| /* |
| * Copyright (c) 2013-2017 The Linux Foundation. All rights reserved. |
| * |
| * Previously licensed under the ISC license by Qualcomm Atheros, Inc. |
| * |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /* |
| * This file was originally distributed by Qualcomm Atheros, Inc. |
| * under proprietary terms before Copyright ownership was assigned |
| * to the Linux Foundation. |
| */ |
| |
| /** |
| * DOC: wma_features.c |
| * This file contains different features related functions like WoW, |
| * Offloads, TDLS etc. |
| */ |
| |
| /* Header files */ |
| |
| #include "cds_ieee80211_common.h" /* ieee80211_frame */ |
| #include "wma.h" |
| #include "wma_api.h" |
| #include "cds_api.h" |
| #include "wmi_unified_api.h" |
| #include "wlan_qct_sys.h" |
| #include "wni_api.h" |
| #include "ani_global.h" |
| #include "wmi_unified.h" |
| #include "wni_cfg.h" |
| #include "cfg_api.h" |
| #include <cdp_txrx_tx_delay.h> |
| #include <cdp_txrx_peer_ops.h> |
| |
| #include "qdf_nbuf.h" |
| #include "qdf_types.h" |
| #include "qdf_mem.h" |
| #include "qdf_util.h" |
| |
| #include "wma_types.h" |
| #include "lim_api.h" |
| #include "lim_session_utils.h" |
| |
| #include "cds_utils.h" |
| |
| #if !defined(REMOVE_PKT_LOG) |
| #include "pktlog_ac.h" |
| #endif /* REMOVE_PKT_LOG */ |
| |
| #include "dbglog_host.h" |
| #include "csr_api.h" |
| #include "ol_fw.h" |
| |
| #include "wma_internal.h" |
| #include "wma_nan_datapath.h" |
| #include <cdp_txrx_handle.h> |
| #include "wlan_pmo_ucfg_api.h" |
| #include <target_if_scan.h> |
| #include "wlan_reg_services_api.h" |
| |
| #ifndef ARRAY_LENGTH |
| #define ARRAY_LENGTH(a) (sizeof(a) / sizeof((a)[0])) |
| #endif |
| |
| /** |
| * WMA_SET_VDEV_IE_SOURCE_HOST - Flag to identify the source of VDEV SET IE |
| * command. The value is 0x0 for the VDEV SET IE WMI commands from mobile |
| * MCL platform. |
| */ |
| #define WMA_SET_VDEV_IE_SOURCE_HOST 0x0 |
| |
| #ifdef FEATURE_WLAN_AUTO_SHUTDOWN |
| /** |
| * wma_post_auto_shutdown_msg() - to post auto shutdown event to sme |
| * |
| * Return: 0 for success or error code |
| */ |
| static int wma_wake_reason_auto_shutdown(void) |
| { |
| tSirAutoShutdownEvtParams *auto_sh_evt; |
| QDF_STATUS qdf_status; |
| struct scheduler_msg sme_msg = { 0 }; |
| |
| auto_sh_evt = (tSirAutoShutdownEvtParams *) |
| qdf_mem_malloc(sizeof(tSirAutoShutdownEvtParams)); |
| if (!auto_sh_evt) { |
| WMA_LOGE(FL("No Mem")); |
| return -ENOMEM; |
| } |
| |
| auto_sh_evt->shutdown_reason = |
| WMI_HOST_AUTO_SHUTDOWN_REASON_TIMER_EXPIRY; |
| sme_msg.type = eWNI_SME_AUTO_SHUTDOWN_IND; |
| sme_msg.bodyptr = auto_sh_evt; |
| sme_msg.bodyval = 0; |
| |
| qdf_status = scheduler_post_msg(QDF_MODULE_ID_SME, &sme_msg); |
| if (!QDF_IS_STATUS_SUCCESS(qdf_status)) { |
| WMA_LOGE("Fail to post eWNI_SME_AUTO_SHUTDOWN_IND msg to SME"); |
| qdf_mem_free(auto_sh_evt); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| #else |
| static inline int wma_wake_reason_auto_shutdown(void) |
| { |
| return 0; |
| } |
| #endif /* FEATURE_WLAN_AUTO_SHUTDOWN */ |
| |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| static int wma_wake_reason_nlod(t_wma_handle *wma, uint8_t vdev_id) |
| { |
| wmi_nlo_event nlo_event = { .vdev_id = vdev_id }; |
| WMI_NLO_MATCH_EVENTID_param_tlvs param = { .fixed_param = &nlo_event }; |
| |
| return target_if_nlo_match_event_handler(wma, (uint8_t *)¶m, |
| sizeof(param)); |
| } |
| #else |
| static inline int wma_wake_reason_nlod(uint8_t vdev_id) |
| { |
| return 0; |
| } |
| #endif /* FEATURE_WLAN_SCAN_PNO */ |
| |
| /** |
| * wma_send_snr_request() - send request to fw to get RSSI stats |
| * @wma_handle: wma handle |
| * @pGetRssiReq: get RSSI request |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_send_snr_request(tp_wma_handle wma_handle, |
| void *pGetRssiReq) |
| { |
| tAniGetRssiReq *pRssiBkUp = NULL; |
| |
| /* command is in progess */ |
| if (NULL != wma_handle->pGetRssiReq) |
| return QDF_STATUS_SUCCESS; |
| |
| /* create a copy of csrRssiCallback to send rssi value |
| * after wmi event |
| */ |
| if (pGetRssiReq) { |
| pRssiBkUp = qdf_mem_malloc(sizeof(tAniGetRssiReq)); |
| if (!pRssiBkUp) { |
| WMA_LOGE("Failed to alloc memory for tAniGetRssiReq"); |
| wma_handle->pGetRssiReq = NULL; |
| return QDF_STATUS_E_NOMEM; |
| } |
| pRssiBkUp->sessionId = |
| ((tAniGetRssiReq *) pGetRssiReq)->sessionId; |
| pRssiBkUp->rssiCallback = |
| ((tAniGetRssiReq *) pGetRssiReq)->rssiCallback; |
| pRssiBkUp->pDevContext = |
| ((tAniGetRssiReq *) pGetRssiReq)->pDevContext; |
| wma_handle->pGetRssiReq = (void *)pRssiBkUp; |
| } |
| |
| if (wmi_unified_snr_request_cmd(wma_handle->wmi_handle)) { |
| WMA_LOGE("Failed to send host stats request to fw"); |
| qdf_mem_free(pRssiBkUp); |
| wma_handle->pGetRssiReq = NULL; |
| return QDF_STATUS_E_FAILURE; |
| } |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_get_snr() - get RSSI from fw |
| * @psnr_req: request params |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_get_snr(tAniGetSnrReq *psnr_req) |
| { |
| tAniGetSnrReq *psnr_req_bkp; |
| tp_wma_handle wma_handle = NULL; |
| struct wma_txrx_node *intr; |
| |
| wma_handle = cds_get_context(QDF_MODULE_ID_WMA); |
| |
| if (NULL == wma_handle) { |
| WMA_LOGE("%s : Failed to get wma_handle", __func__); |
| return QDF_STATUS_E_FAULT; |
| } |
| |
| intr = &wma_handle->interfaces[psnr_req->sessionId]; |
| /* command is in progess */ |
| if (NULL != intr->psnr_req) { |
| WMA_LOGE("%s : previous snr request is pending", __func__); |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| psnr_req_bkp = qdf_mem_malloc(sizeof(tAniGetSnrReq)); |
| if (!psnr_req_bkp) { |
| WMA_LOGE("Failed to allocate memory for tAniGetSnrReq"); |
| return QDF_STATUS_E_NOMEM; |
| } |
| |
| qdf_mem_set(psnr_req_bkp, sizeof(tAniGetSnrReq), 0); |
| psnr_req_bkp->staId = psnr_req->staId; |
| psnr_req_bkp->pDevContext = psnr_req->pDevContext; |
| psnr_req_bkp->snrCallback = psnr_req->snrCallback; |
| intr->psnr_req = (void *)psnr_req_bkp; |
| |
| if (wmi_unified_snr_cmd(wma_handle->wmi_handle, |
| psnr_req->sessionId)) { |
| WMA_LOGE("Failed to send host stats request to fw"); |
| qdf_mem_free(psnr_req_bkp); |
| intr->psnr_req = NULL; |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_process_link_status_req() - process link status request from UMAC |
| * @wma: wma handle |
| * @pGetLinkStatus: get link params |
| * |
| * Return: none |
| */ |
| void wma_process_link_status_req(tp_wma_handle wma, |
| tAniGetLinkStatus *pGetLinkStatus) |
| { |
| struct link_status_params cmd = {0}; |
| struct wma_txrx_node *iface = |
| &wma->interfaces[pGetLinkStatus->sessionId]; |
| |
| if (iface->plink_status_req) { |
| WMA_LOGE("%s:previous link status request is pending,deleting the new request", |
| __func__); |
| qdf_mem_free(pGetLinkStatus); |
| return; |
| } |
| |
| iface->plink_status_req = pGetLinkStatus; |
| cmd.session_id = pGetLinkStatus->sessionId; |
| if (wmi_unified_link_status_req_cmd(wma->wmi_handle, &cmd)) { |
| WMA_LOGE("Failed to send WMI link status request to fw"); |
| iface->plink_status_req = NULL; |
| goto end; |
| } |
| |
| return; |
| |
| end: |
| wma_post_link_status(pGetLinkStatus, LINK_STATUS_LEGACY); |
| } |
| |
| #ifdef WLAN_FEATURE_TSF |
| /** |
| * wma_vdev_tsf_handler() - handle tsf event indicated by FW |
| * @handle: wma context |
| * @data: event buffer |
| * @data len: length of event buffer |
| * |
| * Return: 0 on success |
| */ |
| int wma_vdev_tsf_handler(void *handle, uint8_t *data, uint32_t data_len) |
| { |
| struct scheduler_msg tsf_msg = {0}; |
| WMI_VDEV_TSF_REPORT_EVENTID_param_tlvs *param_buf; |
| wmi_vdev_tsf_report_event_fixed_param *tsf_event; |
| struct stsf *ptsf; |
| |
| if (data == NULL) { |
| WMA_LOGE("%s: invalid pointer", __func__); |
| return -EINVAL; |
| } |
| ptsf = qdf_mem_malloc(sizeof(*ptsf)); |
| if (NULL == ptsf) { |
| WMA_LOGE("%s: failed to allocate tsf data structure", __func__); |
| return -ENOMEM; |
| } |
| |
| param_buf = (WMI_VDEV_TSF_REPORT_EVENTID_param_tlvs *)data; |
| tsf_event = param_buf->fixed_param; |
| |
| ptsf->vdev_id = tsf_event->vdev_id; |
| ptsf->tsf_low = tsf_event->tsf_low; |
| ptsf->tsf_high = tsf_event->tsf_high; |
| ptsf->soc_timer_low = tsf_event->qtimer_low; |
| ptsf->soc_timer_high = tsf_event->qtimer_high; |
| |
| WMA_LOGD("%s: receive WMI_VDEV_TSF_REPORT_EVENTID ", __func__); |
| WMA_LOGD("%s: vdev_id = %u,tsf_low =%u, tsf_high = %u", __func__, |
| ptsf->vdev_id, ptsf->tsf_low, ptsf->tsf_high); |
| |
| tsf_msg.type = eWNI_SME_TSF_EVENT; |
| tsf_msg.bodyptr = ptsf; |
| tsf_msg.bodyval = 0; |
| |
| if (QDF_STATUS_SUCCESS != |
| scheduler_post_msg(QDF_MODULE_ID_SME, &tsf_msg)) { |
| |
| WMA_LOGP("%s: Failed to post eWNI_SME_TSF_EVENT", __func__); |
| qdf_mem_free(ptsf); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| #ifdef QCA_WIFI_3_0 |
| #define TSF_FW_ACTION_CMD TSF_TSTAMP_QTIMER_CAPTURE_REQ |
| #else |
| #define TSF_FW_ACTION_CMD TSF_TSTAMP_CAPTURE_REQ |
| #endif |
| /** |
| * wma_capture_tsf() - send wmi to fw to capture tsf |
| * @wma_handle: wma handler |
| * @vdev_id: vdev id |
| * |
| * Return: wmi send state |
| */ |
| QDF_STATUS wma_capture_tsf(tp_wma_handle wma_handle, uint32_t vdev_id) |
| { |
| QDF_STATUS status = QDF_STATUS_SUCCESS; |
| wmi_buf_t buf; |
| wmi_vdev_tsf_tstamp_action_cmd_fixed_param *cmd; |
| int ret; |
| int len = sizeof(*cmd); |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: failed to allocate memory for cap tsf cmd", |
| __func__); |
| return QDF_STATUS_E_NOMEM; |
| } |
| |
| cmd = (wmi_vdev_tsf_tstamp_action_cmd_fixed_param *) wmi_buf_data(buf); |
| cmd->vdev_id = vdev_id; |
| cmd->tsf_action = TSF_FW_ACTION_CMD; |
| WMA_LOGD("%s :vdev_id %u, tsf_cmd: %d", __func__, cmd->vdev_id, |
| cmd->tsf_action); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_tsf_tstamp_action_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vdev_tsf_tstamp_action_cmd_fixed_param)); |
| |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_VDEV_TSF_TSTAMP_ACTION_CMDID); |
| if (ret != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send returned Error %d", status); |
| status = QDF_STATUS_E_FAILURE; |
| goto error; |
| } |
| |
| return QDF_STATUS_SUCCESS; |
| |
| error: |
| if (buf) |
| wmi_buf_free(buf); |
| return status; |
| } |
| |
| /** |
| * wma_reset_tsf_gpio() - send wmi to fw to reset GPIO |
| * @wma_handle: wma handler |
| * @vdev_id: vdev id |
| * |
| * Return: wmi send state |
| */ |
| QDF_STATUS wma_reset_tsf_gpio(tp_wma_handle wma_handle, uint32_t vdev_id) |
| { |
| QDF_STATUS status = QDF_STATUS_SUCCESS; |
| wmi_buf_t buf; |
| wmi_vdev_tsf_tstamp_action_cmd_fixed_param *cmd; |
| int ret; |
| int len = sizeof(*cmd); |
| uint8_t *buf_ptr; |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: failed to allocate memory for reset tsf gpio", |
| __func__); |
| return QDF_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (uint8_t *) wmi_buf_data(buf); |
| cmd = (wmi_vdev_tsf_tstamp_action_cmd_fixed_param *) buf_ptr; |
| cmd->vdev_id = vdev_id; |
| cmd->tsf_action = TSF_TSTAMP_CAPTURE_RESET; |
| |
| WMA_LOGD("%s :vdev_id %u, TSF_TSTAMP_CAPTURE_RESET", __func__, |
| cmd->vdev_id); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_tsf_tstamp_action_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vdev_tsf_tstamp_action_cmd_fixed_param)); |
| |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_VDEV_TSF_TSTAMP_ACTION_CMDID); |
| |
| if (ret != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send returned Error %d", status); |
| status = QDF_STATUS_E_FAILURE; |
| goto error; |
| } |
| return QDF_STATUS_SUCCESS; |
| |
| error: |
| if (buf) |
| wmi_buf_free(buf); |
| return status; |
| } |
| |
| /** |
| * wma_set_tsf_gpio_pin() - send wmi cmd to configure gpio pin |
| * @handle: wma handler |
| * @pin: GPIO pin id |
| * |
| * Return: QDF_STATUS |
| */ |
| QDF_STATUS wma_set_tsf_gpio_pin(WMA_HANDLE handle, uint32_t pin) |
| { |
| tp_wma_handle wma = (tp_wma_handle)handle; |
| struct pdev_params pdev_param = {0}; |
| int32_t ret; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not set gpio", __func__); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| WMA_LOGD("%s: set tsf gpio pin: %d", __func__, pin); |
| |
| pdev_param.param_id = WMI_PDEV_PARAM_WNTS_CONFIG; |
| pdev_param.param_value = pin; |
| ret = wmi_unified_pdev_param_send(wma->wmi_handle, |
| &pdev_param, |
| WMA_WILDCARD_PDEV_ID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to set tsf gpio pin (%d)", __func__, ret); |
| return QDF_STATUS_E_FAILURE; |
| } |
| return QDF_STATUS_SUCCESS; |
| } |
| #endif |
| |
| /** |
| * wma_set_wisa_params(): Set WISA features related params in FW |
| * @wma_handle: WMA handle |
| * @wisa: Pointer to WISA param struct |
| * |
| * Return: CDF status |
| */ |
| QDF_STATUS wma_set_wisa_params(tp_wma_handle wma_handle, |
| struct sir_wisa_params *wisa) |
| { |
| QDF_STATUS status = QDF_STATUS_SUCCESS; |
| wmi_buf_t buf; |
| wmi_vdev_wisa_cmd_fixed_param *cmd; |
| int ret, len = sizeof(*cmd); |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: failed to allocate memory for WISA params", |
| __func__); |
| return QDF_STATUS_E_NOMEM; |
| } |
| |
| cmd = (wmi_vdev_wisa_cmd_fixed_param *) wmi_buf_data(buf); |
| cmd->wisa_mode = wisa->mode; |
| cmd->vdev_id = wisa->vdev_id; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_wisa_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vdev_wisa_cmd_fixed_param)); |
| |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_VDEV_WISA_CMDID); |
| if (ret != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send returned Error %d", status); |
| status = QDF_STATUS_E_FAILURE; |
| goto error; |
| } |
| return QDF_STATUS_SUCCESS; |
| |
| error: |
| wmi_buf_free(buf); |
| return status; |
| } |
| |
| /** |
| * wma_process_dhcp_ind() - process dhcp indication from SME |
| * @wma_handle: wma handle |
| * @ta_dhcp_ind: DHCP indication |
| * |
| * Return: QDF Status |
| */ |
| QDF_STATUS wma_process_dhcp_ind(tp_wma_handle wma_handle, |
| tAniDHCPInd *ta_dhcp_ind) |
| { |
| uint8_t vdev_id; |
| int status = 0; |
| wmi_peer_set_param_cmd_fixed_param peer_set_param_fp = {0}; |
| |
| if (!ta_dhcp_ind) { |
| WMA_LOGE("%s : DHCP indication is NULL", __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| if (!wma_find_vdev_by_addr(wma_handle, |
| ta_dhcp_ind->adapterMacAddr.bytes, |
| &vdev_id)) { |
| WMA_LOGE("%s: Failed to find vdev id for DHCP indication", |
| __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGD("%s: WMA --> WMI_PEER_SET_PARAM triggered by DHCP, msgType=%s, device_mode=%d, macAddr=" MAC_ADDRESS_STR, |
| __func__, ta_dhcp_ind->msgType == WMA_DHCP_START_IND ? |
| "WMA_DHCP_START_IND" : "WMA_DHCP_STOP_IND", |
| ta_dhcp_ind->device_mode, |
| MAC_ADDR_ARRAY(ta_dhcp_ind->peerMacAddr.bytes)); |
| |
| /* fill in values */ |
| peer_set_param_fp.vdev_id = vdev_id; |
| peer_set_param_fp.param_id = WMI_PEER_CRIT_PROTO_HINT_ENABLED; |
| if (WMA_DHCP_START_IND == ta_dhcp_ind->msgType) |
| peer_set_param_fp.param_value = 1; |
| else |
| peer_set_param_fp.param_value = 0; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(ta_dhcp_ind->peerMacAddr.bytes, |
| &peer_set_param_fp.peer_macaddr); |
| |
| status = wmi_unified_process_dhcp_ind(wma_handle->wmi_handle, |
| &peer_set_param_fp); |
| if (status != EOK) |
| return QDF_STATUS_E_FAILURE; |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_chan_phy__mode() - get WLAN_PHY_MODE for channel |
| * @chan: channel number |
| * @chan_width: maximum channel width possible |
| * @dot11_mode: maximum phy_mode possible |
| * |
| * Return: return WLAN_PHY_MODE |
| */ |
| WLAN_PHY_MODE wma_chan_phy_mode(u8 chan, enum phy_ch_width chan_width, |
| u8 dot11_mode) |
| { |
| WLAN_PHY_MODE phymode = MODE_UNKNOWN; |
| uint16_t bw_val = wlan_reg_get_bw_value(chan_width); |
| |
| if (WLAN_REG_IS_24GHZ_CH(chan)) { |
| if (((CH_WIDTH_5MHZ == chan_width) || |
| (CH_WIDTH_10MHZ == chan_width)) && |
| ((WNI_CFG_DOT11_MODE_11B == dot11_mode) || |
| (WNI_CFG_DOT11_MODE_11G == dot11_mode) || |
| (WNI_CFG_DOT11_MODE_11N == dot11_mode) || |
| (WNI_CFG_DOT11_MODE_ALL == dot11_mode) || |
| (WNI_CFG_DOT11_MODE_11AC == dot11_mode) || |
| (WNI_CFG_DOT11_MODE_11AX == dot11_mode))) |
| phymode = MODE_11G; |
| else { |
| switch (dot11_mode) { |
| case WNI_CFG_DOT11_MODE_11B: |
| if ((bw_val == 20) || (bw_val == 40)) |
| phymode = MODE_11B; |
| break; |
| case WNI_CFG_DOT11_MODE_11G: |
| if ((bw_val == 20) || (bw_val == 40)) |
| phymode = MODE_11G; |
| break; |
| case WNI_CFG_DOT11_MODE_11G_ONLY: |
| if ((bw_val == 20) || (bw_val == 40)) |
| phymode = MODE_11GONLY; |
| break; |
| case WNI_CFG_DOT11_MODE_11N: |
| case WNI_CFG_DOT11_MODE_11N_ONLY: |
| if (bw_val == 20) |
| phymode = MODE_11NG_HT20; |
| else if (bw_val == 40) |
| phymode = MODE_11NG_HT40; |
| break; |
| case WNI_CFG_DOT11_MODE_ALL: |
| case WNI_CFG_DOT11_MODE_11AC: |
| case WNI_CFG_DOT11_MODE_11AC_ONLY: |
| if (bw_val == 20) |
| phymode = MODE_11AC_VHT20_2G; |
| else if (bw_val == 40) |
| phymode = MODE_11AC_VHT40_2G; |
| break; |
| case WNI_CFG_DOT11_MODE_11AX: |
| case WNI_CFG_DOT11_MODE_11AX_ONLY: |
| if (20 == bw_val) |
| phymode = MODE_11AX_HE20_2G; |
| else if (40 == bw_val) |
| phymode = MODE_11AX_HE40_2G; |
| break; |
| default: |
| break; |
| } |
| } |
| } else if (WLAN_REG_IS_11P_CH(chan)) |
| phymode = MODE_11A; |
| else { |
| if (((CH_WIDTH_5MHZ == chan_width) || |
| (CH_WIDTH_10MHZ == chan_width)) && |
| ((WNI_CFG_DOT11_MODE_11A == dot11_mode) || |
| (WNI_CFG_DOT11_MODE_11N == dot11_mode) || |
| (WNI_CFG_DOT11_MODE_ALL == dot11_mode) || |
| (WNI_CFG_DOT11_MODE_11AC == dot11_mode) || |
| (WNI_CFG_DOT11_MODE_11AX == dot11_mode))) |
| phymode = MODE_11A; |
| else { |
| switch (dot11_mode) { |
| case WNI_CFG_DOT11_MODE_11A: |
| if (0 < bw_val) |
| phymode = MODE_11A; |
| break; |
| case WNI_CFG_DOT11_MODE_11N: |
| case WNI_CFG_DOT11_MODE_11N_ONLY: |
| if (bw_val == 20) |
| phymode = MODE_11NA_HT20; |
| else if (40 <= bw_val) |
| phymode = MODE_11NA_HT40; |
| break; |
| case WNI_CFG_DOT11_MODE_ALL: |
| case WNI_CFG_DOT11_MODE_11AC: |
| case WNI_CFG_DOT11_MODE_11AC_ONLY: |
| if (bw_val == 20) |
| phymode = MODE_11AC_VHT20; |
| else if (bw_val == 40) |
| phymode = MODE_11AC_VHT40; |
| else if (bw_val == 80) |
| phymode = MODE_11AC_VHT80; |
| else if (chan_width == CH_WIDTH_160MHZ) |
| phymode = MODE_11AC_VHT160; |
| else if (chan_width == CH_WIDTH_80P80MHZ) |
| phymode = MODE_11AC_VHT80_80; |
| break; |
| case WNI_CFG_DOT11_MODE_11AX: |
| case WNI_CFG_DOT11_MODE_11AX_ONLY: |
| if (20 == bw_val) |
| phymode = MODE_11AX_HE20; |
| else if (40 == bw_val) |
| phymode = MODE_11AX_HE40; |
| else if (80 == bw_val) |
| phymode = MODE_11AX_HE80; |
| else if (CH_WIDTH_160MHZ == chan_width) |
| phymode = MODE_11AX_HE160; |
| else if (CH_WIDTH_80P80MHZ == chan_width) |
| phymode = MODE_11AX_HE80_80; |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| |
| WMA_LOGD("%s: phymode %d channel %d ch_width %d dot11_mode %d", |
| __func__, phymode, chan, chan_width, dot11_mode); |
| |
| QDF_ASSERT(MODE_UNKNOWN != phymode); |
| return phymode; |
| } |
| |
| /** |
| * wma_get_link_speed() -send command to get linkspeed |
| * @handle: wma handle |
