qcacld-3.0: CL 1485676 - update fw common interface files
qcacld-2.0 to qcacld-3.0 propagation.
Add MAC phy, Hardware mode, soc mac hardware, soc hal reg capabilities.
Change-Id: I7ce118d5e9c4d762ef900dc4b9b0137a76e66091
CRs-Fixed: 865207
diff --git a/target/inc/wmi_unified.h b/target/inc/wmi_unified.h
index d2c5ea6..423359e 100644
--- a/target/inc/wmi_unified.h
+++ b/target/inc/wmi_unified.h
@@ -1477,6 +1477,8 @@
#define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */
#define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
#define WMI_HT_CAP_HT40_SGI 0x0800
+#define WMI_HT_CAP_RX_LDPC 0x1000 /* LDPC RX support */
+#define WMI_HT_CAP_TX_LDPC 0x2000 /* LDPC TX support */
/* These macros should be used when we wish to advertise STBC support for
* only 1SS or 2SS or 3SS. */
@@ -1489,7 +1491,9 @@
WMI_HT_CAP_HT40_SGI | \
WMI_HT_CAP_TX_STBC | \
WMI_HT_CAP_RX_STBC | \
- WMI_HT_CAP_LDPC)
+ WMI_HT_CAP_LDPC | \
+ WMI_HT_CAP_TX_LDPC | \
+ WMI_HT_CAP_RX_LDPC)
/* WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
field. The fields not defined here are not supported, or reserved.
@@ -1521,6 +1525,7 @@
#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23
#define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000
#define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000
+#define WMI_VHT_CAP_TX_LDPC 0x40000000
/* TEMPORARY:
* Preserve the incorrect old name as an alias for the correct new name
@@ -1547,6 +1552,7 @@
WMI_VHT_CAP_TX_STBC | \
WMI_VHT_CAP_RX_STBC_MASK | \
WMI_VHT_CAP_RX_LDPC | \
+ WMI_VHT_CAP_TX_LDPC | \
WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \
WMI_VHT_CAP_RX_FIXED_ANT | \
WMI_VHT_CAP_TX_FIXED_ANT)
@@ -15280,6 +15286,196 @@
**/
} wmi_pdev_wal_power_debug_cmd_fixed_param;
+typedef enum {
+ WLAN_2G_CAPABILITY = 0x1,
+ WLAN_5G_CAPABILITY = 0x2,
+} WLAN_BAND_CAPABILITY;
+
+#define WMI_SUPPORT_11B_GET(flags) WMI_GET_BITS(flags, 0, 1)
+#define WMI_SUPPORT_11B_SET(flags, value) WMI_SET_BITS(flags, 0, 1, value)
+
+#define WMI_SUPPORT_11G_GET(flags) WMI_GET_BITS(flags, 1, 1)
+#define WMI_SUPPORT_11G_SET(flags, value) WMI_SET_BITS(flags, 1, 1, value)
+
+#define WMI_SUPPORT_11A_GET(flags) WMI_GET_BITS(flags, 2, 1)
+#define WMI_SUPPORT_11A_SET(flags, value) WMI_SET_BITS(flags, 2, 1, value)
+
+#define WMI_SUPPORT_11N_GET(flags) WMI_GET_BITS(flags, 3, 1)
+#define WMI_SUPPORT_11N_SET(flags, value) WMI_SET_BITS(flags, 3, 1, value)
+
+#define WMI_SUPPORT_11AC_GET(flags) WMI_GET_BITS(flags, 4, 1)
+#define WMI_SUPPORT_11AC_SET(flags, value) WMI_SET_BITS(flags, 4, 1, value)
+
+#define WMI_SUPPORT_11AX_GET(flags) WMI_GET_BITS(flags, 5, 1)
