blob: 37ed4a76fd8cdcdf18fb3f13a8124997f53d6a10 [file] [log] [blame]
David Blaikiebb279112018-11-13 20:08:10 +00001; RUN: llc -filetype=asm -mtriple=x86_64-pc-linux-gnu %s -o - | FileCheck %s
David Blaikie71812e32018-07-18 20:37:01 +00002; RUN: llc -filetype=asm -mtriple=x86_64-pc-linux-gnu %s -o - -dwarf-version 5 | FileCheck --check-prefix=DWARF5 %s
David Blaikie89c81a02017-07-30 22:10:00 +00003
4; Group ranges in a range list that apply to the same section and use a base
5; address selection entry to reduce the number of relocations to one reloc per
David Blaikied6614052018-07-18 18:04:42 +00006; section per range list. DWARF5 debug_rnglist (with *x variants) are more
7; efficient than this in terms of relocations, but it's still better than one
8; reloc per entry in a range list.
David Blaikie89c81a02017-07-30 22:10:00 +00009
10; This is an object/executable size tradeoff - shrinking objects, but growing
11; the linked executable. In one large binary tested, total object size (not just
12; debug info) shrank by 16%, entirely relocation entries. Linked executable
13; grew by 4%. This was with compressed debug info in the objects, uncompressed
14; in the linked executable. Without compression in the objects, the win would be
15; smaller (the growth of debug_ranges itself would be more significant).
16
David Blaikiebb279112018-11-13 20:08:10 +000017; This is a merged module containing two CUs, one that uses range base address
18; specifiers and exercises different cases there, and another that does not
David Blaikie14cfa0d2018-10-20 09:16:49 +000019
David Blaikiebb279112018-11-13 20:08:10 +000020; ranges.cpp
21; Single range entry
22; __attribute__((section("a"))) void f1() {}
23; Single address with two ranges due to the whole caused by f3
24; __attribute__((section("b"))) void f2() {}
25; __attribute__((section("b"))) __attribute__((nodebug)) void f3() {}
26; __attribute__((section("b"))) void f4() {}
27; Reset the base address & emit a couple more single range entries
28; __attribute__((section("c"))) void f5() {}
29; __attribute__((section("d"))) void f6() {}
30; ranges_no_base.cpp:
31; Include enough complexity to cause ranges to be emitted, so it can be checked
32; that those ranges don't use base address specifiers
33; __attribute__((section("e"))) void f7() {}
34; __attribute__((section("f"))) void f8() {}
35
36; CHECK: {{^.Ldebug_ranges0}}
37; CHECK-NEXT: .quad -1
38; CHECK-NEXT: .quad .Lfunc_begin0
39; CHECK-NEXT: .quad .Lfunc_begin0-.Lfunc_begin0
40; CHECK-NEXT: .quad .Lfunc_end0-.Lfunc_begin0
41; CHECK-NEXT: .quad -1
42; CHECK-NEXT: .quad .Lfunc_begin1
43; CHECK-NEXT: .quad .Lfunc_begin1-.Lfunc_begin1
44; CHECK-NEXT: .quad .Lfunc_end1-.Lfunc_begin1
45; CHECK-NEXT: .quad .Lfunc_begin3-.Lfunc_begin1
46; CHECK-NEXT: .quad .Lfunc_end3-.Lfunc_begin1
47; CHECK-NEXT: .quad -1
48; CHECK-NEXT: .quad .Lfunc_begin4
49; CHECK-NEXT: .quad .Lfunc_begin4-.Lfunc_begin4
50; CHECK-NEXT: .quad .Lfunc_end4-.Lfunc_begin4
51; CHECK-NEXT: .quad -1
52; CHECK-NEXT: .quad .Lfunc_begin5
53; CHECK-NEXT: .quad .Lfunc_begin5-.Lfunc_begin5
54; CHECK-NEXT: .quad .Lfunc_end5-.Lfunc_begin5
55; CHECK-NEXT: .quad 0
56; CHECK-NEXT: .quad 0
57; CHECK-NEXT: {{^.Ldebug_ranges1}}
58; CHECK-NEXT: .quad .Lfunc_begin6
59; CHECK-NEXT: .quad .Lfunc_end6
60; CHECK-NEXT: .quad .Lfunc_begin7
61; CHECK-NEXT: .quad .Lfunc_end7
David Blaikie89c81a02017-07-30 22:10:00 +000062
David Blaikied6614052018-07-18 18:04:42 +000063; DWARF5: {{^.Ldebug_ranges0}}
