI-2 (UART) interface for LTE/MWS Coex. |
| * |
| * This command is only applicable for APQ platform which has |
| * modem on the platform. If firmware doesn't support MWS Coex, |
| * this command can be dropped by firmware. |
| * |
| * This is a requirement from modem team that WCN can't toggle |
| * UART before modem is powered on. |
| */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_modem_power_state_cmd_param */ |
| A_UINT32 tlv_header; |
| |
| /** Modem power state parameter */ |
| A_UINT32 modem_power_state; |
| } wmi_modem_power_state_cmd_param; |
| |
| enum { |
| WMI_MODEM_STATE_OFF = 0, |
| WMI_MODEM_STATE_ON |
| }; |
| |
| #define WMI_ROAM_AUTH_STATUS_CONNECTED 0x1 /** connected, but not authenticated */ |
| #define WMI_ROAM_AUTH_STATUS_AUTHENTICATED 0x2 /** connected and authenticated */ |
| |
| /** WMI_ROAM_SYNCH_EVENT: roam synch event triggering the host propagation logic |
| generated whenever firmware roamed to new AP silently and |
| (a) If the host is awake, FW sends the event to the host immediately . |
| (b) If host is in sleep then either |
| (1) FW waits until host sends WMI_PDEV_RESUME_CMDID or WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID |
| command to FW (part of host wake up sequence from low power mode) before sending the event host. |
| (2) data/mgmt frame is received from roamed AP, which needs to return to host |
| */ |
| |
| typedef struct { |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_key_material */ |
| A_UINT32 tlv_header; |
| |
| A_UINT8 kck[GTK_OFFLOAD_KCK_BYTES]; /* EAPOL-Key Key Confirmation Key (KCK) */ |
| A_UINT8 kek[GTK_OFFLOAD_KEK_BYTES]; /* EAPOL-Key Key Encryption Key (KEK) */ |
| A_UINT8 replay_counter[GTK_REPLAY_COUNTER_BYTES]; |
| } wmi_key_material; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_synch_event_fixed_param */ |
| /** Unique id identifying the VDEV on which roaming is done by firmware */ |
| A_UINT32 vdev_id; |
| /** auth_status: connected or authorized */ |
| A_UINT32 auth_status; |
| /* |
| * roam_reason: |
| * bits 0-3 for roam reason see WMI_ROAM_REASON_XXX |
| * bits 4-5 for subnet status see WMI_ROAM_SUBNET_CHANGE_STATUS_XXX. |
| */ |
| A_UINT32 roam_reason; |
| /** associated AP's rssi calculated by FW when reason code is WMI_ROAM_REASON_LOW_RSSI. not valid if roam_reason is BMISS */ |
| A_UINT32 rssi; |
| /** MAC address of roamed AP */ |
| wmi_mac_addr bssid; /* BSSID */ |
| /** whether the frame is beacon or probe rsp */ |
| A_UINT32 is_beacon; |
| /** the length of beacon/probe rsp */ |
| A_UINT32 bcn_probe_rsp_len; |
| /** the length of reassoc rsp */ |
| A_UINT32 reassoc_rsp_len; |
| /** the length of reassoc req */ |
| A_UINT32 reassoc_req_len; |
| /** |
| * TLV (tag length value ) parameters follows roam_synch_event |
| * The TLV's are: |
| * A_UINT8 bcn_probe_rsp_frame[]; length identified by bcn_probe_rsp_len |
| * A_UINT8 reassoc_rsp_frame[]; length identified by reassoc_rsp_len |
| * wmi_channel chan; |
| * wmi_key_material key; |
| * A_UINT32 status; subnet changed status not being used |
| * currently. will pass the information using roam_status. |
| * A_UINT8 reassoc_req_frame[]; length identified by reassoc_req_len |
| **/ |
| } wmi_roam_synch_event_fixed_param; |
| |
| #define WMI_PEER_ESTIMATED_LINKSPEED_INVALID 0xFFFFFFFF |
| |
| typedef struct { |
| /* TLV tag and len; tag equals WMITLV_TAG_STRUC_ wmi_peer_get_estimated_linkspeed_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** MAC address of the peer for which the estimated link speed is required. */ |
| wmi_mac_addr peer_macaddr; |
| /* Set to 1 only if vdev_id field is valid */ |
| A_UINT32 valid_vdev_id; |
| /* VDEV to which the peer belongs to */ |
| A_UINT32 vdev_id; |
| } wmi_peer_get_estimated_linkspeed_cmd_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals WMITLV_TAG_STRUC_ wmi_peer_estimated_linkspeed_event_fixed_param */ |
| A_UINT32 tlv_header; |
| /** MAC address of the peer for which the estimated link speed is required. |
| */ |
| wmi_mac_addr peer_macaddr; |
| /* Estimated link speed in kbps. |
| * When est_linkspeed_kbps is not valid, the value is set to WMI_PEER_ESTIMATED_LINKSPEED_INVALID. |
| */ |
| A_UINT32 est_linkspeed_kbps; |
| /* Set to 1 only if vdev_id field is valid */ |
| A_UINT32 valid_vdev_id; |
| /* VDEV to which the peer belongs to */ |
| A_UINT32 vdev_id; |
| } wmi_peer_estimated_linkspeed_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals */ |
| /* vdev ID */ |
| A_UINT32 vdev_id; |
| A_UINT32 data_len; |
| /** length in byte of data[]. */ |
| /* This structure is used to send REQ binary blobs |
| * from application/service to firmware where Host drv is pass through . |
| * Following this structure is the TLV: |
| * A_UINT8 data[]; // length in byte given by field data_len. |
| */ |
| } wmi_req_stats_ext_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_stats1_event_fix_param */ |
| A_UINT32 vdev_id; |
| /** vdev ID */ |
| A_UINT32 data_len; |
| /** length in byte of data[]. */ |
| /* This structure is used to send REQ binary blobs |
| * from firmware to application/service where Host drv is pass through . |
| * Following this structure is the TLV: |
| * A_UINT8 data[]; // length in byte given by field data_len. |
| */ |
| } wmi_stats_ext_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_delete_resp_event_fixed_param */ |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| } wmi_peer_delete_resp_event_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals WMITLV_TAG_STRUC_ wmi_peer_state_event_fixed_param */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; /* vdev ID */ |
| /* MAC address of the peer for which the estimated link speed is required. */ |
| wmi_mac_addr peer_macaddr; |
| A_UINT32 state; /* peer state */ |
| } wmi_peer_state_event_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_peer_assoc_conf_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /* unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /* peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| } wmi_peer_assoc_conf_event_fixed_param; |
| |
| enum { |
| WMI_2G4_HT40_OBSS_SCAN_PASSIVE = 0, |
| /** scan_type: passive */ |
| WMI_2G4_HT40_OBSS_SCAN_ACTIVE, |
| /** scan_type: active */ |
| }; |
| |
| typedef struct { |
| /** |
| * TLV tag and len; |
| * tag equals WMITLV_TAG_STRUC_wmi_obss_scan_enalbe_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| /** |
| * active or passive. if active all the channels are actively scanned. |
| * if passive then all the channels are passively scanned |
| */ |
| A_UINT32 scan_type; |
| /** |
| * FW can perform multiple scans with in a OBSS scan interval. |
| * For each scan, |
| * if the scan is passive then obss_scan_passive_dwell is minimum dwell to be used for each channel , |
| * if the scan is active then obss_scan_active_dwell is minimum dwell to be used for each channel . |
| * The unit for these 2 parameters is TUs. |
| */ |
| A_UINT32 obss_scan_passive_dwell; |
| A_UINT32 obss_scan_active_dwell; |
| /** |
| * OBSS scan interval . FW needs to perform one or more OBSS scans within this interval and fulfill the |
| * both min and total per channel dwell time requirement |
| */ |
| A_UINT32 bss_channel_width_trigger_scan_interval; |
| /** |
| * FW can perform multiple scans with in a OBSS scan interval. |
| * For each scan, |
| * the total per channel dwell time across all scans with in OBSS scan interval should be |
| * atleast obss_scan_passive_total_per channel for passive scas and obss_scan_active_total_per channel |
| * for active scans and , |
| * The unit for these 2 parameters is TUs. |
| */ |
| A_UINT32 obss_scan_passive_total_per_channel; |
| A_UINT32 obss_scan_active_total_per_channel; |
| A_UINT32 bss_width_channel_transition_delay_factor; |
| /** parameter to check exemption from scan */ |
| A_UINT32 obss_scan_activity_threshold; |
| /** parameter to check exemption from scan */ |
| /** following two parameters used by FW to fill IEs when sending 20/40 coexistence action frame to AP */ |
| A_UINT32 forty_mhz_intolerant; |
| /** STA 40M bandwidth intolerant capability */ |
| A_UINT32 current_operating_class; |
| /** STA current operating class */ |
| /** length of 2.4GHz channel list to scan at, channel list in tlv->channels[] */ |
| A_UINT32 channel_len; |
| /** length of optional ie data to append to probe reqest when active scan, ie data in tlv->ie_field[] */ |
| A_UINT32 ie_len; |
| } wmi_obss_scan_enable_cmd_fixed_param; |
| |
| typedef struct { |
| /** |
| * TLV tag and len; |
| * tag equals WMITLV_TAG_STRUC_wmi_obss_scan_disalbe_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| } wmi_obss_scan_disable_cmd_fixed_param; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_offload_prb_rsp_tx_status_event_fixed_param */ |
| A_UINT32 tlv_header; |
| /** unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /** prb rsp tx status, values defined in enum WMI_FRAME_TX_STATUS */ |
| A_UINT32 tx_status; |
| } wmi_offload_prb_rsp_tx_status_event_fixed_param; |
| |
| typedef enum { |
| WMI_FRAME_TX_OK, /* frame tx ok */ |
| WMI_FRAME_TX_XRETRY, /* excessivley retried */ |
| WMI_FRAME_TX_DROP, /* frame dropped by FW due to resources */ |
| WMI_FRAME_TX_FILTERED, /* frame filtered by hardware */ |
| } WMI_FRAME_TX_STATUS; |
| |
| /** |
| * This command is sent from WLAN host driver to firmware to |
| * request firmware to send the latest channel avoidance range |
| * to host. |
| * |
| * This command is only applicable for APQ platform which has |
| * modem on the platform. If firmware doesn't support MWS Coex, |
| * this command can be dropped by firmware. |
| * |
| * Host would send this command to firmware to request a channel |
| * avoidance information update. |
| */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_chan_avoid_update_cmd_param */ |
| A_UINT32 tlv_header; |
| } wmi_chan_avoid_update_cmd_param; |
| |
| /* ExtScan operation mode */ |
| typedef enum { |
| WMI_EXTSCAN_MODE_NONE = 0x0000, |
| WMI_EXTSCAN_MODE_START = 0x0001, /* ExtScan/TableMonitoring operation started */ |
| WMI_EXTSCAN_MODE_STOP = 0x0002, /* ExtScan/TableMonitoring operation stopped */ |
| WMI_EXTSCAN_MODE_IGNORED = 0x0003, /* ExtScan command ignored due to error */ |
| } wmi_extscan_operation_mode; |
| |
| /* Channel Mask */ |
| typedef enum { |
| WMI_CHANNEL_BAND_UNSPECIFIED = 0x0000, |
| WMI_CHANNEL_BAND_24 = 0x0001, /* 2.4 channel */ |
| WMI_CHANNEL_BAND_5_NON_DFS = 0x0002, /* 5G Channels (No DFS channels) */ |
| WMI_CHANNEL_BAND_DFS = 0x0004, /* DFS channels */ |
| } wmi_channel_band_mask; |
| |
| typedef enum { |
| WMI_EXTSCAN_CYCLE_STARTED_EVENT = 0x0001, |
| WMI_EXTSCAN_CYCLE_COMPLETED_EVENT = 0x0002, |
| WMI_EXTSCAN_BUCKET_STARTED_EVENT = 0x0004, |
| WMI_EXTSCAN_BUCKET_COMPLETED_EVENT = 0x0008, |
| WMI_EXTSCAN_BUCKET_FAILED_EVENT = 0x0010, |
| WMI_EXTSCAN_BUCKET_OVERRUN_EVENT = 0x0020, |
| WMI_EXTSCAN_THRESHOLD_NUM_SCANS = 0x0040, |
| WMI_EXTSCAN_THRESHOLD_PERCENT = 0x0080, |
| |
| WMI_EXTSCAN_EVENT_MAX = 0x8000 |
| } wmi_extscan_event_type; |
| |
| #define WMI_EXTSCAN_CYCLE_EVENTS_MASK (WMI_EXTSCAN_CYCLE_STARTED_EVENT | \ |
| WMI_EXTSCAN_CYCLE_COMPLETED_EVENT) |
| |
| #define WMI_EXTSCAN_BUCKET_EVENTS_MASK (WMI_EXTSCAN_BUCKET_STARTED_EVENT | \ |
| WMI_EXTSCAN_BUCKET_COMPLETED_EVENT | \ |
| WMI_EXTSCAN_BUCKET_FAILED_EVENT | \ |
| WMI_EXTSCAN_BUCKET_OVERRUN_EVENT) |
| |
| typedef enum { |
| WMI_EXTSCAN_NO_FORWARDING = 0x0000, |
| WMI_EXTSCAN_FORWARD_FRAME_TO_HOST = 0x0001 |
| } wmi_extscan_forwarding_flags; |
| |
| typedef enum { |
| /* Use Motion Sensor Detection */ |
| WMI_EXTSCAN_USE_MSD = 0x0001, |
| /* Extscan LPASS extended batching feature is supported and enabled */ |
| WMI_EXTSCAN_EXTENDED_BATCHING_EN = 0x0002, |
| } wmi_extscan_configuration_flags; |
| typedef enum { |
| /* |
| * Cache the results of bucket whose |
| * configuration flags has this bit set |
| */ |
| WMI_EXTSCAN_BUCKET_CACHE_RESULTS = 0x0001, |
| /* Report ext scan results to context hub or not.*/ |
| WMI_EXTSCAN_REPORT_EVENT_CONTEXT_HUB = 0x0002, |
| } wmi_extscan_bucket_configuration_flags; |
| |
| typedef enum { |
| WMI_EXTSCAN_STATUS_OK = 0, |
| WMI_EXTSCAN_STATUS_ERROR = 0x80000000, |
| WMI_EXTSCAN_STATUS_INVALID_PARAMETERS, |
| WMI_EXTSCAN_STATUS_INTERNAL_ERROR |
| } wmi_extscan_start_stop_status; |
| |
| typedef struct { |
| /** Request ID - to identify command. Cannot be 0 */ |
| A_UINT32 request_id; |
| /** Requestor ID - client requesting ExtScan */ |
| A_UINT32 requestor_id; |
| /** VDEV id(interface) that is requesting scan */ |
| A_UINT32 vdev_id; |
| } wmi_extscan_command_id; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */ |
| /** channel number */ |
| A_UINT32 channel; |
| |
| /** dwell time in msec - use defaults if 0 */ |
| A_UINT32 min_dwell_time; |
| A_UINT32 max_dwell_time; |
| /** passive/active channel and other flags */ |
| A_UINT32 control_flags; /* 0 => active, 1 => passive scan; ignored for DFS */ |
| } wmi_extscan_bucket_channel; |
| |
| /* Scan Bucket specification */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */ |
| /** Bucket ID - 0-based */ |
| A_UINT32 bucket_id; |
| /** ExtScan events subscription - events to be reported to client (see wmi_extscan_event_type) */ |
| A_UINT32 notify_extscan_events; |
| /** Options to forward scan results - see wmi_extscan_forwarding_flags */ |
| A_UINT32 forwarding_flags; |
| /* |
| * ExtScan configuration flags - |
| * wmi_extscan__bucket_configuration_flags |
| */ |
| A_UINT32 configuration_flags; |
| /** DEPRECATED member:multiplier to be applied to the periodic scan's base period */ |
| A_UINT32 base_period_multiplier; |
| /** dwell time in msec on active channels - use defaults if 0 */ |
| A_UINT32 min_dwell_time_active; |
| A_UINT32 max_dwell_time_active; |
| /** dwell time in msec on passive channels - use defaults if 0 */ |
| A_UINT32 min_dwell_time_passive; |
| A_UINT32 max_dwell_time_passive; |
| /** see wmi_channel_band_mask; when equal to WMI_CHANNEL_UNSPECIFIED, use channel list */ |
| A_UINT32 channel_band; |
| /** number of channels (if channel_band is WMI_CHANNEL_UNSPECIFIED) */ |
| A_UINT32 num_channels; |
| /** scan period upon start or restart of the bucket - periodicity of the bucket to begin with */ |
| A_UINT32 min_period; |
| /** period above which exponent is not applied anymore */ |
| A_UINT32 max_period; |
| /** |
| * back off value to be applied to bucket's periodicity after exp_max_step_count scan cycles |
| * new_bucket_period = last_bucket_period + last_exponent_period exp_backoff |
| */ |
| A_UINT32 exp_backoff; |
| /** number of scans performed at a given periodicity after which exponential back off value is |
| * applied to current periodicity to obtain a newer one |
| */ |
| A_UINT32 exp_max_step_count; |
| /** Followed by the variable length TLV chan_list: |
| * wmi_extscan_bucket_channel chan_list[] */ |
| } wmi_extscan_bucket; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_start_cmd_fixed_param */ |
| /** Request ID - to identify command. Cannot be 0 */ |
| A_UINT32 request_id; |
| /** Requestor ID - client requesting ExtScan */ |
| A_UINT32 requestor_id; |
| /** VDEV id(interface) that is requesting scan */ |
| A_UINT32 vdev_id; |
| /** table ID - to allow support for multiple simultaneous requests */ |
| A_UINT32 table_id; |
| /** Base period (milliseconds) used by scan buckets to define periodicity of the scans */ |
| A_UINT32 base_period; |
| /** Maximum number of iterations to run - one iteration is the scanning of the least frequent bucket */ |
| A_UINT32 max_iterations; |
| /** Options to forward scan results - see wmi_extscan_forwarding_flags */ |
| A_UINT32 forwarding_flags; |
| /** ExtScan configuration flags - wmi_extscan_configuration_flags */ |
| A_UINT32 configuration_flags; |
| /** ExtScan events subscription - bitmask indicating which events should be send to client (see wmi_extscan_event_type) */ |
| A_UINT32 notify_extscan_events; |
| /** Scan Priority, input to scan scheduler */ |
| A_UINT32 scan_priority; |
| /** Maximum number of BSSIDs to cache on each scan cycle */ |
| A_UINT32 max_bssids_per_scan_cycle; |
| /** Minimum RSSI value to report */ |
| A_UINT32 min_rssi; |
| /** Maximum table usage in percentage */ |
| A_UINT32 max_table_usage; |
| /** default dwell time in msec on active channels */ |
| A_UINT32 min_dwell_time_active; |
| A_UINT32 max_dwell_time_active; |
| /** default dwell time in msec on passive channels */ |
| A_UINT32 min_dwell_time_passive; |
| A_UINT32 max_dwell_time_passive; |
| /** min time in msec on the BSS channel,only valid if atleast one VDEV is active*/ |
| A_UINT32 min_rest_time; |
| /** max rest time in msec on the BSS channel,only valid if at least one VDEV is active*/ |
| /** the scanner will rest on the bss channel at least min_rest_time. after min_rest_time the scanner |
| * will start checking for tx/rx activity on all VDEVs. if there is no activity the scanner will |
| * switch to off channel. if there is activity the scanner will let the radio on the bss channel |
| * until max_rest_time expires.at max_rest_time scanner will switch to off channel |
| * irrespective of activity. activity is determined by the idle_time parameter. |
| */ |
| A_UINT32 max_rest_time; |
| /** time before sending next set of probe requests. |
| * The scanner keeps repeating probe requests transmission with period specified by repeat_probe_time. |
