diff --git a/llvm/lib/CodeGen/MachineScheduler.cpp b/llvm/lib/CodeGen/MachineScheduler.cpp
index c87a1be..3f68caf 100644
--- a/llvm/lib/CodeGen/MachineScheduler.cpp
+++ b/llvm/lib/CodeGen/MachineScheduler.cpp
@@ -1097,7 +1097,7 @@
 }
 
 //===----------------------------------------------------------------------===//
-// ConvergingScheduler - Implementation of the standard MachineSchedStrategy.
+// ConvergingScheduler - Implementation of the generic MachineSchedStrategy.
 //===----------------------------------------------------------------------===//
 
 namespace {
@@ -1185,32 +1185,21 @@
     // Critical path through the DAG in expected latency.
     unsigned CriticalPath;
 
+    // Scaled count of micro-ops left to schedule.
+    unsigned RemIssueCount;
+
     // Unscheduled resources
     SmallVector<unsigned, 16> RemainingCounts;
-    // Critical resource for the unscheduled zone.
-    unsigned CritResIdx;
-    // Number of micro-ops left to schedule.
-    unsigned RemainingMicroOps;
 
     void reset() {
       CriticalPath = 0;
+      RemIssueCount = 0;
       RemainingCounts.clear();
-      CritResIdx = 0;
-      RemainingMicroOps = 0;
     }
 
     SchedRemainder() { reset(); }
 
     void init(ScheduleDAGMI *DAG, const TargetSchedModel *SchedModel);
-
-    unsigned getMaxRemainingCount(const TargetSchedModel *SchedModel) const {
-      if (!SchedModel->hasInstrSchedModel())
-        return 0;
-
-      return std::max(
-        RemainingMicroOps * SchedModel->getMicroOpFactor(),
-        RemainingCounts[CritResIdx]);
-    }
   };
 
   /// Each Scheduling boundary is associated with ready queues. It tracks the
@@ -1231,7 +1220,12 @@
 
     ScheduleHazardRecognizer *HazardRec;
 
+    /// Number of cycles it takes to issue the instructions scheduled in this
+    /// zone. It is defined as: scheduled-micro-ops / issue-width + stalls.
+    /// See getStalls().
     unsigned CurrCycle;
+
+    /// Micro-ops issued in the current cycle
     unsigned CurrMOps;
 
     /// MinReadyCycle - Cycle of the soonest available instruction.
@@ -1241,21 +1235,30 @@
     unsigned ExpectedLatency;
 
     // The latency of dependence chains leading into this zone.
-    // For each node scheduled: DLat = max DLat, N.Depth.
+    // For each node scheduled top-down: DLat = max DLat, N.Depth.
     // For each cycle scheduled: DLat -= 1.
     unsigned DependentLatency;
 
-    // Resources used in the scheduled zone beyond this boundary.
-    SmallVector<unsigned, 16> ResourceCounts;
+    /// Count the scheduled (issued) micro-ops that can be retired by
+    /// time=CurrCycle assuming the first scheduled instr is retired at time=0.
+    unsigned RetiredMOps;
+
+    // Count scheduled resources that have been executed. Resources are
+    // considered executed if they become ready in the time that it takes to
+    // saturate any resource including the one in question. Counts are scaled
+    // for direct comparison with other resources. Counts ca be compared with
+    // MOps * getMicroOpFactor and Latency * getLatencyFactor.
+    SmallVector<unsigned, 16> ExecutedResCounts;
+
+    /// Cache the max count for a single resource.
+    unsigned MaxExecutedResCount;
 
     // Cache the critical resources ID in this scheduled zone.
-    unsigned CritResIdx;
+    unsigned ZoneCritResIdx;
 
     // Is the scheduled region resource limited vs. latency limited.
     bool IsResourceLimited;
 
-    unsigned ExpectedCount;
-
 #ifndef NDEBUG
     // Remember the greatest operand latency as an upper bound on the number of
     // times we should retry the pending queue because of a hazard.
@@ -1276,16 +1279,16 @@
       MinReadyCycle = UINT_MAX;
       ExpectedLatency = 0;
       DependentLatency = 0;
-      ResourceCounts.resize(1);
-      assert(!ResourceCounts[0] && "nonzero count for bad resource");
-      CritResIdx = 0;
+      RetiredMOps = 0;
+      MaxExecutedResCount = 0;
+      ZoneCritResIdx = 0;
       IsResourceLimited = false;
-      ExpectedCount = 0;
 #ifndef NDEBUG
       MaxObservedLatency = 0;
 #endif
       // Reserve a zero-count for invalid CritResIdx.
-      ResourceCounts.resize(1);
+      ExecutedResCounts.resize(1);
+      assert(!ExecutedResCounts[0] && "nonzero count for bad resource");
     }
 
     /// Pending queues extend the ready queues with the same ID and the
@@ -1306,25 +1309,58 @@
       return Available.getID() == ConvergingScheduler::TopQID;
     }
 
