llvm/lib/Target/PowerPC/PPCISelLowering.cpp

//===-- PPCISelLowering.cpp - PPC DAG Lowering Implementation -------------===//
//
//                     The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file implements the PPCISelLowering class.
//
//===----------------------------------------------------------------------===//

#include "PPCISelLowering.h"
#include "MCTargetDesc/PPCPredicates.h"
#include "PPCMachineFunctionInfo.h"
#include "PPCPerfectShuffle.h"
#include "PPCTargetMachine.h"
#include "PPCTargetObjectFile.h"
#include "llvm/ADT/STLExtras.h"
#include "llvm/ADT/StringSwitch.h"
#include "llvm/ADT/Triple.h"
#include "llvm/CodeGen/CallingConvLower.h"
#include "llvm/CodeGen/MachineFrameInfo.h"
#include "llvm/CodeGen/MachineFunction.h"
#include "llvm/CodeGen/MachineInstrBuilder.h"
#include "llvm/CodeGen/MachineRegisterInfo.h"
#include "llvm/CodeGen/SelectionDAG.h"
#include "llvm/CodeGen/TargetLoweringObjectFileImpl.h"
#include "llvm/IR/CallingConv.h"
#include "llvm/IR/Constants.h"
#include "llvm/IR/DerivedTypes.h"
#include "llvm/IR/Function.h"
#include "llvm/IR/Intrinsics.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/MathExtras.h"
#include "llvm/Support/raw_ostream.h"
#include "llvm/Target/TargetOptions.h"
using namespace llvm;

// FIXME: Remove this once soft-float is supported.
static cl::opt<bool> DisablePPCFloatInVariadic("disable-ppc-float-in-variadic",
cl::desc("disable saving float registers for va_start on PPC"), cl::Hidden);

static cl::opt<bool> DisablePPCPreinc("disable-ppc-preinc",
cl::desc("disable preincrement load/store generation on PPC"), cl::Hidden);

static cl::opt<bool> DisableILPPref("disable-ppc-ilp-pref",
cl::desc("disable setting the node scheduling preference to ILP on PPC"), cl::Hidden);

static cl::opt<bool> DisablePPCUnaligned("disable-ppc-unaligned",
cl::desc("disable unaligned load/store generation on PPC"), cl::Hidden);

// FIXME: Remove this once the bug has been fixed!
extern cl::opt<bool> ANDIGlueBug;

static TargetLoweringObjectFile *createTLOF(const Triple &TT) {
  // If it isn't a Mach-O file then it's going to be a linux ELF
  // object file.
  if (TT.isOSDarwin())
    return new TargetLoweringObjectFileMachO();

  return new PPC64LinuxTargetObjectFile();
}

PPCTargetLowering::PPCTargetLowering(PPCTargetMachine &TM)
    : TargetLowering(TM, createTLOF(Triple(TM.getTargetTriple()))),
      Subtarget(*TM.getSubtargetImpl()) {
  setPow2DivIsCheap();

  // Use _setjmp/_longjmp instead of setjmp/longjmp.
  setUseUnderscoreSetJmp(true);
  setUseUnderscoreLongJmp(true);

  // On PPC32/64, arguments smaller than 4/8 bytes are extended, so all
  // arguments are at least 4/8 bytes aligned.
  bool isPPC64 = Subtarget.isPPC64();
  setMinStackArgumentAlignment(isPPC64 ? 8:4);

  // Set up the register classes.
  addRegisterClass(MVT::i32, &PPC::GPRCRegClass);
  addRegisterClass(MVT::f32, &PPC::F4RCRegClass);
  addRegisterClass(MVT::f64, &PPC::F8RCRegClass);

  // PowerPC has an i16 but no i8 (or i1) SEXTLOAD
  setLoadExtAction(ISD::SEXTLOAD, MVT::i1, Promote);
  setLoadExtAction(ISD::SEXTLOAD, MVT::i8, Expand);

  setTruncStoreAction(MVT::f64, MVT::f32, Expand);

  // PowerPC has pre-inc load and store's.
  setIndexedLoadAction(ISD::PRE_INC, MVT::i1, Legal);
  setIndexedLoadAction(ISD::PRE_INC, MVT::i8, Legal);
  setIndexedLoadAction(ISD::PRE_INC, MVT::i16, Legal);
  setIndexedLoadAction(ISD::PRE_INC, MVT::i32, Legal);
  setIndexedLoadAction(ISD::PRE_INC, MVT::i64, Legal);
  setIndexedStoreAction(ISD::PRE_INC, MVT::i1, Legal);
  setIndexedStoreAction(ISD::PRE_INC, MVT::i8, Legal);
  setIndexedStoreAction(ISD::PRE_INC, MVT::i16, Legal);
  setIndexedStoreAction(ISD::PRE_INC, MVT::i32, Legal);
  setIndexedStoreAction(ISD::PRE_INC, MVT::i64, Legal);

  if (Subtarget.useCRBits()) {
    setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::i1, Expand);

    if (isPPC64 || Subtarget.hasFPCVT()) {
      setOperationAction(ISD::SINT_TO_FP, MVT::i1, Promote);
      AddPromotedToType (ISD::SINT_TO_FP, MVT::i1,
                         isPPC64 ? MVT::i64 : MVT::i32);
      setOperationAction(ISD::UINT_TO_FP, MVT::i1, Promote);
      AddPromotedToType (ISD::UINT_TO_FP, MVT::i1, 
                         isPPC64 ? MVT::i64 : MVT::i32);
    } else {
      setOperationAction(ISD::SINT_TO_FP, MVT::i1, Custom);
      setOperationAction(ISD::UINT_TO_FP, MVT::i1, Custom);
    }

    // PowerPC does not support direct load / store of condition registers
    setOperationAction(ISD::LOAD, MVT::i1, Custom);
    setOperationAction(ISD::STORE, MVT::i1, Custom);

    // FIXME: Remove this once the ANDI glue bug is fixed:
    if (ANDIGlueBug)
      setOperationAction(ISD::TRUNCATE, MVT::i1, Custom);

    setLoadExtAction(ISD::SEXTLOAD, MVT::i1, Promote);
    setLoadExtAction(ISD::ZEXTLOAD, MVT::i1, Promote);
    setTruncStoreAction(MVT::i64, MVT::i1, Expand);
    setTruncStoreAction(MVT::i32, MVT::i1, Expand);
    setTruncStoreAction(MVT::i16, MVT::i1, Expand);
    setTruncStoreAction(MVT::i8, MVT::i1, Expand);

    addRegisterClass(MVT::i1, &PPC::CRBITRCRegClass);
  }

  // This is used in the ppcf128->int sequence.  Note it has different semantics
  // from FP_ROUND:  that rounds to nearest, this rounds to zero.
  setOperationAction(ISD::FP_ROUND_INREG, MVT::ppcf128, Custom);

  // We do not currently implement these libm ops for PowerPC.
  setOperationAction(ISD::FFLOOR, MVT::ppcf128, Expand);
  setOperationAction(ISD::FCEIL,  MVT::ppcf128, Expand);
  setOperationAction(ISD::FTRUNC, MVT::ppcf128, Expand);
  setOperationAction(ISD::FRINT,  MVT::ppcf128, Expand);
  setOperationAction(ISD::FNEARBYINT, MVT::ppcf128, Expand);
  setOperationAction(ISD::FREM, MVT::ppcf128, Expand);

  // PowerPC has no SREM/UREM instructions
  setOperationAction(ISD::SREM, MVT::i32, Expand);
  setOperationAction(ISD::UREM, MVT::i32, Expand);
  setOperationAction(ISD::SREM, MVT::i64, Expand);
  setOperationAction(ISD::UREM, MVT::i64, Expand);

  // Don't use SMUL_LOHI/UMUL_LOHI or SDIVREM/UDIVREM to lower SREM/UREM.
  setOperationAction(ISD::UMUL_LOHI, MVT::i32, Expand);
  setOperationAction(ISD::SMUL_LOHI, MVT::i32, Expand);
  setOperationAction(ISD::UMUL_LOHI, MVT::i64, Expand);
  setOperationAction(ISD::SMUL_LOHI, MVT::i64, Expand);
  setOperationAction(ISD::UDIVREM, MVT::i32, Expand);
  setOperationAction(ISD::SDIVREM, MVT::i32, Expand);
  setOperationAction(ISD::UDIVREM, MVT::i64, Expand);
  setOperationAction(ISD::SDIVREM, MVT::i64, Expand);

  // We don't support sin/cos/sqrt/fmod/pow
  setOperationAction(ISD::FSIN , MVT::f64, Expand);
  setOperationAction(ISD::FCOS , MVT::f64, Expand);
  setOperationAction(ISD::FSINCOS, MVT::f64, Expand);
  setOperationAction(ISD::FREM , MVT::f64, Expand);
  setOperationAction(ISD::FPOW , MVT::f64, Expand);
  setOperationAction(ISD::FMA  , MVT::f64, Legal);
  setOperationAction(ISD::FSIN , MVT::f32, Expand);
  setOperationAction(ISD::FCOS , MVT::f32, Expand);
  setOperationAction(ISD::FSINCOS, MVT::f32, Expand);
  setOperationAction(ISD::FREM , MVT::f32, Expand);
  setOperationAction(ISD::FPOW , MVT::f32, Expand);
  setOperationAction(ISD::FMA  , MVT::f32, Legal);

  setOperationAction(ISD::FLT_ROUNDS_, MVT::i32, Custom);

  // If we're enabling GP optimizations, use hardware square root
  if (!Subtarget.hasFSQRT() &&
      !(TM.Options.UnsafeFPMath &&
        Subtarget.hasFRSQRTE() && Subtarget.hasFRE()))
    setOperationAction(ISD::FSQRT, MVT::f64, Expand);

  if (!Subtarget.hasFSQRT() &&
      !(TM.Options.UnsafeFPMath &&
        Subtarget.hasFRSQRTES() && Subtarget.hasFRES()))
    setOperationAction(ISD::FSQRT, MVT::f32, Expand);

  if (Subtarget.hasFCPSGN()) {
    setOperationAction(ISD::FCOPYSIGN, MVT::f64, Legal);
    setOperationAction(ISD::FCOPYSIGN, MVT::f32, Legal);
  } else {
    setOperationAction(ISD::FCOPYSIGN, MVT::f64, Expand);
    setOperationAction(ISD::FCOPYSIGN, MVT::f32, Expand);
  }

  if (Subtarget.hasFPRND()) {
    setOperationAction(ISD::FFLOOR, MVT::f64, Legal);
    setOperationAction(ISD::FCEIL,  MVT::f64, Legal);
    setOperationAction(ISD::FTRUNC, MVT::f64, Legal);
    setOperationAction(ISD::FROUND, MVT::f64, Legal);

    setOperationAction(ISD::FFLOOR, MVT::f32, Legal);
    setOperationAction(ISD::FCEIL,  MVT::f32, Legal);
    setOperationAction(ISD::FTRUNC, MVT::f32, Legal);
    setOperationAction(ISD::FROUND, MVT::f32, Legal);
  }

  // PowerPC does not have BSWAP, CTPOP or CTTZ
  setOperationAction(ISD::BSWAP, MVT::i32  , Expand);
  setOperationAction(ISD::CTTZ , MVT::i32  , Expand);
  setOperationAction(ISD::CTTZ_ZERO_UNDEF, MVT::i32, Expand);
  setOperationAction(ISD::CTLZ_ZERO_UNDEF, MVT::i32, Expand);
  setOperationAction(ISD::BSWAP, MVT::i64  , Expand);
  setOperationAction(ISD::CTTZ , MVT::i64  , Expand);
  setOperationAction(ISD::CTTZ_ZERO_UNDEF, MVT::i64, Expand);
  setOperationAction(ISD::CTLZ_ZERO_UNDEF, MVT::i64, Expand);

  if (Subtarget.hasPOPCNTD()) {
    setOperationAction(ISD::CTPOP, MVT::i32  , Legal);
    setOperationAction(ISD::CTPOP, MVT::i64  , Legal);
  } else {
    setOperationAction(ISD::CTPOP, MVT::i32  , Expand);
    setOperationAction(ISD::CTPOP, MVT::i64  , Expand);
  }

  // PowerPC does not have ROTR
  setOperationAction(ISD::ROTR, MVT::i32   , Expand);
  setOperationAction(ISD::ROTR, MVT::i64   , Expand);

  if (!Subtarget.useCRBits()) {
    // PowerPC does not have Select
    setOperationAction(ISD::SELECT, MVT::i32, Expand);
    setOperationAction(ISD::SELECT, MVT::i64, Expand);
    setOperationAction(ISD::SELECT, MVT::f32, Expand);
    setOperationAction(ISD::SELECT, MVT::f64, Expand);
  }

  // PowerPC wants to turn select_cc of FP into fsel when possible.
  setOperationAction(ISD::SELECT_CC, MVT::f32, Custom);
  setOperationAction(ISD::SELECT_CC, MVT::f64, Custom);

  // PowerPC wants to optimize integer setcc a bit
  if (!Subtarget.useCRBits())
    setOperationAction(ISD::SETCC, MVT::i32, Custom);

  // PowerPC does not have BRCOND which requires SetCC
  if (!Subtarget.useCRBits())
    setOperationAction(ISD::BRCOND, MVT::Other, Expand);

  setOperationAction(ISD::BR_JT,  MVT::Other, Expand);

  // PowerPC turns FP_TO_SINT into FCTIWZ and some load/stores.
  setOperationAction(ISD::FP_TO_SINT, MVT::i32, Custom);

  // PowerPC does not have [U|S]INT_TO_FP
  setOperationAction(ISD::SINT_TO_FP, MVT::i32, Expand);
  setOperationAction(ISD::UINT_TO_FP, MVT::i32, Expand);

  setOperationAction(ISD::BITCAST, MVT::f32, Expand);
  setOperationAction(ISD::BITCAST, MVT::i32, Expand);
  setOperationAction(ISD::BITCAST, MVT::i64, Expand);
  setOperationAction(ISD::BITCAST, MVT::f64, Expand);

  // We cannot sextinreg(i1).  Expand to shifts.
  setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::i1, Expand);

  // NOTE: EH_SJLJ_SETJMP/_LONGJMP supported here is NOT intended to support
  // SjLj exception handling but a light-weight setjmp/longjmp replacement to
  // support continuation, user-level threading, and etc.. As a result, no
  // other SjLj exception interfaces are implemented and please don't build
  // your own exception handling based on them.
  // LLVM/Clang supports zero-cost DWARF exception handling.
  setOperationAction(ISD::EH_SJLJ_SETJMP, MVT::i32, Custom);
  setOperationAction(ISD::EH_SJLJ_LONGJMP, MVT::Other, Custom);

  // We want to legalize GlobalAddress and ConstantPool nodes into the
  // appropriate instructions to materialize the address.
  setOperationAction(ISD::GlobalAddress, MVT::i32, Custom);
  setOperationAction(ISD::GlobalTLSAddress, MVT::i32, Custom);
  setOperationAction(ISD::BlockAddress,  MVT::i32, Custom);
  setOperationAction(ISD::ConstantPool,  MVT::i32, Custom);
  setOperationAction(ISD::JumpTable,     MVT::i32, Custom);
  setOperationAction(ISD::GlobalAddress, MVT::i64, Custom);
  setOperationAction(ISD::GlobalTLSAddress, MVT::i64, Custom);
  setOperationAction(ISD::BlockAddress,  MVT::i64, Custom);
  setOperationAction(ISD::ConstantPool,  MVT::i64, Custom);
  setOperationAction(ISD::JumpTable,     MVT::i64, Custom);

  // TRAP is legal.
  setOperationAction(ISD::TRAP, MVT::Other, Legal);

  // TRAMPOLINE is custom lowered.
  setOperationAction(ISD::INIT_TRAMPOLINE, MVT::Other, Custom);
  setOperationAction(ISD::ADJUST_TRAMPOLINE, MVT::Other, Custom);

  // VASTART needs to be custom lowered to use the VarArgsFrameIndex
  setOperationAction(ISD::VASTART           , MVT::Other, Custom);

  if (Subtarget.isSVR4ABI()) {
    if (isPPC64) {
      // VAARG always uses double-word chunks, so promote anything smaller.
      setOperationAction(ISD::VAARG, MVT::i1, Promote);
      AddPromotedToType (ISD::VAARG, MVT::i1, MVT::i64);
      setOperationAction(ISD::VAARG, MVT::i8, Promote);
      AddPromotedToType (ISD::VAARG, MVT::i8, MVT::i64);
      setOperationAction(ISD::VAARG, MVT::i16, Promote);
      AddPromotedToType (ISD::VAARG, MVT::i16, MVT::i64);
      setOperationAction(ISD::VAARG, MVT::i32, Promote);
      AddPromotedToType (ISD::VAARG, MVT::i32, MVT::i64);
      setOperationAction(ISD::VAARG, MVT::Other, Expand);
    } else {
      // VAARG is custom lowered with the 32-bit SVR4 ABI.
      setOperationAction(ISD::VAARG, MVT::Other, Custom);
      setOperationAction(ISD::VAARG, MVT::i64, Custom);
    }
  } else
    setOperationAction(ISD::VAARG, MVT::Other, Expand);

  if (Subtarget.isSVR4ABI() && !isPPC64)
    // VACOPY is custom lowered with the 32-bit SVR4 ABI.
    setOperationAction(ISD::VACOPY            , MVT::Other, Custom);
  else
    setOperationAction(ISD::VACOPY            , MVT::Other, Expand);

  // Use the default implementation.
  setOperationAction(ISD::VAEND             , MVT::Other, Expand);
  setOperationAction(ISD::STACKSAVE         , MVT::Other, Expand);
  setOperationAction(ISD::STACKRESTORE      , MVT::Other, Custom);
  setOperationAction(ISD::DYNAMIC_STACKALLOC, MVT::i32  , Custom);
  setOperationAction(ISD::DYNAMIC_STACKALLOC, MVT::i64  , Custom);

  // We want to custom lower some of our intrinsics.
  setOperationAction(ISD::INTRINSIC_WO_CHAIN, MVT::Other, Custom);

  // To handle counter-based loop conditions.
  setOperationAction(ISD::INTRINSIC_W_CHAIN, MVT::i1, Custom);

  // Comparisons that require checking two conditions.
  setCondCodeAction(ISD::SETULT, MVT::f32, Expand);
  setCondCodeAction(ISD::SETULT, MVT::f64, Expand);
  setCondCodeAction(ISD::SETUGT, MVT::f32, Expand);
  setCondCodeAction(ISD::SETUGT, MVT::f64, Expand);
  setCondCodeAction(ISD::SETUEQ, MVT::f32, Expand);
  setCondCodeAction(ISD::SETUEQ, MVT::f64, Expand);
  setCondCodeAction(ISD::SETOGE, MVT::f32, Expand);
  setCondCodeAction(ISD::SETOGE, MVT::f64, Expand);
  setCondCodeAction(ISD::SETOLE, MVT::f32, Expand);
  setCondCodeAction(ISD::SETOLE, MVT::f64, Expand);
  setCondCodeAction(ISD::SETONE, MVT::f32, Expand);
  setCondCodeAction(ISD::SETONE, MVT::f64, Expand);

  if (Subtarget.has64BitSupport()) {
    // They also have instructions for converting between i64 and fp.
    setOperationAction(ISD::FP_TO_SINT, MVT::i64, Custom);
    setOperationAction(ISD::FP_TO_UINT, MVT::i64, Expand);
    setOperationAction(ISD::SINT_TO_FP, MVT::i64, Custom);
    setOperationAction(ISD::UINT_TO_FP, MVT::i64, Expand);
    // This is just the low 32 bits of a (signed) fp->i64 conversion.
    // We cannot do this with Promote because i64 is not a legal type.
    setOperationAction(ISD::FP_TO_UINT, MVT::i32, Custom);

    if (Subtarget.hasLFIWAX() || Subtarget.isPPC64())
      setOperationAction(ISD::SINT_TO_FP, MVT::i32, Custom);
  } else {
    // PowerPC does not have FP_TO_UINT on 32-bit implementations.
    setOperationAction(ISD::FP_TO_UINT, MVT::i32, Expand);
  }

  // With the instructions enabled under FPCVT, we can do everything.
  if (Subtarget.hasFPCVT()) {
    if (Subtarget.has64BitSupport()) {
      setOperationAction(ISD::FP_TO_SINT, MVT::i64, Custom);
      setOperationAction(ISD::FP_TO_UINT, MVT::i64, Custom);
      setOperationAction(ISD::SINT_TO_FP, MVT::i64, Custom);
      setOperationAction(ISD::UINT_TO_FP, MVT::i64, Custom);
    }

    setOperationAction(ISD::FP_TO_SINT, MVT::i32, Custom);
    setOperationAction(ISD::FP_TO_UINT, MVT::i32, Custom);
    setOperationAction(ISD::SINT_TO_FP, MVT::i32, Custom);
    setOperationAction(ISD::UINT_TO_FP, MVT::i32, Custom);
  }

  if (Subtarget.use64BitRegs()) {
    // 64-bit PowerPC implementations can support i64 types directly
    addRegisterClass(MVT::i64, &PPC::G8RCRegClass);
    // BUILD_PAIR can't be handled natively, and should be expanded to shl/or
    setOperationAction(ISD::BUILD_PAIR, MVT::i64, Expand);
    // 64-bit PowerPC wants to expand i128 shifts itself.
    setOperationAction(ISD::SHL_PARTS, MVT::i64, Custom);
    setOperationAction(ISD::SRA_PARTS, MVT::i64, Custom);
    setOperationAction(ISD::SRL_PARTS, MVT::i64, Custom);
  } else {
    // 32-bit PowerPC wants to expand i64 shifts itself.
    setOperationAction(ISD::SHL_PARTS, MVT::i32, Custom);
    setOperationAction(ISD::SRA_PARTS, MVT::i32, Custom);
    setOperationAction(ISD::SRL_PARTS, MVT::i32, Custom);
  }

  if (Subtarget.hasAltivec()) {
    // First set operation action for all vector types to expand. Then we
    // will selectively turn on ones that can be effectively codegen'd.
    for (unsigned i = (unsigned)MVT::FIRST_VECTOR_VALUETYPE;
         i <= (unsigned)MVT::LAST_VECTOR_VALUETYPE; ++i) {
      MVT::SimpleValueType VT = (MVT::SimpleValueType)i;

      // add/sub are legal for all supported vector VT's.
      setOperationAction(ISD::ADD , VT, Legal);
      setOperationAction(ISD::SUB , VT, Legal);

      // We promote all shuffles to v16i8.
      setOperationAction(ISD::VECTOR_SHUFFLE, VT, Promote);
      AddPromotedToType (ISD::VECTOR_SHUFFLE, VT, MVT::v16i8);

      // We promote all non-typed operations to v4i32.
      setOperationAction(ISD::AND   , VT, Promote);
      AddPromotedToType (ISD::AND   , VT, MVT::v4i32);
      setOperationAction(ISD::OR    , VT, Promote);
      AddPromotedToType (ISD::OR    , VT, MVT::v4i32);
      setOperationAction(ISD::XOR   , VT, Promote);
      AddPromotedToType (ISD::XOR   , VT, MVT::v4i32);
      setOperationAction(ISD::LOAD  , VT, Promote);
      AddPromotedToType (ISD::LOAD  , VT, MVT::v4i32);
      setOperationAction(ISD::SELECT, VT, Promote);
      AddPromotedToType (ISD::SELECT, VT, MVT::v4i32);
      setOperationAction(ISD::STORE, VT, Promote);
      AddPromotedToType (ISD::STORE, VT, MVT::v4i32);

      // No other operations are legal.
      setOperationAction(ISD::MUL , VT, Expand);
      setOperationAction(ISD::SDIV, VT, Expand);
      setOperationAction(ISD::SREM, VT, Expand);
      setOperationAction(ISD::UDIV, VT, Expand);
      setOperationAction(ISD::UREM, VT, Expand);
      setOperationAction(ISD::FDIV, VT, Expand);
      setOperationAction(ISD::FREM, VT, Expand);
      setOperationAction(ISD::FNEG, VT, Expand);
      setOperationAction(ISD::FSQRT, VT, Expand);
      setOperationAction(ISD::FLOG, VT, Expand);
      setOperationAction(ISD::FLOG10, VT, Expand);
      setOperationAction(ISD::FLOG2, VT, Expand);
      setOperationAction(ISD::FEXP, VT, Expand);
      setOperationAction(ISD::FEXP2, VT, Expand);
      setOperationAction(ISD::FSIN, VT, Expand);
      setOperationAction(ISD::FCOS, VT, Expand);
      setOperationAction(ISD::FABS, VT, Expand);
      setOperationAction(ISD::FPOWI, VT, Expand);
      setOperationAction(ISD::FFLOOR, VT, Expand);
      setOperationAction(ISD::FCEIL,  VT, Expand);
      setOperationAction(ISD::FTRUNC, VT, Expand);
      setOperationAction(ISD::FRINT,  VT, Expand);
      setOperationAction(ISD::FNEARBYINT, VT, Expand);
      setOperationAction(ISD::EXTRACT_VECTOR_ELT, VT, Expand);
      setOperationAction(ISD::INSERT_VECTOR_ELT, VT, Expand);
      setOperationAction(ISD::BUILD_VECTOR, VT, Expand);
      setOperationAction(ISD::MULHU, VT, Expand);
      setOperationAction(ISD::MULHS, VT, Expand);
      setOperationAction(ISD::UMUL_LOHI, VT, Expand);
      setOperationAction(ISD::SMUL_LOHI, VT, Expand);
      setOperationAction(ISD::UDIVREM, VT, Expand);
      setOperationAction(ISD::SDIVREM, VT, Expand);
      setOperationAction(ISD::SCALAR_TO_VECTOR, VT, Expand);
      setOperationAction(ISD::FPOW, VT, Expand);
      setOperationAction(ISD::BSWAP, VT, Expand);
      setOperationAction(ISD::CTPOP, VT, Expand);
      setOperationAction(ISD::CTLZ, VT, Expand);
      setOperationAction(ISD::CTLZ_ZERO_UNDEF, VT, Expand);
      setOperationAction(ISD::CTTZ, VT, Expand);
      setOperationAction(ISD::CTTZ_ZERO_UNDEF, VT, Expand);
      setOperationAction(ISD::VSELECT, VT, Expand);
      setOperationAction(ISD::SIGN_EXTEND_INREG, VT, Expand);

      for (unsigned j = (unsigned)MVT::FIRST_VECTOR_VALUETYPE;
           j <= (unsigned)MVT::LAST_VECTOR_VALUETYPE; ++j) {
        MVT::SimpleValueType InnerVT = (MVT::SimpleValueType)j;
        setTruncStoreAction(VT, InnerVT, Expand);
      }
      setLoadExtAction(ISD::SEXTLOAD, VT, Expand);
      setLoadExtAction(ISD::ZEXTLOAD, VT, Expand);
      setLoadExtAction(ISD::EXTLOAD, VT, Expand);
    }

    // We can custom expand all VECTOR_SHUFFLEs to VPERM, others we can handle
    // with merges, splats, etc.
    setOperationAction(ISD::VECTOR_SHUFFLE, MVT::v16i8, Custom);

    setOperationAction(ISD::AND   , MVT::v4i32, Legal);
    setOperationAction(ISD::OR    , MVT::v4i32, Legal);
    setOperationAction(ISD::XOR   , MVT::v4i32, Legal);
    setOperationAction(ISD::LOAD  , MVT::v4i32, Legal);
    setOperationAction(ISD::SELECT, MVT::v4i32,
                       Subtarget.useCRBits() ? Legal : Expand);
    setOperationAction(ISD::STORE , MVT::v4i32, Legal);
    setOperationAction(ISD::FP_TO_SINT, MVT::v4i32, Legal);
    setOperationAction(ISD::FP_TO_UINT, MVT::v4i32, Legal);
    setOperationAction(ISD::SINT_TO_FP, MVT::v4i32, Legal);
    setOperationAction(ISD::UINT_TO_FP, MVT::v4i32, Legal);
    setOperationAction(ISD::FFLOOR, MVT::v4f32, Legal);
    setOperationAction(ISD::FCEIL, MVT::v4f32, Legal);
    setOperationAction(ISD::FTRUNC, MVT::v4f32, Legal);
    setOperationAction(ISD::FNEARBYINT, MVT::v4f32, Legal);

    addRegisterClass(MVT::v4f32, &PPC::VRRCRegClass);
    addRegisterClass(MVT::v4i32, &PPC::VRRCRegClass);
    addRegisterClass(MVT::v8i16, &PPC::VRRCRegClass);
    addRegisterClass(MVT::v16i8, &PPC::VRRCRegClass);

    setOperationAction(ISD::MUL, MVT::v4f32, Legal);
    setOperationAction(ISD::FMA, MVT::v4f32, Legal);

    if (TM.Options.UnsafeFPMath || Subtarget.hasVSX()) {
      setOperationAction(ISD::FDIV, MVT::v4f32, Legal);
      setOperationAction(ISD::FSQRT, MVT::v4f32, Legal);
    }

    setOperationAction(ISD::MUL, MVT::v4i32, Custom);
    setOperationAction(ISD::MUL, MVT::v8i16, Custom);
    setOperationAction(ISD::MUL, MVT::v16i8, Custom);

    setOperationAction(ISD::SCALAR_TO_VECTOR, MVT::v4f32, Custom);
    setOperationAction(ISD::SCALAR_TO_VECTOR, MVT::v4i32, Custom);

    setOperationAction(ISD::BUILD_VECTOR, MVT::v16i8, Custom);
    setOperationAction(ISD::BUILD_VECTOR, MVT::v8i16, Custom);
    setOperationAction(ISD::BUILD_VECTOR, MVT::v4i32, Custom);
    setOperationAction(ISD::BUILD_VECTOR, MVT::v4f32, Custom);

    // Altivec does not contain unordered floating-point compare instructions
    setCondCodeAction(ISD::SETUO, MVT::v4f32, Expand);
    setCondCodeAction(ISD::SETUEQ, MVT::v4f32, Expand);
    setCondCodeAction(ISD::SETO,   MVT::v4f32, Expand);
    setCondCodeAction(ISD::SETONE, MVT::v4f32, Expand);

    if (Subtarget.hasVSX()) {
      setOperationAction(ISD::SCALAR_TO_VECTOR, MVT::v2f64, Legal);
      setOperationAction(ISD::EXTRACT_VECTOR_ELT, MVT::v2f64, Legal);

      setOperationAction(ISD::FFLOOR, MVT::v2f64, Legal);
      setOperationAction(ISD::FCEIL, MVT::v2f64, Legal);
      setOperationAction(ISD::FTRUNC, MVT::v2f64, Legal);
      setOperationAction(ISD::FNEARBYINT, MVT::v2f64, Legal);
      setOperationAction(ISD::FROUND, MVT::v2f64, Legal);

      setOperationAction(ISD::FROUND, MVT::v4f32, Legal);

      setOperationAction(ISD::MUL, MVT::v2f64, Legal);
      setOperationAction(ISD::FMA, MVT::v2f64, Legal);

      setOperationAction(ISD::FDIV, MVT::v2f64, Legal);
      setOperationAction(ISD::FSQRT, MVT::v2f64, Legal);

      setOperationAction(ISD::VSELECT, MVT::v16i8, Legal);
      setOperationAction(ISD::VSELECT, MVT::v8i16, Legal);
      setOperationAction(ISD::VSELECT, MVT::v4i32, Legal);
      setOperationAction(ISD::VSELECT, MVT::v4f32, Legal);
      setOperationAction(ISD::VSELECT, MVT::v2f64, Legal);

      // Share the Altivec comparison restrictions.
      setCondCodeAction(ISD::SETUO, MVT::v2f64, Expand);
      setCondCodeAction(ISD::SETUEQ, MVT::v2f64, Expand);
      setCondCodeAction(ISD::SETO,   MVT::v2f64, Expand);
      setCondCodeAction(ISD::SETONE, MVT::v2f64, Expand);

      setOperationAction(ISD::LOAD, MVT::v2f64, Legal);
      setOperationAction(ISD::STORE, MVT::v2f64, Legal);

      setOperationAction(ISD::VECTOR_SHUFFLE, MVT::v2f64, Legal);

      addRegisterClass(MVT::f64, &PPC::VSFRCRegClass);

      addRegisterClass(MVT::v4f32, &PPC::VSRCRegClass);
      addRegisterClass(MVT::v2f64, &PPC::VSRCRegClass);

      // VSX v2i64 only supports non-arithmetic operations.
      setOperationAction(ISD::ADD, MVT::v2i64, Expand);
      setOperationAction(ISD::SUB, MVT::v2i64, Expand);

      setOperationAction(ISD::SHL, MVT::v2i64, Expand);
      setOperationAction(ISD::SRA, MVT::v2i64, Expand);
      setOperationAction(ISD::SRL, MVT::v2i64, Expand);

      setOperationAction(ISD::SETCC, MVT::v2i64, Custom);

      setOperationAction(ISD::LOAD, MVT::v2i64, Promote);
      AddPromotedToType (ISD::LOAD, MVT::v2i64, MVT::v2f64);
      setOperationAction(ISD::STORE, MVT::v2i64, Promote);
      AddPromotedToType (ISD::STORE, MVT::v2i64, MVT::v2f64);

      setOperationAction(ISD::VECTOR_SHUFFLE, MVT::v2i64, Legal);

      setOperationAction(ISD::SINT_TO_FP, MVT::v2i64, Legal);
      setOperationAction(ISD::UINT_TO_FP, MVT::v2i64, Legal);
      setOperationAction(ISD::FP_TO_SINT, MVT::v2i64, Legal);
      setOperationAction(ISD::FP_TO_UINT, MVT::v2i64, Legal);

      // Vector operation legalization checks the result type of
      // SIGN_EXTEND_INREG, overall legalization checks the inner type.
      setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::v2i64, Legal);
      setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::v2i32, Legal);
      setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::v2i16, Custom);
      setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::v2i8, Custom);

      addRegisterClass(MVT::v2i64, &PPC::VSRCRegClass);
    }
  }

  if (Subtarget.has64BitSupport()) {
    setOperationAction(ISD::PREFETCH, MVT::Other, Legal);
    setOperationAction(ISD::READCYCLECOUNTER, MVT::i64, Legal);
  }

  setOperationAction(ISD::ATOMIC_LOAD,  MVT::i32, Expand);
  setOperationAction(ISD::ATOMIC_STORE, MVT::i32, Expand);
  setOperationAction(ISD::ATOMIC_LOAD,  MVT::i64, Expand);
  setOperationAction(ISD::ATOMIC_STORE, MVT::i64, Expand);

  setBooleanContents(ZeroOrOneBooleanContent);
  // Altivec instructions set fields to all zeros or all ones.
  setBooleanVectorContents(ZeroOrNegativeOneBooleanContent);

  if (!isPPC64) {
    // These libcalls are not available in 32-bit.
    setLibcallName(RTLIB::SHL_I128, nullptr);
    setLibcallName(RTLIB::SRL_I128, nullptr);
    setLibcallName(RTLIB::SRA_I128, nullptr);
  }

  if (isPPC64) {
    setStackPointerRegisterToSaveRestore(PPC::X1);
    setExceptionPointerRegister(PPC::X3);
    setExceptionSelectorRegister(PPC::X4);
  } else {
    setStackPointerRegisterToSaveRestore(PPC::R1);
    setExceptionPointerRegister(PPC::R3);
    setExceptionSelectorRegister(PPC::R4);
  }

  // We have target-specific dag combine patterns for the following nodes:
  setTargetDAGCombine(ISD::SINT_TO_FP);
  setTargetDAGCombine(ISD::LOAD);
  setTargetDAGCombine(ISD::STORE);
  setTargetDAGCombine(ISD::BR_CC);
  if (Subtarget.useCRBits())
    setTargetDAGCombine(ISD::BRCOND);
  setTargetDAGCombine(ISD::BSWAP);
  setTargetDAGCombine(ISD::INTRINSIC_WO_CHAIN);

  setTargetDAGCombine(ISD::SIGN_EXTEND);
  setTargetDAGCombine(ISD::ZERO_EXTEND);
  setTargetDAGCombine(ISD::ANY_EXTEND);

  if (Subtarget.useCRBits()) {
    setTargetDAGCombine(ISD::TRUNCATE);
    setTargetDAGCombine(ISD::SETCC);
    setTargetDAGCombine(ISD::SELECT_CC);
  }

  // Use reciprocal estimates.
  if (TM.Options.UnsafeFPMath) {
    setTargetDAGCombine(ISD::FDIV);
    setTargetDAGCombine(ISD::FSQRT);
  }

  // Darwin long double math library functions have $LDBL128 appended.
  if (Subtarget.isDarwin()) {
    setLibcallName(RTLIB::COS_PPCF128, "cosl$LDBL128");
    setLibcallName(RTLIB::POW_PPCF128, "powl$LDBL128");
    setLibcallName(RTLIB::REM_PPCF128, "fmodl$LDBL128");
    setLibcallName(RTLIB::SIN_PPCF128, "sinl$LDBL128");
    setLibcallName(RTLIB::SQRT_PPCF128, "sqrtl$LDBL128");
    setLibcallName(RTLIB::LOG_PPCF128, "logl$LDBL128");
    setLibcallName(RTLIB::LOG2_PPCF128, "log2l$LDBL128");
    setLibcallName(RTLIB::LOG10_PPCF128, "log10l$LDBL128");
    setLibcallName(RTLIB::EXP_PPCF128, "expl$LDBL128");
    setLibcallName(RTLIB::EXP2_PPCF128, "exp2l$LDBL128");
  }

  // With 32 condition bits, we don't need to sink (and duplicate) compares
  // aggressively in CodeGenPrep.
  if (Subtarget.useCRBits())
    setHasMultipleConditionRegisters();

  setMinFunctionAlignment(2);
  if (Subtarget.isDarwin())
    setPrefFunctionAlignment(4);

  if (isPPC64 && Subtarget.isJITCodeModel())
    // Temporary workaround for the inability of PPC64 JIT to handle jump
    // tables.
    setSupportJumpTables(false);

  setInsertFencesForAtomic(true);

  if (Subtarget.enableMachineScheduler())
    setSchedulingPreference(Sched::Source);
  else
    setSchedulingPreference(Sched::Hybrid);

  computeRegisterProperties();

  // The Freescale cores does better with aggressive inlining of memcpy and
  // friends. Gcc uses same threshold of 128 bytes (= 32 word stores).
  if (Subtarget.getDarwinDirective() == PPC::DIR_E500mc ||
      Subtarget.getDarwinDirective() == PPC::DIR_E5500) {
    MaxStoresPerMemset = 32;
    MaxStoresPerMemsetOptSize = 16;
    MaxStoresPerMemcpy = 32;
    MaxStoresPerMemcpyOptSize = 8;
    MaxStoresPerMemmove = 32;
    MaxStoresPerMemmoveOptSize = 8;

    setPrefFunctionAlignment(4);
  }
}

/// getMaxByValAlign - Helper for getByValTypeAlignment to determine
/// the desired ByVal argument alignment.
static void getMaxByValAlign(Type *Ty, unsigned &MaxAlign,
                             unsigned MaxMaxAlign) {
  if (MaxAlign == MaxMaxAlign)
    return;
  if (VectorType *VTy = dyn_cast<VectorType>(Ty)) {
    if (MaxMaxAlign >= 32 && VTy->getBitWidth() >= 256)
      MaxAlign = 32;
    else if (VTy->getBitWidth() >= 128 && MaxAlign < 16)
      MaxAlign = 16;
  } else if (ArrayType *ATy = dyn_cast<ArrayType>(Ty)) {
    unsigned EltAlign = 0;
    getMaxByValAlign(ATy->getElementType(), EltAlign, MaxMaxAlign);
    if (EltAlign > MaxAlign)
      MaxAlign = EltAlign;
  } else if (StructType *STy = dyn_cast<StructType>(Ty)) {
    for (unsigned i = 0, e = STy->getNumElements(); i != e; ++i) {
      unsigned EltAlign = 0;
      getMaxByValAlign(STy->getElementType(i), EltAlign, MaxMaxAlign);
      if (EltAlign > MaxAlign)
        MaxAlign = EltAlign;
      if (MaxAlign == MaxMaxAlign)
        break;
    }
  }
}

/// getByValTypeAlignment - Return the desired alignment for ByVal aggregate
/// function arguments in the caller parameter area.
unsigned PPCTargetLowering::getByValTypeAlignment(Type *Ty) const {
  // Darwin passes everything on 4 byte boundary.
  if (Subtarget.isDarwin())
    return 4;

  // 16byte and wider vectors are passed on 16byte boundary.
  // The rest is 8 on PPC64 and 4 on PPC32 boundary.
  unsigned Align = Subtarget.isPPC64() ? 8 : 4;
  if (Subtarget.hasAltivec() || Subtarget.hasQPX())
    getMaxByValAlign(Ty, Align, Subtarget.hasQPX() ? 32 : 16);
  return Align;
}

const char *PPCTargetLowering::getTargetNodeName(unsigned Opcode) const {
  switch (Opcode) {
  default: return nullptr;
  case PPCISD::FSEL:            return "PPCISD::FSEL";
  case PPCISD::FCFID:           return "PPCISD::FCFID";
  case PPCISD::FCTIDZ:          return "PPCISD::FCTIDZ";
  case PPCISD::FCTIWZ:          return "PPCISD::FCTIWZ";
  case PPCISD::FRE:             return "PPCISD::FRE";
  case PPCISD::FRSQRTE:         return "PPCISD::FRSQRTE";
  case PPCISD::STFIWX:          return "PPCISD::STFIWX";
  case PPCISD::VMADDFP:         return "PPCISD::VMADDFP";
  case PPCISD::VNMSUBFP:        return "PPCISD::VNMSUBFP";
  case PPCISD::VPERM:           return "PPCISD::VPERM";
  case PPCISD::Hi:              return "PPCISD::Hi";
  case PPCISD::Lo:              return "PPCISD::Lo";
  case PPCISD::TOC_ENTRY:       return "PPCISD::TOC_ENTRY";
  case PPCISD::LOAD:            return "PPCISD::LOAD";
  case PPCISD::LOAD_TOC:        return "PPCISD::LOAD_TOC";
  case PPCISD::DYNALLOC:        return "PPCISD::DYNALLOC";
  case PPCISD::GlobalBaseReg:   return "PPCISD::GlobalBaseReg";
  case PPCISD::SRL:             return "PPCISD::SRL";
  case PPCISD::SRA:             return "PPCISD::SRA";
  case PPCISD::SHL:             return "PPCISD::SHL";
  case PPCISD::CALL:            return "PPCISD::CALL";
  case PPCISD::CALL_NOP:        return "PPCISD::CALL_NOP";
  case PPCISD::MTCTR:           return "PPCISD::MTCTR";
  case PPCISD::BCTRL:           return "PPCISD::BCTRL";
  case PPCISD::RET_FLAG:        return "PPCISD::RET_FLAG";
  case PPCISD::EH_SJLJ_SETJMP:  return "PPCISD::EH_SJLJ_SETJMP";
  case PPCISD::EH_SJLJ_LONGJMP: return "PPCISD::EH_SJLJ_LONGJMP";
  case PPCISD::MFOCRF:          return "PPCISD::MFOCRF";
  case PPCISD::VCMP:            return "PPCISD::VCMP";
  case PPCISD::VCMPo:           return "PPCISD::VCMPo";
  case PPCISD::LBRX:            return "PPCISD::LBRX";
  case PPCISD::STBRX:           return "PPCISD::STBRX";
  case PPCISD::LARX:            return "PPCISD::LARX";
  case PPCISD::STCX:            return "PPCISD::STCX";
  case PPCISD::COND_BRANCH:     return "PPCISD::COND_BRANCH";
  case PPCISD::BDNZ:            return "PPCISD::BDNZ";
  case PPCISD::BDZ:             return "PPCISD::BDZ";
  case PPCISD::MFFS:            return "PPCISD::MFFS";
  case PPCISD::FADDRTZ:         return "PPCISD::FADDRTZ";
  case PPCISD::TC_RETURN:       return "PPCISD::TC_RETURN";
  case PPCISD::CR6SET:          return "PPCISD::CR6SET";
  case PPCISD::CR6UNSET:        return "PPCISD::CR6UNSET";
  case PPCISD::ADDIS_TOC_HA:    return "PPCISD::ADDIS_TOC_HA";
  case PPCISD::LD_TOC_L:        return "PPCISD::LD_TOC_L";
  case PPCISD::ADDI_TOC_L:      return "PPCISD::ADDI_TOC_L";
  case PPCISD::PPC32_GOT:       return "PPCISD::PPC32_GOT";
  case PPCISD::ADDIS_GOT_TPREL_HA: return "PPCISD::ADDIS_GOT_TPREL_HA";
  case PPCISD::LD_GOT_TPREL_L:  return "PPCISD::LD_GOT_TPREL_L";
  case PPCISD::ADD_TLS:         return "PPCISD::ADD_TLS";
  case PPCISD::ADDIS_TLSGD_HA:  return "PPCISD::ADDIS_TLSGD_HA";
  case PPCISD::ADDI_TLSGD_L:    return "PPCISD::ADDI_TLSGD_L";
  case PPCISD::GET_TLS_ADDR:    return "PPCISD::GET_TLS_ADDR";
  case PPCISD::ADDIS_TLSLD_HA:  return "PPCISD::ADDIS_TLSLD_HA";
  case PPCISD::ADDI_TLSLD_L:    return "PPCISD::ADDI_TLSLD_L";
  case PPCISD::GET_TLSLD_ADDR:  return "PPCISD::GET_TLSLD_ADDR";
  case PPCISD::ADDIS_DTPREL_HA: return "PPCISD::ADDIS_DTPREL_HA";
  case PPCISD::ADDI_DTPREL_L:   return "PPCISD::ADDI_DTPREL_L";
  case PPCISD::VADD_SPLAT:      return "PPCISD::VADD_SPLAT";
  case PPCISD::SC:              return "PPCISD::SC";
  }
}

EVT PPCTargetLowering::getSetCCResultType(LLVMContext &, EVT VT) const {
  if (!VT.isVector())
    return Subtarget.useCRBits() ? MVT::i1 : MVT::i32;
  return VT.changeVectorElementTypeToInteger();
}

//===----------------------------------------------------------------------===//
// Node matching predicates, for use by the tblgen matching code.
//===----------------------------------------------------------------------===//

/// isFloatingPointZero - Return true if this is 0.0 or -0.0.
static bool isFloatingPointZero(SDValue Op) {
  if (ConstantFPSDNode *CFP = dyn_cast<ConstantFPSDNode>(Op))
    return CFP->getValueAPF().isZero();
  else if (ISD::isEXTLoad(Op.getNode()) || ISD::isNON_EXTLoad(Op.getNode())) {
    // Maybe this has already been legalized into the constant pool?
    if (ConstantPoolSDNode *CP = dyn_cast<ConstantPoolSDNode>(Op.getOperand(1)))
      if (const ConstantFP *CFP = dyn_cast<ConstantFP>(CP->getConstVal()))
        return CFP->getValueAPF().isZero();
  }
  return false;
}

/// isConstantOrUndef - Op is either an undef node or a ConstantSDNode.  Return
/// true if Op is undef or if it matches the specified value.
static bool isConstantOrUndef(int Op, int Val) {
  return Op < 0 || Op == Val;
}

/// isVPKUHUMShuffleMask - Return true if this is the shuffle mask for a
/// VPKUHUM instruction.
/// The ShuffleKind distinguishes between big-endian operations with
/// two different inputs (0), either-endian operations with two identical
/// inputs (1), and little-endian operantion with two different inputs (2).
/// For the latter, the input operands are swapped (see PPCInstrAltivec.td).
bool PPC::isVPKUHUMShuffleMask(ShuffleVectorSDNode *N, unsigned ShuffleKind,
                               SelectionDAG &DAG) {
  bool IsLE = DAG.getSubtarget().getDataLayout()->isLittleEndian();
  if (ShuffleKind == 0) {
    if (IsLE)
      return false;
    for (unsigned i = 0; i != 16; ++i)
      if (!isConstantOrUndef(N->getMaskElt(i), i*2+1))
        return false;
  } else if (ShuffleKind == 2) {
    if (!IsLE)
      return false;
    for (unsigned i = 0; i != 16; ++i)
      if (!isConstantOrUndef(N->getMaskElt(i), i*2))
        return false;
  } else if (ShuffleKind == 1) {
    unsigned j = IsLE ? 0 : 1;
    for (unsigned i = 0; i != 8; ++i)
      if (!isConstantOrUndef(N->getMaskElt(i),    i*2+j) ||
          !isConstantOrUndef(N->getMaskElt(i+8),  i*2+j))
        return false;
  }
  return true;
}

/// isVPKUWUMShuffleMask - Return true if this is the shuffle mask for a
/// VPKUWUM instruction.
/// The ShuffleKind distinguishes between big-endian operations with
/// two different inputs (0), either-endian operations with two identical
/// inputs (1), and little-endian operantion with two different inputs (2).
/// For the latter, the input operands are swapped (see PPCInstrAltivec.td).
bool PPC::isVPKUWUMShuffleMask(ShuffleVectorSDNode *N, unsigned ShuffleKind,
                               SelectionDAG &DAG) {
  bool IsLE = DAG.getSubtarget().getDataLayout()->isLittleEndian();
  if (ShuffleKind == 0) {
    if (IsLE)
      return false;
    for (unsigned i = 0; i != 16; i += 2)
      if (!isConstantOrUndef(N->getMaskElt(i  ),  i*2+2) ||
          !isConstantOrUndef(N->getMaskElt(i+1),  i*2+3))
        return false;
  } else if (ShuffleKind == 2) {
    if (!IsLE)
      return false;
    for (unsigned i = 0; i != 16; i += 2)
      if (!isConstantOrUndef(N->getMaskElt(i  ),  i*2) ||
          !isConstantOrUndef(N->getMaskElt(i+1),  i*2+1))
        return false;
  } else if (ShuffleKind == 1) {
    unsigned j = IsLE ? 0 : 2;
    for (unsigned i = 0; i != 8; i += 2)
      if (!isConstantOrUndef(N->getMaskElt(i  ),  i*2+j)   ||
          !isConstantOrUndef(N->getMaskElt(i+1),  i*2+j+1) ||
          !isConstantOrUndef(N->getMaskElt(i+8),  i*2+j)   ||
          !isConstantOrUndef(N->getMaskElt(i+9),  i*2+j+1))
        return false;
  }
  return true;
}

/// isVMerge - Common function, used to match vmrg* shuffles.
///
static bool isVMerge(ShuffleVectorSDNode *N, unsigned UnitSize,
                     unsigned LHSStart, unsigned RHSStart) {
  if (N->getValueType(0) != MVT::v16i8)
    return false;
  assert((UnitSize == 1 || UnitSize == 2 || UnitSize == 4) &&
         "Unsupported merge size!");

  for (unsigned i = 0; i != 8/UnitSize; ++i)     // Step over units
    for (unsigned j = 0; j != UnitSize; ++j) {   // Step over bytes within unit
      if (!isConstantOrUndef(N->getMaskElt(i*UnitSize*2+j),
                             LHSStart+j+i*UnitSize) ||
          !isConstantOrUndef(N->getMaskElt(i*UnitSize*2+UnitSize+j),
                             RHSStart+j+i*UnitSize))
        return false;
    }
  return true;
}

/// isVMRGLShuffleMask - Return true if this is a shuffle mask suitable for
/// a VMRGL* instruction with the specified unit size (1,2 or 4 bytes).
/// The ShuffleKind distinguishes between big-endian merges with two 
/// different inputs (0), either-endian merges with two identical inputs (1),
/// and little-endian merges with two different inputs (2).  For the latter,
/// the input operands are swapped (see PPCInstrAltivec.td).
bool PPC::isVMRGLShuffleMask(ShuffleVectorSDNode *N, unsigned UnitSize,
                             unsigned ShuffleKind, SelectionDAG &DAG) {
  if (DAG.getSubtarget().getDataLayout()->isLittleEndian()) {
    if (ShuffleKind == 1) // unary
      return isVMerge(N, UnitSize, 0, 0);
    else if (ShuffleKind == 2) // swapped
      return isVMerge(N, UnitSize, 0, 16);
    else
      return false;
  } else {
    if (ShuffleKind == 1) // unary
      return isVMerge(N, UnitSize, 8, 8);
    else if (ShuffleKind == 0) // normal
      return isVMerge(N, UnitSize, 8, 24);
    else
      return false;
  }
}

/// isVMRGHShuffleMask - Return true if this is a shuffle mask suitable for
/// a VMRGH* instruction with the specified unit size (1,2 or 4 bytes).
/// The ShuffleKind distinguishes between big-endian merges with two 
/// different inputs (0), either-endian merges with two identical inputs (1),
/// and little-endian merges with two different inputs (2).  For the latter,
/// the input operands are swapped (see PPCInstrAltivec.td).
bool PPC::isVMRGHShuffleMask(ShuffleVectorSDNode *N, unsigned UnitSize,
                             unsigned ShuffleKind, SelectionDAG &DAG) {
  if (DAG.getSubtarget().getDataLayout()->isLittleEndian()) {
    if (ShuffleKind == 1) // unary
      return isVMerge(N, UnitSize, 8, 8);
    else if (ShuffleKind == 2) // swapped
      return isVMerge(N, UnitSize, 8, 24);
    else
      return false;
  } else {
    if (ShuffleKind == 1) // unary
      return isVMerge(N, UnitSize, 0, 0);
    else if (ShuffleKind == 0) // normal
      return isVMerge(N, UnitSize, 0, 16);
    else
      return false;
  }
}


/// isVSLDOIShuffleMask - If this is a vsldoi shuffle mask, return the shift
/// amount, otherwise return -1.
/// The ShuffleKind distinguishes between big-endian operations with two 
/// different inputs (0), either-endian operations with two identical inputs
/// (1), and little-endian operations with two different inputs (2).  For the
/// latter, the input operands are swapped (see PPCInstrAltivec.td).
int PPC::isVSLDOIShuffleMask(SDNode *N, unsigned ShuffleKind,
                             SelectionDAG &DAG) {
  if (N->getValueType(0) != MVT::v16i8)
    return -1;

  ShuffleVectorSDNode *SVOp = cast<ShuffleVectorSDNode>(N);

  // Find the first non-undef value in the shuffle mask.
  unsigned i;
  for (i = 0; i != 16 && SVOp->getMaskElt(i) < 0; ++i)
    /*search*/;

  if (i == 16) return -1;  // all undef.

  // Otherwise, check to see if the rest of the elements are consecutively
  // numbered from this value.
  unsigned ShiftAmt = SVOp->getMaskElt(i);
  if (ShiftAmt < i) return -1;

  ShiftAmt -= i;
  bool isLE = DAG.getTarget().getSubtargetImpl()->getDataLayout()->
    isLittleEndian();

  if ((ShuffleKind == 0 && !isLE) || (ShuffleKind == 2 && isLE)) {
    // Check the rest of the elements to see if they are consecutive.
    for (++i; i != 16; ++i)
      if (!isConstantOrUndef(SVOp->getMaskElt(i), ShiftAmt+i))
        return -1;
  } else if (ShuffleKind == 1) {
    // Check the rest of the elements to see if they are consecutive.
    for (++i; i != 16; ++i)
      if (!isConstantOrUndef(SVOp->getMaskElt(i), (ShiftAmt+i) & 15))
        return -1;
  } else
    return -1;

  if (ShuffleKind == 2 && isLE)
    ShiftAmt = 16 - ShiftAmt;

  return ShiftAmt;
}

/// isSplatShuffleMask - Return true if the specified VECTOR_SHUFFLE operand
/// specifies a splat of a single element that is suitable for input to
/// VSPLTB/VSPLTH/VSPLTW.
bool PPC::isSplatShuffleMask(ShuffleVectorSDNode *N, unsigned EltSize) {
  assert(N->getValueType(0) == MVT::v16i8 &&
         (EltSize == 1 || EltSize == 2 || EltSize == 4));

  // This is a splat operation if each element of the permute is the same, and
  // if the value doesn't reference the second vector.
  unsigned ElementBase = N->getMaskElt(0);

  // FIXME: Handle UNDEF elements too!
  if (ElementBase >= 16)
    return false;

  // Check that the indices are consecutive, in the case of a multi-byte element
  // splatted with a v16i8 mask.
  for (unsigned i = 1; i != EltSize; ++i)
    if (N->getMaskElt(i) < 0 || N->getMaskElt(i) != (int)(i+ElementBase))
      return false;

  for (unsigned i = EltSize, e = 16; i != e; i += EltSize) {
    if (N->getMaskElt(i) < 0) continue;
    for (unsigned j = 0; j != EltSize; ++j)
      if (N->getMaskElt(i+j) != N->getMaskElt(j))
        return false;
  }
  return true;
}

/// isAllNegativeZeroVector - Returns true if all elements of build_vector
/// are -0.0.
bool PPC::isAllNegativeZeroVector(SDNode *N) {
  BuildVectorSDNode *BV = cast<BuildVectorSDNode>(N);

  APInt APVal, APUndef;
  unsigned BitSize;
  bool HasAnyUndefs;

  if (BV->isConstantSplat(APVal, APUndef, BitSize, HasAnyUndefs, 32, true))
    if (ConstantFPSDNode *CFP = dyn_cast<ConstantFPSDNode>(N->getOperand(0)))
      return CFP->getValueAPF().isNegZero();

  return false;
}

/// getVSPLTImmediate - Return the appropriate VSPLT* immediate to splat the
/// specified isSplatShuffleMask VECTOR_SHUFFLE mask.
unsigned PPC::getVSPLTImmediate(SDNode *N, unsigned EltSize,
                                SelectionDAG &DAG) {
  ShuffleVectorSDNode *SVOp = cast<ShuffleVectorSDNode>(N);
  assert(isSplatShuffleMask(SVOp, EltSize));
  if (DAG.getSubtarget().getDataLayout()->isLittleEndian())
    return (16 / EltSize) - 1 - (SVOp->getMaskElt(0) / EltSize);
  else
    return SVOp->getMaskElt(0) / EltSize;
}

/// get_VSPLTI_elt - If this is a build_vector of constants which can be formed
/// by using a vspltis[bhw] instruction of the specified element size, return
/// the constant being splatted.  The ByteSize field indicates the number of
/// bytes of each element [124] -> [bhw].
SDValue PPC::get_VSPLTI_elt(SDNode *N, unsigned ByteSize, SelectionDAG &DAG) {
  SDValue OpVal(nullptr, 0);

  // If ByteSize of the splat is bigger than the element size of the
  // build_vector, then we have a case where we are checking for a splat where
  // multiple elements of the buildvector are folded together into a single
  // logical element of the splat (e.g. "vsplish 1" to splat {0,1}*8).
  unsigned EltSize = 16/N->getNumOperands();
  if (EltSize < ByteSize) {
    unsigned Multiple = ByteSize/EltSize;   // Number of BV entries per spltval.
    SDValue UniquedVals[4];
    assert(Multiple > 1 && Multiple <= 4 && "How can this happen?");

    // See if all of the elements in the buildvector agree across.
    for (unsigned i = 0, e = N->getNumOperands(); i != e; ++i) {
      if (N->getOperand(i).getOpcode() == ISD::UNDEF) continue;
      // If the element isn't a constant, bail fully out.
      if (!isa<ConstantSDNode>(N->getOperand(i))) return SDValue();


      if (!UniquedVals[i&(Multiple-1)].getNode())
        UniquedVals[i&(Multiple-1)] = N->getOperand(i);
      else if (UniquedVals[i&(Multiple-1)] != N->getOperand(i))
        return SDValue();  // no match.
    }

    // Okay, if we reached this point, UniquedVals[0..Multiple-1] contains
    // either constant or undef values that are identical for each chunk.  See
    // if these chunks can form into a larger vspltis*.

    // Check to see if all of the leading entries are either 0 or -1.  If
    // neither, then this won't fit into the immediate field.
    bool LeadingZero = true;
    bool LeadingOnes = true;
    for (unsigned i = 0; i != Multiple-1; ++i) {
      if (!UniquedVals[i].getNode()) continue;  // Must have been undefs.

      LeadingZero &= cast<ConstantSDNode>(UniquedVals[i])->isNullValue();
      LeadingOnes &= cast<ConstantSDNode>(UniquedVals[i])->isAllOnesValue();
    }
    // Finally, check the least significant entry.
    if (LeadingZero) {
      if (!UniquedVals[Multiple-1].getNode())
        return DAG.getTargetConstant(0, MVT::i32);  // 0,0,0,undef
      int Val = cast<ConstantSDNode>(UniquedVals[Multiple-1])->getZExtValue();
      if (Val < 16)
        return DAG.getTargetConstant(Val, MVT::i32);  // 0,0,0,4 -> vspltisw(4)
    }
    if (LeadingOnes) {
      if (!UniquedVals[Multiple-1].getNode())
        return DAG.getTargetConstant(~0U, MVT::i32);  // -1,-1,-1,undef
      int Val =cast<ConstantSDNode>(UniquedVals[Multiple-1])->getSExtValue();
      if (Val >= -16)                            // -1,-1,-1,-2 -> vspltisw(-2)
        return DAG.getTargetConstant(Val, MVT::i32);
    }

    return SDValue();
  }

  // Check to see if this buildvec has a single non-undef value in its elements.
  for (unsigned i = 0, e = N->getNumOperands(); i != e; ++i) {
    if (N->getOperand(i).getOpcode() == ISD::UNDEF) continue;
    if (!OpVal.getNode())
      OpVal = N->getOperand(i);
    else if (OpVal != N->getOperand(i))
      return SDValue();
  }

  if (!OpVal.getNode()) return SDValue();  // All UNDEF: use implicit def.

  unsigned ValSizeInBytes = EltSize;
  uint64_t Value = 0;
  if (ConstantSDNode *CN = dyn_cast<ConstantSDNode>(OpVal)) {
    Value = CN->getZExtValue();
  } else if (ConstantFPSDNode *CN = dyn_cast<ConstantFPSDNode>(OpVal)) {
    assert(CN->getValueType(0) == MVT::f32 && "Only one legal FP vector type!");
    Value = FloatToBits(CN->getValueAPF().convertToFloat());
  }

  // If the splat value is larger than the element value, then we can never do
  // this splat.  The only case that we could fit the replicated bits into our
  // immediate field for would be zero, and we prefer to use vxor for it.
  if (ValSizeInBytes < ByteSize) return SDValue();

  // If the element value is larger than the splat value, cut it in half and
  // check to see if the two halves are equal.  Continue doing this until we
  // get to ByteSize.  This allows us to handle 0x01010101 as 0x01.
  while (ValSizeInBytes > ByteSize) {
    ValSizeInBytes >>= 1;

    // If the top half equals the bottom half, we're still ok.
    if (((Value >> (ValSizeInBytes*8)) & ((1 << (8*ValSizeInBytes))-1)) !=
         (Value                        & ((1 << (8*ValSizeInBytes))-1)))
      return SDValue();
  }

  // Properly sign extend the value.
  int MaskVal = SignExtend32(Value, ByteSize * 8);

  // If this is zero, don't match, zero matches ISD::isBuildVectorAllZeros.
  if (MaskVal == 0) return SDValue();

  // Finally, if this value fits in a 5 bit sext field, return it
  if (SignExtend32<5>(MaskVal) == MaskVal)
    return DAG.getTargetConstant(MaskVal, MVT::i32);
  return SDValue();
}

//===----------------------------------------------------------------------===//
//  Addressing Mode Selection
//===----------------------------------------------------------------------===//

/// isIntS16Immediate - This method tests to see if the node is either a 32-bit
/// or 64-bit immediate, and if the value can be accurately represented as a
/// sign extension from a 16-bit value.  If so, this returns true and the
/// immediate.
static bool isIntS16Immediate(SDNode *N, short &Imm) {
  if (!isa<ConstantSDNode>(N))
    return false;

  Imm = (short)cast<ConstantSDNode>(N)->getZExtValue();
  if (N->getValueType(0) == MVT::i32)
    return Imm == (int32_t)cast<ConstantSDNode>(N)->getZExtValue();
  else
    return Imm == (int64_t)cast<ConstantSDNode>(N)->getZExtValue();
}
static bool isIntS16Immediate(SDValue Op, short &Imm) {
  return isIntS16Immediate(Op.getNode(), Imm);
}


/// SelectAddressRegReg - Given the specified addressed, check to see if it
/// can be represented as an indexed [r+r] operation.  Returns false if it
/// can be more efficiently represented with [r+imm].
bool PPCTargetLowering::SelectAddressRegReg(SDValue N, SDValue &Base,
                                            SDValue &Index,
                                            SelectionDAG &DAG) const {
  short imm = 0;
  if (N.getOpcode() == ISD::ADD) {
    if (isIntS16Immediate(N.getOperand(1), imm))
      return false;    // r+i
    if (N.getOperand(1).getOpcode() == PPCISD::Lo)
      return false;    // r+i

    Base = N.getOperand(0);
    Index = N.getOperand(1);
    return true;
  } else if (N.getOpcode() == ISD::OR) {
    if (isIntS16Immediate(N.getOperand(1), imm))
      return false;    // r+i can fold it if we can.

    // If this is an or of disjoint bitfields, we can codegen this as an add
    // (for better address arithmetic) if the LHS and RHS of the OR are provably
    // disjoint.
    APInt LHSKnownZero, LHSKnownOne;
    APInt RHSKnownZero, RHSKnownOne;
    DAG.computeKnownBits(N.getOperand(0),
                         LHSKnownZero, LHSKnownOne);

    if (LHSKnownZero.getBoolValue()) {
      DAG.computeKnownBits(N.getOperand(1),
                           RHSKnownZero, RHSKnownOne);
      // If all of the bits are known zero on the LHS or RHS, the add won't
      // carry.
      if (~(LHSKnownZero | RHSKnownZero) == 0) {
        Base = N.getOperand(0);
        Index = N.getOperand(1);
        return true;
      }
    }
  }

  return false;
}

// If we happen to be doing an i64 load or store into a stack slot that has
// less than a 4-byte alignment, then the frame-index elimination may need to
// use an indexed load or store instruction (because the offset may not be a
// multiple of 4). The extra register needed to hold the offset comes from the
// register scavenger, and it is possible that the scavenger will need to use
// an emergency spill slot. As a result, we need to make sure that a spill slot
// is allocated when doing an i64 load/store into a less-than-4-byte-aligned
// stack slot.
static void fixupFuncForFI(SelectionDAG &DAG, int FrameIdx, EVT VT) {
  // FIXME: This does not handle the LWA case.
  if (VT != MVT::i64)
    return;

  // NOTE: We'll exclude negative FIs here, which come from argument
  // lowering, because there are no known test cases triggering this problem
  // using packed structures (or similar). We can remove this exclusion if
  // we find such a test case. The reason why this is so test-case driven is
  // because this entire 'fixup' is only to prevent crashes (from the
  // register scavenger) on not-really-valid inputs. For example, if we have:
  //   %a = alloca i1
  //   %b = bitcast i1* %a to i64*
  //   store i64* a, i64 b
  // then the store should really be marked as 'align 1', but is not. If it
  // were marked as 'align 1' then the indexed form would have been
  // instruction-selected initially, and the problem this 'fixup' is preventing
  // won't happen regardless.
  if (FrameIdx < 0)
    return;

  MachineFunction &MF = DAG.getMachineFunction();
  MachineFrameInfo *MFI = MF.getFrameInfo();

  unsigned Align = MFI->getObjectAlignment(FrameIdx);
  if (Align >= 4)
    return;

  PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>();
  FuncInfo->setHasNonRISpills();
}

/// Returns true if the address N can be represented by a base register plus
/// a signed 16-bit displacement [r+imm], and if it is not better
/// represented as reg+reg.  If Aligned is true, only accept displacements
/// suitable for STD and friends, i.e. multiples of 4.
bool PPCTargetLowering::SelectAddressRegImm(SDValue N, SDValue &Disp,
                                            SDValue &Base,
                                            SelectionDAG &DAG,
                                            bool Aligned) const {
  // FIXME dl should come from parent load or store, not from address
  SDLoc dl(N);
  // If this can be more profitably realized as r+r, fail.
  if (SelectAddressRegReg(N, Disp, Base, DAG))
    return false;

  if (N.getOpcode() == ISD::ADD) {
    short imm = 0;
    if (isIntS16Immediate(N.getOperand(1), imm) &&
        (!Aligned || (imm & 3) == 0)) {
      Disp = DAG.getTargetConstant(imm, N.getValueType());
      if (FrameIndexSDNode *FI = dyn_cast<FrameIndexSDNode>(N.getOperand(0))) {
        Base = DAG.getTargetFrameIndex(FI->getIndex(), N.getValueType());
        fixupFuncForFI(DAG, FI->getIndex(), N.getValueType());
      } else {
        Base = N.getOperand(0);
      }
      return true; // [r+i]
    } else if (N.getOperand(1).getOpcode() == PPCISD::Lo) {
      // Match LOAD (ADD (X, Lo(G))).
      assert(!cast<ConstantSDNode>(N.getOperand(1).getOperand(1))->getZExtValue()
             && "Cannot handle constant offsets yet!");
      Disp = N.getOperand(1).getOperand(0);  // The global address.
      assert(Disp.getOpcode() == ISD::TargetGlobalAddress ||
             Disp.getOpcode() == ISD::TargetGlobalTLSAddress ||
             Disp.getOpcode() == ISD::TargetConstantPool ||
             Disp.getOpcode() == ISD::TargetJumpTable);
      Base = N.getOperand(0);
      return true;  // [&g+r]
    }
  } else if (N.getOpcode() == ISD::OR) {
    short imm = 0;
    if (isIntS16Immediate(N.getOperand(1), imm) &&
        (!Aligned || (imm & 3) == 0)) {
      // If this is an or of disjoint bitfields, we can codegen this as an add
      // (for better address arithmetic) if the LHS and RHS of the OR are
      // provably disjoint.
      APInt LHSKnownZero, LHSKnownOne;
      DAG.computeKnownBits(N.getOperand(0), LHSKnownZero, LHSKnownOne);

      if ((LHSKnownZero.getZExtValue()|~(uint64_t)imm) == ~0ULL) {
        // If all of the bits are known zero on the LHS or RHS, the add won't
        // carry.
        if (FrameIndexSDNode *FI =
              dyn_cast<FrameIndexSDNode>(N.getOperand(0))) {
          Base = DAG.getTargetFrameIndex(FI->getIndex(), N.getValueType());
          fixupFuncForFI(DAG, FI->getIndex(), N.getValueType());
        } else {
          Base = N.getOperand(0);
        }
        Disp = DAG.getTargetConstant(imm, N.getValueType());
        return true;
      }
    }
  } else if (ConstantSDNode *CN = dyn_cast<ConstantSDNode>(N)) {
    // Loading from a constant address.

    // If this address fits entirely in a 16-bit sext immediate field, codegen
    // this as "d, 0"
    short Imm;
    if (isIntS16Immediate(CN, Imm) && (!Aligned || (Imm & 3) == 0)) {
      Disp = DAG.getTargetConstant(Imm, CN->getValueType(0));
      Base = DAG.getRegister(Subtarget.isPPC64() ? PPC::ZERO8 : PPC::ZERO,
                             CN->getValueType(0));
      return true;
    }

    // Handle 32-bit sext immediates with LIS + addr mode.
    if ((CN->getValueType(0) == MVT::i32 ||
         (int64_t)CN->getZExtValue() == (int)CN->getZExtValue()) &&
        (!Aligned || (CN->getZExtValue() & 3) == 0)) {
      int Addr = (int)CN->getZExtValue();

      // Otherwise, break this down into an LIS + disp.
      Disp = DAG.getTargetConstant((short)Addr, MVT::i32);

      Base = DAG.getTargetConstant((Addr - (signed short)Addr) >> 16, MVT::i32);
      unsigned Opc = CN->getValueType(0) == MVT::i32 ? PPC::LIS : PPC::LIS8;
      Base = SDValue(DAG.getMachineNode(Opc, dl, CN->getValueType(0), Base), 0);
      return true;
    }
  }

  Disp = DAG.getTargetConstant(0, getPointerTy());
  if (FrameIndexSDNode *FI = dyn_cast<FrameIndexSDNode>(N)) {
    Base = DAG.getTargetFrameIndex(FI->getIndex(), N.getValueType());
    fixupFuncForFI(DAG, FI->getIndex(), N.getValueType());
  } else
    Base = N;
  return true;      // [r+0]
}

/// SelectAddressRegRegOnly - Given the specified addressed, force it to be
/// represented as an indexed [r+r] operation.
bool PPCTargetLowering::SelectAddressRegRegOnly(SDValue N, SDValue &Base,
                                                SDValue &Index,
                                                SelectionDAG &DAG) const {
  // Check to see if we can easily represent this as an [r+r] address.  This
  // will fail if it thinks that the address is more profitably represented as
  // reg+imm, e.g. where imm = 0.
  if (SelectAddressRegReg(N, Base, Index, DAG))
    return true;

  // If the operand is an addition, always emit this as [r+r], since this is
  // better (for code size, and execution, as the memop does the add for free)
  // than emitting an explicit add.
  if (N.getOpcode() == ISD::ADD) {
    Base = N.getOperand(0);
    Index = N.getOperand(1);
    return true;
  }

  // Otherwise, do it the hard way, using R0 as the base register.
  Base = DAG.getRegister(Subtarget.isPPC64() ? PPC::ZERO8 : PPC::ZERO,
                         N.getValueType());
  Index = N;
  return true;
}

/// getPreIndexedAddressParts - returns true by value, base pointer and
/// offset pointer and addressing mode by reference if the node's address
/// can be legally represented as pre-indexed load / store address.
bool PPCTargetLowering::getPreIndexedAddressParts(SDNode *N, SDValue &Base,
                                                  SDValue &Offset,
                                                  ISD::MemIndexedMode &AM,
                                                  SelectionDAG &DAG) const {
  if (DisablePPCPreinc) return false;

  bool isLoad = true;
  SDValue Ptr;
  EVT VT;
  unsigned Alignment;
  if (LoadSDNode *LD = dyn_cast<LoadSDNode>(N)) {
    Ptr = LD->getBasePtr();
    VT = LD->getMemoryVT();
    Alignment = LD->getAlignment();
  } else if (StoreSDNode *ST = dyn_cast<StoreSDNode>(N)) {
    Ptr = ST->getBasePtr();
    VT  = ST->getMemoryVT();
    Alignment = ST->getAlignment();
    isLoad = false;
  } else
    return false;

  // PowerPC doesn't have preinc load/store instructions for vectors.
  if (VT.isVector())
    return false;

  if (SelectAddressRegReg(Ptr, Base, Offset, DAG)) {

    // Common code will reject creating a pre-inc form if the base pointer
    // is a frame index, or if N is a store and the base pointer is either
    // the same as or a predecessor of the value being stored.  Check for
    // those situations here, and try with swapped Base/Offset instead.
    bool Swap = false;

    if (isa<FrameIndexSDNode>(Base) || isa<RegisterSDNode>(Base))
      Swap = true;
    else if (!isLoad) {
      SDValue Val = cast<StoreSDNode>(N)->getValue();
      if (Val == Base || Base.getNode()->isPredecessorOf(Val.getNode()))
        Swap = true;
    }

    if (Swap)
      std::swap(Base, Offset);

    AM = ISD::PRE_INC;
    return true;
  }

  // LDU/STU can only handle immediates that are a multiple of 4.
  if (VT != MVT::i64) {
    if (!SelectAddressRegImm(Ptr, Offset, Base, DAG, false))
      return false;
  } else {
    // LDU/STU need an address with at least 4-byte alignment.
    if (Alignment < 4)
      return false;

    if (!SelectAddressRegImm(Ptr, Offset, Base, DAG, true))
      return false;
  }

  if (LoadSDNode *LD = dyn_cast<LoadSDNode>(N)) {
    // PPC64 doesn't have lwau, but it does have lwaux.  Reject preinc load of
    // sext i32 to i64 when addr mode is r+i.
    if (LD->getValueType(0) == MVT::i64 && LD->getMemoryVT() == MVT::i32 &&
        LD->getExtensionType() == ISD::SEXTLOAD &&
        isa<ConstantSDNode>(Offset))
      return false;
  }

  AM = ISD::PRE_INC;
  return true;
}

//===----------------------------------------------------------------------===//
//  LowerOperation implementation
//===----------------------------------------------------------------------===//

/// GetLabelAccessInfo - Return true if we should reference labels using a
/// PICBase, set the HiOpFlags and LoOpFlags to the target MO flags.
static bool GetLabelAccessInfo(const TargetMachine &TM, unsigned &HiOpFlags,
                               unsigned &LoOpFlags,
                               const GlobalValue *GV = nullptr) {
  HiOpFlags = PPCII::MO_HA;
  LoOpFlags = PPCII::MO_LO;

  // Don't use the pic base if not in PIC relocation model.
  bool isPIC = TM.getRelocationModel() == Reloc::PIC_;

  if (isPIC) {
    HiOpFlags |= PPCII::MO_PIC_FLAG;
    LoOpFlags |= PPCII::MO_PIC_FLAG;
  }

  // If this is a reference to a global value that requires a non-lazy-ptr, make
  // sure that instruction lowering adds it.
  if (GV && TM.getSubtarget<PPCSubtarget>().hasLazyResolverStub(GV, TM)) {
    HiOpFlags |= PPCII::MO_NLP_FLAG;
    LoOpFlags |= PPCII::MO_NLP_FLAG;

    if (GV->hasHiddenVisibility()) {
      HiOpFlags |= PPCII::MO_NLP_HIDDEN_FLAG;
      LoOpFlags |= PPCII::MO_NLP_HIDDEN_FLAG;
    }
  }

  return isPIC;
}

static SDValue LowerLabelRef(SDValue HiPart, SDValue LoPart, bool isPIC,
                             SelectionDAG &DAG) {
  EVT PtrVT = HiPart.getValueType();
  SDValue Zero = DAG.getConstant(0, PtrVT);
  SDLoc DL(HiPart);

  SDValue Hi = DAG.getNode(PPCISD::Hi, DL, PtrVT, HiPart, Zero);
  SDValue Lo = DAG.getNode(PPCISD::Lo, DL, PtrVT, LoPart, Zero);

  // With PIC, the first instruction is actually "GR+hi(&G)".
  if (isPIC)
    Hi = DAG.getNode(ISD::ADD, DL, PtrVT,
                     DAG.getNode(PPCISD::GlobalBaseReg, DL, PtrVT), Hi);

  // Generate non-pic code that has direct accesses to the constant pool.
  // The address of the global is just (hi(&g)+lo(&g)).
  return DAG.getNode(ISD::ADD, DL, PtrVT, Hi, Lo);
}

SDValue PPCTargetLowering::LowerConstantPool(SDValue Op,
                                             SelectionDAG &DAG) const {
  EVT PtrVT = Op.getValueType();
  ConstantPoolSDNode *CP = cast<ConstantPoolSDNode>(Op);
  const Constant *C = CP->getConstVal();

  // 64-bit SVR4 ABI code is always position-independent.
  // The actual address of the GlobalValue is stored in the TOC.
  if (Subtarget.isSVR4ABI() && Subtarget.isPPC64()) {
    SDValue GA = DAG.getTargetConstantPool(C, PtrVT, CP->getAlignment(), 0);
    return DAG.getNode(PPCISD::TOC_ENTRY, SDLoc(CP), MVT::i64, GA,
                       DAG.getRegister(PPC::X2, MVT::i64));
  }

  unsigned MOHiFlag, MOLoFlag;
  bool isPIC = GetLabelAccessInfo(DAG.getTarget(), MOHiFlag, MOLoFlag);

  if (isPIC && Subtarget.isSVR4ABI()) {
    SDValue GA = DAG.getTargetConstantPool(C, PtrVT, CP->getAlignment(),
                                           PPCII::MO_PIC_FLAG);
    SDLoc DL(CP);
    return DAG.getNode(PPCISD::TOC_ENTRY, DL, MVT::i32, GA,
                       DAG.getNode(PPCISD::GlobalBaseReg, DL, PtrVT));
  }

  SDValue CPIHi =
    DAG.getTargetConstantPool(C, PtrVT, CP->getAlignment(), 0, MOHiFlag);
  SDValue CPILo =
    DAG.getTargetConstantPool(C, PtrVT, CP->getAlignment(), 0, MOLoFlag);
  return LowerLabelRef(CPIHi, CPILo, isPIC, DAG);
}

SDValue PPCTargetLowering::LowerJumpTable(SDValue Op, SelectionDAG &DAG) const {
  EVT PtrVT = Op.getValueType();
  JumpTableSDNode *JT = cast<JumpTableSDNode>(Op);

  // 64-bit SVR4 ABI code is always position-independent.
  // The actual address of the GlobalValue is stored in the TOC.
  if (Subtarget.isSVR4ABI() && Subtarget.isPPC64()) {
    SDValue GA = DAG.getTargetJumpTable(JT->getIndex(), PtrVT);
    return DAG.getNode(PPCISD::TOC_ENTRY, SDLoc(JT), MVT::i64, GA,
                       DAG.getRegister(PPC::X2, MVT::i64));
  }

  unsigned MOHiFlag, MOLoFlag;
  bool isPIC = GetLabelAccessInfo(DAG.getTarget(), MOHiFlag, MOLoFlag);

  if (isPIC && Subtarget.isSVR4ABI()) {
    SDValue GA = DAG.getTargetJumpTable(JT->getIndex(), PtrVT,
                                        PPCII::MO_PIC_FLAG);
    SDLoc DL(GA);
    return DAG.getNode(PPCISD::TOC_ENTRY, SDLoc(JT), PtrVT, GA,
                       DAG.getNode(PPCISD::GlobalBaseReg, DL, PtrVT));
  }

  SDValue JTIHi = DAG.getTargetJumpTable(JT->getIndex(), PtrVT, MOHiFlag);
  SDValue JTILo = DAG.getTargetJumpTable(JT->getIndex(), PtrVT, MOLoFlag);
  return LowerLabelRef(JTIHi, JTILo, isPIC, DAG);
}

SDValue PPCTargetLowering::LowerBlockAddress(SDValue Op,
                                             SelectionDAG &DAG) const {
  EVT PtrVT = Op.getValueType();

  const BlockAddress *BA = cast<BlockAddressSDNode>(Op)->getBlockAddress();

  unsigned MOHiFlag, MOLoFlag;
  bool isPIC = GetLabelAccessInfo(DAG.getTarget(), MOHiFlag, MOLoFlag);
  SDValue TgtBAHi = DAG.getTargetBlockAddress(BA, PtrVT, 0, MOHiFlag);
  SDValue TgtBALo = DAG.getTargetBlockAddress(BA, PtrVT, 0, MOLoFlag);
  return LowerLabelRef(TgtBAHi, TgtBALo, isPIC, DAG);
}

SDValue PPCTargetLowering::LowerGlobalTLSAddress(SDValue Op,
                                              SelectionDAG &DAG) const {

  // FIXME: TLS addresses currently use medium model code sequences,
  // which is the most useful form.  Eventually support for small and
  // large models could be added if users need it, at the cost of
  // additional complexity.
  GlobalAddressSDNode *GA = cast<GlobalAddressSDNode>(Op);
  SDLoc dl(GA);
  const GlobalValue *GV = GA->getGlobal();
  EVT PtrVT = getPointerTy();
  bool is64bit = Subtarget.isPPC64();

  TLSModel::Model Model = getTargetMachine().getTLSModel(GV);

  if (Model == TLSModel::LocalExec) {
    SDValue TGAHi = DAG.getTargetGlobalAddress(GV, dl, PtrVT, 0,
                                               PPCII::MO_TPREL_HA);
    SDValue TGALo = DAG.getTargetGlobalAddress(GV, dl, PtrVT, 0,
                                               PPCII::MO_TPREL_LO);
    SDValue TLSReg = DAG.getRegister(is64bit ? PPC::X13 : PPC::R2,
                                     is64bit ? MVT::i64 : MVT::i32);
    SDValue Hi = DAG.getNode(PPCISD::Hi, dl, PtrVT, TGAHi, TLSReg);
    return DAG.getNode(PPCISD::Lo, dl, PtrVT, TGALo, Hi);
  }

  if (Model == TLSModel::InitialExec) {
    SDValue TGA = DAG.getTargetGlobalAddress(GV, dl, PtrVT, 0, 0);
    SDValue TGATLS = DAG.getTargetGlobalAddress(GV, dl, PtrVT, 0,
                                                PPCII::MO_TLS);
    SDValue GOTPtr;
    if (is64bit) {
      SDValue GOTReg = DAG.getRegister(PPC::X2, MVT::i64);
      GOTPtr = DAG.getNode(PPCISD::ADDIS_GOT_TPREL_HA, dl,
                           PtrVT, GOTReg, TGA);
    } else
      GOTPtr = DAG.getNode(PPCISD::PPC32_GOT, dl, PtrVT);
    SDValue TPOffset = DAG.getNode(PPCISD::LD_GOT_TPREL_L, dl,
                                   PtrVT, TGA, GOTPtr);
    return DAG.getNode(PPCISD::ADD_TLS, dl, PtrVT, TPOffset, TGATLS);
  }

  if (Model == TLSModel::GeneralDynamic) {
    SDValue TGA = DAG.getTargetGlobalAddress(GV, dl, PtrVT, 0, 0);
    SDValue GOTPtr;
    if (is64bit) {
      SDValue GOTReg = DAG.getRegister(PPC::X2, MVT::i64);
      GOTPtr = DAG.getNode(PPCISD::ADDIS_TLSGD_HA, dl, PtrVT,
                                   GOTReg, TGA);
    } else {
      GOTPtr = DAG.getNode(PPCISD::PPC32_PICGOT, dl, PtrVT);
    }
    SDValue GOTEntry = DAG.getNode(PPCISD::ADDI_TLSGD_L, dl, PtrVT,
                                   GOTPtr, TGA);

    // We need a chain node, and don't have one handy.  The underlying
    // call has no side effects, so using the function entry node
    // suffices.
    SDValue Chain = DAG.getEntryNode();
    Chain = DAG.getCopyToReg(Chain, dl,
                             is64bit ? PPC::X3 : PPC::R3, GOTEntry);
    SDValue ParmReg = DAG.getRegister(is64bit ? PPC::X3 : PPC::R3,
                                      is64bit ? MVT::i64 : MVT::i32);
    SDValue TLSAddr = DAG.getNode(PPCISD::GET_TLS_ADDR, dl,
                                  PtrVT, ParmReg, TGA);
    // The return value from GET_TLS_ADDR really is in X3 already, but
    // some hacks are needed here to tie everything together.  The extra
    // copies dissolve during subsequent transforms.
    Chain = DAG.getCopyToReg(Chain, dl, is64bit ? PPC::X3 : PPC::R3, TLSAddr);
    return DAG.getCopyFromReg(Chain, dl, is64bit ? PPC::X3 : PPC::R3, PtrVT);
  }

  if (Model == TLSModel::LocalDynamic) {
    SDValue TGA = DAG.getTargetGlobalAddress(GV, dl, PtrVT, 0, 0);
    SDValue GOTPtr;
    if (is64bit) {
      SDValue GOTReg = DAG.getRegister(PPC::X2, MVT::i64);
      GOTPtr = DAG.getNode(PPCISD::ADDIS_TLSLD_HA, dl, PtrVT,
                           GOTReg, TGA);
    } else {
      GOTPtr = DAG.getNode(PPCISD::PPC32_PICGOT, dl, PtrVT);
    }
    SDValue GOTEntry = DAG.getNode(PPCISD::ADDI_TLSLD_L, dl, PtrVT,
                                   GOTPtr, TGA);

    // We need a chain node, and don't have one handy.  The underlying
    // call has no side effects, so using the function entry node
    // suffices.
    SDValue Chain = DAG.getEntryNode();
    Chain = DAG.getCopyToReg(Chain, dl,
                             is64bit ? PPC::X3 : PPC::R3, GOTEntry);
    SDValue ParmReg = DAG.getRegister(is64bit ? PPC::X3 : PPC::R3,
                                      is64bit ? MVT::i64 : MVT::i32);
    SDValue TLSAddr = DAG.getNode(PPCISD::GET_TLSLD_ADDR, dl,
                                  PtrVT, ParmReg, TGA);
    // The return value from GET_TLSLD_ADDR really is in X3 already, but
    // some hacks are needed here to tie everything together.  The extra
    // copies dissolve during subsequent transforms.
    Chain = DAG.getCopyToReg(Chain, dl, is64bit ? PPC::X3 : PPC::R3, TLSAddr);
    SDValue DtvOffsetHi = DAG.getNode(PPCISD::ADDIS_DTPREL_HA, dl, PtrVT,
                                      Chain, ParmReg, TGA);
    return DAG.getNode(PPCISD::ADDI_DTPREL_L, dl, PtrVT, DtvOffsetHi, TGA);
  }

  llvm_unreachable("Unknown TLS model!");
}

SDValue PPCTargetLowering::LowerGlobalAddress(SDValue Op,
                                              SelectionDAG &DAG) const {
  EVT PtrVT = Op.getValueType();
  GlobalAddressSDNode *GSDN = cast<GlobalAddressSDNode>(Op);
  SDLoc DL(GSDN);
  const GlobalValue *GV = GSDN->getGlobal();

  // 64-bit SVR4 ABI code is always position-independent.
  // The actual address of the GlobalValue is stored in the TOC.
  if (Subtarget.isSVR4ABI() && Subtarget.isPPC64()) {
    SDValue GA = DAG.getTargetGlobalAddress(GV, DL, PtrVT, GSDN->getOffset());
    return DAG.getNode(PPCISD::TOC_ENTRY, DL, MVT::i64, GA,
                       DAG.getRegister(PPC::X2, MVT::i64));
  }

  unsigned MOHiFlag, MOLoFlag;
  bool isPIC = GetLabelAccessInfo(DAG.getTarget(), MOHiFlag, MOLoFlag, GV);

  if (isPIC && Subtarget.isSVR4ABI()) {
    SDValue GA = DAG.getTargetGlobalAddress(GV, DL, PtrVT,
                                            GSDN->getOffset(),
                                            PPCII::MO_PIC_FLAG);
    return DAG.getNode(PPCISD::TOC_ENTRY, DL, MVT::i32, GA,
                       DAG.getNode(PPCISD::GlobalBaseReg, DL, MVT::i32));
  }

  SDValue GAHi =
    DAG.getTargetGlobalAddress(GV, DL, PtrVT, GSDN->getOffset(), MOHiFlag);
  SDValue GALo =
    DAG.getTargetGlobalAddress(GV, DL, PtrVT, GSDN->getOffset(), MOLoFlag);

  SDValue Ptr = LowerLabelRef(GAHi, GALo, isPIC, DAG);

  // If the global reference is actually to a non-lazy-pointer, we have to do an
  // extra load to get the address of the global.
  if (MOHiFlag & PPCII::MO_NLP_FLAG)
    Ptr = DAG.getLoad(PtrVT, DL, DAG.getEntryNode(), Ptr, MachinePointerInfo(),
                      false, false, false, 0);
  return Ptr;
}

SDValue PPCTargetLowering::LowerSETCC(SDValue Op, SelectionDAG &DAG) const {
  ISD::CondCode CC = cast<CondCodeSDNode>(Op.getOperand(2))->get();
  SDLoc dl(Op);

  if (Op.getValueType() == MVT::v2i64) {
    // When the operands themselves are v2i64 values, we need to do something
    // special because VSX has no underlying comparison operations for these.
    if (Op.getOperand(0).getValueType() == MVT::v2i64) {
      // Equality can be handled by casting to the legal type for Altivec
      // comparisons, everything else needs to be expanded.
      if (CC == ISD::SETEQ || CC == ISD::SETNE) {
        return DAG.getNode(ISD::BITCAST, dl, MVT::v2i64,
                 DAG.getSetCC(dl, MVT::v4i32,
                   DAG.getNode(ISD::BITCAST, dl, MVT::v4i32, Op.getOperand(0)),
                   DAG.getNode(ISD::BITCAST, dl, MVT::v4i32, Op.getOperand(1)),
                   CC));
      }

      return SDValue();
    }

    // We handle most of these in the usual way.
    return Op;
  }

  // If we're comparing for equality to zero, expose the fact that this is
  // implented as a ctlz/srl pair on ppc, so that the dag combiner can
  // fold the new nodes.
  if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op.getOperand(1))) {
    if (C->isNullValue() && CC == ISD::SETEQ) {
      EVT VT = Op.getOperand(0).getValueType();
      SDValue Zext = Op.getOperand(0);
      if (VT.bitsLT(MVT::i32)) {
        VT = MVT::i32;
        Zext = DAG.getNode(ISD::ZERO_EXTEND, dl, VT, Op.getOperand(0));
      }
      unsigned Log2b = Log2_32(VT.getSizeInBits());
      SDValue Clz = DAG.getNode(ISD::CTLZ, dl, VT, Zext);
      SDValue Scc = DAG.getNode(ISD::SRL, dl, VT, Clz,
                                DAG.getConstant(Log2b, MVT::i32));
      return DAG.getNode(ISD::TRUNCATE, dl, MVT::i32, Scc);
    }
    // Leave comparisons against 0 and -1 alone for now, since they're usually
    // optimized.  FIXME: revisit this when we can custom lower all setcc
    // optimizations.
    if (C->isAllOnesValue() || C->isNullValue())
      return SDValue();
  }

  // If we have an integer seteq/setne, turn it into a compare against zero
  // by xor'ing the rhs with the lhs, which is faster than setting a
  // condition register, reading it back out, and masking the correct bit.  The
  // normal approach here uses sub to do this instead of xor.  Using xor exposes
  // the result to other bit-twiddling opportunities.
  EVT LHSVT = Op.getOperand(0).getValueType();
  if (LHSVT.isInteger() && (CC == ISD::SETEQ || CC == ISD::SETNE)) {
    EVT VT = Op.getValueType();
    SDValue Sub = DAG.getNode(ISD::XOR, dl, LHSVT, Op.getOperand(0),
                                Op.getOperand(1));
    return DAG.getSetCC(dl, VT, Sub, DAG.getConstant(0, LHSVT), CC);
  }
  return SDValue();
}

SDValue PPCTargetLowering::LowerVAARG(SDValue Op, SelectionDAG &DAG,
                                      const PPCSubtarget &Subtarget) const {
  SDNode *Node = Op.getNode();
  EVT VT = Node->getValueType(0);
  EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();
  SDValue InChain = Node->getOperand(0);
  SDValue VAListPtr = Node->getOperand(1);
  const Value *SV = cast<SrcValueSDNode>(Node->getOperand(2))->getValue();
  SDLoc dl(Node);

  assert(!Subtarget.isPPC64() && "LowerVAARG is PPC32 only");

  // gpr_index
  SDValue GprIndex = DAG.getExtLoad(ISD::ZEXTLOAD, dl, MVT::i32, InChain,
                                    VAListPtr, MachinePointerInfo(SV), MVT::i8,
                                    false, false, false, 0);
  InChain = GprIndex.getValue(1);

  if (VT == MVT::i64) {
    // Check if GprIndex is even
    SDValue GprAnd = DAG.getNode(ISD::AND, dl, MVT::i32, GprIndex,
                                 DAG.getConstant(1, MVT::i32));
    SDValue CC64 = DAG.getSetCC(dl, MVT::i32, GprAnd,
                                DAG.getConstant(0, MVT::i32), ISD::SETNE);
    SDValue GprIndexPlusOne = DAG.getNode(ISD::ADD, dl, MVT::i32, GprIndex,
                                          DAG.getConstant(1, MVT::i32));
    // Align GprIndex to be even if it isn't
    GprIndex = DAG.getNode(ISD::SELECT, dl, MVT::i32, CC64, GprIndexPlusOne,
                           GprIndex);
  }

  // fpr index is 1 byte after gpr
  SDValue FprPtr = DAG.getNode(ISD::ADD, dl, PtrVT, VAListPtr,
                               DAG.getConstant(1, MVT::i32));

  // fpr
  SDValue FprIndex = DAG.getExtLoad(ISD::ZEXTLOAD, dl, MVT::i32, InChain,
                                    FprPtr, MachinePointerInfo(SV), MVT::i8,
                                    false, false, false, 0);
  InChain = FprIndex.getValue(1);

  SDValue RegSaveAreaPtr = DAG.getNode(ISD::ADD, dl, PtrVT, VAListPtr,
                                       DAG.getConstant(8, MVT::i32));

  SDValue OverflowAreaPtr = DAG.getNode(ISD::ADD, dl, PtrVT, VAListPtr,
                                        DAG.getConstant(4, MVT::i32));

  // areas
  SDValue OverflowArea = DAG.getLoad(MVT::i32, dl, InChain, OverflowAreaPtr,
                                     MachinePointerInfo(), false, false,
                                     false, 0);
  InChain = OverflowArea.getValue(1);

  SDValue RegSaveArea = DAG.getLoad(MVT::i32, dl, InChain, RegSaveAreaPtr,
                                    MachinePointerInfo(), false, false,
                                    false, 0);
  InChain = RegSaveArea.getValue(1);

  // select overflow_area if index > 8
  SDValue CC = DAG.getSetCC(dl, MVT::i32, VT.isInteger() ? GprIndex : FprIndex,
                            DAG.getConstant(8, MVT::i32), ISD::SETLT);

  // adjustment constant gpr_index * 4/8
  SDValue RegConstant = DAG.getNode(ISD::MUL, dl, MVT::i32,
                                    VT.isInteger() ? GprIndex : FprIndex,
                                    DAG.getConstant(VT.isInteger() ? 4 : 8,
                                                    MVT::i32));

  // OurReg = RegSaveArea + RegConstant
  SDValue OurReg = DAG.getNode(ISD::ADD, dl, PtrVT, RegSaveArea,
                               RegConstant);

  // Floating types are 32 bytes into RegSaveArea
  if (VT.isFloatingPoint())
    OurReg = DAG.getNode(ISD::ADD, dl, PtrVT, OurReg,
                         DAG.getConstant(32, MVT::i32));

  // increase {f,g}pr_index by 1 (or 2 if VT is i64)
  SDValue IndexPlus1 = DAG.getNode(ISD::ADD, dl, MVT::i32,
                                   VT.isInteger() ? GprIndex : FprIndex,
                                   DAG.getConstant(VT == MVT::i64 ? 2 : 1,
                                                   MVT::i32));

  InChain = DAG.getTruncStore(InChain, dl, IndexPlus1,
                              VT.isInteger() ? VAListPtr : FprPtr,
                              MachinePointerInfo(SV),
                              MVT::i8, false, false, 0);

  // determine if we should load from reg_save_area or overflow_area
  SDValue Result = DAG.getNode(ISD::SELECT, dl, PtrVT, CC, OurReg, OverflowArea);

  // increase overflow_area by 4/8 if gpr/fpr > 8
  SDValue OverflowAreaPlusN = DAG.getNode(ISD::ADD, dl, PtrVT, OverflowArea,
                                          DAG.getConstant(VT.isInteger() ? 4 : 8,
                                          MVT::i32));

  OverflowArea = DAG.getNode(ISD::SELECT, dl, MVT::i32, CC, OverflowArea,
                             OverflowAreaPlusN);

  InChain = DAG.getTruncStore(InChain, dl, OverflowArea,
                              OverflowAreaPtr,
                              MachinePointerInfo(),
                              MVT::i32, false, false, 0);

  return DAG.getLoad(VT, dl, InChain, Result, MachinePointerInfo(),
                     false, false, false, 0);
}

SDValue PPCTargetLowering::LowerVACOPY(SDValue Op, SelectionDAG &DAG,
                                       const PPCSubtarget &Subtarget) const {
  assert(!Subtarget.isPPC64() && "LowerVACOPY is PPC32 only");

  // We have to copy the entire va_list struct:
  // 2*sizeof(char) + 2 Byte alignment + 2*sizeof(char*) = 12 Byte
  return DAG.getMemcpy(Op.getOperand(0), Op,
                       Op.getOperand(1), Op.getOperand(2),
                       DAG.getConstant(12, MVT::i32), 8, false, true,
                       MachinePointerInfo(), MachinePointerInfo());
}

SDValue PPCTargetLowering::LowerADJUST_TRAMPOLINE(SDValue Op,
                                                  SelectionDAG &DAG) const {
  return Op.getOperand(0);
}

SDValue PPCTargetLowering::LowerINIT_TRAMPOLINE(SDValue Op,
                                                SelectionDAG &DAG) const {
  SDValue Chain = Op.getOperand(0);
  SDValue Trmp = Op.getOperand(1); // trampoline
  SDValue FPtr = Op.getOperand(2); // nested function
  SDValue Nest = Op.getOperand(3); // 'nest' parameter value
  SDLoc dl(Op);

  EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();
  bool isPPC64 = (PtrVT == MVT::i64);
  Type *IntPtrTy =
    DAG.getTargetLoweringInfo().getDataLayout()->getIntPtrType(
                                                             *DAG.getContext());

  TargetLowering::ArgListTy Args;
  TargetLowering::ArgListEntry Entry;

  Entry.Ty = IntPtrTy;
  Entry.Node = Trmp; Args.push_back(Entry);

  // TrampSize == (isPPC64 ? 48 : 40);
  Entry.Node = DAG.getConstant(isPPC64 ? 48 : 40,
                               isPPC64 ? MVT::i64 : MVT::i32);
  Args.push_back(Entry);

  Entry.Node = FPtr; Args.push_back(Entry);
  Entry.Node = Nest; Args.push_back(Entry);

  // Lower to a call to __trampoline_setup(Trmp, TrampSize, FPtr, ctx_reg)
  TargetLowering::CallLoweringInfo CLI(DAG);
  CLI.setDebugLoc(dl).setChain(Chain)
    .setCallee(CallingConv::C, Type::getVoidTy(*DAG.getContext()),
               DAG.getExternalSymbol("__trampoline_setup", PtrVT),
               std::move(Args), 0);

  std::pair<SDValue, SDValue> CallResult = LowerCallTo(CLI);
  return CallResult.second;
}

SDValue PPCTargetLowering::LowerVASTART(SDValue Op, SelectionDAG &DAG,
                                        const PPCSubtarget &Subtarget) const {
  MachineFunction &MF = DAG.getMachineFunction();
  PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>();

  SDLoc dl(Op);

  if (Subtarget.isDarwinABI() || Subtarget.isPPC64()) {
    // vastart just stores the address of the VarArgsFrameIndex slot into the
    // memory location argument.
    EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();
    SDValue FR = DAG.getFrameIndex(FuncInfo->getVarArgsFrameIndex(), PtrVT);
    const Value *SV = cast<SrcValueSDNode>(Op.getOperand(2))->getValue();
    return DAG.getStore(Op.getOperand(0), dl, FR, Op.getOperand(1),
                        MachinePointerInfo(SV),
                        false, false, 0);
  }

  // For the 32-bit SVR4 ABI we follow the layout of the va_list struct.
  // We suppose the given va_list is already allocated.
  //
  // typedef struct {
  //  char gpr;     /* index into the array of 8 GPRs
  //                 * stored in the register save area
  //                 * gpr=0 corresponds to r3,
  //                 * gpr=1 to r4, etc.
  //                 */
  //  char fpr;     /* index into the array of 8 FPRs
  //                 * stored in the register save area
  //                 * fpr=0 corresponds to f1,
  //                 * fpr=1 to f2, etc.
  //                 */
  //  char *overflow_arg_area;
  //                /* location on stack that holds
  //                 * the next overflow argument
  //                 */
  //  char *reg_save_area;
  //               /* where r3:r10 and f1:f8 (if saved)
  //                * are stored
  //                */
  // } va_list[1];


  SDValue ArgGPR = DAG.getConstant(FuncInfo->getVarArgsNumGPR(), MVT::i32);
  SDValue ArgFPR = DAG.getConstant(FuncInfo->getVarArgsNumFPR(), MVT::i32);


  EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();

  SDValue StackOffsetFI = DAG.getFrameIndex(FuncInfo->getVarArgsStackOffset(),
                                            PtrVT);
  SDValue FR = DAG.getFrameIndex(FuncInfo->getVarArgsFrameIndex(),
                                 PtrVT);

  uint64_t FrameOffset = PtrVT.getSizeInBits()/8;
  SDValue ConstFrameOffset = DAG.getConstant(FrameOffset, PtrVT);

  uint64_t StackOffset = PtrVT.getSizeInBits()/8 - 1;
  SDValue ConstStackOffset = DAG.getConstant(StackOffset, PtrVT);

  uint64_t FPROffset = 1;
  SDValue ConstFPROffset = DAG.getConstant(FPROffset, PtrVT);

  const Value *SV = cast<SrcValueSDNode>(Op.getOperand(2))->getValue();

  // Store first byte : number of int regs
  SDValue firstStore = DAG.getTruncStore(Op.getOperand(0), dl, ArgGPR,
                                         Op.getOperand(1),
                                         MachinePointerInfo(SV),
                                         MVT::i8, false, false, 0);
  uint64_t nextOffset = FPROffset;
  SDValue nextPtr = DAG.getNode(ISD::ADD, dl, PtrVT, Op.getOperand(1),
                                  ConstFPROffset);

  // Store second byte : number of float regs
  SDValue secondStore =
    DAG.getTruncStore(firstStore, dl, ArgFPR, nextPtr,
                      MachinePointerInfo(SV, nextOffset), MVT::i8,
                      false, false, 0);
  nextOffset += StackOffset;
  nextPtr = DAG.getNode(ISD::ADD, dl, PtrVT, nextPtr, ConstStackOffset);

  // Store second word : arguments given on stack
  SDValue thirdStore =
    DAG.getStore(secondStore, dl, StackOffsetFI, nextPtr,
                 MachinePointerInfo(SV, nextOffset),
                 false, false, 0);
  nextOffset += FrameOffset;
  nextPtr = DAG.getNode(ISD::ADD, dl, PtrVT, nextPtr, ConstFrameOffset);

  // Store third word : arguments given in registers
  return DAG.getStore(thirdStore, dl, FR, nextPtr,
                      MachinePointerInfo(SV, nextOffset),
                      false, false, 0);

}

#include "PPCGenCallingConv.inc"

// Function whose sole purpose is to kill compiler warnings 
// stemming from unused functions included from PPCGenCallingConv.inc.
CCAssignFn *PPCTargetLowering::useFastISelCCs(unsigned Flag) const {
  return Flag ? CC_PPC64_ELF_FIS : RetCC_PPC64_ELF_FIS;
}

bool llvm::CC_PPC32_SVR4_Custom_Dummy(unsigned &ValNo, MVT &ValVT, MVT &LocVT,
                                      CCValAssign::LocInfo &LocInfo,
                                      ISD::ArgFlagsTy &ArgFlags,
                                      CCState &State) {
  return true;
}

bool llvm::CC_PPC32_SVR4_Custom_AlignArgRegs(unsigned &ValNo, MVT &ValVT,
                                             MVT &LocVT,
                                             CCValAssign::LocInfo &LocInfo,
                                             ISD::ArgFlagsTy &ArgFlags,
                                             CCState &State) {
  static const MCPhysReg ArgRegs[] = {
    PPC::R3, PPC::R4, PPC::R5, PPC::R6,
    PPC::R7, PPC::R8, PPC::R9, PPC::R10,
  };
  const unsigned NumArgRegs = array_lengthof(ArgRegs);

  unsigned RegNum = State.getFirstUnallocated(ArgRegs, NumArgRegs);

  // Skip one register if the first unallocated register has an even register
  // number and there are still argument registers available which have not been
  // allocated yet. RegNum is actually an index into ArgRegs, which means we
  // need to skip a register if RegNum is odd.
  if (RegNum != NumArgRegs && RegNum % 2 == 1) {
    State.AllocateReg(ArgRegs[RegNum]);
  }

  // Always return false here, as this function only makes sure that the first
  // unallocated register has an odd register number and does not actually
  // allocate a register for the current argument.
  return false;
}

bool llvm::CC_PPC32_SVR4_Custom_AlignFPArgRegs(unsigned &ValNo, MVT &ValVT,
                                               MVT &LocVT,
                                               CCValAssign::LocInfo &LocInfo,
                                               ISD::ArgFlagsTy &ArgFlags,
                                               CCState &State) {
  static const MCPhysReg ArgRegs[] = {
    PPC::F1, PPC::F2, PPC::F3, PPC::F4, PPC::F5, PPC::F6, PPC::F7,
    PPC::F8
  };

  const unsigned NumArgRegs = array_lengthof(ArgRegs);

  unsigned RegNum = State.getFirstUnallocated(ArgRegs, NumArgRegs);

  // If there is only one Floating-point register left we need to put both f64
  // values of a split ppc_fp128 value on the stack.
  if (RegNum != NumArgRegs && ArgRegs[RegNum] == PPC::F8) {
    State.AllocateReg(ArgRegs[RegNum]);
  }

  // Always return false here, as this function only makes sure that the two f64
  // values a ppc_fp128 value is split into are both passed in registers or both
  // passed on the stack and does not actually allocate a register for the
  // current argument.
  return false;
}

/// GetFPR - Get the set of FP registers that should be allocated for arguments,
/// on Darwin.
static const MCPhysReg *GetFPR() {
  static const MCPhysReg FPR[] = {
    PPC::F1, PPC::F2, PPC::F3, PPC::F4, PPC::F5, PPC::F6, PPC::F7,
    PPC::F8, PPC::F9, PPC::F10, PPC::F11, PPC::F12, PPC::F13
  };

  return FPR;
}

/// CalculateStackSlotSize - Calculates the size reserved for this argument on
/// the stack.
static unsigned CalculateStackSlotSize(EVT ArgVT, ISD::ArgFlagsTy Flags,
                                       unsigned PtrByteSize) {
  unsigned ArgSize = ArgVT.getStoreSize();
  if (Flags.isByVal())
    ArgSize = Flags.getByValSize();

  // Round up to multiples of the pointer size, except for array members,
  // which are always packed.
  if (!Flags.isInConsecutiveRegs())
    ArgSize = ((ArgSize + PtrByteSize - 1)/PtrByteSize) * PtrByteSize;

  return ArgSize;
}

/// CalculateStackSlotAlignment - Calculates the alignment of this argument
/// on the stack.
static unsigned CalculateStackSlotAlignment(EVT ArgVT, EVT OrigVT,
                                            ISD::ArgFlagsTy Flags,
                                            unsigned PtrByteSize) {
  unsigned Align = PtrByteSize;

  // Altivec parameters are padded to a 16 byte boundary.
  if (ArgVT == MVT::v4f32 || ArgVT == MVT::v4i32 ||
      ArgVT == MVT::v8i16 || ArgVT == MVT::v16i8 ||
      ArgVT == MVT::v2f64 || ArgVT == MVT::v2i64)
    Align = 16;