| * The number of probe requests specified depends on the ssid_list and bssid_list |
| */ |
| /** Max number of probes to be sent */ |
| A_UINT32 n_probes; |
| /** time in msec between 2 sets of probe requests. */ |
| A_UINT32 repeat_probe_time; |
| /** time in msec between 2 consequetive probe requests with in a set. */ |
| A_UINT32 probe_spacing_time; |
| /** data inactivity time in msec on bss channel that will be used by scanner for measuring the inactivity */ |
| A_UINT32 idle_time; |
| /** maximum time in msec allowed for scan */ |
| A_UINT32 max_scan_time; |
| /** delay in msec before sending first probe request after switching to a channel */ |
| A_UINT32 probe_delay; |
| /** Scan control flags */ |
| A_UINT32 scan_ctrl_flags; |
| /** Burst duration time in msec*/ |
| A_UINT32 burst_duration; |
| |
| /** number of bssids in the TLV bssid_list[] */ |
| A_UINT32 num_bssid; |
| /** number of ssid in the TLV ssid_list[] */ |
| A_UINT32 num_ssids; |
| /** number of bytes in TLV ie_data[] */ |
| A_UINT32 ie_len; |
| /** number of buckets in the TLV bucket_list[] */ |
| A_UINT32 num_buckets; |
| /** in number of scans, send notifications to host after these many scans */ |
| A_UINT32 report_threshold_num_scans; |
| |
| /** number of channels in channel_list[] determined by the |
| sum of wmi_extscan_bucket.num_channels in array */ |
| |
| /** |
| * TLV (tag length value ) parameters follow the extscan_cmd |
| * structure. The TLV's are: |
| * wmi_ssid ssid_list[]; |
| * wmi_mac_addr bssid_list[]; |
| * A_UINT8 ie_data[]; |
| * wmi_extscan_bucket bucket_list[]; |
| * wmi_extscan_bucket_channel channel_list[]; |
| */ |
| } wmi_extscan_start_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_stop_cmd_fixed_param */ |
| /** Request ID - to match running command. 0 matches any request */ |
| A_UINT32 request_id; |
| /** Requestor ID - client requesting stop */ |
| A_UINT32 requestor_id; |
| /** VDEV id(interface) that is requesting scan */ |
| A_UINT32 vdev_id; |
| /** table ID - to allow support for multiple simultaneous requests */ |
| A_UINT32 table_id; |
| } wmi_extscan_stop_cmd_fixed_param; |
| |
| enum wmi_extscan_get_cached_results_flags { |
| WMI_EXTSCAN_GET_CACHED_RESULTS_FLAG_NONE = 0x0000, |
| WMI_EXTSCAN_GET_CACHED_RESULTS_FLAG_FLUSH_TABLE = 0x0001 |
| }; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_get_cached_results_cmd_fixed_param */ |
| /** request ID - used to correlate command with events */ |
| A_UINT32 request_id; |
| /** Requestor ID - client that requested results */ |
| A_UINT32 requestor_id; |
| /** VDEV id(interface) that is requesting scan */ |
| A_UINT32 vdev_id; |
| /** table ID - to allow support for multiple simultaneous requests */ |
| A_UINT32 table_id; |
| /** maximum number of results to be returned */ |
| A_UINT32 max_results; |
| /** flush BSSID list - wmi_extscan_get_cached_results_flags */ |
| A_UINT32 control_flags; /* enum wmi_extscan_get_cached_results_flags */ |
| } wmi_extscan_get_cached_results_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_get_wlan_change_results_cmd_fixed_param */ |
| /** request ID - used to correlate command with events */ |
| A_UINT32 request_id; |
| /** Requestor ID - client that requested results */ |
| A_UINT32 requestor_id; |
| /** VDEV id(interface) that is requesting scan */ |
| A_UINT32 vdev_id; |
| /** table ID - to allow support for multiple simultaneous requests */ |
| A_UINT32 table_id; |
| } wmi_extscan_get_wlan_change_results_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */ |
| /**bssid */ |
| wmi_mac_addr bssid; |
| /**channel number */ |
| A_UINT32 channel; |
| /**upper RSSI limit */ |
| A_UINT32 upper_rssi_limit; |
| /**lower RSSI limit */ |
| A_UINT32 lower_rssi_limit; |
| } wmi_extscan_wlan_change_bssid_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_configure_wlan_change_monitor_cmd_fixed_param */ |
| /** Request ID - to identify command. Cannot be 0 */ |
| A_UINT32 request_id; |
| /** Requestor ID - client requesting wlan change monitoring */ |
| A_UINT32 requestor_id; |
| /** VDEV id(interface) that is requesting scan */ |
| A_UINT32 vdev_id; |
| /** table ID - to allow support for multiple simultaneous tables */ |
| A_UINT32 table_id; |
| /** operation mode: start/stop */ |
| A_UINT32 mode; /* wmi_extscan_operation_mode */ |
| /** number of rssi samples to store */ |
| A_UINT32 max_rssi_samples; |
| /** number of samples to use to calculate RSSI average */ |
| A_UINT32 rssi_averaging_samples; |
| /** number of scans to confirm loss of contact with RSSI */ |
| A_UINT32 lost_ap_scan_count; |
| /** number of out-of-range BSSIDs necessary to send event */ |
| A_UINT32 max_out_of_range_count; |
| /** total number of bssid signal descriptors (in all pages) */ |
| A_UINT32 total_entries; |
| /** index of the first bssid entry found in the TLV wlan_change_descriptor_list*/ |
| A_UINT32 first_entry_index; |
| /** number of bssid signal descriptors in this page */ |
| A_UINT32 num_entries_in_page; |
| /* Following this structure is the TLV: |
| * wmi_extscan_wlan_change_bssid_param wlan_change_descriptor_list[]; // number of elements given by field num_page_entries. |
| */ |
| } wmi_extscan_configure_wlan_change_monitor_cmd_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */ |
| A_UINT32 tlv_header; |
| /**ssid */ |
| wmi_ssid ssid; |
| /**band */ |
| A_UINT32 band; |
| /**RSSI threshold for reporting */ |
| A_UINT32 min_rssi; |
| A_UINT32 max_rssi; |
| } wmi_extscan_hotlist_ssid_entry; |
| |
| typedef struct { |
| /** |
| * TLV tag and len; tag equals |
| * MITLV_TAG_STRUC_wmi_extscan_configure_hotlist_ssid_monitor_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Request ID - to identify command. Cannot be 0 */ |
| A_UINT32 request_id; |
| /** Requestor ID - client requesting hotlist ssid monitoring */ |
| A_UINT32 requestor_id; |
| /** VDEV id(interface) that is requesting scan */ |
| A_UINT32 vdev_id; |
| /** table ID - to allow support for multiple simultaneous tables */ |
| A_UINT32 table_id; |
| /** operation mode: start/stop */ |
| A_UINT32 mode; /* wmi_extscan_operation_mode */ |
| /**total number of ssids (in all pages) */ |
| A_UINT32 total_entries; |
| /**index of the first ssid entry found in the TLV extscan_hotlist_ssid_entry*/ |
| A_UINT32 first_entry_index; |
| /**number of ssids in this page */ |
| A_UINT32 num_entries_in_page; |
| /** number of consecutive scans to confirm loss of an ssid **/ |
| A_UINT32 lost_ap_scan_count; |
| /* Following this structure is the TLV: |
| * wmi_extscan_hotlist_ssid_entry hotlist_ssid[]; |
| * number of element given by field num_page_entries. |
| */ |
| } wmi_extscan_configure_hotlist_ssid_monitor_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */ |
| /**bssid */ |
| wmi_mac_addr bssid; |
| /**RSSI min threshold for reporting */ |
| A_UINT32 min_rssi; |
| /**Deprecated entry channel number */ |
| A_UINT32 channel; |
| /** RSSI max threshold for reporting */ |
| A_UINT32 max_rssi; |
| } wmi_extscan_hotlist_entry; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_configure_hotlist_monitor_cmd_fixed_param */ |
| /** Request ID - to identify command. Cannot be 0 */ |
| A_UINT32 request_id; |
| /** Requestor ID - client requesting hotlist monitoring */ |
| A_UINT32 requestor_id; |
| /** VDEV id(interface) that is requesting scan */ |
| A_UINT32 vdev_id; |
| /** table ID - to allow support for multiple simultaneous tables */ |
| A_UINT32 table_id; |
| /** operation mode: start/stop */ |
| A_UINT32 mode; /* wmi_extscan_operation_mode */ |
| /**total number of bssids (in all pages) */ |
| A_UINT32 total_entries; |
| /**index of the first bssid entry found in the TLV wmi_extscan_hotlist_entry*/ |
| A_UINT32 first_entry_index; |
| /**number of bssids in this page */ |
| A_UINT32 num_entries_in_page; |
| /** number of consecutive scans to confirm loss of contact with AP */ |
| A_UINT32 lost_ap_scan_count; |
| /* Following this structure is the TLV: |
| * wmi_extscan_hotlist_entry hotlist[]; // number of elements given by field num_page_entries. |
| */ |
| } wmi_extscan_configure_hotlist_monitor_cmd_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| *WMITLV_TAG_STRUC_wmi_extscan_hotlist_match_event_fixed_param */ |
| A_UINT32 tlv_header; |
| /** Request ID of the WMI_EXTSCAN_CONFIGURE_HOTLIST_SSID_MONITOR_CMDID that configured the table */ |
| A_UINT32 config_request_id; |
| /** Requestor ID of the WMI_EXTSCAN_CONFIGURE_HOTLIST_SSID_MONITOR_CMDID |
| that configured the table */ |
| A_UINT32 config_requestor_id; |
| /** |
| * VDEV id(interface) of the |
| * WMI_EXTSCAN_CONFIGURE_HOTLIST_SSID_MONITOR_CMDID that configured the table |
| */ |
| A_UINT32 config_vdev_id; |
| /** table ID - to allow support for multiple simultaneous tables */ |
| A_UINT32 table_id; |
| /**total number of ssids (in all pages) */ |
| A_UINT32 total_entries; |
| /**index of the first ssid entry found in the TLV wmi_extscan_wlan_descriptor*/ |
| A_UINT32 first_entry_index; |
| /**number of ssids in this page */ |
| A_UINT32 num_entries_in_page; |
| /* Following this structure is the TLV: |
| * wmi_extscan_wlan_descriptor hotlist_match[]; |
| * number of descriptors given by field num_entries_in_page |
| */ |
| } wmi_extscan_hotlist_ssid_match_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */ |
| /** table ID - to allow support for multiple simultaneous tables */ |
| A_UINT32 table_id; |
| /** size in bytes of scan cache entry */ |
| A_UINT32 scan_cache_entry_size; |
| /** maximum number of scan cache entries */ |
| A_UINT32 max_scan_cache_entries; |
| /** maximum number of buckets per extscan request */ |
| A_UINT32 max_buckets; |
| /** maximum number of BSSIDs that will be stored in each scan (best n/w as per RSSI) */ |
| A_UINT32 max_bssid_per_scan; |
| /** table usage level at which indication must be sent to host */ |
| A_UINT32 max_table_usage_threshold; |
| } wmi_extscan_cache_capabilities; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */ |
| /** table ID - to allow support for multiple simultaneous tables */ |
| A_UINT32 table_id; |
| /** size in bytes of wlan change entry */ |
| A_UINT32 wlan_change_entry_size; |
| /** maximum number of entries in wlan change table */ |
| A_UINT32 max_wlan_change_entries; |
| /** number of RSSI samples used for averaging RSSI */ |
| A_UINT32 max_rssi_averaging_samples; |
| /** number of BSSID/RSSI entries (BSSID pointer, RSSI, timestamp) that device can hold */ |
| A_UINT32 max_rssi_history_entries; |
| } wmi_extscan_wlan_change_monitor_capabilities; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */ |
| /** table ID - to allow support for multiple simultaneous tables */ |
| A_UINT32 table_id; |
| /** size in bytes of hotlist entry */ |
| A_UINT32 wlan_hotlist_entry_size; |
| /** maximum number of entries in wlan change table */ |
| A_UINT32 max_hotlist_entries; |
| } wmi_extscan_hotlist_monitor_capabilities; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_set_capabilities_cmd_fixed_param */ |
| /** Request ID - matches request ID used to start hot list monitoring */ |
| A_UINT32 request_id; |
| /** Requestor ID - client requesting stop */ |
| A_UINT32 requestor_id; |
| /** number of extscan caches */ |
| A_UINT32 num_extscan_cache_tables; |
| /** number of wlan change lists */ |
| A_UINT32 num_wlan_change_monitor_tables; |
| /** number of hotlists */ |
| A_UINT32 num_hotlist_monitor_tables; |
| /** if one sided rtt data collection is supported */ |
| A_UINT32 rtt_one_sided_supported; |
| /** if 11v data collection is supported */ |
| A_UINT32 rtt_11v_supported; |
| /** if 11mc data collection is supported */ |
| A_UINT32 rtt_ftm_supported; |
| /** number of extscan cache capabilities (one per table) */ |
| A_UINT32 num_extscan_cache_capabilities; |
| /** number of wlan change capabilities (one per table) */ |
| A_UINT32 num_extscan_wlan_change_capabilities; |
| /** number of extscan hotlist capabilities (one per table) */ |
| A_UINT32 num_extscan_hotlist_capabilities; |
| /* Following this structure is the TLV: |
| * wmi_extscan_cache_capabilities extscan_cache_capabilities; // number of capabilities given by num_extscan_caches |
| * wmi_extscan_wlan_change_monitor_capabilities wlan_change_capabilities; // number of capabilities given by num_wlan_change_monitor_tables |
| * wmi_extscan_hotlist_monitor_capabilities hotlist_capabilities; // number of capabilities given by num_hotlist_monitor_tables |
| */ |
| } wmi_extscan_set_capabilities_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_get_capabilities_cmd_fixed_param */ |
| /** Request ID - matches request ID used to start hot list monitoring */ |
| A_UINT32 request_id; |
| /** Requestor ID - client requesting capabilities */ |
| A_UINT32 requestor_id; |
| } wmi_extscan_get_capabilities_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_start_stop_event_fixed_param */ |
| /** Request ID of the operation that was started/stopped */ |
| A_UINT32 request_id; |
| /** Requestor ID of the operation that was started/stopped */ |
| A_UINT32 requestor_id; |
| /** VDEV id(interface) of the operation that was started/stopped */ |
| A_UINT32 vdev_id; |
| /** extscan WMI command */ |
| A_UINT32 command; |
| /** operation mode: start/stop */ |
| A_UINT32 mode; /* wmi_extscan_operation_mode */ |
| /**success/failure */ |
| A_UINT32 status; /* enum wmi_extscan_start_stop_status */ |
| /** table ID - to allow support for multiple simultaneous requests */ |
| A_UINT32 table_id; |
| } wmi_extscan_start_stop_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_operation_event_fixed_param */ |
| /** Request ID of the extscan operation that is currently running */ |
| A_UINT32 request_id; |
| /** Requestor ID of the extscan operation that is currently running */ |
| A_UINT32 requestor_id; |
| /** VDEV id(interface) of the extscan operation that is currently running */ |
| A_UINT32 vdev_id; |
| /** scan event (wmi_scan_event_type) */ |
| A_UINT32 event; /* wmi_extscan_event_type */ |
| /** table ID - to allow support for multiple simultaneous requests */ |
| A_UINT32 table_id; |
| /**number of buckets */ |
| A_UINT32 num_buckets; |
| /* Following this structure is the TLV: |
| * A_UINT32 bucket_id[]; // number of elements given by field num_buckets. |
| */ |
| } wmi_extscan_operation_event_fixed_param; |
| |
| /* Types of extscan tables */ |
| typedef enum { |
| EXTSCAN_TABLE_NONE = 0, |
| EXTSCAN_TABLE_BSSID = 1, |
| EXTSCAN_TABLE_RSSI = 2, |
| } wmi_extscan_table_type; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_table_usage_event_fixed_param */ |
| /** Request ID of the extscan operation that is currently running */ |
| A_UINT32 request_id; |
| /** Requestor ID of the extscan operation that is currently running */ |
| A_UINT32 requestor_id; |
| /** VDEV id(interface) of the extscan operation that is currently running */ |
| A_UINT32 vdev_id; |
| /** table ID - to allow support for multiple simultaneous tables */ |
| A_UINT32 table_id; |
| /**see wmi_extscan_table_type for table reporting usage */ |
| A_UINT32 table_type; |
| /**number of entries in use */ |
| A_UINT32 entries_in_use; |
| /**maximum number of entries in table */ |
| A_UINT32 maximum_entries; |
| } wmi_extscan_table_usage_event_fixed_param; |
| |
| typedef enum { |
| /** |
| * Indicates scan got interrupted i.e. aborted or pre-empted for a long time (> 1sec) |
| * this can be used to discard scan results |
| */ |
| WMI_SCAN_STATUS_INTERRUPTED = 1 |
| } wmi_scan_status_flags; |
| |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */ |
| /**RSSI */ |
| A_UINT32 rssi; |
| /**time stamp in milliseconds */ |
| A_UINT32 tstamp; |
| /** Extscan cycle during which this entry was scanned */ |
| A_UINT32 scan_cycle_id; |
| /** |
| * flag to indicate if the given result was obtained as part of |
| * interrupted (aborted/large time gap preempted) scan |
| */ |
| A_UINT32 flags; |
| } wmi_extscan_rssi_info; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */ |
| /**bssid */ |
| wmi_mac_addr bssid; |
| /**ssid */ |
| wmi_ssid ssid; |
| /**channel number */ |
| A_UINT32 channel; |
| /* capabilities */ |
| A_UINT32 capabilities; |
| /* beacon interval in TUs */ |
| A_UINT32 beacon_interval; |
| /**time stamp in milliseconds - time last seen */ |
| A_UINT32 tstamp; |
| /**flags - _tExtScanEntryFlags */ |
| A_UINT32 flags; |
| /**RTT in ns */ |
| A_UINT32 rtt; |
| /**rtt standard deviation */ |
| A_UINT32 rtt_sd; |
| /* rssi information */ |
| A_UINT32 number_rssi_samples; |
| /** IE length */ |
| A_UINT32 ie_length; /* length of IE data */ |
| } wmi_extscan_wlan_descriptor; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_cached_results_event_fixed_param */ |
| /** Request ID of the WMI_EXTSCAN_GET_CACHED_RESULTS_CMDID */ |
| A_UINT32 request_id; |
| /** Requestor ID of the WMI_EXTSCAN_GET_CACHED_RESULTS_CMDID */ |
| A_UINT32 requestor_id; |
| /** VDEV id(interface) of the WMI_EXTSCAN_GET_CACHED_RESULTS_CMDID */ |
| A_UINT32 vdev_id; |
| /** Request ID of the extscan operation that is currently running */ |
| A_UINT32 extscan_request_id; |
| /** Requestor ID of the extscan operation that is currently running */ |
| A_UINT32 extscan_requestor_id; |
| /** VDEV id(interface) of the extscan operation that is currently running */ |
| A_UINT32 extscan_vdev_id; |
| /** table ID - to allow support for multiple simultaneous tables */ |
| A_UINT32 table_id; |