| * @pLinkSpeed: link speed info |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_get_link_speed(WMA_HANDLE handle, tSirLinkSpeedInfo *pLinkSpeed) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| wmi_mac_addr peer_macaddr; |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue get link speed cmd", |
| __func__); |
| return QDF_STATUS_E_INVAL; |
| } |
| if (!WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_SERVICE_ESTIMATE_LINKSPEED)) { |
| WMA_LOGE("%s: Linkspeed feature bit not enabled Sending value 0 as link speed.", |
| __func__); |
| wma_send_link_speed(0); |
| return QDF_STATUS_E_FAILURE; |
| } |
| /* Copy the peer macaddress to the wma buffer */ |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(pLinkSpeed->peer_macaddr.bytes, |
| &peer_macaddr); |
| WMA_LOGD("%s: pLinkSpeed->peerMacAddr: %pM, peer_macaddr.mac_addr31to0: 0x%x, peer_macaddr.mac_addr47to32: 0x%x", |
| __func__, pLinkSpeed->peer_macaddr.bytes, |
| peer_macaddr.mac_addr31to0, |
| peer_macaddr.mac_addr47to32); |
| if (wmi_unified_get_link_speed_cmd(wma_handle->wmi_handle, |
| peer_macaddr)) { |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_add_beacon_filter() - Issue WMI command to set beacon filter |
| * @wma: wma handler |
| * @filter_params: beacon_filter_param to set |
| * |
| * Return: Return QDF_STATUS |
| */ |
| QDF_STATUS wma_add_beacon_filter(WMA_HANDLE handle, |
| struct beacon_filter_param *filter_params) |
| { |
| int i; |
| wmi_buf_t wmi_buf; |
| u_int8_t *buf; |
| A_UINT32 *ie_map; |
| int ret; |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| wmi_add_bcn_filter_cmd_fixed_param *cmd; |
| int len = sizeof(wmi_add_bcn_filter_cmd_fixed_param); |
| |
| len += WMI_TLV_HDR_SIZE; |
| len += BCN_FLT_MAX_ELEMS_IE_LIST*sizeof(A_UINT32); |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue set beacon filter", |
| __func__); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| wmi_buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return QDF_STATUS_E_NOMEM; |
| } |
| |
| buf = (u_int8_t *) wmi_buf_data(wmi_buf); |
| |
| cmd = (wmi_add_bcn_filter_cmd_fixed_param *)wmi_buf_data(wmi_buf); |
| cmd->vdev_id = filter_params->vdev_id; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_add_bcn_filter_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_add_bcn_filter_cmd_fixed_param)); |
| |
| buf += sizeof(wmi_add_bcn_filter_cmd_fixed_param); |
| |
| WMITLV_SET_HDR(buf, WMITLV_TAG_ARRAY_UINT32, |
| (BCN_FLT_MAX_ELEMS_IE_LIST * sizeof(u_int32_t))); |
| |
| ie_map = (A_UINT32 *)(buf + WMI_TLV_HDR_SIZE); |
| for (i = 0; i < BCN_FLT_MAX_ELEMS_IE_LIST; i++) { |
| ie_map[i] = filter_params->ie_map[i]; |
| WMA_LOGD("beacon filter ie map = %u", ie_map[i]); |
| } |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, wmi_buf, len, |
| WMI_ADD_BCN_FILTER_CMDID); |
| if (ret) { |
| WMA_LOGE("Failed to send wmi add beacon filter = %d", |
| ret); |
| wmi_buf_free(wmi_buf); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_remove_beacon_filter() - Issue WMI command to remove beacon filter |
| * @wma: wma handler |
| * @filter_params: beacon_filter_params |
| * |
| * Return: Return QDF_STATUS |
| */ |
| QDF_STATUS wma_remove_beacon_filter(WMA_HANDLE handle, |
| struct beacon_filter_param *filter_params) |
| { |
| wmi_buf_t buf; |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| wmi_rmv_bcn_filter_cmd_fixed_param *cmd; |
| int len = sizeof(wmi_rmv_bcn_filter_cmd_fixed_param); |
| int ret; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, cannot issue remove beacon filter", |
| __func__); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return QDF_STATUS_E_NOMEM; |
| } |
| cmd = (wmi_rmv_bcn_filter_cmd_fixed_param *)wmi_buf_data(buf); |
| cmd->vdev_id = filter_params->vdev_id; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_rmv_bcn_filter_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_rmv_bcn_filter_cmd_fixed_param)); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_RMV_BCN_FILTER_CMDID); |
| if (ret) { |
| WMA_LOGE("Failed to send wmi remove beacon filter = %d", |
| ret); |
| wmi_buf_free(buf); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_send_adapt_dwelltime_params() - send adaptive dwelltime configuration |
| * params to firmware |
| * @wma_handle: wma handler |
| * @dwelltime_params: pointer to dwelltime_params |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF failure reason code for failure |
| */ |
| QDF_STATUS wma_send_adapt_dwelltime_params(WMA_HANDLE handle, |
| struct adaptive_dwelltime_params *dwelltime_params) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| struct wmi_adaptive_dwelltime_params wmi_param = {0}; |
| int32_t err; |
| |
| wmi_param.is_enabled = dwelltime_params->is_enabled; |
| wmi_param.dwelltime_mode = dwelltime_params->dwelltime_mode; |
| wmi_param.lpf_weight = dwelltime_params->lpf_weight; |
| wmi_param.passive_mon_intval = dwelltime_params->passive_mon_intval; |
| wmi_param.wifi_act_threshold = dwelltime_params->wifi_act_threshold; |
| err = wmi_unified_send_adapt_dwelltime_params_cmd(wma_handle-> |
| wmi_handle, &wmi_param); |
| if (err) |
| return QDF_STATUS_E_FAILURE; |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| QDF_STATUS wma_send_dbs_scan_selection_params(WMA_HANDLE handle, |
| struct wmi_dbs_scan_sel_params *dbs_scan_params) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| int32_t err; |
| |
| err = wmi_unified_send_dbs_scan_sel_params_cmd(wma_handle-> |
| wmi_handle, dbs_scan_params); |
| if (err) |
| return QDF_STATUS_E_FAILURE; |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| #ifdef FEATURE_GREEN_AP |
| |
| /** |
| * wma_egap_info_status_event() - egap info status event |
| * @handle: pointer to wma handler |
| * @event: pointer to event |
| * @len: len of the event |
| * |
| * Return: 0 for success, otherwise appropriate error code |
| */ |
| static int wma_egap_info_status_event(void *handle, u_int8_t *event, |
| uint32_t len) |
| { |
| WMI_TX_PAUSE_EVENTID_param_tlvs *param_buf; |
| wmi_ap_ps_egap_info_event_fixed_param *egap_info_event; |
| wmi_ap_ps_egap_info_chainmask_list *chainmask_event; |
| u_int8_t *buf_ptr; |
| |
| param_buf = (WMI_TX_PAUSE_EVENTID_param_tlvs *)event; |
| if (!param_buf) { |
| WMA_LOGE("Invalid EGAP Info status event buffer"); |
| return -EINVAL; |
| } |
| egap_info_event = (wmi_ap_ps_egap_info_event_fixed_param *) |
| param_buf->fixed_param; |
| buf_ptr = (uint8_t *)egap_info_event; |
| buf_ptr += sizeof(wmi_ap_ps_egap_info_event_fixed_param); |
| chainmask_event = (wmi_ap_ps_egap_info_chainmask_list *)buf_ptr; |
| WMA_LOGI("mac_id: %d, status: %d, tx_mask: %x, rx_mask: %d", |
| chainmask_event->mac_id, |
| egap_info_event->status, |
| chainmask_event->tx_chainmask, |
| chainmask_event->rx_chainmask); |
| return 0; |
| } |
| |
| /** |
| * wma_send_egap_conf_params() - send wmi cmd of egap configuration params |
| * @wma_handle: wma handler |
| * @egap_params: pointer to egap_params |
| * |
| * Return: 0 for success, otherwise appropriate error code |
| */ |
| QDF_STATUS wma_send_egap_conf_params(WMA_HANDLE handle, |
| struct egap_conf_params *egap_params) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| wmi_ap_ps_egap_param_cmd_fixed_param cmd = {0}; |
| int32_t err; |
| |
| cmd.enable = egap_params->enable; |
| cmd.inactivity_time = egap_params->inactivity_time; |
| cmd.wait_time = egap_params->wait_time; |
| cmd.flags = egap_params->flags; |
| err = wmi_unified_egap_conf_params_cmd(wma_handle->wmi_handle, &cmd); |
| if (err) |
| return QDF_STATUS_E_FAILURE; |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_setup_egap_support() - setup the EGAP support flag |
| * @tgt_cfg: pointer to hdd target configuration |
| * @egap_support: EGAP support flag |
| * |
| * Return: None |
| */ |
| void wma_setup_egap_support(struct wma_tgt_cfg *tgt_cfg, WMA_HANDLE handle) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| |
| if (tgt_cfg && wma_handle) |
| tgt_cfg->egap_support = wma_handle->egap_support; |
| } |
| |
| /** |
| * wma_register_egap_event_handle() - register the EGAP event handle |
| * @wma_handle: wma handler |
| * |
| * Return: None |
| */ |
| void wma_register_egap_event_handle(WMA_HANDLE handle) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| QDF_STATUS status; |
| |
| if (WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_SERVICE_EGAP)) { |
| status = wmi_unified_register_event_handler( |
| wma_handle->wmi_handle, |
| WMI_AP_PS_EGAP_INFO_EVENTID, |
| wma_egap_info_status_event, |
| WMA_RX_SERIALIZER_CTX); |
| if (QDF_IS_STATUS_ERROR(status)) { |
| WMA_LOGE("Failed to register Enhance Green AP event"); |
| wma_handle->egap_support = false; |
| } else { |
| WMA_LOGI("Set the Enhance Green AP event handler"); |
| wma_handle->egap_support = true; |
| } |
| } else |
| wma_handle->egap_support = false; |
| } |
| #endif /* FEATURE_GREEN_AP */ |
| |
| /** |
| * wma_unified_fw_profiling_cmd() - send FW profiling cmd to WLAN FW |
| * @wma: wma handle |
| * @cmd: Profiling command index |
| * @value1: parameter1 value |
| * @value2: parameter2 value |
| * |
| * Return: 0 for success else error code |
| */ |
| QDF_STATUS wma_unified_fw_profiling_cmd(wmi_unified_t wmi_handle, |
| uint32_t cmd, uint32_t value1, uint32_t value2) |
| { |
| int ret; |
| |
| ret = wmi_unified_fw_profiling_data_cmd(wmi_handle, cmd, |
| value1, value2); |
| if (ret) { |
| WMA_LOGE("enable cmd Failed for id %d value %d", |
| value1, value2); |
| return ret; |
| } |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wmi_unified_nat_keepalive_enable() - enable NAT keepalive filter |
| * @wma: wma handle |
| * @vdev_id: vdev id |
| * |
| * Return: 0 for success or error code |
| */ |
| int wmi_unified_nat_keepalive_enable(tp_wma_handle wma, uint8_t vdev_id) |
| { |
| |
| if (wmi_unified_nat_keepalive_en_cmd(wma->wmi_handle, vdev_id)) |
| return QDF_STATUS_E_FAILURE; |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_unified_csa_offload_enable() - sen CSA offload enable command |
| * @wma: wma handle |
| * @vdev_id: vdev id |
| * |
| * Return: 0 for success or error code |
| */ |
| int wma_unified_csa_offload_enable(tp_wma_handle wma, uint8_t vdev_id) |
| { |
| if (wmi_unified_csa_offload_enable(wma->wmi_handle, |
| vdev_id)) { |
| WMA_LOGP("%s: Failed to send CSA offload enable command", |
| __func__); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef WLAN_FEATURE_NAN |
| /** |
| * wma_nan_rsp_event_handler() - Function is used to handle nan response |
| * @handle: wma handle |
| * @event_buf: event buffer |
| * @len: length of buffer |
| * |
| * Return: 0 for success or error code |
| */ |
| int wma_nan_rsp_event_handler(void *handle, uint8_t *event_buf, |
| uint32_t len) |
| { |
| WMI_NAN_EVENTID_param_tlvs *param_buf; |
| tSirNanEvent *nan_rsp_event; |
| wmi_nan_event_hdr *nan_rsp_event_hdr; |
| QDF_STATUS status; |
| struct scheduler_msg message = {0}; |
| uint8_t *buf_ptr; |
| uint32_t alloc_len; |
| |
| /* |
| * This is how received event_buf looks like |
| * |
| * <-------------------- event_buf -----------------------------------> |
| * |
| * <--wmi_nan_event_hdr--><---WMI_TLV_HDR_SIZE---><----- data --------> |
| * |
| * +-----------+---------+-----------------------+--------------------+ |
| * | tlv_header| data_len| WMITLV_TAG_ARRAY_BYTE | nan_rsp_event_data | |
| * +-----------+---------+-----------------------+--------------------+ |
| */ |
| |
| WMA_LOGD("%s: Posting NaN response event to SME", __func__); |
| param_buf = (WMI_NAN_EVENTID_param_tlvs *) event_buf; |
| if (!param_buf) { |
| WMA_LOGE("%s: Invalid nan response event buf", __func__); |
| return -EINVAL; |
| } |
| nan_rsp_event_hdr = param_buf->fixed_param; |
| buf_ptr = (uint8_t *) nan_rsp_event_hdr; |
| alloc_len = sizeof(tSirNanEvent); |
| alloc_len += nan_rsp_event_hdr->data_len; |
| nan_rsp_event = (tSirNanEvent *) qdf_mem_malloc(alloc_len); |
| if (NULL == nan_rsp_event) { |
| WMA_LOGE("%s: Memory allocation failure", __func__); |
| return -ENOMEM; |
| } |
| |
| nan_rsp_event->event_data_len = nan_rsp_event_hdr->data_len; |
| qdf_mem_copy(nan_rsp_event->event_data, buf_ptr + |
| sizeof(wmi_nan_event_hdr) + WMI_TLV_HDR_SIZE, |
| nan_rsp_event->event_data_len); |
| message.type = eWNI_SME_NAN_EVENT; |
| message.bodyptr = (void *)nan_rsp_event; |
| message.bodyval = 0; |
| |
| status = scheduler_post_msg(QDF_MODULE_ID_SME, &message); |
| if (status != QDF_STATUS_SUCCESS) { |
| WMA_LOGE("%s: Failed to post NaN response event to SME", |
| __func__); |
| qdf_mem_free(nan_rsp_event); |
| return -EFAULT; |
| } |
| WMA_LOGD("%s: NaN response event Posted to SME", __func__); |
| return 0; |
| } |
| #else |
| static int wma_nan_rsp_event_handler(void *handle, uint8_t *event_buf, |
| uint32_t len) |
| { |
| return 0; |
| } |
| #endif /* WLAN_FEATURE_NAN */ |
| |
| /** |
| * wma_csa_offload_handler() - CSA event handler |
| * @handle: wma handle |
| * @event: event buffer |
| * @len: buffer length |
| * |
| * This event is sent by firmware when it receives CSA IE. |
| * |
| * Return: 0 for success or error code |
| */ |
| int wma_csa_offload_handler(void *handle, uint8_t *event, uint32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_CSA_HANDLING_EVENTID_param_tlvs *param_buf; |
| wmi_csa_event_fixed_param *csa_event; |
| uint8_t bssid[IEEE80211_ADDR_LEN]; |
| uint8_t vdev_id = 0; |
| uint8_t cur_chan = 0; |
| struct ieee80211_channelswitch_ie *csa_ie; |
| struct csa_offload_params *csa_offload_event; |
| struct ieee80211_extendedchannelswitch_ie *xcsa_ie; |
| struct ieee80211_ie_wide_bw_switch *wb_ie; |
| struct wma_txrx_node *intr = wma->interfaces; |
| |
| param_buf = (WMI_CSA_HANDLING_EVENTID_param_tlvs *) event; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| if (!param_buf) { |
| WMA_LOGE("Invalid csa event buffer"); |
| return -EINVAL; |
| } |
| csa_event = param_buf->fixed_param; |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&csa_event->i_addr2, &bssid[0]); |
| |
| if (wma_find_vdev_by_bssid(wma, bssid, &vdev_id) == NULL) { |
| WMA_LOGE("Invalid bssid received %s:%d", __func__, __LINE__); |
| return -EINVAL; |
| } |
| |
| csa_offload_event = qdf_mem_malloc(sizeof(*csa_offload_event)); |
| if (!csa_offload_event) { |
| WMA_LOGE("QDF MEM Alloc Failed for csa_offload_event"); |
| return -EINVAL; |
| } |
| |
| qdf_mem_zero(csa_offload_event, sizeof(*csa_offload_event)); |
| qdf_mem_copy(csa_offload_event->bssId, &bssid, IEEE80211_ADDR_LEN); |
| |
| if (csa_event->ies_present_flag & WMI_CSA_IE_PRESENT) { |
| csa_ie = (struct ieee80211_channelswitch_ie *) |
| (&csa_event->csa_ie[0]); |
| csa_offload_event->channel = csa_ie->newchannel; |
| csa_offload_event->switch_mode = csa_ie->switchmode; |
| } else if (csa_event->ies_present_flag & WMI_XCSA_IE_PRESENT) { |
| xcsa_ie = (struct ieee80211_extendedchannelswitch_ie *) |
| (&csa_event->xcsa_ie[0]); |
| csa_offload_event->channel = xcsa_ie->newchannel; |
| csa_offload_event->switch_mode = xcsa_ie->switchmode; |
| csa_offload_event->new_op_class = xcsa_ie->newClass; |
| } else { |
| WMA_LOGE("CSA Event error: No CSA IE present"); |
| qdf_mem_free(csa_offload_event); |
| return -EINVAL; |
| } |
| |
| if (csa_event->ies_present_flag & WMI_WBW_IE_PRESENT) { |
| wb_ie = (struct ieee80211_ie_wide_bw_switch *) |
| (&csa_event->wb_ie[0]); |
| csa_offload_event->new_ch_width = wb_ie->new_ch_width; |
| csa_offload_event->new_ch_freq_seg1 = wb_ie->new_ch_freq_seg1; |
| csa_offload_event->new_ch_freq_seg2 = wb_ie->new_ch_freq_seg2; |
| } |
| |
| csa_offload_event->ies_present_flag = csa_event->ies_present_flag; |
| |
| WMA_LOGD("CSA: New Channel = %d BSSID:%pM", |
| csa_offload_event->channel, csa_offload_event->bssId); |
| |
| cur_chan = cds_freq_to_chan(intr[vdev_id].mhz); |
| /* |
| * basic sanity check: requested channel should not be 0 |
| * and equal to home channel |
| */ |
| if ((0 == csa_offload_event->channel) || |
| (cur_chan == csa_offload_event->channel)) { |
| WMA_LOGE("CSA Event with channel %d. Ignore !!", |
| csa_offload_event->channel); |
| qdf_mem_free(csa_offload_event); |
| return -EINVAL; |
| } |
| wma->interfaces[vdev_id].is_channel_switch = true; |
| wma_send_msg(wma, WMA_CSA_OFFLOAD_EVENT, (void *)csa_offload_event, 0); |
| return 0; |
| } |
| |
| #ifdef FEATURE_OEM_DATA_SUPPORT |
| /** |
| * wma_oem_data_response_handler() - OEM data response event handler |
| * @handle: wma handle |
| * @datap: data ptr |
| * @len: data length |
| * |
| * Return: 0 for success or error code |
| */ |
| int wma_oem_data_response_handler(void *handle, |
| uint8_t *datap, uint32_t len) |
| { |
| WMI_OEM_RESPONSE_EVENTID_param_tlvs *param_buf; |
| uint8_t *data; |
| uint32_t datalen; |
| struct oem_data_rsp *oem_rsp; |
| tpAniSirGlobal pmac = cds_get_context(QDF_MODULE_ID_PE); |
| |
| if (!pmac) { |
| WMA_LOGE(FL("Invalid pmac")); |
| return -EINVAL; |
| } |
| |
| if (!pmac->sme.oem_data_rsp_callback) { |
| WMA_LOGE(FL("Callback not registered")); |
| return -EINVAL; |
| } |
| |
| param_buf = (WMI_OEM_RESPONSE_EVENTID_param_tlvs *) datap; |
| if (!param_buf) { |
| WMA_LOGE(FL("Received NULL buf ptr from FW")); |
| return -ENOMEM; |
| } |
| |
| data = param_buf->data; |
| datalen = param_buf->num_data; |
| |
| if (!data) { |
| WMA_LOGE(FL("Received NULL data from FW")); |
| return -EINVAL; |
| } |
| |
| if (datalen > OEM_DATA_RSP_SIZE) { |
| WMA_LOGE(FL("Received data len %d exceeds max value %d"), |
| datalen, OEM_DATA_RSP_SIZE); |
| return -EINVAL; |
| } |
| |
| oem_rsp = qdf_mem_malloc(sizeof(*oem_rsp)); |
| if (!oem_rsp) { |
| WMA_LOGE(FL("Failed to alloc oem_data_rsp")); |
| return -ENOMEM; |
| } |
| oem_rsp->rsp_len = datalen; |
| if (oem_rsp->rsp_len) { |
| oem_rsp->data = qdf_mem_malloc(oem_rsp->rsp_len); |
| if (!oem_rsp->data) { |
| WMA_LOGE(FL("malloc failed for data")); |
| qdf_mem_free(oem_rsp); |
| return -ENOMEM; |
| } |
| } else { |
| WMA_LOGE(FL("Invalid rsp length: %d"), |
| oem_rsp->rsp_len); |
| qdf_mem_free(oem_rsp); |
| return -EINVAL; |
| } |
| |
| qdf_mem_copy(oem_rsp->data, data, datalen); |
| |
| WMA_LOGD("Sending OEM_DATA_RSP(len: %d) to upper layer", datalen); |
| |
| pmac->sme.oem_data_rsp_callback(oem_rsp); |
| |
| if (oem_rsp->data) |
| qdf_mem_free(oem_rsp->data); |
| qdf_mem_free(oem_rsp); |
| |
| return 0; |
| } |
| |
| /** |
| * wma_start_oem_data_req() - start OEM data request to target |
| * @wma_handle: wma handle |
| * @oem_data_req: start request params |
| * |
| * Return: QDF_STATUS |
| */ |
| QDF_STATUS wma_start_oem_data_req(tp_wma_handle wma_handle, |
| struct oem_data_req *oem_data_req) |
| { |
| int ret = 0; |
| |
| WMA_LOGD(FL("Send OEM Data Request to target")); |
| |
| if (!oem_data_req || !oem_data_req->data) { |
| WMA_LOGE(FL("oem_data_req is null")); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE(FL("WMA - closed, can not send Oem data request cmd")); |
| qdf_mem_free(oem_data_req->data); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| ret = wmi_unified_start_oem_data_cmd(wma_handle->wmi_handle, |
| oem_data_req->data_len, |
| oem_data_req->data); |
| |
| if (!QDF_IS_STATUS_SUCCESS(ret)) |
| WMA_LOGE(FL("wmi cmd send failed")); |
| |
| return ret; |
| } |
| #endif /* FEATURE_OEM_DATA_SUPPORT */ |
| |
| #if !defined(REMOVE_PKT_LOG) |
| /** |