-    unsigned getUnscheduledLatency(SUnit *SU) const {
-      if (isTop())
-        return SU->getHeight();
-      return SU->getDepth() + SU->Latency;
+    const char *getResourceName(unsigned PIdx) {
+      if (!PIdx)
+        return "MOps";
+      return SchedModel->getProcResource(PIdx)->Name;
     }
 
+    /// Get the number of latency cycles "covered" by the scheduled
+    /// instructions. This is the larger of the critical path within the zone
+    /// and the number of cycles required to issue the instructions.
+    unsigned getScheduledLatency() const {
+      return std::max(ExpectedLatency, CurrCycle);
+    }
+
+    unsigned getUnscheduledLatency(SUnit *SU) const {
+      return isTop() ? SU->getHeight() : SU->getDepth();
+    }
+
+    unsigned getResourceCount(unsigned ResIdx) const {
+      return ExecutedResCounts[ResIdx];
+    }
+
+    /// Get the scaled count of scheduled micro-ops and resources, including
+    /// executed resources.
     unsigned getCriticalCount() const {
-      return ResourceCounts[CritResIdx];
+      if (!ZoneCritResIdx)
+        return RetiredMOps * SchedModel->getMicroOpFactor();
+      return getResourceCount(ZoneCritResIdx);
+    }
+
+    /// Get a scaled count for the minimum execution time of the scheduled
+    /// micro-ops that are ready to execute by getExecutedCount. Notice the
+    /// feedback loop.
+    unsigned getExecutedCount() const {
+      return std::max(CurrCycle * SchedModel->getLatencyFactor(),
+                      MaxExecutedResCount);
     }
 
     bool checkHazard(SUnit *SU);
 
-    void setLatencyPolicy(CandPolicy &Policy);
+    unsigned findMaxLatency(ArrayRef<SUnit*> ReadySUs);
+
+    unsigned getOtherResourceCount(unsigned &OtherCritIdx);
+
+    void setPolicy(CandPolicy &Policy, SchedBoundary &OtherZone);
 
     void releaseNode(SUnit *SU, unsigned ReadyCycle);
 
-    void bumpCycle();
+    void bumpCycle(unsigned NextCycle);
 
-    void countResource(unsigned PIdx, unsigned Cycles);
+    void incExecutedResources(unsigned PIdx, unsigned Count);
+
+    unsigned countResource(unsigned PIdx, unsigned Cycles, unsigned ReadyCycle);
 
     void bumpNode(SUnit *SU);
 
@@ -1333,6 +1369,8 @@
     void removeReady(SUnit *SU);
 
     SUnit *pickOnlyChoice();
+
+    void dumpScheduledState();
   };
 
 private:
@@ -1369,15 +1407,6 @@
   virtual void registerRoots();
 
 protected:
-  void balanceZones(
-    ConvergingScheduler::SchedBoundary &CriticalZone,
-    ConvergingScheduler::SchedCandidate &CriticalCand,
-    ConvergingScheduler::SchedBoundary &OppositeZone,
-    ConvergingScheduler::SchedCandidate &OppositeCand);
-
-  void checkResourceLimits(ConvergingScheduler::SchedCandidate &TopCand,
-                           ConvergingScheduler::SchedCandidate &BotCand);
-
   void tryCandidate(SchedCandidate &Cand,
                     SchedCandidate &TryCand,
                     SchedBoundary &Zone,
@@ -1407,7 +1436,8 @@
   for (std::vector<SUnit>::iterator
          I = DAG->SUnits.begin(), E = DAG->SUnits.end(); I != E; ++I) {
     const MCSchedClassDesc *SC = DAG->getSchedClass(&*I);
-    RemainingMicroOps += SchedModel->getNumMicroOps(I->getInstr(), SC);
+    RemIssueCount += SchedModel->getNumMicroOps(I->getInstr(), SC)
+      * SchedModel->getMicroOpFactor();
     for (TargetSchedModel::ProcResIter
            PI = SchedModel->getWriteProcResBegin(SC),
            PE = SchedModel->getWriteProcResEnd(SC); PI != PE; ++PI) {
@@ -1416,17 +1446,6 @@
       RemainingCounts[PIdx] += (Factor * PI->Cycles);
     }
   }
-  for (unsigned PIdx = 0, PEnd = SchedModel->getNumProcResourceKinds();
-       PIdx != PEnd; ++PIdx) {
-    if ((int)(RemainingCounts[PIdx] - RemainingCounts[CritResIdx])
-        >= (int)SchedModel->getLatencyFactor()) {
-      CritResIdx = PIdx;
-    }
-  }
-  DEBUG(dbgs() << "Critical Resource: "
-        << SchedModel->getProcResource(CritResIdx)->Name
-        << ": " << RemainingCounts[CritResIdx]
-        << " / " << SchedModel->getLatencyFactor() << '\n');
 }
 
 void ConvergingScheduler::SchedBoundary::
@@ -1436,7 +1455,7 @@
   SchedModel = smodel;
   Rem = rem;
   if (SchedModel->hasInstrSchedModel())
-    ResourceCounts.resize(SchedModel->getNumProcResourceKinds());
+    ExecutedResCounts.resize(SchedModel->getNumProcResourceKinds());
 }
 
 void ConvergingScheduler::initialize(ScheduleDAGMI *dag) {
@@ -1538,50 +1557,125 @@
   return false;
 }
 