| /**current time stamp in seconds. Used to provide a baseline for the relative timestamps returned for each block and entry */ |
| A_UINT32 current_tstamp; |
| /**total number of bssids (in all pages) */ |
| A_UINT32 total_entries; |
| /**index of the first bssid entry found in the TLV wmi_extscan_wlan_descriptor*/ |
| A_UINT32 first_entry_index; |
| /**number of bssids in this page */ |
| A_UINT32 num_entries_in_page; |
| /* number of buckets scanned */ |
| A_UINT32 buckets_scanned; |
| /* Followed by the variable length TLVs |
| * wmi_extscan_wlan_descriptor bssid_list[] |
| * wmi_extscan_rssi_info rssi_list[] |
| * A_UINT8 ie_list[] |
| */ |
| } wmi_extscan_cached_results_event_fixed_param; |
| |
| typedef enum { |
| EXTSCAN_WLAN_CHANGE_FLAG_NONE = 0x00, |
| EXTSCAN_WLAN_CHANGE_FLAG_OUT_OF_RANGE = 0x01, |
| EXTSCAN_WLAN_CHANGE_FLAG_AP_LOST = 0x02, |
| } wmi_extscan_wlan_change_flags; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_ARRAY_STRUC */ |
| /**bssid */ |
| wmi_mac_addr bssid; |
| /**time stamp in milliseconds */ |
| A_UINT32 tstamp; |
| /**upper RSSI limit */ |
| A_UINT32 upper_rssi_limit; |
| /**lower RSSI limit */ |
| A_UINT32 lower_rssi_limit; |
| /** channel */ |
| A_UINT32 channel; /* in MHz */ |
| /**current RSSI average */ |
| A_UINT32 rssi_average; |
| /**flags - wmi_extscan_wlan_change_flags */ |
| A_UINT32 flags; |
| /**legnth of RSSI history to follow (number of values) */ |
| A_UINT32 num_rssi_samples; |
| } wmi_extscan_wlan_change_result_bssid; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_wlan_change_results_event_fixed_param */ |
| /** Request ID of the WMI_EXTSCAN_GET_WLAN_CHANGE_RESULTS_CMDID command that requested the results */ |
| A_UINT32 request_id; |
| /** Requestor ID of the WMI_EXTSCAN_GET_WLAN_CHANGE_RESULTS_CMDID command that requested the results */ |
| A_UINT32 requestor_id; |
| /** VDEV id(interface) of the WMI_EXTSCAN_GET_WLAN_CHANGE_RESULTS_CMDID command that requested the results */ |
| A_UINT32 vdev_id; |
| /** Request ID of the WMI_EXTSCAN_CONFIGURE_WLAN_CHANGE_MONITOR_CMDID command that configured the table */ |
| A_UINT32 config_request_id; |
| /** Requestor ID of the WMI_EXTSCAN_CONFIGURE_WLAN_CHANGE_MONITOR_CMDID command that configured the table */ |
| A_UINT32 config_requestor_id; |
| /** VDEV id(interface) of the WMI_EXTSCAN_CONFIGURE_WLAN_CHANGE_MONITOR_CMDID command that configured the table */ |
| A_UINT32 config_vdev_id; |
| /** table ID - to allow support for multiple simultaneous tables */ |
| A_UINT32 table_id; |
| /**number of entries with RSSI out of range or BSSID not detected */ |
| A_UINT32 change_count; |
| /**total number of bssid signal descriptors (in all pages) */ |
| A_UINT32 total_entries; |
| /**index of the first bssid signal descriptor entry found in the TLV wmi_extscan_wlan_descriptor*/ |
| A_UINT32 first_entry_index; |
| /**number of bssids signal descriptors in this page */ |
| A_UINT32 num_entries_in_page; |
| /* Following this structure is the TLV: |
| * wmi_extscan_wlan_change_result_bssid bssid_signal_descriptor_list[]; // number of descriptors given by field num_entries_in_page. |
| * Following this structure is the list of RSSI values (each is an A_UINT8): |
| * A_UINT8 rssi_list[]; // last N RSSI values. |
| */ |
| } wmi_extscan_wlan_change_results_event_fixed_param; |
| |
| enum _tExtScanEntryFlags { |
| WMI_HOTLIST_FLAG_NONE = 0x00, |
| WMI_HOTLIST_FLAG_PRESENCE = 0x01, |
| WMI_HOTLIST_FLAG_DUPLICATE_SSID = 0x80, |
| }; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_hotlist_match_event_fixed_param */ |
| /** Request ID of the WMI_EXTSCAN_CONFIGURE_HOTLIST_MONITOR_CMDID that configured the table */ |
| A_UINT32 config_request_id; |
| /** Requestor ID of the WMI_EXTSCAN_CONFIGURE_HOTLIST_MONITOR_CMDID that configured the table */ |
| A_UINT32 config_requestor_id; |
| /** VDEV id(interface) of the WMI_EXTSCAN_CONFIGURE_HOTLIST_MONITOR_CMDID that configured the table */ |
| A_UINT32 config_vdev_id; |
| /** table ID - to allow support for multiple simultaneous tables */ |
| A_UINT32 table_id; |
| /**total number of bssids (in all pages) */ |
| A_UINT32 total_entries; |
| /**index of the first bssid entry found in the TLV wmi_extscan_wlan_descriptor*/ |
| A_UINT32 first_entry_index; |
| /**number of bssids in this page */ |
| A_UINT32 num_entries_in_page; |
| /* Following this structure is the TLV: |
| * wmi_extscan_wlan_descriptor hotlist_match[]; // number of descriptors given by field num_entries_in_page. |
| */ |
| } wmi_extscan_hotlist_match_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_extscan_capabilities_event_fixed_param */ |
| /** Request ID of the WMI_EXTSCAN_GET_CAPABILITIES_CMDID */ |
| A_UINT32 request_id; |
| /** Requestor ID of the WMI_EXTSCAN_GET_CAPABILITIES_CMDID */ |
| A_UINT32 requestor_id; |
| /** VDEV id(interface) of the WMI_EXTSCAN_GET_CAPABILITIES_CMDID */ |
| A_UINT32 vdev_id; |
| /** number of extscan caches */ |
| A_UINT32 num_extscan_cache_tables; |
| /** number of wlan change lists */ |
| A_UINT32 num_wlan_change_monitor_tables; |
| /** number of hotlists */ |
| A_UINT32 num_hotlist_monitor_tables; |
| /** if one sided rtt data collection is supported */ |
| A_UINT32 rtt_one_sided_supported; |
| /** if 11v data collection is supported */ |
| A_UINT32 rtt_11v_supported; |
| /** if 11mc data collection is supported */ |
| A_UINT32 rtt_ftm_supported; |
| /** number of extscan cache capabilities (one per table) */ |
| A_UINT32 num_extscan_cache_capabilities; |
| /** number of wlan change capabilities (one per table) */ |
| A_UINT32 num_extscan_wlan_change_capabilities; |
| /** number of extscan hotlist capabilities (one per table) */ |
| A_UINT32 num_extscan_hotlist_capabilities; |
| /* max number of roaming ssid whitelist firmware can support */ |
| A_UINT32 num_roam_ssid_whitelist; |
| /* max number of blacklist bssid firmware can support */ |
| A_UINT32 num_roam_bssid_blacklist; |
| /* max number of preferred list firmware can support */ |
| A_UINT32 num_roam_bssid_preferred_list; |
| /* max number of hotlist ssids firmware can support */ |
| A_UINT32 num_extscan_hotlist_ssid; |
| /* max number of epno networks firmware can support */ |
| A_UINT32 num_epno_networks; |
| |
| /* Following this structure are the TLVs describing the capabilities of of the various types of lists. The FW theoretically |
| * supports multiple lists of each type. |
| * |
| * wmi_extscan_cache_capabilities extscan_cache_capabilities[] // capabilities of extscan cache (BSSID/RSSI lists) |
| * wmi_extscan_wlan_change_monitor_capabilities wlan_change_capabilities[] // capabilities of wlan_change_monitor_tables |
| * wmi_extscan_hotlist_monitor_capabilities hotlist_capabilities[] // capabilities of hotlist_monitor_tables |
| */ |
| } wmi_extscan_capabilities_event_fixed_param; |
| |
| /* WMI_D0_WOW_DISABLE_ACK_EVENTID */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_d0_wow_disable_ack_event_fixed_param */ |
| A_UINT32 reserved0; /* for future need */ |
| } wmi_d0_wow_disable_ack_event_fixed_param; |
| |
| /** WMI_PDEV_RESUME_EVENTID : generated in response to WMI_PDEV_RESUME_CMDID */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_resume_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| } wmi_pdev_resume_event_fixed_param; |
| |
| /** value representing all modules */ |
| #define WMI_DEBUG_LOG_MODULE_ALL 0xffff |
| |
| /* param definitions */ |
| |
| /** |
| * Log level for a given module. Value contains both module id and log level. |
| * here is the bitmap definition for value. |
| * module Id : 16 |
| * Flags : reserved |
| * Level : 8 |
| * if odule Id is WMI_DEBUG_LOG_MODULE_ALL then log level is applied to all modules (global). |
| * WMI_DEBUG_LOG_MIDULE_ALL will overwrites per module level setting. |
| */ |
| #define WMI_DEBUG_LOG_PARAM_LOG_LEVEL 0x1 |
| |
| #define WMI_DBGLOG_SET_LOG_LEVEL(val, lvl) do { \ |
| (val) |= (lvl & 0xff); \ |
| } while (0) |
| |
| #define WMI_DBGLOG_GET_LOG_LEVEL(val) ((val) & 0xff) |
| |
| #define WMI_DBGLOG_SET_MODULE_ID(val, mid) do { \ |
| (val) |= ((mid & 0xffff) << 16); \ |
| } while (0) |
| |
| #define WMI_DBGLOG_GET_MODULE_ID(val) (((val) >> 16) & 0xffff) |
| |
| /** |
| * Enable the debug log for a given vdev. Value is vdev id |
| */ |
| #define WMI_DEBUG_LOG_PARAM_VDEV_ENABLE 0x2 |
| |
| /** |
| * Disable the debug log for a given vdev. Value is vdev id |
| * All the log level for a given VDEV is disabled except the ERROR log messages |
| */ |
| |
| #define WMI_DEBUG_LOG_PARAM_VDEV_DISABLE 0x3 |
| |
| /** |
| * set vdev enable bitmap. value is the vden enable bitmap |
| */ |
| #define WMI_DEBUG_LOG_PARAM_VDEV_ENABLE_BITMAP 0x4 |
| |
| /** |
| * set a given log level to all the modules specified in the module bitmap. |
| * and set the log levle for all other modules to DBGLOG_ERR. |
| * value: log levelt to be set. |
| * module_id_bitmap : identifies the modules for which the log level should be set and |
| * modules for which the log level should be reset to DBGLOG_ERR. |
| */ |
| #define WMI_DEBUG_LOG_PARAM_MOD_ENABLE_BITMAP 0x5 |
| |
| #define NUM_MODULES_PER_ENTRY ((sizeof(A_UINT32)) << 3) |
| |
| #define WMI_MODULE_ENABLE(pmid_bitmap, mod_id) \ |
| ((pmid_bitmap)[(mod_id)/NUM_MODULES_PER_ENTRY] |= \ |
| (1 << ((mod_id)%NUM_MODULES_PER_ENTRY))) |
| |
| #define WMI_MODULE_DISABLE(pmid_bitmap, mod_id) \ |
| ((pmid_bitmap)[(mod_id)/NUM_MODULES_PER_ENTRY] &= \ |
| (~(1 << ((mod_id)%NUM_MODULES_PER_ENTRY)))) |
| |
| #define WMI_MODULE_IS_ENABLED(pmid_bitmap, mod_id) \ |
| (((pmid_bitmap)[(mod_id)/NUM_MODULES_PER_ENTRY] & \ |
| (1 << ((mod_id)%NUM_MODULES_PER_ENTRY))) != 0) |
| |
| #define MAX_MODULE_ID_BITMAP_WORDS 16 /* 16*32=512 module ids. should be more than sufficient */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_debug_log_config_cmd_fixed_param */ |
| A_UINT32 dbg_log_param; |
| /** param types are defined above */ |
| A_UINT32 value; |
| /* The below array will follow this tlv ->fixed length module_id_bitmap[] |
| A_UINT32 module_id_bitmap[MAX_MODULE_ID_BITMAP_WORDS]; |
| */ |
| } wmi_debug_log_config_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_get_temperature_cmd_fixed_param */ |
| A_UINT32 param; /* Reserved for future use */ |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| } wmi_pdev_get_temperature_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_temperature_event_fixed_param */ |
| A_INT32 value; /* temprature value in Celcius degree */ |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| } wmi_pdev_temperature_event_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_set_dhcp_server_offload_cmd_fixed_param */ |
| A_UINT32 vdev_id; |
| A_UINT32 enable; |
| A_UINT32 srv_ipv4; /* server IP */ |
| A_UINT32 start_lsb; /* starting address assigned to client */ |
| A_UINT32 num_client; /* number of clients we support */ |
| } wmi_set_dhcp_server_offload_cmd_fixed_param; |
| |
| typedef enum { |
| AP_RX_DATA_OFFLOAD = 0x00, |
| STA_RX_DATA_OFFLOAD = 0x01, |
| } wmi_ipa_offload_types; |
| |
| /** |
| * This command is sent from WLAN host driver to firmware for |
| * enabling/disabling IPA data-path offload features. |
| * |
| * |
| * Enabling data path offload to IPA(based on host INI configuration), example: |
| * when STA interface comes up, |
| * host->target: WMI_IPA_OFFLOAD_ENABLE_DISABLE_CMD, |
| * (enable = 1, vdev_id = STA vdev id, offload_type = STA_RX_DATA_OFFLOAD) |
| * |
| * Disabling data path offload to IPA, example: |
| * host->target: WMI_IPA_OFFLOAD_ENABLE_DISABLE_CMD, |
| * (enable = 0, vdev_id = STA vdev id, offload_type = STA_RX_DATA_OFFLOAD) |
| * |
| * |
| * This command is applicable only on the PCIE LL systems |
| * |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_ipa_offload_enable_disable_cmd_fixed_param */ |
| A_UINT32 offload_type; /* wmi_ipa_offload_types enum values */ |
| A_UINT32 vdev_id; |
| A_UINT32 enable; /* 1 == enable, 0 == disable */ |
| } wmi_ipa_offload_enable_disable_cmd_fixed_param; |
| |
| typedef enum { |
| WMI_LED_FLASHING_PATTERN_NOT_CONNECTED = 0, |
| WMI_LED_FLASHING_PATTERN_CONNECTED = 1, |
| WMI_LED_FLASHING_PATTERN_RESERVED = 2, |
| } wmi_set_led_flashing_type; |
| |
| /** |
| The state of the LED GPIO control is determined by two 32 bit values(X_0 and X_1) to produce a 64 bit value. |
| Each 32 bit value consists of 4 bytes, where each byte defines the number of 50ms intervals that the GPIO will |
| remain at a predetermined state. The 64 bit value provides 8 unique GPIO timing intervals. The pattern starts |
| with the MSB of X_0 and continues to the LSB of X_1. After executing the timer interval of the LSB of X_1, the |
| pattern returns to the MSB of X_0 and repeats. The GPIO state for each timing interval alternates from Low to |
| High and the first interval of the pattern represents the time when the GPIO is Low. When a timing interval of |
| Zero is reached, it is skipped and moves on to the next interval. |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_set_led_flashing_cmd_fixed_param */ |
| A_UINT32 pattern_id; /* pattern identifier */ |
| A_UINT32 led_x0; /* led flashing parameter0 */ |
| A_UINT32 led_x1; /* led flashing parameter1 */ |
| A_UINT32 gpio_num; /* GPIO number */ |
| } wmi_set_led_flashing_cmd_fixed_param; |
| |
| /** |
| * The purpose of the multicast Domain Name System (mDNS) is to resolve host names to IP addresses |
| * within small networks that do not include a local name server. |
| * It utilizes essentially the same programming interfaces, packet formats and operating semantics |
| * as the unicast DNS, and the advantage is zero configuration service while no need for central or |
| * global server. |
| * Based on mDNS, the DNS-SD (Service Discovery) allows clients to discover a named list of services |
| * by type in a specified domain using standard DNS queries. |
| * Here, we provide the ability to advertise the available services by responding to mDNS queries. |
| */ |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_mdns_offload_cmd_fixed_param */ |
| A_UINT32 vdev_id; |
| A_UINT32 enable; |
| } wmi_mdns_offload_cmd_fixed_param; |
| |
| #define WMI_MAX_MDNS_FQDN_LEN 64 |
| #define WMI_MAX_MDNS_RESP_LEN 512 |
| #define WMI_MDNS_FQDN_TYPE_GENERAL 0 |
| #define WMI_MDNS_FQDN_TYPE_UNIQUE 1 |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_mdns_set_fqdn_cmd_fixed_param */ |
| A_UINT32 vdev_id; |
| /** type of fqdn, general or unique */ |
| A_UINT32 type; |
| /** length of fqdn */ |
| A_UINT32 fqdn_len; |
| /* Following this structure is the TLV byte stream of fqdn data of length fqdn_len |
| * A_UINT8 fqdn_data[]; // fully-qualified domain name to check if match with the received queries |
| */ |
| } wmi_mdns_set_fqdn_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_mdns_set_resp_cmd_fixed_param */ |
| A_UINT32 vdev_id; |
| /** Answer Resource Record count */ |
| A_UINT32 AR_count; |
| /** length of response */ |
| A_UINT32 resp_len; |
| /* Following this structure is the TLV byte stream of resp data of length resp_len |
| * A_UINT8 resp_data[]; // responses consisits of Resource Records |
| */ |
| } wmi_mdns_set_resp_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_mdns_get_stats_cmd_fixed_param */ |
| A_UINT32 vdev_id; |
| } wmi_mdns_get_stats_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_mdns_stats_event_fixed_param */ |
| A_UINT32 vdev_id; |
| /** curTimestamp in milliseconds */ |
| A_UINT32 curTimestamp; |
| /** last received Query in milliseconds */ |
| A_UINT32 lastQueryTimestamp; |
| /** last sent Response in milliseconds */ |
| A_UINT32 lastResponseTimestamp; |
| /** stats of received queries */ |
| A_UINT32 totalQueries; |
| /** stats of macth queries */ |
| A_UINT32 totalMatches; |
| /** stats of responses */ |
| A_UINT32 totalResponses; |
| /** indicate the current status of mDNS offload */ |
| A_UINT32 status; |
| } wmi_mdns_stats_event_fixed_param; |
| |
| /** |
| * The purpose of the SoftAP authenticator offload is to offload the association and 4-way handshake process |
| * down to the firmware. When this feature is enabled, firmware can process the association/disassociation |
| * request and create/remove connection even host is suspended. |
| * 3 major components are offloaded: |
| * 1. ap-mlme. Firmware will process auth/deauth, association/disassociation request and send out response. |
| * 2. 4-way handshake. Firmware will send out m1/m3 and receive m2/m4. |
| * 3. key installation. Firmware will generate PMK from the psk info which is sent from the host and install PMK/GTK. |
| * Current implementation only supports WPA2 CCMP. |
| */ |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_sap_ofl_enable_cmd_fixed_param */ |
| /** VDEV id(interface) of the WMI_SAP_OFL_ENABLE_CMDID */ |
| A_UINT32 vdev_id; |
| /** enable/disable sap auth offload */ |
| A_UINT32 enable; |
| /** sap ssid */ |
| wmi_ssid ap_ssid; |
| /** authentication mode (defined above) */ |
| A_UINT32 rsn_authmode; |
| /** unicast cipher set */ |
| A_UINT32 rsn_ucastcipherset; |
| /** mcast/group cipher set */ |
| A_UINT32 rsn_mcastcipherset; |
| /** mcast/group management frames cipher set */ |
| A_UINT32 rsn_mcastmgmtcipherset; |
| /** sap channel */ |
| A_UINT32 channel; |
| /** length of psk */ |
| A_UINT32 psk_len; |
| /* Following this structure is the TLV byte stream of wpa passphrase data of length psk_len |
| * A_UINT8 psk[]; |
| */ |
