Update qca-vendor_copy.h to the latest qca-vendor.h
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
diff --git a/qca-vendor_copy.h b/qca-vendor_copy.h
index ed8fb3a..eabf689 100644
--- a/qca-vendor_copy.h
+++ b/qca-vendor_copy.h
@@ -5356,6 +5356,24 @@
QCA_WLAN_HE_LTF_4X = 3,
};
+/**
+ * enum qca_wlan_he_mac_padding_dur - HE trigger frame MAC padding duration
+ *
+ * Indicates the HE trigger frame MAC padding duration value.
+ *
+ * @QCA_WLAN_HE_NO_ADDITIONAL_PROCESS_TIME: no additional time required to
+ * process the trigger frame.
+ * @QCA_WLAN_HE_8US_OF_PROCESS_TIME: indicates the 8us of processing time for
+ * trigger frame.
+ * @QCA_WLAN_HE_16US_OF_PROCESS_TIME: indicates the 16us of processing time for
+ * trigger frame.
+ */
+enum qca_wlan_he_mac_padding_dur {
+ QCA_WLAN_HE_NO_ADDITIONAL_PROCESS_TIME = 0,
+ QCA_WLAN_HE_8US_OF_PROCESS_TIME = 1,
+ QCA_WLAN_HE_16US_OF_PROCESS_TIME = 2,
+};
+
/* Attributes for data used by
* QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION
*/
@@ -5455,6 +5473,64 @@
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ENABLE_TX_BEAMFORMEE = 13,
+ /* 8-bit unsigned value to configure the tx beamformee number
+ * of space-time streams.
+ * This attribute is used to configure the testbed device.
+ * The range of the value is 0 to 8.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_TX_BEAMFORMEE_NSTS = 14,
+
+ /* 8-bit unsigned value to configure the MU EDCA params for given AC
+ * This attribute is used to configure the testbed device.
+ * Uses the enum qca_wlan_ac_type values.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_AC = 15,
+
+ /* 8-bit unsigned value to configure the MU EDCA AIFSN for given AC
+ * To configure MU EDCA AIFSN value, MU EDCA access category value
+ * is required to process the command.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_AIFSN = 16,
+
+ /* 8-bit unsigned value to configure the MU EDCA ECW min value for
+ * given AC.
+ * To configure MU EDCA ECW min value, MU EDCA access category value
+ * is required to process the command.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_ECWMIN = 17,
+
+ /* 8-bit unsigned value to configure the MU EDCA ECW max value for
+ * given AC.
+ * To configure MU EDCA ECW max value, MU EDCA access category value
+ * is required to process the command.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_ECWMAX = 18,
+
+ /* 8-bit unsigned value to configure the MU EDCA timer for given AC
+ * To configure MU EDCA timer value, MU EDCA access category value
+ * is required to process the command.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_TIMER = 19,
+
+ /* 8-bit unsigned value to configure the HE trigger frame MAC padding
+ * duration.
+ * This attribute is used to configure the testbed device.
+ * Uses the enum qca_wlan_he_mac_padding_dur values.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MAC_PADDING_DUR = 20,
+
+ /* 8-bit unsigned value to override the MU EDCA params to defaults
+ * regardless of the AP beacon MU EDCA params. If it is enabled use
+ * the default values else use the MU EDCA params from AP beacon.
+ * This attribute is used to configure the testbed device.
+ * 1-enable, 0-disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OVERRIDE_MU_EDCA = 21,
+
/* keep last */
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX =