[opaque pointer type] Add textual IR support for explicit type parameter to the call instruction
See r230786 and r230794 for similar changes to gep and load
respectively.
Call is a bit different because it often doesn't have a single explicit
type - usually the type is deduced from the arguments, and just the
return type is explicit. In those cases there's no need to change the
IR.
When that's not the case, the IR usually contains the pointer type of
the first operand - but since typed pointers are going away, that
representation is insufficient so I'm just stripping the "pointerness"
of the explicit type away.
This does make the IR a bit weird - it /sort of/ reads like the type of
the first operand: "call void () %x(" but %x is actually of type "void
()*" and will eventually be just of type "ptr". But this seems not too
bad and I don't think it would benefit from repeating the type
("void (), void () * %x(" and then eventually "void (), ptr %x(") as has
been done with gep and load.
This also has a side benefit: since the explicit type is no longer a
pointer, there's no ambiguity between an explicit type and a function
that returns a function pointer. Previously this case needed an explicit
type (eg: a function returning a void() function was written as
"call void () () * @x(" rather than "call void () * @x(" because of the
ambiguity between a function returning a pointer to a void() function
and a function returning void).
No ambiguity means even function pointer return types can just be
written alone, without writing the whole function's type.
This leaves /only/ the varargs case where the explicit type is required.
Given the special type syntax in call instructions, the regex-fu used
for migration was a bit more involved in its own unique way (as every
one of these is) so here it is. Use it in conjunction with the apply.sh
script and associated find/xargs commands I've provided in rr230786 to
migrate your out of tree tests. Do let me know if any of this doesn't
cover your cases & we can iterate on a more general script/regexes to
help others with out of tree tests.
About 9 test cases couldn't be automatically migrated - half of those
were functions returning function pointers, where I just had to manually
delete the function argument types now that we didn't need an explicit
function type there. The other half were typedefs of function types used
in calls - just had to manually drop the * from those.
import fileinput
import sys
import re
pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)')
addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$")
func_end = re.compile("(?:void.*|\)\s*)\*$")
def conv(match, line):
if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)):
return line
return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():]
for line in sys.stdin:
sys.stdout.write(conv(re.search(pat, line), line))
llvm-svn: 235145
diff --git a/llvm/test/DebugInfo/2009-11-10-CurrentFn.ll b/llvm/test/DebugInfo/2009-11-10-CurrentFn.ll
index 2fc710a..f6255ec 100644
--- a/llvm/test/DebugInfo/2009-11-10-CurrentFn.ll
+++ b/llvm/test/DebugInfo/2009-11-10-CurrentFn.ll
@@ -2,7 +2,7 @@
define void @bar(i32 %i) nounwind uwtable ssp {
entry:
- tail call void (...)* @foo() nounwind, !dbg !14
+ tail call void (...) @foo() nounwind, !dbg !14
ret void, !dbg !16
}
diff --git a/llvm/test/DebugInfo/Mips/fn-call-line.ll b/llvm/test/DebugInfo/Mips/fn-call-line.ll
index 2252c20..ad90fa8 100644
--- a/llvm/test/DebugInfo/Mips/fn-call-line.ll
+++ b/llvm/test/DebugInfo/Mips/fn-call-line.ll
@@ -54,8 +54,8 @@
; Function Attrs: nounwind uwtable
define void @f2() #0 {
entry:
- call void (...)* @f1(), !dbg !11
- call void (...)* @f1(), !dbg !12
+ call void (...) @f1(), !dbg !11
+ call void (...) @f1(), !dbg !12
ret void, !dbg !13
}
diff --git a/llvm/test/DebugInfo/Sparc/gnu-window-save.ll b/llvm/test/DebugInfo/Sparc/gnu-window-save.ll
index 73c5b87..f18c6ce 100644