  // ByVal parameters are aligned as requested.
  if (Flags.isByVal()) {
    unsigned BVAlign = Flags.getByValAlign();
    if (BVAlign > PtrByteSize) {
      if (BVAlign % PtrByteSize != 0)
          llvm_unreachable(
            "ByVal alignment is not a multiple of the pointer size");

      Align = BVAlign;
    }
  }

  // Array members are always packed to their original alignment.
  if (Flags.isInConsecutiveRegs()) {
    // If the array member was split into multiple registers, the first
    // needs to be aligned to the size of the full type.  (Except for
    // ppcf128, which is only aligned as its f64 components.)
    if (Flags.isSplit() && OrigVT != MVT::ppcf128)
      Align = OrigVT.getStoreSize();
    else
      Align = ArgVT.getStoreSize();
  }

  return Align;
}

/// CalculateStackSlotUsed - Return whether this argument will use its
/// stack slot (instead of being passed in registers).  ArgOffset,
/// AvailableFPRs, and AvailableVRs must hold the current argument
/// position, and will be updated to account for this argument.
static bool CalculateStackSlotUsed(EVT ArgVT, EVT OrigVT,
                                   ISD::ArgFlagsTy Flags,
                                   unsigned PtrByteSize,
                                   unsigned LinkageSize,
                                   unsigned ParamAreaSize,
                                   unsigned &ArgOffset,
                                   unsigned &AvailableFPRs,
                                   unsigned &AvailableVRs) {
  bool UseMemory = false;

  // Respect alignment of argument on the stack.
  unsigned Align =
    CalculateStackSlotAlignment(ArgVT, OrigVT, Flags, PtrByteSize);
  ArgOffset = ((ArgOffset + Align - 1) / Align) * Align;
  // If there's no space left in the argument save area, we must
  // use memory (this check also catches zero-sized arguments).
  if (ArgOffset >= LinkageSize + ParamAreaSize)
    UseMemory = true;

  // Allocate argument on the stack.
  ArgOffset += CalculateStackSlotSize(ArgVT, Flags, PtrByteSize);
  if (Flags.isInConsecutiveRegsLast())
    ArgOffset = ((ArgOffset + PtrByteSize - 1)/PtrByteSize) * PtrByteSize;
  // If we overran the argument save area, we must use memory
  // (this check catches arguments passed partially in memory)
  if (ArgOffset > LinkageSize + ParamAreaSize)
    UseMemory = true;

  // However, if the argument is actually passed in an FPR or a VR,
  // we don't use memory after all.
  if (!Flags.isByVal()) {
    if (ArgVT == MVT::f32 || ArgVT == MVT::f64)
      if (AvailableFPRs > 0) {
        --AvailableFPRs;
        return false;
      }
    if (ArgVT == MVT::v4f32 || ArgVT == MVT::v4i32 ||
        ArgVT == MVT::v8i16 || ArgVT == MVT::v16i8 ||
        ArgVT == MVT::v2f64 || ArgVT == MVT::v2i64)
      if (AvailableVRs > 0) {
        --AvailableVRs;
        return false;
      }
  }

  return UseMemory;
}

/// EnsureStackAlignment - Round stack frame size up from NumBytes to
/// ensure minimum alignment required for target.
static unsigned EnsureStackAlignment(const TargetMachine &Target,
                                     unsigned NumBytes) {
  unsigned TargetAlign =
      Target.getSubtargetImpl()->getFrameLowering()->getStackAlignment();
  unsigned AlignMask = TargetAlign - 1;
  NumBytes = (NumBytes + AlignMask) & ~AlignMask;
  return NumBytes;
}

SDValue
PPCTargetLowering::LowerFormalArguments(SDValue Chain,
                                        CallingConv::ID CallConv, bool isVarArg,
                                        const SmallVectorImpl<ISD::InputArg>
                                          &Ins,
                                        SDLoc dl, SelectionDAG &DAG,
                                        SmallVectorImpl<SDValue> &InVals)
                                          const {
  if (Subtarget.isSVR4ABI()) {
    if (Subtarget.isPPC64())
      return LowerFormalArguments_64SVR4(Chain, CallConv, isVarArg, Ins,
                                         dl, DAG, InVals);
    else
      return LowerFormalArguments_32SVR4(Chain, CallConv, isVarArg, Ins,
                                         dl, DAG, InVals);
  } else {
    return LowerFormalArguments_Darwin(Chain, CallConv, isVarArg, Ins,
                                       dl, DAG, InVals);
  }
}

SDValue
PPCTargetLowering::LowerFormalArguments_32SVR4(
                                      SDValue Chain,
                                      CallingConv::ID CallConv, bool isVarArg,
                                      const SmallVectorImpl<ISD::InputArg>
                                        &Ins,
                                      SDLoc dl, SelectionDAG &DAG,
                                      SmallVectorImpl<SDValue> &InVals) const {

  // 32-bit SVR4 ABI Stack Frame Layout:
  //              +-----------------------------------+
  //        +-->  |            Back chain             |
  //        |     +-----------------------------------+
  //        |     | Floating-point register save area |
  //        |     +-----------------------------------+
  //        |     |    General register save area     |
  //        |     +-----------------------------------+
  //        |     |          CR save word             |
  //        |     +-----------------------------------+
  //        |     |         VRSAVE save word          |
  //        |     +-----------------------------------+
  //        |     |         Alignment padding         |
  //        |     +-----------------------------------+
  //        |     |     Vector register save area     |
  //        |     +-----------------------------------+
  //        |     |       Local variable space        |
  //        |     +-----------------------------------+
  //        |     |        Parameter list area        |
  //        |     +-----------------------------------+
  //        |     |           LR save word            |
  //        |     +-----------------------------------+
  // SP-->  +---  |            Back chain             |
  //              +-----------------------------------+
  //
  // Specifications:
  //   System V Application Binary Interface PowerPC Processor Supplement
  //   AltiVec Technology Programming Interface Manual

  MachineFunction &MF = DAG.getMachineFunction();
  MachineFrameInfo *MFI = MF.getFrameInfo();
  PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>();

  EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();
  // Potential tail calls could cause overwriting of argument stack slots.
  bool isImmutable = !(getTargetMachine().Options.GuaranteedTailCallOpt &&
                       (CallConv == CallingConv::Fast));
  unsigned PtrByteSize = 4;

  // Assign locations to all of the incoming arguments.
  SmallVector<CCValAssign, 16> ArgLocs;
  CCState CCInfo(CallConv, isVarArg, DAG.getMachineFunction(), ArgLocs,
                 *DAG.getContext());

  // Reserve space for the linkage area on the stack.
  unsigned LinkageSize = PPCFrameLowering::getLinkageSize(false, false, false);
  CCInfo.AllocateStack(LinkageSize, PtrByteSize);

  CCInfo.AnalyzeFormalArguments(Ins, CC_PPC32_SVR4);

  for (unsigned i = 0, e = ArgLocs.size(); i != e; ++i) {
    CCValAssign &VA = ArgLocs[i];

    // Arguments stored in registers.
    if (VA.isRegLoc()) {
      const TargetRegisterClass *RC;
      EVT ValVT = VA.getValVT();

      switch (ValVT.getSimpleVT().SimpleTy) {
        default:
          llvm_unreachable("ValVT not supported by formal arguments Lowering");
        case MVT::i1:
        case MVT::i32:
          RC = &PPC::GPRCRegClass;
          break;
        case MVT::f32:
          RC = &PPC::F4RCRegClass;
          break;
        case MVT::f64:
          if (Subtarget.hasVSX())
            RC = &PPC::VSFRCRegClass;
          else
            RC = &PPC::F8RCRegClass;
          break;
        case MVT::v16i8:
        case MVT::v8i16:
        case MVT::v4i32:
        case MVT::v4f32:
          RC = &PPC::VRRCRegClass;
          break;
        case MVT::v2f64:
        case MVT::v2i64:
          RC = &PPC::VSHRCRegClass;
          break;
      }

      // Transform the arguments stored in physical registers into virtual ones.
      unsigned Reg = MF.addLiveIn(VA.getLocReg(), RC);
      SDValue ArgValue = DAG.getCopyFromReg(Chain, dl, Reg,
                                            ValVT == MVT::i1 ? MVT::i32 : ValVT);

      if (ValVT == MVT::i1)
        ArgValue = DAG.getNode(ISD::TRUNCATE, dl, MVT::i1, ArgValue);

      InVals.push_back(ArgValue);
    } else {
      // Argument stored in memory.
      assert(VA.isMemLoc());

      unsigned ArgSize = VA.getLocVT().getStoreSize();
      int FI = MFI->CreateFixedObject(ArgSize, VA.getLocMemOffset(),
                                      isImmutable);

      // Create load nodes to retrieve arguments from the stack.
      SDValue FIN = DAG.getFrameIndex(FI, PtrVT);
      InVals.push_back(DAG.getLoad(VA.getValVT(), dl, Chain, FIN,
                                   MachinePointerInfo(),
                                   false, false, false, 0));
    }
  }

  // Assign locations to all of the incoming aggregate by value arguments.
  // Aggregates passed by value are stored in the local variable space of the
  // caller's stack frame, right above the parameter list area.
  SmallVector<CCValAssign, 16> ByValArgLocs;
  CCState CCByValInfo(CallConv, isVarArg, DAG.getMachineFunction(),
                      ByValArgLocs, *DAG.getContext());

  // Reserve stack space for the allocations in CCInfo.
  CCByValInfo.AllocateStack(CCInfo.getNextStackOffset(), PtrByteSize);

  CCByValInfo.AnalyzeFormalArguments(Ins, CC_PPC32_SVR4_ByVal);

  // Area that is at least reserved in the caller of this function.
  unsigned MinReservedArea = CCByValInfo.getNextStackOffset();
  MinReservedArea = std::max(MinReservedArea, LinkageSize);

  // Set the size that is at least reserved in caller of this function.  Tail
  // call optimized function's reserved stack space needs to be aligned so that
  // taking the difference between two stack areas will result in an aligned
  // stack.
  MinReservedArea = EnsureStackAlignment(MF.getTarget(), MinReservedArea);
  FuncInfo->setMinReservedArea(MinReservedArea);

  SmallVector<SDValue, 8> MemOps;

  // If the function takes variable number of arguments, make a frame index for
  // the start of the first vararg value... for expansion of llvm.va_start.
  if (isVarArg) {
    static const MCPhysReg GPArgRegs[] = {
      PPC::R3, PPC::R4, PPC::R5, PPC::R6,
      PPC::R7, PPC::R8, PPC::R9, PPC::R10,
    };
    const unsigned NumGPArgRegs = array_lengthof(GPArgRegs);

    static const MCPhysReg FPArgRegs[] = {
      PPC::F1, PPC::F2, PPC::F3, PPC::F4, PPC::F5, PPC::F6, PPC::F7,
      PPC::F8
    };
    unsigned NumFPArgRegs = array_lengthof(FPArgRegs);
    if (DisablePPCFloatInVariadic)
      NumFPArgRegs = 0;

    FuncInfo->setVarArgsNumGPR(CCInfo.getFirstUnallocated(GPArgRegs,
                                                          NumGPArgRegs));
    FuncInfo->setVarArgsNumFPR(CCInfo.getFirstUnallocated(FPArgRegs,
                                                          NumFPArgRegs));

    // Make room for NumGPArgRegs and NumFPArgRegs.
    int Depth = NumGPArgRegs * PtrVT.getSizeInBits()/8 +
                NumFPArgRegs * EVT(MVT::f64).getSizeInBits()/8;

    FuncInfo->setVarArgsStackOffset(
      MFI->CreateFixedObject(PtrVT.getSizeInBits()/8,
                             CCInfo.getNextStackOffset(), true));

    FuncInfo->setVarArgsFrameIndex(MFI->CreateStackObject(Depth, 8, false));
    SDValue FIN = DAG.getFrameIndex(FuncInfo->getVarArgsFrameIndex(), PtrVT);

    // The fixed integer arguments of a variadic function are stored to the
    // VarArgsFrameIndex on the stack so that they may be loaded by deferencing
    // the result of va_next.
    for (unsigned GPRIndex = 0; GPRIndex != NumGPArgRegs; ++GPRIndex) {
      // Get an existing live-in vreg, or add a new one.
      unsigned VReg = MF.getRegInfo().getLiveInVirtReg(GPArgRegs[GPRIndex]);
      if (!VReg)
        VReg = MF.addLiveIn(GPArgRegs[GPRIndex], &PPC::GPRCRegClass);

      SDValue Val = DAG.getCopyFromReg(Chain, dl, VReg, PtrVT);
      SDValue Store = DAG.getStore(Val.getValue(1), dl, Val, FIN,
                                   MachinePointerInfo(), false, false, 0);
      MemOps.push_back(Store);
      // Increment the address by four for the next argument to store
      SDValue PtrOff = DAG.getConstant(PtrVT.getSizeInBits()/8, PtrVT);
      FIN = DAG.getNode(ISD::ADD, dl, PtrOff.getValueType(), FIN, PtrOff);
    }

    // FIXME 32-bit SVR4: We only need to save FP argument registers if CR bit 6
    // is set.
    // The double arguments are stored to the VarArgsFrameIndex
    // on the stack.
    for (unsigned FPRIndex = 0; FPRIndex != NumFPArgRegs; ++FPRIndex) {
      // Get an existing live-in vreg, or add a new one.
      unsigned VReg = MF.getRegInfo().getLiveInVirtReg(FPArgRegs[FPRIndex]);
      if (!VReg)
        VReg = MF.addLiveIn(FPArgRegs[FPRIndex], &PPC::F8RCRegClass);

      SDValue Val = DAG.getCopyFromReg(Chain, dl, VReg, MVT::f64);
      SDValue Store = DAG.getStore(Val.getValue(1), dl, Val, FIN,
                                   MachinePointerInfo(), false, false, 0);
      MemOps.push_back(Store);
      // Increment the address by eight for the next argument to store
      SDValue PtrOff = DAG.getConstant(EVT(MVT::f64).getSizeInBits()/8,
                                         PtrVT);
      FIN = DAG.getNode(ISD::ADD, dl, PtrOff.getValueType(), FIN, PtrOff);
    }
  }

  if (!MemOps.empty())
    Chain = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, MemOps);

  return Chain;
}

// PPC64 passes i8, i16, and i32 values in i64 registers. Promote
// value to MVT::i64 and then truncate to the correct register size.
SDValue
PPCTargetLowering::extendArgForPPC64(ISD::ArgFlagsTy Flags, EVT ObjectVT,
                                     SelectionDAG &DAG, SDValue ArgVal,
                                     SDLoc dl) const {
  if (Flags.isSExt())
    ArgVal = DAG.getNode(ISD::AssertSext, dl, MVT::i64, ArgVal,
                         DAG.getValueType(ObjectVT));
  else if (Flags.isZExt())
    ArgVal = DAG.getNode(ISD::AssertZext, dl, MVT::i64, ArgVal,
                         DAG.getValueType(ObjectVT));

  return DAG.getNode(ISD::TRUNCATE, dl, ObjectVT, ArgVal);
}

SDValue
PPCTargetLowering::LowerFormalArguments_64SVR4(
                                      SDValue Chain,
                                      CallingConv::ID CallConv, bool isVarArg,
                                      const SmallVectorImpl<ISD::InputArg>
                                        &Ins,
                                      SDLoc dl, SelectionDAG &DAG,
                                      SmallVectorImpl<SDValue> &InVals) const {
  // TODO: add description of PPC stack frame format, or at least some docs.
  //
  bool isELFv2ABI = Subtarget.isELFv2ABI();
  bool isLittleEndian = Subtarget.isLittleEndian();
  MachineFunction &MF = DAG.getMachineFunction();
  MachineFrameInfo *MFI = MF.getFrameInfo();
  PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>();

  EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();
  // Potential tail calls could cause overwriting of argument stack slots.
  bool isImmutable = !(getTargetMachine().Options.GuaranteedTailCallOpt &&
                       (CallConv == CallingConv::Fast));
  unsigned PtrByteSize = 8;

  unsigned LinkageSize = PPCFrameLowering::getLinkageSize(true, false,
                                                          isELFv2ABI);

  static const MCPhysReg GPR[] = {
    PPC::X3, PPC::X4, PPC::X5, PPC::X6,
    PPC::X7, PPC::X8, PPC::X9, PPC::X10,
  };

  static const MCPhysReg *FPR = GetFPR();

  static const MCPhysReg VR[] = {
    PPC::V2, PPC::V3, PPC::V4, PPC::V5, PPC::V6, PPC::V7, PPC::V8,
    PPC::V9, PPC::V10, PPC::V11, PPC::V12, PPC::V13
  };
  static const MCPhysReg VSRH[] = {
    PPC::VSH2, PPC::VSH3, PPC::VSH4, PPC::VSH5, PPC::VSH6, PPC::VSH7, PPC::VSH8,
    PPC::VSH9, PPC::VSH10, PPC::VSH11, PPC::VSH12, PPC::VSH13
  };

  const unsigned Num_GPR_Regs = array_lengthof(GPR);
  const unsigned Num_FPR_Regs = 13;
  const unsigned Num_VR_Regs  = array_lengthof(VR);

  // Do a first pass over the arguments to determine whether the ABI
  // guarantees that our caller has allocated the parameter save area
  // on its stack frame.  In the ELFv1 ABI, this is always the case;
  // in the ELFv2 ABI, it is true if this is a vararg function or if
  // any parameter is located in a stack slot.

  bool HasParameterArea = !isELFv2ABI || isVarArg;
  unsigned ParamAreaSize = Num_GPR_Regs * PtrByteSize;
  unsigned NumBytes = LinkageSize;
  unsigned AvailableFPRs = Num_FPR_Regs;
  unsigned AvailableVRs = Num_VR_Regs;
  for (unsigned i = 0, e = Ins.size(); i != e; ++i)
    if (CalculateStackSlotUsed(Ins[i].VT, Ins[i].ArgVT, Ins[i].Flags,
                               PtrByteSize, LinkageSize, ParamAreaSize,
                               NumBytes, AvailableFPRs, AvailableVRs))
      HasParameterArea = true;

  // Add DAG nodes to load the arguments or copy them out of registers.  On
  // entry to a function on PPC, the arguments start after the linkage area,
  // although the first ones are often in registers.

  unsigned ArgOffset = LinkageSize;
  unsigned GPR_idx, FPR_idx = 0, VR_idx = 0;
  SmallVector<SDValue, 8> MemOps;
  Function::const_arg_iterator FuncArg = MF.getFunction()->arg_begin();
  unsigned CurArgIdx = 0;
  for (unsigned ArgNo = 0, e = Ins.size(); ArgNo != e; ++ArgNo) {
    SDValue ArgVal;
    bool needsLoad = false;
    EVT ObjectVT = Ins[ArgNo].VT;
    EVT OrigVT = Ins[ArgNo].ArgVT;
    unsigned ObjSize = ObjectVT.getStoreSize();
    unsigned ArgSize = ObjSize;
    ISD::ArgFlagsTy Flags = Ins[ArgNo].Flags;
    std::advance(FuncArg, Ins[ArgNo].OrigArgIndex - CurArgIdx);
    CurArgIdx = Ins[ArgNo].OrigArgIndex;

    /* Respect alignment of argument on the stack.  */
    unsigned Align =
      CalculateStackSlotAlignment(ObjectVT, OrigVT, Flags, PtrByteSize);
    ArgOffset = ((ArgOffset + Align - 1) / Align) * Align;
    unsigned CurArgOffset = ArgOffset;

    /* Compute GPR index associated with argument offset.  */
    GPR_idx = (ArgOffset - LinkageSize) / PtrByteSize;
    GPR_idx = std::min(GPR_idx, Num_GPR_Regs);

    // FIXME the codegen can be much improved in some cases.
    // We do not have to keep everything in memory.
    if (Flags.isByVal()) {
      // ObjSize is the true size, ArgSize rounded up to multiple of registers.
      ObjSize = Flags.getByValSize();
      ArgSize = ((ObjSize + PtrByteSize - 1)/PtrByteSize) * PtrByteSize;
      // Empty aggregate parameters do not take up registers.  Examples:
      //   struct { } a;
      //   union  { } b;
      //   int c[0];
      // etc.  However, we have to provide a place-holder in InVals, so
      // pretend we have an 8-byte item at the current address for that
      // purpose.
      if (!ObjSize) {
        int FI = MFI->CreateFixedObject(PtrByteSize, ArgOffset, true);
        SDValue FIN = DAG.getFrameIndex(FI, PtrVT);
        InVals.push_back(FIN);
        continue;
      }

      // Create a stack object covering all stack doublewords occupied
      // by the argument.  If the argument is (fully or partially) on
      // the stack, or if the argument is fully in registers but the
      // caller has allocated the parameter save anyway, we can refer
      // directly to the caller's stack frame.  Otherwise, create a
      // local copy in our own frame.
      int FI;
      if (HasParameterArea ||
          ArgSize + ArgOffset > LinkageSize + Num_GPR_Regs * PtrByteSize)
        FI = MFI->CreateFixedObject(ArgSize, ArgOffset, false);
      else
        FI = MFI->CreateStackObject(ArgSize, Align, false);
      SDValue FIN = DAG.getFrameIndex(FI, PtrVT);

      // Handle aggregates smaller than 8 bytes.
      if (ObjSize < PtrByteSize) {
        // The value of the object is its address, which differs from the
        // address of the enclosing doubleword on big-endian systems.
        SDValue Arg = FIN;
        if (!isLittleEndian) {
          SDValue ArgOff = DAG.getConstant(PtrByteSize - ObjSize, PtrVT);
          Arg = DAG.getNode(ISD::ADD, dl, ArgOff.getValueType(), Arg, ArgOff);
        }
        InVals.push_back(Arg);

        if (GPR_idx != Num_GPR_Regs) {
          unsigned VReg = MF.addLiveIn(GPR[GPR_idx], &PPC::G8RCRegClass);
          SDValue Val = DAG.getCopyFromReg(Chain, dl, VReg, PtrVT);
          SDValue Store;

          if (ObjSize==1 || ObjSize==2 || ObjSize==4) {
            EVT ObjType = (ObjSize == 1 ? MVT::i8 :
                           (ObjSize == 2 ? MVT::i16 : MVT::i32));
            Store = DAG.getTruncStore(Val.getValue(1), dl, Val, Arg,
                                      MachinePointerInfo(FuncArg),
                                      ObjType, false, false, 0);
          } else {
            // For sizes that don't fit a truncating store (3, 5, 6, 7),
            // store the whole register as-is to the parameter save area
            // slot.
            Store = DAG.getStore(Val.getValue(1), dl, Val, FIN,
                                 MachinePointerInfo(FuncArg),
                                 false, false, 0);
          }

          MemOps.push_back(Store);
        }
        // Whether we copied from a register or not, advance the offset
        // into the parameter save area by a full doubleword.
        ArgOffset += PtrByteSize;
        continue;
      }

      // The value of the object is its address, which is the address of
      // its first stack doubleword.
      InVals.push_back(FIN);

      // Store whatever pieces of the object are in registers to memory.
      for (unsigned j = 0; j < ArgSize; j += PtrByteSize) {
        if (GPR_idx == Num_GPR_Regs)
          break;

        unsigned VReg = MF.addLiveIn(GPR[GPR_idx], &PPC::G8RCRegClass);
        SDValue Val = DAG.getCopyFromReg(Chain, dl, VReg, PtrVT);
        SDValue Addr = FIN;
        if (j) {
          SDValue Off = DAG.getConstant(j, PtrVT);
          Addr = DAG.getNode(ISD::ADD, dl, Off.getValueType(), Addr, Off);
        }
        SDValue Store = DAG.getStore(Val.getValue(1), dl, Val, Addr,
                                     MachinePointerInfo(FuncArg, j),
                                     false, false, 0);
        MemOps.push_back(Store);
        ++GPR_idx;
      }
      ArgOffset += ArgSize;
      continue;
    }

    switch (ObjectVT.getSimpleVT().SimpleTy) {
    default: llvm_unreachable("Unhandled argument type!");
    case MVT::i1:
    case MVT::i32:
    case MVT::i64:
      // These can be scalar arguments or elements of an integer array type
      // passed directly.  Clang may use those instead of "byval" aggregate
      // types to avoid forcing arguments to memory unnecessarily.
      if (GPR_idx != Num_GPR_Regs) {
        unsigned VReg = MF.addLiveIn(GPR[GPR_idx], &PPC::G8RCRegClass);
        ArgVal = DAG.getCopyFromReg(Chain, dl, VReg, MVT::i64);

        if (ObjectVT == MVT::i32 || ObjectVT == MVT::i1)
          // PPC64 passes i8, i16, and i32 values in i64 registers. Promote
          // value to MVT::i64 and then truncate to the correct register size.
          ArgVal = extendArgForPPC64(Flags, ObjectVT, DAG, ArgVal, dl);
      } else {
        needsLoad = true;
        ArgSize = PtrByteSize;
      }
      ArgOffset += 8;
      break;

    case MVT::f32:
    case MVT::f64:
      // These can be scalar arguments or elements of a float array type
      // passed directly.  The latter are used to implement ELFv2 homogenous
      // float aggregates.
      if (FPR_idx != Num_FPR_Regs) {
        unsigned VReg;

        if (ObjectVT == MVT::f32)
          VReg = MF.addLiveIn(FPR[FPR_idx], &PPC::F4RCRegClass);
        else
          VReg = MF.addLiveIn(FPR[FPR_idx], Subtarget.hasVSX() ?
                                            &PPC::VSFRCRegClass :
                                            &PPC::F8RCRegClass);

        ArgVal = DAG.getCopyFromReg(Chain, dl, VReg, ObjectVT);
        ++FPR_idx;
      } else if (GPR_idx != Num_GPR_Regs) {
        // This can only ever happen in the presence of f32 array types,
        // since otherwise we never run out of FPRs before running out
        // of GPRs.
        unsigned VReg = MF.addLiveIn(GPR[GPR_idx], &PPC::G8RCRegClass);
        ArgVal = DAG.getCopyFromReg(Chain, dl, VReg, MVT::i64);

        if (ObjectVT == MVT::f32) {
          if ((ArgOffset % PtrByteSize) == (isLittleEndian ? 4 : 0))
            ArgVal = DAG.getNode(ISD::SRL, dl, MVT::i64, ArgVal,
                                 DAG.getConstant(32, MVT::i32));
          ArgVal = DAG.getNode(ISD::TRUNCATE, dl, MVT::i32, ArgVal);
        }

        ArgVal = DAG.getNode(ISD::BITCAST, dl, ObjectVT, ArgVal);
      } else {
        needsLoad = true;
      }

      // When passing an array of floats, the array occupies consecutive
      // space in the argument area; only round up to the next doubleword
      // at the end of the array.  Otherwise, each float takes 8 bytes.
      ArgSize = Flags.isInConsecutiveRegs() ? ObjSize : PtrByteSize;
      ArgOffset += ArgSize;
      if (Flags.isInConsecutiveRegsLast())
        ArgOffset = ((ArgOffset + PtrByteSize - 1)/PtrByteSize) * PtrByteSize;
      break;
    case MVT::v4f32:
    case MVT::v4i32:
    case MVT::v8i16:
    case MVT::v16i8:
    case MVT::v2f64:
    case MVT::v2i64:
      // These can be scalar arguments or elements of a vector array type
      // passed directly.  The latter are used to implement ELFv2 homogenous
      // vector aggregates.
      if (VR_idx != Num_VR_Regs) {
        unsigned VReg = (ObjectVT == MVT::v2f64 || ObjectVT == MVT::v2i64) ?
                        MF.addLiveIn(VSRH[VR_idx], &PPC::VSHRCRegClass) :
                        MF.addLiveIn(VR[VR_idx], &PPC::VRRCRegClass);
        ArgVal = DAG.getCopyFromReg(Chain, dl, VReg, ObjectVT);
        ++VR_idx;
      } else {
        needsLoad = true;
      }
      ArgOffset += 16;
      break;
    }

    // We need to load the argument to a virtual register if we determined
    // above that we ran out of physical registers of the appropriate type.
    if (needsLoad) {
      if (ObjSize < ArgSize && !isLittleEndian)
        CurArgOffset += ArgSize - ObjSize;
      int FI = MFI->CreateFixedObject(ObjSize, CurArgOffset, isImmutable);
      SDValue FIN = DAG.getFrameIndex(FI, PtrVT);
      ArgVal = DAG.getLoad(ObjectVT, dl, Chain, FIN, MachinePointerInfo(),
                           false, false, false, 0);
    }

    InVals.push_back(ArgVal);
  }

  // Area that is at least reserved in the caller of this function.
  unsigned MinReservedArea;
  if (HasParameterArea)
    MinReservedArea = std::max(ArgOffset, LinkageSize + 8 * PtrByteSize);
  else
    MinReservedArea = LinkageSize;

  // Set the size that is at least reserved in caller of this function.  Tail
  // call optimized functions' reserved stack space needs to be aligned so that
  // taking the difference between two stack areas will result in an aligned
  // stack.
  MinReservedArea = EnsureStackAlignment(MF.getTarget(), MinReservedArea);
  FuncInfo->setMinReservedArea(MinReservedArea);

  // If the function takes variable number of arguments, make a frame index for
  // the start of the first vararg value... for expansion of llvm.va_start.
  if (isVarArg) {
    int Depth = ArgOffset;

    FuncInfo->setVarArgsFrameIndex(
      MFI->CreateFixedObject(PtrByteSize, Depth, true));
    SDValue FIN = DAG.getFrameIndex(FuncInfo->getVarArgsFrameIndex(), PtrVT);

    // If this function is vararg, store any remaining integer argument regs
    // to their spots on the stack so that they may be loaded by deferencing the
    // result of va_next.
    for (GPR_idx = (ArgOffset - LinkageSize) / PtrByteSize;
         GPR_idx < Num_GPR_Regs; ++GPR_idx) {
      unsigned VReg = MF.addLiveIn(GPR[GPR_idx], &PPC::G8RCRegClass);
      SDValue Val = DAG.getCopyFromReg(Chain, dl, VReg, PtrVT);
      SDValue Store = DAG.getStore(Val.getValue(1), dl, Val, FIN,
                                   MachinePointerInfo(), false, false, 0);
      MemOps.push_back(Store);
      // Increment the address by four for the next argument to store
      SDValue PtrOff = DAG.getConstant(PtrByteSize, PtrVT);
      FIN = DAG.getNode(ISD::ADD, dl, PtrOff.getValueType(), FIN, PtrOff);
    }
  }

  if (!MemOps.empty())
    Chain = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, MemOps);

  return Chain;
}

SDValue
PPCTargetLowering::LowerFormalArguments_Darwin(
                                      SDValue Chain,
                                      CallingConv::ID CallConv, bool isVarArg,
                                      const SmallVectorImpl<ISD::InputArg>
                                        &Ins,
                                      SDLoc dl, SelectionDAG &DAG,
                                      SmallVectorImpl<SDValue> &InVals) const {
  // TODO: add description of PPC stack frame format, or at least some docs.
  //
  MachineFunction &MF = DAG.getMachineFunction();
  MachineFrameInfo *MFI = MF.getFrameInfo();
  PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>();

  EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();
  bool isPPC64 = PtrVT == MVT::i64;
  // Potential tail calls could cause overwriting of argument stack slots.
  bool isImmutable = !(getTargetMachine().Options.GuaranteedTailCallOpt &&
                       (CallConv == CallingConv::Fast));
  unsigned PtrByteSize = isPPC64 ? 8 : 4;

  unsigned LinkageSize = PPCFrameLowering::getLinkageSize(isPPC64, true,
                                                          false);
  unsigned ArgOffset = LinkageSize;
  // Area that is at least reserved in caller of this function.
  unsigned MinReservedArea = ArgOffset;

  static const MCPhysReg GPR_32[] = {           // 32-bit registers.
    PPC::R3, PPC::R4, PPC::R5, PPC::R6,
    PPC::R7, PPC::R8, PPC::R9, PPC::R10,
  };
  static const MCPhysReg GPR_64[] = {           // 64-bit registers.
    PPC::X3, PPC::X4, PPC::X5, PPC::X6,
    PPC::X7, PPC::X8, PPC::X9, PPC::X10,
  };

  static const MCPhysReg *FPR = GetFPR();

  static const MCPhysReg VR[] = {
    PPC::V2, PPC::V3, PPC::V4, PPC::V5, PPC::V6, PPC::V7, PPC::V8,
    PPC::V9, PPC::V10, PPC::V11, PPC::V12, PPC::V13
  };

  const unsigned Num_GPR_Regs = array_lengthof(GPR_32);
  const unsigned Num_FPR_Regs = 13;
  const unsigned Num_VR_Regs  = array_lengthof( VR);

  unsigned GPR_idx = 0, FPR_idx = 0, VR_idx = 0;

  const MCPhysReg *GPR = isPPC64 ? GPR_64 : GPR_32;

  // In 32-bit non-varargs functions, the stack space for vectors is after the
  // stack space for non-vectors.  We do not use this space unless we have
  // too many vectors to fit in registers, something that only occurs in
  // constructed examples:), but we have to walk the arglist to figure
  // that out...for the pathological case, compute VecArgOffset as the
  // start of the vector parameter area.  Computing VecArgOffset is the
  // entire point of the following loop.
  unsigned VecArgOffset = ArgOffset;
  if (!isVarArg && !isPPC64) {
    for (unsigned ArgNo = 0, e = Ins.size(); ArgNo != e;
         ++ArgNo) {
      EVT ObjectVT = Ins[ArgNo].VT;
      ISD::ArgFlagsTy Flags = Ins[ArgNo].Flags;

      if (Flags.isByVal()) {
        // ObjSize is the true size, ArgSize rounded up to multiple of regs.
        unsigned ObjSize = Flags.getByValSize();
        unsigned ArgSize =
                ((ObjSize + PtrByteSize - 1)/PtrByteSize) * PtrByteSize;
        VecArgOffset += ArgSize;
        continue;
      }

      switch(ObjectVT.getSimpleVT().SimpleTy) {
      default: llvm_unreachable("Unhandled argument type!");
      case MVT::i1:
      case MVT::i32:
      case MVT::f32:
        VecArgOffset += 4;
        break;
      case MVT::i64:  // PPC64
      case MVT::f64:
        // FIXME: We are guaranteed to be !isPPC64 at this point.
        // Does MVT::i64 apply?
        VecArgOffset += 8;
        break;
      case MVT::v4f32:
      case MVT::v4i32:
      case MVT::v8i16:
      case MVT::v16i8:
        // Nothing to do, we're only looking at Nonvector args here.
        break;
      }
    }
  }
  // We've found where the vector parameter area in memory is.  Skip the
  // first 12 parameters; these don't use that memory.
  VecArgOffset = ((VecArgOffset+15)/16)*16;
  VecArgOffset += 12*16;

  // Add DAG nodes to load the arguments or copy them out of registers.  On
  // entry to a function on PPC, the arguments start after the linkage area,
  // although the first ones are often in registers.

  SmallVector<SDValue, 8> MemOps;
  unsigned nAltivecParamsAtEnd = 0;
  Function::const_arg_iterator FuncArg = MF.getFunction()->arg_begin();
  unsigned CurArgIdx = 0;
  for (unsigned ArgNo = 0, e = Ins.size(); ArgNo != e; ++ArgNo) {
    SDValue ArgVal;
    bool needsLoad = false;
    EVT ObjectVT = Ins[ArgNo].VT;
    unsigned ObjSize = ObjectVT.getSizeInBits()/8;
    unsigned ArgSize = ObjSize;
    ISD::ArgFlagsTy Flags = Ins[ArgNo].Flags;
    std::advance(FuncArg, Ins[ArgNo].OrigArgIndex - CurArgIdx);
    CurArgIdx = Ins[ArgNo].OrigArgIndex;

    unsigned CurArgOffset = ArgOffset;

    // Varargs or 64 bit Altivec parameters are padded to a 16 byte boundary.
    if (ObjectVT==MVT::v4f32 || ObjectVT==MVT::v4i32 ||
        ObjectVT==MVT::v8i16 || ObjectVT==MVT::v16i8) {
      if (isVarArg || isPPC64) {
        MinReservedArea = ((MinReservedArea+15)/16)*16;
        MinReservedArea += CalculateStackSlotSize(ObjectVT,
                                                  Flags,
                                                  PtrByteSize);
      } else  nAltivecParamsAtEnd++;
    } else
      // Calculate min reserved area.
      MinReservedArea += CalculateStackSlotSize(Ins[ArgNo].VT,
                                                Flags,
                                                PtrByteSize);

    // FIXME the codegen can be much improved in some cases.
    // We do not have to keep everything in memory.
    if (Flags.isByVal()) {
      // ObjSize is the true size, ArgSize rounded up to multiple of registers.
      ObjSize = Flags.getByValSize();
      ArgSize = ((ObjSize + PtrByteSize - 1)/PtrByteSize) * PtrByteSize;
      // Objects of size 1 and 2 are right justified, everything else is
      // left justified.  This means the memory address is adjusted forwards.
      if (ObjSize==1 || ObjSize==2) {
        CurArgOffset = CurArgOffset + (4 - ObjSize);
      }
      // The value of the object is its address.
      int FI = MFI->CreateFixedObject(ObjSize, CurArgOffset, true);
      SDValue FIN = DAG.getFrameIndex(FI, PtrVT);
      InVals.push_back(FIN);
      if (ObjSize==1 || ObjSize==2) {
        if (GPR_idx != Num_GPR_Regs) {
          unsigned VReg;
          if (isPPC64)
            VReg = MF.addLiveIn(GPR[GPR_idx], &PPC::G8RCRegClass);
          else
            VReg = MF.addLiveIn(GPR[GPR_idx], &PPC::GPRCRegClass);
          SDValue Val = DAG.getCopyFromReg(Chain, dl, VReg, PtrVT);
          EVT ObjType = ObjSize == 1 ? MVT::i8 : MVT::i16;
          SDValue Store = DAG.getTruncStore(Val.getValue(1), dl, Val, FIN,
                                            MachinePointerInfo(FuncArg),
                                            ObjType, false, false, 0);
          MemOps.push_back(Store);
          ++GPR_idx;
        }

        ArgOffset += PtrByteSize;

        continue;
      }
      for (unsigned j = 0; j < ArgSize; j += PtrByteSize) {
        // Store whatever pieces of the object are in registers
        // to memory.  ArgOffset will be the address of the beginning
        // of the object.
        if (GPR_idx != Num_GPR_Regs) {
          unsigned VReg;
          if (isPPC64)
            VReg = MF.addLiveIn(GPR[GPR_idx], &PPC::G8RCRegClass);
          else
            VReg = MF.addLiveIn(GPR[GPR_idx], &PPC::GPRCRegClass);
          int FI = MFI->CreateFixedObject(PtrByteSize, ArgOffset, true);
          SDValue FIN = DAG.getFrameIndex(FI, PtrVT);
          SDValue Val = DAG.getCopyFromReg(Chain, dl, VReg, PtrVT);
          SDValue Store = DAG.getStore(Val.getValue(1), dl, Val, FIN,
                                       MachinePointerInfo(FuncArg, j),
                                       false, false, 0);
          MemOps.push_back(Store);
          ++GPR_idx;
          ArgOffset += PtrByteSize;
        } else {
          ArgOffset += ArgSize - (ArgOffset-CurArgOffset);
          break;
        }
      }
      continue;
    }

    switch (ObjectVT.getSimpleVT().SimpleTy) {
    default: llvm_unreachable("Unhandled argument type!");
    case MVT::i1:
    case MVT::i32:
      if (!isPPC64) {
        if (GPR_idx != Num_GPR_Regs) {
          unsigned VReg = MF.addLiveIn(GPR[GPR_idx], &PPC::GPRCRegClass);
          ArgVal = DAG.getCopyFromReg(Chain, dl, VReg, MVT::i32);

          if (ObjectVT == MVT::i1)
            ArgVal = DAG.getNode(ISD::TRUNCATE, dl, MVT::i1, ArgVal);

          ++GPR_idx;
        } else {
          needsLoad = true;
          ArgSize = PtrByteSize;
        }
        // All int arguments reserve stack space in the Darwin ABI.
        ArgOffset += PtrByteSize;
        break;
      }
      // FALLTHROUGH
    case MVT::i64:  // PPC64
      if (GPR_idx != Num_GPR_Regs) {
        unsigned VReg = MF.addLiveIn(GPR[GPR_idx], &PPC::G8RCRegClass);
        ArgVal = DAG.getCopyFromReg(Chain, dl, VReg, MVT::i64);

        if (ObjectVT == MVT::i32 || ObjectVT == MVT::i1)
          // PPC64 passes i8, i16, and i32 values in i64 registers. Promote
          // value to MVT::i64 and then truncate to the correct register size.
          ArgVal = extendArgForPPC64(Flags, ObjectVT, DAG, ArgVal, dl);

        ++GPR_idx;
      } else {
        needsLoad = true;
        ArgSize = PtrByteSize;
      }
      // All int arguments reserve stack space in the Darwin ABI.
      ArgOffset += 8;
      break;

    case MVT::f32:
    case MVT::f64:
      // Every 4 bytes of argument space consumes one of the GPRs available for
      // argument passing.
      if (GPR_idx != Num_GPR_Regs) {
        ++GPR_idx;
        if (ObjSize == 8 && GPR_idx != Num_GPR_Regs && !isPPC64)
          ++GPR_idx;
      }
      if (FPR_idx != Num_FPR_Regs) {
        unsigned VReg;

        if (ObjectVT == MVT::f32)
          VReg = MF.addLiveIn(FPR[FPR_idx], &PPC::F4RCRegClass);
        else
          VReg = MF.addLiveIn(FPR[FPR_idx], &PPC::F8RCRegClass);

        ArgVal = DAG.getCopyFromReg(Chain, dl, VReg, ObjectVT);
        ++FPR_idx;
      } else {
        needsLoad = true;
      }

      // All FP arguments reserve stack space in the Darwin ABI.
      ArgOffset += isPPC64 ? 8 : ObjSize;
      break;
    case MVT::v4f32:
    case MVT::v4i32:
    case MVT::v8i16:
    case MVT::v16i8:
      // Note that vector arguments in registers don't reserve stack space,
      // except in varargs functions.
      if (VR_idx != Num_VR_Regs) {
        unsigned VReg = MF.addLiveIn(VR[VR_idx], &PPC::VRRCRegClass);
        ArgVal = DAG.getCopyFromReg(Chain, dl, VReg, ObjectVT);
        if (isVarArg) {
          while ((ArgOffset % 16) != 0) {
            ArgOffset += PtrByteSize;
            if (GPR_idx != Num_GPR_Regs)
              GPR_idx++;
          }
          ArgOffset += 16;
          GPR_idx = std::min(GPR_idx+4, Num_GPR_Regs); // FIXME correct for ppc64?
        }
        ++VR_idx;
      } else {
        if (!isVarArg && !isPPC64) {
          // Vectors go after all the nonvectors.
          CurArgOffset = VecArgOffset;
          VecArgOffset += 16;
        } else {
          // Vectors are aligned.
          ArgOffset = ((ArgOffset+15)/16)*16;
          CurArgOffset = ArgOffset;
          ArgOffset += 16;
        }
        needsLoad = true;
      }
      break;
    }

    // We need to load the argument to a virtual register if we determined above
    // that we ran out of physical registers of the appropriate type.
    if (needsLoad) {
      int FI = MFI->CreateFixedObject(ObjSize,
                                      CurArgOffset + (ArgSize - ObjSize),
                                      isImmutable);
      SDValue FIN = DAG.getFrameIndex(FI, PtrVT);
      ArgVal = DAG.getLoad(ObjectVT, dl, Chain, FIN, MachinePointerInfo(),
                           false, false, false, 0);
    }

    InVals.push_back(ArgVal);
  }

  // Allow for Altivec parameters at the end, if needed.
  if (nAltivecParamsAtEnd) {
    MinReservedArea = ((MinReservedArea+15)/16)*16;
    MinReservedArea += 16*nAltivecParamsAtEnd;
  }

  // Area that is at least reserved in the caller of this function.
  MinReservedArea = std::max(MinReservedArea, LinkageSize + 8 * PtrByteSize);

  // Set the size that is at least reserved in caller of this function.  Tail
  // call optimized functions' reserved stack space needs to be aligned so that
  // taking the difference between two stack areas will result in an aligned
  // stack.
  MinReservedArea = EnsureStackAlignment(MF.getTarget(), MinReservedArea);
  FuncInfo->setMinReservedArea(MinReservedArea);

  // If the function takes variable number of arguments, make a frame index for
  // the start of the first vararg value... for expansion of llvm.va_start.
  if (isVarArg) {
    int Depth = ArgOffset;

    FuncInfo->setVarArgsFrameIndex(
      MFI->CreateFixedObject(PtrVT.getSizeInBits()/8,
                             Depth, true));
    SDValue FIN = DAG.getFrameIndex(FuncInfo->getVarArgsFrameIndex(), PtrVT);

    // If this function is vararg, store any remaining integer argument regs
    // to their spots on the stack so that they may be loaded by deferencing the
    // result of va_next.
    for (; GPR_idx != Num_GPR_Regs; ++GPR_idx) {
      unsigned VReg;

      if (isPPC64)
        VReg = MF.addLiveIn(GPR[GPR_idx], &PPC::G8RCRegClass);
      else
        VReg = MF.addLiveIn(GPR[GPR_idx], &PPC::GPRCRegClass);

      SDValue Val = DAG.getCopyFromReg(Chain, dl, VReg, PtrVT);
      SDValue Store = DAG.getStore(Val.getValue(1), dl, Val, FIN,
                                   MachinePointerInfo(), false, false, 0);
      MemOps.push_back(Store);
      // Increment the address by four for the next argument to store
      SDValue PtrOff = DAG.getConstant(PtrVT.getSizeInBits()/8, PtrVT);
      FIN = DAG.getNode(ISD::ADD, dl, PtrOff.getValueType(), FIN, PtrOff);
    }
  }

  if (!MemOps.empty())
    Chain = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, MemOps);

  return Chain;
}

/// CalculateTailCallSPDiff - Get the amount the stack pointer has to be
/// adjusted to accommodate the arguments for the tailcall.
static int CalculateTailCallSPDiff(SelectionDAG& DAG, bool isTailCall,
                                   unsigned ParamSize) {

  if (!isTailCall) return 0;

  PPCFunctionInfo *FI = DAG.getMachineFunction().getInfo<PPCFunctionInfo>();
  unsigned CallerMinReservedArea = FI->getMinReservedArea();
  int SPDiff = (int)CallerMinReservedArea - (int)ParamSize;
  // Remember only if the new adjustement is bigger.
  if (SPDiff < FI->getTailCallSPDelta())
    FI->setTailCallSPDelta(SPDiff);

  return SPDiff;
}

/// IsEligibleForTailCallOptimization - Check whether the call is eligible
/// for tail call optimization. Targets which want to do tail call
/// optimization should implement this function.
bool
PPCTargetLowering::IsEligibleForTailCallOptimization(SDValue Callee,
                                                     CallingConv::ID CalleeCC,
                                                     bool isVarArg,
                                      const SmallVectorImpl<ISD::InputArg> &Ins,
                                                     SelectionDAG& DAG) const {
  if (!getTargetMachine().Options.GuaranteedTailCallOpt)
    return false;

  // Variable argument functions are not supported.
  if (isVarArg)
    return false;

  MachineFunction &MF = DAG.getMachineFunction();
  CallingConv::ID CallerCC = MF.getFunction()->getCallingConv();
  if (CalleeCC == CallingConv::Fast && CallerCC == CalleeCC) {
    // Functions containing by val parameters are not supported.
    for (unsigned i = 0; i != Ins.size(); i++) {
       ISD::ArgFlagsTy Flags = Ins[i].Flags;
       if (Flags.isByVal()) return false;
    }

    // Non-PIC/GOT tail calls are supported.
    if (getTargetMachine().getRelocationModel() != Reloc::PIC_)
      return true;

    // At the moment we can only do local tail calls (in same module, hidden
    // or protected) if we are generating PIC.
    if (GlobalAddressSDNode *G = dyn_cast<GlobalAddressSDNode>(Callee))
      return G->getGlobal()->hasHiddenVisibility()
          || G->getGlobal()->hasProtectedVisibility();
  }

  return false;
}

/// isCallCompatibleAddress - Return the immediate to use if the specified
/// 32-bit value is representable in the immediate field of a BxA instruction.
static SDNode *isBLACompatibleAddress(SDValue Op, SelectionDAG &DAG) {
  ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op);
  if (!C) return nullptr;

  int Addr = C->getZExtValue();
  if ((Addr & 3) != 0 ||  // Low 2 bits are implicitly zero.
      SignExtend32<26>(Addr) != Addr)
    return nullptr;  // Top 6 bits have to be sext of immediate.

  return DAG.getConstant((int)C->getZExtValue() >> 2,
                         DAG.getTargetLoweringInfo().getPointerTy()).getNode();
}

namespace {

struct TailCallArgumentInfo {
  SDValue Arg;
  SDValue FrameIdxOp;
  int       FrameIdx;

  TailCallArgumentInfo() : FrameIdx(0) {}
};

}

/// StoreTailCallArgumentsToStackSlot - Stores arguments to their stack slot.
static void
StoreTailCallArgumentsToStackSlot(SelectionDAG &DAG,
                                           SDValue Chain,
                   const SmallVectorImpl<TailCallArgumentInfo> &TailCallArgs,
                   SmallVectorImpl<SDValue> &MemOpChains,
                   SDLoc dl) {
  for (unsigned i = 0, e = TailCallArgs.size(); i != e; ++i) {
    SDValue Arg = TailCallArgs[i].Arg;
    SDValue FIN = TailCallArgs[i].FrameIdxOp;
    int FI = TailCallArgs[i].FrameIdx;
    // Store relative to framepointer.
    MemOpChains.push_back(DAG.getStore(Chain, dl, Arg, FIN,
                                       MachinePointerInfo::getFixedStack(FI),
                                       false, false, 0));
  }
}

/// EmitTailCallStoreFPAndRetAddr - Move the frame pointer and return address to
/// the appropriate stack slot for the tail call optimized function call.
static SDValue EmitTailCallStoreFPAndRetAddr(SelectionDAG &DAG,
                                               MachineFunction &MF,
                                               SDValue Chain,
                                               SDValue OldRetAddr,
                                               SDValue OldFP,
                                               int SPDiff,
                                               bool isPPC64,
                                               bool isDarwinABI,
                                               SDLoc dl) {
  if (SPDiff) {
    // Calculate the new stack slot for the return address.
    int SlotSize = isPPC64 ? 8 : 4;
    int NewRetAddrLoc = SPDiff + PPCFrameLowering::getReturnSaveOffset(isPPC64,
                                                                   isDarwinABI);
    int NewRetAddr = MF.getFrameInfo()->CreateFixedObject(SlotSize,
                                                          NewRetAddrLoc, true);
    EVT VT = isPPC64 ? MVT::i64 : MVT::i32;
    SDValue NewRetAddrFrIdx = DAG.getFrameIndex(NewRetAddr, VT);
    Chain = DAG.getStore(Chain, dl, OldRetAddr, NewRetAddrFrIdx,
                         MachinePointerInfo::getFixedStack(NewRetAddr),
                         false, false, 0);

    // When using the 32/64-bit SVR4 ABI there is no need to move the FP stack
    // slot as the FP is never overwritten.
    if (isDarwinABI) {
      int NewFPLoc =
        SPDiff + PPCFrameLowering::getFramePointerSaveOffset(isPPC64, isDarwinABI);
      int NewFPIdx = MF.getFrameInfo()->CreateFixedObject(SlotSize, NewFPLoc,
                                                          true);
      SDValue NewFramePtrIdx = DAG.getFrameIndex(NewFPIdx, VT);
      Chain = DAG.getStore(Chain, dl, OldFP, NewFramePtrIdx,
                           MachinePointerInfo::getFixedStack(NewFPIdx),
                           false, false, 0);
    }
  }
  return Chain;
}

/// CalculateTailCallArgDest - Remember Argument for later processing. Calculate
/// the position of the argument.
static void
CalculateTailCallArgDest(SelectionDAG &DAG, MachineFunction &MF, bool isPPC64,
                         SDValue Arg, int SPDiff, unsigned ArgOffset,
                     SmallVectorImpl<TailCallArgumentInfo>& TailCallArguments) {
  int Offset = ArgOffset + SPDiff;
  uint32_t OpSize = (Arg.getValueType().getSizeInBits()+7)/8;
  int FI = MF.getFrameInfo()->CreateFixedObject(OpSize, Offset, true);
  EVT VT = isPPC64 ? MVT::i64 : MVT::i32;
  SDValue FIN = DAG.getFrameIndex(FI, VT);
  TailCallArgumentInfo Info;
  Info.Arg = Arg;
  Info.FrameIdxOp = FIN;
  Info.FrameIdx = FI;
  TailCallArguments.push_back(Info);
}

/// EmitTCFPAndRetAddrLoad - Emit load from frame pointer and return address
/// stack slot. Returns the chain as result and the loaded frame pointers in
/// LROpOut/FPOpout. Used when tail calling.
SDValue PPCTargetLowering::EmitTailCallLoadFPAndRetAddr(SelectionDAG & DAG,
                                                        int SPDiff,
                                                        SDValue Chain,
                                                        SDValue &LROpOut,
                                                        SDValue &FPOpOut,
                                                        bool isDarwinABI,
                                                        SDLoc dl) const {
  if (SPDiff) {
    // Load the LR and FP stack slot for later adjusting.
    EVT VT = Subtarget.isPPC64() ? MVT::i64 : MVT::i32;
    LROpOut = getReturnAddrFrameIndex(DAG);
    LROpOut = DAG.getLoad(VT, dl, Chain, LROpOut, MachinePointerInfo(),
                          false, false, false, 0);
    Chain = SDValue(LROpOut.getNode(), 1);

    // When using the 32/64-bit SVR4 ABI there is no need to load the FP stack
    // slot as the FP is never overwritten.
    if (isDarwinABI) {
      FPOpOut = getFramePointerFrameIndex(DAG);
      FPOpOut = DAG.getLoad(VT, dl, Chain, FPOpOut, MachinePointerInfo(),
                            false, false, false, 0);
      Chain = SDValue(FPOpOut.getNode(), 1);
    }
  }
  return Chain;
}

/// CreateCopyOfByValArgument - Make a copy of an aggregate at address specified
/// by "Src" to address "Dst" of size "Size".  Alignment information is
/// specified by the specific parameter attribute. The copy will be passed as
/// a byval function parameter.
/// Sometimes what we are copying is the end of a larger object, the part that
/// does not fit in registers.
static SDValue
CreateCopyOfByValArgument(SDValue Src, SDValue Dst, SDValue Chain,
                          ISD::ArgFlagsTy Flags, SelectionDAG &DAG,
                          SDLoc dl) {
  SDValue SizeNode = DAG.getConstant(Flags.getByValSize(), MVT::i32);
  return DAG.getMemcpy(Chain, dl, Dst, Src, SizeNode, Flags.getByValAlign(),
                       false, false, MachinePointerInfo(),
                       MachinePointerInfo());
}

/// LowerMemOpCallTo - Store the argument to the stack or remember it in case of
/// tail calls.
static void
LowerMemOpCallTo(SelectionDAG &DAG, MachineFunction &MF, SDValue Chain,
                 SDValue Arg, SDValue PtrOff, int SPDiff,
                 unsigned ArgOffset, bool isPPC64, bool isTailCall,
                 bool isVector, SmallVectorImpl<SDValue> &MemOpChains,
                 SmallVectorImpl<TailCallArgumentInfo> &TailCallArguments,
                 SDLoc dl) {
  EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();
  if (!isTailCall) {
    if (isVector) {
      SDValue StackPtr;
      if (isPPC64)
        StackPtr = DAG.getRegister(PPC::X1, MVT::i64);
      else
        StackPtr = DAG.getRegister(PPC::R1, MVT::i32);
      PtrOff = DAG.getNode(ISD::ADD, dl, PtrVT, StackPtr,
                           DAG.getConstant(ArgOffset, PtrVT));
    }
    MemOpChains.push_back(DAG.getStore(Chain, dl, Arg, PtrOff,
                                       MachinePointerInfo(), false, false, 0));
  // Calculate and remember argument location.
  } else CalculateTailCallArgDest(DAG, MF, isPPC64, Arg, SPDiff, ArgOffset,
                                  TailCallArguments);
}

static
void PrepareTailCall(SelectionDAG &DAG, SDValue &InFlag, SDValue &Chain,
                     SDLoc dl, bool isPPC64, int SPDiff, unsigned NumBytes,
                     SDValue LROp, SDValue FPOp, bool isDarwinABI,
                     SmallVectorImpl<TailCallArgumentInfo> &TailCallArguments) {
  MachineFunction &MF = DAG.getMachineFunction();

  // Emit a sequence of copyto/copyfrom virtual registers for arguments that
  // might overwrite each other in case of tail call optimization.
  SmallVector<SDValue, 8> MemOpChains2;
  // Do not flag preceding copytoreg stuff together with the following stuff.
  InFlag = SDValue();
  StoreTailCallArgumentsToStackSlot(DAG, Chain, TailCallArguments,
                                    MemOpChains2, dl);
  if (!MemOpChains2.empty())
    Chain = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, MemOpChains2);

  // Store the return address to the appropriate stack slot.
  Chain = EmitTailCallStoreFPAndRetAddr(DAG, MF, Chain, LROp, FPOp, SPDiff,
                                        isPPC64, isDarwinABI, dl);

  // Emit callseq_end just before tailcall node.
  Chain = DAG.getCALLSEQ_END(Chain, DAG.getIntPtrConstant(NumBytes, true),
                             DAG.getIntPtrConstant(0, true), InFlag, dl);
  InFlag = Chain.getValue(1);
}

static
unsigned PrepareCall(SelectionDAG &DAG, SDValue &Callee, SDValue &InFlag,
                     SDValue &Chain, SDLoc dl, int SPDiff, bool isTailCall,
                     SmallVectorImpl<std::pair<unsigned, SDValue> > &RegsToPass,
                     SmallVectorImpl<SDValue> &Ops, std::vector<EVT> &NodeTys,
                     const PPCSubtarget &Subtarget) {

  bool isPPC64 = Subtarget.isPPC64();
  bool isSVR4ABI = Subtarget.isSVR4ABI();
  bool isELFv2ABI = Subtarget.isELFv2ABI();

  EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();
  NodeTys.push_back(MVT::Other);   // Returns a chain
  NodeTys.push_back(MVT::Glue);    // Returns a flag for retval copy to use.

  unsigned CallOpc = PPCISD::CALL;

  bool needIndirectCall = true;
  if (!isSVR4ABI || !isPPC64)
    if (SDNode *Dest = isBLACompatibleAddress(Callee, DAG)) {
      // If this is an absolute destination address, use the munged value.
      Callee = SDValue(Dest, 0);
      needIndirectCall = false;
    }

  if (GlobalAddressSDNode *G = dyn_cast<GlobalAddressSDNode>(Callee)) {
    // XXX Work around for http://llvm.org/bugs/show_bug.cgi?id=5201
    // Use indirect calls for ALL functions calls in JIT mode, since the
    // far-call stubs may be outside relocation limits for a BL instruction.
    if (!DAG.getTarget().getSubtarget<PPCSubtarget>().isJITCodeModel()) {
      unsigned OpFlags = 0;
      if ((DAG.getTarget().getRelocationModel() != Reloc::Static &&
          (Subtarget.getTargetTriple().isMacOSX() &&
           Subtarget.getTargetTriple().isMacOSXVersionLT(10, 5)) &&
          (G->getGlobal()->isDeclaration() ||
           G->getGlobal()->isWeakForLinker())) ||
          (Subtarget.isTargetELF() && !isPPC64 &&
           !G->getGlobal()->hasLocalLinkage() &&
           DAG.getTarget().getRelocationModel() == Reloc::PIC_)) {
        // PC-relative references to external symbols should go through $stub,
        // unless we're building with the leopard linker or later, which
        // automatically synthesizes these stubs.
        OpFlags = PPCII::MO_PLT_OR_STUB;
      }

      // If the callee is a GlobalAddress/ExternalSymbol node (quite common,
      // every direct call is) turn it into a TargetGlobalAddress /
      // TargetExternalSymbol node so that legalize doesn't hack it.
      Callee = DAG.getTargetGlobalAddress(G->getGlobal(), dl,
                                          Callee.getValueType(),
                                          0, OpFlags);
      needIndirectCall = false;
    }
  }

  if (ExternalSymbolSDNode *S = dyn_cast<ExternalSymbolSDNode>(Callee)) {
    unsigned char OpFlags = 0;

    if ((DAG.getTarget().getRelocationModel() != Reloc::Static &&
         (Subtarget.getTargetTriple().isMacOSX() &&
          Subtarget.getTargetTriple().isMacOSXVersionLT(10, 5))) ||
        (Subtarget.isTargetELF() && !isPPC64 &&
         DAG.getTarget().getRelocationModel() == Reloc::PIC_)	) {
      // PC-relative references to external symbols should go through $stub,
      // unless we're building with the leopard linker or later, which
      // automatically synthesizes these stubs.
      OpFlags = PPCII::MO_PLT_OR_STUB;
    }

    Callee = DAG.getTargetExternalSymbol(S->getSymbol(), Callee.getValueType(),
                                         OpFlags);
    needIndirectCall = false;
  }

  if (needIndirectCall) {
    // Otherwise, this is an indirect call.  We have to use a MTCTR/BCTRL pair
    // to do the call, we can't use PPCISD::CALL.
    SDValue MTCTROps[] = {Chain, Callee, InFlag};

    if (isSVR4ABI && isPPC64 && !isELFv2ABI) {
      // Function pointers in the 64-bit SVR4 ABI do not point to the function
      // entry point, but to the function descriptor (the function entry point
      // address is part of the function descriptor though).
      // The function descriptor is a three doubleword structure with the
      // following fields: function entry point, TOC base address and
      // environment pointer.
      // Thus for a call through a function pointer, the following actions need
      // to be performed:
      //   1. Save the TOC of the caller in the TOC save area of its stack
      //      frame (this is done in LowerCall_Darwin() or LowerCall_64SVR4()).
      //   2. Load the address of the function entry point from the function
      //      descriptor.
      //   3. Load the TOC of the callee from the function descriptor into r2.
      //   4. Load the environment pointer from the function descriptor into
      //      r11.
      //   5. Branch to the function entry point address.
      //   6. On return of the callee, the TOC of the caller needs to be
      //      restored (this is done in FinishCall()).
      //
      // All those operations are flagged together to ensure that no other
      // operations can be scheduled in between. E.g. without flagging the
      // operations together, a TOC access in the caller could be scheduled
      // between the load of the callee TOC and the branch to the callee, which
      // results in the TOC access going through the TOC of the callee instead
      // of going through the TOC of the caller, which leads to incorrect code.