| } wmi_sap_ofl_enable_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_sap_ofl_add_sta_event_fixed_param */ |
| /** VDEV id(interface) of the WMI_SAP_OFL_ADD_STA_EVENTID */ |
| A_UINT32 vdev_id; |
| /** aid (association id) of this station */ |
| A_UINT32 assoc_id; |
| /** peer station's mac addr */ |
| wmi_mac_addr peer_macaddr; |
| /** length of association request frame */ |
| A_UINT32 data_len; |
| /* Following this structure is the TLV byte stream of a whole association request frame of length data_len |
| * A_UINT8 bufp[]; |
| */ |
| } wmi_sap_ofl_add_sta_event_fixed_param; |
| |
| typedef enum { |
| SAP_OFL_DEL_STA_FLAG_NONE = 0x00, |
| SAP_OFL_DEL_STA_FLAG_RECONNECT = 0x01, |
| } wmi_sap_ofl_del_sta_flags; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_sap_ofl_del_sta_event_fixed_param */ |
| /** VDEV id(interface) of the WMI_SAP_OFL_DEL_STA_EVENTID */ |
| A_UINT32 vdev_id; |
| /** aid (association id) of this station */ |
| A_UINT32 assoc_id; |
| /** peer station's mac addr */ |
| wmi_mac_addr peer_macaddr; |
| /** disassociation reason */ |
| A_UINT32 reason; |
| /** flags - wmi_sap_ofl_del_sta_flags */ |
| A_UINT32 flags; |
| } wmi_sap_ofl_del_sta_event_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_sap_set_blacklist_param_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| /* Number of client failure connection attempt */ |
| A_UINT32 num_retry; |
| /*Time in milliseconds to record the client's failure connection attempts*/ |
| A_UINT32 retry_allow_time_ms; |
| /* |
| * Time in milliseconds to drop the connection request if |
| * client is blacklisted |
| */ |
| A_UINT32 blackout_time_ms; |
| } wmi_sap_set_blacklist_param_cmd_fixed_param; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_apfind_cmd_param */ |
| A_UINT32 data_len; /** length in byte of data[]. */ |
| /** This structure is used to send REQ binary blobs |
| * from application/service to firmware where Host drv is pass through . |
| * Following this structure is the TLV: |
| * A_UINT8 data[]; // length in byte given by field data_len. |
| */ |
| } wmi_apfind_cmd_param; |
| |
| typedef enum apfind_event_type_e { |
| APFIND_MATCH_EVENT = 0, |
| APFIND_WAKEUP_EVENT, |
| } APFIND_EVENT_TYPE; |
| |
| typedef struct { |
| A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_apfind_event_hdr */ |
| A_UINT32 event_type; /** APFIND_EVENT_TYPE */ |
| A_UINT32 data_len; /** length in byte of data[]. */ |
| /** This structure is used to send event binary blobs |
| * from firmware to application/service and Host drv. |
| * Following this structure is the TLV: |
| * A_UINT8 data[]; // length in byte given by field data_len. |
| */ |
| } wmi_apfind_event_hdr; |
| |
| /** |
| * OCB DCC types and structures. |
| */ |
| |
| /** |
| * DCC types as described in ETSI TS 102 687 |
| * Type Format stepSize referenceValue numBits |
| * ------------------------------------------------------------------------- |
| * ndlType_acPrio INTEGER (0...7) 1 number 3 |
| * ndlType_controlLoop INTEGER (0...7) 1 0 3 |
| * ndlType_arrivalRate INTEGER (0..8191) 0.01 /s 0 13 |
| * ndlType_channelLoad INTEGER (0..1000) 0.1 % 0 % 10 |
| * ndlType_channelUse INTEGER (0..8000) 0.0125 % 0 % 13 |
| * ndlType_datarate INTEGER (0..7) Table 8 3 |
| * ndlType_distance INTEGER (0..4095) 1 m 0 12 |
| * ndlType_numberElements INTEGER (0..63) number 6 |
| * ndlType_packetDuration INTEGER (0..2047) TSYM 0 11 |
| * ndlType_packetInterval INTEGER (0..1023) 10 ms 0 10 |
| * ndlType_pathloss INTEGER (0..31) 0.1 1.0 5 |
| * ndlType_rxPower INTEGER (0..127) -0.5 dB -40 dBm 7 |
| * ndlType_snr INTEGER (0..127) 0.5 dB -10 dB 7 |
| * ndlType_timing INTEGER (0..4095) 10 ms 0 12 |
| * ndlType_txPower INTEGER (0..127) 0.5 dB -20 dBm 7 |
| * ndlType_ratio INTEGER (0..100) 1 % 0 % 7 |
| * ndlType_exponent INTEGER (0..100) 0.1 0 7 |
| * ndlType_queueStatus Enumeration Table A.2 1 |
| * ndlType_dccMechanism Bitset Table A.2 6 |
| * |
| * NOTE: All of following size macros (SIZE_NDLTYPE_ACPRIO through SIZE_BYTE) |
| * cannot be changed without breaking WMI compatibility. |
| * |
| * NOTE: For each of the types, one additional bit is allocated. This |
| * leftmost bit is used to indicate that the value is invalid. |
| */ |
| #define SIZE_NDLTYPE_ACPRIO (1 + 3) |
| #define SIZE_NDLTYPE_CONTROLLOOP (1 + 3) |
| #define SIZE_NDLTYPE_ARRIVALRATE (1 + 13) |
| #define SIZE_NDLTYPE_CHANNELLOAD (1 + 10) |
| #define SIZE_NDLTYPE_CHANNELUSE (1 + 13) |
| #define SIZE_NDLTYPE_DATARATE (1 + 3) |
| #define SIZE_NDLTYPE_DISTANCE (1 + 12) |
| #define SIZE_NDLTYPE_NUMBERELEMENTS (1 + 6) |
| #define SIZE_NDLTYPE_PACKETDURATION (1 + 11) |
| #define SIZE_NDLTYPE_PACKETINTERVAL (1 + 10) |
| #define SIZE_NDLTYPE_PATHLOSS (1 + 5) |
| #define SIZE_NDLTYPE_RXPOWER (1 + 7) |
| #define SIZE_NDLTYPE_SNR (1 + 7) |
| #define SIZE_NDLTYPE_TIMING (1 + 12) |
| #define SIZE_NDLTYPE_TXPOWER (1 + 7) |
| #define SIZE_NDLTYPE_RATIO (1 + 7) |
| #define SIZE_NDLTYPE_EXPONENT (1 + 7) |
| #define SIZE_NDLTYPE_QUEUESTATUS (1 + 1) |
| #define SIZE_NDLTYPE_DCCMECHANISM (1 + 6) |
| #define SIZE_BYTE (8) |
| |
| #define INVALID_ACPRIO ((1 << SIZE_NDLTYPE_ACPRIO) - 1) |
| #define INVALID_CONTROLLOOP ((1 << SIZE_NDLTYPE_CONTROLLOOP) - 1) |
| #define INVALID_ARRIVALRATE ((1 << SIZE_NDLTYPE_ARRIVALRATE) - 1) |
| #define INVALID_CHANNELLOAD ((1 << SIZE_NDLTYPE_CHANNELLOAD) - 1) |
| #define INVALID_CHANNELUSE ((1 << SIZE_NDLTYPE_CHANNELUSE) - 1) |
| #define INVALID_DATARATE ((1 << SIZE_NDLTYPE_DATARATE) - 1) |
| #define INVALID_DISTANCE ((1 << SIZE_NDLTYPE_DISTANCE) - 1) |
| #define INVALID_NUMBERELEMENTS ((1 << SIZE_NDLTYPE_NUMBERELEMENTS) - 1) |
| #define INVALID_PACKETDURATION ((1 << SIZE_NDLTYPE_PACKETDURATION) - 1) |
| #define INVALID_PACKETINTERVAL ((1 << SIZE_NDLTYPE_PACKETINTERVAL) - 1) |
| #define INVALID_PATHLOSS ((1 << SIZE_NDLTYPE_PATHLOSS) - 1) |
| #define INVALID_RXPOWER ((1 << SIZE_NDLTYPE_RXPOWER) - 1) |
| #define INVALID_SNR ((1 << SIZE_NDLTYPE_SNR) - 1) |
| #define INVALID_TIMING ((1 << SIZE_NDLTYPE_TIMING) - 1) |
| #define INVALID_TXPOWER ((1 << SIZE_NDLTYPE_TXPOWER) - 1) |
| #define INVALID_RATIO ((1 << SIZE_NDLTYPE_RATIO) - 1) |
| #define INVALID_EXPONENT ((1 << SIZE_NDLTYPE_EXPONENT) - 1) |
| #define INVALID_QUEUESTATS ((1 << SIZE_NDLTYPE_QUEUESTATUS) - 1) |
| #define INVALID_DCCMECHANISM ((1 << SIZE_NDLTYPE_DCCMECHANISM) - 1) |
| |
| /** |
| * The MCS_COUNT macro cannot be modified without breaking |
| * WMI compatibility. |
| */ |
| #define MCS_COUNT (8) |
| |
| /** |
| * Flags for ndlType_dccMechanism. |
| */ |
| typedef enum { |
| DCC_MECHANISM_TPC = 1, |
| DCC_MECHANISM_TRC = 2, |
| DCC_MECHANISM_TDC = 4, |
| DCC_MECHANISM_DSC = 8, |
| DCC_MECHANISM_TAC = 16, |
| DCC_MECHANISM_RESERVED = 32, |
| DCC_MECHANISM_ALL = 0x3f, |
| } wmi_dcc_ndl_type_dcc_mechanism; |
| |
| /** Values for ndlType_queueStatus. */ |
| typedef enum { |
| DCC_QUEUE_CLOSED = 0, |
| DCC_QUEUE_OPEN = 1, |
| } wmi_dcc_ndl_type_queue_status; |
| |
| /** |
| * For ndlType_acPrio, use the values in wmi_traffic_ac. |
| * Values for ndlType_datarate. |
| */ |
| typedef enum { |
| DCC_DATARATE_3_MBPS = 0, |
| DCC_DATARATE_4_5_MBPS = 1, |
| DCC_DATARATE_6_MBPS = 2, |
| DCC_DATARATE_9_MBPS = 3, |
| DCC_DATARATE_12_MBPS = 4, |
| DCC_DATARATE_18_MBPS = 5, |
| DCC_DATARATE_24_MBPS = 6, |
| DCC_DATARATE_27_MBPS = 7, |
| } wmi_dcc_ndl_type_datarate; |
| |
| /** Data structure for active state configuration. */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_dcc_ndl_active_state_config |
| */ |
| A_UINT32 tlv_header; |
| /** |
| * NDL_asStateId, ndlType_numberElements, 1+6 bits. |
| * NDL_asChanLoad, ndlType_channelLoad, 1+10 bits. |
| */ |
| A_UINT32 state_info; |
| /** |
| * NDL_asDcc(AC_BK), ndlType_dccMechanism, 1+6 bits. |
| * NDL_asDcc(AC_BE), ndlType_dccMechanism, 1+6 bits. |
| * NDL_asDcc(AC_VI), ndlType_dccMechanism, 1+6 bits. |
| * NDL_asDcc(AC_VO), ndlType_dccMechanism, 1+6 bits. |
| */ |
| A_UINT32 as_dcc[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_DCCMECHANISM)]; |
| /** |
| * NDL_asTxPower(AC_BK), ndlType_txPower, 1+7 bits. |
| * NDL_asTxPower(AC_BE), ndlType_txPower, 1+7 bits. |
| * NDL_asTxPower(AC_VI), ndlType_txPower, 1+7 bits. |
| * NDL_asTxPower(AC_VO), ndlType_txPower, 1+7 bits. |
| */ |
| A_UINT32 as_tx_power_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_TXPOWER)]; |
| /** |
| * NDL_asPacketInterval(AC_BK), ndlType_packetInterval, 1+10 bits. |
| * NDL_asPacketInterval(AC_BE), ndlType_packetInterval, 1+10 bits. |
| * NDL_asPacketInterval(AC_VI), ndlType_packetInterval, 1+10 bits. |
| * NDL_asPacketInterval(AC_VO), ndlType_packetInterval, 1+10 bits. |
| */ |
| A_UINT32 as_packet_interval_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_PACKETINTERVAL)]; |
| /** |
| * NDL_asDatarate(AC_BK), ndlType_datarate, 1+3 bits. |
| * NDL_asDatarate(AC_BE), ndlType_datarate, 1+3 bits. |
| * NDL_asDatarate(AC_VI), ndlType_datarate, 1+3 bits. |
| * NDL_asDatarate(AC_VO), ndlType_datarate, 1+3 bits. |
| */ |
| A_UINT32 as_datarate_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_DATARATE)]; |
| /** |
| * NDL_asCarrierSense(AC_BK), ndlType_rxPower, 1+7 bits. |
| * NDL_asCarrierSense(AC_BE), ndlType_rxPower, 1+7 bits. |
| * NDL_asCarrierSense(AC_VI), ndlType_rxPower, 1+7 bits. |
| * NDL_asCarrierSense(AC_VO), ndlType_rxPower, 1+7 bits. |
| */ |
| A_UINT32 as_carrier_sense_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_RXPOWER)]; |
| } wmi_dcc_ndl_active_state_config; |
| |
| #define WMI_NDL_AS_STATE_ID_GET(ptr) WMI_GET_BITS((ptr)->state_info, 0, 7) |
| #define WMI_NDL_AS_STATE_ID_SET(ptr, val) WMI_SET_BITS((ptr)->state_info, 0, 7, val) |
| #define WMI_NDL_AS_CHAN_LOAD_GET(ptr) WMI_GET_BITS((ptr)->state_info, 7, 11) |
| #define WMI_NDL_AS_CHAN_LOAD_SET(ptr, val) WMI_SET_BITS((ptr)->state_info, 7, 11, val) |
| #define WMI_NDL_AS_DCC_GET(ptr, acprio) wmi_packed_arr_get_bits((ptr)->as_dcc, acprio, SIZE_NDLTYPE_DCCMECHANISM) |
| #define WMI_NDL_AS_DCC_SET(ptr, acprio, val) wmi_packed_arr_set_bits((ptr)->as_dcc, acprio, SIZE_NDLTYPE_DCCMECHANISM, val) |
| #define WMI_NDL_AS_TX_POWER_GET(ptr, acprio) wmi_packed_arr_get_bits((ptr)->as_tx_power_ac, acprio, SIZE_NDLTYPE_TXPOWER) |
| #define WMI_NDL_AS_TX_POWER_SET(ptr, acprio, val) wmi_packed_arr_set_bits((ptr)->as_tx_power_ac, acprio, SIZE_NDLTYPE_TXPOWER, val) |
| #define WMI_NDL_AS_PACKET_INTERVAL_GET(ptr, acprio) wmi_packed_arr_get_bits((ptr)->as_packet_interval_ac, acprio, SIZE_NDLTYPE_PACKETINTERVAL) |
| #define WMI_NDL_AS_PACKET_INTERVAL_SET(ptr, acprio, val) wmi_packed_arr_set_bits((ptr)->as_packet_interval_ac, acprio, SIZE_NDLTYPE_PACKETINTERVAL, val) |
| #define WMI_NDL_AS_DATARATE_GET(ptr, acprio) wmi_packed_arr_get_bits((ptr)->as_datarate_ac, acprio, SIZE_NDLTYPE_DATARATE) |
| #define WMI_NDL_AS_DATARATE_SET(ptr, acprio, val) wmi_packed_arr_set_bits((ptr)->as_datarate_ac, acprio, SIZE_NDLTYPE_DATARATE, val) |
| #define WMI_NDL_AS_CARRIER_SENSE_GET(ptr, acprio) wmi_packed_arr_get_bits((ptr)->as_carrier_sense_ac, acprio, SIZE_NDLTYPE_RXPOWER) |
| #define WMI_NDL_AS_CARRIER_SENSE_SET(ptr, acprio, val) wmi_packed_arr_set_bits((ptr)->as_carrier_sense_ac, acprio, SIZE_NDLTYPE_RXPOWER, val) |
| |
| /** Data structure for EDCA/QOS parameters. */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_qos_parameter */ |
| A_UINT32 tlv_header; |
| /** Arbitration Inter-Frame Spacing. Range: 2-15 */ |
| A_UINT32 aifsn; |
| /** Contention Window minimum. Range: 1 - 10 */ |
| A_UINT32 cwmin; |
| /** Contention Window maximum. Range: 1 - 10 */ |
| A_UINT32 cwmax; |
| } wmi_qos_parameter; |
| |
| /** Data structure for information specific to a channel. */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ocb_channel */ |
| A_UINT32 tlv_header; |
| A_UINT32 bandwidth; /* MHz units */ |
| wmi_mac_addr mac_address; |
| } wmi_ocb_channel; |
| |
| /** Data structure for an element of the schedule array. */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ocb_schedule_element */ |
| A_UINT32 tlv_header; |
| A_UINT32 channel_freq; /* MHz units */ |
| A_UINT32 total_duration; /* ms units */ |
| A_UINT32 guard_interval; /* ms units */ |
| } wmi_ocb_schedule_element; |
| |
| /** Data structure for OCB configuration. */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ocb_set_config_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** VDEV id(interface) that is being configured */ |
| A_UINT32 vdev_id; |
| A_UINT32 channel_count; |
| A_UINT32 schedule_size; |
| A_UINT32 flags; |
| |
| /** This is followed by a TLV array of wmi_channel. |
| * This is followed by a TLV array of wmi_ocb_channel. |
| * This is followed by a TLV array of wmi_qos_parameter. |
| * This is followed by a TLV array of wmi_dcc_ndl_chan. |
| * This is followed by a TLV array of wmi_dcc_ndl_active_state_config. |
| * This is followed by a TLV array of wmi_ocb_schedule_element. |
| */ |
| } wmi_ocb_set_config_cmd_fixed_param; |
| |
| |
| #define EXPIRY_TIME_IN_TSF_TIMESTAMP_OFFSET 0 |
| #define EXPIRY_TIME_IN_TSF_TIMESTAMP_MASK 1 |
| |
| #define WMI_OCB_EXPIRY_TIME_IN_TSF(ptr) \ |
| (((ptr)->flags & EXPIRY_TIME_IN_TSF_TIMESTAMP_MASK) >> EXPIRY_TIME_IN_TSF_TIMESTAMP_OFFSET) |
| |
| |
| /** Data structure for the response to the WMI_OCB_SET_CONFIG_CMDID command. */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ocb_set_config_resp_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /* VDEV id(interface)*/ |
| A_UINT32 vdev_id; |
| A_UINT32 status; |
| } wmi_ocb_set_config_resp_event_fixed_param; |
| |
| /* SIZE_UTC_TIME and SIZE_UTC_TIME_ERROR cannot be modified without breaking |
| * WMI compatibility. |
| */ |
| /* The size of the utc time in bytes. */ |
| #define SIZE_UTC_TIME (10) |
| /* The size of the utc time error in bytes. */ |
| #define SIZE_UTC_TIME_ERROR (5) |
| |
| /** Data structure to set the UTC time. */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ocb_set_utc_time_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /*VDEV Identifier*/ |
| A_UINT32 vdev_id; |
| /** 10 bytes of the utc time. */ |
| A_UINT32 utc_time[WMI_PACKED_ARR_SIZE(SIZE_UTC_TIME, SIZE_BYTE)]; |
| /** 5 bytes of the time error. */ |
| A_UINT32 time_error[WMI_PACKED_ARR_SIZE(SIZE_UTC_TIME_ERROR, SIZE_BYTE)]; |
| } wmi_ocb_set_utc_time_cmd_fixed_param; |
| |
| #define WMI_UTC_TIME_GET(ptr, byte_index) wmi_packed_arr_get_bits((ptr)->utc_time, byte_index, SIZE_BYTE) |
| #define WMI_UTC_TIME_SET(ptr, byte_index, val) wmi_packed_arr_set_bits((ptr)->utc_time, byte_index, SIZE_BYTE, val) |
| #define WMI_TIME_ERROR_GET(ptr, byte_index) wmi_packed_arr_get_bits((ptr)->time_error, byte_index, SIZE_BYTE) |
| #define WMI_TIME_ERROR_SET(ptr, byte_index, val) wmi_packed_arr_set_bits((ptr)->time_error, byte_index, SIZE_BYTE, val) |
| |
| /** Data structure start the timing advertisement. The template for the |
| * timing advertisement frame follows this structure in the WMI command. |
| */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ocb_start_timing_advert_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /*VDEV Identifier*/ |
| A_UINT32 vdev_id; |
| /** Number of times the TA is sent every 5 seconds. */ |
| A_UINT32 repeat_rate; |
| /** The frequency on which to transmit. */ |
| A_UINT32 channel_freq; /* MHz units */ |
| /** The offset into the template of the timestamp. */ |
| A_UINT32 timestamp_offset; |
| /** The offset into the template of the time value. */ |
| A_UINT32 time_value_offset; |
| /** The length of the timing advertisement template. The |
| * template is in the TLV data. */ |
| A_UINT32 timing_advert_template_length; |
| /** This is followed by a binary array containing the TA template. */ |
| } wmi_ocb_start_timing_advert_cmd_fixed_param; |
| |
| /** Data structure to stop the timing advertisement. */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ocb_stop_timing_advert_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /*VDEV Identifier*/ |
| A_UINT32 vdev_id; |
| A_UINT32 channel_freq; /* MHz units */ |
| } wmi_ocb_stop_timing_advert_cmd_fixed_param; |
| |
| /** Data structure for the request for WMI_OCB_GET_TSF_TIMER_CMDID. */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ocb_get_tsf_timer_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /*VDEV Identifier*/ |
| A_UINT32 vdev_id; |
| A_UINT32 reserved; |
| } wmi_ocb_get_tsf_timer_cmd_fixed_param; |
| |
| /** Data structure for the response to WMI_OCB_GET_TSF_TIMER_CMDID. */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ocb_get_tsf_timer_resp_event_fixed_param */ |
| A_UINT32 tlv_header; |
| /*VDEV Identifier*/ |
| A_UINT32 vdev_id; |
| A_UINT32 tsf_timer_high; |
| A_UINT32 tsf_timer_low; |
| } wmi_ocb_get_tsf_timer_resp_event_fixed_param; |
| |
| /** Data structure for DCC stats configuration per channel. */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_dcc_ndl_stats_per_channel */ |
| A_UINT32 tlv_header; |
| |
| /*VDEV Identifier*/ |
| A_UINT32 vdev_id; |
| |
| /** The channel for which this applies, 16 bits. |
| * The dcc_stats_bitmap, 8 bits. */ |
| A_UINT32 chan_info; |
| |
| /** Demodulation model parameters. |
| * |
| * NDL_snrBackoff(MCS0), ndlType_snr, 1+7 bits. |
| * NDL_snrBackoff(MCS1), ndlType_snr, 1+7 bits. |
| * NDL_snrBackoff(MCS2), ndlType_snr, 1+7 bits. |
| * NDL_snrBackoff(MCS3), ndlType_snr, 1+7 bits. |
| * NDL_snrBackoff(MCS4), ndlType_snr, 1+7 bits. |
| * NDL_snrBackoff(MCS5), ndlType_snr, 1+7 bits. |
| * NDL_snrBackoff(MCS6), ndlType_snr, 1+7 bits. |
| * NDL_snrBackoff(MCS7), ndlType_snr, 1+7 bits. |
| */ |