-/// Compute the remaining latency to determine whether ILP should be increased.
-void ConvergingScheduler::SchedBoundary::setLatencyPolicy(CandPolicy &Policy) {
-  DEBUG(dbgs() << "  " << Available.getName()
-        << " DependentLatency " << DependentLatency << '\n');
-
-  // FIXME: compile time. In all, we visit four queues here one we should only
-  // need to visit the one that was last popped if we cache the result.
-  unsigned RemLatency = DependentLatency;
-  for (ReadyQueue::iterator I = Available.begin(), E = Available.end();
+// Find the unscheduled node in ReadySUs with the highest latency.
+unsigned ConvergingScheduler::SchedBoundary::
+findMaxLatency(ArrayRef<SUnit*> ReadySUs) {
+  SUnit *LateSU = 0;
+  unsigned RemLatency = 0;
+  for (ArrayRef<SUnit*>::iterator I = ReadySUs.begin(), E = ReadySUs.end();
        I != E; ++I) {
     unsigned L = getUnscheduledLatency(*I);
     if (L > RemLatency) {
-      DEBUG(dbgs() << "  " << Available.getName()
-            << " RemLatency SU(" << (*I)->NodeNum << ") " << L << '\n');
       RemLatency = L;
+      LateSU = *I;
     }
   }
-  for (ReadyQueue::iterator I = Pending.begin(), E = Pending.end();
-       I != E; ++I) {
-    unsigned L = getUnscheduledLatency(*I);
-    if (L > RemLatency)
-      RemLatency = L;
+  if (LateSU) {
+    DEBUG(dbgs() << Available.getName() << " RemLatency SU("
+          << LateSU->NodeNum << ") " << RemLatency << "c\n");
   }
-  unsigned CriticalPathLimit = Rem->CriticalPath;
-  DEBUG(dbgs() << "  " << Available.getName()
-        << " ExpectedLatency " << ExpectedLatency
-        << " CP Limit " << CriticalPathLimit << '\n');
+  return RemLatency;
+}
 
-  if (RemLatency + std::max(ExpectedLatency, CurrCycle) >= CriticalPathLimit
-      && RemLatency > Rem->getMaxRemainingCount(SchedModel)) {
-    Policy.ReduceLatency = true;
-    DEBUG(dbgs() << "  Increase ILP: " << Available.getName() << '\n');
+// Count resources in this zone and the remaining unscheduled
+// instruction. Return the max count, scaled. Set OtherCritIdx to the critical
+// resource index, or zero if the zone is issue limited.
+unsigned ConvergingScheduler::SchedBoundary::
+getOtherResourceCount(unsigned &OtherCritIdx) {
+  if (!SchedModel->hasInstrSchedModel())
+    return 0;
+
+  unsigned OtherCritCount = Rem->RemIssueCount
+    + (RetiredMOps * SchedModel->getMicroOpFactor());
+  DEBUG(dbgs() << "  " << Available.getName() << " + Remain MOps: "
+        << OtherCritCount / SchedModel->getMicroOpFactor() << '\n');
+  OtherCritIdx = 0;
+  for (unsigned PIdx = 1, PEnd = SchedModel->getNumProcResourceKinds();
+       PIdx != PEnd; ++PIdx) {
+    unsigned OtherCount = getResourceCount(PIdx) + Rem->RemainingCounts[PIdx];
+    if (OtherCount > OtherCritCount) {
+      OtherCritCount = OtherCount;
+      OtherCritIdx = PIdx;
+    }
   }
+  if (OtherCritIdx) {
+    DEBUG(dbgs() << "  " << Available.getName() << " + Remain CritRes: "
+          << OtherCritCount / SchedModel->getResourceFactor(OtherCritIdx)
+          << " " << getResourceName(OtherCritIdx) << "\n");
+  }
+  return OtherCritCount;
+}
+
+/// Set the CandPolicy for this zone given the current resources and latencies
+/// inside and outside the zone.
+void ConvergingScheduler::SchedBoundary::setPolicy(CandPolicy &Policy,
+                                                   SchedBoundary &OtherZone) {
+  // Now that potential stalls have been considered, apply preemptive heuristics
+  // based on the the total latency and resources inside and outside this
+  // zone.
+
+  // Compute remaining latency. We need this both to determine whether the
+  // overall schedule has become latency-limited and whether the instructions
+  // outside this zone are resource or latency limited.
+  //
+  // The "dependent" latency is updated incrementally during scheduling as the
+  // max height/depth of scheduled nodes minus the cycles since it was
+  // scheduled:
+  //   DLat = max (N.depth - (CurrCycle - N.ReadyCycle) for N in Zone
+  //
+  // The "independent" latency is the max ready queue depth:
+  //   ILat = max N.depth for N in Available|Pending
+  //
+  // RemainingLatency is the greater of independent and dependent latency.
+  unsigned RemLatency = DependentLatency;
+  RemLatency = std::max(RemLatency, findMaxLatency(Available.elements()));
+  RemLatency = std::max(RemLatency, findMaxLatency(Pending.elements()));
+
+  // Compute the critical resource outside the zone.
+  unsigned OtherCritIdx;
+  unsigned OtherCount = OtherZone.getOtherResourceCount(OtherCritIdx);
+
+  bool OtherResLimited = false;
+  if (SchedModel->hasInstrSchedModel()) {
+    unsigned LFactor = SchedModel->getLatencyFactor();
+    OtherResLimited = (int)(OtherCount - (RemLatency * LFactor)) > (int)LFactor;
+  }
+  if (!OtherResLimited && (RemLatency + CurrCycle > Rem->CriticalPath)) {
+    Policy.ReduceLatency |= true;
+    DEBUG(dbgs() << "  " << Available.getName() << " RemainingLatency "
+          << RemLatency << " + " << CurrCycle << "c > CritPath "
+          << Rem->CriticalPath << "\n");
+  }
+  // If the same resource is limiting inside and outside the zone, do nothing.
+  if (IsResourceLimited && OtherResLimited && (ZoneCritResIdx == OtherCritIdx))
+    return;
+
+  DEBUG(
+    if (IsResourceLimited) {
+      dbgs() << "  " << Available.getName() << " ResourceLimited: "
+             << getResourceName(ZoneCritResIdx) << "\n";
+    }
+    if (OtherResLimited)
+      dbgs() << "  RemainingLimit: " << getResourceName(OtherCritIdx);
+    if (!IsResourceLimited && !OtherResLimited)
+      dbgs() << "  Latency limited both directions.\n");
+
+  if (IsResourceLimited && !Policy.ReduceResIdx)
+    Policy.ReduceResIdx = ZoneCritResIdx;
+
+  if (OtherResLimited)
+    Policy.DemandResIdx = OtherCritIdx;
 }
 