      // Load the address of the function entry point from the function
      // descriptor.
      SDVTList VTs = DAG.getVTList(MVT::i64, MVT::Other, MVT::Glue);
      SDValue LoadFuncPtr = DAG.getNode(PPCISD::LOAD, dl, VTs,
                              makeArrayRef(MTCTROps, InFlag.getNode() ? 3 : 2));
      Chain = LoadFuncPtr.getValue(1);
      InFlag = LoadFuncPtr.getValue(2);

      // Load environment pointer into r11.
      // Offset of the environment pointer within the function descriptor.
      SDValue PtrOff = DAG.getIntPtrConstant(16);

      SDValue AddPtr = DAG.getNode(ISD::ADD, dl, MVT::i64, Callee, PtrOff);
      SDValue LoadEnvPtr = DAG.getNode(PPCISD::LOAD, dl, VTs, Chain, AddPtr,
                                       InFlag);
      Chain = LoadEnvPtr.getValue(1);
      InFlag = LoadEnvPtr.getValue(2);

      SDValue EnvVal = DAG.getCopyToReg(Chain, dl, PPC::X11, LoadEnvPtr,
                                        InFlag);
      Chain = EnvVal.getValue(0);
      InFlag = EnvVal.getValue(1);

      // Load TOC of the callee into r2. We are using a target-specific load
      // with r2 hard coded, because the result of a target-independent load
      // would never go directly into r2, since r2 is a reserved register (which
      // prevents the register allocator from allocating it), resulting in an
      // additional register being allocated and an unnecessary move instruction
      // being generated.
      VTs = DAG.getVTList(MVT::Other, MVT::Glue);
      SDValue TOCOff = DAG.getIntPtrConstant(8);
      SDValue AddTOC = DAG.getNode(ISD::ADD, dl, MVT::i64, Callee, TOCOff);
      SDValue LoadTOCPtr = DAG.getNode(PPCISD::LOAD_TOC, dl, VTs, Chain,
                                       AddTOC, InFlag);
      Chain = LoadTOCPtr.getValue(0);
      InFlag = LoadTOCPtr.getValue(1);

      MTCTROps[0] = Chain;
      MTCTROps[1] = LoadFuncPtr;
      MTCTROps[2] = InFlag;
    }

    Chain = DAG.getNode(PPCISD::MTCTR, dl, NodeTys,
                        makeArrayRef(MTCTROps, InFlag.getNode() ? 3 : 2));
    InFlag = Chain.getValue(1);

    NodeTys.clear();
    NodeTys.push_back(MVT::Other);
    NodeTys.push_back(MVT::Glue);
    Ops.push_back(Chain);
    CallOpc = PPCISD::BCTRL;
    Callee.setNode(nullptr);
    // Add use of X11 (holding environment pointer)
    if (isSVR4ABI && isPPC64 && !isELFv2ABI)
      Ops.push_back(DAG.getRegister(PPC::X11, PtrVT));
    // Add CTR register as callee so a bctr can be emitted later.
    if (isTailCall)
      Ops.push_back(DAG.getRegister(isPPC64 ? PPC::CTR8 : PPC::CTR, PtrVT));
  }

  // If this is a direct call, pass the chain and the callee.
  if (Callee.getNode()) {
    Ops.push_back(Chain);
    Ops.push_back(Callee);
  }
  // If this is a tail call add stack pointer delta.
  if (isTailCall)
    Ops.push_back(DAG.getConstant(SPDiff, MVT::i32));

  // Add argument registers to the end of the list so that they are known live
  // into the call.
  for (unsigned i = 0, e = RegsToPass.size(); i != e; ++i)
    Ops.push_back(DAG.getRegister(RegsToPass[i].first,
                                  RegsToPass[i].second.getValueType()));

  // Direct calls in the ELFv2 ABI need the TOC register live into the call.
  if (Callee.getNode() && isELFv2ABI)
    Ops.push_back(DAG.getRegister(PPC::X2, PtrVT));

  return CallOpc;
}

static
bool isLocalCall(const SDValue &Callee)
{
  if (GlobalAddressSDNode *G = dyn_cast<GlobalAddressSDNode>(Callee))
    return !G->getGlobal()->isDeclaration() &&
           !G->getGlobal()->isWeakForLinker();
  return false;
}

SDValue
PPCTargetLowering::LowerCallResult(SDValue Chain, SDValue InFlag,
                                   CallingConv::ID CallConv, bool isVarArg,
                                   const SmallVectorImpl<ISD::InputArg> &Ins,
                                   SDLoc dl, SelectionDAG &DAG,
                                   SmallVectorImpl<SDValue> &InVals) const {

  SmallVector<CCValAssign, 16> RVLocs;
  CCState CCRetInfo(CallConv, isVarArg, DAG.getMachineFunction(), RVLocs,
                    *DAG.getContext());
  CCRetInfo.AnalyzeCallResult(Ins, RetCC_PPC);

  // Copy all of the result registers out of their specified physreg.
  for (unsigned i = 0, e = RVLocs.size(); i != e; ++i) {
    CCValAssign &VA = RVLocs[i];
    assert(VA.isRegLoc() && "Can only return in registers!");

    SDValue Val = DAG.getCopyFromReg(Chain, dl,
                                     VA.getLocReg(), VA.getLocVT(), InFlag);
    Chain = Val.getValue(1);
    InFlag = Val.getValue(2);

    switch (VA.getLocInfo()) {
    default: llvm_unreachable("Unknown loc info!");
    case CCValAssign::Full: break;
    case CCValAssign::AExt:
      Val = DAG.getNode(ISD::TRUNCATE, dl, VA.getValVT(), Val);
      break;
    case CCValAssign::ZExt:
      Val = DAG.getNode(ISD::AssertZext, dl, VA.getLocVT(), Val,
                        DAG.getValueType(VA.getValVT()));
      Val = DAG.getNode(ISD::TRUNCATE, dl, VA.getValVT(), Val);
      break;
    case CCValAssign::SExt:
      Val = DAG.getNode(ISD::AssertSext, dl, VA.getLocVT(), Val,
                        DAG.getValueType(VA.getValVT()));
      Val = DAG.getNode(ISD::TRUNCATE, dl, VA.getValVT(), Val);
      break;
    }

    InVals.push_back(Val);
  }

  return Chain;
}

SDValue
PPCTargetLowering::FinishCall(CallingConv::ID CallConv, SDLoc dl,
                              bool isTailCall, bool isVarArg,
                              SelectionDAG &DAG,
                              SmallVector<std::pair<unsigned, SDValue>, 8>
                                &RegsToPass,
                              SDValue InFlag, SDValue Chain,
                              SDValue &Callee,
                              int SPDiff, unsigned NumBytes,
                              const SmallVectorImpl<ISD::InputArg> &Ins,
                              SmallVectorImpl<SDValue> &InVals) const {

  bool isELFv2ABI = Subtarget.isELFv2ABI();
  std::vector<EVT> NodeTys;
  SmallVector<SDValue, 8> Ops;
  unsigned CallOpc = PrepareCall(DAG, Callee, InFlag, Chain, dl, SPDiff,
                                 isTailCall, RegsToPass, Ops, NodeTys,
                                 Subtarget);

  // Add implicit use of CR bit 6 for 32-bit SVR4 vararg calls
  if (isVarArg && Subtarget.isSVR4ABI() && !Subtarget.isPPC64())
    Ops.push_back(DAG.getRegister(PPC::CR1EQ, MVT::i32));

  // When performing tail call optimization the callee pops its arguments off
  // the stack. Account for this here so these bytes can be pushed back on in
  // PPCFrameLowering::eliminateCallFramePseudoInstr.
  int BytesCalleePops =
    (CallConv == CallingConv::Fast &&
     getTargetMachine().Options.GuaranteedTailCallOpt) ? NumBytes : 0;

  // Add a register mask operand representing the call-preserved registers.
  const TargetRegisterInfo *TRI =
      getTargetMachine().getSubtargetImpl()->getRegisterInfo();
  const uint32_t *Mask = TRI->getCallPreservedMask(CallConv);
  assert(Mask && "Missing call preserved mask for calling convention");
  Ops.push_back(DAG.getRegisterMask(Mask));

  if (InFlag.getNode())
    Ops.push_back(InFlag);

  // Emit tail call.
  if (isTailCall) {
    assert(((Callee.getOpcode() == ISD::Register &&
             cast<RegisterSDNode>(Callee)->getReg() == PPC::CTR) ||
            Callee.getOpcode() == ISD::TargetExternalSymbol ||
            Callee.getOpcode() == ISD::TargetGlobalAddress ||
            isa<ConstantSDNode>(Callee)) &&
    "Expecting an global address, external symbol, absolute value or register");

    return DAG.getNode(PPCISD::TC_RETURN, dl, MVT::Other, Ops);
  }

  // Add a NOP immediately after the branch instruction when using the 64-bit
  // SVR4 ABI. At link time, if caller and callee are in a different module and
  // thus have a different TOC, the call will be replaced with a call to a stub
  // function which saves the current TOC, loads the TOC of the callee and
  // branches to the callee. The NOP will be replaced with a load instruction
  // which restores the TOC of the caller from the TOC save slot of the current
  // stack frame. If caller and callee belong to the same module (and have the
  // same TOC), the NOP will remain unchanged.

  bool needsTOCRestore = false;
  if (!isTailCall && Subtarget.isSVR4ABI()&& Subtarget.isPPC64()) {
    if (CallOpc == PPCISD::BCTRL) {
      // This is a call through a function pointer.
      // Restore the caller TOC from the save area into R2.
      // See PrepareCall() for more information about calls through function
      // pointers in the 64-bit SVR4 ABI.
      // We are using a target-specific load with r2 hard coded, because the
      // result of a target-independent load would never go directly into r2,
      // since r2 is a reserved register (which prevents the register allocator
      // from allocating it), resulting in an additional register being
      // allocated and an unnecessary move instruction being generated.
      needsTOCRestore = true;
    } else if ((CallOpc == PPCISD::CALL) &&
               (!isLocalCall(Callee) ||
                DAG.getTarget().getRelocationModel() == Reloc::PIC_)) {
      // Otherwise insert NOP for non-local calls.
      CallOpc = PPCISD::CALL_NOP;
    }
  }

  Chain = DAG.getNode(CallOpc, dl, NodeTys, Ops);
  InFlag = Chain.getValue(1);

  if (needsTOCRestore) {
    SDVTList VTs = DAG.getVTList(MVT::Other, MVT::Glue);
    EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();
    SDValue StackPtr = DAG.getRegister(PPC::X1, PtrVT);
    unsigned TOCSaveOffset = PPCFrameLowering::getTOCSaveOffset(isELFv2ABI);
    SDValue TOCOff = DAG.getIntPtrConstant(TOCSaveOffset);
    SDValue AddTOC = DAG.getNode(ISD::ADD, dl, MVT::i64, StackPtr, TOCOff);
    Chain = DAG.getNode(PPCISD::LOAD_TOC, dl, VTs, Chain, AddTOC, InFlag);
    InFlag = Chain.getValue(1);
  }

  Chain = DAG.getCALLSEQ_END(Chain, DAG.getIntPtrConstant(NumBytes, true),
                             DAG.getIntPtrConstant(BytesCalleePops, true),
                             InFlag, dl);
  if (!Ins.empty())
    InFlag = Chain.getValue(1);

  return LowerCallResult(Chain, InFlag, CallConv, isVarArg,
                         Ins, dl, DAG, InVals);
}

SDValue
PPCTargetLowering::LowerCall(TargetLowering::CallLoweringInfo &CLI,
                             SmallVectorImpl<SDValue> &InVals) const {
  SelectionDAG &DAG                     = CLI.DAG;
  SDLoc &dl                             = CLI.DL;
  SmallVectorImpl<ISD::OutputArg> &Outs = CLI.Outs;
  SmallVectorImpl<SDValue> &OutVals     = CLI.OutVals;
  SmallVectorImpl<ISD::InputArg> &Ins   = CLI.Ins;
  SDValue Chain                         = CLI.Chain;
  SDValue Callee                        = CLI.Callee;
  bool &isTailCall                      = CLI.IsTailCall;
  CallingConv::ID CallConv              = CLI.CallConv;
  bool isVarArg                         = CLI.IsVarArg;

  if (isTailCall)
    isTailCall = IsEligibleForTailCallOptimization(Callee, CallConv, isVarArg,
                                                   Ins, DAG);

  if (!isTailCall && CLI.CS && CLI.CS->isMustTailCall())
    report_fatal_error("failed to perform tail call elimination on a call "
                       "site marked musttail");

  if (Subtarget.isSVR4ABI()) {
    if (Subtarget.isPPC64())
      return LowerCall_64SVR4(Chain, Callee, CallConv, isVarArg,
                              isTailCall, Outs, OutVals, Ins,
                              dl, DAG, InVals);
    else
      return LowerCall_32SVR4(Chain, Callee, CallConv, isVarArg,
                              isTailCall, Outs, OutVals, Ins,
                              dl, DAG, InVals);
  }

  return LowerCall_Darwin(Chain, Callee, CallConv, isVarArg,
                          isTailCall, Outs, OutVals, Ins,
                          dl, DAG, InVals);
}

SDValue
PPCTargetLowering::LowerCall_32SVR4(SDValue Chain, SDValue Callee,
                                    CallingConv::ID CallConv, bool isVarArg,
                                    bool isTailCall,
                                    const SmallVectorImpl<ISD::OutputArg> &Outs,
                                    const SmallVectorImpl<SDValue> &OutVals,
                                    const SmallVectorImpl<ISD::InputArg> &Ins,
                                    SDLoc dl, SelectionDAG &DAG,
                                    SmallVectorImpl<SDValue> &InVals) const {
  // See PPCTargetLowering::LowerFormalArguments_32SVR4() for a description
  // of the 32-bit SVR4 ABI stack frame layout.

  assert((CallConv == CallingConv::C ||
          CallConv == CallingConv::Fast) && "Unknown calling convention!");

  unsigned PtrByteSize = 4;

  MachineFunction &MF = DAG.getMachineFunction();

  // Mark this function as potentially containing a function that contains a
  // tail call. As a consequence the frame pointer will be used for dynamicalloc
  // and restoring the callers stack pointer in this functions epilog. This is
  // done because by tail calling the called function might overwrite the value
  // in this function's (MF) stack pointer stack slot 0(SP).
  if (getTargetMachine().Options.GuaranteedTailCallOpt &&
      CallConv == CallingConv::Fast)
    MF.getInfo<PPCFunctionInfo>()->setHasFastCall();

  // Count how many bytes are to be pushed on the stack, including the linkage
  // area, parameter list area and the part of the local variable space which
  // contains copies of aggregates which are passed by value.

  // Assign locations to all of the outgoing arguments.
  SmallVector<CCValAssign, 16> ArgLocs;
  CCState CCInfo(CallConv, isVarArg, DAG.getMachineFunction(), ArgLocs,
                 *DAG.getContext());

  // Reserve space for the linkage area on the stack.
  CCInfo.AllocateStack(PPCFrameLowering::getLinkageSize(false, false, false),
                       PtrByteSize);

  if (isVarArg) {
    // Handle fixed and variable vector arguments differently.
    // Fixed vector arguments go into registers as long as registers are
    // available. Variable vector arguments always go into memory.
    unsigned NumArgs = Outs.size();

    for (unsigned i = 0; i != NumArgs; ++i) {
      MVT ArgVT = Outs[i].VT;
      ISD::ArgFlagsTy ArgFlags = Outs[i].Flags;
      bool Result;

      if (Outs[i].IsFixed) {
        Result = CC_PPC32_SVR4(i, ArgVT, ArgVT, CCValAssign::Full, ArgFlags,
                               CCInfo);
      } else {
        Result = CC_PPC32_SVR4_VarArg(i, ArgVT, ArgVT, CCValAssign::Full,
                                      ArgFlags, CCInfo);
      }

      if (Result) {
#ifndef NDEBUG
        errs() << "Call operand #" << i << " has unhandled type "
             << EVT(ArgVT).getEVTString() << "\n";
#endif
        llvm_unreachable(nullptr);
      }
    }
  } else {
    // All arguments are treated the same.
    CCInfo.AnalyzeCallOperands(Outs, CC_PPC32_SVR4);
  }

  // Assign locations to all of the outgoing aggregate by value arguments.
  SmallVector<CCValAssign, 16> ByValArgLocs;
  CCState CCByValInfo(CallConv, isVarArg, DAG.getMachineFunction(),
                      ByValArgLocs, *DAG.getContext());

  // Reserve stack space for the allocations in CCInfo.
  CCByValInfo.AllocateStack(CCInfo.getNextStackOffset(), PtrByteSize);

  CCByValInfo.AnalyzeCallOperands(Outs, CC_PPC32_SVR4_ByVal);

  // Size of the linkage area, parameter list area and the part of the local
  // space variable where copies of aggregates which are passed by value are
  // stored.
  unsigned NumBytes = CCByValInfo.getNextStackOffset();

  // Calculate by how many bytes the stack has to be adjusted in case of tail
  // call optimization.
  int SPDiff = CalculateTailCallSPDiff(DAG, isTailCall, NumBytes);

  // Adjust the stack pointer for the new arguments...
  // These operations are automatically eliminated by the prolog/epilog pass
  Chain = DAG.getCALLSEQ_START(Chain, DAG.getIntPtrConstant(NumBytes, true),
                               dl);
  SDValue CallSeqStart = Chain;

  // Load the return address and frame pointer so it can be moved somewhere else
  // later.
  SDValue LROp, FPOp;
  Chain = EmitTailCallLoadFPAndRetAddr(DAG, SPDiff, Chain, LROp, FPOp, false,
                                       dl);

  // Set up a copy of the stack pointer for use loading and storing any
  // arguments that may not fit in the registers available for argument
  // passing.
  SDValue StackPtr = DAG.getRegister(PPC::R1, MVT::i32);

  SmallVector<std::pair<unsigned, SDValue>, 8> RegsToPass;
  SmallVector<TailCallArgumentInfo, 8> TailCallArguments;
  SmallVector<SDValue, 8> MemOpChains;

  bool seenFloatArg = false;
  // Walk the register/memloc assignments, inserting copies/loads.
  for (unsigned i = 0, j = 0, e = ArgLocs.size();
       i != e;
       ++i) {
    CCValAssign &VA = ArgLocs[i];
    SDValue Arg = OutVals[i];
    ISD::ArgFlagsTy Flags = Outs[i].Flags;

    if (Flags.isByVal()) {
      // Argument is an aggregate which is passed by value, thus we need to
      // create a copy of it in the local variable space of the current stack
      // frame (which is the stack frame of the caller) and pass the address of
      // this copy to the callee.
      assert((j < ByValArgLocs.size()) && "Index out of bounds!");
      CCValAssign &ByValVA = ByValArgLocs[j++];
      assert((VA.getValNo() == ByValVA.getValNo()) && "ValNo mismatch!");

      // Memory reserved in the local variable space of the callers stack frame.
      unsigned LocMemOffset = ByValVA.getLocMemOffset();

      SDValue PtrOff = DAG.getIntPtrConstant(LocMemOffset);
      PtrOff = DAG.getNode(ISD::ADD, dl, getPointerTy(), StackPtr, PtrOff);

      // Create a copy of the argument in the local area of the current
      // stack frame.
      SDValue MemcpyCall =
        CreateCopyOfByValArgument(Arg, PtrOff,
                                  CallSeqStart.getNode()->getOperand(0),
                                  Flags, DAG, dl);

      // This must go outside the CALLSEQ_START..END.
      SDValue NewCallSeqStart = DAG.getCALLSEQ_START(MemcpyCall,
                           CallSeqStart.getNode()->getOperand(1),
                           SDLoc(MemcpyCall));
      DAG.ReplaceAllUsesWith(CallSeqStart.getNode(),
                             NewCallSeqStart.getNode());
      Chain = CallSeqStart = NewCallSeqStart;

      // Pass the address of the aggregate copy on the stack either in a
      // physical register or in the parameter list area of the current stack
      // frame to the callee.
      Arg = PtrOff;
    }

    if (VA.isRegLoc()) {
      if (Arg.getValueType() == MVT::i1)
        Arg = DAG.getNode(ISD::ZERO_EXTEND, dl, MVT::i32, Arg);

      seenFloatArg |= VA.getLocVT().isFloatingPoint();
      // Put argument in a physical register.
      RegsToPass.push_back(std::make_pair(VA.getLocReg(), Arg));
    } else {
      // Put argument in the parameter list area of the current stack frame.
      assert(VA.isMemLoc());
      unsigned LocMemOffset = VA.getLocMemOffset();

      if (!isTailCall) {
        SDValue PtrOff = DAG.getIntPtrConstant(LocMemOffset);
        PtrOff = DAG.getNode(ISD::ADD, dl, getPointerTy(), StackPtr, PtrOff);

        MemOpChains.push_back(DAG.getStore(Chain, dl, Arg, PtrOff,
                                           MachinePointerInfo(),
                                           false, false, 0));
      } else {
        // Calculate and remember argument location.
        CalculateTailCallArgDest(DAG, MF, false, Arg, SPDiff, LocMemOffset,
                                 TailCallArguments);
      }
    }
  }

  if (!MemOpChains.empty())
    Chain = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, MemOpChains);

  // Build a sequence of copy-to-reg nodes chained together with token chain
  // and flag operands which copy the outgoing args into the appropriate regs.
  SDValue InFlag;
  for (unsigned i = 0, e = RegsToPass.size(); i != e; ++i) {
    Chain = DAG.getCopyToReg(Chain, dl, RegsToPass[i].first,
                             RegsToPass[i].second, InFlag);
    InFlag = Chain.getValue(1);
  }

  // Set CR bit 6 to true if this is a vararg call with floating args passed in
  // registers.
  if (isVarArg) {
    SDVTList VTs = DAG.getVTList(MVT::Other, MVT::Glue);
    SDValue Ops[] = { Chain, InFlag };

    Chain = DAG.getNode(seenFloatArg ? PPCISD::CR6SET : PPCISD::CR6UNSET,
                        dl, VTs, makeArrayRef(Ops, InFlag.getNode() ? 2 : 1));

    InFlag = Chain.getValue(1);
  }

  if (isTailCall)
    PrepareTailCall(DAG, InFlag, Chain, dl, false, SPDiff, NumBytes, LROp, FPOp,
                    false, TailCallArguments);

  return FinishCall(CallConv, dl, isTailCall, isVarArg, DAG,
                    RegsToPass, InFlag, Chain, Callee, SPDiff, NumBytes,
                    Ins, InVals);
}

// Copy an argument into memory, being careful to do this outside the
// call sequence for the call to which the argument belongs.
SDValue
PPCTargetLowering::createMemcpyOutsideCallSeq(SDValue Arg, SDValue PtrOff,
                                              SDValue CallSeqStart,
                                              ISD::ArgFlagsTy Flags,
                                              SelectionDAG &DAG,
                                              SDLoc dl) const {
  SDValue MemcpyCall = CreateCopyOfByValArgument(Arg, PtrOff,
                        CallSeqStart.getNode()->getOperand(0),
                        Flags, DAG, dl);
  // The MEMCPY must go outside the CALLSEQ_START..END.
  SDValue NewCallSeqStart = DAG.getCALLSEQ_START(MemcpyCall,
                             CallSeqStart.getNode()->getOperand(1),
                             SDLoc(MemcpyCall));
  DAG.ReplaceAllUsesWith(CallSeqStart.getNode(),
                         NewCallSeqStart.getNode());
  return NewCallSeqStart;
}

SDValue
PPCTargetLowering::LowerCall_64SVR4(SDValue Chain, SDValue Callee,
                                    CallingConv::ID CallConv, bool isVarArg,
                                    bool isTailCall,
                                    const SmallVectorImpl<ISD::OutputArg> &Outs,
                                    const SmallVectorImpl<SDValue> &OutVals,
                                    const SmallVectorImpl<ISD::InputArg> &Ins,
                                    SDLoc dl, SelectionDAG &DAG,
                                    SmallVectorImpl<SDValue> &InVals) const {

  bool isELFv2ABI = Subtarget.isELFv2ABI();
  bool isLittleEndian = Subtarget.isLittleEndian();
  unsigned NumOps = Outs.size();

  EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();
  unsigned PtrByteSize = 8;

  MachineFunction &MF = DAG.getMachineFunction();

  // Mark this function as potentially containing a function that contains a
  // tail call. As a consequence the frame pointer will be used for dynamicalloc
  // and restoring the callers stack pointer in this functions epilog. This is
  // done because by tail calling the called function might overwrite the value
  // in this function's (MF) stack pointer stack slot 0(SP).
  if (getTargetMachine().Options.GuaranteedTailCallOpt &&
      CallConv == CallingConv::Fast)
    MF.getInfo<PPCFunctionInfo>()->setHasFastCall();

  // Count how many bytes are to be pushed on the stack, including the linkage
  // area, and parameter passing area.  On ELFv1, the linkage area is 48 bytes
  // reserved space for [SP][CR][LR][2 x unused][TOC]; on ELFv2, the linkage
  // area is 32 bytes reserved space for [SP][CR][LR][TOC].
  unsigned LinkageSize = PPCFrameLowering::getLinkageSize(true, false,
                                                          isELFv2ABI);
  unsigned NumBytes = LinkageSize;

  // Add up all the space actually used.
  for (unsigned i = 0; i != NumOps; ++i) {
    ISD::ArgFlagsTy Flags = Outs[i].Flags;
    EVT ArgVT = Outs[i].VT;
    EVT OrigVT = Outs[i].ArgVT;

    /* Respect alignment of argument on the stack.  */
    unsigned Align =
      CalculateStackSlotAlignment(ArgVT, OrigVT, Flags, PtrByteSize);
    NumBytes = ((NumBytes + Align - 1) / Align) * Align;

    NumBytes += CalculateStackSlotSize(ArgVT, Flags, PtrByteSize);
    if (Flags.isInConsecutiveRegsLast())
      NumBytes = ((NumBytes + PtrByteSize - 1)/PtrByteSize) * PtrByteSize;
  }

  unsigned NumBytesActuallyUsed = NumBytes;

  // The prolog code of the callee may store up to 8 GPR argument registers to
  // the stack, allowing va_start to index over them in memory if its varargs.
  // Because we cannot tell if this is needed on the caller side, we have to
  // conservatively assume that it is needed.  As such, make sure we have at
  // least enough stack space for the caller to store the 8 GPRs.
  // FIXME: On ELFv2, it may be unnecessary to allocate the parameter area.
  NumBytes = std::max(NumBytes, LinkageSize + 8 * PtrByteSize);

  // Tail call needs the stack to be aligned.
  if (getTargetMachine().Options.GuaranteedTailCallOpt &&
      CallConv == CallingConv::Fast)
    NumBytes = EnsureStackAlignment(MF.getTarget(), NumBytes);

  // Calculate by how many bytes the stack has to be adjusted in case of tail
  // call optimization.
  int SPDiff = CalculateTailCallSPDiff(DAG, isTailCall, NumBytes);

  // To protect arguments on the stack from being clobbered in a tail call,
  // force all the loads to happen before doing any other lowering.
  if (isTailCall)
    Chain = DAG.getStackArgumentTokenFactor(Chain);

  // Adjust the stack pointer for the new arguments...
  // These operations are automatically eliminated by the prolog/epilog pass
  Chain = DAG.getCALLSEQ_START(Chain, DAG.getIntPtrConstant(NumBytes, true),
                               dl);
  SDValue CallSeqStart = Chain;

  // Load the return address and frame pointer so it can be move somewhere else
  // later.
  SDValue LROp, FPOp;
  Chain = EmitTailCallLoadFPAndRetAddr(DAG, SPDiff, Chain, LROp, FPOp, true,
                                       dl);

  // Set up a copy of the stack pointer for use loading and storing any
  // arguments that may not fit in the registers available for argument
  // passing.
  SDValue StackPtr = DAG.getRegister(PPC::X1, MVT::i64);

  // Figure out which arguments are going to go in registers, and which in
  // memory.  Also, if this is a vararg function, floating point operations
  // must be stored to our stack, and loaded into integer regs as well, if
  // any integer regs are available for argument passing.
  unsigned ArgOffset = LinkageSize;
  unsigned GPR_idx, FPR_idx = 0, VR_idx = 0;

  static const MCPhysReg GPR[] = {
    PPC::X3, PPC::X4, PPC::X5, PPC::X6,
    PPC::X7, PPC::X8, PPC::X9, PPC::X10,
  };
  static const MCPhysReg *FPR = GetFPR();

  static const MCPhysReg VR[] = {
    PPC::V2, PPC::V3, PPC::V4, PPC::V5, PPC::V6, PPC::V7, PPC::V8,
    PPC::V9, PPC::V10, PPC::V11, PPC::V12, PPC::V13
  };
  static const MCPhysReg VSRH[] = {
    PPC::VSH2, PPC::VSH3, PPC::VSH4, PPC::VSH5, PPC::VSH6, PPC::VSH7, PPC::VSH8,
    PPC::VSH9, PPC::VSH10, PPC::VSH11, PPC::VSH12, PPC::VSH13
  };

  const unsigned NumGPRs = array_lengthof(GPR);
  const unsigned NumFPRs = 13;
  const unsigned NumVRs  = array_lengthof(VR);

  SmallVector<std::pair<unsigned, SDValue>, 8> RegsToPass;
  SmallVector<TailCallArgumentInfo, 8> TailCallArguments;

  SmallVector<SDValue, 8> MemOpChains;
  for (unsigned i = 0; i != NumOps; ++i) {
    SDValue Arg = OutVals[i];
    ISD::ArgFlagsTy Flags = Outs[i].Flags;
    EVT ArgVT = Outs[i].VT;
    EVT OrigVT = Outs[i].ArgVT;

    /* Respect alignment of argument on the stack.  */
    unsigned Align =
      CalculateStackSlotAlignment(ArgVT, OrigVT, Flags, PtrByteSize);
    ArgOffset = ((ArgOffset + Align - 1) / Align) * Align;

    /* Compute GPR index associated with argument offset.  */
    GPR_idx = (ArgOffset - LinkageSize) / PtrByteSize;
    GPR_idx = std::min(GPR_idx, NumGPRs);

    // PtrOff will be used to store the current argument to the stack if a
    // register cannot be found for it.
    SDValue PtrOff;

    PtrOff = DAG.getConstant(ArgOffset, StackPtr.getValueType());

    PtrOff = DAG.getNode(ISD::ADD, dl, PtrVT, StackPtr, PtrOff);

    // Promote integers to 64-bit values.
    if (Arg.getValueType() == MVT::i32 || Arg.getValueType() == MVT::i1) {
      // FIXME: Should this use ANY_EXTEND if neither sext nor zext?
      unsigned ExtOp = Flags.isSExt() ? ISD::SIGN_EXTEND : ISD::ZERO_EXTEND;
      Arg = DAG.getNode(ExtOp, dl, MVT::i64, Arg);
    }

    // FIXME memcpy is used way more than necessary.  Correctness first.
    // Note: "by value" is code for passing a structure by value, not
    // basic types.
    if (Flags.isByVal()) {
      // Note: Size includes alignment padding, so
      //   struct x { short a; char b; }
      // will have Size = 4.  With #pragma pack(1), it will have Size = 3.
      // These are the proper values we need for right-justifying the
      // aggregate in a parameter register.
      unsigned Size = Flags.getByValSize();

      // An empty aggregate parameter takes up no storage and no
      // registers.
      if (Size == 0)
        continue;

      // All aggregates smaller than 8 bytes must be passed right-justified.
      if (Size==1 || Size==2 || Size==4) {
        EVT VT = (Size==1) ? MVT::i8 : ((Size==2) ? MVT::i16 : MVT::i32);
        if (GPR_idx != NumGPRs) {
          SDValue Load = DAG.getExtLoad(ISD::EXTLOAD, dl, PtrVT, Chain, Arg,
                                        MachinePointerInfo(), VT,
                                        false, false, false, 0);
          MemOpChains.push_back(Load.getValue(1));
          RegsToPass.push_back(std::make_pair(GPR[GPR_idx], Load));

          ArgOffset += PtrByteSize;
          continue;
        }
      }

      if (GPR_idx == NumGPRs && Size < 8) {
        SDValue AddPtr = PtrOff;
        if (!isLittleEndian) {
          SDValue Const = DAG.getConstant(PtrByteSize - Size,
                                          PtrOff.getValueType());
          AddPtr = DAG.getNode(ISD::ADD, dl, PtrVT, PtrOff, Const);
        }
        Chain = CallSeqStart = createMemcpyOutsideCallSeq(Arg, AddPtr,
                                                          CallSeqStart,
                                                          Flags, DAG, dl);
        ArgOffset += PtrByteSize;
        continue;
      }
      // Copy entire object into memory.  There are cases where gcc-generated
      // code assumes it is there, even if it could be put entirely into
      // registers.  (This is not what the doc says.)

      // FIXME: The above statement is likely due to a misunderstanding of the
      // documents.  All arguments must be copied into the parameter area BY
      // THE CALLEE in the event that the callee takes the address of any
      // formal argument.  That has not yet been implemented.  However, it is
      // reasonable to use the stack area as a staging area for the register
      // load.

      // Skip this for small aggregates, as we will use the same slot for a
      // right-justified copy, below.
      if (Size >= 8)
        Chain = CallSeqStart = createMemcpyOutsideCallSeq(Arg, PtrOff,
                                                          CallSeqStart,
                                                          Flags, DAG, dl);

      // When a register is available, pass a small aggregate right-justified.
      if (Size < 8 && GPR_idx != NumGPRs) {
        // The easiest way to get this right-justified in a register
        // is to copy the structure into the rightmost portion of a
        // local variable slot, then load the whole slot into the
        // register.
        // FIXME: The memcpy seems to produce pretty awful code for
        // small aggregates, particularly for packed ones.
        // FIXME: It would be preferable to use the slot in the
        // parameter save area instead of a new local variable.
        SDValue AddPtr = PtrOff;
        if (!isLittleEndian) {
          SDValue Const = DAG.getConstant(8 - Size, PtrOff.getValueType());
          AddPtr = DAG.getNode(ISD::ADD, dl, PtrVT, PtrOff, Const);
        }
        Chain = CallSeqStart = createMemcpyOutsideCallSeq(Arg, AddPtr,
                                                          CallSeqStart,
                                                          Flags, DAG, dl);

        // Load the slot into the register.
        SDValue Load = DAG.getLoad(PtrVT, dl, Chain, PtrOff,
                                   MachinePointerInfo(),
                                   false, false, false, 0);
        MemOpChains.push_back(Load.getValue(1));
        RegsToPass.push_back(std::make_pair(GPR[GPR_idx], Load));

        // Done with this argument.
        ArgOffset += PtrByteSize;
        continue;
      }

      // For aggregates larger than PtrByteSize, copy the pieces of the
      // object that fit into registers from the parameter save area.
      for (unsigned j=0; j<Size; j+=PtrByteSize) {
        SDValue Const = DAG.getConstant(j, PtrOff.getValueType());
        SDValue AddArg = DAG.getNode(ISD::ADD, dl, PtrVT, Arg, Const);
        if (GPR_idx != NumGPRs) {
          SDValue Load = DAG.getLoad(PtrVT, dl, Chain, AddArg,
                                     MachinePointerInfo(),
                                     false, false, false, 0);
          MemOpChains.push_back(Load.getValue(1));
          RegsToPass.push_back(std::make_pair(GPR[GPR_idx++], Load));
          ArgOffset += PtrByteSize;
        } else {
          ArgOffset += ((Size - j + PtrByteSize-1)/PtrByteSize)*PtrByteSize;
          break;
        }
      }
      continue;
    }

    switch (Arg.getSimpleValueType().SimpleTy) {
    default: llvm_unreachable("Unexpected ValueType for argument!");
    case MVT::i1:
    case MVT::i32:
    case MVT::i64:
      // These can be scalar arguments or elements of an integer array type
      // passed directly.  Clang may use those instead of "byval" aggregate
      // types to avoid forcing arguments to memory unnecessarily.
      if (GPR_idx != NumGPRs) {
        RegsToPass.push_back(std::make_pair(GPR[GPR_idx], Arg));
      } else {
        LowerMemOpCallTo(DAG, MF, Chain, Arg, PtrOff, SPDiff, ArgOffset,
                         true, isTailCall, false, MemOpChains,
                         TailCallArguments, dl);
      }
      ArgOffset += PtrByteSize;
      break;
    case MVT::f32:
    case MVT::f64: {
      // These can be scalar arguments or elements of a float array type
      // passed directly.  The latter are used to implement ELFv2 homogenous
      // float aggregates.

      // Named arguments go into FPRs first, and once they overflow, the
      // remaining arguments go into GPRs and then the parameter save area.
      // Unnamed arguments for vararg functions always go to GPRs and
      // then the parameter save area.  For now, put all arguments to vararg
      // routines always in both locations (FPR *and* GPR or stack slot).
      bool NeedGPROrStack = isVarArg || FPR_idx == NumFPRs;

      // First load the argument into the next available FPR.
      if (FPR_idx != NumFPRs)
        RegsToPass.push_back(std::make_pair(FPR[FPR_idx++], Arg));

      // Next, load the argument into GPR or stack slot if needed.
      if (!NeedGPROrStack)
        ;
      else if (GPR_idx != NumGPRs) {
        // In the non-vararg case, this can only ever happen in the
        // presence of f32 array types, since otherwise we never run
        // out of FPRs before running out of GPRs.
        SDValue ArgVal;

        // Double values are always passed in a single GPR.
        if (Arg.getValueType() != MVT::f32) {
          ArgVal = DAG.getNode(ISD::BITCAST, dl, MVT::i64, Arg);

        // Non-array float values are extended and passed in a GPR.
        } else if (!Flags.isInConsecutiveRegs()) {
          ArgVal = DAG.getNode(ISD::BITCAST, dl, MVT::i32, Arg);
          ArgVal = DAG.getNode(ISD::ANY_EXTEND, dl, MVT::i64, ArgVal);

        // If we have an array of floats, we collect every odd element
        // together with its predecessor into one GPR.
        } else if (ArgOffset % PtrByteSize != 0) {
          SDValue Lo, Hi;
          Lo = DAG.getNode(ISD::BITCAST, dl, MVT::i32, OutVals[i - 1]);
          Hi = DAG.getNode(ISD::BITCAST, dl, MVT::i32, Arg);
          if (!isLittleEndian)
            std::swap(Lo, Hi);
          ArgVal = DAG.getNode(ISD::BUILD_PAIR, dl, MVT::i64, Lo, Hi);

        // The final element, if even, goes into the first half of a GPR.
        } else if (Flags.isInConsecutiveRegsLast()) {
          ArgVal = DAG.getNode(ISD::BITCAST, dl, MVT::i32, Arg);
          ArgVal = DAG.getNode(ISD::ANY_EXTEND, dl, MVT::i64, ArgVal);
          if (!isLittleEndian)
            ArgVal = DAG.getNode(ISD::SHL, dl, MVT::i64, ArgVal,
                                 DAG.getConstant(32, MVT::i32));

        // Non-final even elements are skipped; they will be handled
        // together the with subsequent argument on the next go-around.
        } else
          ArgVal = SDValue();

        if (ArgVal.getNode())
          RegsToPass.push_back(std::make_pair(GPR[GPR_idx], ArgVal));
      } else {
        // Single-precision floating-point values are mapped to the
        // second (rightmost) word of the stack doubleword.
        if (Arg.getValueType() == MVT::f32 &&
            !isLittleEndian && !Flags.isInConsecutiveRegs()) {
          SDValue ConstFour = DAG.getConstant(4, PtrOff.getValueType());
          PtrOff = DAG.getNode(ISD::ADD, dl, PtrVT, PtrOff, ConstFour);
        }

        LowerMemOpCallTo(DAG, MF, Chain, Arg, PtrOff, SPDiff, ArgOffset,
                         true, isTailCall, false, MemOpChains,
                         TailCallArguments, dl);
      }
      // When passing an array of floats, the array occupies consecutive
      // space in the argument area; only round up to the next doubleword
      // at the end of the array.  Otherwise, each float takes 8 bytes.
      ArgOffset += (Arg.getValueType() == MVT::f32 &&
                    Flags.isInConsecutiveRegs()) ? 4 : 8;
      if (Flags.isInConsecutiveRegsLast())
        ArgOffset = ((ArgOffset + PtrByteSize - 1)/PtrByteSize) * PtrByteSize;
      break;
    }
    case MVT::v4f32:
    case MVT::v4i32:
    case MVT::v8i16:
    case MVT::v16i8:
    case MVT::v2f64:
    case MVT::v2i64:
      // These can be scalar arguments or elements of a vector array type
      // passed directly.  The latter are used to implement ELFv2 homogenous
      // vector aggregates.