| A_UINT32 snr_backoff_mcs[WMI_PACKED_ARR_SIZE(MCS_COUNT, SIZE_NDLTYPE_SNR)]; |
| |
| /** Communication ranges. |
| * |
| * tx_power, ndlType_txPower, 1+7 bits. |
| * datarate, ndlType_datarate, 1+3 bits. |
| */ |
| A_UINT32 tx_power_datarate; |
| /** |
| * NDL_carrierSenseRange, ndlType_distance, 1+12 bits. |
| * NDL_estCommRange, ndlType_distance, 1+12 bits. |
| */ |
| A_UINT32 carrier_sense_est_comm_range; |
| |
| /** Channel load measures. */ |
| /** |
| * dccSensitivity, ndlType_rxPower, 1+7 bits. |
| * carrierSense, ndlType_rxPower, 1+7 bits. |
| * NDL_channelLoad, ndlType_channelLoad, 1+10 bits. |
| */ |
| A_UINT32 dcc_stats; |
| /** |
| * NDL_packetArrivalRate, ndlType_arrivalRate, 1+13 bits. |
| * NDL_packetAvgDuration, ndlType_packetDuration, 1+11 bits. |
| */ |
| A_UINT32 packet_stats; |
| /** |
| * NDL_channelBusyTime, ndlType_channelLoad, 1+10 bits. |
| */ |
| A_UINT32 channel_busy_time; |
| /** |
| *Transmit packet statistics. |
| * NDL_txPacketArrivalRate(AC_BK), ndlType_arrivalRate, 1+13 bits. |
| * NDL_txPacketArrivalRate(AC_BE), ndlType_arrivalRate, 1+13 bits. |
| * NDL_txPacketArrivalRate(AC_VI), ndlType_arrivalRate, 1+13 bits. |
| * NDL_txPacketArrivalRate(AC_VO), ndlType_arrivalRate, 1+13 bits. |
| */ |
| A_UINT32 tx_packet_arrival_rate_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_ARRIVALRATE)]; |
| /** |
| * NDL_txPacketAvgDuration(AC_BK), ndlType_packetDuration, 1+11 bits. |
| * NDL_txPacketAvgDuration(AC_BE), ndlType_packetDuration, 1+11 bits. |
| * NDL_txPacketAvgDuration(AC_VI), ndlType_packetDuration, 1+11 bits. |
| * NDL_txPacketAvgDuration(AC_VO), ndlType_packetDuration, 1+11 bits. |
| */ |
| A_UINT32 tx_packet_avg_duration_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_PACKETDURATION)]; |
| /** |
| * NDL_txChannelUse(AC_BK), ndlType_channelUse, 1+13 bits. |
| * NDL_txChannelUse(AC_BE), ndlType_channelUse, 1+13 bits. |
| * NDL_txChannelUse(AC_VI), ndlType_channelUse, 1+13 bits. |
| * NDL_txChannelUse(AC_VO), ndlType_channelUse, 1+13 bits. |
| */ |
| A_UINT32 tx_channel_use_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_CHANNELUSE)]; |
| /** |
| * NDL_txSignalAvgPower(AC_BK), ndlType_txPower, 1+7 bits. |
| * NDL_txSignalAvgPower(AC_BE), ndlType_txPower, 1+7 bits. |
| * NDL_txSignalAvgPower(AC_VI), ndlType_txPower, 1+7 bits. |
| * NDL_txSignalAvgPower(AC_VO), ndlType_txPower, 1+7 bits. |
| */ |
| A_UINT32 tx_signal_avg_power_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_TXPOWER)]; |
| } wmi_dcc_ndl_stats_per_channel; |
| |
| #define WMI_NDL_STATS_SNR_BACKOFF_GET(ptr, mcs) wmi_packed_arr_get_bits((ptr)->snr_backoff_mcs, mcs, SIZE_NDLTYPE_SNR) |
| #define WMI_NDL_STATS_SNR_BACKOFF_SET(ptr, mcs, val) wmi_packed_arr_set_bits((ptr)->snr_backoff_mcs, mcs, SIZE_NDLTYPE_SNR, val) |
| #define WMI_NDL_STATS_CHAN_FREQ_GET(ptr) WMI_GET_BITS((ptr)->chan_info, 0, 16) |
| #define WMI_NDL_STATS_CHAN_FREQ_SET(ptr, val) WMI_SET_BITS((ptr)->chan_info, 0, 16, val) |
| #define WMI_NDL_STATS_DCC_STATS_BITMAP_GET(ptr) WMI_GET_BITS((ptr)->chan_info, 16, 8) |
| #define WMI_NDL_STATS_DCC_STATS_BITMAP_SET(ptr, val) WMI_SET_BITS((ptr)->chan_info, 16, 8, val) |
| #define WMI_NDL_STATS_SNR_BACKOFF_GET(ptr, mcs) wmi_packed_arr_get_bits((ptr)->snr_backoff_mcs, mcs, SIZE_NDLTYPE_SNR) |
| #define WMI_NDL_STATS_SNR_BACKOFF_SET(ptr, mcs, val) wmi_packed_arr_set_bits((ptr)->snr_backoff_mcs, mcs, SIZE_NDLTYPE_SNR, val) |
| #define WMI_TX_POWER_GET(ptr) WMI_GET_BITS((ptr)->tx_power_datarate, 0, 8) |
| #define WMI_TX_POWER_SET(ptr, val) WMI_SET_BITS((ptr)->tx_power_datarate, 0, 8, val) |
| #define WMI_TX_DATARATE_GET(ptr) WMI_GET_BITS((ptr)->tx_power_datarate, 0, 4) |
| #define WMI_TX_DATARATE_SET(ptr, val) WMI_SET_BITS((ptr)->tx_power_datarate, 0, 4, val) |
| #define WMI_NDL_CARRIER_SENSE_RANGE_GET(ptr) WMI_GET_BITS((ptr)->carrier_sense_est_comm_range, 0, 13) |
| #define WMI_NDL_CARRIER_SENSE_RANGE_SET(ptr, val) WMI_SET_BITS((ptr)->carrier_sense_est_comm_range, 0, 13, val) |
| #define WMI_NDL_EST_COMM_RANGE_GET(ptr) WMI_GET_BITS((ptr)->carrier_sense_est_comm_range, 13, 13) |
| #define WMI_NDL_EST_COMM_RANGE_SET(ptr, val) WMI_SET_BITS((ptr)->carrier_sense_est_comm_range, 13, 13, val) |
| #define WMI_DCC_SENSITIVITY_GET(ptr) WMI_GET_BITS((ptr)->dcc_stats, 0, 8) |
| #define WMI_DCC_SENSITIVITY_SET(ptr, val) WMI_SET_BITS((ptr)->dcc_stats, 0, 8, val) |
| #define WMI_CARRIER_SENSE_GET(ptr) WMI_GET_BITS((ptr)->dcc_stats, 8, 8) |
| #define WMI_CARRIER_SENSE_SET(ptr, val) WMI_SET_BITS((ptr)->dcc_stats, 8, 8, val) |
| #define WMI_NDL_CHANNEL_LOAD_GET(ptr) WMI_GET_BITS((ptr)->dcc_stats, 16, 11) |
| #define WMI_NDL_CHANNEL_LOAD_SET(ptr, val) WMI_SET_BITS((ptr)->dcc_stats, 16, 11, val) |
| #define WMI_NDL_PACKET_ARRIVAL_RATE_GET(ptr) WMI_GET_BITS((ptr)->packet_stats, 0, 14) |
| #define WMI_NDL_PACKET_ARRIVAL_RATE_SET(ptr, val) WMI_SET_BITS((ptr)->packet_stats, 0, 14, val) |
| #define WMI_NDL_PACKET_AVG_DURATION_GET(ptr) WMI_GET_BITS((ptr)->packet_stats, 14, 12) |
| #define WMI_NDL_PACKET_AVG_DURATION_SET(ptr, val) WMI_SET_BITS((ptr)->packet_stats, 14, 12, val) |
| #define WMI_NDL_CHANNEL_BUSY_TIME_GET(ptr) WMI_GET_BITS((ptr)->channel_busy_time, 0, 11) |
| #define WMI_NDL_CHANNEL_BUSY_TIME_SET(ptr, val) WMI_SET_BITS((ptr)->channel_busy_time, 0, 11, val) |
| |
| #define WMI_NDL_TX_PACKET_ARRIVAL_RATE_GET(ptr, acprio) wmi_packed_arr_get_bits((ptr)->tx_packet_arrival_rate_ac, acprio, SIZE_NDLTYPE_ARRIVALRATE) |
| #define WMI_NDL_TX_PACKET_ARRIVAL_RATE_SET(ptr, acprio, val) wmi_packed_arr_set_bits((ptr)->tx_packet_arrival_rate_ac, acprio, SIZE_NDLTYPE_ARRIVALRATE, val) |
| #define WMI_NDL_TX_PACKET_AVG_DURATION_GET(ptr, acprio) wmi_packed_arr_get_bits((ptr)->tx_packet_avg_duration_ac, acprio, SIZE_NDLTYPE_PACKETDURATION) |
| #define WMI_NDL_TX_PACKET_AVG_DURATION_SET(ptr, acprio, val) wmi_packed_arr_set_bits((ptr)->tx_packet_avg_duration_ac, acprio, SIZE_NDLTYPE_PACKETDURATION, val) |
| #define WMI_NDL_TX_CHANNEL_USE_GET(ptr, acprio) wmi_packed_arr_get_bits((ptr)->tx_channel_use_ac, acprio, SIZE_NDLTYPE_CHANNELUSE) |
| #define WMI_NDL_TX_CHANNEL_USE_SET(ptr, acprio, val) wmi_packed_arr_set_bits((ptr)->tx_channel_use_ac, acprio, SIZE_NDLTYPE_CHANNELUSE, val) |
| #define WMI_NDL_TX_SIGNAL_AVG_POWER_GET(ptr, acprio) wmi_packed_arr_get_bits((ptr)->tx_signal_avg_power_ac, acprio, SIZE_NDLTYPE_TXPOWER) |
| #define WMI_NDL_TX_SIGNAL_AVG_POWER_SET(ptr, acprio, val) wmi_packed_arr_set_bits((ptr)->tx_signal_avg_power_ac, acprio, SIZE_NDLTYPE_TXPOWER, val) |
| |
| /** Bitmap for DCC stats. */ |
| typedef enum { |
| DCC_STATS_DEMODULATION_MODEL = 1, |
| DCC_STATS_COMMUNICATION_RANGES = 2, |
| DCC_STATS_CHANNEL_LOAD_MEASURES = 4, |
| DCC_STATS_TRANSMIT_PACKET_STATS = 8, |
| DCC_STATS_TRANSMIT_MODEL_PARAMETER = 16, |
| DCC_STATS_ALL = 0xff, |
| } wmi_dcc_stats_bitmap; |
| |
| /** Data structure for getting the DCC stats. */ |
| typedef struct { |
| /** |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_dcc_get_stats_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /* VDEV identifier */ |
| A_UINT32 vdev_id; |
| /**The number of channels for which stats are being requested. */ |
| A_UINT32 num_channels; |
| /** This is followed by a TLV array of wmi_dcc_channel_stats_request. */ |
| } wmi_dcc_get_stats_cmd_fixed_param; |
| |
| typedef struct { |
| /** |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_dcc_channel_stats_request. |
| */ |
| A_UINT32 tlv_header; |
| /** The channel for which this applies. */ |
| A_UINT32 chan_freq; /* MHz units */ |
| /** The DCC stats being requested. */ |
| A_UINT32 dcc_stats_bitmap; |
| } wmi_dcc_channel_stats_request; |
| |
| /** Data structure for the response with the DCC stats. */ |
| typedef struct { |
| /** |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_dcc_get_stats_resp_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /* VDEV identifier */ |
| A_UINT32 vdev_id; |
| /** Number of channels in the response. */ |
| A_UINT32 num_channels; |
| /** This is followed by a TLV array of wmi_dcc_ndl_stats_per_channel. */ |
| } wmi_dcc_get_stats_resp_event_fixed_param; |
| |
| /** Data structure for clearing the DCC stats. */ |
| typedef struct { |
| /** |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_dcc_clear_stats_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /* VDEV identifier */ |
| A_UINT32 vdev_id; |
| A_UINT32 dcc_stats_bitmap; |
| } wmi_dcc_clear_stats_cmd_fixed_param; |
| |
| /** Data structure for the pushed DCC stats */ |
| typedef struct { |
| /** |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_dcc_stats_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /* VDEV identifier */ |
| A_UINT32 vdev_id; |
| /** The number of channels in the response. */ |
| A_UINT32 num_channels; |
| /** This is followed by a TLV array of wmi_dcc_ndl_stats_per_channel. */ |
| } wmi_dcc_stats_event_fixed_param; |
| |
| /** Data structure for updating NDL per channel. */ |
| typedef struct { |
| /** |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_dcc_ndl_chan |
| */ |
| A_UINT32 tlv_header; |
| /** |
| * Channel frequency, 16 bits |
| * NDL_numActiveState, ndlType_numberElements, 1+6 bits |
| */ |
| A_UINT32 chan_info; |
| /** |
| * NDL_minDccSampling, 10 bits. |
| * Maximum time interval between subsequent checks of the DCC rules. |
| */ |
| A_UINT32 ndl_min_dcc_sampling; |
| /** |
| * dcc_enable, 1 bit. |
| * dcc_stats_enable, 1 bit. |
| * dcc_stats_interval, 16 bits. |
| */ |
| A_UINT32 dcc_flags; |
| /** General DCC configuration. |
| * NDL_timeUp, ndlType_timing, 1+12 bits. |
| * NDL_timeDown, ndlType_timing, 1+12 bits. |
| */ |
| A_UINT32 general_config; |
| /** Transmit power thresholds. |
| * NDL_minTxPower, ndlType_txPower, 1+7 bits. |
| * NDL_maxTxPower, ndlType_txPower, 1+7 bits. |
| */ |
| /* see "ETSI TS 102 687" table above for units */ |
| A_UINT32 min_max_tx_power; |
| /** |
| * NDL_defTxPower(AC_BK), ndlType_txPower, 1+7 bits. |
| * NDL_defTxPower(AC_BE), ndlType_txPower, 1+7 bits. |
| * NDL_defTxPower(AC_VI), ndlType_txPower, 1+7 bits. |
| * NDL_defTxPower(AC_VO), ndlType_txPower, 1+7 bits. |
| */ |
| /* see "ETSI TS 102 687" table above for units */ |
| A_UINT32 def_tx_power_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_TXPOWER)]; |
| /** Packet timing thresholds. |
| * NDL_maxPacketDuration(AC_BK), ndlType_packetDuration, 1+11 bits. |
| * NDL_maxPacketDuration(AC_BE), ndlType_packetDuration, 1+11 bits. |
| * NDL_maxPacketDuration(AC_VI), ndlType_packetDuration, 1+11 bits. |
| * NDL_maxPacketDuration(AC_VO), ndlType_packetDuration, 1+11 bits. |
| */ |
| A_UINT32 max_packet_duration_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_PACKETDURATION)]; |
| /** |
| * NDL_minPacketInterval, ndlType_packetInterval, 1+10 bits. |
| * NDL_maxPacketInterval, ndlType_packetInterval, 1+10 bits. |
| */ |
| A_UINT32 min_max_packet_interval; |
| /** |
| * NDL_defPacketInterval(AC_BK), ndlType_packetInterval, 1+10 bits. |
| * NDL_defPacketInterval(AC_BE), ndlType_packetInterval, 1+10 bits. |
| * NDL_defPacketInterval(AC_VI), ndlType_packetInterval, 1+10 bits. |
| * NDL_defPacketInterval(AC_VO), ndlType_packetInterval, 1+10 bits |
| */ |
| A_UINT32 def_packet_interval_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_PACKETINTERVAL)]; |
| /** Packet datarate thresholds. |
| * NDL_minDatarate, ndlType_datarate, 1+3 bits. |
| * NDL_maxDatarate, ndlType_datarate, 1+3 bits. |
| */ |
| A_UINT32 min_max_datarate; |
| /** |
| * NDL_defDatarate(AC_BK), ndlType_datarate, 1+3 bits. |
| * NDL_defDatarate(AC_BE), ndlType_datarate, 1+3 bits. |
| * NDL_defDatarate(AC_VI), ndlType_datarate, 1+3 bits. |
| * NDL_defDatarate(AC_VO), ndlType_datarate, 1+3 bits. |
| */ |
| A_UINT32 def_datarate_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_DATARATE)]; |
| /** Receive signal thresholds. |
| * NDL_minCarrierSense, ndlType_rxPower, 1+7 bits. |
| * NDL_maxCarrierSense, ndlType_rxPower, 1+7 bits. |
| * NDL_defCarrierSense, ndlType_rxPower, 1+7 bits. |
| */ |
| A_UINT32 min_max_def_carrier_sense; |
| |
| /** Receive model parameter. |
| * NDL_defDccSensitivity, ndlType_rxPower, 1+7 bits. |
| * NDL_maxCsRange, ndlType_distance, 1+12 bits. |
| * NDL_refPathLoss, ndlType_pathloss, 1+5 bits. |
| */ |
| A_UINT32 receive_model_parameter; |
| |
| /** |
| * NDL_minSNR, ndlType_snr, 1+7 bits. |
| */ |
| A_UINT32 receive_model_parameter_2; |
| |
| /** Demodulation model parameters. |
| * NDL_snrBackoff(MCS0), ndlType_snr, 1+7 bits. |
| * NDL_snrBackoff(MCS1), ndlType_snr, 1+7 bits. |
| * NDL_snrBackoff(MCS2), ndlType_snr, 1+7 bits. |
| * NDL_snrBackoff(MCS3), ndlType_snr, 1+7 bits. |
| * NDL_snrBackoff(MCS4), ndlType_snr, 1+7 bits. |
| * NDL_snrBackoff(MCS5), ndlType_snr, 1+7 bits. |
| * NDL_snrBackoff(MCS6), ndlType_snr, 1+7 bits. |
| * NDL_snrBackoff(MCS7), ndlType_snr, 1+7 bits. |
| */ |
| A_UINT32 snr_backoff_mcs[WMI_PACKED_ARR_SIZE(MCS_COUNT, SIZE_NDLTYPE_SNR)]; |
| /** Transmit model parameters. |
| * NDL_tmPacketArrivalRate(AC_BK), ndlType_arrivalRate, 1+13 bits. |
| * NDL_tmPacketArrivalRate(AC_BE), ndlType_arrivalRate, 1+13 bits. |
| * NDL_tmPacketArrivalRate(AC_VI), ndlType_arrivalRate, 1+13 bits. |
| * NDL_tmPacketArrivalRate(AC_VO), ndlType_arrivalRate, 1+13 bits. |
| */ |
| A_UINT32 tm_packet_arrival_rate_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_ARRIVALRATE)]; |
| /** |
| * NDL_tmPacketAvgDuration(AC_BK), ndlType_packetDuration, 1+11 bits. |
| * NDL_tmPacketAvgDuration(AC_BE), ndlType_packetDuration, 1+11 bits. |
| * NDL_tmPacketAvgDuration(AC_VI), ndlType_packetDuration, 1+11 bits. |
| * NDL_tmPacketAvgDuration(AC_VO), ndlType_packetDuration, 1+11 bits. |
| */ |
| A_UINT32 tm_packet_avg_duration_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_PACKETDURATION)]; |
| /** |
| * NDL_tmSignalAvgPower(AC_BK), ndlType_txPower, 1+7 bits. |
| * NDL_tmSignalAvgPower(AC_BE), ndlType_txPower, 1+7 bits. |
| * NDL_tmSignalAvgPower(AC_VI), ndlType_txPower, 1+7 bits. |
| * NDL_tmSignalAvgPower(AC_VO), ndlType_txPower, 1+7 bits. |
| */ |
| A_UINT32 tm_signal_avg_power_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_TXPOWER)]; |
| /* NDL_tmMaxChannelUse, ndlType_channelUse, 1+13 bits. */ |
| A_UINT32 tm_max_channel_use; |
| /** |
| * NDL_tmChannelUse(AC_BK), ndlType_channelUse, 1+13 bits. |
| * NDL_tmChannelUse(AC_BE), ndlType_channelUse, 1+13 bits. |
| * NDL_tmChannelUse(AC_VI), ndlType_channelUse, 1+13 bits. |
| * NDL_tmChannelUse(AC_VO), ndlType_channelUse, 1+13 bits. |
| */ |
| A_UINT32 tm_channel_use_ac[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_CHANNELUSE)]; |
| /** Channel load thresholds. |
| * NDL_minChannelLoad, ndlType_channelLoad, 1+10 bits. |
| * NDL_maxChannelLoad, ndlType_channelLoad, 1+10 bits. |
| */ |
| A_UINT32 min_max_channel_load; |
| /** Transmit queue parameters. |
| * NDL_numQueue, ndlType_acPrio, 1+3 bits. |
| * NDL_refQueueStatus(AC_BK), ndlType_queueStatus, 1+1 bit. |
| * NDL_refQueueStatus(AC_BE), ndlType_queueStatus, 1+1 bit. |
| * NDL_refQueueStatus(AC_VI), ndlType_queueStatus, 1+1 bit. |
| * NDL_refQueueStatus(AC_VO), ndlType_queueStatus, 1+1 bit. |
| */ |
| A_UINT32 transmit_queue_parameters; |
| /** |
| * NDL_refQueueLen(AC_BK), ndlType_numberElements, 1+6 bits. |
| * NDL_refQueueLen(AC_BE), ndlType_numberElements, 1+6 bits. |
| * NDL_refQueueLen(AC_VI), ndlType_numberElements, 1+6 bits. |
| * NDL_refQueueLen(AC_VO), ndlType_numberElements, 1+6 bits. |
| */ |
| A_UINT32 numberElements[WMI_PACKED_ARR_SIZE(WLAN_MAX_AC, SIZE_NDLTYPE_NUMBERELEMENTS)]; |
| } wmi_dcc_ndl_chan; |
| |
| #define WMI_CHAN_FREQ_GET(ptr) WMI_GET_BITS((ptr)->chan_info, 0, 16) |
| #define WMI_CHAN_FREQ_SET(ptr, val) WMI_SET_BITS((ptr)->chan_info, 0, 16, val) |
| #define WMI_NDL_NUM_ACTIVE_STATE_GET(ptr) WMI_GET_BITS((ptr)->chan_info, 16, 7) |
| #define WMI_NDL_NUM_ACTIVE_STATE_SET(ptr, val) WMI_SET_BITS((ptr)->chan_info, 16, 7, val) |
| |
| #define WMI_NDL_MIN_DCC_SAMPLING_GET(ptr) WMI_GET_BITS((ptr)->ndl_min_dcc_sampling, 0, 10) |
| #define WMI_NDL_MIN_DCC_SAMPLING_SET(ptr, val) WMI_SET_BITS((ptr)->ndl_min_dcc_sampling, 0, 10, val) |
| |
| #define WMI_NDL_MEASURE_INTERVAL_GET(ptr) WMI_GET_BITS((ptr)->ndl_min_dcc_sampling, 10, 16) |
| #define WMI_NDL_MEASURE_INTERVAL_SET(ptr, val) WMI_SET_BITS((ptr)->ndl_min_dcc_sampling, 10, 16, val) |
| |
| |
| #define WMI_NDL_DCC_ENABLE_GET(ptr) WMI_GET_BITS((ptr)->dcc_flags, 0, 1) |
| #define WMI_NDL_DCC_ENABLE_SET(ptr, val) WMI_SET_BITS((ptr)->dcc_flags, 0, 1, val) |
| #define WMI_NDL_DCC_STATS_ENABLE_GET(ptr) WMI_GET_BITS((ptr)->dcc_flags, 1, 1) |
| #define WMI_NDL_DCC_STATS_ENABLE_SET(ptr, val) WMI_SET_BITS((ptr)->dcc_flags, 1, 1, val) |
| #define WMI_NDL_DCC_STATS_INTERVAL_GET(ptr) WMI_GET_BITS((ptr)->dcc_flags, 2, 16) |
| #define WMI_NDL_DCC_STATS_INTERVAL_SET(ptr, val) WMI_SET_BITS((ptr)->dcc_flags, 2, 16, val) |
| |
| #define WMI_NDL_TIME_UP_GET(ptr) WMI_GET_BITS((ptr)->general_config, 0, 13) |
| #define WMI_NDL_TIME_UP_SET(ptr, val) WMI_SET_BITS((ptr)->general_config, 0, 13, val) |
| #define WMI_NDL_TIME_DOWN_GET(ptr) WMI_GET_BITS((ptr)->general_config, 13, 13) |
| #define WMI_NDL_TIME_DOWN_SET(ptr, val) WMI_SET_BITS((ptr)->general_config, 13, 13, val) |
| |
| #define WMI_NDL_MIN_TX_POWER_GET(ptr) WMI_GET_BITS((ptr)->min_max_tx_power, 0, 8) |
| #define WMI_NDL_MIN_TX_POWER_SET(ptr, val) WMI_SET_BITS((ptr)->min_max_tx_power, 0, 8, val) |
| #define WMI_NDL_MAX_TX_POWER_GET(ptr) WMI_GET_BITS((ptr)->min_max_tx_power, 8, 8) |