| * wma_pktlog_wmi_send_cmd() - send pktlog enable/disable command to target |
| * @handle: wma handle |
| * @params: pktlog params |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_pktlog_wmi_send_cmd(WMA_HANDLE handle, |
| struct ath_pktlog_wmi_params *params) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| int ret; |
| |
| ret = wmi_unified_pktlog_wmi_send_cmd(wma_handle->wmi_handle, |
| params->pktlog_event, |
| params->cmd_id, params->user_triggered); |
| if (ret) |
| return QDF_STATUS_E_FAILURE; |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| #endif /* REMOVE_PKT_LOG */ |
| |
| /** |
| * wma_wow_wake_reason_str() - Converts wow wakeup reason code to text format |
| * @wake_reason - WOW wake reason |
| * |
| * Return: reason code in string format |
| */ |
| static const u8 *wma_wow_wake_reason_str(A_INT32 wake_reason) |
| { |
| switch (wake_reason) { |
| case WOW_REASON_UNSPECIFIED: |
| return "UNSPECIFIED"; |
| case WOW_REASON_NLOD: |
| return "NLOD"; |
| case WOW_REASON_AP_ASSOC_LOST: |
| return "AP_ASSOC_LOST"; |
| case WOW_REASON_LOW_RSSI: |
| return "LOW_RSSI"; |
| case WOW_REASON_DEAUTH_RECVD: |
| return "DEAUTH_RECVD"; |
| case WOW_REASON_DISASSOC_RECVD: |
| return "DISASSOC_RECVD"; |
| case WOW_REASON_GTK_HS_ERR: |
| return "GTK_HS_ERR"; |
| case WOW_REASON_EAP_REQ: |
| return "EAP_REQ"; |
| case WOW_REASON_FOURWAY_HS_RECV: |
| return "FOURWAY_HS_RECV"; |
| case WOW_REASON_TIMER_INTR_RECV: |
| return "TIMER_INTR_RECV"; |
| case WOW_REASON_PATTERN_MATCH_FOUND: |
| return "PATTERN_MATCH_FOUND"; |
| case WOW_REASON_RECV_MAGIC_PATTERN: |
| return "RECV_MAGIC_PATTERN"; |
| case WOW_REASON_P2P_DISC: |
| return "P2P_DISC"; |
| case WOW_REASON_WLAN_HB: |
| return "WLAN_HB"; |
| case WOW_REASON_CSA_EVENT: |
| return "CSA_EVENT"; |
| case WOW_REASON_PROBE_REQ_WPS_IE_RECV: |
| return "PROBE_REQ_WPS_IE_RECV"; |
| case WOW_REASON_AUTH_REQ_RECV: |
| return "AUTH_REQ_RECV"; |
| case WOW_REASON_ASSOC_REQ_RECV: |
| return "ASSOC_REQ_RECV"; |
| case WOW_REASON_HTT_EVENT: |
| return "HTT_EVENT"; |
| case WOW_REASON_RA_MATCH: |
| return "RA_MATCH"; |
| case WOW_REASON_HOST_AUTO_SHUTDOWN: |
| return "HOST_AUTO_SHUTDOWN"; |
| case WOW_REASON_IOAC_MAGIC_EVENT: |
| return "IOAC_MAGIC_EVENT"; |
| case WOW_REASON_IOAC_SHORT_EVENT: |
| return "IOAC_SHORT_EVENT"; |
| case WOW_REASON_IOAC_EXTEND_EVENT: |
| return "IOAC_EXTEND_EVENT"; |
| case WOW_REASON_IOAC_TIMER_EVENT: |
| return "IOAC_TIMER_EVENT"; |
| case WOW_REASON_ROAM_HO: |
| return "ROAM_HO"; |
| case WOW_REASON_DFS_PHYERR_RADADR_EVENT: |
| return "DFS_PHYERR_RADADR_EVENT"; |
| case WOW_REASON_BEACON_RECV: |
| return "BEACON_RECV"; |
| case WOW_REASON_CLIENT_KICKOUT_EVENT: |
| return "CLIENT_KICKOUT_EVENT"; |
| case WOW_REASON_NAN_EVENT: |
| return "NAN_EVENT"; |
| case WOW_REASON_EXTSCAN: |
| return "EXTSCAN"; |
| case WOW_REASON_RSSI_BREACH_EVENT: |
| return "RSSI_BREACH_EVENT"; |
| case WOW_REASON_IOAC_REV_KA_FAIL_EVENT: |
| return "IOAC_REV_KA_FAIL_EVENT"; |
| case WOW_REASON_IOAC_SOCK_EVENT: |
| return "IOAC_SOCK_EVENT"; |
| case WOW_REASON_NLO_SCAN_COMPLETE: |
| return "NLO_SCAN_COMPLETE"; |
| case WOW_REASON_PACKET_FILTER_MATCH: |
| return "PACKET_FILTER_MATCH"; |
| case WOW_REASON_ASSOC_RES_RECV: |
| return "ASSOC_RES_RECV"; |
| case WOW_REASON_REASSOC_REQ_RECV: |
| return "REASSOC_REQ_RECV"; |
| case WOW_REASON_REASSOC_RES_RECV: |
| return "REASSOC_RES_RECV"; |
| case WOW_REASON_ACTION_FRAME_RECV: |
| return "ACTION_FRAME_RECV"; |
| case WOW_REASON_BPF_ALLOW: |
| return "BPF_ALLOW"; |
| case WOW_REASON_NAN_DATA: |
| return "NAN_DATA"; |
| case WOW_REASON_OEM_RESPONSE_EVENT: |
| return "OEM_RESPONSE_EVENT"; |
| case WOW_REASON_TDLS_CONN_TRACKER_EVENT: |
| return "TDLS_CONN_TRACKER_EVENT"; |
| case WOW_REASON_CRITICAL_LOG: |
| return "CRITICAL_LOG"; |
| case WOW_REASON_P2P_LISTEN_OFFLOAD: |
| return "P2P_LISTEN_OFFLOAD"; |
| case WOW_REASON_NAN_EVENT_WAKE_HOST: |
| return "NAN_EVENT_WAKE_HOST"; |
| case WOW_REASON_DEBUG_TEST: |
| return "DEBUG_TEST"; |
| default: |
| return "unknown"; |
| } |
| } |
| |
| /** |
| * wma_wow_stats_display() - display wow wake up stats |
| * @stats: per vdev stats counters |
| * |
| * Return: none |
| */ |
| static void wma_wow_stats_display(struct sir_vdev_wow_stats *stats) |
| { |
| WMA_LOGA("uc %d bc %d v4_mc %d v6_mc %d ra %d ns %d na %d pno_match %d pno_complete %d gscan %d low_rssi %d rssi_breach %d icmp %d icmpv6 %d oem %d", |
| stats->ucast, |
| stats->bcast, |
| stats->ipv4_mcast, |
| stats->ipv6_mcast, |
| stats->ipv6_mcast_ra, |
| stats->ipv6_mcast_ns, |
| stats->ipv6_mcast_na, |
| stats->pno_match, |
| stats->pno_complete, |
| stats->gscan, |
| stats->low_rssi, |
| stats->rssi_breach, |
| stats->icmpv4, |
| stats->icmpv6, |
| stats->oem_response); |
| } |
| |
| static void wma_print_wow_stats(t_wma_handle *wma, |
| WOW_EVENT_INFO_fixed_param *wake_info) |
| { |
| struct sir_vdev_wow_stats *stats; |
| |
| switch (wake_info->wake_reason) { |
| case WOW_REASON_BPF_ALLOW: |
| case WOW_REASON_PATTERN_MATCH_FOUND: |
| case WOW_REASON_RA_MATCH: |
| case WOW_REASON_NLOD: |
| case WOW_REASON_NLO_SCAN_COMPLETE: |
| case WOW_REASON_LOW_RSSI: |
| case WOW_REASON_EXTSCAN: |
| case WOW_REASON_RSSI_BREACH_EVENT: |
| case WOW_REASON_OEM_RESPONSE_EVENT: |
| break; |
| default: |
| return; |
| } |
| |
| stats = &wma->interfaces[wake_info->vdev_id].wow_stats; |
| wma_wow_stats_display(stats); |
| } |
| |
| /** |
| * wma_inc_wow_stats() - maintain wow pattern match wake up stats |
| * @wma: wma handle, containing the stats counters |
| * @wake_info: the wake event information |
| * |
| * Return: none |
| */ |
| static void wma_inc_wow_stats(t_wma_handle *wma, |
| WOW_EVENT_INFO_fixed_param *wake_info) |
| { |
| struct sir_vdev_wow_stats *stats; |
| |
| if (wake_info->wake_reason == WOW_REASON_UNSPECIFIED) { |
| wma->wow_unspecified_wake_count++; |
| return; |
| } |
| |
| stats = &wma->interfaces[wake_info->vdev_id].wow_stats; |
| switch (wake_info->wake_reason) { |
| case WOW_REASON_RA_MATCH: |
| stats->ipv6_mcast++; |
| stats->ipv6_mcast_ra++; |
| stats->icmpv6++; |
| break; |
| case WOW_REASON_NLOD: |
| stats->pno_match++; |
| break; |
| case WOW_REASON_NLO_SCAN_COMPLETE: |
| stats->pno_complete++; |
| break; |
| case WOW_REASON_LOW_RSSI: |
| stats->low_rssi++; |
| break; |
| case WOW_REASON_EXTSCAN: |
| stats->gscan++; |
| break; |
| case WOW_REASON_RSSI_BREACH_EVENT: |
| stats->rssi_breach++; |
| break; |
| case WOW_REASON_OEM_RESPONSE_EVENT: |
| stats->oem_response++; |
| break; |
| } |
| } |
| |
| #ifdef FEATURE_WLAN_EXTSCAN |
| /** |
| * wma_extscan_get_eventid_from_tlvtag() - map tlv tag to corresponding event id |
| * @tag: WMI TLV tag |
| * |
| * Return: |
| * 0 if TLV tag is invalid |
| * else return corresponding WMI event id |
| */ |
| static int wma_extscan_get_eventid_from_tlvtag(uint32_t tag) |
| { |
| uint32_t event_id; |
| |
| switch (tag) { |
| case WMITLV_TAG_STRUC_wmi_extscan_start_stop_event_fixed_param: |
| event_id = WMI_EXTSCAN_START_STOP_EVENTID; |
| break; |
| |
| case WMITLV_TAG_STRUC_wmi_extscan_operation_event_fixed_param: |
| event_id = WMI_EXTSCAN_OPERATION_EVENTID; |
| break; |
| |
| case WMITLV_TAG_STRUC_wmi_extscan_table_usage_event_fixed_param: |
| event_id = WMI_EXTSCAN_TABLE_USAGE_EVENTID; |
| break; |
| |
| case WMITLV_TAG_STRUC_wmi_extscan_cached_results_event_fixed_param: |
| event_id = WMI_EXTSCAN_CACHED_RESULTS_EVENTID; |
| break; |
| |
| case WMITLV_TAG_STRUC_wmi_extscan_wlan_change_results_event_fixed_param: |
| event_id = WMI_EXTSCAN_WLAN_CHANGE_RESULTS_EVENTID; |
| break; |
| |
| case WMITLV_TAG_STRUC_wmi_extscan_hotlist_match_event_fixed_param: |
| event_id = WMI_EXTSCAN_HOTLIST_MATCH_EVENTID; |
| break; |
| |
| case WMITLV_TAG_STRUC_wmi_extscan_capabilities_event_fixed_param: |
| event_id = WMI_EXTSCAN_CAPABILITIES_EVENTID; |
| break; |
| |
| default: |
| event_id = 0; |
| WMA_LOGE("%s: Unknown tag: %d", __func__, tag); |
| break; |
| } |
| |
| WMA_LOGI("%s: For tag %d WMI event 0x%x", __func__, tag, event_id); |
| return event_id; |
| } |
| #else |
| static int wma_extscan_get_eventid_from_tlvtag(uint32_t tag) |
| { |
| return 0; |
| } |
| #endif |
| |
| /** |
| * wow_get_wmi_eventid() - map reason or tlv tag to corresponding event id |
| * @tag: WMI TLV tag |
| * @reason: WOW reason |
| * |
| * WOW reason type is primarily used to find the ID. If there could be |
| * multiple events that can be sent as a WOW event with same reason |
| * then tlv tag is used to identify the corresponding event. |
| * |
| * Return: |
| * 0 if TLV tag/reason is invalid |
| * else return corresponding WMI event id |
| */ |
| static int wow_get_wmi_eventid(int32_t reason, uint32_t tag) |
| { |
| switch (reason) { |
| case WOW_REASON_AP_ASSOC_LOST: |
| return WMI_ROAM_EVENTID; |
| case WOW_REASON_NLO_SCAN_COMPLETE: |
| return WMI_NLO_SCAN_COMPLETE_EVENTID; |
| case WOW_REASON_CSA_EVENT: |
| return WMI_CSA_HANDLING_EVENTID; |
| case WOW_REASON_LOW_RSSI: |
| return WMI_ROAM_EVENTID; |
| case WOW_REASON_CLIENT_KICKOUT_EVENT: |
| return WMI_PEER_STA_KICKOUT_EVENTID; |
| case WOW_REASON_EXTSCAN: |
| return wma_extscan_get_eventid_from_tlvtag(tag); |
| case WOW_REASON_RSSI_BREACH_EVENT: |
| return WMI_RSSI_BREACH_EVENTID; |
| case WOW_REASON_NAN_EVENT: |
| return WMI_NAN_EVENTID; |
| case WOW_REASON_NAN_DATA: |
| return wma_ndp_get_eventid_from_tlvtag(tag); |
| case WOW_REASON_TDLS_CONN_TRACKER_EVENT: |
| return WOW_TDLS_CONN_TRACKER_EVENT; |
| case WOW_REASON_ROAM_HO: |
| return WMI_ROAM_EVENTID; |
| default: |
| WMA_LOGD(FL("No Event Id for WOW reason %s(%d)"), |
| wma_wow_wake_reason_str(reason), reason); |
| return 0; |
| } |
| } |
| |
| /** |
| * is_piggybacked_event() - Returns true if the given wake reason indicates |
| * there will be piggybacked TLV event data |
| * @reason: WOW reason |
| * |
| * There are three types of WoW event payloads: none, piggybacked event, and |
| * network packet. This function returns true for wake reasons that fall into |
| * the piggybacked event case. |
| * |
| * Return: true for piggybacked event data |
| */ |
| static bool is_piggybacked_event(int32_t reason) |
| { |
| switch (reason) { |
| case WOW_REASON_AP_ASSOC_LOST: |
| case WOW_REASON_NLO_SCAN_COMPLETE: |
| case WOW_REASON_CSA_EVENT: |
| case WOW_REASON_LOW_RSSI: |
| case WOW_REASON_CLIENT_KICKOUT_EVENT: |
| case WOW_REASON_EXTSCAN: |
| case WOW_REASON_RSSI_BREACH_EVENT: |
| case WOW_REASON_NAN_EVENT: |
| case WOW_REASON_NAN_DATA: |
| case WOW_REASON_TDLS_CONN_TRACKER_EVENT: |
| case WOW_REASON_ROAM_HO: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| /** |
| * wma_pkt_proto_subtype_to_string() - to convert proto subtype |
| * of data packet to string. |
| * @proto_subtype: proto subtype for data packet |
| * |
| * This function returns the string for the proto subtype of |
| * data packet. |
| * |
| * Return: string for proto subtype for data packet |
| */ |
| static const char * |
| wma_pkt_proto_subtype_to_string(enum qdf_proto_subtype proto_subtype) |
| { |
| switch (proto_subtype) { |
| case QDF_PROTO_EAPOL_M1: |
| return "EAPOL M1"; |
| case QDF_PROTO_EAPOL_M2: |
| return "EAPOL M2"; |
| case QDF_PROTO_EAPOL_M3: |
| return "EAPOL M3"; |
| case QDF_PROTO_EAPOL_M4: |
| return "EAPOL M4"; |
| case QDF_PROTO_DHCP_DISCOVER: |
| return "DHCP DISCOVER"; |
| case QDF_PROTO_DHCP_REQUEST: |
| return "DHCP REQUEST"; |
| case QDF_PROTO_DHCP_OFFER: |
| return "DHCP OFFER"; |
| case QDF_PROTO_DHCP_ACK: |
| return "DHCP ACK"; |
| case QDF_PROTO_DHCP_NACK: |
| return "DHCP NACK"; |
| case QDF_PROTO_DHCP_RELEASE: |
| return "DHCP RELEASE"; |
| case QDF_PROTO_DHCP_INFORM: |
| return "DHCP INFORM"; |
| case QDF_PROTO_DHCP_DECLINE: |
| return "DHCP DECLINE"; |
| case QDF_PROTO_ARP_REQ: |
| return "ARP REQUEST"; |
| case QDF_PROTO_ARP_RES: |
| return "ARP RESPONSE"; |
| case QDF_PROTO_ICMP_REQ: |
| return "ICMP REQUEST"; |
| case QDF_PROTO_ICMP_RES: |
| return "ICMP RESPONSE"; |
| case QDF_PROTO_ICMPV6_REQ: |
| return "ICMPV6 REQUEST"; |
| case QDF_PROTO_ICMPV6_RES: |
| return "ICMPV6 RESPONSE"; |
| case QDF_PROTO_ICMPV6_RS: |
| return "ICMPV6 RS"; |
| case QDF_PROTO_ICMPV6_RA: |
| return "ICMPV6 RA"; |
| case QDF_PROTO_ICMPV6_NS: |
| return "ICMPV6 NS"; |
| case QDF_PROTO_ICMPV6_NA: |
| return "ICMPV6 NA"; |
| case QDF_PROTO_IPV4_UDP: |
| return "IPV4 UDP Packet"; |
| case QDF_PROTO_IPV4_TCP: |
| return "IPV4 TCP Packet"; |
| case QDF_PROTO_IPV6_UDP: |
| return "IPV6 UDP Packet"; |
| case QDF_PROTO_IPV6_TCP: |
| return "IPV6 TCP Packet"; |
| default: |
| return NULL; |
| } |
| } |
| |
| /** |
| * wma_wow_get_pkt_proto_subtype() - get the proto subtype of the packet. |
| * @data: Pointer to the packet data buffer |
| * @len: length of the packet data buffer |
| * |
| * Return: proto subtype of the packet. |
| */ |
| static enum qdf_proto_subtype |
| wma_wow_get_pkt_proto_subtype(uint8_t *data, uint32_t len) |
| { |
| uint16_t eth_type; |
| uint8_t proto_type; |
| |
| if (len < QDF_NBUF_TRAC_ETH_TYPE_OFFSET + 2) { |
| WMA_LOGE("Malformed ethernet packet: length %u < %d", |
| len, QDF_NBUF_TRAC_ETH_TYPE_OFFSET + 2); |
| return QDF_PROTO_INVALID; |
| } |
| |
| eth_type = *(uint16_t *)(data + QDF_NBUF_TRAC_ETH_TYPE_OFFSET); |
| eth_type = qdf_cpu_to_be16(eth_type); |
| |
| WMA_LOGD("Ether Type: 0x%04x", eth_type); |
| switch (eth_type) { |
| case QDF_NBUF_TRAC_EAPOL_ETH_TYPE: |
| if (len < WMA_EAPOL_SUBTYPE_GET_MIN_LEN) |
| return QDF_PROTO_INVALID; |
| |
| WMA_LOGD("EAPOL Packet"); |
| return qdf_nbuf_data_get_eapol_subtype(data); |
| |
| case QDF_NBUF_TRAC_ARP_ETH_TYPE: |
| if (len < WMA_ARP_SUBTYPE_GET_MIN_LEN) |
| return QDF_PROTO_INVALID; |
| |
| WMA_LOGD("ARP Packet"); |
| return qdf_nbuf_data_get_arp_subtype(data); |
| |
| case QDF_NBUF_TRAC_IPV4_ETH_TYPE: |
| if (len < WMA_IPV4_PROTO_GET_MIN_LEN) |
| return QDF_PROTO_INVALID; |
| |
| WMA_LOGD("IPV4 Packet"); |
| |
| proto_type = qdf_nbuf_data_get_ipv4_proto(data); |
| WMA_LOGD("IPV4_proto_type: %u", proto_type); |
| |
| switch (proto_type) { |
| case QDF_NBUF_TRAC_ICMP_TYPE: |
| if (len < WMA_ICMP_SUBTYPE_GET_MIN_LEN) |
| return QDF_PROTO_INVALID; |
| |
| WMA_LOGD("ICMP Packet"); |
| return qdf_nbuf_data_get_icmp_subtype(data); |
| |
| case QDF_NBUF_TRAC_UDP_TYPE: |
| if (len < WMA_IS_DHCP_GET_MIN_LEN) |
| return QDF_PROTO_IPV4_UDP; |
| |
| if (!qdf_nbuf_data_is_ipv4_dhcp_pkt(data)) |
| return QDF_PROTO_INVALID; |
| |
| if (len < WMA_DHCP_SUBTYPE_GET_MIN_LEN) |
| return QDF_PROTO_INVALID; |
| |
| WMA_LOGD("DHCP Packet"); |
| return qdf_nbuf_data_get_dhcp_subtype(data); |
| |
| case QDF_NBUF_TRAC_TCP_TYPE: |
| return QDF_PROTO_IPV4_TCP; |
| |
| default: |
| return QDF_PROTO_INVALID; |
| } |
| |
| case QDF_NBUF_TRAC_IPV6_ETH_TYPE: |
| if (len < WMA_IPV6_PROTO_GET_MIN_LEN) |
| return QDF_PROTO_INVALID; |
| |
| WMA_LOGD("IPV6 Packet"); |
| |
| proto_type = qdf_nbuf_data_get_ipv6_proto(data); |
| WMA_LOGD("IPV6_proto_type: %u", proto_type); |
| |
| switch (proto_type) { |
| case QDF_NBUF_TRAC_ICMPV6_TYPE: |
| if (len < WMA_ICMPV6_SUBTYPE_GET_MIN_LEN) |
| return QDF_PROTO_INVALID; |
| |
| WMA_LOGD("ICMPV6 Packet"); |
| return qdf_nbuf_data_get_icmpv6_subtype(data); |
| |
| case QDF_NBUF_TRAC_UDP_TYPE: |
| return QDF_PROTO_IPV6_UDP; |
| |
| case QDF_NBUF_TRAC_TCP_TYPE: |
| return QDF_PROTO_IPV6_TCP; |
| |
| default: |
| return QDF_PROTO_INVALID; |
| } |
| |
| default: |
| return QDF_PROTO_INVALID; |
| } |
| } |
| |
| static inline bool wma_pkt_is_tcpv4_mcast(uint8_t *data, uint32_t length) |
| { |
| return length >= WMA_IPV4_PKT_INFO_GET_MIN_LEN && |
| qdf_nbuf_data_is_ipv4_mcast_pkt(data); |
| } |
| |
| static inline bool wma_pkt_is_tcpv6_mcast(uint8_t *data, uint32_t length) |
| { |
| return length >= WMA_IPV6_PKT_INFO_GET_MIN_LEN && |
| qdf_nbuf_data_is_ipv6_mcast_pkt(data); |
| } |
| |
| static void wma_log_pkt_eapol(uint8_t *data, uint32_t length) |
| { |
| uint16_t pkt_len, key_len; |
| |
| if (length < WMA_EAPOL_INFO_GET_MIN_LEN) |
| return; |
| |
| pkt_len = *(uint16_t *)(data + EAPOL_PKT_LEN_OFFSET); |
| key_len = *(uint16_t *)(data + EAPOL_KEY_LEN_OFFSET); |
| WMA_LOGD("Pkt_len: %u, Key_len: %u", |
| qdf_cpu_to_be16(pkt_len), qdf_cpu_to_be16(key_len)); |
| } |
| |
| static void wma_log_pkt_dhcp(uint8_t *data, uint32_t length) |
| { |
| uint16_t pkt_len; |
| uint32_t trans_id; |
| |
| if (length < WMA_DHCP_INFO_GET_MIN_LEN) |
| return; |
| |
| pkt_len = *(uint16_t *)(data + DHCP_PKT_LEN_OFFSET); |
| trans_id = *(uint32_t *)(data + DHCP_TRANSACTION_ID_OFFSET); |
| WMA_LOGD("Pkt_len: %u, Transaction_id: %u", |
| qdf_cpu_to_be16(pkt_len), qdf_cpu_to_be16(trans_id)); |
| } |
| |
| static void wma_log_pkt_icmpv4(uint8_t *data, uint32_t length) |
| { |
| uint16_t pkt_len, seq_num; |
| |
| if (length < WMA_IPV4_PKT_INFO_GET_MIN_LEN) |
| return; |
| |
| pkt_len = *(uint16_t *)(data + IPV4_PKT_LEN_OFFSET); |
| seq_num = *(uint16_t *)(data + ICMP_SEQ_NUM_OFFSET); |
| WMA_LOGD("Pkt_len: %u, Seq_num: %u", |
| qdf_cpu_to_be16(pkt_len), qdf_cpu_to_be16(seq_num)); |
| } |
| |
| static void wma_log_pkt_icmpv6(uint8_t *data, uint32_t length) |
| { |
| uint16_t pkt_len, seq_num; |
| |
| if (length < WMA_IPV6_PKT_INFO_GET_MIN_LEN) |
| return; |
| |
| pkt_len = *(uint16_t *)(data + IPV6_PKT_LEN_OFFSET); |
| seq_num = *(uint16_t *)(data + ICMPV6_SEQ_NUM_OFFSET); |
| WMA_LOGD("Pkt_len: %u, Seq_num: %u", |
| qdf_cpu_to_be16(pkt_len), qdf_cpu_to_be16(seq_num)); |
| } |
| |
| static void wma_log_pkt_ipv4(uint8_t *data, uint32_t length) |
| { |
| uint16_t pkt_len, src_port, dst_port; |
| |
| if (length < WMA_IPV4_PKT_INFO_GET_MIN_LEN) |
| return; |
| |
| pkt_len = *(uint16_t *)(data + IPV4_PKT_LEN_OFFSET); |
| src_port = *(uint16_t *)(data + IPV4_SRC_PORT_OFFSET); |
| dst_port = *(uint16_t *)(data + IPV4_DST_PORT_OFFSET); |
| WMA_LOGD("Pkt_len: %u, src_port: %u, dst_port: %u", |
| qdf_cpu_to_be16(pkt_len), |
| qdf_cpu_to_be16(src_port), |
| qdf_cpu_to_be16(dst_port)); |
| } |
| |
| static void wma_log_pkt_ipv6(uint8_t *data, uint32_t length) |
| { |
| uint16_t pkt_len, src_port, dst_port; |
| |
| if (length < WMA_IPV6_PKT_INFO_GET_MIN_LEN) |
| return; |
| |
| pkt_len = *(uint16_t *)(data + IPV6_PKT_LEN_OFFSET); |
| src_port = *(uint16_t *)(data + IPV6_SRC_PORT_OFFSET); |
| dst_port = *(uint16_t *)(data + IPV6_DST_PORT_OFFSET); |
| WMA_LOGD("Pkt_len: %u, src_port: %u, dst_port: %u", |
| qdf_cpu_to_be16(pkt_len), |
| qdf_cpu_to_be16(src_port), |
| qdf_cpu_to_be16(dst_port)); |
| } |
| |
| static void wma_log_pkt_tcpv4(uint8_t *data, uint32_t length) |
| { |
| uint32_t seq_num; |
| |
| if (length < WMA_IPV4_PKT_INFO_GET_MIN_LEN) |
| return; |
| |
| seq_num = *(uint32_t *)(data + IPV4_TCP_SEQ_NUM_OFFSET); |
| WMA_LOGD("TCP_seq_num: %u", qdf_cpu_to_be16(seq_num)); |
| } |
| |
| static void wma_log_pkt_tcpv6(uint8_t *data, uint32_t length) |
| { |
| uint32_t seq_num; |
| |
| if (length < WMA_IPV6_PKT_INFO_GET_MIN_LEN) |
| return; |
| |
| seq_num = *(uint32_t *)(data + IPV6_TCP_SEQ_NUM_OFFSET); |
| WMA_LOGD("TCP_seq_num: %u", qdf_cpu_to_be16(seq_num)); |
| } |
| |
| /** |
| * wma_wow_parse_data_pkt() - API to parse data buffer for data |
| * packet that resulted in WOW wakeup. |
| * @stats: per-vdev stats for tracking packet types |
| * @data: Pointer to data buffer |
| * @length: data buffer length |
| * |
