//===-- Passes.cpp - Target independent code generation passes ------------===//
//
//                     The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file defines interfaces to access the target independent code
// generation passes provided by the LLVM backend.
//
//===---------------------------------------------------------------------===//

#include "llvm/CodeGen/Passes.h"
#include "llvm/Analysis/Passes.h"
#include "llvm/Analysis/Verifier.h"
#include "llvm/Assembly/PrintModulePass.h"
#include "llvm/CodeGen/GCStrategy.h"
#include "llvm/CodeGen/MachineFunctionPass.h"
#include "llvm/CodeGen/RegAllocRegistry.h"
#include "llvm/MC/MCAsmInfo.h"
#include "llvm/PassManager.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Target/TargetLowering.h"
#include "llvm/Target/TargetOptions.h"
#include "llvm/Target/TargetSubtargetInfo.h"
#include "llvm/Transforms/Scalar.h"

using namespace llvm;

static cl::opt<bool> DisablePostRA("disable-post-ra", cl::Hidden,
    cl::desc("Disable Post Regalloc"));
static cl::opt<bool> DisableBranchFold("disable-branch-fold", cl::Hidden,
    cl::desc("Disable branch folding"));
static cl::opt<bool> DisableTailDuplicate("disable-tail-duplicate", cl::Hidden,
    cl::desc("Disable tail duplication"));
static cl::opt<bool> DisableEarlyTailDup("disable-early-taildup", cl::Hidden,
    cl::desc("Disable pre-register allocation tail duplication"));
static cl::opt<bool> DisableBlockPlacement("disable-block-placement",
    cl::Hidden, cl::desc("Disable the probability-driven block placement, and "
                         "re-enable the old code placement pass"));
static cl::opt<bool> EnableBlockPlacementStats("enable-block-placement-stats",
    cl::Hidden, cl::desc("Collect probability-driven block placement stats"));
static cl::opt<bool> DisableCodePlace("disable-code-place", cl::Hidden,
    cl::desc("Disable code placement"));
static cl::opt<bool> DisableSSC("disable-ssc", cl::Hidden,
    cl::desc("Disable Stack Slot Coloring"));
static cl::opt<bool> DisableMachineDCE("disable-machine-dce", cl::Hidden,
    cl::desc("Disable Machine Dead Code Elimination"));
static cl::opt<bool> DisableEarlyIfConversion("disable-early-ifcvt", cl::Hidden,
    cl::desc("Disable Early If-conversion"));
static cl::opt<bool> DisableMachineLICM("disable-machine-licm", cl::Hidden,
    cl::desc("Disable Machine LICM"));
static cl::opt<bool> DisableMachineCSE("disable-machine-cse", cl::Hidden,
    cl::desc("Disable Machine Common Subexpression Elimination"));
static cl::opt<cl::boolOrDefault>
OptimizeRegAlloc("optimize-regalloc", cl::Hidden,
    cl::desc("Enable optimized register allocation compilation path."));
static cl::opt<cl::boolOrDefault>
EnableMachineSched("enable-misched", cl::Hidden,
    cl::desc("Enable the machine instruction scheduling pass."));
static cl::opt<bool> EnableStrongPHIElim("strong-phi-elim", cl::Hidden,
    cl::desc("Use strong PHI elimination."));
static cl::opt<bool> DisablePostRAMachineLICM("disable-postra-machine-licm",
    cl::Hidden,
    cl::desc("Disable Machine LICM"));
static cl::opt<bool> DisableMachineSink("disable-machine-sink", cl::Hidden,
    cl::desc("Disable Machine Sinking"));
static cl::opt<bool> DisableLSR("disable-lsr", cl::Hidden,
    cl::desc("Disable Loop Strength Reduction Pass"));
static cl::opt<bool> DisableCGP("disable-cgp", cl::Hidden,
    cl::desc("Disable Codegen Prepare"));
static cl::opt<bool> DisableCopyProp("disable-copyprop", cl::Hidden,
    cl::desc("Disable Copy Propagation pass"));
static cl::opt<bool> PrintLSR("print-lsr-output", cl::Hidden,
    cl::desc("Print LLVM IR produced by the loop-reduce pass"));
static cl::opt<bool> PrintISelInput("print-isel-input", cl::Hidden,
    cl::desc("Print LLVM IR input to isel pass"));
static cl::opt<bool> PrintGCInfo("print-gc", cl::Hidden,
    cl::desc("Dump garbage collector data"));
static cl::opt<bool> VerifyMachineCode("verify-machineinstrs", cl::Hidden,
    cl::desc("Verify generated machine code"),
    cl::init(getenv("LLVM_VERIFY_MACHINEINSTRS")!=NULL));
static cl::opt<std::string>
PrintMachineInstrs("print-machineinstrs", cl::ValueOptional,
                   cl::desc("Print machine instrs"),
                   cl::value_desc("pass-name"), cl::init("option-unspecified"));