 void ConvergingScheduler::SchedBoundary::releaseNode(SUnit *SU,
                                                      unsigned ReadyCycle) {
-
   if (ReadyCycle < MinReadyCycle)
     MinReadyCycle = ReadyCycle;
 
   // Check for interlocks first. For the purpose of other heuristics, an
   // instruction that cannot issue appears as if it's not in the ReadyQueue.
-  if (ReadyCycle > CurrCycle || checkHazard(SU))
+  bool IsBuffered = SchedModel->getMicroOpBufferSize() != 0;
+  if ((!IsBuffered && ReadyCycle > CurrCycle) || checkHazard(SU))
     Pending.push(SU);
   else
     Available.push(SU);
@@ -1591,16 +1685,17 @@
 }
 
 /// Move the boundary of scheduled code by one cycle.
-void ConvergingScheduler::SchedBoundary::bumpCycle() {
-  unsigned Width = SchedModel->getIssueWidth();
-  CurrMOps = (CurrMOps <= Width) ? 0 : CurrMOps - Width;
-
-  unsigned NextCycle = CurrCycle + 1;
-  assert(MinReadyCycle < UINT_MAX && "MinReadyCycle uninitialized");
-  if (MinReadyCycle > NextCycle) {
-    CurrMOps = 0;
-    NextCycle = MinReadyCycle;
+void ConvergingScheduler::SchedBoundary::bumpCycle(unsigned NextCycle) {
+  if (SchedModel->getMicroOpBufferSize() == 0) {
+    assert(MinReadyCycle < UINT_MAX && "MinReadyCycle uninitialized");
+    if (MinReadyCycle > NextCycle)
+      NextCycle = MinReadyCycle;
   }
+  // Update the current micro-ops, which will issue in the next cycle.
+  unsigned DecMOps = SchedModel->getIssueWidth() * (NextCycle - CurrCycle);
+  CurrMOps = (CurrMOps <= DecMOps) ? 0 : CurrMOps - DecMOps;
+
+  // Decrement DependentLatency based on the next cycle.
   if ((NextCycle - CurrCycle) > DependentLatency)
     DependentLatency = 0;
   else
@@ -1620,34 +1715,52 @@
     }
   }
   CheckPending = true;
-  IsResourceLimited = getCriticalCount() > std::max(ExpectedLatency, CurrCycle);
+  unsigned LFactor = SchedModel->getLatencyFactor();
+  IsResourceLimited =
+    (int)(getCriticalCount() - (getScheduledLatency() * LFactor))
+    > (int)LFactor;
 