David Blaikiec4af8bf2018-10-20 07:36:39 +000064; DWARF5-NEXT: # DW_RLE_startx_length
65; DWARF5-NEXT: .byte 0 # start index
David Blaikied6614052018-07-18 18:04:42 +000066; DWARF5-NEXT: .uleb128 .Lfunc_end0-.Lfunc_begin0 # length
David Blaikiec4af8bf2018-10-20 07:36:39 +000067; DWARF5-NEXT: # DW_RLE_base_addressx
68; DWARF5-NEXT: .byte 1 # base address index
David Blaikied6614052018-07-18 18:04:42 +000069; DWARF5-NEXT: # DW_RLE_offset_pair
70; DWARF5-NEXT: .uleb128 .Lfunc_begin1-.Lfunc_begin1 # starting offset
71; DWARF5-NEXT: .uleb128 .Lfunc_end1-.Lfunc_begin1 # ending offset
72; DWARF5-NEXT: # DW_RLE_offset_pair
73; DWARF5-NEXT: .uleb128 .Lfunc_begin3-.Lfunc_begin1 # starting offset
74; DWARF5-NEXT: .uleb128 .Lfunc_end3-.Lfunc_begin1 # ending offset
David Blaikiec4af8bf2018-10-20 07:36:39 +000075; DWARF5-NEXT: # DW_RLE_startx_length
76; DWARF5-NEXT: .byte 3 # start index
David Blaikied6614052018-07-18 18:04:42 +000077; DWARF5-NEXT: .uleb128 .Lfunc_end4-.Lfunc_begin4 # length
David Blaikiec4af8bf2018-10-20 07:36:39 +000078; DWARF5-NEXT: # DW_RLE_startx_length
79; DWARF5-NEXT: .byte 4 # start index
David Blaikied6614052018-07-18 18:04:42 +000080; DWARF5-NEXT: .uleb128 .Lfunc_end5-.Lfunc_begin5 # length
81; DWARF5-NEXT: # DW_RLE_end_of_list
David Blaikiebb279112018-11-13 20:08:10 +000082; DWARF5-NEXT: {{^.Ldebug_ranges1}}
83; DWARF5-NEXT: # DW_RLE_startx_length
84; DWARF5-NEXT: .byte 5 # start index
85; DWARF5-NEXT: .uleb128 .Lfunc_end6-.Lfunc_begin6 # length
86; DWARF5-NEXT: # DW_RLE_startx_length
87; DWARF5-NEXT: .byte 6 # start index
88; DWARF5-NEXT: .uleb128 .Lfunc_end7-.Lfunc_begin7 # length
89; DWARF5-NEXT: # DW_RLE_end_of_list
David Blaikied6614052018-07-18 18:04:42 +000090
David Blaikie89c81a02017-07-30 22:10:00 +000091; Function Attrs: noinline nounwind optnone uwtable
David Blaikiebb279112018-11-13 20:08:10 +000092define dso_local void @_Z2f1v() section "a" !dbg !9 {
David Blaikie89c81a02017-07-30 22:10:00 +000093entry:
94 ret void, !dbg !12
95}
96
97; Function Attrs: noinline nounwind optnone uwtable
David Blaikiebb279112018-11-13 20:08:10 +000098define dso_local void @_Z2f2v() section "b" !dbg !13 {
David Blaikie89c81a02017-07-30 22:10:00 +000099entry:
100 ret void, !dbg !14
101}
102
David Blaikie4dd66372017-07-31 00:18:24 +0000103; Function Attrs: noinline nounwind optnone uwtable
David Blaikiebb279112018-11-13 20:08:10 +0000104define dso_local void @_Z2f3v() section "b" {
105entry:
106 ret void
107}
108
109; Function Attrs: noinline nounwind optnone uwtable
110define dso_local void @_Z2f4v() section "b" !dbg !15 {
David Blaikie4dd66372017-07-31 00:18:24 +0000111entry:
112 ret void, !dbg !16
113}
114
115; Function Attrs: noinline nounwind optnone uwtable
David Blaikiebb279112018-11-13 20:08:10 +0000116define dso_local void @_Z2f5v() section "c" !dbg !17 {
David Blaikie4dd66372017-07-31 00:18:24 +0000117entry:
118 ret void, !dbg !18
119}
120
David Blaikiebb279112018-11-13 20:08:10 +0000121; Function Attrs: noinline nounwind optnone uwtable
122define dso_local void @_Z2f6v() section "d" !dbg !19 {
123entry:
124 ret void, !dbg !20
125}
David Blaikie89c81a02017-07-30 22:10:00 +0000126
David Blaikiebb279112018-11-13 20:08:10 +0000127; Function Attrs: noinline nounwind optnone uwtable
128define dso_local void @_Z2f7v() section "e" !dbg !21 {
129entry:
130 ret void, !dbg !22
131}
David Blaikie89c81a02017-07-30 22:10:00 +0000132
