Move REP out of the Prefix field of the X86 format. Give it its own bit. It had special handling anyway and this enables a future patch.
llvm-svn: 200520
diff --git a/llvm/lib/Target/X86/MCTargetDesc/X86BaseInfo.h b/llvm/lib/Target/X86/MCTargetDesc/X86BaseInfo.h
index c085f14..b690de2 100644
--- a/llvm/lib/Target/X86/MCTargetDesc/X86BaseInfo.h
+++ b/llvm/lib/Target/X86/MCTargetDesc/X86BaseInfo.h
@@ -324,9 +324,9 @@
//===------------------------------------------------------------------===//
// Op0Mask - There are several prefix bytes that are used to form two byte
- // opcodes. These are currently 0x0F, 0xF3, and 0xD8-0xDF. This mask is
- // used to obtain the setting of this field. If no bits in this field is
- // set, there is no prefix byte for obtaining a multibyte opcode.
+ // opcodes. This mask is used to obtain the setting of this field. If no
+ // bits in this field is set, there is no prefix byte for obtaining a
+ // multibyte opcode.
//
Op0Shift = 9,
Op0Mask = 0x1F << Op0Shift,
@@ -335,10 +335,6 @@
// starts with a 0x0F byte before the real opcode.
TB = 1 << Op0Shift,
- // REP - The 0xF3 prefix byte indicating repetition of the following
- // instruction.
- REP = 2 << Op0Shift,
-
// D8-DF - These escape opcodes are used by the floating point unit. These
// values must remain sequential.
D8 = 3 << Op0Shift, D9 = 4 << Op0Shift,
@@ -445,9 +441,13 @@
LOCKShift = FPTypeShift + 3,
LOCK = 1 << LOCKShift,
- // Execution domain for SSE instructions in bits 23, 24.
- // 0 in bits 23-24 means normal, non-SSE instruction.
- SSEDomainShift = LOCKShift + 1,
+ // REP prefix
+ REPShift = LOCKShift + 1,
+ REP = 1 << REPShift,
+
+ // Execution domain for SSE instructions.
+ // 0 means normal, non-SSE instruction.
+ SSEDomainShift = REPShift + 1,
OpcodeShift = SSEDomainShift + 2,
diff --git a/llvm/lib/Target/X86/MCTargetDesc/X86MCCodeEmitter.cpp b/llvm/lib/Target/X86/MCTargetDesc/X86MCCodeEmitter.cpp
index 7d81bbe..986e257 100644
--- a/llvm/lib/Target/X86/MCTargetDesc/X86MCCodeEmitter.cpp
+++ b/llvm/lib/Target/X86/MCTargetDesc/X86MCCodeEmitter.cpp
@@ -1156,7 +1156,6 @@
switch (TSFlags & X86II::Op0Mask) {
default: llvm_unreachable("Invalid prefix!");
case 0: break; // No prefix!
- case X86II::REP: break; // already handled.
case X86II::TB: // Two-byte opcode prefix
case X86II::T8: // 0F 38
case X86II::TA: // 0F 3A
@@ -1273,7 +1272,7 @@
MI, OS);
// Emit the repeat opcode prefix as needed.
- if ((TSFlags & X86II::Op0Mask) == X86II::REP)
+ if (TSFlags & X86II::REP)
EmitByte(0xF3, CurByte, OS);
// Emit the address size opcode prefix as needed.
diff --git a/llvm/lib/Target/X86/X86CodeEmitter.cpp b/llvm/lib/Target/X86/X86CodeEmitter.cpp
index b377419..dc75e60 100644
--- a/llvm/lib/Target/X86/X86CodeEmitter.cpp
+++ b/llvm/lib/Target/X86/X86CodeEmitter.cpp
@@ -667,7 +667,6 @@
case X86II::A7: // 0F A7
Need0FPrefix = true;
break;
- case X86II::REP: break; // already handled.
case X86II::PD: // 66 0F
case X86II::T8PD: // 66 0F 38
case X86II::TAPD: // 66 0F 3A
@@ -1125,7 +1124,7 @@
emitSegmentOverridePrefix(TSFlags, MemoryOperand, MI);
// Emit the repeat opcode prefix as needed.