-  DEBUG(dbgs() << "  " << Available.getName()
-        << " Cycle: " << CurrCycle << '\n');
+  DEBUG(dbgs() << "Cycle: " << CurrCycle << ' ' << Available.getName() << '\n');
+}
+
+void ConvergingScheduler::SchedBoundary::incExecutedResources(unsigned PIdx,
+                                                              unsigned Count) {
+  ExecutedResCounts[PIdx] += Count;
+  if (ExecutedResCounts[PIdx] > MaxExecutedResCount)
+    MaxExecutedResCount = ExecutedResCounts[PIdx];
 }
 
 /// Add the given processor resource to this scheduled zone.
-void ConvergingScheduler::SchedBoundary::countResource(unsigned PIdx,
-                                                       unsigned Cycles) {
+///
+/// \param Cycles indicates the number of consecutive (non-pipelined) cycles
+/// during which this resource is consumed.
+///
+/// \return the next cycle at which the instruction may execute without
+/// oversubscribing resources.
+unsigned ConvergingScheduler::SchedBoundary::
+countResource(unsigned PIdx, unsigned Cycles, unsigned ReadyCycle) {
   unsigned Factor = SchedModel->getResourceFactor(PIdx);
-  DEBUG(dbgs() << "  " << SchedModel->getProcResource(PIdx)->Name
-        << " +(" << Cycles << "x" << Factor
-        << ") / " << SchedModel->getLatencyFactor() << '\n');
-
   unsigned Count = Factor * Cycles;
-  ResourceCounts[PIdx] += Count;
+  DEBUG(dbgs() << "  " << getResourceName(PIdx)
+        << " +" << Cycles << "x" << Factor << "u\n");
+
+  // Update Executed resources counts.
+  incExecutedResources(PIdx, Count);
   assert(Rem->RemainingCounts[PIdx] >= Count && "resource double counted");
   Rem->RemainingCounts[PIdx] -= Count;
 
   // Check if this resource exceeds the current critical resource by a full
   // cycle. If so, it becomes the critical resource.
-  if ((int)(ResourceCounts[PIdx] - ResourceCounts[CritResIdx])
-      >= (int)SchedModel->getLatencyFactor()) {
-    CritResIdx = PIdx;
+  if (ZoneCritResIdx != PIdx
+      && ((int)(getResourceCount(PIdx) - getCriticalCount())
+          >= (int)SchedModel->getLatencyFactor())) {
+    ZoneCritResIdx = PIdx;
     DEBUG(dbgs() << "  *** Critical resource "
-          << SchedModel->getProcResource(PIdx)->Name << " x"
-          << ResourceCounts[PIdx] << '\n');
+          << getResourceName(PIdx) << ": "
+          << getResourceCount(PIdx) / SchedModel->getLatencyFactor() << "c\n");
   }
+  // TODO: We don't yet model reserved resources. It's not hard though.
+  return CurrCycle;
 }
 