David Blaikiebb279112018-11-13 20:08:10 +0000133; Function Attrs: noinline nounwind optnone uwtable
134define dso_local void @_Z2f8v() section "f" !dbg !23 {
135entry:
136 ret void, !dbg !24
137}
138
139!llvm.dbg.cu = !{!0, !3}
140!llvm.ident = !{!5, !5}
141!llvm.module.flags = !{!6, !7, !8}
142
David Blaikieb350c662019-12-30 22:32:08 -0800143!0 = distinct !DICompileUnit(language: DW_LANG_C_plus_plus, file: !1, producer: "clang version 8.0.0 (trunk 346343) (llvm/trunk 346350)", isOptimized: false, runtimeVersion: 0, emissionKind: FullDebug, enums: !2, nameTableKind: None, debugBaseAddress: true)
David Blaikiebb279112018-11-13 20:08:10 +0000144!1 = !DIFile(filename: "ranges.cpp", directory: "/usr/local/google/home/blaikie/dev/scratch")
David Blaikie89c81a02017-07-30 22:10:00 +0000145!2 = !{}
David Blaikiebb279112018-11-13 20:08:10 +0000146!3 = distinct !DICompileUnit(language: DW_LANG_C_plus_plus, file: !4, producer: "clang version 8.0.0 (trunk 346343) (llvm/trunk 346350)", isOptimized: false, runtimeVersion: 0, emissionKind: FullDebug, enums: !2, nameTableKind: None)
147!4 = !DIFile(filename: "ranges_no_base.cpp", directory: "/usr/local/google/home/blaikie/dev/scratch")
148!5 = !{!"clang version 8.0.0 (trunk 346343) (llvm/trunk 346350)"}
149!6 = !{i32 2, !"Dwarf Version", i32 4}
150!7 = !{i32 2, !"Debug Info Version", i32 3}
151!8 = !{i32 1, !"wchar_size", i32 4}
152!9 = distinct !DISubprogram(name: "f1", linkageName: "_Z2f1v", scope: !1, file: !1, line: 1, type: !10, isLocal: false, isDefinition: true, scopeLine: 1, flags: DIFlagPrototyped, isOptimized: false, unit: !0, retainedNodes: !2)
153!10 = !DISubroutineType(types: !11)
154!11 = !{null}
155!12 = !DILocation(line: 1, column: 42, scope: !9)
156!13 = distinct !DISubprogram(name: "f2", linkageName: "_Z2f2v", scope: !1, file: !1, line: 2, type: !10, isLocal: false, isDefinition: true, scopeLine: 2, flags: DIFlagPrototyped, isOptimized: false, unit: !0, retainedNodes: !2)
157!14 = !DILocation(line: 2, column: 42, scope: !13)
158!15 = distinct !DISubprogram(name: "f4", linkageName: "_Z2f4v", scope: !1, file: !1, line: 4, type: !10, isLocal: false, isDefinition: true, scopeLine: 4, flags: DIFlagPrototyped, isOptimized: false, unit: !0, retainedNodes: !2)
159!16 = !DILocation(line: 4, column: 42, scope: !15)
160!17 = distinct !DISubprogram(name: "f5", linkageName: "_Z2f5v", scope: !1, file: !1, line: 5, type: !10, isLocal: false, isDefinition: true, scopeLine: 5, flags: DIFlagPrototyped, isOptimized: false, unit: !0, retainedNodes: !2)
161!18 = !DILocation(line: 5, column: 42, scope: !17)
162!19 = distinct !DISubprogram(name: "f6", linkageName: "_Z2f6v", scope: !1, file: !1, line: 6, type: !10, isLocal: false, isDefinition: true, scopeLine: 6, flags: DIFlagPrototyped, isOptimized: false, unit: !0, retainedNodes: !2)
163!20 = !DILocation(line: 6, column: 42, scope: !19)
164!21 = distinct !DISubprogram(name: "f7", linkageName: "_Z2f7v", scope: !4, file: !4, line: 1, type: !10, isLocal: false, isDefinition: true, scopeLine: 1, flags: DIFlagPrototyped, isOptimized: false, unit: !3, retainedNodes: !2)
165!22 = !DILocation(line: 1, column: 42, scope: !21)
166!23 = distinct !DISubprogram(name: "f8", linkageName: "_Z2f8v", scope: !4, file: !4, line: 2, type: !10, isLocal: false, isDefinition: true, scopeLine: 2, flags: DIFlagPrototyped, isOptimized: false, unit: !3, retainedNodes: !2)
167!24 = !DILocation(line: 2, column: 42, scope: !23)