+#define WMI_SUPPORT_11AX_SET(flags, value) WMI_SET_BITS(flags, 5, 1, value)
+
+typedef struct {
+ /*
+ * TLV tag and len; tag equals
+ * WMITLV_TAG_STRUC_WMI_MAC_PHY_CAPABILITIES
+ */
+ A_UINT32 tlv_header;
+ /*
+ * hw_mode_id - identify a particular set of HW characteristics, as
+ * specified by the subsequent fields. WMI_MAC_PHY_CAPABILITIES element
+ * must be mapped to its parent WMI_HW_MODE_CAPABILITIES element using
+ * hw_mode_id. No particular ordering of WMI_MAC_PHY_CAPABILITIES
+ * elements should be assumed, though in practice the elements may
+ * always be ordered by hw_mode_id
+ */
+ A_UINT32 hw_mode_id;
+ /*
+ * pdev_id starts with 1. pdev_id 1 => phy_id 0,
+ * pdev_id 2 => phy_id 1
+ */
+ A_UINT32 pdev_id;
+ /* phy id. Starts with 0 */
+ A_UINT32 phy_id;
+ /* supported modulations */
+ union {
+ A_UINT32 supports_11b:1,
+ supports_11g:1,
+ supports_11a:1,
+ supports_11n:1,
+ supports_11ac:1,
+ supports_11ax:1;
+ A_UINT32 supported_flags;
+ };
+ /* supported bands, enum WLAN_BAND_CAPABILITY */
+ A_UINT32 supported_bands;
+ /*
+ * ampdu density 0 for no restriction, 1 for 1/4 us, 2 for 1/2 us,
+ * 3 for 1 us,4 for 2 us, 5 for 4 us, 6 for 8 us,7 for 16 us
+ */
+ A_UINT32 ampdu_density;
+ /* max bw supported 2G, enum wmi_channel_width */
+ A_UINT32 max_bw_supported_2G;
+ /* WMI HT Capability, WMI_HT_CAP defines */
+ A_UINT32 ht_cap_info_2G;
+ /* VHT capability info field of 802.11ac, WMI_VHT_CAP defines */
+ A_UINT32 vht_cap_info_2G;
+ /*
+ * VHT Supported MCS Set field Rx/Tx same
+ * The max VHT-MCS for n SS subfield (where n = 1,...,8) is encoded as
+ * follows
+ * - 0 indicates support for VHT-MCS 0-7 for n spatial streams
+ * - 1 indicates support for VHT-MCS 0-8 for n spatial streams
+ * - 2 indicates support for VHT-MCS 0-9 for n spatial streams
+ * - 3 indicates that n spatial streams is not supported
+ */
+ A_UINT32 vht_supp_mcs_2G;
+ /* HE capability info field of 802.11ax, WMI_HE_CAP defines */
+ A_UINT32 he_cap_info_2G;
+ /* HE Supported MCS Set field Rx/Tx same */
+ A_UINT32 he_supp_mcs_2G;
+ /* Valid Transmit chain mask */
+ A_UINT32 tx_chain_mask_2G;
+ /* Valid Receive chain mask */
+ A_UINT32 rx_chain_mask_2G;
+ /* max bw supported 5G, enum wmi_channel_width */
+ A_UINT32 max_bw_supported_5G;
+ /* WMI HT Capability, WMI_HT_CAP defines */
+ A_UINT32 ht_cap_info_5G;
+ /* VHT capability info field of 802.11ac, WMI_VHT_CAP defines */
+ A_UINT32 vht_cap_info_5G;
+ /*
+ * VHT Supported MCS Set field Rx/Tx same
+ * The max VHT-MCS for n SS subfield (where n = 1,...,8) is encoded as
+ * follows
+ * - 0 indicates support for VHT-MCS 0-7 for n spatial streams