      // For a varargs call, named arguments go into VRs or on the stack as
      // usual; unnamed arguments always go to the stack or the corresponding
      // GPRs when within range.  For now, we always put the value in both
      // locations (or even all three).
      if (isVarArg) {
        // We could elide this store in the case where the object fits
        // entirely in R registers.  Maybe later.
        SDValue Store = DAG.getStore(Chain, dl, Arg, PtrOff,
                                     MachinePointerInfo(), false, false, 0);
        MemOpChains.push_back(Store);
        if (VR_idx != NumVRs) {
          SDValue Load = DAG.getLoad(MVT::v4f32, dl, Store, PtrOff,
                                     MachinePointerInfo(),
                                     false, false, false, 0);
          MemOpChains.push_back(Load.getValue(1));

          unsigned VReg = (Arg.getSimpleValueType() == MVT::v2f64 ||
                           Arg.getSimpleValueType() == MVT::v2i64) ?
                          VSRH[VR_idx] : VR[VR_idx];
          ++VR_idx;

          RegsToPass.push_back(std::make_pair(VReg, Load));
        }
        ArgOffset += 16;
        for (unsigned i=0; i<16; i+=PtrByteSize) {
          if (GPR_idx == NumGPRs)
            break;
          SDValue Ix = DAG.getNode(ISD::ADD, dl, PtrVT, PtrOff,
                                  DAG.getConstant(i, PtrVT));
          SDValue Load = DAG.getLoad(PtrVT, dl, Store, Ix, MachinePointerInfo(),
                                     false, false, false, 0);
          MemOpChains.push_back(Load.getValue(1));
          RegsToPass.push_back(std::make_pair(GPR[GPR_idx++], Load));
        }
        break;
      }

      // Non-varargs Altivec params go into VRs or on the stack.
      if (VR_idx != NumVRs) {
        unsigned VReg = (Arg.getSimpleValueType() == MVT::v2f64 ||
                         Arg.getSimpleValueType() == MVT::v2i64) ?
                        VSRH[VR_idx] : VR[VR_idx];
        ++VR_idx;

        RegsToPass.push_back(std::make_pair(VReg, Arg));
      } else {
        LowerMemOpCallTo(DAG, MF, Chain, Arg, PtrOff, SPDiff, ArgOffset,
                         true, isTailCall, true, MemOpChains,
                         TailCallArguments, dl);
      }
      ArgOffset += 16;
      break;
    }
  }

  assert(NumBytesActuallyUsed == ArgOffset);
  (void)NumBytesActuallyUsed;

  if (!MemOpChains.empty())
    Chain = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, MemOpChains);

  // Check if this is an indirect call (MTCTR/BCTRL).
  // See PrepareCall() for more information about calls through function
  // pointers in the 64-bit SVR4 ABI.
  if (!isTailCall &&
      !dyn_cast<GlobalAddressSDNode>(Callee) &&
      !dyn_cast<ExternalSymbolSDNode>(Callee)) {
    // Load r2 into a virtual register and store it to the TOC save area.
    SDValue Val = DAG.getCopyFromReg(Chain, dl, PPC::X2, MVT::i64);
    // TOC save area offset.
    unsigned TOCSaveOffset = PPCFrameLowering::getTOCSaveOffset(isELFv2ABI);
    SDValue PtrOff = DAG.getIntPtrConstant(TOCSaveOffset);
    SDValue AddPtr = DAG.getNode(ISD::ADD, dl, PtrVT, StackPtr, PtrOff);
    Chain = DAG.getStore(Val.getValue(1), dl, Val, AddPtr, MachinePointerInfo(),
                         false, false, 0);
    // In the ELFv2 ABI, R12 must contain the address of an indirect callee.
    // This does not mean the MTCTR instruction must use R12; it's easier
    // to model this as an extra parameter, so do that.
    if (isELFv2ABI)
      RegsToPass.push_back(std::make_pair((unsigned)PPC::X12, Callee));
  }

  // Build a sequence of copy-to-reg nodes chained together with token chain
  // and flag operands which copy the outgoing args into the appropriate regs.
  SDValue InFlag;
  for (unsigned i = 0, e = RegsToPass.size(); i != e; ++i) {
    Chain = DAG.getCopyToReg(Chain, dl, RegsToPass[i].first,
                             RegsToPass[i].second, InFlag);
    InFlag = Chain.getValue(1);
  }

  if (isTailCall)
    PrepareTailCall(DAG, InFlag, Chain, dl, true, SPDiff, NumBytes, LROp,
                    FPOp, true, TailCallArguments);

  return FinishCall(CallConv, dl, isTailCall, isVarArg, DAG,
                    RegsToPass, InFlag, Chain, Callee, SPDiff, NumBytes,
                    Ins, InVals);
}

SDValue
PPCTargetLowering::LowerCall_Darwin(SDValue Chain, SDValue Callee,
                                    CallingConv::ID CallConv, bool isVarArg,
                                    bool isTailCall,
                                    const SmallVectorImpl<ISD::OutputArg> &Outs,
                                    const SmallVectorImpl<SDValue> &OutVals,
                                    const SmallVectorImpl<ISD::InputArg> &Ins,
                                    SDLoc dl, SelectionDAG &DAG,
                                    SmallVectorImpl<SDValue> &InVals) const {

  unsigned NumOps = Outs.size();

  EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();
  bool isPPC64 = PtrVT == MVT::i64;
  unsigned PtrByteSize = isPPC64 ? 8 : 4;

  MachineFunction &MF = DAG.getMachineFunction();

  // Mark this function as potentially containing a function that contains a
  // tail call. As a consequence the frame pointer will be used for dynamicalloc
  // and restoring the callers stack pointer in this functions epilog. This is
  // done because by tail calling the called function might overwrite the value
  // in this function's (MF) stack pointer stack slot 0(SP).
  if (getTargetMachine().Options.GuaranteedTailCallOpt &&
      CallConv == CallingConv::Fast)
    MF.getInfo<PPCFunctionInfo>()->setHasFastCall();

  // Count how many bytes are to be pushed on the stack, including the linkage
  // area, and parameter passing area.  We start with 24/48 bytes, which is
  // prereserved space for [SP][CR][LR][3 x unused].
  unsigned LinkageSize = PPCFrameLowering::getLinkageSize(isPPC64, true,
                                                          false);
  unsigned NumBytes = LinkageSize;

  // Add up all the space actually used.
  // In 32-bit non-varargs calls, Altivec parameters all go at the end; usually
  // they all go in registers, but we must reserve stack space for them for
  // possible use by the caller.  In varargs or 64-bit calls, parameters are
  // assigned stack space in order, with padding so Altivec parameters are
  // 16-byte aligned.
  unsigned nAltivecParamsAtEnd = 0;
  for (unsigned i = 0; i != NumOps; ++i) {
    ISD::ArgFlagsTy Flags = Outs[i].Flags;
    EVT ArgVT = Outs[i].VT;
    // Varargs Altivec parameters are padded to a 16 byte boundary.
    if (ArgVT == MVT::v4f32 || ArgVT == MVT::v4i32 ||
        ArgVT == MVT::v8i16 || ArgVT == MVT::v16i8 ||
        ArgVT == MVT::v2f64 || ArgVT == MVT::v2i64) {
      if (!isVarArg && !isPPC64) {
        // Non-varargs Altivec parameters go after all the non-Altivec
        // parameters; handle those later so we know how much padding we need.
        nAltivecParamsAtEnd++;
        continue;
      }
      // Varargs and 64-bit Altivec parameters are padded to 16 byte boundary.
      NumBytes = ((NumBytes+15)/16)*16;
    }
    NumBytes += CalculateStackSlotSize(ArgVT, Flags, PtrByteSize);
  }

  // Allow for Altivec parameters at the end, if needed.
  if (nAltivecParamsAtEnd) {
    NumBytes = ((NumBytes+15)/16)*16;
    NumBytes += 16*nAltivecParamsAtEnd;
  }

  // The prolog code of the callee may store up to 8 GPR argument registers to
  // the stack, allowing va_start to index over them in memory if its varargs.
  // Because we cannot tell if this is needed on the caller side, we have to
  // conservatively assume that it is needed.  As such, make sure we have at
  // least enough stack space for the caller to store the 8 GPRs.
  NumBytes = std::max(NumBytes, LinkageSize + 8 * PtrByteSize);

  // Tail call needs the stack to be aligned.
  if (getTargetMachine().Options.GuaranteedTailCallOpt &&
      CallConv == CallingConv::Fast)
    NumBytes = EnsureStackAlignment(MF.getTarget(), NumBytes);

  // Calculate by how many bytes the stack has to be adjusted in case of tail
  // call optimization.
  int SPDiff = CalculateTailCallSPDiff(DAG, isTailCall, NumBytes);

  // To protect arguments on the stack from being clobbered in a tail call,
  // force all the loads to happen before doing any other lowering.
  if (isTailCall)
    Chain = DAG.getStackArgumentTokenFactor(Chain);

  // Adjust the stack pointer for the new arguments...
  // These operations are automatically eliminated by the prolog/epilog pass
  Chain = DAG.getCALLSEQ_START(Chain, DAG.getIntPtrConstant(NumBytes, true),
                               dl);
  SDValue CallSeqStart = Chain;

  // Load the return address and frame pointer so it can be move somewhere else
  // later.
  SDValue LROp, FPOp;
  Chain = EmitTailCallLoadFPAndRetAddr(DAG, SPDiff, Chain, LROp, FPOp, true,
                                       dl);

  // Set up a copy of the stack pointer for use loading and storing any
  // arguments that may not fit in the registers available for argument
  // passing.
  SDValue StackPtr;
  if (isPPC64)
    StackPtr = DAG.getRegister(PPC::X1, MVT::i64);
  else
    StackPtr = DAG.getRegister(PPC::R1, MVT::i32);

  // Figure out which arguments are going to go in registers, and which in
  // memory.  Also, if this is a vararg function, floating point operations
  // must be stored to our stack, and loaded into integer regs as well, if
  // any integer regs are available for argument passing.
  unsigned ArgOffset = LinkageSize;
  unsigned GPR_idx = 0, FPR_idx = 0, VR_idx = 0;

  static const MCPhysReg GPR_32[] = {           // 32-bit registers.
    PPC::R3, PPC::R4, PPC::R5, PPC::R6,
    PPC::R7, PPC::R8, PPC::R9, PPC::R10,
  };
  static const MCPhysReg GPR_64[] = {           // 64-bit registers.
    PPC::X3, PPC::X4, PPC::X5, PPC::X6,
    PPC::X7, PPC::X8, PPC::X9, PPC::X10,
  };
  static const MCPhysReg *FPR = GetFPR();

  static const MCPhysReg VR[] = {
    PPC::V2, PPC::V3, PPC::V4, PPC::V5, PPC::V6, PPC::V7, PPC::V8,
    PPC::V9, PPC::V10, PPC::V11, PPC::V12, PPC::V13
  };
  const unsigned NumGPRs = array_lengthof(GPR_32);
  const unsigned NumFPRs = 13;
  const unsigned NumVRs  = array_lengthof(VR);

  const MCPhysReg *GPR = isPPC64 ? GPR_64 : GPR_32;

  SmallVector<std::pair<unsigned, SDValue>, 8> RegsToPass;
  SmallVector<TailCallArgumentInfo, 8> TailCallArguments;

  SmallVector<SDValue, 8> MemOpChains;
  for (unsigned i = 0; i != NumOps; ++i) {
    SDValue Arg = OutVals[i];
    ISD::ArgFlagsTy Flags = Outs[i].Flags;

    // PtrOff will be used to store the current argument to the stack if a
    // register cannot be found for it.
    SDValue PtrOff;

    PtrOff = DAG.getConstant(ArgOffset, StackPtr.getValueType());

    PtrOff = DAG.getNode(ISD::ADD, dl, PtrVT, StackPtr, PtrOff);

    // On PPC64, promote integers to 64-bit values.
    if (isPPC64 && Arg.getValueType() == MVT::i32) {
      // FIXME: Should this use ANY_EXTEND if neither sext nor zext?
      unsigned ExtOp = Flags.isSExt() ? ISD::SIGN_EXTEND : ISD::ZERO_EXTEND;
      Arg = DAG.getNode(ExtOp, dl, MVT::i64, Arg);
    }

    // FIXME memcpy is used way more than necessary.  Correctness first.
    // Note: "by value" is code for passing a structure by value, not
    // basic types.
    if (Flags.isByVal()) {
      unsigned Size = Flags.getByValSize();
      // Very small objects are passed right-justified.  Everything else is
      // passed left-justified.
      if (Size==1 || Size==2) {
        EVT VT = (Size==1) ? MVT::i8 : MVT::i16;
        if (GPR_idx != NumGPRs) {
          SDValue Load = DAG.getExtLoad(ISD::EXTLOAD, dl, PtrVT, Chain, Arg,
                                        MachinePointerInfo(), VT,
                                        false, false, false, 0);
          MemOpChains.push_back(Load.getValue(1));
          RegsToPass.push_back(std::make_pair(GPR[GPR_idx++], Load));

          ArgOffset += PtrByteSize;
        } else {
          SDValue Const = DAG.getConstant(PtrByteSize - Size,
                                          PtrOff.getValueType());
          SDValue AddPtr = DAG.getNode(ISD::ADD, dl, PtrVT, PtrOff, Const);
          Chain = CallSeqStart = createMemcpyOutsideCallSeq(Arg, AddPtr,
                                                            CallSeqStart,
                                                            Flags, DAG, dl);
          ArgOffset += PtrByteSize;
        }
        continue;
      }
      // Copy entire object into memory.  There are cases where gcc-generated
      // code assumes it is there, even if it could be put entirely into
      // registers.  (This is not what the doc says.)
      Chain = CallSeqStart = createMemcpyOutsideCallSeq(Arg, PtrOff,
                                                        CallSeqStart,
                                                        Flags, DAG, dl);

      // For small aggregates (Darwin only) and aggregates >= PtrByteSize,
      // copy the pieces of the object that fit into registers from the
      // parameter save area.
      for (unsigned j=0; j<Size; j+=PtrByteSize) {
        SDValue Const = DAG.getConstant(j, PtrOff.getValueType());
        SDValue AddArg = DAG.getNode(ISD::ADD, dl, PtrVT, Arg, Const);
        if (GPR_idx != NumGPRs) {
          SDValue Load = DAG.getLoad(PtrVT, dl, Chain, AddArg,
                                     MachinePointerInfo(),
                                     false, false, false, 0);
          MemOpChains.push_back(Load.getValue(1));
          RegsToPass.push_back(std::make_pair(GPR[GPR_idx++], Load));
          ArgOffset += PtrByteSize;
        } else {
          ArgOffset += ((Size - j + PtrByteSize-1)/PtrByteSize)*PtrByteSize;
          break;
        }
      }
      continue;
    }

    switch (Arg.getSimpleValueType().SimpleTy) {
    default: llvm_unreachable("Unexpected ValueType for argument!");
    case MVT::i1:
    case MVT::i32:
    case MVT::i64:
      if (GPR_idx != NumGPRs) {
        if (Arg.getValueType() == MVT::i1)
          Arg = DAG.getNode(ISD::ZERO_EXTEND, dl, PtrVT, Arg);

        RegsToPass.push_back(std::make_pair(GPR[GPR_idx++], Arg));
      } else {
        LowerMemOpCallTo(DAG, MF, Chain, Arg, PtrOff, SPDiff, ArgOffset,
                         isPPC64, isTailCall, false, MemOpChains,
                         TailCallArguments, dl);
      }
      ArgOffset += PtrByteSize;
      break;
    case MVT::f32:
    case MVT::f64:
      if (FPR_idx != NumFPRs) {
        RegsToPass.push_back(std::make_pair(FPR[FPR_idx++], Arg));

        if (isVarArg) {
          SDValue Store = DAG.getStore(Chain, dl, Arg, PtrOff,
                                       MachinePointerInfo(), false, false, 0);
          MemOpChains.push_back(Store);

          // Float varargs are always shadowed in available integer registers
          if (GPR_idx != NumGPRs) {
            SDValue Load = DAG.getLoad(PtrVT, dl, Store, PtrOff,
                                       MachinePointerInfo(), false, false,
                                       false, 0);
            MemOpChains.push_back(Load.getValue(1));
            RegsToPass.push_back(std::make_pair(GPR[GPR_idx++], Load));
          }
          if (GPR_idx != NumGPRs && Arg.getValueType() == MVT::f64 && !isPPC64){
            SDValue ConstFour = DAG.getConstant(4, PtrOff.getValueType());
            PtrOff = DAG.getNode(ISD::ADD, dl, PtrVT, PtrOff, ConstFour);
            SDValue Load = DAG.getLoad(PtrVT, dl, Store, PtrOff,
                                       MachinePointerInfo(),
                                       false, false, false, 0);
            MemOpChains.push_back(Load.getValue(1));
            RegsToPass.push_back(std::make_pair(GPR[GPR_idx++], Load));
          }
        } else {
          // If we have any FPRs remaining, we may also have GPRs remaining.
          // Args passed in FPRs consume either 1 (f32) or 2 (f64) available
          // GPRs.
          if (GPR_idx != NumGPRs)
            ++GPR_idx;
          if (GPR_idx != NumGPRs && Arg.getValueType() == MVT::f64 &&
              !isPPC64)  // PPC64 has 64-bit GPR's obviously :)
            ++GPR_idx;
        }
      } else
        LowerMemOpCallTo(DAG, MF, Chain, Arg, PtrOff, SPDiff, ArgOffset,
                         isPPC64, isTailCall, false, MemOpChains,
                         TailCallArguments, dl);
      if (isPPC64)
        ArgOffset += 8;
      else
        ArgOffset += Arg.getValueType() == MVT::f32 ? 4 : 8;
      break;
    case MVT::v4f32:
    case MVT::v4i32:
    case MVT::v8i16:
    case MVT::v16i8:
      if (isVarArg) {
        // These go aligned on the stack, or in the corresponding R registers
        // when within range.  The Darwin PPC ABI doc claims they also go in
        // V registers; in fact gcc does this only for arguments that are
        // prototyped, not for those that match the ...  We do it for all
        // arguments, seems to work.
        while (ArgOffset % 16 !=0) {
          ArgOffset += PtrByteSize;
          if (GPR_idx != NumGPRs)
            GPR_idx++;
        }
        // We could elide this store in the case where the object fits
        // entirely in R registers.  Maybe later.
        PtrOff = DAG.getNode(ISD::ADD, dl, PtrVT, StackPtr,
                            DAG.getConstant(ArgOffset, PtrVT));
        SDValue Store = DAG.getStore(Chain, dl, Arg, PtrOff,
                                     MachinePointerInfo(), false, false, 0);
        MemOpChains.push_back(Store);
        if (VR_idx != NumVRs) {
          SDValue Load = DAG.getLoad(MVT::v4f32, dl, Store, PtrOff,
                                     MachinePointerInfo(),
                                     false, false, false, 0);
          MemOpChains.push_back(Load.getValue(1));
          RegsToPass.push_back(std::make_pair(VR[VR_idx++], Load));
        }
        ArgOffset += 16;
        for (unsigned i=0; i<16; i+=PtrByteSize) {
          if (GPR_idx == NumGPRs)
            break;
          SDValue Ix = DAG.getNode(ISD::ADD, dl, PtrVT, PtrOff,
                                  DAG.getConstant(i, PtrVT));
          SDValue Load = DAG.getLoad(PtrVT, dl, Store, Ix, MachinePointerInfo(),
                                     false, false, false, 0);
          MemOpChains.push_back(Load.getValue(1));
          RegsToPass.push_back(std::make_pair(GPR[GPR_idx++], Load));
        }
        break;
      }

      // Non-varargs Altivec params generally go in registers, but have
      // stack space allocated at the end.
      if (VR_idx != NumVRs) {
        // Doesn't have GPR space allocated.
        RegsToPass.push_back(std::make_pair(VR[VR_idx++], Arg));
      } else if (nAltivecParamsAtEnd==0) {
        // We are emitting Altivec params in order.
        LowerMemOpCallTo(DAG, MF, Chain, Arg, PtrOff, SPDiff, ArgOffset,
                         isPPC64, isTailCall, true, MemOpChains,
                         TailCallArguments, dl);
        ArgOffset += 16;
      }
      break;
    }
  }
  // If all Altivec parameters fit in registers, as they usually do,
  // they get stack space following the non-Altivec parameters.  We
  // don't track this here because nobody below needs it.
  // If there are more Altivec parameters than fit in registers emit
  // the stores here.
  if (!isVarArg && nAltivecParamsAtEnd > NumVRs) {
    unsigned j = 0;
    // Offset is aligned; skip 1st 12 params which go in V registers.
    ArgOffset = ((ArgOffset+15)/16)*16;
    ArgOffset += 12*16;
    for (unsigned i = 0; i != NumOps; ++i) {
      SDValue Arg = OutVals[i];
      EVT ArgType = Outs[i].VT;
      if (ArgType==MVT::v4f32 || ArgType==MVT::v4i32 ||
          ArgType==MVT::v8i16 || ArgType==MVT::v16i8) {
        if (++j > NumVRs) {
          SDValue PtrOff;
          // We are emitting Altivec params in order.
          LowerMemOpCallTo(DAG, MF, Chain, Arg, PtrOff, SPDiff, ArgOffset,
                           isPPC64, isTailCall, true, MemOpChains,
                           TailCallArguments, dl);
          ArgOffset += 16;
        }
      }
    }
  }

  if (!MemOpChains.empty())
    Chain = DAG.getNode(ISD::TokenFactor, dl, MVT::Other, MemOpChains);

  // On Darwin, R12 must contain the address of an indirect callee.  This does
  // not mean the MTCTR instruction must use R12; it's easier to model this as
  // an extra parameter, so do that.
  if (!isTailCall &&
      !dyn_cast<GlobalAddressSDNode>(Callee) &&
      !dyn_cast<ExternalSymbolSDNode>(Callee) &&
      !isBLACompatibleAddress(Callee, DAG))
    RegsToPass.push_back(std::make_pair((unsigned)(isPPC64 ? PPC::X12 :
                                                   PPC::R12), Callee));

  // Build a sequence of copy-to-reg nodes chained together with token chain
  // and flag operands which copy the outgoing args into the appropriate regs.
  SDValue InFlag;
  for (unsigned i = 0, e = RegsToPass.size(); i != e; ++i) {
    Chain = DAG.getCopyToReg(Chain, dl, RegsToPass[i].first,
                             RegsToPass[i].second, InFlag);
    InFlag = Chain.getValue(1);
  }

  if (isTailCall)
    PrepareTailCall(DAG, InFlag, Chain, dl, isPPC64, SPDiff, NumBytes, LROp,
                    FPOp, true, TailCallArguments);

  return FinishCall(CallConv, dl, isTailCall, isVarArg, DAG,
                    RegsToPass, InFlag, Chain, Callee, SPDiff, NumBytes,
                    Ins, InVals);
}

bool
PPCTargetLowering::CanLowerReturn(CallingConv::ID CallConv,
                                  MachineFunction &MF, bool isVarArg,
                                  const SmallVectorImpl<ISD::OutputArg> &Outs,
                                  LLVMContext &Context) const {
  SmallVector<CCValAssign, 16> RVLocs;
  CCState CCInfo(CallConv, isVarArg, MF, RVLocs, Context);
  return CCInfo.CheckReturn(Outs, RetCC_PPC);
}

SDValue
PPCTargetLowering::LowerReturn(SDValue Chain,
                               CallingConv::ID CallConv, bool isVarArg,
                               const SmallVectorImpl<ISD::OutputArg> &Outs,
                               const SmallVectorImpl<SDValue> &OutVals,
                               SDLoc dl, SelectionDAG &DAG) const {

  SmallVector<CCValAssign, 16> RVLocs;
  CCState CCInfo(CallConv, isVarArg, DAG.getMachineFunction(), RVLocs,
                 *DAG.getContext());
  CCInfo.AnalyzeReturn(Outs, RetCC_PPC);

  SDValue Flag;
  SmallVector<SDValue, 4> RetOps(1, Chain);

  // Copy the result values into the output registers.
  for (unsigned i = 0; i != RVLocs.size(); ++i) {
    CCValAssign &VA = RVLocs[i];
    assert(VA.isRegLoc() && "Can only return in registers!");

    SDValue Arg = OutVals[i];

    switch (VA.getLocInfo()) {
    default: llvm_unreachable("Unknown loc info!");
    case CCValAssign::Full: break;
    case CCValAssign::AExt:
      Arg = DAG.getNode(ISD::ANY_EXTEND, dl, VA.getLocVT(), Arg);
      break;
    case CCValAssign::ZExt:
      Arg = DAG.getNode(ISD::ZERO_EXTEND, dl, VA.getLocVT(), Arg);
      break;
    case CCValAssign::SExt:
      Arg = DAG.getNode(ISD::SIGN_EXTEND, dl, VA.getLocVT(), Arg);
      break;
    }

    Chain = DAG.getCopyToReg(Chain, dl, VA.getLocReg(), Arg, Flag);
    Flag = Chain.getValue(1);
    RetOps.push_back(DAG.getRegister(VA.getLocReg(), VA.getLocVT()));
  }

  RetOps[0] = Chain;  // Update chain.

  // Add the flag if we have it.
  if (Flag.getNode())
    RetOps.push_back(Flag);

  return DAG.getNode(PPCISD::RET_FLAG, dl, MVT::Other, RetOps);
}

SDValue PPCTargetLowering::LowerSTACKRESTORE(SDValue Op, SelectionDAG &DAG,
                                   const PPCSubtarget &Subtarget) const {
  // When we pop the dynamic allocation we need to restore the SP link.
  SDLoc dl(Op);

  // Get the corect type for pointers.
  EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();

  // Construct the stack pointer operand.
  bool isPPC64 = Subtarget.isPPC64();
  unsigned SP = isPPC64 ? PPC::X1 : PPC::R1;
  SDValue StackPtr = DAG.getRegister(SP, PtrVT);

  // Get the operands for the STACKRESTORE.
  SDValue Chain = Op.getOperand(0);
  SDValue SaveSP = Op.getOperand(1);

  // Load the old link SP.
  SDValue LoadLinkSP = DAG.getLoad(PtrVT, dl, Chain, StackPtr,
                                   MachinePointerInfo(),
                                   false, false, false, 0);

  // Restore the stack pointer.
  Chain = DAG.getCopyToReg(LoadLinkSP.getValue(1), dl, SP, SaveSP);

  // Store the old link SP.
  return DAG.getStore(Chain, dl, LoadLinkSP, StackPtr, MachinePointerInfo(),
                      false, false, 0);
}



SDValue
PPCTargetLowering::getReturnAddrFrameIndex(SelectionDAG & DAG) const {
  MachineFunction &MF = DAG.getMachineFunction();
  bool isPPC64 = Subtarget.isPPC64();
  bool isDarwinABI = Subtarget.isDarwinABI();
  EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();

  // Get current frame pointer save index.  The users of this index will be
  // primarily DYNALLOC instructions.
  PPCFunctionInfo *FI = MF.getInfo<PPCFunctionInfo>();
  int RASI = FI->getReturnAddrSaveIndex();

  // If the frame pointer save index hasn't been defined yet.
  if (!RASI) {
    // Find out what the fix offset of the frame pointer save area.
    int LROffset = PPCFrameLowering::getReturnSaveOffset(isPPC64, isDarwinABI);
    // Allocate the frame index for frame pointer save area.
    RASI = MF.getFrameInfo()->CreateFixedObject(isPPC64? 8 : 4, LROffset, true);
    // Save the result.
    FI->setReturnAddrSaveIndex(RASI);
  }
  return DAG.getFrameIndex(RASI, PtrVT);
}

SDValue
PPCTargetLowering::getFramePointerFrameIndex(SelectionDAG & DAG) const {
  MachineFunction &MF = DAG.getMachineFunction();
  bool isPPC64 = Subtarget.isPPC64();
  bool isDarwinABI = Subtarget.isDarwinABI();
  EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();

  // Get current frame pointer save index.  The users of this index will be
  // primarily DYNALLOC instructions.
  PPCFunctionInfo *FI = MF.getInfo<PPCFunctionInfo>();
  int FPSI = FI->getFramePointerSaveIndex();

  // If the frame pointer save index hasn't been defined yet.
  if (!FPSI) {
    // Find out what the fix offset of the frame pointer save area.
    int FPOffset = PPCFrameLowering::getFramePointerSaveOffset(isPPC64,
                                                           isDarwinABI);

    // Allocate the frame index for frame pointer save area.
    FPSI = MF.getFrameInfo()->CreateFixedObject(isPPC64? 8 : 4, FPOffset, true);
    // Save the result.
    FI->setFramePointerSaveIndex(FPSI);
  }
  return DAG.getFrameIndex(FPSI, PtrVT);
}

SDValue PPCTargetLowering::LowerDYNAMIC_STACKALLOC(SDValue Op,
                                         SelectionDAG &DAG,
                                         const PPCSubtarget &Subtarget) const {
  // Get the inputs.
  SDValue Chain = Op.getOperand(0);
  SDValue Size  = Op.getOperand(1);
  SDLoc dl(Op);

  // Get the corect type for pointers.
  EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();
  // Negate the size.
  SDValue NegSize = DAG.getNode(ISD::SUB, dl, PtrVT,
                                  DAG.getConstant(0, PtrVT), Size);
  // Construct a node for the frame pointer save index.
  SDValue FPSIdx = getFramePointerFrameIndex(DAG);
  // Build a DYNALLOC node.
  SDValue Ops[3] = { Chain, NegSize, FPSIdx };
  SDVTList VTs = DAG.getVTList(PtrVT, MVT::Other);
  return DAG.getNode(PPCISD::DYNALLOC, dl, VTs, Ops);
}

SDValue PPCTargetLowering::lowerEH_SJLJ_SETJMP(SDValue Op,
                                               SelectionDAG &DAG) const {
  SDLoc DL(Op);
  return DAG.getNode(PPCISD::EH_SJLJ_SETJMP, DL,
                     DAG.getVTList(MVT::i32, MVT::Other),
                     Op.getOperand(0), Op.getOperand(1));
}

SDValue PPCTargetLowering::lowerEH_SJLJ_LONGJMP(SDValue Op,
                                                SelectionDAG &DAG) const {
  SDLoc DL(Op);
  return DAG.getNode(PPCISD::EH_SJLJ_LONGJMP, DL, MVT::Other,
                     Op.getOperand(0), Op.getOperand(1));
}

SDValue PPCTargetLowering::LowerLOAD(SDValue Op, SelectionDAG &DAG) const {
  assert(Op.getValueType() == MVT::i1 &&
         "Custom lowering only for i1 loads");

  // First, load 8 bits into 32 bits, then truncate to 1 bit.

  SDLoc dl(Op);
  LoadSDNode *LD = cast<LoadSDNode>(Op);

  SDValue Chain = LD->getChain();
  SDValue BasePtr = LD->getBasePtr();
  MachineMemOperand *MMO = LD->getMemOperand();

  SDValue NewLD = DAG.getExtLoad(ISD::EXTLOAD, dl, getPointerTy(), Chain,
                                 BasePtr, MVT::i8, MMO);
  SDValue Result = DAG.getNode(ISD::TRUNCATE, dl, MVT::i1, NewLD);

  SDValue Ops[] = { Result, SDValue(NewLD.getNode(), 1) };
  return DAG.getMergeValues(Ops, dl);
}

SDValue PPCTargetLowering::LowerSTORE(SDValue Op, SelectionDAG &DAG) const {
  assert(Op.getOperand(1).getValueType() == MVT::i1 &&
         "Custom lowering only for i1 stores");

  // First, zero extend to 32 bits, then use a truncating store to 8 bits.

  SDLoc dl(Op);
  StoreSDNode *ST = cast<StoreSDNode>(Op);

  SDValue Chain = ST->getChain();
  SDValue BasePtr = ST->getBasePtr();
  SDValue Value = ST->getValue();
  MachineMemOperand *MMO = ST->getMemOperand();

  Value = DAG.getNode(ISD::ZERO_EXTEND, dl, getPointerTy(), Value);
  return DAG.getTruncStore(Chain, dl, Value, BasePtr, MVT::i8, MMO);
}

// FIXME: Remove this once the ANDI glue bug is fixed:
SDValue PPCTargetLowering::LowerTRUNCATE(SDValue Op, SelectionDAG &DAG) const {
  assert(Op.getValueType() == MVT::i1 &&
         "Custom lowering only for i1 results");

  SDLoc DL(Op);
  return DAG.getNode(PPCISD::ANDIo_1_GT_BIT, DL, MVT::i1,
                     Op.getOperand(0));
}

/// LowerSELECT_CC - Lower floating point select_cc's into fsel instruction when
/// possible.
SDValue PPCTargetLowering::LowerSELECT_CC(SDValue Op, SelectionDAG &DAG) const {
  // Not FP? Not a fsel.
  if (!Op.getOperand(0).getValueType().isFloatingPoint() ||
      !Op.getOperand(2).getValueType().isFloatingPoint())
    return Op;

  // We might be able to do better than this under some circumstances, but in
  // general, fsel-based lowering of select is a finite-math-only optimization.
  // For more information, see section F.3 of the 2.06 ISA specification.
  if (!DAG.getTarget().Options.NoInfsFPMath ||
      !DAG.getTarget().Options.NoNaNsFPMath)
    return Op;

  ISD::CondCode CC = cast<CondCodeSDNode>(Op.getOperand(4))->get();

  EVT ResVT = Op.getValueType();
  EVT CmpVT = Op.getOperand(0).getValueType();
  SDValue LHS = Op.getOperand(0), RHS = Op.getOperand(1);
  SDValue TV  = Op.getOperand(2), FV  = Op.getOperand(3);
  SDLoc dl(Op);

  // If the RHS of the comparison is a 0.0, we don't need to do the
  // subtraction at all.
  SDValue Sel1;
  if (isFloatingPointZero(RHS))
    switch (CC) {
    default: break;       // SETUO etc aren't handled by fsel.
    case ISD::SETNE:
      std::swap(TV, FV);
    case ISD::SETEQ:
      if (LHS.getValueType() == MVT::f32)   // Comparison is always 64-bits
        LHS = DAG.getNode(ISD::FP_EXTEND, dl, MVT::f64, LHS);
      Sel1 = DAG.getNode(PPCISD::FSEL, dl, ResVT, LHS, TV, FV);
      if (Sel1.getValueType() == MVT::f32)   // Comparison is always 64-bits
        Sel1 = DAG.getNode(ISD::FP_EXTEND, dl, MVT::f64, Sel1);
      return DAG.getNode(PPCISD::FSEL, dl, ResVT,
                         DAG.getNode(ISD::FNEG, dl, MVT::f64, LHS), Sel1, FV);
    case ISD::SETULT:
    case ISD::SETLT:
      std::swap(TV, FV);  // fsel is natively setge, swap operands for setlt
    case ISD::SETOGE:
    case ISD::SETGE:
      if (LHS.getValueType() == MVT::f32)   // Comparison is always 64-bits
        LHS = DAG.getNode(ISD::FP_EXTEND, dl, MVT::f64, LHS);
      return DAG.getNode(PPCISD::FSEL, dl, ResVT, LHS, TV, FV);
    case ISD::SETUGT:
    case ISD::SETGT:
      std::swap(TV, FV);  // fsel is natively setge, swap operands for setlt
    case ISD::SETOLE:
    case ISD::SETLE:
      if (LHS.getValueType() == MVT::f32)   // Comparison is always 64-bits
        LHS = DAG.getNode(ISD::FP_EXTEND, dl, MVT::f64, LHS);
      return DAG.getNode(PPCISD::FSEL, dl, ResVT,
                         DAG.getNode(ISD::FNEG, dl, MVT::f64, LHS), TV, FV);
    }

  SDValue Cmp;
  switch (CC) {
  default: break;       // SETUO etc aren't handled by fsel.
  case ISD::SETNE:
    std::swap(TV, FV);
  case ISD::SETEQ:
    Cmp = DAG.getNode(ISD::FSUB, dl, CmpVT, LHS, RHS);
    if (Cmp.getValueType() == MVT::f32)   // Comparison is always 64-bits
      Cmp = DAG.getNode(ISD::FP_EXTEND, dl, MVT::f64, Cmp);
    Sel1 = DAG.getNode(PPCISD::FSEL, dl, ResVT, Cmp, TV, FV);
    if (Sel1.getValueType() == MVT::f32)   // Comparison is always 64-bits
      Sel1 = DAG.getNode(ISD::FP_EXTEND, dl, MVT::f64, Sel1);
    return DAG.getNode(PPCISD::FSEL, dl, ResVT,
                       DAG.getNode(ISD::FNEG, dl, MVT::f64, Cmp), Sel1, FV);
  case ISD::SETULT:
  case ISD::SETLT:
    Cmp = DAG.getNode(ISD::FSUB, dl, CmpVT, LHS, RHS);
    if (Cmp.getValueType() == MVT::f32)   // Comparison is always 64-bits
      Cmp = DAG.getNode(ISD::FP_EXTEND, dl, MVT::f64, Cmp);
    return DAG.getNode(PPCISD::FSEL, dl, ResVT, Cmp, FV, TV);
  case ISD::SETOGE:
  case ISD::SETGE:
    Cmp = DAG.getNode(ISD::FSUB, dl, CmpVT, LHS, RHS);
    if (Cmp.getValueType() == MVT::f32)   // Comparison is always 64-bits
      Cmp = DAG.getNode(ISD::FP_EXTEND, dl, MVT::f64, Cmp);
    return DAG.getNode(PPCISD::FSEL, dl, ResVT, Cmp, TV, FV);
  case ISD::SETUGT:
  case ISD::SETGT:
    Cmp = DAG.getNode(ISD::FSUB, dl, CmpVT, RHS, LHS);
    if (Cmp.getValueType() == MVT::f32)   // Comparison is always 64-bits
      Cmp = DAG.getNode(ISD::FP_EXTEND, dl, MVT::f64, Cmp);
    return DAG.getNode(PPCISD::FSEL, dl, ResVT, Cmp, FV, TV);
  case ISD::SETOLE:
  case ISD::SETLE:
    Cmp = DAG.getNode(ISD::FSUB, dl, CmpVT, RHS, LHS);
    if (Cmp.getValueType() == MVT::f32)   // Comparison is always 64-bits
      Cmp = DAG.getNode(ISD::FP_EXTEND, dl, MVT::f64, Cmp);
    return DAG.getNode(PPCISD::FSEL, dl, ResVT, Cmp, TV, FV);
  }
  return Op;
}

// FIXME: Split this code up when LegalizeDAGTypes lands.
SDValue PPCTargetLowering::LowerFP_TO_INT(SDValue Op, SelectionDAG &DAG,
                                           SDLoc dl) const {
  assert(Op.getOperand(0).getValueType().isFloatingPoint());
  SDValue Src = Op.getOperand(0);
  if (Src.getValueType() == MVT::f32)
    Src = DAG.getNode(ISD::FP_EXTEND, dl, MVT::f64, Src);

  SDValue Tmp;
  switch (Op.getSimpleValueType().SimpleTy) {
  default: llvm_unreachable("Unhandled FP_TO_INT type in custom expander!");
  case MVT::i32:
    Tmp = DAG.getNode(Op.getOpcode()==ISD::FP_TO_SINT ? PPCISD::FCTIWZ :
                        (Subtarget.hasFPCVT() ? PPCISD::FCTIWUZ :
                                                   PPCISD::FCTIDZ),
                      dl, MVT::f64, Src);
    break;
  case MVT::i64:
    assert((Op.getOpcode() == ISD::FP_TO_SINT || Subtarget.hasFPCVT()) &&
           "i64 FP_TO_UINT is supported only with FPCVT");
    Tmp = DAG.getNode(Op.getOpcode()==ISD::FP_TO_SINT ? PPCISD::FCTIDZ :
                                                        PPCISD::FCTIDUZ,
                      dl, MVT::f64, Src);
    break;
  }

  // Convert the FP value to an int value through memory.
  bool i32Stack = Op.getValueType() == MVT::i32 && Subtarget.hasSTFIWX() &&
    (Op.getOpcode() == ISD::FP_TO_SINT || Subtarget.hasFPCVT());
  SDValue FIPtr = DAG.CreateStackTemporary(i32Stack ? MVT::i32 : MVT::f64);
  int FI = cast<FrameIndexSDNode>(FIPtr)->getIndex();
  MachinePointerInfo MPI = MachinePointerInfo::getFixedStack(FI);

  // Emit a store to the stack slot.
  SDValue Chain;
  if (i32Stack) {
    MachineFunction &MF = DAG.getMachineFunction();
    MachineMemOperand *MMO =
      MF.getMachineMemOperand(MPI, MachineMemOperand::MOStore, 4, 4);
    SDValue Ops[] = { DAG.getEntryNode(), Tmp, FIPtr };
    Chain = DAG.getMemIntrinsicNode(PPCISD::STFIWX, dl,
              DAG.getVTList(MVT::Other), Ops, MVT::i32, MMO);
  } else
    Chain = DAG.getStore(DAG.getEntryNode(), dl, Tmp, FIPtr,
                         MPI, false, false, 0);

  // Result is a load from the stack slot.  If loading 4 bytes, make sure to
  // add in a bias.
  if (Op.getValueType() == MVT::i32 && !i32Stack) {
    FIPtr = DAG.getNode(ISD::ADD, dl, FIPtr.getValueType(), FIPtr,
                        DAG.getConstant(4, FIPtr.getValueType()));
    MPI = MachinePointerInfo();
  }

  return DAG.getLoad(Op.getValueType(), dl, Chain, FIPtr, MPI,
                     false, false, false, 0);
}

SDValue PPCTargetLowering::LowerINT_TO_FP(SDValue Op,
                                           SelectionDAG &DAG) const {
  SDLoc dl(Op);
  // Don't handle ppc_fp128 here; let it be lowered to a libcall.
  if (Op.getValueType() != MVT::f32 && Op.getValueType() != MVT::f64)
    return SDValue();

  if (Op.getOperand(0).getValueType() == MVT::i1)
    return DAG.getNode(ISD::SELECT, dl, Op.getValueType(), Op.getOperand(0),
                       DAG.getConstantFP(1.0, Op.getValueType()),
                       DAG.getConstantFP(0.0, Op.getValueType()));

  assert((Op.getOpcode() == ISD::SINT_TO_FP || Subtarget.hasFPCVT()) &&
         "UINT_TO_FP is supported only with FPCVT");

  // If we have FCFIDS, then use it when converting to single-precision.
  // Otherwise, convert to double-precision and then round.
  unsigned FCFOp = (Subtarget.hasFPCVT() && Op.getValueType() == MVT::f32) ?
                   (Op.getOpcode() == ISD::UINT_TO_FP ?
                    PPCISD::FCFIDUS : PPCISD::FCFIDS) :
                   (Op.getOpcode() == ISD::UINT_TO_FP ?
                    PPCISD::FCFIDU : PPCISD::FCFID);
  MVT      FCFTy = (Subtarget.hasFPCVT() && Op.getValueType() == MVT::f32) ?
                   MVT::f32 : MVT::f64;

  if (Op.getOperand(0).getValueType() == MVT::i64) {
    SDValue SINT = Op.getOperand(0);
    // When converting to single-precision, we actually need to convert
    // to double-precision first and then round to single-precision.
    // To avoid double-rounding effects during that operation, we have
    // to prepare the input operand.  Bits that might be truncated when
    // converting to double-precision are replaced by a bit that won't
    // be lost at this stage, but is below the single-precision rounding
    // position.
    //
    // However, if -enable-unsafe-fp-math is in effect, accept double
    // rounding to avoid the extra overhead.
    if (Op.getValueType() == MVT::f32 &&
        !Subtarget.hasFPCVT() &&
        !DAG.getTarget().Options.UnsafeFPMath) {

      // Twiddle input to make sure the low 11 bits are zero.  (If this
      // is the case, we are guaranteed the value will fit into the 53 bit
      // mantissa of an IEEE double-precision value without rounding.)
      // If any of those low 11 bits were not zero originally, make sure
      // bit 12 (value 2048) is set instead, so that the final rounding
      // to single-precision gets the correct result.
      SDValue Round = DAG.getNode(ISD::AND, dl, MVT::i64,
                                  SINT, DAG.getConstant(2047, MVT::i64));
      Round = DAG.getNode(ISD::ADD, dl, MVT::i64,
                          Round, DAG.getConstant(2047, MVT::i64));
      Round = DAG.getNode(ISD::OR, dl, MVT::i64, Round, SINT);
      Round = DAG.getNode(ISD::AND, dl, MVT::i64,
                          Round, DAG.getConstant(-2048, MVT::i64));

      // However, we cannot use that value unconditionally: if the magnitude
      // of the input value is small, the bit-twiddling we did above might
      // end up visibly changing the output.  Fortunately, in that case, we
      // don't need to twiddle bits since the original input will convert
      // exactly to double-precision floating-point already.  Therefore,
      // construct a conditional to use the original value if the top 11
      // bits are all sign-bit copies, and use the rounded value computed
      // above otherwise.
      SDValue Cond = DAG.getNode(ISD::SRA, dl, MVT::i64,
                                 SINT, DAG.getConstant(53, MVT::i32));
      Cond = DAG.getNode(ISD::ADD, dl, MVT::i64,
                         Cond, DAG.getConstant(1, MVT::i64));
      Cond = DAG.getSetCC(dl, MVT::i32,
                          Cond, DAG.getConstant(1, MVT::i64), ISD::SETUGT);

      SINT = DAG.getNode(ISD::SELECT, dl, MVT::i64, Cond, Round, SINT);
    }

    SDValue Bits = DAG.getNode(ISD::BITCAST, dl, MVT::f64, SINT);
    SDValue FP = DAG.getNode(FCFOp, dl, FCFTy, Bits);

    if (Op.getValueType() == MVT::f32 && !Subtarget.hasFPCVT())
      FP = DAG.getNode(ISD::FP_ROUND, dl,
                       MVT::f32, FP, DAG.getIntPtrConstant(0));
    return FP;
  }

  assert(Op.getOperand(0).getValueType() == MVT::i32 &&
         "Unhandled INT_TO_FP type in custom expander!");
  // Since we only generate this in 64-bit mode, we can take advantage of
  // 64-bit registers.  In particular, sign extend the input value into the
  // 64-bit register with extsw, store the WHOLE 64-bit value into the stack
  // then lfd it and fcfid it.
  MachineFunction &MF = DAG.getMachineFunction();
  MachineFrameInfo *FrameInfo = MF.getFrameInfo();
  EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();

  SDValue Ld;
  if (Subtarget.hasLFIWAX() || Subtarget.hasFPCVT()) {
    int FrameIdx = FrameInfo->CreateStackObject(4, 4, false);
    SDValue FIdx = DAG.getFrameIndex(FrameIdx, PtrVT);

    SDValue Store = DAG.getStore(DAG.getEntryNode(), dl, Op.getOperand(0), FIdx,
                                 MachinePointerInfo::getFixedStack(FrameIdx),
                                 false, false, 0);

    assert(cast<StoreSDNode>(Store)->getMemoryVT() == MVT::i32 &&
           "Expected an i32 store");
    MachineMemOperand *MMO =
      MF.getMachineMemOperand(MachinePointerInfo::getFixedStack(FrameIdx),
                              MachineMemOperand::MOLoad, 4, 4);
    SDValue Ops[] = { Store, FIdx };
    Ld = DAG.getMemIntrinsicNode(Op.getOpcode() == ISD::UINT_TO_FP ?
                                   PPCISD::LFIWZX : PPCISD::LFIWAX,
                                 dl, DAG.getVTList(MVT::f64, MVT::Other),
                                 Ops, MVT::i32, MMO);
  } else {
    assert(Subtarget.isPPC64() &&
           "i32->FP without LFIWAX supported only on PPC64");

    int FrameIdx = FrameInfo->CreateStackObject(8, 8, false);
    SDValue FIdx = DAG.getFrameIndex(FrameIdx, PtrVT);

    SDValue Ext64 = DAG.getNode(ISD::SIGN_EXTEND, dl, MVT::i64,
                                Op.getOperand(0));

    // STD the extended value into the stack slot.
    SDValue Store = DAG.getStore(DAG.getEntryNode(), dl, Ext64, FIdx,
                                 MachinePointerInfo::getFixedStack(FrameIdx),
                                 false, false, 0);

    // Load the value as a double.
    Ld = DAG.getLoad(MVT::f64, dl, Store, FIdx,
                     MachinePointerInfo::getFixedStack(FrameIdx),
                     false, false, false, 0);
  }

  // FCFID it and return it.
  SDValue FP = DAG.getNode(FCFOp, dl, FCFTy, Ld);
  if (Op.getValueType() == MVT::f32 && !Subtarget.hasFPCVT())
    FP = DAG.getNode(ISD::FP_ROUND, dl, MVT::f32, FP, DAG.getIntPtrConstant(0));
  return FP;
}

SDValue PPCTargetLowering::LowerFLT_ROUNDS_(SDValue Op,
                                            SelectionDAG &DAG) const {
  SDLoc dl(Op);
  /*
   The rounding mode is in bits 30:31 of FPSR, and has the following
   settings:
     00 Round to nearest
     01 Round to 0
     10 Round to +inf
     11 Round to -inf

  FLT_ROUNDS, on the other hand, expects the following:
    -1 Undefined
     0 Round to 0
     1 Round to nearest
     2 Round to +inf
     3 Round to -inf

  To perform the conversion, we do:
    ((FPSCR & 0x3) ^ ((~FPSCR & 0x3) >> 1))
  */

  MachineFunction &MF = DAG.getMachineFunction();
  EVT VT = Op.getValueType();
  EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();

  // Save FP Control Word to register
  EVT NodeTys[] = {
    MVT::f64,    // return register
    MVT::Glue    // unused in this context
  };
  SDValue Chain = DAG.getNode(PPCISD::MFFS, dl, NodeTys, None);

  // Save FP register to stack slot
  int SSFI = MF.getFrameInfo()->CreateStackObject(8, 8, false);
  SDValue StackSlot = DAG.getFrameIndex(SSFI, PtrVT);
  SDValue Store = DAG.getStore(DAG.getEntryNode(), dl, Chain,
                               StackSlot, MachinePointerInfo(), false, false,0);

  // Load FP Control Word from low 32 bits of stack slot.
  SDValue Four = DAG.getConstant(4, PtrVT);
  SDValue Addr = DAG.getNode(ISD::ADD, dl, PtrVT, StackSlot, Four);
  SDValue CWD = DAG.getLoad(MVT::i32, dl, Store, Addr, MachinePointerInfo(),
                            false, false, false, 0);

  // Transform as necessary
  SDValue CWD1 =
    DAG.getNode(ISD::AND, dl, MVT::i32,
                CWD, DAG.getConstant(3, MVT::i32));
  SDValue CWD2 =
    DAG.getNode(ISD::SRL, dl, MVT::i32,
                DAG.getNode(ISD::AND, dl, MVT::i32,
                            DAG.getNode(ISD::XOR, dl, MVT::i32,
                                        CWD, DAG.getConstant(3, MVT::i32)),
                            DAG.getConstant(3, MVT::i32)),
                DAG.getConstant(1, MVT::i32));

  SDValue RetVal =
    DAG.getNode(ISD::XOR, dl, MVT::i32, CWD1, CWD2);

  return DAG.getNode((VT.getSizeInBits() < 16 ?
                      ISD::TRUNCATE : ISD::ZERO_EXTEND), dl, VT, RetVal);
}

SDValue PPCTargetLowering::LowerSHL_PARTS(SDValue Op, SelectionDAG &DAG) const {
  EVT VT = Op.getValueType();
  unsigned BitWidth = VT.getSizeInBits();
  SDLoc dl(Op);
  assert(Op.getNumOperands() == 3 &&
         VT == Op.getOperand(1).getValueType() &&
         "Unexpected SHL!");

  // Expand into a bunch of logical ops.  Note that these ops
  // depend on the PPC behavior for oversized shift amounts.
  SDValue Lo = Op.getOperand(0);
  SDValue Hi = Op.getOperand(1);
  SDValue Amt = Op.getOperand(2);
  EVT AmtVT = Amt.getValueType();

  SDValue Tmp1 = DAG.getNode(ISD::SUB, dl, AmtVT,
                             DAG.getConstant(BitWidth, AmtVT), Amt);
  SDValue Tmp2 = DAG.getNode(PPCISD::SHL, dl, VT, Hi, Amt);
  SDValue Tmp3 = DAG.getNode(PPCISD::SRL, dl, VT, Lo, Tmp1);
  SDValue Tmp4 = DAG.getNode(ISD::OR , dl, VT, Tmp2, Tmp3);
  SDValue Tmp5 = DAG.getNode(ISD::ADD, dl, AmtVT, Amt,
                             DAG.getConstant(-BitWidth, AmtVT));
  SDValue Tmp6 = DAG.getNode(PPCISD::SHL, dl, VT, Lo, Tmp5);
  SDValue OutHi = DAG.getNode(ISD::OR, dl, VT, Tmp4, Tmp6);
  SDValue OutLo = DAG.getNode(PPCISD::SHL, dl, VT, Lo, Amt);
  SDValue OutOps[] = { OutLo, OutHi };
  return DAG.getMergeValues(OutOps, dl);
}

SDValue PPCTargetLowering::LowerSRL_PARTS(SDValue Op, SelectionDAG &DAG) const {
  EVT VT = Op.getValueType();
  SDLoc dl(Op);
  unsigned BitWidth = VT.getSizeInBits();
  assert(Op.getNumOperands() == 3 &&
         VT == Op.getOperand(1).getValueType() &&
         "Unexpected SRL!");

  // Expand into a bunch of logical ops.  Note that these ops
  // depend on the PPC behavior for oversized shift amounts.
  SDValue Lo = Op.getOperand(0);
  SDValue Hi = Op.getOperand(1);
  SDValue Amt = Op.getOperand(2);
  EVT AmtVT = Amt.getValueType();

  SDValue Tmp1 = DAG.getNode(ISD::SUB, dl, AmtVT,
                             DAG.getConstant(BitWidth, AmtVT), Amt);
  SDValue Tmp2 = DAG.getNode(PPCISD::SRL, dl, VT, Lo, Amt);
  SDValue Tmp3 = DAG.getNode(PPCISD::SHL, dl, VT, Hi, Tmp1);
  SDValue Tmp4 = DAG.getNode(ISD::OR, dl, VT, Tmp2, Tmp3);
  SDValue Tmp5 = DAG.getNode(ISD::ADD, dl, AmtVT, Amt,
                             DAG.getConstant(-BitWidth, AmtVT));
  SDValue Tmp6 = DAG.getNode(PPCISD::SRL, dl, VT, Hi, Tmp5);
  SDValue OutLo = DAG.getNode(ISD::OR, dl, VT, Tmp4, Tmp6);
  SDValue OutHi = DAG.getNode(PPCISD::SRL, dl, VT, Hi, Amt);
  SDValue OutOps[] = { OutLo, OutHi };
  return DAG.getMergeValues(OutOps, dl);
}

SDValue PPCTargetLowering::LowerSRA_PARTS(SDValue Op, SelectionDAG &DAG) const {
  SDLoc dl(Op);
  EVT VT = Op.getValueType();
  unsigned BitWidth = VT.getSizeInBits();
  assert(Op.getNumOperands() == 3 &&
         VT == Op.getOperand(1).getValueType() &&
         "Unexpected SRA!");

  // Expand into a bunch of logical ops, followed by a select_cc.
  SDValue Lo = Op.getOperand(0);
  SDValue Hi = Op.getOperand(1);
  SDValue Amt = Op.getOperand(2);
  EVT AmtVT = Amt.getValueType();

  SDValue Tmp1 = DAG.getNode(ISD::SUB, dl, AmtVT,
                             DAG.getConstant(BitWidth, AmtVT), Amt);
  SDValue Tmp2 = DAG.getNode(PPCISD::SRL, dl, VT, Lo, Amt);
  SDValue Tmp3 = DAG.getNode(PPCISD::SHL, dl, VT, Hi, Tmp1);
  SDValue Tmp4 = DAG.getNode(ISD::OR, dl, VT, Tmp2, Tmp3);
  SDValue Tmp5 = DAG.getNode(ISD::ADD, dl, AmtVT, Amt,
                             DAG.getConstant(-BitWidth, AmtVT));
  SDValue Tmp6 = DAG.getNode(PPCISD::SRA, dl, VT, Hi, Tmp5);
  SDValue OutHi = DAG.getNode(PPCISD::SRA, dl, VT, Hi, Amt);
  SDValue OutLo = DAG.getSelectCC(dl, Tmp5, DAG.getConstant(0, AmtVT),
                                  Tmp4, Tmp6, ISD::SETLE);
  SDValue OutOps[] = { OutLo, OutHi };
  return DAG.getMergeValues(OutOps, dl);
}

//===----------------------------------------------------------------------===//
// Vector related lowering.
//

/// BuildSplatI - Build a canonical splati of Val with an element size of
/// SplatSize.  Cast the result to VT.
static SDValue BuildSplatI(int Val, unsigned SplatSize, EVT VT,
                             SelectionDAG &DAG, SDLoc dl) {
  assert(Val >= -16 && Val <= 15 && "vsplti is out of range!");

  static const EVT VTys[] = { // canonical VT to use for each size.
    MVT::v16i8, MVT::v8i16, MVT::Other, MVT::v4i32
  };

  EVT ReqVT = VT != MVT::Other ? VT : VTys[SplatSize-1];

  // Force vspltis[hw] -1 to vspltisb -1 to canonicalize.
  if (Val == -1)
    SplatSize = 1;

  EVT CanonicalVT = VTys[SplatSize-1];

  // Build a canonical splat for this value.
  SDValue Elt = DAG.getConstant(Val, MVT::i32);
  SmallVector<SDValue, 8> Ops;
  Ops.assign(CanonicalVT.getVectorNumElements(), Elt);
  SDValue Res = DAG.getNode(ISD::BUILD_VECTOR, dl, CanonicalVT, Ops);
  return DAG.getNode(ISD::BITCAST, dl, ReqVT, Res);
}

/// BuildIntrinsicOp - Return a unary operator intrinsic node with the
/// specified intrinsic ID.
static SDValue BuildIntrinsicOp(unsigned IID, SDValue Op,
                                SelectionDAG &DAG, SDLoc dl,
                                EVT DestVT = MVT::Other) {
  if (DestVT == MVT::Other) DestVT = Op.getValueType();
  return DAG.getNode(ISD::INTRINSIC_WO_CHAIN, dl, DestVT,
                     DAG.getConstant(IID, MVT::i32), Op);
}

/// BuildIntrinsicOp - Return a binary operator intrinsic node with the
/// specified intrinsic ID.
static SDValue BuildIntrinsicOp(unsigned IID, SDValue LHS, SDValue RHS,
                                SelectionDAG &DAG, SDLoc dl,
                                EVT DestVT = MVT::Other) {
  if (DestVT == MVT::Other) DestVT = LHS.getValueType();
  return DAG.getNode(ISD::INTRINSIC_WO_CHAIN, dl, DestVT,
                     DAG.getConstant(IID, MVT::i32), LHS, RHS);
}

/// BuildIntrinsicOp - Return a ternary operator intrinsic node with the
/// specified intrinsic ID.
static SDValue BuildIntrinsicOp(unsigned IID, SDValue Op0, SDValue Op1,
                                SDValue Op2, SelectionDAG &DAG,
                                SDLoc dl, EVT DestVT = MVT::Other) {
  if (DestVT == MVT::Other) DestVT = Op0.getValueType();
  return DAG.getNode(ISD::INTRINSIC_WO_CHAIN, dl, DestVT,
                     DAG.getConstant(IID, MVT::i32), Op0, Op1, Op2);
}


/// BuildVSLDOI - Return a VECTOR_SHUFFLE that is a vsldoi of the specified
/// amount.  The result has the specified value type.
static SDValue BuildVSLDOI(SDValue LHS, SDValue RHS, unsigned Amt,
                             EVT VT, SelectionDAG &DAG, SDLoc dl) {
  // Force LHS/RHS to be the right type.
  LHS = DAG.getNode(ISD::BITCAST, dl, MVT::v16i8, LHS);
  RHS = DAG.getNode(ISD::BITCAST, dl, MVT::v16i8, RHS);

  int Ops[16];
  for (unsigned i = 0; i != 16; ++i)
    Ops[i] = i + Amt;
  SDValue T = DAG.getVectorShuffle(MVT::v16i8, dl, LHS, RHS, Ops);
  return DAG.getNode(ISD::BITCAST, dl, VT, T);
}

// If this is a case we can't handle, return null and let the default
// expansion code take care of it.  If we CAN select this case, and if it
// selects to a single instruction, return Op.  Otherwise, if we can codegen
// this case more efficiently than a constant pool load, lower it to the
// sequence of ops that should be used.
SDValue PPCTargetLowering::LowerBUILD_VECTOR(SDValue Op,
                                             SelectionDAG &DAG) const {
  SDLoc dl(Op);
  BuildVectorSDNode *BVN = dyn_cast<BuildVectorSDNode>(Op.getNode());
  assert(BVN && "Expected a BuildVectorSDNode in LowerBUILD_VECTOR");

  // Check if this is a splat of a constant value.
  APInt APSplatBits, APSplatUndef;
  unsigned SplatBitSize;
  bool HasAnyUndefs;
  if (! BVN->isConstantSplat(APSplatBits, APSplatUndef, SplatBitSize,
                             HasAnyUndefs, 0, true) || SplatBitSize > 32)
    return SDValue();

  unsigned SplatBits = APSplatBits.getZExtValue();
  unsigned SplatUndef = APSplatUndef.getZExtValue();
  unsigned SplatSize = SplatBitSize / 8;

  // First, handle single instruction cases.

  // All zeros?
  if (SplatBits == 0) {
    // Canonicalize all zero vectors to be v4i32.
    if (Op.getValueType() != MVT::v4i32 || HasAnyUndefs) {
      SDValue Z = DAG.getConstant(0, MVT::i32);
      Z = DAG.getNode(ISD::BUILD_VECTOR, dl, MVT::v4i32, Z, Z, Z, Z);
      Op = DAG.getNode(ISD::BITCAST, dl, Op.getValueType(), Z);
    }
    return Op;
  }

  // If the sign extended value is in the range [-16,15], use VSPLTI[bhw].
  int32_t SextVal= (int32_t(SplatBits << (32-SplatBitSize)) >>
                    (32-SplatBitSize));
  if (SextVal >= -16 && SextVal <= 15)
    return BuildSplatI(SextVal, SplatSize, Op.getValueType(), DAG, dl);


  // Two instruction sequences.

