Updating GettingStarted documentation to reference CMake as the preferred way to build LLVM.
Reviewers: chandlerc, samsonov, echristo
Reviewed By: samsonov
Subscribers: emaste, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D8046
llvm-svn: 232135
diff --git a/llvm/docs/BuildingLLVMWithAutotools.rst b/llvm/docs/BuildingLLVMWithAutotools.rst
new file mode 100644
index 0000000..9751950
--- /dev/null
+++ b/llvm/docs/BuildingLLVMWithAutotools.rst
@@ -0,0 +1,297 @@
+====================================
+Building LLVM With Autotools
+====================================
+
+.. contents::
+ :local:
+
+Overview
+========
+
+
+Local LLVM Configuration
+------------------------
+
+Once checked out from the Subversion repository, the LLVM suite source code must
+be configured via the ``configure`` script. This script sets variables in the
+various ``*.in`` files, most notably ``llvm/Makefile.config`` and
+``llvm/include/Config/config.h``. It also populates *OBJ_ROOT* with the
+Makefiles needed to begin building LLVM.
+
+The following environment variables are used by the ``configure`` script to
+configure the build system:
+
++------------+-----------------------------------------------------------+
+| Variable | Purpose |
++============+===========================================================+
+| CC | Tells ``configure`` which C compiler to use. By default, |
+| | ``configure`` will check ``PATH`` for ``clang`` and GCC C |
+| | compilers (in this order). Use this variable to override |
+| | ``configure``\'s default behavior. |
++------------+-----------------------------------------------------------+
+| CXX | Tells ``configure`` which C++ compiler to use. By |
+| | default, ``configure`` will check ``PATH`` for |
+| | ``clang++`` and GCC C++ compilers (in this order). Use |
+| | this variable to override ``configure``'s default |
+| | behavior. |
++------------+-----------------------------------------------------------+
+
+The following options can be used to set or enable LLVM specific options:
+
+``--enable-optimized``
+
+ Enables optimized compilation (debugging symbols are removed and GCC
+ optimization flags are enabled). Note that this is the default setting if you
+ are using the LLVM distribution. The default behavior of a Subversion
+ checkout is to use an unoptimized build (also known as a debug build).
+
+``--enable-debug-runtime``
+
+ Enables debug symbols in the runtime libraries. The default is to strip debug
+ symbols from the runtime libraries.
+
+``--enable-jit``
+
+ Compile the Just In Time (JIT) compiler functionality. This is not available
+ on all platforms. The default is dependent on platform, so it is best to
+ explicitly enable it if you want it.
+
+``--enable-targets=target-option``
+
+ Controls which targets will be built and linked into llc. The default value
+ for ``target_options`` is "all" which builds and links all available targets.
+ The "host" target is selected as the target of the build host. You can also
+ specify a comma separated list of target names that you want available in llc.
+ The target names use all lower case. The current set of targets is:
+
+ ``aarch64, arm, arm64, cpp, hexagon, mips, mipsel, mips64, mips64el, msp430,
+ powerpc, nvptx, r600, sparc, systemz, x86, x86_64, xcore``.
+
+``--enable-doxygen``
+
+ Look for the doxygen program and enable construction of doxygen based
+ documentation from the source code. This is disabled by default because
+ generating the documentation can take a long time and producess 100s of
+ megabytes of output.
+
+To configure LLVM, follow these steps:
+
+#. Change directory into the object root directory:
+
+ .. code-block:: console
+
+ % cd OBJ_ROOT
+
+#. Run the ``configure`` script located in the LLVM source tree:
+
+ .. code-block:: console
+
+ % SRC_ROOT/configure --prefix=/install/path [other options]
+
+Compiling the LLVM Suite Source Code
+------------------------------------
+
+Once you have configured LLVM, you can build it. There are three types of
+builds:
+
+Debug Builds
+
+ These builds are the default when one is using a Subversion checkout and
+ types ``gmake`` (unless the ``--enable-optimized`` option was used during
+ configuration). The build system will compile the tools and libraries with
+ debugging information. To get a Debug Build using the LLVM distribution the
+ ``--disable-optimized`` option must be passed to ``configure``.
+
+Release (Optimized) Builds
+
+ These builds are enabled with the ``--enable-optimized`` option to
+ ``configure`` or by specifying ``ENABLE_OPTIMIZED=1`` on the ``gmake`` command
+ line. For these builds, the build system will compile the tools and libraries
+ with GCC optimizations enabled and strip debugging information from the
+ libraries and executables it generates. Note that Release Builds are default
+ when using an LLVM distribution.
+
+Profile Builds
+
+ These builds are for use with profiling. They compile profiling information
+ into the code for use with programs like ``gprof``. Profile builds must be
+ started by specifying ``ENABLE_PROFILING=1`` on the ``gmake`` command line.
+
+Once you have LLVM configured, you can build it by entering the *OBJ_ROOT*
+directory and issuing the following command:
+
+.. code-block:: console
+
+ % gmake
+
+If the build fails, please `check here <GettingStarted.html#check-here>`_
+to see if you are using a version of GCC that is known not to compile LLVM.
+
+If you have multiple processors in your machine, you may wish to use some of the
+parallel build options provided by GNU Make. For example, you could use the
+command:
+
+.. code-block:: console
+
+ % gmake -j2
+
+There are several special targets which are useful when working with the LLVM
+source code:
+
+``gmake clean``
+
+ Removes all files generated by the build. This includes object files,
+ generated C/C++ files, libraries, and executables.
