Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
This update was done with the following bash script:
find test/CodeGen -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc.*debug" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP
done
sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP
sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP
sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP
sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP
mv $TEMP $NAME
fi
done
llvm-svn: 186280
diff --git a/llvm/test/CodeGen/SystemZ/int-cmp-15.ll b/llvm/test/CodeGen/SystemZ/int-cmp-15.ll
index 1868c57..48a068e 100644
--- a/llvm/test/CodeGen/SystemZ/int-cmp-15.ll
+++ b/llvm/test/CodeGen/SystemZ/int-cmp-15.ll
@@ -4,7 +4,7 @@
; Check ordered comparisons near the low end of the unsigned 8-bit range.
define double @f1(double %a, double %b, i8 *%ptr) {
-; CHECK: f1:
+; CHECK-LABEL: f1:
; CHECK: cli 0(%r2), 1
; CHECK-NEXT: jh
; CHECK: br %r14
@@ -16,7 +16,7 @@
; Check ordered comparisons near the high end of the unsigned 8-bit range.
define double @f2(double %a, double %b, i8 *%ptr) {
-; CHECK: f2:
+; CHECK-LABEL: f2:
; CHECK: cli 0(%r2), 254
; CHECK-NEXT: jl
; CHECK: br %r14
@@ -28,7 +28,7 @@
; Check tests for negative bytes.
define double @f3(double %a, double %b, i8 *%ptr) {
-; CHECK: f3:
+; CHECK-LABEL: f3:
; CHECK: cli 0(%r2), 127
; CHECK-NEXT: jh
; CHECK: br %r14
@@ -40,7 +40,7 @@
; ...and an alternative form.
define double @f4(double %a, double %b, i8 *%ptr) {
-; CHECK: f4:
+; CHECK-LABEL: f4:
; CHECK: cli 0(%r2), 127
; CHECK-NEXT: jh
; CHECK: br %r14
@@ -52,7 +52,7 @@
; Check tests for non-negative bytes.
define double @f5(double %a, double %b, i8 *%ptr) {
-; CHECK: f5:
+; CHECK-LABEL: f5:
; CHECK: cli 0(%r2), 128
; CHECK-NEXT: jl
; CHECK: br %r14
@@ -64,7 +64,7 @@
; ...and an alternative form.
define double @f6(double %a, double %b, i8 *%ptr) {
-; CHECK: f6:
+; CHECK-LABEL: f6:
; CHECK: cli 0(%r2), 128
; CHECK-NEXT: jl
; CHECK: br %r14
@@ -76,7 +76,7 @@
; Check equality comparisons at the low end of the signed 8-bit range.
define double @f7(double %a, double %b, i8 *%ptr) {
-; CHECK: f7:
+; CHECK-LABEL: f7:
; CHECK: cli 0(%r2), 128
; CHECK-NEXT: je
; CHECK: br %r14
@@ -88,7 +88,7 @@
; Check equality comparisons at the low end of the unsigned 8-bit range.
define double @f8(double %a, double %b, i8 *%ptr) {
-; CHECK: f8:
+; CHECK-LABEL: f8:
; CHECK: cli 0(%r2), 0
; CHECK-NEXT: je
; CHECK: br %r14
@@ -100,7 +100,7 @@
; Check equality comparisons at the high end of the signed 8-bit range.
define double @f9(double %a, double %b, i8 *%ptr) {
-; CHECK: f9:
+; CHECK-LABEL: f9:
; CHECK: cli 0(%r2), 127
; CHECK-NEXT: je
; CHECK: br %r14
@@ -112,7 +112,7 @@
; Check equality comparisons at the high end of the unsigned 8-bit range.
define double @f10(double %a, double %b, i8 *%ptr) {
-; CHECK: f10:
+; CHECK-LABEL: f10:
; CHECK: cli 0(%r2), 255
; CHECK-NEXT: je
; CHECK: br %r14
@@ -124,7 +124,7 @@
; Check the high end of the CLI range.
define double @f11(double %a, double %b, i8 *%src) {
-; CHECK: f11:
+; CHECK-LABEL: f11:
; CHECK: cli 4095(%r2), 127
; CHECK: br %r14
%ptr = getelementptr i8 *%src, i64 4095
@@ -136,7 +136,7 @@
; Check the next byte up, which should use CLIY instead of CLI.
define double @f12(double %a, double %b, i8 *%src) {
-; CHECK: f12:
+; CHECK-LABEL: f12:
; CHECK: cliy 4096(%r2), 127
; CHECK: br %r14
%ptr = getelementptr i8 *%src, i64 4096
@@ -148,7 +148,7 @@
; Check the high end of the CLIY range.
define double @f13(double %a, double %b, i8 *%src) {
-; CHECK: f13:
+; CHECK-LABEL: f13:
; CHECK: cliy 524287(%r2), 127
; CHECK: br %r14
%ptr = getelementptr i8 *%src, i64 524287
@@ -161,7 +161,7 @@
; Check the next byte up, which needs separate address logic.
; Other sequences besides this one would be OK.
define double @f14(double %a, double %b, i8 *%src) {
-; CHECK: f14:
+; CHECK-LABEL: f14:
; CHECK: agfi %r2, 524288
; CHECK: cli 0(%r2), 127
; CHECK: br %r14
@@ -174,7 +174,7 @@
; Check the high end of the negative CLIY range.
define double @f15(double %a, double %b, i8 *%src) {
-; CHECK: f15:
+; CHECK-LABEL: f15:
; CHECK: cliy -1(%r2), 127
; CHECK: br %r14
%ptr = getelementptr i8 *%src, i64 -1
@@ -186,7 +186,7 @@
; Check the low end of the CLIY range.
define double @f16(double %a, double %b, i8 *%src) {
-; CHECK: f16:
+; CHECK-LABEL: f16:
; CHECK: cliy -524288(%r2), 127
; CHECK: br %r14
%ptr = getelementptr i8 *%src, i64 -524288
@@ -199,7 +199,7 @@
; Check the next byte down, which needs separate address logic.
; Other sequences besides this one would be OK.
define double @f17(double %a, double %b, i8 *%src) {
-; CHECK: f17:
+; CHECK-LABEL: f17:
; CHECK: agfi %r2, -524289
; CHECK: cli 0(%r2), 127
; CHECK: br %r14
@@ -212,7 +212,7 @@
; Check that CLI does not allow an index
define double @f18(double %a, double %b, i64 %base, i64 %index) {
-; CHECK: f18:
+; CHECK-LABEL: f18:
; CHECK: agr %r2, %r3
; CHECK: cli 4095(%r2), 127
; CHECK: br %r14
@@ -227,7 +227,7 @@
; Check that CLIY does not allow an index
define double @f19(double %a, double %b, i64 %base, i64 %index) {
-; CHECK: f19:
+; CHECK-LABEL: f19:
; CHECK: agr %r2, %r3
; CHECK: cliy 4096(%r2), 127
; CHECK: br %r14