|  | //===- DemoteRegToStack.cpp - Move a virtual register to the stack --------===// | 
|  | // | 
|  | // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. | 
|  | // See https://llvm.org/LICENSE.txt for license information. | 
|  | // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception | 
|  | // | 
|  | //===----------------------------------------------------------------------===// | 
|  |  | 
|  | #include "llvm/ADT/DenseMap.h" | 
|  | #include "llvm/Analysis/CFG.h" | 
|  | #include "llvm/Transforms/Utils/Local.h" | 
|  | #include "llvm/IR/Function.h" | 
|  | #include "llvm/IR/Instructions.h" | 
|  | #include "llvm/IR/Type.h" | 
|  | #include "llvm/Transforms/Utils/BasicBlockUtils.h" | 
|  | using namespace llvm; | 
|  |  | 
|  | /// DemoteRegToStack - This function takes a virtual register computed by an | 
|  | /// Instruction and replaces it with a slot in the stack frame, allocated via | 
|  | /// alloca.  This allows the CFG to be changed around without fear of | 
|  | /// invalidating the SSA information for the value.  It returns the pointer to | 
|  | /// the alloca inserted to create a stack slot for I. | 
|  | AllocaInst *llvm::DemoteRegToStack(Instruction &I, bool VolatileLoads, | 
|  | Instruction *AllocaPoint) { | 
|  | if (I.use_empty()) { | 
|  | I.eraseFromParent(); | 
|  | return nullptr; | 
|  | } | 
|  |  | 
|  | Function *F = I.getParent()->getParent(); | 
|  | const DataLayout &DL = F->getParent()->getDataLayout(); | 
|  |  | 
|  | // Create a stack slot to hold the value. | 
|  | AllocaInst *Slot; | 
|  | if (AllocaPoint) { | 
|  | Slot = new AllocaInst(I.getType(), DL.getAllocaAddrSpace(), nullptr, | 
|  | I.getName()+".reg2mem", AllocaPoint); | 
|  | } else { | 
|  | Slot = new AllocaInst(I.getType(), DL.getAllocaAddrSpace(), nullptr, | 
|  | I.getName() + ".reg2mem", &F->getEntryBlock().front()); | 
|  | } | 
|  |  | 
|  | // We cannot demote invoke instructions to the stack if their normal edge | 
|  | // is critical. Therefore, split the critical edge and create a basic block | 
|  | // into which the store can be inserted. | 
|  | if (InvokeInst *II = dyn_cast<InvokeInst>(&I)) { | 
|  | if (!II->getNormalDest()->getSinglePredecessor()) { | 
|  | unsigned SuccNum = GetSuccessorNumber(II->getParent(), II->getNormalDest()); | 
|  | assert(isCriticalEdge(II, SuccNum) && "Expected a critical edge!"); | 
|  | BasicBlock *BB = SplitCriticalEdge(II, SuccNum); | 
|  | assert(BB && "Unable to split critical edge."); | 
|  | (void)BB; | 
|  | } | 
|  | } | 
|  |  | 
|  | // Change all of the users of the instruction to read from the stack slot. | 
|  | while (!I.use_empty()) { | 
|  | Instruction *U = cast<Instruction>(I.user_back()); | 
|  | if (PHINode *PN = dyn_cast<PHINode>(U)) { | 
|  | // If this is a PHI node, we can't insert a load of the value before the | 
|  | // use.  Instead insert the load in the predecessor block corresponding | 
|  | // to the incoming value. | 
|  | // | 
|  | // Note that if there are multiple edges from a basic block to this PHI | 
|  | // node that we cannot have multiple loads. The problem is that the | 
|  | // resulting PHI node will have multiple values (from each load) coming in | 
|  | // from the same block, which is illegal SSA form. For this reason, we | 
|  | // keep track of and reuse loads we insert. | 
|  | DenseMap<BasicBlock*, Value*> Loads; | 