| #define WMI_NDL_MAX_TX_POWER_SET(ptr, val) WMI_SET_BITS((ptr)->min_max_tx_power, 8, 8, val) |
| |
| #define WMI_NDL_DEF_TX_POWER_GET(ptr, acprio) wmi_packed_arr_get_bits((ptr)->def_tx_power_ac, acprio, SIZE_NDLTYPE_TXPOWER) |
| #define WMI_NDL_DEF_TX_POWER_SET(ptr, acprio, val) wmi_packed_arr_set_bits((ptr)->def_tx_power_ac, acprio, SIZE_NDLTYPE_TXPOWER, val) |
| |
| #define WMI_NDL_MAX_PACKET_DURATION_GET(ptr, acprio) wmi_packed_arr_get_bits((ptr)->max_packet_duration_ac, acprio, SIZE_NDLTYPE_PACKETDURATION) |
| #define WMI_NDL_MAX_PACKET_DURATION_SET(ptr, acprio, val) wmi_packed_arr_set_bits((ptr)->max_packet_duration_ac, acprio, SIZE_NDLTYPE_PACKETDURATION, val) |
| #define WMI_NDL_MIN_PACKET_INTERVAL_GET(ptr) WMI_GET_BITS((ptr)->min_max_packet_interval, 0, 11) |
| #define WMI_NDL_MIN_PACKET_INTERVAL_SET(ptr, val) WMI_SET_BITS((ptr)->min_max_packet_interval, 0, 11, val) |
| #define WMI_NDL_MAX_PACKET_INTERVAL_GET(ptr) WMI_GET_BITS((ptr)->min_max_packet_interval, 11, 11) |
| #define WMI_NDL_MAX_PACKET_INTERVAL_SET(ptr, val) WMI_SET_BITS((ptr)->min_max_packet_interval, 11, 11, val) |
| #define WMI_NDL_DEF_PACKET_INTERVAL_GET(ptr, acprio) wmi_packed_arr_get_bits((ptr)->def_packet_interval_ac, acprio, SIZE_NDLTYPE_PACKETINTERVAL) |
| #define WMI_NDL_DEF_PACKET_INTERVAL_SET(ptr, acprio, val) wmi_packed_arr_set_bits((ptr)->def_packet_interval_ac, acprio, SIZE_NDLTYPE_PACKETINTERVAL, val) |
| |
| #define WMI_NDL_MIN_DATARATE_GET(ptr) WMI_GET_BITS((ptr)->min_max_datarate, 0, 4) |
| #define WMI_NDL_MIN_DATARATE_SET(ptr, val) WMI_SET_BITS((ptr)->min_max_datarate, 0, 4, val) |
| #define WMI_NDL_MAX_DATARATE_GET(ptr) WMI_GET_BITS((ptr)->min_max_datarate, 4, 4) |
| #define WMI_NDL_MAX_DATARATE_SET(ptr, val) WMI_SET_BITS((ptr)->min_max_datarate, 4, 4, val) |
| #define WMI_NDL_DEF_DATARATE_GET(ptr, acprio) wmi_packed_arr_get_bits((ptr)->def_datarate_ac, acprio, SIZE_NDLTYPE_DATARATE) |
| #define WMI_NDL_DEF_DATARATE_SET(ptr, acprio, val) wmi_packed_arr_set_bits((ptr)->def_datarate_ac, acprio, SIZE_NDLTYPE_DATARATE, val) |
| |
| #define WMI_NDL_MIN_CARRIER_SENSE_GET(ptr) WMI_GET_BITS((ptr)->min_max_def_carrier_sense, 0, 8) |
| #define WMI_NDL_MIN_CARRIER_SENSE_SET(ptr, val) WMI_SET_BITS((ptr)->min_max_def_carrier_sense, 0, 8, val) |
| #define WMI_NDL_MAX_CARRIER_SENSE_GET(ptr) WMI_GET_BITS((ptr)->min_max_def_carrier_sense, 8, 8) |
| #define WMI_NDL_MAX_CARRIER_SENSE_SET(ptr, val) WMI_SET_BITS((ptr)->min_max_def_carrier_sense, 8, 8, val) |
| #define WMI_NDL_DEF_CARRIER_SENSE_GET(ptr) WMI_GET_BITS((ptr)->min_max_def_carrier_sense, 16, 8) |
| #define WMI_NDL_DEF_CARRIER_SENSE_SET(ptr, val) WMI_SET_BITS((ptr)->min_max_def_carrier_sense, 16, 8, val) |
| |
| #define WMI_NDL_DEF_DCC_SENSITIVITY_GET(ptr) WMI_GET_BITS((ptr)->receive_model_parameter, 0, 8) |
| #define WMI_NDL_DEF_DCC_SENSITIVITY_SET(ptr, val) WMI_SET_BITS((ptr)->receive_model_parameter, 0, 8, val) |
| #define WMI_NDL_MAX_CS_RANGE_GET(ptr) WMI_GET_BITS((ptr)->receive_model_parameter, 8, 13) |
| #define WMI_NDL_MAX_CS_RANGE_SET(ptr, val) WMI_SET_BITS((ptr)->receive_model_parameter, 8, 13, val) |
| #define WMI_NDL_REF_PATH_LOSS_GET(ptr) WMI_GET_BITS((ptr)->receive_model_parameter, 21, 6) |
| #define WMI_NDL_REF_PATH_LOSS_SET(ptr, val) WMI_SET_BITS((ptr)->receive_model_parameter, 21, 6, val) |
| |
| #define WMI_NDL_MIN_SNR_GET(ptr) WMI_GET_BITS((ptr)->receive_model_parameter_2, 0, 8) |
| #define WMI_NDL_MIN_SNR_SET(ptr, val) WMI_SET_BITS((ptr)->receive_model_parameter_2, 0, 8, val) |
| |
| #define WMI_NDL_SNR_BACKOFF_GET(ptr, mcs) wmi_packed_arr_get_bits((ptr)->snr_backoff_mcs, mcs, SIZE_NDLTYPE_SNR) |
| #define WMI_NDL_SNR_BACKOFF_SET(ptr, mcs, val) wmi_packed_arr_set_bits((ptr)->snr_backoff_mcs, mcs, SIZE_NDLTYPE_SNR, val) |
| |
| #define WMI_NDL_TM_PACKET_ARRIVAL_RATE_GET(ptr, acprio) wmi_packed_arr_get_bits((ptr)->tm_packet_arrival_rate_ac, acprio, SIZE_NDLTYPE_ARRIVALRATE) |
| #define WMI_NDL_TM_PACKET_ARRIVAL_RATE_SET(ptr, acprio, val) wmi_packed_arr_set_bits((ptr)->tm_packet_arrival_rate_ac, acprio, SIZE_NDLTYPE_ARRIVALRATE, val) |
| #define WMI_NDL_TM_PACKET_AVG_DURATION_GET(ptr, acprio) wmi_packed_arr_get_bits((ptr)->tm_packet_avg_duration_ac, acprio, SIZE_NDLTYPE_PACKETDURATION) |
| #define WMI_NDL_TM_PACKET_AVG_DURATION_SET(ptr, acprio, val) wmi_packed_arr_set_bits((ptr)->tm_packet_avg_duration_ac, acprio, SIZE_NDLTYPE_PACKETDURATION, val) |
| #define WMI_NDL_TM_SIGNAL_AVG_POWER_GET(ptr, acprio) wmi_packed_arr_get_bits((ptr)->tm_signal_avg_power_ac, acprio, SIZE_NDLTYPE_TXPOWER) |
| #define WMI_NDL_TM_SIGNAL_AVG_POWER_SET(ptr, acprio, val) wmi_packed_arr_set_bits((ptr)->tm_signal_avg_power_ac, acprio, SIZE_NDLTYPE_TXPOWER, val) |
| #define WMI_NDL_TM_MAX_CHANNEL_USE_GET(ptr) WMI_GET_BITS((ptr)->tm_max_channel_use, 0, 14) |
| #define WMI_NDL_TM_MAX_CHANNEL_USE_SET(ptr, val) WMI_SET_BITS((ptr)->tm_max_channel_use, 0, 14, val) |
| #define WMI_NDL_TM_CHANNEL_USE_GET(ptr, acprio) wmi_packed_arr_get_bits((ptr)->tm_channel_use_ac, acprio, SIZE_NDLTYPE_CHANNELUSE) |
| #define WMI_NDL_TM_CHANNEL_USE_SET(ptr, acprio, val) wmi_packed_arr_set_bits((ptr)->tm_channel_use_ac, acprio, SIZE_NDLTYPE_CHANNELUSE, val) |
| |
| #define WMI_NDL_MIN_CHANNEL_LOAD_GET(ptr) WMI_GET_BITS((ptr)->min_max_channel_load, 0, 11) |
| #define WMI_NDL_MIN_CHANNEL_LOAD_SET(ptr, val) WMI_SET_BITS((ptr)->min_max_channel_load, 0, 11, val) |
| #define WMI_NDL_MAX_CHANNEL_LOAD_GET(ptr) WMI_GET_BITS((ptr)->min_max_channel_load, 11, 11) |
| #define WMI_NDL_MAX_CHANNEL_LOAD_SET(ptr, val) WMI_SET_BITS((ptr)->min_max_channel_load, 11, 11, val) |
| |
| #define WMI_NDL_NUM_QUEUE_GET(ptr) WMI_GET_BITS((ptr)->transmit_queue_parameters, 0, 4) |
| #define WMI_NDL_NUM_QUEUE_SET(ptr, val) WMI_SET_BITS((ptr)->transmit_queue_parameters, 0, 4, val) |
| #define WMI_NDL_REF_QUEUE_STATUS_GET(ptr, acprio) WMI_GET_BITS((ptr)->transmit_queue_parameters, (4 + (acprio * 2)), 2) |
| #define WMI_NDL_REF_QUEUE_STATUS_SET(ptr, acprio, val) WMI_SET_BITS((ptr)->transmit_queue_parameters, (4 + (acprio * 2)), 2, val) |
| #define WMI_NDL_REF_QUEUE_LEN_GET(ptr, acprio) wmi_packed_arr_get_bits((ptr)->numberElements, acprio, SIZE_NDLTYPE_NUMBERELEMENTS) |
| #define WMI_NDL_REF_QUEUE_LEN_SET(ptr, acprio, val) wmi_packed_arr_set_bits((ptr)->numberElements, acprio, SIZE_NDLTYPE_NUMBERELEMENTS, val) |
| |
| /** Data structure for updating the NDL. */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_dcc_update_ndl_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /* VDEV identifier */ |
| A_UINT32 vdev_id; |
| /** The number of channels in the request. */ |
| A_UINT32 num_channel; |
| /** This is followed by a TLV array of wmi_dcc_ndl_chan. */ |
| /** This is followed by a TLV array of wmi_dcc_ndl_active_state_config. */ |
| } wmi_dcc_update_ndl_cmd_fixed_param; |
| |
| typedef struct { |
| /** |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_dcc_update_ndl_resp_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /* VDEV identifier */ |
| A_UINT32 vdev_id; |
| A_UINT32 status; |
| } wmi_dcc_update_ndl_resp_event_fixed_param; |
| |
| /* Actions for TSF timestamp */ |
| typedef enum { |
| TSF_TSTAMP_CAPTURE_REQ = 1, |
| TSF_TSTAMP_CAPTURE_RESET = 2, |
| TSF_TSTAMP_READ_VALUE = 3, |
| TSF_TSTAMP_QTIMER_CAPTURE_REQ = 4, |
| } wmi_tsf_tstamp_action; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_vdev_tsf_tstamp_action_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /* action type, refer to wmi_tsf_tstamp_action */ |
| A_UINT32 tsf_action; |
| /* low 32 bits of qtimer */ |
| A_UINT32 qtimer_low; |
| /* high 32 bits of qtimer */ |
| A_UINT32 qtimer_high; |
| } wmi_vdev_tsf_tstamp_action_cmd_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_vdev_tsf_report_event_fixed_param */ |
| A_UINT32 tlv_header; |
| /* VDEV identifier */ |
| A_UINT32 vdev_id; |
| /* low 32bit of tsf */ |
| A_UINT32 tsf_low; |
| /* high 32 bit of tsf */ |
| A_UINT32 tsf_high; |
| } wmi_vdev_tsf_report_event_fixed_param; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_vdev_set_ie_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /* unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; |
| /* unique id to identify the ie_data as defined by ieee 802.11 spec */ |
| A_UINT32 ie_id; |
| /* ie_len corresponds to num of bytes in ie_data[] */ |
| A_UINT32 ie_len; |
| /* |
| * Following this structure is the TLV byte stream of ie data of length |
| * buf_len: |
| * A_UINT8 ie_data[]; |
| */ |
| } wmi_vdev_set_ie_cmd_fixed_param; |
| |
| /* DEPRECATED - use wmi_pdev_set_pcl_cmd_fixed_param instead */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_soc_set_pcl_cmd_fixed_param |
| * Set Preferred Channel List |
| */ |
| A_UINT32 tlv_header; |
| |
| /* # of channels to scan */ |
| A_UINT32 num_chan; |
| /* |
| * TLV (tag length value ) parameters follow the wmi_soc_set_pcl_cmd |
| * structure. The TLV's are: |
| * A_UINT32 channel_list[]; |
| */ |
| } wmi_soc_set_pcl_cmd_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_set_pcl_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Set Preferred Channel List **/ |
| |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| |
| /** # of channels to scan */ |
| A_UINT32 num_chan; |
| /** |
| * TLV (tag length value ) parameters follow the wmi_soc_set_pcl_cmd |
| * structure. The TLV's are: |
| * A_UINT32 channel_weight[]; |
| * channel order & size will be as per the list provided |
| * in WMI_SCAN_CHAN_LIST_CMDID |
| **/ |
| } wmi_pdev_set_pcl_cmd_fixed_param; |
| |
| /* DEPRECATED - use wmi_pdev_set_hw_mode_cmd_fixed_param instead */ |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_soc_set_hw_mode_cmd_fixed_param |
| * Set Hardware Mode */ |
| A_UINT32 tlv_header; |
| |
| /* Hardware Mode Index */ |
| A_UINT32 hw_mode_index; |
| } wmi_soc_set_hw_mode_cmd_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_set_hw_mode_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Set Hardware Mode **/ |
| |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| |
| /* Hardware Mode Index */ |
| A_UINT32 hw_mode_index; |
| } wmi_pdev_set_hw_mode_cmd_fixed_param; |
| |
| /* DEPRECATED - use wmi_pdev_set_mac_config_cmd_fixed_param instead */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_soc_set_dual_mac_config_cmd_fixed_param |
| * Set Dual MAC Firmware Configuration |
| */ |
| A_UINT32 tlv_header; |
| |
| /* Concurrent scan configuration bits */ |
| A_UINT32 concurrent_scan_config_bits; |
| /* Firmware mode configuration bits */ |
| A_UINT32 fw_mode_config_bits; |
| } wmi_soc_set_dual_mac_config_cmd_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_set_mac_config_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Set Dual MAC Firmware Configuration **/ |
| |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| |
| /* Concurrent scan configuration bits */ |
| A_UINT32 concurrent_scan_config_bits; |
| /* Firmware mode configuration bits */ |
| A_UINT32 fw_mode_config_bits; |
| } wmi_pdev_set_mac_config_cmd_fixed_param; |
| |
| typedef struct { /* DEPRECATED */ |
| A_UINT32 num_tx_chains; |
| A_UINT32 num_rx_chains; |
| A_UINT32 reserved[2]; |
| } soc_num_tx_rx_chains; |
| |
| typedef struct { |
| A_UINT32 num_tx_chains_2g; |
| A_UINT32 num_rx_chains_2g; |
| A_UINT32 num_tx_chains_5g; |
| A_UINT32 num_rx_chains_5g; |
| } band_num_tx_rx_chains; |
| |
| typedef union { |
| soc_num_tx_rx_chains soc_txrx_chain_setting; |
| band_num_tx_rx_chains band_txrx_chain_setting; |
| } antenna_num_tx_rx_chains; |
| |
| typedef enum { |
| ANTENNA_MODE_DISABLED = 0x0, |
| ANTENNA_MODE_LOW_POWER_LOCATION_SCAN = 0x01, |
| /* reserved */ |
| } antenna_mode_reason; |
| |
| /* DEPRECATED - use wmi_pdev_set_antenna_mode_cmd_fixed_param instead */ |
| typedef struct { |
| /* |
| * TLV tag and len; |
| * tag equals WMITLV_TAG_STRUC_wmi_soc_set_antenna_mode_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| |
| /* the reason for setting antenna mode, refer antenna_mode_reason */ |
| A_UINT32 reason; |
| |
| /* |
| * The above reason parameter will select whether the following union |
| * is soc_num_tx_rx_chains or band_num_tx_rx_chains. |
| */ |
| antenna_num_tx_rx_chains num_txrx_chains_setting; |
| } wmi_soc_set_antenna_mode_cmd_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_set_antenna_mode_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| |
| /* Bits 0-15 is the number of RX chains and |
| * 16-31 is the number of TX chains |
| */ |
| A_UINT32 num_txrx_chains; |
| } wmi_pdev_set_antenna_mode_cmd_fixed_param; |
| |
| /** Data structure for information specific to a VDEV to MAC mapping. */ |
| /* DEPRECATED - use wmi_pdev_set_hw_mode_response_vdev_mac_entry instead */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_soc_set_hw_mode_response_vdev_mac_entry */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; /* VDEV ID */ |
| A_UINT32 mac_id; /* MAC ID */ |
| } wmi_soc_set_hw_mode_response_vdev_mac_entry; |
| |
| /** Data structure for information specific to a VDEV to MAC mapping. */ |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_set_hw_mode_response_vdev_mac_entry */ |
| A_UINT32 tlv_header; |
| |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| |
| A_UINT32 vdev_id; |
| } wmi_pdev_set_hw_mode_response_vdev_mac_entry; |
| |
| /* DEPRECATED - use wmi_pdev_set_hw_mode_response_event_fixed_param instead */ |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_soc_set_hw_mode_response_event_fixed_param |
| * Set Hardware Mode Response Event **/ |
| A_UINT32 tlv_header; |
| |
| /* Status of set_hw_mode command |
| * Values for Status: |
| * 0 - OK; command successful |
| * 1 - EINVAL; Requested invalid hw_mode |
| * 2 - ECANCELED; HW mode change canceled |
| * 3 - ENOTSUP; HW mode not supported |
| * 4 - EHARDWARE; HW mode change prevented by hardware |
| * 5 - EPENDING; HW mode change is pending |
| * 6 - ECOEX; HW mode change conflict with Coex |
| */ |
| A_UINT32 status; |
| /* Configured Hardware Mode */ |
| A_UINT32 cfgd_hw_mode_index; |
| /* Number of Vdev to Mac entries */ |
| A_UINT32 num_vdev_mac_entries; |
| /* |
| * TLV (tag length value ) parameters follow the soc_set_hw_mode_response_event |
| * structure. The TLV's are: |
| * A_UINT32 wmi_soc_set_hw_mode_response_vdev_mac_entry[]; |
| */ |
| } wmi_soc_set_hw_mode_response_event_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_set_hw_mode_response_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Set Hardware Mode Response Event **/ |
| |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| |
| /* Status of set_hw_mode command */ |
| /* |
| * Values for Status: |
| * 0 - OK; command successful |
| * 1 - EINVAL; Requested invalid hw_mode |
| * 2 - ECANCELED; HW mode change canceled |
| * 3 - ENOTSUP; HW mode not supported |
| * 4 - EHARDWARE; HW mode change prevented by hardware |
| * 5 - EPENDING; HW mode change is pending |
| * 6 - ECOEX; HW mode change conflict with Coex |
| */ |
| A_UINT32 status; |
| /* Configured Hardware Mode */ |
| A_UINT32 cfgd_hw_mode_index; |
| /* Number of Vdev to Mac entries */ |
| A_UINT32 num_vdev_mac_entries; |
| /** |
| * TLV (tag length value ) parameters follow the |
| * soc_set_hw_mode_response_event structure. The TLV's are: |
| * A_UINT32 wmi_soc_set_hw_mode_response_vdev_mac_entry[]; |
| */ |
| } wmi_pdev_set_hw_mode_response_event_fixed_param; |
| |
| /* DEPRECATED - use wmi_pdev_hw_mode_transition_event_fixed_param instead */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_soc_hw_mode_transition_event_fixed_param |
| * Hardware Mode Transition Event |
| */ |
| A_UINT32 tlv_header; |
| /* Original or old Hardware mode */ |
| A_UINT32 old_hw_mode_index; |
| /* New Hardware Mode */ |
| A_UINT32 new_hw_mode_index; |
| /* Number of Vdev to Mac entries */ |
| A_UINT32 num_vdev_mac_entries; |
| |
| /** |
| * TLV (tag length value ) parameters follow the soc_set_hw_mode_response_event |
| * structure. The TLV's are: |
| * A_UINT32 wmi_soc_set_hw_mode_response_vdev_mac_entry[]; |
| */ |
| } wmi_soc_hw_mode_transition_event_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_hw_mode_transition_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Hardware Mode Transition Event **/ |
| |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| |
| /* Original or old Hardware mode */ |
| A_UINT32 old_hw_mode_index; |
| /* New Hardware Mode */ |
| A_UINT32 new_hw_mode_index; |
| /* Number of Vdev to Mac entries */ |
| A_UINT32 num_vdev_mac_entries; |
| |
| /** |
| * TLV (tag length value ) parameters follow the |
| * soc_set_hw_mode_response_event structure. The TLV's are: |
| * A_UINT32 wmi_soc_set_hw_mode_response_vdev_mac_entry[]; |
| */ |
| } wmi_pdev_hw_mode_transition_event_fixed_param; |
| |
| /* DEPRECATED - use wmi_pdev_set_mac_config_response_event_fixed_param |
| * instead |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_soc_set_dual_mac_config_response_event_fixed_param |
| * Set Dual MAC Config Response Event |
| */ |
| A_UINT32 tlv_header; |
| |
| /* Status for set_dual_mac_config command */ |
| /* |
| * Values for Status: |
| * 0 - OK; command successful |
| * 1 - EINVAL; Requested invalid hw_mode |
| * 3 - ENOTSUP; HW mode not supported |
| * 4 - EHARDWARE; HW mode change prevented by hardware |
| * 6 - ECOEX; HW mode change conflict with Coex |
| */ |
| A_UINT32 status; |
| } wmi_soc_set_dual_mac_config_response_event_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_set_mac_config_response_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** Set Dual MAC Config Response Event **/ |