 /// Move the boundary of scheduled code by one SUnit.
@@ -1661,38 +1774,96 @@
     }
     HazardRec->EmitInstruction(SU);
   }
-  // Update resource counts and critical resource.
-  if (SchedModel->hasInstrSchedModel()) {
-    const MCSchedClassDesc *SC = DAG->getSchedClass(SU);
-    Rem->RemainingMicroOps -= SchedModel->getNumMicroOps(SU->getInstr(), SC);
-    for (TargetSchedModel::ProcResIter
-           PI = SchedModel->getWriteProcResBegin(SC),
-           PE = SchedModel->getWriteProcResEnd(SC); PI != PE; ++PI) {
-      countResource(PI->ProcResourceIdx, PI->Cycles);
-    }
-  }
-  unsigned &TopLatency = isTop() ? ExpectedLatency : DependentLatency;
-  unsigned &BotLatency = isTop() ? DependentLatency : ExpectedLatency;
-  if (SU->getDepth() > TopLatency)
-    TopLatency = SU->getDepth();
-  if (SU->getHeight() > BotLatency)
-    BotLatency = SU->getHeight();
-
-  IsResourceLimited = getCriticalCount() > std::max(ExpectedLatency, CurrCycle);
-
-  // Check the instruction group dispatch limit.
-  // TODO: Check if this SU must end a dispatch group.
-  CurrMOps += SchedModel->getNumMicroOps(SU->getInstr());
-
+  const MCSchedClassDesc *SC = DAG->getSchedClass(SU);
+  unsigned IncMOps = SchedModel->getNumMicroOps(SU->getInstr());
+  CurrMOps += IncMOps;
   // checkHazard prevents scheduling multiple instructions per cycle that exceed
   // issue width. However, we commonly reach the maximum. In this case
   // opportunistically bump the cycle to avoid uselessly checking everything in
   // the readyQ. Furthermore, a single instruction may produce more than one
   // cycle's worth of micro-ops.
+  //
+  // TODO: Also check if this SU must end a dispatch group.
+  unsigned NextCycle = CurrCycle;
   if (CurrMOps >= SchedModel->getIssueWidth()) {
-    DEBUG(dbgs() << "  *** Max instrs at cycle " << CurrCycle << '\n');
-    bumpCycle();
+    ++NextCycle;
+    DEBUG(dbgs() << "  *** Max MOps " << CurrMOps
+          << " at cycle " << CurrCycle << '\n');
   }
+  unsigned ReadyCycle = (isTop() ? SU->TopReadyCycle : SU->BotReadyCycle);
+  DEBUG(dbgs() << "  Ready @" << ReadyCycle << "c\n");
+
+  switch (SchedModel->getMicroOpBufferSize()) {
+  case 0:
+    assert(ReadyCycle <= CurrCycle && "Broken PendingQueue");
+    break;
+  case 1:
+    if (ReadyCycle > NextCycle) {
+      NextCycle = ReadyCycle;
+      DEBUG(dbgs() << "  *** Stall until: " << ReadyCycle << "\n");
+    }
+    break;
+  default:
+    // We don't currently model the OOO reorder buffer, so consider all
+    // scheduled MOps to be "retired".
+    break;
+  }
+  RetiredMOps += IncMOps;
+
+  // Update resource counts and critical resource.
+  if (SchedModel->hasInstrSchedModel()) {
+    unsigned DecRemIssue = IncMOps * SchedModel->getMicroOpFactor();
+    assert(Rem->RemIssueCount >= DecRemIssue && "MOps double counted");
+    Rem->RemIssueCount -= DecRemIssue;
+    if (ZoneCritResIdx) {
+      // Scale scheduled micro-ops for comparing with the critical resource.
+      unsigned ScaledMOps =
+        RetiredMOps * SchedModel->getMicroOpFactor();
+
+      // If scaled micro-ops are now more than the previous critical resource by
+      // a full cycle, then micro-ops issue becomes critical.
+      if ((int)(ScaledMOps - getResourceCount(ZoneCritResIdx))
+          >= (int)SchedModel->getLatencyFactor()) {
+        ZoneCritResIdx = 0;
+        DEBUG(dbgs() << "  *** Critical resource NumMicroOps: "
+              << ScaledMOps / SchedModel->getLatencyFactor() << "c\n");
+      }
+    }
+    for (TargetSchedModel::ProcResIter
+           PI = SchedModel->getWriteProcResBegin(SC),
+           PE = SchedModel->getWriteProcResEnd(SC); PI != PE; ++PI) {
+      unsigned RCycle =
+        countResource(PI->ProcResourceIdx, PI->Cycles, ReadyCycle);
+      if (RCycle > NextCycle)
+        NextCycle = RCycle;
+    }
+  }
+  // Update ExpectedLatency and DependentLatency.
+  unsigned &TopLatency = isTop() ? ExpectedLatency : DependentLatency;
+  unsigned &BotLatency = isTop() ? DependentLatency : ExpectedLatency;
+  if (SU->getDepth() > TopLatency) {
+    TopLatency = SU->getDepth();
+    DEBUG(dbgs() << "  " << Available.getName()
+          << " TopLatency SU(" << SU->NodeNum << ") " << TopLatency << "c\n");
+  }
+  if (SU->getHeight() > BotLatency) {
+    BotLatency = SU->getHeight();
+    DEBUG(dbgs() << "  " << Available.getName()
+          << " BotLatency SU(" << SU->NodeNum << ") " << BotLatency << "c\n");
+  }
+  // If we stall for any reason, bump the cycle.
+  if (NextCycle > CurrCycle) {
+    bumpCycle(NextCycle);
+  }
+  else {
+    // After updating ZoneCritResIdx and ExpectedLatency, check if we're
+    // resource limited. If a stall occured, bumpCycle does this.
+    unsigned LFactor = SchedModel->getLatencyFactor();
+    IsResourceLimited =
+      (int)(getCriticalCount() - (getScheduledLatency() * LFactor))
+      > (int)LFactor;
+  }
+  DEBUG(dumpScheduledState());
 }
 
 /// Release pending ready nodes in to the available queue. This makes them
@@ -1704,6 +1875,7 @@
 
   // Check to see if any of the pending instructions are ready to issue.  If
   // so, add them to the available queue.
+  bool IsBuffered = SchedModel->getMicroOpBufferSize() != 0;
   for (unsigned i = 0, e = Pending.size(); i != e; ++i) {
     SUnit *SU = *(Pending.begin()+i);
     unsigned ReadyCycle = isTop() ? SU->TopReadyCycle : SU->BotReadyCycle;
@@ -1711,7 +1883,7 @@
     if (ReadyCycle < MinReadyCycle)
       MinReadyCycle = ReadyCycle;
 
-    if (ReadyCycle > CurrCycle)
+    if (!IsBuffered && ReadyCycle > CurrCycle)
       continue;
 
     if (checkHazard(SU))
@@ -1756,7 +1928,7 @@
   for (unsigned i = 0; Available.empty(); ++i) {
     assert(i <= (HazardRec->getMaxLookAhead() + MaxObservedLatency) &&
            "permanent hazard"); (void)i;
-    bumpCycle();
+    bumpCycle(CurrCycle + 1);
     releasePending();
   }
   if (Available.size() == 1)
@@ -1764,103 +1936,28 @@
   return NULL;
 }
 