+
+``gmake dist-clean``
+
+ Removes everything that ``gmake clean`` does, but also removes files generated
+ by ``configure``. It attempts to return the source tree to the original state
+ in which it was shipped.
+
+``gmake install``
+
+ Installs LLVM header files, libraries, tools, and documentation in a hierarchy
+ under ``$PREFIX``, specified with ``./configure --prefix=[dir]``, which
+ defaults to ``/usr/local``.
+
+``gmake -C runtime install-bytecode``
+
+ Assuming you built LLVM into $OBJDIR, when this command is run, it will
+ install bitcode libraries into the GCC front end's bitcode library directory.
+ If you need to update your bitcode libraries, this is the target to use once
+ you've built them.
+
+Please see the `Makefile Guide <MakefileGuide.html>`_ for further details on
+these ``make`` targets and descriptions of other targets available.
+
+It is also possible to override default values from ``configure`` by declaring
+variables on the command line. The following are some examples:
+
+``gmake ENABLE_OPTIMIZED=1``
+
+ Perform a Release (Optimized) build.
+
+``gmake ENABLE_OPTIMIZED=1 DISABLE_ASSERTIONS=1``
+
+ Perform a Release (Optimized) build without assertions enabled.
+
+``gmake ENABLE_OPTIMIZED=0``
+
+ Perform a Debug build.
+
+``gmake ENABLE_PROFILING=1``
+
+ Perform a Profiling build.
+
+``gmake VERBOSE=1``
+
+ Print what ``gmake`` is doing on standard output.
+
+``gmake TOOL_VERBOSE=1``
+
+ Ask each tool invoked by the makefiles to print out what it is doing on
+ the standard output. This also implies ``VERBOSE=1``.
+
+Every directory in the LLVM object tree includes a ``Makefile`` to build it and
+any subdirectories that it contains. Entering any directory inside the LLVM
+object tree and typing ``gmake`` should rebuild anything in or below that
+directory that is out of date.
+
+This does not apply to building the documentation.
+LLVM's (non-Doxygen) documentation is produced with the
+`Sphinx <http://sphinx-doc.org/>`_ documentation generation system.
+There are some HTML documents that have not yet been converted to the new
+system (which uses the easy-to-read and easy-to-write
+`reStructuredText <http://sphinx-doc.org/rest.html>`_ plaintext markup
+language).
+The generated documentation is built in the ``SRC_ROOT/docs`` directory using
+a special makefile.
+For instructions on how to install Sphinx, see
+`Sphinx Introduction for LLVM Developers
+<http://lld.llvm.org/sphinx_intro.html>`_.
+After following the instructions there for installing Sphinx, build the LLVM
+HTML documentation by doing the following:
+
+.. code-block:: console
+
+ $ cd SRC_ROOT/docs
+ $ make -f Makefile.sphinx
+
+This creates a ``_build/html`` sub-directory with all of the HTML files, not
+just the generated ones.
+This directory corresponds to ``llvm.org/docs``.
+For example, ``_build/html/SphinxQuickstartTemplate.html`` corresponds to
+``llvm.org/docs/SphinxQuickstartTemplate.html``.
+The :doc:`SphinxQuickstartTemplate` is useful when creating a new document.
+
+Cross-Compiling LLVM
+--------------------
+
+It is possible to cross-compile LLVM itself. That is, you can create LLVM
+executables and libraries to be hosted on a platform different from the platform
+where they are built (a Canadian Cross build). To configure a cross-compile,
+supply the configure script with ``--build`` and ``--host`` options that are
+different. The values of these options must be legal target triples that your
+GCC compiler supports.
+
+The result of such a build is executables that are not runnable on on the build
+host (--build option) but can be executed on the compile host (--host option).
+
+Check :doc:`HowToCrossCompileLLVM` and `Clang docs on how to cross-compile in general
+<http://clang.llvm.org/docs/CrossCompilation.html>`_ for more information
+about cross-compiling.
+
+The Location of LLVM Object Files
+---------------------------------
+
+The LLVM build system is capable of sharing a single LLVM source tree among
+several LLVM builds. Hence, it is possible to build LLVM for several different
+platforms or configurations using the same source tree.
+
+This is accomplished in the typical autoconf manner:
+
+* Change directory to where the LLVM object files should live:
+
+ .. code-block:: console
+
+ % cd OBJ_ROOT
+
+* Run the ``configure`` script found in the LLVM source directory:
+
+ .. code-block:: console
+
+ % SRC_ROOT/configure
+
+The LLVM build will place files underneath *OBJ_ROOT* in directories named after
+the build type:
+
+Debug Builds with assertions enabled (the default)
+
+ Tools
+
+ ``OBJ_ROOT/Debug+Asserts/bin``
+
+ Libraries
+
+ ``OBJ_ROOT/Debug+Asserts/lib``
+
+Release Builds
+
+ Tools
+
+ ``OBJ_ROOT/Release/bin``
+
+ Libraries
+
+ ``OBJ_ROOT/Release/lib``
+
+Profile Builds
+
+ Tools
+
+ ``OBJ_ROOT/Profile/bin``
+
+ Libraries
+
+ ``OBJ_ROOT/Profile/lib``