  // If this value is in the range [-32,30] and is even, use:
  //     VSPLTI[bhw](val/2) + VSPLTI[bhw](val/2)
  // If this value is in the range [17,31] and is odd, use:
  //     VSPLTI[bhw](val-16) - VSPLTI[bhw](-16)
  // If this value is in the range [-31,-17] and is odd, use:
  //     VSPLTI[bhw](val+16) + VSPLTI[bhw](-16)
  // Note the last two are three-instruction sequences.
  if (SextVal >= -32 && SextVal <= 31) {
    // To avoid having these optimizations undone by constant folding,
    // we convert to a pseudo that will be expanded later into one of
    // the above forms.
    SDValue Elt = DAG.getConstant(SextVal, MVT::i32);
    EVT VT = (SplatSize == 1 ? MVT::v16i8 :
              (SplatSize == 2 ? MVT::v8i16 : MVT::v4i32));
    SDValue EltSize = DAG.getConstant(SplatSize, MVT::i32);
    SDValue RetVal = DAG.getNode(PPCISD::VADD_SPLAT, dl, VT, Elt, EltSize);
    if (VT == Op.getValueType())
      return RetVal;
    else
      return DAG.getNode(ISD::BITCAST, dl, Op.getValueType(), RetVal);
  }

  // If this is 0x8000_0000 x 4, turn into vspltisw + vslw.  If it is
  // 0x7FFF_FFFF x 4, turn it into not(0x8000_0000).  This is important
  // for fneg/fabs.
  if (SplatSize == 4 && SplatBits == (0x7FFFFFFF&~SplatUndef)) {
    // Make -1 and vspltisw -1:
    SDValue OnesV = BuildSplatI(-1, 4, MVT::v4i32, DAG, dl);

    // Make the VSLW intrinsic, computing 0x8000_0000.
    SDValue Res = BuildIntrinsicOp(Intrinsic::ppc_altivec_vslw, OnesV,
                                   OnesV, DAG, dl);

    // xor by OnesV to invert it.
    Res = DAG.getNode(ISD::XOR, dl, MVT::v4i32, Res, OnesV);
    return DAG.getNode(ISD::BITCAST, dl, Op.getValueType(), Res);
  }

  // The remaining cases assume either big endian element order or
  // a splat-size that equates to the element size of the vector
  // to be built.  An example that doesn't work for little endian is
  // {0, -1, 0, -1, 0, -1, 0, -1} which has a splat size of 32 bits
  // and a vector element size of 16 bits.  The code below will
  // produce the vector in big endian element order, which for little
  // endian is {-1, 0, -1, 0, -1, 0, -1, 0}.

  // For now, just avoid these optimizations in that case.
  // FIXME: Develop correct optimizations for LE with mismatched
  // splat and element sizes.

  if (Subtarget.isLittleEndian() &&
      SplatSize != Op.getValueType().getVectorElementType().getSizeInBits())
    return SDValue();

  // Check to see if this is a wide variety of vsplti*, binop self cases.
  static const signed char SplatCsts[] = {
    -1, 1, -2, 2, -3, 3, -4, 4, -5, 5, -6, 6, -7, 7,
    -8, 8, -9, 9, -10, 10, -11, 11, -12, 12, -13, 13, 14, -14, 15, -15, -16
  };

  for (unsigned idx = 0; idx < array_lengthof(SplatCsts); ++idx) {
    // Indirect through the SplatCsts array so that we favor 'vsplti -1' for
    // cases which are ambiguous (e.g. formation of 0x8000_0000).  'vsplti -1'
    int i = SplatCsts[idx];

    // Figure out what shift amount will be used by altivec if shifted by i in
    // this splat size.
    unsigned TypeShiftAmt = i & (SplatBitSize-1);

    // vsplti + shl self.
    if (SextVal == (int)((unsigned)i << TypeShiftAmt)) {
      SDValue Res = BuildSplatI(i, SplatSize, MVT::Other, DAG, dl);
      static const unsigned IIDs[] = { // Intrinsic to use for each size.
        Intrinsic::ppc_altivec_vslb, Intrinsic::ppc_altivec_vslh, 0,
        Intrinsic::ppc_altivec_vslw
      };
      Res = BuildIntrinsicOp(IIDs[SplatSize-1], Res, Res, DAG, dl);
      return DAG.getNode(ISD::BITCAST, dl, Op.getValueType(), Res);
    }

    // vsplti + srl self.
    if (SextVal == (int)((unsigned)i >> TypeShiftAmt)) {
      SDValue Res = BuildSplatI(i, SplatSize, MVT::Other, DAG, dl);
      static const unsigned IIDs[] = { // Intrinsic to use for each size.
        Intrinsic::ppc_altivec_vsrb, Intrinsic::ppc_altivec_vsrh, 0,
        Intrinsic::ppc_altivec_vsrw
      };
      Res = BuildIntrinsicOp(IIDs[SplatSize-1], Res, Res, DAG, dl);
      return DAG.getNode(ISD::BITCAST, dl, Op.getValueType(), Res);
    }

    // vsplti + sra self.
    if (SextVal == (int)((unsigned)i >> TypeShiftAmt)) {
      SDValue Res = BuildSplatI(i, SplatSize, MVT::Other, DAG, dl);
      static const unsigned IIDs[] = { // Intrinsic to use for each size.
        Intrinsic::ppc_altivec_vsrab, Intrinsic::ppc_altivec_vsrah, 0,
        Intrinsic::ppc_altivec_vsraw
      };
      Res = BuildIntrinsicOp(IIDs[SplatSize-1], Res, Res, DAG, dl);
      return DAG.getNode(ISD::BITCAST, dl, Op.getValueType(), Res);
    }

    // vsplti + rol self.
    if (SextVal == (int)(((unsigned)i << TypeShiftAmt) |
                         ((unsigned)i >> (SplatBitSize-TypeShiftAmt)))) {
      SDValue Res = BuildSplatI(i, SplatSize, MVT::Other, DAG, dl);
      static const unsigned IIDs[] = { // Intrinsic to use for each size.
        Intrinsic::ppc_altivec_vrlb, Intrinsic::ppc_altivec_vrlh, 0,
        Intrinsic::ppc_altivec_vrlw
      };
      Res = BuildIntrinsicOp(IIDs[SplatSize-1], Res, Res, DAG, dl);
      return DAG.getNode(ISD::BITCAST, dl, Op.getValueType(), Res);
    }

    // t = vsplti c, result = vsldoi t, t, 1
    if (SextVal == (int)(((unsigned)i << 8) | (i < 0 ? 0xFF : 0))) {
      SDValue T = BuildSplatI(i, SplatSize, MVT::v16i8, DAG, dl);
      return BuildVSLDOI(T, T, 1, Op.getValueType(), DAG, dl);
    }
    // t = vsplti c, result = vsldoi t, t, 2
    if (SextVal == (int)(((unsigned)i << 16) | (i < 0 ? 0xFFFF : 0))) {
      SDValue T = BuildSplatI(i, SplatSize, MVT::v16i8, DAG, dl);
      return BuildVSLDOI(T, T, 2, Op.getValueType(), DAG, dl);
    }
    // t = vsplti c, result = vsldoi t, t, 3
    if (SextVal == (int)(((unsigned)i << 24) | (i < 0 ? 0xFFFFFF : 0))) {
      SDValue T = BuildSplatI(i, SplatSize, MVT::v16i8, DAG, dl);
      return BuildVSLDOI(T, T, 3, Op.getValueType(), DAG, dl);
    }
  }

  return SDValue();
}

/// GeneratePerfectShuffle - Given an entry in the perfect-shuffle table, emit
/// the specified operations to build the shuffle.
static SDValue GeneratePerfectShuffle(unsigned PFEntry, SDValue LHS,
                                      SDValue RHS, SelectionDAG &DAG,
                                      SDLoc dl) {
  unsigned OpNum = (PFEntry >> 26) & 0x0F;
  unsigned LHSID = (PFEntry >> 13) & ((1 << 13)-1);
  unsigned RHSID = (PFEntry >>  0) & ((1 << 13)-1);

  enum {
    OP_COPY = 0,  // Copy, used for things like <u,u,u,3> to say it is <0,1,2,3>
    OP_VMRGHW,
    OP_VMRGLW,
    OP_VSPLTISW0,
    OP_VSPLTISW1,
    OP_VSPLTISW2,
    OP_VSPLTISW3,
    OP_VSLDOI4,
    OP_VSLDOI8,
    OP_VSLDOI12
  };

  if (OpNum == OP_COPY) {
    if (LHSID == (1*9+2)*9+3) return LHS;
    assert(LHSID == ((4*9+5)*9+6)*9+7 && "Illegal OP_COPY!");
    return RHS;
  }

  SDValue OpLHS, OpRHS;
  OpLHS = GeneratePerfectShuffle(PerfectShuffleTable[LHSID], LHS, RHS, DAG, dl);
  OpRHS = GeneratePerfectShuffle(PerfectShuffleTable[RHSID], LHS, RHS, DAG, dl);

  int ShufIdxs[16];
  switch (OpNum) {
  default: llvm_unreachable("Unknown i32 permute!");
  case OP_VMRGHW:
    ShufIdxs[ 0] =  0; ShufIdxs[ 1] =  1; ShufIdxs[ 2] =  2; ShufIdxs[ 3] =  3;
    ShufIdxs[ 4] = 16; ShufIdxs[ 5] = 17; ShufIdxs[ 6] = 18; ShufIdxs[ 7] = 19;
    ShufIdxs[ 8] =  4; ShufIdxs[ 9] =  5; ShufIdxs[10] =  6; ShufIdxs[11] =  7;
    ShufIdxs[12] = 20; ShufIdxs[13] = 21; ShufIdxs[14] = 22; ShufIdxs[15] = 23;
    break;
  case OP_VMRGLW:
    ShufIdxs[ 0] =  8; ShufIdxs[ 1] =  9; ShufIdxs[ 2] = 10; ShufIdxs[ 3] = 11;
    ShufIdxs[ 4] = 24; ShufIdxs[ 5] = 25; ShufIdxs[ 6] = 26; ShufIdxs[ 7] = 27;
    ShufIdxs[ 8] = 12; ShufIdxs[ 9] = 13; ShufIdxs[10] = 14; ShufIdxs[11] = 15;
    ShufIdxs[12] = 28; ShufIdxs[13] = 29; ShufIdxs[14] = 30; ShufIdxs[15] = 31;
    break;
  case OP_VSPLTISW0:
    for (unsigned i = 0; i != 16; ++i)
      ShufIdxs[i] = (i&3)+0;
    break;
  case OP_VSPLTISW1:
    for (unsigned i = 0; i != 16; ++i)
      ShufIdxs[i] = (i&3)+4;
    break;
  case OP_VSPLTISW2:
    for (unsigned i = 0; i != 16; ++i)
      ShufIdxs[i] = (i&3)+8;
    break;
  case OP_VSPLTISW3:
    for (unsigned i = 0; i != 16; ++i)
      ShufIdxs[i] = (i&3)+12;
    break;
  case OP_VSLDOI4:
    return BuildVSLDOI(OpLHS, OpRHS, 4, OpLHS.getValueType(), DAG, dl);
  case OP_VSLDOI8:
    return BuildVSLDOI(OpLHS, OpRHS, 8, OpLHS.getValueType(), DAG, dl);
  case OP_VSLDOI12:
    return BuildVSLDOI(OpLHS, OpRHS, 12, OpLHS.getValueType(), DAG, dl);
  }
  EVT VT = OpLHS.getValueType();
  OpLHS = DAG.getNode(ISD::BITCAST, dl, MVT::v16i8, OpLHS);
  OpRHS = DAG.getNode(ISD::BITCAST, dl, MVT::v16i8, OpRHS);
  SDValue T = DAG.getVectorShuffle(MVT::v16i8, dl, OpLHS, OpRHS, ShufIdxs);
  return DAG.getNode(ISD::BITCAST, dl, VT, T);
}

/// LowerVECTOR_SHUFFLE - Return the code we lower for VECTOR_SHUFFLE.  If this
/// is a shuffle we can handle in a single instruction, return it.  Otherwise,
/// return the code it can be lowered into.  Worst case, it can always be
/// lowered into a vperm.
SDValue PPCTargetLowering::LowerVECTOR_SHUFFLE(SDValue Op,
                                               SelectionDAG &DAG) const {
  SDLoc dl(Op);
  SDValue V1 = Op.getOperand(0);
  SDValue V2 = Op.getOperand(1);
  ShuffleVectorSDNode *SVOp = cast<ShuffleVectorSDNode>(Op);
  EVT VT = Op.getValueType();
  bool isLittleEndian = Subtarget.isLittleEndian();

  // Cases that are handled by instructions that take permute immediates
  // (such as vsplt*) should be left as VECTOR_SHUFFLE nodes so they can be
  // selected by the instruction selector.
  if (V2.getOpcode() == ISD::UNDEF) {
    if (PPC::isSplatShuffleMask(SVOp, 1) ||
        PPC::isSplatShuffleMask(SVOp, 2) ||
        PPC::isSplatShuffleMask(SVOp, 4) ||
        PPC::isVPKUWUMShuffleMask(SVOp, 1, DAG) ||
        PPC::isVPKUHUMShuffleMask(SVOp, 1, DAG) ||
        PPC::isVSLDOIShuffleMask(SVOp, 1, DAG) != -1 ||
        PPC::isVMRGLShuffleMask(SVOp, 1, 1, DAG) ||
        PPC::isVMRGLShuffleMask(SVOp, 2, 1, DAG) ||
        PPC::isVMRGLShuffleMask(SVOp, 4, 1, DAG) ||
        PPC::isVMRGHShuffleMask(SVOp, 1, 1, DAG) ||
        PPC::isVMRGHShuffleMask(SVOp, 2, 1, DAG) ||
        PPC::isVMRGHShuffleMask(SVOp, 4, 1, DAG)) {
      return Op;
    }
  }

  // Altivec has a variety of "shuffle immediates" that take two vector inputs
  // and produce a fixed permutation.  If any of these match, do not lower to
  // VPERM.
  unsigned int ShuffleKind = isLittleEndian ? 2 : 0;
  if (PPC::isVPKUWUMShuffleMask(SVOp, ShuffleKind, DAG) ||
      PPC::isVPKUHUMShuffleMask(SVOp, ShuffleKind, DAG) ||
      PPC::isVSLDOIShuffleMask(SVOp, ShuffleKind, DAG) != -1 ||
      PPC::isVMRGLShuffleMask(SVOp, 1, ShuffleKind, DAG) ||
      PPC::isVMRGLShuffleMask(SVOp, 2, ShuffleKind, DAG) ||
      PPC::isVMRGLShuffleMask(SVOp, 4, ShuffleKind, DAG) ||
      PPC::isVMRGHShuffleMask(SVOp, 1, ShuffleKind, DAG) ||
      PPC::isVMRGHShuffleMask(SVOp, 2, ShuffleKind, DAG) ||
      PPC::isVMRGHShuffleMask(SVOp, 4, ShuffleKind, DAG))
    return Op;

  // Check to see if this is a shuffle of 4-byte values.  If so, we can use our
  // perfect shuffle table to emit an optimal matching sequence.
  ArrayRef<int> PermMask = SVOp->getMask();

  unsigned PFIndexes[4];
  bool isFourElementShuffle = true;
  for (unsigned i = 0; i != 4 && isFourElementShuffle; ++i) { // Element number
    unsigned EltNo = 8;   // Start out undef.
    for (unsigned j = 0; j != 4; ++j) {  // Intra-element byte.
      if (PermMask[i*4+j] < 0)
        continue;   // Undef, ignore it.

      unsigned ByteSource = PermMask[i*4+j];
      if ((ByteSource & 3) != j) {
        isFourElementShuffle = false;
        break;
      }

      if (EltNo == 8) {
        EltNo = ByteSource/4;
      } else if (EltNo != ByteSource/4) {
        isFourElementShuffle = false;
        break;
      }
    }
    PFIndexes[i] = EltNo;
  }

  // If this shuffle can be expressed as a shuffle of 4-byte elements, use the
  // perfect shuffle vector to determine if it is cost effective to do this as
  // discrete instructions, or whether we should use a vperm.
  // For now, we skip this for little endian until such time as we have a
  // little-endian perfect shuffle table.
  if (isFourElementShuffle && !isLittleEndian) {
    // Compute the index in the perfect shuffle table.
    unsigned PFTableIndex =
      PFIndexes[0]*9*9*9+PFIndexes[1]*9*9+PFIndexes[2]*9+PFIndexes[3];

    unsigned PFEntry = PerfectShuffleTable[PFTableIndex];
    unsigned Cost  = (PFEntry >> 30);

    // Determining when to avoid vperm is tricky.  Many things affect the cost
    // of vperm, particularly how many times the perm mask needs to be computed.
    // For example, if the perm mask can be hoisted out of a loop or is already
    // used (perhaps because there are multiple permutes with the same shuffle
    // mask?) the vperm has a cost of 1.  OTOH, hoisting the permute mask out of
    // the loop requires an extra register.
    //
    // As a compromise, we only emit discrete instructions if the shuffle can be
    // generated in 3 or fewer operations.  When we have loop information
    // available, if this block is within a loop, we should avoid using vperm
    // for 3-operation perms and use a constant pool load instead.
    if (Cost < 3)
      return GeneratePerfectShuffle(PFEntry, V1, V2, DAG, dl);
  }

  // Lower this to a VPERM(V1, V2, V3) expression, where V3 is a constant
  // vector that will get spilled to the constant pool.
  if (V2.getOpcode() == ISD::UNDEF) V2 = V1;

  // The SHUFFLE_VECTOR mask is almost exactly what we want for vperm, except
  // that it is in input element units, not in bytes.  Convert now.

  // For little endian, the order of the input vectors is reversed, and
  // the permutation mask is complemented with respect to 31.  This is
  // necessary to produce proper semantics with the big-endian-biased vperm
  // instruction.
  EVT EltVT = V1.getValueType().getVectorElementType();
  unsigned BytesPerElement = EltVT.getSizeInBits()/8;

  SmallVector<SDValue, 16> ResultMask;
  for (unsigned i = 0, e = VT.getVectorNumElements(); i != e; ++i) {
    unsigned SrcElt = PermMask[i] < 0 ? 0 : PermMask[i];

    for (unsigned j = 0; j != BytesPerElement; ++j)
      if (isLittleEndian)
        ResultMask.push_back(DAG.getConstant(31 - (SrcElt*BytesPerElement+j),
                                             MVT::i32));
      else
        ResultMask.push_back(DAG.getConstant(SrcElt*BytesPerElement+j,
                                             MVT::i32));
  }

  SDValue VPermMask = DAG.getNode(ISD::BUILD_VECTOR, dl, MVT::v16i8,
                                  ResultMask);
  if (isLittleEndian)
    return DAG.getNode(PPCISD::VPERM, dl, V1.getValueType(),
                       V2, V1, VPermMask);
  else
    return DAG.getNode(PPCISD::VPERM, dl, V1.getValueType(),
                       V1, V2, VPermMask);
}

/// getAltivecCompareInfo - Given an intrinsic, return false if it is not an
/// altivec comparison.  If it is, return true and fill in Opc/isDot with
/// information about the intrinsic.
static bool getAltivecCompareInfo(SDValue Intrin, int &CompareOpc,
                                  bool &isDot) {
  unsigned IntrinsicID =
    cast<ConstantSDNode>(Intrin.getOperand(0))->getZExtValue();
  CompareOpc = -1;
  isDot = false;
  switch (IntrinsicID) {
  default: return false;
    // Comparison predicates.
  case Intrinsic::ppc_altivec_vcmpbfp_p:  CompareOpc = 966; isDot = 1; break;
  case Intrinsic::ppc_altivec_vcmpeqfp_p: CompareOpc = 198; isDot = 1; break;
  case Intrinsic::ppc_altivec_vcmpequb_p: CompareOpc =   6; isDot = 1; break;
  case Intrinsic::ppc_altivec_vcmpequh_p: CompareOpc =  70; isDot = 1; break;
  case Intrinsic::ppc_altivec_vcmpequw_p: CompareOpc = 134; isDot = 1; break;
  case Intrinsic::ppc_altivec_vcmpgefp_p: CompareOpc = 454; isDot = 1; break;
  case Intrinsic::ppc_altivec_vcmpgtfp_p: CompareOpc = 710; isDot = 1; break;
  case Intrinsic::ppc_altivec_vcmpgtsb_p: CompareOpc = 774; isDot = 1; break;
  case Intrinsic::ppc_altivec_vcmpgtsh_p: CompareOpc = 838; isDot = 1; break;
  case Intrinsic::ppc_altivec_vcmpgtsw_p: CompareOpc = 902; isDot = 1; break;
  case Intrinsic::ppc_altivec_vcmpgtub_p: CompareOpc = 518; isDot = 1; break;
  case Intrinsic::ppc_altivec_vcmpgtuh_p: CompareOpc = 582; isDot = 1; break;
  case Intrinsic::ppc_altivec_vcmpgtuw_p: CompareOpc = 646; isDot = 1; break;

    // Normal Comparisons.
  case Intrinsic::ppc_altivec_vcmpbfp:    CompareOpc = 966; isDot = 0; break;
  case Intrinsic::ppc_altivec_vcmpeqfp:   CompareOpc = 198; isDot = 0; break;
  case Intrinsic::ppc_altivec_vcmpequb:   CompareOpc =   6; isDot = 0; break;
  case Intrinsic::ppc_altivec_vcmpequh:   CompareOpc =  70; isDot = 0; break;
  case Intrinsic::ppc_altivec_vcmpequw:   CompareOpc = 134; isDot = 0; break;
  case Intrinsic::ppc_altivec_vcmpgefp:   CompareOpc = 454; isDot = 0; break;
  case Intrinsic::ppc_altivec_vcmpgtfp:   CompareOpc = 710; isDot = 0; break;
  case Intrinsic::ppc_altivec_vcmpgtsb:   CompareOpc = 774; isDot = 0; break;
  case Intrinsic::ppc_altivec_vcmpgtsh:   CompareOpc = 838; isDot = 0; break;
  case Intrinsic::ppc_altivec_vcmpgtsw:   CompareOpc = 902; isDot = 0; break;
  case Intrinsic::ppc_altivec_vcmpgtub:   CompareOpc = 518; isDot = 0; break;
  case Intrinsic::ppc_altivec_vcmpgtuh:   CompareOpc = 582; isDot = 0; break;
  case Intrinsic::ppc_altivec_vcmpgtuw:   CompareOpc = 646; isDot = 0; break;
  }
  return true;
}

/// LowerINTRINSIC_WO_CHAIN - If this is an intrinsic that we want to custom
/// lower, do it, otherwise return null.
SDValue PPCTargetLowering::LowerINTRINSIC_WO_CHAIN(SDValue Op,
                                                   SelectionDAG &DAG) const {
  // If this is a lowered altivec predicate compare, CompareOpc is set to the
  // opcode number of the comparison.
  SDLoc dl(Op);
  int CompareOpc;
  bool isDot;
  if (!getAltivecCompareInfo(Op, CompareOpc, isDot))
    return SDValue();    // Don't custom lower most intrinsics.

  // If this is a non-dot comparison, make the VCMP node and we are done.
  if (!isDot) {
    SDValue Tmp = DAG.getNode(PPCISD::VCMP, dl, Op.getOperand(2).getValueType(),
                              Op.getOperand(1), Op.getOperand(2),
                              DAG.getConstant(CompareOpc, MVT::i32));
    return DAG.getNode(ISD::BITCAST, dl, Op.getValueType(), Tmp);
  }

  // Create the PPCISD altivec 'dot' comparison node.
  SDValue Ops[] = {
    Op.getOperand(2),  // LHS
    Op.getOperand(3),  // RHS
    DAG.getConstant(CompareOpc, MVT::i32)
  };
  EVT VTs[] = { Op.getOperand(2).getValueType(), MVT::Glue };
  SDValue CompNode = DAG.getNode(PPCISD::VCMPo, dl, VTs, Ops);

  // Now that we have the comparison, emit a copy from the CR to a GPR.
  // This is flagged to the above dot comparison.
  SDValue Flags = DAG.getNode(PPCISD::MFOCRF, dl, MVT::i32,
                                DAG.getRegister(PPC::CR6, MVT::i32),
                                CompNode.getValue(1));

  // Unpack the result based on how the target uses it.
  unsigned BitNo;   // Bit # of CR6.
  bool InvertBit;   // Invert result?
  switch (cast<ConstantSDNode>(Op.getOperand(1))->getZExtValue()) {
  default:  // Can't happen, don't crash on invalid number though.
  case 0:   // Return the value of the EQ bit of CR6.
    BitNo = 0; InvertBit = false;
    break;
  case 1:   // Return the inverted value of the EQ bit of CR6.
    BitNo = 0; InvertBit = true;
    break;
  case 2:   // Return the value of the LT bit of CR6.
    BitNo = 2; InvertBit = false;
    break;
  case 3:   // Return the inverted value of the LT bit of CR6.
    BitNo = 2; InvertBit = true;
    break;
  }

  // Shift the bit into the low position.
  Flags = DAG.getNode(ISD::SRL, dl, MVT::i32, Flags,
                      DAG.getConstant(8-(3-BitNo), MVT::i32));
  // Isolate the bit.
  Flags = DAG.getNode(ISD::AND, dl, MVT::i32, Flags,
                      DAG.getConstant(1, MVT::i32));

  // If we are supposed to, toggle the bit.
  if (InvertBit)
    Flags = DAG.getNode(ISD::XOR, dl, MVT::i32, Flags,
                        DAG.getConstant(1, MVT::i32));
  return Flags;
}

SDValue PPCTargetLowering::LowerSIGN_EXTEND_INREG(SDValue Op,
                                                  SelectionDAG &DAG) const {
  SDLoc dl(Op);
  // For v2i64 (VSX), we can pattern patch the v2i32 case (using fp <-> int
  // instructions), but for smaller types, we need to first extend up to v2i32
  // before doing going farther.
  if (Op.getValueType() == MVT::v2i64) {
    EVT ExtVT = cast<VTSDNode>(Op.getOperand(1))->getVT();
    if (ExtVT != MVT::v2i32) {
      Op = DAG.getNode(ISD::BITCAST, dl, MVT::v4i32, Op.getOperand(0));
      Op = DAG.getNode(ISD::SIGN_EXTEND_INREG, dl, MVT::v4i32, Op,
                       DAG.getValueType(EVT::getVectorVT(*DAG.getContext(),
                                        ExtVT.getVectorElementType(), 4)));
      Op = DAG.getNode(ISD::BITCAST, dl, MVT::v2i64, Op);
      Op = DAG.getNode(ISD::SIGN_EXTEND_INREG, dl, MVT::v2i64, Op,
                       DAG.getValueType(MVT::v2i32));
    }

    return Op;
  }

  return SDValue();
}

SDValue PPCTargetLowering::LowerSCALAR_TO_VECTOR(SDValue Op,
                                                   SelectionDAG &DAG) const {
  SDLoc dl(Op);
  // Create a stack slot that is 16-byte aligned.
  MachineFrameInfo *FrameInfo = DAG.getMachineFunction().getFrameInfo();
  int FrameIdx = FrameInfo->CreateStackObject(16, 16, false);
  EVT PtrVT = getPointerTy();
  SDValue FIdx = DAG.getFrameIndex(FrameIdx, PtrVT);

  // Store the input value into Value#0 of the stack slot.
  SDValue Store = DAG.getStore(DAG.getEntryNode(), dl,
                               Op.getOperand(0), FIdx, MachinePointerInfo(),
                               false, false, 0);
  // Load it out.
  return DAG.getLoad(Op.getValueType(), dl, Store, FIdx, MachinePointerInfo(),
                     false, false, false, 0);
}

SDValue PPCTargetLowering::LowerMUL(SDValue Op, SelectionDAG &DAG) const {
  SDLoc dl(Op);
  if (Op.getValueType() == MVT::v4i32) {
    SDValue LHS = Op.getOperand(0), RHS = Op.getOperand(1);

    SDValue Zero  = BuildSplatI(  0, 1, MVT::v4i32, DAG, dl);
    SDValue Neg16 = BuildSplatI(-16, 4, MVT::v4i32, DAG, dl);//+16 as shift amt.

    SDValue RHSSwap =   // = vrlw RHS, 16
      BuildIntrinsicOp(Intrinsic::ppc_altivec_vrlw, RHS, Neg16, DAG, dl);

    // Shrinkify inputs to v8i16.
    LHS = DAG.getNode(ISD::BITCAST, dl, MVT::v8i16, LHS);
    RHS = DAG.getNode(ISD::BITCAST, dl, MVT::v8i16, RHS);
    RHSSwap = DAG.getNode(ISD::BITCAST, dl, MVT::v8i16, RHSSwap);

    // Low parts multiplied together, generating 32-bit results (we ignore the
    // top parts).
    SDValue LoProd = BuildIntrinsicOp(Intrinsic::ppc_altivec_vmulouh,
                                        LHS, RHS, DAG, dl, MVT::v4i32);

    SDValue HiProd = BuildIntrinsicOp(Intrinsic::ppc_altivec_vmsumuhm,
                                      LHS, RHSSwap, Zero, DAG, dl, MVT::v4i32);
    // Shift the high parts up 16 bits.
    HiProd = BuildIntrinsicOp(Intrinsic::ppc_altivec_vslw, HiProd,
                              Neg16, DAG, dl);
    return DAG.getNode(ISD::ADD, dl, MVT::v4i32, LoProd, HiProd);
  } else if (Op.getValueType() == MVT::v8i16) {
    SDValue LHS = Op.getOperand(0), RHS = Op.getOperand(1);

    SDValue Zero = BuildSplatI(0, 1, MVT::v8i16, DAG, dl);

    return BuildIntrinsicOp(Intrinsic::ppc_altivec_vmladduhm,
                            LHS, RHS, Zero, DAG, dl);
  } else if (Op.getValueType() == MVT::v16i8) {
    SDValue LHS = Op.getOperand(0), RHS = Op.getOperand(1);
    bool isLittleEndian = Subtarget.isLittleEndian();

    // Multiply the even 8-bit parts, producing 16-bit sums.
    SDValue EvenParts = BuildIntrinsicOp(Intrinsic::ppc_altivec_vmuleub,
                                           LHS, RHS, DAG, dl, MVT::v8i16);
    EvenParts = DAG.getNode(ISD::BITCAST, dl, MVT::v16i8, EvenParts);

    // Multiply the odd 8-bit parts, producing 16-bit sums.
    SDValue OddParts = BuildIntrinsicOp(Intrinsic::ppc_altivec_vmuloub,
                                          LHS, RHS, DAG, dl, MVT::v8i16);
    OddParts = DAG.getNode(ISD::BITCAST, dl, MVT::v16i8, OddParts);

    // Merge the results together.  Because vmuleub and vmuloub are
    // instructions with a big-endian bias, we must reverse the
    // element numbering and reverse the meaning of "odd" and "even"
    // when generating little endian code.
    int Ops[16];
    for (unsigned i = 0; i != 8; ++i) {
      if (isLittleEndian) {
        Ops[i*2  ] = 2*i;
        Ops[i*2+1] = 2*i+16;
      } else {
        Ops[i*2  ] = 2*i+1;
        Ops[i*2+1] = 2*i+1+16;
      }
    }
    if (isLittleEndian)
      return DAG.getVectorShuffle(MVT::v16i8, dl, OddParts, EvenParts, Ops);
    else
      return DAG.getVectorShuffle(MVT::v16i8, dl, EvenParts, OddParts, Ops);
  } else {
    llvm_unreachable("Unknown mul to lower!");
  }
}

/// LowerOperation - Provide custom lowering hooks for some operations.
///
SDValue PPCTargetLowering::LowerOperation(SDValue Op, SelectionDAG &DAG) const {
  switch (Op.getOpcode()) {
  default: llvm_unreachable("Wasn't expecting to be able to lower this!");
  case ISD::ConstantPool:       return LowerConstantPool(Op, DAG);
  case ISD::BlockAddress:       return LowerBlockAddress(Op, DAG);
  case ISD::GlobalAddress:      return LowerGlobalAddress(Op, DAG);
  case ISD::GlobalTLSAddress:   return LowerGlobalTLSAddress(Op, DAG);
  case ISD::JumpTable:          return LowerJumpTable(Op, DAG);
  case ISD::SETCC:              return LowerSETCC(Op, DAG);
  case ISD::INIT_TRAMPOLINE:    return LowerINIT_TRAMPOLINE(Op, DAG);
  case ISD::ADJUST_TRAMPOLINE:  return LowerADJUST_TRAMPOLINE(Op, DAG);
  case ISD::VASTART:
    return LowerVASTART(Op, DAG, Subtarget);

  case ISD::VAARG:
    return LowerVAARG(Op, DAG, Subtarget);

  case ISD::VACOPY:
    return LowerVACOPY(Op, DAG, Subtarget);

  case ISD::STACKRESTORE:       return LowerSTACKRESTORE(Op, DAG, Subtarget);
  case ISD::DYNAMIC_STACKALLOC:
    return LowerDYNAMIC_STACKALLOC(Op, DAG, Subtarget);

  case ISD::EH_SJLJ_SETJMP:     return lowerEH_SJLJ_SETJMP(Op, DAG);
  case ISD::EH_SJLJ_LONGJMP:    return lowerEH_SJLJ_LONGJMP(Op, DAG);

  case ISD::LOAD:               return LowerLOAD(Op, DAG);
  case ISD::STORE:              return LowerSTORE(Op, DAG);
  case ISD::TRUNCATE:           return LowerTRUNCATE(Op, DAG);
  case ISD::SELECT_CC:          return LowerSELECT_CC(Op, DAG);
  case ISD::FP_TO_UINT:
  case ISD::FP_TO_SINT:         return LowerFP_TO_INT(Op, DAG,
                                                       SDLoc(Op));
  case ISD::UINT_TO_FP:
  case ISD::SINT_TO_FP:         return LowerINT_TO_FP(Op, DAG);
  case ISD::FLT_ROUNDS_:        return LowerFLT_ROUNDS_(Op, DAG);

  // Lower 64-bit shifts.
  case ISD::SHL_PARTS:          return LowerSHL_PARTS(Op, DAG);
  case ISD::SRL_PARTS:          return LowerSRL_PARTS(Op, DAG);
  case ISD::SRA_PARTS:          return LowerSRA_PARTS(Op, DAG);

  // Vector-related lowering.
  case ISD::BUILD_VECTOR:       return LowerBUILD_VECTOR(Op, DAG);
  case ISD::VECTOR_SHUFFLE:     return LowerVECTOR_SHUFFLE(Op, DAG);
  case ISD::INTRINSIC_WO_CHAIN: return LowerINTRINSIC_WO_CHAIN(Op, DAG);
  case ISD::SCALAR_TO_VECTOR:   return LowerSCALAR_TO_VECTOR(Op, DAG);
  case ISD::SIGN_EXTEND_INREG:  return LowerSIGN_EXTEND_INREG(Op, DAG);
  case ISD::MUL:                return LowerMUL(Op, DAG);

  // For counter-based loop handling.
  case ISD::INTRINSIC_W_CHAIN:  return SDValue();

  // Frame & Return address.
  case ISD::RETURNADDR:         return LowerRETURNADDR(Op, DAG);
  case ISD::FRAMEADDR:          return LowerFRAMEADDR(Op, DAG);
  }
}

void PPCTargetLowering::ReplaceNodeResults(SDNode *N,
                                           SmallVectorImpl<SDValue>&Results,
                                           SelectionDAG &DAG) const {
  const TargetMachine &TM = getTargetMachine();
  SDLoc dl(N);
  switch (N->getOpcode()) {
  default:
    llvm_unreachable("Do not know how to custom type legalize this operation!");
  case ISD::INTRINSIC_W_CHAIN: {
    if (cast<ConstantSDNode>(N->getOperand(1))->getZExtValue() !=
        Intrinsic::ppc_is_decremented_ctr_nonzero)
      break;

    assert(N->getValueType(0) == MVT::i1 &&
           "Unexpected result type for CTR decrement intrinsic");
    EVT SVT = getSetCCResultType(*DAG.getContext(), N->getValueType(0));
    SDVTList VTs = DAG.getVTList(SVT, MVT::Other);
    SDValue NewInt = DAG.getNode(N->getOpcode(), dl, VTs, N->getOperand(0),
                                 N->getOperand(1)); 

    Results.push_back(NewInt);
    Results.push_back(NewInt.getValue(1));
    break;
  }
  case ISD::VAARG: {
    if (!TM.getSubtarget<PPCSubtarget>().isSVR4ABI()
        || TM.getSubtarget<PPCSubtarget>().isPPC64())
      return;

    EVT VT = N->getValueType(0);

    if (VT == MVT::i64) {
      SDValue NewNode = LowerVAARG(SDValue(N, 1), DAG, Subtarget);

      Results.push_back(NewNode);
      Results.push_back(NewNode.getValue(1));
    }
    return;
  }
  case ISD::FP_ROUND_INREG: {
    assert(N->getValueType(0) == MVT::ppcf128);
    assert(N->getOperand(0).getValueType() == MVT::ppcf128);
    SDValue Lo = DAG.getNode(ISD::EXTRACT_ELEMENT, dl,
                             MVT::f64, N->getOperand(0),
                             DAG.getIntPtrConstant(0));
    SDValue Hi = DAG.getNode(ISD::EXTRACT_ELEMENT, dl,
                             MVT::f64, N->getOperand(0),
                             DAG.getIntPtrConstant(1));

    // Add the two halves of the long double in round-to-zero mode.
    SDValue FPreg = DAG.getNode(PPCISD::FADDRTZ, dl, MVT::f64, Lo, Hi);

    // We know the low half is about to be thrown away, so just use something
    // convenient.
    Results.push_back(DAG.getNode(ISD::BUILD_PAIR, dl, MVT::ppcf128,
                                FPreg, FPreg));
    return;
  }
  case ISD::FP_TO_SINT:
    // LowerFP_TO_INT() can only handle f32 and f64.
    if (N->getOperand(0).getValueType() == MVT::ppcf128)
      return;
    Results.push_back(LowerFP_TO_INT(SDValue(N, 0), DAG, dl));
    return;
  }
}


//===----------------------------------------------------------------------===//
//  Other Lowering Code
//===----------------------------------------------------------------------===//

MachineBasicBlock *
PPCTargetLowering::EmitAtomicBinary(MachineInstr *MI, MachineBasicBlock *BB,
                                    bool is64bit, unsigned BinOpcode) const {
  // This also handles ATOMIC_SWAP, indicated by BinOpcode==0.
  const TargetInstrInfo *TII =
      getTargetMachine().getSubtargetImpl()->getInstrInfo();

  const BasicBlock *LLVM_BB = BB->getBasicBlock();
  MachineFunction *F = BB->getParent();
  MachineFunction::iterator It = BB;
  ++It;

  unsigned dest = MI->getOperand(0).getReg();
  unsigned ptrA = MI->getOperand(1).getReg();
  unsigned ptrB = MI->getOperand(2).getReg();
  unsigned incr = MI->getOperand(3).getReg();
  DebugLoc dl = MI->getDebugLoc();

  MachineBasicBlock *loopMBB = F->CreateMachineBasicBlock(LLVM_BB);
  MachineBasicBlock *exitMBB = F->CreateMachineBasicBlock(LLVM_BB);
  F->insert(It, loopMBB);
  F->insert(It, exitMBB);
  exitMBB->splice(exitMBB->begin(), BB,
                  std::next(MachineBasicBlock::iterator(MI)), BB->end());
  exitMBB->transferSuccessorsAndUpdatePHIs(BB);

  MachineRegisterInfo &RegInfo = F->getRegInfo();
  unsigned TmpReg = (!BinOpcode) ? incr :
    RegInfo.createVirtualRegister(
       is64bit ? (const TargetRegisterClass *) &PPC::G8RCRegClass :
                 (const TargetRegisterClass *) &PPC::GPRCRegClass);

  //  thisMBB:
  //   ...
  //   fallthrough --> loopMBB
  BB->addSuccessor(loopMBB);

  //  loopMBB:
  //   l[wd]arx dest, ptr
  //   add r0, dest, incr
  //   st[wd]cx. r0, ptr
  //   bne- loopMBB
  //   fallthrough --> exitMBB
  BB = loopMBB;
  BuildMI(BB, dl, TII->get(is64bit ? PPC::LDARX : PPC::LWARX), dest)
    .addReg(ptrA).addReg(ptrB);
  if (BinOpcode)
    BuildMI(BB, dl, TII->get(BinOpcode), TmpReg).addReg(incr).addReg(dest);
  BuildMI(BB, dl, TII->get(is64bit ? PPC::STDCX : PPC::STWCX))
    .addReg(TmpReg).addReg(ptrA).addReg(ptrB);
  BuildMI(BB, dl, TII->get(PPC::BCC))
    .addImm(PPC::PRED_NE).addReg(PPC::CR0).addMBB(loopMBB);
  BB->addSuccessor(loopMBB);
  BB->addSuccessor(exitMBB);

  //  exitMBB:
  //   ...
  BB = exitMBB;
  return BB;
}

MachineBasicBlock *
PPCTargetLowering::EmitPartwordAtomicBinary(MachineInstr *MI,
                                            MachineBasicBlock *BB,
                                            bool is8bit,    // operation
                                            unsigned BinOpcode) const {
  // This also handles ATOMIC_SWAP, indicated by BinOpcode==0.
  const TargetInstrInfo *TII =
      getTargetMachine().getSubtargetImpl()->getInstrInfo();
  // In 64 bit mode we have to use 64 bits for addresses, even though the
  // lwarx/stwcx are 32 bits.  With the 32-bit atomics we can use address
  // registers without caring whether they're 32 or 64, but here we're
  // doing actual arithmetic on the addresses.
  bool is64bit = Subtarget.isPPC64();
  unsigned ZeroReg = is64bit ? PPC::ZERO8 : PPC::ZERO;

  const BasicBlock *LLVM_BB = BB->getBasicBlock();
  MachineFunction *F = BB->getParent();
  MachineFunction::iterator It = BB;
  ++It;

  unsigned dest = MI->getOperand(0).getReg();
  unsigned ptrA = MI->getOperand(1).getReg();
  unsigned ptrB = MI->getOperand(2).getReg();
  unsigned incr = MI->getOperand(3).getReg();
  DebugLoc dl = MI->getDebugLoc();

  MachineBasicBlock *loopMBB = F->CreateMachineBasicBlock(LLVM_BB);
  MachineBasicBlock *exitMBB = F->CreateMachineBasicBlock(LLVM_BB);
  F->insert(It, loopMBB);
  F->insert(It, exitMBB);
  exitMBB->splice(exitMBB->begin(), BB,
                  std::next(MachineBasicBlock::iterator(MI)), BB->end());
  exitMBB->transferSuccessorsAndUpdatePHIs(BB);

  MachineRegisterInfo &RegInfo = F->getRegInfo();
  const TargetRegisterClass *RC =
    is64bit ? (const TargetRegisterClass *) &PPC::G8RCRegClass :
              (const TargetRegisterClass *) &PPC::GPRCRegClass;
  unsigned PtrReg = RegInfo.createVirtualRegister(RC);
  unsigned Shift1Reg = RegInfo.createVirtualRegister(RC);
  unsigned ShiftReg = RegInfo.createVirtualRegister(RC);
  unsigned Incr2Reg = RegInfo.createVirtualRegister(RC);
  unsigned MaskReg = RegInfo.createVirtualRegister(RC);
  unsigned Mask2Reg = RegInfo.createVirtualRegister(RC);
  unsigned Mask3Reg = RegInfo.createVirtualRegister(RC);
  unsigned Tmp2Reg = RegInfo.createVirtualRegister(RC);
  unsigned Tmp3Reg = RegInfo.createVirtualRegister(RC);
  unsigned Tmp4Reg = RegInfo.createVirtualRegister(RC);
  unsigned TmpDestReg = RegInfo.createVirtualRegister(RC);
  unsigned Ptr1Reg;
  unsigned TmpReg = (!BinOpcode) ? Incr2Reg : RegInfo.createVirtualRegister(RC);

  //  thisMBB:
  //   ...
  //   fallthrough --> loopMBB
  BB->addSuccessor(loopMBB);

  // The 4-byte load must be aligned, while a char or short may be
  // anywhere in the word.  Hence all this nasty bookkeeping code.
  //   add ptr1, ptrA, ptrB [copy if ptrA==0]
  //   rlwinm shift1, ptr1, 3, 27, 28 [3, 27, 27]
  //   xori shift, shift1, 24 [16]
  //   rlwinm ptr, ptr1, 0, 0, 29
  //   slw incr2, incr, shift
  //   li mask2, 255 [li mask3, 0; ori mask2, mask3, 65535]
  //   slw mask, mask2, shift
  //  loopMBB:
  //   lwarx tmpDest, ptr
  //   add tmp, tmpDest, incr2
  //   andc tmp2, tmpDest, mask
  //   and tmp3, tmp, mask
  //   or tmp4, tmp3, tmp2
  //   stwcx. tmp4, ptr
  //   bne- loopMBB
  //   fallthrough --> exitMBB
  //   srw dest, tmpDest, shift
  if (ptrA != ZeroReg) {
    Ptr1Reg = RegInfo.createVirtualRegister(RC);
    BuildMI(BB, dl, TII->get(is64bit ? PPC::ADD8 : PPC::ADD4), Ptr1Reg)
      .addReg(ptrA).addReg(ptrB);
  } else {
    Ptr1Reg = ptrB;
  }
  BuildMI(BB, dl, TII->get(PPC::RLWINM), Shift1Reg).addReg(Ptr1Reg)
      .addImm(3).addImm(27).addImm(is8bit ? 28 : 27);
  BuildMI(BB, dl, TII->get(is64bit ? PPC::XORI8 : PPC::XORI), ShiftReg)
      .addReg(Shift1Reg).addImm(is8bit ? 24 : 16);
  if (is64bit)
    BuildMI(BB, dl, TII->get(PPC::RLDICR), PtrReg)
      .addReg(Ptr1Reg).addImm(0).addImm(61);
  else
    BuildMI(BB, dl, TII->get(PPC::RLWINM), PtrReg)
      .addReg(Ptr1Reg).addImm(0).addImm(0).addImm(29);
  BuildMI(BB, dl, TII->get(PPC::SLW), Incr2Reg)
      .addReg(incr).addReg(ShiftReg);
  if (is8bit)
    BuildMI(BB, dl, TII->get(PPC::LI), Mask2Reg).addImm(255);
  else {
    BuildMI(BB, dl, TII->get(PPC::LI), Mask3Reg).addImm(0);
    BuildMI(BB, dl, TII->get(PPC::ORI),Mask2Reg).addReg(Mask3Reg).addImm(65535);
  }
  BuildMI(BB, dl, TII->get(PPC::SLW), MaskReg)
      .addReg(Mask2Reg).addReg(ShiftReg);

  BB = loopMBB;
  BuildMI(BB, dl, TII->get(PPC::LWARX), TmpDestReg)
    .addReg(ZeroReg).addReg(PtrReg);
  if (BinOpcode)
    BuildMI(BB, dl, TII->get(BinOpcode), TmpReg)
      .addReg(Incr2Reg).addReg(TmpDestReg);
  BuildMI(BB, dl, TII->get(is64bit ? PPC::ANDC8 : PPC::ANDC), Tmp2Reg)
    .addReg(TmpDestReg).addReg(MaskReg);
  BuildMI(BB, dl, TII->get(is64bit ? PPC::AND8 : PPC::AND), Tmp3Reg)
    .addReg(TmpReg).addReg(MaskReg);
  BuildMI(BB, dl, TII->get(is64bit ? PPC::OR8 : PPC::OR), Tmp4Reg)
    .addReg(Tmp3Reg).addReg(Tmp2Reg);
  BuildMI(BB, dl, TII->get(PPC::STWCX))
    .addReg(Tmp4Reg).addReg(ZeroReg).addReg(PtrReg);
  BuildMI(BB, dl, TII->get(PPC::BCC))
    .addImm(PPC::PRED_NE).addReg(PPC::CR0).addMBB(loopMBB);
  BB->addSuccessor(loopMBB);
  BB->addSuccessor(exitMBB);

  //  exitMBB:
  //   ...
  BB = exitMBB;
  BuildMI(*BB, BB->begin(), dl, TII->get(PPC::SRW), dest).addReg(TmpDestReg)
    .addReg(ShiftReg);
  return BB;
}

llvm::MachineBasicBlock*
PPCTargetLowering::emitEHSjLjSetJmp(MachineInstr *MI,
                                    MachineBasicBlock *MBB) const {
  DebugLoc DL = MI->getDebugLoc();
  const TargetInstrInfo *TII =
      getTargetMachine().getSubtargetImpl()->getInstrInfo();

  MachineFunction *MF = MBB->getParent();
  MachineRegisterInfo &MRI = MF->getRegInfo();

  const BasicBlock *BB = MBB->getBasicBlock();
  MachineFunction::iterator I = MBB;
  ++I;

  // Memory Reference
  MachineInstr::mmo_iterator MMOBegin = MI->memoperands_begin();
  MachineInstr::mmo_iterator MMOEnd = MI->memoperands_end();

  unsigned DstReg = MI->getOperand(0).getReg();
  const TargetRegisterClass *RC = MRI.getRegClass(DstReg);
  assert(RC->hasType(MVT::i32) && "Invalid destination!");
  unsigned mainDstReg = MRI.createVirtualRegister(RC);
  unsigned restoreDstReg = MRI.createVirtualRegister(RC);

  MVT PVT = getPointerTy();
  assert((PVT == MVT::i64 || PVT == MVT::i32) &&
         "Invalid Pointer Size!");
  // For v = setjmp(buf), we generate
  //
  // thisMBB:
  //  SjLjSetup mainMBB
  //  bl mainMBB
  //  v_restore = 1
  //  b sinkMBB
  //
  // mainMBB:
  //  buf[LabelOffset] = LR
  //  v_main = 0
  //
  // sinkMBB:
  //  v = phi(main, restore)
  //

  MachineBasicBlock *thisMBB = MBB;
  MachineBasicBlock *mainMBB = MF->CreateMachineBasicBlock(BB);
  MachineBasicBlock *sinkMBB = MF->CreateMachineBasicBlock(BB);
  MF->insert(I, mainMBB);
  MF->insert(I, sinkMBB);

  MachineInstrBuilder MIB;

  // Transfer the remainder of BB and its successor edges to sinkMBB.
  sinkMBB->splice(sinkMBB->begin(), MBB,
                  std::next(MachineBasicBlock::iterator(MI)), MBB->end());
  sinkMBB->transferSuccessorsAndUpdatePHIs(MBB);

  // Note that the structure of the jmp_buf used here is not compatible
  // with that used by libc, and is not designed to be. Specifically, it
  // stores only those 'reserved' registers that LLVM does not otherwise
  // understand how to spill. Also, by convention, by the time this
  // intrinsic is called, Clang has already stored the frame address in the
  // first slot of the buffer and stack address in the third. Following the
  // X86 target code, we'll store the jump address in the second slot. We also
  // need to save the TOC pointer (R2) to handle jumps between shared
  // libraries, and that will be stored in the fourth slot. The thread
  // identifier (R13) is not affected.