| * This function parses the data buffer received (first few bytes of |
| * skb->data) to get informaton like src mac addr, dst mac addr, packet |
| * len, seq_num, etc. It also increments stats for different packet types. |
| * |
| * Return: void |
| */ |
| static void wma_wow_parse_data_pkt(struct sir_vdev_wow_stats *stats, |
| uint8_t *data, |
| uint32_t length) |
| { |
| enum qdf_proto_subtype proto_subtype; |
| const char *proto_subtype_name; |
| uint8_t *dest_mac; |
| uint8_t *src_mac; |
| |
| WMA_LOGD("packet length: %u", length); |
| if (length < QDF_NBUF_TRAC_IPV4_OFFSET) |
| return; |
| |
| src_mac = data + QDF_NBUF_SRC_MAC_OFFSET; |
| dest_mac = data + QDF_NBUF_DEST_MAC_OFFSET; |
| WMA_LOGD("Src_mac: " MAC_ADDRESS_STR ", Dst_mac: " MAC_ADDRESS_STR, |
| MAC_ADDR_ARRAY(src_mac), MAC_ADDR_ARRAY(dest_mac)); |
| |
| switch (*dest_mac) { |
| case WMA_BCAST_MAC_ADDR: |
| stats->bcast++; |
| break; |
| case WMA_MCAST_IPV4_MAC_ADDR: |
| stats->ipv4_mcast++; |
| break; |
| case WMA_MCAST_IPV6_MAC_ADDR: |
| stats->ipv6_mcast++; |
| break; |
| default: |
| stats->ucast++; |
| |
| /* mcast ipv4/6 in ucast mac counts for both */ |
| if (wma_pkt_is_tcpv4_mcast(data, length)) |
| stats->ipv4_mcast++; |
| if (wma_pkt_is_tcpv6_mcast(data, length)) |
| stats->ipv6_mcast++; |
| |
| break; |
| } |
| |
| proto_subtype = wma_wow_get_pkt_proto_subtype(data, length); |
| proto_subtype_name = wma_pkt_proto_subtype_to_string(proto_subtype); |
| if (proto_subtype_name) |
| WMA_LOGD("WOW Wakeup: %s rcvd", proto_subtype_name); |
| |
| switch (proto_subtype) { |
| case QDF_PROTO_EAPOL_M1: |
| case QDF_PROTO_EAPOL_M2: |
| case QDF_PROTO_EAPOL_M3: |
| case QDF_PROTO_EAPOL_M4: |
| wma_log_pkt_eapol(data, length); |
| break; |
| |
| case QDF_PROTO_DHCP_DISCOVER: |
| case QDF_PROTO_DHCP_REQUEST: |
| case QDF_PROTO_DHCP_OFFER: |
| case QDF_PROTO_DHCP_ACK: |
| case QDF_PROTO_DHCP_NACK: |
| case QDF_PROTO_DHCP_RELEASE: |
| case QDF_PROTO_DHCP_INFORM: |
| case QDF_PROTO_DHCP_DECLINE: |
| wma_log_pkt_dhcp(data, length); |
| break; |
| |
| case QDF_PROTO_ICMP_REQ: |
| case QDF_PROTO_ICMP_RES: |
| stats->icmpv4++; |
| wma_log_pkt_icmpv4(data, length); |
| break; |
| |
| case QDF_PROTO_ICMPV6_REQ: |
| case QDF_PROTO_ICMPV6_RES: |
| case QDF_PROTO_ICMPV6_RS: |
| stats->icmpv6++; |
| wma_log_pkt_icmpv6(data, length); |
| break; |
| case QDF_PROTO_ICMPV6_RA: |
| stats->icmpv6++; |
| stats->ipv6_mcast_ra++; |
| wma_log_pkt_icmpv6(data, length); |
| break; |
| case QDF_PROTO_ICMPV6_NS: |
| stats->icmpv6++; |
| stats->ipv6_mcast_ns++; |
| wma_log_pkt_icmpv6(data, length); |
| break; |
| case QDF_PROTO_ICMPV6_NA: |
| stats->icmpv6++; |
| stats->ipv6_mcast_na++; |
| wma_log_pkt_icmpv6(data, length); |
| break; |
| |
| case QDF_PROTO_IPV4_UDP: |
| wma_log_pkt_ipv4(data, length); |
| break; |
| case QDF_PROTO_IPV4_TCP: |
| wma_log_pkt_ipv4(data, length); |
| wma_log_pkt_tcpv4(data, length); |
| break; |
| |
| case QDF_PROTO_IPV6_UDP: |
| wma_log_pkt_ipv6(data, length); |
| break; |
| case QDF_PROTO_IPV6_TCP: |
| wma_log_pkt_ipv6(data, length); |
| wma_log_pkt_tcpv6(data, length); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /** |
| * wma_wow_dump_mgmt_buffer() - API to parse data buffer for mgmt. |
| * packet that resulted in WOW wakeup. |
| * @wow_packet_buffer: Pointer to data buffer |
| * @buf_len: length of data buffer |
| * |
| * This function parses the data buffer received (802.11 header) |
| * to get informaton like src mac addr, dst mac addr, seq_num, |
| * frag_num, etc. |
| * |
| * Return: void |
| */ |
| static void wma_wow_dump_mgmt_buffer(uint8_t *wow_packet_buffer, |
| uint32_t buf_len) |
| { |
| struct ieee80211_frame_addr4 *wh; |
| |
| WMA_LOGD("wow_buf_pkt_len: %u", buf_len); |
| wh = (struct ieee80211_frame_addr4 *) |
| (wow_packet_buffer); |
| if (buf_len >= sizeof(struct ieee80211_frame)) { |
| uint8_t to_from_ds, frag_num; |
| uint32_t seq_num; |
| |
| WMA_LOGE("RA: " MAC_ADDRESS_STR " TA: " MAC_ADDRESS_STR, |
| MAC_ADDR_ARRAY(wh->i_addr1), |
| MAC_ADDR_ARRAY(wh->i_addr2)); |
| |
| WMA_LOGE("TO_DS: %u, FROM_DS: %u", |
| wh->i_fc[1] & IEEE80211_FC1_DIR_TODS, |
| wh->i_fc[1] & IEEE80211_FC1_DIR_FROMDS); |
| |
| to_from_ds = wh->i_fc[1] & IEEE80211_FC1_DIR_DSTODS; |
| |
| switch (to_from_ds) { |
| case IEEE80211_NO_DS: |
| WMA_LOGE("BSSID: " MAC_ADDRESS_STR, |
| MAC_ADDR_ARRAY(wh->i_addr3)); |
| break; |
| case IEEE80211_TO_DS: |
| WMA_LOGE("DA: " MAC_ADDRESS_STR, |
| MAC_ADDR_ARRAY(wh->i_addr3)); |
| break; |
| case IEEE80211_FROM_DS: |
| WMA_LOGE("SA: " MAC_ADDRESS_STR, |
| MAC_ADDR_ARRAY(wh->i_addr3)); |
| break; |
| case IEEE80211_DS_TO_DS: |
| if (buf_len >= sizeof(struct ieee80211_frame_addr4)) |
| WMA_LOGE("DA: " MAC_ADDRESS_STR " SA: " |
| MAC_ADDRESS_STR, |
| MAC_ADDR_ARRAY(wh->i_addr3), |
| MAC_ADDR_ARRAY(wh->i_addr4)); |
| break; |
| } |
| |
| seq_num = (((*(uint16_t *)wh->i_seq) & |
| IEEE80211_SEQ_SEQ_MASK) >> |
| IEEE80211_SEQ_SEQ_SHIFT); |
| frag_num = (((*(uint16_t *)wh->i_seq) & |
| IEEE80211_SEQ_FRAG_MASK) >> |
| IEEE80211_SEQ_FRAG_SHIFT); |
| |
| WMA_LOGE("SEQ_NUM: %u, FRAG_NUM: %u", |
| seq_num, frag_num); |
| } else { |
| WMA_LOGE("Insufficient buffer length for mgmt. packet"); |
| } |
| } |
| |
| /** |
| * wma_acquire_wakelock() - conditionally aquires a wakelock base on wake reason |
| * @wma: the wma handle with the wakelocks to aquire |
| * @wake_reason: wow wakeup reason |
| * |
| * Return: None |
| */ |
| static void wma_acquire_wow_wakelock(t_wma_handle *wma, int wake_reason) |
| { |
| qdf_wake_lock_t *wl; |
| uint32_t ms; |
| |
| switch (wake_reason) { |
| case WOW_REASON_AUTH_REQ_RECV: |
| wl = &wma->wow_wake_lock; |
| ms = WMA_AUTH_REQ_RECV_WAKE_LOCK_TIMEOUT; |
| break; |
| case WOW_REASON_ASSOC_REQ_RECV: |
| wl = &wma->wow_wake_lock; |
| ms = WMA_ASSOC_REQ_RECV_WAKE_LOCK_DURATION; |
| break; |
| case WOW_REASON_DEAUTH_RECVD: |
| wl = &wma->wow_wake_lock; |
| ms = WMA_DEAUTH_RECV_WAKE_LOCK_DURATION; |
| break; |
| case WOW_REASON_DISASSOC_RECVD: |
| wl = &wma->wow_wake_lock; |
| ms = WMA_DISASSOC_RECV_WAKE_LOCK_DURATION; |
| break; |
| case WOW_REASON_AP_ASSOC_LOST: |
| wl = &wma->wow_wake_lock; |
| ms = WMA_BMISS_EVENT_WAKE_LOCK_DURATION; |
| break; |
| #ifdef FEATURE_WLAN_AUTO_SHUTDOWN |
| case WOW_REASON_HOST_AUTO_SHUTDOWN: |
| wl = &wma->wow_wake_lock; |
| ms = WMA_AUTO_SHUTDOWN_WAKE_LOCK_DURATION; |
| break; |
| #endif |
| case WOW_REASON_ROAM_HO: |
| wl = &wma->wow_wake_lock; |
| ms = WMA_ROAM_HO_WAKE_LOCK_DURATION; |
| break; |
| default: |
| return; |
| } |
| |
| WMA_LOGA("Holding %d msec wake_lock", ms); |
| cds_host_diag_log_work(wl, ms, WIFI_POWER_EVENT_WAKELOCK_WOW); |
| qdf_wake_lock_timeout_acquire(wl, ms); |
| } |
| |
| /** |
| * wma_wake_reason_ap_assoc_lost() - WOW_REASON_AP_ASSOC_LOST handler |
| * @wma: Pointer to wma handle |
| * @event: pointer to piggybacked WMI_ROAM_EVENTID_param_tlvs buffer |
| * @len: length of the event buffer |
| * |
| * Return: Errno |
| */ |
| static int |
| wma_wake_reason_ap_assoc_lost(t_wma_handle *wma, void *event, uint32_t len) |
| { |
| WMI_ROAM_EVENTID_param_tlvs *event_param; |
| wmi_roam_event_fixed_param *roam_event; |
| |
| event_param = event; |
| if (!event_param) { |
| WMA_LOGE("AP Assoc Lost event data is null"); |
| return -EINVAL; |
| } |
| |
| roam_event = event_param->fixed_param; |
| WMA_LOGA(FL("Beacon miss indication on vdev %d"), roam_event->vdev_id); |
| |
| wma_beacon_miss_handler(wma, roam_event->vdev_id, roam_event->rssi); |
| |
| return 0; |
| } |
| |
| static const char *wma_vdev_type_str(uint32_t vdev_type) |
| { |
| switch (vdev_type) { |
| case WMI_VDEV_TYPE_AP: |
| return "AP"; |
| case WMI_VDEV_TYPE_STA: |
| return "STA"; |
| case WMI_VDEV_TYPE_IBSS: |
| return "IBSS"; |
| case WMI_VDEV_TYPE_MONITOR: |
| return "MONITOR"; |
| case WMI_VDEV_TYPE_NAN: |
| return "NAN"; |
| case WMI_VDEV_TYPE_OCB: |
| return "OCB"; |
| case WMI_VDEV_TYPE_NDI: |
| return "NDI"; |
| default: |
| return "unknown"; |
| } |
| } |
| |
| static int wma_wake_event_packet( |
| t_wma_handle *wma, |
| WMI_WOW_WAKEUP_HOST_EVENTID_param_tlvs *event_param, |
| uint32_t length) |
| { |
| WOW_EVENT_INFO_fixed_param *wake_info; |
| struct wma_txrx_node *vdev; |
| uint8_t *packet; |
| uint32_t packet_len; |
| |
| /* first 4 bytes are the length, followed by the buffer */ |
| packet_len = *(uint32_t *)event_param->wow_packet_buffer; |
| packet = event_param->wow_packet_buffer + 4; |
| |
| if (!packet_len) { |
| WMA_LOGE("Wake event packet is empty"); |
| return 0; |
| } |
| |
| wake_info = event_param->fixed_param; |
| |
| switch (wake_info->wake_reason) { |
| case WOW_REASON_AUTH_REQ_RECV: |
| case WOW_REASON_ASSOC_REQ_RECV: |
| case WOW_REASON_DEAUTH_RECVD: |
| case WOW_REASON_DISASSOC_RECVD: |
| case WOW_REASON_ASSOC_RES_RECV: |
| case WOW_REASON_REASSOC_REQ_RECV: |
| case WOW_REASON_REASSOC_RES_RECV: |
| case WOW_REASON_BEACON_RECV: |
| case WOW_REASON_ACTION_FRAME_RECV: |
| /* management frame case */ |
| wma_wow_dump_mgmt_buffer(packet, packet_len); |
| break; |
| |
| case WOW_REASON_BPF_ALLOW: |
| case WOW_REASON_PATTERN_MATCH_FOUND: |
| case WOW_REASON_RA_MATCH: |
| case WOW_REASON_RECV_MAGIC_PATTERN: |
| WMA_LOGD("Wake event packet:"); |
| qdf_trace_hex_dump(QDF_MODULE_ID_WMA, QDF_TRACE_LEVEL_DEBUG, |
| packet, packet_len); |
| |
| vdev = &wma->interfaces[wake_info->vdev_id]; |
| wma_wow_parse_data_pkt(&vdev->wow_stats, packet, packet_len); |
| break; |
| |
| default: |
| WMA_LOGE("Wake reason %s(%u) is not a packet event", |
| wma_wow_wake_reason_str(wake_info->wake_reason), |
| wake_info->wake_reason); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int wma_wake_event_no_payload( |
| t_wma_handle *wma, |
| WMI_WOW_WAKEUP_HOST_EVENTID_param_tlvs *event_param, |
| uint32_t length) |
| { |
| WOW_EVENT_INFO_fixed_param *wake_info = event_param->fixed_param; |
| |
| switch (wake_info->wake_reason) { |
| case WOW_REASON_HOST_AUTO_SHUTDOWN: |
| return wma_wake_reason_auto_shutdown(); |
| |
| case WOW_REASON_NLOD: |
| return wma_wake_reason_nlod(wma, wake_info->vdev_id); |
| |
| default: |
| return 0; |
| } |
| } |
| |
| static int wma_wake_event_piggybacked( |
| t_wma_handle *wma, |
| WMI_WOW_WAKEUP_HOST_EVENTID_param_tlvs *event_param, |
| uint32_t length) |
| { |
| int errno = 0; |
| void *pb_event; |
| uint32_t pb_event_len; |
| uint32_t wake_reason; |
| uint32_t event_id; |
| |
| /* |
| * There are "normal" cases where a wake reason that usually contains a |
| * piggybacked event is empty. In these cases we just want to wake up, |
| * and no action is needed. Bail out now if that is the case. |
| */ |
| if (!event_param->wow_packet_buffer) |
| return 0; |
| |
| wake_reason = event_param->fixed_param->wake_reason; |
| |
| /* parse piggybacked event from param buffer */ |
| { |
| int ret_code; |
| uint8_t *pb_event_buf; |
| uint32_t tag; |
| |
| /* first 4 bytes are the length, followed by the buffer */ |
| pb_event_len = *(uint32_t *)event_param->wow_packet_buffer; |
| pb_event_buf = event_param->wow_packet_buffer + 4; |
| |
| WMA_LOGD("piggybacked event buffer:"); |
| qdf_trace_hex_dump(QDF_MODULE_ID_WMA, QDF_TRACE_LEVEL_DEBUG, |
| pb_event_buf, pb_event_len); |
| |
| tag = WMITLV_GET_TLVTAG(WMITLV_GET_HDR(pb_event_buf)); |
| event_id = wow_get_wmi_eventid(wake_reason, tag); |
| if (!event_id) { |
| WMA_LOGE(FL("Unable to find Event Id")); |
| return -EINVAL; |
| } |
| |
| ret_code = wmitlv_check_and_pad_event_tlvs(wma, pb_event_buf, |
| pb_event_len, |
| event_id, &pb_event); |
| if (ret_code) { |
| WMA_LOGE(FL("Bad TLVs; len:%d, event_id:%d, status:%d"), |
| pb_event_len, event_id, ret_code); |
| return -EINVAL; |
| } |
| } |
| |
| switch (wake_reason) { |
| case WOW_REASON_AP_ASSOC_LOST: |
| errno = wma_wake_reason_ap_assoc_lost(wma, pb_event, |
| pb_event_len); |
| break; |
| |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| case WOW_REASON_NLO_SCAN_COMPLETE: |
| errno = target_if_nlo_complete_handler(wma, pb_event, |
| pb_event_len); |
| break; |
| #endif /* FEATURE_WLAN_SCAN_PNO */ |
| |
| case WOW_REASON_CSA_EVENT: |
| errno = wma_csa_offload_handler(wma, pb_event, pb_event_len); |
| break; |
| |
| /* |
| * WOW_REASON_LOW_RSSI is used for following roaming events - |
| * WMI_ROAM_REASON_BETTER_AP, WMI_ROAM_REASON_BMISS, |
| * WMI_ROAM_REASON_SUITABLE_AP will be handled by |
| * wma_roam_event_callback(). |
| * WOW_REASON_ROAM_HO is associated with |
| * WMI_ROAM_REASON_HO_FAILED event and it will be handled by |
| * wma_roam_event_callback(). |
| */ |
| case WOW_REASON_LOW_RSSI: |
| case WOW_REASON_ROAM_HO: |
| if (pb_event_len > 0) { |
| errno = wma_roam_event_callback(wma, pb_event, |
| pb_event_len); |
| } else { |
| /* |
| * No wow_packet_buffer means a better AP beacon |
| * will follow in a later event. |
| */ |
| WMA_LOGD("Host woken up because of better AP beacon"); |
| } |
| break; |
| |
| case WOW_REASON_CLIENT_KICKOUT_EVENT: |
| errno = wma_peer_sta_kickout_event_handler(wma, pb_event, |
| pb_event_len); |
| break; |
| |
| #ifdef FEATURE_WLAN_EXTSCAN |
| case WOW_REASON_EXTSCAN: |
| errno = wma_extscan_wow_event_callback(wma, pb_event, |
| pb_event_len); |
| break; |
| #endif |
| |
| case WOW_REASON_RSSI_BREACH_EVENT: |
| errno = wma_rssi_breached_event_handler(wma, pb_event, |
| pb_event_len); |
| break; |
| |
| case WOW_REASON_NAN_EVENT: |
| errno = wma_nan_rsp_event_handler(wma, pb_event, pb_event_len); |
| break; |
| |
| case WOW_REASON_NAN_DATA: |
| errno = wma_ndp_wow_event_callback(wma, pb_event, pb_event_len, |
| event_id); |
| break; |
| |
| #ifdef FEATURE_WLAN_TDLS |
| case WOW_REASON_TDLS_CONN_TRACKER_EVENT: |
| errno = wma_tdls_event_handler(wma, pb_event, pb_event_len); |
| break; |
| #endif |
| default: |
| WMA_LOGE("Wake reason %s(%u) is not a piggybacked event", |
| wma_wow_wake_reason_str(wake_reason), wake_reason); |
| errno = -EINVAL; |
| break; |
| } |
| |
| wmitlv_free_allocated_event_tlvs(event_id, &pb_event); |
| |
| return errno; |
| } |
| |
| static void wma_wake_event_log_reason(t_wma_handle *wma, |
| WOW_EVENT_INFO_fixed_param *wake_info) |
| { |
| struct wma_txrx_node *vdev; |
| |
| /* "Unspecified" means APPS triggered wake, else firmware triggered */ |
| if (wake_info->wake_reason != WOW_REASON_UNSPECIFIED) { |
| vdev = &wma->interfaces[wake_info->vdev_id]; |
| WMA_LOGA("WLAN triggered wakeup: %s (%d), vdev: %d (%s)", |
| wma_wow_wake_reason_str(wake_info->wake_reason), |
| wake_info->wake_reason, |
| wake_info->vdev_id, |
| wma_vdev_type_str(vdev->type)); |
| } else if (!wmi_get_runtime_pm_inprogress(wma->wmi_handle)) { |
| WMA_LOGA("Non-WLAN triggered wakeup: %s (%d)", |
| wma_wow_wake_reason_str(wake_info->wake_reason), |
| wake_info->wake_reason); |
| } |
| |
| qdf_wow_wakeup_host_event(wake_info->wake_reason); |
| } |
| |
| /** |
| * wma_wow_wakeup_host_event() - wakeup host event handler |
| * @handle: wma handle |
| * @event: event data |
| * @len: buffer length |
| * |
| * Handler to catch wow wakeup host event. This event will have |
| * reason why the firmware has woken the host. |
| * |
| * Return: Errno |
| */ |
| int wma_wow_wakeup_host_event(void *handle, uint8_t *event, uint32_t len) |
| { |
| int errno; |
| t_wma_handle *wma = handle; |
| WMI_WOW_WAKEUP_HOST_EVENTID_param_tlvs *event_param; |
| WOW_EVENT_INFO_fixed_param *wake_info; |
| |
| event_param = (WMI_WOW_WAKEUP_HOST_EVENTID_param_tlvs *)event; |
| if (!event_param) { |
| WMA_LOGE("Wake event data is null"); |
| return -EINVAL; |
| } |
| |
| wake_info = event_param->fixed_param; |
| wma_wake_event_log_reason(wma, wake_info); |
| |
| pmo_ucfg_psoc_wakeup_host_event_received(wma->psoc); |
| |
| wma_print_wow_stats(wma, wake_info); |
| |
| /* split based on payload type */ |
| if (is_piggybacked_event(wake_info->wake_reason)) |
| errno = wma_wake_event_piggybacked(wma, event_param, len); |
| else if (event_param->wow_packet_buffer) |
| errno = wma_wake_event_packet(wma, event_param, len); |
| else |
| errno = wma_wake_event_no_payload(wma, event_param, len); |
| |
| wma_inc_wow_stats(wma, wake_info); |
| wma_print_wow_stats(wma, wake_info); |
| |
| wma_acquire_wow_wakelock(wma, wake_info->wake_reason); |
| |
| return errno; |
| } |
| |
| /** |
| * wma_pdev_resume_event_handler() - PDEV resume event handler |
| * @handle: wma handle |
| * @event: event data |
| * @len: buffer length |
| * |
| * Return: 0 for success or error |
| */ |
| int wma_pdev_resume_event_handler(void *handle, uint8_t *event, uint32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| |
| WMA_LOGA("Received PDEV resume event"); |
| |
| pmo_ucfg_psoc_wakeup_host_event_received(wma->psoc); |
| |
| return 0; |
| } |
| /** |
| * wma_set_wow_bus_suspend() - set suspend flag |
| * @wma: wma handle |
| * @val: value |
| * |
| * Return: none |
| */ |
| static inline void wma_set_wow_bus_suspend(tp_wma_handle wma, int val) |
| { |
| qdf_atomic_set(&wma->is_wow_bus_suspended, val); |
| wmi_set_is_wow_bus_suspended(wma->wmi_handle, val); |
| } |
| |
| /** |
| * wma_wow_add_pattern() - add wow pattern in target |
| * @wma: wma handle |
| * @ptrn: wow pattern |
| * |
| * This function does following: |
| * 1) Delete all default patterns of the vdev |
| * 2) Add received wow patterns for given vdev in target. |
| * |
| * Target is responsible for caching wow patterns accross multiple |
| * suspend/resumes until the pattern is deleted by user |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_wow_add_pattern(tp_wma_handle wma, struct wow_add_pattern *ptrn) |
| { |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_wow_delete_user_pattern() - delete user configured wow pattern in target |
| * @wma: wma handle |
| * @ptrn: wow pattern |
| * |
| * This function does following: |
| * 1) Deletes a particular user configured wow pattern in target |
| * 2) After deleting all user wow patterns add default wow patterns |
| * specific to that vdev. |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_wow_delete_user_pattern(tp_wma_handle wma, |
| struct wow_delete_pattern *pattern) |
| { |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_wow_enter() - store enable/disable status for pattern |
| * @wma: wma handle |
| * @info: wow parameters |
| * |
| * Records pattern enable/disable status locally. This choice will |
| * take effect when the driver enter into suspend state. |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_wow_enter(tp_wma_handle wma, tpSirHalWowlEnterParams info) |
| { |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_wow_exit() - clear all wma states |
| * @wma: wma handle |
| * @info: wow params |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_wow_exit(tp_wma_handle wma, tpSirHalWowlExitParams info) |
| { |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_calculate_and_update_conn_state(): calculate each interfaces conn state |
| * @wma: validated wma handle |
| * |
| * Identifies any vdev that is up and not in ap mode as connected. |
| * stores this in the interfaces conn_state varible. |
| */ |
| void wma_calculate_and_update_conn_state(tp_wma_handle wma) |
| { |
| int i; |
| for (i = 0; i < wma->max_bssid; i++) { |
| wma->interfaces[i].conn_state = |
| !!(wma_is_vdev_up(i) && |
| !wma_is_vdev_in_ap_mode(wma, i)); |
| } |
| } |
| |
| /** |
| * wma_update_conn_state(): synchronize wma & hdd |