// Experimental option to run live inteerval analysis early.
static cl::opt<bool> EarlyLiveIntervals("early-live-intervals", cl::Hidden,
    cl::desc("Run live interval analysis earlier in the pipeline"));

/// Allow standard passes to be disabled by command line options. This supports
/// simple binary flags that either suppress the pass or do nothing.
/// i.e. -disable-mypass=false has no effect.
/// These should be converted to boolOrDefault in order to use applyOverride.
static AnalysisID applyDisable(AnalysisID PassID, bool Override) {
  if (Override)
    return 0;
  return PassID;
}

/// Allow Pass selection to be overriden by command line options. This supports
/// flags with ternary conditions. TargetID is passed through by default. The
/// pass is suppressed when the option is false. When the option is true, the
/// StandardID is selected if the target provides no default.
static AnalysisID applyOverride(AnalysisID TargetID, cl::boolOrDefault Override,
                                AnalysisID StandardID) {
  switch (Override) {
  case cl::BOU_UNSET:
    return TargetID;
  case cl::BOU_TRUE:
    if (TargetID)
      return TargetID;
    if (StandardID == 0)
      report_fatal_error("Target cannot enable pass");
    return StandardID;
  case cl::BOU_FALSE:
    return 0;
  }
  llvm_unreachable("Invalid command line option state");
}

/// Allow standard passes to be disabled by the command line, regardless of who
/// is adding the pass.
///
/// StandardID is the pass identified in the standard pass pipeline and provided
/// to addPass(). It may be a target-specific ID in the case that the target
/// directly adds its own pass, but in that case we harmlessly fall through.
///
/// TargetID is the pass that the target has configured to override StandardID.
///
/// StandardID may be a pseudo ID. In that case TargetID is the name of the real
/// pass to run. This allows multiple options to control a single pass depending
/// on where in the pipeline that pass is added.
static AnalysisID overridePass(AnalysisID StandardID, AnalysisID TargetID) {
  if (StandardID == &PostRASchedulerID)
    return applyDisable(TargetID, DisablePostRA);

  if (StandardID == &BranchFolderPassID)
    return applyDisable(TargetID, DisableBranchFold);

  if (StandardID == &TailDuplicateID)
    return applyDisable(TargetID, DisableTailDuplicate);

  if (StandardID == &TargetPassConfig::EarlyTailDuplicateID)
    return applyDisable(TargetID, DisableEarlyTailDup);

  if (StandardID == &MachineBlockPlacementID)
    return applyDisable(TargetID, DisableCodePlace);

  if (StandardID == &CodePlacementOptID)
    return applyDisable(TargetID, DisableCodePlace);

  if (StandardID == &StackSlotColoringID)
    return applyDisable(TargetID, DisableSSC);

  if (StandardID == &DeadMachineInstructionElimID)
    return applyDisable(TargetID, DisableMachineDCE);

  if (StandardID == &EarlyIfConverterID)
    return applyDisable(TargetID, DisableEarlyIfConversion);

  if (StandardID == &MachineLICMID)
    return applyDisable(TargetID, DisableMachineLICM);

  if (StandardID == &MachineCSEID)
    return applyDisable(TargetID, DisableMachineCSE);

  if (StandardID == &MachineSchedulerID)
    return applyOverride(TargetID, EnableMachineSched, StandardID);

  if (StandardID == &TargetPassConfig::PostRAMachineLICMID)
    return applyDisable(TargetID, DisablePostRAMachineLICM);

  if (StandardID == &MachineSinkingID)
    return applyDisable(TargetID, DisableMachineSink);

  if (StandardID == &MachineCopyPropagationID)
    return applyDisable(TargetID, DisableCopyProp);

  return TargetID;
}

//===---------------------------------------------------------------------===//
/// TargetPassConfig
//===---------------------------------------------------------------------===//

INITIALIZE_PASS(TargetPassConfig, "targetpassconfig",
                "Target Pass Configuration", false, false)
char TargetPassConfig::ID = 0;