|  | for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i) | 
|  | if (PN->getIncomingValue(i) == &I) { | 
|  | Value *&V = Loads[PN->getIncomingBlock(i)]; | 
|  | if (!V) { | 
|  | // Insert the load into the predecessor block | 
|  | V = new LoadInst(I.getType(), Slot, I.getName() + ".reload", | 
|  | VolatileLoads, | 
|  | PN->getIncomingBlock(i)->getTerminator()); | 
|  | } | 
|  | PN->setIncomingValue(i, V); | 
|  | } | 
|  |  | 
|  | } else { | 
|  | // If this is a normal instruction, just insert a load. | 
|  | Value *V = new LoadInst(I.getType(), Slot, I.getName() + ".reload", | 
|  | VolatileLoads, U); | 
|  | U->replaceUsesOfWith(&I, V); | 
|  | } | 
|  | } | 
|  |  | 
|  | // Insert stores of the computed value into the stack slot. We have to be | 
|  | // careful if I is an invoke instruction, because we can't insert the store | 
|  | // AFTER the terminator instruction. | 
|  | BasicBlock::iterator InsertPt; | 
|  | if (!I.isTerminator()) { | 
|  | InsertPt = ++I.getIterator(); | 
|  | for (; isa<PHINode>(InsertPt) || InsertPt->isEHPad(); ++InsertPt) | 
|  | /* empty */;   // Don't insert before PHI nodes or landingpad instrs. | 
|  | } else { | 
|  | InvokeInst &II = cast<InvokeInst>(I); | 
|  | InsertPt = II.getNormalDest()->getFirstInsertionPt(); | 
|  | } | 
|  |  | 
|  | new StoreInst(&I, Slot, &*InsertPt); | 
|  | return Slot; | 
|  | } | 
|  |  | 
|  | /// DemotePHIToStack - This function takes a virtual register computed by a PHI | 
|  | /// node and replaces it with a slot in the stack frame allocated via alloca. | 
|  | /// The PHI node is deleted. It returns the pointer to the alloca inserted. | 
|  | AllocaInst *llvm::DemotePHIToStack(PHINode *P, Instruction *AllocaPoint) { | 
|  | if (P->use_empty()) { | 
|  | P->eraseFromParent(); | 
|  | return nullptr; | 
|  | } | 
|  |  | 
|  | const DataLayout &DL = P->getModule()->getDataLayout(); | 
|  |  | 
|  | // Create a stack slot to hold the value. | 
|  | AllocaInst *Slot; | 
|  | if (AllocaPoint) { | 
|  | Slot = new AllocaInst(P->getType(), DL.getAllocaAddrSpace(), nullptr, | 
|  | P->getName()+".reg2mem", AllocaPoint); | 
|  | } else { | 
|  | Function *F = P->getParent()->getParent(); | 
|  | Slot = new AllocaInst(P->getType(), DL.getAllocaAddrSpace(), nullptr, | 
|  | P->getName() + ".reg2mem", | 
|  | &F->getEntryBlock().front()); | 
|  | } | 
|  |  | 
|  | // Iterate over each operand inserting a store in each predecessor. | 
|  | for (unsigned i = 0, e = P->getNumIncomingValues(); i < e; ++i) { | 
|  | if (InvokeInst *II = dyn_cast<InvokeInst>(P->getIncomingValue(i))) { | 
|  | assert(II->getParent() != P->getIncomingBlock(i) && | 
|  | "Invoke edge not supported yet"); (void)II; | 
|  | } | 
|  | new StoreInst(P->getIncomingValue(i), Slot, | 
|  | P->getIncomingBlock(i)->getTerminator()); | 
|  | } | 
|  |  | 
|  | // Insert a load in place of the PHI and replace all uses. | 
|  | BasicBlock::iterator InsertPt = P->getIterator(); | 
|  |  | 
|  | for (; isa<PHINode>(InsertPt) || InsertPt->isEHPad(); ++InsertPt) | 
|  | /* empty */;   // Don't insert before PHI nodes or landingpad instrs. | 
|  |  | 
|  | Value *V = | 
|  | new LoadInst(P->getType(), Slot, P->getName() + ".reload", &*InsertPt); | 
|  | P->replaceAllUsesWith(V); | 
|  |  | 
|  | // Delete PHI. | 
|  | P->eraseFromParent(); | 
|  | return Slot; | 
|  | } |