| * @wma: wma handle |
| * @conn_state: boolean array to populate |
| * @len: validation parameter |
| * |
| * populate interfaces conn_state with true if the interface |
| * is a connected client and wow will configure a pattern. |
| */ |
| void wma_update_conn_state(tp_wma_handle wma, uint32_t conn_mask) |
| { |
| int i; |
| for (i = 0; i < wma->max_bssid; i++) { |
| if (conn_mask & (1 << i)) |
| wma->interfaces[i].conn_state = true; |
| else |
| wma->interfaces[i].conn_state = false; |
| } |
| |
| if (wma->wow.magic_ptrn_enable) |
| return; |
| |
| for (i = 0; i < wma->max_bssid; i++) { |
| if (!wma->interfaces[i].ptrn_match_enable) |
| wma->interfaces[i].conn_state = false; |
| } |
| } |
| |
| /** |
| * wma_del_ts_req() - send DELTS request to fw |
| * @wma: wma handle |
| * @msg: delts params |
| * |
| * Return: none |
| */ |
| void wma_del_ts_req(tp_wma_handle wma, tDelTsParams *msg) |
| { |
| if (wmi_unified_del_ts_cmd(wma->wmi_handle, |
| msg->sessionId, |
| TID_TO_WME_AC(msg->userPrio))) { |
| WMA_LOGP("%s: Failed to send vdev DELTS command", __func__); |
| } |
| |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| if (msg->setRICparams == true) |
| wma_set_ric_req(wma, msg, false); |
| #endif /* WLAN_FEATURE_ROAM_OFFLOAD */ |
| qdf_mem_free(msg); |
| } |
| |
| /** |
| * wma_aggr_qos_req() - send aggr qos request to fw |
| * @wma: handle to wma |
| * @pAggrQosRspMsg - combined struct for all ADD_TS requests. |
| * |
| * A function to handle WMA_AGGR_QOS_REQ. This will send out |
| * ADD_TS requestes to firmware in loop for all the ACs with |
| * active flow. |
| * |
| * Return: none |
| */ |
| void wma_aggr_qos_req(tp_wma_handle wma, |
| tAggrAddTsParams *pAggrQosRspMsg) |
| { |
| wmi_unified_aggr_qos_cmd(wma->wmi_handle, |
| (struct aggr_add_ts_param *)pAggrQosRspMsg); |
| /* send reponse to upper layers from here only. */ |
| wma_send_msg(wma, WMA_AGGR_QOS_RSP, pAggrQosRspMsg, 0); |
| } |
| |
| #ifdef FEATURE_WLAN_ESE |
| /** |
| * wma_set_tsm_interval() - Set TSM interval |
| * @req: pointer to ADDTS request |
| * |
| * Return: QDF_STATUS_E_FAILURE or QDF_STATUS_SUCCESS |
| */ |
| static QDF_STATUS wma_set_tsm_interval(tAddTsParams *req) |
| { |
| /* |
| * msmt_interval is in unit called TU (1 TU = 1024 us) |
| * max value of msmt_interval cannot make resulting |
| * interval_milliseconds overflow 32 bit |
| * |
| */ |
| uint32_t interval_milliseconds; |
| struct cdp_pdev *pdev = cds_get_context(QDF_MODULE_ID_TXRX); |
| |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Failed to get pdev", __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| interval_milliseconds = (req->tsm_interval * 1024) / 1000; |
| |
| cdp_tx_set_compute_interval(cds_get_context(QDF_MODULE_ID_SOC), |
| pdev, |
| interval_milliseconds); |
| return QDF_STATUS_SUCCESS; |
| } |
| #else |
| static inline QDF_STATUS wma_set_tsm_interval(tAddTsParams *req) |
| { |
| return QDF_STATUS_SUCCESS; |
| } |
| #endif /* FEATURE_WLAN_ESE */ |
| |
| /** |
| * wma_add_ts_req() - send ADDTS request to fw |
| * @wma: wma handle |
| * @msg: ADDTS params |
| * |
| * Return: none |
| */ |
| void wma_add_ts_req(tp_wma_handle wma, tAddTsParams *msg) |
| { |
| struct add_ts_param cmd = {0}; |
| |
| msg->status = QDF_STATUS_SUCCESS; |
| if (wma_set_tsm_interval(msg) == QDF_STATUS_SUCCESS) { |
| |
| cmd.sme_session_id = msg->sme_session_id; |
| cmd.tspec.tsinfo.traffic.userPrio = |
| TID_TO_WME_AC(msg->tspec.tsinfo.traffic.userPrio); |
| cmd.tspec.mediumTime = msg->tspec.mediumTime; |
| if (wmi_unified_add_ts_cmd(wma->wmi_handle, &cmd)) |
| msg->status = QDF_STATUS_E_FAILURE; |
| |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| if (msg->setRICparams == true) |
| wma_set_ric_req(wma, msg, true); |
| #endif /* WLAN_FEATURE_ROAM_OFFLOAD */ |
| |
| } |
| wma_send_msg(wma, WMA_ADD_TS_RSP, msg, 0); |
| } |
| |
| #ifdef FEATURE_WLAN_ESE |
| |
| #define TSM_DELAY_HISTROGRAM_BINS 4 |
| /** |
| * wma_process_tsm_stats_req() - process tsm stats request |
| * @wma_handler - handle to wma |
| * @pTsmStatsMsg - TSM stats struct that needs to be populated and |
| * passed in message. |
| * |
| * A parallel function to WMA_ProcessTsmStatsReq for pronto. This |
| * function fetches stats from data path APIs and post |
| * WMA_TSM_STATS_RSP msg back to LIM. |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_process_tsm_stats_req(tp_wma_handle wma_handler, |
| void *pTsmStatsMsg) |
| { |
| uint8_t counter; |
| uint32_t queue_delay_microsec = 0; |
| uint32_t tx_delay_microsec = 0; |
| uint16_t packet_count = 0; |
| uint16_t packet_loss_count = 0; |
| tpAniTrafStrmMetrics pTsmMetric = NULL; |
| tpAniGetTsmStatsReq pStats = (tpAniGetTsmStatsReq) pTsmStatsMsg; |
| tpAniGetTsmStatsRsp pTsmRspParams = NULL; |
| int tid = pStats->tid; |
| /* |
| * The number of histrogram bin report by data path api are different |
| * than required by TSM, hence different (6) size array used |
| */ |
| uint16_t bin_values[QCA_TX_DELAY_HIST_REPORT_BINS] = { 0, }; |
| struct cdp_pdev *pdev = cds_get_context(QDF_MODULE_ID_TXRX); |
| void *soc = cds_get_context(QDF_MODULE_ID_SOC); |
| |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Failed to get pdev", __func__); |
| qdf_mem_free(pTsmStatsMsg); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| /* get required values from data path APIs */ |
| cdp_tx_delay(soc, |
| pdev, |
| &queue_delay_microsec, |
| &tx_delay_microsec, tid); |
| cdp_tx_delay_hist(soc, |
| pdev, |
| bin_values, tid); |
| cdp_tx_packet_count(soc, |
| pdev, |
| &packet_count, |
| &packet_loss_count, tid); |
| |
| pTsmRspParams = qdf_mem_malloc(sizeof(*pTsmRspParams)); |
| if (NULL == pTsmRspParams) { |
| QDF_TRACE(QDF_MODULE_ID_WMA, QDF_TRACE_LEVEL_ERROR, |
| "%s: QDF MEM Alloc Failure", __func__); |
| QDF_ASSERT(0); |
| qdf_mem_free(pTsmStatsMsg); |
| return QDF_STATUS_E_NOMEM; |
| } |
| pTsmRspParams->staId = pStats->staId; |
| pTsmRspParams->rc = eSIR_FAILURE; |
| pTsmRspParams->tsmStatsReq = pStats; |
| pTsmMetric = &pTsmRspParams->tsmMetrics; |
| /* populate pTsmMetric */ |
| pTsmMetric->UplinkPktQueueDly = queue_delay_microsec; |
| /* store only required number of bin values */ |
| for (counter = 0; counter < TSM_DELAY_HISTROGRAM_BINS; counter++) { |
| pTsmMetric->UplinkPktQueueDlyHist[counter] = |
| bin_values[counter]; |
| } |
| pTsmMetric->UplinkPktTxDly = tx_delay_microsec; |
| pTsmMetric->UplinkPktLoss = packet_loss_count; |
| pTsmMetric->UplinkPktCount = packet_count; |
| |
| /* |
| * No need to populate roaming delay and roaming count as they are |
| * being populated just before sending IAPP frame out |
| */ |
| /* post this message to LIM/PE */ |
| wma_send_msg(wma_handler, WMA_TSM_STATS_RSP, (void *)pTsmRspParams, 0); |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| #endif /* FEATURE_WLAN_ESE */ |
| |
| /** |
| * wma_process_mcbc_set_filter_req() - process mcbc set filter request |
| * @wma_handle: wma handle |
| * @mcbc_param: mcbc params |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_process_mcbc_set_filter_req(tp_wma_handle wma_handle, |
| tSirRcvFltMcAddrList *mcbc_param) |
| { |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_process_cesium_enable_ind() - enables cesium functionality in target |
| * @wma: wma handle |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_process_cesium_enable_ind(tp_wma_handle wma) |
| { |
| QDF_STATUS ret; |
| int32_t vdev_id; |
| |
| vdev_id = wma_find_vdev_by_type(wma, WMI_VDEV_TYPE_IBSS); |
| if (vdev_id < 0) { |
| WMA_LOGE("%s: IBSS vdev does not exist could not enable cesium", |
| __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /* Send enable cesium command to target */ |
| WMA_LOGE("Enable cesium in target for vdevId %d ", vdev_id); |
| ret = wma_vdev_set_param(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_ENABLE_RMC, 1); |
| if (ret) { |
| WMA_LOGE("Enable cesium failed for vdevId %d", vdev_id); |
| return QDF_STATUS_E_FAILURE; |
| } |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_process_get_peer_info_req() - sends get peer info cmd to target |
| * @wma: wma handle |
| * @preq: get peer info request |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_process_get_peer_info_req |
| (tp_wma_handle wma, tSirIbssGetPeerInfoReqParams *pReq) |
| { |
| int32_t ret; |
| uint8_t *p; |
| uint16_t len; |
| wmi_buf_t buf; |
| int32_t vdev_id; |
| struct cdp_pdev *pdev; |
| void *peer; |
| void *soc = cds_get_context(QDF_MODULE_ID_SOC); |
| uint8_t peer_mac[IEEE80211_ADDR_LEN]; |
| uint8_t *peer_mac_raw; |
| wmi_peer_info_req_cmd_fixed_param *p_get_peer_info_cmd; |
| uint8_t bcast_mac[IEEE80211_ADDR_LEN] = { 0xff, 0xff, 0xff, |
| 0xff, 0xff, 0xff }; |
| |
| if (NULL == soc) { |
| WMA_LOGE("%s: SOC context is NULL", __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| vdev_id = wma_find_vdev_by_type(wma, WMI_VDEV_TYPE_IBSS); |
| if (vdev_id < 0) { |
| WMA_LOGE("%s: IBSS vdev does not exist could not get peer info", |
| __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| pdev = cds_get_context(QDF_MODULE_ID_TXRX); |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Failed to get pdev context", __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| if (0xFF == pReq->staIdx) { |
| /*get info for all peers */ |
| qdf_mem_copy(peer_mac, bcast_mac, IEEE80211_ADDR_LEN); |
| } else { |
| /*get info for a single peer */ |
| peer = cdp_peer_find_by_local_id(soc, |
| pdev, pReq->staIdx); |
| if (!peer) { |
| WMA_LOGE("%s: Failed to get peer handle using peer id %d", |
| __func__, pReq->staIdx); |
| return QDF_STATUS_E_FAILURE; |
| } |
| peer_mac_raw = cdp_peer_get_peer_mac_addr(soc, peer); |
| if (peer_mac_raw == NULL) { |
| WMA_LOGE("peer_mac_raw is NULL"); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGE("%s: staIdx %d peer mac: 0x%2x:0x%2x:0x%2x:0x%2x:0x%2x:0x%2x", |
| __func__, pReq->staIdx, peer_mac_raw[0], |
| peer_mac_raw[1], peer_mac_raw[2], |
| peer_mac_raw[3], peer_mac_raw[4], |
| peer_mac_raw[5]); |
| qdf_mem_copy(peer_mac, peer_mac_raw, IEEE80211_ADDR_LEN); |
| } |
| |
| len = sizeof(wmi_peer_info_req_cmd_fixed_param); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s %d: No WMI resource!", __func__, __LINE__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| p = (uint8_t *) wmi_buf_data(buf); |
| qdf_mem_zero(p, len); |
| p_get_peer_info_cmd = (wmi_peer_info_req_cmd_fixed_param *) p; |
| |
| WMITLV_SET_HDR(&p_get_peer_info_cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_peer_info_req_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN |
| (wmi_peer_info_req_cmd_fixed_param)); |
| |
| p_get_peer_info_cmd->vdev_id = vdev_id; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(peer_mac, |
| &p_get_peer_info_cmd->peer_mac_address); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_PEER_INFO_REQ_CMDID); |
| if (ret != QDF_STATUS_SUCCESS) |
| wmi_buf_free(buf); |
| |
| WMA_LOGE("IBSS get peer info cmd sent len: %d, vdev %d command id: %d, status: %d", |
| len, vdev_id, WMI_PEER_INFO_REQ_CMDID, ret); |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_process_tx_fail_monitor_ind() - sends tx fail monitor cmd to target |
| * @wma: wma handle |
| * @pReq: tx fail monitor command params |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_process_tx_fail_monitor_ind(tp_wma_handle wma, |
| tAniTXFailMonitorInd *pReq) |
| { |
| QDF_STATUS ret; |
| int32_t vdev_id; |
| |
| vdev_id = wma_find_vdev_by_type(wma, WMI_VDEV_TYPE_IBSS); |
| if (vdev_id < 0) { |
| WMA_LOGE("%s: IBSS vdev does not exist could not send fast tx fail monitor indication message to target", |
| __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /* Send enable cesium command to target */ |
| WMA_LOGE("send fast tx fail monitor ind cmd target for vdevId %d val %d", |
| vdev_id, pReq->tx_fail_count); |
| |
| if (pReq->tx_fail_count == 0) |
| wma->hddTxFailCb = NULL; |
| else |
| wma->hddTxFailCb = pReq->txFailIndCallback; |
| ret = wma_vdev_set_param(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_SET_IBSS_TX_FAIL_CNT_THR, |
| pReq->tx_fail_count); |
| if (ret) { |
| WMA_LOGE("tx fail monitor failed for vdevId %d", vdev_id); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_process_rmc_enable_ind() - enables RMC functionality in target |
| * @wma: wma handle |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_process_rmc_enable_ind(tp_wma_handle wma) |
| { |
| int ret; |
| uint8_t *p; |
| uint16_t len; |
| wmi_buf_t buf; |
| int32_t vdev_id; |
| wmi_rmc_set_mode_cmd_fixed_param *p_rmc_enable_cmd; |
| |
| vdev_id = wma_find_vdev_by_type(wma, WMI_VDEV_TYPE_IBSS); |
| if (vdev_id < 0) { |
| WMA_LOGE("%s: IBSS vdev does not exist could not enable RMC", |
| __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| len = sizeof(wmi_rmc_set_mode_cmd_fixed_param); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s %d: No WMI resource!", __func__, __LINE__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| p = (uint8_t *) wmi_buf_data(buf); |
| qdf_mem_zero(p, len); |
| p_rmc_enable_cmd = (wmi_rmc_set_mode_cmd_fixed_param *) p; |
| |
| WMITLV_SET_HDR(&p_rmc_enable_cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_rmc_set_mode_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN |
| (wmi_rmc_set_mode_cmd_fixed_param)); |
| |
| p_rmc_enable_cmd->vdev_id = vdev_id; |
| p_rmc_enable_cmd->enable_rmc = WMI_RMC_MODE_ENABLED; |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_RMC_SET_MODE_CMDID); |
| if (ret != QDF_STATUS_SUCCESS) |
| wmi_buf_free(buf); |
| |
| WMA_LOGE("Enable RMC cmd sent len: %d, vdev %d command id: %d, status: %d", |
| len, vdev_id, WMI_RMC_SET_MODE_CMDID, ret); |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_process_rmc_disable_ind() - disables rmc functionality in target |
| * @wma: wma handle |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_process_rmc_disable_ind(tp_wma_handle wma) |
| { |
| int ret; |
| uint8_t *p; |
| uint16_t len; |
| wmi_buf_t buf; |
| int32_t vdev_id; |
| wmi_rmc_set_mode_cmd_fixed_param *p_rmc_disable_cmd; |
| |
| vdev_id = wma_find_vdev_by_type(wma, WMI_VDEV_TYPE_IBSS); |
| if (vdev_id < 0) { |
| WMA_LOGE("%s: IBSS vdev does not exist could not disable RMC", |
| __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| len = sizeof(wmi_rmc_set_mode_cmd_fixed_param); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s %d: No WMI resource!", __func__, __LINE__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| p = (uint8_t *) wmi_buf_data(buf); |
| qdf_mem_zero(p, len); |
| p_rmc_disable_cmd = (wmi_rmc_set_mode_cmd_fixed_param *) p; |
| |
| WMITLV_SET_HDR(&p_rmc_disable_cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_rmc_set_mode_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN |
| (wmi_rmc_set_mode_cmd_fixed_param)); |
| |
| p_rmc_disable_cmd->vdev_id = vdev_id; |
| p_rmc_disable_cmd->enable_rmc = WMI_RMC_MODE_DISABLED; |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_RMC_SET_MODE_CMDID); |
| if (ret != QDF_STATUS_SUCCESS) |
| wmi_buf_free(buf); |
| |
| WMA_LOGE("Disable RMC cmd sent len: %d, vdev %d command id: %d, status: %d", |
| len, vdev_id, WMI_RMC_SET_MODE_CMDID, ret); |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_process_rmc_action_period_ind() - sends RMC action period to target |
| * @wma: wma handle |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_process_rmc_action_period_ind(tp_wma_handle wma) |
| { |
| int ret; |
| uint8_t *p; |
| uint16_t len; |
| uint32_t periodicity_msec; |
| wmi_buf_t buf; |
| int32_t vdev_id; |
| wmi_rmc_set_action_period_cmd_fixed_param *p_rmc_cmd; |
| struct sAniSirGlobal *mac = cds_get_context(QDF_MODULE_ID_PE); |
| |
| if (NULL == mac) { |
| WMA_LOGE("%s: MAC mac does not exist", __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| vdev_id = wma_find_vdev_by_type(wma, WMI_VDEV_TYPE_IBSS); |
| if (vdev_id < 0) { |
| WMA_LOGE("%s: IBSS vdev does not exist could not send RMC action period to target", |
| __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| len = sizeof(wmi_rmc_set_action_period_cmd_fixed_param); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s %d: No WMI resource!", __func__, __LINE__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| p = (uint8_t *) wmi_buf_data(buf); |
| qdf_mem_zero(p, len); |
| p_rmc_cmd = (wmi_rmc_set_action_period_cmd_fixed_param *) p; |
| |
| WMITLV_SET_HDR(&p_rmc_cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_rmc_set_action_period_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN |
| (wmi_rmc_set_action_period_cmd_fixed_param)); |
| |
| if (wlan_cfg_get_int(mac, WNI_CFG_RMC_ACTION_PERIOD_FREQUENCY, |
| &periodicity_msec) != eSIR_SUCCESS) { |
| WMA_LOGE("Failed to get value for RMC action period using default"); |
| periodicity_msec = WNI_CFG_RMC_ACTION_PERIOD_FREQUENCY_STADEF; |
| } |
| |
| p_rmc_cmd->vdev_id = vdev_id; |
| p_rmc_cmd->periodicity_msec = periodicity_msec; |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_RMC_SET_ACTION_PERIOD_CMDID); |
| if (ret != QDF_STATUS_SUCCESS) |
| wmi_buf_free(buf); |
| |
| WMA_LOGE("RMC action period %d cmd sent len: %d, vdev %d command id: %d, status: %d", |
| periodicity_msec, len, vdev_id, WMI_RMC_SET_ACTION_PERIOD_CMDID, |
| ret); |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_process_add_periodic_tx_ptrn_ind - add periodic tx ptrn |
| * @handle: wma handle |
| * @pAddPeriodicTxPtrnParams: tx ptrn params |
| * |
| * Retrun: QDF status |
| */ |
| QDF_STATUS wma_process_add_periodic_tx_ptrn_ind(WMA_HANDLE handle, |
| tSirAddPeriodicTxPtrn * |
| pAddPeriodicTxPtrnParams) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| struct periodic_tx_pattern *params_ptr; |
| uint8_t vdev_id; |
| QDF_STATUS status; |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue fw add pattern cmd", |
| __func__); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| params_ptr = qdf_mem_malloc(sizeof(*params_ptr)); |
| |
| if (!params_ptr) { |
| WMA_LOGE( |
| "%s: unable to allocate memory for periodic_tx_pattern", |
| __func__); |
| return QDF_STATUS_E_NOMEM; |
| } |
| |
| if (!wma_find_vdev_by_addr(wma_handle, |
| pAddPeriodicTxPtrnParams->mac_address.bytes, |
| &vdev_id)) { |
| WMA_LOGE("%s: Failed to find vdev id for %pM", __func__, |
| pAddPeriodicTxPtrnParams->mac_address.bytes); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| params_ptr->ucPtrnId = pAddPeriodicTxPtrnParams->ucPtrnId; |
| params_ptr->ucPtrnSize = pAddPeriodicTxPtrnParams->ucPtrnSize; |
| params_ptr->usPtrnIntervalMs = |
| pAddPeriodicTxPtrnParams->usPtrnIntervalMs; |
| qdf_mem_copy(¶ms_ptr->mac_address, |
| &pAddPeriodicTxPtrnParams->mac_address, |
| sizeof(struct qdf_mac_addr)); |
| qdf_mem_copy(params_ptr->ucPattern, |
| pAddPeriodicTxPtrnParams->ucPattern, |
| params_ptr->ucPtrnSize); |
| |
| status = wmi_unified_process_add_periodic_tx_ptrn_cmd( |
| wma_handle->wmi_handle, params_ptr, vdev_id); |
| |
| qdf_mem_free(params_ptr); |
| return status; |
| } |
| |
| /** |
| * wma_process_del_periodic_tx_ptrn_ind - del periodic tx ptrn |
| * @handle: wma handle |
| * @pDelPeriodicTxPtrnParams: tx ptrn params |
| * |
| * Retrun: QDF status |
| */ |
| QDF_STATUS wma_process_del_periodic_tx_ptrn_ind(WMA_HANDLE handle, |
| tSirDelPeriodicTxPtrn * |