-/// Record the candidate policy for opposite zones with different critical
-/// resources.
-///
-/// If the CriticalZone is latency limited, don't force a policy for the
-/// candidates here. Instead, setLatencyPolicy sets ReduceLatency if needed.
-void ConvergingScheduler::balanceZones(
-  ConvergingScheduler::SchedBoundary &CriticalZone,
-  ConvergingScheduler::SchedCandidate &CriticalCand,
-  ConvergingScheduler::SchedBoundary &OppositeZone,
-  ConvergingScheduler::SchedCandidate &OppositeCand) {
-
-  if (!CriticalZone.IsResourceLimited)
-    return;
-  assert(SchedModel->hasInstrSchedModel() && "required schedmodel");
-
-  SchedRemainder *Rem = CriticalZone.Rem;
-
-  // If the critical zone is overconsuming a resource relative to the
-  // remainder, try to reduce it.
-  unsigned RemainingCritCount =
-    Rem->RemainingCounts[CriticalZone.CritResIdx];
-  if ((int)(Rem->getMaxRemainingCount(SchedModel) - RemainingCritCount)
-      > (int)SchedModel->getLatencyFactor()) {
-    CriticalCand.Policy.ReduceResIdx = CriticalZone.CritResIdx;
-    DEBUG(dbgs() << "  Balance " << CriticalZone.Available.getName()
-          << " reduce "
-          << SchedModel->getProcResource(CriticalZone.CritResIdx)->Name
-          << '\n');
+// This is useful information to dump after bumpNode.
+// Note that the Queue contents are more useful before pickNodeFromQueue.
+void ConvergingScheduler::SchedBoundary::dumpScheduledState() {
+  unsigned ResFactor;
+  unsigned ResCount;
+  if (ZoneCritResIdx) {
+    ResFactor = SchedModel->getResourceFactor(ZoneCritResIdx);
+    ResCount = getResourceCount(ZoneCritResIdx);
   }
-  // If the other zone is underconsuming a resource relative to the full zone,
-  // try to increase it.
-  unsigned OppositeCount =
-    OppositeZone.ResourceCounts[CriticalZone.CritResIdx];
-  if ((int)(OppositeZone.ExpectedCount - OppositeCount)
-      > (int)SchedModel->getLatencyFactor()) {
-    OppositeCand.Policy.DemandResIdx = CriticalZone.CritResIdx;
-    DEBUG(dbgs() << "  Balance " << OppositeZone.Available.getName()
-          << " demand "
-          << SchedModel->getProcResource(OppositeZone.CritResIdx)->Name
-          << '\n');
+  else {
+    ResFactor = SchedModel->getMicroOpFactor();
+    ResCount = RetiredMOps * SchedModel->getMicroOpFactor();
   }
-}
-
-/// Determine if the scheduled zones exceed resource limits or critical path and
-/// set each candidate's ReduceHeight policy accordingly.
-void ConvergingScheduler::checkResourceLimits(
-  ConvergingScheduler::SchedCandidate &TopCand,
-  ConvergingScheduler::SchedCandidate &BotCand) {
-
-  // Set ReduceLatency to true if needed.
-  Bot.setLatencyPolicy(BotCand.Policy);
-  Top.setLatencyPolicy(TopCand.Policy);
-
-  // Handle resource-limited regions.
-  if (Top.IsResourceLimited && Bot.IsResourceLimited
-      && Top.CritResIdx == Bot.CritResIdx) {
-    // If the scheduled critical resource in both zones is no longer the
-    // critical remaining resource, attempt to reduce resource height both ways.
-    if (Top.CritResIdx != Rem.CritResIdx) {
-      TopCand.Policy.ReduceResIdx = Top.CritResIdx;
-      BotCand.Policy.ReduceResIdx = Bot.CritResIdx;
-      DEBUG(dbgs() << "  Reduce scheduled "
-            << SchedModel->getProcResource(Top.CritResIdx)->Name << '\n');
-    }
-    return;
-  }
-  // Handle latency-limited regions.
-  if (!Top.IsResourceLimited && !Bot.IsResourceLimited) {
-    // If the total scheduled expected latency exceeds the region's critical
-    // path then reduce latency both ways.
-    //
-    // Just because a zone is not resource limited does not mean it is latency
-    // limited. Unbuffered resource, such as max micro-ops may cause CurrCycle
-    // to exceed expected latency.
-    if ((Top.ExpectedLatency + Bot.ExpectedLatency >= Rem.CriticalPath)
-        && (Rem.CriticalPath > Top.CurrCycle + Bot.CurrCycle)) {
-      TopCand.Policy.ReduceLatency = true;
-      BotCand.Policy.ReduceLatency = true;
-      DEBUG(dbgs() << "  Reduce scheduled latency " << Top.ExpectedLatency
-            << " + " << Bot.ExpectedLatency << '\n');
-    }
-    return;
-  }
-  // The critical resource is different in each zone, so request balancing.
-
-  // Compute the cost of each zone.
-  Top.ExpectedCount = std::max(Top.ExpectedLatency, Top.CurrCycle);
-  Top.ExpectedCount = std::max(
-    Top.getCriticalCount(),
-    Top.ExpectedCount * SchedModel->getLatencyFactor());
-  Bot.ExpectedCount = std::max(Bot.ExpectedLatency, Bot.CurrCycle);
-  Bot.ExpectedCount = std::max(
-    Bot.getCriticalCount(),
-    Bot.ExpectedCount * SchedModel->getLatencyFactor());
-
-  balanceZones(Top, TopCand, Bot, BotCand);
-  balanceZones(Bot, BotCand, Top, TopCand);
+  unsigned LFactor = SchedModel->getLatencyFactor();
+  dbgs() << Available.getName() << " @" << CurrCycle << "c\n"
+         << "  Retired: " << RetiredMOps;
+  dbgs() << "\n  Executed: " << getExecutedCount() / LFactor << "c";
+  dbgs() << "\n  Critical: " << ResCount / LFactor << "c, "
+         << ResCount / ResFactor << " " << getResourceName(ZoneCritResIdx)
+         << "\n  ExpectedLatency: " << ExpectedLatency << "c\n"
+         << (IsResourceLimited ? "  - Resource" : "  - Latency")
+         << " limited.\n";
 }
 