--- a/llvm/test/DebugInfo/Sparc/gnu-window-save.ll
+++ b/llvm/test/DebugInfo/Sparc/gnu-window-save.ll
@@ -42,7 +42,7 @@
entry:
%retval = alloca i32, align 4
store i32 0, i32* %retval
- %call = call signext i32 (i8*, ...)* @printf(i8* getelementptr inbounds ([14 x i8], [14 x i8]* @.str, i32 0, i32 0)), !dbg !12
+ %call = call signext i32 (i8*, ...) @printf(i8* getelementptr inbounds ([14 x i8], [14 x i8]* @.str, i32 0, i32 0)), !dbg !12
ret i32 0, !dbg !13
}
diff --git a/llvm/test/DebugInfo/SystemZ/variable-loc.ll b/llvm/test/DebugInfo/SystemZ/variable-loc.ll
index 620afe5..e7987fc 100644
--- a/llvm/test/DebugInfo/SystemZ/variable-loc.ll
+++ b/llvm/test/DebugInfo/SystemZ/variable-loc.ll
@@ -43,7 +43,7 @@
%call = call i32 @sum_array(i32* %arraydecay1, i32 100), !dbg !26
store i32 %call, i32* %val, align 4, !dbg !26
%0 = load i32, i32* %val, align 4, !dbg !27
- %call2 = call i32 (i8*, ...)* @printf(i8* getelementptr inbounds ([13 x i8], [13 x i8]* @.str, i32 0, i32 0), i32 %0), !dbg !27
+ %call2 = call i32 (i8*, ...) @printf(i8* getelementptr inbounds ([13 x i8], [13 x i8]* @.str, i32 0, i32 0), i32 %0), !dbg !27
ret i32 0, !dbg !28
}
diff --git a/llvm/test/DebugInfo/X86/block-capture.ll b/llvm/test/DebugInfo/X86/block-capture.ll
index f78915f..314879b 100644
--- a/llvm/test/DebugInfo/X86/block-capture.ll
+++ b/llvm/test/DebugInfo/X86/block-capture.ll
@@ -45,7 +45,7 @@
%3 = bitcast %struct.__block_literal_generic* %block.literal to i8*, !dbg !71
%4 = load i8*, i8** %2, !dbg !71
%5 = bitcast i8* %4 to void (i8*, ...)*, !dbg !71
- call void (i8*, ...)* %5(i8* %3), !dbg !71
+ call void (i8*, ...) %5(i8* %3), !dbg !71
ret void, !dbg !73
}
diff --git a/llvm/test/DebugInfo/X86/dbg-value-const-byref.ll b/llvm/test/DebugInfo/X86/dbg-value-const-byref.ll
index f8453a5..766b72e 100644
--- a/llvm/test/DebugInfo/X86/dbg-value-const-byref.ll
+++ b/llvm/test/DebugInfo/X86/dbg-value-const-byref.ll
@@ -53,7 +53,7 @@
call void @llvm.dbg.value(metadata i32 3, i64 0, metadata !10, metadata !MDExpression()), !dbg !15
%call = call i32 @f3(i32 3) #3, !dbg !16
call void @llvm.dbg.value(metadata i32 7, i64 0, metadata !10, metadata !MDExpression()), !dbg !18
- %call1 = call i32 (...)* @f1() #3, !dbg !19
+ %call1 = call i32 (...) @f1() #3, !dbg !19
call void @llvm.dbg.value(metadata i32 %call1, i64 0, metadata !10, metadata !MDExpression()), !dbg !19
store i32 %call1, i32* %i, align 4, !dbg !19, !tbaa !20
call void @llvm.dbg.value(metadata i32* %i, i64 0, metadata !10, metadata !MDExpression()), !dbg !24
diff --git a/llvm/test/DebugInfo/X86/dbg-value-range.ll b/llvm/test/DebugInfo/X86/dbg-value-range.ll
index 047a176..df1ab7b 100644
--- a/llvm/test/DebugInfo/X86/dbg-value-range.ll
+++ b/llvm/test/DebugInfo/X86/dbg-value-range.ll
@@ -8,7 +8,7 @@
%tmp1 = getelementptr inbounds %struct.a, %struct.a* %b, i64 0, i32 0, !dbg !14
%tmp2 = load i32, i32* %tmp1, align 4, !dbg !14
tail call void @llvm.dbg.value(metadata i32 %tmp2, i64 0, metadata !11, metadata !MDExpression()), !dbg !14
- %call = tail call i32 (...)* @foo(i32 %tmp2) nounwind , !dbg !18
+ %call = tail call i32 (...) @foo(i32 %tmp2) nounwind , !dbg !18
%add = add nsw i32 %tmp2, 1, !dbg !19
ret i32 %add, !dbg !19
}
diff --git a/llvm/test/DebugInfo/X86/formal_parameter.ll b/llvm/test/DebugInfo/X86/formal_parameter.ll
index ba89ac4..97f45ec 100644
--- a/llvm/test/DebugInfo/X86/formal_parameter.ll
+++ b/llvm/test/DebugInfo/X86/formal_parameter.ll
@@ -29,7 +29,7 @@
%map.addr = alloca i32, align 4
store i32 %map, i32* %map.addr, align 4, !tbaa !15
call void @llvm.dbg.declare(metadata i32* %map.addr, metadata !10, metadata !MDExpression()), !dbg !14
- %call = call i32 (i32*, ...)* bitcast (i32 (...)* @lookup to i32 (i32*, ...)*)(i32* %map.addr) #3, !dbg !19
+ %call = call i32 (i32*, ...) bitcast (i32 (...)* @lookup to i32 (i32*, ...)*)(i32* %map.addr) #3, !dbg !19
; Ensure that all dbg intrinsics have the same scope after
; LowerDbgDeclare is finished with them.