  // thisMBB:
  const int64_t LabelOffset = 1 * PVT.getStoreSize();
  const int64_t TOCOffset   = 3 * PVT.getStoreSize();
  const int64_t BPOffset    = 4 * PVT.getStoreSize();

  // Prepare IP either in reg.
  const TargetRegisterClass *PtrRC = getRegClassFor(PVT);
  unsigned LabelReg = MRI.createVirtualRegister(PtrRC);
  unsigned BufReg = MI->getOperand(1).getReg();

  if (Subtarget.isPPC64() && Subtarget.isSVR4ABI()) {
    MIB = BuildMI(*thisMBB, MI, DL, TII->get(PPC::STD))
            .addReg(PPC::X2)
            .addImm(TOCOffset)
            .addReg(BufReg);
    MIB.setMemRefs(MMOBegin, MMOEnd);
  }

  // Naked functions never have a base pointer, and so we use r1. For all
  // other functions, this decision must be delayed until during PEI.
  unsigned BaseReg;
  if (MF->getFunction()->getAttributes().hasAttribute(
          AttributeSet::FunctionIndex, Attribute::Naked))
    BaseReg = Subtarget.isPPC64() ? PPC::X1 : PPC::R1;
  else
    BaseReg = Subtarget.isPPC64() ? PPC::BP8 : PPC::BP;

  MIB = BuildMI(*thisMBB, MI, DL,
                TII->get(Subtarget.isPPC64() ? PPC::STD : PPC::STW))
          .addReg(BaseReg)
          .addImm(BPOffset)
          .addReg(BufReg);
  MIB.setMemRefs(MMOBegin, MMOEnd);

  // Setup
  MIB = BuildMI(*thisMBB, MI, DL, TII->get(PPC::BCLalways)).addMBB(mainMBB);
  const PPCRegisterInfo *TRI =
      getTargetMachine().getSubtarget<PPCSubtarget>().getRegisterInfo();
  MIB.addRegMask(TRI->getNoPreservedMask());

  BuildMI(*thisMBB, MI, DL, TII->get(PPC::LI), restoreDstReg).addImm(1);

  MIB = BuildMI(*thisMBB, MI, DL, TII->get(PPC::EH_SjLj_Setup))
          .addMBB(mainMBB);
  MIB = BuildMI(*thisMBB, MI, DL, TII->get(PPC::B)).addMBB(sinkMBB);

  thisMBB->addSuccessor(mainMBB, /* weight */ 0);
  thisMBB->addSuccessor(sinkMBB, /* weight */ 1);

  // mainMBB:
  //  mainDstReg = 0
  MIB = BuildMI(mainMBB, DL,
    TII->get(Subtarget.isPPC64() ? PPC::MFLR8 : PPC::MFLR), LabelReg);

  // Store IP
  if (Subtarget.isPPC64()) {
    MIB = BuildMI(mainMBB, DL, TII->get(PPC::STD))
            .addReg(LabelReg)
            .addImm(LabelOffset)
            .addReg(BufReg);
  } else {
    MIB = BuildMI(mainMBB, DL, TII->get(PPC::STW))
            .addReg(LabelReg)
            .addImm(LabelOffset)
            .addReg(BufReg);
  }

  MIB.setMemRefs(MMOBegin, MMOEnd);

  BuildMI(mainMBB, DL, TII->get(PPC::LI), mainDstReg).addImm(0);
  mainMBB->addSuccessor(sinkMBB);

  // sinkMBB:
  BuildMI(*sinkMBB, sinkMBB->begin(), DL,
          TII->get(PPC::PHI), DstReg)
    .addReg(mainDstReg).addMBB(mainMBB)
    .addReg(restoreDstReg).addMBB(thisMBB);

  MI->eraseFromParent();
  return sinkMBB;
}

MachineBasicBlock *
PPCTargetLowering::emitEHSjLjLongJmp(MachineInstr *MI,
                                     MachineBasicBlock *MBB) const {
  DebugLoc DL = MI->getDebugLoc();
  const TargetInstrInfo *TII =
      getTargetMachine().getSubtargetImpl()->getInstrInfo();

  MachineFunction *MF = MBB->getParent();
  MachineRegisterInfo &MRI = MF->getRegInfo();

  // Memory Reference
  MachineInstr::mmo_iterator MMOBegin = MI->memoperands_begin();
  MachineInstr::mmo_iterator MMOEnd = MI->memoperands_end();

  MVT PVT = getPointerTy();
  assert((PVT == MVT::i64 || PVT == MVT::i32) &&
         "Invalid Pointer Size!");

  const TargetRegisterClass *RC =
    (PVT == MVT::i64) ? &PPC::G8RCRegClass : &PPC::GPRCRegClass;
  unsigned Tmp = MRI.createVirtualRegister(RC);
  // Since FP is only updated here but NOT referenced, it's treated as GPR.
  unsigned FP  = (PVT == MVT::i64) ? PPC::X31 : PPC::R31;
  unsigned SP  = (PVT == MVT::i64) ? PPC::X1 : PPC::R1;
  unsigned BP  = (PVT == MVT::i64) ? PPC::X30 :
                  (Subtarget.isSVR4ABI() &&
                   MF->getTarget().getRelocationModel() == Reloc::PIC_ ?
                     PPC::R29 : PPC::R30);

  MachineInstrBuilder MIB;

  const int64_t LabelOffset = 1 * PVT.getStoreSize();
  const int64_t SPOffset    = 2 * PVT.getStoreSize();
  const int64_t TOCOffset   = 3 * PVT.getStoreSize();
  const int64_t BPOffset    = 4 * PVT.getStoreSize();

  unsigned BufReg = MI->getOperand(0).getReg();

  // Reload FP (the jumped-to function may not have had a
  // frame pointer, and if so, then its r31 will be restored
  // as necessary).
  if (PVT == MVT::i64) {
    MIB = BuildMI(*MBB, MI, DL, TII->get(PPC::LD), FP)
            .addImm(0)
            .addReg(BufReg);
  } else {
    MIB = BuildMI(*MBB, MI, DL, TII->get(PPC::LWZ), FP)
            .addImm(0)
            .addReg(BufReg);
  }
  MIB.setMemRefs(MMOBegin, MMOEnd);

  // Reload IP
  if (PVT == MVT::i64) {
    MIB = BuildMI(*MBB, MI, DL, TII->get(PPC::LD), Tmp)
            .addImm(LabelOffset)
            .addReg(BufReg);
  } else {
    MIB = BuildMI(*MBB, MI, DL, TII->get(PPC::LWZ), Tmp)
            .addImm(LabelOffset)
            .addReg(BufReg);
  }
  MIB.setMemRefs(MMOBegin, MMOEnd);

  // Reload SP
  if (PVT == MVT::i64) {
    MIB = BuildMI(*MBB, MI, DL, TII->get(PPC::LD), SP)
            .addImm(SPOffset)
            .addReg(BufReg);
  } else {
    MIB = BuildMI(*MBB, MI, DL, TII->get(PPC::LWZ), SP)
            .addImm(SPOffset)
            .addReg(BufReg);
  }
  MIB.setMemRefs(MMOBegin, MMOEnd);

  // Reload BP
  if (PVT == MVT::i64) {
    MIB = BuildMI(*MBB, MI, DL, TII->get(PPC::LD), BP)
            .addImm(BPOffset)
            .addReg(BufReg);
  } else {
    MIB = BuildMI(*MBB, MI, DL, TII->get(PPC::LWZ), BP)
            .addImm(BPOffset)
            .addReg(BufReg);
  }
  MIB.setMemRefs(MMOBegin, MMOEnd);

  // Reload TOC
  if (PVT == MVT::i64 && Subtarget.isSVR4ABI()) {
    MIB = BuildMI(*MBB, MI, DL, TII->get(PPC::LD), PPC::X2)
            .addImm(TOCOffset)
            .addReg(BufReg);

    MIB.setMemRefs(MMOBegin, MMOEnd);
  }

  // Jump
  BuildMI(*MBB, MI, DL,
          TII->get(PVT == MVT::i64 ? PPC::MTCTR8 : PPC::MTCTR)).addReg(Tmp);
  BuildMI(*MBB, MI, DL, TII->get(PVT == MVT::i64 ? PPC::BCTR8 : PPC::BCTR));

  MI->eraseFromParent();
  return MBB;
}

MachineBasicBlock *
PPCTargetLowering::EmitInstrWithCustomInserter(MachineInstr *MI,
                                               MachineBasicBlock *BB) const {
  if (MI->getOpcode() == PPC::EH_SjLj_SetJmp32 ||
      MI->getOpcode() == PPC::EH_SjLj_SetJmp64) {
    return emitEHSjLjSetJmp(MI, BB);
  } else if (MI->getOpcode() == PPC::EH_SjLj_LongJmp32 ||
             MI->getOpcode() == PPC::EH_SjLj_LongJmp64) {
    return emitEHSjLjLongJmp(MI, BB);
  }

  const TargetInstrInfo *TII =
      getTargetMachine().getSubtargetImpl()->getInstrInfo();

  // To "insert" these instructions we actually have to insert their
  // control-flow patterns.
  const BasicBlock *LLVM_BB = BB->getBasicBlock();
  MachineFunction::iterator It = BB;
  ++It;

  MachineFunction *F = BB->getParent();

  if (Subtarget.hasISEL() && (MI->getOpcode() == PPC::SELECT_CC_I4 ||
                                 MI->getOpcode() == PPC::SELECT_CC_I8 ||
                                 MI->getOpcode() == PPC::SELECT_I4 ||
                                 MI->getOpcode() == PPC::SELECT_I8)) {
    SmallVector<MachineOperand, 2> Cond;
    if (MI->getOpcode() == PPC::SELECT_CC_I4 ||
        MI->getOpcode() == PPC::SELECT_CC_I8)
      Cond.push_back(MI->getOperand(4));
    else
      Cond.push_back(MachineOperand::CreateImm(PPC::PRED_BIT_SET));
    Cond.push_back(MI->getOperand(1));

    DebugLoc dl = MI->getDebugLoc();
    const TargetInstrInfo *TII =
        getTargetMachine().getSubtargetImpl()->getInstrInfo();
    TII->insertSelect(*BB, MI, dl, MI->getOperand(0).getReg(),
                      Cond, MI->getOperand(2).getReg(),
                      MI->getOperand(3).getReg());
  } else if (MI->getOpcode() == PPC::SELECT_CC_I4 ||
             MI->getOpcode() == PPC::SELECT_CC_I8 ||
             MI->getOpcode() == PPC::SELECT_CC_F4 ||
             MI->getOpcode() == PPC::SELECT_CC_F8 ||
             MI->getOpcode() == PPC::SELECT_CC_VRRC ||
             MI->getOpcode() == PPC::SELECT_I4 ||
             MI->getOpcode() == PPC::SELECT_I8 ||
             MI->getOpcode() == PPC::SELECT_F4 ||
             MI->getOpcode() == PPC::SELECT_F8 ||
             MI->getOpcode() == PPC::SELECT_VRRC) {
    // The incoming instruction knows the destination vreg to set, the
    // condition code register to branch on, the true/false values to
    // select between, and a branch opcode to use.

    //  thisMBB:
    //  ...
    //   TrueVal = ...
    //   cmpTY ccX, r1, r2
    //   bCC copy1MBB
    //   fallthrough --> copy0MBB
    MachineBasicBlock *thisMBB = BB;
    MachineBasicBlock *copy0MBB = F->CreateMachineBasicBlock(LLVM_BB);
    MachineBasicBlock *sinkMBB = F->CreateMachineBasicBlock(LLVM_BB);
    DebugLoc dl = MI->getDebugLoc();
    F->insert(It, copy0MBB);
    F->insert(It, sinkMBB);

    // Transfer the remainder of BB and its successor edges to sinkMBB.
    sinkMBB->splice(sinkMBB->begin(), BB,
                    std::next(MachineBasicBlock::iterator(MI)), BB->end());
    sinkMBB->transferSuccessorsAndUpdatePHIs(BB);

    // Next, add the true and fallthrough blocks as its successors.
    BB->addSuccessor(copy0MBB);
    BB->addSuccessor(sinkMBB);

    if (MI->getOpcode() == PPC::SELECT_I4 ||
        MI->getOpcode() == PPC::SELECT_I8 ||
        MI->getOpcode() == PPC::SELECT_F4 ||
        MI->getOpcode() == PPC::SELECT_F8 ||
        MI->getOpcode() == PPC::SELECT_VRRC) {
      BuildMI(BB, dl, TII->get(PPC::BC))
        .addReg(MI->getOperand(1).getReg()).addMBB(sinkMBB);
    } else {
      unsigned SelectPred = MI->getOperand(4).getImm();
      BuildMI(BB, dl, TII->get(PPC::BCC))
        .addImm(SelectPred).addReg(MI->getOperand(1).getReg()).addMBB(sinkMBB);
    }

    //  copy0MBB:
    //   %FalseValue = ...
    //   # fallthrough to sinkMBB
    BB = copy0MBB;

    // Update machine-CFG edges
    BB->addSuccessor(sinkMBB);

    //  sinkMBB:
    //   %Result = phi [ %FalseValue, copy0MBB ], [ %TrueValue, thisMBB ]
    //  ...
    BB = sinkMBB;
    BuildMI(*BB, BB->begin(), dl,
            TII->get(PPC::PHI), MI->getOperand(0).getReg())
      .addReg(MI->getOperand(3).getReg()).addMBB(copy0MBB)
      .addReg(MI->getOperand(2).getReg()).addMBB(thisMBB);
  }
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_ADD_I8)
    BB = EmitPartwordAtomicBinary(MI, BB, true, PPC::ADD4);
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_ADD_I16)
    BB = EmitPartwordAtomicBinary(MI, BB, false, PPC::ADD4);
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_ADD_I32)
    BB = EmitAtomicBinary(MI, BB, false, PPC::ADD4);
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_ADD_I64)
    BB = EmitAtomicBinary(MI, BB, true, PPC::ADD8);

  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_AND_I8)
    BB = EmitPartwordAtomicBinary(MI, BB, true, PPC::AND);
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_AND_I16)
    BB = EmitPartwordAtomicBinary(MI, BB, false, PPC::AND);
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_AND_I32)
    BB = EmitAtomicBinary(MI, BB, false, PPC::AND);
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_AND_I64)
    BB = EmitAtomicBinary(MI, BB, true, PPC::AND8);

  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_OR_I8)
    BB = EmitPartwordAtomicBinary(MI, BB, true, PPC::OR);
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_OR_I16)
    BB = EmitPartwordAtomicBinary(MI, BB, false, PPC::OR);
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_OR_I32)
    BB = EmitAtomicBinary(MI, BB, false, PPC::OR);
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_OR_I64)
    BB = EmitAtomicBinary(MI, BB, true, PPC::OR8);

  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_XOR_I8)
    BB = EmitPartwordAtomicBinary(MI, BB, true, PPC::XOR);
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_XOR_I16)
    BB = EmitPartwordAtomicBinary(MI, BB, false, PPC::XOR);
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_XOR_I32)
    BB = EmitAtomicBinary(MI, BB, false, PPC::XOR);
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_XOR_I64)
    BB = EmitAtomicBinary(MI, BB, true, PPC::XOR8);

  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_NAND_I8)
    BB = EmitPartwordAtomicBinary(MI, BB, true, PPC::NAND);
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_NAND_I16)
    BB = EmitPartwordAtomicBinary(MI, BB, false, PPC::NAND);
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_NAND_I32)
    BB = EmitAtomicBinary(MI, BB, false, PPC::NAND);
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_NAND_I64)
    BB = EmitAtomicBinary(MI, BB, true, PPC::NAND8);

  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_SUB_I8)
    BB = EmitPartwordAtomicBinary(MI, BB, true, PPC::SUBF);
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_SUB_I16)
    BB = EmitPartwordAtomicBinary(MI, BB, false, PPC::SUBF);
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_SUB_I32)
    BB = EmitAtomicBinary(MI, BB, false, PPC::SUBF);
  else if (MI->getOpcode() == PPC::ATOMIC_LOAD_SUB_I64)
    BB = EmitAtomicBinary(MI, BB, true, PPC::SUBF8);

  else if (MI->getOpcode() == PPC::ATOMIC_SWAP_I8)
    BB = EmitPartwordAtomicBinary(MI, BB, true, 0);
  else if (MI->getOpcode() == PPC::ATOMIC_SWAP_I16)
    BB = EmitPartwordAtomicBinary(MI, BB, false, 0);
  else if (MI->getOpcode() == PPC::ATOMIC_SWAP_I32)
    BB = EmitAtomicBinary(MI, BB, false, 0);
  else if (MI->getOpcode() == PPC::ATOMIC_SWAP_I64)
    BB = EmitAtomicBinary(MI, BB, true, 0);

  else if (MI->getOpcode() == PPC::ATOMIC_CMP_SWAP_I32 ||
           MI->getOpcode() == PPC::ATOMIC_CMP_SWAP_I64) {
    bool is64bit = MI->getOpcode() == PPC::ATOMIC_CMP_SWAP_I64;

    unsigned dest   = MI->getOperand(0).getReg();
    unsigned ptrA   = MI->getOperand(1).getReg();
    unsigned ptrB   = MI->getOperand(2).getReg();
    unsigned oldval = MI->getOperand(3).getReg();
    unsigned newval = MI->getOperand(4).getReg();
    DebugLoc dl     = MI->getDebugLoc();

    MachineBasicBlock *loop1MBB = F->CreateMachineBasicBlock(LLVM_BB);
    MachineBasicBlock *loop2MBB = F->CreateMachineBasicBlock(LLVM_BB);
    MachineBasicBlock *midMBB = F->CreateMachineBasicBlock(LLVM_BB);
    MachineBasicBlock *exitMBB = F->CreateMachineBasicBlock(LLVM_BB);
    F->insert(It, loop1MBB);
    F->insert(It, loop2MBB);
    F->insert(It, midMBB);
    F->insert(It, exitMBB);
    exitMBB->splice(exitMBB->begin(), BB,
                    std::next(MachineBasicBlock::iterator(MI)), BB->end());
    exitMBB->transferSuccessorsAndUpdatePHIs(BB);

    //  thisMBB:
    //   ...
    //   fallthrough --> loopMBB
    BB->addSuccessor(loop1MBB);

    // loop1MBB:
    //   l[wd]arx dest, ptr
    //   cmp[wd] dest, oldval
    //   bne- midMBB
    // loop2MBB:
    //   st[wd]cx. newval, ptr
    //   bne- loopMBB
    //   b exitBB
    // midMBB:
    //   st[wd]cx. dest, ptr
    // exitBB:
    BB = loop1MBB;
    BuildMI(BB, dl, TII->get(is64bit ? PPC::LDARX : PPC::LWARX), dest)
      .addReg(ptrA).addReg(ptrB);
    BuildMI(BB, dl, TII->get(is64bit ? PPC::CMPD : PPC::CMPW), PPC::CR0)
      .addReg(oldval).addReg(dest);
    BuildMI(BB, dl, TII->get(PPC::BCC))
      .addImm(PPC::PRED_NE).addReg(PPC::CR0).addMBB(midMBB);
    BB->addSuccessor(loop2MBB);
    BB->addSuccessor(midMBB);

    BB = loop2MBB;
    BuildMI(BB, dl, TII->get(is64bit ? PPC::STDCX : PPC::STWCX))
      .addReg(newval).addReg(ptrA).addReg(ptrB);
    BuildMI(BB, dl, TII->get(PPC::BCC))
      .addImm(PPC::PRED_NE).addReg(PPC::CR0).addMBB(loop1MBB);
    BuildMI(BB, dl, TII->get(PPC::B)).addMBB(exitMBB);
    BB->addSuccessor(loop1MBB);
    BB->addSuccessor(exitMBB);

    BB = midMBB;
    BuildMI(BB, dl, TII->get(is64bit ? PPC::STDCX : PPC::STWCX))
      .addReg(dest).addReg(ptrA).addReg(ptrB);
    BB->addSuccessor(exitMBB);

    //  exitMBB:
    //   ...
    BB = exitMBB;
  } else if (MI->getOpcode() == PPC::ATOMIC_CMP_SWAP_I8 ||
             MI->getOpcode() == PPC::ATOMIC_CMP_SWAP_I16) {
    // We must use 64-bit registers for addresses when targeting 64-bit,
    // since we're actually doing arithmetic on them.  Other registers
    // can be 32-bit.
    bool is64bit = Subtarget.isPPC64();
    bool is8bit = MI->getOpcode() == PPC::ATOMIC_CMP_SWAP_I8;

    unsigned dest   = MI->getOperand(0).getReg();
    unsigned ptrA   = MI->getOperand(1).getReg();
    unsigned ptrB   = MI->getOperand(2).getReg();
    unsigned oldval = MI->getOperand(3).getReg();
    unsigned newval = MI->getOperand(4).getReg();
    DebugLoc dl     = MI->getDebugLoc();

    MachineBasicBlock *loop1MBB = F->CreateMachineBasicBlock(LLVM_BB);
    MachineBasicBlock *loop2MBB = F->CreateMachineBasicBlock(LLVM_BB);
    MachineBasicBlock *midMBB = F->CreateMachineBasicBlock(LLVM_BB);
    MachineBasicBlock *exitMBB = F->CreateMachineBasicBlock(LLVM_BB);
    F->insert(It, loop1MBB);
    F->insert(It, loop2MBB);
    F->insert(It, midMBB);
    F->insert(It, exitMBB);
    exitMBB->splice(exitMBB->begin(), BB,
                    std::next(MachineBasicBlock::iterator(MI)), BB->end());
    exitMBB->transferSuccessorsAndUpdatePHIs(BB);

    MachineRegisterInfo &RegInfo = F->getRegInfo();
    const TargetRegisterClass *RC =
      is64bit ? (const TargetRegisterClass *) &PPC::G8RCRegClass :
                (const TargetRegisterClass *) &PPC::GPRCRegClass;
    unsigned PtrReg = RegInfo.createVirtualRegister(RC);
    unsigned Shift1Reg = RegInfo.createVirtualRegister(RC);
    unsigned ShiftReg = RegInfo.createVirtualRegister(RC);
    unsigned NewVal2Reg = RegInfo.createVirtualRegister(RC);
    unsigned NewVal3Reg = RegInfo.createVirtualRegister(RC);
    unsigned OldVal2Reg = RegInfo.createVirtualRegister(RC);
    unsigned OldVal3Reg = RegInfo.createVirtualRegister(RC);
    unsigned MaskReg = RegInfo.createVirtualRegister(RC);
    unsigned Mask2Reg = RegInfo.createVirtualRegister(RC);
    unsigned Mask3Reg = RegInfo.createVirtualRegister(RC);
    unsigned Tmp2Reg = RegInfo.createVirtualRegister(RC);
    unsigned Tmp4Reg = RegInfo.createVirtualRegister(RC);
    unsigned TmpDestReg = RegInfo.createVirtualRegister(RC);
    unsigned Ptr1Reg;
    unsigned TmpReg = RegInfo.createVirtualRegister(RC);
    unsigned ZeroReg = is64bit ? PPC::ZERO8 : PPC::ZERO;
    //  thisMBB:
    //   ...
    //   fallthrough --> loopMBB
    BB->addSuccessor(loop1MBB);

    // The 4-byte load must be aligned, while a char or short may be
    // anywhere in the word.  Hence all this nasty bookkeeping code.
    //   add ptr1, ptrA, ptrB [copy if ptrA==0]
    //   rlwinm shift1, ptr1, 3, 27, 28 [3, 27, 27]
    //   xori shift, shift1, 24 [16]
    //   rlwinm ptr, ptr1, 0, 0, 29
    //   slw newval2, newval, shift
    //   slw oldval2, oldval,shift
    //   li mask2, 255 [li mask3, 0; ori mask2, mask3, 65535]
    //   slw mask, mask2, shift
    //   and newval3, newval2, mask
    //   and oldval3, oldval2, mask
    // loop1MBB:
    //   lwarx tmpDest, ptr
    //   and tmp, tmpDest, mask
    //   cmpw tmp, oldval3
    //   bne- midMBB
    // loop2MBB:
    //   andc tmp2, tmpDest, mask
    //   or tmp4, tmp2, newval3
    //   stwcx. tmp4, ptr
    //   bne- loop1MBB
    //   b exitBB
    // midMBB:
    //   stwcx. tmpDest, ptr
    // exitBB:
    //   srw dest, tmpDest, shift
    if (ptrA != ZeroReg) {
      Ptr1Reg = RegInfo.createVirtualRegister(RC);
      BuildMI(BB, dl, TII->get(is64bit ? PPC::ADD8 : PPC::ADD4), Ptr1Reg)
        .addReg(ptrA).addReg(ptrB);
    } else {
      Ptr1Reg = ptrB;
    }
    BuildMI(BB, dl, TII->get(PPC::RLWINM), Shift1Reg).addReg(Ptr1Reg)
        .addImm(3).addImm(27).addImm(is8bit ? 28 : 27);
    BuildMI(BB, dl, TII->get(is64bit ? PPC::XORI8 : PPC::XORI), ShiftReg)
        .addReg(Shift1Reg).addImm(is8bit ? 24 : 16);
    if (is64bit)
      BuildMI(BB, dl, TII->get(PPC::RLDICR), PtrReg)
        .addReg(Ptr1Reg).addImm(0).addImm(61);
    else
      BuildMI(BB, dl, TII->get(PPC::RLWINM), PtrReg)
        .addReg(Ptr1Reg).addImm(0).addImm(0).addImm(29);
    BuildMI(BB, dl, TII->get(PPC::SLW), NewVal2Reg)
        .addReg(newval).addReg(ShiftReg);
    BuildMI(BB, dl, TII->get(PPC::SLW), OldVal2Reg)
        .addReg(oldval).addReg(ShiftReg);
    if (is8bit)
      BuildMI(BB, dl, TII->get(PPC::LI), Mask2Reg).addImm(255);
    else {
      BuildMI(BB, dl, TII->get(PPC::LI), Mask3Reg).addImm(0);
      BuildMI(BB, dl, TII->get(PPC::ORI), Mask2Reg)
        .addReg(Mask3Reg).addImm(65535);
    }
    BuildMI(BB, dl, TII->get(PPC::SLW), MaskReg)
        .addReg(Mask2Reg).addReg(ShiftReg);
    BuildMI(BB, dl, TII->get(PPC::AND), NewVal3Reg)
        .addReg(NewVal2Reg).addReg(MaskReg);
    BuildMI(BB, dl, TII->get(PPC::AND), OldVal3Reg)
        .addReg(OldVal2Reg).addReg(MaskReg);

    BB = loop1MBB;
    BuildMI(BB, dl, TII->get(PPC::LWARX), TmpDestReg)
        .addReg(ZeroReg).addReg(PtrReg);
    BuildMI(BB, dl, TII->get(PPC::AND),TmpReg)
        .addReg(TmpDestReg).addReg(MaskReg);
    BuildMI(BB, dl, TII->get(PPC::CMPW), PPC::CR0)
        .addReg(TmpReg).addReg(OldVal3Reg);
    BuildMI(BB, dl, TII->get(PPC::BCC))
        .addImm(PPC::PRED_NE).addReg(PPC::CR0).addMBB(midMBB);
    BB->addSuccessor(loop2MBB);
    BB->addSuccessor(midMBB);

    BB = loop2MBB;
    BuildMI(BB, dl, TII->get(PPC::ANDC),Tmp2Reg)
        .addReg(TmpDestReg).addReg(MaskReg);
    BuildMI(BB, dl, TII->get(PPC::OR),Tmp4Reg)
        .addReg(Tmp2Reg).addReg(NewVal3Reg);
    BuildMI(BB, dl, TII->get(PPC::STWCX)).addReg(Tmp4Reg)
        .addReg(ZeroReg).addReg(PtrReg);
    BuildMI(BB, dl, TII->get(PPC::BCC))
      .addImm(PPC::PRED_NE).addReg(PPC::CR0).addMBB(loop1MBB);
    BuildMI(BB, dl, TII->get(PPC::B)).addMBB(exitMBB);
    BB->addSuccessor(loop1MBB);
    BB->addSuccessor(exitMBB);

    BB = midMBB;
    BuildMI(BB, dl, TII->get(PPC::STWCX)).addReg(TmpDestReg)
      .addReg(ZeroReg).addReg(PtrReg);
    BB->addSuccessor(exitMBB);

    //  exitMBB:
    //   ...
    BB = exitMBB;
    BuildMI(*BB, BB->begin(), dl, TII->get(PPC::SRW),dest).addReg(TmpReg)
      .addReg(ShiftReg);
  } else if (MI->getOpcode() == PPC::FADDrtz) {
    // This pseudo performs an FADD with rounding mode temporarily forced
    // to round-to-zero.  We emit this via custom inserter since the FPSCR
    // is not modeled at the SelectionDAG level.
    unsigned Dest = MI->getOperand(0).getReg();
    unsigned Src1 = MI->getOperand(1).getReg();
    unsigned Src2 = MI->getOperand(2).getReg();
    DebugLoc dl   = MI->getDebugLoc();

    MachineRegisterInfo &RegInfo = F->getRegInfo();
    unsigned MFFSReg = RegInfo.createVirtualRegister(&PPC::F8RCRegClass);

    // Save FPSCR value.
    BuildMI(*BB, MI, dl, TII->get(PPC::MFFS), MFFSReg);

    // Set rounding mode to round-to-zero.
    BuildMI(*BB, MI, dl, TII->get(PPC::MTFSB1)).addImm(31);
    BuildMI(*BB, MI, dl, TII->get(PPC::MTFSB0)).addImm(30);

    // Perform addition.
    BuildMI(*BB, MI, dl, TII->get(PPC::FADD), Dest).addReg(Src1).addReg(Src2);

    // Restore FPSCR value.
    BuildMI(*BB, MI, dl, TII->get(PPC::MTFSF)).addImm(1).addReg(MFFSReg);
  } else if (MI->getOpcode() == PPC::ANDIo_1_EQ_BIT ||
             MI->getOpcode() == PPC::ANDIo_1_GT_BIT ||
             MI->getOpcode() == PPC::ANDIo_1_EQ_BIT8 ||
             MI->getOpcode() == PPC::ANDIo_1_GT_BIT8) {
    unsigned Opcode = (MI->getOpcode() == PPC::ANDIo_1_EQ_BIT8 ||
                       MI->getOpcode() == PPC::ANDIo_1_GT_BIT8) ?
                      PPC::ANDIo8 : PPC::ANDIo;
    bool isEQ = (MI->getOpcode() == PPC::ANDIo_1_EQ_BIT ||
                 MI->getOpcode() == PPC::ANDIo_1_EQ_BIT8);

    MachineRegisterInfo &RegInfo = F->getRegInfo();
    unsigned Dest = RegInfo.createVirtualRegister(Opcode == PPC::ANDIo ?
                                                  &PPC::GPRCRegClass :
                                                  &PPC::G8RCRegClass);

    DebugLoc dl   = MI->getDebugLoc();
    BuildMI(*BB, MI, dl, TII->get(Opcode), Dest)
      .addReg(MI->getOperand(1).getReg()).addImm(1);
    BuildMI(*BB, MI, dl, TII->get(TargetOpcode::COPY),
            MI->getOperand(0).getReg())
      .addReg(isEQ ? PPC::CR0EQ : PPC::CR0GT);
  } else {
    llvm_unreachable("Unexpected instr type to insert");
  }

  MI->eraseFromParent();   // The pseudo instruction is gone now.
  return BB;
}

//===----------------------------------------------------------------------===//
// Target Optimization Hooks
//===----------------------------------------------------------------------===//

SDValue PPCTargetLowering::DAGCombineFastRecip(SDValue Op,
                                               DAGCombinerInfo &DCI) const {
  if (DCI.isAfterLegalizeVectorOps())
    return SDValue();

  EVT VT = Op.getValueType();

  if ((VT == MVT::f32 && Subtarget.hasFRES()) ||
      (VT == MVT::f64 && Subtarget.hasFRE())  ||
      (VT == MVT::v4f32 && Subtarget.hasAltivec()) ||
      (VT == MVT::v2f64 && Subtarget.hasVSX())) {

    // Newton iteration for a function: F(X) is X_{i+1} = X_i - F(X_i)/F'(X_i)
    // For the reciprocal, we need to find the zero of the function:
    //   F(X) = A X - 1 [which has a zero at X = 1/A]
    //     =>
    //   X_{i+1} = X_i (2 - A X_i) = X_i + X_i (1 - A X_i) [this second form
    //     does not require additional intermediate precision]

    // Convergence is quadratic, so we essentially double the number of digits
    // correct after every iteration. The minimum architected relative
    // accuracy is 2^-5. When hasRecipPrec(), this is 2^-14. IEEE float has
    // 23 digits and double has 52 digits.
    int Iterations = Subtarget.hasRecipPrec() ? 1 : 3;
    if (VT.getScalarType() == MVT::f64)
      ++Iterations;

    SelectionDAG &DAG = DCI.DAG;
    SDLoc dl(Op);

    SDValue FPOne =
      DAG.getConstantFP(1.0, VT.getScalarType());
    if (VT.isVector()) {
      assert(VT.getVectorNumElements() == 4 &&
             "Unknown vector type");
      FPOne = DAG.getNode(ISD::BUILD_VECTOR, dl, VT,
                          FPOne, FPOne, FPOne, FPOne);
    }

    SDValue Est = DAG.getNode(PPCISD::FRE, dl, VT, Op);
    DCI.AddToWorklist(Est.getNode());

    // Newton iterations: Est = Est + Est (1 - Arg * Est)
    for (int i = 0; i < Iterations; ++i) {
      SDValue NewEst = DAG.getNode(ISD::FMUL, dl, VT, Op, Est);
      DCI.AddToWorklist(NewEst.getNode());

      NewEst = DAG.getNode(ISD::FSUB, dl, VT, FPOne, NewEst);
      DCI.AddToWorklist(NewEst.getNode());

      NewEst = DAG.getNode(ISD::FMUL, dl, VT, Est, NewEst);
      DCI.AddToWorklist(NewEst.getNode());

      Est = DAG.getNode(ISD::FADD, dl, VT, Est, NewEst);
      DCI.AddToWorklist(Est.getNode());
    }

    return Est;
  }

  return SDValue();
}

SDValue PPCTargetLowering::DAGCombineFastRecipFSQRT(SDValue Op,
                                             DAGCombinerInfo &DCI) const {
  if (DCI.isAfterLegalizeVectorOps())
    return SDValue();

  EVT VT = Op.getValueType();

  if ((VT == MVT::f32 && Subtarget.hasFRSQRTES()) ||
      (VT == MVT::f64 && Subtarget.hasFRSQRTE())  ||
      (VT == MVT::v4f32 && Subtarget.hasAltivec()) ||
      (VT == MVT::v2f64 && Subtarget.hasVSX())) {

    // Newton iteration for a function: F(X) is X_{i+1} = X_i - F(X_i)/F'(X_i)
    // For the reciprocal sqrt, we need to find the zero of the function:
    //   F(X) = 1/X^2 - A [which has a zero at X = 1/sqrt(A)]
    //     =>
    //   X_{i+1} = X_i (1.5 - A X_i^2 / 2)
    // As a result, we precompute A/2 prior to the iteration loop.

    // Convergence is quadratic, so we essentially double the number of digits
    // correct after every iteration. The minimum architected relative
    // accuracy is 2^-5. When hasRecipPrec(), this is 2^-14. IEEE float has
    // 23 digits and double has 52 digits.
    int Iterations = Subtarget.hasRecipPrec() ? 1 : 3;
    if (VT.getScalarType() == MVT::f64)
      ++Iterations;

    SelectionDAG &DAG = DCI.DAG;
    SDLoc dl(Op);

    SDValue FPThreeHalves =
      DAG.getConstantFP(1.5, VT.getScalarType());
    if (VT.isVector()) {
      assert(VT.getVectorNumElements() == 4 &&
             "Unknown vector type");
      FPThreeHalves = DAG.getNode(ISD::BUILD_VECTOR, dl, VT,
                                  FPThreeHalves, FPThreeHalves,
                                  FPThreeHalves, FPThreeHalves);
    }

    SDValue Est = DAG.getNode(PPCISD::FRSQRTE, dl, VT, Op);
    DCI.AddToWorklist(Est.getNode());

    // We now need 0.5*Arg which we can write as (1.5*Arg - Arg) so that
    // this entire sequence requires only one FP constant.
    SDValue HalfArg = DAG.getNode(ISD::FMUL, dl, VT, FPThreeHalves, Op);
    DCI.AddToWorklist(HalfArg.getNode());

    HalfArg = DAG.getNode(ISD::FSUB, dl, VT, HalfArg, Op);
    DCI.AddToWorklist(HalfArg.getNode());

    // Newton iterations: Est = Est * (1.5 - HalfArg * Est * Est)
    for (int i = 0; i < Iterations; ++i) {
      SDValue NewEst = DAG.getNode(ISD::FMUL, dl, VT, Est, Est);
      DCI.AddToWorklist(NewEst.getNode());

      NewEst = DAG.getNode(ISD::FMUL, dl, VT, HalfArg, NewEst);
      DCI.AddToWorklist(NewEst.getNode());

      NewEst = DAG.getNode(ISD::FSUB, dl, VT, FPThreeHalves, NewEst);
      DCI.AddToWorklist(NewEst.getNode());

      Est = DAG.getNode(ISD::FMUL, dl, VT, Est, NewEst);
      DCI.AddToWorklist(Est.getNode());
    }

    return Est;
  }

  return SDValue();
}

static bool isConsecutiveLSLoc(SDValue Loc, EVT VT, LSBaseSDNode *Base,
                            unsigned Bytes, int Dist,
                            SelectionDAG &DAG) {
  if (VT.getSizeInBits() / 8 != Bytes)
    return false;

  SDValue BaseLoc = Base->getBasePtr();
  if (Loc.getOpcode() == ISD::FrameIndex) {
    if (BaseLoc.getOpcode() != ISD::FrameIndex)
      return false;
    const MachineFrameInfo *MFI = DAG.getMachineFunction().getFrameInfo();
    int FI  = cast<FrameIndexSDNode>(Loc)->getIndex();
    int BFI = cast<FrameIndexSDNode>(BaseLoc)->getIndex();
    int FS  = MFI->getObjectSize(FI);
    int BFS = MFI->getObjectSize(BFI);
    if (FS != BFS || FS != (int)Bytes) return false;
    return MFI->getObjectOffset(FI) == (MFI->getObjectOffset(BFI) + Dist*Bytes);
  }

  // Handle X+C
  if (DAG.isBaseWithConstantOffset(Loc) && Loc.getOperand(0) == BaseLoc &&
      cast<ConstantSDNode>(Loc.getOperand(1))->getSExtValue() == Dist*Bytes)
    return true;

  const TargetLowering &TLI = DAG.getTargetLoweringInfo();
  const GlobalValue *GV1 = nullptr;
  const GlobalValue *GV2 = nullptr;
  int64_t Offset1 = 0;
  int64_t Offset2 = 0;
  bool isGA1 = TLI.isGAPlusOffset(Loc.getNode(), GV1, Offset1);
  bool isGA2 = TLI.isGAPlusOffset(BaseLoc.getNode(), GV2, Offset2);
  if (isGA1 && isGA2 && GV1 == GV2)
    return Offset1 == (Offset2 + Dist*Bytes);
  return false;
}

// Like SelectionDAG::isConsecutiveLoad, but also works for stores, and does
// not enforce equality of the chain operands.
static bool isConsecutiveLS(SDNode *N, LSBaseSDNode *Base,
                            unsigned Bytes, int Dist,
                            SelectionDAG &DAG) {
  if (LSBaseSDNode *LS = dyn_cast<LSBaseSDNode>(N)) {
    EVT VT = LS->getMemoryVT();
    SDValue Loc = LS->getBasePtr();
    return isConsecutiveLSLoc(Loc, VT, Base, Bytes, Dist, DAG);
  }

  if (N->getOpcode() == ISD::INTRINSIC_W_CHAIN) {
    EVT VT;
    switch (cast<ConstantSDNode>(N->getOperand(1))->getZExtValue()) {
    default: return false;
    case Intrinsic::ppc_altivec_lvx:
    case Intrinsic::ppc_altivec_lvxl:
      VT = MVT::v4i32;
      break;
    case Intrinsic::ppc_altivec_lvebx:
      VT = MVT::i8;
      break;
    case Intrinsic::ppc_altivec_lvehx:
      VT = MVT::i16;
      break;
    case Intrinsic::ppc_altivec_lvewx:
      VT = MVT::i32;
      break;
    }

    return isConsecutiveLSLoc(N->getOperand(2), VT, Base, Bytes, Dist, DAG);
  }

  if (N->getOpcode() == ISD::INTRINSIC_VOID) {
    EVT VT;
    switch (cast<ConstantSDNode>(N->getOperand(1))->getZExtValue()) {
    default: return false;
    case Intrinsic::ppc_altivec_stvx:
    case Intrinsic::ppc_altivec_stvxl:
      VT = MVT::v4i32;
      break;
    case Intrinsic::ppc_altivec_stvebx:
      VT = MVT::i8;
      break;
    case Intrinsic::ppc_altivec_stvehx:
      VT = MVT::i16;
      break;
    case Intrinsic::ppc_altivec_stvewx:
      VT = MVT::i32;
      break;
    }

    return isConsecutiveLSLoc(N->getOperand(3), VT, Base, Bytes, Dist, DAG);
  }

  return false;
}

// Return true is there is a nearyby consecutive load to the one provided
// (regardless of alignment). We search up and down the chain, looking though
// token factors and other loads (but nothing else). As a result, a true result
// indicates that it is safe to create a new consecutive load adjacent to the
// load provided.
static bool findConsecutiveLoad(LoadSDNode *LD, SelectionDAG &DAG) {
  SDValue Chain = LD->getChain();
  EVT VT = LD->getMemoryVT();

  SmallSet<SDNode *, 16> LoadRoots;
  SmallVector<SDNode *, 8> Queue(1, Chain.getNode());
  SmallSet<SDNode *, 16> Visited;

  // First, search up the chain, branching to follow all token-factor operands.
  // If we find a consecutive load, then we're done, otherwise, record all
  // nodes just above the top-level loads and token factors.
  while (!Queue.empty()) {
    SDNode *ChainNext = Queue.pop_back_val();
    if (!Visited.insert(ChainNext))
      continue;

    if (MemSDNode *ChainLD = dyn_cast<MemSDNode>(ChainNext)) {
      if (isConsecutiveLS(ChainLD, LD, VT.getStoreSize(), 1, DAG))
        return true;

      if (!Visited.count(ChainLD->getChain().getNode()))
        Queue.push_back(ChainLD->getChain().getNode());
    } else if (ChainNext->getOpcode() == ISD::TokenFactor) {
      for (const SDUse &O : ChainNext->ops())
        if (!Visited.count(O.getNode()))
          Queue.push_back(O.getNode());
    } else
      LoadRoots.insert(ChainNext);
  }

  // Second, search down the chain, starting from the top-level nodes recorded
  // in the first phase. These top-level nodes are the nodes just above all
  // loads and token factors. Starting with their uses, recursively look though
  // all loads (just the chain uses) and token factors to find a consecutive
  // load.
  Visited.clear();
  Queue.clear();

  for (SmallSet<SDNode *, 16>::iterator I = LoadRoots.begin(),
       IE = LoadRoots.end(); I != IE; ++I) {
    Queue.push_back(*I);
       
    while (!Queue.empty()) {
      SDNode *LoadRoot = Queue.pop_back_val();
      if (!Visited.insert(LoadRoot))
        continue;

      if (MemSDNode *ChainLD = dyn_cast<MemSDNode>(LoadRoot))
        if (isConsecutiveLS(ChainLD, LD, VT.getStoreSize(), 1, DAG))
          return true;

      for (SDNode::use_iterator UI = LoadRoot->use_begin(),
           UE = LoadRoot->use_end(); UI != UE; ++UI)
        if (((isa<MemSDNode>(*UI) &&
            cast<MemSDNode>(*UI)->getChain().getNode() == LoadRoot) ||
            UI->getOpcode() == ISD::TokenFactor) && !Visited.count(*UI))
          Queue.push_back(*UI);
    }
  }

  return false;
}

SDValue PPCTargetLowering::DAGCombineTruncBoolExt(SDNode *N,
                                                  DAGCombinerInfo &DCI) const {
  SelectionDAG &DAG = DCI.DAG;
  SDLoc dl(N);

  assert(Subtarget.useCRBits() &&
         "Expecting to be tracking CR bits");
  // If we're tracking CR bits, we need to be careful that we don't have:
  //   trunc(binary-ops(zext(x), zext(y)))
  // or
  //   trunc(binary-ops(binary-ops(zext(x), zext(y)), ...)
  // such that we're unnecessarily moving things into GPRs when it would be
  // better to keep them in CR bits.

  // Note that trunc here can be an actual i1 trunc, or can be the effective
  // truncation that comes from a setcc or select_cc.
  if (N->getOpcode() == ISD::TRUNCATE &&
      N->getValueType(0) != MVT::i1)
    return SDValue();

  if (N->getOperand(0).getValueType() != MVT::i32 &&
      N->getOperand(0).getValueType() != MVT::i64)
    return SDValue();

  if (N->getOpcode() == ISD::SETCC ||
      N->getOpcode() == ISD::SELECT_CC) {
    // If we're looking at a comparison, then we need to make sure that the
    // high bits (all except for the first) don't matter the result.
    ISD::CondCode CC =
      cast<CondCodeSDNode>(N->getOperand(
        N->getOpcode() == ISD::SETCC ? 2 : 4))->get();
    unsigned OpBits = N->getOperand(0).getValueSizeInBits();

    if (ISD::isSignedIntSetCC(CC)) {
      if (DAG.ComputeNumSignBits(N->getOperand(0)) != OpBits ||
          DAG.ComputeNumSignBits(N->getOperand(1)) != OpBits)
        return SDValue();
    } else if (ISD::isUnsignedIntSetCC(CC)) {
      if (!DAG.MaskedValueIsZero(N->getOperand(0),
                                 APInt::getHighBitsSet(OpBits, OpBits-1)) ||
          !DAG.MaskedValueIsZero(N->getOperand(1),
                                 APInt::getHighBitsSet(OpBits, OpBits-1)))
        return SDValue();
    } else {
      // This is neither a signed nor an unsigned comparison, just make sure
      // that the high bits are equal.
      APInt Op1Zero, Op1One;
      APInt Op2Zero, Op2One;
      DAG.computeKnownBits(N->getOperand(0), Op1Zero, Op1One);
      DAG.computeKnownBits(N->getOperand(1), Op2Zero, Op2One);

      // We don't really care about what is known about the first bit (if
      // anything), so clear it in all masks prior to comparing them.
      Op1Zero.clearBit(0); Op1One.clearBit(0);
      Op2Zero.clearBit(0); Op2One.clearBit(0);

      if (Op1Zero != Op2Zero || Op1One != Op2One)
        return SDValue();
    }
  }

  // We now know that the higher-order bits are irrelevant, we just need to
  // make sure that all of the intermediate operations are bit operations, and
  // all inputs are extensions.
  if (N->getOperand(0).getOpcode() != ISD::AND &&
      N->getOperand(0).getOpcode() != ISD::OR  &&
      N->getOperand(0).getOpcode() != ISD::XOR &&
      N->getOperand(0).getOpcode() != ISD::SELECT &&
      N->getOperand(0).getOpcode() != ISD::SELECT_CC &&
      N->getOperand(0).getOpcode() != ISD::TRUNCATE &&
      N->getOperand(0).getOpcode() != ISD::SIGN_EXTEND &&
      N->getOperand(0).getOpcode() != ISD::ZERO_EXTEND &&
      N->getOperand(0).getOpcode() != ISD::ANY_EXTEND)
    return SDValue();

  if ((N->getOpcode() == ISD::SETCC || N->getOpcode() == ISD::SELECT_CC) &&
      N->getOperand(1).getOpcode() != ISD::AND &&
      N->getOperand(1).getOpcode() != ISD::OR  &&
      N->getOperand(1).getOpcode() != ISD::XOR &&
      N->getOperand(1).getOpcode() != ISD::SELECT &&
      N->getOperand(1).getOpcode() != ISD::SELECT_CC &&
      N->getOperand(1).getOpcode() != ISD::TRUNCATE &&
      N->getOperand(1).getOpcode() != ISD::SIGN_EXTEND &&
      N->getOperand(1).getOpcode() != ISD::ZERO_EXTEND &&
      N->getOperand(1).getOpcode() != ISD::ANY_EXTEND)
    return SDValue();

  SmallVector<SDValue, 4> Inputs;
  SmallVector<SDValue, 8> BinOps, PromOps;
  SmallPtrSet<SDNode *, 16> Visited;

  for (unsigned i = 0; i < 2; ++i) {
    if (((N->getOperand(i).getOpcode() == ISD::SIGN_EXTEND ||
          N->getOperand(i).getOpcode() == ISD::ZERO_EXTEND ||
          N->getOperand(i).getOpcode() == ISD::ANY_EXTEND) &&
          N->getOperand(i).getOperand(0).getValueType() == MVT::i1) ||
        isa<ConstantSDNode>(N->getOperand(i)))
      Inputs.push_back(N->getOperand(i));
    else
      BinOps.push_back(N->getOperand(i));

    if (N->getOpcode() == ISD::TRUNCATE)
      break;
  }

  // Visit all inputs, collect all binary operations (and, or, xor and
  // select) that are all fed by extensions. 
  while (!BinOps.empty()) {
    SDValue BinOp = BinOps.back();
    BinOps.pop_back();

    if (!Visited.insert(BinOp.getNode()))
      continue;

    PromOps.push_back(BinOp);

    for (unsigned i = 0, ie = BinOp.getNumOperands(); i != ie; ++i) {
      // The condition of the select is not promoted.
      if (BinOp.getOpcode() == ISD::SELECT && i == 0)
        continue;
      if (BinOp.getOpcode() == ISD::SELECT_CC && i != 2 && i != 3)
        continue;

      if (((BinOp.getOperand(i).getOpcode() == ISD::SIGN_EXTEND ||
            BinOp.getOperand(i).getOpcode() == ISD::ZERO_EXTEND ||
            BinOp.getOperand(i).getOpcode() == ISD::ANY_EXTEND) &&
           BinOp.getOperand(i).getOperand(0).getValueType() == MVT::i1) ||
          isa<ConstantSDNode>(BinOp.getOperand(i))) {
        Inputs.push_back(BinOp.getOperand(i)); 
      } else if (BinOp.getOperand(i).getOpcode() == ISD::AND ||
                 BinOp.getOperand(i).getOpcode() == ISD::OR  ||
                 BinOp.getOperand(i).getOpcode() == ISD::XOR ||
                 BinOp.getOperand(i).getOpcode() == ISD::SELECT ||
                 BinOp.getOperand(i).getOpcode() == ISD::SELECT_CC ||
                 BinOp.getOperand(i).getOpcode() == ISD::TRUNCATE ||
                 BinOp.getOperand(i).getOpcode() == ISD::SIGN_EXTEND ||
                 BinOp.getOperand(i).getOpcode() == ISD::ZERO_EXTEND ||
                 BinOp.getOperand(i).getOpcode() == ISD::ANY_EXTEND) {
        BinOps.push_back(BinOp.getOperand(i));
      } else {
        // We have an input that is not an extension or another binary
        // operation; we'll abort this transformation.
        return SDValue();
      }
    }
  }

  // Make sure that this is a self-contained cluster of operations (which
  // is not quite the same thing as saying that everything has only one
  // use).
  for (unsigned i = 0, ie = Inputs.size(); i != ie; ++i) {
    if (isa<ConstantSDNode>(Inputs[i]))
      continue;

    for (SDNode::use_iterator UI = Inputs[i].getNode()->use_begin(),
                              UE = Inputs[i].getNode()->use_end();
         UI != UE; ++UI) {
      SDNode *User = *UI;
      if (User != N && !Visited.count(User))
        return SDValue();

      // Make sure that we're not going to promote the non-output-value
      // operand(s) or SELECT or SELECT_CC.
      // FIXME: Although we could sometimes handle this, and it does occur in
      // practice that one of the condition inputs to the select is also one of
      // the outputs, we currently can't deal with this.
      if (User->getOpcode() == ISD::SELECT) {
        if (User->getOperand(0) == Inputs[i])
          return SDValue();
      } else if (User->getOpcode() == ISD::SELECT_CC) {
        if (User->getOperand(0) == Inputs[i] ||
            User->getOperand(1) == Inputs[i])
          return SDValue();
      }
    }
  }

  for (unsigned i = 0, ie = PromOps.size(); i != ie; ++i) {
    for (SDNode::use_iterator UI = PromOps[i].getNode()->use_begin(),
                              UE = PromOps[i].getNode()->use_end();
         UI != UE; ++UI) {
      SDNode *User = *UI;
      if (User != N && !Visited.count(User))
        return SDValue();

      // Make sure that we're not going to promote the non-output-value
      // operand(s) or SELECT or SELECT_CC.
      // FIXME: Although we could sometimes handle this, and it does occur in
      // practice that one of the condition inputs to the select is also one of
      // the outputs, we currently can't deal with this.
      if (User->getOpcode() == ISD::SELECT) {
        if (User->getOperand(0) == PromOps[i])
          return SDValue();
      } else if (User->getOpcode() == ISD::SELECT_CC) {
        if (User->getOperand(0) == PromOps[i] ||
            User->getOperand(1) == PromOps[i])
          return SDValue();
      }
    }
  }

  // Replace all inputs with the extension operand.
  for (unsigned i = 0, ie = Inputs.size(); i != ie; ++i) {
    // Constants may have users outside the cluster of to-be-promoted nodes,
    // and so we need to replace those as we do the promotions.
    if (isa<ConstantSDNode>(Inputs[i]))
      continue;
    else
      DAG.ReplaceAllUsesOfValueWith(Inputs[i], Inputs[i].getOperand(0)); 
  }

  // Replace all operations (these are all the same, but have a different
  // (i1) return type). DAG.getNode will validate that the types of
  // a binary operator match, so go through the list in reverse so that
  // we've likely promoted both operands first. Any intermediate truncations or
  // extensions disappear.
  while (!PromOps.empty()) {
    SDValue PromOp = PromOps.back();
    PromOps.pop_back();

    if (PromOp.getOpcode() == ISD::TRUNCATE ||
        PromOp.getOpcode() == ISD::SIGN_EXTEND ||
        PromOp.getOpcode() == ISD::ZERO_EXTEND ||
        PromOp.getOpcode() == ISD::ANY_EXTEND) {
      if (!isa<ConstantSDNode>(PromOp.getOperand(0)) &&
          PromOp.getOperand(0).getValueType() != MVT::i1) {
        // The operand is not yet ready (see comment below).
        PromOps.insert(PromOps.begin(), PromOp);
        continue;
      }

      SDValue RepValue = PromOp.getOperand(0);
      if (isa<ConstantSDNode>(RepValue))
        RepValue = DAG.getNode(ISD::TRUNCATE, dl, MVT::i1, RepValue);

      DAG.ReplaceAllUsesOfValueWith(PromOp, RepValue);
      continue;
    }

    unsigned C;
    switch (PromOp.getOpcode()) {
    default:             C = 0; break;
    case ISD::SELECT:    C = 1; break;
    case ISD::SELECT_CC: C = 2; break;
    }

    if ((!isa<ConstantSDNode>(PromOp.getOperand(C)) &&
         PromOp.getOperand(C).getValueType() != MVT::i1) ||
        (!isa<ConstantSDNode>(PromOp.getOperand(C+1)) &&
         PromOp.getOperand(C+1).getValueType() != MVT::i1)) {
      // The to-be-promoted operands of this node have not yet been
      // promoted (this should be rare because we're going through the
      // list backward, but if one of the operands has several users in
      // this cluster of to-be-promoted nodes, it is possible).
      PromOps.insert(PromOps.begin(), PromOp);
      continue;
    }

    SmallVector<SDValue, 3> Ops(PromOp.getNode()->op_begin(),
                                PromOp.getNode()->op_end());

    // If there are any constant inputs, make sure they're replaced now.
    for (unsigned i = 0; i < 2; ++i)
      if (isa<ConstantSDNode>(Ops[C+i]))
        Ops[C+i] = DAG.getNode(ISD::TRUNCATE, dl, MVT::i1, Ops[C+i]);

    DAG.ReplaceAllUsesOfValueWith(PromOp,
      DAG.getNode(PromOp.getOpcode(), dl, MVT::i1, Ops));
  }

  // Now we're left with the initial truncation itself.
  if (N->getOpcode() == ISD::TRUNCATE)
    return N->getOperand(0);

  // Otherwise, this is a comparison. The operands to be compared have just
  // changed type (to i1), but everything else is the same.
  return SDValue(N, 0);
}

SDValue PPCTargetLowering::DAGCombineExtBoolTrunc(SDNode *N,
                                                  DAGCombinerInfo &DCI) const {
  SelectionDAG &DAG = DCI.DAG;
  SDLoc dl(N);

  // If we're tracking CR bits, we need to be careful that we don't have:
  //   zext(binary-ops(trunc(x), trunc(y)))
  // or
  //   zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...)
  // such that we're unnecessarily moving things into CR bits that can more
  // efficiently stay in GPRs. Note that if we're not certain that the high
  // bits are set as required by the final extension, we still may need to do
  // some masking to get the proper behavior.