| pDelPeriodicTxPtrnParams) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| uint8_t vdev_id; |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue Del Pattern cmd", |
| __func__); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| if (!wma_find_vdev_by_addr(wma_handle, |
| pDelPeriodicTxPtrnParams->mac_address.bytes, |
| &vdev_id)) { |
| WMA_LOGE("%s: Failed to find vdev id for %pM", __func__, |
| pDelPeriodicTxPtrnParams->mac_address.bytes); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| return wmi_unified_process_del_periodic_tx_ptrn_cmd( |
| wma_handle->wmi_handle, vdev_id, |
| pDelPeriodicTxPtrnParams->ucPtrnId); |
| } |
| |
| #ifdef WLAN_FEATURE_STATS_EXT |
| /** |
| * wma_stats_ext_req() - request ext stats from fw |
| * @wma_ptr: wma handle |
| * @preq: stats ext params |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_stats_ext_req(void *wma_ptr, tpStatsExtRequest preq) |
| { |
| tp_wma_handle wma = (tp_wma_handle) wma_ptr; |
| struct stats_ext_params *params; |
| size_t params_len; |
| QDF_STATUS status; |
| |
| if (!wma) { |
| WMA_LOGE("%s: wma handle is NULL", __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| params_len = sizeof(*params) + preq->request_data_len; |
| params = qdf_mem_malloc(params_len); |
| |
| if (params == NULL) { |
| WMA_LOGE(FL("memory allocation failed")); |
| return QDF_STATUS_E_NOMEM; |
| } |
| |
| params->vdev_id = preq->vdev_id; |
| params->request_data_len = preq->request_data_len; |
| if (preq->request_data_len > 0) |
| qdf_mem_copy(params->request_data, preq->request_data, |
| params->request_data_len); |
| |
| status = wmi_unified_stats_ext_req_cmd(wma->wmi_handle, params); |
| qdf_mem_free(params); |
| |
| return status; |
| } |
| |
| #endif /* WLAN_FEATURE_STATS_EXT */ |
| |
| #ifdef WLAN_FEATURE_EXTWOW_SUPPORT |
| /** |
| * wma_send_status_of_ext_wow() - send ext wow status to SME |
| * @wma: wma handle |
| * @status: status |
| * |
| * Return: none |
| */ |
| static void wma_send_status_of_ext_wow(tp_wma_handle wma, bool status) |
| { |
| tSirReadyToExtWoWInd *ready_to_extwow; |
| QDF_STATUS vstatus; |
| struct scheduler_msg message = {0}; |
| uint8_t len; |
| |
| WMA_LOGD("Posting ready to suspend indication to umac"); |
| |
| len = sizeof(tSirReadyToExtWoWInd); |
| ready_to_extwow = (tSirReadyToExtWoWInd *) qdf_mem_malloc(len); |
| |
| if (NULL == ready_to_extwow) { |
| WMA_LOGE("%s: Memory allocation failure", __func__); |
| return; |
| } |
| |
| ready_to_extwow->mesgType = eWNI_SME_READY_TO_EXTWOW_IND; |
| ready_to_extwow->mesgLen = len; |
| ready_to_extwow->status = status; |
| |
| message.type = eWNI_SME_READY_TO_EXTWOW_IND; |
| message.bodyptr = (void *)ready_to_extwow; |
| message.bodyval = 0; |
| |
| vstatus = scheduler_post_msg(QDF_MODULE_ID_SME, &message); |
| if (vstatus != QDF_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to post ready to suspend"); |
| qdf_mem_free(ready_to_extwow); |
| } |
| } |
| |
| /** |
| * wma_enable_ext_wow() - enable ext wow in fw |
| * @wma: wma handle |
| * @params: ext wow params |
| * |
| * Return:0 for success or error code |
| */ |
| QDF_STATUS wma_enable_ext_wow(tp_wma_handle wma, tpSirExtWoWParams params) |
| { |
| struct ext_wow_params wow_params = {0}; |
| QDF_STATUS status; |
| |
| if (!wma) { |
| WMA_LOGE("%s: wma handle is NULL", __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| wow_params.vdev_id = params->vdev_id; |
| wow_params.type = (enum wmi_ext_wow_type) params->type; |
| wow_params.wakeup_pin_num = params->wakeup_pin_num; |
| |
| status = wmi_unified_enable_ext_wow_cmd(wma->wmi_handle, |
| &wow_params); |
| if (QDF_IS_STATUS_ERROR(status)) |
| return status; |
| |
| wma_send_status_of_ext_wow(wma, true); |
| return status; |
| |
| } |
| |
| /** |
| * wma_set_app_type1_params_in_fw() - set app type1 params in fw |
| * @wma: wma handle |
| * @appType1Params: app type1 params |
| * |
| * Return: QDF status |
| */ |
| int wma_set_app_type1_params_in_fw(tp_wma_handle wma, |
| tpSirAppType1Params appType1Params) |
| { |
| int ret; |
| |
| ret = wmi_unified_app_type1_params_in_fw_cmd(wma->wmi_handle, |
| (struct app_type1_params *)appType1Params); |
| if (ret) { |
| WMA_LOGE("%s: Failed to set APP TYPE1 PARAMS", __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_set_app_type2_params_in_fw() - set app type2 params in fw |
| * @wma: wma handle |
| * @appType2Params: app type2 params |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_set_app_type2_params_in_fw(tp_wma_handle wma, |
| tpSirAppType2Params appType2Params) |
| { |
| struct app_type2_params params = {0}; |
| |
| if (!wma) { |
| WMA_LOGE("%s: wma handle is NULL", __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| params.vdev_id = appType2Params->vdev_id; |
| params.rc4_key_len = appType2Params->rc4_key_len; |
| qdf_mem_copy(params.rc4_key, appType2Params->rc4_key, 16); |
| params.ip_id = appType2Params->ip_id; |
| params.ip_device_ip = appType2Params->ip_device_ip; |
| params.ip_server_ip = appType2Params->ip_server_ip; |
| params.tcp_src_port = appType2Params->tcp_src_port; |
| params.tcp_dst_port = appType2Params->tcp_dst_port; |
| params.tcp_seq = appType2Params->tcp_seq; |
| params.tcp_ack_seq = appType2Params->tcp_ack_seq; |
| params.keepalive_init = appType2Params->keepalive_init; |
| params.keepalive_min = appType2Params->keepalive_min; |
| params.keepalive_max = appType2Params->keepalive_max; |
| params.keepalive_inc = appType2Params->keepalive_inc; |
| params.tcp_tx_timeout_val = appType2Params->tcp_tx_timeout_val; |
| params.tcp_rx_timeout_val = appType2Params->tcp_rx_timeout_val; |
| qdf_mem_copy(¶ms.gateway_mac, &appType2Params->gateway_mac, |
| sizeof(struct qdf_mac_addr)); |
| |
| return wmi_unified_set_app_type2_params_in_fw_cmd(wma->wmi_handle, |
| ¶ms); |
| |
| } |
| #endif /* WLAN_FEATURE_EXTWOW_SUPPORT */ |
| |
| #ifdef FEATURE_WLAN_AUTO_SHUTDOWN |
| /** |
| * wma_auto_shutdown_event_handler() - process auto shutdown timer trigger |
| * @handle: wma handle |
| * @event: event buffer |
| * @len: buffer length |
| * |
| * Return: 0 for success or error code |
| */ |
| int wma_auto_shutdown_event_handler(void *handle, uint8_t *event, |
| uint32_t len) |
| { |
| wmi_host_auto_shutdown_event_fixed_param *wmi_auto_sh_evt; |
| WMI_HOST_AUTO_SHUTDOWN_EVENTID_param_tlvs *param_buf = |
| (WMI_HOST_AUTO_SHUTDOWN_EVENTID_param_tlvs *) |
| event; |
| |
| if (!param_buf || !param_buf->fixed_param) { |
| WMA_LOGE("%s:%d: Invalid Auto shutdown timer evt", __func__, |
| __LINE__); |
| return -EINVAL; |
| } |
| |
| wmi_auto_sh_evt = param_buf->fixed_param; |
| |
| if (wmi_auto_sh_evt->shutdown_reason |
| != WMI_HOST_AUTO_SHUTDOWN_REASON_TIMER_EXPIRY) { |
| WMA_LOGE("%s:%d: Invalid Auto shutdown timer evt", __func__, |
| __LINE__); |
| return -EINVAL; |
| } |
| |
| WMA_LOGD("%s:%d: Auto Shutdown Evt: %d", __func__, __LINE__, |
| wmi_auto_sh_evt->shutdown_reason); |
| return wma_post_auto_shutdown_msg(); |
| } |
| |
| /** |
| * wma_set_auto_shutdown_timer_req() - sets auto shutdown timer in firmware |
| * @wma: wma handle |
| * @auto_sh_cmd: auto shutdown timer value |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_set_auto_shutdown_timer_req(tp_wma_handle wma_handle, |
| tSirAutoShutdownCmdParams * |
| auto_sh_cmd) |
| { |
| if (auto_sh_cmd == NULL) { |
| WMA_LOGE("%s : Invalid Autoshutdown cfg cmd", __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| return wmi_unified_set_auto_shutdown_timer_cmd(wma_handle->wmi_handle, |
| auto_sh_cmd->timer_val); |
| } |
| #endif /* FEATURE_WLAN_AUTO_SHUTDOWN */ |
| |
| #ifdef WLAN_FEATURE_NAN |
| /** |
| * wma_nan_req() - to send nan request to target |
| * @wma: wma_handle |
| * @nan_req: request data which will be non-null |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_nan_req(void *wma_ptr, tpNanRequest nan_req) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) wma_ptr; |
| struct nan_req_params *params; |
| size_t params_len; |
| QDF_STATUS status; |
| |
| if (!wma_handle) { |
| WMA_LOGE("%s: wma handle is NULL", __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| params_len = sizeof(*params) + nan_req->request_data_len; |
| params = qdf_mem_malloc(params_len); |
| |
| if (params == NULL) { |
| WMA_LOGE(FL("memory allocation failed")); |
| return QDF_STATUS_E_NOMEM; |
| } |
| |
| params->request_data_len = nan_req->request_data_len; |
| if (params->request_data_len > 0) |
| qdf_mem_copy(params->request_data, nan_req->request_data, |
| params->request_data_len); |
| |
| status = wmi_unified_nan_req_cmd(wma_handle->wmi_handle, params); |
| qdf_mem_free(params); |
| |
| return status; |
| } |
| #endif /* WLAN_FEATURE_NAN */ |
| |
| #ifdef DHCP_SERVER_OFFLOAD |
| /** |
| * wma_process_dhcpserver_offload() - enable DHCP server offload |
| * @wma_handle: wma handle |
| * @pDhcpSrvOffloadInfo: DHCP server offload info |
| * |
| * Return: 0 for success or error code |
| */ |
| QDF_STATUS wma_process_dhcpserver_offload(tp_wma_handle wma_handle, |
| tSirDhcpSrvOffloadInfo * |
| pDhcpSrvOffloadInfo) |
| { |
| struct dhcp_offload_info_params params = {0}; |
| QDF_STATUS status; |
| |
| if (!wma_handle) { |
| WMA_LOGE("%s: wma handle is NULL", __func__); |
| return -EIO; |
| } |
| |
| params.vdev_id = pDhcpSrvOffloadInfo->vdev_id; |
| params.dhcpSrvOffloadEnabled = |
| pDhcpSrvOffloadInfo->dhcpSrvOffloadEnabled; |
| params.dhcpClientNum = pDhcpSrvOffloadInfo->dhcpClientNum; |
| params.dhcpSrvIP = pDhcpSrvOffloadInfo->; |
| |
| status = wmi_unified_process_dhcpserver_offload_cmd( |
| wma_handle->wmi_handle, ¶ms); |
| if (QDF_IS_STATUS_ERROR(status)) |
| return status; |
| |
| WMA_LOGD("Set dhcp server offload to vdevId %d", |
| pDhcpSrvOffloadInfo->vdev_id); |
| return status; |
| } |
| #endif /* DHCP_SERVER_OFFLOAD */ |
| |
| #ifdef WLAN_FEATURE_GPIO_LED_FLASHING |
| /** |
| * wma_set_led_flashing() - set led flashing in fw |
| * @wma_handle: wma handle |
| * @flashing: flashing request |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_set_led_flashing(tp_wma_handle wma_handle, |
| tSirLedFlashingReq *flashing) |
| { |
| struct flashing_req_params cmd = {0}; |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE(FL("WMA is closed, can not issue cmd")); |
| return QDF_STATUS_E_INVAL; |
| } |
| if (!flashing) { |
| WMA_LOGE(FL("invalid parameter: flashing")); |
| return QDF_STATUS_E_INVAL; |
| } |
| cmd.req_id = flashing->reqId; |
| cmd.pattern_id = flashing->pattern_id; |
| cmd.led_x0 = flashing->led_x0; |
| cmd.led_x1 = flashing->led_x1; |
| status = wmi_unified_set_led_flashing_cmd(wma_handle->wmi_handle, |
| &cmd); |
| if (status != EOK) |
| return QDF_STATUS_E_FAILURE; |
| return QDF_STATUS_SUCCESS; |
| } |
| #endif /* WLAN_FEATURE_GPIO_LED_FLASHING */ |
| |
| #ifdef FEATURE_WLAN_CH_AVOID |
| /** |
| * wma_channel_avoid_evt_handler() - process channel to avoid event from FW. |
| * @handle: wma handle |
| * @event: event buffer |
| * @len: buffer length |
| * |
| * Return: 0 for success or error code |
| */ |
| int wma_channel_avoid_evt_handler(void *handle, uint8_t *event, |
| uint32_t len) |
| { |
| wmi_avoid_freq_ranges_event_fixed_param *afr_fixed_param; |
| wmi_avoid_freq_range_desc *afr_desc; |
| uint32_t num_freq_ranges, freq_range_idx; |
| tSirChAvoidIndType *sca_indication; |
| QDF_STATUS qdf_status; |
| struct scheduler_msg sme_msg = { 0 }; |
| WMI_WLAN_FREQ_AVOID_EVENTID_param_tlvs *param_buf = |
| (WMI_WLAN_FREQ_AVOID_EVENTID_param_tlvs *) event; |
| |
| if (!param_buf) { |
| WMA_LOGE("Invalid channel avoid event buffer"); |
| return -EINVAL; |
| } |
| |
| afr_fixed_param = param_buf->fixed_param; |
| if (!afr_fixed_param) { |
| WMA_LOGE("Invalid channel avoid event fixed param buffer"); |
| return -EINVAL; |
| } |
| |
| num_freq_ranges = |
| (afr_fixed_param->num_freq_ranges > |
| SIR_CH_AVOID_MAX_RANGE) ? SIR_CH_AVOID_MAX_RANGE : |
| afr_fixed_param->num_freq_ranges; |
| |
| WMA_LOGD("Channel avoid event received with %d ranges", |
| num_freq_ranges); |
| for (freq_range_idx = 0; freq_range_idx < num_freq_ranges; |
| freq_range_idx++) { |
| afr_desc = (wmi_avoid_freq_range_desc *) |
| ((void *)param_buf->avd_freq_range + |
| freq_range_idx * |
| sizeof(wmi_avoid_freq_range_desc)); |
| |
| WMA_LOGD("range %d tlv id = %u, start freq = %u, end freq = %u", |
| freq_range_idx, afr_desc->tlv_header, |
| afr_desc->start_freq, afr_desc->end_freq); |
| } |
| |
| sca_indication = (tSirChAvoidIndType *) |
| qdf_mem_malloc(sizeof(tSirChAvoidIndType)); |
| if (!sca_indication) { |
| WMA_LOGE("Invalid channel avoid indication buffer"); |
| return -EINVAL; |
| } |
| |
| sca_indication->avoid_range_count = num_freq_ranges; |
| for (freq_range_idx = 0; freq_range_idx < num_freq_ranges; |
| freq_range_idx++) { |
| afr_desc = (wmi_avoid_freq_range_desc *) |
| ((void *)param_buf->avd_freq_range + |
| freq_range_idx * |
| sizeof(wmi_avoid_freq_range_desc)); |
| sca_indication->avoid_freq_range[freq_range_idx].start_freq = |
| afr_desc->start_freq; |
| sca_indication->avoid_freq_range[freq_range_idx].end_freq = |
| afr_desc->end_freq; |
| } |
| |
| sme_msg.type = eWNI_SME_CH_AVOID_IND; |
| sme_msg.bodyptr = sca_indication; |
| sme_msg.bodyval = 0; |
| |
| qdf_status = scheduler_post_msg(QDF_MODULE_ID_SME, &sme_msg); |
| if (!QDF_IS_STATUS_SUCCESS(qdf_status)) { |
| WMA_LOGE("Fail to post eWNI_SME_CH_AVOID_IND msg to SME"); |
| qdf_mem_free(sca_indication); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * wma_process_ch_avoid_update_req() - handles channel avoid update request |
| * @wma_handle: wma handle |
| * @ch_avoid_update_req: channel avoid update params |
| * |
| * Return: QDF status |
| */ |
| QDF_STATUS wma_process_ch_avoid_update_req(tp_wma_handle wma_handle, |
| tSirChAvoidUpdateReq * |
| ch_avoid_update_req) |
| { |
| QDF_STATUS status; |
| |
| if (!wma_handle) { |
| WMA_LOGE("%s: wma handle is NULL", __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| if (ch_avoid_update_req == NULL) { |
| WMA_LOGE("%s : ch_avoid_update_req is NULL", __func__); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGD("%s: WMA --> WMI_CHAN_AVOID_UPDATE", __func__); |
| |
| status = wmi_unified_process_ch_avoid_update_cmd( |
| wma_handle->wmi_handle); |
| if (QDF_IS_STATUS_ERROR(status)) |
| return status; |
| |
| WMA_LOGD("%s: WMA --> WMI_CHAN_AVOID_UPDATE sent through WMI", |
| __func__); |
| return status; |
| } |
| #endif /* FEATURE_WLAN_CH_AVOID */ |
| /** |
| * wma_send_regdomain_info_to_fw() - send regdomain info to fw |
| * @reg_dmn: reg domain |
| * @regdmn2G: 2G reg domain |
| * @regdmn5G: 5G reg domain |
| * @ctl2G: 2G test limit |
| * @ctl5G: 5G test limit |
| * |
| * Return: none |
| */ |
| void wma_send_regdomain_info_to_fw(uint32_t reg_dmn, uint16_t regdmn2G, |
| uint16_t regdmn5G, int8_t ctl2G, |
| int8_t ctl5G) |
| { |
| tp_wma_handle wma = cds_get_context(QDF_MODULE_ID_WMA); |
| int32_t cck_mask_val = 0; |
| struct pdev_params pdev_param = {0}; |
| QDF_STATUS ret = QDF_STATUS_SUCCESS; |
| QDF_STATUS status = QDF_STATUS_SUCCESS; |
| |
| if (NULL == wma) { |
| WMA_LOGE("%s: wma context is NULL", __func__); |
| return; |
| } |
| |
| status = wmi_unified_send_regdomain_info_to_fw_cmd(wma->wmi_handle, |
| reg_dmn, regdmn2G, regdmn5G, ctl2G, ctl5G); |
| if (status == QDF_STATUS_E_NOMEM) |
| return; |
| |
| if ((((reg_dmn & ~CTRY_FLAG) == CTRY_JAPAN14) || |
| ((reg_dmn & ~CTRY_FLAG) == CTRY_KOREA_ROC)) && |
| (true == wma->tx_chain_mask_cck)) |
| cck_mask_val = 1; |
| |
| cck_mask_val |= (wma->self_gen_frm_pwr << 16); |
| pdev_param.param_id = WMI_PDEV_PARAM_TX_CHAIN_MASK_CCK; |
| pdev_param.param_value = cck_mask_val; |
| ret = wmi_unified_pdev_param_send(wma->wmi_handle, |
| &pdev_param, |
| WMA_WILDCARD_PDEV_ID); |
| |
| if (QDF_IS_STATUS_ERROR(ret)) |
| WMA_LOGE("failed to set PDEV tx_chain_mask_cck %d", |
| ret); |
| } |
| |
| /** |
| * wma_suspend_target_timeout() - Handles the target suspend timeout |
| * @is_self_recovery_enabled: Is self recovery enabled or not |
| * |
| * Return: NONE |
| */ |
| static inline void wma_suspend_target_timeout(bool is_self_recovery_enabled) |
| { |
| if (cds_is_load_or_unload_in_progress()) |
| WMA_LOGE("%s: Module (un)loading; Ignoring suspend timeout", |
| __func__); |
| else if (cds_is_driver_recovering()) |
| WMA_LOGE("%s: Module recovering; Ignoring suspend timeout", |
| __func__); |
| else if (is_self_recovery_enabled) |
| cds_trigger_recovery(false); |
| else |
| QDF_BUG(0); |
| } |
| |
| #ifdef FEATURE_WLAN_TDLS |
| /** |
| * wma_tdls_event_handler() - handle TDLS event |
| * @handle: wma handle |
| * @event: event buffer |
| * @len: buffer length |
| * |
| * Return: 0 for success or error code |
| */ |
| int wma_tdls_event_handler(void *handle, uint8_t *event, uint32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_TDLS_PEER_EVENTID_param_tlvs *param_buf = NULL; |
| wmi_tdls_peer_event_fixed_param *peer_event = NULL; |
| tSirTdlsEventnotify *tdls_event; |
| |
| if (!event) { |
| WMA_LOGE("%s: event param null", __func__); |
| return -EINVAL; |
| } |
| |
| param_buf = (WMI_TDLS_PEER_EVENTID_param_tlvs *) event; |
| if (!param_buf) { |
| WMA_LOGE("%s: received null buf from target", __func__); |
| return -EINVAL; |
| } |
| |
| peer_event = param_buf->fixed_param; |
| if (!peer_event) { |
| WMA_LOGE("%s: received null event data from target", __func__); |
| return -EINVAL; |
| } |
| |
| tdls_event = (tSirTdlsEventnotify *) |
| qdf_mem_malloc(sizeof(*tdls_event)); |
| if (!tdls_event) { |
| WMA_LOGE("%s: failed to allocate memory for tdls_event", |
| __func__); |
| return -ENOMEM; |
| } |
| |
| tdls_event->sessionId = peer_event->vdev_id; |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&peer_event->peer_macaddr, |
| tdls_event->peermac.bytes); |
| |
| switch (peer_event->peer_status) { |
| case WMI_TDLS_SHOULD_DISCOVER: |
| tdls_event->messageType = WMA_TDLS_SHOULD_DISCOVER_CMD; |
| break; |
| case WMI_TDLS_SHOULD_TEARDOWN: |
| tdls_event->messageType = WMA_TDLS_SHOULD_TEARDOWN_CMD; |
| break; |
| case WMI_TDLS_PEER_DISCONNECTED: |
| tdls_event->messageType = WMA_TDLS_PEER_DISCONNECTED_CMD; |
| break; |
| case WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION: |
| tdls_event->messageType = |
| WMA_TDLS_CONNECTION_TRACKER_NOTIFICATION_CMD; |
| break; |
| default: |
| qdf_mem_free(tdls_event); |
| WMA_LOGE("%s: Discarding unknown tdls event(%d) from target", |
| __func__, peer_event->peer_status); |
| return -EINVAL; |
| } |
| |
| switch (peer_event->peer_reason) { |
| case WMI_TDLS_TEARDOWN_REASON_TX: |
| tdls_event->peer_reason = eWNI_TDLS_TEARDOWN_REASON_TX; |
| break; |
| case WMI_TDLS_TEARDOWN_REASON_RSSI: |
| tdls_event->peer_reason = eWNI_TDLS_TEARDOWN_REASON_RSSI; |
| break; |
| case WMI_TDLS_TEARDOWN_REASON_SCAN: |
| tdls_event->peer_reason = eWNI_TDLS_TEARDOWN_REASON_SCAN; |
| break; |
| case WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE: |
| tdls_event->peer_reason = |
| eWNI_TDLS_DISCONNECTED_REASON_PEER_DELETE; |
| break; |
| case WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT: |
| tdls_event->peer_reason = eWNI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT; |
| break; |
| case WMI_TDLS_TEARDOWN_REASON_BAD_PTR: |
| tdls_event->peer_reason = eWNI_TDLS_TEARDOWN_REASON_BAD_PTR; |
| break; |