 void ConvergingScheduler::SchedCandidate::
@@ -2030,8 +2127,7 @@
   // Avoid serializing long latency dependence chains.
   if (Cand.Policy.ReduceLatency) {
     if (Zone.isTop()) {
-      if (Cand.SU->getDepth() * SchedModel->getLatencyFactor()
-          > Zone.ExpectedCount) {
+      if (Cand.SU->getDepth() > Zone.getScheduledLatency()) {
         if (tryLess(TryCand.SU->getDepth(), Cand.SU->getDepth(),
                     TryCand, Cand, TopDepthReduce))
           return;
@@ -2041,8 +2137,7 @@
         return;
     }
     else {
-      if (Cand.SU->getHeight() * SchedModel->getLatencyFactor()
-          > Zone.ExpectedCount) {
+      if (Cand.SU->getHeight() > Zone.getScheduledLatency()) {
         if (tryLess(TryCand.SU->getHeight(), Cand.SU->getHeight(),
                     TryCand, Cand, BotHeightReduce))
           return;
@@ -2061,8 +2156,8 @@
     Cand.Reason = MultiPressure;
 
   // Prefer immediate defs/users of the last scheduled instruction. This is a
-  // nice pressure avoidance strategy that also conserves the processor's
-  // register renaming resources and keeps the machine code readable.
+  // local pressure avoidance strategy that also makes the machine code
+  // readable.
   if (tryGreater(Zone.NextSUs.count(TryCand.SU), Zone.NextSUs.count(Cand.SU),
                  TryCand, Cand, NextDefUse))
     return;
@@ -2224,18 +2319,19 @@
   // efficient, but also provides the best heuristics for CriticalPSets.
   if (SUnit *SU = Bot.pickOnlyChoice()) {
     IsTopNode = false;
-    DEBUG(dbgs() << "Pick Top NOCAND\n");
+    DEBUG(dbgs() << "Pick Bot NOCAND\n");
     return SU;
   }
   if (SUnit *SU = Top.pickOnlyChoice()) {
     IsTopNode = true;
-    DEBUG(dbgs() << "Pick Bot NOCAND\n");
+    DEBUG(dbgs() << "Pick Top NOCAND\n");
     return SU;
   }
   CandPolicy NoPolicy;
   SchedCandidate BotCand(NoPolicy);
   SchedCandidate TopCand(NoPolicy);
-  checkResourceLimits(TopCand, BotCand);
+  Bot.setPolicy(BotCand.Policy, Top);
+  Top.setPolicy(TopCand.Policy, Bot);
 
   // Prefer bottom scheduling when heuristics are silent.
   pickNodeFromQueue(Bot, DAG->getBotRPTracker(), BotCand);
@@ -2364,13 +2460,13 @@
 /// them here. See comments in biasPhysRegCopy.
 void ConvergingScheduler::schedNode(SUnit *SU, bool IsTopNode) {
   if (IsTopNode) {
-    SU->TopReadyCycle = Top.CurrCycle;
+    SU->TopReadyCycle = std::max(SU->TopReadyCycle, Top.CurrCycle);
     Top.bumpNode(SU);
     if (SU->hasPhysRegUses)
       reschedulePhysRegCopies(SU, true);
   }
   else {
-    SU->BotReadyCycle = Bot.CurrCycle;
+    SU->BotReadyCycle = std::max(SU->BotReadyCycle, Bot.CurrCycle);
     Bot.bumpNode(SU);
     if (SU->hasPhysRegDefs)
       reschedulePhysRegCopies(SU, false);