diff --git a/llvm/docs/CommandGuide/llvm-objdump.rst b/llvm/docs/CommandGuide/llvm-objdump.rst
index c3e7c16..24bfe9e 100644
--- a/llvm/docs/CommandGuide/llvm-objdump.rst
+++ b/llvm/docs/CommandGuide/llvm-objdump.rst
@@ -19,86 +19,179 @@
 At least one of the following commands are required, and some commands can be
 combined with other commands:
 
-.. option:: -d, -disassemble
+.. option:: -a, --archive-headers
+
+  Display the information contained within an archive's headers.
+
+.. option:: -d, --disassemble
 
   Display assembler mnemonics for the machine instructions. Disassembles all
-  text sections found in the input file(s).
+  text sections found in the input file(s) by default.
 
-.. option:: -D, -disassemble-all
+.. option:: -D, --disassemble-all
 
   Display assembler mnemonics for the machine instructions. Disassembles all
-  sections found in the input file(s).
+  sections found in the input file(s) by default.
+  
+.. option:: --disassemble-functions=<func1[,func2,...]>
 
-.. option:: -help
+  Disassemble only the specified symbols. Implies :option:`--disassemble`.
 
-  Display usage information and exit. Does not stack with other commands.
+.. option:: --dwarf=<value>
 
-.. option:: -r
+  Dump the specified DWARF debug sections. The supported values are:
 
-  Display the relocation entries in the file.
+  `frames` - .debug_frame
 
-.. option:: -s
+.. option:: -f, --file-headers
 
-  Display the content of each section.
+  Display the contents of the overall file header.
 
-.. option:: -section-headers
+.. option:: --fault-map-section
+
+  Display the content of the fault map section.
+
+.. option:: -h, --headers, --section-headers
 
   Display summaries of the headers for each section.
 
-.. option:: -t
+.. option:: --help
+
+  Display usage information and exit. Does not stack with other commands.
+
+.. option:: -p, --private-headers
+
+  Display format-specific file headers.
+
+.. option:: -r, --reloc
+
+  Display the relocation entries in the file.
+
+.. option:: -R, --dynamic-reloc
+
+  Display the dynamic relocation entries in the file.
+
+.. option:: --raw-clang-ast
+
+  Dump the raw binary contents of the clang AST section.
+
+.. option:: -s, --full-contents
+
+  Display the contents of each section.
+
+.. option:: -t, --syms
 
   Display the symbol table.
 
-.. option:: -version
+.. option:: -u, --unwind-info
+
+  Display the unwind info of the input(s).
+
+.. option:: --version
 
   Display the version of this program. Does not stack with other commands.
 
+.. option:: -x, --all-headers
+
+  Display all available header information. Equivalent to specifying
+  :option:`--archive-headers`, :option:`--file-headers`,
+  :option:`--private-headers`, :option:`--reloc`, :option:`--section-headers`,
+  and :option:`--syms`.
+
 OPTIONS
 -------
 :program:`llvm-objdump` supports the following options:
 
-.. option:: -arch=<architecture>
+.. option:: --adjust-vma=<offset>
 
-  Specify the architecture to disassemble. see ``-version`` for available
-  architectures.
+  Increase the displayed address in disassembly or section header printing by
+  the specified offset.
 
-.. option:: -cfg
+.. option:: --arch-name=<string>
 
-  Create a CFG for every symbol in the object file and write it to a graphviz
-  file (Mach-O-only).
+  Specify the target architecture when disassembling. Use :option:``--version``
+  for a list of available targets.
 
-.. option:: -dsym=<string>
+.. option:: -C, --demangle
 
-  Use .dSYM file for debug info.
+  Demangle symbol names in the output.
 
-.. option:: -g
+.. option:: -j, --section=<section1[,section2,...]>
 
-  Print line information from debug info if available.
+  Perform the specified command(s) on the specified section(s) only. For Mach-O
+  use `segment,section` to specify the section name.
 
-.. option:: -m, -macho
+.. option:: -l, --line-numbers
 
-  Use Mach-O specific object file parser. Commands and other options may behave
-  differently when used with ``-macho``.
+  When disassembling, display source line numbers with disassembly. Implies
+  :option:`--disassemble`.
 
-.. option:: -mattr=<a1,+a2,-a3,...>
+.. option:: -M, --disassembler-options=<opt1[,opt2,...]>
 
-  Target specific attributes.
+  Pass target-specific disassembler options. Currently supported for ARM targets
+  only. Available options are ``reg-names-std`` and ``reg-names-raw``.
 
-.. option:: -mc-x86-disable-arith-relaxation
+.. option:: --mcpu=<cpu-name>
 
-  Disable relaxation of arithmetic instruction for X86.
+  Target a specific CPU type for disassembly. Specify ``--mcpu=help`` to display
+  available CPUs.
 