- if ((Desc->TSFlags & X86II::Op0Mask) == X86II::REP)
+ if (Desc->TSFlags & X86II::REP)
MCE.emitByte(0xF3);
// Emit the address size opcode prefix as needed.
diff --git a/llvm/lib/Target/X86/X86InstrFormats.td b/llvm/lib/Target/X86/X86InstrFormats.td
index ded1d90..83cd7e1 100644
--- a/llvm/lib/Target/X86/X86InstrFormats.td
+++ b/llvm/lib/Target/X86/X86InstrFormats.td
@@ -119,8 +119,8 @@
class AdSize { bit hasAdSizePrefix = 1; }
class REX_W { bit hasREX_WPrefix = 1; }
class LOCK { bit hasLockPrefix = 1; }
+class REP { bit hasREPPrefix = 1; }
class TB { bits<5> Prefix = 1; }
-class REP { bits<5> Prefix = 2; }
class D8 { bits<5> Prefix = 3; }
class D9 { bits<5> Prefix = 4; }
class DA { bits<5> Prefix = 5; }
@@ -205,6 +205,7 @@
FPFormat FPForm = NotFP; // What flavor of FP instruction is this?
bit hasLockPrefix = 0; // Does this inst have a 0xF0 prefix?
Domain ExeDomain = d;
+ bit hasREPPrefix = 0; // Does this inst have a REP prefix?
bit hasVEXPrefix = 0; // Does this inst require a VEX prefix?
bit hasVEX_WPrefix = 0; // Does this inst set the VEX_W field?
bit hasVEX_4VPrefix = 0; // Does this inst require the VEX.VVVV field?
@@ -236,26 +237,27 @@
let TSFlags{18-15} = ImmT.Value;
let TSFlags{21-19} = FPForm.Value;
let TSFlags{22} = hasLockPrefix;
- let TSFlags{24-23} = ExeDomain.Value;
- let TSFlags{32-25} = Opcode;
- let TSFlags{33} = hasVEXPrefix;
- let TSFlags{34} = hasVEX_WPrefix;
- let TSFlags{35} = hasVEX_4VPrefix;
- let TSFlags{36} = hasVEX_4VOp3Prefix;
- let TSFlags{37} = hasVEX_i8ImmReg;
- let TSFlags{38} = hasVEX_L;
- let TSFlags{39} = ignoresVEX_L;
- let TSFlags{40} = hasEVEXPrefix;
- let TSFlags{41} = hasEVEX_K;
- let TSFlags{42} = hasEVEX_Z;
- let TSFlags{43} = hasEVEX_L2;
- let TSFlags{44} = hasEVEX_B;
- let TSFlags{46-45} = EVEX_CD8E;
- let TSFlags{49-47} = EVEX_CD8V;
- let TSFlags{50} = has3DNow0F0FOpcode;
- let TSFlags{51} = hasMemOp4Prefix;
- let TSFlags{52} = hasXOP_Prefix;
- let TSFlags{53} = hasEVEX_RC;
+ let TSFlags{23} = hasREPPrefix;
+ let TSFlags{25-24} = ExeDomain.Value;
+ let TSFlags{33-26} = Opcode;
+ let TSFlags{34} = hasVEXPrefix;
+ let TSFlags{35} = hasVEX_WPrefix;
+ let TSFlags{36} = hasVEX_4VPrefix;
+ let TSFlags{37} = hasVEX_4VOp3Prefix;
+ let TSFlags{38} = hasVEX_i8ImmReg;
+ let TSFlags{39} = hasVEX_L;
+ let TSFlags{40} = ignoresVEX_L;
+ let TSFlags{41} = hasEVEXPrefix;
+ let TSFlags{42} = hasEVEX_K;
+ let TSFlags{43} = hasEVEX_Z;
+ let TSFlags{44} = hasEVEX_L2;
+ let TSFlags{45} = hasEVEX_B;
+ let TSFlags{47-46} = EVEX_CD8E;
+ let TSFlags{50-48} = EVEX_CD8V;
+ let TSFlags{51} = has3DNow0F0FOpcode;
+ let TSFlags{52} = hasMemOp4Prefix;
+ let TSFlags{53} = hasXOP_Prefix;
+ let TSFlags{54} = hasEVEX_RC;
}
class PseudoI<dag oops, dag iops, list<dag> pattern>