qcacld-3.0: Add USB bus support (Kbuild)
Add kbuild specific changes for USB bus support.
Change-Id: Icc6e8378ba3cbfca8aeb54b5084840e621639582
CRs-Fixed: 1023663
diff --git a/Kbuild b/Kbuild
index e9909d1..b5dd1ed 100644
--- a/Kbuild
+++ b/Kbuild
@@ -234,6 +234,11 @@
CONFIG_HIF_PCI := 1
endif
+#Enable USB specific APIS
+ifeq ($(CONFIG_ROME_IF),usb)
+ CONFIG_HIF_USB := 1
+endif
+
#Enable pci read/write config functions
ifeq ($(CONFIG_ROME_IF),pci)
CONFIG_ATH_PCI := 1
@@ -243,10 +248,6 @@
CONFIG_HIF_SNOC:= 1
endif
-ifeq ($(CONFIG_ROME_IF),usb)
-#CONFIG_ATH_PCI := 1
-endif
-
ifneq ($(CONFIG_MOBILE_ROUTER), y)
#Enable IBSS support on CLD
CONFIG_QCA_IBSS_SUPPORT := 1
@@ -799,6 +800,7 @@
HIF_PCIE_DIR := $(HIF_DIR)/src/pcie
HIF_SNOC_DIR := $(HIF_DIR)/src/snoc
+HIF_USB_DIR := $(HIF_DIR)/src/usb
HIF_SDIO_DIR := $(HIF_DIR)/src/sdio
HIF_SDIO_NATIVE_DIR := $(HIF_SDIO_DIR)/native_sdio
@@ -819,6 +821,11 @@
HIF_INC += -I$(WLAN_COMMON_INC)/$(HIF_SNOC_DIR)
endif
+ifeq ($(CONFIG_HIF_USB), 1)
+HIF_INC += -I$(WLAN_COMMON_INC)/$(HIF_DISPATCHER_DIR)
+HIF_INC += -I$(WLAN_COMMON_INC)/$(HIF_USB_DIR)
+endif
+
ifeq ($(CONFIG_HIF_SDIO), 1)
HIF_INC += -I$(WLAN_COMMON_INC)/$(HIF_DISPATCHER_DIR)
HIF_INC += -I$(WLAN_COMMON_INC)/$(HIF_SDIO_DIR)
@@ -836,6 +843,11 @@
$(WLAN_COMMON_ROOT)/$(HIF_CE_DIR)/ce_tasklet.o \
$(WLAN_COMMON_ROOT)/$(HIF_DIR)/src/regtable.o
+HIF_USB_OBJS := $(WLAN_COMMON_ROOT)/$(HIF_USB_DIR)/usbdrv.o \
+ $(WLAN_COMMON_ROOT)/$(HIF_USB_DIR)/hif_usb.o \
+ $(WLAN_COMMON_ROOT)/$(HIF_USB_DIR)/if_usb.o \
+ $(WLAN_COMMON_ROOT)/$(HIF_USB_DIR)/regtable_usb.o
+
HIF_SDIO_OBJS := $(WLAN_COMMON_ROOT)/$(HIF_SDIO_DIR)/hif_sdio_send.o \
$(WLAN_COMMON_ROOT)/$(HIF_SDIO_DIR)/hif_bmi_reg_access.o \
$(WLAN_COMMON_ROOT)/$(HIF_SDIO_DIR)/hif_diag_reg_access.o \
@@ -879,6 +891,12 @@
HIF_OBJS += $(WLAN_COMMON_ROOT)/$(HIF_DISPATCHER_DIR)/multibus_sdio.o
endif
+ifeq ($(CONFIG_HIF_USB), 1)
+HIF_OBJS += $(HIF_USB_OBJS)
+HIF_OBJS += $(HIF_COMMON_OBJS)
+HIF_OBJS += $(WLAN_COMMON_ROOT)/$(HIF_DISPATCHER_DIR)/multibus_usb.o
+endif
+
############ WMA ############
WMA_DIR := core/wma
@@ -928,6 +946,9 @@
ifeq ($(CONFIG_CNSS_SDIO),y)
PLD_OBJS += $(PLD_SRC_DIR)/pld_sdio.o
endif
+ifeq ($(CONFIG_USB), y)
+PLD_OBJS += $(PLD_SRC_DIR)/pld_usb.o
+endif
TARGET_INC := -I$(WLAN_ROOT)/target/inc
@@ -1044,12 +1065,15 @@
-DWMI_INTERFACE_EVENT_LOGGING \
-DATH_SUPPORT_WAPI \
-DWLAN_FEATURE_LINK_LAYER_STATS \
- -DWLAN_LOGGING_SOCK_SVC_ENABLE \
-DFEATURE_WLAN_EXTSCAN \
-DWLAN_FEATURE_MBSSID \
-DCONFIG_160MHZ_SUPPORT \
-DCONFIG_MCL
+ifneq ($(CONFIG_HIF_USB), 1)
+CDEFINES += -DWLAN_LOGGING_SOCK_SVC_ENABLE
+endif
+
ifeq ($(CONFIG_CNSS), y)
ifeq ($(CONFIG_CNSS_SDIO), y)
CDEFINES += -DCONFIG_PLD_SDIO_CNSS
@@ -1169,7 +1193,6 @@
CDEFINES += -DCONFIG_ATH_PROCFS_DIAG_SUPPORT
CDEFINES += -DQCA_SUPPORT_OL_RX_REORDER_TIMEOUT
CDEFINES += -DCONFIG_ATH_PCIE_MAX_PERF=0 -DCONFIG_ATH_PCIE_AWAKE_WHILE_DRIVER_LOAD=0 -DCONFIG_DISABLE_CDC_MAX_PERF_WAR=0
-CDEFINES += -DQCA_TX_HTT2_SUPPORT
endif
ifeq ($(CONFIG_WLAN_FEATURE_11W),y)
@@ -1263,8 +1286,8 @@
#Enable USB specific APIS
ifeq ($(CONFIG_HIF_USB), 1)
-CDEFINES += -DHIF_USB
-CDEFINES += -DCONFIG_HL_SUPPORT
+CDEFINES += -DHIF_USB \
+ -DCONFIG_HL_SUPPORT
endif
#Enable FW logs through ini