| |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| |
| /* Status for set_dual_mac_config command */ |
| /* |
| * Values for Status: |
| * 0 - OK; command successful |
| * 1 - EINVAL; Requested invalid hw_mode |
| * 3 - ENOTSUP; HW mode not supported |
| * 4 - EHARDWARE; HW mode change prevented by hardware |
| * 6 - ECOEX; HW mode change conflict with Coex |
| */ |
| A_UINT32 status; |
| } wmi_pdev_set_mac_config_response_event_fixed_param; |
| |
| typedef enum { |
| MAWC_MOTION_STATE_UNKNOWN, |
| MAWC_MOTION_STATE_STATIONARY, |
| MAWC_MOTION_STATE_WALK, |
| MAWC_MOTION_STATE_TRANSIT, |
| } MAWC_MOTION_STATE; |
| |
| typedef enum { |
| MAWC_SENSOR_STATUS_OK, |
| MAWC_SENSOR_STATUS_FAILED_TO_ENABLE, |
| MAWC_SENSOR_STATUS_SHUTDOWN, |
| } MAWC_SENSOR_STATUS; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_mawc_sensor_report_ind_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /** new motion state, MAWC_MOTION_STATE */ |
| A_UINT32 motion_state; |
| /** status code of sensor, MAWC_SENSOR_STATUS */ |
| A_UINT32 sensor_status; |
| } wmi_mawc_sensor_report_ind_cmd_fixed_param; |
| |
| /* MBO flag field definition */ |
| /* |
| * Bit 0: 0 - Allow to connect to both MBO and non-MBO AP |
| * 1 - Allow to connect to MBO AP only |
| * Bit 1-31 : reserved. |
| */ |
| #define WMI_ROAM_MBO_FLAG_MBO_ONLY_MODE (1<<0) |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_roam_set_mbo_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** vdev id */ |
| A_UINT32 vdev_id; |
| /** enable or disable MBO */ |
| A_UINT32 enable; |
| /** MBO flags, refer to definition of MBO flags*/ |
| A_UINT32 flags; |
| } wmi_roam_set_mbo_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_ARRAY_STRUC |
| */ |
| A_UINT32 tlv_header; |
| /** Current operating class number */ |
| A_UINT32 cur_op_class; |
| /* |
| * Country string of current reg domain, |
| * the expected value should be same as country str defined |
| * in country IE. |
| * 3 octets (COUNTRY_STR) + 1 octet (always 0) |
| * The ordering of this array must be maintained, |
| * even when a big-endian host's WMI messages undergo |
| * automatic byte reordering for conversion to the |
| * little-endian ordering required by the target. |
| * On big-endian hosts, this array may need to be byte-swapped |
| * by the host, so the subsequent automatic byte-swap |
| * will result in the correct final byte order. |
| * global operating class: set country_str[0]=0 |
| */ |
| A_UINT8 country_str[4]; |
| /** Supported operating class number in current regdomain */ |
| A_UINT32 supp_op_class_num; |
| /* The TLVs will follow. */ |
| /* A_UINT32 supp_op_class_list[] */ |
| } wmi_supported_operating_class_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_ARRAY_STRUC |
| */ |
| A_UINT32 tlv_header; |
| /** non preferred channel attribute length */ |
| A_UINT32 non_prefer_ch_attr_len; |
| /* The TLVs will follow. */ |
| /** A_UINT8 non_prefer_ch_attr[];*/ |
| } wmi_mbo_non_preferred_channel_report_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_mawc_enable_sensor_event_fixed_param */ |
| A_UINT32 tlv_header; |
| /* enable(1) or disable(0) */ |
| A_UINT32 enable; |
| } wmi_mawc_enable_sensor_event_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_extscan_configure_mawc_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /* Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /* enable(1) or disable(0) MAWC */ |
| A_UINT32 enable; |
| /* ratio of skipping suppressing scan, skip one out of x */ |
| A_UINT32 suppress_ratio; |
| } wmi_extscan_configure_mawc_cmd_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_nlo_configure_mawc_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /* Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /* enable(1) or disable(0) MAWC */ |
| A_UINT32 enable; |
| /* ratio of exponential backoff, next = current + current*ratio/100 */ |
| A_UINT32 exp_backoff_ratio; |
| /* initial scan interval(msec) */ |
| A_UINT32 init_scan_interval; |
| /* max scan interval(msec) */ |
| A_UINT32 max_scan_interval; |
| } wmi_nlo_configure_mawc_cmd_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_roam_configure_mawc_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /* Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /* enable(1) or disable(0) MAWC */ |
| A_UINT32 enable; |
| /* data traffic load (kBps) to register CMC */ |
| A_UINT32 traffic_load_threshold; |
| /* RSSI threshold (dBm) to scan for Best AP */ |
| A_UINT32 best_ap_rssi_threshold; |
| /* high RSSI threshold adjustment in Stationary to suppress scan */ |
| A_UINT32 rssi_stationary_high_adjust; |
| /* low RSSI threshold adjustment in Stationary to suppress scan */ |
| A_UINT32 rssi_stationary_low_adjust; |
| } wmi_roam_configure_mawc_cmd_fixed_param; |
| |
| #define WMI_PACKET_FILTER_COMPARE_DATA_LEN_DWORD 2 |
| #define WMI_PACKET_FILTER_MAX_CMP_PER_PACKET_FILTER 10 |
| |
| typedef enum { |
| PACKET_FILTER_TYPE_INVALID = 0, |
| PACKET_FILTER_TYPE_FILTER_PKT, |
| PACKET_FILTER_TYPE_RESERVE_PKT, /* not used */ |
| PACKET_FILTER_TYPE_MAX_ENUM_SIZE |
| } WMI_PACKET_FILTER_FILTER_TYPE; |
| |
| typedef enum { |
| PACKET_FILTER_PROTO_TYPE_INVALID = 0, |
| |
| /* L2 header */ |
| PACKET_FILTER_PROTO_TYPE_MAC, |
| PACKET_FILTER_PROTO_TYPE_SNAP, |
| |
| /* L3 header (EtherType) */ |
| PACKET_FILTER_PROTO_TYPE_IPV4, |
| PACKET_FILTER_PROTO_TYPE_IPV6, |
| |
| /* L4 header (IP protocol) */ |
| PACKET_FILTER_PROTO_TYPE_UDP, |
| PACKET_FILTER_PROTO_TYPE_TCP, |
| PACKET_FILTER_PROTO_TYPE_ICMPV6, |
| |
| PACKET_FILTER_PROTO_TYPE_MAX |
| } WMI_PACKET_FILTER_PROTO_TYPE; |
| |
| typedef enum { |
| PACKET_FILTER_CMP_TYPE_INVALID = 0, |
| PACKET_FILTER_CMP_TYPE_EQUAL, |
| PACKET_FILTER_CMP_TYPE_MASK_EQUAL, |
| PACKET_FILTER_CMP_TYPE_NOT_EQUAL, |
| PACKET_FILTER_CMP_TYPE_MASK_NOT_EQUAL, |
| PACKET_FILTER_CMP_TYPE_ADDRTYPE, |
| PACKET_FILTER_CMP_TYPE_MAX |
| } WMI_PACKET_FILTER_CMP_TYPE; |
| |
| typedef enum { |
| PACKET_FILTER_SET_INACTIVE = 0, |
| PACKET_FILTER_SET_ACTIVE |
| } WMI_PACKET_FILTER_ACTION; |
| |
| typedef enum { |
| PACKET_FILTER_SET_DISABLE = 0, |
| PACKET_FILTER_SET_ENABLE |
| } WMI_PACKET_FILTER_RUNTIME_ENABLE; |
| |
| typedef struct { |
| A_UINT32 proto_type; |
| A_UINT32 cmp_type; |
| A_UINT32 data_length; /* Length of the data to compare (units = bytes) */ |
| /* |
| * from start of the respective frame header ( |
| * units = bytes) |
| */ |
| A_UINT32 data_offset; |
| /* Data to compare, little-endian order */ |
| A_UINT32 compareData[WMI_PACKET_FILTER_COMPARE_DATA_LEN_DWORD]; |
| /* Mask to be applied on rcvd packet data before compare, little-endian order */ |
| A_UINT32 dataMask[WMI_PACKET_FILTER_COMPARE_DATA_LEN_DWORD]; |
| } WMI_PACKET_FILTER_PARAMS_TYPE; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 filter_id; |
| A_UINT32 filter_action; /* WMI_PACKET_FILTER_ACTION */ |
| A_UINT32 filter_type; |
| A_UINT32 num_params; /* how many entries in paramsData are valid */ |
| A_UINT32 coalesce_time; /* not currently used - fill with 0x0 */ |
| WMI_PACKET_FILTER_PARAMS_TYPE paramsData[WMI_PACKET_FILTER_MAX_CMP_PER_PACKET_FILTER]; |
| } WMI_PACKET_FILTER_CONFIG_CMD_fixed_param; |
| |
| /* enable / disable all filters within the specified vdev */ |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 enable; /* WMI_PACKET_FILTER_RUNTIME_ENABLE */ |
| } WMI_PACKET_FILTER_ENABLE_CMD_fixed_param; |
| |
| |
| #define WMI_LRO_INFO_TCP_FLAG_VALS_BITPOS 0 |
| #define WMI_LRO_INFO_TCP_FLAG_VALS_NUMBITS 9 |
| |
| #define WMI_LRO_INFO_TCP_FLAG_VALS_SET(tcp_flag_u32, tcp_flag_values) \ |
| WMI_SET_BITS(tcp_flag_u32, \ |
| WMI_LRO_INFO_TCP_FLAG_VALS_BITPOS, \ |
| WMI_LRO_INFO_TCP_FLAG_VALS_NUMBITS, \ |
| tcp_flag_values) |
| #define WMI_LRO_INFO_TCP_FLAG_VALS_GET(tcp_flag_u32) \ |
| WMI_GET_BITS(tcp_flag_u32, \ |
| WMI_LRO_INFO_TCP_FLAG_VALS_BITPOS, \ |
| WMI_LRO_INFO_TCP_FLAG_VALS_NUMBITS) |
| |
| #define WMI_LRO_INFO_TCP_FLAGS_MASK_BITPOS 9 |
| #define WMI_LRO_INFO_TCP_FLAGS_MASK_NUMBITS 9 |
| |
| #define WMI_LRO_INFO_TCP_FLAGS_MASK_SET(tcp_flag_u32, tcp_flags_mask) \ |
| WMI_SET_BITS(tcp_flag_u32, \ |
| WMI_LRO_INFO_TCP_FLAGS_MASK_BITPOS, \ |
| WMI_LRO_INFO_TCP_FLAGS_MASK_NUMBITS, \ |
| tcp_flags_mask) |
| #define WMI_LRO_INFO_TCP_FLAGS_MASK_GET(tcp_flag_u32) \ |
| WMI_GET_BITS(tcp_flag_u32, \ |
| WMI_LRO_INFO_TCP_FLAGS_MASK_BITPOS, \ |
| WMI_LRO_INFO_TCP_FLAGS_MASK_NUMBITS) |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| /** |
| * @brief lro_enable - indicates whether lro is enabled |
| * [0] LRO Enable |
| */ |
| A_UINT32 lro_enable; |
| /** |
| * @brief tcp_flag_u32 - mask of which TCP flags to check and |
| * values to check for |
| * [8:0] TCP flag values - If the TCP flags from the packet do not match |
| * the values in this field after masking with TCP flags mask |
| * below,LRO eligible will not be set |
| * [17:9] TCP flags mask - Mask field for comparing the TCP values |
| * provided above with the TCP flags field in the received packet |
| * Use WMI_LRO_INFO_TCP_FLAG_VALS and WMI_LRO_INFO_TCP_FLAGS_MASK |
| * macros to isolate the mask field and values field that are packed |
| * into this u32 "word". |
| */ |
| A_UINT32 tcp_flag_u32; |
| /** |
| * @brief toeplitz_hash_ipv4 - contains seed needed to compute |
| * the flow id 5-tuple toeplitz hash for IPv4 packets. Contains |
| * bytes 0 to 3 |
| * |
| * In this and all the below toeplitz_hash fields, the bytes are |
| * specified in little-endian order. For example: |
| * toeplitz_hash_ipv4_0_3 bits 7:0 holds seed byte 0 |
| * toeplitz_hash_ipv4_0_3 bits 15:8 holds seed byte 1 |
| * toeplitz_hash_ipv4_0_3 bits 23:16 holds seed byte 2 |
| * toeplitz_hash_ipv4_0_3 bits 31:24 holds seed byte 3 |
| */ |
| A_UINT32 toeplitz_hash_ipv4_0_3; |
| |
| /** |
| * @brief toeplitz_hash_ipv4 - contains seed needed to compute |
| * the flow id 5-tuple toeplitz hash for IPv4 packets. Contains |
| * bytes 4 to 7 |
| */ |
| A_UINT32 toeplitz_hash_ipv4_4_7; |
| |
| /** |
| * @brief toeplitz_hash_ipv4 - contains seed needed to compute |
| * the flow id 5-tuple toeplitz hash for IPv4 packets. Contains |
| * bytes 8 to 11 |
| */ |
| A_UINT32 toeplitz_hash_ipv4_8_11; |
| |
| /** |
| * @brief toeplitz_hash_ipv4 - contains seed needed to compute |
| * the flow id 5-tuple toeplitz hash for IPv4 packets. Contains |
| * bytes 12 to 15 |
| */ |
| A_UINT32 toeplitz_hash_ipv4_12_15; |
| |
| /** |
| * @brief toeplitz_hash_ipv4 - contains seed needed to compute |
| * the flow id 5-tuple toeplitz hash for IPv4 packets. Contains |
| * byte 16 |
| */ |
| A_UINT32 toeplitz_hash_ipv4_16; |
| |
| /** |
| * @brief toeplitz_hash_ipv6 - contains seed needed to compute |
| * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains |
| * bytes 0 to 3 |
| */ |
| A_UINT32 toeplitz_hash_ipv6_0_3; |
| |
| /** |
| * @brief toeplitz_hash_ipv6 - contains seed needed to compute |
| * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains |
| * bytes 4 to 7 |
| */ |
| A_UINT32 toeplitz_hash_ipv6_4_7; |
| |
| /** |
| * @brief toeplitz_hash_ipv6 - contains seed needed to compute |
| * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains |
| * bytes 8 to 11 |
| */ |
| A_UINT32 toeplitz_hash_ipv6_8_11; |
| |
| /** |
| * @brief toeplitz_hash_ipv6 - contains seed needed to compute |
| * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains |
| * bytes 12 to 15 |
| */ |
| A_UINT32 toeplitz_hash_ipv6_12_15; |
| |
| /** |
| * @brief toeplitz_hash_ipv6 - contains seed needed to compute |
| * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains |
| * bytes 16 to 19 |
| */ |
| A_UINT32 toeplitz_hash_ipv6_16_19; |
| |
| /** |
| * @brief toeplitz_hash_ipv6 - contains seed needed to compute |
| * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains |
| * bytes 20 to 22 |
| */ |
| A_UINT32 toeplitz_hash_ipv6_20_23; |
| |
| /** |
| * @brief toeplitz_hash_ipv6 - contains seed needed to compute |
| * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains |
| * bytes 24 to 27 |
| */ |
| A_UINT32 toeplitz_hash_ipv6_24_27; |
| |
| /** |
| * @brief toeplitz_hash_ipv6 - contains seed needed to compute |
| * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains |
| * bytes 28 to 31 |
| */ |
| A_UINT32 toeplitz_hash_ipv6_28_31; |
| |
| /** |
| * @brief toeplitz_hash_ipv6 - contains seed needed to compute |
| * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains |
| * bytes 32 to 35 |
| */ |
| A_UINT32 toeplitz_hash_ipv6_32_35; |
| |
| /** |
| * @brief toeplitz_hash_ipv6 - contains seed needed to compute |
| * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains |
| * bytes 36 to 39 |
| */ |
| A_UINT32 toeplitz_hash_ipv6_36_39; |
| |
| /** |
| * @brief toeplitz_hash_ipv6 - contains seed needed to compute |
| * the flow id 5-tuple toeplitz hash for IPv6 packets. Contains |
| * byte 40 |
| */ |
| A_UINT32 toeplitz_hash_ipv6_40; |
| } wmi_lro_info_cmd_fixed_param; |
| |
| /* |
| * This structure is used to set the pattern for WOW host wakeup pin pulse |
| * pattern confirguration. |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_transfer_data_to_flash_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /* flash offset to write, starting from 0 */ |
| A_UINT32 offset; |
| /* vaild data length in buffer, unit: byte */ |
| A_UINT32 length; |
| } wmi_transfer_data_to_flash_cmd_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_transfer_data_to_flash_complete_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /* Return status. 0 for success, non-zero otherwise */ |
| A_UINT32 status; |
| } wmi_transfer_data_to_flash_complete_event_fixed_param; |
| |
| typedef enum { |
| ENHANCED_MCAST_FILTER_DISABLED, |
| ENHANCED_MCAST_FILTER_ENABLED |
| } ENHANCED_MCAST_FILTER_CONFIG; |
| |
| /* |
| * Command to enable/disable filtering of multicast IP with unicast mac |
| */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_config_enhanced_mcast_filter_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /* Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /* 1 = enable 0 = disable (see ENHANCED_MCAST_FILTER_CONFIG) */ |
| A_UINT32 enable; |
| } wmi_config_enhanced_mcast_filter_cmd_fixed_param; |
| |
| /* |
| * This structure is used to report SMPS force mode set complete to host. |
| */ |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_sta_smps_force_mode_complete_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /* Unique id identifying the VDEV */ |
| A_UINT32 vdev_id; |
| /* Return status. 0 for success, non-zero otherwise */ |
| A_UINT32 status; |
| } wmi_sta_smps_force_mode_complete_event_fixed_param; |
| |
| /* |
| * This structure is used to report SCPC calibrated data to host. |
| */ |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_scpc_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /* number of BDF patches. Each patch contains offset, length and data */ |
| A_UINT32 num_patch; |
| /* This TLV is followed by another TLV of array of bytes |
| * A_UINT8 data[]; |
| * This data array contains, for example |
| * patch1 offset(byte3~0), patch1 data length(byte7~4), |
| * patch1 data(byte11~8) |
| * patch2 offset(byte15~12), patch2 data length(byte19~16), |
| * patch2 data(byte47~20) |
| */ |
| } wmi_scpc_event_fixed_param; |
| |
| /* bpf interface structure */ |
| typedef struct wmi_bpf_get_capability_cmd_s { |
| A_UINT32 tlv_header; |
| A_UINT32 reserved; /* reserved for future use - must be filled with 0x0 */ |
| } wmi_bpf_get_capability_cmd_fixed_param; |
| |
| typedef struct wmi_bpf_capability_info_evt_s { |
| A_UINT32 tlv_header; |
| A_UINT32 bpf_version; /* fw's implement version */ |
| A_UINT32 max_bpf_filters; /* max filters that fw supports */ |
| A_UINT32 max_bytes_for_bpf_inst; /* the maximum bytes that can be used as bpf instructions */ |
| } wmi_bpf_capability_info_evt_fixed_param; |
| |
| /* bit 0 of flags: report counters */ |
| #define WMI_BPF_GET_VDEV_STATS_FLAG_CTR_S 0 |
| #define WMI_BPF_GET_VDEV_STATS_FLAG_CTR_M 0x1 |
| typedef struct wmi_bpf_get_vdev_stats_cmd_s { |
| A_UINT32 tlv_header; |
| A_UINT32 flags; |
| A_UINT32 vdev_id; |
| } wmi_bpf_get_vdev_stats_cmd_fixed_param; |
| |
| typedef struct wmi_bpf_vdev_stats_info_evt_s { |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 num_filters; |
| A_UINT32 num_checked_pkts; |
| A_UINT32 num_dropped_pkts; |
| } wmi_bpf_vdev_stats_info_evt_fixed_param; |
| |
| typedef struct wmi_bpf_set_vdev_instructions_cmd_s { |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 filter_id; |
| A_UINT32 bpf_version; /* host bpf version */ |
| A_UINT32 total_length; |
| A_UINT32 current_offset; |
| A_UINT32 current_length; |
| /* |
| * The TLV follows: |
| * A_UINT8 buf_inst[]; //Variable length buffer for the instuctions |
| */ |
| } wmi_bpf_set_vdev_instructions_cmd_fixed_param; |
| |
| #define BPF_FILTER_ID_ALL 0xFFFFFFFF |
| typedef struct wmi_bpf_del_vdev_instructions_cmd_s { |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 filter_id; /* BPF_FILTER_ID_ALL means delete all */ |
| } wmi_bpf_del_vdev_instructions_cmd_fixed_param; |
| |
| #define AES_BLOCK_LEN 16 /* in bytes */ |
| #define FIPS_KEY_LENGTH_128 16 /* in bytes */ |
| #define FIPS_KEY_LENGTH_256 32 /* in bytes */ |
| #define FIPS_ENCRYPT_CMD 0 |
| #define FIPS_DECRYPT_CMD 1 |
| #define FIPS_ENGINE_AES_CTR 0 |
| #define FIPS_ENGINE_AES_MIC 1 |
| #define FIPS_ERROR_OPER_TIMEOUT 1 |
| |