// Pseudo Pass IDs.
char TargetPassConfig::EarlyTailDuplicateID = 0;
char TargetPassConfig::PostRAMachineLICMID = 0;

namespace llvm {
class PassConfigImpl {
public:
  // List of passes explicitly substituted by this target. Normally this is
  // empty, but it is a convenient way to suppress or replace specific passes
  // that are part of a standard pass pipeline without overridding the entire
  // pipeline. This mechanism allows target options to inherit a standard pass's
  // user interface. For example, a target may disable a standard pass by
  // default by substituting a pass ID of zero, and the user may still enable
  // that standard pass with an explicit command line option.
  DenseMap<AnalysisID,AnalysisID> TargetPasses;

  /// Store the pairs of <AnalysisID, AnalysisID> of which the second pass
  /// is inserted after each instance of the first one.
  SmallVector<std::pair<AnalysisID, AnalysisID>, 4> InsertedPasses;
};
} // namespace llvm

// Out of line virtual method.
TargetPassConfig::~TargetPassConfig() {
  delete Impl;
}

// Out of line constructor provides default values for pass options and
// registers all common codegen passes.
TargetPassConfig::TargetPassConfig(TargetMachine *tm, PassManagerBase &pm)
  : ImmutablePass(ID), PM(&pm), StartAfter(0), StopAfter(0),
    Started(true), Stopped(false), TM(tm), Impl(0), Initialized(false),
    DisableVerify(false),
    EnableTailMerge(true) {

  Impl = new PassConfigImpl();

  // Register all target independent codegen passes to activate their PassIDs,
  // including this pass itself.
  initializeCodeGen(*PassRegistry::getPassRegistry());

  // Substitute Pseudo Pass IDs for real ones.
  substitutePass(&EarlyTailDuplicateID, &TailDuplicateID);
  substitutePass(&PostRAMachineLICMID, &MachineLICMID);

  // Disable early if-conversion. Targets that are ready can enable it.
  disablePass(&EarlyIfConverterID);

  // Temporarily disable experimental passes.
  const TargetSubtargetInfo &ST = TM->getSubtarget<TargetSubtargetInfo>();
  if (!ST.enableMachineScheduler())
    disablePass(&MachineSchedulerID);
}

/// Insert InsertedPassID pass after TargetPassID.
void TargetPassConfig::insertPass(AnalysisID TargetPassID,
                                  AnalysisID InsertedPassID) {
  assert(TargetPassID != InsertedPassID && "Insert a pass after itself!");
  std::pair<AnalysisID, AnalysisID> P(TargetPassID, InsertedPassID);
  Impl->InsertedPasses.push_back(P);
}

/// createPassConfig - Create a pass configuration object to be used by
/// addPassToEmitX methods for generating a pipeline of CodeGen passes.
///
/// Targets may override this to extend TargetPassConfig.
TargetPassConfig *LLVMTargetMachine::createPassConfig(PassManagerBase &PM) {
  return new TargetPassConfig(this, PM);
}

TargetPassConfig::TargetPassConfig()
  : ImmutablePass(ID), PM(0) {
  llvm_unreachable("TargetPassConfig should not be constructed on-the-fly");
}

// Helper to verify the analysis is really immutable.
void TargetPassConfig::setOpt(bool &Opt, bool Val) {
  assert(!Initialized && "PassConfig is immutable");
  Opt = Val;
}

void TargetPassConfig::substitutePass(AnalysisID StandardID,
                                      AnalysisID TargetID) {
  Impl->TargetPasses[StandardID] = TargetID;
}

AnalysisID TargetPassConfig::getPassSubstitution(AnalysisID ID) const {
  DenseMap<AnalysisID, AnalysisID>::const_iterator
    I = Impl->TargetPasses.find(ID);
  if (I == Impl->TargetPasses.end())
    return ID;
  return I->second;
}

/// Add a pass to the PassManager if that pass is supposed to be run.  If the
/// Started/Stopped flags indicate either that the compilation should start at
/// a later pass or that it should stop after an earlier pass, then do not add
/// the pass.  Finally, compare the current pass against the StartAfter
/// and StopAfter options and change the Started/Stopped flags accordingly.
void TargetPassConfig::addPass(Pass *P) {
  assert(!Initialized && "PassConfig is immutable");

