| /* |
| * Copyright (c) 2012-2019 The Linux Foundation. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /** |
| * DOC: This file contains centralized definitions of converged configuration. |
| */ |
| |
| #ifndef __CFG_MLME_DFS_H |
| #define __CFG_MLME_DFS_H |
| |
| /* |
| * <ini> |
| * gsap_tx_leakage_threshold - sap tx leakage threshold |
| * @Min: 100 |
| * @Max: 1000 |
| * @Default: 310 |
| * |
| * customer can set this value from 100 to 1000 which means |
| * sap tx leakage threshold is -10db to -100db |
| * |
| * Related: none |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_SAP_TX_LEAKAGE_THRESHOLD CFG_INI_UINT( \ |
| "gsap_tx_leakage_threshold", \ |
| 100, \ |
| 1000, \ |
| 310, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "sap tx leakage threshold") |
| |
| /* |
| * <ini> |
| * gDFSradarMappingPriMultiplier - dfs pri multiplier |
| * @Min: 1 |
| * @Max: 10 |
| * @Default: 2 |
| * |
| * customer can set this value from 1 to 10 which means |
| * host could handle missing pulses while there is high |
| * channel loading, for example: 30% ETSI and 50% Japan W53 |
| * |
| * Related: none |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_DFS_RADAR_PRI_MULTIPLIER CFG_INI_UINT( \ |
| "gDFSradarMappingPriMultiplier", \ |
| 1, \ |
| 10, \ |
| 2, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "dfs pri multiplier") |
| |
| /* |
| * <ini> |
| * gDfsBeaconTxEnhanced - beacon tx enhanced |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * This ini is used to enhance dfs beacon tx |
| * |
| * Related: none |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_DFS_BEACON_TX_ENHANCED CFG_INI_BOOL( \ |
| "gDfsBeaconTxEnhanced", \ |
| 0, \ |
| "beacon tx enhanced") |
| |
| /* |
| * <ini> |
| * gPreferNonDfsChanOnRadar - During random channel selection prefer non dfs |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * During random channel selection prefer non dfs. |
| * |
| * Related: none |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_ENABLE_NON_DFS_CHAN_ON_RADAR CFG_INI_BOOL( \ |
| "gPreferNonDfsChanOnRadar", \ |
| 0, \ |
| "channel selection prefer non dfs") |
| |
| /* |
| * <ini> |
| * dfsPhyerrFilterOffload - Enable dfs phyerror filtering offload in FW |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * This ini is used to to enable dfs phyerror filtering offload to firmware |
| * Enabling it will cause basic phy error to be discarding in firmware. |
| * Related: NA. |
| * |
| * Supported Feature: DFS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_ENABLE_DFS_PHYERR_FILTEROFFLOAD CFG_INI_BOOL( \ |
| "dfsPhyerrFilterOffload", \ |
| 0, \ |
| "dfs phyerror filtering offload") |
| |
| /* |
| * <ini> |
| * gIgnoreCAC - Used to ignore CAC |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * This ini is used to set default CAC |
| * |
| * Related: None |
| * |
| * Supported Feature: DFS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_IGNORE_CAC CFG_INI_BOOL( \ |
| "gIgnoreCAC", \ |
| 0, \ |
| "ignore CAC on DFS channel") |
| |
| /* |
| * <ini> |
| * gDisableDFSChSwitch - Disable channel switch if radar is found |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * This ini is used to disable channel switch if radar is found |
| * on that channel. |
| * Related: NA. |
| * |
| * Supported Feature: DFS |
| * |
| * Usage: Internal |
| * |
| * </ini> |
| */ |
| #define CFG_DISABLE_DFS_CH_SWITCH CFG_INI_BOOL( \ |
| "gDisableDFSChSwitch", \ |
| 0, \ |
| "Disable channel switch on radar") |
| |
| /* |
| * <ini> |
| * gEnableDFSMasterCap - Enable DFS master capability |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * This ini is used to enable/disable the DFS master capability. |
| * Disabling it will cause driver to not advertise the spectrum |
| * management capability |
| * Related: NA. |
| * |
| * upported Feature: DFS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_ENABLE_DFS_MASTER_CAPABILITY CFG_INI_BOOL( \ |
| "gEnableDFSMasterCap", \ |
| 0, \ |
| "DFS master mode capability") |
| |
| /* |
| * <ini> |
| * gDisableDfsJapanW53 - Block W53 channels in random channel selection |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * This ini is used to block W53 Japan channel in random channel selection |
| * |
| * Related: none |
| * |
| * Supported Feature: DFS |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_DISABLE_DFS_JAPAN_W53 CFG_INI_BOOL( \ |
| "gDisableDfsJapanW53", \ |
| 0, \ |
| "Block W53 channels in random selection") |
| |
| #define CFG_DFS_ALL \ |
| CFG(CFG_IGNORE_CAC) \ |
| CFG(CFG_DISABLE_DFS_CH_SWITCH) \ |
| CFG(CFG_DFS_BEACON_TX_ENHANCED) \ |
| CFG(CFG_SAP_TX_LEAKAGE_THRESHOLD) \ |
| CFG(CFG_DFS_RADAR_PRI_MULTIPLIER) \ |
| CFG(CFG_ENABLE_NON_DFS_CHAN_ON_RADAR) \ |
| CFG(CFG_ENABLE_DFS_MASTER_CAPABILITY) \ |
| CFG(CFG_DISABLE_DFS_JAPAN_W53) \ |
| CFG(CFG_ENABLE_DFS_PHYERR_FILTEROFFLOAD) |
| |
| #endif /* __CFG_MLME_DFS_H */ |