+ * - 1 indicates support for VHT-MCS 0-8 for n spatial streams
+ * - 2 indicates support for VHT-MCS 0-9 for n spatial streams
+ * - 3 indicates that n spatial streams is not supported
+ */
+ A_UINT32 vht_supp_mcs_5G;
+ /* HE capability info field of 802.11ax, WMI_HE_CAP defines */
+ A_UINT32 he_cap_info_5G;
+ /* HE Supported MCS Set field Rx/Tx same */
+ A_UINT32 he_supp_mcs_5G;
+ /* Valid Transmit chain mask */
+ A_UINT32 tx_chain_mask_5G;
+ /* Valid Receive chain mask */
+ A_UINT32 rx_chain_mask_5G;
+} WMI_MAC_PHY_CAPABILITIES;
+
+typedef struct {
+ /*
+ * TLV tag and len; tag equal
+ * WMITLV_TAG_STRUC_WMI_HW_MODE_CAPABILITIES
+ */
+ A_UINT32 tlv_header;
+ /*
+ * hw_mode_id - identify a particular set of HW characteristics,
+ * as specified by the subsequent fields
+ */
+ A_UINT32 hw_mode_id;
+ /* BIT0 represents phy_id 0, BIT1 represent phy_id 1 and so on */
+ A_UINT32 phy_id_map;
+ /*
+ * number of bits set in phy_id_map represents number of
+ * WMI_MAC_PHY_CAPABILITIES TLV's
+ * one for each active PHY for current HW mode
+ * identified by hw_mode_id. For example for
+ * DBS/SBS mode there will be 2
+ * WMI_MAC_PHY_CAPABILITIES TLVs and for
+ * single MAC modes it
+ * will be 1 WMI_MAC_PHY_CAPABILITIES
+ * TLVs
+ */
+} WMI_HW_MODE_CAPABILITIES;
+
+typedef struct {
+ /*
+ * TLV tag and len; tag equals
+ * WMITLV_TAG_STRUC_WMI_SOC_MAC_PHY_HW_MODE_CAPS
+ */
+ A_UINT32 tlv_header;
+ /* num HW modes */
+ A_UINT32 num_hw_modes;
+ /* num_hw_modes WMI_HW_MODE_CAPABILITIES TLV's */
+} WMI_SOC_MAC_PHY_HW_MODE_CAPS;
+
+/*Below are Reg caps per PHY. Please note PHY ID starts with 0.*/
+typedef struct {
+ /*
+ * TLV tag and len; tag equals
+ * WMITLV_TAG_STRUC_WMI_HAL_REG_CAPABILITIES_EXT
+ */
+ A_UINT32 tlv_header;
+ /* phy id */
+ A_UINT32 phy_id;
+ /* regdomain value specified in EEPROM */
+ A_UINT32 eeprom_reg_domain;
+ /* regdomain */
+ A_UINT32 eeprom_reg_domain_ext;
+ /*
+ * CAP1 capabilities bit map, see REGDMN_CAP1_
+ * defines
+ */
+ A_UINT32 regcap1;
+ /*
+ * REGDMN EEPROM CAP, see
+ * REGDMN_EEPROM_EEREGCAP_ defines
+ */
+ A_UINT32 regcap2;
+ /* REGDMN MODE, see REGDMN_MODE_ enum */
+ A_UINT32 wireless_modes;
+ A_UINT32 low_2ghz_chan;
+ A_UINT32 high_2ghz_chan;
+ A_UINT32 low_5ghz_chan;
+ A_UINT32 high_5ghz_chan;
+} WMI_HAL_REG_CAPABILITIES_EXT;
+
+typedef struct {
+ /*
+ * TLV tag and len; tag equals
+ * WMITLV_TAG_STRUC_WMI_SOC_HAL_REG_CAPABILITIES
+ */
+ A_UINT32 tlv_header;
+ /* num_phy WMI_HAL_REG_CAPABILITIES_EXT TLV's */
+ A_UINT32 num_phy;
+} WMI_SOC_HAL_REG_CAPABILITIES;
+
/* ADD NEW DEFS HERE */
/*****************************************************************************