;
@@ -37,7 +37,7 @@
; LOWERING: call void @llvm.dbg.value{{.*}}, !dbg ![[LOC]]
; LOWERING: call void @llvm.dbg.value{{.*}}, !dbg ![[LOC]]
%0 = load i32, i32* %map.addr, align 4, !dbg !20, !tbaa !15
- %call1 = call i32 (i32, ...)* bitcast (i32 (...)* @verify to i32 (i32, ...)*)(i32 %0) #3, !dbg !20
+ %call1 = call i32 (i32, ...) bitcast (i32 (...)* @verify to i32 (i32, ...)*)(i32 %0) #3, !dbg !20
ret void, !dbg !22
}
diff --git a/llvm/test/DebugInfo/X86/rvalue-ref.ll b/llvm/test/DebugInfo/X86/rvalue-ref.ll
index daf58c1..c6f0007 100644
--- a/llvm/test/DebugInfo/X86/rvalue-ref.ll
+++ b/llvm/test/DebugInfo/X86/rvalue-ref.ll
@@ -12,7 +12,7 @@
call void @llvm.dbg.declare(metadata i32** %i.addr, metadata !11, metadata !MDExpression()), !dbg !12
%0 = load i32*, i32** %i.addr, align 8, !dbg !13
%1 = load i32, i32* %0, align 4, !dbg !13
- %call = call i32 (i8*, ...)* @printf(i8* getelementptr inbounds ([4 x i8], [4 x i8]* @.str, i32 0, i32 0), i32 %1), !dbg !13
+ %call = call i32 (i8*, ...) @printf(i8* getelementptr inbounds ([4 x i8], [4 x i8]* @.str, i32 0, i32 0), i32 %1), !dbg !13
ret void, !dbg !15
}
diff --git a/llvm/test/DebugInfo/X86/subregisters.ll b/llvm/test/DebugInfo/X86/subregisters.ll
index 5e71d05..41691d2 100644
--- a/llvm/test/DebugInfo/X86/subregisters.ll
+++ b/llvm/test/DebugInfo/X86/subregisters.ll
@@ -44,7 +44,7 @@
%a1 = getelementptr inbounds %struct.bar, %struct.bar* %b, i64 0, i32 0, !dbg !26
%0 = load i32, i32* %a1, align 4, !dbg !26, !tbaa !27
tail call void @llvm.dbg.value(metadata i32 %0, i64 0, metadata !16, metadata !MDExpression()), !dbg !26
- %call = tail call i32 (i8*, ...)* @printf(i8* getelementptr inbounds ([4 x i8], [4 x i8]* @.str, i64 0, i64 0), i32 %0) #4, !dbg !32
+ %call = tail call i32 (i8*, ...) @printf(i8* getelementptr inbounds ([4 x i8], [4 x i8]* @.str, i64 0, i64 0), i32 %0) #4, !dbg !32
ret void, !dbg !33
}
diff --git a/llvm/test/DebugInfo/multiline.ll b/llvm/test/DebugInfo/multiline.ll
index d31cc95..1fa5979 100644
--- a/llvm/test/DebugInfo/multiline.ll
+++ b/llvm/test/DebugInfo/multiline.ll
@@ -44,12 +44,12 @@
; Function Attrs: nounwind uwtable
define void @f2() #0 {
entry:
- call void (...)* @f1(), !dbg !11
- call void (...)* @f1(), !dbg !12
- call void (...)* @f1(), !dbg !13
- call void (...)* @f1(), !dbg !14
- call void (...)* @f1(), !dbg !15
- call void (...)* @f1(), !dbg !16
+ call void (...) @f1(), !dbg !11
+ call void (...) @f1(), !dbg !12
+ call void (...) @f1(), !dbg !13
+ call void (...) @f1(), !dbg !14
+ call void (...) @f1(), !dbg !15
+ call void (...) @f1(), !dbg !16
ret void, !dbg !17
}