  // This same functionality is important on PPC64 when dealing with
  // 32-to-64-bit extensions; these occur often when 32-bit values are used as
  // the return values of functions. Because it is so similar, it is handled
  // here as well.

  if (N->getValueType(0) != MVT::i32 &&
      N->getValueType(0) != MVT::i64)
    return SDValue();

  if (!((N->getOperand(0).getValueType() == MVT::i1 &&
        Subtarget.useCRBits()) ||
       (N->getOperand(0).getValueType() == MVT::i32 &&
        Subtarget.isPPC64())))
    return SDValue();

  if (N->getOperand(0).getOpcode() != ISD::AND &&
      N->getOperand(0).getOpcode() != ISD::OR  &&
      N->getOperand(0).getOpcode() != ISD::XOR &&
      N->getOperand(0).getOpcode() != ISD::SELECT &&
      N->getOperand(0).getOpcode() != ISD::SELECT_CC)
    return SDValue();

  SmallVector<SDValue, 4> Inputs;
  SmallVector<SDValue, 8> BinOps(1, N->getOperand(0)), PromOps;
  SmallPtrSet<SDNode *, 16> Visited;

  // Visit all inputs, collect all binary operations (and, or, xor and
  // select) that are all fed by truncations. 
  while (!BinOps.empty()) {
    SDValue BinOp = BinOps.back();
    BinOps.pop_back();

    if (!Visited.insert(BinOp.getNode()))
      continue;

    PromOps.push_back(BinOp);

    for (unsigned i = 0, ie = BinOp.getNumOperands(); i != ie; ++i) {
      // The condition of the select is not promoted.
      if (BinOp.getOpcode() == ISD::SELECT && i == 0)
        continue;
      if (BinOp.getOpcode() == ISD::SELECT_CC && i != 2 && i != 3)
        continue;

      if (BinOp.getOperand(i).getOpcode() == ISD::TRUNCATE ||
          isa<ConstantSDNode>(BinOp.getOperand(i))) {
        Inputs.push_back(BinOp.getOperand(i)); 
      } else if (BinOp.getOperand(i).getOpcode() == ISD::AND ||
                 BinOp.getOperand(i).getOpcode() == ISD::OR  ||
                 BinOp.getOperand(i).getOpcode() == ISD::XOR ||
                 BinOp.getOperand(i).getOpcode() == ISD::SELECT ||
                 BinOp.getOperand(i).getOpcode() == ISD::SELECT_CC) {
        BinOps.push_back(BinOp.getOperand(i));
      } else {
        // We have an input that is not a truncation or another binary
        // operation; we'll abort this transformation.
        return SDValue();
      }
    }
  }

  // Make sure that this is a self-contained cluster of operations (which
  // is not quite the same thing as saying that everything has only one
  // use).
  for (unsigned i = 0, ie = Inputs.size(); i != ie; ++i) {
    if (isa<ConstantSDNode>(Inputs[i]))
      continue;

    for (SDNode::use_iterator UI = Inputs[i].getNode()->use_begin(),
                              UE = Inputs[i].getNode()->use_end();
         UI != UE; ++UI) {
      SDNode *User = *UI;
      if (User != N && !Visited.count(User))
        return SDValue();

      // Make sure that we're not going to promote the non-output-value
      // operand(s) or SELECT or SELECT_CC.
      // FIXME: Although we could sometimes handle this, and it does occur in
      // practice that one of the condition inputs to the select is also one of
      // the outputs, we currently can't deal with this.
      if (User->getOpcode() == ISD::SELECT) {
        if (User->getOperand(0) == Inputs[i])
          return SDValue();
      } else if (User->getOpcode() == ISD::SELECT_CC) {
        if (User->getOperand(0) == Inputs[i] ||
            User->getOperand(1) == Inputs[i])
          return SDValue();
      }
    }
  }

  for (unsigned i = 0, ie = PromOps.size(); i != ie; ++i) {
    for (SDNode::use_iterator UI = PromOps[i].getNode()->use_begin(),
                              UE = PromOps[i].getNode()->use_end();
         UI != UE; ++UI) {
      SDNode *User = *UI;
      if (User != N && !Visited.count(User))
        return SDValue();

      // Make sure that we're not going to promote the non-output-value
      // operand(s) or SELECT or SELECT_CC.
      // FIXME: Although we could sometimes handle this, and it does occur in
      // practice that one of the condition inputs to the select is also one of
      // the outputs, we currently can't deal with this.
      if (User->getOpcode() == ISD::SELECT) {
        if (User->getOperand(0) == PromOps[i])
          return SDValue();
      } else if (User->getOpcode() == ISD::SELECT_CC) {
        if (User->getOperand(0) == PromOps[i] ||
            User->getOperand(1) == PromOps[i])
          return SDValue();
      }
    }
  }

  unsigned PromBits = N->getOperand(0).getValueSizeInBits();
  bool ReallyNeedsExt = false;
  if (N->getOpcode() != ISD::ANY_EXTEND) {
    // If all of the inputs are not already sign/zero extended, then
    // we'll still need to do that at the end.
    for (unsigned i = 0, ie = Inputs.size(); i != ie; ++i) {
      if (isa<ConstantSDNode>(Inputs[i]))
        continue;

      unsigned OpBits =
        Inputs[i].getOperand(0).getValueSizeInBits();
      assert(PromBits < OpBits && "Truncation not to a smaller bit count?");

      if ((N->getOpcode() == ISD::ZERO_EXTEND &&
           !DAG.MaskedValueIsZero(Inputs[i].getOperand(0),
                                  APInt::getHighBitsSet(OpBits,
                                                        OpBits-PromBits))) ||
          (N->getOpcode() == ISD::SIGN_EXTEND &&
           DAG.ComputeNumSignBits(Inputs[i].getOperand(0)) <
             (OpBits-(PromBits-1)))) {
        ReallyNeedsExt = true;
        break;
      }
    }
  }

  // Replace all inputs, either with the truncation operand, or a
  // truncation or extension to the final output type.
  for (unsigned i = 0, ie = Inputs.size(); i != ie; ++i) {
    // Constant inputs need to be replaced with the to-be-promoted nodes that
    // use them because they might have users outside of the cluster of
    // promoted nodes.
    if (isa<ConstantSDNode>(Inputs[i]))
      continue;

    SDValue InSrc = Inputs[i].getOperand(0);
    if (Inputs[i].getValueType() == N->getValueType(0))
      DAG.ReplaceAllUsesOfValueWith(Inputs[i], InSrc);
    else if (N->getOpcode() == ISD::SIGN_EXTEND)
      DAG.ReplaceAllUsesOfValueWith(Inputs[i],
        DAG.getSExtOrTrunc(InSrc, dl, N->getValueType(0)));
    else if (N->getOpcode() == ISD::ZERO_EXTEND)
      DAG.ReplaceAllUsesOfValueWith(Inputs[i],
        DAG.getZExtOrTrunc(InSrc, dl, N->getValueType(0)));
    else
      DAG.ReplaceAllUsesOfValueWith(Inputs[i],
        DAG.getAnyExtOrTrunc(InSrc, dl, N->getValueType(0)));
  }

  // Replace all operations (these are all the same, but have a different
  // (promoted) return type). DAG.getNode will validate that the types of
  // a binary operator match, so go through the list in reverse so that
  // we've likely promoted both operands first.
  while (!PromOps.empty()) {
    SDValue PromOp = PromOps.back();
    PromOps.pop_back();

    unsigned C;
    switch (PromOp.getOpcode()) {
    default:             C = 0; break;
    case ISD::SELECT:    C = 1; break;
    case ISD::SELECT_CC: C = 2; break;
    }

    if ((!isa<ConstantSDNode>(PromOp.getOperand(C)) &&
         PromOp.getOperand(C).getValueType() != N->getValueType(0)) ||
        (!isa<ConstantSDNode>(PromOp.getOperand(C+1)) &&
         PromOp.getOperand(C+1).getValueType() != N->getValueType(0))) {
      // The to-be-promoted operands of this node have not yet been
      // promoted (this should be rare because we're going through the
      // list backward, but if one of the operands has several users in
      // this cluster of to-be-promoted nodes, it is possible).
      PromOps.insert(PromOps.begin(), PromOp);
      continue;
    }

    SmallVector<SDValue, 3> Ops(PromOp.getNode()->op_begin(),
                                PromOp.getNode()->op_end());

    // If this node has constant inputs, then they'll need to be promoted here.
    for (unsigned i = 0; i < 2; ++i) {
      if (!isa<ConstantSDNode>(Ops[C+i]))
        continue;
      if (Ops[C+i].getValueType() == N->getValueType(0))
        continue;

      if (N->getOpcode() == ISD::SIGN_EXTEND)
        Ops[C+i] = DAG.getSExtOrTrunc(Ops[C+i], dl, N->getValueType(0));
      else if (N->getOpcode() == ISD::ZERO_EXTEND)
        Ops[C+i] = DAG.getZExtOrTrunc(Ops[C+i], dl, N->getValueType(0));
      else
        Ops[C+i] = DAG.getAnyExtOrTrunc(Ops[C+i], dl, N->getValueType(0));
    }

    DAG.ReplaceAllUsesOfValueWith(PromOp,
      DAG.getNode(PromOp.getOpcode(), dl, N->getValueType(0), Ops));
  }

  // Now we're left with the initial extension itself.
  if (!ReallyNeedsExt)
    return N->getOperand(0);

  // To zero extend, just mask off everything except for the first bit (in the
  // i1 case).
  if (N->getOpcode() == ISD::ZERO_EXTEND)
    return DAG.getNode(ISD::AND, dl, N->getValueType(0), N->getOperand(0),
                       DAG.getConstant(APInt::getLowBitsSet(
                                         N->getValueSizeInBits(0), PromBits),
                                       N->getValueType(0)));

  assert(N->getOpcode() == ISD::SIGN_EXTEND &&
         "Invalid extension type");
  EVT ShiftAmountTy = getShiftAmountTy(N->getValueType(0));
  SDValue ShiftCst =
    DAG.getConstant(N->getValueSizeInBits(0)-PromBits, ShiftAmountTy);
  return DAG.getNode(ISD::SRA, dl, N->getValueType(0), 
                     DAG.getNode(ISD::SHL, dl, N->getValueType(0),
                                 N->getOperand(0), ShiftCst), ShiftCst);
}

SDValue PPCTargetLowering::PerformDAGCombine(SDNode *N,
                                             DAGCombinerInfo &DCI) const {
  const TargetMachine &TM = getTargetMachine();
  SelectionDAG &DAG = DCI.DAG;
  SDLoc dl(N);
  switch (N->getOpcode()) {
  default: break;
  case PPCISD::SHL:
    if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(N->getOperand(0))) {
      if (C->isNullValue())   // 0 << V -> 0.
        return N->getOperand(0);
    }
    break;
  case PPCISD::SRL:
    if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(N->getOperand(0))) {
      if (C->isNullValue())   // 0 >>u V -> 0.
        return N->getOperand(0);
    }
    break;
  case PPCISD::SRA:
    if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(N->getOperand(0))) {
      if (C->isNullValue() ||   //  0 >>s V -> 0.
          C->isAllOnesValue())    // -1 >>s V -> -1.
        return N->getOperand(0);
    }
    break;
  case ISD::SIGN_EXTEND:
  case ISD::ZERO_EXTEND:
  case ISD::ANY_EXTEND: 
    return DAGCombineExtBoolTrunc(N, DCI);
  case ISD::TRUNCATE:
  case ISD::SETCC:
  case ISD::SELECT_CC:
    return DAGCombineTruncBoolExt(N, DCI);
  case ISD::FDIV: {
    assert(TM.Options.UnsafeFPMath &&
           "Reciprocal estimates require UnsafeFPMath");

    if (N->getOperand(1).getOpcode() == ISD::FSQRT) {
      SDValue RV =
        DAGCombineFastRecipFSQRT(N->getOperand(1).getOperand(0), DCI);
      if (RV.getNode()) {
        DCI.AddToWorklist(RV.getNode());
        return DAG.getNode(ISD::FMUL, dl, N->getValueType(0),
                           N->getOperand(0), RV);
      }
    } else if (N->getOperand(1).getOpcode() == ISD::FP_EXTEND &&
               N->getOperand(1).getOperand(0).getOpcode() == ISD::FSQRT) {
      SDValue RV =
        DAGCombineFastRecipFSQRT(N->getOperand(1).getOperand(0).getOperand(0),
                                 DCI);
      if (RV.getNode()) {
        DCI.AddToWorklist(RV.getNode());
        RV = DAG.getNode(ISD::FP_EXTEND, SDLoc(N->getOperand(1)),
                         N->getValueType(0), RV);
        DCI.AddToWorklist(RV.getNode());
        return DAG.getNode(ISD::FMUL, dl, N->getValueType(0),
                           N->getOperand(0), RV);
      }
    } else if (N->getOperand(1).getOpcode() == ISD::FP_ROUND &&
               N->getOperand(1).getOperand(0).getOpcode() == ISD::FSQRT) {
      SDValue RV =
        DAGCombineFastRecipFSQRT(N->getOperand(1).getOperand(0).getOperand(0),
                                 DCI);
      if (RV.getNode()) {
        DCI.AddToWorklist(RV.getNode());
        RV = DAG.getNode(ISD::FP_ROUND, SDLoc(N->getOperand(1)),
                         N->getValueType(0), RV,
                         N->getOperand(1).getOperand(1));
        DCI.AddToWorklist(RV.getNode());
        return DAG.getNode(ISD::FMUL, dl, N->getValueType(0),
                           N->getOperand(0), RV);
      }
    }

    SDValue RV = DAGCombineFastRecip(N->getOperand(1), DCI);
    if (RV.getNode()) {
      DCI.AddToWorklist(RV.getNode());
      return DAG.getNode(ISD::FMUL, dl, N->getValueType(0),
                         N->getOperand(0), RV);
    }

    }
    break;
  case ISD::FSQRT: {
    assert(TM.Options.UnsafeFPMath &&
           "Reciprocal estimates require UnsafeFPMath");

    // Compute this as 1/(1/sqrt(X)), which is the reciprocal of the
    // reciprocal sqrt.
    SDValue RV = DAGCombineFastRecipFSQRT(N->getOperand(0), DCI);
    if (RV.getNode()) {
      DCI.AddToWorklist(RV.getNode());
      RV = DAGCombineFastRecip(RV, DCI);
      if (RV.getNode()) {
        // Unfortunately, RV is now NaN if the input was exactly 0. Select out
        // this case and force the answer to 0.

        EVT VT = RV.getValueType();

        SDValue Zero = DAG.getConstantFP(0.0, VT.getScalarType());
        if (VT.isVector()) {
          assert(VT.getVectorNumElements() == 4 && "Unknown vector type");
          Zero = DAG.getNode(ISD::BUILD_VECTOR, dl, VT, Zero, Zero, Zero, Zero);
        }

        SDValue ZeroCmp =
          DAG.getSetCC(dl, getSetCCResultType(*DAG.getContext(), VT),
                       N->getOperand(0), Zero, ISD::SETEQ);
        DCI.AddToWorklist(ZeroCmp.getNode());
        DCI.AddToWorklist(RV.getNode());

        RV = DAG.getNode(VT.isVector() ? ISD::VSELECT : ISD::SELECT, dl, VT,
                         ZeroCmp, Zero, RV);
        return RV;
      }
    }

    }
    break;
  case ISD::SINT_TO_FP:
    if (TM.getSubtarget<PPCSubtarget>().has64BitSupport()) {
      if (N->getOperand(0).getOpcode() == ISD::FP_TO_SINT) {
        // Turn (sint_to_fp (fp_to_sint X)) -> fctidz/fcfid without load/stores.
        // We allow the src/dst to be either f32/f64, but the intermediate
        // type must be i64.
        if (N->getOperand(0).getValueType() == MVT::i64 &&
            N->getOperand(0).getOperand(0).getValueType() != MVT::ppcf128) {
          SDValue Val = N->getOperand(0).getOperand(0);
          if (Val.getValueType() == MVT::f32) {
            Val = DAG.getNode(ISD::FP_EXTEND, dl, MVT::f64, Val);
            DCI.AddToWorklist(Val.getNode());
          }

          Val = DAG.getNode(PPCISD::FCTIDZ, dl, MVT::f64, Val);
          DCI.AddToWorklist(Val.getNode());
          Val = DAG.getNode(PPCISD::FCFID, dl, MVT::f64, Val);
          DCI.AddToWorklist(Val.getNode());
          if (N->getValueType(0) == MVT::f32) {
            Val = DAG.getNode(ISD::FP_ROUND, dl, MVT::f32, Val,
                              DAG.getIntPtrConstant(0));
            DCI.AddToWorklist(Val.getNode());
          }
          return Val;
        } else if (N->getOperand(0).getValueType() == MVT::i32) {
          // If the intermediate type is i32, we can avoid the load/store here
          // too.
        }
      }
    }
    break;
  case ISD::STORE:
    // Turn STORE (FP_TO_SINT F) -> STFIWX(FCTIWZ(F)).
    if (TM.getSubtarget<PPCSubtarget>().hasSTFIWX() &&
        !cast<StoreSDNode>(N)->isTruncatingStore() &&
        N->getOperand(1).getOpcode() == ISD::FP_TO_SINT &&
        N->getOperand(1).getValueType() == MVT::i32 &&
        N->getOperand(1).getOperand(0).getValueType() != MVT::ppcf128) {
      SDValue Val = N->getOperand(1).getOperand(0);
      if (Val.getValueType() == MVT::f32) {
        Val = DAG.getNode(ISD::FP_EXTEND, dl, MVT::f64, Val);
        DCI.AddToWorklist(Val.getNode());
      }
      Val = DAG.getNode(PPCISD::FCTIWZ, dl, MVT::f64, Val);
      DCI.AddToWorklist(Val.getNode());

      SDValue Ops[] = {
        N->getOperand(0), Val, N->getOperand(2),
        DAG.getValueType(N->getOperand(1).getValueType())
      };

      Val = DAG.getMemIntrinsicNode(PPCISD::STFIWX, dl,
              DAG.getVTList(MVT::Other), Ops,
              cast<StoreSDNode>(N)->getMemoryVT(),
              cast<StoreSDNode>(N)->getMemOperand());
      DCI.AddToWorklist(Val.getNode());
      return Val;
    }

    // Turn STORE (BSWAP) -> sthbrx/stwbrx.
    if (cast<StoreSDNode>(N)->isUnindexed() &&
        N->getOperand(1).getOpcode() == ISD::BSWAP &&
        N->getOperand(1).getNode()->hasOneUse() &&
        (N->getOperand(1).getValueType() == MVT::i32 ||
         N->getOperand(1).getValueType() == MVT::i16 ||
         (TM.getSubtarget<PPCSubtarget>().hasLDBRX() &&
          TM.getSubtarget<PPCSubtarget>().isPPC64() &&
          N->getOperand(1).getValueType() == MVT::i64))) {
      SDValue BSwapOp = N->getOperand(1).getOperand(0);
      // Do an any-extend to 32-bits if this is a half-word input.
      if (BSwapOp.getValueType() == MVT::i16)
        BSwapOp = DAG.getNode(ISD::ANY_EXTEND, dl, MVT::i32, BSwapOp);

      SDValue Ops[] = {
        N->getOperand(0), BSwapOp, N->getOperand(2),
        DAG.getValueType(N->getOperand(1).getValueType())
      };
      return
        DAG.getMemIntrinsicNode(PPCISD::STBRX, dl, DAG.getVTList(MVT::Other),
                                Ops, cast<StoreSDNode>(N)->getMemoryVT(),
                                cast<StoreSDNode>(N)->getMemOperand());
    }
    break;
  case ISD::LOAD: {
    LoadSDNode *LD = cast<LoadSDNode>(N);
    EVT VT = LD->getValueType(0);
    Type *Ty = LD->getMemoryVT().getTypeForEVT(*DAG.getContext());
    unsigned ABIAlignment = getDataLayout()->getABITypeAlignment(Ty);
    if (ISD::isNON_EXTLoad(N) && VT.isVector() &&
        TM.getSubtarget<PPCSubtarget>().hasAltivec() &&
        (VT == MVT::v16i8 || VT == MVT::v8i16 ||
         VT == MVT::v4i32 || VT == MVT::v4f32) &&
        LD->getAlignment() < ABIAlignment) {
      // This is a type-legal unaligned Altivec load.
      SDValue Chain = LD->getChain();
      SDValue Ptr = LD->getBasePtr();
      bool isLittleEndian = Subtarget.isLittleEndian();

      // This implements the loading of unaligned vectors as described in
      // the venerable Apple Velocity Engine overview. Specifically:
      // https://developer.apple.com/hardwaredrivers/ve/alignment.html
      // https://developer.apple.com/hardwaredrivers/ve/code_optimization.html
      //
      // The general idea is to expand a sequence of one or more unaligned
      // loads into an alignment-based permutation-control instruction (lvsl
      // or lvsr), a series of regular vector loads (which always truncate
      // their input address to an aligned address), and a series of
      // permutations.  The results of these permutations are the requested
      // loaded values.  The trick is that the last "extra" load is not taken
      // from the address you might suspect (sizeof(vector) bytes after the
      // last requested load), but rather sizeof(vector) - 1 bytes after the
      // last requested vector. The point of this is to avoid a page fault if
      // the base address happened to be aligned. This works because if the
      // base address is aligned, then adding less than a full vector length
      // will cause the last vector in the sequence to be (re)loaded.
      // Otherwise, the next vector will be fetched as you might suspect was
      // necessary.

      // We might be able to reuse the permutation generation from
      // a different base address offset from this one by an aligned amount.
      // The INTRINSIC_WO_CHAIN DAG combine will attempt to perform this
      // optimization later.
      Intrinsic::ID Intr = (isLittleEndian ?
                            Intrinsic::ppc_altivec_lvsr :
                            Intrinsic::ppc_altivec_lvsl);
      SDValue PermCntl = BuildIntrinsicOp(Intr, Ptr, DAG, dl, MVT::v16i8);

      // Create the new MMO for the new base load. It is like the original MMO,
      // but represents an area in memory almost twice the vector size centered
      // on the original address. If the address is unaligned, we might start
      // reading up to (sizeof(vector)-1) bytes below the address of the
      // original unaligned load.
      MachineFunction &MF = DAG.getMachineFunction();
      MachineMemOperand *BaseMMO =
        MF.getMachineMemOperand(LD->getMemOperand(),
                                -LD->getMemoryVT().getStoreSize()+1,
                                2*LD->getMemoryVT().getStoreSize()-1);

      // Create the new base load.
      SDValue LDXIntID = DAG.getTargetConstant(Intrinsic::ppc_altivec_lvx,
                                               getPointerTy());
      SDValue BaseLoadOps[] = { Chain, LDXIntID, Ptr };
      SDValue BaseLoad =
        DAG.getMemIntrinsicNode(ISD::INTRINSIC_W_CHAIN, dl,
                                DAG.getVTList(MVT::v4i32, MVT::Other),
                                BaseLoadOps, MVT::v4i32, BaseMMO);

      // Note that the value of IncOffset (which is provided to the next
      // load's pointer info offset value, and thus used to calculate the
      // alignment), and the value of IncValue (which is actually used to
      // increment the pointer value) are different! This is because we
      // require the next load to appear to be aligned, even though it
      // is actually offset from the base pointer by a lesser amount.
      int IncOffset = VT.getSizeInBits() / 8;
      int IncValue = IncOffset;

      // Walk (both up and down) the chain looking for another load at the real
      // (aligned) offset (the alignment of the other load does not matter in
      // this case). If found, then do not use the offset reduction trick, as
      // that will prevent the loads from being later combined (as they would
      // otherwise be duplicates).
      if (!findConsecutiveLoad(LD, DAG))
        --IncValue;

      SDValue Increment = DAG.getConstant(IncValue, getPointerTy());
      Ptr = DAG.getNode(ISD::ADD, dl, Ptr.getValueType(), Ptr, Increment);

      MachineMemOperand *ExtraMMO =
        MF.getMachineMemOperand(LD->getMemOperand(),
                                1, 2*LD->getMemoryVT().getStoreSize()-1);
      SDValue ExtraLoadOps[] = { Chain, LDXIntID, Ptr };
      SDValue ExtraLoad =
        DAG.getMemIntrinsicNode(ISD::INTRINSIC_W_CHAIN, dl,
                                DAG.getVTList(MVT::v4i32, MVT::Other),
                                ExtraLoadOps, MVT::v4i32, ExtraMMO);

      SDValue TF = DAG.getNode(ISD::TokenFactor, dl, MVT::Other,
        BaseLoad.getValue(1), ExtraLoad.getValue(1));

      // Because vperm has a big-endian bias, we must reverse the order
      // of the input vectors and complement the permute control vector
      // when generating little endian code.  We have already handled the
      // latter by using lvsr instead of lvsl, so just reverse BaseLoad
      // and ExtraLoad here.
      SDValue Perm;
      if (isLittleEndian)
        Perm = BuildIntrinsicOp(Intrinsic::ppc_altivec_vperm,
                                ExtraLoad, BaseLoad, PermCntl, DAG, dl);
      else
        Perm = BuildIntrinsicOp(Intrinsic::ppc_altivec_vperm,
                                BaseLoad, ExtraLoad, PermCntl, DAG, dl);

      if (VT != MVT::v4i32)
        Perm = DAG.getNode(ISD::BITCAST, dl, VT, Perm);

      // The output of the permutation is our loaded result, the TokenFactor is
      // our new chain.
      DCI.CombineTo(N, Perm, TF);
      return SDValue(N, 0);
    }
    }
    break;
  case ISD::INTRINSIC_WO_CHAIN: {
    bool isLittleEndian = Subtarget.isLittleEndian();
    Intrinsic::ID Intr = (isLittleEndian ?
                          Intrinsic::ppc_altivec_lvsr :
                          Intrinsic::ppc_altivec_lvsl);
    if (cast<ConstantSDNode>(N->getOperand(0))->getZExtValue() == Intr &&
        N->getOperand(1)->getOpcode() == ISD::ADD) {
      SDValue Add = N->getOperand(1);

      if (DAG.MaskedValueIsZero(Add->getOperand(1),
            APInt::getAllOnesValue(4 /* 16 byte alignment */).zext(
              Add.getValueType().getScalarType().getSizeInBits()))) {
        SDNode *BasePtr = Add->getOperand(0).getNode();
        for (SDNode::use_iterator UI = BasePtr->use_begin(),
             UE = BasePtr->use_end(); UI != UE; ++UI) {
          if (UI->getOpcode() == ISD::INTRINSIC_WO_CHAIN &&
              cast<ConstantSDNode>(UI->getOperand(0))->getZExtValue() ==
                Intr) {
            // We've found another LVSL/LVSR, and this address is an aligned
            // multiple of that one. The results will be the same, so use the
            // one we've just found instead.

            return SDValue(*UI, 0);
          }
        }
      }
    }
    }

    break;
  case ISD::BSWAP:
    // Turn BSWAP (LOAD) -> lhbrx/lwbrx.
    if (ISD::isNON_EXTLoad(N->getOperand(0).getNode()) &&
        N->getOperand(0).hasOneUse() &&
        (N->getValueType(0) == MVT::i32 || N->getValueType(0) == MVT::i16 ||
         (TM.getSubtarget<PPCSubtarget>().hasLDBRX() &&
          TM.getSubtarget<PPCSubtarget>().isPPC64() &&
          N->getValueType(0) == MVT::i64))) {
      SDValue Load = N->getOperand(0);
      LoadSDNode *LD = cast<LoadSDNode>(Load);
      // Create the byte-swapping load.
      SDValue Ops[] = {
        LD->getChain(),    // Chain
        LD->getBasePtr(),  // Ptr
        DAG.getValueType(N->getValueType(0)) // VT
      };
      SDValue BSLoad =
        DAG.getMemIntrinsicNode(PPCISD::LBRX, dl,
                                DAG.getVTList(N->getValueType(0) == MVT::i64 ?
                                              MVT::i64 : MVT::i32, MVT::Other),
                                Ops, LD->getMemoryVT(), LD->getMemOperand());

      // If this is an i16 load, insert the truncate.
      SDValue ResVal = BSLoad;
      if (N->getValueType(0) == MVT::i16)
        ResVal = DAG.getNode(ISD::TRUNCATE, dl, MVT::i16, BSLoad);

      // First, combine the bswap away.  This makes the value produced by the
      // load dead.
      DCI.CombineTo(N, ResVal);

      // Next, combine the load away, we give it a bogus result value but a real
      // chain result.  The result value is dead because the bswap is dead.
      DCI.CombineTo(Load.getNode(), ResVal, BSLoad.getValue(1));

      // Return N so it doesn't get rechecked!
      return SDValue(N, 0);
    }

    break;
  case PPCISD::VCMP: {
    // If a VCMPo node already exists with exactly the same operands as this
    // node, use its result instead of this node (VCMPo computes both a CR6 and
    // a normal output).
    //
    if (!N->getOperand(0).hasOneUse() &&
        !N->getOperand(1).hasOneUse() &&
        !N->getOperand(2).hasOneUse()) {

      // Scan all of the users of the LHS, looking for VCMPo's that match.
      SDNode *VCMPoNode = nullptr;

      SDNode *LHSN = N->getOperand(0).getNode();
      for (SDNode::use_iterator UI = LHSN->use_begin(), E = LHSN->use_end();
           UI != E; ++UI)
        if (UI->getOpcode() == PPCISD::VCMPo &&
            UI->getOperand(1) == N->getOperand(1) &&
            UI->getOperand(2) == N->getOperand(2) &&
            UI->getOperand(0) == N->getOperand(0)) {
          VCMPoNode = *UI;
          break;
        }

      // If there is no VCMPo node, or if the flag value has a single use, don't
      // transform this.
      if (!VCMPoNode || VCMPoNode->hasNUsesOfValue(0, 1))
        break;

      // Look at the (necessarily single) use of the flag value.  If it has a
      // chain, this transformation is more complex.  Note that multiple things
      // could use the value result, which we should ignore.
      SDNode *FlagUser = nullptr;
      for (SDNode::use_iterator UI = VCMPoNode->use_begin();
           FlagUser == nullptr; ++UI) {
        assert(UI != VCMPoNode->use_end() && "Didn't find user!");
        SDNode *User = *UI;
        for (unsigned i = 0, e = User->getNumOperands(); i != e; ++i) {
          if (User->getOperand(i) == SDValue(VCMPoNode, 1)) {
            FlagUser = User;
            break;
          }
        }
      }

      // If the user is a MFOCRF instruction, we know this is safe.
      // Otherwise we give up for right now.
      if (FlagUser->getOpcode() == PPCISD::MFOCRF)
        return SDValue(VCMPoNode, 0);
    }
    break;
  }
  case ISD::BRCOND: {
    SDValue Cond = N->getOperand(1);
    SDValue Target = N->getOperand(2);
 
    if (Cond.getOpcode() == ISD::INTRINSIC_W_CHAIN &&
        cast<ConstantSDNode>(Cond.getOperand(1))->getZExtValue() ==
          Intrinsic::ppc_is_decremented_ctr_nonzero) {

      // We now need to make the intrinsic dead (it cannot be instruction
      // selected).
      DAG.ReplaceAllUsesOfValueWith(Cond.getValue(1), Cond.getOperand(0));
      assert(Cond.getNode()->hasOneUse() &&
             "Counter decrement has more than one use");

      return DAG.getNode(PPCISD::BDNZ, dl, MVT::Other,
                         N->getOperand(0), Target);
    }
  }
  break;
  case ISD::BR_CC: {
    // If this is a branch on an altivec predicate comparison, lower this so
    // that we don't have to do a MFOCRF: instead, branch directly on CR6.  This
    // lowering is done pre-legalize, because the legalizer lowers the predicate
    // compare down to code that is difficult to reassemble.
    ISD::CondCode CC = cast<CondCodeSDNode>(N->getOperand(1))->get();
    SDValue LHS = N->getOperand(2), RHS = N->getOperand(3);

    // Sometimes the promoted value of the intrinsic is ANDed by some non-zero
    // value. If so, pass-through the AND to get to the intrinsic.
    if (LHS.getOpcode() == ISD::AND &&
        LHS.getOperand(0).getOpcode() == ISD::INTRINSIC_W_CHAIN &&
        cast<ConstantSDNode>(LHS.getOperand(0).getOperand(1))->getZExtValue() ==
          Intrinsic::ppc_is_decremented_ctr_nonzero &&
        isa<ConstantSDNode>(LHS.getOperand(1)) &&
        !cast<ConstantSDNode>(LHS.getOperand(1))->getConstantIntValue()->
          isZero())
      LHS = LHS.getOperand(0);

    if (LHS.getOpcode() == ISD::INTRINSIC_W_CHAIN &&
        cast<ConstantSDNode>(LHS.getOperand(1))->getZExtValue() ==
          Intrinsic::ppc_is_decremented_ctr_nonzero &&
        isa<ConstantSDNode>(RHS)) {
      assert((CC == ISD::SETEQ || CC == ISD::SETNE) &&
             "Counter decrement comparison is not EQ or NE");

      unsigned Val = cast<ConstantSDNode>(RHS)->getZExtValue();
      bool isBDNZ = (CC == ISD::SETEQ && Val) ||
                    (CC == ISD::SETNE && !Val);

      // We now need to make the intrinsic dead (it cannot be instruction
      // selected).
      DAG.ReplaceAllUsesOfValueWith(LHS.getValue(1), LHS.getOperand(0));
      assert(LHS.getNode()->hasOneUse() &&
             "Counter decrement has more than one use");

      return DAG.getNode(isBDNZ ? PPCISD::BDNZ : PPCISD::BDZ, dl, MVT::Other,
                         N->getOperand(0), N->getOperand(4));
    }

    int CompareOpc;
    bool isDot;

    if (LHS.getOpcode() == ISD::INTRINSIC_WO_CHAIN &&
        isa<ConstantSDNode>(RHS) && (CC == ISD::SETEQ || CC == ISD::SETNE) &&
        getAltivecCompareInfo(LHS, CompareOpc, isDot)) {
      assert(isDot && "Can't compare against a vector result!");

      // If this is a comparison against something other than 0/1, then we know
      // that the condition is never/always true.
      unsigned Val = cast<ConstantSDNode>(RHS)->getZExtValue();
      if (Val != 0 && Val != 1) {
        if (CC == ISD::SETEQ)      // Cond never true, remove branch.
          return N->getOperand(0);
        // Always !=, turn it into an unconditional branch.
        return DAG.getNode(ISD::BR, dl, MVT::Other,
                           N->getOperand(0), N->getOperand(4));
      }

      bool BranchOnWhenPredTrue = (CC == ISD::SETEQ) ^ (Val == 0);

      // Create the PPCISD altivec 'dot' comparison node.
      SDValue Ops[] = {
        LHS.getOperand(2),  // LHS of compare
        LHS.getOperand(3),  // RHS of compare
        DAG.getConstant(CompareOpc, MVT::i32)
      };
      EVT VTs[] = { LHS.getOperand(2).getValueType(), MVT::Glue };
      SDValue CompNode = DAG.getNode(PPCISD::VCMPo, dl, VTs, Ops);

      // Unpack the result based on how the target uses it.
      PPC::Predicate CompOpc;
      switch (cast<ConstantSDNode>(LHS.getOperand(1))->getZExtValue()) {
      default:  // Can't happen, don't crash on invalid number though.
      case 0:   // Branch on the value of the EQ bit of CR6.
        CompOpc = BranchOnWhenPredTrue ? PPC::PRED_EQ : PPC::PRED_NE;
        break;
      case 1:   // Branch on the inverted value of the EQ bit of CR6.
        CompOpc = BranchOnWhenPredTrue ? PPC::PRED_NE : PPC::PRED_EQ;
        break;
      case 2:   // Branch on the value of the LT bit of CR6.
        CompOpc = BranchOnWhenPredTrue ? PPC::PRED_LT : PPC::PRED_GE;
        break;
      case 3:   // Branch on the inverted value of the LT bit of CR6.
        CompOpc = BranchOnWhenPredTrue ? PPC::PRED_GE : PPC::PRED_LT;
        break;
      }

      return DAG.getNode(PPCISD::COND_BRANCH, dl, MVT::Other, N->getOperand(0),
                         DAG.getConstant(CompOpc, MVT::i32),
                         DAG.getRegister(PPC::CR6, MVT::i32),
                         N->getOperand(4), CompNode.getValue(1));
    }
    break;
  }
  }

  return SDValue();
}

//===----------------------------------------------------------------------===//
// Inline Assembly Support
//===----------------------------------------------------------------------===//

void PPCTargetLowering::computeKnownBitsForTargetNode(const SDValue Op,
                                                      APInt &KnownZero,
                                                      APInt &KnownOne,
                                                      const SelectionDAG &DAG,
                                                      unsigned Depth) const {
  KnownZero = KnownOne = APInt(KnownZero.getBitWidth(), 0);
  switch (Op.getOpcode()) {
  default: break;
  case PPCISD::LBRX: {
    // lhbrx is known to have the top bits cleared out.
    if (cast<VTSDNode>(Op.getOperand(2))->getVT() == MVT::i16)
      KnownZero = 0xFFFF0000;
    break;
  }
  case ISD::INTRINSIC_WO_CHAIN: {
    switch (cast<ConstantSDNode>(Op.getOperand(0))->getZExtValue()) {
    default: break;
    case Intrinsic::ppc_altivec_vcmpbfp_p:
    case Intrinsic::ppc_altivec_vcmpeqfp_p:
    case Intrinsic::ppc_altivec_vcmpequb_p:
    case Intrinsic::ppc_altivec_vcmpequh_p:
    case Intrinsic::ppc_altivec_vcmpequw_p:
    case Intrinsic::ppc_altivec_vcmpgefp_p:
    case Intrinsic::ppc_altivec_vcmpgtfp_p:
    case Intrinsic::ppc_altivec_vcmpgtsb_p:
    case Intrinsic::ppc_altivec_vcmpgtsh_p:
    case Intrinsic::ppc_altivec_vcmpgtsw_p:
    case Intrinsic::ppc_altivec_vcmpgtub_p:
    case Intrinsic::ppc_altivec_vcmpgtuh_p:
    case Intrinsic::ppc_altivec_vcmpgtuw_p:
      KnownZero = ~1U;  // All bits but the low one are known to be zero.
      break;
    }
  }
  }
}


/// getConstraintType - Given a constraint, return the type of
/// constraint it is for this target.
PPCTargetLowering::ConstraintType
PPCTargetLowering::getConstraintType(const std::string &Constraint) const {
  if (Constraint.size() == 1) {
    switch (Constraint[0]) {
    default: break;
    case 'b':
    case 'r':
    case 'f':
    case 'v':
    case 'y':
      return C_RegisterClass;
    case 'Z':
      // FIXME: While Z does indicate a memory constraint, it specifically
      // indicates an r+r address (used in conjunction with the 'y' modifier
      // in the replacement string). Currently, we're forcing the base
      // register to be r0 in the asm printer (which is interpreted as zero)
      // and forming the complete address in the second register. This is
      // suboptimal.
      return C_Memory;
    }
  } else if (Constraint == "wc") { // individual CR bits.
    return C_RegisterClass;
  } else if (Constraint == "wa" || Constraint == "wd" ||
             Constraint == "wf" || Constraint == "ws") {
    return C_RegisterClass; // VSX registers.
  }
  return TargetLowering::getConstraintType(Constraint);
}

/// Examine constraint type and operand type and determine a weight value.
/// This object must already have been set up with the operand type
/// and the current alternative constraint selected.
TargetLowering::ConstraintWeight
PPCTargetLowering::getSingleConstraintMatchWeight(
    AsmOperandInfo &info, const char *constraint) const {
  ConstraintWeight weight = CW_Invalid;
  Value *CallOperandVal = info.CallOperandVal;
    // If we don't have a value, we can't do a match,
    // but allow it at the lowest weight.
  if (!CallOperandVal)
    return CW_Default;
  Type *type = CallOperandVal->getType();

  // Look at the constraint type.
  if (StringRef(constraint) == "wc" && type->isIntegerTy(1))
    return CW_Register; // an individual CR bit.
  else if ((StringRef(constraint) == "wa" ||
            StringRef(constraint) == "wd" ||
            StringRef(constraint) == "wf") &&
           type->isVectorTy())
    return CW_Register;
  else if (StringRef(constraint) == "ws" && type->isDoubleTy())
    return CW_Register;

  switch (*constraint) {
  default:
    weight = TargetLowering::getSingleConstraintMatchWeight(info, constraint);
    break;
  case 'b':
    if (type->isIntegerTy())
      weight = CW_Register;
    break;
  case 'f':
    if (type->isFloatTy())
      weight = CW_Register;
    break;
  case 'd':
    if (type->isDoubleTy())
      weight = CW_Register;
    break;
  case 'v':
    if (type->isVectorTy())
      weight = CW_Register;
    break;
  case 'y':
    weight = CW_Register;
    break;
  case 'Z':
    weight = CW_Memory;
    break;
  }
  return weight;
}

std::pair<unsigned, const TargetRegisterClass*>
PPCTargetLowering::getRegForInlineAsmConstraint(const std::string &Constraint,
                                                MVT VT) const {
  if (Constraint.size() == 1) {
    // GCC RS6000 Constraint Letters
    switch (Constraint[0]) {
    case 'b':   // R1-R31
      if (VT == MVT::i64 && Subtarget.isPPC64())
        return std::make_pair(0U, &PPC::G8RC_NOX0RegClass);
      return std::make_pair(0U, &PPC::GPRC_NOR0RegClass);
    case 'r':   // R0-R31
      if (VT == MVT::i64 && Subtarget.isPPC64())
        return std::make_pair(0U, &PPC::G8RCRegClass);
      return std::make_pair(0U, &PPC::GPRCRegClass);
    case 'f':
      if (VT == MVT::f32 || VT == MVT::i32)
        return std::make_pair(0U, &PPC::F4RCRegClass);
      if (VT == MVT::f64 || VT == MVT::i64)
        return std::make_pair(0U, &PPC::F8RCRegClass);
      break;
    case 'v':
      return std::make_pair(0U, &PPC::VRRCRegClass);
    case 'y':   // crrc
      return std::make_pair(0U, &PPC::CRRCRegClass);
    }
  } else if (Constraint == "wc") { // an individual CR bit.
    return std::make_pair(0U, &PPC::CRBITRCRegClass);
  } else if (Constraint == "wa" || Constraint == "wd" ||
             Constraint == "wf") {
    return std::make_pair(0U, &PPC::VSRCRegClass);
  } else if (Constraint == "ws") {
    return std::make_pair(0U, &PPC::VSFRCRegClass);
  }

  std::pair<unsigned, const TargetRegisterClass*> R =
    TargetLowering::getRegForInlineAsmConstraint(Constraint, VT);

  // r[0-9]+ are used, on PPC64, to refer to the corresponding 64-bit registers
  // (which we call X[0-9]+). If a 64-bit value has been requested, and a
  // 32-bit GPR has been selected, then 'upgrade' it to the 64-bit parent
  // register.
  // FIXME: If TargetLowering::getRegForInlineAsmConstraint could somehow use
  // the AsmName field from *RegisterInfo.td, then this would not be necessary.
  if (R.first && VT == MVT::i64 && Subtarget.isPPC64() &&
      PPC::GPRCRegClass.contains(R.first)) {
    const TargetRegisterInfo *TRI =
        getTargetMachine().getSubtargetImpl()->getRegisterInfo();
    return std::make_pair(TRI->getMatchingSuperReg(R.first,
                            PPC::sub_32, &PPC::G8RCRegClass),
                          &PPC::G8RCRegClass);
  }

  return R;
}


/// LowerAsmOperandForConstraint - Lower the specified operand into the Ops
/// vector.  If it is invalid, don't add anything to Ops.
void PPCTargetLowering::LowerAsmOperandForConstraint(SDValue Op,
                                                     std::string &Constraint,
                                                     std::vector<SDValue>&Ops,
                                                     SelectionDAG &DAG) const {
  SDValue Result;

  // Only support length 1 constraints.
  if (Constraint.length() > 1) return;

  char Letter = Constraint[0];
  switch (Letter) {
  default: break;
  case 'I':
  case 'J':
  case 'K':
  case 'L':
  case 'M':
  case 'N':
  case 'O':
  case 'P': {
    ConstantSDNode *CST = dyn_cast<ConstantSDNode>(Op);
    if (!CST) return; // Must be an immediate to match.
    unsigned Value = CST->getZExtValue();
    switch (Letter) {
    default: llvm_unreachable("Unknown constraint letter!");
    case 'I':  // "I" is a signed 16-bit constant.
      if ((short)Value == (int)Value)
        Result = DAG.getTargetConstant(Value, Op.getValueType());
      break;
    case 'J':  // "J" is a constant with only the high-order 16 bits nonzero.
    case 'L':  // "L" is a signed 16-bit constant shifted left 16 bits.
      if ((short)Value == 0)
        Result = DAG.getTargetConstant(Value, Op.getValueType());
      break;
    case 'K':  // "K" is a constant with only the low-order 16 bits nonzero.
      if ((Value >> 16) == 0)
        Result = DAG.getTargetConstant(Value, Op.getValueType());
      break;
    case 'M':  // "M" is a constant that is greater than 31.
      if (Value > 31)
        Result = DAG.getTargetConstant(Value, Op.getValueType());
      break;
    case 'N':  // "N" is a positive constant that is an exact power of two.
      if ((int)Value > 0 && isPowerOf2_32(Value))
        Result = DAG.getTargetConstant(Value, Op.getValueType());
      break;
    case 'O':  // "O" is the constant zero.
      if (Value == 0)
        Result = DAG.getTargetConstant(Value, Op.getValueType());
      break;
    case 'P':  // "P" is a constant whose negation is a signed 16-bit constant.
      if ((short)-Value == (int)-Value)
        Result = DAG.getTargetConstant(Value, Op.getValueType());
      break;
    }
    break;
  }
  }

  if (Result.getNode()) {
    Ops.push_back(Result);
    return;
  }

  // Handle standard constraint letters.
  TargetLowering::LowerAsmOperandForConstraint(Op, Constraint, Ops, DAG);
}

// isLegalAddressingMode - Return true if the addressing mode represented
// by AM is legal for this target, for a load/store of the specified type.
bool PPCTargetLowering::isLegalAddressingMode(const AddrMode &AM,
                                              Type *Ty) const {
  // FIXME: PPC does not allow r+i addressing modes for vectors!

  // PPC allows a sign-extended 16-bit immediate field.
  if (AM.BaseOffs <= -(1LL << 16) || AM.BaseOffs >= (1LL << 16)-1)
    return false;

  // No global is ever allowed as a base.
  if (AM.BaseGV)
    return false;

  // PPC only support r+r,
  switch (AM.Scale) {
  case 0:  // "r+i" or just "i", depending on HasBaseReg.
    break;
  case 1:
    if (AM.HasBaseReg && AM.BaseOffs)  // "r+r+i" is not allowed.
      return false;
    // Otherwise we have r+r or r+i.
    break;
  case 2:
    if (AM.HasBaseReg || AM.BaseOffs)  // 2*r+r  or  2*r+i is not allowed.
      return false;
    // Allow 2*r as r+r.
    break;
  default:
    // No other scales are supported.
    return false;
  }

  return true;
}

SDValue PPCTargetLowering::LowerRETURNADDR(SDValue Op,
                                           SelectionDAG &DAG) const {
  MachineFunction &MF = DAG.getMachineFunction();
  MachineFrameInfo *MFI = MF.getFrameInfo();
  MFI->setReturnAddressIsTaken(true);

  if (verifyReturnAddressArgumentIsConstant(Op, DAG))
    return SDValue();

  SDLoc dl(Op);
  unsigned Depth = cast<ConstantSDNode>(Op.getOperand(0))->getZExtValue();

  // Make sure the function does not optimize away the store of the RA to
  // the stack.
  PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>();
  FuncInfo->setLRStoreRequired();
  bool isPPC64 = Subtarget.isPPC64();
  bool isDarwinABI = Subtarget.isDarwinABI();

  if (Depth > 0) {
    SDValue FrameAddr = LowerFRAMEADDR(Op, DAG);
    SDValue Offset =

      DAG.getConstant(PPCFrameLowering::getReturnSaveOffset(isPPC64, isDarwinABI),
                      isPPC64? MVT::i64 : MVT::i32);
    return DAG.getLoad(getPointerTy(), dl, DAG.getEntryNode(),
                       DAG.getNode(ISD::ADD, dl, getPointerTy(),
                                   FrameAddr, Offset),
                       MachinePointerInfo(), false, false, false, 0);
  }

  // Just load the return address off the stack.
  SDValue RetAddrFI = getReturnAddrFrameIndex(DAG);
  return DAG.getLoad(getPointerTy(), dl, DAG.getEntryNode(),
                     RetAddrFI, MachinePointerInfo(), false, false, false, 0);
}

SDValue PPCTargetLowering::LowerFRAMEADDR(SDValue Op,
                                          SelectionDAG &DAG) const {
  SDLoc dl(Op);
  unsigned Depth = cast<ConstantSDNode>(Op.getOperand(0))->getZExtValue();

  EVT PtrVT = DAG.getTargetLoweringInfo().getPointerTy();
  bool isPPC64 = PtrVT == MVT::i64;

  MachineFunction &MF = DAG.getMachineFunction();
  MachineFrameInfo *MFI = MF.getFrameInfo();
  MFI->setFrameAddressIsTaken(true);

  // Naked functions never have a frame pointer, and so we use r1. For all
  // other functions, this decision must be delayed until during PEI.
  unsigned FrameReg;
  if (MF.getFunction()->getAttributes().hasAttribute(
        AttributeSet::FunctionIndex, Attribute::Naked))
    FrameReg = isPPC64 ? PPC::X1 : PPC::R1;
  else
    FrameReg = isPPC64 ? PPC::FP8 : PPC::FP;

  SDValue FrameAddr = DAG.getCopyFromReg(DAG.getEntryNode(), dl, FrameReg,
                                         PtrVT);
  while (Depth--)
    FrameAddr = DAG.getLoad(Op.getValueType(), dl, DAG.getEntryNode(),
                            FrameAddr, MachinePointerInfo(), false, false,
                            false, 0);
  return FrameAddr;
}

// FIXME? Maybe this could be a TableGen attribute on some registers and
// this table could be generated automatically from RegInfo.
unsigned PPCTargetLowering::getRegisterByName(const char* RegName,
                                              EVT VT) const {
  bool isPPC64 = Subtarget.isPPC64();
  bool isDarwinABI = Subtarget.isDarwinABI();

  if ((isPPC64 && VT != MVT::i64 && VT != MVT::i32) ||
      (!isPPC64 && VT != MVT::i32))
    report_fatal_error("Invalid register global variable type");

  bool is64Bit = isPPC64 && VT == MVT::i64;
  unsigned Reg = StringSwitch<unsigned>(RegName)
                   .Case("r1", is64Bit ? PPC::X1 : PPC::R1)
                   .Case("r2", isDarwinABI ? 0 : (is64Bit ? PPC::X2 : PPC::R2))
                   .Case("r13", (!isPPC64 && isDarwinABI) ? 0 :
                                  (is64Bit ? PPC::X13 : PPC::R13))
                   .Default(0);

  if (Reg)
    return Reg;
  report_fatal_error("Invalid register name global variable");
}

bool
PPCTargetLowering::isOffsetFoldingLegal(const GlobalAddressSDNode *GA) const {
  // The PowerPC target isn't yet aware of offsets.
  return false;
}

bool PPCTargetLowering::getTgtMemIntrinsic(IntrinsicInfo &Info,
                                           const CallInst &I,
                                           unsigned Intrinsic) const {

  switch (Intrinsic) {
  case Intrinsic::ppc_altivec_lvx:
  case Intrinsic::ppc_altivec_lvxl:
  case Intrinsic::ppc_altivec_lvebx:
  case Intrinsic::ppc_altivec_lvehx:
  case Intrinsic::ppc_altivec_lvewx: {
    EVT VT;
    switch (Intrinsic) {
    case Intrinsic::ppc_altivec_lvebx:
      VT = MVT::i8;
      break;
    case Intrinsic::ppc_altivec_lvehx:
      VT = MVT::i16;
      break;
    case Intrinsic::ppc_altivec_lvewx:
      VT = MVT::i32;
      break;
    default:
      VT = MVT::v4i32;
      break;
    }

    Info.opc = ISD::INTRINSIC_W_CHAIN;
    Info.memVT = VT;
    Info.ptrVal = I.getArgOperand(0);
    Info.offset = -VT.getStoreSize()+1;
    Info.size = 2*VT.getStoreSize()-1;
    Info.align = 1;
    Info.vol = false;
    Info.readMem = true;
    Info.writeMem = false;
    return true;
  }
  case Intrinsic::ppc_altivec_stvx:
  case Intrinsic::ppc_altivec_stvxl:
  case Intrinsic::ppc_altivec_stvebx:
  case Intrinsic::ppc_altivec_stvehx:
  case Intrinsic::ppc_altivec_stvewx: {
    EVT VT;
    switch (Intrinsic) {
    case Intrinsic::ppc_altivec_stvebx:
      VT = MVT::i8;
      break;
    case Intrinsic::ppc_altivec_stvehx:
      VT = MVT::i16;
      break;
    case Intrinsic::ppc_altivec_stvewx:
      VT = MVT::i32;
      break;
    default:
      VT = MVT::v4i32;
      break;
    }

    Info.opc = ISD::INTRINSIC_VOID;
    Info.memVT = VT;
    Info.ptrVal = I.getArgOperand(1);
    Info.offset = -VT.getStoreSize()+1;
    Info.size = 2*VT.getStoreSize()-1;
    Info.align = 1;
    Info.vol = false;
    Info.readMem = false;
    Info.writeMem = true;
    return true;
  }
  default:
    break;
  }

  return false;
}

/// getOptimalMemOpType - Returns the target specific optimal type for load
/// and store operations as a result of memset, memcpy, and memmove
/// lowering. If DstAlign is zero that means it's safe to destination
/// alignment can satisfy any constraint. Similarly if SrcAlign is zero it
/// means there isn't a need to check it against alignment requirement,
/// probably because the source does not need to be loaded. If 'IsMemset' is
/// true, that means it's expanding a memset. If 'ZeroMemset' is true, that
/// means it's a memset of zero. 'MemcpyStrSrc' indicates whether the memcpy
/// source is constant so it does not need to be loaded.
/// It returns EVT::Other if the type should be determined using generic
/// target-independent logic.
EVT PPCTargetLowering::getOptimalMemOpType(uint64_t Size,
                                           unsigned DstAlign, unsigned SrcAlign,
                                           bool IsMemset, bool ZeroMemset,
                                           bool MemcpyStrSrc,
                                           MachineFunction &MF) const {
  if (Subtarget.isPPC64()) {
    return MVT::i64;
  } else {
    return MVT::i32;
  }
}

/// \brief Returns true if it is beneficial to convert a load of a constant
/// to just the constant itself.
bool PPCTargetLowering::shouldConvertConstantLoadToIntImm(const APInt &Imm,
                                                          Type *Ty) const {
  assert(Ty->isIntegerTy());

  unsigned BitSize = Ty->getPrimitiveSizeInBits();
  if (BitSize == 0 || BitSize > 64)
    return false;
  return true;
}

bool PPCTargetLowering::isTruncateFree(Type *Ty1, Type *Ty2) const {
  if (!Ty1->isIntegerTy() || !Ty2->isIntegerTy())
    return false;
  unsigned NumBits1 = Ty1->getPrimitiveSizeInBits();
  unsigned NumBits2 = Ty2->getPrimitiveSizeInBits();
  return NumBits1 == 64 && NumBits2 == 32;
}

bool PPCTargetLowering::isTruncateFree(EVT VT1, EVT VT2) const {
  if (!VT1.isInteger() || !VT2.isInteger())
    return false;
  unsigned NumBits1 = VT1.getSizeInBits();
  unsigned NumBits2 = VT2.getSizeInBits();
  return NumBits1 == 64 && NumBits2 == 32;
}

bool PPCTargetLowering::isLegalICmpImmediate(int64_t Imm) const {
  return isInt<16>(Imm) || isUInt<16>(Imm);
}

bool PPCTargetLowering::isLegalAddImmediate(int64_t Imm) const {
  return isInt<16>(Imm) || isUInt<16>(Imm);
}

bool PPCTargetLowering::allowsMisalignedMemoryAccesses(EVT VT,
                                                       unsigned,
                                                       unsigned,
                                                       bool *Fast) const {
  if (DisablePPCUnaligned)
    return false;

  // PowerPC supports unaligned memory access for simple non-vector types.
  // Although accessing unaligned addresses is not as efficient as accessing
  // aligned addresses, it is generally more efficient than manual expansion,
  // and generally only traps for software emulation when crossing page
  // boundaries.

  if (!VT.isSimple())
    return false;

  if (VT.getSimpleVT().isVector()) {
    if (Subtarget.hasVSX()) {
      if (VT != MVT::v2f64 && VT != MVT::v2i64)
        return false;
    } else {
      return false;
    }
  }

  if (VT == MVT::ppcf128)
    return false;

  if (Fast)
    *Fast = true;

  return true;
}

bool PPCTargetLowering::isFMAFasterThanFMulAndFAdd(EVT VT) const {
  VT = VT.getScalarType();

  if (!VT.isSimple())
    return false;

  switch (VT.getSimpleVT().SimpleTy) {
  case MVT::f32:
  case MVT::f64:
    return true;
  default:
    break;
  }

  return false;
}

bool
PPCTargetLowering::shouldExpandBuildVectorWithShuffles(
                     EVT VT , unsigned DefinedValues) const {
  if (VT == MVT::v2i64)
    return false;

  return TargetLowering::shouldExpandBuildVectorWithShuffles(VT, DefinedValues);
}

Sched::Preference PPCTargetLowering::getSchedulingPreference(SDNode *N) const {
  if (DisableILPPref || Subtarget.enableMachineScheduler())
    return TargetLowering::getSchedulingPreference(N);

  return Sched::ILP;
}

// Create a fast isel object.
FastISel *
PPCTargetLowering::createFastISel(FunctionLoweringInfo &FuncInfo,
                                  const TargetLibraryInfo *LibInfo) const {
  return PPC::createFastISel(FuncInfo, LibInfo);
}