  // Cache the Pass ID here in case the pass manager finds this pass is
  // redundant with ones already scheduled / available, and deletes it.
  // Fundamentally, once we add the pass to the manager, we no longer own it
  // and shouldn't reference it.
  AnalysisID PassID = P->getPassID();

  if (Started && !Stopped)
    PM->add(P);
  if (StopAfter == PassID)
    Stopped = true;
  if (StartAfter == PassID)
    Started = true;
  if (Stopped && !Started)
    report_fatal_error("Cannot stop compilation after pass that is not run");
}

/// Add a CodeGen pass at this point in the pipeline after checking for target
/// and command line overrides.
AnalysisID TargetPassConfig::addPass(AnalysisID PassID) {
  AnalysisID TargetID = getPassSubstitution(PassID);
  AnalysisID FinalID = overridePass(PassID, TargetID);
  if (FinalID == 0)
    return FinalID;

  Pass *P = Pass::createPass(FinalID);
  if (!P)
    llvm_unreachable("Pass ID not registered");
  addPass(P);
  // Add the passes after the pass P if there is any.
  for (SmallVector<std::pair<AnalysisID, AnalysisID>, 4>::iterator
         I = Impl->InsertedPasses.begin(), E = Impl->InsertedPasses.end();
       I != E; ++I) {
    if ((*I).first == PassID) {
      assert((*I).second && "Illegal Pass ID!");
      Pass *NP = Pass::createPass((*I).second);
      assert(NP && "Pass ID not registered");
      addPass(NP);
    }
  }
  return FinalID;
}

void TargetPassConfig::printAndVerify(const char *Banner) {
  if (TM->shouldPrintMachineCode())
    addPass(createMachineFunctionPrinterPass(dbgs(), Banner));

  if (VerifyMachineCode)
    addPass(createMachineVerifierPass(Banner));
}

/// Add common target configurable passes that perform LLVM IR to IR transforms
/// following machine independent optimization.
void TargetPassConfig::addIRPasses() {
  // Basic AliasAnalysis support.
  // Add TypeBasedAliasAnalysis before BasicAliasAnalysis so that
  // BasicAliasAnalysis wins if they disagree. This is intended to help
  // support "obvious" type-punning idioms.
  addPass(createTypeBasedAliasAnalysisPass());
  addPass(createBasicAliasAnalysisPass());

  // Before running any passes, run the verifier to determine if the input
  // coming from the front-end and/or optimizer is valid.
  if (!DisableVerify)
    addPass(createVerifierPass());

  // Run loop strength reduction before anything else.
  if (getOptLevel() != CodeGenOpt::None && !DisableLSR) {
    addPass(createLoopStrengthReducePass(getTargetLowering()));
    if (PrintLSR)
      addPass(createPrintFunctionPass("\n\n*** Code after LSR ***\n", &dbgs()));
  }

  addPass(createGCLoweringPass());

  // Make sure that no unreachable blocks are instruction selected.
  addPass(createUnreachableBlockEliminationPass());
}

/// Turn exception handling constructs into something the code generators can
/// handle.
void TargetPassConfig::addPassesToHandleExceptions() {
  switch (TM->getMCAsmInfo()->getExceptionHandlingType()) {
  case ExceptionHandling::SjLj:
    // SjLj piggy-backs on dwarf for this bit. The cleanups done apply to both
    // Dwarf EH prepare needs to be run after SjLj prepare. Otherwise,
    // catch info can get misplaced when a selector ends up more than one block
    // removed from the parent invoke(s). This could happen when a landing
    // pad is shared by multiple invokes and is also a target of a normal
    // edge from elsewhere.
    addPass(createSjLjEHPreparePass(TM->getTargetLowering()));
    // FALLTHROUGH
  case ExceptionHandling::DwarfCFI:
  case ExceptionHandling::ARM:
  case ExceptionHandling::Win64:
    addPass(createDwarfEHPass(TM));
    break;
  case ExceptionHandling::None:
    addPass(createLowerInvokePass(TM->getTargetLowering()));

    // The lower invoke pass may create unreachable code. Remove it.
    addPass(createUnreachableBlockEliminationPass());
    break;
  }
}

/// Add pass to prepare the LLVM IR for code generation. This should be done
/// before exception handling preparation passes.
void TargetPassConfig::addCodeGenPrepare() {
  if (getOptLevel() != CodeGenOpt::None && !DisableCGP)
    addPass(createCodeGenPreparePass(getTargetLowering()));
}