-.. option:: -stats
+.. option:: --mattr=<a1,+a2,-a3,...>
 
-  Enable statistics output from program.
+  Enable/disable target-specific attributes. Specify ``--mcpu=help`` to display
+  the available attributes.
 
-.. option:: -triple=<string>
+.. option:: --no-leading-addr
 
-  Target triple to disassemble for, see ``-version`` for available targets.
+  When disassembling, do not print the leading address in the disassembly
+  output.
 
-.. option:: -x86-asm-syntax=<style>
+.. option:: --no-show-raw-insn
 
-  When used with the ``-disassemble`` option, choose style of code to emit from
+  When disassembling instructions, do not print the raw bytes of the
+  instruction.
+
+.. option:: --print-imm-hex
+
+  Use hex format when printing immediate values in disassembly output.
+
+.. option:: -S, --source
+
+  When disassembling, display source inlined with the disassembly.
+  Implies :option:`--disassemble`.
+
+.. option:: --show-lma
+
+  Display the LMA column when dumping ELF section headers. Defaults to off
+  unless any section has different VMA and LMAs.
+
+.. option:: --start-address=<address>
+
+  When disassembling, only disassemble from the specified address.
+
+  When printing relocations, only print the relocations patching offsets from at least ``address``.
+
+  When printing symbols, only print symbols with a value of at least ``address``.
+
+.. option:: --stop-address=<address>
+
+  When disassembling, only disassemble up to, but not including the specified address.
+
+  When printing relocations, only print the relocations patching offsets up to ``address``.
+
+  When printing symbols, only print symbols with a value up to ``address``.
+
+.. option:: --triple=<string>
+
+  Target triple to disassemble for, see ``--version`` for available targets.
+
+.. option:: -w, --wide
+
+  Ignored for compatibility with GNU objdump.
+
+.. option:: --x86-asm-syntax=<style>
+
+  When used with the ``--disassemble`` option, choose style of code to emit from
   X86 backend. Supported values are:
 
    .. option:: att
@@ -112,6 +205,117 @@
 
   The default disassembly style is **att**.
 
+.. option:: -z, --disassemble-zeroes
+
+  Do not skip blocks of zeroes when disassembling.
+
+MACH-O ONLY OPTIONS AND COMMANDS
+--------------------------------
+
+.. option:: --arch=<architecture>
+
+  Specify the architecture to disassemble. see ``--version`` for available
+  architectures.
+
+.. option:: --archive-member-offsets
+
+  Print the offset to each archive member for Mach-O archives (requires
+  :option:`--archive-headers`).
+
+.. option:: --bind
+
+  Display binding info
+
+.. option:: --cfg
+
+  Create a CFG for every symbol in the object file and write it to a graphviz
+  file.
+
+.. option:: --data-in-code
+
+  Display the data in code table.
+
+.. option:: --dis-symname=<name>
+
+  Disassemble just the specified symbol's instructions.
+
+.. option:: --dylibs-used
+
+  Display the shared libraries used for linked files.
+
+.. option:: --dsym=<string>
+
+  Use .dSYM file for debug info.
+
+.. option:: --dylib-id
+
+  Display the shared library's ID for dylib files.
+
+.. option:: --exports-trie
+
+  Display exported symbols.
+
+.. option:: -g
+
+  Print line information from debug info if available.
+
+.. option:: --full-leading-addr
+
+  Print the full leading address when disassembling.
+
+.. option:: --indirect-symbols
+
+  Display the indirect symbol table.
+
+.. option:: --info-plist
+
+  Display the info plist section as strings.
+
+.. option:: --lazy-bind
+
+  Display lazy binding info.
+
+.. option:: --link-opt-hints
+
+  Display the linker optimization hints.
+
+.. option:: -m, --macho
+
+  Use Mach-O specific object file parser. Commands and other options may behave
+  differently when used with ``--macho``.
+
+.. option:: --no-leading-headers
+
+  Do not print any leading headers.
+
+.. option:: --no-symbolic-operands
+
+  Do not print symbolic operands when disassembling.
+
+.. option:: --non-verbose
+
+  Display the information for Mach-O objects in non-verbose or numeric form.
+
+.. option:: --objc-meta-data
+
+  Display the Objective-C runtime meta data.
+
+.. option:: --private-header
+
+  Display only the first format specific file header.
+
+.. option:: --rebase
+
+  Display rebasing information.
+
+.. option:: --universal-headers
+
+  Display universal headers.
+
+.. option:: --weak-bind
+
+  Display weak binding information.
+
 BUGS
 ----
 
@@ -120,4 +324,4 @@
 SEE ALSO
 --------
 
-:manpage:`llvm-nm(1)`
+:manpage:`llvm-nm(1)`, :manpage:`llvm-readobj(1)`