| case WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE: |
| tdls_event->peer_reason = eWNI_TDLS_TEARDOWN_REASON_NO_RESPONSE; |
| break; |
| case WMI_TDLS_ENTER_BUF_STA: |
| tdls_event->peer_reason = eWNI_TDLS_PEER_ENTER_BUF_STA; |
| break; |
| case WMI_TDLS_EXIT_BUF_STA: |
| tdls_event->peer_reason = eWNI_TDLS_PEER_EXIT_BUF_STA; |
| break; |
| case WMI_TDLS_ENTER_BT_BUSY_MODE: |
| tdls_event->peer_reason = eWNI_TDLS_ENTER_BT_BUSY_MODE; |
| break; |
| case WMI_TDLS_EXIT_BT_BUSY_MODE: |
| tdls_event->peer_reason = eWNI_TDLS_EXIT_BT_BUSY_MODE; |
| break; |
| case WMI_TDLS_SCAN_STARTED_EVENT: |
| tdls_event->peer_reason = eWMI_TDLS_SCAN_STARTED_EVENT; |
| break; |
| case WMI_TDLS_SCAN_COMPLETED_EVENT: |
| tdls_event->peer_reason = eWMI_TDLS_SCAN_COMPLETED_EVENT; |
| break; |
| |
| default: |
| qdf_mem_free(tdls_event); |
| WMA_LOGE("%s: unknown reason(%d) in tdls event(%d) from target", |
| __func__, peer_event->peer_reason, |
| peer_event->peer_status); |
| return -EINVAL; |
| } |
| |
| WMA_LOGD("%s: sending msg to umac, messageType: 0x%x, for peer: %pM, reason: %d, smesessionId: %d", |
| __func__, tdls_event->messageType, tdls_event->peermac.bytes, |
| tdls_event->peer_reason, tdls_event->sessionId); |
| |
| wma_send_msg(wma, tdls_event->messageType, (void *)tdls_event, 0); |
| return 0; |
| } |
| |
| /** |
| * wma_set_tdls_offchan_mode() - set tdls off channel mode |
| * @handle: wma handle |
| * @chan_switch_params: Pointer to tdls channel switch parameter structure |
| * |
| * This function sets tdls off channel mode |
| * |
| * Return: 0 on success; Negative errno otherwise |
| */ |
| QDF_STATUS wma_set_tdls_offchan_mode(WMA_HANDLE handle, |
| tdls_chan_switch_params *chan_switch_params) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| struct tdls_channel_switch_params params = {0}; |
| QDF_STATUS ret = QDF_STATUS_SUCCESS; |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE(FL( |
| "WMA is closed, can not issue tdls off channel cmd" |
| )); |
| ret = -EINVAL; |
| goto end; |
| } |
| |
| if (wma_is_roam_synch_in_progress(wma_handle, |
| chan_switch_params->vdev_id)) { |
| WMA_LOGE("%s: roaming in progress, reject offchan mode cmd!", |
| __func__); |
| ret = -EPERM; |
| goto end; |
| } |
| |
| params.vdev_id = chan_switch_params->vdev_id; |
| params.tdls_off_ch_bw_offset = |
| chan_switch_params->tdls_off_ch_bw_offset; |
| params.tdls_off_ch = chan_switch_params->tdls_off_ch; |
| params.tdls_sw_mode = chan_switch_params->tdls_sw_mode; |
| params.oper_class = chan_switch_params->oper_class; |
| params.is_responder = chan_switch_params->is_responder; |
| qdf_mem_copy(params.peer_mac_addr, chan_switch_params->peer_mac_addr, |
| IEEE80211_ADDR_LEN); |
| |
| ret = wmi_unified_set_tdls_offchan_mode_cmd(wma_handle->wmi_handle, |
| ¶ms); |
| |
| end: |
| if (chan_switch_params) |
| qdf_mem_free(chan_switch_params); |
| return ret; |
| } |
| |
| /** |
| * wma_update_fw_tdls_state() - send enable/disable tdls for a vdev |
| * @wma: wma handle |
| * @pwmaTdlsparams: TDLS params |
| * |
| * Return: 0 for sucess or error code |
| */ |
| QDF_STATUS wma_update_fw_tdls_state(WMA_HANDLE handle, void *pwmaTdlsparams) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| t_wma_tdls_mode tdls_mode; |
| t_wma_tdls_params *wma_tdls = (t_wma_tdls_params *) pwmaTdlsparams; |
| struct wmi_tdls_params params = {0}; |
| QDF_STATUS ret = QDF_STATUS_SUCCESS; |
| uint8_t tdls_state; |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue fw tdls state cmd", |
| __func__); |
| ret = -EINVAL; |
| goto end_fw_tdls_state; |
| } |
| |
| if (wma_is_roam_synch_in_progress(wma_handle, wma_tdls->vdev_id)) { |
| WMA_LOGE("%s: roaming in progress, reject fw tdls state cmd!", |
| __func__); |
| ret = -EPERM; |
| goto end_fw_tdls_state; |
| } |
| |
| params.tdls_state = wma_tdls->tdls_state; |
| tdls_mode = wma_tdls->tdls_state; |
| |
| if (tdls_mode == WMA_TDLS_SUPPORT_EXPLICIT_TRIGGER_ONLY) |
| tdls_state = WMI_TDLS_ENABLE_PASSIVE; |
| else if (tdls_mode == WMA_TDLS_SUPPORT_ENABLED) |
| tdls_state = WMI_TDLS_ENABLE_CONNECTION_TRACKER_IN_HOST; |
| else if (tdls_mode == WMA_TDLS_SUPPORT_ACTIVE_EXTERNAL_CONTROL) |
| tdls_state = WMI_TDLS_ENABLE_CONNECTION_TRACKER_IN_HOST; |
| else |
| tdls_state = WMI_TDLS_DISABLE; |
| |
| params.vdev_id = wma_tdls->vdev_id; |
| params.notification_interval_ms = wma_tdls->notification_interval_ms; |
| params.tx_discovery_threshold = wma_tdls->tx_discovery_threshold; |
| params.tx_teardown_threshold = wma_tdls->tx_teardown_threshold; |
| params.rssi_teardown_threshold = wma_tdls->rssi_teardown_threshold; |
| params.rssi_delta = wma_tdls->rssi_delta; |
| params.tdls_options = wma_tdls->tdls_options; |
| params.peer_traffic_ind_window = wma_tdls->peer_traffic_ind_window; |
| params.peer_traffic_response_timeout = |
| wma_tdls->peer_traffic_response_timeout; |
| params.puapsd_mask = wma_tdls->puapsd_mask; |
| params.puapsd_inactivity_time = wma_tdls->puapsd_inactivity_time; |
| params.puapsd_rx_frame_threshold = |
| wma_tdls->puapsd_rx_frame_threshold; |
| params.teardown_notification_ms = |
| wma_tdls->teardown_notification_ms; |
| params.tdls_peer_kickout_threshold = |
| wma_tdls->tdls_peer_kickout_threshold; |
| |
| ret = wmi_unified_update_fw_tdls_state_cmd(wma_handle->wmi_handle, |
| ¶ms, tdls_state); |
| if (QDF_IS_STATUS_ERROR(ret)) |
| goto end_fw_tdls_state; |
| |
| WMA_LOGD("%s: vdev_id %d", __func__, wma_tdls->vdev_id); |
| |
| end_fw_tdls_state: |
| if (pwmaTdlsparams) |
| qdf_mem_free(pwmaTdlsparams); |
| return ret; |
| } |
| |
| /** |
| * wma_update_tdls_peer_state() - update TDLS peer state |
| * @handle: wma handle |
| * @peerStateParams: TDLS peer state params |
| * |
| * Return: 0 for success or error code |
| */ |
| int wma_update_tdls_peer_state(WMA_HANDLE handle, |
| tTdlsPeerStateParams *peerStateParams) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| uint32_t i; |
| struct cdp_pdev *pdev; |
| uint8_t peer_id; |
| void *peer; |
| void *soc = cds_get_context(QDF_MODULE_ID_SOC); |
| uint8_t *peer_mac_addr; |
| int ret = 0; |
| uint32_t *ch_mhz = NULL; |
| bool restore_last_peer = false; |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue cmd", __func__); |
| ret = -EINVAL; |
| goto end_tdls_peer_state; |
| } |
| |
| if (!soc) { |
| WMA_LOGE("%s: SOC context is NULL", __func__); |
| ret = -EINVAL; |
| goto end_tdls_peer_state; |
| } |
| |
| if (wma_is_roam_synch_in_progress(wma_handle, |
| peerStateParams->vdevId)) { |
| WMA_LOGE("%s: roaming in progress, reject peer update cmd!", |
| __func__); |
| ret = -EPERM; |
| goto end_tdls_peer_state; |
| } |
| |
| /* peer capability info is valid only when peer state is connected */ |
| if (WMA_TDLS_PEER_STATE_CONNECTED != peerStateParams->peerState) { |
| qdf_mem_zero(&peerStateParams->peerCap, |
| sizeof(tTdlsPeerCapParams)); |
| } |
| |
| if (peerStateParams->peerCap.peerChanLen) { |
| ch_mhz = qdf_mem_malloc(sizeof(uint32_t) * |
| peerStateParams->peerCap.peerChanLen); |
| if (ch_mhz == NULL) { |
| WMA_LOGE("%s: memory allocation failed", __func__); |
| ret = -ENOMEM; |
| goto end_tdls_peer_state; |
| } |
| } |
| |
| for (i = 0; i < peerStateParams->peerCap.peerChanLen; ++i) { |
| ch_mhz[i] = |
| cds_chan_to_freq(peerStateParams->peerCap.peerChan[i]. |
| chanId); |
| } |
| |
| if (wmi_unified_update_tdls_peer_state_cmd(wma_handle->wmi_handle, |
| (struct tdls_peer_state_params *)peerStateParams, |
| ch_mhz)) { |
| WMA_LOGE("%s: failed to send tdls peer update state command", |
| __func__); |
| ret = -EIO; |
| goto end_tdls_peer_state; |
| } |
| |
| /* in case of teardown, remove peer from fw */ |
| if (WMA_TDLS_PEER_STATE_TEARDOWN == peerStateParams->peerState) { |
| pdev = cds_get_context(QDF_MODULE_ID_TXRX); |
| if (!pdev) { |
| WMA_LOGE("%s: Failed to find pdev", __func__); |
| ret = -EIO; |
| goto end_tdls_peer_state; |
| } |
| |
| peer = cdp_peer_find_by_addr(soc, |
| pdev, |
| peerStateParams->peerMacAddr, |
| &peer_id); |
| if (!peer) { |
| WMA_LOGE("%s: Failed to get peer handle using peer mac %pM", |
| __func__, peerStateParams->peerMacAddr); |
| ret = -EIO; |
| goto end_tdls_peer_state; |
| } |
| peer_mac_addr = cdp_peer_get_peer_mac_addr(soc, peer); |
| if (peer_mac_addr == NULL) { |
| WMA_LOGE("peer_mac_addr is NULL"); |
| ret = -EIO; |
| goto end_tdls_peer_state; |
| } |
| |
| restore_last_peer = cdp_peer_is_vdev_restore_last_peer( |
| soc, peer); |
| |
| WMA_LOGD("%s: calling wma_remove_peer for peer " MAC_ADDRESS_STR |
| " vdevId: %d", __func__, |
| MAC_ADDR_ARRAY(peer_mac_addr), |
| peerStateParams->vdevId); |
| wma_remove_peer(wma_handle, peer_mac_addr, |
| peerStateParams->vdevId, peer, false); |
| cdp_peer_update_last_real_peer(soc, |
| pdev, peer, &peer_id, |
| restore_last_peer); |
| } |
| |
| end_tdls_peer_state: |
| if (ch_mhz) |
| qdf_mem_free(ch_mhz); |
| if (peerStateParams) |
| qdf_mem_free(peerStateParams); |
| return ret; |
| } |
| #endif /* FEATURE_WLAN_TDLS */ |
| |
| #ifdef WLAN_FEATURE_MEMDUMP |
| /* |
| * wma_process_fw_mem_dump_req() - Function to request fw memory dump from |
| * firmware |
| * @wma: Pointer to WMA handle |
| * @mem_dump_req: Pointer for mem_dump_req |
| * |
| * This function sends memory dump request to firmware |
| * |
| * Return: QDF_STATUS_SUCCESS for success otherwise failure |
| * |
| */ |
| QDF_STATUS wma_process_fw_mem_dump_req(tp_wma_handle wma, |
| struct fw_dump_req *mem_dump_req) |
| { |
| int ret; |
| |
| if (!mem_dump_req || !wma) { |
| WMA_LOGE(FL("input pointer is NULL")); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| ret = wmi_unified_process_fw_mem_dump_cmd(wma->wmi_handle, |
| (struct fw_dump_req_param *) mem_dump_req); |
| if (ret) |
| return QDF_STATUS_E_FAILURE; |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_fw_mem_dump_rsp() - send fw mem dump response to SME |
| * |
| * @req_id - request id. |
| * @status - copy status from the firmware. |
| * |
| * This function is called by the memory dump response handler to |
| * indicate SME that firmware dump copy is complete |
| * |
| * Return: QDF_STATUS |
| */ |
| static QDF_STATUS wma_fw_mem_dump_rsp(uint32_t req_id, uint32_t status) |
| { |
| struct fw_dump_rsp *dump_rsp; |
| struct scheduler_msg sme_msg = {0}; |
| QDF_STATUS qdf_status = QDF_STATUS_SUCCESS; |
| |
| dump_rsp = qdf_mem_malloc(sizeof(*dump_rsp)); |
| |
| if (!dump_rsp) { |
| WMA_LOGE(FL("Memory allocation failed.")); |
| qdf_status = QDF_STATUS_E_NOMEM; |
| return qdf_status; |
| } |
| |
| WMA_LOGI(FL("FW memory dump copy complete status: %d for request: %d"), |
| status, req_id); |
| |
| dump_rsp->request_id = req_id; |
| dump_rsp->dump_complete = status; |
| |
| sme_msg.type = eWNI_SME_FW_DUMP_IND; |
| sme_msg.bodyptr = dump_rsp; |
| sme_msg.bodyval = 0; |
| |
| qdf_status = scheduler_post_msg(QDF_MODULE_ID_SME, &sme_msg); |
| if (!QDF_IS_STATUS_SUCCESS(qdf_status)) { |
| WMA_LOGE(FL("Fail to post fw mem dump ind msg")); |
| qdf_mem_free(dump_rsp); |
| } |
| |
| return qdf_status; |
| } |
| |
| /** |
| * wma_fw_mem_dump_event_handler() - handles fw memory dump event |
| * |
| * @handle: pointer to wma handle. |
| * @cmd_param_info: pointer to TLV info received in the event. |
| * @len: length of data in @cmd_param_info |
| * |
| * This function is a handler for firmware memory dump event. |
| * |
| * Return: integer (0 for success and error code otherwise) |
| */ |
| int wma_fw_mem_dump_event_handler(void *handle, u_int8_t *cmd_param_info, |
| u_int32_t len) |
| { |
| WMI_UPDATE_FW_MEM_DUMP_EVENTID_param_tlvs *param_buf; |
| wmi_update_fw_mem_dump_fixed_param *event; |
| QDF_STATUS status; |
| |
| param_buf = |
| (WMI_UPDATE_FW_MEM_DUMP_EVENTID_param_tlvs *) cmd_param_info; |
| if (!param_buf) { |
| WMA_LOGA("%s: Invalid stats event", __func__); |
| return -EINVAL; |
| } |
| |
| event = param_buf->fixed_param; |
| |
| status = wma_fw_mem_dump_rsp(event->request_id, |
| event->fw_mem_dump_complete); |
| if (QDF_STATUS_SUCCESS != status) { |
| WMA_LOGE("Error posting FW MEM DUMP RSP."); |
| return -EINVAL; |
| } |
| |
| WMA_LOGI("FW MEM DUMP RSP posted successfully"); |
| return 0; |
| } |
| #endif /* WLAN_FEATURE_MEMDUMP */ |
| |
| /* |
| * wma_process_set_ie_info() - Function to send IE info to firmware |
| * @wma: Pointer to WMA handle |
| * @ie_data: Pointer for ie data |
| * |
| * This function sends IE information to firmware |
| * |
| * Return: QDF_STATUS_SUCCESS for success otherwise failure |
| * |
| */ |
| QDF_STATUS wma_process_set_ie_info(tp_wma_handle wma, |
| struct vdev_ie_info *ie_info) |
| { |
| struct wma_txrx_node *interface; |
| struct vdev_ie_info_param cmd = {0}; |
| int ret; |
| |
| if (!ie_info || !wma) { |
| WMA_LOGE(FL("input pointer is NULL")); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /* Validate the input */ |
| if (ie_info->length <= 0) { |
| WMA_LOGE(FL("Invalid IE length")); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| if (ie_info->vdev_id >= wma->max_bssid) { |
| WMA_LOGE(FL("Invalid vdev_id: %d"), ie_info->vdev_id); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| interface = &wma->interfaces[ie_info->vdev_id]; |
| if (!interface->is_vdev_valid) { |
| WMA_LOGE(FL("vdev_id: %d is not active"), ie_info->vdev_id); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| cmd.vdev_id = ie_info->vdev_id; |
| cmd.ie_id = ie_info->ie_id; |
| cmd.length = ie_info->length; |
| cmd.band = ie_info->band; |
| cmd.data = ie_info->data; |
| cmd.ie_source = WMA_SET_VDEV_IE_SOURCE_HOST; |
| |
| WMA_LOGD(FL("vdev id: %d, ie_id: %d, band: %d, len: %d"), |
| ie_info->vdev_id, ie_info->ie_id, ie_info->band, |
| ie_info->length); |
| |
| QDF_TRACE_HEX_DUMP(QDF_MODULE_ID_WMA, QDF_TRACE_LEVEL_DEBUG, |
| ie_info->data, ie_info->length); |
| |
| ret = wmi_unified_process_set_ie_info_cmd(wma->wmi_handle, |
| &cmd); |
| return ret; |
| } |
| |
| /** |
| * wma_get_bpf_caps_event_handler() - Event handler for get bpf capability |
| * @handle: WMA global handle |
| * @cmd_param_info: command event data |
| * @len: Length of @cmd_param_info |
| * |
| * Return: 0 on Success or Errno on failure |
| */ |
| int wma_get_bpf_caps_event_handler(void *handle, |
| u_int8_t *cmd_param_info, |
| u_int32_t len) |
| { |
| WMI_BPF_CAPABILIY_INFO_EVENTID_param_tlvs *param_buf; |
| wmi_bpf_capability_info_evt_fixed_param *event; |
| struct sir_bpf_get_offload *bpf_get_offload; |
| tpAniSirGlobal pmac = (tpAniSirGlobal)cds_get_context( |
| QDF_MODULE_ID_PE); |
| |
| if (!pmac) { |
| WMA_LOGE("%s: Invalid pmac", __func__); |
| return -EINVAL; |
| } |
| if (!pmac->sme.bpf_get_offload_cb) { |
| WMA_LOGE("%s: Callback not registered", __func__); |
| return -EINVAL; |
| } |
| |
| param_buf = (WMI_BPF_CAPABILIY_INFO_EVENTID_param_tlvs *)cmd_param_info; |
| event = param_buf->fixed_param; |
| bpf_get_offload = qdf_mem_malloc(sizeof(*bpf_get_offload)); |
| |
| if (!bpf_get_offload) { |
| WMA_LOGP("%s: Memory allocation failed.", __func__); |
| return -ENOMEM; |
| } |
| |
| bpf_get_offload->bpf_version = event->bpf_version; |
| bpf_get_offload->max_bpf_filters = event->max_bpf_filters; |
| bpf_get_offload->max_bytes_for_bpf_inst = |
| event->max_bytes_for_bpf_inst; |
| WMA_LOGD("%s: BPF capabilities version: %d max bpf filter size: %d", |
| __func__, bpf_get_offload->bpf_version, |
| bpf_get_offload->max_bytes_for_bpf_inst); |
| |
| WMA_LOGD("%s: sending bpf capabilities event to hdd", __func__); |
| pmac->sme.bpf_get_offload_cb(pmac->sme.bpf_get_offload_context, |
| bpf_get_offload); |
| qdf_mem_free(bpf_get_offload); |
| return 0; |
| } |
| |
| /** |
| * wma_get_bpf_capabilities - Send get bpf capability to firmware |
| * @wma_handle: wma handle |
| * |
| * Return: QDF_STATUS enumeration. |
| */ |
| QDF_STATUS wma_get_bpf_capabilities(tp_wma_handle wma) |
| { |
| QDF_STATUS status = QDF_STATUS_SUCCESS; |
| wmi_bpf_get_capability_cmd_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| uint32_t len; |
| u_int8_t *buf_ptr; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE(FL("WMA is closed, can not issue get BPF capab")); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| if (!WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_BPF_OFFLOAD)) { |
| WMA_LOGE(FL("BPF cababilities feature bit not enabled")); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| len = sizeof(*cmd); |
| wmi_buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return QDF_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(wmi_buf); |
| cmd = (wmi_bpf_get_capability_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_bpf_get_capability_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_bpf_get_capability_cmd_fixed_param)); |
| |
| if (wmi_unified_cmd_send(wma->wmi_handle, wmi_buf, len, |
| WMI_BPF_GET_CAPABILITY_CMDID)) { |
| WMA_LOGE(FL("Failed to send BPF capability command")); |
| wmi_buf_free(wmi_buf); |
| return QDF_STATUS_E_FAILURE; |
| } |
| return status; |
| } |
| |
| /** |
| * wma_set_bpf_instructions - Set bpf instructions to firmware |
| * @wma: wma handle |
| * @bpf_set_offload: Bpf offload information to set to firmware |
| * |
| * Return: QDF_STATUS enumeration |
| */ |
| QDF_STATUS wma_set_bpf_instructions(tp_wma_handle wma, |
| struct sir_bpf_set_offload *bpf_set_offload) |
| { |
| wmi_bpf_set_vdev_instructions_cmd_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| uint32_t len = 0, len_aligned = 0; |
| u_int8_t *buf_ptr; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue set BPF capability", |
| __func__); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| if (!WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_BPF_OFFLOAD)) { |
| WMA_LOGE(FL("BPF offload feature Disabled")); |
| return QDF_STATUS_E_NOSUPPORT; |
| } |
| |
| if (bpf_set_offload->total_length) { |
| len_aligned = roundup(bpf_set_offload->current_length, |
| sizeof(A_UINT32)); |
| len = len_aligned + WMI_TLV_HDR_SIZE; |
| } |
| |
| len += sizeof(*cmd); |
| wmi_buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return QDF_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(wmi_buf); |
| cmd = (wmi_bpf_set_vdev_instructions_cmd_fixed_param *) buf_ptr; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_bpf_set_vdev_instructions_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_bpf_set_vdev_instructions_cmd_fixed_param)); |
| cmd->vdev_id = bpf_set_offload->session_id; |
| cmd->filter_id = bpf_set_offload->filter_id; |
| cmd->total_length = bpf_set_offload->total_length; |
| cmd->current_offset = bpf_set_offload->current_offset; |
| cmd->current_length = bpf_set_offload->current_length; |
| |
| if (bpf_set_offload->total_length) { |
| buf_ptr += |
| sizeof(wmi_bpf_set_vdev_instructions_cmd_fixed_param); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, len_aligned); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| qdf_mem_copy(buf_ptr, bpf_set_offload->program, |
| bpf_set_offload->current_length); |
| } |
| |
| if (wmi_unified_cmd_send(wma->wmi_handle, wmi_buf, len, |
| WMI_BPF_SET_VDEV_INSTRUCTIONS_CMDID)) { |
| WMA_LOGE(FL("Failed to send config bpf instructions command")); |
| wmi_buf_free(wmi_buf); |
| return QDF_STATUS_E_FAILURE; |
| } |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_set_tx_rx_aggregation_size() - sets tx rx aggregation sizes |