/// Add common passes that perform LLVM IR to IR transforms in preparation for
/// instruction selection.
void TargetPassConfig::addISelPrepare() {
  addPass(createStackProtectorPass(getTargetLowering()));

  addPreISel();

  if (PrintISelInput)
    addPass(createPrintFunctionPass("\n\n"
                                    "*** Final LLVM Code input to ISel ***\n",
                                    &dbgs()));

  // All passes which modify the LLVM IR are now complete; run the verifier
  // to ensure that the IR is valid.
  if (!DisableVerify)
    addPass(createVerifierPass());
}

/// Add the complete set of target-independent postISel code generator passes.
///
/// This can be read as the standard order of major LLVM CodeGen stages. Stages
/// with nontrivial configuration or multiple passes are broken out below in
/// add%Stage routines.
///
/// Any TargetPassConfig::addXX routine may be overriden by the Target. The
/// addPre/Post methods with empty header implementations allow injecting
/// target-specific fixups just before or after major stages. Additionally,
/// targets have the flexibility to change pass order within a stage by
/// overriding default implementation of add%Stage routines below. Each
/// technique has maintainability tradeoffs because alternate pass orders are
/// not well supported. addPre/Post works better if the target pass is easily
/// tied to a common pass. But if it has subtle dependencies on multiple passes,
/// the target should override the stage instead.
///
/// TODO: We could use a single addPre/Post(ID) hook to allow pass injection
/// before/after any target-independent pass. But it's currently overkill.
void TargetPassConfig::addMachinePasses() {
  // Insert a machine instr printer pass after the specified pass.
  // If -print-machineinstrs specified, print machineinstrs after all passes.
  if (StringRef(PrintMachineInstrs.getValue()).equals(""))
    TM->Options.PrintMachineCode = true;
  else if (!StringRef(PrintMachineInstrs.getValue())
           .equals("option-unspecified")) {
    const PassRegistry *PR = PassRegistry::getPassRegistry();
    const PassInfo *TPI = PR->getPassInfo(PrintMachineInstrs.getValue());
    const PassInfo *IPI = PR->getPassInfo(StringRef("print-machineinstrs"));
    assert (TPI && IPI && "Pass ID not registered!");
    const char *TID = (const char *)(TPI->getTypeInfo());
    const char *IID = (const char *)(IPI->getTypeInfo());
    insertPass(TID, IID);
  }

  // Print the instruction selected machine code...
  printAndVerify("After Instruction Selection");

  // Expand pseudo-instructions emitted by ISel.
  if (addPass(&ExpandISelPseudosID))
    printAndVerify("After ExpandISelPseudos");

  // Add passes that optimize machine instructions in SSA form.
  if (getOptLevel() != CodeGenOpt::None) {
    addMachineSSAOptimization();
  } else {
    // If the target requests it, assign local variables to stack slots relative
    // to one another and simplify frame index references where possible.
    addPass(&LocalStackSlotAllocationID);
  }

  // Run pre-ra passes.
  if (addPreRegAlloc())
    printAndVerify("After PreRegAlloc passes");

  // Run register allocation and passes that are tightly coupled with it,
  // including phi elimination and scheduling.
  if (getOptimizeRegAlloc())
    addOptimizedRegAlloc(createRegAllocPass(true));
  else
    addFastRegAlloc(createRegAllocPass(false));

  // Run post-ra passes.
  if (addPostRegAlloc())
    printAndVerify("After PostRegAlloc passes");

  // Insert prolog/epilog code.  Eliminate abstract frame index references...
  addPass(&PrologEpilogCodeInserterID);
  printAndVerify("After PrologEpilogCodeInserter");

  /// Add passes that optimize machine instructions after register allocation.
  if (getOptLevel() != CodeGenOpt::None)
    addMachineLateOptimization();

  // Expand pseudo instructions before second scheduling pass.
  addPass(&ExpandPostRAPseudosID);
  printAndVerify("After ExpandPostRAPseudos");

  // Run pre-sched2 passes.
  if (addPreSched2())
    printAndVerify("After PreSched2 passes");

  // Second pass scheduler.
  if (getOptLevel() != CodeGenOpt::None) {
    addPass(&PostRASchedulerID);
    printAndVerify("After PostRAScheduler");
  }

  // GC
  addPass(&GCMachineCodeAnalysisID);
  if (PrintGCInfo)
    addPass(createGCInfoPrinter(dbgs()));