| /* WMI_PDEV_FIPS_CMDID */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_fips_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| union { |
| /* OBSOLETE - will be removed once all refs are gone */ |
| A_UINT32 mac_id; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| }; |
| A_UINT32 fips_cmd; /* FIPS_ENCRYPT or FIPS_DECRYPT */ |
| /* FIPS_ENGINE_AES_CTR or FIPS_ENGINE_AES_MIC */ |
| A_UINT32 mode; |
| /* FIPS_KEY_LENGTH_128 or FIPS_KEY_LENGTH_256 (units = bytes) */ |
| A_UINT32 key_len; |
| A_UINT8 key[WMI_MAX_KEY_LEN]; /* Key */ |
| A_UINT32 data_len; /* data length */ |
| /* |
| * Following this structure is the TLV: |
| * A_UINT32 data[1]; - In Data (keep this in the end) |
| */ |
| } wmi_pdev_fips_cmd_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_smart_ant_enable_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| union { |
| /* OBSOLETE - will be removed once all refs are gone */ |
| A_UINT32 mac_id; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| }; |
| A_UINT32 enable; /* 1:enable, 0:disable */ |
| /* 1:GPIO parallel mode, 0:GPIO serial mode */ |
| A_UINT32 mode; |
| A_UINT32 rx_antenna; /* rx antenna */ |
| A_UINT32 tx_default_antenna; /* tx default antenna */ |
| /* |
| * Following this structure is the TLV: |
| * wmi_pdev_smart_ant_gpio_handle |
| */ |
| } wmi_pdev_smart_ant_enable_cmd_fixed_param; |
| |
| /** GPIO pins/function values to control antennas */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_smart_ant_gpio_handle |
| */ |
| A_UINT32 tlv_header; |
| /* For serial: index 0-strobe index 1-data, For Parallel: per stream */ |
| A_UINT32 gpio_pin; |
| A_UINT32 gpio_func; /* GPIO function values for Smart Antenna */ |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| } wmi_pdev_smart_ant_gpio_handle; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_smart_ant_set_rx_antenna_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| union { |
| /* OBSOLETE - will be removed once all refs are gone */ |
| A_UINT32 mac_id; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| }; |
| A_UINT32 rx_antenna; |
| } wmi_pdev_smart_ant_set_rx_antenna_cmd_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_peer_smart_ant_set_tx_antenna_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** unique id identifying the vdev, generated by the caller */ |
| A_UINT32 vdev_id; /* ID of the vdev this peer belongs to */ |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /* |
| * Following this structure is the TLV: |
| * wmi_peer_smart_ant_set_tx_antenna_series |
| */ |
| } wmi_peer_smart_ant_set_tx_antenna_cmd_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_peer_smart_ant_set_tx_antenna_series |
| */ |
| A_UINT32 tlv_header; |
| /* antenna array */ |
| A_UINT32 antenna_series; |
| } wmi_peer_smart_ant_set_tx_antenna_series; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_peer_smart_ant_set_train_antenna_param |
| */ |
| A_UINT32 tlv_header; |
| /* rate array */ |
| A_UINT32 train_rate_series; |
| /* antenna array */ |
| A_UINT32 train_antenna_series; |
| /* Rate flags */ |
| /* TODO: For future use? */ |
| A_UINT32 rc_flags; |
| } wmi_peer_smart_ant_set_train_antenna_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_peer_smart_ant_set_train_antenna_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** unique id identifying the VDEV, generated by the caller */ |
| A_UINT32 vdev_id; /* ID of the vdev this peer belongs to */ |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /* num packets; 0-stop training */ |
| A_UINT32 num_pkts; |
| /* |
| * Following this structure is the TLV: |
| * wmi_peer_smart_ant_set_train_antenna_param |
| */ |
| } wmi_peer_smart_ant_set_train_antenna_cmd_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_peer_smart_ant_set_node_config_ops_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** unique id identifying the vdev, generated by the caller */ |
| A_UINT32 vdev_id; /* ID of the vdev this peer belongs to */ |
| /** peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| /* command id*/ |
| A_UINT32 cmd_id; |
| /* number of arguments passed */ |
| A_UINT32 args_count; |
| /* |
| * Following this structure is the TLV: |
| * A_UINT32 args[]; // argument list |
| */ |
| } wmi_peer_smart_ant_set_node_config_ops_cmd_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_set_ant_ctrl_chain |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 antCtrlChain; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| } wmi_pdev_set_ant_ctrl_chain; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_set_ant_switch_tbl_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 mac_id; /* MAC ID */ |
| A_UINT32 antCtrlCommon1; |
| A_UINT32 antCtrlCommon2; |
| /* |
| * Following this structure is the TLV: |
| * wmi_pdev_set_ant_ctrl_chain |
| */ |
| } wmi_pdev_set_ant_switch_tbl_cmd_fixed_param; |
| |
| typedef struct { |
| /* TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_set_ctl_table_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| union { |
| /* OBSOLETE - will be removed once all refs are gone */ |
| A_UINT32 mac_id; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| }; |
| /** len of CTL info */ |
| A_UINT32 ctl_len; |
| /* ctl array (len adjusted to number of words) |
| * Following this structure is the TLV: |
| * A_UINT32 ctl_info[1]; |
| */ |
| } wmi_pdev_set_ctl_table_cmd_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_set_mimogain_table_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| union { |
| /* OBSOLETE - will be removed once all refs are gone */ |
| A_UINT32 mac_id; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| }; |
| A_UINT32 mimogain_info; /* see WMI_MIMOGAIN macros */ |
| /* |
| * Bit 7:0 len of array gain table |
| * Bit 8 bypass multi chain gain or not |
| */ |
| /* |
| * array gain table(s) (len adjusted to number of words). |
| * Following this structure is the TLV: |
| * A_UINT32 arraygain_tbl[1]; |
| */ |
| } wmi_pdev_set_mimogain_table_cmd_fixed_param; |
| |
| #define WMI_MIMOGAIN_ARRAY_GAIN_LEN_S 0 |
| #define WMI_MIMOGAIN_ARRAY_GAIN_LEN (0xff << WMI_MIMOGAIN_ARRAY_GAIN_LEN_S) |
| #define WMI_MIMOGAIN_ARRAY_GAIN_LEN_GET(x) WMI_F_MS(x, WMI_MIMOGAIN_ARRAY_GAIN_LEN) |
| #define WMI_MIMOGAIN_ARRAY_GAIN_LEN_SET(x, z) WMI_F_RMW(x, z, WMI_MIMOGAIN_ARRAY_GAIN_LEN) |
| |
| #define WMI_MIMOGAIN_MULTI_CHAIN_BYPASS_S 8 |
| #define WMI_MIMOGAIN_MULTI_CHAIN_BYPASS (0x1 << WMI_MIMOGAIN_MULTI_CHAIN_BYPASS_S) |
| #define WMI_MIMOGAIN_MULTI_CHAIN_BYPASS_GET(x) WMI_F_MS(x, WMI_MIMOGAIN_MULTI_CHAIN_BYPASS) |
| #define WMI_MIMOGAIN_MULTI_CHAIN_BYPASS_SET(x, z) WMI_F_RMW(x, z, WMI_MIMOGAIN_MULTI_CHAIN_BYPASS) |
| |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_fwtest_set_param_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** parameter id */ |
| A_UINT32 param_id; |
| /** parameter value */ |
| A_UINT32 param_value; |
| } wmi_fwtest_set_param_cmd_fixed_param; |
| |
| /* Expressed in 1 part in 1000 (permille) */ |
| #define WMI_ATF_DENOMINATION 1000 |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_atf_peer_info |
| */ |
| A_UINT32 tlv_header; |
| wmi_mac_addr peer_macaddr; |
| A_UINT32 atf_units; /* Based on 1 part in 1000 (per mille) */ |
| A_UINT32 atf_groupid; /* Group Id of the peers for ATF SSID grouping */ |
| /* Peer congestion threshold for future use */ |
| A_UINT32 atf_units_reserved; |
| } wmi_atf_peer_info; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_peer_atf_request_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 num_peers; |
| /* |
| * Following this structure is the TLV: |
| * struct wmi_atf_peer_info peer_info[1]; |
| */ |
| } wmi_peer_atf_request_fixed_param; |
| |
| /* Equal distribution of ATF air time within an VDEV. */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_vdev_atf_request_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| A_UINT32 peer_atf_units; /* Per peer ATF units (per mille). */ |
| } wmi_vdev_atf_request_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_get_ani_cck_config_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| /** parameter */ |
| A_UINT32 param; |
| } wmi_pdev_get_ani_cck_config_cmd_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_get_ani_ofdm_config_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| /** parameter */ |
| A_UINT32 param; |
| } wmi_pdev_get_ani_ofdm_config_cmd_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_WMI_QBOOST_CFG_CMD_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; /* ID of the vdev this peer belongs to */ |
| A_UINT32 qb_enable; |
| wmi_mac_addr peer_macaddr; |
| } WMI_QBOOST_CFG_CMD_fixed_param; |
| |
| #define WMI_INST_STATS_INVALID_RSSI 0 |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_inst_rssi_stats_resp_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 iRSSI; /* dBm above the noise floor */ |
| /* peer MAC address */ |
| wmi_mac_addr peer_macaddr; |
| A_UINT32 vdev_id; /* ID of the vdev this peer belongs to */ |
| } wmi_inst_rssi_stats_resp_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_peer_cck_ofdm_rate_info |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 ratecode_legacy; /* Rate code for CCK OFDM */ |
| } wmi_peer_cck_ofdm_rate_info; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_peer_mcs_rate_info |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 ratecode_20; /* Rate code for 20MHz BW */ |
| A_UINT32 ratecode_40; /* Rate code for 40MHz BW */ |
| A_UINT32 ratecode_80; /* Rate code for 80MHz BW */ |
| } wmi_peer_mcs_rate_info; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_peer_ratecode_list_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| wmi_mac_addr peer_macaddr; |
| A_UINT32 ratecount; /* Max Rate count for each mode */ |
| A_UINT32 vdev_id; /* ID of the vdev this peer belongs to */ |
| /* |
| * Following this structure are the TLV |
| * struct wmi_peer_cck_ofdm_rate_info; |
| * struct wmi_peer_mcs_rate_info; |
| */ |
| } wmi_peer_ratecode_list_event_fixed_param; |
| |
| typedef struct wmi_wds_addr_event { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_wds_addr_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 event_type[4]; |
| wmi_mac_addr peer_mac; |
| wmi_mac_addr dest_mac; |
| A_UINT32 vdev_id; /* ID of the vdev this peer belongs to */ |
| } wmi_wds_addr_event_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_peer_sta_ps_statechange_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| wmi_mac_addr peer_macaddr; |
| A_UINT32 peer_ps_state; |
| } wmi_peer_sta_ps_statechange_event_fixed_param; |
| |
| /* WMI_PDEV_FIPS_EVENTID */ |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_fips_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| union { |
| /* OBSOLETE - will be removed once all refs are gone */ |
| A_UINT32 mac_id; |
| /** pdev_id for identifying the MAC |
| * See macros starting with WMI_PDEV_ID_ for values. |
| */ |
| A_UINT32 pdev_id; |
| }; |
| /* Error status: 0 (no err), 1, or OPER_TIMEOUT */ |
| A_UINT32 error_status; |
| A_UINT32 data_len; /* Data length */ |
| /* |
| * Following this structure is the TLV: |
| * A_UINT32 data[1]; // Out Data (keep this in the end) |
| */ |
| } wmi_pdev_fips_event_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_channel_hopping_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 mac_id; /* MAC ID */ |
| /* Noise threshold iterations with high values */ |
| A_UINT32 noise_floor_report_iter; |
| /* Total noise threshold iterations */ |
| A_UINT32 noise_floor_total_iter; |
| } wmi_pdev_channel_hopping_event_fixed_param; |
| |
| enum { |
| WMI_PDEV_RESERVE_AST_ENTRY_OK, |
| WMI_PDEV_RESERVE_AST_ENTRY_HASH_COLLISION, |
| WMI_PDEV_RESERVE_AST_ENTRY_CROSSING_AXI_BOUNDARY, |
| }; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_get_tpc_cmd_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 mac_id; /* MAC ID */ |
| A_UINT32 rate_flags; |
| /** |
| * FLAG_ONE_CHAIN 0x001 - one chain mask |
| * FLAG_TWO_CHAIN 0x005 - two chain mask |
| * FLAG_THREE_CHAIN 0x007 - three chain mask |
| * FLAG_FOUR_CHAIN 0x00F - four chain mask |
| * FLAG_STBC 0x010 - STBC is set |
| * FLAG_40MHZ 0x020 |
| * FLAG_80MHZ 0x040 |
| * FLAG_160MHZ 0x080 |
| * FLAG_TXBF 0x0100 - Tx Bf enabled |
| * FLAG_RTSENA 0x0200 - RTS enabled |
| * FLAG_CTSENA 0x0400 - CTS enabled |
| * FLAG_LDPC 0x0800 - LDPC set |
| * FLAG_SERIES1 0x1000 - |
| * FLAG_SGI 0x2000 - Short gaurd interval |
| * FLAG_MU2 0x4000 - MU2 data |
| * FLAG_MU3 0x8000 - MU3 data |
| * */ |
| A_UINT32 nss; |
| /** |
| * NSS 0x0 - 0x3 |
| * */ |
| A_UINT32 preamble; |
| /** |
| * PREAM_OFDM - 0x0 |
| * PREAM_CCK - 0x1 |
| * PREAM_HT - 0x2 |
| * PREAM_VHT - 0x3 |
| * */ |
| A_UINT32 hw_rate; |
| /** |
| * *** HW_OFDM_RATE *** |
| * OFDM_48_MBPS - 0x0 |
| * OFDM_24_MBPS - 0x1 |
| * OFDM_12_MBPS - 0x2 |
| * OFDM_6_MBPS - 0x3 |
| * OFDM_54_MBPS - 0x4 |
| * OFDM_36_MBPS - 0x5 |
| * OFDM_18_MBPS - 0x6 |
| * OFDM_9_MBPS - 0x7 |
| * |
| * *** HW_CCK_RATE *** |
| * CCK_11_LONG_MBPS - 0x0 |
| * CCK_5_5_LONG_MBPS - 0x1 |
| * CCK_2_LONG_MBPS - 0x2 |
| * CCK_1_LONG_MBPS - 0x3 |
| * CCK_11_SHORT_MBPS - 0x4 |
| * CCK_5_5_SHORT_MBPS - 0x5 |
| * CCK_2_SHORT_MBPS - 0x6 |
| * |
| * *** HW_HT / VHT_RATE *** |
| * MCS 0x0 - 0x9 |
| * */ |
| } wmi_pdev_get_tpc_cmd_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_tpc_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 reserved0; /* for future need */ |
| /* |
| * Following this structure is the TLV: |
| * A_UINT32 tpc[1]; |
| */ |
| } wmi_pdev_tpc_event_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 mac_id; /* MAC ID */ |
| A_UINT32 nfdBr_len; |
| A_UINT32 nfdBm_len; |
| A_UINT32 freqNum_len; |
| /* |
| * Following this structure is the TLV: |
| * WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_nfdBr; |
| * WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_nfdBm; |
| * WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_freqNum; |
| */ |
| } wmi_pdev_nfcal_power_all_channels_event_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_nfdBr |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 nfdBr; |
| } wmi_pdev_nfcal_power_all_channels_nfdBr; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_nfdBm |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 nfdBm; |
| } wmi_pdev_nfcal_power_all_channels_nfdBm; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_pdev_nfcal_power_all_channels_freqNum |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 freqNum; |
| } wmi_pdev_nfcal_power_all_channels_freqNum; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ani_cck_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 cck_level; |
| } wmi_ani_cck_event_fixed_param; |
| |
| typedef struct { |
| /* |
| * TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ani_ofdm_event_fixed_param |
| */ |
| A_UINT32 tlv_header; |
| A_UINT32 ofdm_level; |
| } wmi_ani_ofdm_event_fixed_param; |
| |
| typedef enum wmi_coex_config_type { |
| /* config interval (arg1 BT, arg2 WLAN) for P2P + PAGE */ |
| WMI_COEX_CONFIG_PAGE_P2P_TDM = 1, |
| /* config interval (arg1 BT, arg2 WLAN) for STA + PAGE */ |
| WMI_COEX_CONFIG_PAGE_STA_TDM = 2, |
| /* config interval (arg1 BT, arg2 WLAN) for SAP + PAGE */ |
| WMI_COEX_CONFIG_PAGE_SAP_TDM = 3, |
| } WMI_COEX_CONFIG_TYPE; |
| |
| typedef struct { |
| A_UINT32 tlv_header; |
| A_UINT32 vdev_id; |
| /* wmi_coex_config_type enum */ |
| A_UINT32 config_type; |
| A_UINT32 config_arg1; |
| A_UINT32 config_arg2; |
| } WMI_COEX_CONFIG_CMD_fixed_param; |
| |
| /* ADD NEW DEFS HERE */ |
| |
| /***************************************************************************** |
| * The following structures are deprecated. DO NOT USE THEM! |
| */ |
| |
| /** Max number of channels in the schedule. */ |
| #define OCB_CHANNEL_MAX (5) |
| |
| /* NOTE: Make sure these data structures are identical to those 9235 |
| * defined in sirApi.h */ |
| |
| typedef struct { |
| /** Arbitration Inter-Frame Spacing. Range: 2-15 */ |
| A_UINT32 aifsn; |
| /** Contention Window minimum. Range: 1 - 10 */ |
| A_UINT32 cwmin; |
| /** Contention Window maximum. Range: 1 - 10 */ |
| A_UINT32 cwmax; |
| } wmi_qos_params_t; |
| |
| typedef struct { |
| /** Channel frequency in MHz */ |
| A_UINT32 chan_freq; |
| /** Channel duration in ms */ |
| A_UINT32 duration; |
| /** Start guard interval in ms */ |
| A_UINT32 start_guard_interval; |
| /** End guard interval in ms */ |
| A_UINT32 end_guard_interval; |
| /** Transmit power in dBm, range 0 - 23 */ |
| A_UINT32 tx_power; |
| /** Transmit datarate in Mbps */ |
| A_UINT32 tx_rate; |
| /** QoS parameters for each AC */ |
| wmi_qos_params_t qos_params[WLAN_MAX_AC]; |
| /** 1 to enable RX stats for this channel, 0 otherwise */ |
| A_UINT32 rx_stats; |
| } wmi_ocb_channel_t; |
| |
| typedef struct { |
| /** TLV tag and len; tag equals |
| * WMITLV_TAG_STRUC_wmi_ocb_set_sched_cmd_fixed_param */ |
| A_UINT32 tlv_header; |
| /* VDEV identifier */ |
| A_UINT32 vdev_id; |
| /** Number of valid channels in the channels array */ |
| A_UINT32 num_channels; |
| /** The array of channels */ |
| wmi_ocb_channel_t channels[OCB_CHANNEL_MAX]; |
| /** 1 to allow off-channel tx, 0 otherwise */ |
| A_UINT32 off_channel_tx; /* Not supported */ |
| } wmi_ocb_set_sched_cmd_fixed_param; |
| |
| typedef struct { |
| /** Return status. 0 for success, non-zero otherwise */ |
| A_UINT32 status; |
| } wmi_ocb_set_sched_event_fixed_param; |
| |
| /** |
| * END DEPRECATED |
| */ |
| #ifdef __cplusplus |
| } |
| #endif |
| #endif /*_WMI_UNIFIED_H_*/ |
| /**@}*/ |