Track IR ordering of SelectionDAG nodes 2/4.
Change SelectionDAG::getXXXNode() interfaces as well as call sites of
these functions to pass in SDLoc instead of DebugLoc.
llvm-svn: 182703
diff --git a/llvm/lib/Target/X86/X86ISelDAGToDAG.cpp b/llvm/lib/Target/X86/X86ISelDAGToDAG.cpp
index 14bb160..0a29901 100644
--- a/llvm/lib/Target/X86/X86ISelDAGToDAG.cpp
+++ b/llvm/lib/Target/X86/X86ISelDAGToDAG.cpp
@@ -236,7 +236,7 @@
// These are 32-bit even in 64-bit mode since RIP relative offset
// is 32-bit.
if (AM.GV)
- Disp = CurDAG->getTargetGlobalAddress(AM.GV, DebugLoc(),
+ Disp = CurDAG->getTargetGlobalAddress(AM.GV, SDLoc(),
MVT::i32, AM.Disp,
AM.SymbolFlags);
else if (AM.CP)
@@ -373,7 +373,7 @@
else
Ops.push_back(Chain.getOperand(i));
SDValue NewChain =
- CurDAG->getNode(ISD::TokenFactor, Load.getDebugLoc(),
+ CurDAG->getNode(ISD::TokenFactor, SDLoc(Load),
MVT::Other, &Ops[0], Ops.size());
Ops.clear();
Ops.push_back(NewChain);
@@ -524,7 +524,7 @@
MemVT = SrcIsSSE ? SrcVT : DstVT;
SDValue MemTmp = CurDAG->CreateStackTemporary(MemVT);
- DebugLoc dl = N->getDebugLoc();
+ SDLoc dl(N);
// FIXME: optimize the case where the src/dest is a load or store?
SDValue Store = CurDAG->getTruncStore(CurDAG->getEntryNode(), dl,
@@ -782,7 +782,7 @@
return true;
EVT VT = N.getValueType();
- DebugLoc DL = N.getDebugLoc();
+ SDLoc DL(N);
SDValue Eight = DAG.getConstant(8, MVT::i8);
SDValue NewMask = DAG.getConstant(0xff, VT);
SDValue Srl = DAG.getNode(ISD::SRL, DL, VT, X, Eight);
@@ -830,7 +830,7 @@
return true;
EVT VT = N.getValueType();
- DebugLoc DL = N.getDebugLoc();
+ SDLoc DL(N);
SDValue NewMask = DAG.getConstant(Mask >> ShiftAmt, VT);
SDValue NewAnd = DAG.getNode(ISD::AND, DL, VT, X, NewMask);
SDValue NewShift = DAG.getNode(ISD::SHL, DL, VT, NewAnd, Shift.getOperand(1));
@@ -932,11 +932,11 @@
if (ReplacingAnyExtend) {
assert(X.getValueType() != VT);
// We looked through an ANY_EXTEND node, insert a ZERO_EXTEND.
- SDValue NewX = DAG.getNode(ISD::ZERO_EXTEND, X.getDebugLoc(), VT, X);
+ SDValue NewX = DAG.getNode(ISD::ZERO_EXTEND, SDLoc(X), VT, X);
InsertDAGNode(DAG, N, NewX);
X = NewX;
}
- DebugLoc DL = N.getDebugLoc();
+ SDLoc DL(N);
SDValue NewSRLAmt = DAG.getConstant(ShiftAmt + AMShiftAmt, MVT::i8);
SDValue NewSRL = DAG.getNode(ISD::SRL, DL, VT, X, NewSRLAmt);
SDValue NewSHLAmt = DAG.getConstant(AMShiftAmt, MVT::i8);
@@ -960,7 +960,7 @@
bool X86DAGToDAGISel::MatchAddressRecursively(SDValue N, X86ISelAddressMode &AM,
unsigned Depth) {
- DebugLoc dl = N.getDebugLoc();
+ SDLoc dl(N);
DEBUG({
dbgs() << "MatchAddress: ";
AM.dump();
@@ -1502,7 +1502,7 @@
MachineSDNode::mmo_iterator MemOp = MF->allocateMemRefsArray(1);
MemOp[0] = cast<MemSDNode>(Node)->getMemOperand();
const SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, In2L, In2H, Chain};
- SDNode *ResNode = CurDAG->getMachineNode(Opc, Node->getDebugLoc(),
+ SDNode *ResNode = CurDAG->getMachineNode(Opc, SDLoc(Node),
MVT::i32, MVT::i32, MVT::Other, Ops);
cast<MachineSDNode>(ResNode)->setMemRefs(MemOp, MemOp + 1);
return ResNode;
@@ -1637,7 +1637,7 @@
// + empty, the operand is not needed any more with the new op selected.
// + non-empty, otherwise.
static SDValue getAtomicLoadArithTargetConstant(SelectionDAG *CurDAG,
- DebugLoc dl,
+ SDLoc dl,
enum AtomicOpc &Op, EVT NVT,
SDValue Val) {
if (ConstantSDNode *CN = dyn_cast<ConstantSDNode>(Val)) {
@@ -1689,7 +1689,7 @@
if (Node->hasAnyUseOfValue(0))
return 0;
- DebugLoc dl = Node->getDebugLoc();
+ SDLoc dl(Node);
// Optimize common patterns for __sync_or_and_fetch and similar arith
// operations where the result is not used. This allows us to use the "lock"
@@ -1920,7 +1920,7 @@
if (ChainCheck)
// Make a new TokenFactor with all the other input chains except
// for the load.
- InputChain = CurDAG->getNode(ISD::TokenFactor, Chain.getDebugLoc(),
+ InputChain = CurDAG->getNode(ISD::TokenFactor, SDLoc(Chain),
MVT::Other, &ChainOps[0], ChainOps.size());
}
if (!ChainCheck)
@@ -1968,7 +1968,7 @@
SDValue Segment = CurDAG->getRegister(0, MVT::i32);
const SDValue Ops[] = { VSrc, Base, getI8Imm(Scale->getSExtValue()), VIdx,
Disp, Segment, VMask, Chain};
- SDNode *ResNode = CurDAG->getMachineNode(Opc, Node->getDebugLoc(), VTs, Ops);
+ SDNode *ResNode = CurDAG->getMachineNode(Opc, SDLoc(Node), VTs, Ops);
// Node has 2 outputs: VDst and MVT::Other.
// ResNode has 3 outputs: VDst, VMask_wb, and MVT::Other.
// We replace VDst of Node with VDst of ResNode, and Other of Node with Other
@@ -1982,7 +1982,7 @@
EVT NVT = Node->getValueType(0);
unsigned Opc, MOpc;
unsigned Opcode = Node->getOpcode();
- DebugLoc dl = Node->getDebugLoc();
+ SDLoc dl(Node);
DEBUG(dbgs() << "Selecting: "; Node->dump(CurDAG); dbgs() << '\n');
@@ -2666,7 +2666,7 @@
EVT LdVT = LoadNode->getMemoryVT();
unsigned newOpc = getFusedLdStOpcode(LdVT, Opc);
MachineSDNode *Result = CurDAG->getMachineNode(newOpc,
- Node->getDebugLoc(),
+ SDLoc(Node),
MVT::i32, MVT::Other, Ops);
Result->setMemRefs(MemOp, MemOp + 2);