  // Basic block placement.
  if (getOptLevel() != CodeGenOpt::None)
    addBlockPlacement();

  if (addPreEmitPass())
    printAndVerify("After PreEmit passes");
}

/// Add passes that optimize machine instructions in SSA form.
void TargetPassConfig::addMachineSSAOptimization() {
  // Pre-ra tail duplication.
  if (addPass(&EarlyTailDuplicateID))
    printAndVerify("After Pre-RegAlloc TailDuplicate");

  // Optimize PHIs before DCE: removing dead PHI cycles may make more
  // instructions dead.
  addPass(&OptimizePHIsID);

  // This pass merges large allocas. StackSlotColoring is a different pass
  // which merges spill slots.
  addPass(&StackColoringID);

  // If the target requests it, assign local variables to stack slots relative
  // to one another and simplify frame index references where possible.
  addPass(&LocalStackSlotAllocationID);

  // With optimization, dead code should already be eliminated. However
  // there is one known exception: lowered code for arguments that are only
  // used by tail calls, where the tail calls reuse the incoming stack
  // arguments directly (see t11 in test/CodeGen/X86/sibcall.ll).
  addPass(&DeadMachineInstructionElimID);
  printAndVerify("After codegen DCE pass");

  addPass(&EarlyIfConverterID);
  addPass(&MachineLICMID);
  addPass(&MachineCSEID);
  addPass(&MachineSinkingID);
  printAndVerify("After Machine LICM, CSE and Sinking passes");

  addPass(&PeepholeOptimizerID);
  printAndVerify("After codegen peephole optimization pass");
}

//===---------------------------------------------------------------------===//
/// Register Allocation Pass Configuration
//===---------------------------------------------------------------------===//

bool TargetPassConfig::getOptimizeRegAlloc() const {
  switch (OptimizeRegAlloc) {
  case cl::BOU_UNSET: return getOptLevel() != CodeGenOpt::None;
  case cl::BOU_TRUE:  return true;
  case cl::BOU_FALSE: return false;
  }
  llvm_unreachable("Invalid optimize-regalloc state");
}

/// RegisterRegAlloc's global Registry tracks allocator registration.
MachinePassRegistry RegisterRegAlloc::Registry;

/// A dummy default pass factory indicates whether the register allocator is
/// overridden on the command line.
static FunctionPass *useDefaultRegisterAllocator() { return 0; }
static RegisterRegAlloc
defaultRegAlloc("default",
                "pick register allocator based on -O option",
                useDefaultRegisterAllocator);

/// -regalloc=... command line option.
static cl::opt<RegisterRegAlloc::FunctionPassCtor, false,
               RegisterPassParser<RegisterRegAlloc> >
RegAlloc("regalloc",
         cl::init(&useDefaultRegisterAllocator),
         cl::desc("Register allocator to use"));


/// Instantiate the default register allocator pass for this target for either
/// the optimized or unoptimized allocation path. This will be added to the pass
/// manager by addFastRegAlloc in the unoptimized case or addOptimizedRegAlloc
/// in the optimized case.
///
/// A target that uses the standard regalloc pass order for fast or optimized
/// allocation may still override this for per-target regalloc
/// selection. But -regalloc=... always takes precedence.
FunctionPass *TargetPassConfig::createTargetRegisterAllocator(bool Optimized) {
  if (Optimized)
    return createGreedyRegisterAllocator();
  else
    return createFastRegisterAllocator();
}

/// Find and instantiate the register allocation pass requested by this target
/// at the current optimization level.  Different register allocators are
/// defined as separate passes because they may require different analysis.
///
/// This helper ensures that the regalloc= option is always available,
/// even for targets that override the default allocator.
///
/// FIXME: When MachinePassRegistry register pass IDs instead of function ptrs,
/// this can be folded into addPass.
FunctionPass *TargetPassConfig::createRegAllocPass(bool Optimized) {
  RegisterRegAlloc::FunctionPassCtor Ctor = RegisterRegAlloc::getDefault();

  // Initialize the global default.
  if (!Ctor) {
    Ctor = RegAlloc;
    RegisterRegAlloc::setDefault(RegAlloc);
  }
  if (Ctor != useDefaultRegisterAllocator)
    return Ctor();

  // With no -regalloc= override, ask the target for a regalloc pass.
  return createTargetRegisterAllocator(Optimized);
}