| * @tx_rx_aggregation_size: aggregation size parameters |
| * |
| * This function sets tx rx aggregation sizes |
| * |
| * Return: VOS_STATUS_SUCCESS on success, error number otherwise |
| */ |
| QDF_STATUS wma_set_tx_rx_aggregation_size( |
| struct sir_set_tx_rx_aggregation_size *tx_rx_aggregation_size) |
| { |
| tp_wma_handle wma_handle; |
| wmi_vdev_set_custom_aggr_size_cmd_fixed_param *cmd; |
| int32_t len; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| int ret; |
| |
| wma_handle = cds_get_context(QDF_MODULE_ID_WMA); |
| |
| if (!tx_rx_aggregation_size) { |
| WMA_LOGE("%s: invalid pointer", __func__); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| if (!wma_handle) { |
| WMA_LOGE("%s: WMA context is invald!", __func__); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| len = sizeof(*cmd); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return QDF_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_vdev_set_custom_aggr_size_cmd_fixed_param *) buf_ptr; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_set_custom_aggr_size_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vdev_set_custom_aggr_size_cmd_fixed_param)); |
| |
| cmd->vdev_id = tx_rx_aggregation_size->vdev_id; |
| cmd->tx_aggr_size = tx_rx_aggregation_size->tx_aggregation_size; |
| cmd->rx_aggr_size = tx_rx_aggregation_size->rx_aggregation_size; |
| |
| WMA_LOGD("tx aggr: %d rx aggr: %d vdev: %d", |
| cmd->tx_aggr_size, cmd->rx_aggr_size, cmd->vdev_id); |
| |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_VDEV_SET_CUSTOM_AGGR_SIZE_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to send aggregation size command", |
| __func__); |
| wmi_buf_free(buf); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_p2p_lo_start() - P2P listen offload start |
| * @params: p2p listen offload parameters |
| * |
| * This function sends WMI command to start P2P listen offload. |
| * |
| * Return: QDF_STATUS enumeration |
| */ |
| QDF_STATUS wma_p2p_lo_start(struct sir_p2p_lo_start *params) |
| { |
| wmi_buf_t buf; |
| wmi_p2p_lo_start_cmd_fixed_param *cmd; |
| int32_t len = sizeof(*cmd); |
| tp_wma_handle wma = cds_get_context(QDF_MODULE_ID_WMA); |
| uint8_t *buf_ptr; |
| int ret; |
| int device_types_len_aligned, probe_resp_len_aligned; |
| |
| if (NULL == wma) { |
| WMA_LOGE("%s: wma context is NULL", __func__); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| device_types_len_aligned = qdf_roundup(params->dev_types_len, |
| sizeof(A_UINT32)); |
| probe_resp_len_aligned = qdf_roundup(params->probe_resp_len, |
| sizeof(A_UINT32)); |
| |
| len += 2 * WMI_TLV_HDR_SIZE + device_types_len_aligned + |
| probe_resp_len_aligned; |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: failed to allocate memory for p2p lo start", |
| __func__); |
| return QDF_STATUS_E_NOMEM; |
| } |
| |
| cmd = (wmi_p2p_lo_start_cmd_fixed_param *)wmi_buf_data(buf); |
| buf_ptr = (uint8_t *) wmi_buf_data(buf); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_p2p_lo_start_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_p2p_lo_start_cmd_fixed_param)); |
| |
| cmd->vdev_id = params->vdev_id; |
| cmd->ctl_flags = params->ctl_flags; |
| cmd->channel = params->freq; |
| cmd->period = params->period; |
| cmd->interval = params->interval; |
| cmd->count = params->count; |
| cmd->device_types_len = params->dev_types_len; |
| cmd->prob_resp_len = params->probe_resp_len; |
| |
| buf_ptr += sizeof(wmi_p2p_lo_start_cmd_fixed_param); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, |
| device_types_len_aligned); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| qdf_mem_copy(buf_ptr, params->device_types, params->dev_types_len); |
| |
| buf_ptr += device_types_len_aligned; |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, probe_resp_len_aligned); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| qdf_mem_copy(buf_ptr, params->probe_resp_tmplt, params->probe_resp_len); |
| |
| WMA_LOGI("%s: Sending WMI_P2P_LO_START command, channel=%d, period=%d, interval=%d, count=%d", |
| __func__, cmd->channel, cmd->period, |
| cmd->interval, cmd->count); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, |
| buf, len, |
| WMI_P2P_LISTEN_OFFLOAD_START_CMDID); |
| if (ret) { |
| WMA_LOGE("Failed to send p2p lo start: %d", ret); |
| wmi_buf_free(buf); |
| } |
| |
| WMA_LOGI("%s: Successfully sent WMI_P2P_LO_START", __func__); |
| wma->interfaces[params->vdev_id].p2p_lo_in_progress = true; |
| |
| return ret; |
| } |
| |
| /** |
| * wma_p2p_lo_stop() - P2P listen offload stop |
| * @vdev_id: vdev identifier |
| * |
| * This function sends WMI command to stop P2P listen offload. |
| * |
| * Return: QDF_STATUS enumeration |
| */ |
| QDF_STATUS wma_p2p_lo_stop(u_int32_t vdev_id) |
| { |
| wmi_buf_t buf; |
| wmi_p2p_lo_stop_cmd_fixed_param *cmd; |
| int32_t len; |
| tp_wma_handle wma = cds_get_context(QDF_MODULE_ID_WMA); |
| int ret; |
| |
| if (NULL == wma) { |
| WMA_LOGE("%s: wma context is NULL", __func__); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| len = sizeof(*cmd); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: failed to allocate memory for p2p lo stop", |
| __func__); |
| return QDF_STATUS_E_NOMEM; |
| } |
| cmd = (wmi_p2p_lo_stop_cmd_fixed_param *)wmi_buf_data(buf); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_p2p_lo_stop_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_p2p_lo_stop_cmd_fixed_param)); |
| |
| cmd->vdev_id = vdev_id; |
| |
| WMA_LOGI("%s: Sending WMI_P2P_LO_STOP command", __func__); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, |
| buf, len, |
| WMI_P2P_LISTEN_OFFLOAD_STOP_CMDID); |
| if (ret) { |
| WMA_LOGE("Failed to send p2p lo stop: %d", ret); |
| wmi_buf_free(buf); |
| } |
| |
| WMA_LOGI("%s: Successfully sent WMI_P2P_LO_STOP", __func__); |
| wma->interfaces[vdev_id].p2p_lo_in_progress = false; |
| |
| return ret; |
| } |
| |
| /** |
| * wma_p2p_lo_event_handler() - p2p lo event |
| * @handle: the WMA handle |
| * @event_buf: buffer with the event parameters |
| * @len: length of the buffer |
| * |
| * This function receives P2P listen offload stop event from FW and |
| * pass the event information to upper layer. |
| * |
| * Return: 0 on success |
| */ |
| int wma_p2p_lo_event_handler(void *handle, uint8_t *event_buf, |
| uint32_t len) |
| { |
| tp_wma_handle wma = cds_get_context(QDF_MODULE_ID_WMA); |
| struct sir_p2p_lo_event *event; |
| WMI_P2P_LISTEN_OFFLOAD_STOPPED_EVENTID_param_tlvs *param_tlvs; |
| wmi_p2p_lo_stopped_event_fixed_param *fix_param; |
| tpAniSirGlobal p_mac = cds_get_context(QDF_MODULE_ID_PE); |
| |
| if (!wma) { |
| WMA_LOGE("%s: Invalid WMA Context", __func__); |
| return -EINVAL; |
| } |
| |
| if (!p_mac) { |
| WMA_LOGE("%s: Invalid p_mac", __func__); |
| return -EINVAL; |
| } |
| |
| if (!p_mac->sme.p2p_lo_event_callback) { |
| WMA_LOGE("%s: Callback not registered", __func__); |
| return -EINVAL; |
| } |
| |
| param_tlvs = (WMI_P2P_LISTEN_OFFLOAD_STOPPED_EVENTID_param_tlvs *) |
| event_buf; |
| fix_param = param_tlvs->fixed_param; |
| event = qdf_mem_malloc(sizeof(*event)); |
| if (event == NULL) { |
| WMA_LOGE("Event allocation failed"); |
| return -ENOMEM; |
| } |
| event->vdev_id = fix_param->vdev_id; |
| event->reason_code = fix_param->reason; |
| |
| p_mac->sme.p2p_lo_event_callback(p_mac->hHdd, event); |
| |
| wma->interfaces[event->vdev_id].p2p_lo_in_progress = false; |
| |
| return 0; |
| } |
| |
| /** |
| * wma_get_wakelock_stats() - Populates wake lock stats |
| * @stats: non-null wakelock structure to populate |
| * |
| * This function collects wake lock stats |
| * |
| * Return: QDF_STATUS_SUCCESS on success, error value otherwise |
| */ |
| QDF_STATUS wma_get_wakelock_stats(struct sir_wake_lock_stats *stats) |
| { |
| t_wma_handle *wma; |
| struct sir_vdev_wow_stats *vstats; |
| int i; |
| |
| if (!stats) { |
| WMA_LOGE("%s: invalid stats pointer", __func__); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| wma = cds_get_context(QDF_MODULE_ID_WMA); |
| if (!wma) { |
| WMA_LOGE("%s: invalid WMA context", __func__); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| /* ensure counters are zeroed */ |
| qdf_mem_zero(stats, sizeof(*stats)); |
| |
| /* populate global level stats */ |
| stats->wow_unspecified_wake_up_count = wma->wow_unspecified_wake_count; |
| |
| /* populate vdev level stats */ |
| for (i = 0; i < wma->max_bssid; ++i) { |
| if (!wma->interfaces[i].handle) |
| continue; |
| |
| vstats = &wma->interfaces[i].wow_stats; |
| |
| stats->wow_ucast_wake_up_count += vstats->ucast; |
| stats->wow_bcast_wake_up_count += vstats->bcast; |
| stats->wow_ipv4_mcast_wake_up_count += vstats->ipv4_mcast; |
| stats->wow_ipv6_mcast_wake_up_count += vstats->ipv6_mcast; |
| stats->wow_ipv6_mcast_ra_stats += vstats->ipv6_mcast_ra; |
| stats->wow_ipv6_mcast_ns_stats += vstats->ipv6_mcast_ns; |
| stats->wow_ipv6_mcast_na_stats += vstats->ipv6_mcast_na; |
| stats->wow_icmpv4_count += vstats->icmpv4; |
| stats->wow_icmpv6_count += vstats->icmpv6; |
| stats->wow_rssi_breach_wake_up_count += vstats->rssi_breach; |
| stats->wow_low_rssi_wake_up_count += vstats->low_rssi; |
| stats->wow_gscan_wake_up_count += vstats->gscan; |
| stats->wow_pno_complete_wake_up_count += vstats->pno_complete; |
| stats->wow_pno_match_wake_up_count += vstats->pno_match; |
| stats->wow_oem_response_wake_up_count += vstats->oem_response; |
| } |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_process_fw_test_cmd() - send unit test command to fw. |
| * @handle: wma handle |
| * @wma_fwtest: fw test command |
| * |
| * This function send fw test command to fw. |
| * |
| * Return: none |
| */ |
| void wma_process_fw_test_cmd(WMA_HANDLE handle, |
| struct set_fwtest_params *wma_fwtest) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue fw test cmd", |
| __func__); |
| return; |
| } |
| |
| if (wmi_unified_fw_test_cmd(wma_handle->wmi_handle, |
| (struct set_fwtest_params *)wma_fwtest)) { |
| WMA_LOGE("%s: Failed to issue fw test cmd", |
| __func__); |
| return; |
| } |
| } |
| |
| /** |
| * wma_enable_disable_caevent_ind() - Issue WMI command to enable or |
| * disable ca event indication |
| * @wma: wma handler |
| * @val: boolean value true or false |
| * |
| * Return: QDF_STATUS |
| */ |
| QDF_STATUS wma_enable_disable_caevent_ind(tp_wma_handle wma, uint8_t val) |
| { |
| WMI_CHAN_AVOID_RPT_ALLOW_CMD_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| uint8_t *buf_ptr; |
| uint32_t len; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE(FL("WMA is closed, can not issue set/clear CA")); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| len = sizeof(*cmd); |
| wmi_buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE(FL("wmi_buf_alloc failed")); |
| return QDF_STATUS_E_NOMEM; |
| } |
| buf_ptr = (uint8_t *) wmi_buf_data(wmi_buf); |
| cmd = (WMI_CHAN_AVOID_RPT_ALLOW_CMD_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_WMI_CHAN_AVOID_RPT_ALLOW_CMD_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| WMI_CHAN_AVOID_RPT_ALLOW_CMD_fixed_param)); |
| cmd->rpt_allow = val; |
| if (wmi_unified_cmd_send(wma->wmi_handle, wmi_buf, len, |
| WMI_CHAN_AVOID_RPT_ALLOW_CMDID)) { |
| WMA_LOGE(FL("Failed to send enable/disable CA event command")); |
| wmi_buf_free(wmi_buf); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| QDF_STATUS wma_set_sar_limit(WMA_HANDLE handle, |
| struct sar_limit_cmd_params *sar_limit_params) |
| { |
| int ret; |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue set sar limit msg", |
| __func__); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| if (sar_limit_params == NULL) { |
| WMA_LOGE("%s: set sar limit ptr NULL", |
| __func__); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| ret = wmi_unified_send_sar_limit_cmd(wma->wmi_handle, |
| sar_limit_params); |
| |
| return ret; |
| } |
| |
| #ifdef WLAN_FEATURE_DISA |
| /** |
| * wma_encrypt_decrypt_msg() - |
| * @encrypt_decrypt_params: encryption/decryption params |
| * @data_len: data length |
| * @encrypt_decrypt_cb: encrypt/decrypt callback |
| * |
| * This function sends WMI command to check encryption/decryption engine. |
| * |
| * Return: QDF_STATUS enumeration |
| */ |
| QDF_STATUS wma_encrypt_decrypt_msg(WMA_HANDLE handle, |
| struct encrypt_decrypt_req_params *encrypt_decrypt_params) |
| { |
| int ret; |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue encrypt/decrypt msg", |
| __func__); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| if (encrypt_decrypt_params == NULL) { |
| WMA_LOGE("%s: encrypt/decrypt ptr NULL", |
| __func__); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| ret = wmi_unified_encrypt_decrypt_send_cmd(wma->wmi_handle, |
| encrypt_decrypt_params); |
| |
| return ret; |
| } |
| |
| /** |
| * wma_encrypt_decrypt_msg_handler() - handle encrypt/decrypt data |
| * indicated by FW |
| * @handle: wma context |
| * @data: event buffer |
| * @data len: length of event buffer |
| * |
| * Return: 0 on success |
| */ |
| int wma_encrypt_decrypt_msg_handler(void *handle, uint8_t *data, |
| uint32_t data_len) |
| { |
| WMI_VDEV_ENCRYPT_DECRYPT_DATA_RESP_EVENTID_param_tlvs *param_buf; |
| wmi_vdev_encrypt_decrypt_data_resp_event_fixed_param *data_event; |
| struct sir_encrypt_decrypt_rsp_params encrypt_decrypt_rsp_params; |
| tp_wma_handle wma = handle; |
| u_int8_t *buf_ptr; |
| tpAniSirGlobal pmac; |
| |
| if (data == NULL) { |
| WMA_LOGE("%s: invalid pointer", __func__); |
| return -EINVAL; |
| } |
| |
| if (wma == NULL) { |
| WMA_LOGE("%s: wma context is NULL", __func__); |
| return -EINVAL; |
| } |
| |
| WMA_LOGE("%s: received WMI_VDEV_ENCRYPT_DECRYPT_DATA_RESP_EVENTID ", |
| __func__); |
| |
| pmac = (tpAniSirGlobal)cds_get_context(QDF_MODULE_ID_PE); |
| |
| if (!pmac) { |
| WMA_LOGE("%s: Invalid pmac", __func__); |
| return -EINVAL; |
| } |
| if (!pmac->sme.encrypt_decrypt_cb) { |
| WMA_LOGE("%s: Callback not registered", __func__); |
| return -EINVAL; |
| } |
| |
| param_buf = |
| (WMI_VDEV_ENCRYPT_DECRYPT_DATA_RESP_EVENTID_param_tlvs *)data; |
| if (!param_buf) { |
| WMA_LOGE("%s: Invalid response data buf", __func__); |
| return -EINVAL; |
| } |
| |
| data_event = param_buf->fixed_param; |
| |
| encrypt_decrypt_rsp_params.vdev_id = data_event->vdev_id; |
| encrypt_decrypt_rsp_params.status = data_event->status; |
| encrypt_decrypt_rsp_params.data_length = data_event->data_length; |
| |
| if (encrypt_decrypt_rsp_params.data_length) { |
| buf_ptr = |
| (uint8_t *)data_event + |
| sizeof( |
| wmi_vdev_encrypt_decrypt_data_resp_event_fixed_param) + |
| WMI_TLV_HDR_SIZE; |
| |
| encrypt_decrypt_rsp_params.data = buf_ptr; |
| } |
| |
| pmac->sme.encrypt_decrypt_cb(pmac->sme.encrypt_decrypt_context, |
| &encrypt_decrypt_rsp_params); |
| |
| return 0; |
| } |
| #endif |
| |
| /** |
| * wma_unified_power_debug_stats_event_handler() - WMA handler function to |
| * handle Power stats event from firmware |
| * @handle: Pointer to wma handle |
| * @cmd_param_info: Pointer to Power stats event TLV |
| * @len: Length of the cmd_param_info |
| * |
| * Return: 0 on success, error number otherwise |
| */ |
| #ifdef WLAN_POWER_DEBUGFS |
| int wma_unified_power_debug_stats_event_handler(void *handle, |
| uint8_t *cmd_param_info, uint32_t len) |
| { |
| WMI_PDEV_CHIP_POWER_STATS_EVENTID_param_tlvs *param_tlvs; |
| struct power_stats_response *power_stats_results; |
| wmi_pdev_chip_power_stats_event_fixed_param *param_buf; |
| uint32_t power_stats_len, stats_registers_len, *debug_registers; |
| |
| tpAniSirGlobal mac = (tpAniSirGlobal)cds_get_context(QDF_MODULE_ID_PE); |
| |
| param_tlvs = |
| (WMI_PDEV_CHIP_POWER_STATS_EVENTID_param_tlvs *) cmd_param_info; |
| |
| param_buf = (wmi_pdev_chip_power_stats_event_fixed_param *) |
| param_tlvs->fixed_param; |
| if (!mac || !mac->sme.power_stats_resp_callback) { |
| WMA_LOGD("%s: NULL mac ptr or HDD callback is null", __func__); |
| return -EINVAL; |
| } |
| |
| if (!param_buf) { |
| WMA_LOGD("%s: NULL power stats event fixed param", __func__); |
| return -EINVAL; |
| } |
| |
| debug_registers = param_tlvs->debug_registers; |
| stats_registers_len = |
| (sizeof(uint32_t) * param_buf->num_debug_register); |
| power_stats_len = stats_registers_len + sizeof(*power_stats_results); |
| power_stats_results = qdf_mem_malloc(power_stats_len); |
| if (!power_stats_results) { |
| WMA_LOGD("%s: could not allocate mem for power stats results", |
| __func__); |
| return -ENOMEM; |
| } |
| WMA_LOGD("Cumulative sleep time %d cumulative total on time %d deep sleep enter counter %d last deep sleep enter tstamp ts %d debug registers fmt %d num debug register %d", |
| param_buf->cumulative_sleep_time_ms, |
| param_buf->cumulative_total_on_time_ms, |
| param_buf->deep_sleep_enter_counter, |
| param_buf->last_deep_sleep_enter_tstamp_ms, |
| param_buf->debug_register_fmt, |
| param_buf->num_debug_register); |
| |
| power_stats_results->cumulative_sleep_time_ms |
| = param_buf->cumulative_sleep_time_ms; |
| power_stats_results->cumulative_total_on_time_ms |
| = param_buf->cumulative_total_on_time_ms; |
| power_stats_results->deep_sleep_enter_counter |
| = param_buf->deep_sleep_enter_counter; |
| power_stats_results->last_deep_sleep_enter_tstamp_ms |
| = param_buf->last_deep_sleep_enter_tstamp_ms; |
| power_stats_results->debug_register_fmt |
| = param_buf->debug_register_fmt; |
| power_stats_results->num_debug_register |
| = param_buf->num_debug_register; |
| |
| power_stats_results->debug_registers |
| = (uint32_t *)(power_stats_results + 1); |
| |
| qdf_mem_copy(power_stats_results->debug_registers, |
| debug_registers, stats_registers_len); |
| |
| mac->sme.power_stats_resp_callback(power_stats_results, |
| mac->sme.power_debug_stats_context); |
| qdf_mem_free(power_stats_results); |
| return 0; |
| } |
| #else |
| int wma_unified_power_debug_stats_event_handler(void *handle, |
| uint8_t *cmd_param_info, uint32_t len) |
| { |
| return 0; |
| } |
| #endif |
| |
| int wma_chan_info_event_handler(void *handle, uint8_t *event_buf, |
| uint32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle)handle; |
| WMI_CHAN_INFO_EVENTID_param_tlvs *param_buf; |
| wmi_chan_info_event_fixed_param *event; |
| struct scan_chan_info buf; |
| tpAniSirGlobal mac = NULL; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| |
| if (wma != NULL && wma->cds_context != NULL) |
| mac = (tpAniSirGlobal)cds_get_context(QDF_MODULE_ID_PE); |
| |
| if (!mac) { |
| WMA_LOGE("%s: Invalid mac context", __func__); |
| return -EINVAL; |
| } |
| |
| WMA_LOGD("%s: monitor:%d", __func__, mac->snr_monitor_enabled); |
| if (mac->snr_monitor_enabled && mac->chan_info_cb) { |
| param_buf = |
| (WMI_CHAN_INFO_EVENTID_param_tlvs *)event_buf; |
| if (!param_buf) { |
| WMA_LOGA("%s: Invalid chan info event", __func__); |
| return -EINVAL; |
| } |
| |
| event = param_buf->fixed_param; |
| if (!event) { |
| WMA_LOGA("%s: Invalid fixed param", __func__); |
| return -EINVAL; |
| } |
| buf.tx_frame_count = event->tx_frame_cnt; |
| buf.clock_freq = event->mac_clk_mhz; |
| buf.cmd_flag = event->cmd_flags; |
| buf.freq = event->freq; |
| buf.noise_floor = event->noise_floor; |
| buf.cycle_count = event->cycle_count; |
| buf.rx_clear_count = event->rx_clear_count; |
| mac->chan_info_cb(&buf); |
| } |
| |
| return 0; |
| } |