/// Add the minimum set of target-independent passes that are required for
/// register allocation. No coalescing or scheduling.
void TargetPassConfig::addFastRegAlloc(FunctionPass *RegAllocPass) {
  addPass(&PHIEliminationID);
  addPass(&TwoAddressInstructionPassID);

  addPass(RegAllocPass);
  printAndVerify("After Register Allocation");
}

/// Add standard target-independent passes that are tightly coupled with
/// optimized register allocation, including coalescing, machine instruction
/// scheduling, and register allocation itself.
void TargetPassConfig::addOptimizedRegAlloc(FunctionPass *RegAllocPass) {
  addPass(&ProcessImplicitDefsID);

  // LiveVariables currently requires pure SSA form.
  //
  // FIXME: Once TwoAddressInstruction pass no longer uses kill flags,
  // LiveVariables can be removed completely, and LiveIntervals can be directly
  // computed. (We still either need to regenerate kill flags after regalloc, or
  // preferably fix the scavenger to not depend on them).
  addPass(&LiveVariablesID);

  // Add passes that move from transformed SSA into conventional SSA. This is a
  // "copy coalescing" problem.
  //
  if (!EnableStrongPHIElim) {
    // Edge splitting is smarter with machine loop info.
    addPass(&MachineLoopInfoID);
    addPass(&PHIEliminationID);
  }

  // Eventually, we want to run LiveIntervals before PHI elimination.
  if (EarlyLiveIntervals)
    addPass(&LiveIntervalsID);

  addPass(&TwoAddressInstructionPassID);

  if (EnableStrongPHIElim)
    addPass(&StrongPHIEliminationID);

  addPass(&RegisterCoalescerID);

  // PreRA instruction scheduling.
  if (addPass(&MachineSchedulerID))
    printAndVerify("After Machine Scheduling");

  // Add the selected register allocation pass.
  addPass(RegAllocPass);
  printAndVerify("After Register Allocation, before rewriter");

  // Allow targets to change the register assignments before rewriting.
  if (addPreRewrite())
    printAndVerify("After pre-rewrite passes");

  // Finally rewrite virtual registers.
  addPass(&VirtRegRewriterID);
  printAndVerify("After Virtual Register Rewriter");

  // FinalizeRegAlloc is convenient until MachineInstrBundles is more mature,
  // but eventually, all users of it should probably be moved to addPostRA and
  // it can go away.  Currently, it's the intended place for targets to run
  // FinalizeMachineBundles, because passes other than MachineScheduling an
  // RegAlloc itself may not be aware of bundles.
  if (addFinalizeRegAlloc())
    printAndVerify("After RegAlloc finalization");

  // Perform stack slot coloring and post-ra machine LICM.
  //
  // FIXME: Re-enable coloring with register when it's capable of adding
  // kill markers.
  addPass(&StackSlotColoringID);

  // Run post-ra machine LICM to hoist reloads / remats.
  //
  // FIXME: can this move into MachineLateOptimization?
  addPass(&PostRAMachineLICMID);

  printAndVerify("After StackSlotColoring and postra Machine LICM");
}

//===---------------------------------------------------------------------===//
/// Post RegAlloc Pass Configuration
//===---------------------------------------------------------------------===//

/// Add passes that optimize machine instructions after register allocation.
void TargetPassConfig::addMachineLateOptimization() {
  // Branch folding must be run after regalloc and prolog/epilog insertion.
  if (addPass(&BranchFolderPassID))
    printAndVerify("After BranchFolding");

  // Tail duplication.
  if (addPass(&TailDuplicateID))
    printAndVerify("After TailDuplicate");

  // Copy propagation.
  if (addPass(&MachineCopyPropagationID))
    printAndVerify("After copy propagation pass");
}

/// Add standard basic block placement passes.
void TargetPassConfig::addBlockPlacement() {
  AnalysisID PassID = 0;
  if (!DisableBlockPlacement) {
    // MachineBlockPlacement is a new pass which subsumes the functionality of
    // CodPlacementOpt. The old code placement pass can be restored by
    // disabling block placement, but eventually it will be removed.
    PassID = addPass(&MachineBlockPlacementID);
  } else {
    PassID = addPass(&CodePlacementOptID);
  }
  if (PassID) {
    // Run a separate pass to collect block placement statistics.
    if (EnableBlockPlacementStats)
      addPass(&MachineBlockPlacementStatsID);

    printAndVerify("After machine block placement.");
  }
}